SERIES GB CONTROL VALVES GLOBE-CAGE BALANCED, CAGE GUIDED

Size: px
Start display at page:

Download "SERIES GB CONTROL VALVES GLOBE-CAGE BALANCED, CAGE GUIDED"

Transcription

1 SERIES GB CONTROL VALVES GLOBE-CAGE BALANCED, CAGE GUIDED Metso's Neles series GB cage guided, balanced trim globe valves are economical high performance control valves designed to provide the best possible control accuracy and wide rangeability with all the inherent benefits of linear control valves. Standard units are equipped with spring diaphragm actuators and ND intelligent valve controllers for precise flow control, extended operational life and performance monitoring on-line. Construction Compact and lightweight construction Large range of trims with different Cv and characteristics per body size to fit many process conditions Both metal and soft seats are available depending on the application Optional bellows seal for toxic or other applications where no stem seal leakage is allowed Wide material selection for different applications Many end connection styles available for different applications Extension bonnet design for wide temperature range Accurate control Stable control with good rangeability ND9000 or NDX digital valve controller for auto-calibration and accurate control Accurate and sensitive diaphragm and piston actuators Wide range of applications Suitable for gas, liquid and steam Temperature limits C / ( F) with standard bonnet construction and over +260 C (+500 F) and under -29 C / (-20 F) with extended bonnets Large variation of trim designs from standard cage to Tendril 1 or Tendril 2 for low noise and anti-cavitation applications Pilot balanced trim for ANSI class V leakage requirements in high temperature application Various seat and seal ring options for wide range of applications Design application flexibility Wide range of applicable noise control components, silencers, baffle plates Inherently characterized trims offered in equal percentage, linear Large range of Cvs per body size allowing for wide applicable in process conditions High integrity cage guiding system and clamped cage for heavy duty guiding on severe service applications Low emission packings available Safety and quality Rugged one piece body to minimizes the leak paths and makes the valve less prone to pipe stress Strictly tested to ensure specified performance with quality assurance systems in accordance to ISO 9001 Certified ISO fugitive emissions Certified CE/PED & ATEX, TSG & EAC (GOST-R) Easy maintenance Quick change trim and top entry construction for easy in-line maintenance Self guided components makes for easy valve assembly Flow characteristics can be easily changed with interchangable trim components ND digital valve controller with online diagnostics enables performance follow up and predictive maintenance Efficient asset management with Metso FieldCare open architecture software and excellent networking capabilities 4 GV 25 EN 3/2018

2 METSO 4 GV 25 EN Different trim designs Standard cage trim Tendril(Multi-hole)trim Quick change, standard cage trim The standard cage trim is designed with a specially designed window shape cage and balanced plug. The window shape defines the flow path through the valve and the flow characteristic of the valve (linear, equal percentage, others ). The balancing holes are located in the top of the plug. This trim is suited for both high and low pressure drop application and is used in the majority of control applications. Tendril(Multi-hole)trim The trim design presented a multi-hole trim. There are Tendril 1 or Tendril 2 designs in standard depending on pressure drop and potential for cavitation. The pressure drop is divided by multi-holes so that the pressure progressively reduces as it passes through the trim. This gives excellent resistance to cavitation on high pressure drop applications. GB, Cage construction GB, Tendril construction 2 TECHNICAL BULLETIN 3/18

3 4 GV 25 EN SERIES GB CONTROL VALVES GLOBE-CAGE BALANCED, CAGE GUIDED Pilot balanced trim construction Pilot balanced trim Pilot balanced trim construction is designed with a special pilot plug & seat built-in the main plug. The design is applicable both 'conventional cage' and Tendril trim. This design gives excellent seat tightness to leakage on high pressure drop and high temperature applications. The design helps to achieve seat leakage class V in high temperature services. TECHNICAL BULLETIN 3/18 3

4 ., Ltd. 235 Cheomdansaneop 1-ro, Daesowon-myeon, Chungju-si, Chungcheongbuk-do, Korea GROUP DATE II 2 GD METSO 4 GV 25 EN Components & materials 9B 9A A 17B 17A 19A Part no. Description Material 1 BODY A216 WCB / ALLOY STEEL AVAILABLE 2 PLUG SET 410 SS / 630 SS + HCr * 3 PLUG 410 STAINLESS STEEL * 5 STEM 630 STAINLESS STEEL + HCr * 6 PLUG PIN 316 STAINLESS STEEL 7 SEAT RING 410 STAINLESS STEEL 8 BONNET A216 WCB / ALLOY STAINLESS STEEL 9A GLAND 304 STAINLESS STEEL 9B GLAND FLANGE A351 CF8 13 / 13A STUD A193 Gr.B7 14 STUD A193 Gr.B8 15 CAGE 630 STAINLESS STEEL + HCr 16 CAGE GUIDE 630 STAINLESS STEEL + HCr 17 HEXAGON NUT A194 Gr.2H 17A LIING PLATE JIS G3101-SS400 17B SPRING WASHER AISI HEXAGON NUT A194 Gr.8 19 IDNTIFICATION PLATE 304 STAINLESS STEEL 19A RIVET 304 STAINLESS STEEL 21 LANTERN RING 304 STAINLESS STEEL 63 SEAT GASKET S/W GASKET, 316 SS + GRAPHITE 64 SEAL RING PTFE + GRAPHITE 65 BODY GASKET S/W GASKET, 316 SS + GRAPHITE 67 PACKING SPACER 304 STAINLESS STEEL 69 PACKING RING PTFE + CARBON FIBER Note. 1. Plug/Seat Hard Facing (Cobalt based alloy) & Soft Seat are available 2. Materials description 316 SS : ASTM A276 TP316 or JIS 316 St. Steel 410 SS : ASTM A276 TP410 or JIS 410 St. Steel 17-4PH : ASTM A (H1100) or JIS 630(H1100) St. Steel 3. Above standard materials to be applicable depending on specific service conditions, other optional materials to consult Metso. 4. Optional materials to meet to requirements of NACE MR are available 5. The materials are subject to change as equivalent depending on detail design 6. The part no. 3*, *5, *6 are delivered as a set with no.2 Part no. Description Material 1 BODY A351 CF8M 2 PLUG SET 316 SS + HCr / 316 SS + HCr * 3 PLUG 316 STAINLESS STEEL + HCr * 5 STEM 316 STAINLESS STEEL + HCr * 6 PLUG PIN 316 STAINLESS STEEL 7 SEAT RING 316 STAINLESS STEEL 8 BONNET A351 CF8M 9A GLAND 304 STAINLESS STEEL 9B GLAND FLANGE A351 CF8 13 / 13A STUD A193 Gr.B8(M) 14 STUD A193 Gr.B8 15 CAGE 316 STAINLESS STEEL + HCr 16 CAGE GUIDE 316 STAINLESS STEEL + HCr 17 HEXAGON NUT A194 Gr.8(M) 17A LIING PLATE JIS G3101-SS400 17B SPRING WASHER AISI HEXAGON NUT A194 Gr.8 19 IDNTIFICATION PLATE 304 STAINLESS STEEL 19A RIVET 304 STAINLESS STEEL 21 LANTERN RING 304 STAINLESS STEEL 63 SEAT GASKET S/W GASKET, 316 SS + GRAPHITE 64 SEAL RING PTFE + GRAPHITE 65 BODY GASKET S/W GASKET, 316 SS + GRAPHITE 67 PACKING SPACER 304 STAINLESS STEEL 69 PACKING RING PTFE + CARBON FIBER Note. 1. Plug/Seat Hard Facing (Cobalt based alloy) & Soft Seat are available 2. Materials description 316 SS : ASTM A276 TP316 or JIS 316 St. Steel 3. Above standard materials to be applicable depending on specific service conditions. Other optional materials to cons 4. Cryogenic application : ASTM A320 B7M & 8M for Studs(13) and Nuts(17) 5. Optional materials to meet to requirements of NACE MR are available 6. The materials are subject to change as equivalent depending on detail design 7. The part no. 3*, *5, *6 are delivered as a set with no.2 4 TECHNICAL BULLETIN 3/18

