Valves. Associated Products ,

Transcription

1 9 Ball Ball & Strainers Non-return Safety Safety Excess Flow (Air Fuse) Solenoid Solenoid Coils , Electrical Socket Connectors M8 Electrical Cables Actuated Ball Wafer Butterfly Actuated Butterfly Angle Seat Actuated Slide Associated Products Push-in FIttings Flanges Red Oxide Steel Tube PVC Hose

2 9 Ball Steel handle Maximum Working Temperature: 220 C (AIR) Minimum Working Temperature: -15 C (AIR) Suitable for Industrial, Pneumatic, Domestic and Hydraulic Installations: Hot Water, Gasoline, Fuel, Oils, Gas-Oil, Kerosene, Gas, Acids, Compressed Air, Etc. Full Flow Lever Ball Valve Female x Female N27 Length BV14FF G1/ BV38FF G3/ BV12FF G1/ BV34FF G3/ BV1FF G Full Flow Ball Valve Female x Female N27 Length BV14FF-S G1/ BV38FF-S G3/ BV12FF-S G1/ BV34FF-S G3/ BV1FF-S G BV114FF-S G1.1/ BV112FF-S G1.1/ BV2FF-S G Steel handle BV114FF G1.1/ BV112FF G1.1/ BV2FF G BV212FF G2.1/ BV3FF G Long Full Ball Valve Female x Female BV4FF G N27 Length ISOLTDBV12FF G1/ Full Flow Ball Valve Male x Female N27 Length BV12MF G1/ ISOLTDBV34FF G3/ ISOLTDBV1FF G ISOLTDBV114FF G1.1/ ISOLTDBV112FF G1.1/ ISOLTDBV2FF G UNI EN 331 BV34MF G3/ BV1MF G BV114MF G1.1/ BV112MF G1.1/ Full Flow Ball Valve for Gas Female x Female BV2MF G N28 Length GBV14FF G1/ GBV38FF G3/ GBV12FF G1/ GBV34FF G3/ GBV1FF G GBV114FF G1.1/ GBV112FF G1.1/ GBV2FF G

3 Ball 9 UNI EN 331 Full Flow Ball Valve for Gas Male x Female N28 Length GBV14MF G1/ GBV38MF G3/ GBV12MF G1/ GBV34MF G3/ GBV1MF G GBV114MF G1.1/ GBV112MF G1.1/ GBV2MF G Full Flow Lever Ball Valve, Vented Female x Female P23 BV14FFV G1/ BV38FFV G3/ BV12FFV G1/ BV34FFV G3/ BV1FFV G T Handle Gas Ball Valve Female x Female N28 GBVT12FF G1/ GBVT34FF G3/ GBVT1FF G T Handle Gas Ball Valve Male x Female N28 GBVT12MF G1/ GBVT34MF G3/ GBVT1MF G Way L Port Ball Valve Female x Female 3 Way T Port Ball Valve Female x Female N28 Length BV3L14 G1/ BV3L38 G3/ BV3L12 G1/ BV3L34 G3/ BV3L1 G BV3L114 G1.1/ BV3L112 G1.1/ BV3L2 G N28 Length BV3T14 G1/ BV3T38 G3/ BV3T12 G1/ BV3T34 G3/ BV3T1 G BV3T114 G1 1/ BV3T112 G1 1/ BV3T2 G

4 9 Ball High quality 2 piece full bore ball valve with full thread, degreased for oxygen. supplied individually bagged and heat sealed. Body: Nickel Plated Brass/Handle Aluminium Ball: Chromed Brass Seals: PTFE Stem Seal: NBR Full Bore ISO 5211 Direct Mount Working Temperature: -20 C to +95 C Maximum Working Pressure: 40 bar Temperature Range: -20 C to +80 C Degreased Ball Valve, Brass Female x Female, BSPT P55 BSPT BV14FF-DG R1/ BV38FF-DG R3/ BV12FF-DG R1/ BV34FF-DG R3/ BV1FF-DG R BV1.1/4FF-DG R1.1/ BV1.1/2FF-DG R1.1/ ISO 5211 Pad, WRAS Approved Female x Female, P55 BV12FF-ISOP G1/ BV34FF-ISOP G3/ BV1FF-ISOP G BV1.1/4FF-ISOP G1.1/ BV1.1/2FF-ISOP G1.1/ BV2FF-ISOP G BV2.1/2IFF SOP G2.1/ BV2FF-DG R BV2.1/2FF-DG R2.1/ BV3FF-DG R BV4FF-DG R

5 Ball 9 T Handle Full Flow Ball Valve Female x Female T Handle Full Flow Ball Valve Male x Female N27 Length N27 Length BVT14FF G1/ BVT38FF G3/ BVT12FF G1/ BVT34FF G3/ BVT1FF G BVT14MF G1/ BVT38MF G3/ BVT12MF G1/ BVT34MF G3/ BVT1MF G Full Flow Lever Ball Valve, Lockable Female x Female P24 Mini Ball Valve Female x Female N BV14FFL G1/ BV38FFL G3/ BV12FFL G1/ BV34FFL G3/ BV1FFL G MBV1FF G1/ MBV2FF G1/ MBV3FF G3/ MBV4FF G1/ MBV5FF G3/ Technical Specifications Carbon steel WCB (investment casting) Ball and stem: Stainless steel 316 Gas thread DIN Seats: PTFE + 15% GF wog. Temperature: -25 C C. Manually operated by handle with locking system 3 Piece Carbon Steel Ball Valve Female x Female Mini Ball Valve Male x Female N MBV1MF G1/ MBV2MF G1/ MBV3MF G3/ MBV4MF G1/ MBV5MF G3/ N06 Weight kg CSBV12FF G1/2 0, CSBV34FF G3/4 0, CSBV1FF G1 0, CSBV114FF G1.1/4 1, CSBV112FF G1.1/2 2, CSBV2FF G2 3,

6 9 Ball Temperature Range Fluids: -20 C to +150 C Gas: -20 C to +60 C Lockable, Gas Full Bore Valve P55 L BGLFB-1 G BGLFB-11.1/2 G1.1/ BGLFB-1 G H Working Pressure 25 bar (at 25ºC) L Manufactured in accordance to EN331 s to EN , ISO 228 parallel female threads Full port to DIN 3357 for maximum flow PED 97/23 CE Quality: 24h 100% seal test guaranteed Dual sealing system allows valve to be operated in either direction, making installation easier No metal to metal moving parts Clear handle markings showing position of valve Silicone-free lubricant on all seals Blowout proof nickel-plated brass stem Two FPM o-rings at the stem for maximum safety Pure PTFE self-lubricating seals with flexible lip design Approvals: WRAS BSI RoHS Compliant DIN-DVGW Working Temperature: -40 C to +170 C AS4617 Limitations for GAS: 0 C to +60 C Maximum Working Pressure: 40 bar up to 2 30 bar over 2 AS4617 Limitations for GAS: 2100Kpa up to 2 150Kpa from 2.1/2 to 4 Complete with 2 keys Lockable, Gas Full Bore Valve Type BV76, Female x Female, Locking, P55 L H BGLOCKBV-12 G1/ BGLOCKBV-34 G3/ BGLOCKBV-1 G L Dual Sealing WRAS/Gas Approved Ball Valve P55 BVWRGA-1/4 G1/ BVWRGA-3/8 G3/ BVWRGA-1/2 G1/ BVWRGA-3/4 G3/ BVWRGA-1 G BVWRGA-1.1/4 G1.1/ BVWRGA-1.1/2 G1.1/ BVWRGA-2 G BVWRGA-2.1/2 G2.1/ BVWRGA-3 G BVWRGA-4 G

7 Ball & Strainers 9 Gate Valve Brass Technical Specifications Working Temperature: C (Air) 0-90 C (Water) Mesh Size: 400 Micron (up to 1 ) 470 Micron (1.1/4 to 2 ) 530 Micron (2.1/2 to 4 ) N56 Length GV38B G3/ GV12B G1/ GV34B G3/ GV1B G GV114B G1.1/ GV112B G1.1/ GV2B G GV212B G2.1/ GV3B G GV4B G Y Strainer Brass N58 YS38B G3/ YS12B G1/ YS34B G3/ YS1B G YS114B G1.1/ YS112B G1.1/ YS2B G YS212B G2.1/ YS3B G Working Temperature: C (Air) C (Water) YS4B G Heavy Duty Gate Valve Gun Metal N56 Length GV38GM G3/ Y Strainer Nickel Plated Brass N59 Female Ports YS12BN G1/ YS34BN G3/ YS1BN G GV12GM G1/ GV34GM G3/ GV1GM G YS114BN G1.1/ YS112BN G1.1/ YS2BN G GV114GM G1.1/ GV112GM G1.1/ GV2GM G GV212GM G2.1/ GV3GM G GV4GM G

