Hole-cutting. cutting a hole. After the hole has been cut all rough edges must be removed and the area within 5/8 (16mm) of the hole

Size: px
Start display at page:

Download "Hole-cutting. cutting a hole. After the hole has been cut all rough edges must be removed and the area within 5/8 (16mm) of the hole"

Transcription

1 Mechanical Tees Hole-cutting Shurjoint mechanical tees provide a fast and easy mid-point branch outlet, eliminating the need for welding or the use of multiple fittings. The Model M21 features a female threaded outlet and M22 features a grooved end outlet. Model 7721 (female threaded outlet) and 7722 (grooved end outlet) are available in 8 sizes. The Model 723 Saddlelet features a compact-design for making direct connections to sprinkler heads, drop nipples and or gauges. The hole-cut method of pipe preparation is required when using mechanical tees, mechanical crosses, and saddle-lets. The method of pipe preparation requires the cutting or drilling of a specified hole size on the centerline of the pipe. Always use the correct hole saw size as shown in Table 1 A Ridgid Model No. HC-300 Hole Cutting Tool 16mm ( ⅝" ) and Table 1-b and never use a torch for cutting a hole. After the hole has been cut all rough edges must be removed and the area within 5/8 (16mm) of the hole Alignment Tab Bolt Pad Gasket Lower Housing Upper Housing Nut Bolt Locating Collar should be inspected to ensure a clean smooth surface, free of any indentations or projections that could affect proper gasket sealing. The area within the A dimension should also be inspected and must be free of dirt, scale or any imperfection that could affect proper seating or assembly of the fitting. Hole Size: The hole sizes are dictated by the branch size of the mechanical tee. When bolts are tightened with a proper torque, the outlet housing makes metal to metal contact with the outer surface of the pipe. Metal-to-metal Gap It is normal to see bolt pad gaps Table 1 Hole Sizes for Mechanical Tees unit: mm/in Branch Hole Dimensions Surface Size Hole Saw Max dia. Preparation Size Allowed A 15, 20, ½, ¾, 1 1½ 1⅝ 3½ 32, 40 51* 54* 102 1¼, 1½ 2 2⅛ ½ 2⅝ 4½ ½ 2¾ 2⅞ 4¾ ½ 3⅝ 5½ ½ 4⅝ 6½ *See Table 1-b for exception.` Table 1-b Exception The hole must be cleanly cut using the correct size hole-saw and shall have a smooth edge. Never use a torch for cutting a hole. Hole Dimensions Surface Run x Branch Hole Saw Max dia. Preparation Size Allowed A 50 x 32 / 50 x x1¼ / 2 x 1½ 1¾ 1⅞ 4 33

2 M21 MECHANICAL TEE FEMALE THREADED OUTLET Threads are NPT per ANSI B or BSPT per ISO 7. UL/FM working pressure is 20 bar (300 psi). The Model 7721 is available in 8" sizes. Pressure-Temperature Rating Working Pressure Max. Service Nom. Rating (STD, Roll-grooved) Temperature F EPDM: 230 F / 110 C Class C Nitrile: 180 F / 82 C *Working pressure is based on standard wall carbon steel pipe. *Proof test pressure: 1.5 times the working pressure, non-shock cold water. *Burst pressure is engineered minimum 3 times the working pressure. A B C T D Nominal Size Pipe Hole Dia. Dimensions Bolt Run x Branch O. D. +3.2, -0 / +0.13, -0 T* A B C D Size Weight mm / in mm / in mm / in mm / in mm / in mm / in mm / in mm / in mm / in Kgs / Lbs 50 x x M10 x x ½ x ⅜ x 2⅛ x x M10 x x ¾ x ⅜ x 2⅛ x x M10 x x x ⅜ x 2⅛ x x 42.2 [45] M10 x x 1¼ x [1.75] ⅜ x 2⅛ x x 48.3 [45] M10 x x 1½ x [1.75] ⅜ x 2⅛ x x M12 x x ½ x ½ x 2⅜ x x M12 x x ¾ x ½ x 2⅜ x x M12 x x x ½ x 2⅜ x x M12 x x 1¼ x ½ x 2⅜ x x M12 x x 1½ x ½ x 2⅜ x M12 x x x ½ x 2⅜ x M12 x x x /2 x 2-3/ x M12 x x x ½ x 2⅜ x M12 x x x ½ x 2⅜ x M12 x x x ½ x 2⅜ x x M12 x x ½ x ½ x x x M12 x x ¾ x ½ x x x M12 x x x ½ x x x M12 x x 1¼ x ½ x x x M12 x x 1½ x ½ x x x M12 x x x ½ x x x M12 x x ½ x ½ x x x M12 x x ¾ x ½ x x x M12 x x x ½ x x x M12 x x 1¼ x ½ x x x M12 x x 1½ x ½ x Hole diameters listed are suggested hole saw diameters. 2. *T: Take-out (Center of run to end of pipe to be engaged) 3. Special caution is required to some exceptional hole sizes shown in [ ]. Continued on next page 34

3 M21 & 7721 MECHANICAL TEES FEMALE THREADED OUTLET The Shurjoint Model M21 & 7721 mechanical tees provides a fast and easy mid-pipe threaded branch outlet. Threads are NPT per ANSI B or BSPT per ISO 7. UL/FM working pressure is 20 bar (300 psi). A B C T D Continued from previous page Nominal Size Pipe Hole Dia. Dimensions Bolt Run x Branch O. D. +3.2, -0 / +0.13, -0 T* A B C D Size Weight mm / in mm / in mm / in mm / in mm / in mm / in mm / in mm / in mm / in Kgs / Lbs 100 x x M12 x x x ½ x x x M12 x x 2½ x ½ x x M12 x x x ½ x x x M12 x x x ½ x x M16 x x x ⅝ x 3½ x M16 x x x ⅝ x 3½ x M16 x x x ⅝ x 3½ x x M16 x x x ⅝ x 3½ x x M16 x x 2½ x ⅝ x 3½ x x M16 x x x ⅝ x 3½ x M16 x x x ⅝ x 3½ x M16 x x x ⅝ x 3½ x M16 x x x ⅝ x 3½ x M16 x x x ⅝ x 3½ x M16 x x x ⅝ x 3½ x M16 x x x /8 x 3-1/ x M16 x x x ⅝ x 3½ x x M16 x x 1¼ x ⅝ x 3½ x x M16 x x 1½ x ⅝ x 3½ x x M16 x x x ⅝ x 3½ x x M16 x x 2½ x ⅝ x 3½ x M16 x x x ⅝ x 3½ x x M16 x x x ⅝ x 3½ x x M16 x x x ⅝ x 3½ Nominal Size Pipe Hole Dia. Dimensions Bolt Run x Branch O. D. +3.2, -0 / +0.13, -0 T* A B C D Size Weight mm / in mm / in mm / in mm / in mm / in mm / in mm / in mm / in mm / in Kgs / Lbs 200 x x 60.3 [70] M20 x x x [2.75] ¾ x 4¾ x x M20 x x x ¾ x 4¾ x x M20 x x x ¾ x 4¾ x x M20 x x x ¾ x 4¾ Hole diameters listed are suggested hole saw diameters. 2. *T: Take-out (Center of run to end of pipe to be engaged) 3. Special caution is required to some exceptional hole sizes shown in [ ]. 35

