Design HP and HPA 1-through 6-Inch Globe Valves 1- through 2-Inch Angle Valves

Size: px
Start display at page:

Download "Design HP and HPA 1-through 6-Inch Globe Valves 1- through 2-Inch Angle Valves"

Transcription

1 July 99 Bulletin 5.:HP Design HP and HPA -through 6-Inch Globe Valves - through -Inch Angle Valves Design HP (Globe Valve)! Design HPD,! Design HPS, and! Design HPT Design HPA (Angle Valve)! Design HPAD,! Design HPAS, and! Design HPAT HP Series control valves (figure ) are globe- or anglestyle valves. These valves are designed for high-pressure applications in process control industries such as power generation, hydrocarbon production, chemical processing, and refining. Standard features offered with HP Series valves include rugged cage guiding, easy maintenance, full pressure drop capability, spiralwound gaskets, and hardened trim materials. HP Series valves are designed with corrosion allowance; NACE approved materials are available. Extra body wall thickness provides a safety margin of protection against erosion, as well as extra protection against corrosion due to chemical attack. Because these valves feature a thicker valve body wall, both HP and HPA valves are available with intermediate ratings. Design HPD and HPAD control valves use a balanced valve plug and are well suited for general applications with process temperatures in excess of 3"C (45"F), where extremely tight shutoff is not required. Design HPS and HPAS control valves have an unbalanced plug and provide excellent shutoff. Design HPT and HPAT control valves use a balanced valve plug and offer excellent shutoff with process temperatures below 3"C (45"F). The temperature limits of Design HPT can be extended above 3"C (45"F) to 36"C (6"F) by using PEEK (PolyEtherEtherKetone) anti-extrusion rings in combination with a springloaded PTFE seal. The PEEK anti-extrusion rings expand to close off the clearance gaps on the plug O.D. and the cage I.D. where the PTFE seal may extrude at high temperatures and pressures. W6848/IL Figure. Design HP Valve with Type 667 Actuator and FIELDVUE # Digital Valve Controller Expanded ends are available on the 4- and 6-inch Class 9 and 5 HP valves. The 4-inch HP valve body is offered with 6-inch ends. The 6-inch is offered with 8-inch ends. Both flanged and buttweld end valve bodies are offered with expanded ends. D635X

2 Specifications Available Configurations () Common Characteristics: Design HP and HPA valves are single-port, high-pressure, globe-style valves with metal seats, cage guides, and pushdown-to-close valve plug action. They are designed per industry standards: $ ASME B6.34 Valve Flanges, Threaded and Welding End, and $ ANSI/ ISA S75., 5, and 6 Control Valve Face-to-Face dimensions () Designs HPD and HPAD: Uses a balanced valve plug with graphite piston rings - through 6-inch HPD and -inch HPAD: Standard valve plug with standard (equal percentage, modified equal percentage, or linear) for Class 9 and 5, or Whisper Trim # III cage for Class 9, 5, and 5 (-inch HPD and HPAD only) Designs HPS and HPAS: Uses an unbalanced valve plug design $ -Inch HPS and HPAS: Micro-Form% and Micro-Flute% valve plug (equal percentage) and standard valve plug, for Class 9, 5, and 5 or $ Cavitrol # III, -stage cage for Class 9, 5, and 5 (HPAS only) $ - and -Inch HPAS Flow Down: Micro-Flat% valve plug (linear), $ Micro-Flute valve plug (equal percentage) for Class 9 and 5, or $ Equal Percentage Characterized cage for Class 9, 5, and 5 (HPAS only) $ -Inch HPS and HPAS: Micro-Form valve plug (equal percentage) for Class 9, 5, and 5 $ - through 3-Inch HPS and -Inch HPAS: Standard valve plug with standard (equal percentage, modified equal percentage, or linear) for Class 9, 5, and 5 (-inch HPS and HPAS only) or Whisper Trim III cage or Cavitrol III three stage cage for Class 9, 5, and 5 (-inch HPS and HPAS only) Designs HPT and HPAT: Uses a balanced valve plug design with a pressure-assisted PTFE seal ring $ - through 6-Inch HPT and -Inch HPAT: Standard valve plug with standard (equal percentage, modified equal percentage, or linear), for Class 9, 5, and 5 (-inch HPT and HPAT only) or Whisper Trim III, or Cavitrol III two stage cage for Class 9, 5, and 5 (-inch HPT and HPAT only) Valve Sizes Design HP: $ -, $ -, $ 3-, $4-, and $ 6-inch Design HPA: $ - and $ -inch valves End Connections Styles () All Design HP configurations are available in -, through 6-inch valves, Class 9 and 5 (3). All - Continued - Design HPA configurations are available in - and -inch valves only, Class 9, 5, and 5 () WCC, WC9, and LCC Cast Steel Valves $ Buttwelding ends (BWE), $ Socket Weld Ends (SWE), and $ Flanged Ends (ring-type joint (RTJ) or $ Raised-Face [RF] flanges CF8M (36 Stainless Steel) Valves $ Socket Weld Ends (SWE), and $ Flanged Ends (ring-type joint (RTJ) or $ raised-face [RF] flanges SA-5 and SA-8-F for Forged Steel HPA Class 5 Angle Valves Socket Weld Ends (SWE) only Maximum Inlet Pressure and Temperature (,3) As listed below, unless limited by maximum pressure drop or material temperature capabilities Flanged: Consistent with Class 9, 5, and 5 for flanged end connections according to ASME B6.34 Socketwelding: Consistent with Class 9, 5, and 5 for socketweld end (SWE) connections according to ASME B6.34 Buttwelding: Consistent with Class 9, 5, and 5 for buttweld end (BWE) connections according to ASME B6.34. In addition, both steel HP and HPA valves with BWE and SWE connections have increased pressure/temperature ratings as shown in tables and Maximum Pressure Drop () Valve with Standard Cage: See figures 3 and 4 Valve with Cavitrol III Cage: 49 bar (6 psi) for two-stage and 7 bar (3 psi) for three-stage cage. Consult Fisher Controls Bulletin 8.:8, Cavitrol III Two- and Three-Stage trims, for more information Valve with Whisper Trim III Cage: $.6!P/P maximum for level A $.75!P/P maximum for levels B and B3 $.85!P/P maximum for level C3 $.99!P/P maximum for level D3 Shutoff Classifications See table 3 Construction Materials Body and Bonnet: WCC steel (4), WC9 Cr-Mo steel (4), CF8M stainless steel, and LCC for low temperature service Trim: Trim materials are listed in tables 6, 7, and 8. Special materials for trim and valve body are available, Consult your Fisher Controls sales office or sales representative. Other Parts: see table 9

3 Specifications (continued) Material Temperature Capabilities () Designs HPD, HPAD, HPS, and HPAS: Up to 566"C (5"F) unless limited by selection of standard trim materials (tables 6 and 8, and figures 3 and 4), Cavitrol III and Whisper Trim III trim materials (tables 6 and 8), or other parts (table 9) Designs HPT and HPAT: Up to 3"C (45"F) unless limited by selection of standard trim materials (tables 6 and 8 and figure 4), Cavitrol III and Whisper Trim III trim materials (tables 6 and 8), or other parts (table 9) Flow Characteristics Standard Cage: $ Equal percentage, $ Modified equal percentage (6) or, $ Linear Standard Cage with Micro-Form Valve Plug (for Designs HPS and HPAS only): $ Equal percentage or $ Modified equal percentage Standard Cage with Micro-Flute Valve Plug (Designs HPS and HPAS only): $ Equal percentage or $ Modified equal percentage Standard Cage with Micro-Flat Valve Plug (Design HPAS only): $ Linear Cavitrol III or Whisper Trim III Cage: $ Linear Special Cages: Special characterized flow cages are available by consulting your Fisher Controls sales office or sales representative Flow Direction Standard Cage $ Design HPD & HPAD: Normally flow down $ Design HPS & HPAS: Normally flow up (7) $ Design HPAS Micro-Flat: Flow down $ Design HPS & HPAS Micro-Form: Flow up only $ Design HPT & HPAT: Normally flow down Cavitrol III Cage: Flow down Whisper Trim III Cage: Flow up Flow Coefficients Design HP (Globe Valve) $ -inch (Modified Equal Percentage) 5.4 C v max. $ -inch (linear): 55.3 C v maximum $ 3-inch (linear): 7 C v maximum $ 4-inch (linear): C v maximum $ 6-inch (linear): 45 C v maximum Design HPA (Angle Valve) Class 5 $ -inch (Modified Equal Percentage) 7 C v max. $ -inch (linear): 76 C v maximum Design HPA (Angle Valve) Class 5 $ -inch (Modified Equal Percentage) 4.3 C v max. $ -inch (linear): 47.4 C v maximum Refer to Fisher Controls Catalog for flow coefficients Noise Levels See Fisher Controls Catalog, Section 3 for noise prediction methods Port Diameter See tables 4,, and Valve Plug Travel and Stem Diameters See tables 4,,, and Bonnet Style and Mounting $ Standard Bonnet: See figures and for Design HP -, -, 3-, 4-, and 6-inch valve sizes and see figure 8 for Design HPA - and -inch valve sizes Yoke Temperature Limit: Standard bonnet with cast iron yoke is limited to 537"C ("F) $ Optional Style Extension Bonnet: Used for - and -inch valves for ANSI Class 9 or 5, -inch valves for ANSI Class 5, and for Designs HP and HPA valves only (see figures 6 and 7) Packing Arrangements $ Single, $ Double, and $ Leakoff standard packing, or optional $ ENVIRO-SEAL # and $ HIGH-SEAL% packing systems. See figure. Also see Fisher Controls bulletin 59.:6, ENVIRO-SEAL and HIGH-SEAL Packing System for Sliding-Stem Valves Yoke Boss Diameter for Actuator Mounting See tables 4 and 3, and figures 5 through 7 Approximate Weight See table 5 Options $ Valves with weld-end fittings have increased pressure/temperature ratings, called intermediate ratings (8), $ Class V (8) shutoff for HPT to 36"C (6"F) using PEEK anti-extrusion rings, $ Class V shutoff for HPD to 593"C ("F) using C-seal trim, $ expanded ends (8) for 4- and 6-inch valves (4-inch valves are available with 6-inch ends, and 6-inch valves are available with 8-inch ends), $ lubricator or lubricator/isolating valve (8). The pressure/temperature limits in this bulletin and any applicable standard limitations should not be exceeded.. ANSI/ISA S75., 5, and 6 do not apply to HPA valves. 3. DIN (or other) ratings and end connections can usually be supplied; consult your Fisher Controls sales office or sales representative. 4. SA-5 and SA-8-F are used for Class 5 HPA valves instead of WCC and WC9. 5. Class 9 and 5, size - and -inch valve dimensions are identical. Class 9 and 5, size 3-, 4-, and 6-inch valve dimensions are not identical. 6. Modified equal percentage characteristic is equal-percentage for the first 75% of travel, then open quickly for additional capacity. 7. Design HPS valves may be used flow down for on-off service only. Design HPAS valves may be used for flow down in erosive service. 8. For more information contact your Fisher Controls sales office or sales representative or see PS Sheet 59.:6(B), Intermediate Ratings for Design HP and HPA Class 5 All Sizes. 3

