Masoneilan Series Control Valves

Transcription

1 Masoneilan Series Control Valves Specification Data CH /07 Complete Line of Heavy Duty, Balanced, Cage Guided, Globe Valves with Lo-dB and Anti-Cavitation Capabilities

2 Table of Contents Features...2 Numbering System...3 General Data...4 Ratings/Connections...4 Seal Type versus Temperature Range/Seat Leakage...5 Flow Direction...5 C v and F L versus Travel...6 Body S/A Construction...11 Materials of Construction...12 Seal Ring Construction...16 Trim Types...17 Dimensions...18 Weights...25 Accessories and Options...27 Sales Offices and Distribution Centers...Back Cover Features High Performance Design Masoneilan s Series heavy-duty globe control valves are engineered to handle the most demanding process conditions and exceeds the capabilities of comparable designs. The balanced cage-guided construction of the Series provides some key advantages versus typical unbalanced and/or contoured plug type designs: Higher Flow Capacities Higher Pressure Drop Capabilities Reduced Actuator Size and Thrust Requirements Improved Stability with Larger Guide Areas Increased Low Noise and Anti-Cavitation Trim Options Wide Application Range Masoneilan s Series control valves provide high flow capacities combined with low pressure recoveries as reflected by the high F L factors. This product line also provides efficient and dependable performance over a wide range of pressures and temperatures typical in critical service applications. Maximum Reliability Specification and selection of the best solution for any application is simplified with the standard design options and materials available in the Series. Standard product construction and material combinations are based on over 40 years of successful field experience in various process industries. Various Seal Options The Series is available with a variety of seal designs and materials to meet a wide combination of temperature and shut-off requirements. Versatile Trim Solutions Various noise attenuation, anti-cavitation, and tight shut-off solutions are available within the standard product envelope. This includes the following trim options: Single Stage Trim Provides excellent low noise performance on either gas or steam applications. Also provides an effective anti-cavitation solution for liquid services. Multi-Stage Trim Provides highly effective low noise and anti-cavitation solutions for high-pressure ratio applications. Pilot Balanced Trim Provides unmatched tight shut-off performance for high temperature applications. Internal Diffuser Provides additional low noise and anti-cavitation benefits in flow-to-close () applications. Engineered Solutions Special trim designs can also be provided for applications not covered by the standard trim noted above. NACE Compliance The Series is available for sour service applications. Standard materials and processes are in accordance with the requirements of NACE specification MR0103. Applications requiring compliance to MR or ISO15156 must be reviewed by Masoneilan. Trade names noted throughout are for reference only. Masoneilan reserves the right to supply trade named material or its equivalent Series 2

3 Numbering System 1st 2nd 1st 2nd 3rd 4th 5th th Actuator Type Spring Diaphragm 37 Spring Diaphragm : direct, air to close (fail open) 38 Spring Diaphragm : reverse, air to open (fail close) 87 Spring Diaphragm : direct, air to close (fail open) 88 Spring Diaphragm : reverse, air to open (fail close) Cylinder * 51 Cylinder : double-acting, without spring, air to open or air to close action 67 Cylinder : spring return, direct, air to close, single or double-acting (fail open) 68 Cylinder : spring return, reverse, air to open, single or double-acting (fail close) 84 Cylinder : spring return, direct, air to close, single or double-acting (fail open) 85 Cylinder : spring return, reverse, air to open, single or double-acting (fail close) 86 Cylinder : double-acting, without spring, air to open or air to close action Body Series 41 Cage Guided, Balanced Globe Seal Type 0. Undefined 3. Pressure Energized PTFE Seal Ring 4. Auxiliary Shut-off Plug (Pilot) 5. Metal Seal Ring 6. PTFE Seal Ring 9. Graphite Seal Ring Trim Type/Characteristic 0. Undefined 1. Standard Cage/Linear 2. Standard Cage/Equal % 3. Lo-dB/Anti-Cav Single Stage/ Linear 4. Lo-dB/Anti-Cav Single Stage with Diffuser/Linear 5. Lo-dB Multi- Stage/Linear 6. VRT (stack) Type S/Linear 7. VRT (partial stack) Type S/Modified 8. VRT (cage) Type C/Linear 9. Anti-Cav Multi- Stage/ Linear Design Series 5 Optional Config. A Angle Body * Consult factory for selection of appropriate cylinder actuator type. Engineered trim options are also available for high temperature and high pressure drop applications. Please consult factory for details Series 3