4 M22 MECHANICAL TEE GROOVED-END OUTLET The groove dimensions conform to AWWA C606. UL/FM working pressure is 20 bar (300 psi). The Model 7722 is available in 8" sizes. C D Pressure-Temperature Rating Working Pressure Max. Service Nom. Rating (STD, Roll-grooved) Temperature F EPDM: 230 F / 110 C Class C Nitrile: 180 F / 82 C *Working pressure is based on standard wall carbon steel pipe. *Proof test pressure: 1.5 times the working pressure, non-shock cold water. *Burst pressure is engineered minimum 3 times the working pressure. A B Nominal Size Pipe Hole Dia. Dimensions Bolt Run x Branch O. D. +3.2, -0 / +0.13, -0 A B C D Size Weight mm / in mm / in mm / in mm / in mm / in mm / in mm / in mm / in Kgs / Lbs 50 x x M10 x x x ⅜ x 2⅛ x x 42.2 [45] M10 x x 1¼ x [1.75] ⅜ x 2⅛ x x 48.3 [45] M10 x x 1½ x [1.75] ⅜ x 2⅛ x x M12 x ½ x x ⅜ x 2⅜ x x M12 x ½ x 1¼ x ⅜ x 2⅜ x x M12 x ½ x 1½ x ⅜ x 2⅜ x M12 x x x ½ x 2⅜ x M12 x x x ½ x 2⅜ x M12 x x x ½ x 2⅜ x x M12 x x x ½ x x x M12 x x 1¼ x ½ x x x M12 x x 1½ x ½ x x x M12 x x x ½ x x x M12 x x x ½ x x x M12 x x 1¼ x 1, ½ x x x M12 x x 1½ x ½ x x x M12 x x x ½ x x x M12 x x 2½ x ½ x x M12 x x x ½ x x x M12 x x x ½ x x M16 x x x ⅝ x 3½ x M16 x x x ⅝ x 3½ x M16 x x x ⅝ x 3½ x x M16 x x x ⅝ x 3½ x x M16 x x 2½ 5.563x ⅝ x 3½ x M16 x x x ⅝ x 3½ x x M16 x x x ⅝ x 3½ Hole diameters listed are suggested hole saw diameters. 2. Special caution is required to some exceptional hole sizes shown in [ ]. Continued on next page 36

5 M22 & 7722 MECHANICAL TEE GROOVED-END OUTLET The groove dimensions conform to AWWA C606. UL/FM working pressure is 20 bar (300 psi). The Model 7722 is available in 8" sizes. C D A B Continued from previous page (Model M22) Nominal Size Pipe Hole Dia. Dimensions Bolt Run x Branch O. D. +3.2, -0 / +0.13, -0 A B C D Size Weight mm / in mm / in mm / in mm / in mm / in mm / in mm / in mm / in Kgs / Lbs x M16 x x x ⅝ x 3½ x M16 x x x ⅝ x 3½ x M16 x x x ⅝ x 3½ x M16 x x x ⅝ x 3½ x M16 x x x ⅝ x 3½ x M16 x x x ⅝ x 3½ x x M16 x x 1¼ x /8 x 3½ x x M16 x x 1½ x ⅝ x 3½ x x M16 x x x ⅝ x 3½ x x M16 x x 2½ x ⅝ x 3½ x x M16 x x x ⅝ x 3½ x x M16 x x x ⅝ x 3½ Nominal Size Pipe Hole Dia. Dimensions Bolt Run x Branch O. D. +3.2, -0 / +0.13, -0 A B C D Size Weight mm / in mm / in mm / in mm / in mm / in mm / in mm / in mm / in Kgs / Lbs 200 x x 60.3 [70] M20 x x x [2.75] ¾ x 4¾ x x M20 x x 2½ x ¾ x 4¾ x M20 x x x ¾ x 4¾ x x M20 x x x ¾ x 4¾ x x M20 x x x ¾ x 4¾ Hole diameters listed are suggested hole saw diameters. 2. Special caution is required to some exceptional hole sizes shown in [ ]. 37

6 723 SADDLE-LET Small Mechanical Tee The Model 723 Saddle-Let is the ideal outlet fitting for making direct connections to sprinkler heads, drop nipples and or gauges. No need for welding, just cut or drill a hole at the desired outlet location. C B Pressure-Temperature Rating Working Pressure Max. Service Nom. Rating (STD, Roll-grooved) Temperature F EPDM: 230 F / 110 C Class C Nitrile: 180 F / 82 C *Working pressure is based on standard wall carbon steel pipe. *Proof test pressure: 1.5 times the working pressure, non-shock cold water. *Burst pressure is engineered minimum 3 times the working pressure. A T Nominal Hole Dia. Dimensions Take-Out, Bolt Bolt Size +1.6, -0 / , -0 A B C T Size Torque Weight mm / in mm / in mm / in mm / in mm / in mm / in in N-m / Lb-Ft Kgs / Lbs 32 x /8Ø ¼ x ½ U-Bolt x /8Ø ¼ x ¾ U-Bolt x /8Ø ¼ x U-Bolt x /8Ø ½ x ½ U-Bolt x /8Ø ½ x ¾ U-Bolt x /8Ø ½ x U-Bolt x /8Ø x ½ U-Bolt x /8Ø x ¾ U-Bolt x /8Ø x U-Bolt x /8Ø ½ x ½ U-Bolt x /8Ø ½ x ¾ U-Bolt x /8Ø ½ x U-Bolt Hole diameters listed are suggested hole saw diameters. 2. *T: Take-out (Center of run to end of pipe to be engaged) Hole Cutting The method of pipe preparation requires the cutting or drilling of a specified hole size on the centerline of the pipe. Always use the correct hole saw size as shown in the table and never use a torch for cutting a hole. After the hole has been cut all rough edges must be removed and the area within 5/8 (16mm) of the hole should be inspected to ensure a clean smooth surface, free of any indentations or projections that could affect proper gasket sealing. Hole Sizes for 723 Saddle-let unit: mm/in Hole Dimensions Surface Saddle- Let Hole Saw Max dia. Preparation Branch Size Size Allowed A 15, 20, ½, ¾, /16 1¼ 3½ 16mm ( ⅝" ) 38

7 Performance Data Sheet - Ductile Iron Couplings on Carbon Steel & Stainless Steel Pipe The following tables show maximum working pressures (CWP) of Shurjoint ductile iron couplings and flange adapters used on both carbon steel and stainless steel pipes. Shurjoint ductile iron unit: psi Model Z05 on Carbon Steel Pipe 1¼ ½ ½ couplings can be used in conjunction with stainless steel pipe in non-corrosive environment as the flow media does not come in direct contact with the coupling housings but rather only the gasket. unit: psi Model Z05 on Stainless Steel Pipe 1¼ ½ ½ NR NR NR Model Z07 on Carbon Steel Pipe 1¼ ½ ½ Model Z07 on Stainless Steel Pipe 1¼ ½ ½ NR NR NR NR NR Model XH-1000 on Carbon Steel Pipe NR 2½ NR NR NR NR NR NR NR Model 7705 on Carbon Steel Pipe ¼ ½ ½ Model 7707 on Carbon Steel Pipe ¾ ¼ ½ ½ Model XH-1000 on Stainless Steel Pipe NR 2½ NR NR NR NR NR NR NR Model 7705 on Stainless Steel Pipe ¼ ½ ½ NR NR NR NR NR NR NR Model 7707 on Stainless Steel Pipe ¾ ¼ ½ ½ NR NR NR NR NR 39

