Swing - Out Ball Valves. High Technology Valve & Fitting Series
|
|
|
- Sharleen Dawson
- 5 years ago
- Views:
Transcription
1 Swing - Out Ball Valves High Technology Valve & Fitting
2 SWB 30 SERIES SPECIFICATION Pressure Rating up to 000 psig (9 bar) at 00 (37 ) Temperature Range from -0 (- ) to 50 (3 ) TESTING Each valve is tested with nitrogen at 000 psig (9 bar) to maximum allowable leak rate of 0. SCCM. Hydrostatic shell test is performed at.5 times the working pressure. MATERIALS OF CONSTRUCTION Component Material Q TY Body End Cap Ball Ball Seal Flange Seal Stem Stem Seal Upper/Lower Packing Packing Gland Handle Nut Disc Spring Stem Nut Handle Locking Device Stem Nut Lock Flange Bolt Flange Nut ASTM A35GR/CFM ASTM A35GR/CFM SS 3 PTFE PTFE SS3 PTFE PTFE STRAIN HARDNED 3
3 TABLE OF DIMENSIONS SUPERLOK TUBE END CONNECTIONS SIZE / SUPERLOK 30 3/ SUPERLOK SWB SW / SUPERLOK 30 3/ SUPERLOK 303 SUPERLOK A S D L A B P FEMALE PIPE THREAD END CONNECTIONS 30 SWB 30 F SIZE A S D d L A B P N /.5 N 3/ 39.0 N /.5 N N N 3N 3/ -/
4 SOCKET WELD END CONNECTIONS SIZE A / 30 3/ 39.0 / SWB 30 SW 3/ / S D d L L A B P BUTT WELD END CONNECTIONS SWB BW SIZE / 3/ / 3/ / A S D d L e A B P
5 SANITARY END CONNECTIONS SWB SA SIZE / 3/ / A S 9 9 L C d D A B P OPTIONS ACTUATION We can provide pneumatic actuation package as optional item with following features - Direct mounted actuator - Reducing package devide If you require actuator as option, add A to the end of ordering number Ex)SWB305-SA-3-A BODY CAVITY FILLERS Body cavity fillers are designed to fill the cavity of the valve between the body and ball. Cavity fillers minimize problems with trapped fluid in the valve body that could contaminate the process or prevent smooth operation of the valve. If require body cavity filler as option, add BCF to the end of ordering number Ex)SWB305-SA-3-BCF 5
6 SWB 30 SERIES SPECIFICATION Pressure Rating up to 3000 psig (0 bar) at 00 (37 ) Temperature Range from -0 (- ) to 50 (3 ) TESTING Each valve is tested with nitrogen at 000 psig (9 bar) to maximum allowable leak rate of 0. SCCM. Hydrostatic shell test is performed at.5 times the working pressure. PRESSURE/TEMPERATURE RATING REINFORCED PTFE SEATS (R-PTFE) : STANDARD Pressure - Temperature Rating Temperature ( ) Working Pressure psig (bar) -0 to 00 (- to 37) 00 (5) 50 (5) 50 (7) 00 (93) 500 (03) 50 () 50 (79.) SWB () 00 (55.) 350 (7) 50 (3.5) 00 (0) 330 (.7) 50 (3) 00 (.) CARBON / GLASS PTEF SEATS : OPTION Pressure - Temperature Rating Temperature ( ) Working Pressure psig (bar) -0 to 00 (- to 37) 500 (7) 50 (5) 30 (7) 00 (93) 70 () SWB () 0 () 300 () 0 (5.) 350 (7) 0 (59.) 00 (0) 0 (33.0) 50 (3) 00 (.) To order option item, add C to the end of ordering number.
