FLANGES & GASKETS. ITEM No. QTY. DESCRIPTION SIZE MATERIAL MASS (kg) 1 1 FLANGE RFWN - DN # Sch 80 DN100mm 300# Sch 80 A
|
|
|
- Rafe Carson
- 6 years ago
- Views:
Transcription
1 FLANGES & GASKETS Most of the flanges have intelligent custom properties built into their design tables (making extensive use of the concatenate function) to populate your Bills of Materials (example below). ITEM No. QTY. DESCRIPTION SIZE MATERIAL MASS (kg) 1 1 FLANGE RFWN - DN # Sch 80 DN100mm 300# Sch 80 A This intelligent design table approach allows them to be quickly modified to suit your company s requirements or easily copied to create a flange with different material properties, etc. ANSI RF WN A105 Contains over 500 configurations with sizes ranging from DN15 to 600, ratings from 150 to 2500# and the full range of wall thicknesses. ANSI RF WN S/S 304H Contains over 500 configurations with sizes ranging from DN15 to 600, ratings from 150 to 2500# and the full range of wall thicknesses. DIN RF SOW - STEEL Configurations from DN15 to DN300, ratings from PN16 to PN40. STUB END DIN - STEEL Configurations from DN32 to DN250 FLANGE FOR STUB END DIN - GAL Configurations from DN32 to DN250 1 of 28
2 GASKET SEF DIN (for Stub End Flange) Configurations from DN32 to DN & 3mm thick. STUB END FLANGE SET DIN STEEL / GAL Configurations from DN32 to DN250 Made up of the above 2 components, plus gasket, nuts & bolts. DIN RF THREADED - GALVANISED Configurations from DN6 to DN150, ratings from PN6 to PN100 (DIN 2565 to 2568). DIN RF THREADED - STEEL Configurations from DN6 to DN150, ratings from PN6 to PN100 (DIN 2565 to 2568). ANSI RF BLIND A105 Configurations from DN15 to DN600, ratings of 150#, 300# & 600# ANSI RF BLIND 316 Configurations from DN15 to DN600, ratings of 150#, 300# & 600# ANSI RF BLIND 316L Configurations from DN15 to DN600, ratings of 150#, 300# & 600# ANSI RF SOW A105 Configurations from DN15 to DN600, ratings of 150#, 300# & 600# 2 of 28
3 ANSI RF SOW 316L Configurations from DN15 to DN600, ratings of 150#, 300# & 600# ANSI RF SOW 316 Configurations from DN15 to DN600, ratings of 150#, 300# & 600# ANSI RF SOW 304 Configurations from DN15 to DN600, ratings of 150#, 300# & 600# ANSI RF SOW 304L Configurations from DN15 to DN600, ratings of 150#, 300# & 600# GASKET, FULL FACE ANSI (RUBBER) Configurations from DN15 to DN600, ratings of 150# & 300# & 3.0mm thick (gasket shown in uncompressed state). Details per Klinger Catalogue. GASKET, FULL FACE ANSI Configurations from DN15 to DN600, ratings of 150# & 300# & 3.0mm thick (gasket shown in uncompressed state). Details per Klinger Catalogue. GASKET, RING ANSI Configurations from DN15 to DN600, & 3.0mm thick (gasket shown in uncompressed state). Details per Klinger Catalogue. GASKET, SPIRAL WOUND ANSI (S/S 304) 300+ Configurations from DN15 to DN600, ratings of 150# & 300# - 3.2, 4.4, 6.4 & 7.2mm thick (gasket shown in uncompressed state) CRIR & CR configs. Details per Klinger Catalogue. 3 of 28
4 GASKET, SPIRAL WOUND ANSI (S/S 316) 300+ Configurations from DN15 to DN600, ratings of 150# & 300# - 3.2, 4.4, 6.4 & 7.2 thick (gasket shown in uncompressed state) CRIR & CR configs. Details per Klinger Catalogue. AS2129 FF BLIND STEEL GR 250 Configurations from DN15 to DN600 in ratings of Table D, Table E, Table F & Table H. AS 2129 FF SOW STEEL GR 250 Configurations from DN15 to DN600 in ratings of Table D, Table E, Table F & Table H. GASKET, FULL FACE AS2129 Configurations from DN15 to DN600 in ratings of Table D, Table E, Table F & Table H 1.5 & 3.0mm thick. Details per Klinger Catalogue. INNER FLANGE CuNiFe DIN (CuNi10Fe1,6Mn) uses loose flange DIN Configurations from 20 OD to 914 OD. Details per Eucaro Catalogue. LOOSE FLANGE GAL DIN Use with inner flange DIN Configurations from 20 OD to 914 OD in ratings of PN16 & 10. Details per Eucaro Catalogue. INNER FLANGE CuNiFe VG (CuNi10Fe1,6Mn) uses loose flange VG Configurations from 38 OD to 133 OD. Details per Eucaro Catalogue. 4 of 28
5 LOOSE FLANGE VG (GAL & G-CuSn10) Use with inner flange VG Configurations from 38 OD to 133 OD in ratings of PN25 & 10. Details per Eucaro Catalogue. INNER FLANGE CuNiFe VG (CuNi10Fe1,6Mn) uses loose flange VG Configurations from 25 OD to 324 OD. Details per Eucaro Catalogue. LOOSE FLANGE VG (GAL & G-CuSn10) Use with inner flange VG Configurations from 25 OD to 324 OD in ratings of PN25, 16 & 10. Details per Eucaro Catalogue. DIN SOW CuNiFe (CuNi10Fe1,6Mn) Configurations from 16 OD to 108 OD in ratings of PN16/10. Details per Eucaro Catalogue. 5 of 28
6 PIPES All pipes have intelligent custom properties built into their design tables (making extensive use of the concatenate function) to populate your Bills of Materials (example below). ITEM QTY Part No. DESCRIPTION CUT LENGTH SIZE MATERIAL mm, Schedule 40 PIPE - 150NS, SCH mm ASTM A106 This intelligent design table approach allows them to be quickly modified to suit your company s requirements or easily copied to create a fitting with different material properties, etc. PIPE A106 DN 6 TO DN 900 SCH 10 to SCH 160 & STD to XXXS (WT per availability). PIPE A53 DN 6 TO DN 900 SCH 10 to SCH 160 & STD to XXXS (WT per availability). PIPE API 5L DN 6 TO DN 900 SCH 10 to SCH 160 & STD to XXXS (WT per availability). LINEPIPE DN 6 TO DN 900 SCH 10 to SCH 160 & STD to XXXS (WT per availability). PIPE 304H To DN of 28
7 PIPE DIN 2458 (ERW) DN 6 TO DN 300 PIPE CuNi10Fe1.6Mn DIN (seamless) 8 OD TO 419 OD, WT from 1.0 to 10mm. Modelled from Eucaro catalogue PIPE CuNi10Fe1.6Mn DIN (welded) 324 OD TO 1620 OD, WT from 4.0 to 10mm. Modelled from Eucaro catalogue 7 of 28
