Angle Seat Globe Control Valve, Metal
|
|
- Emery Morris
- 6 years ago
- Views:
Transcription
1 Angle Seat Globe Control Valve, Metal Construction The GEMÜ /-way angle seat globe control valve is designed for demanding flow control applications. It can be paired with the GEMÜ 434 µpos, GEMÜ 435 epos positioners or the GEMÜ 436 cpos positioner and process controller dependent on the control requirements (for features see page ). The positioners are specially designed for GEMÜ valves and achieve optimum results when used as a system. The valve spindle is sealed by a self-adjusting gland packing providing low maintenance and reliable sealing even after a long service life with high cycle duties. A wiper ring protects the gland packing against contamination and damage. GEMÜ µpos Features Linear or modified equal-percentage control characteristics Kv values from approx m³/h, depending on nominal, valve seat and regulating cone design PID control system can be implemented with GEMÜ 436 Suitable for inert, corrosive*, liquid and gaseous media and steam Max. operating pressure 5 bar Max. operating temperature 80 C Advantages Simple and fast commissioning Good flow capability and compact design Valve and positioner are optimally adapted to each other. (For positioner details please refer to the relevant data sheets) Optionally suitable for contact with food according to Regulation (EC) No. 935/004 (K-No. 03) Standard gland packing suitable for vacuum up to 0 mbar (abs.) *see information on working medium on page GEMÜ epos Sectional drawing GEMÜ cpos
2 Technical data Working medium Corrosive, inert, gaseous and liquid media and steam which have no negative impact on the physical and chemical properties of the body and seal material. Max. perm. pressure of working medium see table Media temperature -0 to 80 C Max. permissible viscosity 600 mm²/s (cst) Ambient conditions Max. ambient temperature 60 C Control medium Inert gases, max. 60 C Filling volume 0: 0.0 dm³ : 0.5 dm³ : 0.65 dm³ Control pressure [bar] Normally closed (NC) ( 0-40) 5-7 ( ) Maximum permissible seat leakage class Seat seal Standard Test procedure Leakage rate Test medium PTFE DIN EN VI air Metal DIN EN IV air Connection code Pressure / temperature correlation for angle seat globe valve bodies Material code Max. allowable operating pressures in bar at temperature C* RT , 3C, 3D, 9 (to ) , 9 (up 65) , 9, 7, 37, 60, 3C, 3D , 6, 7, 8, 37, 59, ( 5 - ) , 88 ( 5-40) ** , 88 ( - 80) ** ( 5-3) ** ( 40-65) ** ( 5-40) ** ( - 65) ** ( 5 - ) A, B, 59 C * The valves can be used down to -0 C ** max. temperature 40 C RT = Room Temperature All pressures are gauge pressures. Correlation* Kv value, operating pressure, regulating cone number Valve body material: RG 5 (code 9),.4435 (code 34, C),.4408 (code 37) Nominal Kv value Operating Regulating cone number [m³/h] pressure [bar] linear equal-percentage (mod.) RS00 RS0 5.0 RS000 RS RS00 RS0 0.0 RS003 RS RS004 RS RS080 RS RS005 RS RS08 RS09.0 RS006 RS RS08 RS RS007 RS07 * not for connection code 37, 59, 80, 88; standard regulating cone - see following table
3 Technical data Correlation Kv value, operating pressure, regulating cone number Valve body material:.4435 (code 34, C) ),.4408 (code 37) Nominal Kv value Operating Regulating cone no. [m³/h] pressure [bar] linear equal-percentage (mod.) Correlation* Kv value, operating pressure, regulating cone number Valve body material:.4435 (code 34),.4435 (code C) Nominal Kv value Operating Regulating cone number [m³/h] pressure [bar] linear equal-percentage (mod.) RS05 RS RS0 RS RS05 RS RS053 RS RS054 RS * only for connection code 37, 59, 80, 88; 4.5 RS078 RS048.0 RS056 RS RS079 RS RS057 RS ) 5 RA0 RA ) 5 RB0 RA ) 5 RB0 RB ) 5 RB03 RB ) 5 RC0 RC40.00 ) 5 RC0 RC RD0 RD40. 3) 5 RE0 RE RD0 RD40. 5 RE0 RE RF0 RF ) 5 RG0 RG40. 5 RE03 RE RF0 RF RG0 RG ) 5 RH0 RH RF03 RF RG03 RG RH0 RH RJ0 RJ RG04 RG RH03 RH RJ0 RJ RK0 RK RH04 RH RJ03 RJ RK0 RK RM0 RM40 ) Angle seat globe valve bodies with valve body material code C and reduced seat have a surface roughness of Ra. µm due to the reduction in the seat area. ) 3) metal seated (with no soft seat) not for connection code 37, 59, 80, 88 3
4 Technical data Kv values [%] linear Example Kv value diagram Kv values [%] Stroke [%] Stroke [%] equal-percentage modified The adjacent diagram shows the approximative curve of the Kv value characteristic. The characteristic may deviate dependent on valve body, nominal, regulating cone and valve stroke. Note: Regulating needle: RAxxx - RCxxx (reduced valve seat) Regulating cone: 5 - Regulating cone Regulating needle 4