8 unit: psi Model M-7 on Carbon Steel Pipe ½ unit: psi Model M-7 on Stainless Steel Pipe ½ NR NR Model 7706 on Carbon Steel Pipe 1½ x 1¼ x '1½ ½ x x x '2½ x x '2½ x x x x x Model G28 on Carbon Steel Pipe 1½ NR NR 2½ NR NR NR NR NR NR NR NR Model 7706 on Stainless Steel Pipe 1½ x 1¼ x '1½ ½ x x x '2½ x x '2½ x x NR 6 x NR 6 x NR 8 x NR Model G28 on Stainless Steel Pipe '1½ NR NR NR NR NR NR NR NR NR NR NR NR NR Model C-7 on Carbon Steel Pipe 1½ x * x * ½ x * x * x * x * Model C-7 on Stainless Steel Pipe 1½ x * x * ½ x * x * x * x * * = all branch sizes, threaded and grooved.. * = all branch sizes, threaded and grooved.. Model 7041 on Carbon Steel Pipe NR 2½ NR NR NR NR NR NR NR NR NR NR NR NR NR Hydrostatic shell test: 450 psi (30 Bar) per ANSI B16.5 Model 7043 on Carbon Steel Pipe NR 2½ NR NR NR NR NR NR NR NR Hydrostatic shell test: 1125 psi (77 Bar) per ANSI B16.5 Model 7041 on Stainless Steel Pipe ½ NR NR NR NR NR NR NR NR NR NR NR NR NR NR NR NR Model 7043 on Stainless Steel Pipe NR NR 2½ NR NR NR NR NR NR NR NR NR NR NR NR NR NR NR NR 40

9 Section 2 Cast & Wrought Grooved Fittings Shurjoint Grooved Fittings Flow Data / Friction Resistance Ductile Iron Grooved Fittings 7110 / 7111 / 7112 / 7113 Elbows / 7135 / 7130 Tee, Cross, Lateral Reducing Tee / 7151 Concentric & Eccentric Reducers / 7160T / 7160H / 7160P Caps LR / 7111LR / 7137 / 7112G / 7110-B Elbows & True-Y / 903 / 7110DR / 7127 Elbows & Tee / 7150F / 7150M Bullhead Tee & Reducers / 55 / 56 End-All & Nipples / 851 / 853 Sprinkler Hubs / 7122 / 7133 Hydrant Elbow & Tees Wrought Grooved Fittings W110 / W110LR / W111LR / W120 / W160 / W121 Elbows & Tee..54 W150 / W151 / 57 / 58 / 59 Concentric & Eccentric Reducers, Nipples L90-3D / L60-3D / L45-3D / L30-3D / L22-3D / L11-3D Elbows L90-5D / L60-5D / L45-5D / L30-5D / L22-5D / L11-5D Elbows L90-6D / L60-6D / L45-6D / L30-6D / L22-6D / L11-6D Elbows Extra Heavy Grooved Fittings 10EP / 11EP / 20EP / 35EP / 22EP Elbows, Tees & Cross... 58

10 Shurjoint Grooved Fittings Shurjoint offers a wide range of grooved-end fittings in sizes through 24 (600mm). Fittings are available in a number of styles and configurations to support a variety of applications. Shurjoint grooved-end fittings are manufactured and designed to meet ASTM F1548 and ANSI/AWWA C606 requirements for use with grooved mechanical couplings conforming to ASTM F1476. For sizes not specified in these standards, please refer to applicable groove specifications shown in this catalog. Pressure-Temperature Rating Size Nom. Working Pressure Max. Service Rating (STD, Roll-grooved) Temperature F Class 300 (25 150).. 52 C EPDM: F 230 F / 110 C Class 250 ( ).. 28 C Nitrile: F 180 F / 82 C Class 150 ( ).. 20 C *Working pressure is based on roll- or cut-grooved standard wall carbon steel pipe. *Proof test pressure: 1.5 times the working pressure, non-shock cold water. *Burst pressure is engineered minimum 3 times the working pressure. Most fittings are provided in ductile iron conforming to ASTM A536 Gr and or ASTM A395 Gr Some styles and sizes larger than 14 (350mm) are fabricated from carbon steel pipe to ASTM A53 Gr. B or fabricated of segmentally welded steel of the same or equivalent grade. Fittings are painted orange or red, or as an option can be supplied hot-dip galvanized or epoxy coated. Rubber Lined Fittings Shurjoint ductile iron grooved end fittings are also available with rubber lining for abrasive services. Contact Shurjoint for further information. For abrasive services For abrasive and corrosive services Flow Data / Frictional Resistance Expressed as equivalent length of straight pipe Elbows Tees Nominal Pipe Pipe Wall # # #7110LR 90 # #7111LR 45 #7120 #903 Size O.D. Thickness Std. Radius Short. Radius 1½ D. LR Std. Radius 1½ D. LR Branch Branch mm / in mm / in mm / in meters / feet meters / feet meters / feet meters / feet meters / feet meters / feet meters / feet ¼ ½ ½ The values listed in this table express the frictional resistance of representative Shurjoint fittings as equivalent feet (meters) of straight pipe. For the branch of a tee that is reduced in size, use the value that corresponds to the branch size. For example, the branch value of a 4 x 4 x 3 tee is 12.8 feet (3.9 meters). For fittings not listed in this table, the equivalent length of straight pipe can be estimated from the data provided. For example, the flow resistance of a 22½ elbow is approximately one half that of a 45 elbow. 42

11 elbow elbow ½ elbow ¼ elbow Shurjoint ductile iron grooved-end fittings are made of ductile iron per ASTM A536 Gr and or ASTM A395 Gr dimensions are manufacturer s standard. See page 54 for wrought steel grooved-end fittings Elbow Elbow ½ Elbow ¼ Elbow Nominal Pipe # Elbow # Elbow # ½ Elbow # ¼ Elbow Size O. D. C - E Weight C - E Weight C - E Weight C - E Weight mm / in mm / in mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in Kgs / Lbs ¼ ½ ½ mm mm mm mm mm mm mm JIS JIS JIS

12 7120 tee 7135 cross lateral Shurjoint ductile iron grooved-end fittings are made of ductile iron per ASTM A536 Gr and or ASTM A395 Gr dimensions are manufacturer s standard. See page 54 for wrought steel grooved-end fittings. C-LE C-SE C-LE 7120 Tee 7135 Cross Lateral Nominal Pipe #7120 Tee #7135 Cross # Lateral Size O. D. C - E Weight C - E Weight C - LE C - SE Weight mm / in mm / in mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in mm / in Kgs / Lbs ¼ ½ ½ mm mm mm mm mm JIS JIS JIS

13 7121 reducing tee Shurjoint ductile iron grooved-end fittings are made of ductile iron per ASTM A536 Gr and or ASTM A395 Gr dimensions are manufacturer s standard. See page 54 for wrought steel grooved-end fittings Reducing Tee 7121 Reducing Tee (Threaded) Nominal Pipe Standard Threaded Br. Size O. D. C - E C - E Weight mm / in mm / in mm / in mm / in Kgs / Lbs 50 x 50 x x 60.3 x x 2 x1½ x x x 65 x x 73.0 x ½ x 2½ x x x x 65 x x 76.1 x ½ x 2½ x 1½ x x x 65 x x 73.0 x ½ x2½ x x x x 65 x x 76.1 x ½ x 2½ x x x x 80 x x 88.9 x x 3 x x x x 80 x x 88.9 x x 3 x 1½ x x x 80 x x 88.9 x x 3 x x x x 80 x x 88.9 x x 3 x 2½ x x x 80 x x 88.9 x x 3 x 2½ x x x 100 x x x x 4 x x x x 100 x x x x 4 x x x x 100 x x x x 4 x 2½ x x x x x 100 x 76.1mm x x x 100 x x x x 4 x x x x 125 x x x x 5 x x x x 125 x x x x 5 x x x x 150 x x x x 6 x x x x 150 x x x x 6 x 2½ x x Nominal Pipe Standard Threaded Br. Size O. D. C - E C - E Weight mm / in mm / in mm / in mm / in Kgs / Lbs 150 x 150 x x x x 6 x x x x 150 x x x x 6 x x x x x x x x 6 x x x x x x165.1 x x x x x x x x 6 x x x x x x x x 6 x x x x 200 x x x x 8 x x x x 200 x x x x 8 x x x x 200 x x x x 8 x x x x 200 x x x x 8 x x x x 250 x x x x 10 x x x x 250 x x x x 10 x x x x 250 x x x x 10 x x x x 300 x x x x 12 x x x x 300 x x x x 12 x x x x 300 x x x x 12 x x x x 300 x x x x 12 x x x x 300 x x x x 12 x x x

