CV-SFS4-PN16 SERIES SLIENT CHECK VALVE, GLOBE TYPE FEATURES SPECIFICATIONS PRODUCT IDENTIFICATION SYSTEM PRODUCT DATA
|
|
|
- Roland Hamilton
- 6 years ago
- Views:
Transcription
1 CV-SFS4-PN16 SERIES SLIENT CHECK VALVE, GLOBE TYPE Silent check function Temperature -10 ~ +120 PRODUCT IDENTIFICATION SYSTEM 2 Disc Ductile iron GGG 40 3 Spring Stainless steel SUS304 4 Bush Bronze 1400 LG2 5 Stem Stainless steel SUS420 6 Ring Cast iron GG25 7 Bolt Stainless steel SUS304 Size Model No. L A B 2 CV-SFS4-PN ½ CV-SFS4-PN CV-SFS4-PN CV-SFS4-PN CV-SFS4-PN CV-SFS4-PN CV-SFS4-PN CV-SFS4-PN CV-SFS4-PN Note: for greater sizes or customized models please contact local sales representatives. HONEYWELL ECC. (TIANJIN) CO. LTD. 1 ECC-FDA-MV01-NOV-2012-V01-EN PRELIMIANRY VERSION
2 SILENT CHECK VALVE GLOBE TYPE LOSS OF HEAD INSTALLATION Warning! all valves shall never be forced to seat by hammering! 1. Align the flanges at both ends with pipe, to make concentric, straight and parallel. 2. The direction of arrow on valve body must be same as flowing direction. In vertical installation the flowing direction must be upwards! 3. Tightening screws diagonally. Do not tighten the bolts forcibly, to avoid damaging flange or valve. 4. Upon valve installed, open the valve, and flush the pipeline thoroughly. HONEYWELL ECC. (TIANJIN) CO. LTD. 2 ECC-FDA-MV01-NOV-2012-V01-EN
3 CV-SWS4-PN16 SERIES SLIENT CHECK VALVE, WAFER TYPE Silent check function Temperature -10 ~ Plug Bronze GGG 40 3 Seat Bronze SUS304 4 Screw Stainless steel 1400 LG2 5 Bush Bronze SUS420 6 Spring Stainless steel GG25 Size Model No. A B Kvs 2 CV-SWS4-PN ½ CV-SWS4-PN CV-SWS4-PN CV-SWS4-PN CV-SWS4-PN CV-SWS4-PN CV-SWS4-PN CV-SWS4-PN CV-SWS4-PN Note: for greater sizes or customized models please contact local sales representatives. HONEYWELL ECC. (TIANJIN) CO. LTD. 3 ECC-FDA-MV01-NOV-2012-V01-EN
4 CV-SFH4-PN16 SERIES CHECK VALVE, HORIZONTAL SWING Bolted bonnet Bronze seat Applicable for large piece flowing through Nominal pressure PN16 Temperature -10 ~ Bolt Carbon steel Q235 2 Name plate Aluminum Commercial 3 Bonnet Cast iron GG 25 4 Gasket Graphite Non asbestos 5 Nut Carbon steel Commercial 6 Side Plug Brass 2874 CZ114 7 Gasket Rubber EPDM 8 Hanger Pin Stainless steel SUS Hanger Ductile iron GGG Disc Cast bronze GG Washer Steel Q Split Pin Stainless steel SUS Seat Ring Cast bronze 1400 LG2 14 Disc Carbon steel Commercial 15 Body Cast iron GG Bolt Carbon steel Q235 Size Model No. L K B E 2 CV-SFH4-PN ½ CV-SFH4-PN CV-SFH4-PN CV-SFH4-PN CV-SFH4-PN CV-SFH4-PN CV-SFH4-PN CV-SFH4-PN CV-SFH4-PN Note: for greater sizes or customized models please contact local sales representatives. HONEYWELL ECC. (TIANJIN) CO. LTD. 4 ECC-FDA-MV01-NOV-2012-V01-EN
5 CV-SWB4-PN16 SERIES CHECK VALVE, BUTTERFLY TYPE Stainless steel disc Temperature -10 ~ Disc Stainless steel SUS Spring Stainless steel SUS Seat Rubber EPDM 5 Stem Stainless steel SUS Washer TEFLON PTFE 7 Bush Bronze 1400 LG2 8 Bolt Stainless steel SUS 304 Size Model No. A C B Weight (Kg) 2 CV-SWB4-PN ½ CV-SWB4-PN CV-SWB4-PN CV-SWB4-PN CV-SWB4-PN CV-SWB4-PN CV-SWB4-PN CV-SWB4-PN CV-SWB4-PN Note: for greater sizes or customized models please contact local sales representatives. HONEYWELL ECC. (TIANJIN) CO. LTD. 5 ECC-FDA-MV01-NOV-2012-V01-EN