5 4 GV 25 EN SERIES GB CONTROL VALVES GLOBE-CAGE BALANCED, CAGE GUIDED GB, Applications guide Temperature range PTFE + Graphite pressure energized seal with metal seat: C PTFE pressure energized seal with metal seat: C Metal seat: C Shut-off classification Class IV with soft seal & metal seat per ANSI I (0.01 % of valve rated capacity). Class V with soft seat or pilot balanced plug per ANSI I Soft seat Metal seat Soft seal (pressure enerqized) Soft seal with Back-up ring (pressure enerqized) Temperature range with different body and stud/nut materials Body, Bonnet Material Carbon steel (WCB, A105) Stainless steel (CF3, CF8,CF3M, CF8M) Cr.Mo. Steel (WC6, F11, WC9, F22, C12A, F91) *Please contact Metso Stud Bolt, Nut Application ASTM A193-B7 STUD ASTM A194-2H NUT ASTM A193(320)-B8(M) STUD ASTM A194(320)-8(M) NUT ASTM A193-B16 STUD ASTM A194-4 NUT Trim materials GB, Trim Temp. Plug Stem Seat Cage Range ( C) Sign 410 SS 630 SS + HCr 410 SS 630 SS + HCr -29 ~ +425 P1XBCS1R1X 316 SS 316 SS + HCr 316 SS 316 SS + HCr -196 ~ +425 T6XTCS1R6X 316 SS + Cobalt based 316 SS + HCr 316 SS + Cobalt based 316 SS + HCr -196 ~ +425 T6ATCS1R6A 420 J2 630 SS + HCr 420 J2 420 J2-29 ~ +500 * 316 SS 316 SS + HCr 316 SS + PTFE 316 SS + HCr -196 ~ +232 * 630 SS 630 SS + HCr 410 SS 410 SS -29 ~ +425 * Inconel 718 Inconel 718 F91 F91-29 ~ +593 * Inconel 625, 718, ~ +645 * *Please contact Metso Body,Bonnet Material Carbon steel WCB,A105 Gasket applications Gasket Material Packing applications Temp. Range ( C) Temp. Range ( C) Sign -29 ~ +425 A -196 ~ +593 B -29 ~ +593 * S/W (Spiral Wound) 316SS + Graphite -29 ~ +425 S S/W (Spiral Wound) Stainless steel 316SS + Graphite -196 ~ +593 S CF8,CF8M,CF3,CF3M S/W (Spiral Wound) 316SS + PTFE -196 ~ +232 L S/W (Spiral Wound) 316SS + Graphite + Non H Cr.Mo. Steel Asbestos WC6,WC9,F22, -29 ~ +593 C12A,F91 S/W (Spiral Wound) 316SS+ Graphite + Mica * (special Hi-Temp. max 950 C) *Please contact Metso Sign Packing Material Temp ( C) Pr. Class Sign PTFE + Carbon Fiber (Braided TEF + Graphite) -196 ~ +260 Up to CL900 G PTFE V-Ring ~ +232 Up to Cl600 T Graphite (with Mold + Braided) -196 ~ +400 Up to CL2500 F Hi-Graphite (with Mold + Braided) -196 ~ +593 Up to CL2500 H RTFE V ring + Metal - 40 ~ +350 Up to CL600 M TECHNICAL BULLETIN 3/18 5

6 METSO 4 GV 25 EN Plug General plug Flow directions Pilot balanced plug Series Cage Tendril 1 Tendril 1 Tendril 2 Tendril 2 General General Tendril 1 Tendril 2 (Gas) (Liquid) (Gas) (Liquid) GB C O C O C C C C * O: Flow to open C: Flow to close Cv Ratio 50 : 1 Flow Characteristics Equal percentage, linear *Note 1. RF: Raised Face Flange, RTJ: Ring Joint, SW: Socket Weld, BW: Butt Weld. Bigger sizes are available, please contact Metso. GB, Ratings & end connections GB, ASME Ratings Valve Size DN / Inch Class 150 ~ 600 Class 900 ~ 1500 Class 2500 RF RTJ SW BW RF RTJ SW BW RF RTJ BW 50 / 2 O O O O O O O O O O O 80 / 3 O O O O O O O O O 100 / 4 O O O O O O O O O 150 / 6 O O O O O O O O O 200 / 8 O O O O O O O O O 250 / 10 O O O O O O 300 / 12 O O O O O O 350 / 14 O O O O O O 400 / 16 O O O O O O Packing constructions B 9A A Gland 9B Gland Flange 12 Disk Spring Ass'y 14 Stud 18 Hexagon Nut 21 Lantern Ring 67 Packing Spacer 69 Packing Ring Standard construction Low Emission with Live Load Spring 6 TECHNICAL BULLETIN 3/18

7 4 GV 25 EN SERIES GB CONTROL VALVES GLOBE-CAGE BALANCED, CAGE GUIDED Rated Cv and trim table (Globe Single seat, Cage Balanced Type, Series GB) TRIM GB, RATED Cv Sign TRIM TYPE Sign Sign Characte-ristic Desc. 2" (Srk) 3" (Srk) 4" (Srk) 6" (Srk) 8" (Srk) 10" (Srk) 12" (Srk) 14" (Srk) 16" (Srk) A General Plug Type L Linear Full Cv 74 (40) 142 (50) 230 (50) 380 (60) 600 (70) 950 (80) 1270 (120) 1740 (140) 2215 (160) P Pilot Balanced Plug Type NOTE 1. Rated Cvs are applied differently depending on the trim type & trim characreistics. 2. The bigger Cvs and sizes are available, please contact Metso. 3. (Srk) means the valve stroke in mm. 4. The other Cvs and trim types : please contact Metso. 1A 1-Step 48 (40) 98 (50) 160 (50) 275 (60) 455 (70) 700 (80) 970 (120) 1300 (140) 1530 (160) 2A 2-Step 26 (40) 56 (50) 86 (50) 150 (60) 254 (70) 398 (80) 550 (120) 776 (140) 940 (160) 3A 3-Step 16 (40) 34 (50) 52 (50) 90 (60) 152 (70) 238 (80) 340 (120) 464 (140) 568 (160) Full Cv 64 (40) 138 (50) 210 (50) 370 (60) 610 (70) 960 (80) 1320 (120) 1890 (140) 2300 (160) 1T 1-Step 38 (40) 84 (50) 128 (50) 220 (60) 365 (70) 580 (80) 794 (120) 1136 (140) 1384 (160) 2T 2-Step 22 (40) 52 (50) 78 (50) 132 (60) 224 (70) 348 (80) 476 (120) 682 (140) 836 (160) 3T 3-Step 14 (40) 32 (50) 46 (50) 82 (60) 134 (70) 208 (80) 286 (120) 410 (140) 500 (160) FM Full Cv 44 (40) 96 (50) 146 (50) 258 (60) 428 (70) 676 (80) 920 (120) 1320 (140) 1610 (160) 1M 1-Step 26 (40) 58 (50) 88 (50) 154 (60) 256 (70) 406 (80) 554 (120) 796 (140) 968 (160) 2M 2-Step 16 (40) 34 (50) 52 (50) 92 (60) 154 (70) 242 (80) 332 (120) 478 (140) 580 (160) 3M 3-Step 10 (40) 20 (50) 32 (50) 56 (60) 92 (70) 146 (80) 200 (120) 286 (140) 348 (160) E Equal % Full Cv 71 (40) 138 (50) 210 (50) 340 (60) 560 (70) 830 (80) 1240 (120) 1650 (140) 2090 (160) 1A 1-Step 50 (40) 110 (50) 160 (50) 270 (60) 450 (70) 655 (80) 960 (120) 1275 (140) 1680 (160) 2A 2-Step 24 (40) 50 (50) 82 (50) 136 (60) 236 (70) 374 (80) 524 (120) 746 (140) 854 (160) 3A 3-Step 14 (40) 32 (50) 50 (50) 82 (60) 142 (70) 224 (80) 314 (120) 446 (140) 512 (160) Full Cv 54 (40) 124 (50) 200 (50) 336 (60) 570 (70) 880 (80) 1260 (120) 1760 (140) 2080 (160) 1T 1-Step 32 (40) 74 (50) 124 (50) 200 (60) 340 (70) 520 (80) 758 (120) 1060 (140) 1248 (160) 2T 2-Step 20 (40) 46 (50) 76 (50) 120 (60) 204 (70) 310 (80) 456 (120) 638 (140) 750 (160) 3T 3-Step 12 (40) 28 (50) 48 (50) 72 (60) 124 (70) 186 (80) 278 (120) 382 (140) 454 (160) FM Full Cv 38 (40) 86 (50) 140 (50) 234 (60) 400 (70) 620 (80) 880 (120) 1240 (140) 1460 (160) 1M 1-Step 22 (40) 52 (50) 84 (50) 140 (60) 240 (70) 372 (80) 528 (120) 746 (140) 876 (160) 2M 2-Step 14 (40) 32 (50) 54 (50) 84 (60) 146 (70) 224 (80) 320 (120) 448 (140) 524 (160) 3M 3-Step 8 (40) 18 (50) 30 (50) 50 (60) 88 (70) 134 (80) 194 (120) 268 (140) 316 (160) TECHNICAL BULLETIN 3/18 7

8 METSO 4 GV 25 EN ASME Class: 150# ~ 600# GB Series Cv vs travel Standard Trim (CAGE) Size: 2 " ~ 16" Flow Characteristic: LINEAR Valve Travel [%] FL Valve Size Orifice Dia. Travel Rated Cv Inch mm Sign Inch mm Inch mm A A A A A A A A A A A A A A A A A A A A A A A A A A A NOTE C v : Valve flow coefficient F L : Liquid pressure recovery factor F C : Full Capacity 1A: 1-Step reduction 2A: 2-Step reduction 3A: 3-Step reduction * The bigger Cvs and sizes are available, please contact Metso. 8 TECHNICAL BULLETIN 3/18