5 Order data Body configuration /-way body Angle body only in material code 37 ( 5 - ) Code D E Seat seal Code PTFE 5 PTFE, glass fibre reinforced 5G Steel (standard up to Kv value.00 m³/h) 0* * R-No. on request Connection Code Butt weld spigots Spigots DIN 0 Spigots EN 0357 series B 6 Spigots EN 0357 series A 7 Spigots DIN 8 series 3 8 Spigots DIN 866 series A A Spigots DIN 866 series B B Spigots SMS Spigots ASME BPE 59 Spigots ISO 7 / EN 0357 series C 60 Threaded connections Threaded sockets DIN ISO 8 Threaded sockets BS Rc length DIN 30-4 series M8 3C Threaded spigots DIN ISO 8 9 Threaded sockets NPT length DIN 30-4 series M8 3D Flanges Flanges EN 09 / PN5 / form B 3 Flanges ANSI CLASS 5/ RF 47 Clamp connections Clamps ASME BPE for pipe ASME BPE, length ASME BPE 80 Clamps DIN 3676 series B for pipe EN ISO 7, length EN 558, series 8 Clamps DIN 3676 series A for pipe DIN 8, length EN 558, series 86 Clamps ASME BPE for pipe ASME BPE, length EN 558, series 88 Valve body material Code (Rg 5) CC499K, Cast bronze (ASTM A 35 CF3M 36L), Investment casting , Investment casting , Investment casting C* Material equivalency 36L * A surface finish from the order code table K number must be specified for valve body material C. Control function Flow Code 0 piston ø mm under the seat 0 piston ø 70 mm under the seat piston ø 0 mm under the seat Flow under the seat Code Normally closed (NC) Double acting (DA) 3* Double acting (normally open) 8* * R-No. on request Regulating cone R-No. For the regulating cone no. (R-No.) - linear or equal-percentage (mod.) please refer to the table K number Code Surface finish only for valve body material C external surface electrolytically gloss polished / mechanically polished internal Ra 0.6 µm 903 external surface electrolytically gloss polished / mechanically polished internal Ra 0.8 µm 904 external surface electrolytically gloss polished / mechanically polished internal Ra 0.4 µm 909 For further order data see page 6 5
6 Order example 5 D RS Type Nominal 5 Body configuration (code) Connection (code) 9 Valve body material (code) 37 Seat seal (code) 5 Control function (code) (code) Regulating cone (R-No.) D RS04 K number (code) 903 For the technical data and order data of the positioners please refer to data sheets GEMÜ 434, 435 and 436. Please also note the table on the last page. dimensions / Installation dimensions - Valve with /-way body [mm] dimensions G ø B M A G A B M M 6x 70 G / M 6x 86 G / M x.5 49 G /4 G Installation dimensions / Weight [kg] Wrench SW 0 H/LA Weight H/LA Weight H/LA Weight SW 45 LA CT 6
7 dimensions / Installation dimensions - Valve with angle body [mm] dimensions ø B M A G M 6x 70 G / M 6x 86 G / M x.5 49 G /4 Wrench SW Installation dimensions / Weight [kg] 0 and 3 and 4 CT Weight CT Weight CT Weight B M G CT A G SW 7
8 /-way body GEMÜ with 434 µpos 5 0 Control function øb LAR / øb 4 45 LAR GEMÜ with 435 epos 5 0 Control function øb LAR AR and and and and LAR øb AR
9 /-way body GEMÜ with 436 cpos 5 0 Control function øb LAR / 0, 3, and , 3, and and and and and and and and øb LAR 90 Angle body GEMÜ with 434 µpos 5 0 Control function
10 Angle body GEMÜ with 435 epos 5 0 Control function AR and and and and AR GEMÜ with 436 cpos 5 0 Control function 0, 3, and , 3, and and and and and and and and
11 Body dimensions [mm] Material code 34 Butt weld spigots, connection code 0, 6, 7, 37, 59, 60 Valve body material:.4435 (code 34),.4408 (code 37) Material code 37 Connection code L LB L LB ø d s ø d s ø d s ø d s ø d s ø d s ø d s For materials see overview on page 9 Butt weld spigots, connection code A, B, 59 Valve body material:.4435 (Code C) Connection code A B 59 L LB ø d s ø d s ø d s d LB L s
12 t R Body dimensions [mm] Threaded sockets DIN, connection code Valve body material: Cast bronze (code 9),.4408 (code 37) L LB R t SW G / hexagonal G 3/ hexagonal G 9. 4 hexagonal G /4.4 octagonal G /.4 55 octagonal 40.0 G octagonal For materials see overview on page 9 Threaded sockets NPT, BS Rc, connection code 3C, 3D Valve body material: Cast bronze (code 9),.4408 (code 37) Connection code L LB SW R t R t hexagonal Rc / 5.0 / NPT hexagonal Rc 3/ /4 NPT hexagonal Rc 9. NPT octagonal Rc /4.4 /4 NPT octagonal Rc /.4 / NPT octagonal Rc 5.7 NPT 7.8 For materials see overview on page 9 3C 3D SW 45 R LB L t Threaded sockets DIN, connection code, 3D / Angle body Valve body material:.4408 (code 37) Connection code Connection code 3D SW LE H R t R t G / 5.0 / NPT G 3/ /4 NPT G 9. NPT G /4.4 /4 NPT G /.4 / NPT G 5.7 NPT 7.8 SW R LE t H