6 GV-HFN4-PN16 SERIES GATE VALVE, NON-RISING STEM Stainless Non-rising steel stem disc Solid wedge disc Stainless steel stem Nominal pressure PN16 Nominal Temperature pressure -10 PN16 ~ +120 Flange standard ISO water or neutral liquid Shell Test Temperature -10 ~ +120 Flange standard ISO Wedge Rubberized ductile iron NBR+ GGG40 3 Gasket Rubber EPDM 4 Bonnet Cast Iron GGG 40 5 Stem Stainless steel SUS Gland Housing Cast iron GG 25 7 Handwheel Cast iron GG 25 Size Model No. L D2 H Weight (Kg) 2 GV-HFN4-PN ½ GV-HFN4-PN GV-HFN4-PN GV-HFN4-PN GV-HFN4-PN GV-HFN4-PN GV-HFN4-PN GV-HFN4-PN GV-HFN4-PN Note: for greater sizes or customized models please contact local sales representatives. HONEYWELL ECC. (TIANJIN) CO. LTD. 6 ECC-FDA-MV01-NOV-2012-V01-EN
7 GV-HFR4-PN16 SERIES GATE VALVE, RISING STEM Rising stem Solid wedge disc Stainless steel stem Temperature -10 ~ Wedge Rubberized ductile iron NBR+ GGG40 3 Gasket Rubber EPDM 4 Bonnet Cast Iron GGG 40 5 O-ring Rubber SUS Gland Follower Cast iron GG 25 7 Stem Stainless steel GG 25 8 Bracket Cast iron GG 25 9 Handwheel Cast iron GG 25 Size Model No. L D2 H Weight (Kg) 2 GV-HFR4-PN ½ GV-HFR4-PN GV-HFR4-PN GV-HFR4-PN GV-HFR4-PN GV-HFR4-PN GV-HFR4-PN GV-HFR4-PN GV-HFR4-PN Note: for greater sizes or customized models please contact local sales representatives. HONEYWELL ECC. (TIANJIN) CO. LTD. 7 ECC-FDA-MV01-NOV-2012-V01-EN
8 GL-HFR4-PN16 SERIES GLOBE VALVE, RISING STEM Rising stem Stainless steel stem Temperature -10 ~ Body Cast iron Q235 2 Seat Ring Bronze 1400 LG2 3 Disc Cast iron GG 25 4 Gasket Brass 2874 CZ114 5 Swivel Nut Brass 2874 CZ114 6 Bolts Carbon steel Q235 7 Body Gasket Graphite Non-asbestos 8 Bonnet Cast iron Q235 9 Packing Graphite Non-asbestos 10 Packing Gland Brass 2874 CZ Gland Follower Ductile iron GGG Gland Bolts Carbon steel Q Nuts Carbon steel Q Stem Stainless steel SUS Yoke Bush Bronze 1400 LG2 16 Screws Carbon steel Q235 DIMENSIONS (MM) Size Model No. B K D H L E N-D DN50 GL-HFR4-PN N65 GL-HFR4-PN DN80 GL-HFR4-PN DN100 GL-HFR4-PN DN125 GL-HFR4-PN DN150 GL-HFR4-PN DN200 GL-HFR4-PN DN250 GL-HFR4-PN DN300 GL-HFR4-PN HONEYWELL ECC. (TIANJIN) CO. LTD. 8 ECC-FDA-MV01-NOV-2012-V01-EN
9 YS-SF4-PN16 SERIES Y-STRAINER, CAST IRON Bolted bonnet cover Stainless steel screen Temperature -10 ~ +120 LOSS OF HEAD 2 Screen Stainless steel SUS Gasket Rubber EPDM 4 Bonnet Cast Iron GG 25 HONEYWELL ECC. (TIANJIN) CO. LTD. 9 ECC-FDA-MV01-NOV-2012-V01-EN
10 DIMENSIONS (MM) Size Model No. C K H L B D N-D F DN50 YS-SF4-PN DN65 YS-SF4-PN DN80 YS-SF4-PN DN100 YS-SF4-PN DN125 YS-SF4-PN DN150 YS-SF4-PN DN200 YS-SF4-PN DN250 YS-SF4-PN DN300 YS-SF4-PN Note: for greater sizes or customized models please contact local sales representatives. Automation and Control Solutions Honeywell Environmental & Combustion Controls (Tianjin) Co. Ltd. No. 158, Nan Hai Road Tianjin Economic-Technological Development Area Tianjin, , P.R.C. Phone: Fax: All information subject to change without prior notification! 10 ECC-FDA-MV01-NOV-2012-V01-EN
Cast Iron Valves. Product Information. It s all at Albion
Cast Iron Valves Product Information It s all at Albion ART 77-78 Cast Iron Ball Valve Flanged Ends Flange Mounting PN16 Only ISO 5211 Direct Mount (Not 200mm) Art 77/78 Plated Brass/Stainless Ball BS
Cast-Iron Valves G101 DI BUTTERFLY VALVE LEVER... 2 G401 CI GLOBE VALVE CL G403 CI GLOBE VALVE PN G103 DI BUTTERFLY VALVE GEAR...