14 7150 CONCENTRIC REDUCER 7151 ECCENTRIC REDUCER Shurjoint ductile iron grooved-end fittings are made of ductile iron per ASTM A536 Gr and or ASTM A395 Gr dimensions are manufacturer s standard. See page 55 for wrought steel grooved-end fittings. E-E 7150 Conc. Reducer E-E 7151 Ecc. Reducer Nominal Pipe #7150 Conc. Reducer #7151 Ecc. Reducer Size O. D. E - E Weight E - E Weight mm / in mm / in mm / in Kgs / Lbs mm / in Kgs / Lbs 32 x x ¼ x x x x ½ x x x x ½ x 1¼ x x x x x x x x 1¼ x x x x 1½ x x x ½ x x x mm x x x x x x x x x 1¼ x x x x 1½ x x x x x x x x x x x x 2½ x x x x x x x x 2½ x x x 76.1mm x x x x x x x x x x x x x x x x 2½ x x x x x x x x x x x x x x mm x x mm x x 76.1mm x Nominal Pipe #7150 Conc. Reducer #7151 Ecc. Reducer Size O. D. E - E Weight E - E Weight mm / in mm / in mm / in Kgs / Lbs mm / in Kgs / Lbs 200 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

15 7160 END CAP 7160T TRANSITION CAP 7160H domed end CAP Shurjoint Model 7160T is an ideal transition fitting when a large reduction is required and can be used in place of more costly reducers or swaged nipples. In addition the 7160T can serve as a drain fitting. Shurjoint 7160H end caps are cast of ductile iron and are designed to withstand pressure evenly over the entire spherical surface. The Model 7160H End Cap is designed for use on mechanical piping applications. E-E 1 ~ 12 Nominal Pipe #7160 End Cap Size O.D. E - E Weight mm / in mm / in mm / in Kgs / Lbs ¼ ½ ½ mm mm mm mm mm mm JIS JIS JIS SW: segment-welded steel. L 7160T Nominal Size Grooved x Threaded L Weight mm / in mm / in Kgs / Lbs 50 x x x x 1¼ x ½ x x ½ x 1¼ x ½ x 1½ x x x x 1¼ x x 1½ x x x x x x 1¼ x x 1½ x x x x x x 1¼ x x 1½ x x E-E 10 ~ 24 Nominal Pipe #7160H Domed End Cap Size O.D. E - E Weight mm / in mm / in mm / in Kgs / Lbs P END CAP w/plug Nominal Pipe 7160P Size O.D. Plug Size mm / in mm / in mm / in ½ ½ ½ mm ½ Nominal Pipe 7160P Size O.D. Plug Size mm / in mm / in mm / in mm mm ½ ½ ½ 47

16 S 7110LR 1.5D 90 elbow 7111LR 1.5D 45 elbow 7137 TRUE-Y 7110LR LR 90 Elbow, 1.5D 7111LR LR 45 Elbow, 1.5D C-LE 7137 True-Y C-SE Nominal Pipe #7110LR 1.5D LR 90 Elbow #7111LR 1.5D LR 45 Elbow #7137 TRUE-Y Size O. D. C - E C - E C - LE C - SE mm / in mm / in mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in mm / in Kgs / Lbs ½ mm mm mm S 7112G Goose Neck 22-½ Elbow 7110-B 90 ELBOW With Base Support Two model 7112G elbows in combination with a coupling will serve as a universal joint and is ideal for instances where a pipe line is in need of a slight adjustment during make-up. The Model 7110-B is a ductile iron 90 grooved-end elbow with base support, designed for installation at the bottom of a riser system. An anchor can be placed in conjunction with the base to support the weight of the pipe, coupling and fluid. E-E U H Nominal Pipe 7112G 22½ Elbows Size O.D. E - E Weight mm / in mm / in mm / in Kgs / Lbs G 0.6 1½ G G 1.0 2½ G G G G G G JIS T S M Nominal Pipe Dimensions Size O. D. C - E H u T S M Weight mm / in mm / in mm / in mm / in mm / in mm / in mm / in mm / in Kgs / Lbs

Section 2. Shurjoint Grooved Fittings Flow Data / Friction Resistance Ductile Iron Grooved Fittings. Wrought Grooved Fittings

Section 2. Shurjoint Grooved Fittings Flow Data / Friction Resistance Ductile Iron Grooved Fittings. Wrought Grooved Fittings Section 2 Cast & Wrought Grooved Fittings Shurjoint Grooved Fittings... 56 Flow Data / Friction Resistance... 56 Ductile Iron Grooved Fittings 7110 / 7111 / 7112 / 7113 Elbows... 57 7120 / 7135 / 7130

More information

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable

More information

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable

More information

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable

More information

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 48 /1200 in a variety of straight and reducing styles. Most standard fittings are cast of durable

More information

GRUVLOK FITTINGS FOR GROOVED-END PIPE

GRUVLOK FITTINGS FOR GROOVED-END PIPE GRUVLOK FITTINGS FOR GROOVED-END PIPE Gruvlok fittings are available through 24" nominal pipe size in a variety of styles. Use the Fitting Table to convert nominal pipe size to corresponding pipe These

More information

Model 7706 Reducing Coupling. Deg. Axial Displacement

Model 7706 Reducing Coupling. Deg. Axial Displacement MODEL 7706 REDUCING COUPLING The Model 7706 Reducing allows direct reduction on a piping run and eliminates the need for a concentric reducer and couplings. The specially designed rubber gasket prevents

More information

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS S VITAULI PUBLIATION 10.01 FOR DTAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable ductile

More information

Section 3. Stainless Steel Series. Shurjoint Stainless Steel Piping Series Grooved Mechanical Couplings. Cast Grooved Fittings.

Section 3. Stainless Steel Series. Shurjoint Stainless Steel Piping Series Grooved Mechanical Couplings. Cast Grooved Fittings. Section 3 Stainless Steel Series Shurjoint Stainless Steel Piping Series... 84 Grooved Mechanical ouplings SS-5 Rigid oupling... 85 SS-7 Rigid oupling... 86 SS-7X Rigid oupling... 87 SS-8 Flexible oupling...

More information

B U I L D I N G C O N N E C T I O N S T H AT L A S T

B U I L D I N G C O N N E C T I O N S T H AT L A S T B U I L D I N G C O N N E C T I O N S T H AT L A S T pipe to pipe and people to people. We pride ourselves in providing the finest-quality pipe products and services with integrity and dedication to superior

More information

STAINLESS STEEL SYSTEMS

STAINLESS STEEL SYSTEMS STAINLESS STEEL SYSTEMS 139 Systems Table of Contents Figure 472 Rigid Couplings Page 142 Figure 401 45 Elbows Page 149 Figure SS-7X Rigid Couplings (Large Diameter) Page 143 Figure 405 Flexible Couplings

More information

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS ARBON STL PIP - GROOVD FITTINGS Grooved nd Fittings S VITAULI PUBLIATION 10.01 FOR DTAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles.