13 Body dimensions [mm] Flanges, connection code 3, 47 Valve body material:.4435 (code 34) FTF LB ø D ø L ø k Number of bolt holes L 45 FTF 45 d d3 k D LB NPS LB Clamp connections, connection code 80, 8, 86, 88 Valve body material:.4435 (code 34) L Connection code ø d ø d3 ø d ø d3 ø d ø d3 LB L ø d ø d3 5 / / / / LB L 3
14 Connection code Material code Overview of metal bodies for GEMÜ Spigots A B C C C X X X X X X X - X X X X 0 X X X X X X X - X X X X 5 X X X X X X X X X X X X 3 - X X X X X X X X 40 X X X X X X X X X X X X X X X X X X X X X X X X Connection code Material code Body configuration Overview of metal bodies for GEMÜ Threaded connections Clamps Flanges 3C 9 3D /-way body Angle body /-way body 5 X X X X X X X X X X X X X X X 0 X X X X X X X X X X X X X X X 5 X X X X X X X X X X X X X X X 3 X X X X - X X X X - X X - X X 40 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X Angle body 4
15 Information - Specifications 5
16 Information - Specifications - GEMÜ standard regulating cones 6
17 Positioner functions / features 434 µpos 435 epos 436 cpos Controller type Positioner X X X Process controller X Control air flow Version 5 l/min l/min l/min Version 90 l/min 00 l/min Operation Local display / keypad X X Status display X X X Web browser user X Field bus (Profibus DP, Device Net) X Signal 4V DC / 3-wire X X X Body Plastic X X Aluminium / industrial X Functions Automatic initialisation X X X Alarm / error outputs X X Min/max positions adjustable X X GEMÜ 434 µpos not available for actuator Positioners and process controllers for linear and quarter turn valves For detailed information on positioners and process controllers please refer to the adjacent brochure. For further globe valves, accessories and other products, please see our Product Range catalogue and Price List. Contact GEMÜ. Other GEMÜ control valves GEMÜ cpos GEMÜ epos GEMÜ µpos GEMÜ cpos GEMÜ µpos All rights including copyright and industrial property rights are expressly reserved. Subject to alteration / Should there be any doubts or misunderstandings, the German version of this data sheet is the authoritative document! VALVES, MEASUREMENT AND CONTROL SYSTEMS GEMÜ Gebr.Müller Apparatebau GmbH & Co.KG Fritz-Müller-Str. 6-8 D Ingelfingen-Criesbach Telefon +49(0)7940/3-0 Telefax +49(0)7940/3-9 info@gemue.de
Angle Seat Globe Control Valve, Metal
Angle Seat Globe Control Valve, Metal Construction The GEMÜ 2/2-way angle seat globe control valve is designed for demanding flow control applications. It can be paired with the GEMÜ 1434 µpos, GEMÜ 1435
More informationAngle Seat Globe Control Valve, Metal
Angle Seat Globe Control Valve, Metal Construction The GEMÜ /-way angle seat globe control valve is designed for demanding flow control applications. It can be paired with the GEMÜ 434 µpos, GEMÜ 435 epos
More informationAngle Seat Globe Control Valve, Metal
Angle Seat Globe Control Valve, Metal Construction The GEMÜ 2/2-way angle seat globe control valve is designed for demanding flow control applications. It can be paired with the GEMÜ 1434 µpos, GEMÜ 1435
More informationGlobe Control Valve, Metal
Globe Control Valve, Metal Construction The GEMÜ /-way globe control valve is designed for demanding flow control applications. It can be paired with the GEMÜ 434 µpos, GEMÜ 435 epos positioners or the
More informationAngle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated /-way valve has a plastic pneumatic piston actuator. The valve spindle is sealed by a self-adjusting gland packing or a compact
More informationAngle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated /-way valve has a robust low maintenance aluminium actuator. The valve spindle is sealed by a self-adjusting gland packing providing
More informationAngle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ manually operated 2/2-way angle seat globe valve has an ergonomically designed plastic handwheel. The valve spindle is sealed by a self-adjusting gland
More informationGlobe Valve, Metal. Sectional drawing
Globe Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way globe valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. The valve plug is fixed to the
More informationGlobe Valve, Metal. Sectional view
Globe Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way globe valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. The valve plug is fixed to the
More information550 Connection code 80 / Valve body material code C2. Angle Seat Globe Valve, Metal