4 To eliminate cavitation damage in a properly-sized valve, a Cavitrol III cage is available with either Design HPS, HPAS or HPT, HPAT control valves. To help attenuate aerodynamic noise in gaseous service, Whisper Trim III cages are available with Design HPD, HPAD, HPS, HPAS, HPT, and HPAT control valves. Features! Valve Plug Stability Rugged cage guiding provides increased valve plug stability, which reduces vibration and other mechanical stresses, contributing to longer trim life.! Full Pressure Drop Capability Rugged Design HP and HPA valves have readily available trims capable of attaining full pressure drops.! Spiral-Wound Gaskets for Excellent Sealing Under All Service Conditions Premium materials are used in the construction of spiral-wound gaskets for HP Series valves. These premium materials, which make up the standard spiral-wound gaskets, are N66 (Inconel 6)/graphite or N775 (Inconel X75)/graphite.! Compliance with the Clean Air Act Optional ENVIRO-SEAL packing systems (figure ) provide a superior stem seal to prevent the loss of valuable or hazardous process fluid. The ENVIRO-SEAL packing systems feature PTFE, graphite, or duplex packing with live-loading for reduced packing maintenance.! Piping Economy The availability of expanded end connections on 4- and 6-inch Design HP valves may eliminate the need for line swages while accommodating oversized piping arrangements.! Quick Change Trim Maintenance is simple and can easily be performed using common tools. Trim components can be quickly removed and changed with no need for special tools.! Standard Hard Trim Materials The cage, valve plug, and other trim parts are manufactured from hardened materials. This standard feature provides excellent wear resistance.! Control of Low Flow Rates/Tight Shut-off Micro-Flute and Micro-Form valve plugs (figures 3 and 4, respectively) provide superb rangeability in high-pressure, low-flow applications. A choice of several restricted port diameters helps match body capacity to required flow, assures necessary control with full travel, and helps prevent throttling near the seat. In low-flow applications where cavitation damage may occur, the Micro-Flat valve plug can be used with a special Cavitrol III cage. Contact your Fisher Controls sales office or sales representative for more information.! Increased Pressure/Temperature Ratings Design HP Series valves with weld-end fittings have increased pressure/temperature ratings, called intermediate ratings, as defined in ASME B6.34. The extra strength of these valves allows ratings higher than the standard Class 9 or 5 ratings specified in B6.34. See PS Sheet 59.:6(B), Intermediate Ratings for Design HP and HPA Class 5 All Sizes, for further information.! Trim Interchangeability Cavitrol III and Whisper Trim III trims (figures 5 and 6, respectively) are interchangeable with standard trims.! Smooth Control at High Pressure Drops Available on through 6-inch valves, balanced trim provides smooth control at high pressure drops.! High-Temperature Capability with Class V Shutoff Use of C-seal trim (see figure ) permits Class V shutoff up to 593"C ("F) for Design HPD valves.! Sour Gas Trims Available Long-lasting, erosion- and corrosion-resistant trims are available for control of sour gas. These trims are offered with either a standard cage, a Cavitrol III cage, or a Whisper Trim III cage. Spiral wound gasket construction is standard. Trim Selection Guidelines Refer to the following descriptions as a guideline for the selection of appropriate trims. Trims B, 4,, and 3 should not be used in boiler feedwater due to amine corrosion problems associated with CoCr-A and R36 (alloy 6).! Trim Trim is the standard trim for carbon steel and alloy steel bodies. Trim A, with an S46 (46 stainless steel) heat-treated seat ring, is recommended for general and severe service applications up to 47"C (8"F) for the and -inch valve size and up to 343"C (65"F) for the 3 through 6-inch valve size. Trim B, with an S36/CoCr-A seat ring, is recommended for the same applications up to 47"C (8"F) for the 3 through 6-inch valve size only. Typical applications for Trim include services in boiler feedwater (Trim A only), water, non-sour hydrocarbons, and steam. The S46 heat-treated plug and seat ring have a minimum hardness of 38 HRC (Rockwell C), as compared to CoCr-A with a minimum hardness of 36 HRC.! Trim 4 Trim 4 should be used for sour gas service or moderately corrosive service. Standard stem material, S9 (Nitronic 5 grade XM SST) 4

5 W587-- / IL W585-- / IL Figure. Design HPD Valve Assembly Figure 4. Design HPS Trim with Micro-Form Valve Plug W586-- / IL Figure 3. Design HPS Trim with Micro-Flute Valve Plug meets the requirements for NACE applications. Not for boiler feedwater use if amine problems exist.! Trim Trim is designed primarily for use in all high temperature applications between 47"C (8"F) and 566"C (5"F), but can also be used between -"C (-"F) and 47"C (8"F). Not for boiler feedwater use if amine problems exist. W588-- / IL Figure 5. -Inch Design HPS Trim with Cavitrol III Three Stage Cage Trim is recommended for use in 6-inch valves between --"C (--"F) and 343"C (65"F). Trim A is recommended for use in 6-inch valves between 6"C (5"F) and 566"C (5"F).! Trim 3 Trim 3 is the standard trim for stainless steel body materials. It should only be used with stainless steel body material. Not for boiler feedwater use if amine problems exist. 5

6 W595-- / IL Figure 6. Design HPT Trim with Whisper Trim III Level A Cage (Available in Design HPD [-6 Inch] and Design HPS [- and 3-Inch]) W6-- / IL Figure 8. Design HPAD Valve Assembly W6-- / IL W595-- / IL Figure 7. 4-Inch Design HPD Trim with Whisper Trim III Level D Cage C-seal Trim Description C-seal trim is available for Design HPD valves with port diameters from -7/8 inches through 8 inches. With C-seal trim, a balanced valve can achieve hightemperature, Class V shutoff. Because the C-seal plug seal is formed from metal (N778 nickel alloy, Inconel 78) rather than an elastomer, a valve equipped with the C-seal trim can be applied in processes with a fluid temperature of up to 593"C ("F). Figure 9. Design HPAS Trim with Micro-Flat Valve Plug Fisher TSO (Tight Shutoff) Trim Capabilities TSO trim is available for Design HPS and HPT valves with port diameters as defined in table 4. Also see figure and table 3. TSO trim consists of a protected soft seat plus PEEK anti-extrusion rings with a spring-loaded PTFE plug seal. Used only in flow down applications, TSO trim offers unparalleled shutoff integrity, resulting in longer plug and seat life. For additional information contact your Fisher Controls sales representative or sales office. 6

7 Table. Increased Pressure/Temperature Ratings for Steel Globe Valves with BWE and SWE Connections Valve Size, Inches Class Intermediate Rating (ASME B6.34) 9 & & Table. Increased Pressure/Temperature Ratings for Steel Angle Valves with BWE and SWE Connections Valve Size, Inches Class Intermediate Rating (ASME B6.34) 9 & & Table 3. Shutoff Classifications per ANSI/FCI 7- Valve Design Port Diameter, mm (Inches) ANSI Leakage Class 47.6 (-7/8) and smaller II HPD, HPAD 58.7 (-5/6) to 9. (3-5/8) II - Standard. (4-3/8) and larger III - Optional Design HPD w/ C-seal trim Valve Size, Inches Port Diameter, mm (Inches) Cage Style ANSI Leakage Class 3 73 (-7/8) 4 6 HPS, HPAS, HPT, HPAT HPS & HPT w/ TSO (Tight Shutoff trim) HPT w/ PEEK () Anti-Extrusion Rings. PEEK (PolyEtherEtherKetone) 73 (-7/8) Eq. %, Mod. Eq. %, Linear (std. cage), Linear (Whisper III, A, B) Linear (Whisper III, D3) Linear (Cav III, 3-stage) 87.3 (3-7/6) Linear (Cav III, -stage) V to 593"C ("F) 9. (3-5/8). (4-3/8) 36.5 (5-3/8) All Eq. %, Mod. Eq. %, Linear (std. cage), Linear (Whisper III, A, B3, C3) Linear (Whisper III, D3), Linear (Cav III, 3-stage) Eq. %, Mod. Eq. %, Linear (std. cage), Linear (Whisper III, A, B3, C3), Linear (Cav III, -stage) Cavitrol III and Micro-Flat Micro-Form and Micro-Flute See table 4 See table 4 (for port diameters from 73 mm [-7/8 inch] through 36.5 mm [5-3/8 inch] with optional C-seal trim) V - Standard IV - Standard V - Optional TSO - Optional TSO is not an ANSI leakage class. Valves with TSO trim are factory tested to a more stringent Fisher Controls test requirement of no leakage at time of shipment. Test medium is water. Specify service!p when ordering. Test procedure is ANSI/FCI Class V test procedure B 47.6 (-7/8) to 36.5 (5-3/8) All V to 36"C (6"F) 7

8 Table 4. Port Diameters, Valve Plug Travel, Yoke Boss Diameters for TSO (Tight Shutoff) Trim PORT DIAMETER MAX TRAVEL YOKE BOSS SIZE C V REDUCTION VALVE TYPE TRIM Nominal Actual TSO AT % mm Inch mm Inch mm Inch mm Inch TRAVEL () Balanced Plugs Flow Down Only HPT 3-Inch () CAV III 3-Stage / / /6 5% HPT 4-Inch CAV III 3-Stage HPT 6-Inch CAV III 3-Stage 4 Standard / / / / /6 % 6 4-9/6 4-3/8 % / /6 4% Unbalanced Plugs Flow Down Only HPS -Inch CAV III 3-Stage /6 6. 3/6 %. This column lists the percent reduction of published maximum C V of the trim listed in the TRIM column.. Not available with 5-inch yoke boss. temperature must always be limited by the applicable ASME pressure/temperature rating.. Select the desired trim style from the Available Configurations specification and from the shutoff classifications listed table 3. VALVE PLUG SEAL 3. Select desired materials from tables 6, 8, 9,, and and figures 3 and 4. The temperature capabilities determined from figures 3 and 4 may be further limited by the temperature capabilities of materials selected from tables 6, 8, and 9. Refer to figures 3 and 4 to determine pressure drop limits of the body-trim combinations selected. 4. Select the appropriate spiral-wound gasket material. N66 is recommended for service up to 47"C (8"F). N775 is recommended for service over 47"C (8"F) when improved corrosion resistance is required or when the valve is subject to severe temperature cycling service. W7- / IL Figure. Typical Balanced TSO Trim Material Selection Guidelines TSO PROTECTED SOFT SEAT SEAL Use the following steps as a guideline for the selection of materials:. Determine the pressure/temperature rating of the body size and material required. Inlet pressure and Installation The valve must be installed so flow through the valve is as indicated by the flow direction arrow on the body. Consideration should be given to installing an upstream strainer, especially if the valve uses a Whisper Trim III or Cavitrol III cage. Overall dimensions are shown in figures 5, 6, and 7. Face-to-face dimensions are in compliance with ANSI/ISA-S75. Actual end connection dimensions conform to ASME B6.5 for buttwelding ends and to AS- ME B6.5 for flanged ends. 8

