Needle and Butterfly Valves

Size: px
Start display at page:

Download "Needle and Butterfly Valves"

Transcription

1 Needle Valve In-Line Right-Angled Drain Valve 0562 BSPP/Metric 0563 NPT Venting Pressure Gauge Valve 0627 BSPP Pressure Relief Valve 0630 BSPP Stainless Steel Needle Valve In-Line 0591 Page 6-41 Butterfly Valve In-Line 4602 Page

2 Needle Valves Parker Legris compact needle valves can be installed in any system and are designed for applications requiring accurate leak-free fluid control and excellent service life. Product Advantages Robust and Easy--Use Wide Range Accurate flow control orged brass for improved long-term mechanical strength Robust stem for good operational reliability orrosion resistance Two materials (nickel-plated brass and stainless steel) suitable for many applications Numerous valve and safety accessory configurations Pneumatics Water ircuits Machine Tools Rubber Industry Packaging Textile Applications Technical haracteristics Stainless Steel omponent Materials ompatible luids ompressed air, water, industrial fluids, etc. Other fluids: contact us Many fluids Lever: zamak, nickel-plated brass or 316L stainless steel (0591) Pressure bar bar Stem nut: nickel-plated brass or 316L stainless steel (0591) Locking nut: nickel-plated brass or 316L stainless steel (0591) Temperature (except model 0510) Top packing washer: brass or 316L stainless steel (0591) Needle: nickel-plated brass or 316L stainless steel (0591) Tightening Torques Threads G1/8 G1/4 G3/8 G1/2 dan.m Reliable performance is dependent upon the type of fluid conveyed Body: nickel-plated shot-blasted brass or stainless steel (0591) Silicone-free Botm packing washer: mineral fibre Regulations DI: 97/23/E (module PED A - diameters greater than 25 mm) DI: 2006/42/E (Machinery Directive) DI: 2002/95/E (RoHS) RG: 1907/2006 (REAH) 6-38

3 Needle Valves 0502 In-Line Needle Valve, emale BSPP Thread E H H max J L/2 kg G1/ G1/ G3/ In-Line Needle Valve, Male/emale BSPP Thread E E1 H H max J L kg G1/ G1/ G3/ In-Line Needle Valve with ompression onnections ØD L/2 kg 6 M10x M12x M16x The needle is sealed by an O-ring. Maximum operating pressure: Ø4: 100 bar, Ø5: 60 bar temperature: Tightening rques: please refer the ompression ittings chapter of this catalogue Right-Angle Needle Valve, emale BSPP Thread E H1 J L kg G1/ G1/ Right-Angle Needle Valve, Male/emale BSPP Thread E E1 H1 J L kg G1/ G1/ G3/ G1/

4 Needle Valve s 0562 Needle Drain Valve, Male BSPP and Metric Thread E kg M10x G1/ G1/ Needle Drain Valve, Male NPT Thread kg NPT1/ Aumatic Vent Pressure Gauge Valve, emale BSPP Thread, NBR H K L kg G1/ Pressure: 10 bar This isolating valve is used connect a pressure gauge a circuit. Resetting the lever isolates and vents the gauge. A locking pin can be used enable the gauge be fitted permanently Pressure Relief Valve, Male BSPP Thread E H kg G1/ This valve is delivered without calibration, but can be adjusted by inserting metal washers in the hexagon (). 6-40

5 Stainless Steel Needle Valves 0591 Needle Valve, emale BSPP Thread Stainless steel 316L, PTE H1 L L1 kg L1 G1/ G1/ G3/ G1/ H H1 L 6-41

6 Butterfly Valves In these robust valves, the internal component used shut off the flow is a segment of a sphere. This allows frequent operation with very low rque, no fluid retention areas and therefore excellent mechanical performance. Product Advantages ompact & Abrasion- Resistant Excellent with abrasive fluids (including solid particles) luid flow direction marked for greater safety (uni-directional) Smooth operation an be easily adapted for use with auxiliary actuars More compact than a ball valve with equivalent nominal diameter Simple and efficient design for a long service life Painting & Printing Machine Tools Pneumatics Powder onveyance Plumbing Rubber Industry Petrochemical Applications Technical haracteristics ompatible luids ompressed air, industrial gases, water, cutting oils, hydraulic oils, fuel oil, fuel, etc. omponent Materials Pressure 0 16 bar Stem: brass Lever: zamak, black epoxy paint Temperature Body: nickel-plated shot-blasted brass Reliable performance is dependent upon the type of fluid conveyed. lap: stainless steel O-ring: NBR Silicone-free Regulations DI: 97/23/E (module PED A - diameters greater than 25 mm) DI: 2006/42/E (Machinery Directive) DI: 2002/95/E (RoHS) RG: 1907/2006 (REAH) 6-42

7 Butterfly Valves /2 Butterfly Shut-Off Valve, emale BSPP Thread, NBR E H L M kg G1/ G3/ G1/ G3/ G Black epoxy-coated zamak handle 6-43

Seal: NBR. Silicone-free. Regulations. DI: 2002/95/EC (RoHS) RG: 1907/2006 (REACH) DI: 97/23/EC (PED)

Seal: NBR. Silicone-free. Regulations. DI: 2002/95/EC (RoHS) RG: 1907/2006 (REACH) DI: 97/23/EC (PED) Non-Return Valves Non-return valves allow compressed air to flow in one direction and prevent it from flowing in the other. Fitted upstream of the circuit to be protected, they provide total protection.