Angle Seat lobe Valve, Metal Construction The EMÜ pneumatically operated / way angle seat globe valve has a low maintenance piston actuator. The valve spindle is sealed by a self-adjusting gland packing
More information555 Connection code 80 / Valve body material code C2. Angle Seat Globe Valve, Metal Aseptic
Angle Seat Globe Valve, Metal Aseptic Construction The GEMÜ 555 pneumatically operated 2/2-way valve has a piston actuator and is designed for pure steam applications. The valve has a PTFE seat for tight
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. Normally Closed, Normally
More informationGEMÜ 549 esydrive Motorized globe valve
esydrive Motorized globe valve Features Linear or modified equal-percentage control characteristics High flow rates Force and speed are variably adjustable Extensive diagnostic facilities Operable via
More informationControl Valve, Plastic/Metal
Control Valve, Plastic/Metal Construction The GEMÜ 2/2-way control valve has a stainless steel piston actuator. ll metallic actuator components are made of stainless steel. It is available with a normally
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance actuator. Normally Closed, Normally Open and Double Acting control functions are available.
More informationR690. Diaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ diaphragm valve has a low maintenance membrane actuator which can be controlled by air or inert gases. Normally Closed (NC), Normally Open (NO) and Double
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ 2/2-way diaphragm valve has a low maintenance piston actuator which can be controlled by inert gases. Normally Closed, Normally Open and Double Acting control
More information600, 630. Diaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The /630 pneumatically operated 2/2-way valves have a low maintenance piston actuator which can be controlled by inert gaseous media. They have an integral optical
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance piston actuator which can be controlled by inert gases. The valve has an integrated optical
More informationDiaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ pneumatically operated 2/2-way valve has a low maintenance piston actuator which can be controlled by inert gaseous media. It has an integral optical position
More information611, 671. Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The 611 and 671 manually operated 2/2-way metal diaphragm valves have a low maintenance plastic bonnet and an integral optical position indicator as standard. Features
More informationDiaphragm Valve, Metal
Distributed by: Tel: 905.677.9000 Toll Free: 1.800.486.7863 www.tricanada.com Diaphragm Valve, Metal Construction The GEMÜ 2/2-way diaphragm valve has a low maintenance piston actuator which can be controlled
More informationControl Valve, Metal. Options Versions according to ATEX for manual and pneumatic operation on request
Control Valve, Metal Construction The GEMÜ 2/2-way control valve has a body with an integrated control mechanism which can be controlled by various operator types. Features Suitable for inert and corrosive*
More informationDiaphragm valve, Plastic
Diaphragm valve, Plastic Construction The GEMÜ manually operated 2/2-way diaphragm valve has a low maintenance plastic bonnet. An optical position indicator is integrated as standard. Features Suitable
More informationDiaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance plastic piston actuator which can be controlled by inert gaseous media. Normally Closed,
More information611, 671. Diaphragm Valve, Metal
Distributed by: Tel: 905.677.9000 Toll Free: 1.0.486.7863 www.tricanada.com Diaphragm Valve, Metal Construction The 611 and 671 manually operated 2/2-way metal diaphragm valves have a low maintenance plastic
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The 601, and manually operated diaphragm valves have a temperature resistant plastic handwheel, 602 has a stainless steel handwheel. Bonnet and internals are made all
More informationN086, N186, N786. Pressure retaining valve, Plastic
Pressure retaining valve, Plastic Construction The GEMÜ N086, N186 and N786 pressure retaining valves are used to provide a constant back pressure in process plant. If the inlet pressure rises above a
More information653, 654. Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ 653 / 654 manually operated 2/2-way metal diaphragm valve has a stainless steel bonnet and is available in two versions - GEMÜ 653 has a handwheel in high temperature