Cast-Iron Valves PAGE G101 DI BUTTERFLY VALVE LEVER.... 2 PAGE G401 CI GLOBE VALVE CL125.... 9 G103 DI BUTTERFLY VALVE GEAR.... 3 G403 CI GLOBE VALVE PN16.... 10 G201 CI Y STRAINER CL125.... 4 G501 CI
flowit by Fig. FTBGW-20 Bronze Gate Valve, Non-Rising Stem BS 5154 PN20 Material Specifications Dimensions (mm)
flowit flowit by Bronze Gate Valve, Non-Rising Stem BS 5154 PN20 Fig. FTBGW-20 Designed to BS 5154 Pressure Rating: PN20 Threaded Bonnet End connection: BS21 Taper Threaded (ISO 7) / BS EN10226-2 Shell
BS 1452 Gr Gr. 420/ Gr. 420/ AB2 304 C C S S S S16. E mm
WAFER TYPE BUTTERFY VAVE SPECIFICATION FOR BS EN 1092-2 PN10 / PN16 FANGE MOUNTING FACE-TO-FACE DIMENSION TO ISO 5752 / BS 5155 / BS EN 593 EVER / WORM GEAR OPERATOR PRESSURE / TEMPERATURE RATINGS BFV-WB
Valves Range RVRX - Resilient Seated Gate Valve PN16 Flange
Valves Range RVRX - Resilient Seated Gate Valve PN16 Flange No Component Material 1 Body Ductile iron GGG40 2 Wedge DI Fully Vulcanised EPDM 3 Wedge Nut Brass 4 Stem SS420 5 Bolt Q235+Zinc 6 Gasket EPDM
Hattersley Newman Hender Ltd
Product Guide Quality Valves from Hattersley WHEN IT REALLY COUNTS, YOU CAN DEPEND ON HATTERSLEY Hattersley Newman Hender is one of the world s premier manufacturers of cast iron, ductile iron and copper
VALFONTA PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS
PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS The S1 model is self-operated bellows sealed pressure excess valve. This series of
VALVES 5
info@ayvaz.com www.ayvaz.com GLOBE VALVES GV-16, GV-25, GV-40 GV-16 GV-25 GV-40 GG-25 Cast Iron GSC-25 Cast Steel GSC-25 Cast Steel Seat Stainless Steel AISI 304 Stainless Steel AISI 304 Stainless Steel
BUTTERFLY VALVE - WAFER FAF 3500
PRODUCTION STANDARDS DN40 DN600 PN 6-10-16 CLASS 150 Design EN 593 Connection Wafer Type ISO 7005-1 EN 1092-1 Face to Face EN 558 Series 20 Marking EN 19 Tests EN 12266-1 Corrosion Protection Electrostatic
Concentric butterfly valves
Lug Between flanges PN10/16 1135 Lever Disc GGG40 nickel plated / Seat EPDM.../10: flanges PN10.../16: flanges PN16 DN 40 50 65 80 100 125 150 200/10 200/16 250/10 250/16 300/10 300/16 16 16 16 16 16 16
Stainless Steel / Iron Valve ISO 9001
CAST IRON GATE VALVE CLASS 125 NON-RISING STEM. (N.R.S.) STEM: SS410 (BRASS / SS304) MODEL: CI-12N (CI-12N/CI-2NS) CAST IRON GATE VALVE CLASS 125 OUTSIDE SCREW AND YOKE. STEM: SS410 (BRASS / SS304) MODEL:
LATEST ARRIVALS CATALOGUE STOCK
LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL
The GACHOT V501 gate valve offer the most possible reliability for process and critical applications
The GACHOT V501 gate valve offer the most possible reliability for process and critical applications Features Construction complies with NF EN 1984 Straight-through flow and full port Cast body (investment
CLASS 400 FORGED BRASS BALL VALVE
CLASS 400 FORGED BRASS BALL VALVE FIG. 214 Screwed body cap, PTFE seats, Blowout-proof stem. Screwed ends to BS 21. Nickel plated body. Chrome plated ball. UNI-FLO NYLON BALL VALVES FIG. 214NS/NB Features:
Valves for building. Y-strainers... page 204 PVC valves Ball valves... page 204 Butterfly valve... page 204 Ball check valve...
Valves for building Ball valves PN25/20... page 194 PN30/20... page 195 PN40/30 - Lead-free brass... page 196 Valve for gas... page 197 Stem extension valves... page 197 3 way valves... page 197 Mini valves...
