Customer Service : Tel Toll-free Fax
|
|
- August Booker
- 5 years ago
- Views:
Transcription
1
2 Table Of Contents Terms and Engineering Data...2 Lead-Free Brass Ball Valves TFP600-LF Full port, 2-piece body, lead-free, Threaded Ends...3 SFP600-LF Full port, 2-piece body, lead-free, Solder Ends...4 Bronze Butterfly Valves BFVA-TB3941 Bronze body, Threaded ends...5 BFVA-GB3941 Bronze body, Grooved ends...6 Ductile Iron Butterfly Valves BFVA-GD3851-TM2 Ductile Iron body, Grooved Ends...7 Butterfly Valve Performance Data...8 Ductile Iron Gate Valves GTVA-FD3151-HW Ductile Iron body, Resilient Seated OS&Y type, Flanged Ends...9 GTVB-FD3151-HW Ductile Iron body, Resilient Seated N.R.S type, Flanged Ends...10 Ductile Iron Check Valves CKVA-GD8351 Ductile Iron body, Grooved ends, Swing Check...11 CKVE-GD8351 Ductile Iron body, Grooved ends, Riser (Shotgun) Check...12 Check Valve Performance Data...13 Grooved Couplings &Fittings Std. Weight Rigid Coupling with Pre-lubricated C Gasket - GRCR...14 Std. Weight Flexible Coupling with Pre-lubricated C Gasket - GRCF...14 Reducing Coupling with Pre-lubricated Gasket - GRRC...14 Mechanical Tee, Threaded - GRMT...15 Mechanical Tee, Grooved - GRMG...15 Mechanical Tee, U-Bolted - GRMU...16 Hinge Adapter, Flange- GRFL...16 Flange Adapter, Threaded - GRFT...16 Flange Adapter, Grooved - GRFG...17 Adapter Elbow - GRAE...17 Reducing Adapter Nipple - GRRNP Elbow - GRE Elbow, Short Radius - GRES ¼ Elbow, Standard Radius- GRE ½ Elbow, Standard Radius- GRE...18 Cross - GRCS...19 Cap - GRCP...19 Drain Cap - GRDC...19 Tee, Short Radius - GRTS...19 Reducing Tee, Grooved - GRTG...20 Reducing Tee, Threaded - GRT T...20 Concentric Reducer, Threaded - GRRT...21 Concentric Reducer, Grooved - GRRG...21 Grooved Fittings Specification data...22
3 Terms & Engineering Data BLV: Ball Valve PSI: Pounds Per Square Inch BFV: Butterfl Valve RF. FLG.: Raised Face Flange BRZ.: Bronze SB: Screw-in Bonnet B.W.: Butt-weld SPEC: Specificatio C.I. Cast Iron (Gray Iron) SS.: Stainless Steel COP.: Copper STD: Standard CS.: Carbon Steel S.W. Socket-weld CWP: Cold Working Pressure SWP: Steam Working Pressure D.I.: Ductile Iron Temp: Temperature F: Degree Fahrenheit Thrd: Threaded FF. FLG.: Flat Face Flange UB: Union Bonnet NRS: Non-Rising Stem WOG: Water-Oil-Gas Service OD: Outside Diameter WWP: Water Working Pressure OS&Y: Outside Screw and York Pressure and Temperature Rating ANSI... ASME... API... ASTM... AWWA... CSA... FM... MSS... NACE... NFPA NSF UL... ULC... UPC... American National Standards Institute American Society of Mechanical Engineering American Petroleum Institute American Society for Testing Material American Water Works Association Canadian Standard Association Factory Mutual Fire Insurance Companies Manufacturers Standardization Society of the Valve and Fittings Industry The National Association of Corrosion Engineers National Fire Protection Association NSF/ANSI 61 Standard 61 for Portable Water Service Underwriters Laboratories Inc. Underwriters Laboratories of Canada IAPMO R&T Certificatio Temperature ( F) A105 (A216 WCB Carbon Steel) Working Pressure in PSIG by Class A182 - F316 (A351 CF8M & CF3M Stainless Steel) Temperature Working Pressure in PSIG by Class ( F) to Table from ANSI B to Table from ANSI B16.34 ASTM B62 & B61 Bronze Alloy Pressure Class by Material & End Style ASTM B62 ASTM B61 Temperature ( F) 125 2, Temperature 1 ( F) Cast Iron & Ductile Iron Pressure Class by Material & Valve Size Cast Iron Ductile Iron Class 125 Class 250 Class 150 Thread Thread Thread Thread -20 to Table from MSS SP Some Codes (i.e. ASME BPVC, Section 1) limit the rating temperature of indicated material to 406 F 2. Buna-N disc valves limited to 180 F temperature 3. PTFE disc valves limited to 450 F temperature 4. The Pressure & temperature ratings of Solder end valves vary with the solder & the size Note: Neither NCI or its affiliated entities assumes responsibility for the selection, use and maintenance of any product. Responsibility for the selection, use, and maintenance of any listed product remains with the purchaser and end-user to * The temperature shown for the corresponding rating shall be the material temperature of the pressure rating parts. It shall be assumed that the metal temperature will be the temperature of the contained fluid Use of a pressure rating at a metal temperature other than that of the contained flui shall be the responsibility of the user. 1. Buna-N disc vales limited to 180 F or PTFE disc valves limited to 450 F; * Maximum temperature for bronze trim or PTFE 2