More informationR677. Diaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction All medium wetted parts, the bonnet and handwheel of the GEMÜ 2/2-way diaphragm valve are made of plastic. The low maintenance plastic bonnet has an ergonomically
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ piston actuated 2/2-way diaphragm valve is designed for use in sterile areas of application. All metallic actuator components are made of stainless steel. The
More informationTank Bottom Valve, Metal
Tank Bottom Valve, Metal Construction The 2/2-way metal tank bottom valve GEMÜ is manually operated with a side mounted gear which has an optical position indicator as standard. The stainless steel valve
More informationAngle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated 2/2 way angle seat globe valve has a low maintenance aluminium piston actuator. The valve spindle is sealed by a selfadjusting
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ motorized metal diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a non-self-locking reduction
More informationGEMÜ 539 esydrive Motorized globe valve
esydrive Motorized globe valve Features Linear or modified equal-percentage control characteristics High flow rates Force and speed are variably adjustable Extensive diagnostic facilities Operable via
More informationControl valve BioStar control
Control valve BioStar control Construction The GEMÜ 567 BioStar control 2/2-way control valve is designed for use in sterile applications. Flow rates ranging from 80 l/h to 4,100 l/h are possible depending
More informationDiaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ motorized plastic diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a non-self-locking reduction
More informationDiaphragm Valve, Metal
iaphragm Valve, Metal Construction The GEMÜ manually operated 2/2-way metal diaphragm valve has a non-rising handwheel and an integral optical position indicator as standard. Features Suitable for inert
More information650TL. Diaphragm Valve, Metal. Special version "TL"
Special version "TL" Diaphragm Valve, Metal Construction GEMÜ is a manual tapping valve with automatic closing function which is designed for use in sterile applications. This piston actuated diaphragm
More informationSilverLine S647, S660, S670. Diaphragm Valves, Plastic/Metal
Diaphragm Valves, Plastic/Metal Construction GEMÜ SilverLine is a range of simple yet robust plastic and metal diaphragm valves for the control of liquids and gases. Valve bodies are available in PVC-U,
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ motorized metal diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a reduction gear and cam. The
More information650TL. Diaphragm Valve, Metal. Special version "TL"
Special version "L" Diaphragm Valve, Metal Construction GEMÜ is a manual tapping valve with automatic closing function which is designed for use in sterile applications. his piston actuated diaphragm valve
More information710, 717, 723. Ball Valve, Plastic
Ball Valve, Plastic Aufbau GEMÜ 710, 717 and 72 are 2/2 or /2-way plastic ball valves available in the sizes 1/2 to 2 (DN 8 to DN 50, GEMÜ 717 to DN 100). GEMÜ 710 has a corrosion resistant low maintenance
More informationDiaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ motorized plastic diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a non-self-locking reduction
More informationK715, 711, 728, 751. Ball Valve, Stainless steel
Ball Valve, Stainless steel Construction GEMÜ 711, 728 and 751 are 3-piece 2/2-way stainless steel ball valves with top flange EN ISO 5211 in sizes 1/4 to 4 (DN 8 to DN 100). The top flange enables both
More informationIntelligent Positioner
Intelligent Positioner Construction The GEMÜ 1 µpos is a digital electro-pneumatic positioner for process valve control. Designed for simple, safe and quick use with valves with strokes < mm. The positioner,
More information790, 791, 797, 798. Ball valve, metal
Ball valve, metal Construction GEMÜ 790, 791, 797 and 798 are 3-piece 2/2-way ball valves with top flange EN ISO 5211 in sizes 1/4 to 4 (DN 8-100). This flange enables both pneumatic and electric actuators
More informationDiaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ motorized plastic diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a non-self-locking reduction
More informationSolenoid Valve, Plastic
Solenoid Valve, Plastic Construction The EMÜ directly controlled 2/2-way plastic solenoid valve has a high performance coil which is hermetically separated from the medium by means of a flexible PTFE bush.
