Model descriptions. Technical data. Pressure and Temperature Limits Models 19, 20, 20P: -60 to 406 F Models 19M, 20M, 20MP:
|
|
|
- Quentin Paul
- 6 years ago
- Views:
Transcription
1 VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Non-code Bronze Liquid Relief Valves Model descriptions Model 20 Model 19: All bronze, equipped with handwheel for easy adjustment within spring ranges. Model 19M: Same as model 19 except SS trim (seat and disc). Available 2 1 /2" and 3" only. For higher pressure settings or severe applications. Model 20: All bronze, with pressure-tight cap. Suitable for maximum back pressure of 50 psig. 1 Model 20M: Same as model 20 except SS trim. Available in 2 1 /2" and 3" only (seat and disc). For higher pressure settings or severe applications. Maximum back pressure of 50 psig. 1 Model 20P: Same as model 20 except with packed lift lever. Suitable for maximum back pressure of 50 psig. 1 Model 20MP: Same as model 20M except with packed lift lever. Maximum back pressure of 50 psig. 1 Model 200A: Special non-chattering design. Recommended for light oils and continuous by-pass or pressure regulation. UL842 listed for light oil service. Available 3 /4" to 1 1 /2" sizes. Female NPT connections only. Model 200H: Same as model 20. UL842 listed for use with fuel oils. Available 3 /4" to 2" sizes Options Available with optional female NPT inlet or flanged inlet and outlet connections. Model 19 Variation 10: 1 to 150 psig adjustable spring range Variation 11: 151 to 300 psig adjustable spring range Model 20-D Variation 05: 50 to 150 psig spring range Variation 06: 100 to 300 psig Features Both inlet and outlet connections are cast integral with body to permit easy inspection and servicing without disconnecting piping. Beveled seats lapped for optimum performance. Stainless Steel (SS) spring for optimum corrosion resistance. Each Kunkle valve is tested and inspected for pressure setting and leakage. Technical data Pressure and Temperature Limits Models 19, 20, 20P: 1 to 300 psig -60 to 406 F Models 19M, 20M, 20MP: 1 to 500 psig -60 to 406 F Models 200A, 200H: 1 to 200 psig -60 to 406 F Applications Non-code liquid relief. Overpressure relief and protection of pumps, tanks, lines and hydraulic systems. Note: 1. Back pressure increases set pressure on a one to one basis, and reduces capacity. Back pressure in excess of 10% of set pressure is not recommended. KUKMC-0376-US-1312 Copyright 2013 Pentair
2 Parts and Materials Model 19, 19M Models 20, 200H with Pressure Tight Cap 3 Model 200A Parts and Materials No. Part Name 19, 19M 20, 20M, 20P, 20MP, 200A, 200H 1 Body1 Bronze B62 Bronze B62 2 Stem Retainer Brass B16 Brass B16 3 Disc Bronze B584 Alloy ,3 Bronze B584 Alloy ,3 4 Spring Step Brass B16 Brass B16 5 O-ring Teflon Teflon 6 Spring SS 316 or 17-7 SS 316 or Stem Brass B16 Brass B16 8 Bonnet Bronze B584 Alloy Bronze B584 Alloy Jam Nut Steel A108 Zinc Plated Brass B16 10 Compression Screw Brass B16 Brass B16 11 Cap N/A Brass B16 12 O-ring N/A BUNA-N 13 Drive Screw 6 SS Commercial SS Commercial 14 Handwheel Iron A126 Zinc Plated 5 N/A Notes: 1. Flanged connections optional. 2. Models 19, 20, 20P, 200H are brass, B283, Alloy 485, for 1 /2", 3 /4", and 1". 3. Models 19M, 20M, and 20MP are SS A743-CF8. 4. Model 200A is brass B Bronze B584 Alloy for 1 /2", 3 /4", 1 1 /4". 6. Not used on bonnet for 2 1 /2" and 3". page 2 KUKMC-0376-US-1312 Copyright 2013 Pentair