4 Brass Ball Valve CRN TFP600 Series (NPT Ends) Forged Brass Ball Valve Two-Piece Body Full Port Threaded Ends APPLICATIONS Multi-purpose shut-off valve for use in engineered hot and cold water systems, gas applications, compressed air services, and fire protection. MATERIALS AND CONSTRUCTION - Forged brass body and patented "Raised V" end pieces for increased strength - Full port construction for high flow coefficient - Durable chrome-plated brass ball Stem threaded packing nut for easy adjustment Blow out Proof Stem Conforms to MSS SP 110 standards DESIGN CRITERIA cul Approval Trim and Drain (300 PSI) Compressed Gas Shut off Valves (600 PSI) Flammable Liquid Shut off Valves (600 PSI) Gas Shut off Valves (600 PSI) LP Gas Shut off Valves (600 PSI) Manual Valves (600 PSI) FM Approval PSI Rating NSF 61 Approval Obtained NSF61 Section 8 certificate through IAPMO Compliant to Prop65 standard CSA Approval (Threaded only) CAN/CGAC 3.16 (1/2 through 2 ) 125 psig AGA3-88 / CGA CR (1/4 through 2 ) 5 psig UL Listed Subject 258 for Trim and Drain (1/4 through 2 ) 150 WSP - Pilot Adjustable National Standard of Canada. Class Requirement Can Gas Lever Non Lubricated Shut-off Valve. Class Requirement CGA Manual Gas Valves on Piping Systems. Class Requirement CGA CR 9102 General Gas Valve US Standard. Class Requirement ANSI Z21.15 Gas Manual Valve House Piping System. Class Requirement IAS US Regulations Manual Gas Valve Metallic in Piping System US Standards. Class Requirements ANSI/ASME B /150F T-FP600: 2-PIECE, FULL PORT, FORGED BRASS BALL VALVE T FP600 Threaded End (IPS) 1/4" through 2" 600 CWP 2½" through 4" 400 CWP Size (IN) L D H W 1/4" /8" /2" /4" " /4" /2" " /2" " " PART BODY END CAP BALL SEAT STEM THRUST WASHER STEM PACKING GLAND HANDLE NUT MATERIALS LIST SPECIFICATION FORGED BRASS ASTM B124 C37700 FORGED BRASS ASTM B124 C37700 COPPER ALLOY, CHROME PLATED PTFE COPPER ALLOY PTFE PTFE COPPER ALLOY CARBON STEEL PLATED CARBON STEEL PLATED ** OPTIONAL LOCKING LEVER HANDLE, STEM EXTENSION & MEMORY STOP** Above port dimensions meet or exceed full MSS SP-110 standards. 3
5 Lead-Free Brass Ball Valve CRN TFP600-LF Series (NPT Ends, Lead-Free) Forged Brass Ball Valve Two-Piece Body Full Port Threaded Ends Lead-Free APPLICATIONS Multi-purpose shut-off valve for use in hot and cold portable water systems. MATERIALS AND CONSTRUCTION - Forged brass body and patented "Raised V" end pieces for increased strength - Full port construction for high flow coefficient - Durable chrome-plated lead-free brass ball Stem threaded packing nut for easy adjustment Blow out Proof Stem Conforms to MSS SP 110 standards DESIGN CRITERIA cul Approval Trim and Drain (300 PSI) Compressed Gas Shut off Valves (300 PSI) Flammable Liquid Shut off Valves (300 PSI) Gas Shut off Valves (300 PSI) LP Gas Shut off Valves (300 PSI) Manual Valves (300 PSI) FM Approval PSI Rating NSF/ANSI 61 (ANNEX G), NSF/ANSI 372 Approval - Obtained NSF61 Section 8 certificate through IAPMO - Compliant to Prop65 standard CSA Approval (Threaded only) - Pilot Adjustable National Standard of Canada. Class Requirement Can Gas Lever Non Lubricated Shut-off Valve. Class Requirement CGA Manual Gas Valves on Piping Systems. Class Requirement CGA CR 9102 General Gas Valve US Standard. Class Requirement ANSI Z21.15 Gas Manual Valve House Piping System. Class Requirement IAS US Regulations Manual Gas Valve Metallic in Piping System US Standards. Class Requirements ANSI/ASME B /150F Size (IN) L D H W 1/4" /8" /2" /4" " /4" /2" " T-FP600-LF: 2-PIECE, FULL PORT, LEAD-FREE FORGED BRASS BALL VALVE T FP600-LF Threaded End (IPS) 1/4" through 2" 600 CWP BODY END CAP BALL SEAT STEM PART 6 THRUST WASHER 7 STEM PACKING 8 GLAND 9 HANDLE 10 NUT MATERIALS LIST SPECIFICATION LEAD-FREE BRASS LEAD-FREE BRASS LEAD-FREE BRASS, CHROME PLATED PTFE COPPER ALLOY PTFE PTFE COPPER ALLOY CARBON STEEL PLATED CARBON STEEL PLATED Above port dimensions meet or exceed full MSS SP-110 standards. 4
6 Bronze Butterfly Valve PSI CWP BFVA-TB3941 Bronze Butterfly Valve (Threaded Ends) 300 PSI Non-shock Cold Working Pressure Viton Seat, Stainless Steel Disc Mounting Pad ISO 5211/ EN12116 Full Port Patented FM & UL/ULC Listed MATERIALS LIST NO. PART NAME MATERIAL QTY 1 BODY BRONZE C DISC SS HANDWHEEL ASTM A216 WCB 1 4 SEAT ASTM D200 VITON 1 5 INDICATOR POWDER METAL 1 6 HOUSING FORGED BRASS 1 7 COVER FORGED BRASS 1 Dimensions (mm) EN12116 Size H ± 3 A ± 1 L M ISO '' F04/F05 1-1/4'' F04/F05 1-1/2'' F04/F05 2'' F04/F05 2-1/2'' F04/F05 For the 1'' sizing: UL listed and FM approved only 5
7 Bronze Butterfly Valve PSI CWP BFVA-GB3941 Bronze Butterfly Valve (Grooved Ends) 300 PSI Non-shock Cold Working Pressure Viton Seat, Stainless Steel Disc Mounting Pad ISO 5211/ EN12116 Cut Groove Dimension to AWWA C Full Port Patented FM & UL/ULC Listed MATERIALS LIST NO. PART NAME MATERIAL QTY 1 BODY BRONZE C DISC SS HANDWHEEL ASTM A216 WCB 1 4 SEAT ASTM D200 VITON 1 5 INDICATOR POWDER METAL 1 6 HOUSING FORGED BRASS 1 7 COVER FORGED BRASS 1 Dimensions (mm) Size H ± 3 A ± 1 L M P ± 0.76 O ± 0.76 EN12116 ISO /4'' ± F04/F05 1-1/2'' ± F04/F05 2'' ± F04/F05 2-1/2'' ± F04/F05 6
8 Ductile Iron Butterfly Valve PSI CWP BFVA-GD3851-TM2 Grooved-End Butterfly Valve 300 PSI Non-shock Cold Working Pressure Approved Gear Operator for both Indoor or Outdoor use NSF Certified Polyamide Coated Ductile Iron body for Excellent Protection EPDM encapsulated Disc with Outstanding Flow Characteristics Low Torque Operation Options of Double Internal Supervisory Switches FM & UL/ULC Listed Dimensions 7