9 PACKING BOX STUD PACKING BOX STUD SPRING SPRINGS PACKING PACKING FOLLOW- ER FOLLOWER VALVE BONNET W58--3 / IL TYPICAL HIGH--SEAL PACKING SYSTEM WITH GRAPHITE PACKING W / IL TYPICAL ENVIRO--SEAL PACKING SYSTEM WITH GRAPHITE PACKING PACKING BOX STUDS SPRINGS ANTI-- EXTRUSION RING PACKING RING LANTERN RING VALVE BONNET W / IL TYPICAL ENVIRO--SEAL PACKING SYSTEM WITH PTFE PACKING W78- / IL TYPICAL ENVIRO-SEAL PACKING SYSTEM WITH DUPLEX PACKING Figure. ENVIRO-SEAL and HIGH-SEAL Packing Systems 9

10 Table 5. Approximate Weights (Valve and Bonnet Assemblies) VALVE SIZE, KILOGRAMS POUNDS VALVE TYPE CLASS INCHES Flg SWE & BWE Flg SWE & BWE 9 & x & Globe Valves & () () Angle Valves 9 & () (). Only SWE is available for Class 5. STAKE THREAD PISTON RING RETAINER C-SEAL METAL PLUG SEAL () VALVE PLUG DOWN NOTES :. REVERSE THE ORIENTATION OF THE C-SEAL PLUG SEAL FOR PROPER SHUTOFF WHEN VALVE IS USED IN A PRO- CESS WITH DIFFERENT FLUID DIRECTION. C-SEAL METAL PLUG SEAL () A6869 / IL UP Figure. C-seal Trim

11 Table 6. Trim Material Combinations Design HP Class 9 and 5 Globe Valve (- to 6-Inch) A DESIGNATION VALVE PLUG CAGE SEAT RING B (for Sizes 3, 4, and 6 only) S46 (46 SST) heat-treated S44 (44C SST) heat-treated for Micro-Flute valve plugs S46 (46 SST) heat-treated 4 (NACE) (,) S36 with CoCr-A Design HPD and HPS valves only H (for Design HPD size 6 only) (5) S36 (36 stainless steel) with CoCr-A S36 (36 stainless steel) with CoCr-A 3 (NACE )(,) S36 with CoCr-A S36 with CoCr-A 5A S44 heat-treated/ S9 stem 5B S44 heat-treated/ S36 stem 6 (NACE) (,) S36 with CoCr-A 7A 7B 8 8H (for Design HPD size 6 only) (5) S46 heat-treated S46 heat-treated S36 with CoCr-A S36 with CoCr-A 9 (NACE) (,) S36 with CoCr-A S7 (7-4 SST) H75 heat-treated S7 (7-4 SST) H75 heat-treated S7 Double H5 heat-treated With Standard Cage F Cr-Mo alloy steel ion nitrided F Cr-Mo alloy steel ion nitrided S36/hard Cr coat S46 heat-treated Bulletin 5.:HP VALVE BODY MATERIAL () WCC, LCC, WC9 OPERATING TEMPERATURE RANGE Degrees Celsius - to 343 (for Sizes 3, 4, and 6) - to 47 (for Size and ) Degrees Fahrenheit - to 65 (for Size 3, 4, and 6) - to 8 (for Size and ) S36/CoCr-A WCC, LCC, WC9 343 to to 8 S36/CoCr-A WCC, LCC, WC9-46 to to 65 S36/CoCr-A WCC, LCC, WC9 - to to 5 S36/CoCr-A WCC, LCC, WC9 - to to 5 S36/CoCr-A CF8M -73 to to S7 H75 S36/CoCr-A WCC, LCC, WC9 - to to 65 With Cavitrol III Trim Cage S7 H75 heat-treated S44 WCC, LCC, WC9 to 3 (3) 3 to 45 (3) S7 H75 heat-treated S44 WCC, LCC, WC9 to 3 (3) 3 to 45 (3) S7 Double H5 heat-treated S36/CoCr-A WCC, LCC, WC9-46 to 3 (3) -5 to 45 (3) With Whisper Trim III Cage S7 H75 heat-treated S7 H75 heat-treated F steel ion nitrided F steel ion nitrided S7 Double H5 heat-treated S46 heat-treated. If using valve body/trim combinations other than those listed, consult your Fisher Controls sales representative or sales office.. National Association of Corrosion Engineers (MR75). 3. -inch stage and -inch 3 stage HPS can be used at temperatures up to 343"C (65"F). 4. -inch and -inch can be used at temperatures up to 47"C (8"F). 5. Trims H and 8H have clearances for high-temperature service. WCC, LCC, WC9 - to 343 (4) - to 65 (4) S36/CoCr-A WCC, LCC, WC9 343 to to 8 S36/CoCr-A WCC, LCC, WC9 - to to 5 S36/CoCr-A WCC, LCC, WC9 - to to 5 S36/CoCr-A WCC, LCC, WC9-46 to to 65

12 Table 7. Trim Material Combinations Design HP Class 5 Globe Valve (- to -Inch) DESIGNATION VALVE PLUG CAGE SEAT RING S46 (46 SST) heat-treated S44 (44C SST) A heat-treated for Micro-Flute valve plugs 4 (NACE) (,) S36 with CoCr-A Design HPD and HPS valves only S36 (36 stainless steel) with CoCr-A 3 (NACE )(,) S36 with CoCr-A S36 with CoCr-A 5A S44 heat-treated/ S9 stem 5B S44 heat-treated/ S36 stem 6 (NACE) (,) S36 with CoCr-A 7A 7B S46 heat-treated S46 heat-treated S36 with CoCr-A 8 9 (NACE) (,) S36 with CoCr-A S7 (7-4 SST) H75 heat-treated S7 Double H5 heat-treated With Standard Cage F Cr-Mo alloy steel ion nitrided S36/hard Cr coat S46 heat-treated VALVE BODY MATERIAL () WCC, LCC, WC9 OPERATING TEMPERATURE RANGE Degrees Celsius - to 343 (for Sizes 3, 4, and 6) - to 47 (for Size and ) Degrees Fahrenheit - to 65 (for Size 3, 4, and 6) - to 8 (for Size and ) S36/CoCr-A WCC, LCC, WC9-46 to to 65 S36/CoCr-A WCC, LCC, WC9 - to to 5 S36/CoCr-A CF8M -73 to to S7 H75 S36/CoCr-A WCC, LCC, WC9 - to to 65 With Cavitrol III Trim Cage S7 H75 heat-treated S44 WCC, LCC, WC9 to 3 (3) 3 to 45 (3) S7 H75 heat-treated S44 WCC, LCC, WC9 to 3 (3) 3 to 45 (3) S7 Double H5 heat-treated S36/CoCr-A WCC, LCC, WC9-46 to 3 (3) -5 to 45 (3) With Whisper Trim III Cage S7 H75 heat-treated S7 H75 heat-treated F steel ion nitrided S7 Double H5 heat-treated S46 heat-treated. If using valve body/trim combinations other than those listed, consult your Fisher Controls sales representative or sales office.. National Association of Corrosion Engineers (MR75). 3. -inch stage and -inch 3 stage HPS can be used at temperatures up to 343"C (65"F). 4. -inch and -inch can be used at temperatures up to 47"C (8"F). WCC, LCC, WC9 - to 343 (4) - to 65 (4) S36/CoCr-A WCC, LCC, WC9 343 to to 8 S36/CoCr-A WCC, LCC, WC9 - to to 5 S36/CoCr-A WCC, LCC, WC9-46 to to 65

13 Table 8. Trim Material Combinations Design HPA Class 9, 5, and 5 Angle Valve (- to -Inch) DESIGNATION VALVE PLUG CAGE SEAT RING A S46 (46 SST) heat-treated for Micro-Form and flow down HPAS valve plugs S44 (44C SST) heat-treated for Micro-Flute and Micro-Flat valve plugs S36 with CoCr-A 4 (NACE) (,) Design HPAD and HPAS valves only S36 (36 stainless steel) with CoCr-A S36 with CoCr-A 3 (NACE) (,) S36 with CoCr-A 5A S44 heat-treated/ S9 stem 5B S44 heat-treated/ S36 stem 6 (NACE) (,) S36 with CoCr-A 7A S46 heat-treated S36 with CoCr-A 8 9 (NACE) (,) S36 with CoCr-A S7 (7-4 SST) H75 heat-treated S7 Double H5 heat-treated F Cr-Mo alloy steel ion nitrided S36/hard Cr coat With Standard Cage S46 heat-treated seat ring. S44 heat-treated seat ring for Micro-Flat valve plugs. S44 heat-treated seat and liner S36/CoCr-A (Alloy 6) seat ring R36 (Alloy 6) seat ring for Micro-Flat valve plugs. R36 seat and liner S36/CoCr-A seat ring R36 (Alloy 6) seat ring for Micro-Flat valve plugs R36 seat and liner S36/CoCr-A seat ring R36 (Alloy 6) seat ring for Micro-Flat valve plugs. R36 seat and liner Bulletin 5.:HP VALVE BODY MATERIAL () WCC, LCC, WC9 WCC, LCC, WC9 WCC, LCC, WC9 WCC, LCC, WC9 WCC, LCC, WC9 WCC, LCC, WC9 CF8M CF8M OPERATING TEMPERATURE RANGE Degrees Celsius Degrees Fahrenheit - to 47 - to 8-46 to to 65 - to to 5-73 to to S7 H75 S36/CoCr-A WCC, LCC, WC9 - to to 65 With Cavitrol III Trim Cage S7 H75 heat-treated S44 seat ring WCC, LCC, WC9 to 3 (3) 3 to 45 (3) S7 H75 heat-treated S44 seat ring WCC, LCC, WC9 to 3 (3) 3 to 45 (3) S7 H5 heat-treated S36/CoCr-A seat ring WCC, LCC, WC9-46 to 3 (3) -5 to 45 (3) With Whisper Trim III Cage S7 H75 heat-treated F steel ion nitrided S7 Double H5 heat-treated S46 heat-treated seat ring. If using valve body/trim combinations other than those listed, consult your Fisher Controls sales representative or sales office.. National Association of Corrosion Engineers (MR75). 3. -inch stage and -inch 3 stage HPS can be used at temperatures up to 343"C (65"F). WCC, LCC, WC9 - to 47 - to 8 S36/CoCr-A seat ring WCC, LCC, WC9 - to to 5 S36/CoCr-A seat ring WCC, LCC, WC9-46 to to 65 3

