SUBSEA VALVES

Size: px
Start display at page:

Download "SUBSEA VALVES"

Transcription

1 SUBSEA VALVES Fitok Subsea Valves are manufactured with some notable differences to standard models to help ensure effective fluid transfer for the Oil and Gas Industry. Valves within the range include ball type in various different configurations. As well as Subsea check and needle valve to pressures up to 20,000 psi (100 bar). Matching pipe fittings and tube are also available to complement this range. They are suitable for water depths of up to,200m and high temperatures. NACE MR0175 compliance and H2S Sour Gas suitability is available.

2 SUBSEA BALL VALVES SUBSEA BALL VALVES FEATURES Rapid quarter turn action provides quick open/close for easy ROV or diver operation One-piece,trunnion mounted style,ideal for severe service duty application 2-way and -way valve configurations available PEEK seats to offer excellent resistance against chemicals,heat and abrasion Full-port flow path to minimize pressure drop 16 cold-worked stainless steel construction NBR O-rings for temperatrue from 0 F to 250 F (-18 C to 121 C) Wide selection of tube and pipe end fittings available NACE MR0175 compliant Different wetted material optional TECHNICAL DATA Maximum working pressure: 20,000 psig (1,79 bar) Working temperature: 0 F to 250 F (-18 C to 121 C) Maximum water depth: 1,800 ft (,200 meters) Maximum external pressure: 6,000 psig (1 bar) STANDARD MATERIALS OF CONSTRUCTION 2-way Straight Valves Item Component Material Grade 1 Ball Stem 16 SS / A79 2 Packing Gland 16 SS / A79 Locking Piece 16 SS / A276 Valve Body 16 SS / A79 5 O-Ring NBR 6 Thrust Washer C6000 / B150 7 O-Ring NBR 8 Lock Nut 16 SS / A276 9 Seat Gland 16 SS / A79 10 Locking Piece 16 SS / A Bottom Gland 16 SS / A79 12 Bottom Thrust Washer C6000 / B150 1 Bearing PEEK 1 Seat PEEK 15 O-Ring NBR 16 Seat Retainer 16 SS / A79 - Lubricant Molybdenum Disulfide / Fluorinated-based 2

3 SUBSEA BALL VALVES -way Straight Valves SUBSEA BALL VALVES Item Component Material Grade 1 Ball Stem 16 SS / A79 2 Packing Gland 16 SS / A79 Locking Piece 16 SS / A276 Valve Body 16 SS / A79 5 O-Ring NBR 6 Thrust Washer C6000 / B150 7 O-Ring NBR 8 Lock Nut 16 SS / A276 9 Seat Gland 16 SS / A79 10 Bearing C6000 / B Seat Retainer 16 SS / A79 12 Seat Carbon Filled PEEK 1 O-Ring NBR 1 Belleville Washers 16SS / A O-Ring NBR 16 Belleville Washers 17-7PH / A69 - Lubricant Molybdenum Disulfide / Fluorinated-based

4 SUBSEA BALL VALVES SUBSEA BALL VALVES -way Straight Valves Body Style 2-way -way Orifice No A B C D E F G H J M Block Thickness.1 (10.9) 5.78 (16.8) 6. (16.5). (110.2) 5.09 (129.) 5.9 (150.8).18 (106.) 5.5 (10.) 7.7 (196.).72 (119.9) 5.7 (15.8) 7.77 (197.) 2 (50.8).1 (10.8) (10.9) 2.5 (6.2).28 (8.) (101.6) 2.56 (65).0 (77).62 (91.9) 1.78 (5.2) 2.08 (52.8) 1.6 (1.) 2 (50.8) (50.8) 1.25 (1.75) 1.25 (1.75) 1 (25.) 0. (10.9) 0.1 (10.) 0.5 (12.7) 0.1 (10.) 0.1 (10.) 0.5 (12.7) 0.1 (7.7) 0.76 (19.2) 0.88 (22.) 1.8 (5.8) 1.28 (2.5) 1.79 (5.5) 1 (25.) (.9) 1.75 (.5) 1 (25.) (.9) 1.75 (.5) BALL VALVE PANEL MOUNTING DIMENSIONS Body Style 2-way -way Orifice No A B C D (50.8) (19.1) 1.25 (1.75) 1.25 (1.75) 1 (25.) 1.06 (26.9) 1.88 (7.6) 1.88 (7.6) 1.88 (7.6) 1.88 (7.6) All dimensions are for reference only and are subject to change.

5 SUBSEA BALL VALVES FLOW CONFIGURATION 2-Way Straight Valves SUBSEA BALL VALVES -Way Valves Shut-Off Closed Open Switching 180 Turn Left Open Closed Right Open Diverting 90 Turn Left Open Right Open 5

6 SUBSEA BALL VALVES SUBSEA BALL VALVES PART NUMBER DESCRIPTION # 10SBSS-FH8--1 Body Style Connection Type Orifice No. Orifice Size Rated Cv FH (6.5) 1 10SBSS-FH8-6-1 FH (9.52).51 2-way 10SBSS-FNS FH (12.7) SBSS-FNS FH (12.7) SBSS-FH SBSS-FH8-6-2D 10SBSS-2FH SBSS-2FH6-6-2D 10SBSS-2FH SBSS-2FH9-6-2D 10SBSS-2FH SBSS-2FH12-6-2D 10SBSS-FNS SBSS-FNS-6-2D 10SBSS-FNS SBSS-FNS6-6-2D 10SBSS-FNS SBSS-FNS8-6-2D 10SBSS-2FH SBSS-2FH12-8-2D 10SBSS-2FH SBSS-2FH16-8-2D 10SBSS-2FH SBSS-2FH12-8-2D 10SBSS-2FH SBSS-2FH16-8-2D 15SBSS-FH2--1 -way FH (8,) 2.1 2FH (5.16) FH (7.92) 1.9 2FH (8.) 2.1 FNS 0.28 (8.) 2.1 FNS (8.) 2.1 FNS (8.) 2.1 2FH (12.7). 2FH (12.7). FH (12.7). FNS (12.7). FH (2.9) SBSS-FH--1 FH (.25) SBSS-FH6--1 FH (6.5) 1 15SBSS-FNS2--1 FNS (6.5) 1 15SBSS-FNS--1 FNS 0.25 (6.5) 1 2-way 15SBSS-FNS6--1 FNS (6.5) 1 15SBSS-FNS8--1 FNS (6.5) 1 15SBSS-FNS-6-1 FNS 0.75 (9.52).51 15SBSS-FNS6-6-1 FNS (9.52).51 15SBSS-FNS8-6-1 FNS (9.52).51 15SBSS-FNS--2 15SBSS-FNS--2D 15SBSS-FNS SBSS-FNS6--2D 20SBSS-2FH--1 -way FNS (.77) 0.50 FNS (.77) FH (2.77) SBSS-2FH6--1 2FH (5.16) SBSS-2FH9--1 2FH (6.5) 1 20SBSS-6FH--1 6FH 0.09 (2.9) SBSS-6FH way 6FH (.17) SBSS-6FH9--1 6FH (.77) SBSS-2FH FH (5.16) SBSS-2FH FH (7.92) SBSS-2FH FH (9.52).51 Pressure / Temperature Rating psig (bar) at Room Temperature 10,000 (690) 15,000 (1,0) 20,000 (1,79) 6

