metering valves Metering Valves Index 1300 Series Series Series 8

Size: px
Start display at page:

Download "metering valves Metering Valves Index 1300 Series Series Series 8"

Transcription

1 Metering Valves Index 1300 Series 1 0 Series 300 Series HOKE Inc. PO Box Spartanburg, SC Phone () Fax () Sales-hoke@circor.com metering valves

2 Milli-Mite 1300 Series Forged Metering Valves Typical Applications Fine metering in medical and biochemical gas or vapor analysis Sampling and analyzing water and air pollution Chromatographs, mass spectrometers and other instruments where fine metering is required Technical Data BODY* 31 stainless steel, brass MAXIMUM Brass OPERATING PRESSURE 3000 psig (07 70 F (1 C) 31 stainless steel 5000 psig (35 bar) OPERATING TEMPERATURE RANGE Brass -5 to 00 F (-5 to 0 C) 31 stainless steel -5 to 50 F (-5 to 3 C) ORIFICE.07 (1.19 mm) CV FACTOR 1 stem =.0 Cv 3 stem =.0 Cv * Consult factory for other materials HOKE Inc. PO Box Spartanburg, SC Phone () Fax () Sales-hoke@circor.com Features & Benefits Metering accuracy - 1 turn displacement of stem provides unparalleled performance and repeatability 1 and 3 stems provide a wide flow range with ultra fine metering control Panel mounting is standard for all valves Precision orifice and close thread tolerances minimize hysteresis Micrometer vernier handle provides visual control and repeatable stem settings Dyna-Pak wafer packing below the stem threads provides leak tight service Special High Tolerance NPT Thread metering valves

3 Milli-Mite 1300 Series Materials of Construction DESCRIPTION MATERIAL 1 Handle, black anodized Aluminum Alloy Set Screw Alloy Steel 1 3 Graduated sleeve 30 SS Metering Stem 31 stainless 5 Panel nut Brass Upper spacer 31 stainless 7 Dyna-Pak wafer PTFE 3 5 Lower spacer 31 stainless 9 Body 31 stainless or brass 7 Integrated seat & spacer 31 stainless 11 Orifice seal PTFE 9 11 Dimensions FLOW PATTERN GLOBE ANGLE CONNECTIONS DIMENSIONS A INLET B OUTLET D E F 1/ NPT Female 1/ NPT Female mm mm 1/ NPT Male 1/ NPT Male mm mm 1/ NPT Male 1/ mm 5mm 1/ NPT Male 1/ NPT Male 1/ 1/ 1/ 1/ 3mm mm 3mm mm 1/ NPT Female 1/ NPT Female 1/ NPT Male 1/ 1/ 1/ 1/ 1/ 3mm mm 3mm mm mm mm mm 0mm mm 0mm mm 0mm mm 0mm mm 33mm mm 33mm mm 1mm mm 1mm mm 1mm mm 1mm.50 13mm A F E F D B D B Dimensions for reference only, subject to change. Panel mounting Panel hole =.5 (13 mm) diameter Panel thickness =.1 ( mm) maximum HOKE Metering Valves A E

4 Milli-Mite 1300 Series Reference Flow Curves 1 1 STEM.07 ORIFICE 1 3 STEM.07 ORIFICE NUMBER OF VALVE HANDLE TURNS NUMBER OF VALVE HANDLE TURNS Cv Cv How to Order FLOW PATTERN GLOBE ANGLE A INLET CONNECTIONS B OUTLET 31SS VALVES ORDER BY NUMBER BRASS VALVES 1 STEM 3 STEM 1 STEM 3 STEM CV = 0.0 CV = 0.0 CV = 0.0 CV = NPT Female 1 NPT Female 1315FY 1 NPT Male HB 1315HB 1 NPT Male 1 NPT Male 1335MB 1315MB ¼ NPT Male ¼ NPT Male 1335 MY 1315MY 1335MB 1315MB GY 1315GY 1335GB 1315GB ¼ ¼ 1335GY 1315GY 1335GB 1315GB 3mm 3mm 1335G3YMM 1315G3YMM mm mm 1335GYMM 1315GYMM 1 NPT Female 1 NPT Female 135FB 135FB 1 NPT Male 1 135HY 135HY 135HB 135HB GY 135GY 135GB 135GB ¼ ¼ 135GY 135GY 135GB 135GB 3mm 3mm 135G3YMM 135G3YMM mm mm 135GYMM 135GYMM 135GBMM 135GBMM 1 NPT Female 1 NPT Female 135FB FOR YOUR SAFETY IT IS SOLELY THE RESPONSIBILITY OF THE SYSTEM DESIGNER AND USER TO SELECT PRODUCTS SUITABLE FOR THEIR SPECIFIC APPLICATION REQUIREMENTS AND TO ENSURE PROPER INSTALLATION, OPERATION AND MAINTENANCE OF THESE PRODUCTS. MATERIAL COMPATIBILITY, PRODUCT RATINGS AND APPLICATION DETAILS SHOULD BE CONSIDERED IN THE SELECTION. IMPROPER SELECTION OR USE OF PRODUCTS DESCRIBED HEREIN CAN CAUSE PERSONAL INJURY OR PROPERTY DAMAGE. Ordering Options Spare Parts Spare parts and repair kits are available for all needle valves. Please contact your distributor for specific information. Cleaning and Testing When ordering, please specify if oxygen cleaning or helium leak testing is required. Additional Sizes Additional sizes and options are available on special request. Please consult your local HOKE distributor. HOKE Metering Valves 3

5 Micromite 0 Series Forged Metering Valves Typical Applications Chromatography Mass Spectroscopy Sampling and fine metering Pollution analyzing instrumentation Technical Data BODY* 31 stainless steel, brass MAXIMUM Brass OPERATING PRESSURE 3500 psig ( 70 F (1 C)** 31 stainless steel 5000 psig (35 bar) OPERATING -0 to +50 F (-9 to +11 C) TEMPERATURE RANGE ORIFICE (0.79 mm) CV FACTOR * Consult factory for other materials ** Valve is not designed for shut-off. Pressure ranges for metering only HOKE Inc. PO Box Spartanburg, SC Phone () Fax () Sales-hoke@circor.com Features & Benefits 1 turn non-rotating stem Low internal volume provides low flow control Non-rotating stem minimizes unwanted variability of flow rate Unique thread design allows tapered needle portion of the stem to be withdrawn into the outer stem O-ring seals below the stem threads provide smooth operation and eliminate backlash Panel mounting is standard for all models Dial indicator provides repeatable positioning of stem in full turns and tenths of a turn from closed to fully open. Position by finger tip rotating the knurled aluminum dial. A position lock prevents accidental movement of the handle and resulting errors in flow data. The size and design of the handle assembly provide an attractive appearance for equipment panels. Special High Tolerance NPT Thread metering valves

6 Micromite 0 Series Materials of Construction DESCRIPTION MATERIAL 1 BODY 31 stainless or brass O-RING Fluorelastomer or Buna-N 3 O-RING Fluorelastomer or Buna-N PANEL NUT Brass 5 WASHER Fluorelastomer WASHER 30 stainless 7 STEM AND PIN 31 stainless SET SCREW Alloy steel 9 HANDLE Aluminum SPINDLE 31 stainless 11 SCREW 31 stainless 1 FRICTION WASHER Delrin AF 13 FRICTION WASHER Glass cloth 1 BONNET 31 stainless 15 RETAINER PCTFE 1 GLAND 31 stainless 17 SEAT 31 stainless HOKE Metering Valves 5