More informationButterfly Valve, Metal
Butterfly Valve, Metal Construction The motorized GEMÜ 2/2 way butterfly valve has a low maintenance electrical actuator with a powerful reversible DC motor. The secondary gear in the motor, consisting
More information410, 417, 423. Butterfly valve, Plastic
Butterfly valve, Plastic Construction GEMÜ 410, 417 and 423 are centric butterfly valves in nominal sizes N 15-50. The valve body is made of PVC-U, the butterfly disc is made of PVF or PP. The available
More informationGEMÜ R680 Motorized diaphragm valve
Motorized diaphragm valve Features Standard integral optical position indicator Optional flow direction and installation position Insensitive to particulate media Motorized alternative for applications
More informationIntelligent Positioner
Intelligent Positioner Construction The GEMÜ epos digital electro-pneumatic positioner detects the valve position via its external LongLife travel sensor. It has a solid housing with protected operating
More informationFull Bore Diaphragm Valve, Metal
Full Bore Diaphragm Valve, Metal Construction The GEMÜ motorized 2/2 way full bore diaphragm valve is fitted with a motor/control units made by AUMA. Features Optional rubber lining particularly suitable
More informationCATALOG. 2/2 - Way Angle Seat Valves SMART IN FLOW CONTROL.
CATALOG / - Way Angle Seat Valves SMART IN FLOW CONTROL. Description and Features The SED Angle Seat Valve is composed of a /-way angle seat valve body and a pneumatically operated piston actuator, which
More informationBall Valve, Metal - Sanitary
all Valve, Metal - Sanitary Construction GEMÜ 740, 741 and 748 are 3-piece 2/2-way metal ball valves with top flange EN ISO 5211 in sizes 1/4 to 4 (DN 8 to DN 100). They are particularly suitable for sanitary/hygienic
More informationGEMÜ 205 Electrically operated solenoid valve
Electrically operated solenoid valve Features Hermetic separation between medium and actuator In case of power failure operation possible by manual override Standard integral optical position indicator
More information/ 855 / 857 / 861 / / 870 / 875 / 880 / 885. Variable Area Flowmeter, Plastic
Variable Area Flowmeter, Plastic Construction The flowmeter operates according to the variable area principle. Metering tubes are available in PA transparent or Polysulphone suitable for inert or corrosive*
More informationGEMÜ ADH, ADP, MSC, RC0 Accessories for quarter turn valves
GEMÜ H, P, MSC, RC0 ccessories for quarter turn valves Mounting sleeves Mounting sleeve, square geometry SW actuator SW shaft Mounting sleeve, star-shaped geometry SW actuator SW shaft Length Länge Length
More informationDR/SC. Quarter Turn Actuator, pneumatically operated
Quarter Turn Actuator, pneumatically operated Construction The pneumatic quarter turn actuators operate according to the double piston rack and pinion principle. Double acting or single acting versions
More informationGEMÜ 649 esydrive Motorized diaphragm valve
esydrive Motorized diaphragm valve Features Hermetic separation between medium and actuator Installation for an optimised draining is possible Open/close function, positioner and process controller Variable
More informationDiaphragm Valve, Plastic 2/2 way, motorized
Diaphragm Valve, Plastic / way, motorized Construction Maintenancefree electric actuator Maintenancefree toothed belt drive Reversible synchronous motor Manual override Optical position indicator Features
More information2/2-Way and T Valve Bodies in Stainless Steel
2/2-Way and T Valve Bodies in Stainless Steel Leading the world in pharmaceutical and biotechnology industry sterilisation processes GEMÜ is one of the leading manufacturers of valves, measurement and
More informationButterfly valve, Metal
Butterfly valve, Metal Construction The GEMÜ VICTORIA is a wafer pattern butterfly valve with an elastomer liner. It is available in nominal sizes DN 50-600 and in various body versions such as Wafer,
More information0322, 0324, Pilot Solenoid Valve, Plastic
Pilot Solenoid Valve, Plastic Construction The directly controlled GEMÜ 3/2-way pilot solenoid valve consists of an epoxy encapsulated detachable coil and a plastic body. The electrical connection is made
More informationDiaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The pneumatically operated 2/2 way diaphragm valve GEMÜ is a corrosionresistant all plastic construction. It has a maintenancefree piston actuator which can be controlled