3 Parts and Materials Models 19M, 20M and 20MP 2 1 /2" Seat Configuration Models 19M, 20M and 20MP 3" Seat Configuration Parts and Materials No. Part Name Material 15 Retainer Washer SS PH15-7MO 16 Stem End SS A Ball SS A Insert SS A743 GR CF8 19 O-ring Teflon Models 20MP and 20P With Lever Parts and Materials No. Part Name 20P, 20MP 20 Lift Cam SS A Cotter Pin Steel 22 Lever Steel A108 Zinc Plated 23 Drive Screw SS Commercial 24 Retainer Cam Brass B16 25 O-ring BUNA-N 26 Cap Bronze B584 Alloy Lift Nut Steel A108 Copyright 2013 Pentair KUKMC-0376-US-1312 page 3
4 Liquid Relief Valves Specifications Size Min/Max Min/Max Approximate Inlet/Outlet Set Pressure, (psig 1 ) Temp. Wt., (lb) NPT, (in) 19, 20, 20P 200A, 200H 19M, 20M, 20MP ( F) Notes: 1. All flanges rated per ANSI B Standard with 3 /4" outlet - 1 /2" outlet optional. 1/2 2 1/300-60/ /4 3/4 1/300 1/200-60/ /4 1 1/300 1/200-60/ /2 1 1 /4 1/300 1/200-60/ /2 1/300 1/200-60/ /4 2 1/300 1/200-60/ /2 1/300 1/500-60/ /300 1/500-60/ C F Dimensions Valve Model Threaded 150/300 Flange A B C D E F 1/2" Size /8 6 1 /8 3 5 / / / /8 5 7 /8 3 5 / / /4 20P /8 7 3 /8 B E A Models 19, 19M D 3/4" Size /8 6 1 /8 3 5 / / / /8 5 7 /8 3 5 / / /4 20P /8 7 3 /8 3 5 / / /4 200A /8 5 7 /8 200H 1 15 / /8 5 7 /8 3 5 / / /8 1" Size /4 1 7 /8 7 1 /8 3 7 / / / /4 1 7 /8 6 3 /4 3 7 / / /8 20P 2 1 /4 1 7 /8 8 3 /4 3 7 / / /2 200A 2 1 /4 1 7 /8 6 3 /4 200H 2 1 /4 1 7 / / / /16 8 B E C F Models 20, 20M, 200A, 200H A D Dimensions are for reference only. C F A D B E Models 20P, 20MP page 4 KUKMC-0376-US-1312 Copyright 2013 Pentair
5 Liquid Relief Valves B E C F A Models 19, 19M B E A D C F Models 20, 20M, 200A, 200H D Dimensions, inches Valve Model Threaded 150/300 Flange A B C D E F 1 1 /4" Size /8 2 1 / / / / / /8 2 1 / / / / /8 20P 2 5 /8 2 1 / / / A 2 5 /8 2 1 / /8 200H 2 5 /8 2 1 / / / / /8 1 1 /2" Size / /8 8 5 /8 4 1 /8 4 1 / / / /8 8 5 /8 4 1 /8 4 1 /8 9 1 /4 20P 2 11 / /8 9 1 /4 4 1 /8 4 1 / /4 200A 2 11 / /8 7 7 /8 200H 2 11 / /8 7 7 /8 4 1 /8 4 1 /8 9 1 /2 2" Size / / /8 4 1 /4 4 1 / / / / /8 4 1 /4 4 1 / /8 20P 3 1 / / /2 4 1 /4 4 1 / /8 200H 3 1 / / / /2 4 1 / / /2" Size / /8 4 3 /4 4 3 / M 3 7 / /8 4 3 /4 4 3 / / / /4 4 3 / /16 20M 3 7 / /4 4 3 / /16 20P 3 7 / /2 4 3 /4 4 3 / /4 20MP 3 7 / / /4 4 3 / /16 3" Size C A F D /8 3 7 / / /8 19M 4 5 /8 3 7 / / / /8 3 7 / / /4 20M 4 5 /8 3 7 / / /8 20P 4 5 /8 3 7 / / /8 20MP 4 5 /8 3 7 / / /4 Dimensions are for reference only. B E Models 20P, 20MP Copyright 2013 Pentair KUKMC-0376-US-1312 page 5
6 Models 19, 19M, 20, 20M, 20MP, 20P and 200H Capacities Liquid Relief Valves Non-code Liquid Capacity - 25% Accumulation (GPM) Set Pressure Valve Inlet and Outlet Size (psig) 1/2" 3/4" 1" 1 1 /4" 1 1 /2" 2" 2 1 /2" 3" Note: 1. Liquid Overpressure Factors To determine capacities at other than 25% overpressure/accumulation, multiply capacity shown by: 10% Acc. = % Acc. = % Acc. = 0.9 page 6 KUKMC-0376-US-1312 Copyright 2013 Pentair
7 Models 19, 19M, 20, 20M, 20MP, 20P and 200H Capacities Liquid Relief Valves Non-code Liquid Capacity - 25% Accumulation (GPM) Set Pressure Valve Inlet and Outlet Size (psig) 1/2" 3/4" 1" 1 3 /4" 1 1 /2" 2" 2 1 /2" 3" Note: 1. Liquid Overpressure Factors To determine capacities at other than 25% overpressure/accumulation, multiply capacity shown by: 10% Acc. = % Acc. = % Acc. = 0.9 Copyright 2013 Pentair KUKMC-0376-US-1312 page 7
8 200A Capacities at 25%, 50%, 75% and 100% Accumulation (GPM) Model 200A D - 3 /4" Model 200A E - 1" Overpressure psi 25% 50% 75% 100% Overpressure psi 25% 50% 75% 100% page 8 KUKMC-0376-US-1312 Copyright 2013 Pentair
9 200A Capacities at 25%, 50%, 75% and 100% Accumulation (GPM) Model 200A F /4" Overpressure psi 25% 50% 75% 100% Model 200A G /2" Overpressure psi 25% 50% 75% 100% Copyright 2013 Pentair KUKMC-0376-US-1312 page 9