More information

Function Fittings. Flow Control Regulators. Piloted Function Fittings. Non-Return Valves. LIQUIfit Pressure Fittings. Other Function Fittings

Function Fittings. Flow Control Regulators. Piloted Function Fittings. Non-Return Valves. LIQUIfit Pressure Fittings. Other Function Fittings Flow Control Regulators Piloted Non-Return Valves LIQUIfit Pressure Fittings Other Silencers Flow Control Regulators (P. 4-6) Blocking Fittings (P. 4-36) Piloted Non-Return Valves (P. 4-38) Function:

More information

LF 3600 Push-In Fittings Range

LF 3600 Push-In Fittings Range LF 300 Push-In Fittings Range Stud Fittings Straights 375 BSPT Page 1-97 301 BSPP/Metric Page 1-97 31 Metric Page 1-97 31 BSPP/Metric Page 1-9 321 BSPT Page 1-9 331 BSPP/Metric Page 1-9 300 Page 1-9 Push-In

More information

LF 3800/LF 3900 Push-In Fittings Range

LF 3800/LF 3900 Push-In Fittings Range LF 300/LF 3900 Push-In Fittings Range Stud Fittings Straights 305 3905 BSPT Page 1-79 305 Page 1-79 301 3901 BSPP/Metric Page 1-79 321 3921 BSPT Page 1-0 321 3921 Page 1-0 331 3931 BSPP/Metric Page 1-0

More information

Function Fittings. Flow Control Regulators. Piloted Function Fittings. Non-Return Valves. Pressure Fittings. Other Function Fittings.

Function Fittings. Flow Control Regulators. Piloted Function Fittings. Non-Return Valves. Pressure Fittings. Other Function Fittings. Function Fittings Flow Control Regulators Piloted Function Fittings Non-Return Valves Pressure Fittings Other Function Fittings Silencers Function Fittings 4-3 Function Fittings Flow Control Regulators

More information

LF 3600 Push-In Fittings

LF 3600 Push-In Fittings LF 300 In order to meet your technical and environment requirements, Parker Legris designed this range of metal fittings, offering robustness, reliability and resistance to industrial fluids for the most

More information

LIQUIfit Push-In Fittings with Metal Adaptors

LIQUIfit Push-In Fittings with Metal Adaptors LIQUIfit Push-In Fittings with Metal Adaptors The LIQUIfit range now benefits from a range extension of metal adaptors designed for liquid transfer applications. These fittings ensure reliable and compact

More information

Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD USA web:

Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD USA   web: Push-In Fittings LF 3000 LF 3200: 3 mm LIQUIfit LF 300 LF 300/ LF 3900 LF 0 PARKER LEGRIS Industrial Connector Systems Products are available from: MARYLAND METRICS P.O. Box 21 Owings Mills, MD 21117 USA

More information

Industrial Valves. Ball Valves LIQUIfit Needle and Butterfly Valves Axial Valves

Industrial Valves. Ball Valves LIQUIfit Needle and Butterfly Valves Axial Valves Industrial Valves Ball Valves LIQUIfit Needle and Butterfly Valves Axial Valves Industrial Valves Industrial Valves Ball Valves, Universal Series (P. 6-8) Ball Valves, Universal Series, Vented (P. 6-13)

More information

Brass Compression Fitting Range

Brass Compression Fitting Range Compression Fitting Range Fittings Stud Fittings 0105 BSPT Page 5-9 0105 NPT Page 5-9 0101 BSPP/Metric Page 5-10 0101..39 BSPP Page 5-10 0101 Metric Page 5-11 01 BSPP Page 5-11 0109 BSPT Page 5-12 0109

More information

Compression Fittings. Brass Compression Fittings. Stainless Steel Compression Fittings. PL Nickel-Plated Brass Spigot Fittings

Compression Fittings. Brass Compression Fittings. Stainless Steel Compression Fittings. PL Nickel-Plated Brass Spigot Fittings Compression Fittings Compression Fittings Stainless Steel Compression Fittings PL Nickel-Plated Spigot Fittings Compression Fittings Compression Fittings Compression Fittings (P. 5-5) Stainless Steel Compression

More information

Brass Compression Fitting Range

Brass Compression Fitting Range Compression Fitting Range Fittings Stud Fittings 05 BSPT Page 5-9 05 NPT Page 5-9 01 BSPP/Metric Page 5-01..39 BSPP Page 5-01 Metric Page 5-11 0114 BSPP Page 5-11 09 BSPT Page 5-12 09 NPT Page 5-12 0199

More information

A Complete Range of Adaptors

A Complete Range of Adaptors A Complete Range of Adaptors Adaptors 0143 Page 9-7 0144 BSPT/ Page 9-7 0152 BSPT Page 9-7 0145 Page 9-7 0158 BSPT/ Page 9-7 0117 Page 9-8 0155 Page 9-8 0164 NPT/ Page 9-8 0167 BSPT/NPT Page 9-8 0168 Page

More information

pneumatic function fittings

pneumatic function fittings Parker Legris connectic products are available from MARYLAND METRIS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 email: sales@mdmetric.com web:

More information

Parker Legris Blowguns: A Large Selection to Suit All Applications

Parker Legris Blowguns: A Large Selection to Suit All Applications Parker egris Blowguns: A arge Selection to Suit All Applications Together, we can connect you to the best in technology. Better than ever before. In the updated edition of the Parker egris catalogue, we

More information

Cartridges and Customised Products

Cartridges and Customised Products Cartridges and Customised Products 2-2 Cartridges and Customised Products 2-3 2-4 Cartridges Polymer Cartridges Compressed Air Fluids and Gases 3100 Carstick Page 2-8 3086 Quick Fitting Page 2-8 3089 Quick

More information

connection solutions in stainless steel

connection solutions in stainless steel connection solutions in stainless steel www.legris.com egris onnectic offers many solutions in stainless steel that are designed for excellent resistance to aggressive / corrosive environments and fluids.

More information

INSTRUMENTATION - valves

INSTRUMENTATION - valves Top grade, precision valves of different types (ball, needle, check valves and many other) used in control and measuring equipment for chemical, petrochemical, pharmaceutical and power industry, nuclear

More information

TECHNICAL CATALOGUE WASHING MACHINE VALVES

TECHNICAL CATALOGUE WASHING MACHINE VALVES TECHNICAL CATALOGUE WASHING MACHINE VALVES TEC ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and distribution manifolds

More information

Rapid push-in fittings for plastic tubes Series 1000

Rapid push-in fittings for plastic tubes Series 1000 CATALOGUE > Release 8.5 > Rapid fittings Series 1000 Rapid push-in fittings for plastic tubes Series 1000 Tube external diameters: 5/3, 6/, 8/6, 10/8, 12/10, 15/12,5 mm Fittings threads: metric (M5, M6,

More information

INDUSTRIAL VALVES BRASS BALL VALVES PLUS WIDE SOLUTIONS ACCORDINGLY TO EVERY KIND OF APPLICATION OPTIMIZED DIMENSIONS & PERFORMANCES THREAD UP TO 4

INDUSTRIAL VALVES BRASS BALL VALVES PLUS WIDE SOLUTIONS ACCORDINGLY TO EVERY KIND OF APPLICATION OPTIMIZED DIMENSIONS & PERFORMANCES THREAD UP TO 4 591 INDUSTRIAL VALVES BRASS BALL VALVES PLUS WIDE SOLUTIONS ACCORDINGLY TO EVERY KIND OF APPLICATION OPTIMIZED DIMENSIONS & PERFORMANCES THREAD UP TO 4 INDUSTRIAL VALVES / BRASS BALL VALVES 592 BRASS EUROPE

More information

Configurations: s.64. s.31. s.74 3 way. Flow: Mini 2 way Direct mount. Flow: Full. Flow: Standard 3 way. ISO 5211 F03 Flange

Configurations: s.64. s.31. s.74 3 way. Flow: Mini 2 way Direct mount. Flow: Full. Flow: Standard 3 way. ISO 5211 F03 Flange RUBINETTERIE UTENSILERIE BONOMI MEETING STANDARDS IS OUR STANDARD Configurations: 1 2 3 s.31 s.64 s.74 3 way Flow: Mini 2 way Direct mount Flow: Full 2 way ISO 5211 F03 Flange Flow: Standard 3 way ISO

More information

LIQUIfit Push-In Fittings

LIQUIfit Push-In Fittings LIQUIfit Push-In Fittings This "eco-designed" range proposes an innovative alternative for water applications; no fluid contamination occurs and environmental protection is guaranteed. These fittings ensure

More information

Pneumatic: Integrated Fittings

Pneumatic: Integrated Fittings Pneumatic: Integrated Fittings Flow Controls Compact & Miniature Styles Brass & Composite Bodies Right Angle & In-line Inch & Metric Sizes Direct Mounting Check Valves Compact & light weight Inch & Metric

More information

TECHNICAL CATALOGUE AUTOMATIC AIR-VENT VALVES

TECHNICAL CATALOGUE AUTOMATIC AIR-VENT VALVES TECHNICAL CATALOGUE AIR-VENT VALVES TEC ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and distribution manifolds for

More information

BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic

BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic C D E FIGURE: PD: pneumatic actuator, double acting PE: pneumatic actuator, spring return PEO: pneumatic actuator, spring return, normally open BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic

More information

Metal LIQUID TIGHT CONDUIT FITTINGS & ACCESSORIES for Industrial Application

Metal LIQUID TIGHT CONDUIT FITTINGS & ACCESSORIES for Industrial Application Metal LIQUID TIGHT CONDUIT FITTINGS & ACCESSORIES for Straight, Male 45, Male 90, Male Straight, Female Straight, Cable Hose, Male Straight Swivel Fittings Ferrules for Fittings Further Accessories Applications

More information

Quick-release couplings Series 5000

Quick-release couplings Series 5000 CATALOGUE > Release 8. > Quick-release couplings Series 5000 Quick-release couplings Series 5000 Nominal diameter ø 5 and 7 mm - Plastic tubes 6/, 8/6, 10/8 Rubber hoses 6x1, 8x17, 10x19, 13x23 Connections