7 SUBSEA BALL VALVES # 20SBSS-2FH--2 20SBSS-2FH--2D 20SBSS-2FH SBSS-2FH6--2D 20SBSS-2FH SBSS-2FH9--2D 20SBSS-6FH--2 20SBSS-6FH--2D 20SBSS-6FH SBSS-6FH6--2D Body Style -way Connection Type 2FH Orifice No. Orifice Size Rated Cv (2.9) FH (.77) 0.5 2FH (.77) 0.5 6FH 0.09 (2.9) 0.1 6FH (.17) 0.22 Pressure / Temperature Rating psig (bar) at Room Temperature 20,000 (1,79) SUBSEA BALL VALVES 15SB SS - 2FH SERIES BODY MATERIAL CONNECTION SIZE ORIFICE NO. BODY STYLE 10SB SS 16 SS For 10SB Series 2 1/8 For 2-way 1 2-Way Straight Valves 15SB FH 15 Series 1/ 1/ 2 -Way Valves, 180 Turn 20SB 2FH 20 Series 6 /8 6 /8 2D -Way Valves, 90 Turn FNS NPT (Female) 8 1/2 8 1/2 For 15SB Series 9 9/16 For -way FH 15 Series 12 / /16 2FH 20 Series /8 FNS NPT (Female) 8 1/2 For 20SB Series 2FH 6FH 20 Series 60 Series NB: Most configurations are available but not all. 7

8 SUBSEA CHECK VALVES SUBSEA CHECK VALVES FEATURES Provides unidirectional flow and tight shut-off for liquids and gas with high reliability. When differential drops below cracking pressure, valve shuts off (Not for use as relief valve) Soft seat seal ring style or metal to metal seat poppet style available PTFE seat to offer excellent resistance against harsh chemicals 16 cold-worked stainless steel construction NACE MR0175 compliant TECHNICAL DATA Maximum working pressure: 20,000 psig (1,79 bar) Working temperature: -20 F to 250 F (-29 C to 121 C) Maximum water depth: 1,800 ft (,200 meters) Maximum external pressure: 6,000 psig (1 bar) Cracking pressure: 1 psig~26 psig (0.966 bar~1.79 bar) STANDARD MATERIALS OF CONSTRUCTION SC Series Item Component Material Grade 1 Cover Gland 16 / A79 2 Seal Ring HNBR Seal Ring HNBR Cover 16 / A79 5 Seal Ring Wide Selection of O-Rings Available 6 Ball Poppet 16 / A79 7 Spring 00 SS 8 Valve Body 16 / A79 SCO Series Item Component Material Grade 1 Cover Gland 16 / A79 2 Seal Ring HNBR Seal Ring HNBR Cover 16 / A79 5 Ball Poppet 16 / A79 6 Spring 00 SS 7 Valve Body 16 / A79 8

9 SUBSEA CHECK VALVES TECHNICAL DATA & DIMENSIONS # Connection Type 10SCSS-FNS12 10SCSS-FNS16 10SCOSS-FNS12 10SCOSS-FNS16 15SCSS-FH 15SCSS-FH6 15SCSS-FH8 15SCOSS-FH 15SCOSS-FH6 15SCOSS-FH8 15SCSS-FNS 15SCSS-FNS6 15SCSS-FNS8 15SCOSS-FNS 15SCOSS-FNS6 15SCOSS-FNS8 20SCSS-2FH 20SCSS-2FH6 20SCSS-2FH9 20SCSS-2FH12 20SCSS-2FH16 20SCOSS-2FH 20SCOSS-2FH6 20SCOSS-2FH9 20SCOSS-2FH12 20SCOSS-2FH16 FNS12 FNS16 FNS12 FNS16 FH FH6 FH8 FH FH6 FH8 FHS FHS6 FHS8 FNS FNS6 FNS8 2FH 2FH6 2FH9 2FH12 2FH16 2FH 2FH6 2FH9 2FH12 2FH16 Orifice Size 0.52 (1.21) 0.69 (17.5) 0.52 (1.21) 0.69 (17.5) (.78) (6.5) 0.75 (9.5) (.78) (6.5) 0.75 (9.5) 0.12 (.05) 0.22 (5.59) 0.6 (9.12) 0.12 (.05) 0.22 (5.59) 0.6 (9.12) (.18) (5.5) 0.59 (9.12) (1.11) (17.8) (.18) (5.5) 0.59 (9.12) (1.11) (17.8) Rated Cv A B C-HEX HEX Pressure / Temperature Rating psig (bar) at Room Temperature 6.29 (159.77) 7. (186.18) 6.29 (159.77) 7. (186.18).18 (80.77).56 (90.2).18 (106.17).18 (80.77).56 (90.2).18 (106.17).7 (85.60).95 (100.) 5.6 (16.1).7 (85.60).95 (100.) 5.6 (16.1) 2.9 (7.68).12 (79.25).18 (106.17) 5.50 (19.70) 6.6 (168.0) 2.9 (7.68).12 (79.25).18 (106.17) 5.50 (19.70) 6.6 (168.0) 0. (11.18) 0.5 (1.6) 0.5 (1.6) 0. (11.18) 0.5 (1.6) 0.5 (1.6) 0.6 (16.00) 0.9 (2.62) 0.6 (16.00) 0.9 (2.62) 0.8 (9.65) 0.7 (11.9) 0.5 (1.6) 0.62 (15.75) 0.72 (18.29) 0.8 (9.65) 0.7 (11.9) 0.5 (1.6) 0.62 (15.75) 0.72 (18.29) 0.50 (12.70) 0.62 (15.75) (2.81) 1.19 (0.2) 0.50 (12.70) 0.62 (15.75) (2.81) 1.19 (0.2) 1.75 (.5) 1.88 (7.75) 1.75 (.5) 1.88 (7.75) 0.81 (20.57) 1.00 (25.0) 0.81 (20.57) 1.00 (25.0) (2.81) 1.1 (28.58) (2.81) 1.1 (28.58) 0.81 (20.57) 1.00 (25.0) 1.75 (.5) 2.12 (5.85) 0.81 (20.57) 1.00 (25.0) 1.75 (.5) 2.12 (5.85) 10,000 (690) 15,000 (1,0) 20,000 (1,79) SUBSEA CHECK VALVES 9

10 SUBSEA CHECK VALVES SUBSEA CHECK VALVES PART NUMBER DESCRIPTION 15SC SS - FH SERIES BODY MATERIAL CONNECTION TYPE 10SC SS 16 SS For 10SC / 10SCO Series 10SCO FNS NPT (Female) 15SC For 15SC / 15SCO Series 15SCO FH 15 Series 20SC FNS NPT (Female) 20SCO For 20SC / 20SCO Series 2FH 20 Series SIZE 1/ 6 /8 8 1/2 9 9/16 12 / 16 1 NB: Most configurations are available but not all. 10