OPTIMAL VALVE SOLUTIONS FOR OIL AND GAS PLANTS
AVK FLOW CONTROL OPTIMAL VALVE SOLUTIONS FOR OIL AND GAS PLANTS InterApp World Valve Wouter Witzel TEC artec AVK 1 2 AVK FLOW CONTROL l OIL & GAS PLANTS CONTENT: AVK FLOW CONTROL 4-5 OFFSHORE PRODUCTION
Valves for building. Y-strainers... page 272 PVC valves Ball valves... page 272 Butterfly valves... page 272 Ball check valves...
Valves for building Ball valves PN25/20... page 262 PN30/20...pages 262 to 263 PN40/30 - Lead-free brass... page 264 Valve for gas... page 265 Stem extension valves... page 265 3 way valves... page 265
R o L. BUTTERFLY VALVE of carbon steel with flanges series BLUE LINE. Operation. Edition
of carbon steel 31500 series C ont R o L Operation Edition 03-0-009 The welded butterfly valve 31500 is used for example in district heating, district cooling and industry. It can be used as an on-off
Approved Branded Traceable Fire Protection & Waterworks Valves
Approved Branded Traceable Fire Protection & Waterworks Valves (800) 766-0076 www.smithcooper.com Los Angeles, CA Atlanta, GA Vancouver, WA Chicago, IL AWWA C515 Compliant CONSIDER Your Options Tamper
Tilting-disc Check Valves Short Body
Tilting-disc Check Valves Short Body Tilting-disc Check Valves, Short Body to DIN 3202 Series F4 for liquids and gases, PN 10 - PN 40, DN 150 - DN 2000 Short Body Tilting-disc Check Valves More than 40
SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
SECTION 220523 - GENERAL-DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
CONTENTS. Bronze Ball Valve (Threaded) 1. Bronze NRS Gate Valve (Threaded) 2. Bronze RS Gate Valve (Threaded) 3. Bronze Swing Check Valve (Threaded) 4
CONTENTS Bronze Ball Valve (Threaded) 1 Bronze NRS Gate Valve (Threaded) 2 Bronze RS Gate Valve (Threaded) 3 Bronze Swing Check Valve (Threaded) 4 Bronze Globe Valve (Threaded) 5 Bronze Y - Strainer (Threaded)
VALFONTA SELF-ACTING PRESSURE REDUCING VALVE M1
SELF-ACTING PRESSURE REDUCING VALVE M1 M1-15A-ENG PRESSURE REDUCING VALVE MODEL M1 VALFONTA MAIN CHARACTERISTICS The M1 model is self-operated bellows sealed pressure reducing valve. This series of regulators
KVC VALVES AND PEX FITTINGS
KVC VALVES AND PEX FITTINGS 2011 KVC VALVES & PEX FITTINGS CATALOGUE 2 P a g e Table of contents 1. Cast Steel Valves..4 FIG. 272-CS-15 ( Gate ).....5 FIG. 272-CS-300 ( Gate )......6 FIG. 272-CS-600 (
Established in 1982, Modentic Industrial Corporation is involved in the world of stainless steel valves & fittings selling.
Modentic Industrial Corp. ISO 9001 Certified. Established in 1982, Modentic Industrial Corporation is involved in the world of stainless steel valves & fittings selling. Contents A view of valve process
ALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN
BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric
Motorized Butterfly Valve Actuated Wafer type butterfly valves
Motorized Butterfly Valve Actuated Wafer type butterfly valves FEATURES PRODUCT DATA Wide size range (DN 50 DN600) For On-Off or Modulating Control Manual override non-clutch design. Manual operation can
Motorized Butterfly Valve
Motorized Butterfly Valve Actuated butterfly valves PRODUCT DATA FEATURES Wide size range (DN 50 500) For On-Off Control with feedback signal Manual override Hand-Wheel design. Manual operation can be
BUTTERFLY VALVE WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) and 41001
Operation WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) 41101 and 41001 C ont R o L Description Edition Wafer type butterfly valve 411 (410) series are used in industrial
PRZEPUSTNICE. B-599 Centric butterfly valve PN16 from -10ºC to +130ºС DN32 DN200 PN-EN 2-3
BUTTERFLY VALVES PRZEPUSTNICE TYPE DESCRIPTION NOMINAL PRESSURE TEMPERATURE DIAMETER STANDARD PAGE B-599 Centric butterfly valve PN16 from -10ºC to +130ºС DN32 DN200 PN-EN 2-3 B-099 Centric butterfly valve
Wato Product Range includes:
europevalves Wato is an innovative engineering and production company that offers products and services for water supply and sewerage systems with distributors in the whole world. With its products and
SECTION GENERAL-DUTY VALVES FOR HVAC PIPING. A. Contents of Division 23, HVAC and Division 01, General Requirements apply to this Section.