10 Model Number/Order Guide Model Number Position Example F 0 1 M G Model M M 020P 20MP 200A 200H Inlet Size C - 1 /2" G /2" D - 3 /4" H - 2" E - 1" J /2" F /4" K - 3" Variation See chart page 11 Design Revision Indicates non-interchangeable revision. Dash (-) if original design. Spring Material G SS H SS (only for Model 19M-K 300 psig or greater) Set Pressure psig psig psig page 10 KUKMC-0376-US-1312 Copyright 2013 Pentair
11 Variation 1/2" Male x 3 /4" Female 1/2" Male x 1 /2" Female 1/2" Female x 3 /4" Female Male x Female with Gag 1/2" Female x 1 /2" Female 1/2" 150 Flg x 1 /2" 150 Flg 1/2" 300 Flg x 1 /2" 150 Flg Male x Female Female x Female (200A) Female x Female 150 Flg x 150 Flg 300 Flg x 150 Flg (200H) 300 Flg x 150 Flg 150 Flg x 150 Flg (200H) 3/4" 300 Flg x 3 /4" 150 Flg (020P-D) Model - Inlet Size Inlet x Outlet C, 20-C, 20P-C 1/2" x 1/2" (3/4") X X X X X X 19-D, 20-D 3/4" x 3/4" X X X X 200A-D 3/4" x 3/4" X 200H-D 3/4" x 3/4" X X X X 19-E, 20-E, 20P-E 2 1" x 1" X X X X 200A-E 1" x 1" X X 200H-E 1" x 1" X X X X 19-F, 20-F, 20P-F 2 11/4" x 11/4" X X X X 200A-F 11/4" x 11/4" X 200H-F 11/4" x 11/4" X X X X 19-G, 20-G, 20P-G 2 11/2" x 11/2" X X X X 200A-G 11/2" x 11/2" X 200H-G 11/2" x 11/2" X X X X 19-H, 20-H, 20P-H 2 2" x 2" X X X X 200H-H 2" x 2" X X X X 19-J, 19M-J, 20J, 20P-J, 20M-J, 20MP-J 21/2" x 21/2" X X X X 19-K, 19M-K, 20-K, 20P-K, 20M-K, 20MP-K 3" x 3" X X X X 20P-D 3/4" x 3/4" X X X X X Notes: 1. Not available for 20P-C 2. Variation 04 not available for 20P-E, 20P-F, 20P-G, and 20P-H Copyright 2013 Pentair KUKMC-0376-US-1312 page 11
12 MODELS 1 AND 2 BRASS SAFETY VALVES VALVES & CONTROLS 5500 WAYZATA BLVD # 800, MINNEAPOLIS, MN KUNKLE FACILITY PHONE: All Pentair trademarks and logos are owned by Pentair, Ltd. All other brand or product names trademarks or registered marks of their respective owners. Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice. Pentair is an equal opportunity employer. page 12 KUKMC-0376-US-1312 Copyright 2013 Pentair
KUNKLE MODELS 19/19M/20/20M/20P/20MP/200A/200H LIQUID RELIEF VALVES SAFETY AND RELIEF PRODUCTS
Extra-heavy rugged construction non-code bronze liquid relief valves with a variety of model options to meet specific applications FEATURES Inlet and outlet connections cast integral with body for easy
Model descriptions. 2. For other pressure and temperature limits, consult ANSI B16 cast iron flange standards.
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Cast Iron Liquid Relief Valves Model 228 Model descriptions Model 91: Bronze trim, with pressure-tight cap. Suitable for maximum back pressure of 60
Cast Iron Liquid Relief Valves
Cast Iron Liquid Relief Valves Features Bolted bonnet permits easy inspection and servicing without removal from system. Quality cast iron body and bonnet, insert and disc are available in either bronze
Kunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 228 Features Bolted bonnet allows easy inspection and servicing without removal from
Kunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 8 Features Bolted bonnet allows easy inspection and servicing without removal from
Model descriptions. Technical data. Pressure and Temperature Limits Model 6252: 10 to 250 psig [0.7 to 17.2 barg] -20 to 406 F [-28 to 208 C]
![Model descriptions. Technical data. Pressure and Temperature Limits Model 6252: 10 to 250 psig [0.7 to 17.2 barg] -20 to 406 F [-28 to 208 C]](/thumbs/76/73640006.jpg "Model descriptions. Technical data. Pressure and Temperature Limits Model 6252: 10 to 250 psig [0.7 to 17.2 barg] -20 to 406 F [-28 to 208 C]")
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS ASME Section I Steam and ASME Section VIII, Air, Steam and Gas UV National Board Certified. Model 6254 ASME Section IV HV, National Board Certified.