14 Table 9. Construction Materials and Temperature Capabilities for Parts Other than Body and Trim PART MATERIAL TEMPERATURE CAPABILITIES Degrees Celsius Degrees Fahrenheit Valve plug stem S9 (Nitronic 5 grade XM SST) --8 to to --54 to 47 (to to 8 (to 9 Graphite (FMS 7F7) Design HPD/HPAD for nonoxidizing service) for nonoxidizing service) piston ring --54 to 537 (to to (to Graphite (FMS 7F39) for nonoxidizing service) for nonoxidizing service) S46 (46 SST) -- to to 8 Backup ring S36 (36 SST) --8 to to Spring-loaded S3 (3 SST) Design HPT or Retaining ring --54 to to N775 (Inconel X75) (NACE) HPAT valve plug seal Seal ring PTFE with Hastelloy C Spring --73 to 3 (7) -- to 45 (7) Anti-extrusion PEEK (PolyEtherEtherKetone) --- rings (8) --- (8) N66 (Inconel 6)/Graphite --4 to to 8 Cage gasket N775 (Inconel X75)/Graphite () -- to 593 (3) -- to (3) TSO protected soft seat seal Carbon-filled PTFE --73 to 3 -- to 45 N66/Graphite --4 to to 8 Seat ring gasket N775/Graphite () -- to 593 (3) -- to (3) Studs Nuts Studs Nuts Studs Nuts Body-tobonnet bolting () Studs Nuts Studs Nuts Packing Studs Nuts Studs Nuts Studs Nuts Steel SA3-B7 (all body materials) Steel SA4-H (all body materials) Steel SA3-B7M for sour gas Steel SA4-HM for sour gas Steel SA3-B7 (WC9 & C5 body mat ls) Steel SA4-7 (WC9 & C5 body mat ls) Steel SA3-B6 (WC9 & C5 body mat ls) Steel SA4-7 (WC9 & C5 body mat ls) N778 SST (SB637) (5) (WC9 & C5 body mat ls) Steel SA4-7 (WC9 & C5 body mat ls) -- to 47 (WCC, C5, & WC9) --46 to 37 (LCC) --46 to 47 (36 CF8M) (4) -- to 47 (WCC) --46 to 37 (LCC) -- to 8 (WCC, C5, & WC9) --5 to 7 (LCC) --5 to 8 (36 CF8M) (4) -- to 8 (WCC) --5 to 7 (LCC) -- to to to to -- to to 5 S36 stainless steel SA3-B8M (strain hardened) (CF8M body mat ls) (6) S36 stainless steel SA4-8M (CF8M body mat ls) (6) --8 to to 8 S6686 SST (SA453-66) (CF8M body mat ls) Steel SA4-7-ENC (CF8M body mat ls) -- to to S9 SST (SA479-XM-) (5) (CF8M body mat ls) Steel SA4-7 (CF8M body mat ls) --8 to to PTFE V-ring --4 to to 45 Graphite ribbon filament (oxidizing service to 7"F) --54 to to Graphite ribbon (high-temperature oxidizing service) 37 to to Packing follower, spring, or lantern ring S36 stainless steel --54 to to Packing box ring S36 stainless steel --54 to to Packing flange, Steel -- to to 8 studs, or nuts S36 stainless steel --8 to to. Valve body materials with which these bolting materials may be used are shown in parentheses.. N775/graphite is standard in 4- and 6-inch HP valves. 3. For oxidizing services, limit to 47"C (8"F). 4. Steel studs and nuts with ENC (electroless nickel coating) are used with 4- and 6-inch CF8M valve bodies. 5. These stud materials are not listed in ASME B For valve sizes up through 3-inch. 7. If used with PEEK anti-extrusion rings, PTFE/carbon seal ring may be used in temperatures up to 36"C (6"F) for non-oxidizing service or up to 6"C (5"F) for oxidizing service. 8. These materials not limiting factors. 4

15 Table. Additional Globe Valve Specifications VALVE VALVE BODY PORT VALVE PLUG VALVE STEM DIAMETER SIZE, DESIGN AND DIAMETER TRAVEL CHARACTERISTIC INCHES PLUG STYLE mm Inches mm Inches mm Inches Equal percentage Modified equal percentage Cavitrol III, -stage) Equal percentage Std) Whisper Trim III, level A) Modified equal percentage HPS w/micro-flute HPS w/micro-form HPS w/micro-form /4 3/8 /4 3/8 -/8 -/8 -/8,.,.,.,.,,,, HPS. 7/8 38 -,., HPS w/micro-form /4 -/4 - -/8,.,.,,.,,.,,,,,,,, HPS, HPD, HPT /8 -/8,., (),, () HPS, HPD, HPT /8 38 -,., (),, () HPS w/micro-form /4-38 -/8 -/8 -/8 -/8 -,.,.,,.,,.,,,,,,,, HPS, HPD, HPT /8 38 -,., (),, () Cavitrol III, -stage) HPT ,.,, Cavitrol III, 3-stage) HPS 5. Equal percentage HPS, HPD, HPT 73-7/8 38 -,.,,, Modified equal percentage Std) HPS, HPD, HPT 73-7/8 5,.,,, 3 Whisper Trim III, level A, B) Cavitrol III, -stage) HPT ,.,,, Cavitrol III, 3-stage) HPT /8 64 -,.,,, Equal percentage HPD, HPT / ,, Modified equal percentage (Std) HPD, HPT /8 5.,, Whisper Trim III level 4 A, A3, B3, C3) Whisper Trim III level HPD, HPT 73-7/8 5.,, D3) Cavitrol III, -stage) HPT / ,, Cavitrol III, 3-stage) HPT 73-7/ ,, --continued-- 5

16 Table. Additional Globe Valve Specifications (Continued) VALVE VALVE BODY PORT VALVE PLUG VALVE STEM DIAMETER SIZE, DESIGN AND DIAMETER TRAVEL CHARACTERISTIC INCHES PLUG STYLE mm Inches mm Inches mm Inches Equal percentage HPD, HPT / ,, 3.8,, -/4 Modified equal percentage Std) HPD, HPT / ,, 3.8,, -/4 Whisper Trim III, level HPD, HPT /8 76 3, 3.8, -/4 6 A, B3, C3) Whisper Trim III, HPD, HPT. 4-3/8 76 3, 3.8, -/4 level D3) Cavitrol III, -stage) HPD, HPT /4 4.,, 3.8,, -/4 Cavitrol III, 3-stage) HPD, HPT /6 4., 5.4, 3.8,, -/4. Available only with Design HPS valve. Table. Valve Stem Travels for Class 5 Globe Valves VALVE SIZE, VALVE DESIGN / PLUG STYLE INCHES HPS / Micro-Form or Micro-Flute HPS / Micro-Form CHARACTERISTIC Equal Percentage Modified Equal Percentage Equal Percentage Modified Equal Percentage PORT DIAMETER MAXIMUM VALVE STEM TRAVEL mm Inches mm Inches 6.4, 9.5,,., 6.4, 9.5,,., 9.5,.,, ,.,, 3.8 /4, 3/8,,, /4, 3/8,,,.,,, -/4.,,, -/ /8 HPS / Micro-Form Equal Percentage /8 Modified Equal Percentage Linear HPS Equal Percentage /8 Modified Equal Percentage / /8 Linear HPD, HPT Equal Percentage /8 Modified Equal Percentage / /8 6

17 Table. Additional Angle Valve Specifications VALVE VALVE BODY SIZE, DESIGN AND CHARACTERISTIC INCHES PLUG STYLE HPAS w/micro-flute Up () Equal percentage HPAS w/micro-form Up Modified equal percentage Linear (cage style: Std) Cavitrol III, -stage) Equal percentage HPAS, equal percentage characterized cage HPAS w/micro-form Bulletin 5.:HP PORT VALVE PLUG VALVE STEM DIAMETER DIAMETER TRAVEL DIRECTION mm Inches mm Inches mm Inches /4 3/ /4,.,. Down.. Up. -/8 -/8 -/8,.,. HPAS Down. -/8. HPAS w/ Micro-Flat Down /8.,,,, HPAS Down. 7/8 38 -,., HPAS w/micro-flute Up () HPAS w/micro-form Up HPAS, equal percentage characterized cage Down /4 3/8 /4 -/4 - -/4 - -/8 -/8,.,.,,.,,.,..,,,,,,, HPAS Up /8 -/8,.,,, HPAD, HPAT Down /8 -/8,., --continued-- 7

18 Table. Additional Angle Valve Specifications (Continued) VALVE VALVE BODY SIZE, DESIGN AND CHARACTERISTIC INCHES PLUG STYLE Modified equal percentage HPAS w/micro-form HPAS, equal percentage characterized cage PORT VALVE PLUG VALVE STEM DIAMETER DIAMETER TRAVEL DIRECTION mm Inches mm Inches mm Inches Up Down /4 - -/ /8 -/8 -/8 -/8 - -/8 -/8 -/8 -,.,.,,.,,.,..,,,,,,, HPAS Up /8 38 -,.,,, HPAD, HPAT Down /8 38 -,., Linear (cage style: std) HPAS w/micro-flat Down -/8. Linear (cage HPAS Up /8 38 -,.,,, style: std) HPAD, HPAT Down /8 38 -,., Whisper III, level A) HPAS, HPAD, HPAT Up /8 38 -,., (),, () Cavitrol III, -stage) HPAT Down ,., Cavitrol III, 3-stage) HPAS Down 5.. Available only with Design HPAS valves.. Micro-Flutes ( flute and port flute) may be used flow down in flashing and erosive service. Table 3. Globe and Angle Valve Yoke Boss and Valve Stem Diameter Combinations () VALVE STANDARD DIAMETERS OPTIONAL DIAMETERS SIZE, mm Inches mm Inches INCHES Stem Yoke Boss Stem Yoke Boss Stem Yoke Boss Stem Yoke Boss 7-3/ / /6 3-9/ / / /4. See tables 8 and 9 for valve stem diameters available for specific construction / /6 8

