Ball Valves. Red Steel Long Handle. Green Steel Long Handle. Blue Steel Long Handle. Section 7 Valves. Female x Female, BSPP. Female x Female, BSPP

Transcription

1 Ball Full Bore Long Thread Flat Handle Seal Material PTFE -15 C to +120 C 25 bar Red Long Handle Blue Long Handle Green Long Handle 837 Female x Female, BSPP / / / / / / / Female x Female, BSPP / / / / / / / Female x Female, BSPP / / / / / / / Section 7 s Male x Female, BSPP Male x Female, BSPP Male x Female, BSPP / / / / / / / / / / / / / / / /

2 Ball Red T Handle -10 C to +60 C 25 bar Full Bore Long Thread Seal Material PTFE 1763 Section 7 Female x Female, BSPP / / / / Male x Female, BSPP / / / / s Mini Ball, Brass -15 C to +100 C 120 psi (8 bar) Polished Chrome Finish Seal Material PTFE 834 Type MBV, Female x Female, Black Lever Handle, BSPP Type MBV, Female x Female, Red Lever Handle, BSPP MBV18S 1/ MBV14S 1/ MBV38S 3/ MBV12S 1/ MBV34S 3/ Polished Chrome Finish Seal Material PTFE Type MBVM, Male x Female, Black Lever Handle, BSPP MBV18 1/ MBV14 1/ MBV38 3/ MBV12 1/ MBV34 3/ Type MBVM, Male x Female, Red Lever Handle, BSPP MBVM18S 1/ MBVM14S 1/ MBVM38S 3/ MBVM12S 1/ MBVM34S 3/ MBVM18 1/ MBVM14 1/ MBVM38 3/ MBVM12 1/ MBVM34 3/

3 Ball Degreased Ball, Brass Full Flow Ball, Brass High quality 2 piece full bore ball valve with full thread, degreased for oxygen. supplied individually bagged and heat sealed. Body: Nickel Plated Brass/Handle Aluminium Ball: Chromed Brass Seals: PTFE Stem Seal: NBR -15 C to +150 C Section 7-20 C to +80 C 2119 Female x Female, BSPT Type BV90, Female x Female, Lever Handle, BSPP /4 3/8 1/2 3/ /4 1.1/ /2 3 4 Suitable for domestic water services, heating, air-conditioning, & compressed air systems Working Temperature: -15 C to +120 C /4 3/8 1/2 3/ /4 1.1/2 2 ISO 5211 Pad, WRAS Approved Full Bore ISO 5211 Direct Mount Light Model Brass Ball Valve, Red Handle Lightweight, low pressure brass ball valve. BV90-14 BV90-38 BV90-12 BV90-34 BV90-1 BV BV BV90-2 s Working Temperature: -20 C to +95 C Maximum 40 bar Maximum 25 bar Available upto 4 on Request Female x Female, BSPP 0109 LMBV-12 LMBV-34 LMBV-1 LMBV-114 LMBV-112 LMBV-2 Female x Female, BSPP 1/2 3/ /4 1.1/ LV LV LV LV LV LV LV /2 3/ /4 1.1/ / indd /02/ :05

4 Ball Lever Handles, Brass Full bore Nickel plated BS EN331 Screwed BSPP Female x Female Page 794 Full bore Nickel plated BS EN331 Screwed BSPP Female x Female Section 7 Temperature Ranges: Gas: -5 C to +60 C Water/Oil: -5 C to +150 C Gas: 5 bar Water/Oil: 20 bar Temperature Ranges: Gas: -5 C to +60 C Water/Oil: -5 C to +150 C Gas: 5 bar Water/Oil: 20 bar s Pro-Fit - Red, Female x Female, BSPP 0230 EPS / EPS / EPS / EPS / EPS EPS / EPS / EPS EPS / EPS EPS Full bore Nickel plated BS EN331 Screwed BSPP Female x Female Temperature Ranges: Gas: -5 C to +60 C Water/Oil: -5 C to +150 C Gas: 5 bar Water/Oil: 20 bar Pro-Fit - Yellow, Female x Female, BSPP 0230 EPS / EPS / EPS / EPS / EPS EPS / EPS / EPS EPS / EPS EPS Taper threaded Full bore Nickel plated BS EN331 Screwed BSPT Female x Female Temperature Ranges: Gas: -5 C to +60 C Water/Oil: -5 C to +150 C Gas: 5 bar Water/Oil: 20 bar Pro-Fit - Blue, Female x Female, BSPP 0230 EPS / EPS / EPS / EPS / EPS EPS / EPS / EPS EPS / EPS Pro-Fit - Yellow, Female x Female, BSPT 0230 EPS / EPS / EPS EPS / EPS

5 Ball Butterfly Handles, Brass Full bore Nickel plated BS EN331 Pro-Fit - Red, Female x Female, BSPP 0230 Temperature Ranges: Gas: -5 C to +60 C Water/Oil: -5 C to +150 C Gas: 5 bar Water/Oil: 20 bar Screwed BSPP Female x Female EPS / EPS / EPS / EPS / EPS Page 794 Full bore Nickel plated BS EN331 Pro-Fit - Blue, Female x Female, BSPP 0230 Temperature Ranges: Gas: -5 C to +60 C Water/Oil: -5 C to +150 C Gas: 5 bar Water/Oil: 20 bar Screwed BSPP Female x Female EPS / EPS / EPS / EPS / EPS Section 7 Full bore Nickel plated BS EN331 Temperature Ranges: Gas: -5 C to +60 C Water/Oil: -5 C to +150 C Pro-Fit - Red, Male x Female, BSPP 0230 Screwed BSPP Male x Female EPS / EPS Standard Lever Ball PN25, Red Handle, BSPP 0109 Gas: 5 bar Water/Oil: 20 bar Water/Oil: -5 C to +150 C Water/Oil: 20 bar BVNA-14 1/ BVNA-38 3/ BVNA-12 1/ BVNA-34 3/ Full bore Nickel plated BS EN331 Temperature Ranges: Gas: -5 C to +60 C Water/Oil: -5 C to +150 C Pro-Fit - Yellow, Female x Female, BSPP 0230 Screwed BSPP Female x Female EPS / EPS / EPS / EPS / EPS Gas: 5 bar Water/Oil: 20 bar BVNA BVNA / BVNA / BVNA s 689

6 Ball Page 717 Compression Ball, Brass, Lever Handles Section 7 Full bore Nickel plated BS EN331 Compression ended Temperature Ranges: Gas: -5 C to +60 C Water/Oil: -5 C to +150 C Gas: 5 bar Water/Oil: 20 bar Full bore Nickel plated BS EN331 Compression ended Temperature Ranges: Gas: -5 C to +60 C Water/Oil: -5 C to +150 C Gas: 5 bar Water/Oil: 20 bar Full bore Nickel plated BS EN331 Compression ended Temperature Ranges: Gas: -5 C to +60 C Water/Oil: -5 C to +150 C Gas: 5 bar Water/Oil: 20 bar s Pro-Comp - Red Lever 0230 EPS EPS EPS EPS EPS EPS Full bore Nickel plated BS EN331 Compression ended Pro-Comp - Yellow Lever 0230 EPS EPS EPS EPS EPS EPS Compression Ball, Brass, Butterfly Handles Temperature Ranges: Gas: -5 C to +60 C Water/Oil: -5 C to +150 C Gas: 5 bar Water/Oil: 20 bar Full bore Nickel plated BS EN331 Compression ended Temperature Ranges: Gas: -5 C to +60 C Water/Oil: -5 C to +150 C Gas: 5 bar Water/Oil: 20 bar Pro-Comp - Blue Lever 0230 EPS EPS EPS EPS EPS EPS Full bore Nickel plated BS EN331 Compression ended Temperature Ranges: Gas: -5 C to +60 C Water/Oil: -5 C to +150 C Gas: 5 bar Water/Oil: 20 bar Pro-Comp - Red Butterfly Pro-Comp - Yellow Butterfly Pro-Comp - Blue Butterfly EPS EPS EPS EPS EPS EPS EPS EPS EPS

7 Ball Lockable, Gas Full Bore Temperature Ranges: Fluids: -20 C to +150 C Gas: -20 C to +60 C 25 bar (at 25 C) Complete with 2 Keys H Section 7 BSPP / L Type BV76, Female x Female, Locking, BSPP L BV / BV / BV s Customers who bought from this page also purchased Brass Hose Tails see page

8 Ball Seal Material PTFE Temperature: -20 C to +80 C Maximum Pressure: 20 bar Gas Mini Ball, Brass Section 7 s 1602 Type 6300, Female x Female, BSPP /8 1/ /4 1/ /8 3/ /2 1/ Type 6310, BSPT Male x BSPP Female /8 1/ /4 1/ /4 1/ /8 3/ /2 1/ /4 3/ Type 6320, Male x Female, BSPP /8 1/ /4 1/ /4 1/ /8 3/ /2 1/ Type 6330, Male x Male, BSPP /8 1/ /8 1/ /4 1/ /2 1/ Type 6340, Tube x Female, BSPP / / / / / Type 6350, Male, BSPT x Tube / / / / / / / Type 6420, Male x Male, BSPP /8 1/ /8 1/ /4 1/ /8 1/ /8 3/ /2 1/ Type 6440, Male BSPP x Tube / / / / / / / / / / / / / / / / / / / / / / Type 6500, Tube x Tube

9 Ball Mini Ball Valve Handles 1606 Mini Ball, Brass Type 6910, Long Handle 6910-A B L Type 6560, Push-in x Push-in Type 6710, T Port, BSPP /8 1/ /4 1/ /8 3/ Section 7 For Brass Push-in Fittings see pages Type 6570, Push-in x BSPT / / / / / / / / / / Type 6720, Angle Port, BSPP /8 1/ /4 1/ /8 3/ Colour Coded Handle Inserts - Type 6920 s Type 6700, L Port, BSPP /8 1/ /4 1/ /8 3/ For 1/8, 1/4, 3/ A-B Blue A-G Green A-R Red A-W White A-Y Yellow 0.30 For 1/2, 3/ B-B Blue B-G Green B-R Red B-W White B-Y Yellow

10 Section 7 s Compact Non-return, Brass Seal Material NBR -18 C to +70 C Type 6062, Metric & BSPP Maximum 115 PSI Cracking Pressure: 0.5 PSI M5 M / / / / C to +70 C 1607 Push-in Non-return 1608 Pressure Rating: 15 bar Push-in Non-return 1020 Temperature Range: -18 C to +70 C Quick Exhaust, Brass 552 Type 6050, Metric & BSPP -18 C to +70 C 6050-M5 M / / / / / Type 6063, Male x Female, BSPP Maximum 115 PSI Cracking Pressure: 0.5 PSI / / / / Customers who bought from this page also purchased KELM Nylon Tubing see page

11 Compact Non-return -20 C to +150 C Brass, Viton Seals, BSPP VFU8.V 1/ VFU4.V 1/ VFU3.V 3/ VFU2.V 1/ C to +85 C Brass, EPDM Seals VFU8.E 1/ VFU4.E 1/ VFU3.E 3/ VFU2.E 1/ Ported Non-return Brass, NBR Seals, BSPP VUP8.M 1/ VUP4.M 1/ C to +150 C Brass, Viton Seals, BSPP VUP8.VM 1/ VUP4.VM 1/ C to +85 C Brass, EPDM Seals, BSPP Maximum Working Pressure: 145 PSI Maximum Working Pressure:145 PSI -10 C to +85 C Maximum Working Pressure:145 PSI Maximum Working Pressure:145 PSI Maximum Working Pressure: 145 PSI Cracking Pressure: 0.5 PSI Cracking Pressure: 0.5 PSI Cracking Pressure: 0.5 PSI Cracking Pressure: 0.5 PSI Cracking Pressure: 0.5 PSI VUP8.EM 1/ VUP4.EM 1/ Y Strainer, Brass Mesh Size =1.5mm up to 2 valve Temperature Range: 0 C to +100 C Y Strainer, Brass, BSPP YS-38 3/ YS-12 1/ YS-34 3/ YS YS / YS / YS YS / YS YS Strainers for YS Series 2032 AISI STRAINER YS STRAINER YS STRAINER YS STRAINER YS STRAINER YS STRAINER YS STRAINER YS STRAINER YS STRAINER YS STRAINER YS Globe - Gunmetal/Brass BS 5154 PN 20 Series B. Test Pressures (): Shell 30 bar. Seat 22 bar Type 6062, BSPP GBV-12 1/ GBV-34 3/ GBV GBV / GBV / GBV Shut-off, Brass +30 C to +80 C bar Tube x Tube EVST EVST EVST Check, Brass Minimum opening pressure 0.5psi 0 C to +100 C Type CV100, Opens at 20 W.G., BSPP CV / CV / CV / CV CV / CV / CV CV / CV CV Type CV130, Swing Check Valve, BSPP C to +100 C CV / CV / CV / CV CV / CV / CV CV / CV CV Section 7 s 695

12 Section 7 s Gate - Heavy Duty -20 C to +100 C Working Pressure: 290 psi Type GV157, Brass, BSPP GV / GV / GV / GV GV / GV / GV GV / GV Type GV160, Gunmetal/Brass, BSPP C to +100 C Working Pressure: 240 psi GV / GV / GV / GV GV / GV / GV / GV GV Bronze Oblique Seating Stop SV73 is manufactured in accordance with BS5154/B - PN20. PTFE Disc. Cold Service: 20 bar at -10 to 100 C. Saturated Steam: 9 bar at 180 C Type SV73, Female x Female, BSPP SV / SV / SV SV Needle, Brass 0 C to +100 C Female x Female, BSPP EV-18 1/ EV-14 1/ EV-38 3/ EV-12 1/ bar Male x Male, BSPT EVMM-18 1/ EVMM-14 1/ EVMM-38 3/ EVMM-12 1/ NPT Full Way Ball Valve, Brass, Unplated 1 Type BV50, Female x Female, Lever Handle, NPT BV50-12NPT 1/ BV50-34NPT 3/ Full Flow Locking Ball Complete with 2 Keys Type BV77, Female x Female, BSPP BV / BV / BV High Pressure 2 Way, Brass Type BV210, Female x Female, BSPP BV / BV / BV / BV

13 Mini Ball, Brass -20 C to +150 C psi Type MVS, Female x Female, Screwdriver Slot, BSPP MVS-14 1/ MVS-38 3/ MVS-12 1/ Right Angled Full Flow Ball Type BV07, Female x Female, BSPP BV / BV / BV Full Way Ball with Strainer Panel Mounted Full Bore Ball -10 C to +120 C PN 40, Female x Female, BSPP, Lever Handle / Section 7 Type MVS, Male x Female, Screwdriver Slot, BSPP MVSM-18 1/ MVSM-14 1/ MVSM-38 3/ MVSM-12 1/ Full Flow, Extended Handle Type BV620, Female x Female, BSPP BV / BV / Way Diverter, Ball PN 40, Female x Female, BSPP, Butterfly Handle / Slide - On/Off Type, Brass -18 C to +70 C s Type BV581, Female x Female, BSPP BV / BV / BV / BV Type BV23, Female x Female x Female, BSPP BV / BV / BV Type 6060, BSPP / / / /

14 Section 7 s Venting, Ball Temperature Ranges: Fluids: -10 C to +140 C Gas: -10 C to +60 C Female x Female, BSPP VBV-14 1/ VBV-38 3/ VBV-12 1/ VBV-34 3/ VBV Bronze Self-Closing Lever Globe Valve PTFE Disk Spring 180 C at 10 bar BSPP 0093 Pressure Rating: 16 bar SC/LV/G / SC/LV/G / SC/LV/G Bronze Sight Glass/ Indicator Specification: Hardened single glass inspection window. Maximum Temperature: 150 C 821 BSPP Maximum 16 bar / / /2 Brass Lever/Spring Poppet BSPP PBBLH-3/8 3/ For UPVC see page 800 PVC Non-return bar Female/Female, Threaded BSPP / / / / PVC Ball with Double Union Body: PE Seal: EPDM Female/Female, Threaded BSPP / / / / Air Pinch Control Pressure: 20 to 40 psi greater than material pressure Here s how it works Air or liquid pressure at the control inlet collapses the internal rubber sleeve to provide immediate & positive shut-off. The rubber sleeve closes completely, even on large particulate matter, abrasive and corrosive materials. When open the sleeve allows full, unobstructed flow with little turbulence. N.B: Air pinch valve sleeves can be easily and economically replaced when they wear out. Other body & sleeve material options are available on request. Maximum Actuation Pressure: 90 psi With Polypropylene Body & Buna Sleeve, BSPP PINCH-AP6372 1/ PINCH-AP6304 3/ PINCH-AP6252 5/