KunKle SAFETY AND RELIEF VALVE PRODUCTS OVERVIEW
KunKle SAFETY AND RELIEF VALVE PRODUCTS OVERVIEW ISSUED NOVEMBER 2012 KunKle SAFETY AND RELIEF VALVE PRODUCTS OVERVIEW Contents Models 1 and 2 Brass Safety Valves... 4 Models 19, 19M, 20, 20M, 20P, 20MP,
KUNKLE Safety and Relief ValVe PRoductS overview
KUNKLE Safety and Relief ValVe PRoductS overview april 2015 KUNKLE Safety and Relief ValVe PRoductS overview Contents Models 1 and 2 Brass Safety Valves... 4 Models 19, 19M, 20, 20M, 20P, 20MP, 200A and
Models 910, 911, 916, 917, 920, 921, 927 ASME Section VIII, Air/Gas/
Models 910, 911, 916, 917, 920, 921, 927 ASME Section VIII, Air/Gas/ Steam/Liquid, UV National Board Certified. Also available for Vacuum Service Model 921: Steel body and bonnet with plain lift lever
CASH VALVES TYPE G-4 PILOT OPERATED PRESSURE REDUCING REGULATOR FOR STEAM, AIR AND GASES
Self-actuating pilot operated pressure reducing valve handling air, gas, and steam and accurate to within 1 /2% up to 3" and 1% for larger sizes. Description The G-4 regulator is a self-actuating pilot
Kunkle Models 189/363/389 safety valves Safety and relief products
Heavy duty ASME Section VIII, air/gas cryogenic, UV, National Board certified safety valves Model 189 Features Heavy duty construction provides long service life. Unique three-piece disc assembly with
Model descriptions. Applications
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Models 910, 911, 916 and 917 ASME Section VIII, Air/Gas/Steam/Liquid, UV National Board certified. Models 920, 921 and 927 ASME Section I Special use
CASH VALVES TYPE G-60 HIGH CAPACITY PRESSURE REGULATOR
The Type G-60 is a high capacity all purpose regulator designed to operate within close operating limits. Application Type G-60 regulators are designed for use with steam, water, air, oil, gases, chemicals
Kunkle Safety and Relief Products Models 6252 and 6254
ASME Section I Steam and ASME Section VIII, Air, Steam and Gas UV National Board Certified. Model 6254 ASME Section IV HV, National Board Certified. PED Certified for Non-Hazardous Gas. Features Heavy
Safety and Relief Valves Product Overview
Safety and Relief Valves Product Overview Kunkle Valve is a leading supplier of Safety and Relief Valve Products for industrial and commercial applications, such as steam boilers, air, or non-hazardous
Models 912, 913, 918, 919 ASME Section VIII, Steam/Air/Gas/Liquid, UV National Board Certified. Also available for Vacuum Service.
Models 912, 913, 918, 919 ASME Section VIII, Steam/Air/Gas/Liquid, UV National Board Certified. Also available for Vacuum Service. Pressure and Temperature Limits Models 912, 913, 918, 919 Steam 3 to 250
The 7100B Series is designed to protect low pressure storage tanks and systems from being overpressured. Introduction
VALVES & CONTROLS VAREC 00B SERIES The 00B Series is designed to protect low pressure storage tanks and systems from being overpressured. Introduction The Varec 00B Series is a pressure relief valve designed
Pressure Relief Valves. 1541/1543 Series. Consolidated Safety Valve
Pressure Relief Valves 1541/1543 Series Consolidated Safety Valve Table of Contents Conversion Table 1541/1543.2 Features & Benefits 1541/1543.3 Applications 1541/1543.3 Scope of Design 1541/1543.4 Materials
The PL Series Pressure Air Release Valves. Sizes 1 thru 6 Available Compound Lever System Adjustable Buna-N Rubber Plunger. Crispin.
The PL Series Sizes 1 thru 6 Available Compound Lever System Adjustable Buna-N Rubber Plunger Crispin Since 1905 PL SERIES Functio n Allows air and/or gas to be released from a pressurized liquid system
Product overview. Technical data
VALVES & CONTROLS ANDERSON GREENWOOD BLANKETING SYSTEMS The Complete Blanketing and Safety Valve System! Product overview Pad Valves Anderson Greenwood is a world leader in tank protection and blanketing.
* Contact your sales representative for compliance to NACE MR or later requirements.
VALVES & CONTROLS crosby SERIES 800, 900 OMNI-TRIM, AND BP OMNI-TRIM Crosby s Series 800 adjustable blowdown, Series 900 fixed blowdown OMNI-TRIM, and BP OMNI-TRIM full nozzle pressure relief valves have
Crosby Series 800 and 900 OMNI-TRIM Pressure Relief Valves. Flow Control
Crosby s Series 800 adjustable blowdown and Series 900 fixed blowdown OMNI-TRIM full nozzle pressure relief valves have a simplified, single trim design with superior application versatility. Features
Crispin. The UL Series Universal Air Release Valves. Compound Lever System NPT Screwed or ANSI Class Flanges Available.
The UL Series Universal Air Release s Compound Lever System NPT Screwed or ANSI Class Flanges Available Crispin Since 105 sales@crispinvalve.com Universal Air Release s Universal Air Release UL SERIES
* Contact your sales representative for compliance to NACE MR or later requirements.
VALVES & CONTROLS crosby SERIES 00, 00 OMNI-TRIM, AND BP OMNI-TRIM Crosby s Series 00 adjustable blowdown, Series 00 fixed blowdown OMNI-TRIM, and BP OMNI-TRIM full nozzle pressure relief valves have a
1541/1543 Series. Consolidated * Valves. Safety Valve
GE Oil & Gas Technical Specifications 11/2014 Consolidated * Valves 1541/1543 Series Safety Valve Designed for steam and other compressible fluids, these valves are most commonly used in pharmaceutical,
Kunkle Safety and Relief Products. Series 6000
ASME Section I and VIII, Steam, V and UV, ASME Section VIII, Air/Gas UV National Board Certified. Models 6933, 6934, and 6935 are ASME Section IV, Steam, HV National Board Certified. PED Certified for
SAFETY relief VALVE SERIES # 006 DESIGN FEATURES HARSHAD ENGINEERING WORKS HARSHAD ENGINEERING WORKS TECHNICAL DATA : ISO 9001 CERTIFIED COMPANY
PROVIDES HIGH QUALITY OVERPRESSURE PROTECTION FOR AIR, GAS, LIQUID & STEAM IN SINGLE STANDARDIZED DESIGN SAFETY relief VALVE DESIGN FEATURES SAFETY VALVE MANUFACTURED IN ACCORDANCE WITH REQUIREMENT OF
Pressure Relief Valves Series. Consolidated Safety Valve
Pressure Relief Valves 1511 Series Consolidated Safety Valve Consolidated Type 1511 safety valves are designed for low pressure, steam heating boilers and steam generators as well as air service applications.