9 Ductile Iron Butterfly Valve PSI CWP Butterfly Valve Performance Data Formulas for C V Values Where: Q Flow rate (gallons per minute: GPM ΔP = Pressure drop across valve (PSI) C V = Flow coefficient Nominal Pipe Cv Nominal Pipe Cv Nominal Pipe Cv Size O.D. (Full Size O.D. (Full Size O.D. (Full In. mm Mm Open) In. mm mm Open) In. mm mm Open) 2 1/ PRESSURE DROP P.S.I. FLOW RATE G.P.M. 8
10 Ductile Iron Gate Valve PSI CWP GTVA-FD3151-HW Resilient Seated OS&Y Type-Flanged Ends Working Pressure 300 PSI Non-shock Cold Working Pressure Flanged Ends ANSI B16.1 Class 125 Valve Standard Conforms to AWWA C515 FM & UL/ULC Listed Dimensions 9
11 Ductile Iron Gate Valve PSI CWP GTVB-FD3151-SN Resilient Seated NRS Type-Flanged Ends Working Pressure 300 PSI Non-shock Cold Working Pressure Flanged Ends ANSI B16.1 Class 125 Valve Standard Conforms to AWWA C515 FM & UL/ULC Listed *Smaller size* 2''- 4'' *Larger size shown* 5'' - 12'' Dimensions 10
12 Ductile Iron Check Valve PSI CWP CKVA-GD8351 Grooved-End Swing Check Valve 350 PSI Non-Shock Cold Working Pressure Installed in both Horizontal or Vertical Line with Upward Flow Easier and Faster to Maintain and Install Low Pressure Drop EPDM non-stick leak tight sealing All Stainless Steel Wetted Parts to Provide Superior Corrosion Resistance FM Approved & UL/ULC Listed Dimensions 11
13 Ductile Iron Check Valve PSI CWP CKVE-GD8351 Grooved-End Riser (Shotgun) Check Valve 350 PSI Non-Shock Cold Working Pressure Installed in both Horizontal or Vertical Line with Upward Flow Easier and Faster to Maintain and Install Low Pressure Drop EPDM non-stick leak tight sealing All Stainless Steel Wetted Parts to Provide Superior Corrosion Resistance FM Approved & UL/ULC Listed Dimensions 12
14 Ductile Iron Check Valve PSI CWP Check Valve Performance Data Formulas for CV Values Where: Q Flow rate (gallons per minute: GPM ΔP = Pressure drop across valve (PSI) C V = Flow coefficient Nominal Pipe Cv Nominal Pipe Cv Nominal Pipe Cv Size O.D. (Full Size O.D. (Full Size O.D. (Full In. mm mm Open) In. mm mm Open) In. mm mm Open) /
15 Grooved Couplings & Fittings Std. Weight Rigid Coupling with Pre-lubricated C Gasket - GRCR Std. Weight Flexible Coupling with Pre-lubricated C Gasket - GRCF Reducing Coupling with Pre-lubricated Gasket - GRRC 14
16 Grooved Couplings & Fittings Mechanical Tee, Threaded - GRMT Mechanical Tee, Grooved - GRMG 15
17 Grooved Couplings & Fittings Mechanical Tee, U-Bolted - GRMU Hinge Adapter, Flange- GRFL Flange Adapter, Threaded - GRFT 16
18 Grooved Couplings & Fittings Flange Adapter, Grooved - GRFG Adapter Elbow - GRAE Reducing Adapter Nipple - GRRNP 17
19 Grooved Couplings & Fittings 45 Elbow - GRE4 90 Elbow, Short Radius - GRES 11¼ Elbow,Standard Radius- GRE 22½ Elbow,Standard Radius- GRE 18
20 Grooved Couplings & Fittings Cross - GRCS Cap - GRCP Drain Cap - GRDC Tee, Short Radius - GRTS 19
21 Grooved Couplings & Fittings Reducing Tee, Grooved - GRTG Reducing Tee, Threaded - GRTT 20
22 Grooved Couplings & Fittings 21
23 Grooved Couplings & Fittings Specifications: All listed fittings and couplings are UL/ULC listed and FM approved for both wet and dry automatic sprinkler systems. ISO 9001 Manufacturing facility. Ductile iron housings conform to ASTM A-536. Pre-lubricated Grade E gasket (EPDM) are standard for all gasketed fittings and couplings. Gasket option: Electroplated, oval neck track head bolts conforms to ASTM-A183 with minimum tensile strength of 110,000psi. Orange paint coatings are in regular stock; Dacromet, Galvanized and Epoxy coatings available upon special request. Product weights are approximate and subject to change. NCI keeps the right to update the product design and specification without notice. Please visit for the most up to date product information. *** Specifications shown are subject to change without notice. *** 22
24 QUALITY PRODUCTS BY NCI CANADA INDUSTRIAL VALVES Brass and Bronze Ball Valves High Performance Carbon/Stainless Steel Ball Valves Bronze & Iron Gate, Globe and Check Valves Cast & Forged Steel Gate, Globe and Check Valves Butterfly Valves Fire Protection Valves Bronze, Iron and Steel Strainers GROOVED FITTINGS Flexible & Rigid Couplings Reducing Couplings Hinged Flange Adapters Standard Radius Fittings & Flange Adapters Short Radius 90s & Tees Standard Radius 90s & Tees Mechanical Tees U-Bolt Strap Tees Concentric Reducers FIRE PROTECTION VALVES ACR Copper Fittings Copper Press System Fittings & Valves Threaded Bronze Fittings Brass Nipples H.P. Sch 40/80/XXH Seamless Steel Nipples H.P. Sch 40 Welded Steel Nipples PLASTIC FITTINGS ABS-DWV Fittings CPVC-CTS FGG PVF PVC Sch40 White Fittings & Valves METAL FITTINGS ACR Copper Fittings Copper Press System Fittings & Valves Threaded Bronze Fittings Brass Nipples H.P. Sch 40/80/XXH Seamless Steel Nipples H.P. Sch 40 Welded Steel Nipples THERMOPLASTIC (CHEMTROL PVF) PVC Sch80 Valves & Fittings CPVC Sch80 Pipe, Valves & Fittings PP Sch80 (Black & Natural) PVF PVDF Sch80 (Red & Natural) PVF PLUMBING VALVES Gas Ball Valves Boiler Drain Valves Stop and Waste Valves INSULATION Pipe Insulation (Ontario, Québec, Atlantic) Headquarter and East Region Warehouse: 2305 Wyecroft Rd. Oakville, Ontario, L6L 6R2 West Region Warehouse: Ave NW, Edmonton, Alberta, T6B 3L2 Tel: / Fax:
HVAC Products 2016 EDITION NCI CANADA INC.