15 Plastic Ball Plastic Push-in Body: Polypropylene with NBR Seal Operating Pressure: 3.5 bar Suitable for the use in the Food Industry. 30 C to 85 C Maximum Pressure: 11 bar Hose Tail x Hose Tail Tube x Tube BSPP Female / / / Section 7 Male BSPP x Male BSPP / /2 x 3/ / s Hose Tail x Female BSPP / / / / Hose Tail x Male BSPP / / / / / / BSPT Male x Tube / / / In-line Mini Filter 0270 Customers who bought from this page also purchased Worm Drive Hose see page

16 Auxiliary Ball -10 C to +60 C Maximum 0-10 bar Vaccum - 750mm 1.1Hg Section Straight Union Check Valve, Tube x Tube Union Ball Valve, Tube x Tube Elbow Union Ball, Tube x Tube s Conical Check Out Valve, Tube x BSPT / / / / / / / / Straight Ball, Tube x BSPP / / / / / / / / / / Elbow Union Ball, Tube x BSPP / / / / / / / / / / Conical Check In Valve, Tube x BSPT / / / / / / / / For see pages

17 Bronze Ball Globe Gate Full bore. -10 C to +140 C Maximum 40 bar rated BS 5154 approved BSP Taper F/F ends. Renewable PTFE seat. -10 C to +198 C Maximum 32 bar rated BS 5154 approved BSP Taper F/F ends. Handwheel operation. -10 C to +180 C Maximum 20 bar rated Piece, Lever Handle, BSPT 1818 PN32 Hand Wheel, BSPT 1819 PN20 Hand Wheel, BSPT Section BVBZ / BVBZ / BVBZ BVBZ / BVBZ / BVBZ Y Type Strainers BSP Taper F/F ends. -10 C to +180 C GVBZ / GVBZ / GVBZ GVBZ / GVBZ / GVBZ Swing Check BSP Taper F/F ends. -10 C to +180 C GVBZ375HW-12 1/ GVBZ375HW-34 3/ GVBZ375HW GVBZ375HW / GVBZ375HW / GVBZ375HW BS 5154 approved BSP Taper F/F lockshield. -10 C to +180 C s 1821 Maximum 20 bar rated 1822 Maximum 20 bar rated 1820 Maximum 20 bar rated PN20 Y Strainer, BSPT 0205 YSBZ / YSBZ / YSBZ YSBZ / YSBZ / YSBZ PN20 Swing Check Valve, BSPT 0205 CVBZ / CVBZ / CVBZ CVBZ / CVBZ / CVBZ PN20 Lock Shield, BSPT 0205 GVBZ375LS-12 1/ GVBZ375LS-34 3/ GVBZ375LS GVBZ375LS / GVBZ375LS / GVBZ375LS BS5154B Approved. P.E.D. (Pressure Directive Compliance) Suitable for Heating & Ventilation Applications. 701

18 indd /02/ :06

19 316 Ball Body: 316 Seal: PTFE -20 C to +200 C Body: 316 Seal: PTFE -20 C to +200 C Body: 316 Seal: PTFE -20 C to +200 C 1/4 to 1.1/ psi 1.1/2 to psi 1 Piece, Reduced Bore, Female, BSPP 0099 BV1-14 1/ BV1-38 3/ BV1-12 1/ BV1-34 3/ BV BV / BV / BV Body: 316 Seal: PTFE -20 C to +200 C psi /4 to 1.1/ psi 1.1/2 to psi 2 Piece, Full Bore, Female, BSPP PBV2-14 1/ PBV2-38 3/ PBV2-12 1/ PBV2-34 3/ PBV PBV / PBV / PBV Body: 316 Seal: PTFE Contact our Technical Dept. for Seal Kits. -20 C to +200 C 1000 psi Way, T Port, Reduced Bore, Female, BSPP, 360 Lockable Handle psi BV73-14T 1/ BV73-38T 3/ BV73-12T 1/ BV73-34T 3/ BV73-1T Body: 316 Seal: PTFE -20 C to +200 C 1000 psi 1969 Section 7 s 2 Piece, Full Bore, Female, BSPP 0099 BV2-14 1/ BV2-38 3/ BV2-12 1/ BV2-34 3/ BV BV / BV / BV BV / Piece, Full Bore, Female, BSPP, Lockable Handle 0099 BV3-14 1/ BV3-38 3/ BV3-12 1/ BV3-34 3/ BV BV / BV / BV BV Way, L Port, Reduced Bore, Female, BSPP, 360 Lockable Handle 0099 BV73-14L 1/ BV73-12L 1/ BV73-34L 3/ BV73-1L

20 ISO Pad Body: 316 Seal: PTFE -20 C to +200 C 1000 psi 316 Ball Section Piece, ISO Mounting Pad, Female, BSPP 3 Piece, ISO Top Mounting, Butt Weld, Female 0099 BV2-ISO-14 BV2-ISO-38 BV2-ISO-12 BV2-ISO-34 BV2-ISO-1 BV2-ISO-112 BV2-ISO-114 BV2-ISO /4 3/8 1/2 3/ /4 1.1/ s 3BW-14 3BW-38 3BW-12 3BW-34 3BW-1 3BW-114 3BW-112 3BW-2 3BW-212 3BW-3 3BW-4 1/4 3/8 1/2 3/ /4 1.1/ / Piece, ISO Mounting Pad, Female, BSPP 3 Piece, ISO Top Mounting, Socket Weld, Female 0099 IB3-14 IB3-38 IB3-12 IB3-34 IB3-1 IB3-114 IB3-112 IB3-2 IB3-212 IB3-3 IB /4 3/8 1/2 3/ /4 1.1/ / SW-14 3SW-38 3SW-12 3SW-34 3SW-1 3SW-114 3SW-112 3SW-2 3SW-212 3SW-3 3SW-4 1/4 3/8 1/2 3/ /4 1.1/ / indd /02/ :09

21 316 Gate Working Temperature: +200 C 553 BSPP psi / / / / Globe Body: 316 St. Seal: PTFE -20 C to +200 C 805 BSPP 0099 Working Pressure: 200 psi SGV-14 1/ SGV-38 3/ SGV-12 1/ SGV-34 3/ SGV SGV / Mini Ball Working Temperature: -40 C to +230 C Working Pressure: 600 psi Hexagon Profile Female x Female, BSPP 0099 Viton Seals HEXSMBV14 1/ HEXSMBV38 3/ HEXSMBV12 1/ Hexagon Profile Male x Female, BSPP 0099 HEXSMBV14M 1/ HEXSMBV38M 3/ HEXSMBV12M 1/ Mini Seal: PTFE Working Pressure: 20 bar Female x Female, BSPP 980-1/4 1/ /8 3/ /2 1/ Male BSPP x Female BSPT -20 C to +200 C 981-1/4 1/ /8 3/ /2 1/ Piece Flanged Ball ISO 5211 Top Flange Mounting 316 Firesafe & Anti-Static Design Sizes upto 12 (DN125-DN300) are available on request PN C to +200 C -20 C to +200 C Temperature Range: -30 C to +200 C Working Pressure: 16 bar PN16BV Sizes upto 12 (DN125-DN300) are available on request. PN Working Pressure: 40 bar PN40BV / ISO 5211 Top Flange Mounting 316 Firesafe & Anti-Static Design Working Pressure: 16 bar ANSI ANBV ANBV Piece Ball Working Pressure: 1000 psi NPTF 0099 Temperature Range: -30 C to +200 C Sizes upto 12 (DN125-DN300) are available on request BV2NP-14 1/ BV2NP-38 3/ BV2NP-12 1/ BV2NP-34 3/ BV2NP Section 7 s 705

22 316 Needle 6,000 psi Rated 10,000 psi Rated Imperial Needle Imperial Needle Seal: PTFE The IB series of needle valves are specially designed & manufactured for use in corrosive & hazardous environments. These valves are for use in process control, instrumentation & flow control applications. Feature Benefits: One piece body construction for strength & safety. Non rotating Vee tip design, which forms a bearing joint with the stem eliminating any rotation Working Temperature: +200 C Section psi (414 bar) Max Working Temperature: -29 C to +121 C 6,000 psi (400 bar) 2156 Female x Female, NPTF BSPP NPTF PNV-IB-S-2-FF PNV-IB-S-4-FF PNV-IB-S-6-FF PNV-IB-S-8-FF PNV-IB-S-12-FF PNV-IB-S-16-FF 1/8 1/4 3/8 1/2 3/4 1 cavity. A Hydrostatic test is performed with pure water or other liquids of similar or lower viscosity at 1.5 times & seat leakage test at 1.1 times of the maximum working pressure. Each valve is also tested with Nitrogen Gas at 1000psi for seat, seal & shell leakage. Other tests like vibration, temperature, Helium are available upon request. Material: Body, Stem, Packing Washer, Lock Nut & Gland Retainer A /A-105 Gland Packing: Glass Filled PTFE Packing: PTFE Handle: Dust Cap: Plastic Vee Tip: A ,000 psi (700 bar) /4 3/8 1/ ,000 psi Rated Mini Needle Valve Working Temperature: -50 C to +121 C 1/4 3/8 1/2 The HP series of needle valves are specially designed & manufactured for use in corrosive & hazardous environments. These valves are for use in process control, instrumentation & flow control applications. Feature Benefits: One piece body construction for strength & safety. Non rotating Vee tip design, which forms a bearing joint with the stem eliminating any rotation between the plug & seat on closure ensuring long life. Testing: Each valve is hydrostatically tested in accordance with MSS-SP-99. This procedure includes testing of the body Max Working Temperature: -50 C to +93 C s between the plug & seat on closure ensuring long life. Testing: All valves are 100% factory tested & complete traceability is available upon request. Material: Body, Panel Nut, Washer & Gland Nut A Stem: A / 17-4PH Packing: PTFE Grub Screw: Plated Handle: Vee Tip: A Maximum 205 bar Female x Female, NPTF 0292 Male x Female, NPTF 0292 PNV-IB-S-2-MF PNV-IB-S-4-MF PNV-IB-S-6-MF PNV-IB-S-8-MF PNV-IB-S-12-MF PNV-IB-S-16-MF 1/8 1/4 3/8 1/2 3/ PNV-HP-S-2-FF PNV-HP-S-4-FF PNV-HP-S-6-FF PNV-HP-S-8-FF PNV-HP-S-12-FF PNV-HP-S-16-FF 1/8 1/4 3/8 1/2 3/ /8 1/4 3/8 1/2 3/ Viton Seals OD Compression NPT 0292 PMV-H-S-4-FF-V PMV-H-S-4-MF-V Male x Female, NPTF 1/4 Female x Female /4 Male x Female NV NV NV NV NV NV /8 1/4 3/8 1/2 3/ PNV-HP-S-2-MF PNV-HP-S-4-MF PNV-HP-S-6-MF PNV-HP-S-8-MF PNV-HP-S-12-MF PNV-HP-S-16-MF indd /02/ :09

23 6,000 psi, Check Viton Seals Working Temperature: -26 C to +190 C Manifold 2 Valve manifold pipe to pipe design for separate mounting, connection system impulse lines and transmitters, having a simple 2 valve configuration, which allows for easy block, bleed and calibration of static pressure transmitter of gauge. Maximum Working Pressure: 400 bar 3 Valve manifold pipe to pipe design for connecting system impulse lines and transmitters. This valve consists of 1/2 NPT female connectors on 54mm centres and 1 equalizer valve and 2 block valves. Cracking Other mounting options are available on request. Other mounting options are available on request. Pressure: psi Female, NPT 0292 PCV-02-SS-FF PCV-04-SS-FF PCV-06-SS-FF PCV-08-SS-FF PCV-12-SS-FF PCV-16-SS-FF 1/8 1/4 3/8 1/2 3/ ,000 psi Check Working Temperature: -26 C to +190 C 2 Valve Manifold, Pipe to Pipe, NPT 0380 P2VM-SS-8-R / P3VM-SS-8-R 1/ Valve manifold remote mount flange to flange design for separate mounting, connecting system impulse lines and transmitters, having a simple 2 valve configuration, which allows for easy block, bleed and calibration of static pressure transmitter of gauge. 5 Valve manifold pipe to pipe design for connecting system impulse lines and transmitters. This valve consists of 1/2 NPT female connectors on 54mm centres to suit the inlet connection. This valves provides 2 instrument isolating valves, 2 equalizer valves and 1 bleed valve (for testing). Other mounting options are available on request. Other mounting options are available on request. Cracking Pressure: 0.35 psi Female, NPT. s 0292 PCV-02-SS-FF-10K PCV-04-SS-FF-10K PCV-06-SS-FF-10K PCV-08-SS-FF-10K PCV-12-SS-FF-10K PCV-16-SS-FF-10K 1/8 1/4 3/8 1/2 3/ ,000 psi Rated Ball Working Temperature: 0 C to +40 C Maximum Working Pressure: 400 bar 2 Valve Manifold, Remote Mount, NPT 0380 P2VM-SS-8-RM 5 Valve Manifold, Pipe to Pipe, NPT 1/ P5VM-SS-8-R Female, NPT / Maximum Working Pressure: 700 bar 3 Valve Manifold, Pipe to Pipe, NPT Section 7 Maximum 414 bar 0292 PBV-2-S-02-FF PBV-2-S-04-FF PBV-2-S-06-FF PBV-2-S-08-FF PBV-2-S-12-FF PBV-2-S-16-FF 1/8 1/4 3/8 1/2 3/ indd /02/ :09

24 316 Swing Check 316 Y Strainers Screen for Y Strainers Working Temperature: +100 C Working Temperature: +100 C 1.0mm per hole, 40 holes per square inch. Section 7 Working Pressure: 200 psi BSPP / / / / / / Working Pressure: 800 psi 797 BSPP / / / / / / / / / / s Hygienic valves - Weld Type Ball 0147 BLV-WT BLV-WT Clamp Type Ball 0147 BLV-CT BLV-CT / Butterfly 0147 BFV-WT / BFV-WT BFV-WT / BFV-WT BFV-WT Butterfly 0147 BFV-CT BFV-CT / BFV-CT BFV-CT BFV-CT

25 Flanged Check Cromax Spring Check Other Sizes on Request. 304SS Body Viton Seal. Other Sizes on Request. Flanged Y Strainer Other sizes on Request Max Pressure: 16 bar ANSI VSG2024SL16 VSG2024SL24 VSG2024SL32 VSG2024SL48 VSG2024SL64 304, BSPP Other Sizes on Request PN VSCCRO30404 VSCCRO30406 VSCCRO30408 VSCCRO30412 VSCCRO30416 VSCCRO30420 VSCCRO30424 VSCCRO / /4 3/8 1/2 3/ /4 1.1/ SS Body Viton Seal. Other Sizes on Request. 1.1/ / Other Sizes on Request VSCCRO31604 VSCCRO31606 VSCCRO31608 VSCCRO31612 VSCCRO31616 VSCCRO31620 VSCCRO31624 VSCCRO /4 3/8 1/2 3/ /4 1.1/ / Other sizes on Request Flanged Gate 316, BSPP 0317 VSG2049SL16 VSG2049SL24 VSG2049SL32 VSG2049SL48 VSG2049SL VSC1624 VSC1632 VSC1640 VSC1648 VSC1664 VSC1696 ANSI VSY1624 VSY1632 VSY1640 VSY1648 VSY1664 VSY / / ANSI / Other Sizes on Request PN VSG1624 VSG1632 VSG1640 VSG1648 VSG1664 VSG s 0317 For Push-in Fittings see page 541 Viton Seal. Other Sizes on Request. VSG2054SL16 VSG2054SL24 VSG2054SL32 VSG2054SL48 VSG2054SL64 PN16 Wafer Check Valve Section / / PN VSCWP32 VSCWP40 VSCWP48 VSCWP64 VSCWP80 VSCWP96 VSCWP128 VSCWP / indd /02/ :10

26 Ball & Check Section 7 s Ball IDEAL Suitable for domestic water services, heating and air-conditioning plants, compressed air systems. -20 C to 150 C in absence of steam 1826 Full Flow Ball Type 090, BSPP 0089 IT / IT / IT / IT / IT IT / IT / IT IT / IT IT Customers who bought from this page also purchased Brass Compression Fittings see pages Full Flow Ball, Brass -20 C to +150 C 1826 Type BV91, Male x Female, Lever Handle, BSPP 0089 BV / BV / BV / BV / BV BV / BV / BV Type BV92, Female x Female, T Handle, BSPP 0089 BV / BV / BV / BV / BV C to +110 C 1826 Male x Male, BSPT 0089 BV / BV / BV / BV BV / BV / BV Suitable for domestic water services, heating & air-conditioning plants, compressed air systems. Brass nickel plated. Lever handle in steel. Thread ISO228 (DIN EN ISO 228 and BS EN ISO 228). -20 C to +110 C in the absence of steam Type BV93, Male x Female, T Handle, BSPP 0089 BV / BV / BV / BV / BV Type 115, Female x Female with Drain Valve, BSPP 0089 IT / IT / IT IT / IT / IT