High Pressure 2-way 2 1/2-6 Globe Valves
Overview Datasheet High Pressure 2-way 2 1/2-6 Globe Valves Designed to work with either an electronic actuator with a 3/4-inch (20 mm) or 1-1/2-inch (40 mm) stroke, the two-way globe valves are available
Approved. Size L H. 3" (76mm) 9-1/2" (241mm) 5-51/64" (147mm) 46. 4" (102mm) 11-1/2" (292mm) 6-45/64" (170mm) 81
pproved. Model: SD-NRV200CV Flanged Ends The Flanged End Check Valves are made of Iron Body, Bolted Bonnet and Horizontal Swing, painted with standard color. Epoxy coated inside and outside to WW C550
Spring loaded Thermal Relief Safety Valves, manufacturers standard Medium and high pressure
Series Thermal Relief Safety Valves Spring loaded Thermal Relief Safety Valves, manufacturers standard Medium and high pressure Applications The Sempell series provides a complete and comprehensive range
Kunkle Safety and Relief Products
ASME Section I and VIII, Steam, V and UV, ASME Section VIII, Air/Gas UV National Board Certified. Models 6933, 6934, and 6935 are ASME Section IV, Steam, HV National Board Certified. PED Certified for
A-C Fire Pump. Fitting and Accessories A-C 100A
A-C Fire Pump Fitting and Accessories A-C 100A A-C Fire Pump Fitting and Accessories Table of Content Page Automatic Air Release Valve... 1 Suction And Discharge Gauge Assembly... 2 Casing Relief Valve...
US SERIES. Universal Sewer Valves. Universal Sewer Valves. Valve Function. Features Include
Valve Function Exhausts air as a pipeline fills, and allows air in as pipeline drains Allows accumulating air to escape while line is in operation Features Include Standard and short body series available
P99 Pressure Reducing Regulator
P99 Pressure Reducing Regulator Applications City / District gate operation Commercial buildings Boilers, furnace, oven Plant air service Features 5 Pilot choices for low to extra high pressure Up to 1,000
MERCER VALVE 1400 SERIES THINK...MERCER FIRST MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY
MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY 1400 SERIES MERCER VALVE THINK...MERCER FIRST 1400 Series Product Overview The 1400 Series is a safety relief valve designed for lower capacity systems. The
Crosby Series BP OMNI-TRIM Pressure Relief Valves for applications involving variable back pressure.
CROSBY Crosby Series BP OMNI-TRIM Pressure Relief Valves for applications involving variable back pressure. Features The balanced piston design offsets the effects of variable back pressure on valve set
Compact wafer-style design and round unobstructed port tackle many tough applications.
VLVES & CONTROLS Compact wafer-style design and round unobstructed port tackle many tough applications. Features Minimizes piping support with the compact wafer style body. The Prince wafer check valves
Installed on the pump suction, CRISPIN Foot Valves prevent the
Foot Valves Crispin Foot Valves SERIES Valve Function Maintains pump prime upon pump outage Features Resilient seat provides positive shut off Full flow area Stainless steel inlet screen Rugged construction
MODEL 5540 CONTENTS. Installation, Operation and Maintenance Instructions 1.0 GENERAL
Installation, Operation and Maintenance Instructions MODEL 5540 Sep 20 CONTENTS.0 GENERAL. Model Number---------------------------------------------------------------------------------------------------------------
The Universal Sewer Air Release Valve is designed to permit
Universal Sewer Valves Universal Sewer Valves Valve Function Exhausts air as a pipeline fills, and allows air in as pipeline drains Allows accumulating air to escape while line is in operation Features
KENNEDY VALVE KS-RW RESILIENT WEDGE VALVES
KENNEDY VALVE KS-RW RESILIENT WEDGE VALVES KENNEDY VALVE AWWA C515 Resilient Wedge Gate Valves Meet or Exceed the Requirements of AWWA Standard C515 UL-262/FM-1120/1130 ULC-Underwriters of Canada 2 1/2
Industrial Bronze and Iron Price List
Industrial Bronze and Iron Price List TABLE OF CONTENTS IBI-1017 Effective: October 2, 2017 Revised: 12/07/2017 Suggested list prices are subject to change without notification. Visit our Website for the
Index. Butterfly Valves
Dry Bulk - Chemical - Petroleum Dry Bulk - Chemical - Petroleum Nozzles Nozzles & Valves & Index Index Part No. Description Page Nozzles P- 202 Overwing Aircraft Refueling, Bronze 1 P- 2022 Overwing Aircraft
SV80H Safety and Relief Valves
Page 1 of 18 BR Rev.02 U SH Safety and Relief alves Description The SH is a full nozzle safety and relief valve with orifices D to T, comply with the API STD 526, beyond others with super capacity. Suitable
STC Manual & Actuated Process Valves
STC Manual & Actuated Process Valves Fine Quality Precision Engineered Excellent Prices Advanced Design connects fluid power to industrial automation Table of Contents STC Valve Numbering System.......2
Anderson Greenwood Series 5100 Pilot Operated Pressure Relief Valves
ANDERSON GREENWOOD Series 5100 Modulating Safety Relief Valve Anderson Greenwood has developed the revolutionary Series 5100 specifically to serve Economizer applications requiring pressure relief under
3-way 1/2-2 Globe Valves
Datasheet Overview Designed to work with either an electronic actuator with a 3/4-inch (20 mm) stroke, the three-way globe valves are available in ANSI Class 250 for normally closed or normally open action.