7 PRESSURE/TEMPERATURE RATING PEEK SEATS : OPTION Pressure - Temperature Rating Temperature ( ) Working Pressure psig (bar) -0 to 00 (- to37) 3000 (0) 50 (5) 0 () 00 (93) 70 () SWB () 770 () 300 () 00 (0) 350 (7) 30 (9.5) 00 (0) 0 (.) 50 (3) 00 (55.) To order option item, add P to the end of ordering number. VIRGIN PTFE SEATS : OPTION Pressure - Temperature Rating Temperature ( ) Working Pressure psig (bar) -0 to 00 (- to 37) 500 (03) 50 (5) 500 (03) 00 (93) 500 (03) SWB () 50 (79.) 300 () 00 (55.) 350 (7) 50 (3.5) 00 (0) 330 (.7) 50 (3) 00 (.) To order option item, add V to the end of ordering number. MATERIALS OF CONSTRUCTION Component Valve Body Materials Material / ASTM Specification Body Ball Support ring Seats Seat spring Flange seal Flange Stem Stem bearing CFM / A35 SS 3 / A79 SS 3 / A79 Reinforced PTFE Strain Hardned 3 SS / A0 PTFE CFM / A35 or SS 3 / A79 SS 3 / A79 Alloy X750 0 Lower packing Upper packing Reinforced PTFE Packing support Packing gland Stem spring Packing nut Stem nut lock Handle Locking device Tooth washer Flange bolt Flange nut PEEK SS 3 / A79 Strain Hardned 3 Stainless Steel Q TY 7
8 TABLE OF DIMENSIONS SUPERLOK TUBE END CONNECTION SWB30 M M 0M S SWB30 M Orifice in. (mm) 0. (.) 0. (7.) 0. (.) 0.50 (.) 0. (7.) 0. (0.) 0.5 (3.) 0. (0.) Cv End Connection / Superlok 3/ Superlok mm Superlok mm Superlok 0mm Superlok / Superlok 3/ Superlok mm Superlok A B C D E F H Superlok SWB (.) M 5mm Superlok FEMALE PIPE THREAD END CONNECTIONS SWB30 SWB30 F N N R N N R N Orifice in. (mm) 0. (7.) 0.5 (3.) Cv 3..0 End Connection / Female NPT / Female NPT / Female PT 3/ Female NPT / Female NPT / Female PT 3/ Female NPT N Female NPT SWB (.) R 3/ Female PT R Female PT A B C D E F H
9 TABLE OF DIMENSIONS SOCKET WELD END CONNECTIONS Orifice in. (mm) Cv End Connection d B A B C D E F H K T 0. (.). / Soket Weld SWB T 0. (7.) 3. 3/ Soket Weld T 0. (0.) 7.5 / Soket Weld SWB30 T 0.5 (3.) 3. 3/ Soket Weld SW P 0.5 (3.) 5.0 / Soket Weld T 0.0 Soket Weld SWB303 P 0.75 (.) 3.0 3/ Soket Weld P.0 Soket Weld BUTT WELD END CONNECTIONS SWB30 P SWB30 P SWB303 P SWB303 P SWB30 P SWB30 P BW SWB303 P SWB303 P SWB30 P SWB30 P SWB30 P SWB30 P SWB303 P Orifice in. Schedule Cv End Connection (mm) 0. (.) 0.5 (3.) (.) 0. (.) 0.5 (3.) (.) 0. (.) 0. (7.) 0 0. (0.) 0.5 (3.) 0.75 (.). / Butt Weld 5.0 / Butt Weld 3.0 3/ Butt Weld 0.0 Butt Weld. / Butt Weld 5.0 / Butt Weld 3.0 3/ Butt Weld 0.0 Butt Weld. / Butt Weld 3. 3/ Butt Weld 7.5 / Butt Weld 3. 3/ Butt Weld 0.0 Butt Weld d B A B C D E F H
10 BALL VALVE 0 SERIES SUPERLOK TUBE FITTINGS INSTRUMENTATION, HIGH PRESSURE AND TEMPERATURE, CRYOGENIC SERVICE : 9000 F(3 C) : -35 F(-9 C) TO 00 F( C) BITE TYPE TUBE FITTINGS (DIN 353) HYDRAULIC, PNEUMATIC, LUBRICATION : 00~30 F(3 C) : 00 F(7 C) MULTI-PURPOSE, PNEUMATIC SYSTEM : 000 F( C) : -5 F(-5 C) TO 50 F(3 C) BALL VALVE 30 SERIES HIGH PRESSURE INSTRUMENT LINES : 0000 F( C) : - F(-30 C) TO 5 F(30 C) PLUG VALVES INSTRUMENT THREAD FITTINGS INSTRUMENTATION, GENERAL SERVICE : 0000 F(3 C) : -35 F(-9 C) TO 00 F( C) INSTRUMENT AIR LINE, PILOT PLANT : 3000 F( C) : -0 F(-3 C) TO 00 F(0 C) MANIFOLD VALVES 0 BALL VALVE 0 SERIES INSTRUMENT AIR LINE, REFINERY PILOT PLANT : 500 F( C) : 50 F(0 C) TO 50 F(5 C) PRESSURE & DIFFERENTIAL PRESSURE INSTRUMENTATION : 000 F(3 C) : -5 F(-5 C) TO 50 F(3 C)
11 TOGGLE VALVES INTEGRAL BONNET NEEDLE VALVES GENERAL SERVICE, INSTRUMENT ISOLATION : 5000 F(3 C) : -5 F(-5 C) TO 50 F(3 C) INSTRUMENT LINE : 300 F(3 C) : -0 F(- C) TO 00 F(93 C) QUICK CONNECTS UNION BONNET NEEDLE VALVES HIGH TEMPERATURE AND PRESSURE : 000 F(3 C) : -5 F(-5 C) TO 00 F( C) INSTRUMENT LINE : 3000 F( C) : -0 F(-3 C) TO 00 F(0 C) DOUBLE BLOCK & BLEED VALVES CHECK VALVES INSTRUMENT LINES : 3000 F( C) : -0 F(-3 C) TO 375 F(9 C) PRIMARY ISOLATION, SAMPLING, CHEMICAL INJECTION : CLASS500 (000 F(3 C) : -5 F(-5 C) TO 00 F(0 C) WITH PEEK SEAT VACUUM CLAMP SWING-OUT BALL VALVES VACUUM LINES INSTRUMENT AIR LINE, OIL & GAS PRODUCTION : 3000 F(3 C) : -0 F(- C) TO 50 F(3 C)