11 SUBSEA NEEDLE VALVES FEATURES Non-rotating, non-rising stem to ensure positive non-galling operation when shut-off Standard stem seal material: Glass filled PTFE Packing is under the threads of valve stem Metal-to-metal seating to ensure ideal shut-off, longer stem/seat service lifetime for abrasive flow, excellent corrosion resistance and greater durability for repeated on/off cycles Reliable locking device of packing gland Wide selection of tube and pipe end fittings available 2-way straight and 2-way angle available for flow pattern 16 cold-worked stainless steel construction NACE MR0175 compliant SUBSEA NEEDLE VALVES TECHNICAL DATA Orifice: 0.20 Rated CV: Maximum working pressure: 20,000 psig (1,79 bar) Working temperature: 0 F to 250 F (-18 C to 121 C) Maximum water depth: 1,800 ft (,200 meters) Maximum external pressure: 6,000 psig (1 bar) STANDARD MATERIALS OF CONSTRUCTION 2-way Straight 2-way Angle Item Component Material Grade 1 Handle SS 2 Handle Screw SS Upper Stem 16 SS / A79 Packing Gland 16 SS / A79 5 O-Ring NBR 6 Lower Stem Alloy Packing Ring C6000 / B150 8 Packing PTFE / RPTFE 9 Packing Washer Alloy Body 16 SS / A79 - Lubricant Molybdenum Disulfide 11

12 SUBSEA NEEDLE VALVES SUBSEA NEEDLE VALVES DIMENSIONS 2-way Straight 2-way Angle # Connection Type 20SNSS-2FH6-1 20SNSS-2FH9-1 20SNSS-2FH SNSS-2FH6-2 20SNSS-2FH9-2 20SNSS-2FH12-2 2FH6 2FH9 2FH12 2FH6 2FH9 2FH12 A B C D E F G L Block Thickness 6.15 (156.2) 6.15 (156.2) 7.22 (18.) 6.65 (168.9) 6.65 (168.9) 7.72 (196.1).00 (101.6).00 (101.6) (260.).00 (101.6).00 (101.6) (260.).25 (82.55).25 (82.55).12 (10.7).75 (95.25).75 (95.25).62 (117.) 2.75 (69.9) 2.75 (69.9). (87.8) (61.98) 2. (61.98) 2.9 (7.68) 2. (61.98) 2. (61.98) 2.9 (7.68) (2.88) (2.88) (2.88) (2.88) (2.88) (2.88)

13 SUBSEA NEEDLE VALVES SUBSEA HYDRAULIC NEEDLE VALVE Item Component Material Grade 1 Gland 16 SS / A79 2 Actuator Body 16 SS / A79 Piston Rod 16 SS / A79 O-Ring Fluorocarbon FKM 5 Piston Seal UHMWPE 6 Support Block 16 SS / A79 7 Nut Stainless Steel 8 Upper Stem 16 SS / A79 9 Packing Gland 16 SS / A79 10 Locking Screw SS 11 O-Ring HNBR 12 O-Ring Retainer PTFE 1 Lower Stem S1700 / A56 1 Packing Ring C6000 / B Packing PTFE 16 Packing Washer S1700 / A56 17 Body 16 SS / A79 SUBSEA NEEDLE VALVES PART NUMBER DESCRIPTION 20SN SS - 2FH6 - R 2 - H SERIES BODY MATERIAL CONNECTION TYPE STEM TIPS FLOW PATTERNS CONTROL PATTERNS 15SN SS 16 SS For 15SN Series Vee 1 Straight None 20SN FH 1/ R Regulating 2 Angle H Hydraulic FH6 /8 FNS FNS6 FNS8 1/ NPT (Female) /8 NPT (Female) 1/2 NPT (Female) For 20SN Series 2FH6 /8 2FH9 9/16 2FH12 / NB: Most configurations are available but not all. 1

Delivering Peak Performance. High-pressure liquid and gas flow control solutions for the oil and gas industry s harshest environments

Delivering Peak Performance. High-pressure liquid and gas flow control solutions for the oil and gas industry s harshest environments Delivering Peak Performance High-pressure liquid and gas flow control solutions for the oil and gas industry s harshest environments A leading brand of high pressure valves, tubing, fittings and accessories,

More information

Products for the Oil & Gas Industry

Products for the Oil & Gas Industry Products for the Oil & Gas Industry BuTech a leading brand of high pressure valves, tubing, fittings and accessories, takes a proactive stance on the design, development and production of new and existing

More information

High-Pressure Needle Valves

High-Pressure Needle Valves www.swagelok.com High-Pressure Needle Valves Working pressures up to 4 000 psig (3100 bar) Temperatures up to 40 F (232 C) Weep holes for leak detection Packing below stem threads Nonrotating stem design

More information

Oil and Gas Products Pressures to 30,000 psi

Oil and Gas Products Pressures to 30,000 psi Oil and Gas Products MAXIMATOR has been designing and manufacturing specialty products to the high pressure market for over thirty years and has a worldwide reputation for quality and reliability. Oil

More information

Medium and High Pressure Product Presentation

Medium and High Pressure Product Presentation Medium and High Pressure Product Presentation www.fitokgroup.com 2016 1 Contents 1. Applications 2. Medium and High Pressure Fittings 3. Tubing 4. Medium and High Pressure Valves 5. Filters 6. Quick Couplings

More information

VN Series Needle Valves

VN Series Needle Valves VN Series Needle Valves VN5, VN6, and VNS6 Series Regulating and Shut-Off Applications Catalog No. VN-2 January 2015 VN5 Series Integral-Bonnet Needle Valves VN6 Series Bar-Stock Needle Valves VNS6 & VNS10

More information

Solution Partner. Leak - Proof Flow & Control. Check & Relief Valves. W e. s u p p o r t. t h e. i n n o v a t i o n s. o f.

Solution Partner. Leak - Proof Flow & Control. Check & Relief Valves. W e. s u p p o r t. t h e. i n n o v a t i o n s. o f. W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s eak - Proof Flow & Control The Best Partner for Value Creation Solution Partner Check & Relief Valves Index Check & Relief Valves

More information

Special Alloy Ball Valves

Special Alloy Ball Valves www.swagelok.com Special Alloy Ball Valves 60 Series 3/8 to 1 in. sizes Alloy 625, alloy 825, alloy 2507 super duplex stainless steel, and 6-moly materials On-off (2-way) valves Compensating seat design

More information

Medium-Pressure Ball Valves

Medium-Pressure Ball Valves www.swagelok.com Medium-Pressure Ball Valves FKB Series Innovative stem and end connection seal design (patent-pending): maintains full pressure rating throughout the entire operating temperature range

More information

Be llows-se aled Valve s

Be llows-se aled Valve s www.swagelok.com Be llows-se aled Valve s U Secondary containment system above the bellows Working pressures up to 2500 psig (172 bar) Temperatures up to 1200 F (648 C) 1/4, 3/8, 1/2, 3/4, and 1 in.; 6,

More information

Medium-Pressure Ball Valves

Medium-Pressure Ball Valves www.swagelok.com Medium-Pressure Ball Valves FKB Series Innovative stem seal design (patent-pending): maintains full pressure rating throughout the entire operating temperature range Bottom-loaded stem

More information

Solution Partner. Leak - Proof Flow & Control. Manifold & Gauge & Rising Plug Valves. W e. s u p p o r t. t h e

Solution Partner. Leak - Proof Flow & Control. Manifold & Gauge & Rising Plug Valves. W e. s u p p o r t. t h e W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s Leak - Proof Flow & Control The Best Partner for Value Creation Solution Partner Manifold & Gauge & Rising Plug Valves 2 Manifold

More information

One-Piece Ball Valves. VB2GB, VB23GB Series

One-Piece Ball Valves. VB2GB, VB23GB Series One-Piece Ball Valves VB2 & VB2G Series 1/8 to 1/2 in. (3 to 12 mm OD) Up to 3000 psig (206 bar) Stainless Steel, Brass Catalog No. VB2-2 Aug. 2015 Features Directional Handle indicates flow direction.