SECTION 23 05 23 PART 1 - GENERAL 1.1 SUMMARY A. Work Included: 1. Gate Valves 2. Balancing Valves 3. Ball Valves 4. Butterfly Valves 5. Swing Check Valves 1.2 RELATED SECTIONS A. Contents of Division
Approved. Size L H. 3" (76mm) 9-1/2" (241mm) 5-51/64" (147mm) 46. 4" (102mm) 11-1/2" (292mm) 6-45/64" (170mm) 81
pproved. Model: SD-NRV200CV Flanged Ends The Flanged End Check Valves are made of Iron Body, Bolted Bonnet and Horizontal Swing, painted with standard color. Epoxy coated inside and outside to WW C550
ND = Double Door, SEAT NBR ES = Center Guided Silent Check / EPDM NS = Center Guided Silent Check / NBR. Butterfly Valves, Seat in body.
MAS-WDI-1118 MAS W-Series Water Works / Fire Protection Valves ORDERING CODES Series XX = Valve Type X = CWP XX = Design Type XX = End Connection W = AWWA/UL/FM, 10 = Gate Valve A = 300 CWP RS = Rising
Globe valves Shut-off check valve 200 AE/BE PN DN Globe valves Lift check valve 240 MT PN DN 10-50
Globe valves Shut-off check valve 200 AE/BE PN 10-160 DN 10-50 Globe valves Lift check valve 240 MT PN 10-160 DN 10-50 Admissible operating pressure [bar] at design temperature [ C] 1) Material PN -200-60
Materials : Carbon steel or stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 50 to 600 mm Between PN25 or PN16 flanges 29 C + 210 C Max Pressure : 25 Bars Specifications : Double eccentric Wafer type Fire safe according to ISO
Swing Check Valves - Series 41
Tender Text Data Sheets Swing Check Valves - Series 41 The swing check valves are typically installed after a pump unit in order to prevent the water from flowing back through the pump, when it stops.
MADE OF STAINLESS...
MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 50 to 600 mm ( NPS 2" to 24" ) Between Class 150 (PN20) flanges 29 C + 210 C Max Pressure : 20 Bars Specifications : Double eccentric
Brown University Revised August 3, 2012 Facilities Design & Construction Standards SECTION HVAC&R VALVES
SECTION 23 05 23 HVAC&R VALVES PART 1 - GENERAL 1.1 SUMMARY: A. Section includes valves for building services piping. 1.2 GENERAL VALVE APPLICATION REQUIREMENTS: A. Provide valve handle extensions that
Gasket
CAST STAINLESS STEEL GATE VALVES API 603 INTEGRAL SEAT, 1 2 1 1 2", (15 40 mm) CLASS 800 GATE VALVES FULL PORT 1 2 1 1 2", (15 40 mm) THREAE OR SOCKET WEL, ASME CLASS 800 Precision High Quality Investment
SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
SUNY GENESEO 220523-1 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
Dual Plate Check Valve
Dual Plate Check Valve Belgicast Model C Ruber-Check Dual plate check valve Wafer type 40/1200 PN 10/16/25/40 Features: Dual plate check valve with soft wafer type seat for fitting between flanges. For
BS 5163 Resilient Wedge Gate Valve
BS 516 Resilient Wedge Gate Valve BS 516 Flanged Resilient OS&Y Gate Valve, Type A, (XZ41X), /16, Gate valves serve to cut the medium flow in the piping system, widely used in the field of potable water,
RESILIENT SEATED GATE VALVE FAF 6200
PRODUCTION STANDARTS DN40 DN800 PN 10-16 Design EN 1171 / EN 1074 Connection Face to Face EN 1092-2 / ISO 7005-2 - Flanged EN 558 Series 15 / DIN 3202 F5 Marking EN 19 Tests EN 12266-1 Corrosion Protection
AVK TOTAL CONTROL INSIDE BUILDINGS GENERAL VALVES FOR BUILDING
AVK TOTAL CONTROL INSIDE BUILDINGS GENERAL VALVES FOR BUILDING SERVICE MEMBER OF THE GROUP GATE VALVE RESILIENT SEATED FULLY VULCANIZED WEDGE Product series: S02, S21, S06, S15, S55 Rising stem/non rising
Motorized Butterfly Valve
Motorized Butterfly Valve Actuated butterfly valves FEATURES PRODUCT DATA Wide size range (DN 50 DN600 for PN16 type, DN50 DN350 for PN25 type) For On-Off or Modulating Control Manual override non-clutch
Valves. BS Standard JINAN MEIDE CASTING CO., LTD.