More information

Couplings. Ductile Iron Housing Specifications. Coatings. Gasket Specifications. Bolt/Nut Specifications

Couplings. Ductile Iron Housing Specifications. Coatings. Gasket Specifications. Bolt/Nut Specifications Figure 71 Flange Adapters (ANSI Class 5/150) The Figure 71 Flange Adapter is capable of pressures up to 300 psi (20,7 bar) depending on pipe size and wall thickness. It provides a direct transition from

More information

Valves & Flow Control Components Valves & Flow Control Components

Valves & Flow Control Components Valves & Flow Control Components Section 4 Valves & Flow ontrol omponents Valves & Flow ontrol omponents... 106 SJ-200 Low-Profile utterfly Valve... 107 SJ-300N utterfly Valve... 108 SJ-300F utterfly Valve (for Fire Protection)... 110

More information

UNITED BRAND FITTINGS

UNITED BRAND FITTINGS FLANGE DETAILS Class 5 S ize O.D. B.C. T Bolt Hole Bolt Dia. & of Dia. Length Bolts 4.75 5/ 8 4 x 4 50 4 x 4 3 4 4 x 4 4 00 5/ 4 x 3 8 5.00 50 5/ 7/ 8 4 x 3 8 6.00 50 7/ 8 4 x 3 8 8 3.50.75 8 7/ 8 4 x

More information

UNITED BRAND FITTINGS

UNITED BRAND FITTINGS UNITED BRAND FITTINGS ANSI B. Class 5 ( ~ ) AWWA C Class 0 (3 ~ ) Our dedication to the mechanical piping industry has given us the opportunity to provide you with a quality comprehensive line of flanged

More information

Ford Fabricated Steel Products

Ford Fabricated Steel Products Ford Fabricated Steel Products Section N2 12/2000 The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487 Overseas

More information

Model C10 / C11 / C20 / C60 Grooved Fitting For Copper Tubing Nominal Pipe Pipe C10 90 o Elbow C11 45 o Elbow C20 Tee C60 Cap

Model C10 / C11 / C20 / C60 Grooved Fitting For Copper Tubing Nominal Pipe Pipe C10 90 o Elbow C11 45 o Elbow C20 Tee C60 Cap GROOVED FITTINGS FOR COPPER TUBING Shurjoint Grooved-end fittings are produced from bronze castings. Bronze castings are produced from lead-free alloy C89836* Bismuth copper alloy per ASTM B584. Materials

More information

Fire Protection Price List

Fire Protection Price List Piping. Systems. Solutions. Fire Protection Price List The Victaulic website is an information resource that can help you with your piping projects. Among the many resources available at the site: Fully

More information

030/TL 03/01 50M, Copyright 2001, Anvil International $3. 50

030/TL 03/01 50M, Copyright 2001, Anvil International $3. 50 030/TL 03/01 50M, Copyright 2001, Anvil International $3. 50 Pipe Fitter Handbook Another Anvil Advantage Mini-catalog Installation Procedures Technical Data Copyright 2001 by Anvil International, Inc.

More information

Copper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10)

Copper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10) Offshore OSNA -10 Copper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10) KME Germany GmbH & Co. KG Offshore OSNA -10 [GB] Content KME - The Company 1 The Material 2 Offshore Product Range 3 Pipes

More information

INTEGRATED PIPING SYSTEMS. Technical manual. Fire Protection

INTEGRATED PIPING SYSTEMS. Technical manual. Fire Protection INTEGRATED PIPING SYSTEMS Technical manual Fire Protection Disclaimer: This technical data is non-binding and may not reflect the guaranteed characteristics of the products, which are subject to change.

More information

The applicable material specifications for ductile iron and rubber gaskets apply:

The applicable material specifications for ductile iron and rubber gaskets apply: 72 COUPLINGS - Grinnell Copper Grooved System is designed for joining copper tube size components 2" to 8" (54,0mm to 206,4mm) type K, L, M and DWV. All couplings and fittings are rated for working pressures

More information

UNITED BRAND FITTINGS

UNITED BRAND FITTINGS NFF0711 UNITED DUCTILE IRON CLASS 0 FLANGED FITTINGS UNITED BRAND FITTINGS AWWA C1, ANSI A21. Our dedication to the mechanical piping industry has given us the opportunity to provide you with a quality

More information

' ' ' ' LISTED Elbows Tees Crosses Wyes Reducers Flanges Converters Gaskets Nuts&Bolts

' ' ' ' LISTED Elbows Tees Crosses Wyes Reducers Flanges Converters Gaskets Nuts&Bolts .., I.,.,... I I...... I I ',,,, ", Elbows Tees Crosses Wyes Reducers Flanges Converters Gaskets Nuts&Bolts ' ; i ',,.) I ' ' ' ' AWWA C Class 50 (3"' ANSI B. Class 5 ("' ANSI B. Class 50 (3"' c@us LISTED

More information

COOPLOK Grooved Submittal. Material Specifications

COOPLOK Grooved Submittal. Material Specifications SmithCooper International (SCI) COOPLOK Submittal Directions: Enter in the project information below; then print. Project /Job: Date: Engineer/rchitect: Contractor: ddress: Notes: Project Information System:

More information

Grinnell Grooved Fire Protection Products Grooved Fittings

Grinnell Grooved Fire Protection Products Grooved Fittings Technical Services: Tel: (800) 38-932 / Fax: (800) 79-5500 www.tyco-fire.com Grinnell Grooved Fire Protection Products Grooved Fittings General Description LPCB Vd S The grooved fittings provide an economical

More information

GROOVED FITTINGS FOR COPPER TUBING

GROOVED FITTINGS FOR COPPER TUBING GROOVED FITTINGS FOR COPPER TUBING Shurjoint Grooved-end fittings are produced from bronze castings. Bronze castings are produced from lead-free alloys C90500 and or C89836* Bismuth copper alloy per ASTM

More information

11.02 Mechanical-T Bolted Branch Outlets

11.02 Mechanical-T Bolted Branch Outlets STLES AND SEE ICTAULIC PUBLICATION 10.01 FOR DETAILS NIIPO ictaulic Mechanical-T Outlet provides a direct branch connection at any location a hole can be cut in pipe. The hole is cut oversize to receive

More information

Mechanical MATERIAL SPECIFICATIONS. Stainless Steel Housing Specifications. Gasket Specifications. Bolt / Nut Specifications

Mechanical MATERIAL SPECIFICATIONS. Stainless Steel Housing Specifications. Gasket Specifications. Bolt / Nut Specifications 82 COUPLINGS SYSTEM The Grinnell Stainless Steel System is designed for joining 2" to 12" (54,0mm to 206,4mm) stainless steel piping, schedules 5, 10, and 40. The Figure 472 coupling patented Universal

More information

Fire Protection Price List. Piping. Systems. Solutions A FP.