More information

ROHL Perrin & Rowe Bath U.3520L/1

ROHL Perrin & Rowe Bath U.3520L/1 EXPOSED FLOOR MOUNT TUB FILLER WITH HANDSHOWER AND LEVER HANDLES ROHL Perrin & Rowe Bath U.3520L/1 FEATURES FINISHES WARRANTY 1/2 F NPT connections Spout, valve, and handles made from solid brass 1/4 turn

More information

Mechanically actuated valves

Mechanically actuated valves Mechanically actuated valves 3/2-5/2 spool valves with 1/8-1/4" NPT threaded ports BSP version avaiable on request Installation in any position Comprehensive range of actuations, direct or servo-piloted

More information

VALFONTA PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS

VALFONTA PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS The S1 model is self-operated bellows sealed pressure excess valve. This series of

More information

Speed Controller with One-touch Fitting

Speed Controller with One-touch Fitting Speed Controller with One-touch Fitting Series Elbow Type Reduces labor time! Elbow Brass Stainless steel Electroless nickel plated Stainless steel 33 RoHS TMH y Easo t e us Push-lock type Larger handle

More information

502 brass ball valve with ADA pneumatic actuator

502 brass ball valve with ADA pneumatic actuator 502 brass ball valve with ADA pneumatic actuator MAIN CHARACTERISTICS The 502 valve is a brass ball valve dedicated to the automatic shut off of lines of standard fluids like water or air. With chromed

More information

BUTTERFLY VALVE 17 SERIES Gearbox

BUTTERFLY VALVE 17 SERIES Gearbox DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2

More information

HIGH PRESSURE SPRAYERS

HIGH PRESSURE SPRAYERS S S STRAIGHT THROUGH QDS FITTINGS AND SWIVELS NOZZLES SPRAY GUNS AND WANDS 337 NOZZLES QUICK DISCONNECT NOZZLE 0-degree red tip nozzle, 15-degree yellow tip nozzle, 25-degree green tip nozzle, 40-degree

More information

TECHNICAL CATALOGUE BALL VALVES: VIENNA

TECHNICAL CATALOGUE BALL VALVES: VIENNA TECHNICAL CATALOGUE BALL VALVES: STANDARD LOW BALL VALVES: Suitable for domestic water ServiceS, heating, airconditioning plants and compressed air SyStemS. BALL VALVES 116 BALL VALVE, STANDARD LOW size

More information

Flow Limit Safety Shutoff Valves Model 1

Flow Limit Safety Shutoff Valves Model 1 Flow Limit Safety Shutoff Valves Model 1 Model 1 Series flow limit safety shutoff valves automatically shutoff all flow from the cylinder when flow exceeds a factory preset level. The Model 1 is normally

More information

Bronze Y Type Strainers

Bronze Y Type Strainers SETION 9a Bronze Y Type Strainers Tel: + ()95 7 Fax: + ()95 72 Email: sales@hattersley.com export@hattersley.com www.hattersley.com ontents and Numerical Index Bronze Y Strainers ontents Page Figure Number

More information

Speed Controller with One-touch Fitting AS13 1F-M3 AS13 1F-M5. Specifications

Speed Controller with One-touch Fitting AS13 1F-M3 AS13 1F-M5. Specifications Speed Controller with One-touch Fitting Series Minimizes installation time and cost Reduces the mounting height and enables compact machinery design. Effective area is larger than the former model. Tube

More information

Needle Valves. Needle Valves Part Matrix. Flow Coefficient (C v ) belgas.net 1

Needle Valves. Needle Valves Part Matrix. Flow Coefficient (C v ) belgas.net 1 Needle Valves elgs Standard Needle Valves offer four choices in 316 stainless steel as well as one piece forged carbon plated steel; soft seat and hard seat, angle and globe styles. The Mini Valve offers

More information

Ball Valves with Electrical Actuator Screw-on and Flange Connection, Weld Ends

Ball Valves with Electrical Actuator Screw-on and Flange Connection, Weld Ends Ball Valves with lectrical Actuator Screw-on and Flange onnection, Weld nds measuring monitoring analysing pmax. PN 6 tmax. +60 onnections: screw thread / to / weld ends 5 to 50 flanges 5 to 50 V D, 30

More information

TECHNICAL CATALOGUE AIR VENT VALVES AND SAFETY VALVES

TECHNICAL CATALOGUE AIR VENT VALVES AND SAFETY VALVES TECHNICAL CATALOGUE AIR VENT VALVES AND SAFETY VALVES TEC ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and distribution

More information

Configurations: s.64. s.31. s.74 3 way RUBINETTERIE UTENSILERIE BONOMI. Flow: Mini 2 way Direct mount. Flow: Full 2 way

Configurations: s.64. s.31. s.74 3 way RUBINETTERIE UTENSILERIE BONOMI. Flow: Mini 2 way Direct mount. Flow: Full 2 way RUBINETTERIE UTENSILERIE BONOMI Configurations: 1 2 3 s.31 s.64 s.74 3 way Flow: Mini 2 way Direct mount Flow: Full 2 way ISO 5211 F03 Flange Flow: Standard 3 way ISO 5211 F03 Flange Mini up to 3/4 Full

More information

3/2-Way Valve DN 15 up to DN 40

3/2-Way Valve DN 15 up to DN 40 3/-Way Valve 78 DN up to DN Pneumatically operated 3/-way valve for the control of neutral and slightly aggressive media. (Stainless steel version, Data sheet Type 78) ompact design Unaffected by lightly

More information

funnels, measures, gravity cocks, jerry cans and oil suction pumps...

funnels, measures, gravity cocks, jerry cans and oil suction pumps... funnels, measures, gravity cocks, jerry cans and oil suction pumps lubrication AND ACCESSORIES grease nipples............................................................ GREASE CONNECTORS........................................................