8 BUTT WELD FITTINGS All butt weld fittings have intelligent custom properties built into their design tables (making extensive use of the concatenate & VLookup functions) to populate your Bills of Materials (example below). ITEM QTY DESCRIPTION SIZE MATERIAL Kg EA 1 1 FLANGE nb RFSO ANSI 150# 100 nb-150# ASME B A CONCENTRIC REDUCER - DN100 x 80 SCH. 40 DN100x80 SCH. 40 A-234 WPB ELBOW 90 deg LRBW 100NS Sch NS Sch 40 A-234 WPB 3.8 This intelligent design table approach allows them to be quickly modified to suit your company s requirements or easily copied to create a fitting with different material properties, etc. These butt weld fittings have the CPoints offset to create a 2mm weld gap. Should your company s standard require a different gap it is a simple amendment on each of the models. ELBOW- LONG RADIUS(1.5D) - DIN STEEL (45 & 90 DEG.) Configurations DN25 to DN200 in both 45 & 90 deg. This allows SW Piping to automatically select the appropriate elbow. ELBOW SHORT RADIUS (1D) DIN STEEL (45 & 90 DEG) Configurations DN25 to DN200 in both 45 & 90 deg. This allows SW Piping to automatically select the appropriate elbow. ELBOW- LONG RADIUS(1.5D) - DIN CuNi10Fe1,6Mn (30, 45, 60 & 90 DEG.) Configurations 20 OD to 914 OD in angles of 30, 45, 60 & 90 deg. This allows SW Piping to automatically select the appropriate elbow. Per Eucaro catalogue ELBOW- SHORT RADIUS(1D) EHN 9603/600 CuNi10Fe1,6Mn (30, 45, 60 & 90 DEG.) Configurations 20 OD to 914 OD in angles of 30, 45, 60 & 90 deg. This allows SW Piping to automatically select the appropriate elbow. Per Eucaro catalogue 8 of 28
9 ELBOW LONG RADIUS (1.5D) ANSI A234 ( 45 & 90 DEG). 430 configurations DN15 TO DN900 SCH 10 to 160 & STD to XXS (WT per availability) in both 45 & 90 deg. This allows SW Piping to automatically select the appropriate elbow. ELBOW SHORT RADIUS (1D) ANSI A234 (45 & 90 DEG). 420 configurations DN20 TO DN900 SCH 10 to 160 & STD to XXS (WT per availability) in both 45 & 90 deg. This allows SW Piping to automatically select the appropriate elbow. ELBOW LRBW ANSI SS304# DN15 to DN300 SCH 5S to 80S (WT per availability). ELBOW 3D ANSI A234 (45 & 90 DEG). 430 configurations DN15 TO DN900 SCH 10 to 160 & STD to XXS (WT per availability) in both 45 & 90 deg. This allows SW Piping to automatically select the appropriate elbow. ELBOW 5D ANSI A234 (45 & 90 DEG). 430 configurations DN15 TO DN900 SCH 10 to 160 & STD to XXS (WT per availability) in both 45 & 90 deg. This allows SW Piping to automatically select the appropriate elbow.. CONCENTRIC REDUCER A234 DN20 x 15 to DN900 x 850 (950 configs) SCH 10 to 160 & STD to XXS (WT per availability). ECCENTRIC REDUCER A234 DN20 x 15 to DN900 x 850 (950 configs) SCH 10 to 160 & STD to XXS (WT per availability). 9 of 28
10 CONCENTRIC REDUCER DIN - STEEL DN20 x 16 to DN300 x 250, limited wall thicknesses. CONCENTRIC REDUCER DIN CuNi10Fe1,6Mn (SMLS) 20 x 16 OD to 368 x 324 OD, all pipe wall thicknesses (seamless only). Per Eucaro catalogue CONCENTRIC REDUCER 419 to DIN CuNi10Fe1,6Mn (WELDED) 419 x 194 OD to 914 x 813 OD, all pipe wall thicknesses (welded only). Per Eucaro catalogue ECCCENTRIC REDUCER EHN 9603/440- CuNi10Fe1,6Mn (SMLS) 20 x 16 OD to 457 x 419 OD, all pipe wall thicknesses. Per Eucaro catalogue ECCENTRIC REDUCER 508 to 914 EHN- 9603/450- CuNi10Fe1,6Mn (WELDED) 508 x 267 OD to 914 x 813 OD, all pipe wall thicknesses. Per Eucaro catalogue EQUAL TEE A234 DN20 to DN900 (except DN650, 700, 800 & 850) SCH 10 to 160 & STD to XXS (WT per availability). Per Tubemakers Techniref of 28
11 REDUCING TEE A234 (ANSI 16.9) DN20 x 15 to DN900 x 750 (except DN650, 700, 800 & 850) SCH 10 to 160 & STD to XXS (WT per availability). Per Tubemakers Techniref 1994 EQUAL TEE DIN STEEL DN20 to DN300, limited wall thicknesses. REDUCING TEE DIN STEEL DN20 x 16 to DN300 x 250, limited wall thicknesses. EQUAL TEE DIN & EHN CuNi10Fe1,6Mn 20 OD to 914 OD, all pipe wall thicknesses (seamless & welded). Per Eucaro catalogue REDUCING TEE DIN & EHN CuNi10Fe1,6Mn 25 x 20 OD to 914 x 813 OD, all pipe wall thicknesses (seamless & welded). Per Eucaro catalogue END CAP- 15 to 150NB A-234 DN15 to DN150 Sch 40, to 160 & STD, to XXS (WT per availability). END CAP SE A-234 DN200 to DN900 Sch 10 to 160 & STD TO XXS (WT per availability). 11 of 28
12 END CAP DIN CuNi10Fe1,6Mn 30 OD to 914 OD, all pipe wall thicknesses (seamless & welded). Per Eucaro catalogue BEND 180 DEG LONG RADIUS (1.5D) - A configurations DN15 TO DN900 SCH 10 to 160 & STD to XXS (WT per availability). Note that SW cannot handle elbows greater than 90 degrees; therefore these bends have to be inserted as a fitting at the end of the route, then RMB on CPoint 2 and add to route (as per an eccentric reducer in the piping help). BEND 180 DEG SHORT RADIUS (1D) - A configurations DN15 TO DN900 SCH 10 to 160 & STD to XXS (WT per availability). Note that SW cannot handle elbows greater than 90 degrees; therefore these bends have to be inserted as a fitting at the end of the route, then RMB on CPoint 2 and add to route (as per an eccentric reducer in the piping help). BEND 180 DEG LONG RADIUS (1.5D) DIN - STEEL DN25 DN200 Note that SW cannot handle elbows greater than 90 degrees; therefore these bends have to be inserted as a fitting at the end of the route, then RMB on CPoint 2 and add to route (as per an eccentric reducer in the piping help). BEND 180 DEG 3D - A configurations DN15 TO DN900 SCH 10 to 160 & STD to XXS (WT per availability). Note that SW cannot handle elbows greater than 90 degrees; therefore these bends have to be inserted as a fitting at the end of the route, then RMB on CPoint 2 and add to route (as per an eccentric reducer in the piping help). 12 of 28
13 BEND 180 DEG 5D - A configurations DN15 TO DN900 SCH 10 to 160 & STD to XXS (WT per availability). Note that SW cannot handle elbows greater than 90 degrees; therefore these bends have to be inserted as a fitting at the end of the route, then RMB on CPoint 2 and add to route (as per an eccentric reducer in the piping help). 13 of 28