Swing - Out Ball Valves. High Technology Valve & Fitting Series
Swing - Out Ball Valves High Technology Valve & Fitting SWB 30 SERIES SPECIFICATION Pressure Rating up to 000 psig (69 bar) at 00 (37 ) Temperature Range from -0 (-8 ) to 50 (3 ) TESTING Each valve is
SWB 310 SERIES SWING - OUT BALL VALVES
SWB 30 SERIES SPECIFICATION Pressure Rating up to 000 psig (9 bar) at 00 (37 ) Temperature Range from -0 (-8 ) to 50 (3 ) TESTING Each valve is tested with nitrogen at 000 psig (9 bar) to maximum allowable
Forged steel socket Welding fittings 6 ~ 13. Forged steel threaded fittings 14 ~ 20. Forged steel outlet fittings 21 ~ 23
Forged steel socket Welding fittings 6 ~ 13 Forged steel threaded fittings 14 ~ 20 Forged steel outlet fittings 21 ~ 23 Standard threads specifications 24 ~ 25 Comparison of astm specifications and similar
Forged Fittings. High Technology Valve & Fitting Series
Forged Fittings High Technology Valve & Fitting Series Forged steel socket Welding fittings 6 ~ 13 Forged steel threaded fittings 14 ~ 20 Forged steel outlet fittings 21 ~ 23 Standard threads specifications
120 SERIES ONE PIECE TYPE
120 SERIES ONE PIECE TYPE SBV 120H Series Features Simple design with one piece body Tight and smooth, low torque and easy operation One-piece ball stem Panel mountable Variety of End Connections Straight,
Instrument Manifolds. High Technology Valve & Fitting Series
Instrument Manifolds High Technology Valve & Fitting Series Instrument Manifolds SmallBonnet Valve (Orifice3.2) LargeBonnet Valve (Orifice6.4) Stainless steel Bar handle Packing bolt permits stem packing
Instrumentation Manifold Valves
Instrumentation Manifold Valves SM2V / SM3V / SM5V Series Ordering Information Example : SM2 V - F 8N - M40 1 2 3 4 5 1. Valve Series 2. Mounting Type 3. End Connection Type SM2 : 2-Valve Manifolds SM3
Ball Valves in investment cast stainless 2-way
Ball Valves in investment cast stainless 2-way way, 3-piece construction Can be combined with 1000 / 800 PSI WOG Thread, socket and butt weld ends Full Port to Schedule 40 pipe Semi lugged body Blow-out
The GACHOT V501 gate valve offer the most possible reliability for process and critical applications
The GACHOT V501 gate valve offer the most possible reliability for process and critical applications Features Construction complies with NF EN 1984 Straight-through flow and full port Cast body (investment
Instrumentation Manifold Valves
Instrumentation Manifold Valves SM2V / SM3V / SM5V Series Ordering Information Example : SM2 V - F 8N - M40 1 2 3 4 5 1. Valve Series 2. Mounting Type 3. End Connection Type SM2 : 2-Valve Manifolds SM3
C-INV V2. Cv Factor : 0.09 ~ 0.73 Orifice : to in. (2mm to 6.4mm) U-PRO fittings Inc.
C-INV-0911-V2 Cv Factor : 0.09 ~ : 0.079 to 0.252 (2 to.4) U-PRO fittings Inc. Materials of Construction 4 3 2 1 Stem of Tip U-PRO integral needle valves are offer ith variety of Stem tips. Starderds are
SHARPE HIGH PERFORMANCE VALVES STANDARD FEATURES ADVANTAGES
SHARPE HIGH PERFORMANCE S Sharpe 77-3 & 4 Way Ball Valves offer as standard features, advantages that other valve manufacturers offer only as costly extras. This is the Sharpe advantage. STANDARD FEATURES
Manifold & Gauge Valves I [
Instrument High Technology Valve, Flange & Fitting Series Manifold & Gauge Valves I [ Instrument Manifolds Stainless steel Bar handle Packing bolt permits stem packing adjustment. Stem thread enhance cycle
Instrument Manifolds. V, VB, and VL Series. 2-, 3-, and 5-valve instrument manifolds
www.swagelok.com Manifolds V, VB, and VL Series 2-, 3-, and 5- instrument manifolds All 316 stainless steel construction with PTFE packing Working pressures up to 6000 psig (413 bar) Temperatures up to
505F. Multi-Port Ball Valve. Full Port ISO 5211 Mounting Pad. For Automated & Manual Service. General Chemical. Industrial
505F Multi-Port Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial and Other Corrosion Resistant Applications The 505F Series 3//5-Way Ball Valve The 505F
HIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES. VB6F Series.
HIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES VB6F Series www.unilok.com Features Pressure rating up to 6000psig (413bar) @21 (70 ) with standard PCTFE seats Temperature rating from -54 (-65 ) to 177
SCREWED BONNET NEEDLE VALVES
SCREWED BONNET NEEDLE VALVES H-99 SERIES FEATURES n Blowout-Proof Stem n MAWP* up to 1, psi (69 bar) n MAWT* up to 648 C (12 F) n End connection size range: to 1" or to 25mm n Flow Coefficient (Cv) to1.5
TY-FLO 3 Piece Ball Valves
OTHER PRODUCTS Other Products TYLOK International carries a comprehensive range of high-quality fluid components to compliment the TY-FLO 3 Piece Ball Valve product line. Featured below are several popular
Item 305D-CRYOGENIC 3-PC Cryogenic Ball Valve
Item 5D-RYOGENI 3-P ryogenic Ball Valve LASS 600/ 00/ 260WOG/ PN 0 SIZE: /2"-" SPEIFIATION * MSS SP-, 2006 cryogenic standard * Suitable for -6 working condition * Body & end caps quality investment casting
TY-FLO 3 Piece Ball Valves
TY-FLO 3 Piece Ball Valves 3 PIECE BALL VALVES TY-FLO 3 Piece Ball Valves D 1 ASME B16.34 Compliant FeaTUreS 3-Piece, 8-Bolt construction provides superior high pressure performance and ASME B16.34 compliance
HIGH PRESSURE BAR STOCK BALL VALVES. VB6B Series.
HIGH PRESSURE BAR STOCK BA VAVES VB6B Series www.unilok.com s - VB6B Series Features Pressure rating up to 6000psig (413bar) @21 (70 ) with standard PTFE seats 10000psig (689bar) @21 (70 ) with optional
Triad Series. 3 Piece Ball Valves Full Port: 1 /4-4 Standard Port: 3 /4-2 1 /2. Model FP - Full Port Model SP - Standard
A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. 3 Piece Ball Valves Full Port: 1 / - Standard Port: 3 / - 1 / Triad Series Model FP - Full Port Model SP - Standard Port Flow-Tek
INSTRUMENTATION UNION BONNET VALVES. VU6 Series.
INSTRUMENTATION UNION BONNET VALVES VU6 Series www.unilok.com Features Pressure rating up to 6000psig (413bar) @38 (100 ) Temperature rating from -53 (-65 ) to 232 (450 ) with standard PTFE packing, up
Condensed Valve Guide Gate Globe Check Ball Strainer. Warren Valve - Quality Since 1963
800.231.6969 Condensed Valve Guide Gate Globe Check Ball Strainer Warren Valve - Quality Since 1963 Gate, Globe & Check Valves #1156 #2156 #3156 Gate Globe Check Pressures Class Figure 150 - #1156 300
General Specifications
General Specifications GS 22B01C52-01EN-A M-650, M-750 and M-651 3-Valve Manifolds for Differential Pressure INTRODUCTION The PGI 3-Valve manifolds are designed for mounting on differential pressure transmitters
505F Multi-Port Ball Valve
505F Multi-Port Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial Corrosion Resistant Applications The 505F Series Ball Valve The 505F is a true multi-way
Needle Valves. Catalog 1203/1205 Aug 2012
Catalog 1203/1205 Aug 2012 Visual Index Click on link for desire page. At present image not available BAX-NVFF-01 FEMALE FEMALE Page 8 BAX-NVAMF-05 MALE FEMALE (ANGLE TYPE) Page 12 BAX-NVMFD-09 MALE -
Introduction. Application & Installation. Integral Block & Bleed Valves
Integral Block & Bleed Valves Introduction SUPERLOK's response to the demand for reduction in leakage paths has been the combination of primary and secondary valves into one compact unit. The combining
TY-FLO 3 Piece Ball Valves
TY-FLO 3 Piece Ball Valves 3 PIECE BALL VALVES TY-FLO 3 Piece Ball Valves D 1 ASME B16.34 Compliant FEATURES 3-Piece, 8-Bolt construction provides superior high pressure performance and ASME B16.34 compliance
Solution Partner. Leak - Proof Flow & Control. Integral Block & Bleed Valves. W e. s u p p o r t. t h e. i n n o v a t i o n s. o f.
W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s Leak - Proof Flow & Control The Best Partner for Value Creation Solution Partner Integral Block & Bleed Valves 2 Integral Block &
PRODUCT NEWS CAT.NO.-70 KPC CORPORATION FLOW CONTROL DIVISION
PRODUCT NEWS CAT.NO.-70 CERTIFIED TO ISO 9001 KPC CORPORATION FLOW CONTROL DIVISION Internal or External Trunnion Design KPC Construction Features BODY GASKET The tongue - and - groove body gasket maximizes
Block & Bleed Valve.
Block & Bleed Valve www.nacoroke.com BLOCK & BLEED VALVES CONTENTS Introduction Application installaltions Specification Ball valve type OS&Y Needle type Glove Needle Valve type Block & Bleed valve Monoflange
INSTRUMENTATION METERING VALVES. VMT Series.