8 9 Temperature Range: -20 C to +100 C Temperature Range: 0 C to +100 C Working Pressure: 290 psi Gate Valve - Heavy Duty Type GV157, Brass, P56 HDGV-38 G3/ HDGV-12 G1/ HDGV-34 G3/ HDGV-1 G HDGV-114 G1.1/ HDGV-112 G1.1/ HDGV-2 G HDGV-212 G2.1/ HDGV-3 G Needle Valve, Brass Female x Female, P56 NVB18-FF G1/ NVB14-FF G1/ NVB38-FF G3/ NVB12-FF G1/ Working Pressure: 100 bar NPT Full Way Ball Valve, Brass, Unplated Type BV50, Female x Female, Lever Handle, NPT P56 NPT BV12FFNPT 1/ BV34FFNPT 3/ Complete with 2 keys Full Flow Locking Ball Valve Type BV77, Female x Female, SV73 is manufactured in accordance with BS5154/B - PN20 PTFE Disc Cold Service: 20 bar at -10 to 100 C Saturated Steam: 9 bar at 180 C. Needle Valve, Brass Male x Male, BSPT P56 KEYBV-12 G1/ KEYBV-34 G3/ KEYBV-1 G P56 BSPT NVB18-MM R1/ NVB14-MM R1/ Bronze Oblique Seating Stop Valve Type SV73, Female x Female, NVB38-MM R3/ NVB12-MM R1/ High Pressure 2 Way Valve, Brass Type BV210, Female x Female, P56 ANGSV-12 G1/ ANGSV-34 G3/ ANGSV-1 G P56 HPTV-38 G3/ HPTV-12 G1/ HPTV-34 G3/ ANGSV-2 G HPTV-1 G

9 9 Body: Polypropylene with NBR Seal Operating Pressure: 3.5 bar Body: Polypropylene with NBR Seal Operating Pressure: 3.5 bar Suitable for use in the food industry FOOD GRADE Plastic Ball Valve Hose Tail x Hose Tail Plastic Ball Valve Hose Tail x Male Plastic Push-in BSPT Male x Tube S34 Hose ID PBVHT S34 Hose ID PBVMPHT-12-1/2 12 1/ S34 Tube OD BSPT PBVTMT-6-1/4 6 1/ PBVHT PBVMPHT-12-3/4 12 3/ PBVTMT-10-3/8 10 3/ PBVHT PBVMPHT-16-1/2 16 1/ PBVTMT-12-1/2 12 1/ PBVMPHT-16-3/4 16 3/ PBVMPHT-20-1/2 20 1/ PBVMPHT-20-3/4 20 3/ Suitable for use in the food industry Temperature Range: 30 C to 85 C Maximum Pressure: 11 bar Plastic Ball Valve Male x Male Suitable for use in the food industry FOOD GRADE S34 PBVMP-1/2 1/ PBVMP-1/2-3/4 1/2 x 3/ PBVMP-3/4 3/ FOOD GRADE Plastic Push-in Female 90º Plastic Push-in Tube x Tube S34 Tube OD PBV90-6-1/4 6 1/ Plastic Ball Valve Hose Tail x Female S34 Hose ID PBVFHT-16-1/2 16 1/ PBVFHT-16-3/4 16 3/ PBVFHT-20-1/2 20 1/ PBVFHT-20-3/4 20 3/ S34 Tube OD PBVTT PBVTT PBVTT PBV /8 10 3/ PBV /2 12 1/ FOOD GRADE Plastic Push-in In-line Mini Filter S34 Tube OD PMFIL PMFIL PMFIL PMFIL

10 9 Non-return Working Temperature: C (Air) 0-90 C (Water) C (Gas) Working Temperature: C (Air) 0-90 C (Water) C (Gas) Brass Check Valve with Metal Disc Female x Female N57 100CV38 G3/ CV12 G1/ CV34 G3/ CV1 G CV114 G1.1/ CV112 G1.1/ CV2 G CV212 G2.1/ CV3 G CV4 G Filter for Check Valve Male N57 102CVF38 G3/ CVF12 G1/ CVF34 G3/ CVF1 G CVF114 G1.1/ CVF112 G1.1/ CVF2 G CVF212 G2.1/ CVF3 G CVF4 G Brass Swing Check Valve with Rubber Seat Female Compact Non-return Valve Male x Female N57 130CVR12 G1/ CVR34 G3/ CVR1 G CVR114 G1.1/ CVR112 G1.1/ CVR2 G CVR212 G2.1/ CVR3 G CVR4 G Brass Non-return Valve, Heavy Duty Female x Female P G1/ G3/ G1/ G3/ G P25 Seal Material VUP8.M NBR G1/ VUP8.VM Viton G1/ VUP4.M NBR G1/ VUP4.VM Viton G1/ Compact Non-return Valve Female x Female T07 Seal Material CNRVM5 NBR M CNRV18 NBR G1/ CNRV18-V Viton G1/ CNRV14 NBR G1/ CNRV14-V Viton G1/ CNRV38 NBR G3/ CNRV38-V Viton G3/ CNRV12 NBR G1/ CNRV12-V Viton G1/

11 Safety 9 Technical Data General Ambient Temperature: 80 C Max Temperature of Medium: 80 C Max Pneumatic Rated Pressure: Vacuum to 16 bar Nominal Flow Rate P to A: 750, 1300, 3300 Nominal Flow Rate A to R: 1300, 2100, 7600 Nominal Size: 6, 8, 13 Hand Slide Valve with Vent Male P27 B ØC D Weight kg HSV18M G1/ HSV14M G1/ HSV12M G1/ Technical Data General Pressure Range: 0 10 bar Temperature Range: C Hand Slide Valve with Vent Female P27 BSPT Ø I L CH HSV18F R1/ HSV14F R1/ HSV38F R3/ HSV12F R1/

12 9 Safety Excess Flow Valve (Air Fuse) The safety excess flow check valve is designed to automatically shut off air flow upon a sudden break in the air line, thereby protecting personnel and property from whipping air hoses. Allows full unrestricted flow of air flow while in normal open position. Entire unit is corrosion free. It automatically re-sets itself after repair is made. Unit is tamper-proof. Meets OSHA safety regulations. Installation The unit is to be installed on compressed air lines leading to pneumatic tools. Technical Data Select the same nominal size safety valve as the hose size leading to the respective air tool. Air flow must be in the direction of the arrow marked in the check valve. A safety check valve should be installed for use before each air tool. The actual length of hose from safety check valve to air tool must not exceed a certain length depending upon the inlet pressure. The volume of air flow (CFM) through an air line will vary according to its length. A longer line will offer more resistance to flow and thus reduce the volume. The length of a hose extending from the safety valve to the air tool must, therefore, be limited to a certain length to insure sufficient flow to trigger the safety valve in case of a break. Check with us for hose length limitations. The closing flow rate (CFM) at various inlet pressure can be obtained from the flow rate chart. Caution Do not reduce safety valve with bushings for use with a smaller air line. If this is done, there will not be a sufficient CFM flow during a line break to shut off the air flow through the safety valve (see technical data). Note Nominal sizes of valve and connecting hose must be consistent i.e. 1/4 valve to be used with 1/4 hose. Safety Excess Flow Check Female x Female P22 NPT SV802 1/ SV803 3/ SV804 1/ See page 48 for Whip Check Hose Safety Device 414

13 Safety 9 Safety valves to blow out non-poisonous and non-flaable gases into the atmosphere in order to protect pressure tanks against overpressure. Please note: Only safety valves that have been set and sealed with lead (plumbed) by us can be delivered with the component symbols, it is thus absolutely necessary to indicate the setting pressure in bar. As functional test, safety valves may be aerated by the way of pulling the haul-off bolt. Repairs may only be carried out by the manufacturer. Technical Data Connection thread: G1/4, G3/8 Max. operating pressure: 24 bar (PN24) Operating temperature: -10 C to +150 C Setting range: 4,5 to 24 bar (5 steps) Opening pressure difference: <10% Closing pressure difference: <10% Material: Brass Seal: Viton Important: The supply connection to the safety valve should not be <DN6, the pressure drop in the supply connection not >3%. Exhaust Capacity Air The exhaust capacities indicated in the table are the minimum values reached when air pressure is raised by 10% above the set pressure. Set Pressure bar Exhaust Flow Capacity (normal condition) m 3 /h l/m Intermediate values can be interpolated. More Variations Available Special Set Pressures, Body Materials, Large s L Compact Safety Valve DN6 Male P26 Set At bar Dimensions L Hex P26 Set At bar Dimensions L Hex BAR G1/ BAR G1/ BAR G1/ BAR G3/ BAR G3/ BAR G3/ BAR G1/ BAR G1/ BAR G1/ BAR G3/ BAR G3/ BAR G3/

14 9 Safety Technical Data Connection thread: G1/4, G3/8, G1/2 Max. operating pressure: 40 bar (PN40) Operating temperature: -10 C to +180 C Setting range: 1 to 40 bar (10 steps) Opening pressure difference: < 10% Closing pressure difference: < 10% (under 3 bar <0.3 bar) Built-in position: Vertical Material: Brass Seal: Viton Important: The supply connection to the safety valve should not be <DN8, the pressure drop in the supply connection not >3%. Exhaust Capacity Air The exhaust capacities indicated in the table are the minimum values reached when air pressure is raised by 10% above the set pressure. Set Pressure bar Exhaust Flow Capacity (normal condition) m 3 /h l/m 1 23, , Intermediate values can be interpolated. More Variations Available Special Set Pressures, Body Materials, Large s L Standard Safety Valve DN8 Male P26 Set At bar Dimensions L Hex P26 Set At bar Dimensions L Hex BAR G1/ BAR G1/ BAR G1/ BAR G1/ BAR G1/ BAR G1/ BAR G3/ BAR G3/ BAR G3/ BAR G3/ BAR G1/ BAR G1/ BAR G1/ BAR G3/ BAR G3/ BAR G3/ BAR G1/ BAR G1/ BAR G1/ BAR G1/ BAR G1/

