Specification Data CH /10. Putting You In Control Series. Double Ported Globe Valves

Transcription

1 Putting You In Control Specification ata CH000 11/ 000 Series ouble Ported Globe Valves

2 resser Masoneilan 000 Series ouble Ported Globe Valves 2 resser Masoneilan

3 Table of Contents Features...1 Numbering System... 2 General ata... 2 Temperature Range / Seat Leakage... 3 Ratings / Connections... 4 Flow Coefficient - Rated C V... 4 C V and F L Versus Travel... 5 Materials of Construction... 7 Valve imensions Valve Weights Actuator imensions and Weights Sales Offices... Back Cover Features The 000 Series double seated control valves are semi-balanced designs, providing high allowable pressure drops, reduced actuator thrust requirements, and large flow areas to effectively handle dirty fluid applications. Standard features include: Excellent Performance & Reliability Separate top and bottom guides in the Masoneilan 000 Series provide heavy duty plug and stem support throughout the valve stroke range. This results in excellent throttling control characteristics and high product reliability. High Pressure rop Capability The 000 Series offers a semi-balanced trim construction, which allows for application in higher pressure drop applications using standard actuation. This also helps to reduce product complexity and overall assembly size and weight. irty Service esign Large flow areas within the 000 Series design, makes it an excellent choice for applications involving dirty fluids. Foreign particles can pass through the valve without negatively affecting control performance. Easy Field Maintenance The 000 Series is designed for top and bottom entry, allowing for quick access to the key trim and soft good components. This also permits easy access to the top and bottom guides for repair or replacement. Reduced Emissions The 000 Series can be supplied with the Masoneilan LE Packing design to provide low emissions performance meeting various environmental regulations worldwide. NACE Compliance Construction for Sour Service Applications in accordance with NACE standard MR 03 is readily available. Applications requiring compliance to MR 0175, 2003 Rev or ISO can also be provided. CH Series ouble Ported Globe Valves 1

4 Numbering System 1st 2nd 1st 2nd 3rd 4th 5th Actuator Type Body Series Plug Type Control Characteristics Seat Type 87 Spring iaphragm Air to Close 88 Spring iaphragm Air to Open 1. ouble Seat 3. Equal % (V-Port) 2. own Seating 6. Quick Opening 7. Linear General ata Flow irection All trim: Body Type: Flow through both ports ouble seat globe Body Bonnet & Lower Flange Type: Bolted Bonnet & Lower Flange Materials: Carbon steel Stainless steel Chrome-molybdenum steel Trim Plug type: Seat ring: Guide: Capacity: ouble seat V-port or contoured Threaded Heavy top and bottom guiding Full area Cv ratio: 50:1 Reduced capacity (0.4 factor) Flow characteristics: Equal percentage Actuator Type: Handwheel: Quick opening Linear Spring diaphragm Optional 2 resser Masoneilan

5 Temperature Range / Seat Leakage Valve Size (1) inch mm Body Rating Body & Bonnet Material Temperature Range Standard Bonnet Extension Bonnet min. max. min. max. Seat Leakage IEC and ANSI/FCI 70.2 Class Carbon Steel -4 F +450 F (1) -4 F +800 F (-20 C) (+232 C) (-20 C) (+427 C) 0.75 to to 400 ASME Class 150 to 600 (PN 20 to 0) Stainless Steel Chrome- Moly -20 F +450 F (1) -148 F +800 F (-29 C) (+232 C) (-0 C) (+427 C) 32 F +450 F (1) 32 F +800 F (0 C) (+232 C) (0 C) (+427 C) II NACE -4 F (-20 C) +450 F (+232 C) 1) Maximum temperature shown is with PTFE packing and LE Packing. Extended max. operating temperature of 800 F (427 C) allowable with Graphite packing. 2) LE Packing for low emissions applications is limited to maximum pressure and temperature as shown in chart below (112) 1400 (98) Pressure and Temperature Rating of LE Packing Fluid Pressure PSI (Bar) 1200 (84) 00 (70) 800 (56) 600 (42) 400 (28) 200 (14) () (38) (66) (93) (121) (149) (177) (204) (232) (260) Fluid Temperature F ( C) CH Series ouble Ported Globe Valves 3