9 4 GV 25 EN SERIES GB CONTROL VALVES GLOBE-CAGE BALANCED, CAGE GUIDED ASME Class: 150# ~ 600# GB Series Cv vs travel Standard Trim (CAGE) Size: 2 " ~ 16" Flow Characteristic: EQ-% Valve Travel [%] FL Valve Size Orifice Dia. Travel Rated Cv Inch mm Sign Inch mm Inch mm A A A A A A A A A A A A A A A A A A A A A A A A A A A NOTE C v : Valve flow coefficient F L : Liquid pressure recovery factor F C : Full Capacity 1A: 1-Step reduction 2A: 2-Step reduction 3A: 3-Step reduction * The bigger Cvs and sizes are available, please contact Metso. TECHNICAL BULLETIN 3/18 9

10 METSO 4 GV 25 EN ASME Class: 150# ~ 600# GB Series CV vs travel Standard Trim (Tendril 1) Size: 2 " ~ 24" Flow Characteristic: LINEAR Valve Travel [%] FL Valve Size Orifice Dia. Travel Inch mm Sign Inch mm Inch mm Rated Cv T T T T T T T T T T T T T T T T T T T T T T T T T T T NOTE C v : Valve flow coefficient F L : Liquid pressure recovery factor F C : Full Capacity 1A: 1-Step reduction 2A: 2-Step reduction 3A: 3-Step reduction * The larger Cvs and sizes are available, please contact Metso. 10 TECHNICAL BULLETIN 3/18

11 4 GV 25 EN SERIES GB CONTROL VALVES GLOBE-CAGE BALANCED, CAGE GUIDED GB, Valve dimensions and weights DRILLING Dia. Of Hole = F D Pitch Circle Dia. = G No of Hole. = H neles SIZE-RATING MATERIAL HEAT NO. ØE B C c A EXTENSION 150 #/ 300 #/ 600 # Dimension A B C D E F G H Weight (kg) (Approximate) Size 150# 300# 600# 150# 300# 600# STD EXT CRY COMMON 150# 300# 600# 150# 300# 600# 150# 300# 600# 150# 300# 600# 150# 300# 600# Dimension (inch) A B C D E F G H Weight (lbs) (Approximate) Size 150# 300# 600# 150# 300# 600# STD (inch) EXT CRY COMMON 150# 300# 600# 150# 300# 600# 150# 300# 600# 150# 300# 600# 150# 300# 600# 2" " " " " " " " " TECHNICAL BULLETIN 3/18 11

12 METSO 4 GV 25 EN 900 #/ 1500# Dimension A B C D E F G H Weight (kg) (Approximate) Size 900# 1500# 900# 1500# STD EXT COMMON 900# 1500# 900# 1500# 900# 1500# 900# 1500# 900# 1500# Dimension (inch) A B C D E F G H Weight (lbs) (Approximate) Size (inch) 900# 1500# 900# 1500# STD EXT COMMON 900# 1500# 900# 1500# 900# 1500# 900# 1500# 900# 1500# 1-1/2" " " " " " " " " " * Bigger sizes and ASME class 2500 ratings are available, please contact Metso. 12 TECHNICAL BULLETIN 3/18

13 4 GV 25 EN SERIES GB CONTROL VALVES GLOBE-CAGE BALANCED, CAGE GUIDED VD Diaphragm actuators Actuator dimensions VDD VDR VDD/R E VDD/R D Side handwheel(25/29/37) Standard spring High spring Standard spring Dimension Size Without handwheel A2 Bd / Bhd Br / Bhr Weight (kg) With handwheel A2 A3 Bdh Brh VD_25 E VD_25 D VD_29 E VD_29 D VD_37 E VD_37 D Weight (kg) Dimension (inch) Size (inch) Without handwheel A2 Bd / Bhd Br / Bhr Weight (lbs) With handwheel A2 A3 Bdh Brh VD_25 E VD_25 D VD_29 E VD_29 D VD_37 E VD_37 D Weight (lbs) TECHNICAL BULLETIN 3/18 13

14 METSO 4 GV 25 EN Bdh Brh Cdh Crh Top side handwheel (VDD48/55) Top side handwheel (VDR48/55) Dimension Without handwheel With handwheel Size A2 Bd / Bhd Br / Bhr Weight (kg) Bdh Brh Cdh Crh VD_48 E VD_48 D VD_55 E VD_55 D Weight (kg) Dimension (inch) Without handwheel With handwheel Size (inch) A2 Bd / Bhd Br / Bhr Weight (lbs) Bdh Brh Cdh Crh VD_48 E VD_48 D VD_55 E VD_55 D NOTE 1. "E" refers to Spring range 0.8~2.6 bar-g. 2. "D" refers to Spring range 1.5~3.4 bar-g. 3. "Br / Bhr" refers to reverse acting actuator, VDR E / D 4. "Bd / Bhd" refers to direct acting actuator, VDD E / D 5. "Cdh / Crh" Top side handwheel actuator, VD_48/55 Weight (lbs) 14 TECHNICAL BULLETIN 3/18

15 4 GV 25 EN SERIES GB CONTROL VALVES GLOBE-CAGE BALANCED, CAGE GUIDED VC cylinder actuators without handwheel Actuator dimensions A B ØC ØC B1 B2 VC, without volume chamber VC, with volume chamber VC actuators without handwheel Stroke #30 #40 #50 ØC 370 ØC 460 ØC 560 B1 Weight (kg) B1 Weight (kg) B1 Weight (kg) B2 A B B2 A B B2 A B Stroke #60 #70 #80 ØC 660 ØC 710 ØC 820 B1 Weight(kg) B1 Weight(kg) B1 Weight(kg) B2 A B B2 A B B2 A B VC actuators without handwheel Stroke #30 #40 #50 ØC 15 ØC 18 ØC 22 B1 Weight (lbs) B1 Weight (lbs) B1 Weight (lbs) B2 A B B2 A B B2 A B Stroke #60 #70 #80 ØC 26 ØC 28 ØC 32 B1 Weight(lbs) B1 Weight(lbs) B1 Weight(lbs) B2 A B B2 A B B2 A B TECHNICAL BULLETIN 3/18 15

16 METSO 4 GV 25 EN VC cylinder actuators withhandwheel Actuator dimensions A ØC B ØC B1 B2 VC, with optional handwheel VC, with optional handwheel & volume chamber VC actuators with handwheel Stroke #30 #40 #50 ØC 370 ØC 460 ØC 560 B1 Weight (kg) B1 Weight (kg) B1 Weight (kg) B2 A B B2 A B B2 A B Stroke #60 #70 #80 ØC 660 ØC 710 ØC 820 B1 Weight (kg) B1 Weight (kg) B1 Weight (kg) B2 A B B2 A B B2 A B Stroke #30 #40 #50 ØC 15 ØC 18 ØC 22 B1 Weight (lbs) B1 Weight (lbs) B1 Weight (lbs) B2 A B B2 A B B2 A B Stroke #60 #70 #80 ØC 26 ØC 28 ØC 32 B1 Weight (lbs) B1 Weight (lbs) B1 Weight (lbs) B2 A B B2 A B B2 A B TECHNICAL BULLETIN 3/18

17 4 GV 25 EN SERIES GB CONTROL VALVES GLOBE-CAGE BALANCED, CAGE GUIDED HOW TO ORDER Globe Balanced, Cage Guided Type, Series GB GB 03 C W A J2 B P1 X BC S1 R1 X S G G S A X A L VALVE CONSTRUCTIONS 1. VALVE SERIES GB Globe Balanced, Cage guided type 2. BODY SIZE 02 2"/ DN "/ DN "/ DN "/ DN "/ DN "/ DN "/ DN "/ DN "/ DN 400 Optional Body Size 18 18"/ DN "/ DN "/ DN 600 YY Special 3. PRESSURE RATING C ASME class 150 D ASME class 300 F ASME class 600 Optional Pressure Rating G ASME class 900 H ASME class 1500 I ASME class 2500 Y Special 4. END CONNECTION W Flanged RF, ASME B16.5 Optional End Connection Z Ring joint flange, ASME B16.5 V Socket welding, ASME B16.11 Q Butt welding, ASME B16.25 Y Special 5. BONNET CONSTRUCTION Bonnet Type Actuator Connection A General Applicable for VD_25/29/37 B General Applicable for VD_48/55 C General Applicable for VC_30 D General Applicable for VC_40/50/60/70 Optional Bonnet Construction E Extension Applicable for VD_25/29/37 F Extension Applicable for VD_48/55 G Extension Applicable for VC_30 H Extension Applicable for VC_40/50/60/70 J Bellows Seals Applicable for VD_25/29/37 K Bellows Seals Applicable for VD_48/55 L Bellows Seals Applicable for VC_30 M Bellows Seals Applicable for VC_40/50/60/70 Y Special Special TRIM CONSTRUCTIONS PLUG MATERIAL 8. Material Description P1 CA15 / 410 SS Standard for carbon steel body T6 CF8M / 316 SS Standard for stainless steel body YY Special Special materials 9. PLUG APPLICATION X Not applicable A Y Cobalt based alloy Special STEM MATERIAL 10. Material Description BC 630 SS + HCr Standard for carbon steel body TC 316 SS + HCr Standard for stainless steel body YY Special Special materials 11. SEAT TYPE S1 Single metal seat T1 YY Single soft seat Special Optional Seat Type SEAT / CAGE MATERIAL 12. Seat Cage Cage Guide R1 CA15 / 410 SS CB7Cu-1 / 630 SS + HCr CB7Cu-1 / 630 SS + HCr R6 CF8M / 316 SS CF8M / 316 SS + HCr CF8M / 316 SS + HCr YY Special Special Special - CA15 is the standard material for carbon steel body. - CF8M is the standard material for stainless steel body. 13. SEAT APPLICATION X Not applicable A P Y Cobalt based alloy Insert PTFE Special Optional Seat Application 6. BODY MATERIAL J2 A216 gr. WCB S6 A351 gr. CF8M Optional Body & Bonnet Material S1 A351 gr. CF3M YY Special - Bonnet material is same or equivalent with Body material. 7. MODEL CODE A Model A B Model B * Face to face length according to ISA * The body, bonnet, trim materials are subject to change as equivalent depending on detail design. * Please see 'Neles Globe Typecode Instruction' for further options. TECHNICAL BULLETIN 3/18 17