Fire Protection Price List. Piping. Systems. Solutions A FP. Piping. Systems. Solutions. Fire Protection Price List The Victaulic website is an information resource that can help you with your piping projects. Among the many resources available at the site: Fully

More information

Style Flange Adapter

Style Flange Adapter Style 007 -- Flange Adapter Style 007 -- Flange Adapter is used for connect switches where valves, equipments or pipes have a flange interface. It realizes the change between flange connection and grooved

More information

INTRODUCTION. General Notes

INTRODUCTION. General Notes INTRODUCTION Thank you for selecting a Shurjoint product. This manual covers the proper installation and assembly procedures for your product. To ensure the proper installation, assembly and performance

More information

Stainless Steel Pipe System. System No. Submitted By Spec Sect Para Location Date Approved Date TEMPERATURE ( F/ C)

Stainless Steel Pipe System. System No. Submitted By Spec Sect Para Location Date Approved Date TEMPERATURE ( F/ C) The Victaulic Vic-Press 304 System for joining approved Type 304/304L stainless steel pipe provides a fast, easy, clean, reliable means for joining 1/2"/15, 3/4"/20, 1"/25, 1 1/2"/40, and 2"/50 stainless

More information

GROOVED COUPLINGS - STANDARD FLEXIBLE Model 101

GROOVED COUPLINGS - STANDARD FLEXIBLE Model 101 GROOVED COUPLINGS - STANDARD FLEXIBLE Model 101 Available Sizes 1" through 12" (25 through ) Pipe Material Carbon steel, Schedule 10, Schedule 40. For use with alternative materials and wall thicknesses

More information

Product Submittals for Project

Product Submittals for Project Product Submittals for Project May 011-1 Couplings Figure 577 Light Weight Rigid Coupling For Fire Protection Pressure Rating and Listing / Approval information contact Tyco Fire Suppression & Building

More information

Steel Fabricated Coupling

Steel Fabricated Coupling Steel Fabricated Coupling Straight Connection IMPORTANT LINKS Click appropriate words to go to: Standard Limited Warranty Sales Terms & Conditions Freight Policy Returns Policy Corrosion & Product Selection

More information

SECTION 1 Grooved Fittings

SECTION 1 Grooved Fittings Anvil offers two different sets of stainless steel fittings. The Gruvlok Series Fittings have full flow designs formed from type 304SS pipe. The Schedule 10 fittings are fabricated from segmentally welded

More information

Mechanical Piping.

Mechanical Piping. Mechanical Piping www.anvilintl.com JULY 2016 For the most current product/pricing information on Anvil products, please visit our website at www.anvilintl.com BUILDING CNNECINS HA LAS For over 160 years,

More information

Grooved Piping System for Fire Protection Services

Grooved Piping System for Fire Protection Services Grooved Piping System for Fire Protection Services 1.01 General: A. Section Includes: 1. General 2. Materials: a. Pipe b. Victaulic Couplings c. Victaulic Fittings d. Hole and Branch Outlets e. Victaulic

More information

Water, Sewer & Drain Fittings

Water, Sewer & Drain Fittings Why Compact? Compact Joint are manufactured from a high strength, impact resistant ductile iron that offers a great margin of safety against service failures and provides vastly increased resistance to

More information

REQUEST PUBLICATION 18.11

REQUEST PUBLICATION 18.11 * SEE VICTALIC PBLICATION 10.01 FOR DETAILS The Victaulic Pressfit 316 System for joining approved Type 316/316L stainless steel pipe provides a fast, easy, clean, reliable means for joining ½"/15, ¾"/

More information

Advantages of Grooved Fittings

Advantages of Grooved Fittings Grooved Fittings Advantages of Grooved Fittings Comparative Advantages Allows angular deflection-misalignment Expansion, contraction or, no need for expansion joint Reclaimable, no need for union Allows

More information

MACRO HP. NEW SMALLER SIZES Macro HP is Now Available for 2-12 inch Pipe Sizes. patent number:

MACRO HP. NEW SMALLER SIZES Macro HP is Now Available for 2-12 inch Pipe Sizes. patent number: ACROMACROMACROMA MACRO HP ROMAC S SECOND GENERATION TWO-BOLT E X T E N D E D R A N G E C O U P L I N G NEW SMALLER SIZES Macro HP is Now Available for 2-12 inch Pipe Sizes patent number: 8448993 BMACROHP

More information

SJ-300N J-04. Model SJ-300N-L Butterfly Valve with Lever Handle

SJ-300N J-04. Model SJ-300N-L Butterfly Valve with Lever Handle SJ-300N J-04 MODEL SJ-300N BUTTERFLY VALVE The Model SJ-300N Butterfly Valve is a grooved-end tight shut-off valve designed, manufactured and tested to MSS SP-67. The valve can be shipped either with a

More information

LATEST ARRIVALS CATALOGUE STOCK

LATEST ARRIVALS CATALOGUE STOCK LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL

More information

Approved Branded Traceable Fire Protection & Waterworks Valves

Approved Branded Traceable Fire Protection & Waterworks Valves Approved Branded Traceable Fire Protection & Waterworks Valves (800) 766-0076 www.smithcooper.com Los Angeles, CA Atlanta, GA Vancouver, WA Chicago, IL AWWA C515 Compliant CONSIDER Your Options Tamper

More information

Ford Service Saddles and Tapping Sleeves

Ford Service Saddles and Tapping Sleeves DQS Inc. Section AA 09/2017 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001:2015 10004466 Ford Service Saddles and Tapping Sleeves Contents Recommended Product Application *Steel *C900/909*** Cast

More information

Grooved Piping System for Fire Protection Services

Grooved Piping System for Fire Protection Services Grooved Piping System for Fire Protection Services 1.01 General: A. Section Includes: 1. General 2. Materials: a. Pipe b. Victaulic Couplings c. Victaulic Fittings d. Hole and Branch Outlets e. Victaulic

More information

Size Inches UL ULC FM. Pipe Sch.

Size Inches UL ULC FM. Pipe Sch. IPS CARBON STEEL PIPE - FIRE PROTECTION PRODUCTS FireLock Rigid Coupling STYLE 005 WITH VIC-PLUS GASKET SYSTEM (NORTH AMERICA ONLY) FireLock Style 005 rigid coupling has a unique, patented angle-pad design

More information

Precision is Central.

Precision is Central. Precision is Central. As experts in pipe joining solutions, we know precision is vital to every fitting and how they are fused. We offer the most complete range of conventional fusion fittings, injection

More information

Series 77S-M1 ( 1 4" 3") Cast Iron Wye-pattern Strainers

Series 77S-M1 ( 1 4 3) Cast Iron Wye-pattern Strainers Series S-M1 ( 1 4" ") Cast Iron Wye-pattern Install strainers up stream of equipment that need protection from scale, rust, dirt, etc Pressure Rating: (non-shock) 250psi WSP (1.2 bar) @ 406 F (208 C),

More information

FIG Gruvlok Flange Adapter

FIG Gruvlok Flange Adapter FIG. 88 Gruvlok Adapter The Gruvlok Fig. 88 Adapter allows for direct connection of Class 125 or Class 150 flanged components to a grooved piping system. The Gruvlok Adapter provides an alternative method

More information

+GF+ CLASS 267. Factory Mutual Approved. HDPE Pipe & Pipe Fittings GEORG FISCHER PIPING SYSTEMS centralplastics.

+GF+ CLASS 267. Factory Mutual Approved. HDPE Pipe & Pipe Fittings GEORG FISCHER PIPING SYSTEMS centralplastics. Factory Mutual Approved CLASS 26 HDPE Pipe & Pipe Fittings CENTRAL PLASTICS 8.499.692 Table Of Contents 18-1 Design-Flow HDPE IPS HDPE Pipe (Iron Pipe ) 4-24 18-2 PE 368 HDPE Physical Properties - FM 18-3

More information

Section N. 09/2017 Web Revision 10/23/2017 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001: Ford Fabricated Steel Products

Section N. 09/2017 Web Revision 10/23/2017 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001: Ford Fabricated Steel Products DQS Inc. THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001:2015 10004466 Section N 09/2017 Web Revision 10/23/2017 Ford Fabricated Steel Products Contents Page Product Numbering System... 3 Information...............................................................

More information

SECTION COMMON WORK RESULTS FOR FIRE SUPPRESSION. A. Pipe, fittings, valves, and connections for sprinkler systems.