7 Micromite 0 Series Dimensions FLOW PATTERN GLOBE ANGLE CONNECTIONS DIMENSIONS PANEL MOUNTING PART NUMBER BODY MATERIAL O RING A INLET B OUTLET D E F MAXIMUM THICKNESS HOLE SIZE 1/ FNPT 1/ FNPT 15FBA BRASS Buna-N 1/ MNPT 1/ MNPT 15MBA BRASS Buna-N 1/ MNPT 1/ MNPT 15MBA BRASS Buna-N 1/1 1/ 1/ 1/1 1/ 1/ 15G1BA BRASS Buna-N 15GBA BRASS Buna-N 15GBA BRASS Buna-N 1/ FNPT 1/ FNPT 15FYA 31 SS Buna-N 1/ MNPT 1/ MNPT 15MYA 31 SS Buna-N 1/ MNPT 1/ MNPT 15MYA 31 SS Buna-N 1/1 1/ 1/ 1/1 1/ 1/ 1/1 1/ 1/ 1/1 1/ 1/ 1/1 1/ 1/ 1/1 1/ 1/ Dimensions for reference only, subject to change. 15G1YA 31 SS Buna-N 15GYA 31 SS Buna-N 15GYA 31 SS Buna-N 15G1YA 31 SS Fluorelastomer 15GYA 31 SS Fluorelastomer 15GYA 31 SS Fluorelastomer 1G1YA 31 SS Fluorelastomer 1GYA 31 SS Fluorelastomer 1GYA 31 SS Fluorelastomer F mm inch 3 ¼ 1 3/ 1 1/ 5/ mm inch 3 ¼ 1 3/ 1 1/ 5/ mm inch 3 ¼ 1 3/ 1 1/ 5/ mm inch 1/ 1 3/ 9 1/3 5/3 mm inch 1/ 1 3/ 9 1/3 5/3 mm inch 1/ 1 3/ 9 1/3 5/3 mm inch 3 1/ 1 3/ 1 1/ 5/ mm inch 3 1/ 1 3/ 1 1/ 5/ mm inch 3 1/ 1 3/ 1 1/ 5/ mm inch 3 1/ 3/ 1 1/ 5/ mm inch 3 1/ 3/ 1 1/ 5/ mm inch 3 1/ 3/ 1 1/ 5/ mm inch 3 1/ 3/ 1 1/ 5/ mm inch 3 1/ 3/ 1 1/ 5/ mm inch 3 1/ 3/ 1 1/ 5/ mm inch 3 1/ 3/ 1 1/ 5/ mm inch 1 5/ 1 1/ 5/ mm inch 1 5/ 1 1/ 5/ F D D A B B HOKE Metering Valves E A E

8 Micromite 0 Series Reference Flow Curve 1 1 NUMBER OF VALVE HANDLE TURNS 1 1 How to Order C v x -3 Metering range is approximately 1 handle turns. Opening the valve beyond the metering range will increase the flow to full Cv. FLOW PATTERN GLOBE ANGLE A Inlet CONNECTIONS B Outlet BRASS WITH BUNA-N 31 STAINLESS STEEL WITH BUNA-N 31 STAINLESS WITH FLUORELASTOMER 1 FNPT 1 FNPT 15FBA 15FYA 1 MNPT 1 MNPT 15MBA 15MYA ¼ MNPT ¼ MNPT 15MBA 15MYA G1BA 15G1YA 15G1YA GBA 15GYA 15GYA GBA 15GYA 15GYA G1YA 1 1 1GYA 1 1 1GYA To Order the Dial Indicator, order Kit 0K. If valve and kit are to be factory assembled, please note Factory Assembled on order FOR YOUR SAFETY IT IS SOLELY THE RESPONSIBILITY OF THE SYSTEM DESIGNER AND USER TO SELECT PRODUCTS SUITABLE FOR THEIR SPECIFIC APPLICATION REQUIREMENTS AND TO ENSURE PROPER INSTALLATION, OPERATION AND MAINTENANCE OF THESE PRODUCTS. MATERIAL COMPATIBILITY, PRODUCT RATINGS AND APPLICATION DETAILS SHOULD BE CONSIDERED IN THE SELECTION. IMPROPER SELECTION OR USE OF PRODUCTS DESCRIBED HEREIN CAN CAUSE PERSONAL INJURY OR PROPERTY DAMAGE. Ordering Options Spare Parts Spare parts and repair kits are available for all needle valves. Please contact your distributor for specific information. Cleaning and Testing When ordering, please specify if oxygen cleaning or helium leak testing is required. Additional Sizes Additional sizes and options are available on special request. Please consult your local HOKE distributor. HOKE Metering Valves 7

9 300 Series Bar Stock Metering Valves Typical Applications Metering liquids and gases on analytical equipment Laboratory sampling Gas chromatography, analyzers Flow meters and gauges Technical Data BODY* 31 stainless steel, brass MAXIMUM OPERATING PRESSURE Brass 3000 psig up to 00 F (07 93 C) 31 stainless steel 3000 psig 0 F (07 3 C) 00 psig 50 F (.9 11 C) OPERATING TEMPERATURE RANGE Buna N O-ring Packing -0 to 00 F (-0 to 93 C) PTFE Packing -0 to 50 F (-51 to 11 C) ORIFICE.0,.15 (1.59 mm, 3.17 mm) CV FACTOR** 1 stem, 0.0 orifice: 0.01 stem, 0.0 orifice: 0.0 stem, 0.15 orifice: 0.30 * Consult factory for other materials ** Cv factors shown are based on flow through entire metering range, approximately 0 handle turns HOKE Inc. PO Box Spartanburg, SC Phone () Fax () Sales-hoke@circor.com Features & Benefits Micrometer vernier handle provides visual control and precise establishment of flow settings. To order, specify 300K1 following the valve number. 0 turn stem displacement for fine metering orifice sizes 0.0 (1.59mm) and 0.15 (3.17mm) are available with standard stem Spring loaded stem in all 31 stainless steel valves prevents galling and enlargement of the orifice. For ultra fine metering, a 1 spring loaded stem design is available for all valves with 0.0 (1.59mm) orifice. See flow curves for details. Panel mounting is standard on all valves Bonnet lock prevents accidental disengagement of bonnet. Special High Tolerance NPT Thread metering valves

