Design ET, EAT, and ETR Sliding-Stem Control Valves

Size: px
Start display at page:

Download "Design ET, EAT, and ETR Sliding-Stem Control Valves"

Transcription

1 Product Bulletin Design ET, EAT, and ETR Sliding-Stem Control Valves ET Valve Design ET, EAT, and ETR general-purpose control valves (figures 1,,, and ) are used for throttling or on-off control of a wide variety of liquids and gases. All three valve designs have single ports, balanced valve plugs, and cage guiding. Metal-to-PTFE seating for stringent shutoff requirements is standard in all valves except those with Cavitrol III cages. Metal-to-metal seating for higher temperatures is standard for valves with Cavitrol III cages and optional for all other valves. The temperature limits of Design ET valves can be extended above C (50 F) by using PEEK (PolyEtherEtherKetone) anti-extrusion rings in combination with a spring-loaded PTFE seal. The PEEK anti-extrusion rings expand to close off the clearance gap between the plug and the cage where the PTFE seal may extrude at high temperatures and pressures. The temperature limits are extended to 1 C (00 F) for non-oxidizing service and to 0 C (500 F) for oxidizing service. Unless otherwise noted, all NACE references are to NACE MR The easy-e Valve Family Design ET, EAT, and ETR control valves are part of the versatile easy-e family of industrial control valves from Fisher. easy-e valves share the following characteristics: Multiple trim material choices Interchangeable, restricted-capacity trims and full-sized trims to match variable process flow demands Different cage/plug styles that provide particular flow characteristics for highly-specialized applications. The standard cage comes in three different flow characteristics: quick-opening, linear, or equal percentage. W191- / IL Figure 1. Design ET Control Valve with Type 7 Actuator D

2 ET Valve Contents Features ENVIRO-SEAL and HIGH-SEAL Packing Systems ANSI/FCI Class VI Shutoff Capabilities Tables Available Constructions Shutoff Classifications Class VI Shutoff Availability Class VI Trim Materials Trim Materials Materials and Temperature Limits for Other Parts Valve Body/Trim Temperature Capabilities Bonnet Selection Guidelines Maximum Flow Coefficients Port Diameters, Valve Plug Travel, Stem and Yoke Boss Diameters Metal Trim Parts (NACE) Bolting Materials and Temperature Limits (NACE) Dimensions Ordering Information Coefficients Specifications ENVIRO-SEAL Packing System Specifications Whisper Trim I, Whisper Trim III (figure 7), and WhisperFlo cages (figures 5 and ) attenuate aerodynamic noise in gaseous service. To help eliminate cavitation damage in a properly-sized valve, a standard-travel, Cavitrol III, one-stage cage (figure 9) and a long-travel, Cavitrol III, two-stage cage are available in the 1- through 8-inch Design ET control valve. Optional constructions allow material compatibility with NACE Standard MR Note Neither Emerson, Emerson Process Management, Fisher, nor any of their affiliated entities assumes responsibility for the selection, use and maintenance of any product. Responsibility for the selection, use, and maintenance of any product remains with the purchaser and end-user. Features Product Bulletin Compliance with the Clean Air Act ENVIRO-SEAL packing systems (figures 10 and 11) that provide an improved stem seal to help prevent the loss of process fluid are available. These packing systems feature PTFE or Graphite ULF packing with live-loading for reduced packing maintenance. PTFE Seating for Long-Lasting Shutoff Capability Controlled compression of standard seat construction protects PTFE disk between metal disk seat and disk retainer (figure ). Only the edge of the PTFE disk is contacted by the flowstream during normal operation. Excellent shutoff is maintained by a backup ring or spring-loading that forces the valve plug seal ring against the cage (figure ). Stable Control Rugged cage guiding stabilizes the valve plug at all points in its travel to reduce vibration, mechanical noise, and the need for hydraulic snubbers. Cost-Effective Operation and Maintenance Economy Increased wear resistance of hardened stainless steel trim means longer-lasting service. When inspection or maintenance is necessary, the body can stay in the pipeline during removal of trim parts. Balanced valve plug construction permits use of smaller, lower-cost actuators from Fisher. The Design ETR valve also permits easy body interior access without having to remove the bonnet or actuator (figure ). And, trim inventory costs are cut because dimensional standardization permits use of most standard easy-e trim parts. Compliance with European Standards Valves are available with dimensions specified by EN/DIN standards. See figure 1. Sour Environment Capability Materials are available for applications handling sour environments. These materials comply with the requirements of NACE MR

3 Product Bulletin ET Valve Table 1. Available Constructions BODY MATERIAL AND END CONNECTION STYLE (1) VALVE SIZE, Cast Iron Body Carbon Steel, Alloy Steel, or Stainless Steel Body DESIGN INCH Class 15 Class 50 RF or RTJ Flanged Butt Socket Screwed Screwed FF Flanged RF Flanged Class 150 Class 00 Class 00 Weld Weld ET EAT ETR 1, 1.5, or 1.5.5,,,, or 8 1 or,, or 1, 1.5, or 1.5.5,, or = Available Construction. 1. End connection style abbreviations: FF - Flat Faced, RF - Raised Face, RTJ - Ring Type Joint. Table. Shutoff Classifications Per ANSI/FCI 70- and IEC 05- Valve Design Seating Shutoff Class All except those with Cavitrol III cages PTFE Standard Air Test (maximum leakage is 0.05 ml/min/psid/inch port diameter) () Metal V (optional) VI (optional) () IV (standard) V (optional) (1) VI (optional) () ET with Cavitrol III one-stage cage Metal IV (standard) ET with Cavitrol III two-stage cages Metal V ET and EAT w/ TSO (Tight Shutoff) trim (Class 15 through 00) ET w/ TSO (Tight Shutoff) trim (Class 15 through 00) Replaceable, protected soft seat Std or Cavitrol III trim. Replaceable, protected soft seat. V (optional) TSO () TSO is not an ANSI leakage class. Valves with TSO trim are factory tested to a more stringent Fisher test requirement of no leakage at time of shipment. Test medium is water. Specify service P when ordering. Shutoff class V. 1. Class V shutoff requires spring-loaded seal ring, radius-seat plug, and wide-bevel seat ring (not available with 8-inch port, quick-opening cage). Not available with trims, 9, and 85.. This is a special non-ansi/fci leakage class.. For additional information, contact your Fisher sales office.. Refer to table. ENVIRO-SEAL, HIGH-SEAL Packing Systems The ENVIRO-SEAL and HIGH-SEAL packing systems from Fisher offer exceptional sealing capabilities. These systems easily install in existing valves or can be purchased with new valves. These systems help seal the process to conserve valuable process fluid. The long-life and reliability of these systems also reduce maintenance cost and downtime. For applications requiring compliance with environmental protection regulations, Fisher offers the unique ENVIRO-SEAL packing system (figure 11) and, for hazardous service, the ENVIRO-SEAL bellows seal system (figure 10). The patented emission control packing system keeps emission concentrations below the EPA 500 ppm requirement. For an excellent stem seal in applications that are not environmentally-sensitive, Fisher offers the HIGH-SEAL Graphite ULF packing system (figure 11). The HIGH-SEAL packing system provides improved sealing at pressure/temperature ratings beyond ENVIRO-SEAL limits. ENVIRO-SEAL packing systems, available with PTFE, Graphite ULF, or duplex packing, and the HIGH-SEAL Graphite ULF packing system feature live-loading and unique packing-ring arrangements for long-term, consistent sealing performance.

4 ET Valve Product Bulletin ANSI/FCI Class VI Shutoff Capabilities Design ET valves with soft seat and metal seat constructions can provide ANSI/FCI Class VI shut-off capabilities. See tables and. Table. Class VI Trim Materials TYPE ET CAGE/SEAT RING RETAINER S100 / ENC S100 / ENC S1700 (17-PH SST) S UHMWPE (Ultra High Molecular Weight Polyethylene) Table. Class VI Shutoff Availability (1) Type Port Size, Inches Seat Minimum Seat Load ET.75 7 Soft See Catalog 1 ET.75 7 Metal 00 lbs/lineal inch 1. Limited retrofit capability. Consult your Fisher sales office. VALVE PLUG SEAT RING SEAL RING S100 w/ standard beveled seat S100/CoCr-A seat w/ radiused seat (special design) S100 w/ standard beveled seat S100 w/ radiused seat (special design) TRIM TEMPERATURE LIMIT S100/PTFE UHMWPE (1) Elgiloy 198 to 5 to 150 S100 w/ wide beveled seat (special design) UHMWPE Elgiloy 198 to 5 to 150 S100/PTFE UHMWPE Elgiloy 9 to 0 to 150 S100 w/ wide beveled seat (special design) UHMWPE Elgiloy 9 to 0 to 150 C F

5 Product Bulletin ET Valve RETAINING RING LOAD RING SEAL RING METAL BACKUP RING W / IL W91 1 / IL W0995 / IL SEAL RING BONNET GASKET PTFE V-RING PACKING BONNET GASKET CAGE GASKET BACKUP RING SHIM SHIM SEAL RING VALVE PLUG SPIRAL WOUND GASKET RESTRICTED TRIM ADAPTORS SPIRAL WOUND GASKET PIN W001- / IL SEAT RING GASKET W1 / IL METAL DISK SEAT PTFE DISK METAL DISK RETAINER METAL SEAT RING W098- / IL Figure. Design ET Sectional with Standard Cages 5

6 ET Valve Product Bulletin W097- / IL W1557- / IL Figure. Design EAT Sectional Figure. Design ETR Sectional W980 / IL W851-1 / IL Figure 5. Typical Valve with WhisperFlo Aerodynamic Trim