19 FLUID TEMPERATURE, "C 6 FLUID TEMPERATURE, "C 6 PRESSURE DROP, PSI CLASS 5 CLASS FLUID TEMPERATURE, "F WCC AND LCC STEEL VALVE PRESSURE DROP, BAR, DIFFERENTIAL PRESSURE DROP, PSI CLASS 5 CLASS 5 CLASS FLUID TEMPERATURE, "F A5 STEEL VALVE 3 PRESSURE DROP, BAR, DIFFERENTIAL FLUID TEMPERATURE, "C 8 6 FLUID TEMPERATURE, "C 6 PRESSURE DROP, PSI CLASS 9 CLASS FLUID TEMPERATURE, "F CF8M STAINLESS STEEL VALVE PRESSURE DROP, BAR, DIFFERENTIAL PRESSURE DROP, PSI FLUID TEMPERATURE, "C CLASS 5 CLASS FLUID TEMPERATURE, "F C5 Cr--Mo STEEL VALVE PRESSURE DROP, BAR 6 PRESSURE DROP, PSI 5 3 CLASS 5 CLASS 5 3 PRESSURE DROP, BAR NOTE: LCC HAS AN UPPER TEMPERATURE LIMIT OF 37"C (7"F) DO NOT EXCEED THE MAXIMUM PRESSURE AND TEMPERATURE FOR THE CLASS RATING OF THE VALVE MATERIAL AND SIZE USED. REFER TO FIGURE FOR PRESSURE/TEMPERATURE LIMITS OF THE TRIM USED. CLASS FLUID TEMPERATURE, "F WC9 AND F Cr--Mo STEEL VALVE C / IL Figure 3. Pressure-Temperature Limits for Class 9, 5, and 5 Valves

20 Flowing Pressure Drops Limits for 6-Inch HPD and HPT Valves (Without Cavitrol III or Whisper III Trim) MAXIMUM ING STEM PRESSURE DROP DIAMETER, MEDIA Bar PSI mm (INCHES) Flow Down Flow Up Flow Down Flow Up All except boiler feedwate r Boiler feedwate r mm (-inch) mm (-inch) 3.8 mm (-/4 inch) 5.8 x 3.8 mm () ( x -/4 inch) 3.8 mm (-/4 inch) 5.8 x 3.8 mm () ( x -/4 inch) Requires 3.8 mm (-/4 inch) Nitronic 5 stem with 5.8 mm (-inch) plug-to-stem connection FLUID TEMPERATURE, "C 6 FLUID TEMPERATURE, "C 6 PRESSURE DROP, PSI 6 5 3, FLUID TEMPERATURE, "F PRESSURE DROP, BAR, DIFFERENTIAL PRESSURE DROP, PSI 6 5 3,8 H, 8H FLUID TEMPERATURE, "F 3 PRESSURE DROP, BAR, DIFFERENTIAL 3 4 FLUID TEMPERATURE, 4 "C 6 FLUID TEMPERATURE, "C 6 73 FLUID TEMPERATURE, "C 6 PRESSURE DROP, PSI , FLUID TEMPERATURE, "F SOUR GAS APPLICATIONS (NACE) 3 PRESSURE DROP, BAR, DIFFERENTIAL NOTES: USE TRIM B OR 7B IN 3, 4, 6 HP ABOVE 343"C (65"F). NATIONAL ASSOCIATION OF CORROSION ENGINEERS (MR75). 3 BE ESPECIALLY CAREFUL TO SPECIFY SERVICE TEMPERATURE IF TRIM OR 8 IS SELECTED, AS DIFFERENT THERMAL EXPANSION RATES REQUIRE SPECIAL PLUG CLEARANCES. PRESSURE DROP, PSI LIMIT FOR 3--STAGE LIMIT FOR --STAGE 6 8 FLUID TEMPERATURE, "F 3 PRESSURE DROP, BAR, DIFFERENTIAL PRESSURE DROP, PSI FLUID TEMPERATURE, "F PRESSURE DROP, BAR, DIFFERENTIAL C / IL Figure 4. Pressure-Temperature Limits for Trim Material Combinations

21 A () VALVE ANSI DIN SIZE, Class 9 Class 5 INCHES RF RTJ BWE SWE RF RTJ PN6 PN5 mm Class Class 9 Class 5 Inches Class B () VALVE ANSI DIN SIZE, Class 9 Class 5 INCHES RF RTJ BWE SWE RF RTJ PN6 PN5 mm () (3) Class Class 9 Class 5 Inches () (3) Class RF-raised-face flanges; RTJ-ring-type joint flanges; BWE-buttwelding ends; SWE-socketweld ends.. Manufactured in U.S.A. 3. Manufactured in Europe and Japan. Figure 5. Globe Valve Dimensions with Standard Bonnet STANDARD BONNETS VALVE D SIZE, G Yoke Boss Diameters, mm (Inches) INCHES 7 (-3/6) 9 (3-9/6) 7 (5) mm Class 9 and Std, Whisper III, Cavitrol III 3-Stage Cavitrol III -Stage () (3) Class Std, Whisper III, Cavitrol III 3-Stage Cavitrol III -Stage Inches Class 9 and Std, Whisper III, Cavitrol III 3-Stage Cavitrol III -Stage () (3) Class Std, Whisper III, Cavitrol III 3-Stage Cavitrol III -Stage EXTENSION BONNETS (CLASS 9 AND 5) VALVE D SIZE, G Yoke Boss Diameters, mm (Inches) INCHES 7 (-3/6) 9 (3-9/6) 7 (5) mm Std, Whisper III, Cavitrol III 3-Stage Inches Std, Whisper III, Cavitrol III 3-Stage Cavitrol III -Stage Cavitrol III -Stage

22 MATCH LINE FOR ACTUATOR MATCH LINE FOR ACTUATOR MATCH LINE FOR 49 SERIES ACTUATORS AND TYPE 657, 667 SIZE ACTUATORS MATCH LINE FOR ALL OTHER ACTUATORS (.) mm (INCHES) FLANGED VALVE WITH 7 OR 9 mm (--3/6 OR 3--9/6 INCH) DIAMETER YOKE BOSS A57--3 / IL BUTTWELDING END VALVE WITH 7 OR 9 mm (--3/6 OR 3--9/6 INCH) DIAMETER YOKE BOSS TYPICAL SIZE,, AND 3 7mm (5--INCH) DIAMETER YOKE BOSS FOR USE WITH ALL VALVES MATCH LINE FOR ACTUATOR MATCH LINE FOR ACTUATOR MATCH LINE FOR 49 SERIES ACTUATORS AND TYPE 657, 667 SIZE ACTUATORS MATCH LINE FOR ALL OTHER ACTUATORS (.) FLANGED VALVE WITH 7 OR 9 mm (--3/6 OR 3--9/6 INCH) DIAMETER YOKE BOSS NOTE: FOR DIMENSIONS OF VALVES WITH OTHER END CONNECTIONS, CONSULT YOUR FISHER CONTROLS SALES OFFICE OR SALES REPRESENTATIVE. A7--4 / IL BUTTWELDING END VALVE WITH 7 OR 9 mm (--3/6 OR 3--9/6 INCH) DIAMETER YOKE BOSS TYPICAL SIZE 3 (EUROPE AND JAPAN MANUFACTURE), 4, AND 6 7mm (5--INCH) DIAMETER YOKE BOSS FOR USE WITH FLANGED OR BUTTWELDING VALVE mm (INCHES) Figure 5. Globe Valve Dimensions with Standard Bonnet (Continued)

23 D VALVE SIZE, Yoke Boss Diameters, mm (Inches) INCHES 7 (-3/6) 9 (3-9/6) 7 (5) mm (std trim) (std, Whisper III, Cavitrol III, 3-stage trim) (Cavitrol III -stage trim) Inches (std trim) (std, Whisper III, Cavitrol III 3-stage trim) (Cavitrol III -stage trim) MATCH LINE FOR ACTUATOR MATCH LINE FOR 49 SERIES ACTUATORS MATCH LINE FOR ALL OTHER ACTUATORS (.) 7 mm (5--INCH) DIAMETER YOKE BOSS FOR STYLE EXTENSION BONNET FLANGED VALVE WITH STYLE EXTENSION BONNET HAVING 7 OR 9 mm (--3/6 OR 3--9/6 INCH) DIAMETER YOKE BOSS A57-- / IL mm (INCHES) Figure 6. Dimensions D for Style Extension Bonnet (A, B, and G Dimensions Listed in Figure 5 Do Not Change When Extension Bonnet is Used) 3

24 STANDARD BONNETS D VALVE Yoke Boss Diameters, mm (Inches) SIZE, 7 (-3/6) 9 (3-9/6) 7 (5) INCHES Class 9 & 5 Class 5 Class 9 & 5 Class 5 Class 9 & 5 Class 5 mm Std, Whisper III, Cavitrol III 3-Stage Cavitrol III -Stage Inches Std, Whisper III, Cavitrol III 3-Stage Cavitrol III -Stage EXTENSION BONNETS D VALVE Yoke Boss Diameters, mm (Inches) SIZE, 7 (-3/6) 9 (3-9/6) 7 (5) INCHES Class 9 & 5 Class 5 Class 9 & 5 Class 5 Class 9 & 5 Class 5 mm Std, Whisper III, Cavitrol III 3-Stage Cavitrol III -Stage Inches Std, Whisper III, Cavitrol III 3-Stage Cavitrol III -Stage G A () VALVE ANSI DIN SIZE, Class 5 Class 9 & 5 INCHES PN6 PN5 SWE SWE BWE SWE RF RTJ mm Inches RF raised-face flanges; RTJ ring-type-joint flanges; BWE buttwelding ends; SWE socket-weld ends. Figure 7. Angle Valve Dimensions with Standard Bonnet 4

25 MATCH LINE FOR ACTUATOR MATCH LINE FOR ACTUATOR FLANGED VALVE WITH 7 OR 9 mm (--3/6 OR 3--9/6 INCH) DIAMETER YOKE BOSS FOR CLASS 9 AND 5 VALVES, G = A. FOR CLASS 5 VALVES, SEE THE TABLE ON PAGE 4 FOR THE G DIMENSION.) NOTE: FOR DIMENSIONS OF VALVES WITH OTHER END CONNECTIONS, CONSULT YOUR FISHER CONTROLS SALES OFFICE OR SALES REPRESENTATIVE. FLANGED VALVE WITH STYLE EXTENSION BONNET HAVING 7 OR 9 mm (--3/6 OR 3--9/6 INCH) DIAMETER YOKE BOSS A68-- / IL Figure 7. Angle Valve Dimensions with Standard Bonnet (Continued) 5

26 Cavitrol, Whisper Trim, FIELDVUE, Micro-Form, Micro-Flat, Micro-Flute, ENVIRO-SEAL, HIGH-SEAL, Fisher, Fisher-Rosemount, and Managing The Process Better are marks owned by Fisher Controls International, Inc. or Fisher-Rosemount Systems, Inc. C-seal is a mark owned by Pressure Science, Inc. All other marks are the property of their respective owners. This product may be covered by one or more of the following patents: 5,,65; 5,3,666; 5,56,757; 5,3,498; and 5,9,8 or under pending patents. &Fisher Controls International, Inc. 9, 99; All Rights Reserved The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. We reserve the right to modify or improve the designs or specifications of such products at any time without notice. For information, contact Fisher Controls: Marshalltown, Iowa 558 USA Cernay 687 France Sao Paulo 544 Brazil Singapore Printed in U.S.A.