INSTRUMENTATION METERING VALVES VMT Series www.unilok.com Features Pressure rating up to VMTS series - 2000psig (137bar) VMTL & VMTM series - 1000psig (69bar) Temperature rating from -23 C(-10 F) to 204
Quarter Turn Ball Valve Systems 2 Pcs Body Design with Threaded Ends
2 Pcs Body Design with Threaded Ends Features Modular Program ball valve system igh quality investment cast stainless steel body and ends 2 pcs body full bore design, 2 way Blow out proof stem Disc spring
BLOCK & BLEED VALVE. High Technology Valve & Fitting Series.
BLOCK & BLEED VALVE High Technology Valve & Fitting Series www.tanamachine.com Brief Introduction APPLICATION & INSTALLATION SOLUTIONS TANA instrumentation products provided the ultimate suitable solutions
Locked Bonnet Needle Valves
Locked Bonnet Needle Valves Series Working Pressures up to 6000 psig (413 bar) Temperature Range from -65 to 1200 F (- 53 C to 648 C) Flow Coefficients up to 2.18 Locked bonnet eliminates accidental disassembly
Ball Valves. Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ Stainless Steel Technical Data 2160 PSI ¼
Ball Valves Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ - 4...3 316 Stainless Steel Technical Data 2160 PSI ¼ - 4...3 Style BVSC...4 Carbon Steel Technical Data 2200 PSI ¼ - 2...5
RHINO VALVES WORLDWIDE
RHINO VALVES WORLDWIDE Series 44 ISO Design of three pieces with plate disposition ISO 5211 for their automation. The drilled superior portion of the body (ISO5211) allows an easy installation of automation
Swagelok 60 SERIES BALL VALVES
Swagelok 60 SERIES BALL VALVES 2 DESIGNED FOR RELIABILITY AND LOW MAINTENANCE Swagelok combined a number of distinct features in developing the 60 series ball valve to create a very robust, reliable valve
General Specifications
General Specifications GS 22B01C53-01EN-A M-675, M-775 and M-678 5-Valve Manifolds for Natural Gas Differential Pressure INTRODUCTION The PGI 5-Valve manifolds are designed for natural gas service and
Delivering Peak Performance. High-pressure liquid and gas flow control solutions for the oil and gas industry s harshest environments
Delivering Peak Performance High-pressure liquid and gas flow control solutions for the oil and gas industry s harshest environments A leading brand of high pressure valves, tubing, fittings and accessories,
RHINO VALVES WORLDWIDE. Series 44 ISO. Design of three pieces with plate disposition ISO 5211 for their automation.
RHINO VALVES WORLDWIDE Series 44 ISO Design of three pieces with plate disposition ISO 5211 for their automation. The drilled superior portion of the body (ISO5211) allows an easy installation of automation
Special Alloy Ball Valves
www.swagelok.com Special Alloy Ball Valves 60 Series 3/8 to 1 in. sizes Alloy 625, alloy 825, alloy 2507 super duplex stainless steel, and 6-moly materials On-off (2-way) valves Compensating seat design
STC Manual & Actuated Process Valves
STC Manual & Actuated Process Valves Fine Quality Precision Engineered Excellent Prices Advanced Design connects fluid power to industrial automation Table of Contents STC Valve Numbering System.......2
Valve Products INLINE. Ball Valves. Direct Mount. Multi-port. Sanitary. Valve Automation. Motion & Flow Control Products, Inc
Valve Products Ball Valves Direct Mount Multi-port Sanitary Valve Automation INLINE BALLVALVE.COM Inline has been supplying innovative valve solutions to the process industry for nearly twenty years. Our
MCF BALL VALVES OVERVIEW
MCF BALL VALVES OVERVIEW ISSUED JULY 2014 MCF BALL VALVES OVERVIEW THE CENTER OF MCF MODULAR THREE-PIECE VALVE CONSTRUCTION, ISO 5211 TYPE BODY CONFIGURATION, ACCOMMODATES A WIDE CHOICE OF SEATS, SEALS,
DM4500 Series. Three Piece Direct Mount Ball Valves STANDARDS FEATURES & BENEFITS OPTIONS
DM4500 Series STANDARDS Valve design: ASME B16.34 Material certification: EN10204-3.1 MTR End connections: ASME B16.11, ASME B1.20.1, ASME B16.25 Steel casting: MSS SP-55 Valve marking: MSS SP-25 Valve
Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends
SPECIFICATION See our full range online at: www.vip-ltd.co.uk Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends VIP Product Codes 04/0466 (BSP)
Instrument Manifold Systems
www.swagelok.com Instrument Manifold Systems Instrument, Direct, and Remote-Mount Manifolds and Modular Systems V, VB, and VL series 2-, 3-, and 5- instrument manifolds VE series 2-, 3-, and 5- direct-mount
Baumann 24000S Stainless Steel Control Valve
24000S Valve Product Bulletin Baumann 24000S Stainless Steel Control Valve The Baumann 24000S versatile, pneumatic, control valve may be used for the control of pressure, temperature, level, and flow.