14 THREADED FITTINGS All threaded fittings have intelligent custom properties built into their design tables (making extensive use of the concatenate & VLookup functions) to populate your Bills of Materials (example below). ITEM QTY DESCRIPTION CUT LENGTH SIZE MATERIAL Kg EA 1 1 HEX BUSH - 25 x 20 BSP 25x20 BSP STEEL - GALV HEX NIPPLE - 20BSP - 150lb 20BSP STEEL - GALV F/F REDUCER - 20 x 15 BSP 20 x 15 BSP STEEL - GALV 0.1 This intelligent design table approach allows them to be quickly modified to suit your company s requirements or easily copied to create a fitting with different material properties, etc. Threaded fitting make extensive use of the remove pipe function in the route sketch, this allows multiple fittings to be screwed into each other. HEXAGON BUSH GALVANISED (END) Configurations DN8x6 to DN100x80 in BSP & NPT. This part is used to start a piping HEXAGON BUSH STEEL (END) Configurations DN8x6 to DN100x80 in BSP & NPT. This part is used to start a piping HEXAGON BUSH GALVANISED (IN-LINE) Configurations DN8x6 to DN100x80 in BSP & NPT. 14 of 28
15 HEXAGON BUSH STEEL (IN-LINE) Configurations DN8x6 to DN100x80 in BSP & NPT. THREADED ELBOW F/F GALVANISED (45 & 90 DEG) Configurations DN6 to DN100 in BSP & NPT in both 45 & 90 deg. This allows SW Piping to automatically select the appropriate elbow. THREADED ELBOW F/F STEEL (45 & 90 DEG) Configurations DN6 to DN100 in BSP & NPT in both 45 & 90 deg. This allows SW Piping to automatically select the appropriate elbow. THREADED REDUCING ELBOW F/F GALV (90 DEG) Configurations DN8x6 to DN80x65 in BSP & NPT. To use this elbow you must remove the auto-radius created in your route, then insert the elbow as you would any other fitting. This allows you to toggle the elbow to achieve the correct orientation. THREADED REDUCING ELBOW F/F STEEL (90 DEG) Configurations DN8x6 to DN80x65 in BSP & NPT. To use this elbow you must remove the auto-radius created in your route, then insert the elbow as you would any other fitting. This allows you to toggle the elbow to achieve the correct orientation. THREADED ELBOW M/F GALVANISED (90 DEG) Configurations DN8 to DN80 in BSP. To use this elbow you must remove the auto-radius created in your route, then insert the elbow as you would any other fitting. This allows you to toggle the elbow to achieve the correct orientation. THREADED ELBOW M/F STEEL (90 DEG) Configurations DN8 to DN80 in BSP. To use this elbow you must remove the auto-radius created in your route, then insert the elbow as you would any other fitting. This allows you to toggle the elbow to achieve the correct orientation. 15 of 28
16 90 DEG THREADED ELBOW ANSI B16.11 A105 Modified SW library part to metric DN6 to DN #, 3000# & 6000# 90 DEG THREADED ELBOW- ANSI B16.11 GALVANISED Modified SW library part to metric DN6 to DN #, 3000# & 6000# 45 DEG THREADED ELBOW ANSI B A105 Modified SW library part to metric DN6 to DN #, 3000# & 6000# 45 DEG THREADED ELBOW ANSI B GALVANISED Modified SW library part to metric DN6 to DN #, 3000# & 6000# THREADED CROSS A105 Modified SW library part to metric DN6 to DN #, 3000# & 6000# THREADED CROSS- GALVANISED Modified SW library part to metric DN6 to DN #, 3000# & 6000# 16 of 28
17 HEX NIPPLE (150#) - GALVANISED (BOTH IN-LINE & END VERSIONS) DN6 to DN100 in BSP & NPT HEX NIPPLE (150#) STEEL (BOTH IN-LINE & END VERSIONS) DN6 to DN100 in BSP & NPT HEX REDUCING NIPPLE (150#)- GALVANISED DN 8 X 6 TO DN 100 X 80 IN BSP & NPT HEX REDUCING NIPPLE (150#) - STEEL DN 8 X 6 TO DN 100 X 80 IN BSP & NPT HEX HEAD PLUG GALVANISED DN6 TO DN100 IN BSP & NPT HEX HEAD PLUG STEEL DN6 TO DN100 IN BSP & NPT THREADED REDUCER F-F-150# - GALVANISED(IN-LINE) DN 8 X 6 TO DN 80 X 70 BSP & NPT 17 of 28
18 THREADED REDUCER F-F-150# - STEEL (IN-LINE) DN 8 X 6 TO DN 80 X 70 BSP & NPT SOCKET 150# - GALVANISED (IN-LINE) DN6 to DN 100 in BSP SOCKET 150# - STEEL (IN-LINE) DN6 to DN 100 in BSP TANK (HALF) SOCKET- 150# - GALVANISED (END) DN6 TO DN100 in BSP This part is used to start a piping TANK (HALF) SOCKET- 150# - STEEL (END) DN6 TO DN100 in BSP This part is used to start a piping THREADED EQUAL TEE 150# - GALVANISED DN6 to DN100 BSP & NPT 18 of 28
19 THREADED EQUAL TEE 150# - STEEL DN6 to DN100 BSP & NPT THREADED EQUAL TEE ANSI B16.11 A105 DN8 to DN , 3000 & 6000# Modified SW library part to metric per others THREADED EQUAL TEE ANSI B16.11 GALVANISED DN8 to DN , 3000 & 6000# Modified SW library part to metric per others THREADED UNION ANSI B16.11 A105 (IN- LINE) DN6 to DN & 6000# THREADED UNION ANSI B16.11 GALVANISED (IN- LINE) DN6 to DN & 6000# THREADED UNION ANSI B16.11 A105 (END) DN6 to DN & 6000# This part is used to start a piping 19 of 28
20 THREADED UNION ANSI B16.11 GALVANISED (END) DN6 to DN & 6000# This part is used to start a piping THREADED UNION F/F 150# - GALVANISED (END) DN6 to DN80 BSP & NPT This part is used to start a piping THREADED UNION F/F 150# - STEEL (END) DN6 to DN80 BSP & NPT This part is used to start a piping THREADED UNION F/F 150# - GALVANISED (IN-LINE) DN6 to DN80 BSP & NPT THREADED UNION F/F 150# - STEEL (IN-LINE) DN6 to DN80 BSP & NPT 20 of 28
21 SOCKET WELD FITTINGS All socket weld fittings have intelligent custom properties built into their design tables (making extensive use of the concatenate function) to populate your Bills of Materials (example below). ITEM QTY DESCRIPTION CUT LENGTH SIZE MATERIAL Kg EA 1 1 SOCKET WELD UNION - DN # DN # ASTM A SOCKET WELD UNION - DN # DN # ASTM A PIPE - 40NS, SCH mm ASTM A This intelligent design table approach allows them to be quickly modified to suit your company s requirements or easily copied to create a fitting with different material properties, etc. SOCKET WELD UNION ANSI B16.11 A105 (END) DN6 to DN & 6000# This part is used to start a piping SOCKET WELD UNION ANSI B16.11 A105 (IN-LINE) DN6 to DN & 6000# xxx xxx xxx XXX XXX 21 of 28