15 Safety 9 Safety valves to blow out non-poisonous and non-flaable gases into the atmosphere in order to protect pressure tanks against overpressure. Please note: Only safety valves that have been set and sealed with lead (plumbed) by us can be delivered with the component symbols, it is thus absolutely necessary to indicate the setting pressure in bar. As functional test, safety valves may be aerated by the way of pulling the haul-off bolt. Repairs may only be carried out by the manufacturer. Technical Data Connection thread: G1/2, G3/4 Max. operating pressure: 22 bar (PN22) Operating temperature: -10 C to +180 C Setting range: 2 to 22 bar (7 steps) Opening pressure difference: < 10% Closing pressure difference: < 10% (under 3 bar < 0.3 bar) Built-in position: Vertical Material: Brass Seal: FKM (Viton) Important: The supply connection to the safety valve should not be <DN10, the pressure drop in the supply connection not >3%. Exhaust Capacity Air The exhaust capacities indicated in the table are the minimum values reached when air pressure is raised by 10% above the set pressure. Set Pressure bar Exhaust Flow Capacity (normal condition) m 3 /h l/m 2 74, Intermediate values can be interpolated. More Variations Available Special Set Pressures, Body Materials, Large s L Standard Safety Valve, DN10 Male P26 Set At bar Dimensions L Hex P26 Set At bar Dimensions L Hex BAR G1/ BAR G1/ BAR G1/ BAR G1/ BAR G1/ BAR G1/ BAR G3/ BAR G3/ BAR G3/ BAR G3/ BAR G3/ BAR G3/ BAR G1/ BAR G3/

16 9 Solenoid Construction Body and cover: Brass Armature tube: Stainless steel Armature & core: Stainless steel Spring: Stainless steel Seal material: NBR Technical Specifications Maximum fluid viscosity: 25cSt ( 2 /2) Ambient temperature: with class F coil C 2 Way Valve 2/2 Direct Acting, Normally Closed Differential Pressure bar Nominal Power P28 Orifice Min Max AC VA DC AC DC Inrush Holding Watt Coil Type E106AB25/// G1/ E106BB25/// G1/ E106AB35/// G1/ E106BB35/// G1/ E106CB35/// G3/ E106DB35/// G1/ E106CB40/// G3/ E106DB40/// G1/ E106CB45/// G3/ E106DB52/// G1/ Select Coil & Plug from following pages Construction Body and cover: Brass Armature tube: Stainless steel Armature & core: Stainless steel Spring: Stainless steel Seal material: NBR Technical Specifications Maximum fluid viscosity: 25cSt ( 2 /2) Ambient temperature: with class F coil C 3 Way Valve 3/2 Direct Acting, Normally Closed P28 Orifice Differential Pressure bar Nominal Power Min Max AC VA DC Inlet Exhaust AC DC Inrush Holding Watt Coil Type E306AB25/// G1/ E306BB25/// G1/ Select Coil & Plug from following pages 418

17 Solenoid 9 Construction Body and cover: Stainless steel Armature tube: Stainless steel Armature & core: Stainless steel Spring: Stainless steel Seal material: EPDM Technical Specifications Maximum fluid viscosity: 25cSt ( 2 /2) Ambient temperature: with class F coil C with class H coil C 2 Way Valve, Stainless Steel Body & EPDM Seals 2/2 Direct Acting, Normally Closed Differential Pressure bar Nominal Power P28 Orifice Min Max AC VA DC Coil AC DC Inrush Holding Watt Type Width E111AE20/// G1/ E111AE25/// G1/ E110BE35/// G1/ E110BE52/// G1/ E110CE35/// G3/ E110CE52/// G3/ E110DE52/// G1/ Select Coil & Plug from following pages Construction Body and cover: Stainless steel Armature tube: Stainless steel Armature & core: Stainless steel Spring: Stainless steel Seal material: EPDM Technical Specifications Maximum allowable pressure: +10% Maximum differential pressure: +10% Maximum fluid viscosity: 25st ( 2 /s) Ambient temperature: with class F coil only -10º +50ºC with class H coil only -10º +80ºC Universial mounting Temp. Range: E311A: -10ºC +90ºC, E310B: <+40ºC 3 Way Valve, Stainless Steel Body & EPDM Seals 3/2 Direct Acting, Normally Closed P28 Orifice Differential Pressure bar Nominal Power Min Max AC VA DC Inlet Exhaust AC DC Inrush Holding Watt Coil Type Seal E311AE15/// G1/ EPDM E311AE20/// G1/ EPDM E310BE25/// G1/ EPDM Select Coil & Plug from following pages 419

18 9 Solenoid Construction Body and cover: Brass Armature tube: Stainless steel Armature & core: Stainless steel Spring: Stainless steel Seal material: NBR Technical Specifications Minimum differential pressure: 0.15 bar Maximum allowable pressure: 25 bar Ambient temperature: with class F coil C General Purpose Valve 2/2 Servo Assisted, Normally Closed Nominal Power P28 Orifice Differential Pressure bar AC VA DC Min Max Inrush Holding Watt Coil Type E107CB10/// G3/8 10 m 0.15 m E107DB12/// G1/ E107EB18/// G3/ E107FB24/// G E107GB38/// G1.1/ E107HB38/// G1.1/ E107IB50/// G Select Coil & Plug from following pages Construction Body and cover: Brass Armature tube: Up to 1 stainless steel over 1 brass Armature & core: Stainless steel Spring: Stainless steel Seal material: NBR, FPM, EPDM Technical Specifications Minimum differential pressure: 0.15 bar Maximum allowable pressure: 25 bar Maximum fluid viscosity: 25cSt ( 2 /s) Ambient temperature: with class F coil C with class H coil C Preferred mounting position with vertical coil above General Purpose Valve 2/2 Servo Assisted, Normally Open P28 Orifice Nominal Power Differential Pressure bar AC VA DC Min Max Inrush Holding Watt Coil Type E207CB12/// G3/ E207DB12/// G1/ E207EB18/// G3/ E207FB25/// G E207GB37/// G1.1/ E207HB37/// G1.1/ E207IB50/// G Select Coil & Plug from following pages 420

19 Solenoid 9 Construction Body and cover: Brass Armature tube: Stainless steel Armature & core: Stainless steel Seal material: NBR Technical Specifications Minimum differential pressure: 0.15 bar Maximum fluid viscosity: 25cSt ( 2 /s) Ambient temperature: with class F coil C General Purpose Valve 2/2 Assisted Lift Diaphragm, Normally Closed Differential Pressure bar Nominal Power P28 Orifice Min Max AC VA DC AC DC Inrush Holding Watt Coil Type E108CB12/// G3/ E108DB12/// G1/ E108EB18/// G3/ * D108EB18/// G3/ ** E108FB24/// G * D108FB24/// G ** Select Coil & Plug from following pages *=AC only **=DC only Construction Body and cover: Brass Armature tube: Stainless steel Armature & core: Stainless steel Spring: Stainless steel Seal material: NBR Technical Specifications Ambient temperature: C Valve for Vacuum 2/2 Servo Assisted, Normally Closed Differential Pressure bar Nominal Power P28 Orifice Min Max AC VA DC Coil AC DC Inrush Holding Watt Type Width E107CB12/5/ G3/8 10 Vacuum E107DB12/5/ G1/2 12 Vacuum E107EB18/5/ G3/4 18 Vacuum E107FB24/5/ G1 24 Vacuum E107GB38/5/ G1.1/4 37 Vacuum E107HB38/5/ G1.1/2 37 Vacuum E107IB50/5/ G2 50 Vacuum Select Coil & Plug from following pages 421

20 9 Solenoid Construction Body and cover: Brass Armature tube: Stainless steel Armature & core: Stainless steel Spring: Stainless steel Piston: Brass Piston ring: PTFE reinforced Seal material: Main seal PTFE otherwise FPM Technical Specifications Minimum differential pressure: 1 bar Maximum allowable pressure: 60 bar Ambient temperature: with class F coil C High Pressure Valve 2/2 Servo Assisted Piston, Normally Closed, 50 bar Nominal Power P28 Orifice Differential Pressure bar AC VA DC Min Max Inrush Holding Watt Coil Type E119CV12/1/ G3/ E119DV12/1/ G1/ Select Coil & Plug from following pages Construction Body and cover: Brass Armature tube: Stainless steel Armature & core: Stainless steel Spring: Stainless steel Piston: Brass Piston ring: PTFE reinforced Seal material: Main seal PTFE otherwise FPM Technical Specifications Minimum differential pressure: 2.5 bar Ambient temperature: with class H coil C Preferred mounting position with vertical coil above Valve for Steam 2/2 Servo Assisted Piston, Normally Closed, 180ºC Nominal Power P28 Orifice Differential Pressure bar AC VA DC Min Max Inrush Holding Watt Coil Type E119CW12/1/ G3/ H E119DW12/1/ G1/ H Select Coil & Plug from following pages 422