HVAC Products 2016 EDITION NCI CANADA INC. YOUR SINGLE SOURCE SOLUTION NCI Canada Inc. is a Canadian National master distributor of high quality valves, fittings, pipes and related products serving residential,
More informationApproved Branded Traceable Fire Protection & Waterworks Valves
Approved Branded Traceable Fire Protection & Waterworks Valves (800) 766-0076 www.smithcooper.com Los Angeles, CA Atlanta, GA Vancouver, WA Chicago, IL AWWA C515 Compliant CONSIDER Your Options Tamper
More informationFORTUNE BRASS, CARBON, STAINLESS STEEL BALL VALVES
FORTUNE BRASS, CARBON, STAINLESS STEEL BALL VALVES FORGED BRASS BALL VALVES 2-pc Full Port Forged Brass Ball Valve, Packing Gland Design, 600 WOG/150 WSP, MSS-SP-110 CSA, UL, FM, NSF61 and LP Gass Approved
More informationGD N (not shown) No Switches. GD N Grooved 2¹ ₂", 3", 4", 6", 8", 10"
300 PSI WWP UL/FM Butterfly Valves Designed for normally open position monitoring Elastomer Encapsulated Disc Accepts Internal Supervisory Switches Compatible with IPS Pipe 300 PSI/20.7 Bar Non-Shock Cold
More informationSECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
PART 1 - GENERAL 1.1 DESCRIPTION OF WORK A. Provide labor, materials, equipment, and services necessary to install valves required to complete the work indicated on drawings. B. ASME Compliance: 1. ASME
More informationA. American National Standards Institute: 1. ANSI Z Relief Valves for Hot Water Supply Systems.
SECTION 220523 - PLUMBING VALVES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Ball valves. 2. Butterfly valves. 3. Swing check valves. 4. Spring loaded check valves. 5. Water pressure reducing
More informationSECTION MISCELLANEOUS VALVES
SECTION 05140 - PART 1 - GENERAL 1.1 WORK OF THIS SECTION A. The WORK of this Section includes providing miscellaneous valves as indicated, complete and operable, including accessories and operators. 1.2
More informationThe applicable material specifications for ductile iron and rubber gaskets apply:
72 COUPLINGS - Grinnell Copper Grooved System is designed for joining copper tube size components 2" to 8" (54,0mm to 206,4mm) type K, L, M and DWV. All couplings and fittings are rated for working pressures
More informationStandard-Low Emission Valves to 100 PPM. A-Series Brass Appliance Valves CSA Approved; 1 & 2 piece Body Designs; Threaded & Flare End connections
Standard-Low Emission Valves to 100 PPM Cast Steel Valves 150 2500 ASME; Gate, Globe & Check Valves; WCB & High Temperature Chrome Valves; Low Temperature Valves; Flanged, Butt-weld, RTG, End Connections;
More informationSee our expanding selection of products on Product Portfolio
See our expanding selection of products on www.fnw.com Product Portfolio Table of Contents Low Lead Products- Page 3 Ball Valves, Check Valves, Strainers, Water Hammer Arrestors Ball Valves, Brass - Page
More informationSECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
SECTION 220523 - GENERAL-DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationIndustrial Bronze and Iron Price List
Industrial Bronze and Iron Price List TABLE OF CONTENTS IND-0217 Effective: February 1, 2017 Revised: 12/07/17 Suggested list prices are subject to change without notification. Visit our Website for the
More informationIndustrial Bronze and Iron Price List
Industrial Bronze and Iron Price List TABLE OF CONTENTS IND-0718 Effective: July 2, 2018 Revised: 08/06/2018 Suggested list prices are subject to change without notification. Visit our Website for the
More informationIndustrial Bronze and Iron Price List
Industrial Bronze and Iron Price List IND-0318 Effective: March 1, 2018 Revised: 08/06/2018 Suggested list prices are subject to change without notification. Visit our Website for the most up-to-date product
More informationIndustrial Bronze and Iron Price List
Industrial Bronze and Iron Price List IND-0718 Effective: July 2, 2018 Revised: 09/24/2018 Suggested list prices are subject to change without notification. Visit our Website for the most up-to-date product
More information1.1 PURPOSE A. This section is intended to define the general installation and minimum product requirements for hydronic and steam valves.
Date Description of Change Pages / Sections Modified ID 6/15/16 Entire document - mgl44 PART 1 - INTRODUCTION 1.1 PURPOSE A. This section is intended to define the general installation and minimum product
More informationValve Selection. 1. Function and service considerations
1. Function and service considerations Valve Selection Selection Valves serve the purpose of controlling the fluids in building services piping. Valves are produced in a variety of design types and materials.
More informationSECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
SUNY GENESEO 220523-1 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
More informationSee our expanding selection of products on Product Portfolio
See our expanding selection of products on www.fnw.com Product Portfolio Table of Contents Low Lead Products- Page 3 Ball Valves, Check Valves, Strainers, Water Hammer Arrestors Ball Valves, Brass - Page
More informationUNIVERSITY SERVICES ANNEX James Madison University Harrisonburg, Virginia State Project Code: Architect s Project Number:
SECTION 230523 GENERAL DUTY VALVES FOR HVAC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Provisions of the Contract and of the Contract Documents apply to this Section. 1.2 DEFINITIONS A. The following
More informationSECTION GENERAL-DUTY VALVES FOR HVAC. A. Section includes valves for building services piping.