18 METSO 4 GV 25 EN OTHERS 14. PACKING / BELLOWS TYPE S General packing Optional Packing Type E Low Emission, Live Loaded C Bellows Seal (316L SS, Formed) Y Special 17. GASKET MATERIAL S S/W gasket type, 316 SS + Graphite for general Optional Gasket Material H S/W gasket type, 316 SS + Graphite for high temp. L S/W gasket type, 316 SS + PTFE Y Special 15. PACKING MATERIAL G PTFE + Carbon fiber F Graphite (with mold and braided) Optional Packing Material T PTFE V-Ring H Hi-Graphite (with mold + braided) Y Special 16. SEAL RING MATERIAL G PTFE + Graphite Optional Seals Material T PTFE Y Special 18. STUD / NUT MATERIAL A A193 gr. B7 / A194 gr. 2H B A193 gr. B8 / A194 gr. 8 Optional Bolting Material H A193 gr. B16 / A194 gr. 4 Y Special 19. OPTIONS X Not applicable E Anti-erosion L Lub. & Isol. valve W Water seal Y Special 18 TECHNICAL BULLETIN 3/18

19 4 GV 25 EN SERIES GB CONTROL VALVES GLOBE-CAGE BALANCED, CAGE GUIDED TRIM TYPE & RATED Cv RATED Cv TRIM TRIM TYPE Body Size and Stroke Sign Sign CHARACTERISTIC Sign Description 2" Srk. 3" Srk. 4" Srk. 6" Srk. 8" Srk. 10" Srk. 12" Srk. 14" Srk. 16" Srk. General A plug type L Linear General / Full capacity 74 (40) 142 (50) 230 (50) 380 (60) 600 (70) 950 (80) 1270 (120) 1740 (140) 2215 (160) P Pilot balanced plug type 1A General 1-Step reduction / 48 (40) 98 (50) 160 (50) 275 (60) 455 (70) 700 (80) 970 (120) 1300 (140) 1530 (160) 2A General / 26 (40) 56 (50) 86 (50) 150 (60) 254 (70) 398 (80) 550 (120) 776 (140) 940 (160) 2-Step reduction 3A General / 3-Step reduction 16 (40) 34 (50) 52 (50) 90 (60) 152 (70) 238 (80) 340 (120) 464 (140) 568 (160) Tendril 1 / Full capacity 52 (40) 102 (50) 160 (50) 290 (60) 460 (70) 630 (80) 980 (120) 1300 (140) 1580 (160) 1T Tendril 1 / 40 (40) 42 (50) 120 (50) 220 (60) 340 (70) 460 (80) 735 (120) 985 (140) 1145 (160) 1-Step reduction 2T Tendril 1 / 2-Step reduction 27 (40) 10 (50) 70 (50) 130 (60) 195 (70) 255 (80) 405 (120) 565 (140) 670 (160) 3T Tendril 3-Step reduction 1 / 10 (40) 21 (50) 46 (50) 75 (60) 105 (70) 140 (80) 240 (120) 310 (140) 410 (160) FM Tendril 2 / 50 (40) 100 (50) 155 (50) 280 (60) 425 (70) 590 (80) 920 (120) 1240 (140) 1530 (160) Full capacity 1M Tendril 2 / 1-Step reduction 35 (40) 74 (50) 115 (50) 215 (60) 330 (70) 450 (80) 720 (120) 970 (140) 1130 (160) 2M Tendril 2-Step reduction 2 / 23 (40) 33 (50) 65 (50) 12 (60) 190 (70) 240 (80) 380 (120) 550 (140) 640 (160) 3M Tendril 2 / 8 (40) 18 (50) 38 (50) 67 (60) 100 (70) 130 (80) 220 (120) 290 (140) 390 (160) 3-Step reduction E Equal % General / 71 (40) 138 (50) 210 (50) 340 (60) 560 (70) 830 (80) 1240 (120) 1650 (140) 2090 (160) Full capacity 1A General 1-Step reduction / 50 (40) 110 (50) 160 (50) 270 (60) 450 (70) 655 (80) 960 (120) 1275 (140) 1680 (160) 2A General / 24 (40) 50 (50) 82 (50) 136 (60) 236 (70) 374 (80) 524 (120) 746 (140) 854 (160) 2-Step reduction 3A General / 3-Step reduction 14 (40) 32 (50) 50 (50) 82 (60) 142 (70) 224 (80) 314 (120) 446 (140) 512 (160) Tendril 1 / Full capacity 50 (40) 82 (50) 135 (50) 235 (60) 370 (70) 500 (80) 840 (120) 1110 (140) 1400 (160) 1T Tendril 1 / 35 (40) 58 (50) 95 (50) 170 (60) 265 (70) 370 (80) 600 (120) 785 (140) 1020 (160) 1-Step reduction 2T Tendril 1 / 20 (40) 35 (50) 58 (50) 100 (60) 170 (70) 225 (80) 355 (120) 480 (140) 600 (160) 2-Step reduction 3T Tendril 3-Step reduction 1 / 10 (40) 20 (50) 32 (50) 58 (60) 105 (70) 125 (80) 205 (120) 290 (140) 350 (160) FM Tendril 2 / 47 (40) 74 (50) 130 (50) 230 (60) 330 (70) 470 (80) 770 (120) 1050 (140) 1320 (160) Full capacity 1M Tendril 2 / 1-Step reduction 33 (40) 56 (50) 92 (50) 165 (60) 245 (70) 330 (80) 570 (120) 720 (140) 960 (160) 2M Tendril 2-Step reduction 2 / 19 (40) 33 (50) 52 (50) 95 (60) 145 (70) 190 (80) 330 (120) 430 (140) 550 (160) 3M Tendril 2 / 8 (40) 16 (50) 25 (50) 52 (60) 80 (70) 110 (80) 190 (120) 270 (140) 295 (160) 3-Step reduction Y Special Y Special YY Special Contact Metso for Cv details - Rated Cv is different by the trim type and characteristic. - Srk means valve stroke in mm. TECHNICAL BULLETIN 3/18 19

20 Metso Corporation Töölönlahdenkatu 2, PO Box 1220, Helsinki, Finland Tel Subject to change without prior notice. Product names in this bulletin are all trademarks of Metso Flow Control Inc. Metso Flow Control Inc. Vanha Porvoontie 229, P.O. Box 304, FI VANTAA, Finland. Tel Fax

SERIES GU CONTROL VALVES GLOBE-SINGLE SEATED, TOP GUIDED

SERIES GU CONTROL VALVES GLOBE-SINGLE SEATED, TOP GUIDED SERIES GU CONTROL VALVES GLOBE-SINGLE SEATED, TOP GUIDED Metso's Neles series GU single seated, top guided globe valves are economical high-performance control valves designed to provide the best possible

More information

Series A angle pattern control valves

Series A angle pattern control valves Series A angle pattern control valves AU: Angle pattern-unbalanced top guided AB: Angle pattern-balanced cage guided AM: Angle pattern-omega multi-path & multi-stage Metso's Neles A series angle pattern

More information

Series A angle pattern control valves

Series A angle pattern control valves Series A angle pattern control valves AU: Angle pattern-unbalanced top guided AB: Angle pattern-balanced cage guided AM: Angle pattern-omega multi-path & multi-stage Metso's Neles A series angle pattern

More information

SERIES GM CONTROL VALVES GLOBE-OMEGA, MULTI-PATH & MULTI-STAGE TRIM

SERIES GM CONTROL VALVES GLOBE-OMEGA, MULTI-PATH & MULTI-STAGE TRIM SERIES GM CONTROL VALVES GLOBE-OMEGA, MULTI-PATH & MULTI-STAGE TRIM The series GM, Omega trim valves are most suitable for high pressure drop applications of both compressible and uncompressible fluids