22 VALVES All valves have intelligent custom properties built into their design tables (making extensive use of the concatenate function) to populate your Bills of Materials (example below). ITEM QTY. DESCRIPTION SIZE kg 1 1 KNIFE GATE VALVE - 250NB TABLE D DN250 TABLE D BALL VALVE - DN65 BSPT DN65 BSPT BALL VALVE - 3 PIECE - DN40-NPT DN40 NPT 2.9 This intelligent design table approach allows them to be quickly modified to suit your companies requirements or easily copied to create a valve with different material properties, etc. 3 Piece Ball Valve. Configurations DN8 to 50 in BSP, NPT & SW INSTRUMENT NEEDLE VALVE Configurations 6 to 25 NPT S/S 316 With both a round and Tee handle. BUTTERFLY VALVE, LUGGED Configurations DN50 to DN300 in ANSI 150#, BST E & BST D. Modelled from Keystone AR2 catalogue. BUTTERFLY VALVE, LUGGED NO HANDLE Configurations DN50 to DN900 in ANSI 150# and DN50 to DN300 in BST E & BST D. Modelled from Keystone AR2 catalogue. No handle to allow use with various actuators. 22 of 28
23 BUTTERFLY VALVE 50 TO 300 PNEUMATIC (THIS IS AN ASSEMBLY) Configurations DN50 to DN300 in ANSI 150#, BST E & BST D with both the single & double acting F79U/E actuators. Modelled from Keystone AR2 & 79U/E catalogues. BUTTERFLY VALVE 50 TO 900 GEARED HANDWHEEL (THIS IS AN ASSEMBLY) Configurations DN50 to DN900 in ANSI 150#, BST E & BST D with geared handwheel F427. Modelled from Keystone AR2 & F427 catalogues. FLANGE BALL VALVE PNEUMATIC (THIS IS AN ASSEMBLY) DN15 to 50, Full & Reduced Bore 150# & 300# with F79U/E actuator. Modelled from Keystone F344 & 79U/E catalogues. F79U/E PNEUMATIC ACTUATOR Sizes 003 to 036, Spring Return & Double Acting fitted with positioner.. Modelled from Keystone 79U/E catalogue. BALL VALVE DN FLANGED DN80 to 200, 150# & 300# Modelled from Keystone F344 & F345 catalogues. 23 of 28
24 BALL VALVE DN REDUCED BORE DN65 to 100, BSPT, NPT, SW & Sch 40 BW - With either handle or pneumatic actuator. Modelled from Keystone F382 & 79U/E catalogues. BALL VALVE DN FLANGED DN15 to 50, 150# & 300# Modelled from Keystone F344 & F345 catalogues. BALL VALVE DN15-50-FLANGED FOR ACTUATOR DN15 to DN50, 150# & 300# to accept F79U/E. Modelled from Keystone F344 & F345 catalogues. GATE VALVE CAST STEEL DN50 to DN300, 150# & 300# KNIFE GATE VALVE DN DN250 to 600, Table D. Modelled from the Keystone F952 catalogue. 24 of 28
25 JORDAN MK 50 BACK PRESSURE VALVE DN15 to DN50, NPT & BSP Modelled from the Jordan Treloar MK 50 catalogue. SPIRAX SARCO DCV 2 WAFER CHECK VALVE DN15 to DN100. Can be fitted between the following flanges: BS10 table E (except DN65 & 80) Table H and BS4504/DIN PN6 to 40. Modelled from the Spirax Sarco product handbook ( ) 25 of 28
26 MISCELLANEOUS PIPING ITEMS All parts have intelligent custom properties built into their design tables (making extensive use of the concatenate function) to populate your Bills of Materials (example below). ITEM QTY DESCRIPTION SIZE MATERIAL Kg EA 1 1 STRAUB COUPLING (W2 - EPDM) - DN80 (OD 88.9) PIPE OD 88.9 STRAUB METAL GRIP (W2 - EPDM) 2 This intelligent design table approach allows them to be quickly modified to suit your company s requirements or easily copied to create a similar part with different material properties, etc. STRAUB COUPLING METAL GRIP (END) PIPE OD 30mm to Material grades W1, W2 & W4 with both NBR & EPDM seals. This part is used to start a piping STRAUB COUPLING METAL GRIP (IN-LINE) PIPE OD 30mm to Material grades W1, W2 & W4 with both NBR & EPDM seals. route 26 of 28
27 MISCELLANEOUS ASSEMBLIES Below are a collection of assemblies that you may find useful for use in a piping / plant installation project. DISCLAIMER: Please note that any pressure containing parts/vessels MUST have the appropriate design calculations & design verification conducted by an accredited company/person to ensure that they comply with your country s design codes and are deemed suitable for use in your piping/ pressure vessel design. Steam header assembly. Modelled using SW Piping plus a number of my library parts & assemblies and controlled by a driving part (containing the driving sketch & associated planes). Shown here with a 400nb body and nozzles ranging from 300nb to 80nb. However, this header can be copied, re-named and re-sized to suit your requirements. Steam Trap (Thermodynamic) Set. Based on Spirax Sarco thermodynamic steam trap set inlet isolating valve, strainer, steam trap, sight/check & discharge isolating valve. Has 2 configurations: 15 & 20 BSP Steam Trap (Float) Set. Based on Spirax Sarco float type steam trap set inlet isolating valve, strainer, steam trap, sight/check & discharge isolating valve. Has 2 configurations: 15 & 20 BSP 27 of 28
28 ELLIPTICAL INSPECTION OPENING AS 1210 (material AS R) Configurations: 400x300, 225x180, 180x125 & 115x90. Based on the now defunct Rheem Tank Products inspection openings.. 28 of 28
LATEST ARRIVALS CATALOGUE STOCK
LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL
Piping Material Specification - Piping class : CS101
Piping Material Specification - Piping class : CS101 SERVICE PROCESS (NG) BASIC MATERIAL CARBON STEEL RATING CLASS 150#, ASME B 16.5 DESIGN CODE ASME B 31.3 DESIGN TEMPERATURE NOMINAL CORROSION ALLOWANCE
flowconme Types of Fittings Available Wall Thickness Sch 5 - Sch 160 (Sch 5s - Sch 160s) Others available upon special request
FITTINGS Overview Types of Fittings Available 45, 9 Elbows, 18 Returns (Short & Long Radius) Tees & Crosses (equal & reducing), Reducers (concentric & eccentric), Caps, Stud Ends, Weldolets, Outlets, Laterals
LATEST PRICE LISTS PIPES & TUBES FITTINGS VALVES CONTACT DETAILS: AUTHORISED DISTRIBUTORS of: JINDAL PIPES LTD. MAHARASHTRA SEAMLESS LTD.