Fisher HP Series Control Valves

Fisher HP Series Control Valves Product Bulletin D0635X0 Fisher HP Series Control s HP (Globe ) HPA (Angle ) Balanced High-Temperature Trim Balanced Tight Shutoff Trim Unbalanced Trim Fisher HP Series control valves (figure ) are single-port,

More information

Fisher HP Series Control Valves

Fisher HP Series Control Valves HP Valve Product Bulletin Fisher HP Series Control Valves HP (Globe Valve) HPA (Angle Valve) Balanced High-Temperature Trim Balanced Tight Shutoff Trim Unbalanced Trim Fisher HP Series control valves are

More information

Fisher HP Series Control Valves

Fisher HP Series Control Valves HP Valve Product Bulletin Fisher HP Series Control Valves HP (Globe Valve) HPA (Angle Valve) Balanced High-Temperature Trim Balanced Tight Shutoff Trim Unbalanced Trim Fisher HP Series control valves are

More information

Fisher HP Series Control Valves

Fisher HP Series Control Valves HP Valve Product Bulletin Fisher HP Series Control Valves HP (Globe Valve) HPA (Angle Valve) Balanced High-Temperature Trim Balanced Tight Shutoff Trim Unbalanced Trim Fisher HP Series control valves are

More information

Fisherr HP Series Control Valves

Fisherr HP Series Control Valves Fisherr HP Series Control Valves HP (Globe Valve) HPA (Angle Valve) Balanced High-Temperature Trim Balanced Tight Shutoff Trim Unbalanced Trim Fisher HP Series control valves are single-port, high-pressure,

More information

Fisher EH and EHA Control Valves

Fisher EH and EHA Control Valves EH and EHA Valves D100042012 Product Bulletin Fisher EH and EHA Control Valves EH (globe) EHS (NPS 1-1/2x1 through 8x6), EHD (NPS 2 through 20), and EHT (NPS 2 through 16x12) EHA (angle) EHAS (NPS 3 through

More information

Fisher YD and YS Control Valves

Fisher YD and YS Control Valves Product Bulletin D100031X012 Fisher YD and YS Control Valves Fisher YD (figure 1) and YS three-way cage-guided valves are designed for throttling or flow-switching (on-off) service, and are available in

More information

Fisher CAV4 Control Valve

Fisher CAV4 Control Valve CAV Valve Product Bulletin Fisher CAV Control Valve The Fisher CAV control valve with Cavitrol IV trim is designed specifically for liquid applications, such as boiler feedwater recirculation, where pressure

More information

Fisher CAV4 Control Valve

Fisher CAV4 Control Valve Product Bulletin D10197X012 Fisher CAV Control Valve CAV Valve The Fisher CAV control valve (figure 1) with Cavitrol IV trim is designed specifically for liquid applications, such as boiler feedwater recirculation,

More information

Fisher EU and EW Valves NPS 12 through 24 x 20

Fisher EU and EW Valves NPS 12 through 24 x 20 Product Bulletin D102004X012 Fisher EU and EW Valves NPS 12 through 24 x 20 EU Valve The Fisher NPS 12 through 24 20 CL150 through CL600 EUT-2, EWT-2, EUD, EWD, EUT, and EWT general-purpose valves (figures

More information

Design ET, EAT, and ETR Sliding-Stem Control Valves

Design ET, EAT, and ETR Sliding-Stem Control Valves Product Bulletin Design ET, EAT, and ETR Sliding-Stem Control Valves ET Valve Design ET, EAT, and ETR general-purpose control valves (figures 1,,, and ) are used for throttling or on-off control of a wide

More information

Fisher EW Series (EWD/EWS/EWT) Sliding-Stem Control Valves through NPS 12x8

Fisher EW Series (EWD/EWS/EWT) Sliding-Stem Control Valves through NPS 12x8 Product Bulletin D100023X012 Fisher EW Series (EWD/EWS/EWT) Sliding-Stem Control Valves through NPS 128 EW Valve Fisher EW Series easy-e valves (figures 1, 2, 3, 4, and 5) feature large internal cavities

More information

Fisher YD and YS Control Valves

Fisher YD and YS Control Valves YD and YS Valves Product Bulletin Fisher YD and YS Control Valves Fisher YD and YS three-way cage-guided valves are designed for throttling or flow-switching (on-off) service, and are available in the

More information

Fisher DFA Variable Geometry Desuperheater

Fisher DFA Variable Geometry Desuperheater DFA Desuperheater Product Bulletin Fisher DFA Variable Geometry Desuperheater The Fisher DFA (Desuperheater with Flexible Architecture) can be used in many applications to efficiently control the spraywater

More information

Fisher CAV4 Control Valve

Fisher CAV4 Control Valve Fisher CAV4 Control Valve CAV4 (globe) CAV4 (NPS 2) CAV4 (angle) CAV4 (NPS 2 through 6) CAV4 Series Valves The Fisher CAV4 control valve with Cavitrol IV trim is designed specifically for liquid applications,

More information

Fisher FB Control Valve

Fisher FB Control Valve Fisher FB Control Valve Fisher FB fabricated angle valves are used with compressible fluids on special applications requiring maximum noise attenuation capability and high capacity. Typical applications

More information

Fisherr easy -et Cryogenic Sliding -Stem Control Valves

Fisherr easy -et Cryogenic Sliding -Stem Control Valves Product Bulletin D102189X012 easy--e Cryogenic Valves Fisherr easy -et Cryogenic Sliding -Stem Control Valves Fisher easy--e cryogenic valves are globe--style, single--port, valves featuring stainless

More information

Fisher Large ED/EWD and ET/EWT Valves NPS 12 through 30

Fisher Large ED/EWD and ET/EWT Valves NPS 12 through 30 Large ET and ED Valves Product Bulletin Fisher Large ED/EWD and ET/EWT Valves NPS 12 through 30 Fisher NPS 12 through 30 CL150 through ED/EWD and ET/EWT series control valves are used for either throttling

More information

Fisher Large ED/EWD and ET/EWT Valves NPS 12 through 30

Fisher Large ED/EWD and ET/EWT Valves NPS 12 through 30 Large ET and ED Valves Product Bulletin Fisher Large ED/EWD and ET/EWT Valves NPS 12 through 30 Fisher NPS 12 through 30 CL150 through ED/EWD and ET/EWT series control valves are used for either throttling

More information

EW Series (Designs EWD/EWS/EWT) Sliding-Stem Control Valves through 10 x 8- and 12 x 8-Inch Sizes

EW Series (Designs EWD/EWS/EWT) Sliding-Stem Control Valves through 10 x 8- and 12 x 8-Inch Sizes Product Bulletin EW Valve EW Series (Designs EWD/EWS/EWT) Sliding-Stem Control Valves through 10 8- and 12 8-Inch Sizes The EW Series easy-e valves (figures 1, 2, 3, 4, and 5) feature large internal cavities

More information

Fisher ES and EAS Sliding-Stem Control Valves

Fisher ES and EAS Sliding-Stem Control Valves Fisher ES and EAS Sliding-Stem Control Valves Fisher ES and EAS general-purpose control valves (figures and ) are used for throttling or on-off control of a wide variety of liquids and gases. Both valve

More information

Fisher ED, EAD, and EDR Sliding-Stem Control Valves

Fisher ED, EAD, and EDR Sliding-Stem Control Valves ED Valve D00070 Product Bulletin Fisher ED, EAD, and EDR Sliding-Stem Control Valves Fisher ED, EAD, and EDR single-port control valves shown in figures,, and have balanced valve plugs, cage guiding, and

More information

Vee-Ball Designs V150, V200 and V300 Rotary Control Valves

Vee-Ball Designs V150, V200 and V300 Rotary Control Valves January 000 Bulletin 5.3:Vee-Ball Vee-Ball Designs V50, V00 and V300 Rotary Control Valves This bulletin covers the - through -inch, 3- through -inch Series B, and the 4- through 0-inch Designs V50, V00

More information

Fisher ED, EAD, and EDR Sliding-Stem Control Valves

Fisher ED, EAD, and EDR Sliding-Stem Control Valves ED Valve D00070 Product Bulletin Fisher ED, EAD, and EDR Sliding-Stem Control Valves Fisher ED, EAD, and EDR single-port control valves shown in figures,, and have balanced valve plugs, cage guiding, and

More information

Fisher 461 Increased Outlet Angle Sweep-Flo Valve

Fisher 461 Increased Outlet Angle Sweep-Flo Valve 461 Valve Product Bulletin Fisher 461 Increased Outlet Angle Sweep-Flo Valve The Fisher 461 Sweep-Flo valve is a self-cleaning, increased outlet, angle valve that is typically used in the chemical and

More information

Design D4 Control Valve

Design D4 Control Valve Product Bulletin Design D4 Control Valve D4 Valve The Design D4 control valve is a compact, rugged globe valve designed primarily for high-pressure throttling applications. This valve is ideal for use

More information

Vee-Ball Design V150, V200 and V300 Rotary Control Valves

Vee-Ball Design V150, V200 and V300 Rotary Control Valves Product Bulletin Vee-Ball Design V150, V200 and V300 Rotary Control Valves Vee-Ball Valves This bulletin covers the 1- through 2-inch, 3- through 12-inch Series B, and the 14- through 20-inch Design V150,

More information

Model 361 Control Valves

Model 361 Control Valves FEATURES Sour Service Capability Available in standard configurations that comply with NACE MR0175-2002. Versatility A wide range of trim options including Low-Noise make the 361 one of our most versatile

More information

Fisher EW Series (EWD/EWS/EWT) Sliding-Stem Control Valves through NPS 12x8

Fisher EW Series (EWD/EWS/EWT) Sliding-Stem Control Valves through NPS 12x8 EW Valve Product Bulletin Fisher EW Series (EWD/EWS/EWT) Sliding-Stem Control Valves through NPS 128 Fisher EW Series easy-e valves (figures 1, 2, 3, and 4) feature large internal cavities with epanded

More information

Fisher CCV-N Fuel Gas Control Valve

Fisher CCV-N Fuel Gas Control Valve CCV-N Valve Product Bulletin Fisher CCV-N Fuel Gas Control Valve Fisher CCV-N fuel gas control valves are used in gas turbines which meter the fuel gas to the combustion chamber of the turbine and provide

More information

Fisher ET, EAT, and ETR Sliding-Stem Control Valves

Fisher ET, EAT, and ETR Sliding-Stem Control Valves ET Valve D Product Bulletin Fisher ET, EAT, and ETR Sliding-Stem Control Valves Fisher ET, EAT, and ETR general-purpose control valves (figures,, and ) are used for throttling or on-off control of a wide

More information

Model 380/381 Control Valves

Model 380/381 Control Valves Features High Quality Construction Dyna-Flo uses only materials that have been proven to provide superior, trouble free performance. All materials comply with ASME and ASTM specifications. Versatility