7 Product Bulletin ET Valve W705 / IL Figure. Typical WhisperFlo Cage 7

8 ET Valve Product Bulletin Table 5. Typical Combinations of Metal Trim Parts for All Valves Except Those for NACE Specification (1), Cavitrol III (), -Inch Whisper Trim III (), and -, -, and 8-Inch WhisperFlo Cages () Trim Designation Valve Plug Cage 1 (typically used with optional metal-seat constructions in all designs and body materials except CF8M) S100 hardened to 8 HRC S (standard for CF8M bodies in all designs regardless of seat construction) 7 and 7H (trim 7H has clearances for high-temperature service above 10 C [10 F]) 57 (standard for standard PTFE-seat Designs ET, EAT, ETR in all body materials except CF8M) S1700 hardened to 0 HRC (5) S100 with seat and guide hard faced with CoCr-A hardfacing alloy S100 with seat and guide hard faced with CoCr-A hardfacing alloy S100 with seat hard faced with CoCr-A hardfacing alloy S100 S100 with seat and guide hard faced with CoCr-A S100 hardened to 8 HRC 1. For NACE specification trims, see table 17. For Cavitrol III trims, see table.. For -inch Whisper Trim III trims with 5.75 inch port diameter, see table 8. CA15 is used for - and 8-inch full-sized and restricted-trim valves. 5. For 8-inch Whisper Trim I and 8-inch Whisper Trim III... For -, -, and 8-Inch WhisperFlo trims, see table 7. CB7Cu-1 hardened to 0 HRC CB7Cu-1 hardened to HRC (5) Disk Seat and Retainer for Standard PTFE-Seat Construction Seat Ring or Liner for Optional Metal-Seat Construction S100 or CA15 () (10 stainless steel), both hardened to 8 HRC Optional Liner (Metal Seat Design EAT Body Only) S100 hardened to 8 HRC R000 (alloy ) R000 (alloy ) CB7Cu-1 hardened to 0 HRC CF8M with electroless nickel coating (ENC) CF8M with electroless nickel coating (ENC) CF8M with electroless nickel coating (ENC) CB7Cu-1 hardened to 0 HRC S1700 hardened to 0 HRC S100 S100 S100 S100 disk retainer with CoCr-A disk seat S100 disk retainer with CoCr-A disk seat R000 (alloy ) R000 (alloy ) S100 S100 S100 S100 disk retainer with CoCr-A disk seat Seat Ring: R000 (alloy ) S100 8

9 Product Bulletin ET Valve Table. Cavitrol III (1) Metal Trim Part Materials and Body/Trim Temperature Capabilities MATERIAL TEMPERATURE BODY & BONNET TRIM VALVE CAGE SEAT CAPABILITY CAGE DESIGNATION PLUG RETAINER RING C F Minimum Maximum Minimum Maximum 7 Heat-treated S000 S100 S1700 stainless steel with H900 heat-treat t t condition 1. Available only in 1- through 8-inch Design ET valves. S1700 with H900 heat-treat condition WCC carbon steel, WC9 chrome moly steel, or LCC/HT carbon steel CF8M 1, 1.5, or in. body size.5 or in. body size,, or 8 in. body size 9 These materials not limiting factors 9 These materials and sizes not limiting factors 0 These materials not limiting factors 0 These materials and sizes not limiting factors Table 7. WhisperFlo Metal Trim Part Materials and Valve Body/Trim Temperature Capabilities (-, -, and 8-inch Design ET only) TRIM MATERIAL TEMPERATURE CAPABILITY (1) VALVE VALVE CAGE DESIGNA- CAGE SEAT C F BODY PLUG RETAINER TION Min Max Min Max 901 WCC S100 S1000 WCC ENC S WCC 9 WCC 9 1 CF8M S100/CoCrA Seat and Guide S100/CoCrA Seat and Guide S100/CoCrA Seat and Guide S1000 WCC ENC S100/CoCrA S1000 NACE WCC/NACE/ENC S100/CoCrA S10/ R1 S100/ENC S100/CoCrA Temperatures above C (50 F) require PEEK anti-extrusion rings and spring-loaded seal ring. This option allows Design ET construction to be used up to 1 C (00 F) for non-oxidizing service and 0 C (500 F) for oxidizing service. 9

10 ET Valve Product Bulletin Table 8. Whisper Trim III Metal Trim Part Materials and Body/Trim Temperature Capabilities (-inch Design ET with 5.75 inch port only) Trim Cage Baffle (For Level Disk Seat and Retainer Seat Ring for Metal-Seat Body Bonnet, Material Temperature Capability Designation Valve Plug Cage Retainer D Cage for Construction & Bonnet Only) PTFE-Seat Construction Spacer C F 01 (standard for all body materials except CF8M) S1700 hardened to 0 HRC S100 hardened to 8 HRC Carbon steel NACE with electroless p ) nickel coating (ENC) 01C (for soft seats) S1700 hardened to 0 HRC 0 S100 with seat and guide hard-faced with CoCr-A C 1 (for level D NACE) 1C 1 (NACE compatible) S100 with seat and guide hard-faced with CoCr-A C S100 with seat and guide hard-faced with CoCr-A C S100 with seat and guide hard-faced with CoCr-A C 1C (NACE S100 with compatible) seat and (for soft seats) guide hard-faced with CoCr-A C S100 hardened to 8 HRC S100 hardened to 8 HRC S100 with electroless nickel coating (ENC) S100 with electroless nickel coating (ENC) S100 with electroless nickel coating (ENC) S100 with electroless nickel coating (ENC) Carbon steel NACE with electroless nickel coating (ENC) Carbon steel NACE with electroless nickel coating (ENC) S100 with electroless nickel coating (ENC) S100 with electroless nickel coating (ENC) Carbon steel NACE with electroless nickel coating (ENC) Carbon steel NACE with electroless nickel coating (ENC) Steel S1000 hardened to 8 HRC WCC carbon steel or WC9 chrome moly steel CF8M (1 SST) Steel S100 WCC carbon steel or WC9 chrome moly steel CF8M (1 SST) Steel S100 with seat hard-faced with CoCr-A S100 S100 with seat hard-faced with CoCr-A WCC carbon steel or WC9 chrome moly steel CF8M (1 SST) WCC carbon steel or WC9 chrome moly steel CF8M (1 SST) S100 S100 WCC carbon steel or WC9 chrome moly steel CF8M (1 SST) Steel S100 with seat hard-faced with CoCr-A WCC carbon steel or WC9 chrome moly steel CF8M (1 SST) Steel S100 WCC carbon steel or WC9 chrome moly steel CF8M (1 SST) 9 to 0 to 1 (1) 00 (1) 9 to 1 0 to 5 9 to 0 0 to 00 9 to 1 0 to 5 9 to 0 to 1 (1) 00 (1) 9 to to 50 9 to 0 to 0 (1) 500 (1) 198 to 5 to 1 (1) 00 (1) 9 to 0 to 0 (1) 500 (1) 5 to 198 to 1 (1) 00 (1) 9 to 0 0 to 00 0 to 9 to 1 (1) 00 (1) 9 to 0 0 to 00 9 to 0 0 to Temperatures above C (50 F) require PEEK anti-extrusion rings and spring-loaded seal ring. This option allows Design ET construction to be used up to 1 C (00 F) for non-oxidizing service and 0 C (500 F) for oxidizing service. 10

11 Product Bulletin ET Valve BONNET SPACER CAGE RETAINER W70 / IL Figure 7. Metal Seat and Whisper Trim III Cage in -Inch Design ET Valve W7A- / IL Figure 9. Cavitrol III One-Stage Cage BELLOWS SEAL BONNET VALVE PLUG SEAL BELLOWS SEAL ASSEMBLY WITH VALVE PLUG W700-1 / IL PROTECTED SOFT SEAT W581-1 / IL Figure 8. Typical Balanced TSO Trim Figure 10. Typical ENVIRO-SEAL Bellows Seal Bonnet and Bellows Seal Assembly 11

12 ET Valve Product Bulletin PACKING BO STUD PACKING BO STUDS SPRING SPRINGS PACKING FOLLOWER ANTI ETRUSION RING LANTERN RING PACKING RING VALVE BONNET W85 1 W580 / IL PACKING BO STUD SPRINGS FOLLOWER PACKING W85-1 W / IL Figure 11. ENVIRO-SEAL and HIGH-SEAL Packing Systems 1

13 Product Bulletin ET Valve PRESSURE DROP, PSI PRESSURE DROP, PSI A7-/IL FLUID TEMPERATURE, C FLUID TEMPERATURE, F FLUID TEMPERATURE, C OR 1 OR H , OR FLUID TEMPERATURE, F PRESSURE DROP, PSI O R 9 9 OR 57 FLUID TEMPERATURE, C OR FLUID TEMPERATURE, F PRESSURE DROP, BAR PRESSURE DROP, BAR PRESSURE DROP, BAR PRESSURE DROP, PSI PRESSURE DROP, PSI FLUID TEMPERATURE, C OR OR 7H FLUID TEMPERATURE, F FLUID TEMPERATURE, C , FLUID TEMPERATURE, F NOTES: 1 USE TRIM 7 INSTEAD OF TRIM 9 FOR NONLUBRICATING FLUIDS SUCH AS SUPERHEATED STEAM OR DRY GASES BETWEEN 19 C (00 F) AND C (50 F). DO NOT ECEED THE MAIMUM PRESSURE AND TEMPERATURE FOR THE CLASS RATING OF THE BODY MATERIAL USED, EVEN THOUGH THE TRIMS SHOWN MAY HAVE HIGHER CAPABILITIES. TRIMS AND 9 MAY BE USED UP TO 99 BAR (10 PSI) WITH CLEAN DRY GAS. FOR PROCESS FLUIDS OTHER THAN CLEAN DRY GAS, USE TRIMS AND 9 ONLY UP TO 1 BAR (00 PSI). TRIMS, 1, 7, AND 7H TEMPERATURE LIMITS CAN BE ETENDED TO 1 C (00 F) FOR NON-OIDIZING SERVICE OR 0 C (500 F) OIDIZING SERVICE IF PEEK ANTI-ETRUSION RINGS ARE USED WITH SPRING-LOADED SEAL RINGS. 5 USE TRIM 7H INSTEAD OF TRIM 7 FOR TEMPERATURES ABOVE 10 C (10 F). REQUIRES ANTI-ETRUSION RINGS AND SPRING-LOADED SEAL RINGS FOR TEMPERATURES ABOVE C (50 F). PRESSURE DROP, BAR PRESSURE DROP, BAR Figure 1. Typical Trim for All Valves Except Those with Cavitrol III, Whisper Trim III, or WhisperFlo Cages 1