4 General Data Standard Valve (41305, 41405, 41505, and 41905) Body type : high-capacity globe or angle flow direction : see Flow Direction Table C V ratio : 100:1 standard capacity trim 50:1 Lo-dB and reduced capacity trim Bonnet type : stud bolted extension Trim cage : cylindrical ported or Lo-dB plug : pressure balanced cage guided with various seal ring options; pressure balanced cage guided, with spring loaded internal auxiliary tight shut-off plug Standard Flow Characteristics standard trim : linear, equal percentage Lo-dB trim : linear Lo-dB trim with diffuser : linear anti-cavitation trim : linear Lo-dB Multi-Stage Valve (41355, 41555, 41655, 41955) Flow Direction: see Flow Direction Table Fluid: gas or steam C V ratio : 50:1 Ratings/Connections (cont.) Lo-dB Multi-Stage Valve (41355, 41555, 41655, 41955) Trim cage : multi-stage plug : pressure balanced cage guided with various seal ring options Standard Flow Characteristic standard trim : linear Anti-Cavitation Multi-Stage Valve (41395, 41495, 41595, 41995) Flow Direction: see Flow Direction Table Fluid: liquid C V ratio : 50:1 Trim cage : multi-stage plug : pressure balanced cage guided with various seal ring options Standard Flow Characteristic standard trim : linear Actuator type : handwheel : spring diaphragm spring-return cylinder double-acting cylinder optional Pressure Drop Refer to PH3000 for Series Pressure Drop Tables Threaded Socket Weld Butt Weld RF & RTJ inch Valve Size mm ANSI Class 150 to 1500 ANSI Class to 8 80 to to to 400 3x2 80x50 4x2 100x50 4x3 100x80 6x3 150x80 6x4 150x100 8x4 200x100 8x6 200x150 10x6 250x150 10x8 250x200 12x8 300x200 16x12 400x300 14,18,20,24 350,450,500,600 Notes: 1. Angle Body Version is available in valve sizes 2" - 6" with ANSI ratings from Class 150 to Class 1500 and standard raised face end connections. 2. Ex. 3x2 size = valve with 3" body x standard 2" trim. 3. Consult Masoneilan for AFNOR and DIN connections. = ANSI Class 2500 Ratings and 14", 18", 20" and 24" sizes are available. Please consult factory for details Series 4 4

5 Seal Type versus Temperature Range/Seat Leakage Valve Model Seal Type Pressure Energized PTFE Seal Ring Auxiliary Pilot Plug with Metal Seal Ring Metal Seal Ring PTFE Seal Ring Graphite Seal Ring Valve Size Temperature Range (1) Seat Leakage per IEC and inches mm Minimum Maximum ANSI / FCI 70.2 Class F (-100 C) +450 F (+232 C) IV (standard) V (optional) F (-196 C) (2) +850 F (+454 C) IV (standard) F (-196 C) F (+566 C) V (optional) F (-196 C) (2) +850 F (+454 C) II F (-196 C) F (+566 C) III F (-29 C) +300 F (+149 C) IV F (-196 C) +850 F (+454 C) III F (-196 C) +850 F (+454 C) IV Notes: 1. See Materials of Construction Tables for other temperature limitations 2. Maximum temperature limit for the 2" (50mm) size is F (+566 C). Flow Direction Model Number (1) Seal Type Pressure Energized PTFE Seal Ring Auxiliary Pilot Plug with Metal Seal Ring Metal Seal Ring PTFE Seal Ring Graphite Seal Ring Standard Trim 41015/ /41325 FTO or (2) 41415/ /41525 FTO or 41615/41625 FTO or 41915/41925 FTO or Lo-dB Single Stage FTO FTO FTO FTO Anti-Cavitation Single Stage Lo-dB & Anti-Cavitation Single Stage with Internal Diffuser (3) Lo-dB Multi-Stage FTO N/A FTO FTO FTO Anti-Cavitation Multi-Stage Notes: 1. Flow direction for Pilot Plug Seal configuration is always. 2. Seal ring must be installed in correct orientation relative to high pressure direction. 3. Flow direction with Internal Diffuser is always Series 5

6 C v and F L versus Travel Standard Trim Models 41315, 41415, 41515, and Flow Characteristic : LINEAR Percent of Travel F L Valve Size ANSI Class and Orifice Diameter Travel Rated C v inches mm equivalent PN inches mm inches mm x2 80x x2 100x x3 100x x3 150x x4 150x x4 200x (1) 20.3 (1) x6 200x x6 250x x8 250x x8 300x x12 400x Notes: 1. Travel of 1.5 inches (38.1mm) for Ex. 3x2 size = valve with 3" body with standard 2" trim Series 6

7 C v and F L versus Travel Standard Trim Models 41325, 41425, 41525, and Flow Characteristic : EQUAL PERCENTAGE Percent of Travel F L ANSI Class Valve Size and Orifice Diameter Travel Rated C v inches mm Equivalent PN inches mm inches mm x2 80x x2 100x x3 100x x3 150x x4 150x x4 200x x6 200x x6 250x x8 250x x8 300x x12 400x Note: 1. Ex. 3x2 size = valve with 3" body with standard 2" trim Series 7