SECTION COMMON WORK RESULTS FOR FIRE SUPPRESSION. A. Pipe, fittings, valves, and connections for sprinkler systems. SECTION 210500 - COMMON WORK RESULTS FOR FIRE SUPPRESSION PART 1 GENERAL 1.1 SECTION INCLUDES A. Pipe, fittings, valves, and connections for sprinkler systems. 1.2 RELATED REQUIREMENTS A. Section 099000

More information

Grooved Fire Protection. Installation Handbook

Grooved Fire Protection. Installation Handbook Grooved Fire Protection Installation Handbook October 2016 Grooved Fire Protection Installation Handbook OCTOBER 2016 IH-1000FP Worldwide Contacts www.tyco-fire.com GLOBAL HEADQUARTERS 1400 Pennbrook

More information

INFACT CORPORATION WATERWORKS PRODUCTS FLEX ADAPTOR SPECIFICATION S TOLL FREE:

INFACT CORPORATION WATERWORKS PRODUCTS FLEX ADAPTOR SPECIFICATION S TOLL FREE: INFACT CORPORATION WATERWORKS PRODUCTS SPECIFICATION S TOLL FREE: 888-773-9130 email: info@infactcorp.com www.infactcorp.com ENGINEERING DATA / PRODUCT CHECKLIST EASY-TO-INSTALL SPACE-SAVING RESTRAINT

More information

Victaulic Standard Grooved and Advanced Grooved (AGS) Piping System for IPS Steel 2 (DN 50) through 60 (DN1500)

Victaulic Standard Grooved and Advanced Grooved (AGS) Piping System for IPS Steel 2 (DN 50) through 60 (DN1500) Victaulic Standard Grooved and Advanced Grooved (AGS) Piping System for IPS Steel 2 (DN 50) through 60 (DN1500) 1.01 General: A. Section Includes: 1. General 2. Materials: a. Pipe b. Victaulic Couplings

More information

CARBON STEEL PIPE - BUTTWELD

CARBON STEEL PIPE - BUTTWELD 010-1 CARBON STEEL PIPE - BUTTWELD WEIGHT BLACK GALVANIZED FUSION BOND SIZE LBS/FT T & C P.E. T & C P.E. 1/8" 0.24 8.00 6.09 16.40 14.28 1/4" 0.42 9.61 8.25 15.27 12.91 3/8" 0.57 10.98 9.52 16.91 14.39

More information

Bulletin BX-512H. Bell & Gossett. Series HSC-S Pumps Technical Bulletin. Bell & Gossett. Part of the. Equipment Selection Programs

Bulletin BX-512H. Bell & Gossett. Series HSC-S Pumps Technical Bulletin. Bell & Gossett. Part of the. Equipment Selection Programs Bulletin BX-1H Bell & Gossett Series HSC-S Pumps Technical Bulletin Part of the Bell & Gossett Equipment Selection Programs TABLE OF CONTENTS Useful Pump Formulas...............................................

More information

Mueller Super Centurion 250 Fire Hydrant

Mueller Super Centurion 250 Fire Hydrant Mueller Super Centurion 250 Fire Hydrant Designed for efficient flow and outstanding, long-term reliability Mueller Super Centurion 250 Fire Hydrant...250 psig rating, high flow, dependable performance,

More information

TECHNICAL DATA OBSOLETE

TECHNICAL DATA OBSOLETE August 31, 2006 Check Valve 815a 1. PRODUCT NAME Viking Easy Riser Swing Check Valve Model E-1: Available since 1992 Model F-1: Available since 1994 2. MANUFACTURER The Viking Corporation 210 N. Industrial

More information

516509_tabs 11/16/10 4:55 AM Page 1 FIRE HYDRANTS

516509_tabs 11/16/10 4:55 AM Page 1 FIRE HYDRANTS Date Printed: November 2010 FIRE HYDRANTS or Tyton (6"),6, or 8" A EDDY FIRE HYDRANTS PARTS LIST WORKING PRESSURE: 150 PSI Note: Discontinued For Reference Only 350 PSI Working Pressure

More information

FIRE PROTECTION PRODUCTS

FIRE PROTECTION PRODUCTS FIRE PROTECTION PRODUCTS Rev.0119 6 info@ayvaz.com www.ayvaz.com 1 FIRE PROTECTION PRODUCTS ANGULAR EXPANSION JOINTS GIMBAL TYPE SEISMIC EXPANSION JOINTS Bellow Material Stainless Steel AISI 321 (Opt.

More information

SJ-300N. Model SJ-300N-L Butterfly Valve with Lever Handle Max. Working Pressure (CWP)* PSI Bar Dimensions A B C D E in.

SJ-300N. Model SJ-300N-L Butterfly Valve with Lever Handle Max. Working Pressure (CWP)* PSI Bar Dimensions A B C D E in. SJ-N MODEL SJ-N BUTTERFLY VALVE The Model SJ-N Butterfly Valve is a grooved-end tight shut-off valve designed, manufactured and tested to MSS SP-67. The valve can be shipped either with a -position lever

More information

Copper-Nickel Seawater Piping Systems Offshore product range: Pipes, fittings and flanges of OSNA 10

Copper-Nickel Seawater Piping Systems Offshore product range: Pipes, fittings and flanges of OSNA 10 Copper-Nickel Seawater Piping Systems Offshore product range: Pipes, fittings and flanges of OSNA 10 KME Germany AG & Co. KG OSNA 10 [GB] Member of the KME Group Contents Your Partner KME The Material

More information

PRODUCT SPECIFICATION

PRODUCT SPECIFICATION PVC piping systems are ideally designed for use in agricultural irrigation including row crop, forage and nursery crop applications and work particularly well in drag, mechanical move and side-shift operations.

More information

FIG Gruvlok Flanges

FIG Gruvlok Flanges Gruvlok Flanges The Gruvlok Fig. 7012 Flange allows direct connection of Class 125 or Class 150 flanged components to a grooved piping system. The two interlocking halves of the 2" thru 12" sizes of the

More information

Direct Mount Packages

Direct Mount Packages 800.783.7836 Direct Mount Packages BEV9 Actuated package Size range: 1/ - Pressure rated for 1000 WOG 316 Stainless steel construction Live loaded stem seal design Full Port Threaded Ends (F) EZ99 Actuated

More information

Forged High Pressure Pipe Fittings

Forged High Pressure Pipe Fittings Forged High Pressure Pipe Fittings Forged High Pressure Pipe Fittings Pressure Class Socket Weld Forged Fittings Products Dimension Specifications Pressure Class Threaded Forged Fittings Products Dimension

More information

TOTAL PIPING SOLUTIONS, INC. TRIPLE-TAP

TOTAL PIPING SOLUTIONS, INC. TRIPLE-TAP TOTAL PIPING SOLUTIONS, INC. TRIPLE-TAP Extended Range Stainless Steel Push Plug Line Stop Tapping Sleeve Technical Specifications Controlled Document: ENGTS-05/120417 December 2017 TRIPLE TAP Extended

More information

Series 756 FireLock Dry System Check Valve

Series 756 FireLock Dry System Check Valve R IPS CARBON STEEL PIPE FIRE PROTECTION PRODUCTS Series FireLock Dry System Check Valve Grooved X Grooved and Flanged X Grooved 0.0 VICTAULIC IS AN ISO 900 CERTIFIED COMPANY PRODUCT DESCRIPTION The Victaulic

More information

Ford Bolted Flex Couplings. Section M. 5/2008; Web Revision 10/2010

Ford Bolted Flex Couplings. Section M. 5/2008; Web Revision 10/2010 Section M 5/2008; Web Revision 10/2010 Ford Bolted Flex Couplings The Ford Meter Box Company, Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 260-563-3171 FAX: 800-826-3487