14 ET Valve Product Bulletin LIQUID TEMPERATURE, C PRESSURE DROP, PSI LIQUID TEMPERATURE, F PRESSURE DROP, BAR 1 NOTES: 1 DO NOT ECEED THE MAIMUM PRESSURE AND TEMPERATURE FOR THE CLASS RATING OF THE BODY MATERIAL USED, EVEN THOUGH THE TRIM SHOWN MAY HAVE HIGHER CAPABILITIES. TRIM 7 TEMPERATURE LIMITS CAN BE ETENDED TO 1 C (00 F) FOR NON-OIDIZING SERVICE OR 0 C (500 F) FOR OIDIZING SERVICE IF PEEK ANTI-ETRUSION RINGS ARE USED WITH SPRING-LOADED SEAL RINGS. A77/IL Figure 1. Typical Trim for Cavitrol III Cage Constructions PRESSURE DROP, PSI FLUID TEMPERATURE, C C PRESSURE DROP, BAR FLUID TEMPERATURE, F FLUID TEMPERATURE, F 1 NOTES: 1 DO NOT ECEED THE MAIMUM PRESSURE AND TEMPERATURE FOR THE CLASS RATING OF THE BODY MATERIAL USED, EVEN THOUGH THE TRIMS SHOWN MAY HAVE HIGHER CAPABILITIES. TRIMS 01 AND 1 TEMPERATURE LIMITS CAN BE ETENDED TO 1 C (00 F) FOR NON-OIDIZING SERVICE OR 0 C (500 F) FOR OIDIZING SERVICE IF PEEK ANTI-ETRUSION RINGS ARE USED WITH SPRING-LOADED SEAL RINGS. A78/IL PRESSURE DROP, PSI FLUID TEMPERATURE, C , 1C Figure 1. Typical Trim for -Inch Design ET Valve with Whisper Trim III Cage PRESSURE DROP, BAR 1

15 Product Bulletin ET Valve Table 9. Materials and Temperature Limits for Other Parts PART MATERIAL TEMPERATURE CAPABILITIES C F Minimum Maximum Minimum Maximum Cast iron body Cap screws Steel SAE Grade Studs Steel SA-19-B7 WCC body 9 0 Nuts Steel SA-19-H Studs Steel SA-19-B7 LCC/HT body 50 Nuts Steel SA-19-H (5) Body-to-bonnet t Steel SA-19-B7 (std) (NACE MR bolting. See table Studs 8 [non-exposed bolting]) 55 (5) 18 for NACE bolting materials Steel SA-19-H (std) (NACE MR Nuts [non-exposed bolting]) 50 (5) and temperature CF8M limits (1 stainless steel) Studs 0 stainless steel SA-0-B8 Nuts 0 stainless steel SA (5) 100 body 1 stainless steel SA-19-B8M Studs (strain-hardened) or 1 stainless steel SA-19-B8M (5) (5) (5) (5) Nuts 1 stainless steel SA-19-8M Disk PTFE Fluoroelastomer (1) piece valve plug Ethylene-propylene () seal (standard for 1- thru -inch Backup ring For use with air and hydrocarbons valves except Nitrile () those with For use with other compatible Cavitrol III cage) fluids Seal ring Carbon-filled PTFE Backup 1 stainless steel 9 (5) 0 (5) ring () 1 stainless steel Spring-loaded valve plug seal (7) Retaining ring () 0 stainless steel (N07750, NACE Std) (5) (5) (5) (5) Seal ring PTFE with Hastelloy C spring Backup 1 stainless steel 9 (5) 0 (5) For applications ring () 1 stainless steel using PEEK Retaining Anti-Extrusion ring () 0 stainless steel (5) (5) (5) Rings: Spring-loaded Seal ring PTFE/graphite with Hastelloy C spring 1 () () valve plug seal Anti-extrusion rings PEEK (PolyEtherEtherKetone) (5) (5) Valve plug stem S100 (S0910, NACE Std.) Load ring (8-inch Design ET valve only) 17- PH stainless steel or (5) (5) (5) (5) optional Inconel or K-Monel Cast iron Restricted t trim adaptors WCC steel 9 (5) 0 (5) 1 stainless steel (5) (5) Seat ring, bonnet FGM (standard) (5) (5) and cage gaskets PTFE-coated Monel (5) 19 (5) 00 Inconel 00/graphite (FGM-standard) (5) (5) Spiral wound Monel/composition gasket Monel/PTFE Shim 1 stainless steel Monel (5) (5) (5) (5) (temperatures See table 11 PTFE V-ring Packing shown are material for proper temperature bonnet PTFE/composition capabilities) selection Graphite ribbon/filament (5) (5) -continued- 15

16 ET Valve Product Bulletin Table 9. Materials and Temperature Limits for Other Parts (continued) TEMPERATURE CAPABILITIES PART MATERIAL C F Minimum Maximum Minimum Maximum Packing flange, studs, and nuts when used with standard bonnet 1 stainless steel (5) (5) Metal packing box parts 1 or 17-PH stainless steel depending on part (5) (5) Extension Trims 1 & 1 stainless steel 9 (5) 0 (5) bonnet bushing Other trims 1 stainless steel (5) (5) 1. For high-temperature air, hydrocarbons, and certain other chemicals and solvents. Not for use with steam or ammonia. Not recommended for water above 8 C (180 F).. Has excellent moisture resistance to hot water and steam and may be used with most fire-resistant hydraulic oils, but cannot be used with petroleum-based fluids and other hydrocarbons.. Cannot be used with fire-resistant hydraulic oils.. These parts not used with 17 mm (7 inch) ports or larger. 5. These materials not limiting factors.. This material may be used in temperatures up to 0 C (500 F) for oxidizing service. 7. Standard for 8-inch valve regardless of cage and all 1- thru -inch valves with Cavitrol III cages, optional in 1- thru -inch valves with other than Cavitrol III cages. Table 10. Design ET Valve Body/Trim Temperature Capabilities For All Valves Except Cavitrol III, -Inch Design ET with Whisper Trim III Cage, and -, -, and 8-Inch Design ET with WhisperFlo Cage MATERIAL TEMPERATURE CAPABILITY BODY/BONNET () TRIM VALVE SIZE AND DESIGN C F MATERIALS DESIGNATION Min Max Min Max 1,, 7, 9, or 57 All Cast iron 7 All H All All 9 1 (1) 0 00 (1) WCC steel WC9 chrome moly steel 7 All 9 1 (1) 0 00 (1) 9 All 9 19 () 0 00 () 7 All H All 10 1 (1) (1) 57 All or All 9 1 (1) 0 00 (1) 7 All 9 1 (1) 0 00 (1) 9 All 9 19 () 0 00 () 7 All H All 10 1 (1) (1) 57 All All 9 1 (1) 0 00 (1) All All 1 (1) (1) LCC/HT steel 9 All 19 () () 7 All H All 10 1 (1) (1) 57 All All 198 () 1 (1) 5 () 00 (1) CF8M (1 stainless 8 All 198 () 19 () 5 () 00 steel) () 9 All 198 () 19 () 5 () 00 () 1. Temperatures above C (50 F) require PEEK anti-extrusion rings and spring-loaded seal ring. This option allows Design ET construction to be used up to 1 C (00 F) for non-oxidizing service and 0 C (500 F) for oxidizing service.. Lubricating service allows usage to C (50 F). Same material also used for bottom flange, if required. Restricted trim and full-sized limits are the same.. May be used down to 5 C ( 5 F) if manufacturing process includes Charpy impact test. 1

17 Product Bulletin ET Valve Table 11. Bonnet Selection Guidelines BONNET STYLE PACKING MATERIAL IN-BODY PROCESS TEMPERATURE LIMITS (1) Plain: PTFE V-ring 18 to 0 to 50 Standard for all valves through -inch valve size with -1/1 yoke boss diameter PTFE/Composition 18 to 0 to 50 Standard for -inch and 8-inch valves in cast iron and WCC steel bonnet material with -9/1 yoke 0 to maximum shown 0 to maximum shown Graphite ribbon/filament boss diameter in table 9 in table 9 Style 1 Cast Extension: PTFE V-ring Standard for 8-inch valves in S100 bonnet PTFE/Composition to 50 to 50 material with -9/1 yoke boss diameter Graphite ribbon/filament to 18 and above () 50 to 0 and above 50 () Style Cast Extension: Optional for -inch through -inch valve sizes with -1/1 inch yoke boss diameter Optional for -inch and 8-inch valves with -9/1 yoke boss diameter. Not available for 8-inch valve in S100 bonnet material ENVIRO-SEAL bellows seal bonnet PTFE V-ring PTFE/Composition C 101 to 150 to 50 Graphite ribbon/filament 101 to 18 and above () 150 to 0 and above 50 () PTFE Graphite ULF F For exceptional stem sealing capabilities. See Bulletin 59.1:070, ENVIRO-SEAL Bellows Seal Bonnets, for pressure/temperature ratings. For exceptional stem sealing capabilities. See Bulletin 59.1:070, ENVIRO-SEAL Bellows Seal Bonnets, for pressure/temperature ratings. 1. These in-body process temperatures assume an outside, ambient temperature of 1 C (70 F). When using any packing at low process temperatures, a cast extension bonnet may have to be used to prevent packing damage which could result from the formation of valve stem frost.. Temperatures above C (50 F) require PEEK anti-extrusion rings and spring-loaded seal ring. Table 1. Maximum Flow Coefficients for Full-Sized Trim with Equal Percentage Cage and Normal Flow Direction Valve Design Valve Size, Inch Cv at Max. Valve Plug Travel ET EAT with liner without liner ETR 1. With 51 mm ( inch) travel.. With 7 mm ( inch) travel. 1, (1) 8 () 1 1 1,