Vacuum Relief Performance Curves
Vacuum Relief Valves Crispin Vacuum Relief Valves Valve Function llows air to enter system when vacuum occurs Prevents air exhaustion during pump start-up Features Cracks open to admit air at.25 PSIG differential
TECHNICAL INSTRUCTIONS Heavy Duty Bronze Series
HEAVY DUTY BRONZE CONTROL S TECHNICAL INSTRUCTIONS Heavy Duty Bronze Series Form TI593UBS HEAVY DUTY BRONZE SERIES DESCRIPTION The Flowrite II Heavy Duty Bronze Series are designed for low cost modulating
EFC. Electronically Adjustable Proportional Pressure Compensated Flow Control
Engineering & Manufacturing Solutions Specifications: See flow chart for capacity. 3000 psi (207 bar) rating. Weighs 8-1/2 lbs. (3.9 kg). Standard Port size #12SAE (1-1/16 12). 10-Micron Filtration Recommended.
VALVES & CONTROLS ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS LARGE BORE INTELLIMOUNT SYSTEM
VALVES & CONTROLS ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS Stabilized Connector (Futbol) System, The next generation of manifold systems Product overview The Large Bore IntelliMount direct mount manifold
Phone (toll-free): (888) Phone (local): (973) Fax: (973) Web:
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model BPS-05-NPT Stainless Steel Back Pressure Regulator Valve
Series Pressure Relief Valves 197C
Series 2700 Pressure Relief Valves 197C Table of Contents General Description...IFC Ordering Information & Numbering System...1 Bill of Materials-Conventional...2 Bill of Materials-Balanced Design...3
MCF BALL VALVES OVERVIEW
MCF BALL VALVES OVERVIEW ISSUED JULY 2014 MCF BALL VALVES OVERVIEW THE CENTER OF MCF MODULAR THREE-PIECE VALVE CONSTRUCTION, ISO 5211 TYPE BODY CONFIGURATION, ACCOMMODATES A WIDE CHOICE OF SEATS, SEALS,
Fabricated Bevel Gear Operator Bi-Directional Metal Seat 150 PSI Bi-Directional Resilient Seat 150 PSI
Knife Gate Valves Uni-Directional (Metal Seated) Manual Handwheel Style KGV...2 Carbon Steel Technical Data 150 PSI 2 24...3 304 Stainless Steel Technical Data 150 PSI 2 24...3 316 Stainless Steel Technical
ELECTRICALLY ACTUATED DOUBLE SEATED IRON - 1 1/2-2
u APPLICATION: Control of Saturated Steam; Water; Water & Glycol Solutions. Seat Leakage Class ANSI III. u CONSTRUCTION: Body: Trim: Stem: Bonnet: Packing: ANSI B16.15 Iron 250lb.Threaded (NPT) EQ%, 300
Series Low Pressure Steam Heating Boiler Safety Valves
12-200 Series Low Pressure Steam Heating Boiler Safety Valves Section IV Heating Boilers Medium capacity safety valves protect ASME Section IV low pressure steam heating boilers. Cast bronze, full nozzle
304C. Valve Group. Series Farris Engineering Pressure Relief Valves
304C Valve Group Series 600 Farris Engineering Pressure Relief Valves Type Numbering System Our type numbering system simplifies the selection and specifying of Farris pressure relief valves because the
Kunkle Series 900 safety relief valves safety and relief products
Bronze, steel and stainless steel safety relief valves for air, gas, steam, liquid and vacuum service that meet ASME Section VIII, UV ; Section I, V, are National Board certified and PED certified for
Self-Operating Temperature Regulators
Self-Operating Temperature Regulators Remote Bulb for Heating, Cooling, Mixing and By-Pass Applications Powers # Regulators With Powers # Self-Operating Temperature Regulators, you no longer need external
Full Range Pressure Compensating Variable Flow Control
Engineering & Manufacturing Solutions Specifications: See flow chart for capacity. Rated for 3000 psi (207 bar). Weighs 7- ¾ lbs. (3.52 kg). 30-Micron Filtration Recommended. Torque to turn side lever
Screwed Bonnet Needle Valves. Needle Valves
89 Design & Features Hard (Vee) or Delrin Soft Seat/Tip Orifice sizes from.172 to.438 in. Flow Coefficients (Cv) from.37 to 2.7 Straight or angle flow patterns Optional panel mount Handle options available
Crosby Style JQ Pressure Relief Device. Flow Control
Designed in collaboration with the, Inc. the Crosby JQ is designed with internal parts completely isolated from corrosive fluids and environments. The Crosby Style JQ pressure relief device was designed
Brass, Bronze, Iron and Stainless Steel Valves
Price Schedule June 1, 2011 Supersedes BIV-01-11 07 Brass, Bronze, Iron and Stainless Steel Valves ASTM B283 FORGED BRASS SCREW-IN BONNET NON-RISING STEM SOLID WEDGE DISC 125 WSP/200 WOG BRONZE GATE VALVES
197C. Valve Group. Series Farris Engineering Pressure Relief Valves