More information

Control Valves Globe-Unbalanced Single Seated, Series GU Installation, Maintenance and Operating Instructions

Control Valves Globe-Unbalanced Single Seated, Series GU Installation, Maintenance and Operating Instructions Control Valves Globe-Unbalanced Single Seated, Top Guide Series GU Installation, Maintenance and Operating Instructions 4 GV 71 en 9/2017 2 4 GV 71 en Table of Contents 1 GENERAL...3 1.1 Scope of the manual...3

More information

Series A Installation, Maintenance and Operating Instructions

Series A Installation, Maintenance and Operating Instructions Control Valves AU : Angle pattern - Unbalanced Single Seated, Top Guide AB : Angle pattern - Balanced Single Seated, Cage Guide AM : Angle pattern - Omega, Multistage trim Series A Installation, Maintenance

More information

Control Valves Globe-Omega, Multistage trim Series GM Installation, Maintenance and Operating Instructions

Control Valves Globe-Omega, Multistage trim Series GM Installation, Maintenance and Operating Instructions Control Valves Globe-Omega, Multistage trim Series GM Installation, Maintenance and Operating Instructions 4 GV 70 en 2/2017 2 4 GV 70 en Table of Contents 1 GENERAL...3 1.1 Scope of the manual...3 1.2

More information

NELES ROTARYGLOBE CONTROL VALVE, SERIES ZX

NELES ROTARYGLOBE CONTROL VALVE, SERIES ZX NELES ROTARYGLOBE CONTROL VALVE, SERIES ZX Metso's Neles RotaryGlobe control valve is designed to control a wide range of process liquids, gases and vapors. Its reliable and rugged construction with variety

More information

Series VD Pneumatic diaphragm. actuators.

Series VD Pneumatic diaphragm. actuators. Series VD Pneumatic diaphragm actuators Metso's Neles series VD actuators are exclusively developed for linear valves. They provide safe and reliable operation and are well suited for many different kind

More information

Control Valves Globe 3-way, Diverting & Mixing type Series GW Installation, Maintenance and Operating Instructions

Control Valves Globe 3-way, Diverting & Mixing type Series GW Installation, Maintenance and Operating Instructions Control Valves Globe 3-way, Diverting & Mixing type Series GW Installation, Maintenance and Operating Instructions 4 GV 74 en 2/2017 2 4 GV 74 en Table of Contents 1 GENERAL...3 1.1 Scope of the manual...3

More information

NELES TRUNNION MOUNTED BALL VALVE SERIES D

NELES TRUNNION MOUNTED BALL VALVE SERIES D NELES TRUNNION MOUNTED BALL VALVE SERIES D Metso's Neles series D is a trunnion mounted ball valve for demanding on/off and control applications. Valve series incorporates Metso's several decade experience

More information

NELES RE2-SERIES V-PORT SEGMENT VALVE

NELES RE2-SERIES V-PORT SEGMENT VALVE NELES RE2-SERIES V-PORT SEGMENT VALVE Metso's Neles RE2-Series control valves are economical high performance valves in a quarterturn design. They are offered with a variety of trim options from standard

More information

Control Valves Globe 3-way, Diverting & Mixing type Series GW Installation, Maintenance and Operating Instructions

Control Valves Globe 3-way, Diverting & Mixing type Series GW Installation, Maintenance and Operating Instructions Control Valves Globe 3-way, Diverting & Mixing type Series GW Installation, Maintenance and Operating Instructions 4 GV 74 en 11/2013 2 4 GV 74 en Table of Contents 1 GENERAL...3 1.1 Scope of the manual...3

More information

METSO NELES HIGH PERFORMANCE VALVE, METAL SEATED SERIES BW

METSO NELES HIGH PERFORMANCE VALVE, METAL SEATED SERIES BW METSO NELES HIGH PERFORMANCE VALVE, METAL SEATED SERIES BW Neles BW series metal seated high performance butterfly valve with one piece body design, for both control and tight shut-off applications. Multiple

More information

NELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X

NELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X NELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X Metso's Neles series X is a seat supported modular ball valve. Neles X series valves incorporate robust stem to ball connection.

More information

NELES RE-SERIES V-PORT SEGMENT VALVE

NELES RE-SERIES V-PORT SEGMENT VALVE NELES RE-SERIES V-PORT SEGMENT VALVE Metso's Neles RE series V-port segment valve are economical high performance valves in a quarterturn design. They are offered with a variety of trim options from standard

More information

CONTROL VALVE STANDARD SPECIFICATION

CONTROL VALVE STANDARD SPECIFICATION CONTROL VALVE STANDARD SPECIFICATION QUICK CHANGE TYPE 2-WAY GLOBE VALVE YAD-122Q1 Series http://www.proval.co.kr PROVAL Co., Ltd. [B-1] TOP GUIDE SINGLE SEATED TYPE GENERAL The design of Quick Change

More information

NELES HIGH CAPACITY TRIPLE ECCENTRIC DISC VALVE, METAL SEATED NELDISC SERIES L6

NELES HIGH CAPACITY TRIPLE ECCENTRIC DISC VALVE, METAL SEATED NELDISC SERIES L6 NELES HIGH CAPACITY TRIPLE ECCENTRIC DISC ALE, METAL SEATED NELDISC SERIES L6 Metso's Neles series L6 is a double flanged metal seated Neldisc triple eccentric disc valve with one piece body design, for

More information

41005 Series Control Valves. Specification Data CH /10

41005 Series Control Valves. Specification Data CH /10 Putting You In Control Specification ata CH41005 11/10 41005 Series Control Valves Complete Line of Heavy uty, Balanced, Cage Guided, Globe Valves with Lo-dB Anti-Cavitation Capabilities resser Masoneilan

More information

Series 3500 Control Valves Globe-3-Way Mixing Valves Globe-3-Way Diverting Valves

Series 3500 Control Valves Globe-3-Way Mixing Valves Globe-3-Way Diverting Valves Product Specification PS100401 2010. 04 Series 3500 Control Valves Globe-3-Way Mixing Valves Globe-3-Way Diverting Valves for promotes more tightness and heavy duty control Series 3500 Control Valves Globe

More information

21000 Series Control Valves

21000 Series Control Valves GE Oil & Gas Technical Specifications 09/2012 Masoneilan * Valves 21000 Series Control Valves Complete Line of Rugged, Top Guided, Globe Valves with Lo-dB * & Anti-Cavitation Capabilities Table of Contents

More information

21000 Series. Masoneilan* Complete Line of Rugged, Top Guided, Globe Valves with Lo-dB* and Anti-Cavitation Capabilities

21000 Series. Masoneilan* Complete Line of Rugged, Top Guided, Globe Valves with Lo-dB* and Anti-Cavitation Capabilities GE Oil & Gas Technical Specifications 02/2016 Masoneilan* 21000 Series Complete Line of Rugged, Top Guided, Globe Valves with Lo-dB* and Anti-Cavitation Capabilities Table of Contents Numbering System...3

More information

Series 2000 Top Guided Control Valve

Series 2000 Top Guided Control Valve Series 2000 Top Guided Control Valve Series 2000 Control Valve Series 2000 process Control Valves. Sturdy design with special service trims available for: Cavitation Control Noise Reduction Top entry construction

More information

GLOBE CONTROL VALVES FOR CRYOGENIC SERVICE

GLOBE CONTROL VALVES FOR CRYOGENIC SERVICE GLOBE CONTROL VALVES FOR CRYOGENIC SERVICE 1-6940 Cryo valves are especially designed for cryogenic service. The construction is the same of 1-6941 and 1-6943 standard globe valves with the exception of

More information

NELES R-SERIES SEGMENT VALVE Flanged RE and Wafer RE1

NELES R-SERIES SEGMENT VALVE Flanged RE and Wafer RE1 NELES R-SERIES SEGMENT VALVE Flanged RE and Wafer RE1 Metso's Neles RE series control valves are economical, high performance valves in a quarterturn design. They are offered with a variety of trim options

More information

NELES FINETROL ECCENTRIC ROTARY PLUG CONTROL VALVE, SERIES FC

NELES FINETROL ECCENTRIC ROTARY PLUG CONTROL VALVE, SERIES FC NELES FINETROL ECCENTRIC ROTARY PLUG CONTROL VALVE, SERIES FC Finetrol eccentric rotary plug valves are economical high-performance control valves designed to provide the best possible control accuracy

More information

Series 2000 Control Valves Globe-Double Seated, Top & Bottom Guide

Series 2000 Control Valves Globe-Double Seated, Top & Bottom Guide Product Specification PS100401 2010. 04 Series 2000 Control Valves Globe-ouble Seated, Top & Bottom Guide for promotes more tightness and heavy duty control Series 2000 Single Seated Globe Valve with Model

More information

NELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X

NELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X NELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X Metso's Neles series X is a seat supported modular ball valve. Neles X series valves incorporate robust stem to ball connection.