SECTION 23 05 23 GENERAL-DUTY VALVES FOR HVAC PART 1 - GENERAL 1.1 SUMMARY A. Section includes valves for building services piping. 1.2 REFERENCES A. AGA Z21.22 (American Gas Association) - Relief Valves
More informationKENNEDY VALVE KS-RW RESILIENT WEDGE VALVES
KENNEDY VALVE KS-RW RESILIENT WEDGE VALVES KENNEDY VALVE AWWA C515 Resilient Wedge Gate Valves Meet or Exceed the Requirements of AWWA Standard C515 UL-262/FM-1120/1130 ULC-Underwriters of Canada 2 1/2
More informationLATEST ARRIVALS CATALOGUE STOCK
LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL
More informationKVC VALVES AND PEX FITTINGS
KVC VALVES AND PEX FITTINGS 2011 KVC VALVES & PEX FITTINGS CATALOGUE 2 P a g e Table of contents 1. Cast Steel Valves..4 FIG. 272-CS-15 ( Gate ).....5 FIG. 272-CS-300 ( Gate )......6 FIG. 272-CS-600 (
More informationValves. Fittings. Actuators
Valves Fittings Actuators Low Emission Valves to 50 PPM Cast Steel Valves 150 2500 ASME; CE Registered Gate, Globe & Check Valves; WCB & High Temperature Chrome Valves; Low Temperature Valves; Flanged,
More informationTrunnion Ball Valve Catalogue
Trunnion Ball Valve Catalogue Introduction "Fusion" is the registered trademark of Archmetal Industries, a member of the Fortune Group. * The Fortune Group is a world class producer of a full range of
More informationSECTION COMMON WORK RESULTS FOR FIRE SUPPRESSION. A. Pipe, fittings, valves, and connections for sprinkler systems.
SECTION 210500 - COMMON WORK RESULTS FOR FIRE SUPPRESSION PART 1 GENERAL 1.1 SECTION INCLUDES A. Pipe, fittings, valves, and connections for sprinkler systems. 1.2 RELATED REQUIREMENTS A. Section 099000
More informationSize: 1/4 to 3. Material: 316 Stainless Steel, Carbon Steel,
Size: 1/4 to 4 Material: 316 Stainless Steel, Carbon Steel, Alloy 20, Hastelloy C, Monel, Brass, SW, BW, BSPT, 150#, 300#, 600#, Flanged Pressure: Vacuum to 3000 PSI* -50 to 600 F* ASME B16.34 Design Bottom
More informationcatalog C-NPS-1014 NIBCO Press System
catalog C-NPS-1014 ahead of the flow NIBCO Press System Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products and
More informationIndustrial Bronze and Iron Price List
Industrial Bronze and Iron Price List TABLE OF CONTENTS IBI-1017 Effective: October 2, 2017 Revised: 12/07/2017 Suggested list prices are subject to change without notification. Visit our Website for the
More informationDirect Mount Packages
800.783.7836 Direct Mount Packages BEV9 Actuated package Size range: 1/ - Pressure rated for 1000 WOG 316 Stainless steel construction Live loaded stem seal design Full Port Threaded Ends (F) EZ99 Actuated
More informationAsk us about our 3 Year MAS Valve Limited Warranty
Fittings Actuators A-Series Brass Appliance Valves CSA Approved; 1 & 2 piece Body Designs; Threaded & Flare End connections B-Series Brass Ball Valves Full and Reduced Port Designs; ASTM 37700, Qualified
More informationDARTMOUTH COLLEGE DESIGN January 3, 2012 & CONSTRUCTION GUIDELINES
SECTION 15100 VALVES PART 1 DESIGN DIRECTIVE 1.1 SUMMARY A. This Section includes general duty valves common to most mechanical piping systems, special duty valves are specified in individual piping system
More information1.2 REFERENCES.1 American National Standards Institute (ANSI)/ American Society of Mechanical Engineers (ASME)
Issued 2005/06/01 Section 15111 Valves Bronze Page 1 of 6 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01355 Waste Management and Disposal 1.2 REFERENCES.1 American National Standards Institute (ANSI)/
More informationIron Check Valves Illustrated Index
Iron Check Valves Illustrated Index Iron Body Swing Check Valve Bronze Mounted or All Iron 125 lb. SWP 200 lb. CWP Iron Body Swing Check Valve Bronze Mounted 250 lb. SWP 500 lb. CWP Iron Body Silent Check
More informationBrown University Revised August 3, 2012 Facilities Design & Construction Standards SECTION HVAC&R VALVES
SECTION 23 05 23 HVAC&R VALVES PART 1 - GENERAL 1.1 SUMMARY: A. Section includes valves for building services piping. 1.2 GENERAL VALVE APPLICATION REQUIREMENTS: A. Provide valve handle extensions that
More informationUnion County Vocational - Technical Schools Scotch Plains, New Jersey
SECTION 220523 - GENERAL-DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Brass ball valves. 2. Iron swing check valves. 3. Iron gate valves. 4. Iron globe valves. B.