21 Solenoid Coils 9 Type 2 Solenoid Coil Class F Type 2 Solenoid Coil Class H High Temperature Applications P28 Description Type 20E 230V AC 30 Wide D 110V AC 30 Wide B 24V AC 30 Wide V DC 30 Wide V DC 30 Wide P28 Description Type 22E 230V AC 30 Wide D 110V AC 30 Wide B 24V AC 30 Wide V DC 30 Wide V DC 30 Wide Electrical Socket Connector M18 Type G1NU Type 3 Solenoid Coil 22 Coil Type 5 Solenoid Coil 36 Coil P28 Description Type 30E 230V AC 22 Wide D 110V AC 22 Wide B 24V AC 22 Wide V DC 22 Wide V DC 22 Wide Electrical Socket Connector P28 Description Type 52E 230V AC 36 Wide D 110V AC 36 Wide B 24V AC 36 Wide V DC 36 Wide V DC 36 Wide Electrical Socket Connector M18 Type M18 Type M1NS G1NU Features Selectable timing range V AC 50/60Hz V DC DIN ISO-4400/6952 IP65 NEMA IV Test facility Dual earth O/P 6 & 12 o clock. Form A Special timing ranges available on request Technical Data Fluid media: Air - Water - Oil Operation: 2/2 direct acting, N.C. Internal diameter: 8 Cv value: 1.00 Max inlet pressure: 0-7 bar Working temperature: -5 to +80 ºC Electrical Timer Module IP65 NEMA IV L14 On Time Off Time Timed Drain Valve Female x Female S18 BSP Working Pressure Sec Min PU220i-03ST-230V G3/8 0-7 bar

22 9 Electrical Socket Connectors Housing colour: Black, grey Type of contact: Screw with conductor protection Contact spacing: 18 Number of poles: 2 poles + /3 + Cable entry: PG9 / PG11 (unified) Max conductor section: Fixing screw: M3 x 32.5 Profile gasket: NBR (other types upon request) Protection class: IP65 assembled Packing unit: *100 pcs with fixing screw and standard gasket Connector DIN43650/A Standard M18 Description G1NU2000 PG9 / PG11 Black 2 Poles + Earth Housing colour: Transparent Type of contact: Screw with conductor protection Contact spacing: 18 Number of poles: 2 poles + Cable entry: PG9 / PG11 (unified) Max conductor section: Fixing screw: M3 x 32.5 Profile gasket: NBR (other types upon request) Protection class: IP65 assembled Connector DIN43650/A LED & Protection Circuit M18 Description G1TU2VL1 PG9 / PG11 24V 2 Poles + Earth G1TU2VL2 PG9 / PG11 115V 2 Poles + Earth G1TU2VL3 PG9 / PG11 230V 2 Poles + Earth Housing colour: Black Type of contact: Soldered Contact spacing: 18 Number of poles: 2 poles + 2 Earth position: h6/h12 (ground connection) Type of cable: PVC H05VVD Cable length: 1 or 2 metres (other length upon request) Max conductor section: IP 67 with moulded cable Fixing screw: M3 x 28.7 Profile gasket: NBR (other types upon request) Connector DIN43650/A Moulded Cable M18 Description CG1N02000C022 2 Metres 2 Poles + Double Earth

23 Electrical Socket Connectors 9 Housing colour: Black Type of contact: Soldered, 18 Number of poles: 2 poles + 2 Earth position: h6/h12 (ground connection) Type of cable: PVC H05VVD Cable length: 1 or 2 metres (other length upon request) Max conductor section: Protection class: IP 67 with moulded cable Fixing screw: M3 x 28.7 Profile gasket: NBR (other types upon request) Connector DIN43650/A Moulded Cable, LED & Protection Circuit M18 Description CG1N02VL1C022 2 Metre 24V 2 Poles + Double Earth CG1N02VL2C022 2 Metre 115V 2 Poles + Double Earth CG1N02VL3C022 2 Metre 230V 2 Poles + Double Earth Housing colour: Black, grey Type of contact: Screw with conductor protection Contact spacing: 11 Number of poles: 2 poles + Cable entry: PG9 Max conductor section: Fixing screw: M3 x 28.7 Profile gasket: NBR (other types upon request) Protection class: IP 65 assembled Connector DIN43650/B-Industrial Standard M18 Description M1NS2000 PG9 Black 2 Poles + Earth at Cable End Housing colour: Transparent Type of contact: Screw with conductor protection Contact spacing: 11 Number of poles: 2 poles + Cable entry: PG9 Max conductor section: Fixing screw: M3 x 28.7 Profile gasket: NBR (other types upon request) Protection class: IP 65 assembled Connector DIN43650/B-Industrial LED & Protection Circuit M18 Description M1TS2VL1 PG9 24V 2 Poles + Earth M1TS2VL2 PG9 115V 2 Poles + Earth M1TS2VL3 PG9 230V 2 Poles + Earth

24 9 Electrical Socket Connectors Housing colour: Black Type of contact: Soldered Contact spacing: 11 Number of poles: 2 poles + Earth position: h6 or h12 Type of cable: PVC H05VVF Cable length: 1 or 2 metres (other length upon request) Max conductor section: Protection class: IP 67 with moulded cables Fixing screw: M3 x 28.7 Profile gasket: NBR (other types upon request) Connector DIN43650/B-Industrial Moulded Cabled M18 Description CM1N02000A022 2 Metre 2 Poles + Earth at Cable End CM1N02000B022 2 Metre 2 Poles + Earth Opposite Cable End Housing colour: Black Type of contact: Soldered Contact spacing: 11 Number of poles: 2 poles + Earth position: h6 or h12 Type of cable: PVC H05VVF Cable length: 1 or 2 metres (other length upon request) Max conductor section: Protection class: IP 67 with moulded cables Fixing screw: M3 x 28.7 Profile gasket: NBR (other types upon request) Connector DIN43650/B-Industrial Moulded Cabled, LED & Protection Circuit M18 Description CM1N02VL1A022 2 Metre 24V Poles + Earth at Cable End CM1N02VL2A022 2 Metre 115V Poles + Earth at Cable End CM1N02VL3A023 2 Metre 230V Poles + Earth at Cable End CM1N02VL1B022 2 Metre 24V Poles + Earth Opposite End CM1N02VL2B022 2 Metre 115V Poles + Earth Opposite End CM1N02VL3B022 2 Metre 230V Poles + Earth Opposite End Housing colour: Black, grey Type of contact: Screw with conductor protection Contact spacing: 10 Number of poles: 2 poles + Cable entry: PG9 Max conductor section: Fixing screw: M3 x 32.5 Profile gasket: NBR (other types upon request) Protection class: IP 65 assembled Connector DIN43650/B-ISO6952 Standard M18 Description M2NS2000 PG9 Black 2 Poles + Earth

25 Electrical Socket Connectors 9 Housing colour: Transparent Type of contact: Screw with conductor protection Contact spacing: 10 Number of poles: 2 poles + Cable entry: PG9 Max conductor section: Fixing screw: M3 x 32.5 Profile gasket: NBR (other types upon request) Protection class: IP 65 assembled Connector DIN43650/B-ISO6952 LED & Protection Circuit M18 Description M2TS2VL1 PG9 24V 2 Poles + Earth M2TS2VL2 PG9 115V 2 Poles + Earth M2TS2VL3 PG9 230V 2 Poles + Earth Housing colour: Black, grey Type of contact: Screw with conductor protection Contact spacing: 9.4 Number of poles: 3 poles + Cable entry: PG7 Max conductor section: Fixing screw: M3 x 28.8 Profile gasket: NBR (other types upon request) Protection class: IP 65 assembled Connector DIN43650/C Standard M18 Description P1NZ3000 PG7 Black 3 Poles + Earth

26 9 M8 Electrical Cables Temperature Range -25 C to +70 C Environmental Conditions Protection class (IEC 60529): IP 67 Technical Data Rated voltage: 60V AC/DC Rated current: 4A Material Contact material: Phosphorous bronze Contact surface material: Nickel + 0,45µm, AU gold plated Housing material: Nylon % glass fibre Coupling nut material: An AI/NI O-Ring: NBR Product Description M8 male/female connector with cable, 3/4 poles, angled 90 /Straight 180 Type of contact: male/female Number of contacts: 3/4 poles Cable material: PUR Cable colour: black Cable length: 1 metre Conductor size: Standard: IEC (Ed, 1) / IEC Housing colour: black M8 Electrical Connector with PVC Cable Straight M18 Description FD3A1Z Female 3-Pole 1 metre cable FD4A1Z Female 4-Pole 1 metre cable MD3A1Z Male 3-Pole 1 metre cable MD4A1Z Male 4-Pole 1 metre cable Temperature Range -25 C to +70 C Environmental Conditions Protection class (IEC 60529): IP 67 Technical Data Rated voltage: 60V AC/DC Rated current: 4A Material Contact material: Phosphorous bronze Contact surface material: Nickel + 0,45µm, AU gold plated Housing material: Nylon % glass fibre Coupling nut material: An AI/NI O-Ring: NBR Product Description M8 male/female connector with cable, 3/4 poles, angled 90 /Straight 180 Type of contact: male/female Number of contacts: 3/4 poles Cable material: PUR Cable colour: black Cable length: 1 metre Conductor size: Standard: IEC (Ed, 1) / IEC Housing colour: black M8 Electrical Connector with PVC Cable Angled M18 Description FA3A1Z Female 3-Pole 1 metre cable FA4A1Z Female 4-Pole 1 metre cable MA3A1Z Male 3-Pole 1 metre cable MA4A1Z Male 4-Pole 1 metre cable