18 ET Valve Product Bulletin Table 1. Port Diameters and Valve Plug Travel VALVE SIZE, INCH Design ET or ETR Design EAT Restricted- Full-Sized Trim Capacity Trim Full-Sized Trim Restricted- Capacity Trim 1 or PORT DIAMETER (1) MAIMUM VALVE PLUG TRAVEL (1) mm Inch mm Inch () 7 () 51 () () () 1.5 () 5.75 () 7 () () 8 () For Cavitrol III trim, see table 15.. Not available in Design ETR valves.. Standard-travel cages.. Whisper Trim III cages Table 1. Stem and Yoke Boss Diameters VALVE SIZE, INCH STEM AND YOKE BOSS DIAMETERS Design ET or ETR Design EAT Standard Optional Full-Sized Trim 1 or Restricted- Restricted- Stem Yoke Boss Stem Yoke Boss Capacity Trim Full-Sized Trim Capacity Trim mm Inch mm Inch mm Inch mm Inch /8 1/ /8 1/ 1/ 1/ 1/ /8-1/1-1/8-1/1-1/1-1/1-1/ / 71-1/1 (1) 8 (1) 1. Not available in Design ETR valves / 90-9/ / 1/ / / / /1-1/1-9/1-9/1-9/ / 90-9/ or 1 or /

19 Product Bulletin ET Valve Table 15. Port Diameters and Valve Plug Travel for Cavitrol III Cage DESIGN ET ONE-STAGE CAGE TWO-STAGE CAGE VALVE SIZE, INCH Port Diameters Valve Plug Travel (1) Port Diameters Valve Plug Travel mm 1 or Inch 1 or The travel listed is the maximum travel that can be obtained for the given size. In situations where increased valve capacity is not needed, standard Design ET valve travels should be utilized in selecting the actuator. 19

20 ET Valve Product Bulletin Table 1. Port Diameters, Valve Plug Travel, Yoke Boss Diameters for TSO (Tight Shutoff) Trim MA TRAVEL YOKE BOSS SIZE PORT DIAMETER VALVE TYPE TRIM Nominal Actual TSO mm Inch mm Inch mm Inch mm Inch ET -Inch CAV III Stage 7. ET -Inch CAV III Stage 10 EAT -Inch Std /1 5-9/1 5-1/1-9/1 C V REDUCTION AT 100% TRAVEL (1) % % EAT -Inch Std / This column lists the percent reduction of published maximum C V of the trim listed in the TRIM column. % % % (linear) % (equal percent) FLUID TEMPERATURE, C FLUID TEMPERATURE, C PRESSURE DROP, PSI C 85C FLUID TEMPERATURE, F PRESSURE DROP, BAR PRESSURE DROP, PSI FLUID TEMPERATURE, F PRESSURE DROP, BAR NOTES: 1 USE TRIM 87 INSTEAD OF TRIM 85 FOR NONLUBRICATING FLUIDS SUCH AS SUPER-HEATED STEAM OR DRY GASES BETWEEN 19 C (00 F) AND C (50 F). DO NOT ECEED THE MAIMUM PRESSURE AND TEMPERATURE FOR THE CLASS RATING OF THE BODY MATERIAL USED, EVEN THOUGH THE TRIMS SHOWN MAY HAVE HIGHER CAPABILITIES. TRIM 85 MAY BE USED UP TO 99 BAR (10 PSI) WITH CLEAN DRY GAS. FOR PROCESS FLUIDS OTHER THAN CLEAN DRY GAS, USE TRIM 85 ONLY UP TO 1 BAR (00 PSI). TRIM 87 TEMPERATURE LIMITS CAN BE ETENDED TO 1 C (00 F) FOR NON-OIDIZING SERVICE OR 0 C (500 F) FOR OIDIZING SERVICE IF PEEK ANTI-ETRUSION RINGS ARE USED WITH SPRING-LOADED SEAL RINGS. A79-1/IL Figure 15. Typical Trim for NACE MR (Sour Service) 0

21 Product Bulletin ET Valve Table 17. Metal Trim Part Materials for Compatibility with NACE MR (Sour Service) Specifications. Environmental Restrictions Apply, Refer to Standard. Trim Designation () Valve Plug Cage 85 S100 85C () 8 87 (Also used for 8-inch Whisper Trim I) 87C () (Also used for 8-inch Whisper Trim I) S100 S100 with seat hard faced with CoCr-A hardfacing alloy S100 with seat and guide hard faced with CoCr-A hardfacing alloy S100 with seat and guide hard faced with CoCr-A hardfacing alloy S100 with electroless nickel coating (ENC) S100 with electroless nickel coating (ENC) S100 with electroless nickel coating (ENC) 1. 8-inch valve body only.. 85C and 87C are trims for PTFE-seat construction.. 8-inch Whisper Trim I cage is CB7CU-1, double H1150 (NACE) / ENC.. N07750 retaining ring is standard for spring-loaded seal ring construction. Seat Ring for Standard Metal Seat Construction Optional Liner for Metal Seat (EAT only) Disk Seat and Retainer for Optional PTFE-Seat Construction S100 S100 S100 Valve Stem, Packing Follower, Lantern Ring, Packing Box Ring, and Pin R000 (alloy ) S0910 (Valve Stem) S100 (All Other Parts) S100 with electroless nickel coating R000 (alloy ) (ENC) () S100 with electroless nickel coating S100 (ENC) () Table 18. Bolting Materials and Temperature Limits for Bolting Compliance with NACE MR VALVE BODY MATERIAL TEMPERATURE CAPABILITIES Load Ring (1) N05500 (K-Monel) BOLTING MATERIAL C F Min Max Min Max NACE MR (non-exposed bolting) (Standard) WCC and Studs Steel SA-19-B7 CF8M 8 () 7 55 () 800 (1 SST) Nuts Steel SA-19-H NACE MR (exposed bolting) (Optional) May require derating of valve (1) when these body-to-bonnet bolting materials are used WCC and Studs Steel SA-19-B7M 8 CF8M Nuts Steel SA-19-HM () 7 55 () Derating is not required for Class 150 and 00 valves. Derating may be required for valves rated at Class 00. Contact your Fisher sales office for assistance in determining the derating of valves when these body-to-bonnet bolting materials are used.. 9 C ( 0 F) with WCC body material. 1

22 ET Valve Product Bulletin Table 19. Design ET and ETR Dimensions VALVE SIZE, INCH Scrd or SW FF or 150 RF RTJ A Class, End Connection Style (1) 50 RF or 00 RF RTJ BW or 00 RF mm Inch RTJ DIN PN1-0 () DIN PN-100 () See See See mm above See mm above Design ET G (MA) Design ETR 1. End connection style abbreviations: BW - Buttwelding, FF - Flat Faced, Scrd - Screwed, SW - Socketweld, RF - Raised Face, RTJ - Ring Type Joint. Valves which meet DIN flange standards and have DIN face-to-face dimensions are available only from Europe. Valves which meet DIN flange standards but not DIN face-to-face standards are available in the US. Consult your Fisher sales office MATCH LINE FOR ACTUATOR MATCH LINE FOR ACTUATOR D D NOTES: 1 B A G NOTES: 1 B A G. FOR DIMENSIONS OF VALVES WITH OTHER END CONNECTIONS, CONSULT YOUR FISHER SALES OFFICE. 1 B A. FOR DIMENSIONS OF VALVES WITH OTHER END CONNECTIONS, CONSULT YOUR FISHER SALES OFFICE. 1 B A AR97 a A095 / IL 10A797 B A09 / IL Figure 1. Design ET and ETR Dimensions (also see tables 19, 0, and 1)

23 Product Bulletin ET Valve Table 0. Design ET and ETR Dimensions D FOR PLAIN BONNET VALVE Design ET Except Design ET Design ETR SIZE, with Cavitrol III Two-Stage Cage with Cavitrol III Two-Stage Cage INCH Stem Diameter, mm Stem Diameter, mm Stem Diameter, mm or or or (1) () 8 1 or (1) ( ) () Stem Diameter, Inch Stem Diameter, Inch Stem Diameter, Inch /8 1/ / 1 or 1-1/ /8 1/ / 1 or 1-1/ /8 1/ / () All except Whisper Trim III and WhisperFlo cages.. Whisper Trim III and WhisperFlo cages.. Available only in cast iron or WCC steel for the stem diameter with plain bonnet. Table 1. Design ET and ETR Dimensions D FOR ETENSION AND ENVIRO-SEAL BELLOWS SEAL BONNETS (DESIGN ET ONLY, ECEPT WITH CAVITROL III CAGE) VALVE ENVIRO-SEAL Bellows Seal Style 1 Ext. Bonnet Style Ext. Bonnet SIZE, Bonnet INCH Stem Diameter Stem Diameter Stem diameter mm or or (1) () 8 1 or (1) () Inch /8 1/ / 1 or 1-1/ /8 1/ / /8 1/ / Standard-travel cages.. Whisper Trim III and WhisperFlo cages