More informationValves & Flow Control Components Valves & Flow Control Components
Section 4 Valves & Flow ontrol omponents Valves & Flow ontrol omponents... 106 SJ-200 Low-Profile utterfly Valve... 107 SJ-300N utterfly Valve... 108 SJ-300F utterfly Valve (for Fire Protection)... 110
More informationCondensed Valve Guide Gate Globe Check Ball Strainer. Warren Valve - Quality Since 1963
800.231.6969 Condensed Valve Guide Gate Globe Check Ball Strainer Warren Valve - Quality Since 1963 Gate, Globe & Check Valves #1156 #2156 #3156 Gate Globe Check Pressures Class Figure 150 - #1156 300
More informationCommercial Ball Valves
Price Schedule C-01-18 January 1, 2018 Supersedes C-06-15 Commercial Ball Valves BRASS & BRONZE BALL VALVES TWO-PIECE BODY $ 10.95 0.27 20 120 10.95 0.29 20 120 012 10.10 0.38 12 96 034 13.90 0.58 10 60
More informationSUBMITTAL PACKAGE FIRE PROTECTION VALVES
SUBMITTAL PACKAGE FIRE PROTECTION VALVES Butterfly Valves Ductile Iron Grooved...pg 2-5 Grooved Check Valves...pg 6-8 OS&Y Valves...pg 9-12 ARGCO.com 800-854-1015 Updated 2/27/2017 ARGCO GROOVED BUTTERFLY
More informationSECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
SECTION 22 05 23 PART 1 - GENERAL 1.1 SUMMARY A. Work Included: 1. Valves, General 2. Gate Valves 3. Balancing Valves 4. Ball Valves 5. Swing Check Valves 6. Backflow Prevention Assemblies 7. Pressure
More informationCITY OF TAMPA ADDENDUM 2. July 13, Contract 17-C-00030; David L. Tippin Water Treatment Facility Lime Slaker Replacement
CITY OF TAMPA Bob Buckhorn, Mayor CONTRACT ADMINISTRATION DEPARTMENT Michael W. Chucran, Director ADDENDUM 2 July 13, 2017 Contract 17-C-00030; David L. Tippin Water Treatment Facility Lime Slaker Replacement
More information3-Piece High Pressure Ball Valves
3-Piece High Pressure Ball Valves Contromatics 3-Piece High Pressure Ball Valves Series 735/ 835 3/4"- 21/2" Reduced Port, 45 WOG* 735-Carbon Steel Body, Stainless Steel Trim 835-All Stainless Steel Construction
More informationFittings. Valves. Actuators
Fittings Valves Actuators Low Emission Valves to 50 PPM Cast Steel Valves 150 2500 ASME; Globe & Check Valves; WCB & High Temperature Chrome Valves; Low Temperature Valves; Flanged, Butt-weld, RTG, End
More informationSECTION VALVES
PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions Specification Sections, apply to this Section. B. Related Sections:
More informationMichigan State University Construction Standards. GENERAL-DUTY VALVES FOR PLUMBING PIPING Page
Page 220523-1 SECTION 220523 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationVES VAL NEW NEW NEW NEW NEW NEW NEW NEW NEW NEW NEW
...170-214 LEAD FREE...171-174 LEAD FREE BALL...171-173 BRASS...175-197 LF Gate and Check valves... 174 Full Port Ball... 175 Locking Handle... 176 Butterfly Handle... 177 MIP x FIP... 188-189 N/P Ball
More informationContents. G Series stainless steel ball valves. F Series flanged ball valves. C Series carbon steel ball valves. B Series brass/bronze ball valves
Product Guide Contents H Series steel ball valves Product order code information 1.1 HM-3ART/LRT: reduced port, 3 piece, NPT, API 67 1.2 HM-3AFT/LFT: full port, 3 piece, NPT, API 67 1.3 HM-3AFSW/3LFSW:
More informationBall Valves. Full Port Ball Valves - Compression w/ Drain Cap - Forged Brass. Full Port Mini Ball Valve - Forged Brass 05/06/15
05/06/15 G8 Full Port - Compression w/ Drain Cap - Forged Brass Rated for cold water, oil & gas Blow-out proof stem Temperature Range: -30 to 150C (-22 to 302F) Working Pressure: 600 psi Blue handle Lead-Free
More informationCondensed Valve Guide Gate Globe Check Ball Strainer. Warren Valve - Quality Since 1963
800.231.6969 Condensed Valve Guide Gate Globe Check Ball Strainer Warren Valve - Quality Since 1963 Gate, Globe & Check Valves #1156 #2156 #3156 Gate Globe Check Sizes ½"-36" Pressures Class Figure 150
More informationGrooved Piping System for Fire Protection Services
Grooved Piping System for Fire Protection Services 1.01 General: A. Section Includes: 1. General 2. Materials: a. Pipe b. Victaulic Couplings c. Victaulic Fittings d. Hole and Branch Outlets e. Victaulic
More informationBRASS BALL VALVES. CSA, UL, cul CGA 9.1 and FM Approved. Female NPT, Male NPT and Flare ends in various configurations from 3/8 to 1.0.
195 Series Ball Valves BRASS BALL VALVES CSA, UL, cul CGA 9.1 and FM Approved. Female NPT, Male NPT and Flare ends in various configurations from 3/8 to 1.0. Hot forged brass body Blow-out nickel plated
More information88A-100 Series. Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 STANDARDS COMPLIANCE STANDARD FEATURES
Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108 Type 1215 Chrome Plated 9. Gland Plate 302 or 304 SS 10. Stem Nut 316 SS 11.
More informationQUALITY YOU CAN BUILD ON CONDENSED CATALOG
QUALITY YOU CAN BUILD ON CONDENSED CATALOG Pressed for time? JUST PRESS, CRIMP AND TRIPLE YOUR PRODUCTIVITY 1. Reduce installation time up to 68% with Hammonds s extensive new line of UltraPress press-connection
More informationCertified and in full compliance to: CSA / ANSI Z CSA 6.5A 2000 / ANSI Z21.21A 2000 CSA 3.9 M94 / CGA 3.9 (C/I) CSA 3.
Certified and Approved To -40 C/ F Liquid & Gas Safety Shutoff Valves FM-7412 Certified and in full compliance to: CSA 6.5 2000 / ANSI Z21.21 2000 CSA 6.5A 2000 / ANSI Z21.21A 2000 CSA 3.9 M94 / CGA 3.9
More informationSECTION GENERAL-DUTY VALVES FOR HVAC PIPING. A. Contents of Division 23, HVAC and Division 01, General Requirements apply to this Section.
SECTION 23 05 23 PART 1 - GENERAL 1.1 SUMMARY A. Work Included: 1. Gate Valves 2. Balancing Valves 3. Ball Valves 4. Butterfly Valves 5. Swing Check Valves 1.2 RELATED SECTIONS A. Contents of Division
More informationA. This Section includes general duty valves common to several HVAC piping systems.