27 M8 Electrical Cables 9 Temperature Range -25 C to +70 C Environmental Conditions Protection class (IEC 60529): IP 67 Material Contact material: Phosphorous bronze Contact surface material: Nickel + 0,45µm, AU gold plated Housing material: Nylon % glass fibre Coupling nut material: An AI/NI O-Ring: NBR Product Description Extension M8 male and M8 female connector with PVC moulded cable or shielded Number of poles: 3/4 Operating voltage: 60V AC/DC Operating current: 4A Max. conductor size: Pin dimension: 1 M8 Electrical Connector with PUR Cable Straight M18 Description FD3C1Z Female 3-Pole 1 metre cable FD4C1Z Female 4-Pole 1 metre cable MD3C1Z Male 3-Pole 1 metre cable MD4C1Z Male 4-Pole 1 metre cable Temperature Range -25 C to +70 C Environmental Conditions Protection class (IEC 60529): IP 67 Material Contact material: Phosphorous bronze Contact surface material: Nickel + 0,45µm, AU gold plated Housing material: Nylon % glass fibre Coupling nut material: An AI/NI O-Ring: NBR Product Description Extension M8 male and M8 female connector with PVC moulded cable or shielded Number of poles: 3/4 Operating voltage: 60V AC/DC Operating current: 4A Max. conductor size: Pin dimension: 1 M8 Electrical Connector with PUR Cable Angled M18 Description FA3C1Z Female 3-Pole 1 metre cable FA4C1Z Female 4-Pole 1 metre cable MA3C1Z Male 3-Pole 1 metre cable MA4C1Z Male 4-Pole 1 metre cable

28 9 Solenoid TM Suitable for use on air, gas, hot water and oil applications Normally closed Comes complete with solenoid coil and plug Direct acting - no minimum pressure Rated IP 65 ZS Series 2/2 Solenoid Valve Brass Body NBR Seals N44 Orifice CV Value Min pressure Max Working Pressure Power Air, Gas Water, Hot Water, Liquid Light Oil Max VA W Temp AC DC AC DC AC DC AC DC C V Voltage ZS15E2-10L G1/ V AC ZS15E1-10L G1/ V AC ZS15E4-10L G1/ V DC ZS15E7-10L G1/ V AC ZS20E2 G3/ V AC ZS20E1 G3/ V AC ZS20E4 G3/ V DC ZS20E7 G3/ V AC ZS25E2 G V AC ZS25E1-25L G V AC ZS25E4 G V DC ZS25E7 G V AC Suitable for use on air, gas, hot water and oil applications Normally closed Comes complete with solenoid coil and plug Direct acting - no minimum pressure Rated IP 65 ZS Series 2/2 Solenoid Valve Stainless Steel Body Viton Seals N45 Orifice CV Value Min pressure Max Working Pressure Power Air, Gas Water, Hot Water, Liquid Light Oil Max VA W Temp AC DC AC DC AC DC AC DC C V Voltage ZS15VE2-10LS2 G1/ V AC ZS15VE1-10LS2 G1/ V AC ZS15VE4-10LS2 G1/ V DC ZS15VE7-10LS2 G1/ V AC ZS20VE2S2 G3/ V AC ZS20VE1S2 G3/ V AC ZS20VE4S2 G3/ V DC ZS20VE7S2 G3/ V AC ZS25VE2S2 G V AC ZS25VE1-25LS2 G V AC ZS25VE4S2 G V DC ZS25VE7S2 G V AC

29 Actuated Ball TM 9 Brass Nickel Plated Full Bore Direct Mount Maximum Working Pressure: 40 bar up to 2 30 bar 2.1/2 & 3 Working Temperature: 0 C to 80 C Actuated Brass Ball Valve Double Acting, Pneumatic Actuator Working Temperature: 0 C to 70 C Actuated Brass Ball Valve Electric Low Voltage (24V AC/DC) S40 DN TMDA14E G1/4" TMDA38E G3/8" TMDA12E G1/2" TMDA34E G3/4" TMDA1E G1" TMDA114E G1.1/4" TMDA112E G1.1/2" TMDA2E G2" TMDA212E G2.1/2" TMDA3E G3" S40 DN TMEL2014E G1/4" TMEL2038E G3/8" TMEL2012E G1/2" TMEL2034E G3/4" TMEL201E G1" TMEL20114E G1.1/4" TMEL20112E G1.1/2" TMEL202E G2" TMEL140212E G2.1/2" TMEL1403E G3" Actuated Brass Ball Valve Single Acting, Pneumatic Actuator S40 DN Actuated Brass Ball Valve Electric High Voltage (85-220V AC/DC) S40 DN TMSA14E G1/4" TMSA38E G3/8" TMSA12E G1/2" TMSA34E G3/4" TMSA1E G1" TME2014E G1/4" TME2038E G3/8" TME2012E G1/2" TME2034E G3/4" TME201E G1" TMSA114E G1.1/4" TMSA112E G1.1/2" TMSA2E G2" TMSA212E G2.1/2" TME20114E G1.1/4" TME20112E G1.1/2" TME202E G2" TME140212E G2.1/2" TMSA3E G3" TME1403E G3"

30 9 Actuated Ball TM Brass Nickel Plated Full Bore 3 Way L Port Maximum Working Pressure: 40 bar up to 1.1/4 25 bar 1.1/2 & 2 Working Temperature: 0 C to 80 C Working Temperature: 0 C to 70 C Actuated Brass Ball Valve, 3 Way Double Acting, Pneumatic Actuator, L Port Actuated Brass Ball Valve, 3 Way Electric Low Voltage (24V AC/DC), L Port S40 DN TMDA14L G1/4" TMDA38L G3/8" TMDA12L G1/2" TMDA34L G3/4" TMDA1L G1" TMDA114L G1.1/4" TMDA112L G1.1/2" TMDA2L G2" S40 DN TMEL2014L G1/4" TMEL2038L G3/8" TMEL2012L G1/2" TMEL2034L G3/4" TMEL201L G1" TMEL35114L G1.1/4" TMEL35112L G1.1/2" TMEL352L G2" Actuated Brass Ball Valve, 3 Way Single Acting, Pneumatic Actuator, L Port Actuated Brass Ball Valve, 3 Way Electric High Voltage (85-220V AC/DC), L Port S40 DN TMSA14L G1/4" TMSA38L G3/8" TMSA12L G1/2" TMSA34L G3/4" S40 DN TME2014L G1/4" TME2038L G3/8" TME2012L G1/2" TME2034L G3/4" TMSA1L G1" TMSA114L G1.1/4" TMSA112L G1.1/2" TMSA2L G2" TME201L G1" TME35114L G1.1/4" TME35112L G1.1/2" TME352L G2"

31 Actuated Ball TM 9 Brass Nickel Plated Full Bore 3 Way T Port Maximum Working Pressure: 40 bar up to 1.1/4 25 bar 1.1/2 & 2 Working Temperature: 0 C to 80 C Working Temperature: 0 C to 70 C Actuated Brass Ball Valve, 3 Way Double Acting, Pneumatic Actuator, T Port Actuated Brass Ball Valve, 3 Way Electric Low Voltage (24V AC/DC), T Port S40 DN TMDA14T G1/4" TMDA38T G3/8" TMDA12T G1/2" TMDA34T G3/4" TMDA1T G1" TMDA114T G1.1/4" TMDA112T G1.1/2" TMDA2T G2" S40 DN TME2014T G1/4" TME2038T G3/8" TME2012T G1/2" TME2034T G3/4" TME201T G1" TME35114T G1.1/4" TME35112T G1.1/2" TME352T G2" Actuated Brass Ball Valve, 3 Way Single Acting, Pneumatic Actuator, T Port Actuated Brass Ball Valve, 3 Way Electric High Voltage (85-220V AC/DC), T Port S40 DN TMSA14T G1/4" TMSA38T G3/8" TMSA12T G1/2" TMSA34T G3/4" S40 DN TMEL2014T G1/4" TMEL2038T G3/8" TMEL2012T G1/2" TMEL2034T G3/4" TMSA1T G1" TMSA114T G1.1/4" TMSA112T G1.1/2" TMSA2T G2" TMEL201T G1" TMEL35114T G1.1/4" TMEL35112T G1.1/2" TMEL352T G2"