10 300 Series Materials of Construction 31 Stainless Steel Valves (PTFE Packing) Brass Valves (Buna-N Packing) DESCRIPTION MATERIAL 1 DESCRIPTION MATERIAL 1 CAP NUT (-) Zinc Alloy 1 CAP NUT (-) Zinc Alloy HAND WHEEL* Nylon 3 WASHER PTFE PACKING PTFE 5 PACKING NUT 31 stainless MOUNTING NUT 31 stainless 7 HOUSING 31 stainless BODY 31 stainless 9 SPINDLE POINT 31 stainless SEAT PCTFE 11 SEAT HOLDER 31 stainless 1 BALL 31 stainless 13 COMPRESSION SPRING 31 stainless 1 STEM 31 stainless * Optional micrometer handle - Aluminum Dimensions FLOW PATTERN GLOBE ANGLE A & B CONNECTIONS ¼ NPT FEMALE 1/ NPT FEMALE ¼ ¼ NPT FEMALE 1 NPT FEMALE F[ ]Y / 315F[ ]Y stainless steel PANEL MOUNTING DIMENSIONS D D E F F H H PANEL THICKNESS HOLE SIZE inch mm inch mm inch mm inch mm inch mm HAND WHEEL* Nylon 3 STEM 31 stainless WASHER Nylon 5 O-RING Buna-N PACKING NUT Brass 7 MOUNTING NUT FCB HOUSING Brass 9 BODY Brass * Optional micrometer handle - Aluminum 331F[ ]B Brass Dimensions for reference only, subject to change. F F 1/ dia panel hole D D 1/ dia panel hole H H A H B A B H E E 335G[ ]Y / 315G[ ]Y 31 stainless steel HOKE Metering Valves 335FY / 315FY 31 stainless steel (with optional micrometer handle) HOKE Metering Valves 9

11 300 Series Curves 0 1 STEM POINT.0 ORIFICE 0 STEM POINT.0 ORIFICE 0 STEM POINT.15 ORIFICE NUMBER OF VALVE HANDLE TURNS NUMBER OF VALVE HANDLE TURNS NUMBER OF VALVE HANDLE TURNS Cv Cv Cv How to Order FLOW PATTERN GLOBE ANGLE 31 STAINLESS STEEL VALVES BRASS VALVES CONNECTIONS PTFE PACKING BUNA-N O-RING PACKING 1 STEM SPRING LOADED STEM SPRING LOADED STEM SPRING LOADED SOLID STEM SOLID STEM.0 ORIFICE.0 ORIFICE.15 ORIFICE.0 ORIFICE.15 ORIFICE 1 NPT FEMALE 355FY 315FY 335FY 311FB 331FB ¼ NPT FEMALE 355FY 315FY 335FY 311FB 331FB ¼ 355GY 315GY 335GY 331GB 1 NPT FEMALE 31FB 31FB ¼ NPT FEMALE 31FB 31FB Ordering Options Spare Parts Spare parts and repair kits are available for all needle valves. Please contact your distributor for specific information. Cleaning and Testing When ordering, please specify if oxygen cleaning or helium leak testing is required. Additional Sizes Additional sizes and options are available on special request. Please consult your local HOKE distributor. HOKE Metering Valves

12 Liquid Flow capacity of HOKE Metering Valves To determine the Cv or flow of a 0 F (1 C): Cv = where: GPM Δp S.G. or GPM = Cv Δp S.G. Δp = p1 p p1 = inlet pressure in psia p = outlet pressure in psia GPM = flow in gallons per minute S.G. = specific gravity of liquid where water = 0 F (1 C) Cv Factor psi 50 psi 0 psi Cv vs. Capacity 50 psi 500 psi 1,000 psi Water Flow Capacity (gal/min) Gas Flow capacity of HOKE Metering Valves To determine the Cv or flow of a 70 F (1 C): Cv = where: 130 SCFH (Δp) (p 1 ) (0 + T) (S.G.) or SCFH = 130 Cv (Δp) (p 1 ) (0 + T) (S.G.) Δp = p1 p p1 = inlet pressure in psia p = outlet pressure in psia SCFH = flow in standard cubic feet per hour S.G. = specific gravity of gas where air = 70 F (1 C) and 1.7 psia T = temperature in F Cv Factor Cv vs. Capacity psi 50 psi 0 psi 50 psi 500 psi Air Flow Capacity (SCFM) 1,000 psi Specifying metering valves for critical analytical instrumentation and applications which demand precise stem positioning requires a complete knowledge of your process conditions. Before you start, it is important that your flow requirements be defined in terms of Cv or flow coefficient. Cv is the valve flow coefficient expressing the rate of flow in gallons per minute of 0 F water with a pressure drop of 1 PSI across the valve. By correctly using the formula for liquids or gases, you will obtain an accurate Cv, necessary for your valve selection. Cv should be calculated for expected variations in pressure and required flow range. The Cv range for HOKE metering valves is approximately to 1. This is illustrated in the Cv vs handle turns flow curves shown with each valve series. Note that the more handle turns required to achieve a specified change in flow, the greater the valve s accuracy. The Cv range providing best control should fall within the straight portion of the curve with the nominal value centered. Using the straight portion of the curve gives approximately the same incremental flow for each turn of the valve handle. Once Cv requirements are determined, the following steps must be evaluated before making your final valve selection. 1. Define Pressure/Temperature Requirements HOKE metering valves are available from moderate vacuum to 5000 psig. Operating temperatures range from -5 to 50 F. There are no restrictions on pressure drop or downstream pressure for HOKE valves, however, best performance will be obtained if the downstream pressure is more than 50% of the inlet pressure.. Know Your Material Requirements Corrosion resistance should be your prime consideration when selecting materials, particularly the wetted or pressure boundary parts. There are times when the environment must also be considered in addition to the fluid media. The pressure/temperature demands of materials are normally covered by the material manufacturer s product specifications. HOKE products are designed using materials of similar corrosion properties whenever possible. If material selection is critical, please contact your nearby HOKE distributor. He can recommend options to help solve your problem. 3. Options Dial Indicator and micrometer handles are available for reproducing stem positioning. The HOKE Milli-Mite 1300 series is provided with a micrometer handle as standard equipment. Other handle options are available or can be made to order.. Final Performance Engineering design and manufacturing standards are critical elements of the metering valve you select and will affect its actual performance. Total control of these quality elements at HOKE assures you of valves with excellent stem positioning repeatability, low hysteresis, and extended metering range. HOKE Metering Valves 11

13 Notes 1 HOKE Metering Valves

14 CIRCOR Instrumentation Technologies (CIT) is the logical choice for fluid control solutions. We provide the lowest cost of ownership, offering the best in class reliability and availability of our products. We have global coverage, delivering value in the form of local, flexible service to meet our customer s needs. CIT is a product group specializing in instrumentation with orifice sizes typically up to. PO Box Spartanburg, SC Tel Fax Sales-hoke@circor.com Our headquarters and ISO 9001:00 certified manufacturing facilities are located at 05 Centura Court Spartanburg, SC, USA, Proudly Distributed By: 79013ENG 07/1 APS007

needle valves Needle Valves

needle valves Needle Valves Needle Valves Index At a Glance 1 1700 Series 5 Forged Body, Integral Bonnet Needle Valves 2100 Series 8 Bar Stock, Screwed Bonnet Needle Valves 2200 Series 12 Bar Stock, Screwed Bonnet Needle Valves 2219

More information

needle valves Needle Valves

needle valves Needle Valves Needle Valves Index At a Glance 1 1700 Series 5 Forged Body, Integral Bonnet Needle Valves 2100 Series 8 Bar Stock, Screwed Bonnet Needle Valves 2200 Series 12 Bar Stock, Screwed Bonnet Needle Valves 2219

More information

ball valves General Purpose Ball Valves

ball valves General Purpose Ball Valves General Purpose Ball Valves Index At a Glance 2 Flomite 71 Series 4 2-Way valves Rotoball 72 Series 9 2-Way valves Ultramite 70 Series 12 2- & 3-Way valves Selectomite 71 & 76 Series 19 3-Way Ball Valves