More information

4 PUSH-IN FITTINGS / BRASS PUSH-IN FITTINGS PLUS

4 PUSH-IN FITTINGS / BRASS PUSH-IN FITTINGS PLUS PUSH-IN FITTINGS / BRASS PUSH-IN FITTINGS PLUS High performance fittings, easy to be used. Strong but also compact in order to ensure the maximum assembling flexibility. Silicon free materials. In compliance

More information

Parker Legris: Connecting You to the Best in Technology

Parker Legris: Connecting You to the Best in Technology Parker Legris: Connecting You to the Best in Technology Principle and Advantages of the Push-In Fitting The push-in fitting is the most intuitive way of connecting tubes to a fitting in order to create

More information

pvc-u section guide application guide standards and approvals

pvc-u section guide application guide standards and approvals pvc-u Unplasticised Polyvinyl Chloride (PVC-U) is the most widely used of all plastics used for pipe installations. It is rigid, versatile, and is suitable for both above or below ground installations.

More information

Keystone F89 pneumatic quarter-turn actuator General purpose / hazardous area

Keystone F89 pneumatic quarter-turn actuator General purpose / hazardous area Compact, reliable and low operation costs for all types of quarter-turn valves are the keywords of the Keystone F89 range of pneumatic actuators Features Direct mounting to all Keystone butterfly valves

More information

KEYSTONE F89 pneumatic quarter-turn actuator GENERAL PURPOSE / HAZARDOUS AREA

KEYSTONE F89 pneumatic quarter-turn actuator GENERAL PURPOSE / HAZARDOUS AREA compact, reliable and low operation costs for all types of quarter-turn valves are the keywords of the Keystone F89 range of pneumatic actuators FEATURES Direct mounting to all Keystone butterfly valves

More information

legris products are available from: Maryland Metrics

legris products are available from: Maryland Metrics legris products are available from: Maryland Metrics 2003 2005 New Products atalog web: mdmetric.com email: sales@mdmetric.com push-to-connect fittgs 9000 safety coupler mi ball valves staless steel range

More information

Ball Valves. Red Steel Long Handle. Green Steel Long Handle. Blue Steel Long Handle. Section 7 Valves. Female x Female, BSPP. Female x Female, BSPP

Ball Valves. Red Steel Long Handle. Green Steel Long Handle. Blue Steel Long Handle. Section 7 Valves. Female x Female, BSPP. Female x Female, BSPP Ball Full Bore Long Thread Flat Handle Seal Material PTFE -15 C to +120 C 25 bar Red Long Handle Blue Long Handle Green Long Handle 837 Female x Female, BSPP 0109 2023-0439 1/4 7.70 2023-0447 3/8 7.70

More information

Thermoplastic Hoses. Polyflex/Parflex. Polyflex Presto

Thermoplastic Hoses. Polyflex/Parflex. Polyflex Presto Thermoplastic Hoses Motors Valves Actuators Accumulators Filtration Polyflex/Parflex Thermoplastic Hoses for Hydraulic Applications Polyflex Presto Tubing for Pneumatics For pressures up to 700 bar. Single

More information

RUBBER SLEEVE KNIFE GATE VALVE

RUBBER SLEEVE KNIFE GATE VALVE RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve

More information

HWB Series GENERAL PUMP. Hydraulic Drive Triplex Plunger Pump INDUSTRIAL INDUSTRIAL FEATURES

HWB Series GENERAL PUMP. Hydraulic Drive Triplex Plunger Pump INDUSTRIAL INDUSTRIAL FEATURES GENERAL PUMP HWB Series Hydraulic Drive Triplex Plunger Pump FEATURES INDUSTRIAL INDUSTRIAL Innovative drive design eliminates need for auxiliary hydraulic drive Forged brass manifold Built-in Pump Thermal

More information

BUTTERFLY VALVE 1234P SERIES

BUTTERFLY VALVE 1234P SERIES FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return ASRO: Pneumatic actuator, spring return, spring to open, air to close BUTTERFLY VALVE 1234P SERIES With pneumatic actuator

More information

FIT-2. Inch. Ø Â" to Ë" O/D tube

FIT-2. Inch. Ø Â to Ë O/D tube For simple and quick assembly of pneumatic circuits. Positive tube connection. Wide range of types available. Reliable and corrosion resistant. Specifications Fluid: Compressed air, nitrogen, inert and

More information

Trunnion Ball Valve Catalogue

Trunnion Ball Valve Catalogue Trunnion Ball Valve Catalogue Introduction "Fusion" is the registered trademark of Archmetal Industries, a member of the Fortune Group. * The Fortune Group is a world class producer of a full range of