6 Ratings / Connections n RF Flanged RT Joint n Butt Weld m Socket Weld l Threaded Valve Size ASME Class Inch mm n l m n l m n l m 1 25 n l m n l m n l m n l m n l m n l m 2 50 n l m n l m n l m 3 80 n n n 4 0 n n n n n n n n n 250 n n n n n n n n n n n n 1) Consult factory for availability of additional sizes and end connections. Flow Coefficient Rated C v Nominal Size Inch mm Travel Inch mm Full Capacity C v (1) Reduced Capacity C v (2) (3) (4) (4) - 1) Rated C v for Quick Opening trim is 1.3 times values shown. 2) 1" size reduced capacity trim is same as.75" size full area trim. 3) Consult factory for details on 14" size. 4) 14" and 16" sizes are only available with Equal Percentage trim. 4 resser Masoneilan

7 C V and F L versus Travel Contoured Trim ASME Class 150 to 600 Flow Characteristic: LINEAR F L Valve Size inch Percent of Travel Orifice iameter inch Full Area Reduced Area Travel inch Rated C V / / / / / / / / / / / / / / / / / / / CH Series ouble Ported Globe Valves 5

8 C V and F L versus Travel V-Port Trim ASME Class 150 to 600 Flow Characteristic: EQUAL PERCENTAGE F L Valve Size inch Percent of Travel Orifice iameter inch Full Area Reduced Area Travel inch Rated C V / / / / / / / / / / / / / / / / / / / / / resser Masoneilan

9 Materials of Construction CH Series ouble Ported Globe Valves 7

10 Materials of Construction Standard Carbon Steel Version No. Temperature Range escription 2 Packing Flange Nut 3 Packing Flange -4 F 650 F 800 F Materials 1 Plug Stem 316 St. St. ASTM 479 TY 316 St. St. ASTM A194 GR 8 Zinc ichromate Carbon Steel ASTM A5 4 Packing Flange Stud 304 St. St. ASTM A193 GR B8 5 rive Nut Carbon Steel SAE 1117 or ASTM A216 GR WCC 6 Valve Bonnet 9 Plug Carbon Steel ASTM A216 Grade WCC or ASTM A5 7 Valve Body Carbon Steel ASTM A216 Grade WCC 8 Plug Pin 316 St. St. ASTM 479 TY St. St. ASTM 479 TY St. St. with Hardfaced 316 St.St.with Hardfaced Seat Seat and Guide Lower Flange Carbon Steel ASTM A216 Grade WCC or ASTM A5 11 Body Stud Nut Carbon Steel ASTM A194 GR 2H 12 Body Stud Alloy Steel ASTM A193 GR B7 13 Body Gasket 316L St. St. w/flexible Graphite Filler (Spiral Wound) 14 Guide Bushing 440C St. St. ASTM A276 TY 440C Stellite 6 UNS Lower Seat Ring 16 Upper Seat Ring 316 St. St. ASTM 479 TY St.St. with Hardfaced Seat 316 St. St. ASTM 479 TY St.St. with Hardfaced Seat 18 Lantern Ring (Optional) Austenitic 300 Series Stainless Steel 19 Packing Follower Austenitic 300 Series Stainless Steel No. 316 St. St. with Hardfaced Seat 316 St. St. with Hardfaced Seat Temperature Range -20 C 343 C 427 C 8 resser Masoneilan