More information2/2-way Angle Seat Valve, manually operated, for media up to +180 C
2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel valve body Compact industrial design with long service life /2702 can be combined
More information2/2 way Globe Control Valve, threaded connection, 3/8" 3"
2/2 way Globe Control Valve, threaded connection, 3/8" 3" Complete Burkert system using Type 2712 with TopControl 8630 New generation with interchangeable trims, 3 to 5 Cvs value per connection port Excellent
More informationButterfly valves Plastic and Metal
Butterfly valves Plastic and Metal VALVES, MEASUREMENT AND CONTROL SYSTEMS Innovative technology GEMÜ is a leading world-wide manufacturer of high quality valves, measurement and control systems. Fritz
More information2/2-way Angle Seat Valve, manually operated, for media up to +180 C
2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel 316L valve body Compact industrial design with long service life /2702 can
More informationFlowmeter, Plastic 805 / 807 / 815 / / 825 / 832 / 835. Sectional drawing
Flowmeter, Plastic Construction The flowmeter operates according to the variable area principle. Metering tubes are available in TrogamidT, suitable for inert media, and polysulfone, suitable for corrosive*
More informationFlowmeter, Plastic 855 / 857 / 865 / / 875 / 880 / 885
Flowmeter, Plastic Construction The flowmeter operates according to the variable area principle. Metering tubes are available in TrogamidT, suitable for inert media, and, suitable for corrosive* media
More information2/2-way Globe Control Valve, threaded port connection, DN 10-65
2/2-way Globe Control Valve, threaded port connection, DN 10-65 Type 2712 can be combined with... Classic design with interchangeable trims, 3 to 5 Kvs-value per connection port Excellent control characteristic
More informationSolenoid valve, Metal
Solenoid valve, etal Construction The 4/2 way compact indirectly controlled valve with aluminium body, piston slide valve and detachable coil encapsulated in plastic has got a T-ring piston slide valve
More informationType Pressure Transmitter with display. Pressure Transmitter. Technical data. DN15-50 Body material. Stainless steel 316L Actuator material
2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel 316L valve body Compact industrial design with long service life Excellent
More information2/2 way Globe Control Valve, flange connection, 1/2" 4"
2/2 way Globe Control Valve, flange connection, 1/2" 4" Complete Burkert system using Type 2712 with TopControl 8630 New generation with interchangeable trims, 3 to 5 Cvs value per connection port Excellent
More informationIntelligent Positioner
Intelligent Positioner Construction The digital electro-pneumatic positioner detects the valve position with an external long life travel sensor. It possesses a solid housing with protected operating keys.
More informationValves, Measurement and Control Systems
Valves, Measurement and Control Systems VALVES, MEASUREMENT AND CONTROL SYSTEMS Innovative technology GEMÜ is a leading worldwide Industrial and Process Valve manufacturer, supplying customers in the Pharmaceutical,
More informationAngle Seat Valve /2" up to 3"
1/ up to up to 428 F Pneumatically operated angle seat valve for the control of neutral and aggressive gases, liquids and steam. Compact design For temperatures from -22 F up to +428 F Working pressure
More informationGEMÜ 710 Pneumatically operated ball valve
Pneumatically operated ball valve Features High flow rates Choice of various body materials and connection types Available as shut off or control valve / and /way versions available Description The / and/or
More informationPF6 Stainless Steel Piston Actuated On/Off Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationButterfly valves Plastic and Metal
Butterfly valves Plastic and Metal Product overview and technical data VALVES, MEASUREMENT AND CONTROL SYSTEMS Innovative technology GEMÜ is a leading world-wide manufacturer of high quality valves, measurement
More informationT EN Type 3347/3379 Pneumatic Control Valve Type 3347 Hygienic Angle Valve
T 8097-3 EN Type 3347/3379 Pneumatic Control Valve Type 3347 Hygienic Angle Valve Application Control valve for hygienic applications in the food and pharmaceutical industries Valve size DN 6 to NPS ¼
More informationT EN Type 3349 Aseptic Angle Valve With USP-VI diaphragm
T 8048-2 EN Type 3349 Aseptic Angle Valve With USP-VI diaphragm Application Control valve for aseptic applications in the food and pharmaceutical industries according to DIN or ANSI standards with USP-VI