More information

Design D and DA Control Valves

Design D and DA Control Valves Product Bulletin Design D and DA Control Valves D and DA Valves Design D and DA single-port, high-pressure valves (figure ) are widely used in oil and gas production industries. These valves are especially

More information

Fisher CV500 Rotary Globe Control Valve

Fisher CV500 Rotary Globe Control Valve CV500 Valve D101606012 Product Bulletin Fisher CV500 Rotary Globe Control Valve The Fisher CV500 Cam Vee-Ball control valve combines the rangeability of the cammed-segmented V-notched ball, with the inherent

More information

Model 363 Control Valves

Model 363 Control Valves Features Versatility Multiple port sizes make the 363 an easy valve to reconfigure when process applications change. Rugged Design Available severe service trim and high temperature configurations are

More information

Design V250 Rotary Control Valve

Design V250 Rotary Control Valve Product Bulletin Design V250 Rotary Control Valve V250 Valve The Design V250 Hi-Ball rotary control valve (figure 1) is designed for heavy-duty throttling and on-off applications. Depending on size, this

More information

Fisher CV500 Rotary Control Valve

Fisher CV500 Rotary Control Valve Product Bulletin D101606012 Fisher CV500 Rotary Control Valve CV500 Valve The Fisher CV500 Cam Vee Ball control valve combines the rangeability of the cammed-segmented V-notched ball, with the inherent

More information

Design CP Control Valve with ENVIRO-SEAL Bellows Seal Bonnet

Design CP Control Valve with ENVIRO-SEAL Bellows Seal Bonnet Instruction Manual Form 5410 November 1998 Design CP/ENVIRO-SEAL Bellows Seal Design CP Control Valve with ENVIRO-SEAL Bellows Seal Bonnet Contents Introduction.............................. 1 Scope of

More information

Type D2 FloPro Control Valve

Type D2 FloPro Control Valve Product Bulletin Type D2 FloPro Control Valve D2 FloPro Valve The Type D2 FloPro control valve (figure 1) is a compact, rugged valve designed for on-off control. This valve is ideal for use as a dump valve

More information

Fisher V500 Rotary Control Valve

Fisher V500 Rotary Control Valve Product Bulletin D100054012 Fisher V500 Rotary Control Valve V500 Valve The Fisher V500 eccentric plug rotary control valve controls erosive, coking, and other hard-to-handle fluids, providing either throttling

More information

Fisher Vee-Ball V150, V200, and V300 Rotary Control Valves

Fisher Vee-Ball V150, V200, and V300 Rotary Control Valves Vee-Ball Valves Product Bulletin Fisher Vee-Ball V150, V200, and V300 Rotary Control Valves This bulletin covers the DN 25 through 600 (NPS 1 through 24) V150, V200 and V300 Vee-Ball control valves. The

More information

Fisher Vee-Ball V150, V200 and V300 Rotary Control Valves

Fisher Vee-Ball V150, V200 and V300 Rotary Control Valves Vee-Ball Valves Product Bulletin Fisher Vee-Ball V150, V200 and V300 Rotary Control Valves This bulletin covers the NPS 1 through 2, NPS 3 through 12 Series B, and the NPS 14 through 20 V150, V200 and

More information

Fisher Vee-Ball V150, V200, and V300 Rotary Control Valves

Fisher Vee-Ball V150, V200, and V300 Rotary Control Valves Vee-Ball Valves Product Bulletin Fisher Vee-Ball V150, V200, and V300 Rotary Control Valves This bulletin covers the DN 25 through 600 (NPS 1 through 24) V150, V200 and V300 Vee-Ball control valves. The

More information

Fisher D4 Control Valve Assembly

Fisher D4 Control Valve Assembly Product Bulletin D103039X012 Fisher D4 Control Valve Assembly D4 Valve The Fisher D4 control valve is a compact, rugged globe valve designed primarily for high-pressure throttling applications. This valve

More information

Fisher Vee-Ball V150, V200, and V300 Rotary Control Valves

Fisher Vee-Ball V150, V200, and V300 Rotary Control Valves Vee-Ball Valves Product Bulletin Fisher Vee-Ball V150, V200, and V300 Rotary Control Valves This bulletin covers the DN 25 through 600 (NPS 1 through 24) V150, V200 and V300 Vee-Ball control valves. The

More information

Features. Product Bulletin 51.6:8590 August Valve D104017X012

Features. Product Bulletin 51.6:8590 August Valve D104017X012 8590 Valve Product Bulletin Fisher 8590 High-Performance Butterfly Valve The Fisher 8590 High-Performance Butterfly Valve maintains tight shutoff, and can be specified for a wide range of pressure and

More information

Design V260 Ball Control Valve

Design V260 Ball Control Valve Product Bulletin D102352X012 V260 Valve Design V260 Ball Control Valve The Design V260 is a full bore control valve designed from the ground up with features for optimized pressure, flow and process control.

More information

Fisher 8532 High-Performance Butterfly Valve

Fisher 8532 High-Performance Butterfly Valve 8532 Valve Product Bulletin Fisher 8532 High-Performance Butterfly Valve The Fisher 8532 high-performance butterfly valve provides outstanding performance under extreme pressure and temperature conditions.

More information

Fisher CL600 Control-Disk Valve

Fisher CL600 Control-Disk Valve CL600 Control-Disk Valve Product Bulletin Fisher CL600 Control-Disk Valve The Fisher CL600 Control-Disk valve provides outstanding performance in a wide range of pressure and temperature conditions. The

More information

Fisher HP and HPA Control Valves

Fisher HP and HPA Control Valves Instruction Manual Fisher HP and HPA Control Valves Contents Introduction... 1 Scope of Manual... 1 Description... 2 Specifications... 3 Educational Services... 5 Installation... 6 Maintenance... 7 Packing

More information

Model 370/371 Control Valves

Model 370/371 Control Valves Features Sour Service Capability Available in standard configurations that comply with NACE MR0175/ISO 15156. Versatility A wide range of trim options including Low Noise and Anti- Cavitation make the

More information

Fisher 8532 High-Performance Butterfly Valve

Fisher 8532 High-Performance Butterfly Valve 8532 Valve Product Bulletin Fisher 8532 High-Performance Butterfly Valve The Fisher 8532 high-performance butterfly valve provides outstanding performance under extreme pressure and temperature conditions.

More information

Fisher V250 Rotary Control Valve

Fisher V250 Rotary Control Valve V250 Valve Product Bulletin Fisher V250 Rotary Control Valve The V250 Hi Ball rotary control valve is designed for heavy duty throttling and on off applications. Depending on size, this valve installs

More information

Type 8510 and 8510B Eccentric Disc Control Valves (EMA)

Type 8510 and 8510B Eccentric Disc Control Valves (EMA) Product Bulletin August 4 8510/8510B Valve Type 8510 and 8510B Eccentric Disc Control Valves (EMA) The Type 8510 and 8510B edisc valves feature an eccentrically mounted disc and a PTFE or 316 stainless

More information

Fisher A31D Double-Flange High-Performance Butterfly Valve

Fisher A31D Double-Flange High-Performance Butterfly Valve A31D Valve Product Bulletin Fisher A31D Double-Flange High-Performance Butterfly Valve The Fisher A31D double-flange high-performance butterfly valve provides outstanding performance under extreme pressure

More information

Fisher 8580 Rotary Valve

Fisher 8580 Rotary Valve 8580 Valve Product Bulletin Fisher 8580 Rotary Valve The Fisher 8580 rotary valve offers excellent throttling and automated on-off, quarter-turn performance. An approximately linear flow characteristic

More information

Fisher HP and HPA Control Valves

Fisher HP and HPA Control Valves Instruction Manual HP and HPA Valves Fisher HP and HPA Control Valves Contents Introduction... 1 Scope of Manual... 1 Description... 2 Specifications... 3 Educational Services... 3 Installation... 3 Maintenance...

More information

Fisher 8580 Rotary Valve

Fisher 8580 Rotary Valve 8580 Valve Product Bulletin Fisher 8580 Rotary Valve The Fisher 8580 rotary valve offers excellent throttling and automated on-off, quarter-turn performance. An approximately linear flow characteristic

More information

Type 8560 Eccentric Disk Butterfly Control Valve

Type 8560 Eccentric Disk Butterfly Control Valve Product Bulletin 8560 Valve Type 8560 Eccentric Disk Butterfly Control Valve The Type 8560 high-performance valve (figures 1 and 2) features a stainless steel disk with a soft or stainless steel seal ring.

More information

Fisher A31D Double-Flange High-Performance Butterfly Valve

Fisher A31D Double-Flange High-Performance Butterfly Valve A31D Valve Product Bulletin Fisher A31D Double-Flange High-Performance Butterfly Valve The Fisher A31D double-flange high-performance butterfly valve provides outstanding performance under extreme pressure

More information

Baumann 24000CVF Carbon & 24000SVF Stainless Steel Flanged Control Valves

Baumann 24000CVF Carbon & 24000SVF Stainless Steel Flanged Control Valves 24000CVF and 24000SVF Valves Product Bulletin Baumann 24000CVF Carbon & 24000SVF Stainless Steel Flanged Control Valves The Baumann 24000CVF and 24000SVF line of control valves can be utilized for the

More information

Fisher 8590 High-Performance Butterfly Valve

Fisher 8590 High-Performance Butterfly Valve 8590 Valve Product Bulletin Fisher 8590 High-Performance Butterfly Valve The Fisher 8590 High-Performance Butterfly Valve maintains tight shutoff, and can be specified for a wide range of pressure and

More information

Fisher V500 Rotary Globe Control Valve

Fisher V500 Rotary Globe Control Valve V500 Valve D100054012 Product Bulletin Fisher V500 Rotary Globe Control Valve The Fisher V500 eccentric plug rotary control valve controls erosive, coking, and other hard-to-handle fluids, providing either

More information

Fisher V260 Ball Control Valve

Fisher V260 Ball Control Valve Fisher V260 Ball Control Valve The Fisher V260 is a full-bore control valve designed from the ground up with features for optimized pressure, flow and process control. An integral drilled attenuator controls

More information

Fisher Control-Disk Rotary Valve

Fisher Control-Disk Rotary Valve Product Bulletin Fisher Control-Disk Rotary Valve The Fisher Control-Disk rotary valve offers excellent throttling performance. An equal percentage flow characteristic provides an improved throttling range

More information

Fisher 8510 and 8510B Eccentric Disc Control Valves (EMA)

Fisher 8510 and 8510B Eccentric Disc Control Valves (EMA) Product Bulletin D100066X012 February 7 Fisher 8510 and 8510B Eccentric Disc Control Valves (EMA) 8510/8510B Valve Fisher 8510 and 8510B eccentric disc valves feature an eccentrically mounted disc and

More information

Fisher easy-e Control Valve NPS 12 through 24x20

Fisher easy-e Control Valve NPS 12 through 24x20 Management of Change Guide Fisher easy-e Control Valve NPS 12 through 24x20 Table of Contents Management of Change...2 Background...2 Question & Answer Checklist...2 Comparison of EU/EW to easy-e Valves...6

More information

Fisher Z500 Severe Service Ball Valves

Fisher Z500 Severe Service Ball Valves Z500 Ball Valves D099X0 Product Bulletin 5.:Z500 April 06 Fisher Z500 Severe Service Ball Valves This bulletin covers Fisher NPS / 6 Z500 Severe Service Ball Valves. The Z500 severe service ball valve

More information

Fisherr HP and HPA Control Valves

Fisherr HP and HPA Control Valves Instruction Manual D0634X0 HP and HPA Valves July 0 Fisherr HP and HPA Control Valves Contents Introduction... Scope of Manual... Description... Specifications... Installation... 3 Maintenance... 6 Packing

More information

Fisher SS-138B Continuous Catalytic Regeneration Valve

Fisher SS-138B Continuous Catalytic Regeneration Valve SS-18B Valve Product Bulletin Fisher SS-18B Continuous Catalytic Regeneration Valve This bulletin covers the Fisher SS-18B, an NPS 1 through NPS 8 segmented ball valve with metal flow ring construction.