More information

instrumentation ball valves

instrumentation ball valves 7G Series 2 and 3-way Ball Valves Multi-directional Flow HOKE Inc. 405 Centura Court PO Box 4866 (29305) Spartanburg, SC 29303 Phone (864) 574-7966 Fax (864) 587-5608 www.hoke.com sales@hoke.com instrumentation

More information

instrument manifolds Instrument Manifolds Index General Purpose Manifolds Overview 1 2 Valve 2 3 Valve 4 5 Valve 6 Mounting kits 8

instrument manifolds Instrument Manifolds Index General Purpose Manifolds Overview 1 2 Valve 2 3 Valve 4 5 Valve 6 Mounting kits 8 Instrument Manifolds Index General Purpose Manifolds Overview 1 2 Valve 2 3 Valve 4 5 Valve 6 Mounting kits 8 Special Application Manifolds Trifold 3 Valve 9 Rotofold 3 Valve 12 Pentafold 5 Valve 15 Mounting

More information

Formed Sampling Cylinders and Accessories Index amp ling cylinde HOKE Inc.

Formed Sampling Cylinders and Accessories Index amp ling cylinde HOKE Inc. Formed Sampling Cylinders and Accessories Index Sampling Cylinders 2 Design, Features, Applications Cylinder Accessories 3 Collars, Flanges, Caps, Carrying Handles Safety Relief Devices Cylinder Valves

More information

Space Saver. Space Saver Actuators. Air Actuated 0700 Series

Space Saver. Space Saver Actuators. Air Actuated 0700 Series Actuators Air Actuated 0700 Series HOKE Incorporated 405 Centura Court PO Box 4866 (29305) Spartanburg, SC 29303 Phone (864) 574-7966 Fax (864) 587-5608 www.hoke.com sales@hoke.com Space Saver Air Actuated

More information

packless valves Packless Valves Index Bellows & Diaphragm

packless valves Packless Valves Index Bellows & Diaphragm Packless Valves Bellows & Diaphragm Index 0300 Series (Bellows) 1 4100 Series (Bellows) 4 4200 Series (Bellows) 8 4500 Series (Bellows) 11 4600 Series (Diaphragm) 13 DV1 Series (Diaphragm) 17 HOKE Inc.

More information

spun sampling cylinders

spun sampling cylinders HOKE Inc. PO Box 4866 Spartanburg, SC 29305-4866 Phone (864) 574-7966 Fax (864) 587-5608 www.hoke.com Sales-hoke@circor.com spun sampling cylinders 316 Stainless Steel DOT Series Typical Applications Sampling

More information

actuators Electric Actuators

actuators Electric Actuators Electric Actuators Index 90 Unidirectional 4 Actuators for 2 and 4 Way Ball Valves 180 Unidirectional 6 Actuators for 3 Way Ball Valves 90 Unidirectional Reversible 8 Actuators for 3 Way Ball Valves 4

More information

instrumentation ball valves

instrumentation ball valves 7G Series 2 and 3-way Ball Valves Multi-directional Flow HOKE Inc. 405 Centura Court PO Box 4866 (29305) Spartanburg, SC 29303 Phone (864) 574-7966 Fax (864) 587-5608 www.hoke.com sales@hoke.com instrumentation

More information

quick couplings HQC Series Instrumentation Quick Couplings Typical Applications Features & Benefits Technical Data

quick couplings HQC Series Instrumentation Quick Couplings Typical Applications Features & Benefits Technical Data HQ Series Instrumentation Quick ouplings Typical pplications Laboratories University labs Gas distribution iopharmaceutical Technical Data ONSTRUTION 36 Stainless steel* NOMINL FLOW SIZES /4, 3/8, / MXIMUM

More information

Rotary Plug Valves (PR Series) Catalog 4126-PR Revised, July 2003

Rotary Plug Valves (PR Series) Catalog 4126-PR Revised, July 2003 Rotary Plug Valves (PR Series) Catalog 4126-PR Revised, July 2003 PR Series Rotary Plug Valves Introduction Parker PR Series Plug Valves provide positive leak tight shut-off, high flow capacity, and quick

More information

Flow Limit Safety Shutoff Valves Model 1

Flow Limit Safety Shutoff Valves Model 1 Flow Limit Safety Shutoff Valves Model 1 Model 1 Series flow limit safety shutoff valves automatically shutoff all flow from the cylinder when flow exceeds a factory preset level. The Model 1 is normally

More information

ball valves ball valves 7 Series Fire Safe 2-way, 3-piece Bolted Ball Valves

ball valves ball valves 7 Series Fire Safe 2-way, 3-piece Bolted Ball Valves 7 Series Fire Safe 2-way, 3-piece Bolted Ball Valves HOKE s 7 Series Fire Safe Valves meet demanding application requirements in the production environment of chemical and petrochemical processing facilities.

More information

needle valve 2219 Series Severe Service Needle Valves

needle valve 2219 Series Severe Service Needle Valves 2219 Series Severe Service Needle Valves HOKE Incorporated 405 Centura Court PO Box 4866 (29305) Spartanburg, SC 29303 Phone (864) 574-7966 Fax (864) 587-5608 www.hoke.com sales@hoke.com needle valve 2219

More information

S, M, L, and 31 Series. Straight-pattern flow coefficients (C v ) from to Low- and high-pressure service

S, M, L, and 31 Series.  Straight-pattern flow coefficients (C v ) from to Low- and high-pressure service www.swagelok.com Metering Valves S, M, L, and Straight-pattern flow coefficients (C v ) from 0.004 to 0.16 Low- and high-pressure service Repeatable vernier handles available rass and 316 stainless steel

More information

INSTRUMENTATION METERING VALVES. VMT Series.

INSTRUMENTATION METERING VALVES. VMT Series. INSTRUMENTATION METERING VALVES VMT Series www.unilok.com Features Pressure rating up to VMTS series - 2000psig (137bar) VMTL & VMTM series - 1000psig (69bar) Temperature rating from -23 C(-10 F) to 204

More information

Locked Bonnet Needle Valves

Locked Bonnet Needle Valves Locked Bonnet Needle Valves Series Working Pressures up to 6000 psig (413 bar) Temperature Range from -65 to 1200 F (- 53 C to 648 C) Flow Coefficients up to 2.18 Locked bonnet eliminates accidental disassembly

More information

HOKE Monoflange Valves. Primary Isolation Valves

HOKE Monoflange Valves. Primary Isolation Valves HOKE Monoflange Valves Primary Isolation Valves Table of Contents Conventional Double Block & Bleed Assembly... 3 Applications, Specifications, Features & Benefits... 4 Features Cutaway... 5 HOKE Integral

More information

One-Piece Ball Valves. VB2GB, VB23GB Series

One-Piece Ball Valves. VB2GB, VB23GB Series One-Piece Ball Valves VB2 & VB2G Series 1/8 to 1/2 in. (3 to 12 mm OD) Up to 3000 psig (206 bar) Stainless Steel, Brass Catalog No. VB2-2 Aug. 2015 Features Directional Handle indicates flow direction.