SECTION 23 05 23 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
More informationCertifications & Approvals
Industrial Certifications & Approvals Matco-Norca is committed to maintaining a high standard of quality for all the products we offer. Most products in this catalog are labeled with a designated approval
More informationSpecified Valve Index
Specified Valve Index C-SVI-0418 Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products and services be continuously
More informationHenderson Engineers, Inc. SECTION GENERAL DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL REQUIREMENTS
SECTION 220523 - GENERAL DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL REQUIREMENTS 1.1 SUMMARY A. This Section includes general duty valves common to most plumbing piping systems. 1. Special purpose
More informationMichigan State University Construction Standards. GENERAL-DUTY VALVES FOR HVAC PIPING Page
Page 230523-1 Copyright 2005 by The American Institute of Architects (AIA) Exclusively published and distributed by Architectural Computer Services, Inc. (ARCOM) for the AIA Modified by MSU Physical Plant
More informationCast-Iron Valves G101 DI BUTTERFLY VALVE LEVER... 2 G401 CI GLOBE VALVE CL G403 CI GLOBE VALVE PN G103 DI BUTTERFLY VALVE GEAR...
Cast-Iron Valves PAGE G101 DI BUTTERFLY VALVE LEVER.... 2 PAGE G401 CI GLOBE VALVE CL125.... 9 G103 DI BUTTERFLY VALVE GEAR.... 3 G403 CI GLOBE VALVE PN16.... 10 G201 CI Y STRAINER CL125.... 4 G501 CI
More informationCarbon Steel ANSI Class 150 Flanged Full Port Ball Valve -
Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108 Type 1215 8. Stem Nut 300 Series Stainless Steel 9. Lever 300 Series Stainless Steel w/vinyl Grip 10. Stem Bearing
More informationLead-free valves for potable water systems. Rev 02/17
Lead-free valves for potable water systems. Rev 02/17 UltraPure for purer water. The new standard. Senate law S.3874 was passed January 4, 2011 and is effective January 4, 2014. The law regulates lead
More informationCATALOG C-NPS-0812 AHEAD OF THE FLOW. NIBCO Press System
CATALOG C-NPS-0812 AHEAD OF THE FLOW NIBCO Press System Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products and
More informationSTANDARDS and SPECIFICATIONS
ANSI (American National Standards Institute) ANSI B31.4 - Liquid petroleum transportation piping system. ANSI B31.4 - Gas transmission and distribution piping system. API (American Petroleum Institute)
More informationSTAINLESS STEEL SYSTEMS
STAINLESS STEEL SYSTEMS 139 Systems Table of Contents Figure 472 Rigid Couplings Page 142 Figure 401 45 Elbows Page 149 Figure SS-7X Rigid Couplings (Large Diameter) Page 143 Figure 405 Flexible Couplings
More informationSeries 800 AWWA Butterfly Valves
Series 800 AWWA Butterfly Valves Valve and Gate Group A Century of Experience GA valves are known for long term reliability in the most demanding water and wastewater applications. Whether a simple check
More informationCNC DISTRIBUTION. ITEM NO Description Quantity
Valves CNC DISTRIBUTION Brass Ball Valves ITEM NO IPS Ball Valve *600# PSI WOG 150 PSI WSP * Heavy Pattern Forged Brass Construction *Full Port For Maximum Flow *Teflon Seats * Teflon Stem Packing * AGA,
More informationMILLCENTRIC FULL/100% POR T ECCENTRIC PLUG VALVE
ISO 9001 CERTIFIED MILLCENTRIC FULL/100% POR T ECCENTRIC PLUG VALVE Suggested Specifications The Milliken criteria of quality, reliability, safety and value are embodied in the Millcentric Eccentric valve,
More informationHerpteraium SECTION VALVES GENERAL
SECTION 22 05 23 VALVES GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to
More informationBall Valves. Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ Stainless Steel Technical Data 2160 PSI ¼
Ball Valves Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ - 4...3 316 Stainless Steel Technical Data 2160 PSI ¼ - 4...3 Style BVSC...4 Carbon Steel Technical Data 2200 PSI ¼ - 2...5
More informationLOWER MACUNGIE TOWNSHIP COMMUNITY CENTER ADDITIONS AND RENOVATIONS
LOWER MACUNGIE TOWNSHIP COMMUNITY CENTER. SECTION.0 - GENERAL-DUTY VALVES FOR PLUMBING PIPING PART - GENERAL. RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and
More informationSECTION (15110) - GENERAL DUTY VALVES FOR PLUMBING PIPING
SECTION 22 05 23 (15110) - GENERAL DUTY VALVES FOR PLUMBING PIPING PART 1 GENERAL 1.01 SUMMARY A. Section Includes: 1. Valves. B. Related Sections: 1.02 REFERENCES 1. Section 22 05 53 (15075) Identification
More informationProduct Profile. Product Profile CALIFORNIA TEXAS ILLINOIS GEORGIA NEW YORK. Global sourcing. National compliance. Local service.