More information

S, M, L, and 31 Series. Straight-pattern flow coefficients (C v ) from to Low- and high-pressure service

S, M, L, and 31 Series.  Straight-pattern flow coefficients (C v ) from to Low- and high-pressure service www.swagelok.com Metering Valves S, M, L, and Straight-pattern flow coefficients (C v ) from 0.004 to 0.16 Low- and high-pressure service Repeatable vernier handles available rass and 316 stainless steel

More information

Integral-Bonnet Needle Valves

Integral-Bonnet Needle Valves Integral-Bonnet Needle Valves 18, 20, and 26 Series Live-loaded packing system Compact design Working pressures up to 6000 psig (413 bar) Temperatures up to 600 F (315 C) Integral-Bonnet Needle Valves

More information

Hexagonal Bar Stock Needle Valve

Hexagonal Bar Stock Needle Valve Hexagonal Bar Stock Needle Valve HBNV Series Features Maximum working pressure: 6000 psi (414bar) at 100 F (38 C) 10000 psi (690bar) at 100 F (38 C) Working temperature: -65 F (-54 C) to 464 F (240 C)

More information

Parker Autoclave Engineers: Fluid Components Product Catalog. February Valves, Fittings and Tubing. Pressures to 150,000 psi (10,000 bar)

Parker Autoclave Engineers: Fluid Components Product Catalog. February Valves, Fittings and Tubing. Pressures to 150,000 psi (10,000 bar) Parker Autoclave Engineers: Fluid Components Product Catalog February 2013 Valves, Fittings and Tubing Pressures to 150,000 psi (10,000 bar) Ball Valves Subsea Series Internal Pressures to 20,000 psi (1379

More information

INSTRUMENTATION UNION BONNET VALVES. VU6 Series.

INSTRUMENTATION UNION BONNET VALVES. VU6 Series. INSTRUMENTATION UNION BONNET VALVES VU6 Series www.unilok.com Features Pressure rating up to 6000psig (413bar) @38 (100 ) Temperature rating from -53 (-65 ) to 232 (450 ) with standard PTFE packing, up

More information

Solution Partner. Leak - Proof Flow & Control. Check & Relief Valves. W e. s u p p o r t. t h e. i n n o v a t i o n s. o f.

Solution Partner. Leak - Proof Flow & Control. Check & Relief Valves. W e. s u p p o r t. t h e. i n n o v a t i o n s. o f. W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s Leak - Proof Flow & Control The Best Partner for Value Creation Solution Partner Check & Relief Valves 2 Check & Relief Valves Index

More information

Medium-Pressure Ball Valves

Medium-Pressure Ball Valves www.swagelok.com Medium-Pressure Ball Valves FKB Series Innovative stem and end connection seal design (patent-pending): maintains full pressure rating throughout the entire operating temperature range

More information

Screwed Bonnet Needle Valves. Needle Valves

Screwed Bonnet Needle Valves. Needle Valves 89 Design & Features Hard (Vee) or Delrin Soft Seat/Tip Orifice sizes from.172 to.438 in. Flow Coefficients (Cv) from.37 to 2.7 Straight or angle flow patterns Optional panel mount Handle options available

More information

Ball Valves. Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ Stainless Steel Technical Data 2160 PSI ¼

Ball Valves. Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ Stainless Steel Technical Data 2160 PSI ¼ Ball Valves Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ - 4...3 316 Stainless Steel Technical Data 2160 PSI ¼ - 4...3 Style BVSC...4 Carbon Steel Technical Data 2200 PSI ¼ - 2...5

More information

Pressure Regulators RHPS Series

Pressure Regulators RHPS Series Pressure Regulators Series 1 www.swagelok.com Pressure Regulators Series Pressure-reducing models Back-pressure models Spring-, dome-, and air-loaded 1/4 to 4 in. end connections Working pressures up to

More information

Anderson Greenwood M4TL Liquid Level Manifolds

Anderson Greenwood M4TL Liquid Level Manifolds A single-flanged, two-valve manifold consisting of two block valves with no equalizer passage suitable for pressures up to 6000 psig (414 barg) Features General application The manifold is designed for

More information

Check Valves. C, CA, CH, CP, and CPA Series. Working pressures up to 6000 psig (413 bar) Adjustable and fixed cracking pressures

Check Valves. C, CA, CH, CP, and CPA Series.  Working pressures up to 6000 psig (413 bar) Adjustable and fixed cracking pressures www.swagelok.com Check Valves C, CA, CH, CP, and CPA Series Working pressures up to 6000 psig (413 bar) Adjustable and fixed cracking pressures Variety of end connections 316 stainless steel and brass

More information

QSS: Quick Set System. Product Catalog Compression Sleeve Valves and Fittings to 15,000 psi (1034 bar)

QSS: Quick Set System. Product Catalog Compression Sleeve Valves and Fittings to 15,000 psi (1034 bar) QSS: Quick Set System Product Catalog Compression Sleeve Valves and Fittings to psi (1034 bar) Section Page Introduction.............................. 2 QS Needle Valves........................... 4 QS

More information

O-Rings. Back pressure may be required to reseal the valves with nominal cracking pressure of 5psi or lower.