More information

120 SERIES ONE PIECE TYPE

120 SERIES ONE PIECE TYPE 120 SERIES ONE PIECE TYPE SBV 120H Series Features Simple design with one piece body Tight and smooth, low torque and easy operation One-piece ball stem Panel mountable Variety of End Connections Straight,

More information

VN Series Needle Valves

VN Series Needle Valves VN Series Needle Valves VN5, VN6, and VNS6 Series Regulating and Shut-Off Applications Catalog No. VN-2 January 2015 VN5 Series Integral-Bonnet Needle Valves VN6 Series Bar-Stock Needle Valves VNS6 & VNS10

More information

Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas productio

Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas productio Check Valves (C Series) Catalog 4130-C Revised, July 2004 Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas production

More information

Be llows-se aled Valve s

Be llows-se aled Valve s www.swagelok.com Be llows-se aled Valve s U Secondary containment system above the bellows Working pressures up to 2500 psig (172 bar) Temperatures up to 1200 F (648 C) 1/4, 3/8, 1/2, 3/4, and 1 in.; 6,

More information

Metering Valves Catalog 4170-MV December 2010

Metering Valves Catalog 4170-MV December 2010 Metering alves Catalog 4170-M December 2010 M and L Series Metering alves Catalog 4170-M Introduction The Parker M and L Series of metering valves provide higher flow rates than the S Series of metering

More information

Screwed Bonnet Needle Valves. Needle Valves

Screwed Bonnet Needle Valves. Needle Valves 89 Design & Features Hard (Vee) or Delrin Soft Seat/Tip Orifice sizes from.172 to.438 in. Flow Coefficients (Cv) from.37 to 2.7 Straight or angle flow patterns Optional panel mount Handle options available

More information

High-Pressure Needle Valves

High-Pressure Needle Valves www.swagelok.com High-Pressure Needle Valves Working pressures up to 4 000 psig (3100 bar) Temperatures up to 40 F (232 C) Weep holes for leak detection Packing below stem threads Nonrotating stem design

More information

Colorflow and Ball Valves. Industrial Flow Control, Check, Gauge Control. Catalog HY /US

Colorflow and Ball Valves. Industrial Flow Control, Check, Gauge Control. Catalog HY /US Colorflow and Industrial Flow Control, Check, Gauge Control Catalog HY14-3300/US Colorflow and Fully guided poppets are used on Colorflow valves rather than the less durable ball-check type construction.

More information

Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas productio

Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas productio Check Valves (CO Series) Catalog 4130-CO Revised, June 2001 Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas

More information

SERIES. CRYOGENIC/PRESSURE BUILD REGULATOR 3/8 and 1/2" NPT, BSPT Inlet 400 Psig (28 Bar) Description

SERIES. CRYOGENIC/PRESSURE BUILD REGULATOR 3/8 and 1/2 NPT, BSPT Inlet 400 Psig (28 Bar) Description CRYOGENIC/PRESSURE BUILD REGULATOR 3/8 and 1/2" NPT, BSPT Inlet 400 Psig (28 Bar) CR Description The Generant Series CR Cryogenic Regulator provides high flow during Cryogenic Vessel Pressure Build function

More information

PORTER FLOWMETERS & FLOW CONTROLLERS. Technology you can trust

PORTER FLOWMETERS & FLOW CONTROLLERS. Technology you can trust PORTER FLOWMETERS & FLOW CONTROLLERS Technology you can trust PORTER PRECISION FLOWMETERS AND FLOW CONTROLLERS you can trust Porter Instrument Company, Inc. is a leading manufacturer of specialized components

More information

Pressure Regulators K Series

Pressure Regulators K Series www.swagelok.com Pressure Regulators K Series Pressure-reducing models Back-pressure models Gas cylinder changeover model Vaporizing models Pressure Regulators, K Series 2 Swagelok K Series Pressure Regulator

More information

Ball Valves (B Series) Catalog 4121-B September 1999

Ball Valves (B Series) Catalog 4121-B September 1999 Ball Valves (B Series) Catalog 4121-B September 1999 Two-Way B Series Ball Valves Introduction Parker manually, pneumatically, and electrically actuated two-way B Series Ball Valves provide quick 1/4 turn

More information

ANDERSON GREENWOOD. Hand Valves and Accessories INSTRUMENTATION PRODUCTS. Soft Seated Valves Hard Seated Valves Mini Valves

ANDERSON GREENWOOD. Hand Valves and Accessories INSTRUMENTATION PRODUCTS. Soft Seated Valves Hard Seated Valves Mini Valves ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS Hand Valves and Accessories Soft Seated Valves Hard Seated Valves Mini Valves Anderson Greenwood is the industry leader in instrument valve technology and the

More information

Yarway Hy-Drop Throttling valve

Yarway Hy-Drop Throttling valve YARWAY Controls the destructive forces inherent in high pressure drop service through rapid energy dissipation Features Dual range throttling - primary range plus a super capacity blast range. Rapid energy

More information

Technology for a Better Future. VALVES International Edition.

Technology for a Better Future. VALVES International Edition. www.genstartech.com VALVES International Edition (Needle Valve, Metering Valve, Ball Valve, Diaphragm Valve, Gauge Valve, Check Valve, Excess Flow Valve, Relief Valve, Cylinder Valve) Technology for a

More information

Hydraulic Valves Needle Valves

Hydraulic Valves Needle Valves Table of Contents 1 Hydraulic Valves Needle Valves TMN Series FFG 2000 Series FFA 2000 Series 2-3 4-5 6-7 Check Valves C Series 8-9 Flow Controls TMF Series 10-11 Low Pressure Ball Valve S95 NPT Series

More information

Needle Valves (VQ Series) Catalog 4110-VQ Revised, July 2001

Needle Valves (VQ Series) Catalog 4110-VQ Revised, July 2001 Needle Valves (VQ Series) Catalog 4110-VQ Revised, July 2001 Introduction Parker VQ Series Needle Valves are the right combination of performance and value for manual or pneumatic onoff control in moderate

More information

Ball Valves (B Series) Catalog 4121-B Revised, November 2001

Ball Valves (B Series) Catalog 4121-B Revised, November 2001 Ball Valves (B Series) Catalog 4121-B Revised, November 2001 Two-Way B Series Ball Valves Introduction Parker manually, pneumatically, and electrically actuated two-way B Series Ball Valves provide quick

More information

Thermo Scientific Gilmont

Thermo Scientific Gilmont Direct Reading Laboratory Flowmeters Instruments Wide selection of flow ranges measure air from 0.02 ml/min to 137 LPM or water from 0.0002 ml/min to 4.1 LPM Excellent chemical compatibility with glass

More information

Check Valves (C Series) Catalog 4130-C Revised, July 2004

Check Valves (C Series) Catalog 4130-C Revised, July 2004 Check Valves (C Series) Catalog 4130-C Revised, July 2004 Introduction Parker C Series Check Valves are designed for uni-directional flow control of fluids and gases in industries such as chemical processing,

More information

condensed catalog HOKE Condensed Catalog

condensed catalog HOKE Condensed Catalog HOKE Condensed Catalog Index Needle Valves1 Metering Valves 3 Ball Valves 5 Actuated Ball Valve Packages 7 Plug Valves 8 Fluid Control Components 9 Packless Valves Manifolds1 3 Sampling Cylinders1 4 Analytical

More information

MERCER VALVE SERIES Threaded THINK...MERCER FIRST MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY

MERCER VALVE SERIES Threaded THINK...MERCER FIRST MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY 9100 SERIES Threaded MERCER VALVE THINK...MERCER FIRST 9100 Series Threaded Product Overview The Mercer Valve 9100 Series Pressure Relief Valve is State of the

More information

BRASS BALL VALVES. CSA, UL, cul CGA 9.1 and FM Approved. Female NPT, Male NPT and Flare ends in various configurations from 3/8 to 1.0.