Valves BS Standard JINAN MEIDE CASTING CO., LTD. Resilient Wedge Gate Valve XZ81X Grooved Resilient OS&Y Gate Valve Page 11 XZ51X Flanged x Grooved Resilient OS&Y Gate Valve Page 12 Z85X Grooved Resilient
HELYON PRESSURE REDUCING VALVE MODEL M1
PRESSURE REDUCING VALVE MODEL - 5 Chemin du Jubin 69570 DARDILLY MAIN CHARACTERISTICS The model is self-operated bellows sealed pressure reducing valve. This series of regulators is suitable for steam,
PNEUMATIC ON OFF GLOBE VALVE
PNEUMATIC ON OFF GLOBE VALVE Model No. AGE0 SERIES s Bonnet -way globe valve, -way globe valve 1A(1/") ~ 00A(1") JIS 10K~K, ANSI 10#~900#, PN10~, etc. FF, RF, BW, SW Plain bonnet: -17 ~0 Extended bonnet:
Union County Vocational - Technical Schools Scotch Plains, New Jersey
SECTION 220523 - GENERAL-DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Brass ball valves. 2. Iron swing check valves. 3. Iron gate valves. 4. Iron globe valves. B.
Sealing Test Pressure (MPa)
TRIPLE ECCENTRIC BUTTERFLY VALVE Triple Eccentric Butterfly Valve provides a tight shut-off. This geometry ensures that the disc seal contacts the body seat only at the final shut-off position without
HOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The C model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). makes it ideal for use
Gate valves Gate valve 700 HJ/JJ (GA PN 10-40) PN DN
Gate valves Gate valve 700 HJ/JJ (GA PN 10-40) PN 10-100 DN 50-150 Admissible operating pressure [bar] at design temperature [ C] Material PN -60-10 20 100 150 200 250 300 350 400 410 420 430 440 450 460
Lead-free valves for potable water systems. Rev 02/17
Lead-free valves for potable water systems. Rev 02/17 UltraPure for purer water. The new standard. Senate law S.3874 was passed January 4, 2011 and is effective January 4, 2014. The law regulates lead
KNIFE GATE VALVE Product Ref. : KG02W/KG02L
General Description Model KG02 is a bidirectional knife gate valve suitable for most industrial application cases. With one piece body design, it combines robust and economy giving best cost effective
SUBMITTAL PACKAGE FIRE PROTECTION VALVES
SUBMITTAL PACKAGE FIRE PROTECTION VALVES Butterfly Valves Ductile Iron Grooved...pg 2-5 Grooved Check Valves...pg 6-8 OS&Y Valves...pg 9-12 ARGCO.com 800-854-1015 Updated 2/27/2017 ARGCO GROOVED BUTTERFLY
R o L. BUTTERFLY VALVE of carbon steel with welded ends 313 -series BLUE LINE. Description
of carbon steel 313 -series C ont R o L Description Edition 23-07-2015 The welded butterfly valve 313 is specially designed for district heating and district cooling. It can be used as an on-off or control
Materials : Carbon steel or stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 50 to 600 mm Between PN25 flanges - 29 C + 210 C Max Pressure : 25 Bars Specifications : Double eccentric Wafer type Fire safe according to ISO 10497
BUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
SECTION GENERAL-DUTY VALVES FOR HVAC. A. Section includes valves for building services piping.
SECTION 23 05 23 GENERAL-DUTY VALVES FOR HVAC PART 1 - GENERAL 1.1 SUMMARY A. Section includes valves for building services piping. 1.2 REFERENCES A. AGA Z21.22 (American Gas Association) - Relief Valves
ACE VALVE COMPANY LIMITED
Gate & Globe Valves ACE COMPANY LIMITED ttp://www.acevalve.co.kr Mangdeokri, Juchonmyun, Gimhae, Gyeongnam, Korea. TEL +000 FAX +0~ Email acevalve@acevalve.co.kr omepage www.acevalve.co.kr 0.0. ACE CATALOG
Maintenance-free metallic seat shut-off globe valves
Type leaflet 7150.1/5-10 BOA R -H Maintenance-free metallic seat shut-off globe valves with bellows flanged to new European standard 1092-2 type 21 Grey cast iron PN 16 DN 15-300 Nodular cast iron PN 16
Industrial Bronze and Iron Price List
Industrial Bronze and Iron Price List TABLE OF CONTENTS IND-0217 Effective: February 1, 2017 Revised: 12/07/17 Suggested list prices are subject to change without notification. Visit our Website for the
Industrial Bronze and Iron Price List
Industrial Bronze and Iron Price List TABLE OF CONTENTS IND-0718 Effective: July 2, 2018 Revised: 08/06/2018 Suggested list prices are subject to change without notification. Visit our Website for the
Industrial Bronze and Iron Price List
Industrial Bronze and Iron Price List IND-0318 Effective: March 1, 2018 Revised: 08/06/2018 Suggested list prices are subject to change without notification. Visit our Website for the most up-to-date product
Industrial Bronze and Iron Price List