Product Profile CALIFORNIA TEXAS ILLINOIS GEORGIA NEW YORK Global sourcing. National compliance. Local service. 1 Introduction Matco-Norca is the leading supplier of globally sourced, code-compliant Plumbing
More informationSpecified Valve Index
Specified Valve Index Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products and services be continuously developed
More information505F. Multi-Port Ball Valve. Full Port ISO 5211 Mounting Pad. For Automated & Manual Service. General Chemical. Industrial
505F Multi-Port Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial and Other Corrosion Resistant Applications The 505F Series 3//5-Way Ball Valve The 505F
More informationTABLE OF CONTENTS. 2
TABLE OF CONTENTS HIGH PERFORMANCE BALL VALVES...PAGE 3 FIRE SAFE BALL VALVES...PAGE 6 SEAL WELD BALL VALVES...PAGE 9 MULTI PURPOSE BALL VALVES...PAGE 12 BUTTERFLY BALL VALVES...PAGE 17 MULTI-TURN VALVES...PAGE
More informationGRINNELL Model B302 and Model BN302 Grooved End Butterfly Valves with Gear Operators or Lever-Lock Operators General Description
Worldwide Contacts www.grinnell.com GRINNELL Model B0 and Model BN0 Grooved End Butterfly Valves with Gear Operators or Lever-Lock Operators General Description The GRINNELL Model B0 and Model BN0 Butterfly
More informationSuggested Specifications
ISO 9001 Certified Suggested Specifications The Milliken criteria of quality, reliability, safety and value are embodied in the Millcentric Eccentric valve, setting higher standards for dependable performance
More informationLETTER OF TRANSMITTAL
Nordstrom Contracting Consulting Corp 36 Theills Mt Ivy Rd Pomona, NY 10970 To: Mark Cooperman General Engineer Montrose Campus 2094 Albany Post Rd Montrose, NY 10548 914-737-4400 ex 2615 LETTER OF TRANSMITTAL
More information15100 VALVES. E. Section Building Automation and Control System Guidelines
15100 VALVES PART 1: GENERAL 1.01 RELATED SECTIONS A. Section 15050 Basic Material and Methods B. Section 15545 Chilled Water System C. Section 15550 Heat Generation D. Section 15790 Coils E. Section 15955
More information5015AB ECO-VALVE. Low Lead Brass Pex End Ball Valve
ECO-VALVE 5015AB Low Lead Brass Pex End Ball Valve 400# WOG Regular Port Virgin PTFE Seats For use with PEX Tubing Barb x Barb Blow-Out Proof Stem Double NBR O-ring Packing ASTM F1960 NSF 61 & NSF 372
More informationGrooved Piping System for Fire Protection Services
Grooved Piping System for Fire Protection Services 1.01 General: A. Section Includes: 1. General 2. Materials: a. Pipe b. Victaulic Couplings c. Victaulic Fittings d. Hole and Branch Outlets e. Victaulic
More informationSECTION VALVES PART 1 -GENERAL
SECTION 1571 0 VALVES PART 3- EXECUTION General Shut-off Valves Balancing Valves Drain Valves RELATED WORK Section 15430- Plumbing Specialties Section 15450- Plumbing Equipment PART 1 -GENERAL SCOPE This
More informationLead-free valves for potable water systems.
Lead-free valves for potable water systems. UltraPure for purer water. The new standard. On January 1, 2010, new laws went into effect that regulate lead content in plumbing products used for potable
More informationVictaulic Standard Grooved and Advanced Grooved (AGS) Piping System for IPS Steel 2 (DN 50) through 60 (DN1500)
Victaulic Standard Grooved and Advanced Grooved (AGS) Piping System for IPS Steel 2 (DN 50) through 60 (DN1500) 1.01 General: A. Section Includes: 1. General 2. Materials: a. Pipe b. Victaulic Couplings
More information516509_tabs 11/16/10 4:55 AM Page 1 FIRE HYDRANTS
Date Printed: November 2010 FIRE HYDRANTS or Tyton (6"),6, or 8" A EDDY FIRE HYDRANTS PARTS LIST WORKING PRESSURE: 150 PSI Note: Discontinued For Reference Only 350 PSI Working Pressure
More informationAWWA C504 - BUTTERFLY VALVES
License Number 6D-1724 AWWA C504 - BUTTRFLY VALVS License Number 6D-1724. Gate Valves Knife Gate Valves Ball Valves Check Valves Plug Valves Air Release Valves Oil and Gas Water and Sewage, Chemicals Paper
More informationFILTERS, STRAINERS AND VALVES PRODUCT GUIDE
FILTERS, STRAINERS AND VALVES PRODUCT GUIDE TEE FILTERS INLINE FILTERS BRASS FILTERS SPIN ON FILTERS OFF-LINE FILTRATION Y STRAINERS BASKET STRAINERS DUPLEX STRAINERS STRAINING ELEMENTS FRP STRAINERS DUAL
More informationND = Double Door, SEAT NBR ES = Center Guided Silent Check / EPDM NS = Center Guided Silent Check / NBR. Butterfly Valves, Seat in body.
MAS-WDI-1118 MAS W-Series Water Works / Fire Protection Valves ORDERING CODES Series XX = Valve Type X = CWP XX = Design Type XX = End Connection W = AWWA/UL/FM, 10 = Gate Valve A = 300 CWP RS = Rising
More informationCARBON STEEL PIPE - BUTTWELD
010-1 CARBON STEEL PIPE - BUTTWELD WEIGHT BLACK GALVANIZED FUSION BOND SIZE LBS/FT T & C P.E. T & C P.E. 1/8" 0.24 8.00 6.09 16.40 14.28 1/4" 0.42 9.61 8.25 15.27 12.91 3/8" 0.57 10.98 9.52 16.91 14.39
More informationHydraulic Valves Needle Valves
Table of Contents 1 Hydraulic Valves Needle Valves TMN Series FFG 2000 Series FFA 2000 Series 2-3 4-5 6-7 Check Valves C Series 8-9 Flow Controls TMF Series 10-11 Low Pressure Ball Valve S95 NPT Series
More informationDivision 23 - HVAC Section Switzerland Beallsville K-12 GENERAL DUTY VALVES FOR HVAC PIPING
SECTION 23 05 23 GENERAL-DUTY VALVES FOR HVAC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and General Provisions of the Contract, including General and Supplementary Conditions and Division
More informationBRASS & BRONZE VALVES
BRASS & BRONZE VALVES V200 series Cast Brass are economical general service valves. Ball valves feature chrome plated balls with teflon seats, adjustable packing glands and blowout-proof stems. V205 gate
More informationMars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends
SPECIFICATION See our full range online at: www.vip-ltd.co.uk Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends VIP Product Codes 04/0466 (BSP)
More informationFEATURES FLP SERIES COMPLETE ASSEMBLIES FL SERIES PRODUCT CONFIGURATOR ONE VALVE DOES IT ALL
Thermal Shutdown Valves for Fire Protection Systems FLP SERIES COMPLETE ASSEMBLIES BI-TORQ Valve Automation s complete line of API 0 certified quarter-turn valves suit a wide range of applications. Carbon
More informationBS 5163 Resilient Wedge Gate Valve
BS 516 Resilient Wedge Gate Valve BS 516 Flanged Resilient OS&Y Gate Valve, Type A, (XZ41X), /16, Gate valves serve to cut the medium flow in the piping system, widely used in the field of potable water,
More informationIndex. Butterfly Valves
Dry Bulk - Chemical - Petroleum Dry Bulk - Chemical - Petroleum Nozzles Nozzles & Valves & Index Index Part No. Description Page Nozzles P- 202 Overwing Aircraft Refueling, Bronze 1 P- 2022 Overwing Aircraft
More information