BRASS BALL VALVES. CSA, UL, cul CGA 9.1 and FM Approved. Female NPT, Male NPT and Flare ends in various configurations from 3/8 to 1.0. 195 Series Ball Valves BRASS BALL VALVES CSA, UL, cul CGA 9.1 and FM Approved. Female NPT, Male NPT and Flare ends in various configurations from 3/8 to 1.0. Hot forged brass body Blow-out nickel plated

More information

HIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES. VB6F Series.

HIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES. VB6F Series. HIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES VB6F Series www.unilok.com Features Pressure rating up to 6000psig (413bar) @21 (70 ) with standard PCTFE seats Temperature rating from -54 (-65 ) to 177

More information

SCREWED BONNET NEEDLE VALVES

SCREWED BONNET NEEDLE VALVES SCREWED BONNET NEEDLE VALVES H-99 SERIES FEATURES n Blowout-Proof Stem n MAWP* up to 1, psi (69 bar) n MAWT* up to 648 C (12 F) n End connection size range: to 1" or to 25mm n Flow Coefficient (Cv) to1.5

More information

Solution Partner. Leak - Proof. Flow & Control. Ball Valves SBV10 SBV30 SBV60 SFBV60. W e. s u p p o r t. t h e

Solution Partner. Leak - Proof. Flow & Control. Ball Valves SBV10 SBV30 SBV60 SFBV60. W e. s u p p o r t. t h e W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s Leak - Proof The Best Partner Flow & Control Solution Partner for Value Creation Ball Valves SBV SBV30 SBV60 SFBV60 SBVSeries For

More information

Solution Partner. Leak - Proof Flow & Control. Check & Relief Valves. W e. s u p p o r t. t h e. i n n o v a t i o n s. o f.

Solution Partner. Leak - Proof Flow & Control. Check & Relief Valves. W e. s u p p o r t. t h e. i n n o v a t i o n s. o f. W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s eak - Proof Flow & Control The Best Partner for Value Creation Solution Partner Check & Relief Valves Index Check & Relief Valves

More information

Ball and Plug Valves

Ball and Plug Valves Ball and Plug Valves Catalog 4121-BV March 2010 Parker Hannifin Corporation Catalog 4121-BV Table of Contents Description... Page B Series Ball Valves, 6,000 psi Maximum*...3 Two-Way...4 Three-Way...6

More information

Trunnion Ball Valves. TB Series. Wide variety of end connection types and sizes. Flow Coefficient: up to 1.6

Trunnion Ball Valves. TB Series.   Wide variety of end connection types and sizes. Flow Coefficient: up to 1.6 Trunnion Ball Valves Series Working Pressure: up to 10,000 psig (689 bar) End Connections: 1/8 to 3/4 in. (6 to 1 mm) Temperature Range: -40 to 450 F (-40 to 3 C) -way and 3-way valves Flow Coefficient:

More information

METERING VALVES H1300 SERIES.

METERING VALVES H1300 SERIES. METERING VLVES H00 SERIES www.hamlet.com METERING VLVES H00 SERIES H, HF & HXF00 SERIES FETURES Forgedbody St.St.or Brass Construction Straight and Patterns Panel Mounting MWP 000 psig ( bar) MWT 00 F

More information

Y610A, Y611A, and Y612A Series Vacuum Service Equipment and Relief Valves

Y610A, Y611A, and Y612A Series Vacuum Service Equipment and Relief Valves Y610A, Y611A, and Y612A Series Vacuum Service Equipment and Relief Valves July 2013 W1094_1 Figure 1. Type Y610A or Y610AP Vacuum Breaker Introduction The Y610A, Y611A, and Y612A Series devices (Figures

More information

condensed catalog HOKE Condensed Catalog Index

condensed catalog HOKE Condensed Catalog Index HOKE Condensed Catalog Index Needle Valves 1 Metering Valves 3 Ball Valves 4 Actuated Ball Valve Packages 7 Plug Valves 8 Fluid Control Components 9 Packless Valves 11 Manifolds 13 Sampling Cylinders 14

More information

Flow Controllers. Instrument / Analyzer Products. Catalog 4513/USA April 2005

Flow Controllers. Instrument / Analyzer Products. Catalog 4513/USA April 2005 Flow Controllers Instrument / Analyzer Products Catalog 4513/USA April 2005 Flow Controllers Veriflo A Leading Manufacturer of Precision Valves, Regulators & Surface Mount Components, Parker Hannifin Corporation

More information

Plug Valves. PV Series. End Connections: 1/8 to 1/2 in. (6 to 12mm) Working Pressure: Up to 3,000 psig (200 bar)

Plug Valves. PV Series.   End Connections: 1/8 to 1/2 in. (6 to 12mm) Working Pressure: Up to 3,000 psig (200 bar) Plug Valves PV Series Working Pressure: Up to,000 psig (00 bar) Temperature Range: -0 to 00 F (- to 0 C) Flow Coefficient: Up to 6. End Connections: /8 to / in. (6 to mm) Wide variety of end connection

More information

Integral-Bonnet Needle Valves

Integral-Bonnet Needle Valves Integral-Bonnet Needle Valves 18, 20, and 26 Series Live-loaded packing system Compact design Working pressures up to 6000 psig (413 bar) Temperatures up to 600 F (315 C) Integral-Bonnet Needle Valves

More information

Evans G-Series Integrated Gas Sticks

Evans G-Series Integrated Gas Sticks Evans G-Series Integrated Gas Sticks G-SERIES CFOS Stick Features Series CV GS 0.14 GM 1. GL 1.80 Working Pressure 0 psig (34.5 Bar) 0 psig (34.5 Bar) 0 psig (34.5 Bar) Operating Temperature - F to 1 F

More information

Check Valves (CO Series) Catalog 4130-CO Revised, June 2001

Check Valves (CO Series) Catalog 4130-CO Revised, June 2001 Check Valves (CO Series) Catalog 4130-CO Revised, June 2001 Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas

More information

pressure regulators Back Pressure Regulators

pressure regulators Back Pressure Regulators Back Pressure Regulators Index BP-3 Series 1 BP-6 Series 4 BP-8 Series 7 BP-8LF Series 10 CBP-3 Series 13 LB-1 Series 16 SBPR Series 19 BP-60 Series 22 BP-66 Series 25 GO Regulator 405 Centura Court PO

More information

VSO - MI thermally compensated proportional valve

VSO - MI thermally compensated proportional valve The VSO - MI is a miniature proportional valve specifically designed for medical device manufacturers and incorporates thermal compensation to provide precise flow control and stability over a wide operating

More information

SAMPLE CYLINDERS. Sample Cylinders & Accessories. Spun End Cylinders. Ultra-Seal Constant Pressure Cylinders. VP Series Cylinder Valves