More information

DBOY Series Pneumatic Control Valve

DBOY Series Pneumatic Control Valve Applications Process control systems for food, pulp and paper, chemical, petrochemical & other industries HVAC systems Feed water and fuel system controls in boiler rooms Packaged systems (OEM) such as

More information

Honeywell EN REV. 2 09/2014 Page 1 of 10 Specification

Honeywell EN REV. 2 09/2014 Page 1 of 10 Specification Series 9110 Single/Double Seated Globe Valves for ANSI 150-600 DIN/BS 4504 PN10-PN40 Honeywell 70-16-10-05 EN REV. 2 09/2014 Page 1 of 10 Specification Series 9110 Single/Double Seated Globe Valves for

More information

NELES HIGH PERFORMANCE TRIPLE ECCENTRIC DISC VALVE, METAL SEATED NELDISC SERIES L12

NELES HIGH PERFORMANCE TRIPLE ECCENTRIC DISC VALVE, METAL SEATED NELDISC SERIES L12 NELES HIGH PERFORMANCE TRIPLE ECCENTRIC DISC VALVE, METAL SEATED NELDISC SERIES L12 Metso's Neles Neldisc series L12 a wafe type, metal seated high performance triple eccentric disc valve. With close to

More information

NELES SOFT SEATED BUTTERFLY VALVE SERIES MAPAG BA FOR PSA PLANT ON/OFF AND CONTROL SERVICE

NELES SOFT SEATED BUTTERFLY VALVE SERIES MAPAG BA FOR PSA PLANT ON/OFF AND CONTROL SERVICE NELES SOFT SEATED BUTTERFLY VALVE SERIES MAPAG BA FOR PSA PLANT ON/OFF AND CONTROL SERVICE Series Mapag BA is a wafer type butterfly valve with a one piece body and soft seat.. It is specially designed

More information

BOSS Series D Control Valve

BOSS Series D Control Valve Applications Process control systems for food, pulp and paper, chemical, petrochemical & other industries HVAC systems Feed water and fuel system controls in boiler rooms Packaged systems (OEM) such as

More information

Series VC Pneumatic cylinder actuators

Series VC Pneumatic cylinder actuators Series VC Pneumatic cylinder actuators Metso`s Neles series VC actuators are exclusively developed for linear valves. The VC double acting cylinder type actuators are designed for use in both modulating

More information

NELES BO SERIES BUTTERFLY VALVE FOR RECOVERY OF OXYGEN IN VACUUM PRESSURE SWING ADSORPTION (VPSA) PLANTS

NELES BO SERIES BUTTERFLY VALVE FOR RECOVERY OF OXYGEN IN VACUUM PRESSURE SWING ADSORPTION (VPSA) PLANTS NELES BO SERIES BUTTERFLY VALVE FOR RECOVERY OF OXYGEN IN VACUUM PRESSURE SWING ADSORPTION (VPSA) PLANTS Metso's Neles BO series butterfly valve is designed for use in vacuum Pressure Swing Adsorption

More information

NELES METAL SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X

NELES METAL SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X NELES METAL SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X Metso's Neles series X is a seat supported modular ball valve. Neles X series valves incorporate robust stem to ball connection.

More information

METSO NELES HIGH PERFORMANCE TRIPLE ECCENTRIC DISC VALVE, METAL SEATED SERIES BW

METSO NELES HIGH PERFORMANCE TRIPLE ECCENTRIC DISC VALVE, METAL SEATED SERIES BW METSO NELES HIGH PERFORMANCE TRIPLE ECCENTRIC DISC VALVE, METAL SEATED SERIES BW Neles BW series metal seated triple eccentric disc valve with one piece body design, for both control and tight shut-off

More information

NELES HIGH CAPACITY TRIPLE ECCENTRIC DISC VALVE, METAL SEATED NELDISC SERIES L6

NELES HIGH CAPACITY TRIPLE ECCENTRIC DISC VALVE, METAL SEATED NELDISC SERIES L6 NELES HIGH CAPACITY TRIPLE ECCENTRIC DISC ALE, METAL SEATED NELDISC SERIES L6 Metso's Neles series L6 is a double flanged metal seated Neldisc triple eccentric disc valve with one piece body design, for

More information

Spring Diaphragm Actuator Series VD Installation, Maintenance and Operating Instructions

Spring Diaphragm Actuator Series VD Installation, Maintenance and Operating Instructions Spring Diaphragm Actuator Series VD Installation, Maintenance and Operating Instructions 6 DA 70 en 2/2018 2 6 DA 70 en Table of Contents 1 GENERAL...3 1.1 Scope of the manual...3 1.2 Structure and operation...3

More information

INTRODUCTION BODY SUB-ASSEMBLY (FIGURE 1) 2 G X L GLOBE CONTROL VALVE VALTEK SULAMERICANA. Top entry assembly: quick and easy maintenance

INTRODUCTION BODY SUB-ASSEMBLY (FIGURE 1) 2 G X L GLOBE CONTROL VALVE VALTEK SULAMERICANA. Top entry assembly: quick and easy maintenance globe control valve INTRODUCTION The GXL globe control valve was developed as a simple, lightweight and more economical alternative to the renowned and advanced design of the Valtek Sulamericana GLS globe

More information

CONTROL VALVE STANDARD SPECIFICATION

CONTROL VALVE STANDARD SPECIFICATION CONTROL VALVE STANDARD SPECIFICATION ON-OFF 2,3-WAY GLOBE VALVE YAD-112Q1/11231 Series YAC-31231 Series YAC-31281 Series http://www.proval.co.kr [B-8] GENERAL The single soft seat control valves are designed

More information

Series 110 Globe Control Valves

Series 110 Globe Control Valves Series Control Valves Series Globe Control Valves This type of control valve with it s globe body shape, uses the variable area generated within the control valve trim to control fluid flow. Designed in

More information

Forbes Marshall Control Valve. Operational Economy with Optimum Control

Forbes Marshall Control Valve. Operational Economy with Optimum Control Forbes Marshall Control Valve Operational Economy with Optimum Control Forbes Marshall Control Valve The Forbes Marshall Control Valve provides excellent performance on steam, liquid and gas applications.

More information

21000 Series. Masoneilan * Valves. High-Performance Control Valves

21000 Series. Masoneilan * Valves. High-Performance Control Valves GE Energy Masoneilan * Valves 21000 Series High-Performance Control Valves Optimum control performance for a wide range of automated process control applications Single-ported design configuration Advanced

More information

FASANI PRESSURE SEAL CAST GLOBE VALVES - STYLE B Y AND T PATTERN

FASANI PRESSURE SEAL CAST GLOBE VALVES - STYLE B Y AND T PATTERN A wide range of globe valves specifically designed for high pressure and high temperature applications, where low pressure loss is required. FEATURES GENERAL APPLICATION Our pressure seal globe valves

More information

SERIES VARISTEP CONTROL VALVES

SERIES VARISTEP CONTROL VALVES 1-6962 SERIES VARISTEP CONTROL VALVES Introduction Cavitation is a well-known phenomenon which frequently occurs when high liquid pressure drops associated with relatively high temperatures are handled

More information

KOSO HAMMEL DAHL. Specifications. Body Size: Globe - 1/2" through 6" ( mm). Angle - 1/2" through 2" (15-50 mm).

KOSO HAMMEL DAHL. Specifications. Body Size: Globe - 1/2 through 6 ( mm). Angle - 1/2 through 2 (15-50 mm). control valves KOSO HAMMEL DAHL B U L L E T I N G 1 3 0-1 FEATURES Cage-retained quick change seat ring simplifies maintenance. Metal seats for a variety of services and ANSI IV and V shutoff. Soft seat

More information

Masoneilan * Series

Masoneilan * Series GE Oil & Gas Technical Specifications 05/2013 Masoneilan * 80000 Series Three-Way Control Valves Combining and Diverting Service 2 GE Oil & Gas Table of Contents Features...3 Numbering System...4 Ratings/Connections...4

More information

NELES R-SERIES SEGMENT VALVE WAFER R1 AND FLANGED R21

NELES R-SERIES SEGMENT VALVE WAFER R1 AND FLANGED R21 NELES R-SERIES SEGMENT VALVE WAFER R1 AND FLANGED R21 Neles R-Series rotary control valve is a segment ball valve that provides outstanding control performance in a quarter-turn valve design. It is offered

More information

Globe & Angle Control Valves 7000 SERIES / 8000 SERIES UNIFLO

Globe & Angle Control Valves 7000 SERIES / 8000 SERIES UNIFLO Globe & Angle Control Valves 7000 SERIES / 8000 SERIES UNIFLO R Control Valve This versatile design can be used for compressible and non-compressible fluid service application in valve sizes ranging from

More information

28000 Series Varipak Control Valves

28000 Series Varipak Control Valves GE Oil & Gas Technical Specifications 10/2012 Masoneilan * Valves 28000 Series Varipak Control Valves Precise Microflow Valves with Compact Design and Flexible Capabilities Table of Contents Numbering