27 Ball & Check 3 Way Ball -20 C to +150 C 1829 Maximum 25 bar Type BV128, L Ported, BSPP 0089 BV128-14L 1/ BV128-38L 3/ BV128-12L 1/ BV128-34L 3/ BV128-1L BV L 1.1/ BV L 1.1/ BV128-2L Type BV128, T Ported, BSPP 0089 BV128-14T 1/ BV128-38T 3/ BV128-12T 1/ BV128-34T 3/ BV128-1T BV T 1.1/ BV T 1.1/ BV128-2T Mini Ball Suitable for domestic water services, heating and air-conditioning plants, compressed air systems. -0 C to +90 C 1828 Maximum 220 psi Female/Female, BSPP 0089 IT / IT / IT / IT / C to +90 C 1828 Male/Female, BSPP 0089 Maximum 220 psi IT / IT / IT / IT / Standard Flow Ball 1830 Type 216, Vienna, Female x Female, BSPP 0089 IT / IT / IT / IT / IT IT / IT / IT Type 217, Vienna, Male x Female, BSPP 0089 IT / IT / IT / IT / IT IT / IT / IT Section 7 s For Aluminium Hose Tails see page

28 Ball & Check Gas Full Flow Ball, Brass -20 C to +60 C 1832 Bibcock, Ball 1833 Maximum 5 bar Section 7 s 1831 Type BV70, Female x Female, Lever Handle, BSPP 0089 BV / BV / BV / BV / BV BV / BV / BV Type BV71, Male x Female, Lever Handle, BSPP 0089 BV / BV / BV / BV / BV BV / BV / BV Type BV72, T Handle, Female x Female, BSPP 0089 BV / BV / BV / BV / BV Type BV74, T Handle, Male x Female, BSPP 0089 BV / BV / BV / BV / BV For Gas Mini Ball see page 692 Type BV174, Male x Hosetail, BSPP 0089 BV / BV / Lockable eyelet 7mm I.D. -20 C to 80 C 1834 Maximum Working Pressure: PSI With a Lockpad Eye & Brass Connection, BSPP 0089 IT / IT / Brass Drain Ball (DIN EN ISO 228 and BS EN ISO 228). -20 C to +110 C in absence of steam Maximum Working Pressure: 174 psi Tank Filling & Emptying Ball Cock, BSPP 0089 IT / IT / IT /

29 Ball & Check Full Bore 90º Angle Valve Type BV06, Male x Male, BSPP 0089 BV / Ball for use with Manifolds Suitable for domestic water services, heating and air-conditioning plants, compressed air systems. -20 C to 150 C in absence of steam 1827 Full Flow Ball, Straight Male/Female, BSPP 0089 IT / IT / IT IT / C to 150 C in absence of steam 1827 Full Flow Ball, Elbow Male/Female, BSPP 0089 IT / IT / IT Brass Hose Connector for Pumps & Tanks Nominal Pressure 25 bar. Thread ISO228 (DIN EN ISO 228 and BS EN ISO 228) Male BSPT x Female BSPP 0089 IT Strainers Check Suitable for domestic water services, heating and air-conditioning plants, compressed air systems. It can be installed in any position: vertical, horizontal or diagonal. -20 C to 100 C 1837 Europa Check, BSPP 0089 IT / IT / IT / IT IT / IT / IT IT / IT IT Suitable for use with gasoline and fuels in general too. -15 C to 150 C in absence of steam 1840 Roma Check, BSPP C to 150 C 1840, BSPP 0089 IT / IT / IT / IT IT / IT / IT IT / IT IT IT / IT / IT / IT IT / IT / IT Material: Polymer. Thread ISO228 (DIN EN ISO 228 & BS EN ISO 228) Polymer, BSPP 0089 IT / IT / IT / IT IT / IT / IT York Check, BSPP 0089 IT / IT / IT / IT IT / IT / IT IT / IT IT Body: Brass, Seals: NBR, Spring:. Thread ISO228 (DIN EN ISO 228 & BS EN ISO 228) Block Check, BSPP C to 100 C IT / IT / IT IT / IT / IT Section 7 s 713

30 Ball & Check Foot 0 C to 120 C Section York Brass Body, BSPP Y Strainers s IT IT IT IT108-1 IT IT IT108-2 IT IT108-3 IT Maximum 25 bar PN10/PN16, BSPP 0089 IT IT IT IT IT155-1 IT IT IT155-2 IT IT155-3 IT /4 3/8 1/2 3/ /4 1.1/ / /2 3/ /4 1.1/ / C to 120 C 1840 Brass, BSPP Female, BSPT /2 3/ /4 1.1/ / /2 3/ /4 1.1/ Maximum Working Pressure: 290 bar 0089 IT IT IT IT IT192-1 IT IT IT192-2 IT IT192-3 IT /4 3/8 1/2 3/ /4 1.1/ / PN20, BSPP 0089 IT IT IT157-1 IT IT IT157-2 IT IT157-3 IT C to 110 C Maximum Working Pressure: 290 psi 1840 Male, BSPT MM MM MM MM MM MM Brass, Nickel Plated, BSPP 0089 IT Temperature Range: -20 C to 110 C IT /8 1/2 3/ /4 1.1/ / µm 0089 Working Temperature: -0 C to +80 C Pressure Reducing Brass Gate Working Temperature: -20 C to +100 C IT IT IT193-1 IT IT IT /4 3/8 1/2 3/ /4 1.1/ For Brass Nickel Plated see page indd /02/ :10

31 Ball & Check Adjustable Check, Supply Version Brass nickel plated Female, BSPP Brass nickel plated Male x Female, BSPP /8 1/4 3/8 1 to to to Brass nickel plated Male x Female, BSPP 1012 LE LE LE Adjustable Check, Exhaust Version 1012 LE LE LE /8 1/4 3/8 1 to to to LE LE LE /8 1/4 3/8 1 to to to Non-return Flow Control Regulators steel flow control regulators control the speed of a pneumatic cylinder (models LE ) or the speed of a chemical of food fluid carried (model 7822: for fluids compatible with FKM and PTFE seals) in aggressive environments or submitted to high mechanical or chemical constraints. Designed without retention zones, these models are perfectly suitable for food applications or requiring frequent washing of installations. Legris stainless steel non-return valves allow fluids to pass in one direction whilst blocking flow in the other direction. Robust and extremely compact, they are suitable for use as a safety item in all fluids circuits. They are ideal for use in severe conditions and in aggressive environments. Operation: A stainless steel valve blocks the fluid passage, when the pressure differential is lower than 0.25 bar. Working Temperature: -20 C to 180 C 0.5 to 40 bar s 1 to 16 bar Uni-directional, Female/Female, BSPP Uni-directional, Female/Male, BSPP LE LE LE LE LE LE /8 1/4 3/8 1/2 3/ LE LE LE LE LE LE /8 1/4 3/8 1/2 3/ In-line, 1 Way Adjustment, BSPP /8 1/4 3/8 1/ In-line, Bi-directional, BSPP 1/8 1/4 3/8 1/2 Uni-directional, Male/Female, BSPP LE LE LE LE LE LE Uni-directional, Female/Female, NPT LE LE LE LE Working Temperature: -15 C to 120 C LE LE LE LE Section 7 Adjustable Check 1/8 1/4 3/8 1/2 3/ LE LE LE LE /8 1/4 3/8 1/ indd /02/ :10

32 Ball Section 7 s Mini Ball -20 C to +80 C Push-in 3/2 with Vent 1012 Max Working Pressure: 10 bar LE LE LE LE LE Thread with 3/2 Vent, BSPP 1012 LE / LE / LE / LE / /2 with Push-in Connection 1012 LE LE LE LE LE Male Thread 2/2 with Push-in Connection, BSPP 1012 LE / LE / LE / LE / Standard In-line Vented Ball Max 40 bar Double Female BSPP with Threaded Exhaust 1012 LE / LE / LE / LE / LE Max 20 bar Double Female Panel Mountable with Threaded Exhaust, BSPP 1012 LE / LE / LE / Double Female Vented, BSPP 1012 Max 40 bar LE / LE / LE / LE / LE / LE Standard In-line Ball Double Female Panel Mount, BSPP 1012 LE / LE / LE / LE / Standard Ball for Screw Fixing Double Female, BSPP C to +80 C Max 20 bar -20 C to +80 C Max 40 bar LE / LE / LE / LE / LE / LE

33 Ball Standard 3 Way Ball Temperature Range: -20 C to +80 C L Ported Closed Centre Female Right Angled Porting, BSPP 1012 Maximum Working Pressure: 20 bar LE / LE / LE / LE L Ported Closed Centre Female Right Angled Porting - Panel Mountable, BSPP 1012 LE / LE / LE / L Ported Female Equal Plane Porting - Panel Mountable, BSPP 1012 LE / LE / L Ported Closed Centre Female Right Angled Porting without Closed Position, BSPP 1012 LE / LE / LE / LE / Lockable Ball Legris lockable ball valves have been developed in order to prevent potentially dangerous consequences by unintended operation. Lockable in different positions, this range meets international safety requirements, such as ISO Lockable ball valves feature a plate fixed to the valve body and a plate attached to the valve stem. When the plates are pad-locked together, the valve handle cannot be moved Max Pressure: 40 bar In-line Double Female, BSPP 1012 LE / LE / LE / LE Max Pressure: 40 bar Double Female with Vent, BSPP 1012 LE / LE / LE / LE / LE For Brass Nickel Plated see page 557 The valves are lockable: In both open and closed position, by one padlock: models 0437 and Only in the closed position by up to three padlocks: models 0437 and Max Pressure: 40 bar In-line Double Female with Vent, BSPP 1012 LE / LE / LE / LE Max Pressure: 20 bar Female 3 Way with Sand Blasted Nickel Plated Body, BSPP 1012 LE / Section 7 s 717

34 Safety Section 7 s Safety With the introduction of the European Pressure Directive, which recommend relevant testing and quality assurance with appropriate certification with regard to safety. This range of safety valves are manufactured and tested in accordance to the regulations (DIN 3320.AD SHEET A2/A4) which meets applicable specifications both nationally and internationally. Compliance with the component test report, by the identification the manufacture provides a guarantee for the specified setting values. Test Certificates come as standard. Note: This product is CE marked, to comply with legislation. Nominal Diameter 8mm, 1/4 BSPP Nominal Diameter 10mm, 3/8 BSPP Page 1762 Nominal Diameter 10mm, 1/2 BSPP Nominal Diameter 10mm, 3/4 BSPP Other relief settings available on special request. 718

35 Safety Wade Safety Relief - Series 6000 Specification: The Series 6000 is a high lift safety relief valve with atmospheric discharge suitable for air and inert gas applications. The flow is de-rated and measured in accordance with BS6759 Part 2: The valve re-seats by minus 10% of set pressure Series 6000 High Lift Safety Relief Valve, Male BSPT /06/G/5.5 1/ /06/H/9.0 1/ /06/J/11.0 1/ Maximum Temperature: 140 C Minimum Temperature: -15 C Series 6200 High Lift Safety Relief Valve, Male BSPT /15/G/5.5 1/ /15/H/9.0 1/ /20/G/5.5 3/ for higher pressure ratings are available. Safety valves are PED approved and CE marked. Maximum Temperature: 140 C Minimum Temperature: -15 C Maximum Set Pressure: 12.5 bar Series 6500 High Lift Safety Relief Valve, Male BSPT /15/G/5.5 1/ /25/G/ Specification: The Series 6000 is a high lift safety relief valve with side outlet discharge suitable for air and inert gas applications. The flow is de-rated and measured in accordance with BS6759 Part 2: The valve re-seats by minus 10% of set pressure. for higher pressure ratings are available. Safety valves are PED approved and CE marked Series 6300 High Lift Safety Relief Valve, Male BSPT /15/G/5.5 1/ Pressure Relief All Series 1784 are factory pre-set and sealed to prevent tampering. Manufactured under regulations of The National Board of Boiler & Pressure Vessel Inspectors in accordance with Section VIII of the ASME Code covering valves for pressure vessels. Pre-set pressure relief valves are precision manufactured to protect against equipment damaged or personal injury that may result from dangerous pressure build-up. Automatically vents at selected pressure. Automatically resets when pressure returns to normal. Brass body with stainless steel internal components. Temperature Ranges: Type 1776: 0 C to +180 C (0 F to +350 F) 835 Type 1776, Male, 1/4 NPT 1776K K K K K K K K K K No Test Certs available on the above. Section 7 s Series 6100 High Lift Safety Relief Valve, Male BSPT /06/J/11.0 1/ /10/J/11.0 3/ /15/G/5.5 1/ /15/H/9.0 1/ /15/J/11.0 1/ /20/J/11.0 3/ /25/J/ Individual Test Certs to be requested at the time of order on Wade P & No s. for higher pressure ratings are available. Safety valves are PED approved and CE marked. 719

36 Safety Section 7 High Lift Safety Valve (Fig 500) Applications: The Fig 500 High Lift Safety Valve has been designed primarily for use on unvented hot water heating systems, where a high capacity, emergency steam relief capability is required. High capacity and resilient PTFE seating, also make the Fig 500 ideal for steam, air and inert gas applications. A PTFE to Viton seating design is also available where greater seal tightness is required. Construction: The Fig 500 is constructed in gunmetal, with diaphragm protected working parts and PTFE to metal seating. All wetted parts are manufactured from dezincification resistant materials, approved by the Water Research Centre for use on potable water. Standard inlet and outlet connections have female threads to BS 21, with the outlet connection one size larger than the inlet. Sizes from DN20 upwards, are available with flanged inlet connections; other thread forms are also available. For other specific technical requirements consult the technical department. Note: Due to pressure setting and certification of this product normal delivery will be up to 5 working days, manufacturer s stock permitting. Features: Resilient PTFE seating designs. High degree of seating tightness. Suitable for hot water, steam and air. High discharge capacity. Diaphragm protected working parts. Safe manual testing. Page 1398 Easy inspection and cleaning. Pressure setting locked & sealed. Designed and tested to BS Capacities certified by ATOC. Approved by Water Research Centre. UKWFBS listed. s BSPP /8 1/ /8 1/ /8 1/ /8 1/ /8 1/ /8 1/ /8 1/ /8 1/ /8 1/ /8 1/ /8 1/ /8 1/ /8 1/ /8 1/ /8 1/ /8 1/ /8 1/ /2 3/ /2 3/ /2 3/ /2 3/ /2 3/ /2 3/ /2 3/ /2 3/ /2 3/ /2 3/ We have listed all the popular sizes and pressure ratings, however other variations are available /2 3/ /2 3/ /2 3/ /2 3/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /4 1.1/ /4 1.1/ /4 1.1/ /4 1.1/ /4 1.1/ /4 1.1/ /4 1.1/ / / / / / / / / / / Individual Test Certs to be requested at the time of order 720

37 Safety Safety Relief Valve (Fig 542) Applications: The Fig 542 Safety Valve is an extremely versatile valve, suitable for use on hot water, steam or air. Although designed primarily for the protection of hot water boilers, its wide range of applications make it an ideal valve for has a general purpose safety valve. Construction: The Fig 542 is of gunmetal construction, with diaphragm protected working parts and PTFE to metal seating. All wetted parts manufactured from dezincification resistant materials, approved by the Water Research Centre for use on potable water. Inlet and outlet connections are of equal size, with female threads to BS 21. Sizes from DN32 upwards, are also available with flanged inlet connections. For other specific technical requirement refer to drawing 705 or consult Nabic technical department. Note: Due to pressure setting and certification of this product normal delivery will be up to 5 working days, manufacturer s stock permitting. Features: Resilient PTFE seating designs. High degree of seat tightness. Suitable for hot water, steam or air. Diaphragm protected working parts. Safe manual testing. Easy inspection and cleaning. Page 1399 Pressure setting locked and sealed. Designed and tested to BS Capacities certified by ATOC Approved by Water Research Centre. UKWFBS listed. Section 7 BSPP / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / s Individual Test Certs to be requested at the time of order 721