Valve Products INLINE. Ball Valves. Direct Mount. Multi-port. Sanitary. Valve Automation BALLVALVE.COM
Valve Products Ball Valves Direct Mount Multi-port Sanitary Valve Automation INLINE BALLVALVE.COM Inline has been supplying innovative valve solutions to the process industry for nearly twenty years. Our
Anderson Greenwood M24A/M24T Differential Pressure Manifolds
Lightweight and compact 5 valve manifolds designed for direct mounting to differential pressure transmitters for pressures to 6000 psig (414 barg) Features Direct mounting compact design requires minimum
Anderson Greenwood M4TL Liquid Level Manifolds
A single-flanged, two-valve manifold consisting of two block valves with no equalizer passage suitable for pressures up to 6000 psig (414 barg) Features General application The manifold is designed for
Bushing Viton O-ring (Other material available) Anti-Static Device
Triac 88 Series 3 -Piece Ball Valves feature a direct mount automation pad. The high quality investment castings feature a fully machined bore. The superior live-loaded packing system is accomplished with
DRAFT August 12, :56 PM
DRAFT August, 04 3:56 PM SERIES 7000/8000 3 PIECE FULL PORT 4-7000 - 36SS 8000 - WCB 7000/8000 SERIES BALL VALVES Flow-Tek s Series 7000 and 8000 ball valves offer the highest flexibility in selection
Recognized globally for our quality, service and the ability to deliver! ISO 9001:
Recognized globally for our quality, service and the ability to deliver! ISO 9001:2008 www.mac-weld.com MACHINING LTD. CONTENTS Introduction Page 1-2 2 Valve Manifolds Page 3-4 3 Valve Manifolds Page 5-7
Union Bonnet Needle Valves
Union Bonnet Needle Valves SUNV Series Features Panel mountable Nonrotating stem tips Variety of stem tips Variety of End Connections Straight and Angle flow patterns Each and every valve is tested at
Series 35 Direct Mount 3-Piece Full Port Ball Valves
Series 35 Direct Mount 3-Piece Full Port Ball Valves ¼ 4 (DN8 DN100) 1000 psi (PN64) 0035 20/68/EU SAFETY 2 Series 35 Ball valves feature direct mount DIE ERSTE s Series 35 ball valves feature direct mount
instrument manifolds Instrument Manifolds Index General Purpose Manifolds Overview 1 2 Valve 2 3 Valve 4 5 Valve 6 Mounting kits 8
Instrument Manifolds Index General Purpose Manifolds Overview 1 2 Valve 2 3 Valve 4 5 Valve 6 Mounting kits 8 Special Application Manifolds Trifold 3 Valve 9 Rotofold 3 Valve 12 Pentafold 5 Valve 15 Mounting
DM2500 Series. Flanged Ball Valves SPECIFICATIONS ORDERING SCHEMATIC
DM2500 Series Flanged Ball Valves SPECIFICATIONS Available in stainless steel or carbon steel Body and ends are investment cast Self-adjusting stem packing Blow-out proof stem design 100% air tested under
specification DAtA V R0 pilot operated tank blanket VAlVe, pressure regulating VAlVe SERIES V500
specification DAtA V500-2016-R0 pilot operated tank blanket VAlVe, pressure regulating VAlVe SERIES V500 Series V500 PILOT OPERATED TANK BLANKET VALVE, PRESSURE REGULATING VALVE contents Application, Features,
FIG. EA PIECE FIRESAFE BALL VALVES
FIG. EA-305 3-PIECE FIRESAFE BALL VALVES AGA-APPROVED MANUAL & AUTOMATIC FIG. EA-305 BALL VALVE FIGURE NUMBERING SYSTEM E A 305 F C X SE BS SW BW FL EMICO BRAND VALVE SYMBOL SERIES NUMBER BODY MATERIAL
Ball Valves & Accessories
Ball Valves & Accessories 2 Proven quality since 1892 Econosto, part of the ERIKS group, has been offering a wide variety of engineered products since 1892. By focusing on technical superiority along with
F-17 CATALOG. Forged Steel Valves
F-17 CATALOG Forged Steel Valves Vogt Valves A History in the Making In the late 1890s, Vogt pioneered the early development of ammonia absorption refrigeration systems that made artificial ice. This business,
Materials : Carbon steel or Stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 8 to 50 mm Threaded BSP or NPT, S.W. or B.W. -30 C in SS and -20 C in carbon steel + 220 C Max Pressure : 100 to 140 Bars Specifications : Antistatic
Condensed Valve Guide Gate Globe Check Ball Strainer. Warren Valve - Quality Since 1963
800.231.6969 Condensed Valve Guide Gate Globe Check Ball Strainer Warren Valve - Quality Since 1963 Gate, Globe & Check Valves #1156 #2156 #3156 Gate Globe Check Sizes ½"-36" Pressures Class Figure 150
CAST STEEL FLANGED GATE, GLOBE, & CHECK VALVES.