24 ET Valve Product Bulletin Table. Design EAT Dimensions (1) VALVE AA SIZE, Class 150 Class 00 Class 00 IN. RF RTJ RF RTJ BW, SW or RF RTJ mm Inch End connection style abbreviations: BW - Buttwelding, FF - Flat Faced, Scrd - Screwed, SW - Socketweld, RF - Raised Face, RTJ - Ring Type Joint. Table. Design EAT Dimensions VALVE SIZE, IN. 1 1 Plain Bonnet Stem Diameter, mm DD 5. or Style 1 Extension Bonnet Stem Diameter, mm Stem Diameter, In. Stem Diameter, In. /8 1/ / 1 or 1-1/ /8 1/ / MATCH LINE FOR ACTUATOR NOTE: FOR DIMENSIONS OF VALVES WITH DIN (OR OTHER) END CON NECTIONS, CONSULT YOUR FISHER SALES OFFICE. AU190 A A097 1 / IL AA Figure 17. Design EAT Dimensions (also see tables,, and ) DD AA Table. Design EAT Dimensions DD VALVE SIZE, Style Extension Bonnet ENVIRO-SEAL Bellows Seal Bonnet IN. Stem Diameter, mm Stem Diameter, mm Stem Diameter, In. Stem Diameter, In. /8 1/ / /8 1/ /

25 Product Bulletin ET Valve Ordering Information Inlet pressure and temperature must always be limited by the applicable ANSI pressure/temperature rating. Pressure drop information for various trim material combinations is provided in figures 1, 1, and 15. The maximum allowable pressure drop for the application must not exceed the lowest value indicated for the combination of materials selected. When ordering, specify: Application Information 1. Type of application: a. Throttling or on-off b. Reducing or relief. Controlled fluid (include chemical analysis of fluid if possible). Specific gravity of controlled fluid. Fluid temperature 5. Inlet pressures: a. Minimum b. Normal c. Maximum. Pressure drops: a. Minimum flowing drop b. Normal flowing drop c. Maximum flowing drop d. Maximum at shutoff 7. Flow rates: a. Minimum controlled flow b. Normal flow c. Maximum flow 8. Maximum permissible noise level, if critical 9. Shutoff classification required 10. Valve stem diameter and bonnet type (plain, extension, or ENVIRO-SEAL bellows seal bonnet) 11. Line size and schedule Valve Information To determine what valve ordering information is needed, refer to the specifications. Review the description for each specification and in the referenced tables; write down your choice whenever there is a selection to be made. Always specify the valve design letter designation. Actuator and Accessory Information Refer to the specific actuator and accessory bulletins for required ordering information. 5

26 ET Valve Product Bulletin Coefficients Table 5. Design EAT, Quick Opening Cage, With Liner Quick Opening With Liner Characteristic Maximum Coeffs. Valve Port Diameter Travel (1) Flow for Valve Opening Percent of Total Travel Size, Coeffi- mm F () L Inches cient (0.5 in) mm Inches mm Inches Travel () C v K v T C v K v T C v () () K v T C v K v T C v () () K v T C v K v T C v () () K v T C v K v T C v () () K v T When using Type 55-EAT as a control valve for on-off service, the maximum travel for sizing purposes is 19 mm (0.75 inch).. When sizing self-operated regulators, use coefficients listed for mm (0.5 inch) travel.. At 100% travel.. Restricted trim.

27 Product Bulletin ET Valve Table. Design EAT, Quick Opening Cage, Without Liner Quick Opening Without Liner Characteristic Maximum Coeffs. for Valve Port Diameter Travel (1) Flow mm Valve Opening Percent of Total Travel Size, Coeffi- (0.5 in) Inches mm Inches mm Inches cient Travel () F () L C v K v T C v K v T C v () () K v T C v K v T C v () () K v T C v K v T C v () () K v T C v K v T C v () () K v T When using Type 55-EAT as a control valve for on-off service, the maximum travel for sizing purposes is 19 mm (0.75 inch).. When sizing self-operated regulators, use coefficients listed for mm (0.5 inch) travel.. At 100% travel.. Restricted trim. 7

28 ET Valve Product Bulletin Table 7. Design EAT, Linear Cage, With Liner Linear With Liner - Flow Down Characteristic Valve Maximum Port Diameter Flow Size, Travel Coeffi- Valve Opening Percent of Total Travel F (1) L Inches mm Inches mm Inches cient C v K v T C v K v T C v () () K v T C v K v T C v () () K v T C v K v T C v () () K v T C v K v T C v () () K v T At 100% travel.. Restricted trim. 8

29 Product Bulletin ET Valve Table 8. Design EAT, Linear Cage, Without Liner Linear Without Liner - Flow Down Characteristic Valve Port Maximum Flow Size, Diameter Travel Coeffi- Valve Opening Percent of Total Travel F (1) L Inches mm Inches mm Inches cient C v K v T C v K v T C v () () K v T C v K v T C v () () K v T C v K v T C v () () K v T C v K v T C v () () K v T At 100% travel.. Restricted trim. 9

30 ET Valve Product Bulletin Table 9. Design EAT, Equal Percentage Cage, With Liner Equal Percentage With Liner - Flow Down Characteristic Valve Port Maximum Flow Size, Diameter Travel Coeffi- Valve Opening Percent of Total Travel F (1) L Inches mm Inches mm Inches cient C v K v T C v K v T C v () () K v T C v K v T C v () () K v T C v K v T C v () () K v T C v K v T C v () () K v T At 100% travel.. Restricted trim. 0

31 Product Bulletin ET Valve Table 0. Design EAT, Equal Percentage Cage, Without Liner Equal Percentage Without Liner - Flow Down Characteristic Valve Port Maximum Flow Size, Diameter Travel Coeffi- Valve Opening Percent of Total Travel F (1) L Inches mm Inches mm Inches cient C v K v T C v K v T C v () () K v T C v K v T C v () () K v T C v K v T C v () () K v T C v K v T C v () () K v T At 100% travel.. Restricted trim. 1

32 ET Valve Product Bulletin Table 1. Design EAT, Whisper Trim I Cage Whisper Trim I - Flow Up Valve Size, Port Diameter Maximum Travel Inches mm Inches mm Inches Linear Characteristic Flow Coeffi- Valve Opening Percent of Total Travel cient C v K v T C v K v T C v K v T C v K v T C v K v T

Fisher ET, EAT, and ETR Sliding-Stem Control Valves

Fisher ET, EAT, and ETR Sliding-Stem Control Valves ET Valve D Product Bulletin Fisher ET, EAT, and ETR Sliding-Stem Control Valves Fisher ET, EAT, and ETR general-purpose control valves (figures,, and ) are used for throttling or on-off control of a wide

More information

Fisher ES and EAS Sliding-Stem Control Valves

Fisher ES and EAS Sliding-Stem Control Valves Fisher ES and EAS Sliding-Stem Control Valves Fisher ES and EAS general-purpose control valves (figures and ) are used for throttling or on-off control of a wide variety of liquids and gases. Both valve

More information

Fisher EW Series (EWD/EWS/EWT) Sliding-Stem Control Valves through NPS 12x8

Fisher EW Series (EWD/EWS/EWT) Sliding-Stem Control Valves through NPS 12x8 Product Bulletin D100023X012 Fisher EW Series (EWD/EWS/EWT) Sliding-Stem Control Valves through NPS 128 EW Valve Fisher EW Series easy-e valves (figures 1, 2, 3, 4, and 5) feature large internal cavities

More information

EW Series (Designs EWD/EWS/EWT) Sliding-Stem Control Valves through 10 x 8- and 12 x 8-Inch Sizes

EW Series (Designs EWD/EWS/EWT) Sliding-Stem Control Valves through 10 x 8- and 12 x 8-Inch Sizes Product Bulletin EW Valve EW Series (Designs EWD/EWS/EWT) Sliding-Stem Control Valves through 10 8- and 12 8-Inch Sizes The EW Series easy-e valves (figures 1, 2, 3, 4, and 5) feature large internal cavities

More information

Fisher YD and YS Control Valves

Fisher YD and YS Control Valves Product Bulletin D100031X012 Fisher YD and YS Control Valves Fisher YD (figure 1) and YS three-way cage-guided valves are designed for throttling or flow-switching (on-off) service, and are available in

More information

Fisher ED, EAD, and EDR Sliding-Stem Control Valves

Fisher ED, EAD, and EDR Sliding-Stem Control Valves ED Valve D00070 Product Bulletin Fisher ED, EAD, and EDR Sliding-Stem Control Valves Fisher ED, EAD, and EDR single-port control valves shown in figures,, and have balanced valve plugs, cage guiding, and

More information

Fisher ED, EAD, and EDR Sliding-Stem Control Valves

Fisher ED, EAD, and EDR Sliding-Stem Control Valves ED Valve D00070 Product Bulletin Fisher ED, EAD, and EDR Sliding-Stem Control Valves Fisher ED, EAD, and EDR single-port control valves shown in figures,, and have balanced valve plugs, cage guiding, and

More information

Fisher HP Series Control Valves

Fisher HP Series Control Valves Product Bulletin D0635X0 Fisher HP Series Control s HP (Globe ) HPA (Angle ) Balanced High-Temperature Trim Balanced Tight Shutoff Trim Unbalanced Trim Fisher HP Series control valves (figure ) are single-port,

More information

Fisher YD and YS Control Valves

Fisher YD and YS Control Valves YD and YS Valves Product Bulletin Fisher YD and YS Control Valves Fisher YD and YS three-way cage-guided valves are designed for throttling or flow-switching (on-off) service, and are available in the

More information

Fisher EW Series (EWD/EWS/EWT) Sliding-Stem Control Valves through NPS 12x8

Fisher EW Series (EWD/EWS/EWT) Sliding-Stem Control Valves through NPS 12x8 EW Valve Product Bulletin Fisher EW Series (EWD/EWS/EWT) Sliding-Stem Control Valves through NPS 128 Fisher EW Series easy-e valves (figures 1, 2, 3, and 4) feature large internal cavities with epanded