More information

for plastic tubes CONNECTION > Series 6000 super-rapid fittings GENERAL DATA Fitting with connecting tube Sprint

for plastic tubes CONNECTION > Series 6000 super-rapid fittings GENERAL DATA Fitting with connecting tube Sprint > Series 6000 super-rapid fittings CATALOGUE > Release 8.8 Series 6000 super-rapid fittings for plastic tubes Sprint Tube external diameters: 3,, 5, 6, 8, 10, 12, 1, 16 mm Fittings threads: metric (M3,

More information

Instrument Ball Valves

Instrument Ball Valves www.swagelok.com Instrument all s 40 Series On-off, switching, and crossover flow paths Working pressures up to 3000 psig (206 bar) Temperatures from 50 to 150 (10 to 65 ) Low-temperature service option

More information

Specifications. Construction. Component Parts No. 1. Description. Body. Knob. Cover Cam ring Stem Spring guide Spring Seal O-ring Valve Cassette

Specifications. Construction. Component Parts No. 1. Description. Body. Knob. Cover Cam ring Stem Spring guide Spring Seal O-ring Valve Cassette Finger Valve Series RoHS Large effective area:.0 to 7.5 mm Small knob operating force: 0.04 to 0.4 N m Poppet valve construction seldom suffers seal defection. The series begins with the min. tubing O.D.

More information

FLOW CONTROL VALVES & ACCESSORIES

FLOW CONTROL VALVES & ACCESSORIES TECHNICAL SPECIFICATIONS construction Valve group Materials Mounting Ports Position Operating temperature PNEUMATIC DATA Operating pressure Nominal pressure nominal flow needle-type Meter In, Meter Out,

More information

turia 3000 valve WATER SERIES SCOPE SERVICE CONDITIONS TECNICAL SHEET 08/2011 IP06010 PAG. 1/6

turia 3000 valve WATER SERIES SCOPE SERVICE CONDITIONS TECNICAL SHEET 08/2011 IP06010 PAG. 1/6 WTR SRIS QULITY Y TRITION turia 3000 valve TNIL SHT 08/2011 IP06010 SOP SRVI ONITIONS TURI series are manually operated metallic ball valves, by its design and raw materials are intended to be used in:

More information

NON RETURN BRASS FLANGED AGA GAS APPROVED

NON RETURN BRASS FLANGED AGA GAS APPROVED NON RETURN BRASS FLANGED AGA GAS APPROVED ACTUATED MARINE STAINLESS STEEL 34 VALVES 36... BRASS BALL VALVES 37... AGA GAS APPROVED VALVES GATE VALVES 38... BRASS VALVES 39... RUBBER BELLOW, HOSECOCKS &

More information

TECHNICAL CATALOGUE DISTRIBUTION MANIFOLDS

TECHNICAL CATALOGUE DISTRIBUTION MANIFOLDS TECHNICAL CATALOGUE DISTRIBUTION TEC ITAP SpA, founded in Lumezzane (Brescia) in 972, is currently one of the leading production companies in Italy of valves, fittings and distribution manifolds for plumbing

More information

PRODUCT CATALOG. Luneta.com

PRODUCT CATALOG. Luneta.com PRODUCT CATALOG Luneta.com 1 ABOUT US Luneta, LLC develops advanced machinery lubricant inspection technology for machine condition monitoring and reliability. Luneta s technology is designed primarily

More information

Cable Glands & Accessories

Cable Glands & Accessories Cable Glands & Accessories This catalog features ITC s extensive range of liquid-tight, strain relief cord connectors (cable glands) and accessories, including locknuts, sealing washers, plugs, etc. These

More information

PROCESS & AUTOMATED VALVES

PROCESS & AUTOMATED VALVES Process & utomated Valves HYDC s line of Process and utomated Valves complements our isolation valve knowhow and ability to supply high quality solutions to your valve requirements. 3-1 HV Series Inline

More information

HYDRAULIC MOTORS MM APPLICATION OPTIONS CONTENTS GENERAL MOTORS

HYDRAULIC MOTORS MM APPLICATION OPTIONS CONTENTS GENERAL MOTORS HYDRAULIC APPLICATION Conveyors Textile machines Mining machinery Machine tools Ventilators Construction plant equipment and access platforms etc. CONTENTS Specification data... 5 Function diagrams...

More information

37 flare couplings to ISO

37 flare couplings to ISO Applications Widely used throughout the world, 37 flare couplings are designed for most medium pressure mobile and stationary applications. These couplings are characterized by easy, compact assembly and

More information

BALL VALVE WITH ADA PNEUMATIC ACTUATOR

BALL VALVE WITH ADA PNEUMATIC ACTUATOR 702-703 BALL VALVE WITH ADA PNEUMATIC ACTUATOR DESCRIPTION The 702-703 ball valves are dedicated to the automatic shut off of industrial fluid s lines. It is a 3 pieces full valve with internal screws

More information

Odor Removal Filter. Model. Note) 1 8, , , , 3 4. Model/Free Standing Type AMF (2B)JIS 10K FF flange

Odor Removal Filter. Model. Note) 1 8, , , , 3 4. Model/Free Standing Type AMF (2B)JIS 10K FF flange fficiently can remove odor in compressed air with an activated carbon element. The unit is designed for use in the area such as a clean room where odors must be avoided. an remove odor and gas ingredients