97 Valve Group Series 700 Farris Engineering Pressure Relief Valves Numbering System Selecting and specifying Farris pressure relief valves is simple using the numbering system that follows. Each digit
AN ISO 9001:2008 CERTIFIED COMPANY. Safety Valve
AN ISO 9001:2008 CERTIFIED COMPANY Safety Valve SAFETY VALVE FEATURE : - The Cr-V spring & novel disc & seat design provide reliable bubble tight seal. - Excellent re-seating ability - It features heavy-duty
Cash Valve B SERIES PRESSURE REGULATORS. ISSUED - JANUARY 1999 CAVMC-0509-US-0208 ISO 9001 Certified
Cash Valve B SERIES REGULATORS ISSUED - JANUARY 1999 CAVMC-09-US-0208 ISO 9001 Certified GENERAL INFORMATION / REGULATORS B SERIES VALVES DESCRIPTION The Cash Valve Series B pressure reducing and regulating
Table of Contents. Introduction. Description. Greater Total System Efficiency. Improved Design. Easy Installation and Maintenance
Features & Benefits Table of Contents Features & Benefits................................................................ 13900.1 Scope of Design...................................................................
Model 912. Model 913: Full nozzle design. Bronze/brass body and bonnet. 316 SS trim (base, disc and disc holder).
Models, 3, and SME Section VIII, ir/steam/gas/liquid, UV National oard ertified. lso available for Vacuum Service. PED ertified for Non-Hazardous Gas. pplications ir/gas compressors - intercoolers - aftercoolers.
Industrial Bronze and Iron Price List
Industrial Bronze and Iron Price List TABLE OF CONTENTS IND-0217 Effective: February 1, 2017 Revised: 12/07/17 Suggested list prices are subject to change without notification. Visit our Website for the
Iron Check Valves Illustrated Index
Iron Check Valves Illustrated Index Iron Body Swing Check Valve Bronze Mounted or All Iron 125 lb. SWP 200 lb. CWP Iron Body Swing Check Valve Bronze Mounted 250 lb. SWP 500 lb. CWP Iron Body Silent Check
CASH VALVES TYPE G-4 PRESSURE REGULATORS
A self-actuating pilot operated pressure reducing valve handling air, gas and steam and accurate to within ½% up to 3" and 1% for sizes to 6 FEATURES Extremely compact design enables use of a smaller regulator.
Model 133 Models 134 & 135 AURORA 130 SERIES SINGLE STAGE TURBINE TYPE PUMPS
Model Models 4 & AURORA 0 SERIES SINGLE STAGE TURBINE TYPE PUMPS WWW.AURORAPUMP.COM AURORA 0 SERIES Single Stage Turbine Type Pumps Capacities to 0 G.P.M. Heads to 700 Ft. Temperatures to F A Pioneer in
Industrial Bronze and Iron Price List
Industrial Bronze and Iron Price List TABLE OF CONTENTS IND-0718 Effective: July 2, 2018 Revised: 08/06/2018 Suggested list prices are subject to change without notification. Visit our Website for the
Industrial Bronze and Iron Price List
Industrial Bronze and Iron Price List IND-0318 Effective: March 1, 2018 Revised: 08/06/2018 Suggested list prices are subject to change without notification. Visit our Website for the most up-to-date product
5100 Series Inline Relief Valve 10 to 2,400 PSIG
Fred C. Gilbert Co. 106 Norris Road Bakersfield, Ca. 93308 661-399-9569 fax 661-393-9654 5100 Series Inline Relief Valve 10 to 2,400 PSIG Features Zero Leakage to 95% of Cracking Pressure Positive Reseal
Industrial Bronze and Iron Price List
Industrial Bronze and Iron Price List IND-0718 Effective: July 2, 2018 Revised: 09/24/2018 Suggested list prices are subject to change without notification. Visit our Website for the most up-to-date product
W91/W94 Series TEMPERATURE REGULATORS. Self-Operated Temperature Regulators. Design & Operation W91 Non-Indicating W94 Dial Thermometer
Design & Operation W91 Non-Indicating W94 Dial Thermometer Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2010 Watson McDaniel Company CAPILLARY
SECTION Pressure & Temperature Control
16 Pressure & Temperature Control ARMSTRONG PRODUCT CATALOGUE 70 Pressure Reducing s Pressure Reducing s Armstrong pressure reducing valves (PRVs) and temperature regulators help you manage steam, air
MERCER VALVE SERIES Flanged THINK...MERCER FIRST MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY
9100 SERIES Flanged THINK...MERCER FIRST MERCER VALVE MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY 9100 Series Product Overview The Mercer Valve 9100 Series Pressure Relief Valve is State of the Art in
P200 Pressure Regulator
P200 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges P202 has internal relief valve for overpressure protection The P200 series pressure regulator is a manual, direct acting,
6SC SERIES MODELS 910F, 910FLW, 920F IRON SWING CHECK VALVE INSTALLATION OPERATION MAINTENANCE GUIDE