More information

Fisher EU and EW Valves NPS 12 through 24 x 20

Fisher EU and EW Valves NPS 12 through 24 x 20 Product Bulletin D102004X012 Fisher EU and EW Valves NPS 12 through 24 x 20 EU Valve The Fisher NPS 12 through 24 20 CL150 through CL600 EUT-2, EWT-2, EUD, EWD, EUT, and EWT general-purpose valves (figures

More information

Fisherr easy -et Cryogenic Sliding -Stem Control Valves

Fisherr easy -et Cryogenic Sliding -Stem Control Valves Product Bulletin D102189X012 easy--e Cryogenic Valves Fisherr easy -et Cryogenic Sliding -Stem Control Valves Fisher easy--e cryogenic valves are globe--style, single--port, valves featuring stainless

More information

Fisherr ET, EAT, and ETR Sliding-Stem Control Valves

Fisherr ET, EAT, and ETR Sliding-Stem Control Valves ET Valve D Product Bulletin Fisherr ET, EAT, and ETR Sliding-Stem Control Valves Fisher ET, EAT, and ETR general-purpose control valves (figures,, and ) are used for throttling or on-off controlofawidevarietyofliquidsandgases.allthree

More information

Fisher HP Series Control Valves

Fisher HP Series Control Valves HP Valve Product Bulletin Fisher HP Series Control Valves HP (Globe Valve) HPA (Angle Valve) Balanced High-Temperature Trim Balanced Tight Shutoff Trim Unbalanced Trim Fisher HP Series control valves are

More information

Fisher HP Series Control Valves

Fisher HP Series Control Valves HP Valve Product Bulletin Fisher HP Series Control Valves HP (Globe Valve) HPA (Angle Valve) Balanced High-Temperature Trim Balanced Tight Shutoff Trim Unbalanced Trim Fisher HP Series control valves are

More information

Design HP and HPA 1-through 6-Inch Globe Valves 1- through 2-Inch Angle Valves

Design HP and HPA 1-through 6-Inch Globe Valves 1- through 2-Inch Angle Valves July 99 Bulletin 5.:HP Design HP and HPA -through 6-Inch Globe Valves - through -Inch Angle Valves Design HP (Globe Valve)! Design HPD,! Design HPS, and! Design HPT Design HPA (Angle Valve)! Design HPAD,!

More information

Fisher Large ED/EWD and ET/EWT Valves NPS 12 through 30

Fisher Large ED/EWD and ET/EWT Valves NPS 12 through 30 Large ET and ED Valves Product Bulletin Fisher Large ED/EWD and ET/EWT Valves NPS 12 through 30 Fisher NPS 12 through 30 CL150 through ED/EWD and ET/EWT series control valves are used for either throttling

More information

Fisher Large ED/EWD and ET/EWT Valves NPS 12 through 30

Fisher Large ED/EWD and ET/EWT Valves NPS 12 through 30 Large ET and ED Valves Product Bulletin Fisher Large ED/EWD and ET/EWT Valves NPS 12 through 30 Fisher NPS 12 through 30 CL150 through ED/EWD and ET/EWT series control valves are used for either throttling

More information

Fisher HP Series Control Valves

Fisher HP Series Control Valves HP Valve Product Bulletin Fisher HP Series Control Valves HP (Globe Valve) HPA (Angle Valve) Balanced High-Temperature Trim Balanced Tight Shutoff Trim Unbalanced Trim Fisher HP Series control valves are

More information

Fisherr HP Series Control Valves

Fisherr HP Series Control Valves Fisherr HP Series Control Valves HP (Globe Valve) HPA (Angle Valve) Balanced High-Temperature Trim Balanced Tight Shutoff Trim Unbalanced Trim Fisher HP Series control valves are single-port, high-pressure,

More information

Fisher CAV4 Control Valve

Fisher CAV4 Control Valve Fisher CAV4 Control Valve CAV4 (globe) CAV4 (NPS 2) CAV4 (angle) CAV4 (NPS 2 through 6) CAV4 Series Valves The Fisher CAV4 control valve with Cavitrol IV trim is designed specifically for liquid applications,

More information

Fisher CAV4 Control Valve

Fisher CAV4 Control Valve CAV Valve Product Bulletin Fisher CAV Control Valve The Fisher CAV control valve with Cavitrol IV trim is designed specifically for liquid applications, such as boiler feedwater recirculation, where pressure

More information

Fisher FB Control Valve

Fisher FB Control Valve Fisher FB Control Valve Fisher FB fabricated angle valves are used with compressible fluids on special applications requiring maximum noise attenuation capability and high capacity. Typical applications

More information

Fisher CAV4 Control Valve

Fisher CAV4 Control Valve Product Bulletin D10197X012 Fisher CAV Control Valve CAV Valve The Fisher CAV control valve (figure 1) with Cavitrol IV trim is designed specifically for liquid applications, such as boiler feedwater recirculation,

More information

Model 363 Control Valves

Model 363 Control Valves Features Versatility Multiple port sizes make the 363 an easy valve to reconfigure when process applications change. Rugged Design Available severe service trim and high temperature configurations are

More information

Vee-Ball Design V150, V200 and V300 Rotary Control Valves

Vee-Ball Design V150, V200 and V300 Rotary Control Valves Product Bulletin Vee-Ball Design V150, V200 and V300 Rotary Control Valves Vee-Ball Valves This bulletin covers the 1- through 2-inch, 3- through 12-inch Series B, and the 14- through 20-inch Design V150,

More information

Fisher EH and EHA Control Valves

Fisher EH and EHA Control Valves EH and EHA Valves D100042012 Product Bulletin Fisher EH and EHA Control Valves EH (globe) EHS (NPS 1-1/2x1 through 8x6), EHD (NPS 2 through 20), and EHT (NPS 2 through 16x12) EHA (angle) EHAS (NPS 3 through

More information

Model 361 Control Valves

Model 361 Control Valves FEATURES Sour Service Capability Available in standard configurations that comply with NACE MR0175-2002. Versatility A wide range of trim options including Low-Noise make the 361 one of our most versatile

More information

Model 380/381 Control Valves

Model 380/381 Control Valves Features High Quality Construction Dyna-Flo uses only materials that have been proven to provide superior, trouble free performance. All materials comply with ASME and ASTM specifications. Versatility

More information

Fisher DFA Variable Geometry Desuperheater

Fisher DFA Variable Geometry Desuperheater DFA Desuperheater Product Bulletin Fisher DFA Variable Geometry Desuperheater The Fisher DFA (Desuperheater with Flexible Architecture) can be used in many applications to efficiently control the spraywater

More information

Fisher 461 Increased Outlet Angle Sweep-Flo Valve

Fisher 461 Increased Outlet Angle Sweep-Flo Valve 461 Valve Product Bulletin Fisher 461 Increased Outlet Angle Sweep-Flo Valve The Fisher 461 Sweep-Flo valve is a self-cleaning, increased outlet, angle valve that is typically used in the chemical and

More information

Vee-Ball Designs V150, V200 and V300 Rotary Control Valves

Vee-Ball Designs V150, V200 and V300 Rotary Control Valves January 000 Bulletin 5.3:Vee-Ball Vee-Ball Designs V50, V00 and V300 Rotary Control Valves This bulletin covers the - through -inch, 3- through -inch Series B, and the 4- through 0-inch Designs V50, V00

More information

Fisher CV500 Rotary Control Valve

Fisher CV500 Rotary Control Valve Product Bulletin D101606012 Fisher CV500 Rotary Control Valve CV500 Valve The Fisher CV500 Cam Vee Ball control valve combines the rangeability of the cammed-segmented V-notched ball, with the inherent

More information

Fisher V500 Rotary Control Valve

Fisher V500 Rotary Control Valve Product Bulletin D100054012 Fisher V500 Rotary Control Valve V500 Valve The Fisher V500 eccentric plug rotary control valve controls erosive, coking, and other hard-to-handle fluids, providing either throttling

More information

Fisher CV500 Rotary Globe Control Valve

Fisher CV500 Rotary Globe Control Valve CV500 Valve D101606012 Product Bulletin Fisher CV500 Rotary Globe Control Valve The Fisher CV500 Cam Vee-Ball control valve combines the rangeability of the cammed-segmented V-notched ball, with the inherent

More information

Fisher 8532 High-Performance Butterfly Valve

Fisher 8532 High-Performance Butterfly Valve 8532 Valve Product Bulletin Fisher 8532 High-Performance Butterfly Valve The Fisher 8532 high-performance butterfly valve provides outstanding performance under extreme pressure and temperature conditions.

More information

Fisher A31D Double-Flange High-Performance Butterfly Valve

Fisher A31D Double-Flange High-Performance Butterfly Valve A31D Valve Product Bulletin Fisher A31D Double-Flange High-Performance Butterfly Valve The Fisher A31D double-flange high-performance butterfly valve provides outstanding performance under extreme pressure

More information

Fisher 8532 High-Performance Butterfly Valve

Fisher 8532 High-Performance Butterfly Valve 8532 Valve Product Bulletin Fisher 8532 High-Performance Butterfly Valve The Fisher 8532 high-performance butterfly valve provides outstanding performance under extreme pressure and temperature conditions.