More information

Fittings Metal Push-To- Connect Fittings. We make things MOVE

Fittings Metal Push-To- Connect Fittings. We make things MOVE Fittings Metal Push-To- Connect Fittings We make things MOVE Contents 3 Fittings 4 Product Features 4 Push-In Fittings 4 Features and Benefits 5 How it Works 5 Materials of Construction 5 Fluid 5 Operating

More information

EHV Ser ies: General Infor mation Bladder Accumulators

EHV Ser ies: General Infor mation Bladder Accumulators EHV Ser ies: General Infor mation ladder ccumulators Operation of the OLER gas loaded bladder accumulator is based on the considerable di erence in compressibility between a gas and a liquid, enabling

More information

INSTRUMENTATION ULTRA HIGH PURITY FITTINGS & VALVES

INSTRUMENTATION ULTRA HIGH PURITY FITTINGS & VALVES INSTRUMENTATION ULTRA HIGH PURITY FITTINGS & VALVES www.unilok.com Since 1984 INSTRUMENTATION Application VB1 series General Ball Valve MWP : 1000psig/69bar with PTFE seats, 2000psig/137bar with TFM seats

More information

Parker Legris: LIQUIfit Connection Solutions for Beverages & Fluids

Parker Legris: LIQUIfit Connection Solutions for Beverages & Fluids aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Parker Legris: LIQUIfit Connection Solutions for Beverages & Fluids

More information

MULTI-K TOP COAT MULTI-COUPLING MULTI COUPLING. Tailor-made according to customer s needs Compact, reliable and safe PATENT PENDING

MULTI-K TOP COAT MULTI-COUPLING MULTI COUPLING. Tailor-made according to customer s needs Compact, reliable and safe PATENT PENDING MULTI-K MULTI-COUPLING TOP COAT 107 PATENT PENDING DN 10 to 19 Tailor-made according to customer s needs Compact, reliable and safe 250 bar General features: ARGUS multi-couplings, which consist of a fixed

More information

MINIVALVES, MECHANICALLY AND HAND OPERATED SERIES VME

MINIVALVES, MECHANICALLY AND HAND OPERATED SERIES VME MINIVALVES, MECHANICALLY AND HAND OPERATED SERIES VME Minivalves with / NO NC poppet, Installation in any position Push-in fittings for pipe Ø 4 mm and on the valve body Low actuation force Rapid, accurate

More information

Modulating Water Valves and Bulb Wells

Modulating Water Valves and Bulb Wells Modulating Water Valves and ulb Wells PPLITION: These modulating valves regulate the flow of water to the heat exchanger to maintain a desired exiting oil temperature. They open automatically when temperature

More information

Needle Valves Mini, Hard Seat

Needle Valves Mini, Hard Seat Needle Valves Mini, Hard Seat 100 SERIES Compact size valve built for maximum durability and robust performance in the toughest applications 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance

More information

Keystone F89C Pneumatic Quarter-Turn Actuator Chemical Industry / Hazardous area

Keystone F89C Pneumatic Quarter-Turn Actuator Chemical Industry / Hazardous area The F89C addresses the specific requirements for automated quarter-turn valves in the chemical industry on top of the reliability and low maintenance cost offered Features Valve connection compatible with

More information

Chapter 10: Valves for Pipe Mounting

Chapter 10: Valves for Pipe Mounting Contents Chapter : Valves for Pipe Mounting Series Description Size Body Page DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 1¼ 1½ 2 L-port T-port Pressure valves, manual operation R4V R4R Pressure relief function Pressure

More information

Setting New Standards. Widest Sealing Range Maximum Strain Relief Superior Protection Rating. 94 CONTA-CLIP, Inc. (732)

Setting New Standards. Widest Sealing Range Maximum Strain Relief Superior Protection Rating. 94 CONTA-CLIP, Inc. (732) Setting New Standards Widest Sealing Range Maximum Strain Relief Superior Protection Rating 94 CONTA-CLIP, Inc. (732) 564-0705 The principle benefits gland body Materials: Nickel plated brass Stainless

More information

Fan-coil valves Series

Fan-coil valves Series Fan-coil valves Series 11-11 - 411 Main features Complete range in the following versions : -way - DN: 1/, /4, 1 -way - DN: 1/, /4, 1 -way with 4 ports - DN: 1/, /4 - The -way version and the -way versions

More information

Speed Controller with One-touch Fitting

Speed Controller with One-touch Fitting Speed Controller with One-touch Fitting S Series Push-lock Type Reduces labor time! Easy to use Easy to lock Unlock Push-lock type Lock Improved tube insertion/removal Max. Insertion force: 30% (8 N) reduction

More information

Packless Valves. Instrument / Analyzer Products. Catalog 4515/USA April 2006

Packless Valves. Instrument / Analyzer Products. Catalog 4515/USA April 2006 Packless Valves Instrument / Analyzer Products Catalog 4515/UA April 2006 NV55 eries Catalog 4515/UA NV55 eries High Flow Diaphragm Valves Parker Hannifin Corporation s presents the NV55. The NV55 is an

More information

Motorised Valve Range

Motorised Valve Range Motorised Valve Range Contents Motorised Valves... 2 Fail Safe Motorised Valves for Bio Diesel and Bio Fuels... 2 Fail Safe Motorised Valves... 3 Motor-Open Motor-Close... 6 Electro-Thermal Links... 9

More information

Colorflow and Ball Valves. Industrial Flow Control, Check, Gauge Control. Catalog HY /US

Colorflow and Ball Valves. Industrial Flow Control, Check, Gauge Control. Catalog HY /US Colorflow and Industrial Flow Control, Check, Gauge Control Catalog HY14-3300/US Colorflow and Fully guided poppets are used on Colorflow valves rather than the less durable ball-check type construction.