8 C v and F L versus Travel Single Stage Lo-dB /Anti-Cavitation Models: 41335, 41435, 41535, 41635, 41935, 41X45 (with internal diffuser) Flow Characteristic : LINEAR Percent of Travel F L ANSI Class Valve Size and Orifice Diameter Travel Rated C v inches mm Equivalent PN inches mm inches mm x2 80x x2 100x x3 100x x3 150x x4 150x x4 200x x6 200x x6 250x x8 250x x8 300x x12 400x Notes: 1. Ex. 3x2 size = valve with 3" body with standard 2" trim. 2. Internal diffuser design only available for valve sizes 6" to 16" (150 to 400mm) and with capacities shaded above Series 8

9 C v and F L versus Travel Multi-Stage Lo-dB Models 41355, 41555, and Flow Characteristic : LINEAR Percent of Travel F L ANSI Class Valve Size and Orifice Diameter Travel inches mm Equivalent PN inches mm inches mm Rated C v x2 80x x2 100x x3 100x x3 150x x4 150x x4 200x x6 200x x6 250x x8 250x x8 300x x12 400x Note: 1. Ex. 3x2 size = valve with 3" body with standard 2" trim Series 9

10 C v and F L versus Travel Multi-Stage Anti-Cavitation Models 41395, 41495, 41595, and Flow Characteristic : LINEAR Percent of Travel F L Valve Size (1) ANSI Class and Orifice Diameter Travel Rated C v inches mm Equivalent PN inches mm inches mm x2 80x x2 100x x3 100x x3 150x x3 100x80 6x3 150x x4 150x x4 200x x6 200x x6 250x x8 250x x8 300x x12 400x Note: 1. Valve size example: 3x2 size = valve with 3" body with standard 2" trim Series 10

11 Body S/A Construction 5 10 Ref. Part Name Valve Plug Stem Packing Flange Stud Packing Flange Nut Packing Flange Packing Spacer Packing Bonnet Valve Body Nut Plug Stem Pin Body Gasket Pilot Spring(s) Seat Ring Seat Ring Gasket Valve Plug (or Piston) Cage Conical Spring Valve Body Retaining Ring Auxiliary Pilot Plug Valve Body Stud Guide Bushing Packing Follower Cage Gasket Tec Seal Ni-resist Seal Ring PTFE Seal Ring Nordel Backup Ring Graphite Seal Ring Ni-resist Backup Ring Double cage Pin For Series Valves Only For 6" to 16" Valves Sizes Only above 450 F (232 C) For Series Valves Only Recommended Spare Parts For Series Valves Only For / Series Valves Only For Series Valves Only Packing with lateral connection " - 4" All temperatures " - 16" without Conical spring 450 F (232 C) " - 16" with Conical spring > 450 F (232 C) 13 Refer to Seal Ring Construction on Page Balance Plug Construction Model 41305, 41505, 41605, Sizes 2" to 16" Double cage Pilot Balanced Construction Model Applications up to 850 F (454 C) Sizes 2" to 4" shown Series Pilot Balanced Construction Model Applications above 450 F (232 C) to 1050 F (566 C) Sizes 6" to 16" shown 11

12 Materials of Construction Standard Carbon Steel Version Ref. No Temperature Range Description -20 F 450 F 650 F 800 F (-29 C) (232 C) (343 C) (427 C) Standard Materials 1 Plug Stem 17-4 PH St. St. ASTM A564 GR 630 See Optional Materials 2 Packing Flange Stud 304 St. St. ASTM A193 GR B8 3 Packing Flange Nut 304 St. St. ASTM A194 GR 8 4 Packing Flange Carbon Steel ASTM A105 Zinc Plated 5 Packing Spacer 303 St. St. ASTM A582 TY Packing Kevlar PTFE (Crane 285K) (ANSI Class ) PTFE/Carbon and Graphite Wiper Rings (ANSI Class 1500 and 2500) See Optional Materials 7 Valve Bonnet Carbon Steel ASTM A216 Grade WCC 8 Valve Body Nut Carbon Steel ASTM A194 GR 2H 9 Plug Stem Pin 316 St. St. ASTM A479 TY Valve Body Gasket 316L St. St. w/flexible Graphite Filler (Spiral Wound) Pilot Spring(s) 2" to 4" Inconel X-750 AMS 5598 (Stacked Washers) 12 (41405 Only) 6" to 16" Inconel X-750 ASTM B637 GR Seat Ring 410 St. St. ASTM A479 TY 410 Hardened See Optional Materials 14 Seat Ring Gasket 316L St. St. w/flexible Graphite Filler (Spiral Wound) 15 Valve Plug 17-4 PH St. St. ASTM A747 GR CB7CU-1 Condition H1075 See Optional Materials 16 Cage Martensitic St. St. ASTM A487 GR CA6NM CL A Hard Chrome Plated 17 Conical Spring (6" to 16") (See Note 1) See Optional Materials 17-4 PH ASTM A564 GR 630 Condition H Valve Body Carbon Steel ASTM A216 Grade WCC 19 Retaining Ring (41405 Only) Inconel X-750 AMS Auxiliary Pilot Plug 2" to 4" 410 St. St. ASTM A479 TY 410 Hardened (41405 Only) 6" to 16" Martensitic St. St. ASTM A487 GR CA6NM CL A with Chrome Plated Guide and Hardfaced Seat 21 Valve Body Stud Alloy Steel ASTM A193 GR B7 22 Guide Bushing 440C St. St. ASTM A276 TY 440C 23 Packing Follower 303 St. St. ASTM A582 TY 303 Internal Diffuser (6" to 16") (See Note 2) 316 St. St. ASTM A479 TY 316 with Hardfaced Seat Inconel X-718 ASTM B637 + Shot Peening Cage Gasket (6" to 16") (See Note 3) 316L St. St. w/flexible Graphite Filler (Spiral Wound) Seal Ring See Page 16 See Optional Materials Notes: 1. Conical spring only required for valve sizes 6 to 16 for applications > 450 F (232 C). 2. Internal Diffuser includes an internal 316SS Seat Ring with hardfaced seat. This part replaces the Seat Ring (Ref. No. 13) when this option is selected. See graphic on page Cage gasket only required for valve sizes 6 to 16 for applications 450 F (232 C). Review use of optional materials and configurations for temperature ranges indicated. Standard materials listed may still be applicable depending on specific service conditions. Consult Masoneilan for appropriate material combinations Series 12