38 Safety Section 7 Liquid Relief Valve (Fig 542L) Applications: NABIC Liquid Relief are intended for use where pressure tightness is required on the discharge side of the valve. They are ideal for use on pump relief and bypass relief applications, also on outside installations and where tamper proof units are required. Available options are: steel springs, high pressure versions and viton seat design. Construction: The valves are of gunmetal construction with top guided copper alloy parts, fitted with chrome vanadium spring as standard they also incorporate the proven NABIC PTFE to metal seating design. O-Ring seals ensure pressure tightness at cover and cap joints. Note: Due to pressure setting and certification of this product normal delivery will be up to 5 working days, manufacturer s stock permitting. Request Tech-Sheet No for Technical Information. Features: High degree of seat tightness. Designed and tested to BS Page 1400 WRAS approved for use on potable water. Certified discharge tables. s BSPP L / L / L / L / L / L / L / L / L / L / L / L / L / L / L / L / L / L / L / L / L / L / L / L / L / L / L / L L L L L L L L L L L L L L / L / L / L / L / L / L / L / L / L / L / L L L L L L L L L / L / L / L / L L Individual Test Certs to be requested at the time of order 722

39 Safety Atmospheric Safety, 6mm-15mm Seetru Atmospheric Discharge Safety Relief valves are compact, highly efficient and incorporate the exclusive Tutchtite seal technology to give repeatable bubble tight sealing performance. Suitable for Air & Gases including refrigerant. Type approved and/or manufactured in comformance with national and international standards which include BS6759 Part 2 & 3, ISO 4126 and TUV (Germany) in accordance with AD Merkblatt A2. Compliant with the requirements of the European Directive 97/23/EC and CE marked Flow rates calculated: Std Ltrs/Sec of 15 C Seals: Viton Sealing: Elastomer Nominal Bore 6mm, 1/4 BSPT Male 0171 SEE010EA1B SEE0107A1B SEE0106A1B Nominal Bore 8mm, 1/4 BSPP Male 0171 SEE9111A1B SEE9112A1B SEE9113A1B SEE9114A1B SEE9115A1B SEE911AA1B SEE911BA1B SEE911CA1B SEE911EA1B SEE911FA1B SEE911GA1B SEE911HA1B SEE9119A1B SEE9118A1B SEE911JA1B SEE9117A1B SEE911LA1B SEE911MA1B SEE9116A1B SEE911NA1B SEE911PA1B SEE911XA1B MaximumTemperature: 180 C Nominal Bore 8mm, 1/4 BSPT Male 0171 SEE011EA1B SEE0117A1B SEE0116A1B Nominal Bore 8mm, 3/8 BSPT Male 0171 SEE021DA1B SEE0216A1B SEE021PA1B Nominal Bore 8mm, 3/8 BSPP Male 0171 SEE921FA1B SEE921HA1B SEE9218A1B SEE921LA1B SEE9216A1B SEE921PA1B SEE921XA1B Nominal Bore 10mm, 1/2 BSPT Male Nominal Bore 10mm, 1/2 BSPP Male 0171 SEE9320A1B SEE9322A1B SEE9324A1B SEE932AA1B SEE932BA1B SEE932DA1B SEE932EA1B SEE932FA1B SEE932GA1B SEE932HA1B SEE9329A1B SEE9328A1B SEE932JA1B SEE9327A1B SEE932LA1B SEE932MA1B SEE9326A1B SEE932NA1B SEE932PA1B SEE932RA1B SEE932XA1B SEE932YA1B Nominal Bore 10mm, 3/4 BSPP Male 0171 SEE942FA1B SEE942HA1B SEE9428A1B SEE9427A1B SEE9426A1B Section 7 s 0171 SEE032EA1B SEE0327A1B SEE0326A1B Individual Test Certs come as standard with above Nominal Bore 15mm, 3/4 BSPT Male 0171 SEE0447A1B SEE0436A1B Nominal Bore 15mm, 1 BSPT Male 0171 SEE0546A1B

40 Safety Section 7 Brass Enclosed Safety, Liquid Duty Nominal Bore, 10mm-13mm Seetru Enclosed Discharge Safety Relief valves are compact and highly efficient. Polymers such as Viton, Nitrile, Silicone, Neoprene and EPDM offer excellent sealing performance. These valves are suitable for for a wide range of applications. They are available is stainless steel, dezincification resistant brass or a combination of dezincification resistant brass with stainless steel trim. Type approved and/or designed in accordance with national & international standards which include BS6759 part 2 & 3, ISO4126-1:1991, TUV (Germany) in compliance with AD Merkblatt A2 and BAM (Germany) requirements for oxygen. Compliant with the requirements of the European Pressure Directive 97/23/EC and CE marked. Oxygen service valves are subject to degreasing at additional cost. Seals: Viton Sealing: Elastomer Maximum Temperature: 180 C Liquid Duty Only Calculated: Kg/hr 15 C Maximum Temperature: 180 C Liquid Duty Only Calculated: Kg/hr 15 C Maximum Temperature: 180 C Liquid Duty Only Calculated: Kg/hr 15 C s mm, 3/8 x 3/4 BSPP Male/Female 0171 SEE9221P2B SEE9222P2B SEE9223P2B SEE9224P2B SEE9225P2B SEE922AP2B SEE922BP2B SEE922CP2B SEE922DP2B SEE922EP2B SEE922FP2B SEE922GP2B SEE922HP2B SEE9229P2B SEE9228P2B SEE922JP2B SEE9227P2B SEE922KP2B SEE922MP2B SEE9226P2B SEE922NP2B SEE922PP2B SEE922RP2B mm, 1/2 x 3/4 BSPP Male/Female 0171 SEE9321P2B SEE9322P2B SEE9323P2B SEE9324P2B SEE9325P2B SEE932AP2B SEE932BP2B SEE932CP2B SEE932DP2B SEE932EP2B SEE932FP2B SEE932GP2B SEE932HP2B SEE9329P2B SEE9328P2B SEE932JP2B SEE932KP2B SEE932LP2B SEE932MP2B SEE9326P2B SEE932NP2B SEE932PP2B SEE932RP2B mm, 3/4 x 1 BSPP Male/Female 0171 SEE9431P2B SEE9432P2B SEE9433P2B SEE9434P2B SEE9435P2B SEE943AP2B SEE943BP2B SEE943CP2B SEE943DP2B SEE943EP2B SEE943FP2B SEE943GP2B SEE943HP2B SEE9439P2B SEE9438P2B SEE943JP2B SEE9437P2B SEE943KP2B SEE943LP2B SEE943MP2B SEE9436P2B SEE943NP2B SEE943PP2B SEE943RP2B , 20 and 25 nominal bore valves available in 1.1/4 & 1.1/2 sizes. Ask our technical department for additional information. Individual Test Certs come as standard with above 724

41 Automatic Air Elimination Air Eliminators Temperature Rating: 93 C Pressure Rating: 10 bar Boiler Vent Temperature Rating: 93 C Pressure Rating: 7 bar Section 7 BSPP 0115 AE-A Type A Vertical 1/2 3/ AE-B Type B Vertical Lockshield Isolator 1/2 3/ AE-C Type C Vertical Lockshield & Check Valve 1/2 3/ Service Kits 0115 AE-SP-ABD Float Assembly for Type A, B & D Valve AE-SP-C Float Assembly for Type C Valve Univent Boiler Vent, Fig 1688, BSPP 0115 UV D UV D 1.1/ UV D Temperature Rating: 93 C 548 Pressure Rating: 7 bar s For KELM Angle Seat see page Way Boiler Vent, Fig 1988, BSPP 0115 VCN VCN / VCN

42 Sight Glasses & Flow Indicators Section Series - All A low cost, all stainless steel sight flow indicator straight through type Maximum Rating: 10 bar at 200 C 400 Series - Straight Through Sight Flow Indicator with Spinner/Ball Maximum Rating: 7 bar at 100 C With Spinner, Gun Metal Maximum Rating: 7 bar at 100 C With Ball, Gun Metal s 233 Model Through Type 0115 RHO-FIS /2 BSPT RHO-FIS BSPP A low cost, all stainless steel sight flow indicator fitted with a flap & scale plate to give an indication of the flow rate Maximum Rating: 10 bar at 200 C 234 Model with Flap & Plate 0115 RHO-FIS /2 BSPT RHO-FIS /2 BSPP RHO-FIS /4 BSPP RHO-FIS BSPT RHO-FIS /2 BSPT RHO-FIG /4 BSPT RHO-FIG /4 BSPP RHO-FIG /8 BSPT RHO-FIG /8 BSPP RHO-FIG /2 BSPT RHO-FIG /2 BSPP RHO-FIG /4 BSPT RHO-FIG /4 BSPP RHO-FIG BSPT RHO-FIG BSPP Maximum Rating: 16 bar at 100 C With Spinner, 0115 RHO-FIS /4 BSPT RHO-FIS /8 BSPT RHO-FIS /8 BSPP RHO-FIS /2 BSPT RHO-FIS /2 BSPP RHO-FIS /4 BSPT RHO-FIS BSPT RHO-FIS BSPP RHO-FIG /4 BSPT RHO-FIG /4 BSPP RHO-FIG /8 BSPT RHO-FIG /2 BSPT RHO-FIG /2 BSPP RHO-FIG /4 BSPT RHO-FIG /4 BSPP RHO-FIG /4 NPT RHO-FIG BSPT RHO-FIG BSPP For Fittings see page

43 Commissioning Art 25, Fixed Orifice EPDM Seat Temperature Rating: -10 C to +120 C Maximum Pressure Rating: 16 bar Art 26, Double Regulating Temperature Rating: -10 C to +120 C Maximum Pressure Rating: 20 bar Art 27, Metering Station Temperature Rating: -10 C to +120 C Maximum Pressure Rating: 20 bar DZR Brass, BSPP DZR Brass, BSPP DZR Brass, BSPP Section ADRE / ADRE / ADRE ADRE / ADRE / ADRE Art 28, Variable Orifice Temperature Rating: -10 C to +120 C Maximum Pressure Rating: 20 bar ADRF / ADRF / ADRF ADRF / ADRF / ADRF Art 250, Double Regulating, Flanged Flanged PN16 Temperature Rating: -10 C to +120 C Maximum Pressure Rating: 16 bar ADRF / ADRF / ADRF ADRF / ADRF / ADRF Art 270, Metering Station Wafer Pattern Temperature Rating: -10 C to +120 C Maximum Pressure Rating: 16+ bar s DZR Brass, BSPP 0205 ADRX / ADRX / ADRX ADRX / ADRX / ADRX Ductile, BSPP 0205 ADRD ADRD / ADRD ADRD ADRD ADRD ADRD ADRD ADRD ADRC ADRC / ADRC ADRC ADRC ADRC ADRC ADRC ADRC

44 Weir Diaphragm Art 510, BSPT Temperature Rating: -10 C to +90 C Art 520, Flanged Temperature Rating: -10 C to +80 C Section 7 s Ductile, BSPT 0205 ADIA / ADIA / ADIA ADIA / ADIA / ADIA Cast, PN ADIA / ADIA / ADIA ADIA / ADIA ADIA / ADIA ADIA ADIA ADIA For Rubber Flange Gaskets see page

45 Cast Page Art 77 Full Bore Ball Valve, Flanged ISO 5211 Direct mounting for actuation Brass Ball Temperature Rating: -10 C to +150 C ISO 5211, PN GG25 Cast Body PTFE Seals Maximum Pressure Rating: 16 bar AIVD77100LB AIVD77150LB 1.1/ AIVD77200LB AIVD77250LB 2.1/ AIVD77300LB AIVD77400LB AIVD77500LB AIVD77600LB AIVD77800LB Art 235 Gate Valve, Flanged BS5150 & BS EN558-1 Stem Cast Body Bronze Seat Ring Temperature Rating: -10 C to +230 C Maximum Pressure Rating: 16 bar Art 210 Gate, Flanged Brass Stem Cast Body Bronze Seat Ring Temperature Rating: -10 C to +150 C Maximum Pressure Rating: 16 bar BS 3464, BS 10 Table E & D 0205 ACST ACST / ACST ACST ACST ACST ACST Art 170 Swing Check Valve, Flanged Cast Body Bronze Body Seat Ring Bronze Disc Seat Ring Temperature Rating: -10 C to +230 C Maximum Pressure Rating: 16 bar Art 121 Wafer Check Valve Cast Body Disc EPDM Seals Universal Flange Mounting, PN16/10 & ASA Maximum Pressure Rating: 16 bar ACSC ACSC / ACSC ACSC ACSC ACSC ACSC ACSC ACSC Art 185 Y Strainer, Flanged Cast Body Screen Temperature Rating: -10 C to +230 C Temperature Rating: -10 C to +120 C Maximum Pressure Rating: 16 bar Section 7 s BS EN , PN ACST ACST / ACST ACST ACST ACST ACST ACST ACST BS EN , PN ACST ACST / ACST ACST ACST ACST ACST ACST ACST BS EN PN ACST ACST / ACST ACST ACST ACST ACST ACST ACST

46 NAMUR Solenoid VII Standard Explosion Proof ATEX Ex Instrinsically Safe Patented Poppet Valve Design Comparison Overview Puretorq Solenoid Valve Patented Poppet valve design minimises friction by utilising dual static rolling diaphragm-poppet seals Advantage of this design is its suitability for cryogenic environments. Wide operating temperature range -4ºF to +140ºF (-20ºC to +60ºC) (Atex upto +122ºF) Typical O-Ring Seal Design Traditional solenoid valves operate a spool to direct airflow The O-ring type seals are subject to contant abrasion, reducing their lifetime and reliability The operating temperature is usually limited to no less than -5ºC 730 Application Control of quarter-turn and linear process valve actuators Control of diaphragm valves General automation Media Compressed air, lubricated or non-lubricated Instrument air Nitrogen Features & Benefits For use with compressed air (lubricated or non-lubricated), instrument air and nitrogen 5/2 and 3/2 function selectable via 180º rotation of single adaptor plate for use on both single and double acting actuators Corrosion resistant construction with standard manual override Direct mounting conforms to NAMUR VDI/VDE 3845 standard Exhaust feedback - provides spring chamber with instrument air preventing corrosion Unique patented Poppet valve technology provides high flow, fast response, high temperature range and multi-million cycle life reliability

47 Solenoid Technical: Corrosion resistant construction with standard manual override. Direct mounting conforms to NAMUR VDI/VDE 3845 standard. 5/2 and 3/2 function selectable via 180 rotation of single adaptor plate. Page NAMUR Solenoid VII Section 7 Standard, 1/4 BSPP 0332 VSK-NCE0-AC V AC VSK-NCE0-AC V AC VSK-NCE0-DC024 24V DC VSK-NCE0-AC024 24V AC Explosion Proof, 1/4 BSPP 0332 VEK-NCN0-AC V AC VEK-NCN0-AC V AC VEK-NCN0-DC024 24V DC s ATEX Ex, 1/4 BSPP 0332 VAK-NCN0-AC V AC VAK-NCN0-AC V AC VAK-NCN0-DC024 24V DC Instrinsically Safe, 1/4: BSPP 0332 VIK-NSN0-DC024 24V DC

48 ACTUATORS & ACTUATED BALL VALVES Double Acting Actuated Ball Valve Assembly Single Acting Actuated Ball Valve Assembly KELM s ongoing investment in technology and resource builds Trust and Confidence in the marketplace, assuring continuity in all aspects of Engineering Distinction. Double Acting & Single Acting ISO 5211 Mounting Pad Rack and Pinion Design Long Life NAMUR Interface -20ºC to +80ºC 2.5 bar to 8 bar Double Acting Actuator indd /02/ :16

49 Actuation Rotary Actuators Technical Information Specification Fluid Dry or Lubricated Air (to be filtered by 30 um filter element) Operating Pressure 0.25Mpa (36psi) to 0.8Mpa (114psi) Temperature 20 C to +80 C Travel Adjustment ±5 at 0 & 90 Design Innovative and patented rack and pinion pneumatic actuators, available in double acting and spring return options. Each actuator features a top mount multi-function indicator with openclose stop adjustment as standard. In addition, state-of-the-art engineering has enabled a reduction in the size of actuator without losing any torque. Mounting Standard Air supply connection is designed in accordance with NAMUR standards to install solenoid valves. Structure The NAMUR drive pinion and the NAMUR top mounting connection permit direct installation of accessories such as limit switch boxes and positioners. 1 Indicator Position indicator with NAMUR is convenient for mounting accessories such as limit switch box, positioners, etc. 2 Pinion The high-precision and integrative pinion is made from nickel alloy steel and fully conforms to the latest standards of ISO5211, DIN3337 NAMUR. The dimensions can be customised and stainless steel option is available. 3 Actuator body Extruded aluminium alloy ASTM6005 body. 4 End caps Die-casting aluminium powder polyester painted in black. 5 Pistons The twin rack pistons are made from die casting aluminium treated with a hard anodised coating or made from cast steel with galvanisation. Features and benefits include; symmetric mounting position, long life cycle and fast operation. Rotation can be reversed by simply inverting the pistons. 6 Travel adjustment The two independent external travel stop adjustment bolts can be altered at both open and closed directions easily and precisely. Bottom mounting connection is designed in accordance with ISO5211 and DIN3337 standards for direct mounting with valve gear boxes or mounting brackets. 7 High performance springs Pre-loaded coated springs are made from a high quality marerial for improved corrosion resistance and enhanced life cycle. Can be demounted safely and conveniently to satisfy different torque requirements by changing quantity of springs. 8 Bearings and guides Made from low friction, long-life compound material, to avoid the direct contact between metals. Maintenance and replacement is easy and convenient. 9 O-rings NBR rubber O-rings provide trouble-free operation at standard temperature ranges. For high and low temperature, viton or silicone is used