More information2/2-way Globe Control Valve with stainless steel design for media up to +185ºC, DN
2/2-way Globe Control Valve with stainless steel design for media up to +185ºC, DN 10-100 Type 2301 flange can be combined with Excellent control characteristics High cycle life Flow optimised body in
More informationButterfly Valve Metal
Butterfly Valve Metal Construction The GEMÜ 490 butterfly valve is lined with TFM (PTFE)/PFA to suit aggressive chemical applications. It is based on the design of concentric soft seal valves. The construction
More informationGEMÜ sterile sampling systems
GEMÜ sterile sampling systems safe, reliable, durable www.gemu-group.com Sterile sampling systems On the safe side with GEMÜ Hygienic design GEMÜ valve bodies made out of 1.4435 stainless steel, electropolished,
More informationSeries 240 Type 3349/3379 Pneumatic Control Valve Type 3349 Aseptic Angle Valve
Series 240 Type 3349/3379 Pneumatic Control Valve Type 3349 Aseptic Angle Valve With USP-VI diaphragm Application Control valve for aseptic applications in the food and pharmaceutical industries DIN or
More information+ = Angle-seat Valve System for continuous control. Type 8802/2300 electro-pneumatically operated angle-seat valve
Angle-seat Valve System for continuous control Type 8802/2300 electro-pneumatically operated angle-seat valve + = TWO YEAR WARRANTY on this valve system Burkert 8802 continuous control valve + = 2300 series
More informationAngle Seat Valve 7010
Angle Seat Valve 7 DN 8 up to DN 8 PN 16 - PN Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. Compact design Unaffected by lightly contaminated
More information2/2-way Angle-Seat Control Valve with stainless steel design for media up to +185ºC, DN15-65
2/2-way Angle-Seat Control Valve with stainless steel design for media up to +185ºC, DN15-65 Excellent combination of good control characteristic and high fl ow rates High cycle life Clean design for optimal
More informationGuth modulating valves. The sophisticated solution
Guth modulating valves The sophisticated solution VSR-modulating valves with diaphragm actuator Modulating valves are used in process technology to control process parameters such as temperature, pressure
More informationSeries 240 Type and Type Pneumatic Control Valves Type 3347 Hygienic Angle Valve
Series 240 Type 3347-1 and Type 3347-7 Pneumatic Control Valves Type 3347 Hygienic Angle Valve Application Control valve for hygienic applications in the food and pharmaceutical industries Valve size DN
More informationPF6 Stainless Steel Piston Actuated On/ Off Valves
Page of TI-P7- CH Issue Cert. No. LRQ 9 ISO 9 PF Stainless Steel Piston Actuated On/ Off Valves Description A -port pneumatically actuated on / off stainless steel valve for use on steam, water, air, oil
More information2/2-Way and T Valve Bodies in Stainless Steel
2/2-Way and T Valve Bodies in Stainless Steel Leading the world in pharmaceutical and biotechnology industry sterilisation processes GEMÜ is one of the leading manufacturers of valves, measurement and
More informationValves, Measurement and Control Systems
Valves, Measurement and Control Systems VALVES, MEASUREMENT AND CONTROL SYSTEMS Innovative technology GEMÜ is a leading world-wide manufacturer of high quality valves, measurement and control systems.
More informationFlow-rate curves for diaphragm valves Type 2730 plastic, 2731 forged, 2731 cast, 2731 GP cold formed pipe valve body
Flow-rate curves for diaphragm valves Page 1/12 In this documentation fl ow characteristics for the Bürkert diaphragm valves 273 and 2731 are given. These characteristics were determined with a pressure
More informationDiaphragm Valve MV pneumatic - with pneumatically directly controlled actuator
Diaphragm Valve MV 0 - pneumatic - with pneumatically directly controlled actuator Advantage good control characteristics DN 5 - DN 50 equipped as standard with visual position indicator and manual emergency
More informationAngle Seat Valve 7010
Angle Seat Valve 7 DN 8 up to DN 8 PN 16 - PN 4 Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. Compact design Unaffected by lightly
More information2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, DN 10-50
2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, 10-50 (2652) (2655) 2 or ball valve Pneumatic actuator Compact design Visual position indicator Types 2652/2655 can be
More information