13 Materials of Construction Standard Stainless Steel Version (1) Ref. No Temperature Range Description 1 Plug Stem See Optional Materials 316 St. St. ASTM A479 TY 316 See Optional Materials 7 Valve Bonnet (2) 18 Valve Body -320 F (-196 C) -50 F (-46 C) 450 F (232 C) 650 F (343 C) 1050 F (566 C) Standard Materials 316 St. St. ASTM A351 GR CF8M 13 Seat Ring 316 St. St. ASTM A479 TY 316 with Hardfaced Seat 15 Valve Plug 316 St. St. ASTM A479 TY 316 with Hardfaced Seat 16 Cage 316 St. St. ASTM A479 TY 316 Chrome-Plated See Optional Materials 17 Conical Spring (6 to 16 ) (See Note 3) See Optional Materials Inconel X-718 ASTM B637 + Shot Peening 20 Auxiliary Pilot Plug (41405 Only) 22 Guide Bushing 316 St. St. ASTM A479 TY 316 with Chrome Plated Guide and Hardfaced Seat 316 St. St. ASTM A479 TY 316 with Hardfacing Stellite 6 UNS (HRC 22 Max.) Notes: 1. Materials for other components are same as listed for Standard Carbon Steel Version. 2. Extension bonnet required for temperatures below 100 F (-73 C). 3. Conical spring only required for valve sizes 6 to 16 for applications > 450 F (232 C). 4. See trim materials for Standard Carbon Steel Version for Martenistic Trim Option. Optional Configurations and Materials Ref. No Temperature Range Description -320 F (-196 C) -100 F (-73 C) -50 F (-46 C) -20 F (-46 C) 650 F (343 C) 800 F (427 C) 1050 F (566 C) Optional Materials 1 Plug Stem 6 Packing A286 Super Alloy ASTM A638 GR 660 Inconel X-750 ASTM B637 GR 688 Kevlar PTFE (Crane 285K) LE Packing (1) Flexible Graphite 7 Valve Bonnet 18 Valve Body Carbon Steel ASTM A 352 Grade LCC 2 to St. St. ASTM A479 TY 316 with Hardfaced Seat Chrome-Moly Steel ASTM A217 Grade WC6 or Grade WC9 13 Seat Ring 6 to 16 Martensitic St. St. ASTM A487 GR CA6NM CL A with Hardfaced Seat 15 Valve Plug Martensitic St. St. ASTM A487 GR CA6NM CL A Nitrided 16 Cage 20 Auxiliary Pilot Plug (2 to 4 ) (41405 Only) Martensitic St. St. ASTM A487 GR CA6NM CL A Nitrided 316 St. St. ASTM A479 TY 316 Nitrided Martensitic St. St. ASTM A487 GR CA6NM CL B with Chrome Plated Guide and Hardfaced Seat Notes: 1. LE Packing for low emissions applications is limited to the maximum operating pressure and temperature range shown in Figure Consult Masoneilan for material combinations for temperatures below 20 F (-29 C) or above 800 F (427 C). Review use of optional materials and configurations for temperature ranges indicated. Standard materials listed may still be applicable depending on specific service conditions. Consult Masoneilan for appropriate material combinations Series 13