SAMPLE CYLINDERS. Sample Cylinders & Accessories. Spun End Cylinders. Ultra-Seal Constant Pressure Cylinders. VP Series Cylinder Valves SAMPLE CYLINDERS T H E S O L U T I O N F O R G A S S A M P L E S T O R A G E Sample Cylinders & Accessories ISO 9001:2008 Certified Quality System Spun End Cylinders Ultra-Seal Constant Pressure Cylinders

More information

spun sampling cylinders

spun sampling cylinders HOKE Incorporated 405 Centura Court PO Box 4866 (29305) Spartanburg, SC 29303 Phone (864) 574-7966 Fax (864) 587-5608 www.hoke.com sales@hoke.com spun sampling cylinders 316 Stainless Steel DOT Series

More information

RL4 Series Relief Valve Introduction Parker RL4 Relief Valves are designed such that when the upstream pressure exceeds the closing force exerted by t

RL4 Series Relief Valve Introduction Parker RL4 Relief Valves are designed such that when the upstream pressure exceeds the closing force exerted by t Relief Valves (RL4 Series) Catalog 411-RL Revised, July 2001 RL4 Series Relief Valve Introduction Parker RL4 Relief Valves are designed such that when the upstream pressure exceeds the closing force exerted

More information

Recognized globally for our quality, service and the ability to deliver! ISO 9001: Quality Service Experience

Recognized globally for our quality, service and the ability to deliver! ISO 9001: Quality Service Experience Recognized globally for our quality, service and the ability to deliver! ISO 9001:2008 Quality Service Experience www.mac-weld.com CONTENTS Introduction Page 1-2 Needle Valves Page 3-6 Gauge Valves Page

More information

VC & VPC Series Check Valves

VC & VPC Series Check Valves VC & VPC Series Check Valves Up to 10 000psig (689 bar), Steel, and Brass Catalog No. VC-4 July 2015 Design VC and VPC Series Check Valves are designed to prevent reverse flow and keep the fluid in one

More information

fluid control Fluid Control Components Index

fluid control Fluid Control Components Index Fluid ontrol omponents Index VH Series 1 heck valves XVH Series 5 Excess flow valves 6100/6200 Series 13 heck valves 691F Series 16 heck valves R6000 Series 18 djustable relief valves 6600 Series 24 leed

More information

FLOW CONTROLLERS Instrument/Analyzer Products. Catalog 4513/USA April 2003

FLOW CONTROLLERS Instrument/Analyzer Products. Catalog 4513/USA April 2003 FLOW CONTROLLERS Instrument/Analyzer Products Catalog 4513/USA April 2003 FLOW CONTROLLERS Instrument/Analyzer Products Catalog 4513/USA April 2003 table of contents SC420 Series............. 1-2 SC423XL

More information

One-Piece Encapsulated Ball Valves

One-Piece Encapsulated Ball Valves One-Piece Encapsulated Ball Valves EB Series Working Pressure: up to 3000 psig (206 bar) End Connections: 1/16 to 3/4 in. (3 to 12 mm) Temperature Range: -65 to 300 F (-53 to 148 C) 2-way, Angle and 3-way

More information

Needle Valves. Catalog 1203/1205 Aug 2012

Needle Valves. Catalog 1203/1205 Aug 2012 Catalog 1203/1205 Aug 2012 Visual Index Click on link for desire page. At present image not available BAX-NVFF-01 FEMALE FEMALE Page 8 BAX-NVAMF-05 MALE FEMALE (ANGLE TYPE) Page 12 BAX-NVMFD-09 MALE -

More information

Ball Valves (B Series) Catalog 4121-B January 2006

Ball Valves (B Series) Catalog 4121-B January 2006 Ball Valves (B Series) Catalog 4121-B January 2006 B Series Ball Valves Catalog 4121-B Pressure vs. Temperature Pressure (psig) Temperature ( C) -54-18 10 38 66 93 121 149 177 204 232 6500 6000 448 414

More information

MANIFOLDS VALVE. Mfg & Exp. : Valves & Fittings. A Trusted Name in Valves and Fittings ISO 9001:2008 COMPANY. Catalogue No.

MANIFOLDS VALVE. Mfg & Exp. : Valves & Fittings. A Trusted Name in Valves and Fittings ISO 9001:2008 COMPANY. Catalogue No. A Trusted Name in Valves and Fittings Mfg & Exp. : Valves & Fittings MANIFOLDS VALVE ISO 9001:2008 COMPANY Pressure Ratings: 6,000 PSI/10,000 PSI NPT, ISO/BSP, Threads 2-,3- and 5-valves Instrument manifolds

More information

Bellows-Sealed Valves

Bellows-Sealed Valves www.swagelok.com ellows-sealed Valves Working pressures up to 1000 psig (68.9 bar) Temperatures up to 900 F (482 C) 1/4, 3/8, 1/2, and 3/4 in.; 6, 10, and 12 mm end connections rass, stainless steel, and

More information

Solution Partner. Leak - Proof Flow & Control. Check & Relief Valves. W e. s u p p o r t. t h e. i n n o v a t i o n s. o f.

Solution Partner. Leak - Proof Flow & Control. Check & Relief Valves. W e. s u p p o r t. t h e. i n n o v a t i o n s. o f. W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s Leak - Proof Flow & Control The Best Partner for Value Creation Solution Partner Check & Relief Valves 2 Check & Relief Valves Index

More information

INSTRUMENTATION ULTRA HIGH PURITY FITTINGS & VALVES

INSTRUMENTATION ULTRA HIGH PURITY FITTINGS & VALVES INSTRUMENTATION ULTRA HIGH PURITY FITTINGS & VALVES www.unilok.com Since 1984 INSTRUMENTATION Application VB1 series General Ball Valve MWP : 1000psig/69bar with PTFE seats, 2000psig/137bar with TFM seats

More information

EZ SERIES BOOSTER PUMPS

EZ SERIES BOOSTER PUMPS EZ SERIES BOOSTER PUMPS Cast Iron And Stainless Steel Booster Pumps Webtrol has been building Booster Pumps for over years for various industrial, commercial and agricultural uses and has long been a leader

More information

Miniature Proportional Valves Precision Fluidics

Miniature Proportional Valves Precision Fluidics Precision Fluidics 2 Electronic Pressure Control When you partner with the global leader in motion and control technologies, expect to move your business and the world forward. From miniature solenoid

More information

Be llows-se aled Valve s

Be llows-se aled Valve s www.swagelok.com Be llows-se aled Valve s BN Series Packless valves with all-metal seal to atmosphere Working pressures up to 500 psig (34.4 bar) Temperatures up to 200 F (93 C) 1/4 to 1/2 in. and 6 to

More information

"S" Series Needle/Gauge Valves

S Series Needle/Gauge Valves "S" Series Needle/Gauge Valves Autoclave Engineer s S Series needle and gauge valves have been engineered to provide reliable service and versatility in meeting specific process requirements. Valve heads

More information

BELLOWS VALVES. Microelectronics Product Line. Catalog 4506/USA October 2003

BELLOWS VALVES. Microelectronics Product Line. Catalog 4506/USA October 2003 BELLOWS VALVES Microelectronics Product Line Catalog 46/USA October 2003 BELLOWS VALVES Microelectronics Product Line Catalog 46/USA October 2003 table of contents Veriflo Division................... 1