50 Rotary Actuators Working Temperature: -20 C to +80 C Maximum Working Pressure: 2.5 to 8 bar Media: Dry or lubricated compressed air, to be filtered by a 30µm filter element Travel Adjustment: +5º on the rotation 0º and 90º Section 7 Double Acting Actuators Single Acting Actuators Aluminium Aluminium s 0364 KRT007DA KRT012DA KRT020DA KRT035DA KRT050DA KRT075DA KRT110DA KRT160DA KRT255DA KRT435DA KRT665DA KRT1000DA KRT1200DA KRT1800DA KRT2700DA KRT3800DA KRT5700DA For ISO Pads see page 687 & page KRT020SRK KRT035SRK KRT050SRK KRT075SRK KRT110SRK KRT160SRK KRT255SRK KRT435SRK KRT665SRK KRT1000SRK KRT1200SRK KRT1800SRK KRT2700SRK KRT3800SRK KRT5700SRK Limit Switch Boxes Captive cover bolts Easy mounting IP NAMUR Standard, Shaft & Bracket 0364 KLS-820M

51 Actuated Process Ball Actuator Working Temperature: -20 C to +80 C Ball Valve Working Temperature: -20 C to +95 C Nickel Plated Brass Body Ball Actuator 2.5 to 8 bar Ball Valve Maximum Working Pressure: 3/8 16 bar 1/2 to 2 40 bar Actuator Media: Dry or lubricated compressed air, to be filtered by a 30µm filter element Travel Adjustment: +5º on the rotation 0º and 90º Nickel Plated Brass Body Ball, WRAS Approved Ball Valve Full Bore Section 7 Double Acting, Aluminium Actuator, BSPP / / / / / Double Acting, Aluminium Actuator, BSPP / / / / s Single Acting, Aluminium Actuator, BSPP / / / / / Single Acting, Aluminium Actuator, BSPP / / / / For more Ball Valve Assemblies options, please contact our Business Development Team 735

52 Actuated Process Ball Actuator Working Temperature: -20 C to +80 C Ball Valve Working Temperature: -20 C to +200 C Actuator 2.5 to 8 bar Ball Valve Maximum Working Pressure: 70 bar (1000psi) Actuator Ball Valve Media: Dry or lubricated compressed air, to be Full Bore filtered by a 30µm filter element Travel Adjustment: +5º on the rotation 0º and 90º Section 7 s 2 Piece Body Ball Double Acting, Aluminium Actuator, BSPP / / / / / / Piece Body Ball Double Acting, Aluminium Actuator, BSPP / / / / / / / Single Acting, Aluminium Actuator, BSPP / / / / / / Single Acting, Aluminium Actuator, BSPP / / / / / / / For more Ball Valve Assemblies options, please contact our Business Development Team

53 Actuated Process Ball Actuator Working Temperature: -20 C to +80 C Ball Valve Working Temperature: -20 C to +200 C Actuator 2.5 to 8 bar Ball Valve Maximum Working Pressure: 70 bar (1000psi) Actuator Ball Valve Media: Dry or lubricated compressed air, to be Full Bore filtered by a 30µm filter element Travel Adjustment: +5º on the rotation 0º and 90º 3 Piece Body Ball, Socket Weld Double Acting, Aluminium Actuator / / / / / / / Piece Body Ball, Butt Weld Double Acting, Aluminium Actuator / / / / / / / Section 7 s Single Acting, Aluminium Actuator / / / / / / / Single Acting, Aluminium Actuator / / / / / / / For more Ball Valve Assemblies options, please contact our Business Development Team 737

54 SOLENOID VALVES New to the range of pneumatics, the General Purpose Brass 2/2 Solenoid again show the commitment to providing Innovative and Added Value solutions to their customers Pilot Operated 2/2 Solenoid Valve Enhanced Quality Performance Pilot Operated 2/2: Normally Open Normally Closed DIN Connectors Valve Timers DC & AC Coils Available in sizes 3/8" to 2" BSPP Media: Oil, Air & Water Direct Acting 2/2 Solenoid Valve Direct Acting 2/2: Normally Closed DIN Connectors DC & AC Coils Available in sizes 1/8" to 3/8" BSPP Available in 0-10 bar & 0 to 35 bar High Pressure Option Media: Oil, Air & Water Valve Timer 738

55 Pilot Operated General Purpose Solenoid Pressure Range: 0.5 to 10 bar Page /2 Normally Closed Coils to Suit K225 Normally Closed Section 7 3/8 BSPP Flow 55 lpm Orifice 13mm 1 BSPP Flow 160 lpm Orifice 25mm Coil & Plug K AC-NC 230/50V AC K AC-NC 110/50V AC K AC-NC 24/50V AC K DC-NC 24V DC K DC-NC 12V DC /2 BSPP 0366 Flow 63 lpm Orifice 13mm K AC-NC 230/50V AC K AC-NC 110/50V AC K AC-NC 24/50V AC K DC-NC 24V DC K DC-NC 12V DC /4 BSPP 0366 Flow 100 lpm Orifice 25mm K AC-NC 230/50V AC K AC-NC 110/50V AC K AC-NC 24/50V AC K DC-NC 24V DC K DC-NC 12V DC K AC-NC 230/50V AC K AC-NC 110/50V AC K AC-NC 24/50V AC K DC-NC 24V DC K DC-NC 12V DC /4 BSPP 0366 Flow 370 lpm Orifice 38mm K AC-NC 230/50V AC K AC-NC 110/50V AC K AC-NC 24/50V AC K DC-NC 24V DC K DC-NC 12V DC /2 BSPP 0366 Flow 400 lpm Orifice 38mm K AC-NC 230/50V AC K AC-NC 110/50V AC K AC-NC 24/50V AC K DC-NC 24V DC K DC-NC 12V DC K /50AC-NC 230/50V AC K /50AC-NC 110/50V AC K225-24/50AC-NC 24/50V AC K225-24DC-NC 24V DC K225-12DC-NC 12V DC Valve Timer s 2 BSPP 0366 Flow 540 lpm Orifice 50mm K AC-NC 230/50V AC K AC-NC 110/50V AC K AC-NC 24/50V AC K DC-NC 24V DC K DC-NC 12V DC KVT

56 Pilot Operated General Purpose Solenoid Pressure Range: 0.5 to 10 bar Page Section 7 2/2 Normally Open Coils to Suit K225, Normally Open 3/8 BSPP Flow 55 lpm Orifice 13mm 1 BSPP Flow 160 lpm Orifice 25mm Coil & Plug s K AC-NO 230/50V AC K AC-NO 110/50V AC K AC-NO 24/50V AC K DC-NO 24V DC K DC-NO 12V DC /2 BSPP 0366 Flow 63 lpm Orifice 13mm K AC-NO 230/50V AC K AC-NO 110/50V AC K AC-NO 24/50V AC K DC-NO 24V DC K DC-NO 12V DC /4 BSPP 0366 Flow 100 lpm Orifice 25mm K AC-NO 230/50V AC K AC-NO 110/50V AC K AC-NO 24/50V AC K DC-NO 24V DC K DC-NO 12V DC K AC-NO 230/50V AC K AC-NO 110/50V AC K AC-NO 24/50V AC K DC-NO 24V DC K DC-NO 12V DC /4 BSPP 0366 Flow 370 lpm Orifice 38mm K AC-NO 230/50V AC K AC-NO 110/50V AC K AC-NO 24/50V AC K DC-NO 24V DC K DC-NO 12V DC /2 BSPP 0366 Flow 400 lpm Orifice 38mm K AC-NO 230/50V AC K AC-NO 110/50V AC K AC-NO 24/50V AC K DC-NO 24V DC K DC-NO 12V DC K /50AC-NO 230/50V AC K /50AC-NO 110/50V AC K225-24/50AC-NO 24/50V AC K225-24DC-NO 24V DC K225-12DC-NO 12V DC Valve Timer 2 BSPP 0366 Flow 540 lpm Orifice 50mm K AC-NO 230/50V AC K AC-NO 110/50V AC K AC-NO 24/50V AC K DC-NO 24V DC K DC-NO 12V DC KVT

57 Direct Acting General Purpose Solenoid Page /2 Normally Closed Pressure Range: 0 to 10 bar 2/2 Normally Closed, High Pressure Pressure Range: 0 to 35 bar Coils to Suit K2W Direct Acting Section 7 1/8 BSPP 0366 Flow 3.4 lpm Orifice 2.5mm K2W AC 230/50V AC K2W AC 110/50V AC K2W AC 24/50V AC K2W DC 24V DC K2W DC 12V DC /4 BSPP 0366 Flow 3.4 lpm Orifice 2.5mm K2W AC 230/50V AC K2W AC 110/50V AC K2W AC 24/50V AC K2W DC 24V DC K2W DC 12V DC /8 BSPP 0366 Flow 0.7 lpm Orifice 1.2mm K2WH AC 230/50V AC K2WH AC 110/50V AC K2WH AC 24/50V AC K2WH DC 24V DC K2WH DC 12V DC /4 BSPP 0366 Flow 0.7 lpm Orifice 1.2mm K2WH AC 230/50V AC K2WH AC 110/50V AC K2WH AC 24/50V AC K2WH DC 24V DC K2WH DC 12V DC Coil & Plug, Normally Closed to Suit 1/8, 1/4 BSPP 0366 K2W /50AC 230/50V AC K2W /50AC 110/50V AC K2W-08-24/50AC 24/50V AC K2W-08-24DC 24V DC K2W-08-12DC 12V DC Coil & Plug, Normally Closed to Suit 3/8 BSPP 0366 K2W /50AC 230/50V AC K2W /50AC 110/50V AC K2W /50AC 24/50V AC K2W DC 24V DC K2W DC 12V DC s 3/8 BSPP Flow 6 lpm Orifice 4mm 3/8 BSPP Flow 1.7 lpm Orifice 2mm 0366 K2W AC 230/50V AC K2W AC 110/50V AC K2W AC 24/50V AC K2W DC 24V DC K2W DC 12V DC K2WH AC 230/50V AC K2WH AC 110/50V AC K2WH AC 24/50V AC K2WH DC 24V DC K2WH DC 12V DC

58 ANGLE SEAT VALVES STAINLESS STEEL BODY Construction: Body: 316 Actuator: PA Nylon or 316 Operation: Normally Open Normally Closed Working Pressure Range: 3-16 bar Working Temperature: Medium Temp -10 C to +180 C Environmental Temp PA Nylon -10 C to +60 C 110 C to +80 C Features: Maintenance free actuator Long life piston rings Easy installation 360º positional actuator head Leak free after five million cycles Compact Design Fast response Water hammer-free Cost effective against other materials Applications: Food & Beverage Plants Textile Factories Pharmaceuticals Manufacture Laundries Water & Sewage Plants Petrochemical Plants Automotive Sites

59 Pilot Operated Angle Seat Page Compact design, available in both Normally Open and Normally Closed options. Normally Closed - Closes with the flow. Normally Open - Closes against the flow. High flow. 360 Actuator housing rotation. Single acting spring return. Suitable for use with Water, Oil, Air, Aggressive Media & Steam. 316 Valve, PA Nylon Actuator Material: Body: 316L Actuator: PA Seals: PTFE Working Pressure Range: 3-16 bar 316 Valve, Actuator Material: Body: 316L Actuator: 316L Seals: PTFE Working Temperature: Medium Temp -10 C to +180 C Environmental Temp PA Nylon -10 C to +60 C 110 C to +80 C Section 7 2 Way 63mm Actuator Normally Closed, BSPP 0381 KASV-SSP-38-NC 3/ KASV-SSP-12-NC 1/ KASV-SSP-34-NC 3/ KASV-SSP-1-NC KASV-SSP-114-NC 1.1/ KASV-SSP-112-NC 1.1/ KASV-SSP-2-NC KASV-SSP-212-NC 2.1/ KASV-SSP-3-NC Way 63mm Actuator Normally Closed, BSPP 0381 KASV-SSSS-38-NC 3/ KASV-SSSS-12-NC 1/ KASV-SSSS-34-NC 3/ KASV-SSSS-1-NC KASV-SSSS-114-NC 1.1/ KASV-SSSS-112-NC 1.1/ KASV-SSSS-2-NC KASV-SSSS-212-NC 2.1/ s 2 Way 63mm Actuator Normally Open, BSPP 0381 KASV-SSP-38-NO 3/ KASV-SSP-12-NO 1/ KASV-SSP-34-NO 3/ KASV-SSP-1-NO KASV-SSP-114-NO 1.1/ KASV-SSP-112-NO 1.1/ KASV-SSP-2-NO KASV-SSP-212-NO 2.1/ KASV-SSP-3-NO Way 63mm Actuator Normally Open, BSPP 0381 KASV-SSSS-38-NO 3/ KASV-SSSS-12-NO 1/ KASV-SSSS-34-NO 3/ KASV-SSSS-1-NO KASV-SSSS-114-NO 1.1/ KASV-SSSS-112-NO 1.1/ KASV-SSSS-2-NO KASV-SSSS-212-NO 2.1/

60 Solenoid General Purpose 2/2 N/C, Pilot Operated Solenoid 3/8-1 WRAS Approved. EPDM Seal 1.1/2-2 - Buna N General Purpose 2/2 N/O, Pilot Operated Solenoid Section 7 BSPP BSPP s L182D /8 230/50 6 VA B10AA L182D /8 110/50 6 VA B10AC L182D /8 24/50 6 VA B10AE L182D /8 24V DC 5.5 W B10AL L182D /2 230/50 6 VA B10AA L182D /2 110/50 6 VA B10AC L182D /2 24/50 6 VA B10AE L182D /2 24V DC 5.5 W B10AL L182D /4 230/50 6 VA B10AA L182D /4 110/50 6 VA B10AC L182D /4 24/50 6 VA B10AE L182D /4 24V DC 5.5 W B10AL L182D /50 6 VA B10AA L182D /50 6 VA B10AC L182D /50 6 VA B10AE L182D V DC 5.5 W B10AL L180B /2 230/50 14 VA A30AA L180B /2 110/50 14 VA A30AC L180B /2 24/50 14 VA A30AE L180B /2 24V DC 9 W A30AL L180B /50 14 VA A30AA L180B /50 14 VA A30AC L180B /50 14 VA A30AE L180B V DC 9 W A30AL L282B /8 230/50 6 VA B10AA L282B /8 110/50 6 VA B10AC L282B /8 24/50 6 VA B10AE L282B /8 24V DC 5.5 W C10AL L282B /2 230/50 6 VA B10AA L282B /2 110/50 6 VA B10AC L282B /2 24/50 6 VA B10AE L282B /2 24V DC 5.5 W C10AL L282B /4 230/50 6 VA B10AA L282B /4 110/50 6 VA B10AC L282B /4 24/50 6 VA B10AE L282B /4 24V DC 5.5 W C10AL L282B /50 6 VA B10AA L282B /50 6 VA B10AC L282B /50 6 VA B10AE L282B V DC 5.5 W C10AL L280B /2 230/50 14 VA A30AA L280B /2 110/50 14 VA A30AC L280B /2 24/50 14 VA A30AE L280B /2 24V DC 9 W A30AL L280B /50 14 VA A30AA L280B /50 14 VA A30AC L280B /50 14 VA A30AE L280B V DC 9 W A30AL For Reinforced PVC Braided Hose Type RPVC (to BS6066) see pages