14 Materials of Construction Optional Bolting Materials Ref. Temperature Range No Description 8 Valve Body Nut (1) 21 Valve Body Stud (1) -320 F (-196 C) to -150 F (-101 C) to 850 F (454 C) to 950 F (510 C) to -150 F (-101 C) -20 F (-29 C) 950 F (510 C) 1050 F (566 C) 316 SS ASTM A194 Grade 8M 316 SS ASTM A193 Grade B8M Class 2 Alloy Steel ASTM A194 Grade 4 Alloy Steel ASTM A320 Grade L7 Optional Materials Alloy Steel ASTM A194 Grade 4 Alloy Steel ASTM A193 Grade B SS ASTM A194 Grade 8 Super Alloy ASTM A453 Grade 660 Note: 1. Use following materials for 2 and 3 sizes ANSI Class 300/600 at temperatures below -20 F (-29 C). Studs SS ASTM A193 Grade B8 Class 2 Nuts 304 SS ASTM A194 Grade 8. Pressure and Temperature Rating of LE Packing 1600 (112) 1400 (98) 1200 (84) Fluid Pressure in PSI (Bar) 1000 (70) 800 (56) 600 (42) 400 (28) 200 (14) (38) 200 (93) 300 (149) 400 (204) 500 (260) 600 (316) 700 (371) Fluid Temperature in F ( C) Figure 1 SD CH / Series 14

15 Materials of Construction NACE (1) Configuration and Material Options Valve Sizes: 2" to 16" Body Ratings: ANSI Class 150 to 1500 Ref. No Temperature Range -20 F (-29 C) Description 1 Plug Stem 2 Packing Flange Stud 3 Packing Flange Nut Standard and Optional Materials 316 St. St. ASTM A479 TY 316 (HRC 22 Max.) Inconel X-750 ASTM B637 GR 688 (HRC 35 Max.) Super Alloy ASTM A638 GR 660 (HRC 35 Max.) 304 St. St. ASTM A193 GR B8 (2) 304 St. St. ASTM A193 Gr B8 (3) (HRC 22 Max.) 304 St. St. ASTM A194 GR 8 (2) 304 St. St. ASTM A194 GR 8A (3) (HRC 22 Max.) 4 Packing Flange Corrosion Protected Carbon Steel (HRC 22 Max.) 5 Packing Spacer 304 St. St. ASTM A479 TY Packing Kevlar PTFE (Crane 285K) Carbon Steel ASTM A216 Grade WCC (HRC 22 Max.) 7 Valve Bonnet Carbon Steel ASTM A105 (HRC 22 Max.) 316 St. St. ASTM A351 Gr CF8M (HRC 22 Max.) 8 Valve Body Nut Alloy Steel ASTM A194 GR 2H (2) Alloy Steel ASTM A194 Gr 2HM (3) 9 Plug Stem Pin 316 St. St. ASTM A479 TY 316 (HRC 22 Max.) 10 Valve Body Gasket 316L St. St. w/flexible Graphite Filler (Spiral Wound) 12 Pilot Spring(s) 2 to 4 Inconel X-750 AMS 5598 (HRC 50 Max.) (41405 Only) 6 to 16 Inconel X-750 ASTM B637 GR 688 (HRC 50 Max.) 13 Seat Ring 316 St. St. ASTM A479 TY 316 (HRC 22 Max.) 316 St. St. ASTM A479 TY 316 with Hardfaced Seat (HRC 22 Max.) 14 Seat Ring Gasket 316L St. St. w/flexible Graphite Filler (Spiral Wound) 15 Valve Plug 316 St. St. ASTM A479 TY 316 with Hardfaced Seat (HRC 22 Max.) Martensitic St. St. ASTM A487 GR CA6NM CL B (HRC 22 Max.) 16 Cage 316 St. St. ASTM A479 TY 316 Hard Chrome Plated (HRC 22 Max.) Martensitic St. St. ASTM A487 GR CA6NM CL B Hard Chrome Plated (HRC 23 Max.) 17 Conical Spring (6" to 16") Inconel X-718 ASTM B637 + Shot Peening 18 Valve Body Carbon Steel ASTM A216 Grade WCC (HRC 22 Max.) 316 St. St. ASTM A351 Gr CF8M (HRC 22 Max.) 19 Retaining Ring (41405 Only) Inconel X-750 AMS 5598 (HRC 50 Max.) 20 Auxiliary Pilot Plug 316 St. St. ASTM A479 TY 316 with Hardfaced Seat (HRC 22 Max.) (41405 Only) Martensitic St. St. ASTM A487 GR CA6NM CL B Chrome Plated Guide and Hardfaced Seat (HRC 23 Max.) 21 Valve Body Stud Alloy Steel ASTM A193 GR B7 (2) Alloy Steel ASTM A193 Gr B7M (3) 22 Guide Bushing Stellite 6 UNS (HRC 22 Max.) 316 St. St. ASTM A479 TY 316 with Hardfacing (HRC 22 Max.) 23 Packing Follower 316 St. St. ASTM A479 TY 316 (HRC 22 Max.) Internal Diffuser (6 to 16 ) (Not Shown) 316 St. St. ASTM A479 TY 316 with Hardfaced Seat (HRC 22 Max.) 24 Cage Gasket (6 to 16 ) (4) 316L St. St. w/flexible Graphite Filler (Spiral Wound) Seal Ring (5) See Page Drive Nut (Not Shown) Carbon Steel SAE 1117 (2) Carbon Steel ASTM A105 or SAE (3) 650 F (343 C) Notes: 1. Standard materials and processes are in accordance with the requirements of NACE specification MR0103. Applications requiring compliance to MR or ISO15156 must be reviewed by Masoneilan. 2. Materials designated for these parts conform to NACE Class III bolting requirements. (Non-Exposed) 3. Materials designated for these parts conform to NACE Class I or Class II bolting requirements. (Exposed) 4. Cage gasket only required for valve sizes 6 to 16 for applications 450 F (232 C). 5. Seal ring materials for Model (PTFE Seal Ring) will be replaced with Glass-Reinforced PTFE External Seal Ring (Ref. No. 40) and Viton Internal Seal Ring (Ref. No. 41). 6. Maximum temperature for Models and limited to 450 F (232 C) Series 15