More information

Type 8510 and 8510B Eccentric Disc Control Valves (EMA)

Type 8510 and 8510B Eccentric Disc Control Valves (EMA) Product Bulletin August 4 8510/8510B Valve Type 8510 and 8510B Eccentric Disc Control Valves (EMA) The Type 8510 and 8510B edisc valves feature an eccentrically mounted disc and a PTFE or 316 stainless

More information

Fisher CCV-N Fuel Gas Control Valve

Fisher CCV-N Fuel Gas Control Valve CCV-N Valve Product Bulletin Fisher CCV-N Fuel Gas Control Valve Fisher CCV-N fuel gas control valves are used in gas turbines which meter the fuel gas to the combustion chamber of the turbine and provide

More information

Fisher A31D Double-Flange High-Performance Butterfly Valve

Fisher A31D Double-Flange High-Performance Butterfly Valve A31D Valve Product Bulletin Fisher A31D Double-Flange High-Performance Butterfly Valve The Fisher A31D double-flange high-performance butterfly valve provides outstanding performance under extreme pressure

More information

Model 370/371 Control Valves

Model 370/371 Control Valves Features Sour Service Capability Available in standard configurations that comply with NACE MR0175/ISO 15156. Versatility A wide range of trim options including Low Noise and Anti- Cavitation make the

More information

Fisher 8510 and 8510B Eccentric Disc Control Valves (EMA)

Fisher 8510 and 8510B Eccentric Disc Control Valves (EMA) Product Bulletin D100066X012 February 7 Fisher 8510 and 8510B Eccentric Disc Control Valves (EMA) 8510/8510B Valve Fisher 8510 and 8510B eccentric disc valves feature an eccentrically mounted disc and

More information

Fisher V500 Rotary Globe Control Valve

Fisher V500 Rotary Globe Control Valve V500 Valve D100054012 Product Bulletin Fisher V500 Rotary Globe Control Valve The Fisher V500 eccentric plug rotary control valve controls erosive, coking, and other hard-to-handle fluids, providing either

More information

41005 Series Control Valves. Specification Data CH /10

41005 Series Control Valves. Specification Data CH /10 Putting You In Control Specification ata CH41005 11/10 41005 Series Control Valves Complete Line of Heavy uty, Balanced, Cage Guided, Globe Valves with Lo-dB Anti-Cavitation Capabilities resser Masoneilan

More information

Design GX Control Valve and Actuator System

Design GX Control Valve and Actuator System Product Bulletin Design GX Control Valve and Actuator System The Fisher Design GX is a compact, state-of-the-art control valve and actuator system, designed to control a wide range of process liquids,

More information

Fisher ET and EAT easy e Valves CL125 through CL600

Fisher ET and EAT easy e Valves CL125 through CL600 Instruction Manual D0098X02 ET Valve December 200 Fisher ET and EAT easy e Valves CL25 through CL00 Contents Introduction... Scope of Manual... Description... 2 Specifications... Installation... Maintenance...

More information

Design D and DA Control Valves

Design D and DA Control Valves Product Bulletin Design D and DA Control Valves D and DA Valves Design D and DA single-port, high-pressure valves (figure ) are widely used in oil and gas production industries. These valves are especially

More information

Fisher 8580 Rotary Valve

Fisher 8580 Rotary Valve 8580 Valve Product Bulletin Fisher 8580 Rotary Valve The Fisher 8580 rotary valve offers excellent throttling and automated on-off, quarter-turn performance. An approximately linear flow characteristic

More information

Fisher 8580 Rotary Valve

Fisher 8580 Rotary Valve 8580 Valve Product Bulletin Fisher 8580 Rotary Valve The Fisher 8580 rotary valve offers excellent throttling and automated on-off, quarter-turn performance. An approximately linear flow characteristic

More information

Design CP Control Valve with ENVIRO-SEAL Bellows Seal Bonnet

Design CP Control Valve with ENVIRO-SEAL Bellows Seal Bonnet Instruction Manual Form 5410 November 1998 Design CP/ENVIRO-SEAL Bellows Seal Design CP Control Valve with ENVIRO-SEAL Bellows Seal Bonnet Contents Introduction.............................. 1 Scope of

More information

Type 8560 Eccentric Disk Butterfly Control Valve

Type 8560 Eccentric Disk Butterfly Control Valve Product Bulletin 8560 Valve Type 8560 Eccentric Disk Butterfly Control Valve The Type 8560 high-performance valve (figures 1 and 2) features a stainless steel disk with a soft or stainless steel seal ring.

More information

Fisher Control-Disk Rotary Valve

Fisher Control-Disk Rotary Valve Product Bulletin Fisher Control-Disk Rotary Valve The Fisher Control-Disk rotary valve offers excellent throttling performance. An equal percentage flow characteristic provides an improved throttling range

More information

Fisher Control-Disk Valve NPS 14-24

Fisher Control-Disk Valve NPS 14-24 Control-Disk NPS 14-24 Valve Product ulletin Fisher Control-Disk Valve NPS 14-24 The Fisher Control-Disk valve provides outstanding performance under extreme pressure and temperature conditions. The Control-Disk

More information

Fisher Vee-Ball V150, V200 and V300 Rotary Control Valves

Fisher Vee-Ball V150, V200 and V300 Rotary Control Valves Vee-Ball Valves Product Bulletin Fisher Vee-Ball V150, V200 and V300 Rotary Control Valves This bulletin covers the NPS 1 through 2, NPS 3 through 12 Series B, and the NPS 14 through 20 V150, V200 and

More information

Design V250 Rotary Control Valve

Design V250 Rotary Control Valve Product Bulletin Design V250 Rotary Control Valve V250 Valve The Design V250 Hi-Ball rotary control valve (figure 1) is designed for heavy-duty throttling and on-off applications. Depending on size, this

More information

Design V260 Ball Control Valve

Design V260 Ball Control Valve Product Bulletin D102352X012 V260 Valve Design V260 Ball Control Valve The Design V260 is a full bore control valve designed from the ground up with features for optimized pressure, flow and process control.

More information

21000 Series. Masoneilan* Complete Line of Rugged, Top Guided, Globe Valves with Lo-dB* and Anti-Cavitation Capabilities

21000 Series. Masoneilan* Complete Line of Rugged, Top Guided, Globe Valves with Lo-dB* and Anti-Cavitation Capabilities GE Oil & Gas Technical Specifications 02/2016 Masoneilan* 21000 Series Complete Line of Rugged, Top Guided, Globe Valves with Lo-dB* and Anti-Cavitation Capabilities Table of Contents Numbering System...3

More information

Fisher V260 Ball Control Valve

Fisher V260 Ball Control Valve Fisher V260 Ball Control Valve The Fisher V260 is a full-bore control valve designed from the ground up with features for optimized pressure, flow and process control. An integral drilled attenuator controls

More information

Fisher Vee-Ball V150, V200, and V300 Rotary Control Valves

Fisher Vee-Ball V150, V200, and V300 Rotary Control Valves Vee-Ball Valves Product Bulletin Fisher Vee-Ball V150, V200, and V300 Rotary Control Valves This bulletin covers the DN 25 through 600 (NPS 1 through 24) V150, V200 and V300 Vee-Ball control valves. The

More information

Fisher GX Control Valve and Actuator System

Fisher GX Control Valve and Actuator System Product Bulletin D103171X012 GX Control Valve and Actuator Fisher GX Control Valve and Actuator System The Fisher GX is a compact, state-of-the-art control valve and actuator system, designed to control

More information

Fisher Vee-Ball V150, V200, and V300 Rotary Control Valves

Fisher Vee-Ball V150, V200, and V300 Rotary Control Valves Vee-Ball Valves Product Bulletin Fisher Vee-Ball V150, V200, and V300 Rotary Control Valves This bulletin covers the DN 25 through 600 (NPS 1 through 24) V150, V200 and V300 Vee-Ball control valves. The

More information

Fisher ET and EAT easy e Valves CL125 through CL600

Fisher ET and EAT easy e Valves CL125 through CL600 Instruction Manual ET Valve Fisher ET and EAT easy e Valves CL25 through CL600 Contents Introduction... Scope of Manual... Description... 2 Specifications... 3 Educational Services... 3 Installation...

More information

Fisher Vee-Ball V150, V200, and V300 Rotary Control Valves

Fisher Vee-Ball V150, V200, and V300 Rotary Control Valves Vee-Ball Valves Product Bulletin Fisher Vee-Ball V150, V200, and V300 Rotary Control Valves This bulletin covers the DN 25 through 600 (NPS 1 through 24) V150, V200 and V300 Vee-Ball control valves. The

More information

Fisher V250 Rotary Control Valve

Fisher V250 Rotary Control Valve V250 Valve Product Bulletin Fisher V250 Rotary Control Valve The V250 Hi Ball rotary control valve is designed for heavy duty throttling and on off applications. Depending on size, this valve installs

More information

Fisher ES and EAS easy e Valves CL125 through CL600

Fisher ES and EAS easy e Valves CL125 through CL600 Instruction Manual ES Valve Fisher ES and EAS easy e Valves CL25 through CL600 Contents Introduction... Scope of Manual... Description... 2 Specifications... 2 Installation... 2 Maintenance... 4 Packing

More information

21000 Series Control Valves

21000 Series Control Valves GE Oil & Gas Technical Specifications 09/2012 Masoneilan * Valves 21000 Series Control Valves Complete Line of Rugged, Top Guided, Globe Valves with Lo-dB * & Anti-Cavitation Capabilities Table of Contents

More information

Features. Product Bulletin 51.6:8590 August Valve D104017X012

Features. Product Bulletin 51.6:8590 August Valve D104017X012 8590 Valve Product Bulletin Fisher 8590 High-Performance Butterfly Valve The Fisher 8590 High-Performance Butterfly Valve maintains tight shutoff, and can be specified for a wide range of pressure and

More information

Fisherr GX Control Valve and Actuator System

Fisherr GX Control Valve and Actuator System Product Bulletin D103171X012 GX Control Valve and Actuator Fisherr GX Control Valve and Actuator System The Fisher GX is a compact, state-of-the-art control valve and actuator system, designed to control

More information

Baumann 24000S Stainless Steel Control Valve

Baumann 24000S Stainless Steel Control Valve 24000S Valve Product Bulletin Baumann 24000S Stainless Steel Control Valve The Baumann 24000S versatile, pneumatic, control valve may be used for the control of pressure, temperature, level, and flow.