32 9 Actuated Ball TM Stainless Steel 2 Piece Full Bore Maximum Working Pressure: 63 bar (1000psi) Working Temperature: 0 C to 80 C Working Temperature: 0 C to 70 C Actuated, Stainless Steel, Direct Mount Ball Valve, 2 Piece Double Acting, Pneumatic Actuator Actuated, Stainless Steel, Direct Mount Ball Valve, 2 Piece Electric Low Voltage (24V AC/DC) S40 DN TMDA14SS2 G1/4" TMDA38SS2 G3/8" TMDA12SS2 G1/2" TMDA34SS2 G3/4" TMDA1SS2 G1" TMDA114SS2 G1.1/4" TMDA112SS2 G1.1/2" TMDA2SS2 G2" S40 DN TME20114SS2 G1/4" TMEL2038SS2 G3/8" TMEL2012SS2 G1/2" TMEL2034SS2 G3/4" TMEL201SS2 G1" TMEL20114SS2 G1.1/4" TMEL35112SS2 G1.1/2" TMEL552SS2 G2" Actuated, Stainless Steel, Direct Mount Ball Valve, 2 Piece Single Acting, Pneumatic Actuator Actuated, Stainless Steel, Direct Mount Ball Valve, 2 Piece Electric High Voltage (85-220V AC/DC) S40 DN TMSA14SS2 G1/4" TMSA38SS2 G3/8" TMSA12SS2 G1/2" S40 DN TME2014SS G1/4" TME2038SS2 G3/8" TME2034SS2 G1/2" TMSA34SS2 G3/4" TMSA1SS2 G1" TMSA114SS2 G1.1/4" TMSA112SS2 G1.1/2" TME3034SS2 G3/4" TME201SS2 G1" TME20114SS2 G1.1/4" TME35112SS2 G1.1/2" TMSA2SS2 G2" TME552SS2 G2"

33 Actuated Ball TM 9 Stainless Steel 3 Piece Full Bore Maximum Working Pressure: 63 Bar (1000psi) Working Temperature: 0 C to 80 C Working Temperature: 0 C to 70 C Actuated, Stainless Steel, Direct Mount Ball Valve, 3 Piece Double Acting, Pneumatic Actuator Actuated, Stainless Steel, Direct Mount Ball Valve, 3 Piece Electric Low Voltage (24V AC/DC) S40 DN TMDA14SS G1/4" TMDA38SS G3/8" TMDA12SS G1/2" TMDA34SS G3/4" TMDA1SS G1" TMDA114S G1.1/4" TMDA112SS G1.1/2" TMDA2SS G2" TMDA212SS G2.1/2" TMDA3SS G3" TMDA4SS G4" S40 DN TMEL2014SS G1/4" TMEL2038SS G3/8" TME2012SS G1/2" TME2034SS G3/4" TME201SS G1" TME35114SS G1.1/4" TME35112SS G1.1/2" TME552SS G2" TME140212SS G2.1/2" TME1403SS G3" TME3004SS G4" Actuated, Stainless Steel, Direct Mount Ball Valve, 3 Piece Single Acting, Pneumatic Actuator S40 DN Actuated, Stainless Steel, Direct Mount Ball Valve, 3 Piece Electric High Voltage (85-220V AC/DC) S40 DN TMSA14SS G1/4" TMSA38SS G3/8" TMSA12SS G1/2" TMSA34SS G3/4" TMSA1SS G1" TMSA114SS G1.1/4" TME2014SS G1/4" TME2038SS G3/8" TME2012SS G1/2" TME2034SS G3/4" TME201SS G1" TME35114SS G1.1/4" TMSA112SS G1.1/2" TMSA2SS G2" TMSA212SS G2.1/2" TMSA3SS G3" TME35112SS G1.1/2" TME552SS G2" TME140212SS G2.1/2" TME1403SS G3" TMSA4SS G4" TME3004SS G4"

34 9 Actuated Ball TM Stainless Steel 3 Way L Port Maximum Working Pressure: 63 bar (1000psi) Working Temperature: 0 C to 80 C Working Temperature: 0 C to 70 C Actuated, Stainless Steel, Direct Mount Ball Valve Double Acting, Pneumatic Actuator, 3 Way L Port Actuated, Stainless Steel, Direct Mount Ball Valve Electric Low Voltage (24V AC/DC), 3 Way L Port S40 DN TMDA14SSL G1/4" TMDA38SSL G3/8" TMDA12SSL G1/2" TMDA34SSL G3/4" TMDA1SSL G1" TMDA114SSL G1.1/4" TMDA112SSL G1.1/2" TMDA2SSL G2" S40 DN TMEL2014SSL G1/4" TMEL2038SSL G3/8" TMEL2012SSL G1/2" TMEL2034SSL G3/4" TMEL351SSL G1" TMEL35114SSL G1.1/4" TMEL55112SSL G1.1/2" TMEL852SSL G2" Actuated, Stainless Steel, Direct Mount Ball Valve Single Acting, Pneumatic Actuator, 3 Way L Port Actuated, Stainless Steel, Direct Mount Ball Valve Electric High Voltage (85-220V AC/DC), 3 Way L Port S40 DN TMSA14SSL G1/4" TMSA38SSL G3/8" TMSA12SSL G1/2" S40 DN TME2014SSL G1/4" TME2038SSL G3/8" TME2012SSL G1/2" TMSA34SSL G3/4" TMSA1SSL G1" TMSA114SSL G1.1/4" TMSA112SSL G1.1/2" TME2034SSL G3/4" TME351SSL G1" TME35114SSL G1.1/4" TME44112SSL G1.1/2" TMSA2SSL G2" TME852SSL G2"

35 Actuated Ball TM 9 Stainless Steel 3 Way T Port Maximum Working Pressure: 63 bar (1000psi) Working Temperature: 0 C to 80 C Working Temperature: 0 C to 70 C Actuated, Stainless Steel, Direct Mount Ball Valve Double Acting, Pneumatic Actuator, 3 Way T Port Actuated, Stainless Steel, Direct Mount Ball Valve Electric Low Voltage (24V AC/DC), 3 Way T Port S40 DN TMDA14SST G1/4" TMDA38SST G3/8" TMDA12SST G1/2" TMDA34SST G3/4" TMDA1SST G1" TMDA114SST G1.1/4" TMDA112SST G1.1/2" TMDA2SST G2" S40 DN TMEL2014SST G1/4" TMEL2038SST G3/8" TMEL12SST G1/2" TMEL2034SST G3/4" TMEL351SST G1" TMEL35114SST G1.1/4" TMEL55112SST G1.1/2" TMEL852SST G2" Actuated, Stainless Steel, Direct Mount Ball Valve Single Acting, Pneumatic Actuator, 3 Way T Port Actuated, Stainless Steel, Direct Mount Ball Valve Electric High Voltage (85-220V AC/DC), 3 Way T Port S40 DN TMSA14SST G1/4" TMSA38SST G3/8" TMSA12SST G1/2" S40 DN TME14SST G1/4" TMEL38SST G3/8" TME20SST G1/2" TMSA34SST G3/4" TMSA1SST G1" TMSA114SST G1.1/4" TMSA112SST G1.1/2" TME2034SST G3/4" TME351SST G1" TME35114SST G1.1/4" TME55112SST G1.1/2" TMSA2SST G2" TME85SST G2"

36 9 Actuated Ball TM Stainless Steel Full Bore Direct Mount Maximum Working Pressure: 20 bar Working Temperature: 0 C to 80 C Working Temperature: 0 C to 70 C ANSI150 Flanged, Stainless Steel, Ball Valve Double Acting, Pneumatic Actuator ANSI150 Flanged, Stainless Steel, Ball Valve Electric Low Voltage (24V AC/DC) S40 DN TMDA12SSANSI150 1/2" TMDA34SSANSI150 3/4" TMDA1SSANSI150 1" TMDA112SSANSI /2" TMDA2SSANSI150 2" TMDA212SSANSI /2" TMDA3SSANSI150 3" TMDA4SSANSI150 4" S40 DN TMELV2020D08 1/2" TMELV2020D12 3/4" TMELV2020D16 1" TMELV2020D24 1.1/2" TMELV2020D32 2" TMELV2020D40 2.1/2" TMELV2020D48 3" TMELV2020D64 4" TMDA6SSANSI150 6" TMDA8SSANSI150 8" ANSI150 Flanged, Stainless Steel, Ball Valve Single Acting, Pneumatic Actuator S40 DN ANSI150 Flanged, Stainless Steel, Ball Valve Electric High Voltage (85-220V AC/DC) S40 DN TMSA12SSANSI150 1/2" TMSA34SSANSI150 3/4" TMSA1SSANSI150 1" TMSA112SSANSI /2" TMSA2SSANSI150 2" TMEHV2020D08 1/2" TMEHV2020D12 3/4" TMEHV2020D16 1" TMEHV2020D24 1.1/2" TMEHV2020D32 2" TMSA212SSANSI /2" TMSA3SSANSI150 3" TMSA4SSANSI150 4" TMSA6SSANSI150 6" TMEHV2020D40 2.1/2" TMEHV2020D48 3" TMEHC2020D64 4" TMSA8SSANSI150 8"