16 Seal Ring Construction Model Models and Seal Type: Pressure Energized Polymeric Leakage: Class IV Standard (Class V Optional) Temperature: -148 F (-100 C) to +450 F (+232 C) Seal Type: Metal Leakage: From Class II to Class V (with pilot) Temperature: -320 F (-196 C) to F (+566 C) PLUG CAGE High Pressure Side PLUG CAGE CAGE Seal Shown in FTO Orientation Model Seal Type: TFE and Resilient Inner Leakage: Class IV Standard Temperature: -20 F (-29 C) to +300 F (+149 C) Model Seal Type: Graphite and Metal Inner Leakage: Class III and Class IV Standard Temperature: -320 F (-196 C) to +850 F (+454 C) PLUG CAGE PLUG CAGE Seal Ring Construction -320 F -148 F -20 F +300 F +450 F +650 F +850 F F Temperature Range (-196 C) (-100 C) (-29 C) (+149 C) (+232 C) (+343 C) (+454 C) (+566 C) Ref. No. Description Materials 31 Seal Ring PTFE + 25% Graphite and ELGILOY Spring 35 External Seal Ring Ni-Resist ASTM A439 Type D3 Nitrided CA6NM 40 External Seal Ring 41 Internal Seal Ring Note: Bronze PTFE Glass Reinforced PTFE (1) Nordel Viton (1)(2) 45 External Seal Ring Graphite 46 Internal Seal Ring Ni-Resist ASTM A439 Type D3 1. Optional materials for NACE Service. Viton not recommended for water or steam service. 2. Viton is recommended for oil and hydrocarbon service Series 16

17 Trim Types Models Multi-Stage Low Noise Trim FTO Models Single Stage Low Noise Trim FTO Anti-Cavitation Trim Models Multi-Stage Anti-Cavitation Trim Model Single Stage with Internal Diffuser (Sizes 6" - 16") Model Pilot Balanced Construction Series 17

18 Dimensions (inches) Flanged Butt, Socket Weld or Screwed Ends Angle Body S/A (inches) A Pressure Class ANSI Class 150 ANSI Class 300 ANSI Class 600 ANSI Class 900 inches Valve Size mm RF RTJ BW & SW x2 80x50 (1) (1) (1) x2 100x50 (1) (1) (1) 4x3 100x x3 150x80 6x4 150x x4 200x100 8x6 200x x6 250x150 10x8 250x x8 300x x12 400x300 (1) (1) (1) (1) Notes: 1. Consult Masoneilan 2. Ex. 3x2 size = valve with 3" body x standard 2" trim. RF RTJ BW & SW RF RTJ BW & SW RF RTJ Series 18

19 Dimensions (inches) Body S/A (inches) Pressure Class Valve Size inches mm x2 80x x2 100x50 4x3 100x x3 150x80 6x4 150x x4 200x100 8x6 200x x6 250x150 10x8 250x x8 300x x12 400x300 BW & SW A ANSI Class 1500 RF RTJ B max All Classes C max All Classes (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) Notes: 1. Consult Masoneilan 2. Ex. 3x2 size = valve with 3" body x standard 2" trim. Angle Body S/A (inches) D Pressure Class ANSI Class 150 ANSI Class 300 ANSI Class 600 ANSI Class 900 ANSI Class 1500 Valve Size RF RTJ RF RTJ RF RTJ RF RTJ RF RTJ inches mm Series 19