More information

CE43 1" (DN25) to 4" (DN100) Carbon Steel Cage Design, Two Port Control Valves

CE43 1 (DN25) to 4 (DN100) Carbon Steel Cage Design, Two Port Control Valves Globe 13 CE43 1" (DN25) to 4" (DN) Carbon Steel Cage Design, Two Port Description The CE43 series is a range of carbon steel two port, cage trim, control valves conforming to ANSI B16.34, ASME VIII standards

More information

TECHNICAL BULLETIN. Valtek Multi-Z Anti-Cavitation Control Valve. Experience In Motion. Valtek Series Multi-Z FCD VLENTB /10

TECHNICAL BULLETIN. Valtek Multi-Z Anti-Cavitation Control Valve. Experience In Motion. Valtek Series Multi-Z FCD VLENTB /10 TECHNICAL BULLETIN Valtek Multi-Z Anti-Cavitation Control Valve FCD VLENTB1631-00 06/10 Experience In Motion 1 Index Section Features... 2 Specifications... 3 Principal design... 4 Principle of cavitation

More information

41005 Series. Masoneilan * Valves. Heavy Duty, Globe-Style Control Valves

41005 Series. Masoneilan * Valves. Heavy Duty, Globe-Style Control Valves GE Energy Masoneilan * Valves 41005 Series Heavy Duty, Globe-Style Control Valves Dependable globe-style control valve solutions for maximum performance in severe service conditions 41005 Series Cage-Guided

More information

Control Valves for General Applications

Control Valves for General Applications Control Valves for General Applications 2 CCI s 8G/8H delivers superior control performance and reliability. The series 8 cage-guided valve is specially designed using recent advancements in control valve

More information

NELES FLANGED FULL BORE MBV BALL VALVE, SERIES M1 FOR PN RATINGS

NELES FLANGED FULL BORE MBV BALL VALVE, SERIES M1 FOR PN RATINGS NELES FLANGED FULL BORE BV BALL VALVE, SERIES 1 FOR PN RAINGS etso's Neles modular ball valve series 1, offers optimized performance of pulp and paper applications. Series, incorporates etso's leading

More information

Masoneilan * Series

Masoneilan * Series Masoneilan * 41005 Series Heavy Duty, Globe-Style Control Valves Dependable globe-style control valve solutions for maximum performance in severe service conditions bhge.com 41005 Series Cage-Guided Globe

More information

Masoneilan* Series Double Ported Globe Valve

Masoneilan* Series Double Ported Globe Valve GE Oil & Gas Technical Specifications Rev.B - 0/2017 Masoneilan* 10000 Series Double Ported Globe Valve GE Data Classification : Public Table of Contents Numbering System...2 General Data...2 Temperature

More information

The bolted bonnet configuration achieves simultaneously the best performance and the highest safety.

The bolted bonnet configuration achieves simultaneously the best performance and the highest safety. The achieves simultaneously the best performance and the highest safety. Features A rugged body and bonnet design in accordance with API 600, ASME B16.34 and BS 1414. Tight shutoff performance is always

More information

LTG3 Globe Control Valves Standard Trim

LTG3 Globe Control Valves Standard Trim A Long Experience in Energy Equipment and one Goal: The Customer s Satisfaction. LTG3 Globe Control Valves Standard Trim Doc. num. G03STT rev.1 TABLE OF CONTENTS LTG3 - LTG3 LN - LTG3 DS : GENERAL FEATURES...

More information

Baumann 24000CVF Carbon & 24000SVF Stainless Steel Flanged Control Valves

Baumann 24000CVF Carbon & 24000SVF Stainless Steel Flanged Control Valves 24000CVF and 24000SVF Valves Product Bulletin Baumann 24000CVF Carbon & 24000SVF Stainless Steel Flanged Control Valves The Baumann 24000CVF and 24000SVF line of control valves can be utilized for the

More information

10000 Series Control Valves

10000 Series Control Valves GE Energy Technical Specifications 07/2012 Masoneilan * Valves 000 Series Control Valves ouble Ported Globe Valves Table of Contents Numbering System...2 General ata...2 Temperature Range / Seat Leakage...3

More information

Masoneilan * Series Three-Way Control Valves Combining and Diverting Service

Masoneilan * Series Three-Way Control Valves Combining and Diverting Service Technical Specifications Rev.C - 08/2017 Masoneilan * 80000 Series Three-Way Control Valves Combining and Diverting Service BHGE Data Classification : Public Contents Features 3 Numbering System 4 Ratings/Connections

More information

Fisher YD and YS Control Valves

Fisher YD and YS Control Valves Product Bulletin D100031X012 Fisher YD and YS Control Valves Fisher YD (figure 1) and YS three-way cage-guided valves are designed for throttling or flow-switching (on-off) service, and are available in

More information

EMISSION-PAK SERIES 7000 AND 9000 BALL VALVES

EMISSION-PAK SERIES 7000 AND 9000 BALL VALVES EMISSION-PAK SERIES 7000 AND 9000 BALL VALVES The Emission-Pak provides a simple and economical method to meet emissions standards. It is supplied as a factory mounted valve assembly. The Emission-Pak

More information

FLANGED FULL BORE BALL VALVE, SERIES MBV, ANSI CLASS 600 VERSION

FLANGED FULL BORE BALL VALVE, SERIES MBV, ANSI CLASS 600 VERSION FLANGED FULL BORE BALL VALVE, SERIES MBV, ANSI CLASS 6 VERSION 1 MBV 27 Issue 12/98 Applications Chemical and petrochemical plants. Oil and gas production. Hydrocarbons. Liquids. Water. Power plants. Suitable

More information

GLOBE 2 WAY CONTROL VALVE SERIES - 110

GLOBE 2 WAY CONTROL VALVE SERIES - 110 ACAD/PVCT/PVCT - 1 GLOBE WAY CONTROL VALVE SERIES - 1 INTRODUCTION This type of Valve with its classic globe body shape, which reflects its name, uses the variable area generated between the plug and seat

More information

Fisher HP Series Control Valves

Fisher HP Series Control Valves Product Bulletin D0635X0 Fisher HP Series Control s HP (Globe ) HPA (Angle ) Balanced High-Temperature Trim Balanced Tight Shutoff Trim Unbalanced Trim Fisher HP Series control valves (figure ) are single-port,

More information

Fisher CV500 Rotary Globe Control Valve

Fisher CV500 Rotary Globe Control Valve CV500 Valve D101606012 Product Bulletin Fisher CV500 Rotary Globe Control Valve The Fisher CV500 Cam Vee-Ball control valve combines the rangeability of the cammed-segmented V-notched ball, with the inherent

More information

TABLE OF CONTENTS INDRODUCTION

TABLE OF CONTENTS INDRODUCTION TABLE OF CONTENTS Model Numbering System ---------------------------------------------------------------------------------------------------------- Available Sizes and Ratings -------------------------------------------------------------------------------------------------------

More information

Fisher ES and EAS Sliding-Stem Control Valves

Fisher ES and EAS Sliding-Stem Control Valves Fisher ES and EAS Sliding-Stem Control Valves Fisher ES and EAS general-purpose control valves (figures and ) are used for throttling or on-off control of a wide variety of liquids and gases. Both valve

More information

SPIRA-TROL Two-port Control Valves ASME Standard KEA, KFA and KLA ½" to 8"

SPIRA-TROL Two-port Control Valves ASME Standard KEA, KFA and KLA ½ to 8 SPIRA-TROL Two-port Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME standard. These valves are available in three body materials in sizes

More information

3Z Rising Stem Ball Valves

3Z Rising Stem Ball Valves 3Z Rising Stem Ball Valves 1 Plant - 3Z Manufacturing & Assembly 254, Sihwa Venture-Ro, Siheung-City, Gyeonggi-Do, Korea 2 Plant - 3Z Foundry 117, Hwanggeum 2-ro, Yangchon-eup Gimpo-city in Gyeonggi-Do,

More information

D1 Series Top Guided Single Seated Control Valves

D1 Series Top Guided Single Seated Control Valves D1 Series Top Guided Single Seated Control Valves Model D1S Overview Model D1S globe control valves are with bolted bonnet and top guided contoured trims. The design facilitates easy access to internal

More information

Series 07 Single/Double Seated Globe Valves for ANSI (PN20-100) DIN/BS 4504 PN10-PN100

Series 07 Single/Double Seated Globe Valves for ANSI (PN20-100) DIN/BS 4504 PN10-PN100 Technical Bulletin B-070 Series 07 Single/Double Seated Globe Valves for ANSI 150 600 (PN20-100) DIN/BS 4504 PN10-PN100 Series 07 Features General The Series 07 control valves has been developed to provide

More information

NELES RA SERIES V-PORT SEGMENT VALVE

NELES RA SERIES V-PORT SEGMENT VALVE NELES R SERIES V-PORT SEGMENT VLVE Metso's Neles V-port valve in the R-series is primarily intended as a control valve, but it can also be used for shut-off service. The R-series V-port segment valve is

More information

Mark 70 Series. Sliding Gate Control Valves. Pneumatic Control Valves Mark 70 Sliding Gate Control Valves MARK 70 FEATURES

Mark 70 Series. Sliding Gate Control Valves. Pneumatic Control Valves Mark 70 Sliding Gate Control Valves MARK 70 FEATURES Mark 7 Series Sliding Gate Control Valves The MK7 Series is a line of pneumatically-operated diaphragm control valves that combine multiple spring actuators with the precision of Jordan Valve s advanced

More information

KOMOTO VALVES & CONTROLS PRODUCT GUIDE KOREA MOTOYAMA INC.