LATEST PRICE LISTS 2017 PIPES & TUBES AUTHORISED DISTRIBUTORS of: JINDAL PIPES LTD. MAHARASHTRA SEAMLESS LTD. SANT INDUSTRIAL VALVES FITTINGS VS FORGED FITTINGS C BRAND ISI APPROVED G.I. FITTINGS VALVES
SEAMLESS & WELDED PIPE
SEAMLESS & WELDED PIPE SPECIFICATIONS: LENGTHS: ASTM A312M-08 6.1 METRE/RANDOMS FINISH: WELDED ANNEALED & PICKLED SEAMLESS COLD FINISH/HOT FINISH NB PIPE SIZE SIZE WELDED SEAMLESS APPROX. WGT Inch mm O.D.
Valves for general purpose & industry
Valves for general purpose & industry Carbon steel & stainless steel ball valves 1 piece body... page 14 2 piece body... page 14 2 piece body - High temperature... page 14 2 piece construction - 3 way...
STAINLESS STEEL FITTINGS AND VALVES
STAINLESS STEEL FITTINGS AND VALVES RHEINMAIN FITTINGS STAINLESS STEEL SCREWED FITTINGS EG 23 A / G-33 Weld nipple /8" 6", thread EN 0226, ISO 7- Standard and special length Material 36/304 36Ti/32 EG
PRESSURE GAUGES DIAL THERMOMETERS PRESSURE & TEMP. SWITCHES PRESSURE & TEMP. TRANSMITTERS PIPES, PIPE FITTINGS & FLANGES
WATER METERS VALVES & COCKS PRESSURE GAUGES DIAL THERMOMETERS PRESSURE & TEMP. SWITCHES PRESSURE & TEMP. TRANSMITTERS PIPES, PIPE FITTINGS & FLANGES FILTER, REGULATOR & LUBRICATORS W IKA V I INSTRUMENTS
DRAWING INDEX 1 07/01/2013. Company Project Project Number Location Revision Date
DRAWING INDEX Company Project Project Number Location Revision Date LEGACY OIL & GAS INC. PIERSON PILINE TO EOG 12069 VARIOUS LSD ISSUED FOR APPROVAL January 4, 2013 Drawing No. Client No. Description
PIP PN01CS2S01 Piping Material Specification 1CS2S01 Class 150, Carbon Steel, Socket Weld, 0.125" C.A., Process
May 2016 Piping PIP PN01CS2S01 Piping Material Specification 1CS2S01 Class 150, Carbon Steel, Socket Weld, 0.125" C.A., Process PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the
E STORE PRICELIST E Store Pricelist Page No 1
E STORE PRICELIST 10-01-18 Page No 1 Index Page No Description Make Size range 4 Pricelist of M.S & G.I Pipes as per IS -1239 part I / IS 3589 JINDAL/TATA ½ to 6 Pricelist of C.S seamless Non IBR & IBR
PV4 and PV6 Piston Valves
Description The and are piston isolation valves that have been designed for use on steam, condensate and other liquid sytems. Available types: and Piston ¾" shown Screwed, butt weld and socket weld connections
E STORE PRICELIST 10/11/2017. E Store Pricelist Page No 1
E STORE PRICELIST 10/11/2017 Page No 1 Index Page No Description Make Size range 4 Pricelist of M.S & G.I Pipes as per IS -1239 part I / IS 3589 JINDAL/TATA ½ to 6 Pricelist of C.S seamless Non IBR & IBR
PIP PN01CS1B02 Piping Material Specification 1CS1B02 Class 150, Carbon Steel, Butt Weld, C.A. Process
March 2016 Piping PIP PN01CS1B02 Piping Material Specification 1CS1B02 Class 150, Carbon Steel, Butt Weld, 0.063 C.A. Process PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the
Direct Mount Packages
800.783.7836 Direct Mount Packages BEV9 Actuated package Size range: 1/ - Pressure rated for 1000 WOG 316 Stainless steel construction Live loaded stem seal design Full Port Threaded Ends (F) EZ99 Actuated
6. Butterfly Valves & Accessories
1. Plastic Pipes 2. Steel Pipes 3. Penetration Tubes 4. Piping Accessories 5. Needle Valves 6. Butterfly Valves & Accessories 7. Miscellaneous Valves 7 1. PLASTIC PIPES TYPES OF PLASTIC PIPES ADAPTATOR
M10F Ball Valve DN¼" to DN2½"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
CAST IRON FITTINGS STANDARD
060-1 CAST IRON FITTINGS STANDARD ITEM 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 90 ELL 11.03 15.95 6.99 7.29 8.62 12.24 16.93 26.45 90 REDUCING ELL * 22.20 14.69 12.27 15.44 31.19 41.74 45 ELL 13.59 14.60
Copper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10)
Offshore OSNA -10 Copper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10) KME Germany GmbH & Co. KG Offshore OSNA -10 [GB] Content KME - The Company 1 The Material 2 Offshore Product Range 3 Pipes
A GUIDE TO PIPE SIZES
A GUIDE TO PIPE SIZES Pipe Strengths To identify the dimensions and strengths of different pipe, it is common to use schedule terminology taken from the ANSI pipe schedule chart. The pipe schedule chart
IMPACT IMPEX PTFE, PFA, PVDF, PP LINED PIPE & FITTINGS. ANSI # 150.
IMPACT IMPEX PTFE, PFA, PVDF, PP LINED PIPE & FITTINGS.. The information contained in this publication is intended as a guide to customers, and is freely given in good faith. Whilst every care has been
NON RETURN BRASS FLANGED AGA GAS APPROVED
NON RETURN BRASS FLANGED AGA GAS APPROVED ACTUATED MARINE STAINLESS STEEL 34 VALVES 36... BRASS BALL VALVES 37... AGA GAS APPROVED VALVES GATE VALVES 38... BRASS VALVES 39... RUBBER BELLOW, HOSECOCKS &
CARBON STEEL PIPE - BUTTWELD
010-1 CARBON STEEL PIPE - BUTTWELD WEIGHT BLACK GALVANIZED FUSION BOND SIZE LBS/FT T & C P.E. T & C P.E. 1/8" 0.24 8.00 6.09 16.40 14.28 1/4" 0.42 9.61 8.25 15.27 12.91 3/8" 0.57 10.98 9.52 16.91 14.39
- Seamless pipe, Welded steel pipe - Standard: ASME/JIS/DIN.
