Issue/Rev. 0.3 (2/04) Bulletin P

Transcription

1 Form No. P E-Type Transmitter Parts List Issue/Rev. 0.3 (2/04) Bulletin P (Previous Design) Switch and Network Assembly The Switch and Network Assembly is no longer available. To replace the previous design, use Part No Field Retro-Fit Kit. The Most Trusted Name In Measurement

2 Item Description Qty. Part Number 1 Bearing, Rotor Shaft Bushing Bushing R Standoff, #10-32 x 1.12" Breather (Previous Design) Bushing, Center Shaft Button, Plug 3/8" Collar, Drive Shaft Collar, Rotor Shaft Coupling, Input Coupling, Output Cover: Standard BASEEFA Version Gasket Gear Assembly, Drive - See Gear Chart Gear Assembly, Idler - See Gear Chart 16 Gear Assembly, Idler - See Gear Chart Gear Assembly, Idler - See Gear Chart 18 Gear, Output: 25T T T T Gear, Rotor - See Gear Chart: 20 Shaft, Rotor Pin, Roll, 5/64 x 1/2" Housing (Includes Items 1 and 7): Standard BASEEFA Version Hub Label, Hook-Up R Magnet and Holder R+ PNHR Board Pin, Groove, 1/16 x 5/8" Ring, Retaining, 1/4" Truarc Screw, Cover, 5/16"-18 x 1" Fill Hd. Slot, Drilled: Standard BASEEFA Version - Top BASEEFA Version - Bottom Screw, #6-32 x 1/2" Fill Hd. Slot Screw, 3/8-16 x 7/8" Hex Hd., Drilled Screw, Set, #6-32 x 1/8" Hex Sock Hdls. Cup Point R Screw, Set, #6-32 x 3/16" Hex Sock Hdls. Cup Point Screw, Set: #8-32 x 1/4" Hex Sock Hdls. Cup Point #8-32 x 1/8" Hex Sock Hdls. Cup Point Screw, Set, #10-32 x 3/8", Hex Sock Hdls. Cup Point R Screw, #10-32 x.31" Seal, Wire, and Lead, 7/16" Dia. 30" Wire Length R Screw, #6-32 x.25" Shaft, Drive Spacer, 1/2" OD x.0257" ID x 0.312" Long Stud Assembly, Idler With Hub Washer: 17/64" x 1/2" x.020" Brass - Standard /4" x.062" Stainless Steel - BASEEFA Page 2 P Issue/Rev. 0.3 (2/04)

3 Item Description Qty. Part Number 43 Washer,.200" x 1/2" x.010" Steel Nameplate: Standard BASEEFA Plate, Caution: Standard BASEEFA Screw Recommended stock. R Indicates change since last Note 1: Apply sufficient amount of grease, Part No , when replacing Note 2: Apply anti-seize lubricant, Part No , to all cover mounting Note 3: Apply one drop of Loctite, Part No , to lock screws in Note 4: The following general assembly number requires Part No Set Screw: , 06, 07, 08, 09, 10, 11, 13, 14, 15, 16, 19, 20, 24, 25, 29, 32, 33, 34, 38, 40, 42, 45, 46, 48, 49, 52, 55, 56, 57, 58, 62, 64, 72, 76, 77. Issue/Rev. 0.3 (2/04) P Page 3

4 Gear Chart Idler Gear ratios are shown in top/bottom order as they should be assembled in transmitter. See Sales Department Bulletin SS01044 for output per gallon or per barrel for various meters series idlers are worms: 1L designates a single lead worm; 2L designates a double lead worm gear. Item Description Qty. Part Number General Drive Gear Item 16 Idler Item 17 Idler Item 18 Idler Item 19 Rotor Gear Item 21 Fork Output Assembly Model Part No. Teeth Part No. Ratio Part No. Ratio Part No. Ratio Part No. Teeth Turns Pulses E-A / / / E-B / / / E-C / E-E / / / E-F / / / E-G / E-H / E-J / / / E-K / / / E-L / / / E-M / E-N / / L/ E-P / / / E-R / / / E-S / / / E-T / / / E-U / / L/ E-W / / L/ E-X / / / E-Y / / / E-Z / / L/ E-AA / / L/ E-AB / / / E-AC / E-AD / / / E-AE / / L/ E-AF / / / E-AG / / L/ E-AH / / / E-AK / / / E-AL / E-AN / / / E-AO / / L/ E-AP / / L/ E-AR / / L/ E-AS / / / E-AT / E-AU / E-AW / / / E-AX / / / (Continued on next page) Page 4 P Issue/Rev. 0.3 (2/04)

5 Item Description Qty. Part Number Drive Gear Item 16 Idler Item 17 Idler Item 18 Idler Item 19 Rotor Gear Item 21 General Fork Output Assembly Model Part No. Teeth Part No. Ratio Part No. Ratio Part No. Ratio Part No. Teeth Turns Pulses E-AY / / L/ E-AZ / / / E-BA / / / E-BB / E-BC / / / E-BD / E-BE / / / E-BF / / L/ E-BG / / L/ E-BH / / / E-BI / / / E-BJ / / / E-BK / / / E-BL / / L/ E-BM / / / E-BN / / / E-BO / / / E-BP / / / E-BR / / / E-BS / / / E-BT / / / E-BU / / / E-BV / / / E-BW / / L/ E-BX / E-AL / (Mod) E-BB / (SS) E-CA / / / E-CB / / / E-CC / / / E-CD / / / E-CE / / / E-CF / / / E-CG / / / E-CH / / / E-CI / / L/ E-CJ / / L/ Issue/Rev. 0.3 (2/04) P Page 5

6 The specifications contained herein are subject to change without notice and any user of said specifications should verify from the manufacturer that the specifications are currently in effect. Otherwise, the manufacturer assumes no responsibility for the use of specifications which may have been changed and are no longer in effect. Headquarters: 1803 Gears Road, Houston, TX USA, Phone: 281/ , Fax: 281/ Gas Measurement Products: Erie, PA USA Phone 814/ Thetford, England Phone (44) Kongsberg, Norway Phone (47) 32/ Buenos Aires, Argentina Phone 54 (11) Integrated Measurement Systems: Corpus Christi, TX USA Phone 361/ Kongsberg, Norway Phone (47) 32/ San Juan, Puerto Rico Phone 787/ United Arab Emirates, Dubai Phone / Visit our website at Liquid Measurement Products: Erie, PA USA Phone 814/ Longmont, CO USA Phone 303/ Los Angeles, CA USA Phone 661/ Slough, England Phone (44) Ellerbek, Germany Phone (49) Barcelona, Spain Phone (34) 93/ Moscow, Russia Phone (7) 495/ Printed in U.S.A. 1/01 FMC Technologies Measurement Solutions, Inc. All rights reserved. P Issue/Rev. 0.3 (2/04) Melbourne, Australia Phone (61) 3/ Beijing, China Phone (86) 10/ Singapore Phone (65) Chennai, India Phone (91) 44/