More information

Model 2000 Control Valves Technical Sales Bulletin

Model 2000 Control Valves Technical Sales Bulletin Features Configuration Globe valve with screwed-on bonnet, unbalanced, post-guided valve plug, screwed-in metal seat ring construction, and push-down-to close valve plug action. Low Temperature Construction

More information

Fisher Sliding-Stem Valve Selection Guide

Fisher Sliding-Stem Valve Selection Guide Sliding-Stem Valve Selection Guide Product Bulletin Fisher Sliding-Stem Valve Selection Guide W8861 W7957-2 X0165 GX easy-e Typical Fisher Sliding-Stem Control Valves TBX STEAM CONDITIONING VALVE A broad

More information

Fisher SS-252B Continuous Catalytic Regeneration Valve

Fisher SS-252B Continuous Catalytic Regeneration Valve SS-252B Valve Product Bulletin Fisher SS-252B Continuous Catalytic Regeneration Valve This bulletin covers the Fisher SS-252B, an NPS 1 through NPS 8 segmented ball valve with an R000 metal seal. The segmented

More information

Baumann 24000S Stainless Steel Control Valve

Baumann 24000S Stainless Steel Control Valve 24000S Valve Product Bulletin Baumann 24000S Stainless Steel Control Valve The Baumann 24000S versatile, pneumatic, control valve may be used for the control of pressure, temperature, level, and flow.

More information

Fisher GX Control Valve and Actuator System

Fisher GX Control Valve and Actuator System Product Bulletin D103171X012 GX Control Valve and Actuator Fisher GX Control Valve and Actuator System The Fisher GX is a compact, state-of-the-art control valve and actuator system, designed to control

More information

Fisher eplug complete Rotary Control Valve and Actuator Package

Fisher eplug complete Rotary Control Valve and Actuator Package Product Bulletin D103196X012 eplug complete Fisher eplug complete Rotary Control Valve and Actuator Package...your complete control valve solution... simple...easy to select and install reliable...engineered

More information

Fisher D and DA Control Valves

Fisher D and DA Control Valves D and D Valves Product Bulletin Fisher D and D Control Valves Fisher D and D single port, high pressure valves are widely used in oil and gas production industries. These valves are especially useful for

More information

Fisher TBX Steam Conditioning Valve

Fisher TBX Steam Conditioning Valve TBX Valve Product Bulletin Fisher TBX Steam Conditioning Valve The Fisher TBX Steam Conditioning Valve is designed to handle the most severe applications in today's cycling power plants as well as provide

More information

Fisher A31A Cryogenic High Performance Butterfly Valve

Fisher A31A Cryogenic High Performance Butterfly Valve A31A Cryogenic Valve Product Bulletin Fisher A31A Cryogenic High Performance Butterfly Valve The Fisher A31A Cryogenic High Performance Butterfly Valve (HPBV) is designed for extreme temperature cryogenic

More information

Fisher GX Control Valve and Actuator System

Fisher GX Control Valve and Actuator System GX Control Valve and Actuator Product Bulletin Fisher GX Control Valve and Actuator System The Fisher GX is a compact, state-of-the-art control valve and actuator system, designed to control a wide range

More information

DBOY Series Pneumatic Control Valve

DBOY Series Pneumatic Control Valve Applications Process control systems for food, pulp and paper, chemical, petrochemical & other industries HVAC systems Feed water and fuel system controls in boiler rooms Packaged systems (OEM) such as

More information

Fisher Control-Disk Valve NPS 14-24

Fisher Control-Disk Valve NPS 14-24 Control-Disk NPS 14-24 Valve Product ulletin Fisher Control-Disk Valve NPS 14-24 The Fisher Control-Disk valve provides outstanding performance under extreme pressure and temperature conditions. The Control-Disk

More information

Design EUD, EUT-2, EWD, and EWT-2 Valves

Design EUD, EUT-2, EWD, and EWT-2 Valves Instruction Manual EUD, EUT-2, EWD, and EWT-2 Valves Design EUD, EUT-2, EWD, and EWT-2 Valves Contents Introduction............................... 1 Scope of Manual.......................... 1 Description...............................

More information

Design GX Control Valve and Actuator System

Design GX Control Valve and Actuator System Product Bulletin Design GX Control Valve and Actuator System The Fisher Design GX is a compact, state-of-the-art control valve and actuator system, designed to control a wide range of process liquids,

More information

Fisher POSI-SEAL A31A Cryogenic High Performance Butterfly Valve

Fisher POSI-SEAL A31A Cryogenic High Performance Butterfly Valve Product Bulletin D500230X012 A31A Cryogenic Valve Fisher POSI-SEAL A31A Cryogenic High Performance Butterfly Valve Description The Fisher A31A Cryogenic High Performance Butterfly Valve (HPBV) is designed

More information

Fisherr ET, EAT, and ETR Sliding-Stem Control Valves

Fisherr ET, EAT, and ETR Sliding-Stem Control Valves ET Valve D Product Bulletin Fisherr ET, EAT, and ETR Sliding-Stem Control Valves Fisher ET, EAT, and ETR general-purpose control valves (figures,, and ) are used for throttling or on-off controlofawidevarietyofliquidsandgases.allthree

More information

LV690 Series Rotary Control Valve

LV690 Series Rotary Control Valve LV690 Series Rotary Control Valve Made in USA Figure 1: LV690 Series Control Valve 1 Table of Contents Description 2 Features 2 General Data 3 Materials of Construction 5 Installation Information 5 Flow

More information

41005 Series Control Valves. Specification Data CH /10

41005 Series Control Valves. Specification Data CH /10 Putting You In Control Specification ata CH41005 11/10 41005 Series Control Valves Complete Line of Heavy uty, Balanced, Cage Guided, Globe Valves with Lo-dB Anti-Cavitation Capabilities resser Masoneilan

More information

Fisherr GX Control Valve and Actuator System

Fisherr GX Control Valve and Actuator System Product Bulletin D103171X012 GX Control Valve and Actuator Fisherr GX Control Valve and Actuator System The Fisher GX is a compact, state-of-the-art control valve and actuator system, designed to control

More information

Fisher Whisper Trim III Cages

Fisher Whisper Trim III Cages Whisper Trim III D10019101 Product Bulletin September 017 Fisher Whisper Trim III Cages Whisper Trim III cages provide effective attenuation of aerodynamic noise in vapor, gas, or steam applications involving

More information

Series 2700A, 2700E and 2720 Control Valves

Series 2700A, 2700E and 2720 Control Valves Series 2700A, 2700E and 2720 Control Valves Flexible Designs: Configurations, trims and actuators to suit your application Series 2700A Series 2720 The Series 2700 family of control valves offers the flexibility

More information

Model 363 Control Valve

Model 363 Control Valve echnical Sales Bulletin October 008 P-363B008A Features Versatility Multiple port sizes make the 363 an easy valve to reconfigure when process applications change. Rugged Design Available severe service

More information

Fisher 9500 Butterfly Control Valve

Fisher 9500 Butterfly Control Valve 9500 Product Bulletin Fisher 9500 Butterfly Control The Fisher 9500 butterfly valve is a fully lined valve for use with corrosive fluids and where tight shutoff is required. The nitrile or PTFE liner totally

More information

21000 Series. Masoneilan* Complete Line of Rugged, Top Guided, Globe Valves with Lo-dB* and Anti-Cavitation Capabilities

21000 Series. Masoneilan* Complete Line of Rugged, Top Guided, Globe Valves with Lo-dB* and Anti-Cavitation Capabilities GE Oil & Gas Technical Specifications 02/2016 Masoneilan* 21000 Series Complete Line of Rugged, Top Guided, Globe Valves with Lo-dB* and Anti-Cavitation Capabilities Table of Contents Numbering System...3

More information

Design V150S Slurry Vee-Ball Control Valve

Design V150S Slurry Vee-Ball Control Valve Product Bulletin Design V150S Slurry Vee-Ball Control Valve Slurry Vee-Ball Valve The Design V150S Slurry Vee-Ball valve shown in figure 1 mates with CL150 raised face flanges. Rugged construction, highly

More information

Series 2700A, 2700E and 2720 Control Valves

Series 2700A, 2700E and 2720 Control Valves Series 2700A, 2700E and 2720 Control Valves Flexible Designs: Series 2700A Series 2720 Configurations, trims and actuators to suit your application The Series 2700 family of control valves offers the flexibility

More information

Fisher D4 Control Valve Assembly

Fisher D4 Control Valve Assembly D4 Valve Product Bulletin Fisher D4 Control Valve Assembly The Fisher D4 control valve is a compact, rugged globe valve designed primarily for high-pressure throttling applications using either pneumatic

More information

Fisher A11 High-Performance Butterfly Valve

Fisher A11 High-Performance Butterfly Valve isher A11 igh-performance Butterfly Valve The isher A11 igh-performance Butterfly Valve maintains tight shutoff, and can be specified for a wide range of pressure and temperature conditions, including

More information

DF100 Control Valve. Features. Model. Patents Pending

DF100 Control Valve. Features. Model. Patents Pending Features NACE Service Ready Standard construction for the DF100 control valve features NACE trim. The valve bonnet and body also conform to NACE MR0175 (National Association of Corrosion Engineers) recommendations.

More information

Fisher ET and EAT easy e Valves CL125 through CL600

Fisher ET and EAT easy e Valves CL125 through CL600 Instruction Manual D0098X02 ET Valve December 200 Fisher ET and EAT easy e Valves CL25 through CL00 Contents Introduction... Scope of Manual... Description... 2 Specifications... Installation... Maintenance...

More information