37 Actuated Ball TM 9 Stainless Steel Full Bore Direct Mount Maximum Working Pressure: 40 bar up to 2 16 bar over 2 Working Temperature: 0 C to 80 C Actuated PN16 Flanged, Stainless Steel, Ball Valve Double Acting, Pneumatic Actuator S40 DN TMDA12SSPN16 G1/2" TMDA34SSPN16 G3/4" TMDA1SSPN16 G1" TMDA114SSPN16 G1.1/4" TMDA112SSPN16 G1.1/2" TMDA2SSPN16 G2" TMDA212SSPN16 G2.1/2" TMDA3SSPN16 G3" TMDA4SSPN16 G4" TMDA5SSPN16 G5" TMDA6SSPN16 G6" TMDA8SSPN16 G8" Working Temperature: 0 C to 70 C Actuated PN16 Flanged, Stainless Steel, Ball Valve Electric Low Voltage (24V AC/DC) S40 DN TMELV2019D08 G1/2" TMELV2019D12 G3/4" TMELV2019D16 G1" TMELV2019D20 G1.1/4" TMELV2019D24 G1.1/2" TMELV2019D32 G2" TMELV2019D40 G2.1/2" TMELV2019D48 G3" TMELV2019D64 G4" TMELV2019D80 G5" Actuated PN16 Flanged, Stainless Steel, Ball Valve Single Acting, Pneumatic Actuator S40 DN TMSA12SSPN16 G1/2" TMSA34SSPN16 G3/4" Actuated PN16 Flanged, Stainless Steel, Ball Valve Electric High Voltage (85-220V AC/DC) S40 DN TMSA1SSPN16 G1" TMSA114SSPN16 G1.1/4" TMSA112SSPN16 G1.1/2" TMSA2SSPN16 G2" TMSA212SSPN16 G2.1/2" TMEHV2019D08 G1/2" TMEH2019D12 G3/4" TMEHV2019D16 G1" TMEHV2019D20 G1.1/4" TMEHV2019D24 G1.1/2" TMSA3SSPN16 G3" TMSA4SSPN16 G4" TMSA5SSPN16 G5" TMSA6SSPN16 G6" TMEHV2019D32 G2" TMEHV2019D40 G2.1/2" TMEHV2019D48 G3" TMEHV2019D64 G4" TMSA8SSPN16 G8" TMEHV2019D80 G5"

38 9 Wafer Butterfly TM Wafer Butterfly Cast Iron Body, Stainless Steel Disc, NBR Liner, Lockable Lever Suitable for mounting between Flanges: BS10 Table D/E, PN6/10/16 and ANSI150 Working Temperature: -20 C to 80 C Maximum Working Pressure: 16 bar Cast Iron Body, Stainless Steel Disc, NBR Liner Lever Operated Cast Iron Body, Stainless Steel Disc, NBR Liner Gear Operated S40 Size DN Face to Face S40 Size DN Face to Face BFWL112-NBR 1.1/2" BFWL2-NBR 2" BFWL212-NBR 2.1/2" BFWL3-NBR 3" BFWL4-NBR 4" BFWL5-NBR 5" BFWL6-NBR 6" BFWL8-NBR 8" BFWL10-NBR 10" BFVW9112-NBR 1.1/2" BFVW92-NBR 2" BFVW9212-NBR 2.1/2" BFVW93-NBR 3" BFVW94-NBR 4" BFVW95-NBR 5" BFVW96-NBR 6" BFVW98-NBR 8" BFVW910-NBR 10" BFVW912-NBR 12" BFVW914-NBR 14" BFVW916-NBR 16" BFVW918-NBR 18" BFVW920-NBR 20" BFVW924-NBR 24"

39 Wafer Butterfly TM 9 Wafer Butterfly Cast Iron Body, Stainless Steel Disc, NBR Liner, Lockable Lever Suitable for mounting between Flanges: BS10 Table D/E, PN6/10/16 and ANSI150 Working Temperature: -20 C to 80 C Maximum Working Pressure: 16 bar Cast Iron Body, Stainless Steel Disc, NBR Liner Pneumatic Double Acting Cast Iron Body, Stainless Steel Disc, NBR Liner Electric Actuated, Low Voltage (12-24V AC/DC) S40 Size DN Face to Face S40 Size DN Face to Face BFVWA112-NBR 1.1/2" BFVWA2-NBR 2" BFVWA212-NBR 2.1/2" BFVWA3-NBR 3" BFVWA4-NBR 4" BFVWA5-NBR 5" BFVWA6-NBR 6" BFVWA8-NBR 8" BFVWEA112-NBRLV 1.1/2" BFVWEA2-NBRLV 2" BFVWEA212-NBRLV 2.1/2" BFVWEA3-NBRLV 3" BFVWEA4-NBRLV 4" BFVWEA5-NBRLV 5" BFVWEA6-NBRLV 6" BFVWEA8-NBRLV 8" BFVWA10-NBR 10" BFVWA12-NBR 12" Cast Iron Body, Stainless Steel Disc, NBR Liner Pneumatic Single Acting S40 Size DN Face to Face Cast Iron Body, Stainless Steel Disc, NBR Liner Electric Actuated, High Voltage (85-230V AC/DC) S40 Size DN Face to Face BFVWSA112-NBR 1.1/2" BFVWS2-NBR 2" BFVWSA212-NBR 2.1/2" BFVWSA3-NBR 3" BFVWSA4-NBR 4" BFVWSA5-NBR 5" BFVWEA112-NBRHV 1.1/2" BFVWEA2-NBRHV 2" BFVWEA212-NBRHV 2.1/2" BFVWEA3-NBRHV 3" BFVWEA4-NBRHV 4" BFVWEA5-NBRHV 5" BFVWSA6-NBR 6" BFVWSA8-NBR 8" BFVWSA10-NBR 10" BFVWSA12-NBR 12" BFVWEA6-NBRHV 6" BFVWEA8-NBRHV 8"

40 9 Wafer Butterfly TM Wafer Butterfly Cast Iron Body, Stainless Steel Disc, EPDM Liner, Lockable Lever Suitable for mounting between Flanges: BS10 Table D/E, PN6/10/16 and ANSI150 Working Temperature: -20 C to 80 C Maximum Working Pressure: 16 bar Cast Iron Body, Stainless Steel Disc, EPDM Liner Lever Operated Cast Iron Body, Stainless Steel Disc, EPDM Liner Gear Operated S40 Size DN Face to Face S40 Size DN Face to Face BFVWL112-EPDM 1.1/2" BFVWL2-EPDM 2" BFVWL212-EPDM 2.1/2" BFVWL3-EPDM 3" BFVWL4-EPDM 4" BFVWL5-EPDM 5" BFVWL6-EPDM 6" BFVWL8-EPDM 8" BFVWL10-EPDM 10" BFVWG112-EPDM 1.1/2" BFVWG2-EPDM 2" BFVWG212-EPDM 2.1/2" BFVWG3-EPDM 3" BFVWG4-EPDM 4" BFVWG5-EPDM 5" BFVWG6-EPDM 6" BFVWG8-EPDM 8" BFVWG10-EPDM 10" BFVWG12-EPDM 12" BFVWG14-EPDM 14" BFVWG16-EPDM 16" BFVWG18-EPDM 18" BFVWG20-EPDM 20" BFVWG24-EPDM 24"

41 Wafer Butterfly TM 9 Wafer Butterfly Cast Iron Body, Stainless Steel Disc, EPDM Liner, Lockable Lever Suitable for mounting between Flanges: BS10 Table D/E, PN6/10/16 and ANSI150 Working Temperature: -20 C to 80 C Maximum Working Pressure: 16 bar Cast Iron Body, Stainless Steel Disc, EPDM Liner Pneumatic Double Acting Cast Iron Body, Stainless Steel Disc, EPDM Liner Electric Actuated, Low Voltage (12-24V AC/DC) S40 Size DN Face to Face S40 Size DN Face to Face BFVWDA112-EPDM 1.1/2" BFVWDA2-EPDM 2" BFVWDA22-EPDM 2.1/2" BFVWDA3-EPDM 3" BFVWDA4-EPDM 4" BFVWDA5-EPDM 5" BFVWDA6-EPDM 6" BFVWDA8-EPDM 8" BFVWEA112-EPDMLV 1.1/2" BFVWEA2-EPDMLV 2" BFVWEA212-EPDMLV 2.1/2" BFVWEA3-EPDMLV 3" BFVWEA4-EPDMLV 4" BFVWEA5-EPDMLV 5" BFVWEA6-EPDMLV 6" BFVWEA8-EPDMLV 8" BFVWDA10-EPDM 10" BFVWDA12-EPDM 12" Cast Iron Body, Stainless Steel Disc, EPDM Liner Pneumatic Single Acting S40 Size DN Face to Face Cast Iron Body, Stainless Steel Disc, EPDM Liner Electric Actuated, High Voltage (85-230V AC/DC) S40 Size DN Face to Face BFVWSA112-EPDM 1.1/2" BFVWSA2-EPDM 2" BFVWSA212-EPDM 2.1/2" BFVWSA3-EPDM 3" BFVWSA4-EPDM 4" BFVWEA112-EPDMHV 1.1/2" BFVWEA2-EPDMHV 2" BFVWEA212-EPDMHV 2.1/2" BFVWEA3-EPDMHV 3" BFVWEA4-EPDMHV 4" BFVWSA5-EPDM 5" BFVWSA6-EPDM 6" BFVWSA8-EPDM 8" BFVWSA10-EPDM 10" BFVWEA5-EPDMHV 5" BFVWEA6-EPDMHV 6" BFVWEA8-EPDMHV 8" BFVWSA12-EPDM 12"