11 Materials of Construction Standard Stainless Version No. 1 Temperature Range escription -148 F -20 F 650 F 800 F Materials 2 3 Packing Flange Nut Packing Flange St. St. ASTM A194 GR 8 Zinc ichromate Carbon Steel ASTM A5 4 5 Packing Flange Stud rive Nut 304 St. St. ASTM A193 GR B8 Carbon Steel SAE 1117 or ASTM A216 GR WCC 6 Plug Stem Valve Bonnet Plain Version 316 St. St. ASTM 479 TY Stainless Steel ASTM A351 Grade CF8M or ASTM A182 Grade F No. Valve Bonnet Extended Version Valve Body Plug Pin Plug Lower Flange Body Stud Nut Body Stud Body Gasket Guide Bushing Lower Seat Ring Upper Seat Ring Lantern Ring (Optional) 316 Stainless Steel ASTM A351 Grade CF8M 316 St. St. ASTM 479 TY St. St. ASTM 479 TY St. St. with Hardfaced 316 St.St. with Hardfaced Seat Seat and Guide ASTM A193 Gr. B8 (1)(3) 316L St. St. w/flexible Graphite Filler (Spiral Wound) 316 St. St. ASTM 479 TY St.St. with Hardfaced Seat 316 St. St. ASTM 479 TY St.St. with Hardfaced Seat or ASTM A182 Grade F Stainless Steel ASTM A351 Grade CF8M 316 Stainless Steel ASTM A351 Grade CF8M or ASTM A182 Grade F316 Carbon Steel ASTM A194 GR 2H Zinc ichromate Plating ASTM A194 Gr. 8 (1) Alloy Steel ASTM A193 GR B7 Zinc ichromate Plating Stellite 6 (2) Austenitic 300 Series Stainless Steel C. S. ASTM A194 GR 2H (No Zinc) Alloy Steel ASTM A193 GR B7 (3) 316 St. St. with Hardfaced Seat 316 St. St. with Hardfaced Seat Packing Follower Austenitic 300 Series Stainless Steel Temperature Range -0 C -29 C 343 C 427 C 1) Use of non-plated bolting must be reviewed by the factory for proper application. 2) For operating temperatures above 650 F (343 C), the Solid Stellite bushings are tack welded to the bonnet and lower flange to account for thermal expansion. 3) ASTM A453 Gr. 660 may be required to meet low temperature or corrosion resistance requirements. CH Series ouble Ported Globe Valves 9

12 Materials of Construction Standard Chrome-Moly Version No Temperature Range escription Plug Stem Packing Flange Nut Packing Flange Packing Flange Stud rive Nut Valve Body Plug Pin Plug Body Stud Nut Body Stud Body Gasket Guide Bushing Lower Seat Ring Upper Seat Ring -32 F 650 F 800 F 316 St. St. ASTM 479 TY St. St. ASTM 479 TY St. St. with Hardfaced 316 St.St. with Hardfaced Seat Seat and Guide 316L St. St. w/flexible Graphite Filler (Spiral Wound) 316 St. St. ASTM 479 TY St.St. with Hardfaced Seat 316 St. St. ASTM 479 TY St.St. with Hardfaced Seat Materials 316 St. St. ASTM 479 TY 316 St. St. ASTM A194 GR 8 Zinc ichromate Carbon Steel ASTM A5 304 St. St. ASTM A193 GR B8 Carbon Steel SAE 1117 or ASTM A216 GR WCC 6 Valve Bonnet Chrome-Molybdenum Steel ASTM A217 Grade WC9 Chrome-Molybdenum Steel ASTM A217 Grade WC9 Lower Flange Chrome-Molybdenum Steel ASTM A217 Grade WC Carbon Steel ASTM A194 GR 2H Alloy Steel ASTM A193 GR B7 440C St. St. ASTM A276 TY 440C Stellite 6 UNS St. St. with Hardfaced Seat 316 St. St. with Hardfaced Seat 18 Lantern Ring (Optional) Austenitic 300 Series Stainless Steel 19 Packing Follower Austenitic 300 Series Stainless Steel No. Temperature Range 0 C 343 C 427 C Standard Chrome-Moly Version No. 17 No. Temperature Range escription Standard Packing Bonnet Extension Packing Bonnet -20 F 450 F 800 F Materials PTFE Packing LE Packing Grafoil + Graphite wiper rings PTFE Packing LE Packing Temperature Range -29 C 232 C 427 C resser Masoneilan