6SC SERIES MODELS 910F, 910FLW, 920F IRON SWING CHECK VALVE INSTALLATION OPERATION MAINTENANCE GUIDE DOCUMENT NO.: ES-1495 REVISION LEVEL: A ISSUED BY: Bill Hooks DATE: 09/25/13 APPROVED BY: DATE: APOLLO
Crosby Style JQ pressure relief device
A combination pressure relief device designed with internal parts completely isolated from corrosive fluids and environments Features Designed in collaboration with the Chlorine Institute, Inc. Provides
TEMPERATURE REGULATORS W91/W94 Series
Self-Operated Temperature Regulators Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2010 Watson McDaniel Company Self-Operating Design Indicating
9100 SERIES Flanged MERCER VALVE THINK...MERCER FIRST
9100 SERIES Flanged MERCER VALVE THINK...MERCER FIRST 9100 Series Product Overview The Mercer Valve 9100 Series Pressure Relief Valve is State of the Art in soft seat, high flow rate, pressure relieving
Flippen Float Valves
Flippen Float Valves Agricultural & Irrigation Commercial & Industrial Air Conditioning & Refrigeration watts.com This Watts Flippen Float Valve brochure features high quality, reliable control assemblies
Series Low Pressure Steam Boiler Safety Valves
14-200 Series Low Pressure Steam Boiler Safety Valves ASME Section IV Set pressures from 5 to 15. Sizes 2", 2-1/2" and 3". Section IV Heating Boilers Applications: The 14 Series is an ASME Section IV high
Keystone F89 pneumatic quarter-turn actuator General purpose / hazardous area
Compact, reliable and low operation costs for all types of quarter-turn valves are the keywords of the Keystone F89 range of pneumatic actuators Features Direct mounting to all Keystone butterfly valves
KEYSTONE F89 pneumatic quarter-turn actuator GENERAL PURPOSE / HAZARDOUS AREA
compact, reliable and low operation costs for all types of quarter-turn valves are the keywords of the Keystone F89 range of pneumatic actuators FEATURES Direct mounting to all Keystone butterfly valves
Type 459. Type 459. Available designs. Cap H2. with bushing 19. Lock nut. Bonnet. Outlet flange 2.4 Outlet adaptor 2.1. spacer.
Available designs 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring 12 Spindle 17 Spring plate 14 Split ring 60 Gasket 8 Guide 57 Pin 61 Ball 7 Disc 2 Outlet body
DARTMOUTH COLLEGE DESIGN January 3, 2012 & CONSTRUCTION GUIDELINES
SECTION 15100 VALVES PART 1 DESIGN DIRECTIVE 1.1 SUMMARY A. This Section includes general duty valves common to most mechanical piping systems, special duty valves are specified in individual piping system
Anderson Greenwood Series M9 Block and Bleed Gauge Valves
A valve with an interchangeable hard or soft seat and an integral bleed plug specifically designed to facilitate safe, compact, economical gauge installation and operation Features General application
15100 VALVES. E. Section Building Automation and Control System Guidelines
15100 VALVES PART 1: GENERAL 1.01 RELATED SECTIONS A. Section 15050 Basic Material and Methods B. Section 15545 Chilled Water System C. Section 15550 Heat Generation D. Section 15790 Coils E. Section 15955
Direct-Operated Pressure & Temperature Regulating Valves
Direct-Operated & Temperature Regulating Valves Direct-Operated are used for controlling pressure or temperature in a variety of applications. Regulating Valves Page No. Cast Iron 3/8 2 Page No. O Series
FKB INDÚSTRIA DE EQUIPAMENTOS LTDA. KNIFE GATE VALVE VGU-01 (Rev. 02/2016)
General Description The model FKB VGU-01 is developed in accordance with MSS-SP 81 Standard and its function is blocking the fluid sewage. They are light equipments for semi-lug body and flange installation,
CUSTOM COMBINATION AIR VALVE
INSTALLATION / OPERATION / MAINTENANCE CUSTOM COMBINATION AIR VALVE INTRODUCTION This manual will provide you with the information to properly install and maintain this valve to ensure a long service life.
TY-FLO 3 Piece Ball Valves
TY-FLO 3 Piece Ball Valves 3 PIECE BALL VALVES TY-FLO 3 Piece Ball Valves D 1 ASME B16.34 Compliant FeaTUreS 3-Piece, 8-Bolt construction provides superior high pressure performance and ASME B16.34 compliance
Kunkle Bailey 756 safety relief valve
The 756 safety valve combines a top piston guided valve and an unobstructed seat bore with a full lift capability, giving maximum discharge capacity Features Design incorporates an adjustable blowdown
Keystone Butterfly Valve Figure 9
A resilient seated butterfly valve for general purpose applications Features Bubble-tight shut-off at full pressure rating (PTFE lined configuration is drop tight). The seat and the disc are the only two