O-Rings. Back pressure may be required to reseal the valves with nominal cracking pressure of 5psi or lower. Check Valves SPCV Series Features Fixed cracking pressure. Pressure rating up to 3000 psig @70 (21 ) Temperature rating up to 375 (191 ) with Viton O-Ring. Variety of end connections available. Every valve

More information

Gauge Valves and Instrumentation Manifolds

Gauge Valves and Instrumentation Manifolds Gauge Valves and ation Manifolds GV, GR Series 2-valve, 3-valve and 5-valve Manifold Series Nantong Naco Fluid Equipment Co.,LTD Pingchao Town, Tongzhou rea, Nantong City, jiangsu Province, China Tel:86-53-85400443

More information

Ball Valves 2-Way Series

Ball Valves 2-Way Series Ball Valves 2-Way Series Pressures to 20,000 psi (1379 bar) Autoclave Engineers high-pressure ball valves have been designed to provide superior quality for maximum performance within a variety of valve

More information

FLANGED SERIES 1 PIECE FLANGED STANDARD PORT RF15 - ASME Class 150 RF30 - ASME Class 300 FLANGED SERIES RF15/RF30

FLANGED SERIES 1 PIECE FLANGED STANDARD PORT RF15 - ASME Class 150 RF30 - ASME Class 300 FLANGED SERIES RF15/RF30 FLANGED SERIES 1 PIECE FLANGED STANDARD PORT 1-12 RF15 - ASME Class 150 RF30 - ASME Class 300 1 R F 1 5 / R F 3 0 F L A N G E D S E R I E S B A L L VA LV E S Flow-Tek s Series RF15 and RF30 Ball Valves

More information

Locked Bonnet Needle Valves

Locked Bonnet Needle Valves Locked Bonnet Needle Valves Series Working Pressures up to 6000 psig (413 bar) Temperature Range from -65 to 1200 F (- 53 C to 648 C) Flow Coefficients up to 2.18 Locked bonnet eliminates accidental disassembly

More information

Instrument Manifolds. V, VB, and VL Series. 2-, 3-, and 5-valve instrument manifolds

Instrument Manifolds. V, VB, and VL Series.  2-, 3-, and 5-valve instrument manifolds www.swagelok.com Manifolds V, VB, and VL Series 2-, 3-, and 5- instrument manifolds All 316 stainless steel construction with PTFE packing Working pressures up to 6000 psig (413 bar) Temperatures up to

More information

Ball Valves 2-Way Series

Ball Valves 2-Way Series Ball Valves 2-Way Series Pressures to 20,000 psi (1379 bar) Autoclave Engineers high-pressure ball valves have been designed to provide superior quality for maximum performance within a variety of valve

More information

Needle Valves B

Needle Valves B Subsea Needle Valves Description Detail MAWP Orifice CV Barrior Body Stem O-Ring Connection Actuator Length Width Height Hydrostatic Test Pressure Max Torque on Stem B-4957-01 Sub-Sea Needle Valve -way

More information

Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends

Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends SPECIFICATION See our full range online at: www.vip-ltd.co.uk Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends VIP Product Codes 04/0466 (BSP)

More information

Check valve series. SHCV, SOCV, SOACV, SACV Series. Phone: Fax: Wimbledon Rd.

Check valve series. SHCV, SOCV, SOACV, SACV Series.  Phone: Fax: Wimbledon Rd. Check valve series SHCV, SOCV, SOACV, SACV HIGH PRESSURE CHECK VALVES SHCV SERIES Features Pressure rating up to 6,000psig(413bar) at 70 (20 ) Temperature rating up to 375 (190 ) with viton seal standard

More information

Pneumatic and Electronic Motion Control Distributor AIROYAL COMPANY airoyalcompany.net Ph: Fax:

Pneumatic and Electronic Motion Control Distributor AIROYAL COMPANY airoyalcompany.net Ph: Fax: COMPANY Pneumatic and Electronic Motion Control Distributor AIROYAL COMPANY airoyalcompany.net Ph: 973-761-4150 Fax: 973-761-5731 Quick Valves Disconnect Table of Contents Index Table of Contents Ball

More information

Gauge Valves and Instrumentation Manifolds

Gauge Valves and Instrumentation Manifolds Gauge Valves and ation Manifolds GV, GVH, GR Series 2-valve, 3-valve and 5-valve Manifold Series FITOK Group FITOK GmbH (Headquarter) Sprendlinger Landstr. 5, 6369 Offenbach am Main, Germany Tel.: +49

More information

VC & VPC Series Check Valves

VC & VPC Series Check Valves VC & VPC Series Check Valves Up to 10 000psig (689 bar), Steel, and Brass Catalog No. VC-4 July 2015 Design VC and VPC Series Check Valves are designed to prevent reverse flow and keep the fluid in one

More information

Triad Series. 3 Piece Ball Valves Full Port: 1 /4-4 Standard Port: 3 /4-2 1 /2. Model FP - Full Port Model SP - Standard

Triad Series. 3 Piece Ball Valves Full Port: 1 /4-4 Standard Port: 3 /4-2 1 /2. Model FP - Full Port Model SP - Standard A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. 3 Piece Ball Valves Full Port: 1 / - Standard Port: 3 / - 1 / Triad Series Model FP - Full Port Model SP - Standard Port Flow-Tek

More information

V33, VP33, VA33, VDA33, VH36 and VL36 Series for VCH36 Series for CNG/NGV applications Pressures up to 3,000 psig (206 bar) and 6,000 psig (413 bar)

V33, VP33, VA33, VDA33, VH36 and VL36 Series for VCH36 Series for CNG/NGV applications Pressures up to 3,000 psig (206 bar) and 6,000 psig (413 bar) Valves Check Valves V33, VP33, VA33, VDA33, VH36 and VL36 Series for VCH36 Series for CNG/NGV applications Pressures up to 3,000 psig (206 bar) and 6,000 psig (413 bar) No.V336-9 November 2014 Fixed cracking

More information

Trunnion Mounted Ball Valves

Trunnion Mounted Ball Valves Trunnion Mounted Ball Valves CONTENTS Product Coding for KITZ Trunnion Mounted Ball Valves 2 Soft seated 2 Metal seated 2 Soft Seated 3-Piece Body Trunnion Mounted Ball Valves T60S Series (1) 3 Component

More information

BV Series. Threaded Industrial Control Ball Valves 2 Way 1/2-4. Increased Linear Response. Flow Curve Chart

BV Series. Threaded Industrial Control Ball Valves 2 Way 1/2-4. Increased Linear Response. Flow Curve Chart The BV Series Threaded Industrial Ball Valve product line is ideally suited to high temperature and high pressure water or steam as well as a wide range of heavy commercial HVAC control applications. These

More information

TY-FLO 3 Piece Ball Valves

TY-FLO 3 Piece Ball Valves TY-FLO 3 Piece Ball Valves 3 PIECE BALL VALVES TY-FLO 3 Piece Ball Valves D 1 ASME B16.34 Compliant FeaTUreS 3-Piece, 8-Bolt construction provides superior high pressure performance and ASME B16.34 compliance

More information

Manifold and Isolation Valve Mounting System for Direct Mounting DP Transmitters

Manifold and Isolation Valve Mounting System for Direct Mounting DP Transmitters ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS for Direct Mounting DP Transmitters Introduction The Anderson Greenwood SaddleMount has been developed to overcome the problems associated with traditional transmitter/manifold

More information

Solution Partner. Leak - Proof. Flow & Control. Ball Valves SBV10 SBV30 SBV60 SFBV60. W e. s u p p o r t. t h e

Solution Partner. Leak - Proof. Flow & Control. Ball Valves SBV10 SBV30 SBV60 SFBV60. W e. s u p p o r t. t h e W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s Leak - Proof The Best Partner Flow & Control Solution Partner for Value Creation Ball Valves SBV SBV30 SBV60 SFBV60 SBVSeries For