Industrial Bronze and Iron Price List IND-0718 Effective: July 2, 2018 Revised: 09/24/2018 Suggested list prices are subject to change without notification. Visit our Website for the most up-to-date product
Michigan State University Construction Standards. GENERAL-DUTY VALVES FOR HVAC PIPING Page
Page 230523-1 Copyright 2005 by The American Institute of Architects (AIA) Exclusively published and distributed by Architectural Computer Services, Inc. (ARCOM) for the AIA Modified by MSU Physical Plant
Valve Series V2001 Three-way Valve Type 3323
Valve Series V2001 Three-way Valve Type 3323 Fig. 1 Type 3323 Valve with mounted rod-type yoke (partial view) Edition January 1999 Mounting and operating instructions E 8113/8114 EN 1. Design and principle
I N F L O W S Y S T E M S VALVULA DE RETENCIÓN
PROUC TOS Y SOUCIONES EN REES E FUIOS PROUCTS AN SOUTIONS I N F O W S Y S T E M S VAVUA E RETENCIÓN CHECK VAVE Index 0 0 0 0 07 08 09 0 7 8 0 Features of ual Plate R wafer dual plate check valve R0 class
CAST STEEL GATE VALVE
CAST STEEL GATE VALVE DESIGN CHARACTERISTICS OF API00 CAST STEEL GATE VALVE The design of thrust bearing makes valve opened easily and flexibly. Handwheel Nut Handwheel Stem Nut Retainer Stem Nut Lubricating
Iron Check Valves Illustrated Index
Iron Check Valves Illustrated Index Iron Body Swing Check Valve Bronze Mounted or All Iron 125 lb. SWP 200 lb. CWP Iron Body Swing Check Valve Bronze Mounted 250 lb. SWP 500 lb. CWP Iron Body Silent Check
HOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the
Soft sealing gate valves F4-F5 PN16. TYPE 02400/BV Soft sealing gate valve F4-F5 PN16
SLES SERVICE +8 (0)7 6 info@econosto.fi TYPE 000 DN0-0 TYPE 000 DN0-00 Soft sealing gate valves Nominal diameter options (DN) 0-00 Nominal pressure options (PN) 6 TYPE 000/BV-0-7 Soft sealing gate valve
BUTTERFLY VALVE WAFER TYPE of carbon steel ( ) series
Operation WAFER TYPE of carbon steel 1100 (1000-100) series C ont R o L Operation Edition 0-0-009 Wafer type butterfly valve 1100 (1000 100) series is used in industrial pipelines for demanding on-off
Type 441 DIN 442 DIN. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units
Type 441 DIN 442 DIN Flanged Safety Relief Valves spring loaded US Units Facts The-Safety-Valve.com LWN 462.02-E 462.01-D Conventional design 40 Cap H2 18 Adjusting screw 19 Lock nut 16 Upper spring plate
Gas. VAG EKO plus Gate Valve resilient-seated - short face-to-face length PN 10/16 - DN KAT-A 1032-F4-G
Gas VAG EKO plus Gate Valve resilient-seated - short face-to-face length Product characteristics and benefits Resilient seated in accordance with EN 1377 (IN 3352 - A) Face-to-face length acc. to EN 55-1,
High-pressure shut-off globe valve V30 High-pressure shut-off globe valve with control cone V40 PN , DN , T max : 550 C
High-pressure shut-off globe valve V30 High-pressure shut-off globe valve with control cone V40 PN 63-160, DN 50 150, T max : 550 C Shut-off globe valve (series V30) or shut-off globe valve with control
SECTION COMMON WORK RESULTS FOR FIRE SUPPRESSION. A. Pipe, fittings, valves, and connections for sprinkler systems.
SECTION 210500 - COMMON WORK RESULTS FOR FIRE SUPPRESSION PART 1 GENERAL 1.1 SECTION INCLUDES A. Pipe, fittings, valves, and connections for sprinkler systems. 1.2 RELATED REQUIREMENTS A. Section 099000
Maintenance-free metal-seated globe valves. Grey cast iron PN 16 DN Nodular cast iron PN 16 DN Nodular cast iron PN 25 DN
Type Series Booklet 7150.1/9-10 BOA -H Maintenance-free metal-seated globe valves with bellows Grey cast iron PN 16 DN 15-300 Nodular cast iron PN 16 DN 15-350 Nodular cast iron PN 25 DN 15-150 Applications
Pneumatic Butterfly Valve Type 3335 / AT
Pneumatic Butterfly Valve Type 3335 / AT Application Tight closing butterfly valve for process engineering and plants with industrial requirements DN 50 to DN 300 2 to 12 Nominal pressure PN 10 and PN
MADE OF STAINLESS... Certificate 3.1
MADE OF STAINLESS... Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 300 Between flanges PN10-10 C + 90 C Max Pressure : 10 Bars up to DN 200 Specifications : Rising rotating
Materials : Cast iron or Stainless steel
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 800 Between flanges PN10-10 C for NBR seat ( -15 C for EPDM ) + 90 C for NBR seat ( + 110 C for EPDM ) Max Pressure : 10 Bars
Type / Material code Body* Disc Stem Lining**
Design butterfly valve is designed with lug or flange connection. Lug connection in dimensions DN 32-300, flange connecton DN 300-1000. is available in pressure ratings PN 10 /16 according to dimension.