More information

A comprehensive range of pneumatic actuators, providing compact, reliable and economical powered operation for all types of quarter-turn valves

A comprehensive range of pneumatic actuators, providing compact, reliable and economical powered operation for all types of quarter-turn valves KEYSTONE A comprehensive range of pneumatic actuators, providing compact, reliable and economical powered operation for all types of quarter-turn valves Features Direct mounting to all Keystone butterfly

More information

MANIFOLDS VALVE. Mfg & Exp. : Valves & Fittings. A Trusted Name in Valves and Fittings ISO 9001:2008 COMPANY. Catalogue No.

MANIFOLDS VALVE. Mfg & Exp. : Valves & Fittings. A Trusted Name in Valves and Fittings ISO 9001:2008 COMPANY. Catalogue No. A Trusted Name in Valves and Fittings Mfg & Exp. : Valves & Fittings MANIFOLDS VALVE ISO 9001:2008 COMPANY Pressure Ratings: 6,000 PSI/10,000 PSI NPT, ISO/BSP, Threads 2-,3- and 5-valves Instrument manifolds

More information

HOPPER SHAPE KNIFE GATE VALVE

HOPPER SHAPE KNIFE GATE VALVE HOPPER SHAPE KNIFE GATE VALVE The C model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). makes it ideal for use

More information

SensoControl Diagnostic Equipment

SensoControl Diagnostic Equipment SensoControl Diagnostic Equipment Together, We Can Measure and Record Critical Data A Wise Investment An ounce of prevention Diagnosing a problem before it occurs should be your primary objective. Whether

More information

Function Fittings, Flow Controls, and Accessory Valves

Function Fittings, Flow Controls, and Accessory Valves Section 3 Function Fittings, Flow ontrols, and Accessory Valves 12 VA Right Angle (anjo) Flow ontrol (inch-knob adj.)..fit-3-3 12 V Right Angle (anjo) Flow ontrol (inch-slot adj.)...fit-3-3 1 TA Right

More information

RESILIENT SEATED BUTTERFLY VALVES. Howell Valve & Automation. Toll Free: Howellvalve.com

RESILIENT SEATED BUTTERFLY VALVES. Howell Valve & Automation. Toll Free: Howellvalve.com RESILIENT SEATED BUTTERFLY VALVES Howell Valve & Automation Toll Free: 1-888-469-3557 Howellvalve.com TABLE OF CONTENTS Description Page Index 2 Resilient Standard Features 3 ST Boot Series with BUNA-N

More information

» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries

» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries HYDRAULIC RW APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Grass cutting machinery etc. CONTENTS

More information

Product Catalogue November 2017

Product Catalogue November 2017 Product Catalogue November 207 Manual and Actuated Valves It s all at Albion Contents Brass 4 Ball Valves Way Valves Check Valves Gate Valves Strainers Press Valves 9 Ball Valves Check Valves Strainer

More information

Accessories. Unidirectional Flow Control DRV

Accessories. Unidirectional Flow Control DRV Unidirectional Flow Control DRV Technical data - Body: Aluminium - Seals: NBR - Springs: Stainless steel - Internal parts: Brass OT58 - Operating pressure: 2 to 10 bar (DRV75B, DRV100B: vacuum 0.2 to 10

More information

DY Series 1-Piece Ball Valves. Catalog 1001C-A. July 2012 欧陆传动

DY Series 1-Piece Ball Valves. Catalog 1001C-A. July 2012 欧陆传动 DY Series 1-Piece Ball Valves Catalog 1001C-A July 2012 欧陆传动 aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Contents

More information

ARITA. ARITA Scotch Yoke Pneumatic Rotary Actuator. Position Indicator. NAMUR Drive Shaft (Hexagon or Double flat)

ARITA. ARITA Scotch Yoke Pneumatic Rotary Actuator. Position Indicator. NAMUR Drive Shaft (Hexagon or Double flat) ARITA Position Indicator - The Top Direction - A. Position Indicator B. Limit Switch Box C. Proximity Sensor D. E/P Positioner E. Position Transmitter F. Manual Lever -Flat -Dome NAMUR Drive Shaft (Hexagon

More information

1 Pneumatics. Transmitters VR4151 VR4152 VR1210 VR1220 VR1210F VR1220F VR1211F VR VR3200 VR3201 VR3100 VR3110

1 Pneumatics. Transmitters VR4151 VR4152 VR1210 VR1220 VR1210F VR1220F VR1211F VR VR3200 VR3201 VR3100 VR3110 Best 1 Pneumatics Transmitters Relay valve P. 1900 Side piping: 30 x 53 x 91 Bottom piping: 30 x 8 x 91 VR151 VR152 Effective area (mm 2 ) Number of ports Function 7 5 Metal Spool Shuttle valve P. 1902

More information