More information

Swing - Out Ball Valves. High Technology Valve & Fitting Series

Swing - Out Ball Valves. High Technology Valve & Fitting Series Swing - Out Ball Valves High Technology Valve & Fitting SWB 30 SERIES SPECIFICATION Pressure Rating up to 000 psig (9 bar) at 00 (37 ) Temperature Range from -0 (- ) to 50 (3 ) TESTING Each valve is tested

More information

Anderson Greenwood M1/M110 Differential Pressure Manifolds

Anderson Greenwood M1/M110 Differential Pressure Manifolds A 3-valve differential pressure manifold with integral metal seats or replaceable, roddable soft seats for applications requiring remote mounting from the instrument Features General application The M1

More information

BVM Series Flanged Industrial Control Ball Valves 2 Way 2-1/2-12

BVM Series Flanged Industrial Control Ball Valves 2 Way 2-1/2-12 The BVM Series of Flanged Industrial Ball Valves are ideally suited to a wide range of steam and water applications that require a high degree of rangeability. These valves provide exceptional characterized

More information

SVF FLOW CONTROLS. Series # Flanged Standard Port Fire Safe / API th Edition. Performance Engineered I N C O R P O R A T E D

SVF FLOW CONTROLS. Series # Flanged Standard Port Fire Safe / API th Edition. Performance Engineered I N C O R P O R A T E D Series 41 150# Flanged Standard Port Fire Safe / API-607 4 th Edition 1 PIECE REDUCED PORT BALL VALVE UNITS = INCHES SIZE CLASS 150 WEIGHTS L H W 1 1/2 11 6.50 3.86 9.06 2 21 7.01 4.65 9.06 3 40 7.99 5.98

More information

V33, VP33, VA33, VDA33, VH36 and VL36 Series for VCH36 Series for CNG/NGV applications Pressures up to 3,000 psig (206 bar) and 6,000 psig (413 bar)

V33, VP33, VA33, VDA33, VH36 and VL36 Series for VCH36 Series for CNG/NGV applications Pressures up to 3,000 psig (206 bar) and 6,000 psig (413 bar) Valves Check Valves V33, VP33, VA33, VDA33, VH36 and VL36 Series for VCH36 Series for CNG/NGV applications Pressures up to 3,000 psig (206 bar) and 6,000 psig (413 bar) No.V336-9 November 2014 Fixed cracking

More information

The VALTORC 520-SN Series 3/4/5-Way Sanitary Ball Valve. Standard Features and Benefits. Specifications

The VALTORC 520-SN Series 3/4/5-Way Sanitary Ball Valve. Standard Features and Benefits. Specifications The VATORC 50-SN Series 3/4/5-Way Sanitary Ball Valve The 50-SN is a true multi-way Ball valve with balanced seat construction. Porting and shut-off capabilities can reduce the number of process valves

More information

Ball Valves 3-Way Series

Ball Valves 3-Way Series Ball Valves 3-Way Series Pressures to 20,000 psi (1379 bar) Distributed By: Parker Autoclave Engineers high-pressure ball valves have been designed to provide superior quality for maximum performance within

More information

SCREWED BONNET NEEDLE VALVES

SCREWED BONNET NEEDLE VALVES SCREWED BONNET NEEDLE VALVES H-99 SERIES FEATURES n Blowout-Proof Stem n MAWP* up to 1, psi (69 bar) n MAWT* up to 648 C (12 F) n End connection size range: to 1" or to 25mm n Flow Coefficient (Cv) to1.5

More information

Trunnion Mounted Ball Valves

Trunnion Mounted Ball Valves Trunnion Mounted Ball Valves CONTENTS Product Coding for KITZ Trunnion Mounted Ball Valves 2 Soft seated 2 Metal seated 2 Soft Seated 3-Piece Body Trunnion Mounted Ball Valves T60S Series (1) 3 Component

More information

High Performance Butterfly Valves

High Performance Butterfly Valves Tech Bulletin Page 500-11 MAX SEAL HP SERIES High Performance Butterfly Valves Available with Soft and Metal Seating MODEL BL630 Size Range 2 thru 24, optional thru 120 ANSI Class 150//600/900 20 Lug 6

More information

HIGH PRESSURE BAR STOCK BALL VALVES. VB6B Series.

HIGH PRESSURE BAR STOCK BALL VALVES. VB6B Series. HIGH PRESSURE BAR STOCK BA VAVES VB6B Series www.unilok.com s - VB6B Series Features Pressure rating up to 6000psig (413bar) @21 (70 ) with standard PTFE seats 10000psig (689bar) @21 (70 ) with optional

More information

V33, VP33, VA33, VDA33, VH36 and VL36 Series VCH36 Series for CNG/NGV applications Pressures up to 3000 psig (206 bar) and 6000 psig (413 bar)

V33, VP33, VA33, VDA33, VH36 and VL36 Series VCH36 Series for CNG/NGV applications Pressures up to 3000 psig (206 bar) and 6000 psig (413 bar) V, VP, VA, VDA, VH6 and VL6 Series VCH6 Series for CNG/NGV applications Pressures up to g (26 ) and 6 g (4 ) Catalog No. V6 December 2 Features Fixed cracking pressure valves: V, VP, VH6, VCH6 Series Adjustable

More information

P630 High Flow Gas Regulator

P630 High Flow Gas Regulator High Flow Gas Regulator Stainless Steel Internals are Standard Steel Units comply with NACE MR0175 Durable Powder Coated Exterior Wide of Flow Capacities The is a spring loaded, direct-operated regulator

More information

Quarter Turn Ball Valve Systems 2 Pcs Body Design with Threaded Ends

Quarter Turn Ball Valve Systems 2 Pcs Body Design with Threaded Ends 2 Pcs Body Design with Threaded Ends Features Modular Program ball valve system igh quality investment cast stainless steel body and ends 2 pcs body full bore design, 2 way Blow out proof stem Disc spring

More information

One and Two-Piece Carbon Steel Flanged Ball Valves Illustrated Index

One and Two-Piece Carbon Steel Flanged Ball Valves Illustrated Index One and Two-Piece Carbon Steel Ball Valves Illustrated Index Unibody Carbon Steel Ball Valve ANSI Class 50 Unibody Carbon Steel Ball Valve ANSI Class 50 Unibody Design Detail Split-Body Design Detail Page

More information

Bellows-Sealed Valves

Bellows-Sealed Valves www.swagelok.com ellows-sealed Valves Working pressures up to 1000 psig (68.9 bar) Temperatures up to 900 F (482 C) 1/4, 3/8, 1/2, and 3/4 in.; 6, 10, and 12 mm end connections rass, stainless steel, and

More information

SWB 310 SERIES SWING - OUT BALL VALVES

SWB 310 SERIES SWING - OUT BALL VALVES SWB 30 SERIES SPECIFICATION Pressure Rating up to 000 psig (9 bar) at 00 (37 ) Temperature Range from -0 (-8 ) to 50 (3 ) TESTING Each valve is tested with nitrogen at 000 psig (9 bar) to maximum allowable