Michigan State University Construction Standards. GENERAL-DUTY VALVES FOR PLUMBING PIPING Page
Page 220523-1 SECTION 220523 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
Wafer, Semi Lug, Lug and Flanged Type
Year : Wafer, Semi Lug, Lug and Flanged Type Page 1 Year : Specification Description : GVC concentric rubber lined butterfly valves suitable for bi-directional flow and bubble tight shut-off at full rated
WAFER BUTTERFLY VALVE
WAFER BUTTERFLY VALVE model 1123 Size: DN 32/40 to DN 1200 Ends: Between flanges PN 10/16, Class 150 up to DN 600 Min Temperature: -10 C Max temperature: +110 C (130 C temporarily) Max pressure: 16 Bars
MADE OF STAINLESS... Certificate 3.1
MADE OF STAINLESS... Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 32/40 to DN 1200 Between flanges PN6,PN10/16,Class 150,JIS10K* -10 C + 110 C ( 130 C temporarily ) Max Pressure
Brass, Bronze, Iron and Stainless Steel Valves
Price Schedule June 1, 2011 Supersedes BIV-01-11 07 Brass, Bronze, Iron and Stainless Steel Valves ASTM B283 FORGED BRASS SCREW-IN BONNET NON-RISING STEM SOLID WEDGE DISC 125 WSP/200 WOG BRONZE GATE VALVES
1.2 REFERENCES.1 American National Standards Institute (ANSI)/ American Society of Mechanical Engineers (ASME)
Issued 2005/06/01 Section 15111 Valves Bronze Page 1 of 6 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01355 Waste Management and Disposal 1.2 REFERENCES.1 American National Standards Institute (ANSI)/
CHECK VALVES. MOUNTING: - flow direction marked with arrow on body; - mounting position in conformity with the technical sheet recommendation.
CHECK VALVES RR page 1 R MAIN APPLICATIONS: Transport and distribution of : - cold and hot industrial water; - saturated vapours; - petroleum products; on condition that the compatibility regarding the
TEL: Version: KW2
WWW.KLAMBON.COM 1 Page Klambon Water is a wholly owned subsidiary of West Rand Engineering (WRE), we are suppliers of valves, fittings and related products to all industries and our service extends to
CONTENTS. Double Flow Measurement Device 1. Fixed Orifice Double Regulating Valve 3. Variable Orifice Double Regulating Valve 7
CONTENTS Double Flow Measurement Device 1 Fixed Orifice Double Regulating Valve 3 Variable Orifice Double Regulating Valve 7 Flow Measurement Graphs for Fixed Orifice Devices 9 for Variable Orifice Devices
BUTTERFLY VALVE VF-7 Series
BUTTERFLY VALVE VF-7 Series CENTRIC, RUBBER SEATED LEVER GEAR PNEUMATIC - ELECTRIC OPERATED ALLOWABLE PRESSURE DN 40 300mm : 16 bar DN 350 1200mm : 10 bar INVESTMENT CASTING STAINLESS STEEL BODY 2 12 (50mm
HYDRAULIC CONTROL VALVES
HYDRAULIC CONTROL VALVES The automatic control valves are diaphragm valves designed to provide hydraulically driven solutions to pressure, flow and level control applications. Features: Main valve uses
SECTION VALVES
PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions Specification Sections, apply to this Section. B. Related Sections:
Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE
Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE The B model knife gate is a bi-directional wafer valve designed for media with high consistency. The double seat design assures a non-clogging
Stainless Steel Valves
Stainless Steel Valves A-261T Y-Strainer screwed end, PN40, PSI800 Investment casting body Maximum working temperature 230 C The end-to-end length conforms to DIN 3202, Part 4. M8series (PN40) Thread ends
Manufacturer of Industrial Valves a n d R e l e v a n t E q u i p m e n t. Tilting Disk Check Valves with Counter Weight.
Manufacturer of Industrial Valves a n d R e l e v a n t E q u i p m e n t Tilting Disk Check Valves www.mirabvalves.com TiltingDisc Check Valves Size: DN 100 1 mm Pressure: PN 10 40 bar Face to face:
WAFER STYLE KNIFE GATE VALVE
MODEL WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut
Uniwat. Resilient Seated Gate Valves
Uniwat Resilient Seated Gate Valves www.comeval.es Resilent Seated Gate Valves - UNIWAT 504/507 Copyright COMEVAL VALVE SYSTEMS - Data subject to revision - Regularly updated data on www.comeval.es - DS01