61 Solenoid General Purpose 2/2 N/C, Direct Acting Solenoid 870, 871 & 863 1/8-1/4 3/8-1 BSPP L172V /8 230/50 6VA B10AA L172V /8 110/50 6VA B10AC L172V /8 24/50 6VA B10AE L172V /8 24V DC 5.5W B10AL L121V /4 230/50 14VA A30AA L121V /4 110/50 14VA A30AC L121V /4 24/50 14VA A30AE L121V /4 24V DC 9W A30AL L133B /8 230/50 14VA AA L133B /8 110/50 14VA AC L133B /8 24/50 14VA AE L133B /8 24V DC 9W AL Steam & Hot Water 2/2 N/C, Pilot Operated Solenoid 864 L133B /2 230/50 24VA AA L133B /2 110/50 24VA AC L133B /2 24/50 24VA AE L133B /2 24V DC 13W AL L133B /4 230/50 24VA AA L133B /4 110/50 24VA AC L133B /4 24/50 24VA AE L133B /4 24V DC 13W AL L133B /50 33VA EA L133B /50 33VA EC L133B /50 33VA EE L133B V DC 17W AL General Purpose 3/2 N/C, Direct Acting Solenoid 868 & 869 BSPP Section 7 s BSPP L145R /2 230/50 10VA AA L145R /2 110/50 10VA AC L145R /2 24V AC 10VA AE L145R /4 230/50 14VA AA L145R /4 110/50 14VA AC L145R /50 14VA AA L145R /50 14VA AC L372V /8 230/50 6VA B10AA L372V /8 110/50 6VA B10AC L372V /8 24/50 6VA B10AE L372V /8 24V DC 5.5W B10AL L321B02C /4 230/50 14VA A30AA L321B02C /4 110/50 14VA A30AC L321B02C /4 24/50 14VA A30AE L321B02C /4 24V DC 9W A30EL Peter Paul 2/2 N/C, Direct Acting Solenoid NPT 22N9DEM-24 1/4 24V DC 9.5W

62 Solenoid Section 7 2/2 N/C, Direct Acting Solenoid Materials in contact with Fluids. Body: AISI 316 Sealing: FPM Internal Components: Seat: AISI 316 Core Tube: Shading Coil: Copper Supplied with DIN Plugs 2121, 2122 & /2 N/O, Pilot Operated Solenoid Materials in contact with Fluids. Body: AISI 316 Sealing: FPM Internal Components: Seat: AISI 316 Core Tube: Shading Coil: Copper Supplied with DIN Plugs 2154 s BSPP L172V /8 230/50 12VA B12AA L172V /8 110/50 12VA B12AC L172V /8 24/50 12VA B12AE L172V /8 24V DC 5.5W B12AL L176V /4 230/50 12VA C12AA L176V /4 110/50 12VA C12AC L176V /4 24/50 12VA C12AE L176V /4 24V DC 5.5W C12AE L182V /8 230/50 12VA B12AA L182V /8 110/50 12VA B12AC L182V /8 24/50 12VA B12AE L182V /8 24V DC 5.5W B12AL L182V /2 230/50 12VA B12AA L182V /2 110/50 12VA B12AC L182V /2 24/50 12VA B12AE L182V /2 24V DC 5.5W B12AL L182V /4 230/50 12VA B12AA L182V /4 110/50 12VA B12AC L182V /4 24/50 12VA B12AE L182V /4 24V DC 5.5W B12AL L182V /50 12VA B12AA L182V /50 12VA B12AC L182V /50 12VA B12AE L182V V DC 5.5W B12AL BSPP L282V /8 230/50 12VA B12AA L282V /8 110/50 12VA B12AC L282V /8 24/50 12VA B12AE L282V /8 24V DC 5.5W B12AL L282V /2 230/50 12VA B12AA L282V /2 110/50 12VA B12AC L282V /2 24/50 12VA B12AE L282V /2 24V DC 5.5W B12AL L282V /4 230/50 12VA B12AA L282V /4 110/50 12VA B12AC L282V /4 24/50 12VA B12AE L282V /4 24V DC 5.5W B12AL L282V /50 12VA B12AA L282V /50 12VA B12AC L282V /50 12VA B12AE L282V V DC 5.5W B12AL For Tube see page

63 Solenoid Steam & Hot Water 2/2 N/C, Direct Acting Solenoid Replacement Coils 865 BSPP L153D /2 230/50 12VA AA L153D /2 110/50 12VA AC L153D /2 24V AC 12VA AE L153D /4 230/50 12VA AA L153D /4 110/50 12VA AC L153D /4 24V AC 12VA AE L153D /50 27VA AA L153D /50 27VA AC L153D V AC 27VA AE DIN Plug To Suit Sirai Coil Coil 2.30 To Suit Sirai 823AA 230/ AC 110/ AL 24V DC AE 24/ A30AA 230/ A30AC 110/ A30AE 24/ A30AL 24V DC B10AA 230/ B10AC 110/ B10AE 24/ B10AL 24V DC AA 230/ AC 110/ AL 24V DC AA 230/ AC 110/ AE 24/ AL 24V DC EA 230/ EC 110/ EE 24/ AL 24V DC AA 230/ AC 110/ AE 24V AC AA 230/ AC 110/ AE 24V AC AA 230/ AC 110/ AE 24V AC AA 230/ AC 110/ AE 24V AC AA 230/ AC 110/ AE 24/ AL 24V DC Section 7 s 747

64 Process Section 7 s Brass Ball, 2 Way Actuation, Low Pressure ISO 5211 Mounting Pad Working Temperature: Actuator: -20 C to +80 C (Dry Air) Valve: -20 C to +150 C 854 Double Acting, BSPP 0129 D100H003 3/ D100H004 1/ D100H005 3/ D100H D100H / D100H / D100H ISO 5211 Mounting Pad Working Temperature: Actuator: -20 C to +80 C (Dry Air) Valve: -20 C to +150 C 859 Brass Ball, 2 Way Actuation, High Pressure ISO 5211 Mounting Pad Working Temperature: Actuator: -20 C to +80 C (Dry Air) Valve: -20 C to +150 C 855 Double Acting, BSPP 0129 D101H003 3/ D101H004 1/ D101H005 3/ D101H D101H / D101H / D101H D101H / D101H ISO 5211 Mounting Pad Working Temperature: Actuator: -20 C to +80 C (Dry Air) Valve: -20 C to +150 C Single Acting, BSPP Single Acting, BSPP S100H003 3/ S100H004 1/ S100H005 3/ S100H S100H / S100H / S100H S101H003 3/ S101H004 1/ S101H005 3/ S101H S101H / S101H / S101H S101H / S101H

65 Process NAMUR Interface Plates For use with Omal valves when used in conjunction with NAMUR valves. Ball, 2 Way Actuation, High Pressure Working Temperature: Actuator: -20 C to +80 C (Dry Air) Valve: -20 C to +150 C Aluminum 0129 KBN17030 Type KBN10015 Type KBN10008 Type /2 5/2 NAMUR Mount Solenoid Top face air connection. Screwdriver manual override. Protection to IP 65. Cv Factor Double Acting, BSPP 0129 D400H003 3/ D400H004 1/ D400H005 3/ D400H D400H / D400H / D400H Working Temperature: Actuator: -20 C to +80 C (Dry Air) Valve: -20 C to +150 C Section 7 s 858 Single Acting, BSPP Valve & Coil R1518A 1/4 230/ R1519C 1/4 110/ R1520E 1/4 24/ R1521L 1/4 24V DC S400H003 3/ S400H004 1/ S400H005 3/ S400H S400H / S400H / S400H

66 Process Section 7 s Brass Ball, 3 Way L Port Actuation, Low Pressure Working Temperature: Actuator: -20 C to +120 C (Dry Air) Valve: -20 C to +150 C 856 Double Acting, BSPP 0129 D153H003 3/ D153H004 1/ D153H005 3/ D153H D153H / D153H / D153H Working Temperature: Actuator: -20 C to +120 C (Dry Air) Valve: -20 C to +150 C 860 PVC Ball, Actuation Note: The valve is suitable for fluids in the food, and chemicals industries. Working Temperature: Actuator: -20 C to +80 C (Dry Air) Valve: 0 C to +60 C 857 Double Acting, DN 0129 D613H083 DN D613H084 DN D613H085 DN D613H086 DN D613H087 DN D613H088 DN D613H089 DN D613H090 DN D613H091 DN D613H092 DN Note: The valve is suitable for fluids in the food, and chemicals industries. Working Temperature: Actuator: -20 C to +80 C (Dry Air) Valve: 0 C to +60 C 861 Single Acting, BSPP 0129 S153H003 3/ S153H004 1/ S153H005 3/ S153H S153H / S153H / S153H Single Acting, DN 0129 S613H083 DN S613H084 DN S613H085 DN S613H086 DN S613H087 DN S613H088 DN S613H089 DN S613H090 DN S613H091 DN S613H092 DN

67 Process Applications: Nitrile: Compatible with Air, Gas, Oils, Water etc. Viton: High compatibility with the majority of fluids, not advised for steam. Working Temperature: Nitrile: -20 C to +80 C Viton: -20 C to +150 C V.I.P. Axial Flow with Nitrile Seals 862 Note: The compact design of a VIP valve with it s reduced size and weight allows it to be used in applications, where traditional actuated valve packages can not be utilised. The VIP valve has no external moving parts, which ensures their operation is quick and efficient, with out the safety Issues of the traditional actuated valve packages. The VIP valve with the approved gas threaded connections (UN1-ISO 7/1-DIN 2999) coupled with a NAMUR mounting plate makes this valve suitable for every possible plant application. The valve can be mounted in any position. Full technical specifications available on request. V.I.P. Axial Flow with Viton Seals Angle Seat Valve with NAMUR Interface Available up to 2 - alternative terminations available. Temperature Range: -10 C to 180 C 121 BSPP 0129 Pressure Range: 0-16 bar (0-10 bar for Steam) Section 7 Double Acting, BSPP 0129 VDA / VDA / VDA / VDA VDA / VDA / VDA Single Acting Spring Return Normally Closed, BSPP 0129 VNC / VNC / VNC / VNC VNC / VNC / VNC Double Acting, BSPP 0129 VDA / VDA / VDA / VDA VDA / VDA / VDA Single Acting Spring Return Normally Closed, BSPP 0129 VNC / VNC / VNC / VNC VNC / VNC / VNC J4CPG1604 1/ J4CPG1605 3/ J4CPG Bronze Angle Seat Valve with NAMUR Interface Available up to 2 - alternative terminations available. -10 C to 180 C 121 BSPP 0129 IP65 Actuator Signal Box 637 Pressure Range: 0-16 bar (0-10 bar for Steam) J9CPG1603 3/ J9CPG1604 1/ J9CPG1605 3/ J9CPG s PFA502 Stem Size 20-30mm PFA503 Stem Size 50mm

68 Solenoid Section 7 s General Purpose 2/2 N/C Pilot Operated Solenoid Media: Water, Oil, Air Seal: NBR Speed Control Screw: Standard on 1.1/2 & 2 Body: Brass Protection Class: IP65 (with connector fitted) Media Temperature: -10 C to +90 C BSPP F /8 230/50 10VA F /8 110/50 10VA F /8 24DC 7W F /2 230/50 10VA F /2 110/50 10VA F /2 24DC 7W F /4 230/50 10VA F /4 110/50 10VA F /4 24DC 7W F /50 10VA F /50 10VA F DC 7W F /2 230/50 18VA F /2 110/50 18VA F /2 24DC 14W F /50 18VA F /50 18VA F DC 14W General Purpose 2/2 N/C Direct Acting Solenoid Media: Water, Oil, Air Seal: FKM Body: Brass Protection Class: IP65 (with connector fitted) Media Temperature: -10 C to +120 C BSPP F /8 230/50 10VA F /8 110/50 10VA F /8 24DC 7W F /4 230/50 18VA F /4 110/50 18VA F /4 24DC 14W F /8 230/50 18VA F /8 110/50 18VA F /8 24DC 14W General Purpose 2/2 N/O Pilot Operated Solenoid Media: Water, Oil, Air Seal: NBR Speed Control Screw: Standard on 1.1/2 & 2 Body: Brass Protection Class: IP65 (with connector fitted) Media Temperature: -10 C to +90 C BSPP F /8 230/50 10VA F /8 110/50 10VA F /8 24DC 7W F /2 230/50 10VA F /2 110/50 10VA F /2 24DC 7W F /4 230/50 10VA F /4 110/50 10VA F /4 24DC 7W F /50 10VA F /50 10VA F DC 7W F /2 230/50 18VA F /2 24DC 14W F /50 18VA F /50 18VA F DC 14W Steam/Water 2/2 N/C Pilot Operated Solenoid Media: Steam & Water Seal: EPDM (Main), PTFE (Diaphragm) Speed Control Screw: Standard on 1.1/2 & 2 Body: Brass ( Orifice) Protection Class: IP65 (with connector fitted) Media Temperature: -0 C to +150 C BSPP F /8 230/50 18VA F /8 110/50 18VA F /8 24DC 18W F /2 230/50 18VA F /2 110/50 18VA F /2 24DC 14W F /4 230/50 18VA F /4 110/50 18VA F /4 24DC 14W F /50 18VA F /50 18VA F DC 14W

69 Solenoid 2/2 N/C Direct Acting Solenoid Media: Aggressive Media Seal: FKM Body: Protection Class: IP65 (with connector fitted) 2/2 Way Pilot Operated Valve with Assisted Lift Media: Water, Oil, Air Note: Other voltages available on request Media Temperature: -10 C to +130 C Media Temperature: -10 C to +130 C Section 7 BSPP FSS /8 24DC 14W FSS /4 230/50 18VA FSS /4 110/50 18VA FSS /4 24DC 14W General Purpose 3/2 N/C Direct Acting Solenoid Media: Water, Oil, Air Seal: FKM Body: Brass Protection Class: IP65 (with connector fitted) BSPP Media Temperature: -10 C to +130 C F /8 230/50 18VA F /8 110/50 18VA F /8 24DC 14W F /4 230/50 18VA F /4 110/50 18VA F /4 24DC 14W Compact Version, BSPP D884DVU-230/50 1/4 230/50 18VA D884DVU-110/50 1/4 110/50 18VA D885DVU-230/50 3/8 230/50 18VA D885DVU-24 3/8 24DC 14W D886DVU-230/50 1/2 230/50 18VA D886DVU-110/50 1/2 110/50 18VA D886DVU-24 1/2 24DC 14W High Flow Version, BSPP D288DBW-230/50 3/8 230/50 18VA D288DBW-110/50 3/8 110/50 18VA D288DBW-24 3/8 24DC 14W D289BW-230/50 1/2 230/50 18VA D289BW-110/50 1/2 110/50 18VA D289BW-24 1/2 24DC 14W D290DBW-230/50 3/4 230/50 18VA D290DBW-110/50 3/4 110/50 18VA D290DBW-24 3/4 24DC 14W D293DBY-230/ /50 18VA D293DBY-110/ /50 18VA D293DBY DC 14W s 753

70 Solenoid Section 7 Steam 2/2 Way N/C Steam Pilot Operated Solenoid Ambient Temperature: -10 C to +70 C Media Temperature: -10 C to +180 C Page 974 2/2 Way N/C, BSPP s D634DTT24VAC 1/ D634DTT110VAC 1/ D634DTT240VAC 1/ D635DTT24VAC 3/ D635DTT110VAC 3/ D635DTT240VAC 3/ D636DTT24VAC 1/ D636DTT110VAC 1/ DIN Connectors DIN Connectors with RED indicating LED D636DTT240VAC 1/ D606DTY24VAC 3/ D606DTY110VAC 3/ D606DTY240VAC 3/ D622DTY24VAC D622DTY110VAC D622DTY240VAC Valve Coils Plug to Suit F133/F180/F280 (1/8-1 ) Plug to Suit FSS/F153/F180/F280/ F333 (1/8-2 ) LED Plug to Suit F133/F180/F280 (1/8-1 ) V - 50V V - 250V 9.20 LED Plug to Suit FSS/F153/F180/ F280/F333 (1/8-2 ) V - 50V V - 250V / / DC / / DC / / DC

71 Angle Seat Piston Angle Seat Piston mm actuator. Ambient Temperature: -10 C to +60 C Media Temperature: -10 C to +180 C Compact 45mm Actuator, 2 Way N/C, BSPP 45mm actuator. Ambient Temperature: -10 C to +60 C Media Temperature: -10 C to +180 C Compact 45mm Actuator, 2 Way N/O, BSPP Section 7 PG205CTW00 1/ PG206CTX00 3/ mm actuator. Ambient Temperature: -10 C to +60 C Media Temperature: -10 C to +180 C RPG205CTW00 1/ RPG206CTX00 3/ mm actuator. Ambient Temperature: -10 C to +60 C Media Temperature: -10 C to +180 C s 63mm Actuator, 2 Way N/C, BSPP 63mm Actuator, 2 Way N/O, BSPP PG205STW00 1/ PG206STX00 3/ PG207STY PG208STZ00 1.1/ PG209STK00 1.1/ PG210STJ RPG205STW00 1/ RPG206STX00 3/ RPG207STY RPG208STZ00 1.1/ RPG209STK00 1.1/ RPG210STJ For Fittings see pages