More information

Type Pneumatic Control Valve Type 3525 Globe Valve

Type Pneumatic Control Valve Type 3525 Globe Valve Type 355-1 Pneumatic Control Valve Type 355 Globe Valve Application Dump valve designed for use in high-pressure on/off applications in upstream oil and gas production. Valve size NPS 1 to 3 Pressure rating

More information

505F. Multi-Port Ball Valve. Full Port ISO 5211 Mounting Pad. For Automated & Manual Service. General Chemical. Industrial

505F. Multi-Port Ball Valve. Full Port ISO 5211 Mounting Pad. For Automated & Manual Service. General Chemical. Industrial 505F Multi-Port Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial and Other Corrosion Resistant Applications The 505F Series 3//5-Way Ball Valve The 505F

More information

Condensed Valve Guide Gate Globe Check Ball Strainer. Warren Valve - Quality Since 1963

Condensed Valve Guide Gate Globe Check Ball Strainer. Warren Valve - Quality Since 1963 800.231.6969 Condensed Valve Guide Gate Globe Check Ball Strainer Warren Valve - Quality Since 1963 Gate, Globe & Check Valves #1156 #2156 #3156 Gate Globe Check Pressures Class Figure 150 - #1156 300

More information

Tr unnion Ball Valve s

Tr unnion Ball Valve s www.swagelok.com Tr unnion Ball Valve s 83 Series and H83 Series Working pressures up to 10 000 psig (689 bar) 1/8 to 1/2 in. and 6 to 12 mm Swagelok tube fitting or NPT end connections 316 stainless steel

More information

Pressure Regulators K Series

Pressure Regulators K Series www.swagelok.com Pressure Regulators K Series Pressure-reducing models Back-pressure models Gas cylinder changeover model Vaporizing models Pressure Regulators, K Series 2 Swagelok K Series Pressure Regulator

More information

505F Multi-Port Ball Valve

505F Multi-Port Ball Valve 505F Multi-Port Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial Corrosion Resistant Applications The 505F Series Ball Valve The 505F is a true multi-way

More information

Toggle Valve s. OG, 1G, and 92 Series. Manual and pneumatically actuated models. Straight, angle, and cross body patterns

Toggle Valve s. OG, 1G, and 92 Series.   Manual and pneumatically actuated models. Straight, angle, and cross body patterns www.swagelok.com Toggle Valve s OG,, and 92 Series Manual and pneumatically actuated models Straight, angle, and cross body patterns 316 SS and brass body materials Features Compact, rugged design Opens

More information

Check Valves. C, CA, CH, CP, and CPA Series. Working pressures up to 6000 psig (413 bar) Adjustable and fixed cracking pressures

Check Valves. C, CA, CH, CP, and CPA Series. Working pressures up to 6000 psig (413 bar) Adjustable and fixed cracking pressures Check Valves C, CA, CH, CP, and CPA Series Working pressures up to 6000 psig (413 bar) Adjustable and fixed cracking pressures Variety of end connections 316 stainless steel and brass materials Check Valves

More information

BRASS & BRONZE VALVES

BRASS & BRONZE VALVES BRASS & BRONZE VALVES V200 series Cast Brass are economical general service valves. Ball valves feature chrome plated balls with teflon seats, adjustable packing glands and blowout-proof stems. V205 gate

More information

Ultra High Pressure Valves, Fittings and Tubing Pressures to 152,000 psi

Ultra High Pressure Valves, Fittings and Tubing Pressures to 152,000 psi Ultra High Valves, Fittings and Tubing s to 152,000 psi MXIMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability,

More information

Swing - Out Ball Valves. High Technology Valve & Fitting Series

Swing - Out Ball Valves. High Technology Valve & Fitting Series Swing - Out Ball Valves High Technology Valve & Fitting SWB 30 SERIES SPECIFICATION Pressure Rating up to 000 psig (69 bar) at 00 (37 ) Temperature Range from -0 (-8 ) to 50 (3 ) TESTING Each valve is

More information

Check Valves. C, CA, CH, CP, and CPA Series. Working pressures up to 6000 psig (413 bar) Adjustable and fixed cracking pressures

Check Valves. C, CA, CH, CP, and CPA Series. Working pressures up to 6000 psig (413 bar) Adjustable and fixed cracking pressures Check Valves C, CA, CH, CP, and CPA Series 1 www.swagelok.com Check Valves C, CA, CH, CP, and CPA Series Working pressures up to 6000 psig (413 bar) Adjustable and fixed cracking pressures Variety of end

More information

LNG & LPG Series. Locked Bonnet Gauge and Block & Bleed Valves. Needle Gauge Valves. Working Pressures up to 6000 psig (413 bar)

LNG & LPG Series. Locked Bonnet Gauge and Block & Bleed Valves.   Needle Gauge Valves. Working Pressures up to 6000 psig (413 bar) Locked Bonnet Gauge and Block & Bleed Valves LNG & LPG Series Wking Pressures up to 6000 psig ( bar) Temperature Range from -00 to 00 F (-7 to 68 C) Flow Coefficients up to.8 Needle Gauge Valves Block

More information

ANDERSON GREENWOOD M4AP/M4TP STATIC PRESSURE MANIFOLDS

ANDERSON GREENWOOD M4AP/M4TP STATIC PRESSURE MANIFOLDS ANDERSON GREENWOOD M4AP/M4TP STATIC PRESSURE MANIFOLDS Block and bleed, two valve manifolds with indirect and direct mount capabilities for static pressures to 6000 psig (414 barg) FEATURES GENERAL APPLICATION

More information

Instrumentation Quick-Connects

Instrumentation Quick-Connects Instrumentation Quick-Connects SQC SERIES Features Simple push-pull action to connect and disconnect lines - no tools required. Plug and body are available valved or unvalved. Valves automatically open

More information

Anderson Greenwood Series M9 Block and Bleed Gauge Valves

Anderson Greenwood Series M9 Block and Bleed Gauge Valves A valve with an interchangeable hard or soft seat and an integral bleed plug specifically designed to facilitate safe, compact, economical gauge installation and operation Features General application

More information

BA-350 Series (Medical Gas Service) 3-Piece Bronze Ball Valve With Extended Copper-Tube Ends

BA-350 Series (Medical Gas Service) 3-Piece Bronze Ball Valve With Extended Copper-Tube Ends BA-350 Series (Medical Gas Service) 3-Piece Bronze Ball Valve With Extended Copper-Tube Ends 3-Piece, Full-Port, Bronze Ball Valve Extended-Tube Ends Ideal for use in medical gas systems, pharmaceutical

More information

V16 Series Severe Service Union Bonnet Valves Pressure Rating up to 6000psig Catalog No. V16-2 Sept. 2004

V16 Series Severe Service Union Bonnet Valves Pressure Rating up to 6000psig Catalog No. V16-2 Sept. 2004 R V16 Series Severe Service Union Bonnet Valves Pressure Rating up to 6000psig Catalog No. V162 Sept. 2004 Features Pressure up to 6000 psig (413 bar) @ 37C (100F). High Temperatures up to 300C (572F)