KOMOTO VALVES & CONTROLS PRODUCT GUIDE KOREA MOTOYAMA INC. KOMOTO VALVES & CONTROLS PRODUCT GUIDE KOREA MOTOYAMA INC. Safe & Reliable Operation, Perfect Performance, Professional Technical Support, Easy Maintenance, Interchangeable Parts, Long Life Korea Motoyama

More information

SPIRA-TROL 1/2" to 4" ANSI Two-port LEA, LFA and LLA Control Valves

SPIRA-TROL 1/2 to 4 ANSI Two-port LEA, LFA and LLA Control Valves 1/2" to 4" ANSI Two-port LEA, LFA and LLA Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME/ANSI standards. These valves are available in

More information

Fisher CV500 Rotary Control Valve

Fisher CV500 Rotary Control Valve Product Bulletin D101606012 Fisher CV500 Rotary Control Valve CV500 Valve The Fisher CV500 Cam Vee Ball control valve combines the rangeability of the cammed-segmented V-notched ball, with the inherent

More information

High Performance Butterfly Valves

High Performance Butterfly Valves Tech Bulletin Page 500-11 MAX SEAL HP SERIES High Performance Butterfly Valves Available with Soft and Metal Seating MODEL BL630 Size Range 2 thru 24, optional thru 120 ANSI Class 150//600/900 20 Lug 6

More information

Series 2003 / Three-way control valve. Features. Wörth am Main

Series 2003 / Three-way control valve. Features. Wörth am Main Series 2003 / 2013 Three-way control valve SPECIFICATION The Series 2003 / 2013 comprises a range of skirt guided Three-way mixing (2003) and diverting valves (2013). Available in a variety of sizes, they

More information

Fisher YD and YS Control Valves

Fisher YD and YS Control Valves YD and YS Valves Product Bulletin Fisher YD and YS Control Valves Fisher YD and YS three-way cage-guided valves are designed for throttling or flow-switching (on-off) service, and are available in the

More information

GLS. globe control valve

GLS. globe control valve globe control valve GLS INTRODUCTION The GL S globe control valve presents a superior performance, while providing an easy, quick and economical maintenance. Differently from other control valves operated

More information

PARCOL SERIES CONTROL VALVES

PARCOL SERIES CONTROL VALVES PAROL -9 SERIES ONTROL VALVES PAROL -9 SERIES ONTROL VALVES The line of PAROL -9 series control valves provides the most versatile globe body type single seat available with heavy top guiding design.

More information

CAST STEEL FLANGED GATE, GLOBE, & CHECK VALVES.

CAST STEEL FLANGED GATE, GLOBE, & CHECK VALVES. CAST STEEL FLANGED GATE, GLOBE, & CHECK VALVES www.fnw.com Index Options & Accessories... 2 Standards... 2 Figure Number Matrix... 3 Pressure/Temperature Ratings... 3 Hydrostatic Test Pressures... 3 Carbon

More information

Gate Valve (Model 1000)

Gate Valve (Model 1000) Gate Valve (Model 1000) s: - 2 to 24 (50mm to 600mm) Rating: - Class 150 to Class 2500 Cast Steel Valves Flange End But-Weld End Information:- www.invacovalves.com sandesh@invacovalves.com invacovalves@gmail.com

More information

TRUNNION BALL VALVES. TBV 7.10

TRUNNION BALL VALVES.     TBV 7.10 TRUNNION BALL VALVES WWW.VALVE.COM TBV 7.10 ABOUT US Our mission at Universal Flow (), is to provide a quality product at a competitive price and to meet the needs and requirements of our customers in

More information

Design ET, EAT, and ETR Sliding-Stem Control Valves

Design ET, EAT, and ETR Sliding-Stem Control Valves Product Bulletin Design ET, EAT, and ETR Sliding-Stem Control Valves ET Valve Design ET, EAT, and ETR general-purpose control valves (figures 1,,, and ) are used for throttling or on-off control of a wide

More information

Single Seated Globe Control Valves

Single Seated Globe Control Valves Product 1: Top Guided Single Seated Control Valves Type: Globe Size: 1-1/2'', 2'', 2-1/2'', 3'', 4'', 6''and 8 (DN40 DN200) Pressure Rating: ANSI 125 ~ ANSI 600 (PN16~PN64, JIS10K~JIS40K) Body Material:

More information

SPIRA-TROL 1/2" to 4" ANSI Two-port KEA, KFA and KLA Control Valves

SPIRA-TROL 1/2 to 4 ANSI Two-port KEA, KFA and KLA Control Valves 1/2" to 4" ANSI Two-port KEA, KFA and KLA Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME/ANSI standards. These valves are available in

More information

GVER04 GLOBE VALVE. Fundamental Of Engineering Data. Fundamental Of Engineering Data 14.04

GVER04 GLOBE VALVE. Fundamental Of Engineering Data. Fundamental Of Engineering Data 14.04 GVER04 14.04 GLOBE VALVE Fundamental Of Engineering Data Fundamental Of Engineering Data INDEX 03 04 05 06 07 PRODUT FEATURES MODEL SELECTION GUIDE GLOBE VALVE ASSEMBLY DIMENSION KS/JIS 10K RF, ANSI CL

More information

EXPG SBG API 6D EXPANDING/ SLAB GATE VALVES SERIES DEPEND ON US. WE CAN HANDLE THE PRESSURE.

EXPG SBG API 6D EXPANDING/ SLAB GATE VALVES SERIES DEPEND ON US. WE CAN HANDLE THE PRESSURE. API 6D Expanding/ Slab Gate Valves ANSI 150-300-600-900-1500 SERIES 2-36 EXPG SBG > Control > Flow Quality > lit API 6D EXPANDING/ SLAB GATE VALVES Providing Hundreds of Products. Supporting Thousands

More information

Specification Data CH /10. Putting You In Control Series. Double Ported Globe Valves

Specification Data CH /10. Putting You In Control Series. Double Ported Globe Valves Putting You In Control Specification ata CH000 11/ 000 Series ouble Ported Globe Valves resser Masoneilan 000 Series ouble Ported Globe Valves 2 resser Masoneilan Table of Contents Features...1 Numbering

More information

The series 10 butterfly valves has been developed for a large number of applications throughout process industries. The

The series 10 butterfly valves has been developed for a large number of applications throughout process industries. The Technical Bulletin B-100 Features Series 10 High Performance Feature Butterfly valves For Rating ANSI 150 General : The series 10 butterfly valves has been developed for a large number of applications

More information

Series 2700A, 2700E and 2720 Control Valves

Series 2700A, 2700E and 2720 Control Valves Series 2700A, 2700E and 2720 Control Valves Flexible Designs: Configurations, trims and actuators to suit your application Series 2700A Series 2720 The Series 2700 family of control valves offers the flexibility

More information

V1C Series. Pneumatic Control Valves V1C Series Cage-Guided Control Valves. Cage-Guided Control Valve. Features

V1C Series. Pneumatic Control Valves V1C Series Cage-Guided Control Valves. Cage-Guided Control Valve. Features V1C Series Cage-Guided Control Valve The V1C cage-guided balanced trim control valve offers high pressures and tight shutoff with the use of standard spring/diaphragm actuators. The balanced cage trim

More information

Steam reforming. The product is then ready to be used in refinery applications or for synthesis of ammonia or methanol. APPLICATION REPORT CLOSEOPEN

Steam reforming. The product is then ready to be used in refinery applications or for synthesis of ammonia or methanol. APPLICATION REPORT CLOSEOPEN APPLICATION REPORT Steam reforming Burner ESD valve Fuel gas/oil control valve Process air Process air inlet valve Shift converter pass valves Fuel Feed inlet valves Feed Secondary reformer High temperature

More information

Fisher EU and EW Valves NPS 12 through 24 x 20

Fisher EU and EW Valves NPS 12 through 24 x 20 Product Bulletin D102004X012 Fisher EU and EW Valves NPS 12 through 24 x 20 EU Valve The Fisher NPS 12 through 24 20 CL150 through CL600 EUT-2, EWT-2, EUD, EWD, EUT, and EWT general-purpose valves (figures

More information

KP-28 & KT-28 Two Way Control Valve Technical Manual

KP-28 & KT-28 Two Way Control Valve Technical Manual KP-28 & KT-28 Two Way Control Valve Technical Manual Features 1. Modulating and open/close functions with electric or pneumatic actuators and others for selection. 2. Compact design and trim structure

More information