72 Angle Seat Piston Section 7 Bronze Angle Seat Piston 45mm actuator. Ambient Temperature: -10 C to +60 C Media Temperature: -10 C to +180 C 970 Compact 45mm Actuator, 2 Way N/C, BSPP CG205CTW00 1/ CG206CTX00 3/ CG207CTY mm actuator. Ambient Temperature: -10 C to +60 C Media Temperature: -10 C to +180 C mm actuator. Ambient Temperature: -10 C to +60 C Media Temperature: -10 C to +180 C 971 Compact 45mm Actuator, 2 Way N/O, BSPP RCG205CTW00 1/ RCG206CTX00 3/ RCG207CTY mm actuator. Ambient Temperature: -10 C to +60 C Media Temperature: -10 C to +180 C 971 s 63mm Actuator, 2 Way N/C, BSPP CG205STW00 1/ CG206STX00 3/ CG207STY CG208STZ00 1.1/ CG209STK00 1.1/ CG210STJ Pilot Operated Piston Ambient Temperature: -10 C to +80 C Media Temperature: -10 C to +90 C 973 Compact 2/2 Way N/C, BSPP BLG204DBW00 3/ BLG205DBW00 1/ mm Actuator, 2 Way N/O, BSPP RCG205STW00 1/ RCG206STX00 3/ RCG207STY RCG208STZ00 1.1/ RCG209STK00 1.1/ RCG210STJ Banjo Solenoid Suitable for use with M&M, CG, PG & BLG piston valves. Ambient Temperature: -10 C to +50 C Media Temperature: -10 C to +130 C 972 Direct Mount B356CVCMK24VDC 45 24V DC B356CVCMK24VAC 45 24V AC B356CVCMK110VAC V AC B356CVCMK240VAC V AC B326CVCMK24VDC 63 24V DC B326CVCMK24VAC 63 24V AC B326CVCMK110VAC V AC B326CVCMK240VAC V AC

73 Pressure Switches Direct Mount Pressure Switches Body: Brass Diaphragm: Silicone Rubber Damper Spring: Microswitch: 10amp 975 Direct Mount Vacuum Switches Body: Brass Diaphragm: Silicone Rubber Damper Spring: Microswitch: 10amp 977 Brass, Suitable for Water, Steam & Aggressive Media, BSPT 0061 XP73AE / ±0.1 ± XP73CE / ±0.1 ± XP73DE / ±0.1 ± XP73EE / ±0.1 ± Brass, Suitable for Pumped Water, Air & Low Pressure, BSPT 0061 GP73ME / ±0.1 ± GP73PE / ±0.1 ± Ideal for hot water, steam & semi-aggressive media. 976 Ambient Temperature: -10 C to +50 C Media Temperature: -10 C to +125 C, Suitable for Hot Water, Steam & Semi-agressive Media, BSPT Suitable for Vacuum, BSPT 0061 XV73VEN / ±50 ± XV73ZEN / ±50 ± Strainer for Condensate Drain Strainer consisting of a ball valve with filter to be used together with an automatic drain valve. In order to clean & check the filter it is sufficient to close the valve to isolate it & then unscrew the plug. Ambient Temperature: -10 C to +50 C Media Temperature: -10 C to +130 C 978 Section 7 s XP83FE / XP83GE / Pressure Switches Suitable for and Media Applications. These Pressure Switches are fitted with a high resistance NBR rubber diaphragm and are suitable for many applications, particularly for the control of pneumatic and hydraulic pressure. They are also suited to applications where a high number of repeatable operations is required. Wetted Parts: Body: Brass Diaphragm: NBR Rubber Damper Spring: Microswitch: 10 amp BSPP /2 1/ /8 1/ /4 1/ Male Thread, BSPP / / / For other pressure ranges and variations in materials, please contact our technical sales. For Galvanised Fittings see pages

74 Process Section 7 s Electrically Actuated, 2 Way Brass Ball Full technical specifications available on request. ISO 5211 Mounting Pad Note: The valve is suitable for non-aggressive fluids. i.e. oil, gas and light applications. Actuator and valve packages are available with integral fail-safe battery systems. IP67 Ingress Protection. ATEX Certification also available. 24V AC & 12V AC/DC available on request. Low Pressure, High Voltage, /50Hz, BSPP 0129 E100H003HV 3/ E100H004HV 1/ E100H005HV 3/ E100H006HV E100H007HV 1.1/ E100H008HV 1.1/ E100H009HV Low Pressure, Low Voltage, 24/50Hz - 24V DC, BSPP 0129 E100H003LV 3/ E100H004LV 1/ E100H005LV 3/ E100H006LV E100H007LV 1.1/ E100H008LV 1.1/ E100H009LV & 851 Working Temperature: Actuator: -10 C to +55 C Valve: -20 C to +150 C High Pressure, High Voltage, /50Hz, BSPP 0129 E101H003HV 3/ E101H004HV 1/ E101H005HV 3/ E101H006HV E101H007HV 1.1/ E101H008HV 1.1/ E101H009HV E101H010HV 2.1/ E101H011HV High Pressure, Low Voltage, 24/50Hz - 24V DC, BSPP 0129 E101H003LV 3/ E101H004LV 1/ E101H005LV 3/ E101H006LV E101H007LV 1.1/ E101H008LV 1.1/ E101H009LV E101H010LV 2.1/ E101H011LV Electrically Actuated, 3 Way L Ported Brass Ball Full technical specifications available on request. ISO 5211 Mounting Pad Note: The valve is suitable for non-aggressive fluids. i.e. oil, gas and light applications. Actuator and valve packages are available with integral fail-safe battery systems. IP67 Ingress Protection. ATEX Certification also available. 24V AC & 12V AC/DC available on request. 852 Working Temperature: Actuator: -10 C to +55 C Valve: -20 C to +150 C Low Pressure, High Voltage, /50Hz, BSPP 0129 E153H003HV 3/ E153H004HV 1/ E153H005HV 3/ E153H006HV E153H007HV 1.1/ E153H008HV 1.1/ E153H009HV Low Pressure, Low Voltage, 24/50Hz - 24V DC, BSPP 0129 E153H003LV 3/ E153H004LV 1/ E153H005LV 3/ E153H006LV E153H007LV 1.1/ E153H008LV 1.1/ E153H009LV

75 Actuated Page 836 Actuated Brass Ball Actuated ball valves suitable for use in Industrial,, Domestic and situations. Suitable media include Hot Water, Dry Steam, Gasoline, Unleaded Gasoline, Fuel, Gas-oil, Oils, Compressed Air. Not suitable for Methyl Alcohol and Saturated Steam. The actuator is attached securely to the ball valve, so as to provide trouble free operation. Please contact our Technical Department for larger sizes and plastic actuator options. Valve: 2 piece full bore ball valve, brass body and ball Seats: PTFE Stem Seal: Viton Threads: BS21 Female/ Female Working Temperature: -20 C to +60 C See below Actuated Ball Actuated stainless steel ball valves suitable for use in Industrial,, Domestic and situations. 3 piece full bore stainless steel ball valve. The actuator is attached securely to the ball valve via an ISO mounting pad. Size and material options available on request. Please contact our Technical Department for larger sizes and stainless steel actuator options. Valve: 3 piece full bore ball valve Seats: PTFE Body & Ball: ASTM A351-CF8M Threads: BS21 Female/ Female Application: Wet or Dry Media 1000 psi W.O.G. Section 7 Double Acting Actuation, BSPP DA-1/4E 1/4 Either DA-3/8E 3/8 Either DA-1/2E 1/2 Either DA-3/4E 3/4 Either DA-1E 1 Either DA-11/4E 1.1/4 Either DA-11/2E 1.1/2 Either DA-2E 2 Either DA-21/2E 2.1/2 Either DA-3E 3 Either DA-4E 4 Either Single Action Actuation, Spring Return, BSPP SA-1/4E 1/4 Either SA-3/8E 3/8 Either SA-1/2E 1/2 Either SA-3/4E 3/4 Either SA-1E 1 Either SA-11/4E 1.1/4 Either SA-11/2E 1.1/2 Either SA-2E 2 Either SA-21/2E 2.1/2 Either SA-3E 3 Either SA-4E 4 Either Double Acting Actuation, BSPP DA-1/4SS 1/4 Either DA-3/8SS 3/8 Either DA-1/2SS 1/2 Either DA-3/4SS 3/4 Either DA-1SS 1 Either DA-11/4SS 1.1/4 Either DA-11/2SS 1.1/2 Either DA-2SS 2 Either Single Acting Actuation, Spring Return, BSPP SA-1/4SS 1/4 Either SA-3/8SS 3/8 Either SA-1/2SS 1/2 Either SA-3/4SS 3/4 Either SA-1SS 1 Either SA-11/4SS 1.1/4 Either SA-11/2SS 1.1/2 Either SA-2SS 2 Either Actuator Switch Box Safe area options are available, please contact our technical department. Including Bracket SB-0001 DA-1/4E, DA-3/8E, DA-1/2E, DA-3/4E, DA-1E, DA-11/4E, SA-1/4E, SA-3/8E, SA-1/2E, SA-3/4E, SA-1E, SA-11/4E, DA-1/4SS, DA-3/8SS, DA-1/2SS, DA-3/4SS, SA-1/4SS, SA-3/4SS, SA-1/2SS SB-0002 All Others s 759

76 Actuated Section 7 Actuated Brass 3 Way Ball Seal: PTFE Stem Seal: Viton Threads: BSPP Working Temperature: -20 C to +120 C 1/4 to 3/4 PN30, 1 PN16, 1.1/4 to 2 PN10 Double Acting, L Ported, BSPP Actuated PVC 2 Way Seats: PTFE Seals: Viton 1/2 to 2 PN16, 2.1/2 to 4 PN10 Double Acting Actuation, BSPP Actuated Sanitary 2 Way Valve: 3 piece full bore ball valve, body, Cavity filled PTFE seals, OD Butt Weld Ends. Actuator: Rilsan Coated Aluminium Body, 1/4 BSP Female Ports. Actuator assembly based on 6 bar Pilot Air. Actuator. Other End Connections on Request: RJT, IDF, Clamp. s DA-1/4L 1/ DA-3/8L 3/ DA-1/2L 1/ DA-3/4L 3/ DA-1L DA-11/4L 1.1/ DA-11/2L 1.1/ DA-2L Double Acting, T Ported, BSPP DA-1/4T 1/ DA-3/8T 3/ DA-1/2T 1/ DA-3/4T 3/ DA-1T DA-11/4T 1.1/ DA-11/2T 1.1/ DA-2T Single Acting, L Ported, BSPP SA-1/4L 1/ SA-3/8L 3/ SA-1/2L 1/ SA-3/4L 3/ SA-1L SA-11/4L 1.1/ SA-11/2L 1.1/ SA-2L Single Acting, T Ported, BSPP SA-1/4T 1/ SA-3/8T 3/ SA-1/2T 1/ SA-3/4T 3/ SA-1T SA-11/4T 1.1/ SA-11/2T 1.1/ SA-2T DA-1/2PVC 1/ DA-3/4PVC 3/ DA-1PVC DA-11/4PVC 1.1/ DA-11/2PVC 1.1/ DA-2PVC DA-21/2PVC 2.1/ DA-3PVC DA-4PVC Single Acting Actuation, Spring Return, BSPP SA-1/2PVC 1/ SA-3/4PVC 3/ SA-1PVC SA-11/4PVC 1.1/ SA-11/2PVC 1.1/ SA-2PVC SA-21/2PVC 2.1/ SA-3PVC SA-4PVC For Threaded PVC Elbows see page 803 Double Acting Actuation DA-1/2SSOD 1/ DA-3/4SSOD 3/ DA-1SSOD DA-11/2SSOD 1.1/ DA-2SSOD DA-3SSOD DA-4SSOD Single Acting Actuation SA-1/2SSOD 1/ SA-3/4SSOD 3/ SA-1SSOD SA-11/2SSOD 1.1/ SA-2SSOD SA-3SSOD SA-4SSOD

77 Actuated Actuated 3 Way Seats: PTFE Seals: PTFE Threads: BSPP 1000 psi W.O.G. Double Acting, L Ported, BSPP DA-1/4LSS 1/ DA-3/8LSS 3/ DA-1/2LSS 1/ DA-3/4LSS 3/ DA-1LSS DA-11/4LSS 1.1/ DA-11/2LSS 1.1/ DA-2LSS Double Acting, T Ported, BSPP Actuated 2 Piece, 2 Way Ball Valve: 2 piece full bore ball valve, stainless steel body BSP female threads. Actuator: Rilsan coated aluminium body, 1/4 BSP female ports. Suitable Media: Hot Water, Gasoline, Unleaded Gasoline, Fuel, Gas-Oil, Oils, Compressed Air. Not suitable for methyl alcohol & saturated steam. Actuator assembly based on 6 bar pilot air. Other end connections on request: Socket Weld, Butt Weld, NPT. Actuator available on request. Working Temperature: -20 C to +80 C Double Acting Actuation, BSPP Actuated High Pressure Seats: PTFE/PVDF Seals: RTFE Threads: BSPP (others available on request) 6000 psi/408 bar Double Acting Actuation, BSPP DA-1/4SSHP 1/ DA-3/8SSHP 3/ DA-1/2SSHP 1/ DA-3/4SSHP 3/ DA-1SSHP Single Acting Actuation, Spring Return, BSPP Section 7 s DA-1/4TSS 1/ DA-3/8TSS 3/ DA-1/2TSS 1/ DA-3/4TSS 3/ DA-1TSS DA-11/4TSS 1.1/ DA-11/2TSS 1.1/ DA-2TSS Single Acting, L Ported, BSPP DA-1/4SS2 1/ DA-3/8SS2 3/ DA-1/2SS2 1/ DA-3/4SS2 3/ DA-1SS DA-11/4SS2 1.1/ DA-11/2SS2 1.1/ DA-2SS Single Acting Actuation, BSPP SA-1/4SSHP 1/ SA-3/8SSHP 3/ SA-1/2SSHP 1/ SA-3/4SSHP 3/ SA-1SSHP SA-1/4LSS 1/ SA-3/8LSS 3/ SA-1/2LSS 1/ SA-3/4LSS 3/ SA-1LSS SA-11/4LSS 1.1/ SA-11/2LSS 1.1/ SA-2LSS Single Acting, T Ported, BSPP SA-1/4TSS 1/ SA-3/8TSS 3/ SA-1/2TSS 1/ SA-3/4TSS 3/ SA-1TSS SA-11/4TSS 1.1/ SA-11/2TSS 1.1/ SA-2TSS SA-1/4SS2 1/ SA-3/8SS2 3/ SA-1/2SS2 1/ SA-3/4SS2 3/ SA-1SS SA-11/4SS2 1.1/ SA-11/2SS2 1.1/ SA-2SS For ISO 5211 Ball Valve see page

78 Butterfly Wafer Pattern Cast Body, Ductile Disc, EPDM Liner Suitable for Flanges: BS10 Table E, PN10/16, ANSI C to +130 C Suitable for Flanges: BS10 Table E, PN10/16, ANSI C to +130 C Electric Actuator Safe Area V AC or DC single Phase (10 and V AC Only). Suitable for Flanges: PN16 (ANSI150 on request). Battery Backup Failsafe and Modulating (4-20mA or 0-10V) on request. ATEX Approved Actuator on request. Section 7 s Lever Operated Gear Operated 14 LEVER/50DIEP LEVER/65DIEP 2.1/ LEVER/80DIEP LEVER/100DIEP LEVER/125DIEP LEVER/150DIEP LEVER/200DIEP LEVER/250DIEP Suitable for Flanges: BS10 Table E, PN10/16, ANSI C to +130 C 14 GEAR/50DIEP GEAR/65DIEP 2.1/ GEAR/80DIEP GEAR/100DIEP GEAR/125DIEP GEAR/150DIEP GEAR/200DIEP GEAR/250DIEP GEAR/300DIEP Single Acting 15 SA/50DIEP SA/65DIEP 2.1/ SA/80DIEP SA/100DIEP SA/125DIEP SA/150DIEP SA/200DIEP SA/250DIEP SA/300DIEP Actuator: Rilsan Coated Aluminium Body, 1/4 BSP Female Ports. Suitable for Flanges: BS10 Table E, PN10/16, Double Acting -30 C to +130 C 16 ANSI150. Actuator assembly based on 6 bar Pilot Air. DA/50DIEP DA/65DIEP 2.1/ DA/80DIEP DA/100DIEP DA/125DIEP DA/150DIEP DA/200DIEP DA/250DIEP DA/300DIEP For Ball see page C to +130 C Electric Actuated, High Voltage 17 E/50DIEP-HV E/65DIEP-HV 2.1/ E/80DIEP-HV E/100DIEP-HV E/125DIEP-HV E/150DIEP-HV E/200DIEP-HV E/250DIEP-HV E/300DIEP-HV Suitable for Flanges: BS10 Table E, PN10/16, ANSI150. Electric Actuated, Low Voltage -30 C to +130 C 17 E/50DIEP-LV E/65DIEP-LV 2.1/ E/80DIEP-LV E/100DIEP-LV E/125DIEP-LV E/150DIEP-LV E/200DIEP-LV