20 Dimensions (mm) Body S/A (mm) Flanged Butt, Socket Weld or Screwed Ends Angle A Pressure Class ANSI Class 150 ANSI Class 300 ANSI Class 600 ANSI Class 900 Valve Size inches mm RF RTJ BW & SW RF RTJ BW & SW RF RTJ BW & SW RF RTJ x2 80x50 (1) (1) (1) x2 100x50 (1) (1) (1) 4x3 100x x3 6x x80 150x x4 200x100 8x6 200x x6 250x150 10x8 250x x8 300x x12 400x300 (1) (1) (1) (1) Notes: 1. Consult Masoneilan 2. Ex. 80x50 size = valve with 80mm body x standard 50mm trim Series 20

21 Dimensions (mm) Body S/A (mm) Pressure Class Valve Size inches mm x2 80x x2 100x50 4x3 100x x3 150x80 6x4 150x x4 200x100 8x6 200x x6 250x150 10x8 250x x8 300x x12 400x300 BW & SW A ANSI Class 1500 RF RTJ B max All Classes C max All Classes (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) Notes: 1. Consult Masoneilan 2. Ex. 80x50 size = valve with 80mm body x standard 50mm trim. Angle Body S/A (mm) D Pressure Class ANSI Class 150 ANSI Class 300 ANSI Class 600 ANSI Class 900 ANSI Class 1500 Valve Size RF RTJ RF RTJ RF RTJ RF RTJ RF RTJ inches mm Series 21

22 Actuator Dimensions Model 87/88 Multi-Spring Diaphragm Actuator Shown with optional handwheel Model 87/88 Actuator (inches) Actuator Size P R S T Actuator removal clearance = 6 inches Model 87/88 Actuator (mm) Actuator Size P R S T Actuator removal clearance = 150 mm Series 22

23 Actuator Dimensions Model 37/38 Spring Diaphragm Actuator Direct (37) Air to Close Reverse (38) Air to Open Direct (37) Air to Close Type 8A Handwheel Reverse (38) Air to Open Model 37/38 Actuator (inches) Actuator Side-Mounted Handwheel Actuator Size Removal D E F Type G H J Clearance Dir. Rev. Dir. Rev max 8A max 8A 12 * 1 2" NPT for No. 24 Actuator 56 max 66 max Model 37/38 Actuator (mm) Actuator Side-Mounted Handwheel Actuator Size Removal D E F Type G H J Clearance Dir. Rev. Dir. Rev max 8A max 8A 305 * 1 2" NPT for No. 24 Actuator 1425 max 1667 max Series 23

24 Actuator Dimensions Model 84/85/86 Cylinder Actuator Model 84/85/86 Actuator (inches) Actuator Size K L M N Actuator removal clearance = 6 inches Actuator removal clearance with handjack = 7.2 inches Model 84/85/86 Actuator (mm) Actuator Size K L M N Actuator removal clearance = 150 mm Actuator removal clearance with handjack = 180 mm Series 24

25 Weights Body S/A Weights (lbs) inches Valve Size mm Flanged Connection Threaded / Welded Connection ANSI Class ANSI Class ANSI Class ANSI Class ANSI Class ANSI Class ANSI Class 150, 300 and 600 and 900 and 1500 and 600 and 900 and 1500 and equivalent PN equivalent PN equivalent PN equivalent PN equivalent PN equivalent PN equivalent PN Body S/A Weights (kg) inches Valve Size mm Flanged Connection Threaded / Welded Connection ANSI Class ANSI Class ANSI Class ANSI Class ANSI Class ANSI Class ANSI Class 150, 300 and 600 and 900 and 1500 and 600 and 900 and 1500 and equivalent PN equivalent PN equivalent PN equivalent PN equivalent PN equivalent PN equivalent PN Model 87/88 Spring Diaphragm Actuator (lbs) Size Standard With Handwheel Model 87/88 Spring Diaphragm Actuator (kg) Size Standard With Handwheel Series 25

26 Weights Model 37/38 Spring Diaphragm Actuator (lbs) Size Standard With Handwheel Direct Reverse Direct Reverse max max Model 37/38 Spring Diaphragm Actuator (kg) Size Standard With Handwheel Direct Reverse Direct Reverse max max Model 84/85/86 Cylinder Actuator (lbs) Actuator Size Base Weight Small Spring Large Spring Medium Spring Handjack Model 84/85/86 Cylinder Actuator (kg) Actuator Size Base Weight Small Spring Large Spring Medium Spring Handjack Series 26

27 Options Options Extension Bonnets Environmental Capabilities (LE Packing) Lubricator & Isolation Valve Other Flange Facings Limit Stops Body Drain Plug Reducer and Nipple Connections NACE Compliance Custom Trim Materials U.O.P. Trim Materials Other Materials Soft Seat (IEC and ANSI Class VI) Non-Destructive Examination Oxygen Cleaning Electric Actuators For Accessories and additional Options, consult Masoneilan Series 27