CAST STEEL FLANGED GATE, GLOBE, & CHECK VALVES www.fnw.com Index Options & Accessories... 2 Standards... 2 Figure Number Matrix... 3 Pressure/Temperature Ratings... 3 Hydrostatic Test Pressures... 3 Carbon
Masoneilan * Pressure Regulators Steam, Gas or Liquid Service Models 525 and 526
GE Oil & Gas Technical Specifications 05/2013 Masoneilan * Pressure Regulators Steam, Gas or Liquid Service Models 525 and 526 Pressure Reducing, Back Pressure and Differential Pressure Control 2 GE Oil
Ball and Stem Materials: 316 Stainless Steel Alloy 20 Monel Hastelloy C. Service Applications: Hydraulics Chemical
13560 Larwin Circle, Santa Fe Springs, CA 90670 Phone: (562) 802-2255 (800) 783-7836 Fax: (562) 802-3114 Netsite: www.svf.net E-mail: Sales@SVF.net R8 SERIES ANTI-STATIC API-607-4th EDITION 1/4 6 PROCESS
ANDERSON GREENWOOD MC/MT SERIES INTEGRAL MANIFOLDS
A range of 2, 3 and 5 valve integral manifolds to be used with Rosemount Coplanar style transmitters for static and differential pressure applications FEATURES MC2 MT2 GENERAL APPLICATION MC3 The MC/MT
Size : Ends : Min Temperature : Max Temperature : Materials : Carbon or stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 8 to 100 mm Threaded BSP or NPT, Socket or Butt Welding -20 C + 180 C Max Pressure : 63 Bars up to DN20 Specifications : Anti blow-out stem Locking
Integral-Bonnet Needle Valves
Integral-Bonnet Needle Valves 18, 20, and 26 Series Live-loaded packing system Compact design Working pressures up to 6000 psig (413 bar) Temperatures up to 600 F (315 C) Integral-Bonnet Needle Valves
Exploded view 3 piece ball valves Series R
Exploded view 3 piece ball valves Series R Ball valve of series R with reduced bore (standard version) DN10 to DN65 Example shown: Series R DN65 Please follow assembly and maintenance instructions carefully.
ANDERSON GREENWOOD M4AP/M4TP STATIC PRESSURE MANIFOLDS
ANDERSON GREENWOOD M4AP/M4TP STATIC PRESSURE MANIFOLDS Block and bleed, two valve manifolds with indirect and direct mount capabilities for static pressures to 6000 psig (414 barg) FEATURES GENERAL APPLICATION
Technology for a Better Future. VALVES International Edition.
www.genstartech.com VALVES International Edition (Needle Valve, Metering Valve, Ball Valve, Diaphragm Valve, Gauge Valve, Check Valve, Excess Flow Valve, Relief Valve, Cylinder Valve) Technology for a
3Z Rising Stem Ball Valves
3Z Rising Stem Ball Valves 1 Plant - 3Z Manufacturing & Assembly 254, Sihwa Venture-Ro, Siheung-City, Gyeonggi-Do, Korea 2 Plant - 3Z Foundry 117, Hwanggeum 2-ro, Yangchon-eup Gimpo-city in Gyeonggi-Do,
F20 Series Ball Valve Index
F0 Series Ball Valve Index Features & Benefits F0CS/F0SS Class 50/00 " - " F0CS/F0SS Class 50/00 " - " F0CS/F0SS Class 50/00 " - " State of California Prop 5 WARNING: Cancer and Reproductive Harm. For
S E LV Ball Valves VA
VALVES Ball Valves VNE 18 2 - WAY BALL VALVE SPECIFICATIONS BALL VALVES BALL VALVES... Ball Valves are used in a wide variety of high pressure applications. Two factors make them popular. First, a full
INSTRUMENTATION ULTRA HIGH PURITY FITTINGS & VALVES
INSTRUMENTATION ULTRA HIGH PURITY FITTINGS & VALVES www.unilok.com Since 1984 INSTRUMENTATION Application VB1 series General Ball Valve MWP : 1000psig/69bar with PTFE seats, 2000psig/137bar with TFM seats
THREE-PIECE BALL VALVES H-500 SERIES
THREE-PIECE BALL VALVES H-500 SERIES H-500 FEATURES 3-piece heavy-duty ball valves with: Precision Investment cast body in CF8M stainless steel Precision Investment cast end caps in CF3M stainless steel
Valves For Cryogenic Applications
Valves For Cryogenic Applications Red Dragon has been supplying specialist valve products to all industries for over 20 years and we are proud of our reputation for service, quality and speed of delivery.