13 Materials of Construction NACE Materials Construction -20 F 450 F Temperature Range No. escription Standard and Optional Materials (1) 1 Plug Stem 316 St. St. ASTM A479 TY 316 (HRC 22 Max.) ASTM A638 Gr 660 (2) 304 St. St. ASTM A194 Gr 8 (3) (non exposed) 2 Packing Flange Nut Alloy Steel ASTM A194 Gr 8A (4) (exposed) 3 Packing Flange Zinc ichromate Carbon Steel ASTM A5 4 Packing Flange Stud 304 St. St. ASTM A193 GR B8 (exposed and non exposed) 5 rive Nut Carbon Steel SAE 1117 (3) Carbon Steel ASTM A5 or SAE -25 (4) Carbon Steel ASTM A216 Grade WCC (HRC 22 Max.) 6 Valve Bonnet Carbon Steel ASTM A5 (HRC 22 Max.) 316 St. St. ASTM A351 Gr CF8M (HRC 22 Max.) 7 Valve Body Carbon Steel ASTM A216 Grade WCC (HRC 22 Max.) 316 St. St. ASTM A351 Gr CF8M (HRC 22 Max.) 8 Plug Pin 316 St. St. ASTM A479 TY 316 (HRC 22 Max.) 316 St. St. ASTM A479 TY 316 (HRC 22 Max.) 9 Plug 316 St. St. ASTM A479 TY 316 with Hardfaced Seat (HRC 22 Max.) Carbon Steel ASTM A216 Grade WCC (HRC 22 Max.) Lower Flange Carbon Steel ASTM A5 (HRC 22 Max.) 316 St. St. ASTM A351 Gr CF8M (HRC 22 Max.) 11 Body Stud Nut ASTM A194 GR 2H (3) (non exposed) ASTM A194 Gr 2HM (4) (exposed) ASTM A194 GR 2H Zinc Plating (3)(5) (non exposed) ASTM A194 Gr 2HM Zinc Plating (4)(5) (exposed) Body Stud Body Gasket ASTM A193 GR B7 (3) (non exposed) ASTM A193 Gr B7M (4) (exposed) ASTM A193 GR B7 Zinc Plated (3)(5) (non exposed) ASTM A193 Gr B7M Zinc Plated (4)(5) (exposed) 316L St. St. w/flexible Graphite Filler (Spiral Wound) 14 Guide Bushing Stellite 6 UNS No. Temperature Range -29 C 232 C CH Series ouble Ported Globe Valves 11

14 Materials of Construction NACE Materials Construction -20 F 450 F Temperature Range No. escription Standard and Optional Materials (1) 15 Lower Seat Ring 316 St. St. ASTM A479 TY 316 (HRC 22 Max.) 316 St. St. ASTM A479 TY 316 with Hardfaced Seat (HRC 22 Max.) 316 St. St. ASTM A479 TY 316 (HRC 22 Max.) 16 Upper Seat Ring 17 Packing 18 Lantern Ring (Optional) 19 Packing Follower 316 St. St. ASTM A479 TY 316 with Hardfaced Seat (HRC 22 Max.) PTFE Packing 304 St. St. ASTM A479 TY St. St. ASTM A479 TY 304 No. Temperature Range -29 C 232 C 1) Materials and processes in accordance with the requirements of NACE specification MR03, Applications requiring compliance to MR0175, 2003 Rev. or ISO would require engineering review. 2) ASTM A638 Gr 660 will be substituted in applications when required due to the differential pressure. 3) Materials designated for these parts conform to NACE Class III (unexposed) bolting requirements. 4) Materials designated for these parts conform to NACE Class I or Class II (exposed) bolting requirement. 5) Zinc plating is mandatory for St. Steel construction only. 12 resser Masoneilan

15 Valve imensions Flanged Ends Socket Weld or Threaded Ends 000 Series imensions (inches) Valve Size inches mm ASME Class 150 ASME Class 300 ASME Class 600 RF RTJ RF RTJ RF RTJ ASME Class and equivalent PN Threaded & Socket Weld A A A A A A A Valve Size ASME Class inches mm B C (ST.Bonnet) C (EB Bonnet) CH Series ouble Ported Globe Valves 13