28 BELGIUM Dresser Valves Europe Boulevard du Souverain 207 B2 Vorstlaan, B-1160 Brussels, Belgium Phone: Fax: BRAZIL Dresser Industria e Comercio Ltda Divisao Masoneilan Rua Funchal, Conj. 5A Sao Paulo - SP Brazil Phone: Fax: CANADA Ontario Dresser - Masoneilan DI Canada, Inc. 835 Harrington Court, 2nd Floor Burlington, Ontario L7N 3P3, Canada Phone: Fax: CHINA Dresser Flow Solutions Beijing Rep. Office Suite 1703, Capital Mansion 6 Xinyuannan Rd. Chaoyang District Beijing , China Phone: Fax: FRANCE Masoneilan - Dresser Produits Industriels Energy 5 130/190 Boulevard de Verdun Courbevoie cedex, France Phone: Fax: Dresser Produits Industriels S.A.S., Masoneilan Customer Service Centre 55 rue de la Mouche, Zone Industrielle Irigny, France Phone: Fax: GERMANY Dresser Valves Europe GmbH Heiligenstrasse 75 Viersen D-41751, Germany Phone: Fax: Dresser Valves Europe GmbH Uhlandstrasse Frankfurt, Germany Phone: Fax: INDIA Dresser Valve India Pvt. Ltd. 305/306, Midas, Sahar Plaza Mathurdas Vasanji Road J.B. Nagar, Andheri East Mumbai, , India Phone: Fax: Dresser Valve India Pvt. Ltd. 205, Mohta Building 4 Bhikaiji Cama Place New Delhi, , India Phone: Fax: ITALY Dresser Italia S.r.l. Masoneilan Operations Via Cassano, Casavatore, Napoli Italy Phone: Fax: JAPAN Niigata Masoneilan Co. Ltd. (NIMCO) 20th Floor, Marive East Tower WBG 2-6 Nakase, Mihama-ku, Chiba-shi, Chiba Japan Phone: Fax: KOREA Dresser Korea Inc Kuk Dong Building 60-1, ChoongMoo-ro 3-ka Joong-gu, Seoul, Korea Phone: Fax: KUWAIT Dresser Flow Solutions Middle East Operations 10th Floor, Al Rashed Complex Fahad Salem Street, P.O. Box 242 Safat, 13003, Kuwait Phone: Fax: MALAYSIA Dresser Flow Solutions Business Suite, 19A-9-1, Level 9 UOA Centre, No. 19, Jalan Pinang Kuala Lumpur, West Malaysia Phone: Fax: MEXICO Dresser Valve de Mexico, S.A. de C.V. Henry Ford No. 114, Esq. Fulton Fraccionamiento Industrial San Nicolas Tlalnepantla Estado de Mexico Phone: Fax: THE NETHERLANDS Dresser Valves Europe Steenhouwerstraat AG Hoogvliet, The Netherlands Phone: Fax: RUSSIA DS Controls Nekhinskaya Street, 61 Veliky Novgorod Russia, Phone: Fax: Dresser Moscow Derbenevskaya ulitsa 1 Building 3, Office Moscow, Russia Phone: Fax: SAUDI ARABIA Dresser AL Rushaid Valve & Instrument Co., Ltd. (Darvico) P.O. Box Jubail Industrial City 31961, Saudi Arabia Phone: Fax: SINGAPORE Dresser Singapore Pte Ltd. 16 Tuas Avenue 8 Singapore Phone: Fax: SOUTH AFRICA Dresser Limited P.O. Box Edendale Road Eastleigh, Edenvale 1610 Republic of South Africa Phone: Fax: SOUTH & CENTRAL AMERICA AND THE CARIBBEAN Dresser Masoneilan Port Northwest Drive Houston, TX Phone: Fax: SPAIN Masoneilan S.A. C/Murcia 39 C Sant Boi de Llobregat Barcelona, Spain Phone: Fax: UNITED ARAB EMIRATES Dresser Flow Solutions Middle East Operations P.O. Box Roundabout 8 Units JA01 & JA02 Jebel Ali Free Zone Dubai, U. A. E. Phone: Fax: Sales Office Locations UNITED KINGDOM DI U.K. Ltd. East Gillibrands Skelmersdale, Lancashire WN8 9TU, England Phone: Fax: DI U.K. Ltd. Unit 4, Suite 1.1, Nobel House Grand Union Office Park Packet Boat Lane Uxbridge, Middlesex UB8 2GH Phone: Fax: UNITED STATES Dresser - Masoneilan 85 Bodwell Street Avon, MA Phone: Fax: Dresser - Masoneilan 4841 Leopard Street Corpus Christi, TX Phone: Fax: Dresser - Masoneilan Dresser Direct 1250 Hall Court Deer Park, TX Phone: Fax: Dresser Flow Solutions (Contractor Sales) Port Northwest Drive Houston, TX Phone: Fax: Dresser - Masoneilan Mora Drive, Unit 2 Santa Fe Springs, CA Phone: Fax: Copyright 2006 Dresser, Inc. All rights reserved Series