79 Butterfly Wafer Pattern Cast Body, Disc, EPDM Liner Suitable for Flanges: BS10 Table E, PN10/16, ANSI C to +130 C Suitable for Flanges: BS10 Table E, PN10/16, ANSI C to +130 C Electric Actuator Safe Area V AC or DC single Phase (10 and V AC Only). Suitable for Flanges: PN16 (ANSI150 on request). Battery Backup Failsafe and Modulating (4-20mA or 0-10V) on request. ATEX Approved Actuator on request C to +130 C 17 Section 7 Lever Operated Single Acting Electric Actuated, High Voltage LEVER/40SSEP 1.1/ LEVER/50SSEP LEVER/65SSEP 2.1/ LEVER/80SSEP LEVER/100SSEP LEVER/125SSEP LEVER/150SSEP LEVER/200SSEP LEVER/250SSEP Suitable for Flanges: BS10 Table E, PN10/16, ANSI150. Gear Operated -30 C to +130 C 14 GEAR/50SSEP GEAR/65SSEP 2.1/ GEAR/80SSEP GEAR/100SSEP GEAR/125SSEP GEAR/150SSEP GEAR/200SSEP GEAR/250SSEP GEAR/300SSEP GEAR/350SSEP GEAR/400SSEP SA/50SSEP SA/65SSEP 2.1/ SA/80SSEP SA/100SSEP SA/125SSEP SA/150SSEP SA/200SSEP SA/250SSEP SA/300SSEP Suitable for Flanges: BS10 Table E, PN10/16, ANSI150. Double Acting -30 C to +130 C 16 DA/50SSEP DA/65SSEP 2.1/ DA/80SSEP DA/100SSEP DA/125SSEP DA/150SSEP DA/200SSEP DA/250SSEP DA/300SSEP For Galvanised Tubing see page 1071 E/50SSEP-HV E/65SSEP-HV 2.1/ E/80SSEP-HV E/100SSEP-HV E/125SSEP-HV E/150SSEP-HV E/200SSEP-HV E/250SSEP-HV E/300SSEP-HV Suitable for Flanges: BS10 Table E, PN10/16, ANSI150. Electric Actuated, Low Voltage -30 C to +130 C 17 E/50SSEP-LV E/65SSEP-LV 2.1/ E/80SSEP-LV E/100SSEP-LV E/125SSEP-LV E/150SSEP-LV E/200SSEP-LV s 763

80 Butterfly Wafer Pattern Section 7 s Cast Body, Disc, PTFE on EPDM Liner Suitable for Flanges: BS10 Table E, PN10/16, ANSI C to +104 C Lever Operated 14 LEVER/50SSPT LEVER/65SSPT 2.1/ LEVER/80SSPT LEVER/100SSPT LEVER/125SSPT Suitable for Flanges: BS10 Table E, PN10/16, ANSI C to +104 C Gear Operated 14 GEAR/50SSPT GEAR/65SSPT 2.1/ GEAR/80SSPT GEAR/100SSPT GEAR/125SSPT GEAR/150SSPT GEAR/200SSPT GEAR/250SSPT GEAR/300SSPT Suitable for Flanges: BS10 Table E, PN10/16, ANSI C to +104 C Single Acting 15 SA/50SSPT SA/65SSPT 2.1/ SA/80SSPT SA/100SSPT SA/125SSPT SA/150SSPT SA/200SSPT SA/250SSPT SA/300SSPT Actuator: Rilsan Coated Aluminium Body, 1/4 BSP Female Ports. Suitable for Flanges: BS10 Table E, PN10/16, -18 C to +104 C Double Acting ANSI150. Actuator assembly based on 6 bar Pilot Air. 16 DA/50SSPT DA/65SSPT 2.1/ DA/80SSPT DA/100SSPT DA/125SSPT DA/150SSPT DA/200SSPT DA/250SSPT DA/300SSPT For Carbon Flanges see page 1079 Electric Actuator Safe Area V AC or DC single Phase (10 and V AC Only). Suitable for Flanges: PN10/16, ANSI150 & BS10 Table E. Battery Backup Failsafe and Modulating (4-20mA or 0-10V) on request. ATEX Approved Actuator on request. Electric Actuated, High Voltage 17 E/50SSPT-HV E/65SSPT-HV 2.1/ E/80SSPT-HV E/100SSPT-HV E/125SSPT-HV E/150SSPT-HV E/200SSPT-HV E/250SSPT-HV Electric Actuated, Low Voltage -18 C to +104 C Suitable for Flanges: BS10 Table E, PN10/16, ANSI C to +104 C 17 E/50SSPT-LV E/65SSPT-LV 2.1/ E/80SSPT-LV E/100SSPT-LV E/125SSPT-LV

81 Butterfly Wafer Pattern Cast Body, Disc, NBR Liner Suitable for Flanges: BS10 Table E, PN10/16, ANSI C to +80 C Suitable for Flanges: BS10 Table E, PN10/16, ANSI150. Temperature Range: -12 C to +80 C Electric Actuator Safe Area V AC or DC single Phase (10 and V AC Only). Suitable for Flanges: PN16 (ANSI150 on request). Battery Backup Failsafe and Modulating (4-20mA or 0-10V) on request. ATEX Approved Actuator on request. Lever Operated 14 LEVER/40SSNBR 1.1/ LEVER/50SSNBR LEVER/65SSNBR 2.1/ LEVER/80SSNBR LEVER/100SSNBR LEVER/125SSNBR LEVER/150SSNBR LEVER/200SSNBR LEVER/250SSNBR Suitable for Flanges: BS10 Table E, PN10/16, ANSI C to +80 C Single Acting SA/50SSNBR SA/65SSNBR 2.1/ SA/80SSNBR SA/100SSNBR SA/125SSNBR SA/150SSNBR SA/200SSNBR SA/250SSNBR SA/300SSNBR Suitable for Flanges: BS10 Table E, PN10/16, ANSI C to +80 C Double Acting DA/50SSNBR DA/65SSNBR 2.1/ DA/80SSNBR DA/100SSNBR DA/125SSNBR DA/150SSNBR DA/200SSNBR DA/250SSNBR DA/300SSNBR C to +80 C Electric Actuated, High Voltage 17 E/50SSNBR-HV E/65SSNBR-HV 2.1/ E/80SSNBR-HV E/100SSNBR-HV E/125SSNBR-HV E/150SSNBR-HV E/200SSNBR-HV E/250SSNBR-HV E/300SSNBR-HV Electric Actuator Safe Area 12-24V AC or DC single Phase (10 and 12 24V AC/DC Only). Suitable for Flanges: PN16 (ANSI150 on request). Battery Backup Failsafe and Modulating (4-20mA or 0-10V) on request. ATEX Approved Actuator on request. Electric Actuated, Low Voltage -12 C to +80 C 17 Section 7 s Gear Operated 14 GEAR/50SSNBR GEAR/65SSNBR 2.1/ GEAR/80SSNBR GEAR/100SSNBR GEAR/125SSNBR GEAR/150SSNBR GEAR/200SSNBR GEAR/250SSNBR GEAR/300SSNBR GEAR/350SSNBR GEAR/400SSNBR For KELM Air Preparation see pages E/50SSNBR-LV E/65SSNBR-LV 2.1/ E/80SSNBR-LV E/100SSNBR-LV E/125SSNBR-LV E/150SSNBR-LV E/200SSNBR-LV

82 Butterfly Wafer Pattern Cast Body, Disc, Silicon Liner Suitable for Flanges: BS10 Table E, PN10/16, ANSI C to +200 C Suitable for Flanges: BS10 Table E, PN10/16, ANSI C to +200 C Electric Actuator Safe Area V AC or DC single Phase (10 and V AC Only). Suitable for Flanges: PN10/16, ANSI150 & BS10 Table E. Battery Backup Failsafe and Modulating (4-20mA or 0-10V) on request. ATEX Approved Actuator on request. Section 7 s Lever Operated 14 LEVER/50SSSIL LEVER/65SSSIL 2.1/ LEVER/80SSSIL LEVER/100SSSIL LEVER/125SSSIL LEVER/150SSSIL LEVER/200SSSIL LEVER/250SSSIL Suitable for Flanges: BS10 Table E, PN10/16, ANSI150. Gear Operated -40 C to +200 C 14 GEAR/50SSSIL GEAR/65SSSIL 2.1/ GEAR/80SSSIL GEAR/100SSSIL GEAR/125SSSIL GEAR/150SSSIL GEAR/200SSSIL GEAR/250SSSIL GEAR/300SSSIL Single Acting 15 SA/50SSSIL SA/65SSSIL 2.1/ SA/80SSSIL SA/100SSSIL SA/125SSSIL SA/150SSSIL SA/200SSSIL SA/250SSSIL SA/300SSSIL Actuator: Rilsan Coated Aluminium Body, 1/4 BSP Female Ports. Suitable for Flanges: Double Acting -40 C to +200 C 16 BS10 Table E, PN10/16, ANSI150 Actuator assembly based on 6 bar Pilot Air. DA/50SSSIL DA/65SSSIL 2.1/ DA/80SSSIL DA/100SSSIL DA/125SSSIL DA/150SSSIL DA/200SSSIL DA/250SSSIL DA/300SSSIL For Plastic Hose Reels see page C to +200 C Electric Actuated, High Voltage 17 E/50SSSIL-HV E/65SSSIL-HV 2.1/ E/80SSSIL-HV E/100SSSIL-HV E/125SSSIL-HV E/150SSSIL-HV E/200SSSIL-HV E/250SSSIL-HV Suitable for Flanges: BS10 Table E, PN10/16, ANSI150. Electric Actuated, Low Voltage -40 C to +200 C 17 E/50SSSIL-LV E/65SSSIL-LV 2.1/ E/80SSSIL-LV E/100SSSIL-LV E/125SSSIL-LV E/150SSSIL-LV E/200SSSIL-LV

83 Butterfly Wafer Pattern Cast Body Disc, EPDM Liner Suitable for Flanges: PN16 (ANSI150 on request). Gear box on request. -30 C to +130 C Actuator: Rilsan Coated Aluminium Body, 1/4 BSP Female Ports. Suitable for Flanges: PN16 (ANSI150 on request). Actuator assembly based on 6 bar Pilot Air. Electric Actuator Safe Area V AC or DC single Phase (10 and V AC Only). Suitable for Flanges: PN16 (ANSI150 on request). Battery Backup Failsafe and Modulating (4-20mA or 0-10V) on request. ATEX Approved Actuator on request. -30 C to +130 C -30 C to +130 C Section Lever Operated L/LEVER/40SSEP 1.1/ L/LEVER/50SSEP L/LEVER/65SSEP 2.1/ L/LEVER/80SSEP L/LEVER/100SSEP L/LEVER/125SSEP L/LEVER/150SSEP L/LEVER/200SSEP L/LEVER/250SSEP For Layflat Delivery Hose see page 1156 Single Acting L/SA/50SSEP L/SA/65SSEP 2.1/ L/SA/80SSEP L/SA/100SSEP L/SA/125SSEP L/SA/150SSEP L/SA/200SSEP L/SA/250SSEP L/SA/300SSEP Actuator: Rilsan Coated Aluminium Body, 1/4 BSP Female Ports. Suitable for Flanges: PN16 (ANSI150 on request). Double Acting -30 C to +130 C Actuator assembly based on 6 bar Pilot Air. 16 L/DA/50SSEP L/DA/65SSEP 2.1/ L/DA/80SSEP L/DA/100SSEP L/DA/125SSEP L/DA/150SSEP L/DA/200SSEP L/DA/250SSEP L/DA/300SSEP Electric Actuated, High Voltage L/E/50SSEP-HV L/E/65SSEP-HV 2.1/ L/E/80SSEP-HV L/E/100SSEP-HV L/E/125SSEP-HV L/E/150SSEP-HV L/E/200SSEP-HV L/E/250SSEP-HV L/E/300SSEP-HV Electric Actuator Safe Area 12-24V AC or DC single Phase (10 and 12 24V AC/DC Only). Suitable for Flanges: PN16 (ANSI150 on request). Actuator assembly based on 6 bar Pilot Air. Battery Backup Failsafe and Modulating (4-20mA or 0-10V) on request. ATEX Approved Actuator on request. Electric Actuated, Low Voltage -30 C to +130 C 17 L/E/50SSEP-LV L/E/65SSEP-LV 2.1/ L/E/80SSEP-LV L/E/100SSEP-LV L/E/125SSEP-LV L/E/150SSEP-LV L/E/200SSEP-LV s 767

84 Butterfly Wafer Pattern Cast Body Disc, NBR Liner Section 7 Cast Body, Disc, NBR Liner Suitable for Flanges: -12 C to +80 C BS10 Table E, PN10/16, ANSI150. Gear box on request. Actuator: Rilsan Coated Aluminium Body, 1/4 BSP Female Ports. Suitable for Flanges: -12 C to +80 C PN16 (ANSI150 on request). Actuator assembly based on 6 bar Pilot Air. Electric Actuator Safe Area V AC or DC single Phase (10 and V AC Only). Suitable for Flanges: PN16 (ANSI150 on request). -12 C to +80 C Battery Backup Failsafe and Modulating (4-20mA or 0-10V) on request. ATEX Approved Actuator on request Lever Operated Single Acting Electric Actuated, High Voltage s L/LEVER/40SSNBR 1.1/ L/LEVER/50SSNBR L/LEVER/65SSNBR 2.1/ L/LEVER/80SSNBR L/LEVER/100SSNBR L/LEVER/125SSNBR L/LEVER/150SSNBR L/LEVER/200SSNBR L/LEVER/250SSNBR L/SA/50SSNBR L/SA/65SSNBR 2.1/ L/SA/80SSNBR L/SA/100SSNBR L/SA/125SSNBR L/SA/150SSNBR L/SA/200SSNBR L/SA/250SSNBR L/SA/300SSNBR L/E/50SSNBR-HV L/E/65SSNBR-HV 2.1/ L/E/80SSNBR-HV L/E/100SSNBR-HV L/E/125SSNBR-HV L/E/150SSNBR-HV L/E/200SSNBR-HV L/E/250SSNBR-HV L/E/300SSNBR-HV For 1620 Test Point Kits see page 155 Actuator: Rilsan Coated Aluminium Body, 1/4 BSP Female Ports. Suitable for Flanges: Double Acting -12 C to +80 C PN16 (ANSI150 on request). Actuator assembly based on 6 bar Pilot Air. 16 Electric Actuator Safe Area 12-24V AC or DC single Phase (10 and 12 24V AC/DC Only). Suitable for Flanges: PN16 (ANSI150 on request). -12 C to +80 C Battery Backup Failsafe and Modulating (4-20mA or 0-10V) on request. ATEX Approved Actuator on request. Electric Actuated, Low Voltage 17 L/DA/50SSNBR L/DA/65SSNBR 2.1/ L/DA/80SSNBR L/DA/100SSNBR L/DA/125SSNBR L/DA/150SSNBR L/DA/200SSNBR L/DA/250SSNBR L/DA/300SSNBR L/E/50SSNBR-LV L/E/65SSNBR-LV 2.1/ L/E/80SSNBR-LV L/E/100SSNBR-LV L/E/125SSNBR-LV L/E/150SSNBR-LV L/E/200SSNBR-LV

85 Unidirectional Knife Gate Page Manual Handwheel Knife Gate Technical Data: Designed to handle water & abrasive slurries. Suitable for industries such as: Mining, power, chemical & waste water treatment plants. Connectons are PN10 flanges. Please contact our technical department if you require other options. Maximum 2 to 10 = 10 bar 12 = 6 bar Double Acting Knife Gate Technical Data: Designed to handle water & abrasive slurries. Suitable for industries such as: Mining, power, chemical & waste water treatment plants. Connections are PN10 flanges. Please contact our technical department if you require other options. Maximum Working Pressure: 2 to 10 = 10 bar 12 = 6 bar Section 7 Cast Body KGVCIM KGVCIM KGVCIM KGVCIM KGVCIM KGVCIM KGVCIM KGVCIM KGVCIM Cast Body KGVCIP KGVCIP KGVCIP KGVCIP KGVCIP KGVCIP KGVCIP KGVCIP KGVCIP s The Full Performance Compressed Air Pipe System For AIRpipe Ringmain System see pages