16 Valve imensions Flanged Ends Socket Weld or Threaded Ends 000 Series imensions (mm) Valve Size mm inches ASME Class 150 ASME Class 300 ASME Class 600 RF RTJ RF RTJ RF RTJ ASME Class and equivalent PN Threaded & Socket Weld A A A A A A A Valve Size ASME Class mm inches B C (ST.Bonnet) C (EB Bonnet) resser Masoneilan

17 Valve Weights Weights in (lbs) inches Valve Size mm ASME Class Threaded & Socket Weld ASME Class 150 ASME Class 300 Flanged ASME Class (1) ) Consult factory for weight data on 14" size. Weights in (kg) mm Valve Size inches ASME Class Threaded & Socket Weld ASME Class 150 ASME Class 300 Flanged ASME Class (1) ) Consult factory for weight data on 14" size. CH Series ouble Ported Globe Valves 15

18 Actuator imensions and Weights (in./lbs) XX YY imensions and Weights C Shown with optional Handwheel Actuator Size Actuator imensions (inches) Weights (lbs.) A B (Model 88) C Standard w/handwheel (17.52) (21.54) (30.79) (33.27) Actuator Removal Clearance = 6 inches Center of Gravity (inches) Without Handwheel Size X Y With Handwheel Size XX YY Limit Stops (inches) Up Stop Size Model Overall Height B own Stop Size Model Overall Height B resser Masoneilan

19 Actuator imensions and Weights (in./lbs) XX YY imensions and Weights C Shown with optional Handwheel Actuator Size Actuator imensions (mm) Weights (kg) A B (Model 88) C Standard w/handwheel (445) (547) (782) (845) Actuator Removal Clearance = 152mm Center of Gravity (mm) Without Handwheel Size X Y With Handwheel Size XX YY Limit Stops (mm) Up Stop Size Model Overall Height B own Stop Size Model Overall Height B CH Series ouble Ported Globe Valves 17

20 IRECT SALES OFFICE LOCATIONS BELGIUM Phone: Fax: BRAZIL Phone: Fax: CANAA Ontario Phone: Fax: CHINA Phone: Fax: FRANCE Courbevoie Phone: Fax: GERMANY Viersen Phone: Fax: INIA Mumbai Phone: Fax: New elhi Phone: Fax: ITALY Phone: Fax: JAPAN Chiba Phone: Fax: KOREA Phone: Fax: MALAYSIA Phone: Fax: MEXICO Phone: Fax: THE NETHERLANS Phone: Fax: RUSSIA Veliky Novgorod Phone: Fax: Moscow Phone: Fax: SAUI ARABIA Phone: Fax: SINGAPORE Phone: Fax: SOUTH AFRICA Phone: Fax: SOUTH & CENTRAL AMERICA AN THE CARIBBEAN Phone: Fax: SPAIN Phone: Fax: UNITE ARAB EMIRATES Phone: Fax: UNITE KINGOM Wooburn Green Phone: Fax: UNITE STATES Massachusetts Phone: Fax: Corpus Christi, Texas Phone: Fax: resser irect eer Park, Texas Phone: Fax: resser Flow Technologies Houston, Texas Phone: Fax: California Phone: Fax: About resser, Inc. resser Inc. is a global leader in providing highly-engineered infrastructure products for the global energy industry. Leading brand names within the resser portfolio include resser Wayne retail fueling systems, Waukesha natural gas-fired engines, Masoneilan control valves, Consolidated pressure relief valves, and ROOTS blowers and rotary gas meters. The company has manufacturing and customer service facilities strategically located worldwide and a sales presence in more than 150 countries. About resser Masoneilan resser Masoneilan, headquartered in Houston, Texas, has been the leading global partner in process control valves and solutions for more than 0 years. A business segment of resser, Inc., the company delivers customized products, services and diagnostic solutions for oil and gas, process and power generation applications. resser Masoneilan resser, Inc., Flow Technologies 343 Sam Houston Park rive Houston, Texas U.S.A T F E. sales@masoneilan.com 20 resser, Inc. All rights reserved. CH000 11/