CARBON STEEL PIPES STAINLESS STEEL PIPES - Seamless pipe, Welded pipe (ERW), Spiral welded pipe. - Seamless pipe, Welded steel pipe - Standard: ASME/JIS/DIN. - Standard: ASME/JIS - Material: ASTM A53/A106
505F. Multi-Port Ball Valve. Full Port ISO 5211 Mounting Pad. For Automated & Manual Service. General Chemical. Industrial
505F Multi-Port Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial and Other Corrosion Resistant Applications The 505F Series 3//5-Way Ball Valve The 505F
Forged steel socket Welding fittings 6 ~ 13. Forged steel threaded fittings 14 ~ 20. Forged steel outlet fittings 21 ~ 23
Forged steel socket Welding fittings 6 ~ 13 Forged steel threaded fittings 14 ~ 20 Forged steel outlet fittings 21 ~ 23 Standard threads specifications 24 ~ 25 Comparison of astm specifications and similar
Section 7. Socket Weld and Threaded Fittings. Socket Weld and Threaded Fittings 7-1
Section 7 Socket Weld and Threaded Fittings This Section contains dimension and tolerance information extracted from American and British specifications applicable to socket weld and threaded fittings.
BALL VALVE DATA SHEET NO. 01 (150#)
BALL VALVE DATA SHEET NO. 01 (150#) VALVE CODE BF101 VALVE TYPE Double Flanged Full Port BODY MATERIAL CARBON STEEL TO ASTM A 216 Gr. WCB CLASS 150# DESIGN STANDARD ISO 17292 SIZE 1/2" TO 1 1/2" 2" TO
Xiamen Landee Industries Co., Ltd was founded on 14th May 2001;
ABOUT US Xiamen Landee Industries Co., Ltd was founded on 14th May 2001; Our main products are OCTG, Heat Exchanger Tube, Plate, Pressure Vessel, Line Pipe, Valve, Flange, Fitting, Gasket, Fastener, etc;
SCA Series Steel Inverted Bucket Steam Traps
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
What's in a ball valve?
Ball valves What's in a ball valve? An efficient and reliable process demands quality products. This includes the important function of flow isolation. If inferior products are used, breakdowns and expensive
L&T VALVES BUSINESS GROUP A
Larsen & Toubro Limited (L&T) is a US $ 5 billion engineering and construction company, with a strong presence in manufacturing, services and Information Technology. L&T was founded in 1938 by two Danish
We Are the Worldwide Provider for All Your Valve and Fitting Needs
Product Catalog We Are the Worldwide Provider for All Your Valve and Fitting Needs C&C strives to earn your business by offering an extensive line of high quality products with a proven track record for
PIP PN01CA1S01 Piping Material Specification 1CA1S01 Class 150, Impact Tested Carbon Steel, Socket Weld, 0.063" C.A., Process
December 2017 Piping Piping Material Specification 1CA1S01 Class 150, Impact Tested Carbon Steel, Socket Weld, 0.063" C.A., Process PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize
Control Components Pty Ltd. Drawing Number. Indicator Model Overview A 66.01A Side flanged connection
ABN 24 8 175 293 PO Box 212 Caringbah NSW 1495 Sydney Australia ph: +61 ()2 9542 8977 fx: +61 ()2 9542 7978 www.controlcomponents.com.au HELP@controlcomponents.com.au Magnetic Visual Level Indicators made
M10Si ISO Ball Valve DN¼" to DN2½"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Established in 1982, Modentic Industrial Corporation is involved in the world of stainless steel valves & fittings selling.
Modentic Industrial Corp. ISO 9001 Certified. Established in 1982, Modentic Industrial Corporation is involved in the world of stainless steel valves & fittings selling. Contents A view of valve process
We Are the Worldwide Provider for All Your Valve and Fitting Needs
Product Catalog We Are the Worldwide Provider for All Your Valve and Fitting Needs C&C Industries strives to earn your business by offering an extensive line of high quality products with a proven track
BALL VALVES BUTTERFLY VALVES GLOBE VALVES GATE VALVES CHECK VALVES KNIFE VALVES Y STRAINERS ACTUATION BALL VALVES SS2020N-300 2 PIECE FLANGED ANSI 300 BALL VALVE Firesafe Certified Full Bore TMF1600 seats
BUTTERFLY VALVE WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) and 41001
Operation WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) 41101 and 41001 C ont R o L Description Edition Wafer type butterfly valve 411 (410) series are used in industrial
KP-28 & KT-28 Two Way Control Valve
CRN-CANADA PASCO KP-28 & KT-28 Two Way Control Valve Fluid Control For Sustainable Future Features 1. Modulating and open/close functions with electric or pneumatic actuators and others for selection.
PIP PN01SD0B03 Piping Material Specification 1SD0B03 Class 150, 316/316L Stainless Steel, Butt Weld, C.A., Process
May 2016 Piping Piping Material Specification 1SD0B03 Class 150, 316/316L Stainless Steel, Butt Weld, 0.000 C.A., Process PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost
3 PC FULL BORE BALL VALVE
Pressure (Bar) 3 PC FULL BORE BALL VALVE 3 PC FULL BORE 1000PSI STAINLESS STEEL THREADED/SOCKET WELD END BALL VALVE Feature: 3 PC Body Design Full Bore, Quarter turn operation Size: 1/4 4 (DN8-100) Working
Praher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation.
Praher S4 Ball Valve Lockable Handle Tagging Point Valve Bracket Actuation Materials Body - PVDF Ball Seat - PTFE Seals - FPM Sizes 3/8-4 /16mm - 110mm Features Lockable Handle (Lock not supplied) True
Praher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation.
Praher S4 Ball Valve Lockable Handle Tagging Point Valve Bracket Actuation Materials Body - PVDF Ball Seat - PTFE Seals - FPM Sizes 3/8" - 4"/16mm - 110mm Features Lockable Handle (Lock not supplied) True
Forged Fittings. High Technology Valve & Fitting Series
Forged Fittings High Technology Valve & Fitting Series Forged steel socket Welding fittings 6 ~ 13 Forged steel threaded fittings 14 ~ 20 Forged steel outlet fittings 21 ~ 23 Standard threads specifications
FT47 SG Iron Ball Float Steam Traps (DN15 to DN50)
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Manufacturer of Industrial Valves a n d R e l e v a n t E q u i p m e n t. Tilting Disk Check Valves with Counter Weight.