Manifold and Isolation Valve Mounting System for Direct Mounting DP Transmitters
ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS for Direct Mounting DP Transmitters Introduction The Anderson Greenwood SaddleMount has been developed to overcome the problems associated with traditional transmitter/manifold
Cost Effective, Reliable Quality Tube Fittings & Valves For Instrumentation, Hydraulic & Pneumatic Applications
PRODUCT SELECTION GUIDE Cost Effective, Reliable Quality Tube Fittings & Valves For Instrumentation, Hydraulic & Pneumatic Applications...Make the leak free connections with Sealexcel products at competitive
Gauge Valves. Block and Bleed Valves Multi-Port Valves OS&Y Valves
Gauge Valves Block and Bleed Valves Multi-Port Valves OS&Y Valves Anderson Greenwood is the industry leader in instrument valve technology and the original innovator of the 3-valve manifold. Our capabilities
SERIES 17 3 & 4 WAY BALL VALVE
SERIES & WAY BALL VALVE CARBON STEEL ASTM A WCB STAINLESS STEEL ASTM A CF8M LIVE LOADED STEM PACKING BLOWOUT PROOF STEM AVAILABLE IN T, L, LL & 80 PORT CONFIGURATION LOCKABLE HANDLE ISO MOUNTING PAD SEAT
ANDERSON GREENWOOD LARGE BORE INTELLIMOUNT SYSTEM
Large bore direct mount 2, 3 or 5 valve manifold system with renewable block valve metal or soft seats and graphite or PTFE stem packings that reduces potential leakpoints FEATURES Close coupled straight
METSO NELES HIGH PERFORMANCE VALVE, METAL SEATED SERIES BW
METSO NELES HIGH PERFORMANCE VALVE, METAL SEATED SERIES BW Neles BW series metal seated high performance butterfly valve with one piece body design, for both control and tight shut-off applications. Multiple
Solution Partner. Leak - Proof Flow & Control. Manifold & Gauge & Rising Plug Valves. W e. s u p p o r t. t h e
W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s Leak - Proof Flow & Control The Best Partner for Value Creation Solution Partner Manifold & Gauge & Rising Plug Valves 2 Manifold
115 Series, Needle Valves, Single Block, Male x Male
115 Series, Needle Valves, Single Block, Male x Male Conformance Standards NACE MR0175 / ISO 15156, NACE MR0103 / ISO 17495 CRN (Canadian Registration Number) Approved/Registered ASTM B31.3 Process Piping,
The Solution For The Valve Problems Plug Valves
www.3zvalve.com The Solution For The Valve Problems Plug Valves CONTENTS The Solution For The Valve Problems Plug Valves DBB Group Double Block & Bleed Valves 5 Soft Seated Group Sleeved Valves 23 Lined
Instrumentation & Piping valves
Instrumentation & Piping valves Monoflange valves Plug valves Large bore ball valves Injection & sampling valves Double block & bleeds Various instrumentation valves DELIVERY PROGRAM www.imperialvalve.nl
Baumann 24000CVF Carbon & 24000SVF Stainless Steel Flanged Control Valves
24000CVF and 24000SVF Valves Product Bulletin Baumann 24000CVF Carbon & 24000SVF Stainless Steel Flanged Control Valves The Baumann 24000CVF and 24000SVF line of control valves can be utilized for the
Vogt Valves Catalog and Application Manual VVENCT
Vogt Valves Catalog and Application Manual VVENCT0000-06 Experience In In Motion Motion Vogt Valves, Sulphur Springs, TX Vogt Valves A History in the Making In the late 1890s, Vogt pioneered the early
SERIES 830T THREE WAY VALVE
SERIES 80T THREE WAY VALVE The series 80T three-way valve is designed for diverting service or mixing service applications. A diverting service valve takes common stream and splits it into two outlet ports.
Keystone WINN Hi-Seal High Performance Butterfly Valve
m o Keystone WINN Hi-Seal High Performance Butterfly Valve Hi-Seal, high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions Features Positive
Evans G-Series Integrated Gas Sticks
Evans G-Series Integrated Gas Sticks G-SERIES CFOS Stick Features Series CV GS 0.14 GM 1. GL 1.80 Working Pressure 0 psig (34.5 Bar) 0 psig (34.5 Bar) 0 psig (34.5 Bar) Operating Temperature - F to 1 F
Angle Seat Valve /2" up to 3"
1/ up to up to 428 F Pneumatically operated angle seat valve for the control of neutral and aggressive gases, liquids and steam. Compact design For temperatures from -22 F up to +428 F Working pressure
Forged Steel Valves Comparison Chart 1. Standard material Specification 2. Figure Number 3. Gate Valves 4-5. Globe Valves 6-7. Y-Globe Valves 8-9
INDEX Forged Steel Valves Comparison Chart 1 Standard material Specification 2 Figure Number 3 Threaded, Socket Welded & Butt Welded Ends Gate Valves 4-5 Globe Valves 6-7 Y-Globe Valves 8-9 Check Valves
Ball Valves. General Purpose and Special Application. 60 Series. 1/8 to 2 in. and 6 to 25 mm sizes
Ball s, General Purpose and Special Application60 1 www.swagelok.com Ball s General Purpose and Special Application 60 1/8 to 2 in. and 6 to 25 mm sizes Stainless steel, carbon steel, brass, and special
SERIES 86 INSTRUMENTATION 3-PIECE TUBE FULL PORT BALL VALVES
SERIES 86 INSTRUMENTATION 3PIECE TUBE FULL PORT BALL VALVES SHARPE SERIES 86 INSTRUMENTATION BALL VALVES STANDARD FEATURES Tube Full Port Design (TFP) 3Piece Design Integral ISO Mounting Pad Lockable Handle