More information

EVP SERIES PROPORTIONAL CONTROL VALVES

EVP SERIES PROPORTIONAL CONTROL VALVES EVP SERIES PROPORTIONAL CONTROL VALVES 207 Clippard is pleased to add the EVP series proportional control valve to our electronic product line. This product combines the features of the existing EV series

More information

Micro Valve. Quick, Sure Response with Design Adaptability. Features and Benefits. Applications. Dependable Performance SPECIFICATIONS / PARTS LIST

Micro Valve. Quick, Sure Response with Design Adaptability. Features and Benefits. Applications. Dependable Performance SPECIFICATIONS / PARTS LIST SPECIFICATIONS / PARTS LIST Micro Valve Bulletin SSIN064 Issue/Rev. 0.0 (2/18) Since its introduction in 1956, Micro Valve has provided successful service through thousands of applications. This makes

More information

Multi-Port Gauge Valves M5 and M51

Multi-Port Gauge Valves M5 and M51 Multi-Port Gauge Valves M5 and M51 M5 Product Overview The M5 and M51 are multi-port gauge valves allowing the versatile positioning of gauges or pressure switches without requiring additional penetration

More information

Ball Valves 2-Way Series

Ball Valves 2-Way Series Ball Valves 2-Way Series Pressures to 20,000 psi (1379 bar) Autoclave Engineers high-pressure ball valves have been designed to provide superior quality for maximum performance within a variety of valve

More information

Flow Control Valves Check Valves Gauge Control Valves. Colorflow Valves

Flow Control Valves Check Valves Gauge Control Valves. Colorflow Valves Check Valves Gauge Control Valves Colorflow Valves Colorflow and Ball Valves Industrial Flow Control, Check, Gauge Control Catalog HY14-3300/US Colorflow and Ball Valves Fully guided poppets are used on

More information

Type HSR Pressure Reducing Regulator for Residential, Commercial or Industrial Applications

Type HSR Pressure Reducing Regulator for Residential, Commercial or Industrial Applications Bulletin 71.1 D103087X012 Type HSR December 2017 Type HSR Pressure Reducing Regulator for Residential, Commercial or Industrial Applications High Capacity Compact Design P1524_1 High Capacity Internal

More information

Hose Length Custom Length Supply Line Options Ball Valve w/ PT UBY Strainer w/ PT and BDV

Hose Length Custom Length Supply Line Options Ball Valve w/ PT UBY Strainer w/ PT and BDV Model AC Circuit Sentry Automatic Balance Hose Kits - Submittal Hose Kit Size Flow Range *MFR Qty. 1/2".33-14 5 3/4".33-14 11 3/4" 5-50 11 1".33-14 20 1" 5-50 20 1-1/4" 5-50 30 **1-1/2" 5-50 44 **1-1/2"

More information

Evans SS-G & GXL -Series Integrated Stainless Gas Sticks

Evans SS-G & GXL -Series Integrated Stainless Gas Sticks SS-G & GXL -Series Integrated Stainless Gas Sticks Features G & GXL Series 316SS CF8M Body Construction Cleaned and packaged in cleanroom 2-PC Design G-series allows for isolation and removal of regulator

More information

Ball Valves 2-Way Series

Ball Valves 2-Way Series Ball Valves 2-Way Series Pressures to 20,000 psi (1379 bar) Autoclave Engineers high-pressure ball valves have been designed to provide superior quality for maximum performance within a variety of valve

More information

Product overview. Technical data

Product overview. Technical data VALVES & CONTROLS ANDERSON GREENWOOD BLANKETING SYSTEMS The Complete Blanketing and Safety Valve System! Product overview Pad Valves Anderson Greenwood is a world leader in tank protection and blanketing.

More information

Series 7100 Flow-Lift Piston Check Valve

Series 7100 Flow-Lift Piston Check Valve Series 7100 Flow-Lift Piston Check Valve Award-Winning Design: Feature-packed valve provides solutions for gas, air or liquid systems The Norriseal Series 7100 Piston Check Valve* is designed for the prevention

More information

Be llows-se aled Valve s

Be llows-se aled Valve s www.swagelok.com Be llows-se aled s B Working pressures up to 1000 psig (68.9 bar) Temperatures up to 900 F (482 C) 1/4, 3/8, 1/2, and 3/4 in.; 6, 10, and 12 mm end connections Brass, stainless steel,

More information

INSTRUCTION AND MAINTENANCE MANUAL FR95 PRESSURE REGULATOR

INSTRUCTION AND MAINTENANCE MANUAL FR95 PRESSURE REGULATOR Enidine / Conoflow 105 Commerce Way Westminster, SC 29693 Tel: (864) 647-9521 Fax: (864) 647-7993 WARNING Conoflow s products are designed and manufactured using materials and workmanship required to meet

More information

Tr unnion Ball Valve s

Tr unnion Ball Valve s www.swagelok.com Tr unnion Ball Valve s 83 Series and H83 Series Working pressures up to 10 000 psig (689 bar) 1/8 to 1/2 in. and 6 to 12 mm Swagelok tube fitting or NPT end connections 316 stainless steel

More information

Model 5400 / 5450 Control Valve

Model 5400 / 5450 Control Valve Model 5400 / 5450 Control Valve The Model 5400 (Figure ) and Model 5450 (Figure 2) control valves are designed to meet the high pressure and erosive applications common to the oil and gas industry. These

More information

Ultra High Pressure Valves, Fittings and Tubing Pressures to 152,000 psi

Ultra High Pressure Valves, Fittings and Tubing Pressures to 152,000 psi Ultra High Valves, Fittings and Tubing s to 152,000 psi MXIMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability,

More information

T205VB Series Tank Blanketing Vacuum Breakers

T205VB Series Tank Blanketing Vacuum Breakers February 2014 T205VB Series Tank Blanketing Vacuum Breakers Figure 1. Typical T205VB Series Vacuum Breaker Introduction The T205VB Series vacuum breakers (Figure 1) are used for precise control of small

More information

Richter Ball Control Valves Torque transmission free of play

Richter Ball Control Valves Torque transmission free of play Richter Ball Control Valves Torque transmission free of play ISO/DIN, ASME/ANSI Lining PFA, optionally PFA-P, PFA-HP, PFA-L k vs 0.1-400 ENVIPACK seal maintenance-free Heavy-duty ball control valves with

More information

Type HSR Pressure Reducing Regulator for Residential, Commercial, or Industrial Applications

Type HSR Pressure Reducing Regulator for Residential, Commercial, or Industrial Applications March 2013 Type HSR Pressure Reducing Regulator for Residential, Commercial, or Industrial Applications High Capacity Compact Design High Capacity Internal Relief TYPE HSR ANGLE BODY Globe Bodies Angle

More information

MODIFICATIONS AVAILABLE - MADE TO ORDER - CONSULT OUR FACTORY. (MINIMUM ORDER MAY BE REQUIRED.)

MODIFICATIONS AVAILABLE - MADE TO ORDER - CONSULT OUR FACTORY. (MINIMUM ORDER MAY BE REQUIRED.) NEEDLE VALVES - ANGLE & CROSS PATTERN Flow can be accurately controlled from full orifice opening to shut off. Fluid flow is readily visible through large sight window. Cross pattern can be used singularly

More information