Manufacturer of Industrial Valves a n d R e l e v a n t E q u i p m e n t Tilting Disk Check Valves www.mirabvalves.com TiltingDisc Check Valves Size: DN 100 1 mm Pressure: PN 10 40 bar Face to face:
DK-LOK Hydraulic Pipe Fittings
Class 2000, 3000, 6000, 9000 fittings Catalog No. C-2 June 2012 DK-LOK Hydraulic Pipe Fittings are designed and manufactured to the following standards. ASME B 16.11-2005: Forged fittings, Socket-welding
PIPES, PIPE FITTINGS VALVES & FLANGES
PIPES, PIPE FITTINGS VALVES & FLANGES 2 About the Company Atlas Commercial Company (Kwt.) W.L.L was established in 1962, and is part of the Boodai group of companies. Atlas is one of the oldest companies
(ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST IRON INVERTED BUCKET STEAM TRAP
(ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST INVERTED BUCKET STEAM TRAP ST-B1B2 ST-B3 ST-B4 (ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST INVERTED BUCKET STEAM TRAP MATERIAL PARTS Cap and Body Valve Seat Valve Gasket Material
Certifications & Approvals
Industrial Certifications & Approvals Matco-Norca is committed to maintaining a high standard of quality for all the products we offer. Most products in this catalog are labeled with a designated approval
ORIFICE PLATE flow meters
ORIFICE PLATE flow meters 1 Differential pressure and pressure loss When a throttle element is interposed in a closed passage of fluid in piping, a difference is produced between the pressure upstream
CLASS 400 FORGED BRASS BALL VALVE
CLASS 400 FORGED BRASS BALL VALVE FIG. 214 Screwed body cap, PTFE seats, Blowout-proof stem. Screwed ends to BS 21. Nickel plated body. Chrome plated ball. UNI-FLO NYLON BALL VALVES FIG. 214NS/NB Features:
M21Fi ISO Reduced Bore Firesafe API607 Ball Valve DN15 to DN150 Flanged PN40
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Valves dimension of pressure (lbs) ANSI2500 ANSI1500 ANSI900 ANSI600 ANSI300 ANSI150. Inch. from 1/2 up to 6
+ CARBON STEEL Type: ball valve ANSI B16.5 Body: round Material: A105/F316 Ball seats: from DN13 up to DN150 O-Rings: NBR, FKM, EPDM, MVQ Operating pressure: 20 Bar - 50 Bar - 100 Bar 150 Bar - 250 Bar
ALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN
BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric
R o L. BUTTERFLY VALVE of carbon steel with welded ends 313 -series BLUE LINE. Description
of carbon steel 313 -series C ont R o L Description Edition 23-07-2015 The welded butterfly valve 313 is specially designed for district heating and district cooling. It can be used as an on-off or control
Datasheet Rev.3 Feb 2015 Venturi tube
Datasheet Rev.3 Feb 2015 Venturi tube Venturi tube design based on IS5167, ASME.MFC.3M and IS TR15377 :2007 industry standards No need for calibration standardised principle Accuracy, repeatability and
PRODUCT CATALOGUE. Kerr Valves & Industrial Supplies (Pty) Ltd.
PRODUCT CATALOGUE Kerr Valves & Industrial Supplies (Pty) Ltd 2018 www.kerrvalves.co.za About Kerr Valves & Industrial Supplies (Pty) Ltd Since its establishment in 1982, Kerr Valves and Industrial Supplies
Mercy Hospital of Buffalo Catholic Health System 2 nd Floor Patient Holding Center 3 rd Floor Locker Rooms Shaflucas Architects, PC Project No.
SECTION 23 22 13 STEAM AND CONDENSATE PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division 1 Specification
COMPLETE REVISION December Piping
December 2015 Piping Piping Material Specification 3SA0J01 Class 300, 304/304L Stainless Steel, Jacketed Construction, 0.000 C.A. Core: Process Jacket: Steam PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES
Forged Steel Fittings CLASS 3000 THREADED
Forged Steel Fittings CLASS 3000 THREADED NPS 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4 DN 6 8 10 15 20 25 32 40 50 65 80 100 90 0 ELBOWS A in 0.97* 0.97 1.12 1.31 1.50 1.75 2.00 2.38 2.50 3.25 3.75
COMPLETE REVISION December Piping
December 2015 Piping PIP PN01SA0J01 Piping Material Specification 1SA0J01 Class 150, 304/304L Stainless Steel, Jacketed Construction, 0.000 C.A. Core: Process Jacket: Steam PURPOSE AND USE OF PROCESS INDUSTRY
Copper & Copper Nickel. Pipes Fittings Flanges.
Copper & Copper Nickel Pipes Fittings Flanges BOMYUNG METAL.Co.,Ltd CONTENTS 01 COPPER PIPES COPPER PIPES CHEMICAL COMPOSITION / MECHANICAL PROPERTIES / WELDING INSTRUCTION / PIPE / COIL COPPER FITTINGS
Section 14. Gate Valves
Section 14 Gate Valves 221 A-Gate Brass Gate Valve S Brass Brass Brass Brass and Wheel Ductile Iron Threading ISO 228 Thread BSP 180 C 16 bar General Purpose Brass Gate Valve AGVFF/015 15 43 85 50 0.24
Specification for: Merck. Project: Caustic Tank. Elkton, VA. Title PIPING SPECIFICATIONS. Jacobs Project No. 63PZ0234. Client Number.
Specification for: Merck Project: Caustic Tank Elkton, VA Document No: 63PZ0234-B-SP-15101SP101S Title PIPING SPECIFICATIONS Jacobs Project No. 63PZ0234 Client Number. Jacobs Discipline Lead Jacobs Project
MFP14, MFP14S and MFP14SS Automatic Pumps
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Rate B standard. Rate A Rate A option. max +260 C/ min -40 C
of carbon steel 315 -series C ont R o L Description Edition 30-03-2015 The welded butterfly valve 315 is used for example in district heating, district cooling and industry. It can be used as an on-off
Cast Iron Valves. Product Information. It s all at Albion
Cast Iron Valves Product Information It s all at Albion ART 77-78 Cast Iron Ball Valve Flanged Ends Flange Mounting PN16 Only ISO 5211 Direct Mount (Not 200mm) Art 77/78 Plated Brass/Stainless Ball BS
HYDRAULIC CONTROL VALVES
HYDRAULIC CONTROL VALVES The automatic control valves are diaphragm valves designed to provide hydraulically driven solutions to pressure, flow and level control applications. Features: Main valve uses
CHECK VALVES. Bolted Bonnet - Full Opening - Pressure Seal - Wafer Dual Plate, Single Plate & Tilting Disc.