More information

Medium Pressure Instrumentation Ball & Needle Valves, Fittings & Relief Valves

Medium Pressure Instrumentation Ball & Needle Valves, Fittings & Relief Valves Medium Pressure Instrumentation Ball & Needle Valves, Fittings & Relief Valves (Up to and including 20,000 psi / 1,379 bar) Keeping the World Flowing Contents Page Contents Black - Instrumentation Ball

More information

Rising Plug Valves. 4P and 5P Series. Roddable, straight-through orifice for maximum flow. Working pressures up to 6000 psig (413 bar)

Rising Plug Valves. 4P and 5P Series. Roddable, straight-through orifice for maximum flow. Working pressures up to 6000 psig (413 bar) Rising Plug Valves4P and 5P Series 1 www.swagelok.com Rising Plug Valves 4P and 5P Series Roddable, straight-through orifice for maximum flow Working pressures up to 6000 psig (413 bar) Packing below the

More information

F20 Series Ball Valve Index

F20 Series Ball Valve Index F0 Series Ball Valve Index Features & Benefits F0CS/F0SS Class 50/00 " - " F0CS/F0SS Class 50/00 " - " F0CS/F0SS Class 50/00 " - " State of California Prop 5 WARNING: Cancer and Reproductive Harm. For

More information

Wellhead Valves. DHV Industries,Inc. DHV Valve Company Inc.

Wellhead Valves. DHV Industries,Inc. DHV Valve Company Inc. DHV Industries,Inc. 3451 Pegasus Drive, Bakersfield. CA 93308 U.S.A. Call TollFree: (887) DHV-USA1 Phone: (661) 392-8948 Fax: (661) 392-8947 E-mail: sales@dhvindustries.com Website: www.dhvindustries.com

More information

Anderson Greenwood PTM/PT7 Static Pressure Manifolds

Anderson Greenwood PTM/PT7 Static Pressure Manifolds m o Anderson Greenwood PTM/PT7 Static Pressure Manifolds Two valve calibration manifolds with a choice of metal and soft seats for static pressures up to 6000 psig (414 barg) PT7 PTM Features Cost savings

More information

Integral-Bonnet Needle Valves

Integral-Bonnet Needle Valves Integral-Bonnet Needle ValvesO, 1, 18, 20, and 26 Series 1 www.swagelok.com Integral-Bonnet Needle Valves O, 1, 18, 20, and 26 Series Live-loaded packing system Compact design Working pressures up to 6000

More information

MERCER VALVE SERIES Threaded THINK...MERCER FIRST MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY

MERCER VALVE SERIES Threaded THINK...MERCER FIRST MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY 9100 SERIES Threaded MERCER VALVE THINK...MERCER FIRST 9100 Series Threaded Product Overview The Mercer Valve 9100 Series Pressure Relief Valve is State of the

More information

Trunnion Ball Valves. TB Series. Wide variety of end connection types and sizes. Flow Coefficient: up to 1.6

Trunnion Ball Valves. TB Series.   Wide variety of end connection types and sizes. Flow Coefficient: up to 1.6 Trunnion Ball Valves Series Working Pressure: up to 10,000 psig (689 bar) End Connections: 1/8 to 3/4 in. (6 to 1 mm) Temperature Range: -40 to 450 F (-40 to 3 C) -way and 3-way valves Flow Coefficient:

More information

High Pressure Ball Valves. Ball Valves

High Pressure Ball Valves. Ball Valves High Pressure 79 Valve Options Reliable, simple, operation for onoff service Fast acting, one quarter turn fully opens or closes the valve Maximum performance, straight through flow for minimum turbulence

More information

Instrument Ball Valves

Instrument Ball Valves www.swagelok.com Instrument all s 40 Series On-off, switching, and crossover flow paths Working pressures up to 3000 psig (206 bar) Temperatures from 50 to 150 (10 to 65 ) Low-temperature service option

More information

Swagelok Alternative Fuel Ser vice (AFS) Ball Valves

Swagelok Alternative Fuel Ser vice (AFS) Ball Valves www.swagelok.com Swagelok Alternative Fuel Ser vice (AFS) Ball Valves For High-Pressure, High-Flow Applications Swagelok AFS Ball Valves Working pressures up to 6000 psig (413 bar) Flow coefficients (C

More information

Electronic Ball Valve Guide Specifications

Electronic Ball Valve Guide Specifications Electronic Ball Valve Guide Specifications Control Valve Assemblies Ball Valve Bodies All ball valves used for modulating or floating (tri-state) control must be furnished with a stainless steel ball &

More information

CV3000 Series. Control Ball Valve 4000 psi WOG (276 bar) Fully Customizable Flow Control Inserts Carbon, Stainless, Alloy Bar Stock Construction

CV3000 Series. Control Ball Valve 4000 psi WOG (276 bar) Fully Customizable Flow Control Inserts Carbon, Stainless, Alloy Bar Stock Construction 4 psi WOG (276 bar) CV3 Series CV3F-xxx Series Full Port Valve CV3R-xxx Series Reduced Port Valve Features Uni-directional control valve Zero leakage shutoff, soft seated Upstream Cv plate control element

More information

ANDERSON GREENWOOD SERIES M9 BLOCK AND BLEED GAUGE VALVES

ANDERSON GREENWOOD SERIES M9 BLOCK AND BLEED GAUGE VALVES A valve with an interchangeable hard or soft seat and an integral bleed plug specifically designed to facilitate safe, compact, economical gauge installation and operation FEATURES GENERAL APPLICATION

More information

Check Valves, Filters and Relief Valves

Check Valves, Filters and Relief Valves Check Valves, Filters and Relief Valves Catalog 4135-CV December 2010 Series Check Valves Catalog 4135-CV Introduction Parker Series Check Valves are designed for uni-directional flow control of fluids

More information

Ball Valves in investment cast stainless 2-way

Ball Valves in investment cast stainless 2-way Ball Valves in investment cast stainless 2-way way, 3-piece construction Can be combined with 1000 / 800 PSI WOG Thread, socket and butt weld ends Full Port to Schedule 40 pipe Semi lugged body Blow-out

More information

Trunnion Ball Valves. TB Series. Working Pressure: up to 10,000 psig (689 bar) End Connections: 1/8 to 3/4 in.

Trunnion Ball Valves. TB Series.  Working Pressure: up to 10,000 psig (689 bar) End Connections: 1/8 to 3/4 in. Trunnion Ball Valves Series Working Pressure: up to 10,000 psig (689 bar) Temperature Range: -40 to 450 F (-40 to 3 C) Flow Coefficient: up to 1.6 End Connections: 1/8 to 3/4 in. (6 to 1 mm) -way and 3-way

More information

Flow Limit Safety Shutoff Valves Model 1

Flow Limit Safety Shutoff Valves Model 1 Flow Limit Safety Shutoff Valves Model 1 Model 1 Series flow limit safety shutoff valves automatically shutoff all flow from the cylinder when flow exceeds a factory preset level. The Model 1 is normally

More information

Mallard Control Control Valves

Mallard Control Control Valves Control Valves Excellence In Flow Control Mallard Model 5100 Freezeless Control (Dump) Valve Features Compact valve size Stainless steel trim Threaded process connections NACE MR0175 compliance option

More information