More information

Baumann 24000CVF Carbon & 24000SVF Stainless Steel Flanged Control Valves

Baumann 24000CVF Carbon & 24000SVF Stainless Steel Flanged Control Valves 24000CVF and 24000SVF Valves Product Bulletin Baumann 24000CVF Carbon & 24000SVF Stainless Steel Flanged Control Valves The Baumann 24000CVF and 24000SVF line of control valves can be utilized for the

More information

Fisher 8590 High-Performance Butterfly Valve

Fisher 8590 High-Performance Butterfly Valve 8590 Valve Product Bulletin Fisher 8590 High-Performance Butterfly Valve The Fisher 8590 High-Performance Butterfly Valve maintains tight shutoff, and can be specified for a wide range of pressure and

More information

Fisher CL600 Control-Disk Valve

Fisher CL600 Control-Disk Valve CL600 Control-Disk Valve Product Bulletin Fisher CL600 Control-Disk Valve The Fisher CL600 Control-Disk valve provides outstanding performance in a wide range of pressure and temperature conditions. The

More information

Fisher SS-138B Continuous Catalytic Regeneration Valve

Fisher SS-138B Continuous Catalytic Regeneration Valve SS-18B Valve Product Bulletin Fisher SS-18B Continuous Catalytic Regeneration Valve This bulletin covers the Fisher SS-18B, an NPS 1 through NPS 8 segmented ball valve with metal flow ring construction.

More information

Fisher A31A Cryogenic High Performance Butterfly Valve

Fisher A31A Cryogenic High Performance Butterfly Valve A31A Cryogenic Valve Product Bulletin Fisher A31A Cryogenic High Performance Butterfly Valve The Fisher A31A Cryogenic High Performance Butterfly Valve (HPBV) is designed for extreme temperature cryogenic

More information

Fisher GX Control Valve and Actuator System

Fisher GX Control Valve and Actuator System GX Control Valve and Actuator Product Bulletin Fisher GX Control Valve and Actuator System The Fisher GX is a compact, state-of-the-art control valve and actuator system, designed to control a wide range

More information

Design D4 Control Valve

Design D4 Control Valve Product Bulletin Design D4 Control Valve D4 Valve The Design D4 control valve is a compact, rugged globe valve designed primarily for high-pressure throttling applications. This valve is ideal for use

More information

Fisher POSI-SEAL A31A Cryogenic High Performance Butterfly Valve

Fisher POSI-SEAL A31A Cryogenic High Performance Butterfly Valve Product Bulletin D500230X012 A31A Cryogenic Valve Fisher POSI-SEAL A31A Cryogenic High Performance Butterfly Valve Description The Fisher A31A Cryogenic High Performance Butterfly Valve (HPBV) is designed

More information

Series 2700A, 2700E and 2720 Control Valves

Series 2700A, 2700E and 2720 Control Valves Series 2700A, 2700E and 2720 Control Valves Flexible Designs: Configurations, trims and actuators to suit your application Series 2700A Series 2720 The Series 2700 family of control valves offers the flexibility

More information

Fisher D4 Control Valve Assembly

Fisher D4 Control Valve Assembly Product Bulletin D103039X012 Fisher D4 Control Valve Assembly D4 Valve The Fisher D4 control valve is a compact, rugged globe valve designed primarily for high-pressure throttling applications. This valve

More information

Fisher easy-e Control Valve NPS 12 through 24x20

Fisher easy-e Control Valve NPS 12 through 24x20 Management of Change Guide Fisher easy-e Control Valve NPS 12 through 24x20 Table of Contents Management of Change...2 Background...2 Question & Answer Checklist...2 Comparison of EU/EW to easy-e Valves...6

More information

Fisher SS-252B Continuous Catalytic Regeneration Valve

Fisher SS-252B Continuous Catalytic Regeneration Valve SS-252B Valve Product Bulletin Fisher SS-252B Continuous Catalytic Regeneration Valve This bulletin covers the Fisher SS-252B, an NPS 1 through NPS 8 segmented ball valve with an R000 metal seal. The segmented

More information

Masoneilan * Series

Masoneilan * Series GE Oil & Gas Technical Specifications 05/2013 Masoneilan * 80000 Series Three-Way Control Valves Combining and Diverting Service 2 GE Oil & Gas Table of Contents Features...3 Numbering System...4 Ratings/Connections...4

More information

Series 2700A, 2700E and 2720 Control Valves

Series 2700A, 2700E and 2720 Control Valves Series 2700A, 2700E and 2720 Control Valves Flexible Designs: Series 2700A Series 2720 Configurations, trims and actuators to suit your application The Series 2700 family of control valves offers the flexibility

More information

Fisher EWD, EWS, and EWT Valves through NPS 12x8

Fisher EWD, EWS, and EWT Valves through NPS 12x8 Instruction Manual D100399X012 Fisher EWD, EWS, and EWT Valves through NPS 12x8 EW Valve Contents Introduction................................. 1 Scope of Manual.......................... 1 Description...............................

More information

Fisher Sliding-Stem Valve Selection Guide

Fisher Sliding-Stem Valve Selection Guide Sliding-Stem Valve Selection Guide Product Bulletin Fisher Sliding-Stem Valve Selection Guide W8861 W7957-2 X0165 GX easy-e Typical Fisher Sliding-Stem Control Valves TBX STEAM CONDITIONING VALVE A broad

More information

Design EUD, EUT-2, EWD, and EWT-2 Valves

Design EUD, EUT-2, EWD, and EWT-2 Valves Instruction Manual EUD, EUT-2, EWD, and EWT-2 Valves Design EUD, EUT-2, EWD, and EWT-2 Valves Contents Introduction............................... 1 Scope of Manual.......................... 1 Description...............................

More information

Masoneilan* Series Double Ported Globe Valve

Masoneilan* Series Double Ported Globe Valve GE Oil & Gas Technical Specifications Rev.B - 0/2017 Masoneilan* 10000 Series Double Ported Globe Valve GE Data Classification : Public Table of Contents Numbering System...2 General Data...2 Temperature

More information

Fisher A11 High-Performance Butterfly Valve

Fisher A11 High-Performance Butterfly Valve isher A11 igh-performance Butterfly Valve The isher A11 igh-performance Butterfly Valve maintains tight shutoff, and can be specified for a wide range of pressure and temperature conditions, including

More information

Design ED and EAD easy-e Valves Class 125 through 600

Design ED and EAD easy-e Valves Class 125 through 600 Instruction Manual ED Valve Design ED and EAD easy-e Valves Class 25 through 00 Contents Introduction............................... Scope of Manual......................... Description..............................

More information

Fisher eplug complete Rotary Control Valve and Actuator Package

Fisher eplug complete Rotary Control Valve and Actuator Package Product Bulletin D103196X012 eplug complete Fisher eplug complete Rotary Control Valve and Actuator Package...your complete control valve solution... simple...easy to select and install reliable...engineered

More information

Fisher GX 3-Way Control Valve and Actuator System

Fisher GX 3-Way Control Valve and Actuator System GX 3-Way Valve and Actuator Product Bulletin Fisher GX 3-Way Control Valve and Actuator System The Fisher GX 3-Way is a compact, state-of-the-art control valve and actuator system, designed to accurately

More information

Fisher EWD, EWS, and EWT Valves through NPS 12x8

Fisher EWD, EWS, and EWT Valves through NPS 12x8 Instruction Manual EW Valve Fisher EWD, EWS, and EWT Valves through NPS 12x8 Contents Introduction... 1 Scope of Manual... 1 Description... 3 Specifications... 3 Installation... 4 Inverted Globe Valve

More information

10000 Series Control Valves

10000 Series Control Valves GE Energy Technical Specifications 07/2012 Masoneilan * Valves 000 Series Control Valves ouble Ported Globe Valves Table of Contents Numbering System...2 General ata...2 Temperature Range / Seat Leakage...3

More information

Fisher Z500 Severe Service Ball Valves

Fisher Z500 Severe Service Ball Valves Z500 Ball Valves D099X0 Product Bulletin 5.:Z500 April 06 Fisher Z500 Severe Service Ball Valves This bulletin covers Fisher NPS / 6 Z500 Severe Service Ball Valves. The Z500 severe service ball valve

More information

KOSO HAMMEL DAHL. Specifications. Body Size: Globe - 1/2" through 6" ( mm). Angle - 1/2" through 2" (15-50 mm).

KOSO HAMMEL DAHL. Specifications. Body Size: Globe - 1/2 through 6 ( mm). Angle - 1/2 through 2 (15-50 mm). control valves KOSO HAMMEL DAHL B U L L E T I N G 1 3 0-1 FEATURES Cage-retained quick change seat ring simplifies maintenance. Metal seats for a variety of services and ANSI IV and V shutoff. Soft seat

More information

Masoneilan * Series Three-Way Control Valves Combining and Diverting Service

Masoneilan * Series Three-Way Control Valves Combining and Diverting Service Technical Specifications Rev.C - 08/2017 Masoneilan * 80000 Series Three-Way Control Valves Combining and Diverting Service BHGE Data Classification : Public Contents Features 3 Numbering System 4 Ratings/Connections

More information

Fisher ED and EAD easy e Valves CL125 through CL600

Fisher ED and EAD easy e Valves CL125 through CL600 Instruction Manual ED Valve Fisher ED and EAD easy e Valves CL25 through CL600 Contents Introduction... Scope of Manual... Description... 2 Specifications... 2 Educational Services... 3 Installation...

More information

Fisher ED and EAD easy e Valves CL125 through CL600

Fisher ED and EAD easy e Valves CL125 through CL600 Instruction Manual ED Valve Fisher ED and EAD easy e Valves CL25 through CL600 Contents Introduction... Scope of Manual... Description... 2 Specifications... 3 Installation... 3 Maintenance... 4 Packing

More information

Model 363 Control Valve

Model 363 Control Valve echnical Sales Bulletin October 008 P-363B008A Features Versatility Multiple port sizes make the 363 an easy valve to reconfigure when process applications change. Rugged Design Available severe service

More information