A Long Experience in Energy Equipment and one Goal: The Customer s satisfaction. CHECK VALVES Bolted Bonnet - Full Opening - Pressure Seal - Wafer Dual Plate, Single Plate & Tilting Disc. Swing Check Valves
M21Ti ISO Reduced Bore Ball Valve for the Tobacco Industry DN15 to DN150 Flanged PN40
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
PIPE, FITTINGS & VALVES PRODUCT CATALOGUE RETICULATION MAR 2015 PRODUCT CATALOGUE RETICULATION S&T157
S&T157 PRODUCT CATALOGUE RETICULATION MAR 2015 PRODUCT CATALOGUE RETICULATION PIPE, FITTINGS & VALVES CONTENTS Introduction 2 General Purpose Pipe 3 Fire Protection Pipe 5 Pipe Wall Thickness and Weights
Section 2. Shurjoint Grooved Fittings Flow Data / Friction Resistance Ductile Iron Grooved Fittings. Wrought Grooved Fittings
Section 2 Cast & Wrought Grooved Fittings Shurjoint Grooved Fittings... 56 Flow Data / Friction Resistance... 56 Ductile Iron Grooved Fittings 7110 / 7111 / 7112 / 7113 Elbows... 57 7120 / 7135 / 7130
PIP PN03SA0B01 Piping Material Specification 3SA0B01 Class 300, 304/304L Stainless Steel, Butt Weld, C.A., Lube Oil & Seal Oil
May 2016 Piping PIP PN03SA0B01 Piping Material Specification 3SA0B01 Class 300, 304/304L Stainless Steel, Butt Weld, 0.000 C.A., Lube Oil & Seal Oil PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an
ASME 350 BAR SAE 690 BAR
GENERAL HYDRAULIC PIPES 10-40 BAR SAE 50 BAR SAE 3000 PSI SAE 6000 PSI DIN 350-400 BAR SCHEDULE SERIE SAE 3000 PSI 1 SAE 6000 PSI ASME 350 BAR Product Page GS-ASME s 350 bar 203 SAE 690 bar - Grooving
EXTRACTION CHECK VALVES TYPE C09.6
Application Extraction check valves are valves used to to prevent the back flow of the service fluid in extraction and bleed lines of steam turbines. Each extraction check valve is designed exactly for
KVC VALVES AND PEX FITTINGS
KVC VALVES AND PEX FITTINGS 2011 KVC VALVES & PEX FITTINGS CATALOGUE 2 P a g e Table of contents 1. Cast Steel Valves..4 FIG. 272-CS-15 ( Gate ).....5 FIG. 272-CS-300 ( Gate )......6 FIG. 272-CS-600 (
P I P E F I T T I N G S 2002
PIPE FITTINGS 02 INTRODUCTION PIPE FITTINGS 02 OneSteel is Australia s largest distributor of Pipes, Pipe Fittings, Valves and associated accessories. The OneSteel distribution network offers more than
PNEUMATICALLY ACTUATED 2-WAY
482 DN 25-65 The 482 diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic efficiency by increasing
BALL VALVE CATALOGUE //
BALL VALVE CATALOGUE // The Fort Vale Range of Ball Valves CATALOGUE REVISION_01-27.01.1 Fort Vale Engineering Ltd. 201 THIS PAGE IS INTENTIONALLY BLANK BALL VALVE CATALOGUE // CONTENTS // AIRLINE BALL
STANDARDS and SPECIFICATIONS
ANSI (American National Standards Institute) ANSI B31.4 - Liquid petroleum transportation piping system. ANSI B31.4 - Gas transmission and distribution piping system. API (American Petroleum Institute)
Forged High Pressure Pipe Fittings
Forged High Pressure Pipe Fittings Forged High Pressure Pipe Fittings Pressure Class Socket Weld Forged Fittings Products Dimension Specifications Pressure Class Threaded Forged Fittings Products Dimension
PF6 Stainless Steel Piston Actuated On/ Off Valves
Page of TI-P7- CH Issue Cert. No. LRQ 9 ISO 9 PF Stainless Steel Piston Actuated On/ Off Valves Description A -port pneumatically actuated on / off stainless steel valve for use on steam, water, air, oil
ISO-DE Double Eccentric Butterfly Valves
ISO-DE Double Eccentric Butterfly Valves Engineering Creative Solutions for Fluid Systems Since 1901 401 South Highland Avenue Aurora, Illinois 60506-5563 www.henrypratt.com phone: 630.844.4000 moreinfo@henrypratt.com
R o L. BUTTERFLY VALVE of carbon steel with flanges series BLUE LINE. Operation. Edition
of carbon steel 31500 series C ont R o L Operation Edition 03-0-009 The welded butterfly valve 31500 is used for example in district heating, district cooling and industry. It can be used as an on-off
BUTTERFLY VALVE WAFER TYPE of carbon steel 311 ( ) series
Operation WAFER TYPE of carbon steel 311 (310-312) series C ont R o L Description Edition 23-07-2015 Wafer type butterfly valve 311 (310 312) series is used in industrial pipelines for demanding on-off
Control Components Pty Ltd. PO Box 212 Caringbah NSW 1495 Sydney Australia ph: +61 (0) fx: +61 (0)
ABN 24 8 175 293 PO Box 212 Caringbah NSW 1495 Sydney Australia ph: +61 ()2 9542 8977 fx: +61 ()2 9542 7978 www.controlcomponents.com.au Magnetic Visual Level Indicators made in Australia under licence
Forged steel High temperature steel Stainless steel BR 640 / BR 641 (Y) Page 2. with system connectors. Stainless steel BR 642 / BR 643 (Y) Page 4
Thermodynamic steam traps TRACO CONA TD Thermodynamic steam trap PN40 - with flanges (BR 640/641...1) - with screwed sockets (BR 640/641...2) - with socket weld ends (BR 640/641...3) - with butt weld ends
PIP PN01SV0S01 Piping Material Specification 1SV0S01 Class 150, Alloy 254 SMO (UNS S31254), Socket Weld, C.A., Process (PTFE Packing/Gaskets)
May 2016 Piping PIP PN01SV0S01 Piping Material Specification 1SV0S01 Class 150, Alloy 254 SMO (UNS S31254), Socket Weld, 0.000 C.A., Process (PTFE Packing/Gaskets) PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES
Instruction Manual for UPPPU
Instruction Manual for UPPPU Contents 1. Product Overview 2. Operations 3. Installation & Commissioning Instructions 4. Bill of Material 5. Maintenance and Troubleshooting 6. Storage 1.Product Overview:-
NELES HIGH PERFORMANCE TRIPLE ECCENTRIC DISC VALVE, METAL SEATED NELDISC SERIES L12
NELES HIGH PERFORMANCE TRIPLE ECCENTRIC DISC VALVE, METAL SEATED NELDISC SERIES L12 Metso's Neles Neldisc series L12 a wafe type, metal seated high performance triple eccentric disc valve. With close to
MLS Meter Leveling Saddle. Parts List
Meter Leveling Saddles Meter Level Saddle is an accepted means to support chart recorders on meter runs or as an economical means to support pipe runs. Rugged Ductile Iron Construction Standard " Meter
700E Wafer with support lugs 700K Wafer with support lugs 700S Wafer with support lugs
Large Diameter Rubber Seat Butterfly Valves for General Use E Wafer with support lugs Wafer with support lugs Wafer with support lugs Worm Gear Pneumatic Cylinder Motorized Features and Benefits Simple
APT14 Automatic Pump Trap Installation and Maintenance Instructions
6120250/7 IM-P612-04 ST Issue 7 APT14 Automatic Pump Trap Installation and Maintenance Instructions 1 Product information 2 Operation 3 Installation Closed loop steam systems only 4 Commissioning 5 Maintenance
505F Multi-Port Ball Valve
505F Multi-Port Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial Corrosion Resistant Applications The 505F Series Ball Valve The 505F is a true multi-way
BUTTERFLY VALVE TRIPLE ECCENTRIC BUTTERFLY VALVE
Triple Eccentric Butterfly Valve provides a tight shut-off performance. This geometry ensures that the disc seal contacts the body seat only at the final shut-off position without rubbing or galling, providing
Plain Ended Welding Fittings BS 4825 Part 2
Plain Ended Welding Fittings BS 4825 Part 2 Alchem offer a wide range of plain ended weld fittings to suit both hygienic and pharmaceutical applications. These include bends, tees, and reducers, both concentric
PIPE & PIPE FITTINGS BOOK MAY 2016 PIPE & PIPE FITTINGS BOOK
PIPE & PIPE FITTINGS BOOK MAY 2016 PIPE & PIPE FITTINGS BOOK May 2016 Introduction Quality Fletcher Easysteel continues to maintain a strong commitment to the principles which have become total quality