42 9 Actuated Valve Features The valve is suitable for medium pressures on condition that non aggressive fluids are used Working temperature: from -20 C to +150 C for fluids Fluid range: air, water, oil, gas, petroliferous and petrochemical products, vacuum ed ends as per UNI/ISO 7/1 Rp specifications Head of the valve as per ISO 5211 specifications Actuator Features Rotation angle: 90 Temperature from 0 C to +80 C; from -20 C to +80 C with dry air only Air supply: 5,6 bar, maximum working supply 8,4 bar Operating media: dry filtered air, not necessary lubricated. In case of lubricated air, either non detergent oil or NBR-compatible oil must be used Automatic closing in a clockwise direction (for spring return version) Valve Materials 1) Shaft: Brass 2) O-Ring: FKM 3) Gland Nut: Brass 4) Shaft Seal: P.T.F.E. 5) Antifriction Rings: P.T.F.E. 6) Seals: P.T.F.E. 7) Ball: Brass chromium plated 8) Body: Brass 9) ed End: Brass Surface treatment: bright nickel plating NOTE: in spring return version valves are mounted in normally closed position; please specify, if other position are required. Actuators Type SR 15 SR 30 SR 45 Suits DN 10 - DN 25 DN 32 - DN 40 DN 50 Actuated Ball Valve, Nickel Plated Brass Body Single Acting P46 DN BSP A B C D E ØG KV m 3 /h H Weight kg S101H / S101H / S101H / S101H S101H / S101H / S101H

43 Actuated 9 Valve Features The valve is suitable for medium pressures on condition that non aggressive fluids are used Working temperature: from -20 C to +150 C for fluids Fluid range: air, water, oil, gas, petroliferous and petrochemical products, vacuum ed ends as per UNI/ISO 7/1 Rp specifications Head of the valve as per ISO 5211 specifications Actuator Features Rotation angle: 90 Temperature from 0 C to +80 C; from -20 C to +80 C with dry air only Air supply: 5,6 bar, maximum working supply 8,4 bar Operating media: dry filtered air, not necessary lubricated. In case of lubricated air, either non detergent oil or NBR-compatible oil must be used Automatic closing in a clockwise direction (for spring return version) Valve Materials 1) Shaft: Brass 2) O-Ring: FKM 3) Gland Nut: Brass 4) Shaft Seal: P.T.F.E. 5) Antifriction Rings: P.T.F.E. 6) Seals: P.T.F.E. 7) Ball: Brass chromium plated 8) Body: Brass 9) ed End: Brass Surface treatment: bright nickel plating NOTE: in spring return version valves are mounted in normally closed position; please specify, if other position are required. Actuators Type DA 8 DA 15 DA 30 DA 45 DA 90 DA 120 Suits DN 15 DN 20 - DN 25 DN 32 - DN 40 DN 50 DN 65 DN 80 Actuated Ball Valve, Nickel Plated Brass Body Double Acting P46 DN BSP A B C D E ØG KV m 3 /h H Weight kg D101H / , D101H / D101H D101H / D101H / D101H D101H / D101H

44 9 Actuated Valve Features Suitable for medium pressure applications. Working temperature: from -20 C to +150 C for fluids Working pressure: see diagram Fluid range: air, water, oil, gas, petroliferous and petrochemical products, aggressive media. Surface threaded ends as per UNI/ ISO 7/1 Rp specifications NOTE: in spring return version valves are mounted in normally closed position; please specify, if other position are required. Actuator Features Rotation angle: 90 Temperature from 0 C to +80 C; from -20 C to +80 C with dry air only Air supply: 5,6 bar, maximum working supply 8,4 bar Operating media: dry filtered air, not necessary lubricated. In case of lubricated air, either non detergent oil or NBR-compatible oil must be used Automatic closing in a clockwise direction (for spring return version) Valve Materials 1) Shaft: AISI 316 2) Nut holder: AISI 304 3) Lock nut: AISI 304 4) Spring: AISI 301 5) Washer: AISI 304 6) Gland nut ring: AISI 304 7) Static ring: P.T.F.E. 8) End: AISI 316 9) Seals: P.T.F.E. 10) Ball: AISI ) O-Ring: FKM 12) Bottom tight ring: P.T.F.E. 13) Body with female end: AISI ) Top Sealing: P.T.F.E. Actuators Type SR 15 SR 30 SR 45 SR 60 SR 90 Suits DN 10 - DN 15 DN 20 - DN 25 DN 32 DN 40 DN 50 Actuated Ball Valve Stainless Steel Body Single Acting DN A B C D E ØG H Weight P46 BSP kg S401H G3/ S401H G1/ S401H / S401H G S401A G1.1/ S401H G1.1/ S401A G Namur Interface Plate For Actuated Ball P46 To Suit Actuator KBN10008 DA KBN10015 DA KBN17030 DA 30 - DA 45 SR 15 - SR

45 Butterfly 9 Wafer Type Butterfly Valve, Manual EPDM Liner Wafer Type Butterfly Valve, Double Acting, Pneumatically Actuated EPDM Liner P48 DN A B C L375XE L375XE L375XE L375XE L375XE L375XE L375XE P48 DN L H Weight kg Actuator Size D375XE DA D375XE DA D375XE DA D375XE DA D375XE DA D375XE DA D375XE DA Wafer Type Butterfly Valve, Single Acting, Pneumatically Actuated EPDM Liner P48 DN L H Weight kg Actuator Size S375XE SR S375XE SR S375XE SR S375XE SR S375XE SR S375XE SR S375XE SR Lug Type Butterfly Valve, Manual EPDM Liner P48 DN A B C L385XE L385XE L385XE L385XE L385XE L385XE L385XE

46 9 Butterfly Lug Type Butterfly Valve, Double Acting, Pneumatically Actuated EPDM Liner Lug Type Butterfly Valve, Single Acting, Pneumatically Actuated EPDM Liner P48 DN L H Weight kg Actuator Size D385XE DA D385XE DA D385XE DA D385XE DA D385XE DA D385XE DA D385XE DA P48 DN L H Weight kg Actuator Size S385XE DA S385XE DA S385XE DA S385XE DA S385XE DA S385XE DA S385XE DA See page 171 for Namur Interface Solenoid Valve 448

47 Actuated 9 Zeus Angle Seat Valve Bronze Body Water-Haer Free P20 DN Actuator A C D ØE F CH.L. J9SPG G3/8 DN J9SPG G1/2 DN J9SPG G3/4 DN J9SPG G3/4 DN J9SPG G1 DN J9SPG G1 DN J9SPG G1.1/4 DN J9SPG G1.1/2 DN J9SPG G2 DN Zeus Angle Seat Valve Bronze Body with Flow from Above Seat P20 DN Actuator A C D ØE F CH.L. J9CPG G3/8 DN J9CPG G1/2 DN J9CPG G3/4 DN 40** , J9CPG G1 DN J9CPG G1.1/4 DN J9CPG G1.1/2 DN J9CPG G2 DN

48 9 Actuated VIP Actuated Slide A VIP valve (patented by OMAL exclusively) is a proper automatic valve embodying both interception device (between pipe C-D) and control device (A-B). It works thanks to the internal movement of a piston supplied with air. At the end of its stroke (a VIP valve is an ON/OFF valve), the piston presses on the seat seal or moves away from it letting the intercepted fluid pressures discharge on it, the pressure necessary to move the piston is completely independent of the fluid pressure. As a result OMAL has been able to design a light space saving and lasting valve. Its full bore and its improved internal dynamics allow minimum pressure losses, too. Improved fluid dynamics allow minimum pressure losses. See Flow Pressure Diagram. VIP valves can be used in any mounting position. They can be provided with seals in NBR, FKM or EPDM: Control media: Filtered compressed air, not necessarily lubricated. At temperatures from -20 C to 0 C, use dry air. In case of lubricated air, seal compatible oil must be used. Air supply: 3 bar min. - 8 bar max. in Double Acting execution. 4.2 bar min. - 8 bar max. in Spring Return execution. Operating media: Pressure: 10 bar max. Temperature: from -20 C to +80 C (NBR) from -20 C to +150 C (FKM) from -20 C to +150 C (EPDM) Vacuum tightness: 740 Hg VIP Valve, Double Acting Brass with NBR Seals VIP Valve, Single Acting Brass with NBR Seals P47 Bore VDA10003 G3/ VDA10004 G1/ P47 Bore VNC10003 G3/ VNC10004 G1/ VDA10005 G3/ VDA10006 G VDA10007 G1.1/ VDA10008 G1.1/ VDA10009 G VNC10005 G3/ VNC10006 G VNC10007 G1.1/ VNC10008 G1.1/ VNC10009 G