More information

INTEGRATED PIPING SYSTEMS. Technical manual. VSH Shurjoint

INTEGRATED PIPING SYSTEMS. Technical manual. VSH Shurjoint INTEGRATED PIPING SYSTEMS Technical manual VSH Shurjoint Disclaimer: The technical data are non-binding and do not reflect the warranted characteristics of the products. They are subject to change. Please

More information

TABLE OF CONTENTS. Pipe Diameter Chart (Reference Only)..50 Extensions 38,40,42,44

TABLE OF CONTENTS. Pipe Diameter Chart (Reference Only)..50 Extensions 38,40,42,44 TABLE OF CONTENTS Item Page Item Page ANSI/AWWA Compact & Full Body Pipe Fittings: Product Submittals and Installation: Mechanical & Flange Joint C153. 3-9 20U Protective Fusion Bonded Epoxy....5,5 Mechanical

More information

Butterfly Valve. Product Training Presentation Danfoss Flomatic Corporation

Butterfly Valve. Product Training Presentation Danfoss Flomatic Corporation Click to see: Butterfly Valves in our Online Catalog Butterfly Valve Product Training Presentation Danfoss Flomatic Corporation REV:082303 Butterfly Valve SYLAX SERIES 149G BUTTERFLY VALVES Wafer and Lug

More information

Plumbing. Controls, Drains, Piping, Flanges, Couplings, Caps and Plugs

Plumbing. Controls, Drains, Piping, Flanges, Couplings, Caps and Plugs Plumbing Hale offers a wide variety of plumbing components to make the pump installation and operation easier for the OEM and End User. Hale controls allow for a clean and compact pump panel. Controls

More information

Style 99 Roust-A-Bout Couplings

Style 99 Roust-A-Bout Couplings R IPS CARBON STEEL PIPE PLAIN END SYSTEM Style 99 Roust-A-Bout Couplings 14.02 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT DESCRIPTION 1 1 / 2-12" Sizes 14-18" Sizes Style 99 Roust-A-Bout couplings

More information

Utilities Catalog. PC-U2008, February, 2008

Utilities Catalog. PC-U2008, February, 2008 Utilities Catalog PC-U2008, February, 2008 Tyler Utilities 11910 CR. 492 Tyler, Texas 75706 (800) 527-8478 Union Foundry Company Box 309 Anniston, Alabama 3602 (800) 226-7601 TABLE OF CONTENTS Item Page

More information

STANDARD PIPE CLAMP FIG. 520 & 521

STANDARD PIPE CLAMP FIG. 520 & 521 Designed to be used in the suspension of non-insulated pipe lines. Normally used in conjunction with Fig. 35 weldless eye nut, Fig. 50 eye rod or Fig. 55 welded eye rod to allow flexibility at the rod

More information

Easy Riser swing check valve Models E-1 & F-1

Easy Riser swing check valve Models E-1 & F-1 Page 1 of 7 1. DESCRIPTION The Viking Easy Riser Swing Check Valve is a general purpose rubber-faced approved for use in fire service systems. The valve is for use in wet system risers, preaction system

More information

Series 758 FireLock Actuated System Valve

Series 758 FireLock Actuated System Valve R IPS CARBON STEEL PIPE FIRE PROTECTION PRODUCTS Series 58 FireLock Actuated System Valve With Deluge Trim Grooved X Grooved and Flanged X Grooved 30.04 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT

More information

Suggested Specifications

Suggested Specifications ISO 9001 Certified Suggested Specifications The Milliken criteria of quality, reliability, safety and value are embodied in the Millcentric Eccentric valve, setting higher standards for dependable performance

More information

SEE VICTAULIC PUBLICATION FOR DETAILS

SEE VICTAULIC PUBLICATION FOR DETAILS dapters SEE VICTULIC PULICTION 10.01 FOR DETILS Style 741 Style 741 adapter is designed for directly incorporating flanged components with NSI CL. 125 or CL. 150/PN10 and PN16 or ustralian Standard Table

More information

Section 8 AMERICAN. Flanged Pipe

Section 8 AMERICAN. Flanged Pipe Section 8 AMERICAN Flanged Pipe The principal standards covering Flanged Pipe are ANSI/AWWA C115/A21.15 and ANSI/AWWA C110/A21.10. These and other standards are referenced throughout this Section either

More information

IMPACT IMPEX PTFE, PFA, PVDF, PP LINED PIPE & FITTINGS. ANSI # 150.

IMPACT IMPEX PTFE, PFA, PVDF, PP LINED PIPE & FITTINGS. ANSI # 150. IMPACT IMPEX PTFE, PFA, PVDF, PP LINED PIPE & FITTINGS.. The information contained in this publication is intended as a guide to customers, and is freely given in good faith. Whilst every care has been

More information

Introduction. We stay ahead of today s evolving market requirements by committing to a program of continued research and development.

Introduction. We stay ahead of today s evolving market requirements by committing to a program of continued research and development. Pipes & Fittings SHIELD Introduction SHIELD is a company created to cater to the infrastructure, fire protection and building services industries with a comprehensive range of products designed to be competitive

More information

Section 1. Grooved Mechanical Couplings, Flange Adapters & Mechanical Tees

Section 1. Grooved Mechanical Couplings, Flange Adapters & Mechanical Tees Section 1 Grooved Mechanical ouplings, Flange dapters & Mechanical Tees Grooved Mechanical ouplings... 1 Rigid & Flexible ouplings... 13 M-7 Installation-Ready Rigid oupling... 14 K-9 & Z05 Rigid oupling...

More information

Ford Service Saddles and Tapping Sleeves

Ford Service Saddles and Tapping Sleeves Section AA 04/2013; web revision 02/2014 Ford Service Saddles and Tapping Sleeves The Ford Meter Box Company, Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 260-563-3171

More information

Grooved Piping Products

Grooved Piping Products 2 Grooved Piping Products Tyco Fire Products is ISO 9001 Certified with products manufactured in our newly constructed state of the art domestic ductile iron foundry and manufacturing facilities. We are

More information

Style 234 Restrained Flexible Single-Gasket Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date

Style 234 Restrained Flexible Single-Gasket Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date Victaulic Bolted Split-Sleeve Products (VBSP) Style 234 carbon steel couplings (formerly Depend-O-Lok Air/FluidMaster) are single-arch couplings that are commonly used in buried or exposed steel pipe applications

More information

SECTION 5 AMERICAN. Ductile Iron Mechanical Joint Fittings

SECTION 5 AMERICAN. Ductile Iron Mechanical Joint Fittings ECION 5 AMERICAN Ductile Iron Mechanical Joint Fittings he principal standards covering full body mechanical joint fittings are ANI/AWWA C110/A21.10 and ANI/AWWA C111/A21.11. Compact ductile iron fittings

More information

MILLCENTRIC FULL/100% POR T ECCENTRIC PLUG VALVE

MILLCENTRIC FULL/100% POR T ECCENTRIC PLUG VALVE ISO 9001 CERTIFIED MILLCENTRIC FULL/100% POR T ECCENTRIC PLUG VALVE Suggested Specifications The Milliken criteria of quality, reliability, safety and value are embodied in the Millcentric Eccentric valve,

More information

Ford Brass Saddles Style 101B and 202B

Ford Brass Saddles Style 101B and 202B 101B Ford Brass Saddles 101B and 202B 101B, 3/4" and 1" Taps 202B, 3/4" through 2" Taps Specifications Body - 85-5-5-5 brass alloy as per ASTM B62, ASTM B584 and AW WA C800. Threads may be FIP, AW WA,

More information

Certa-Set Main Line Piping System

Certa-Set Main Line Piping System Certa-Set Piping System Pipe (includes Couplings, Gaskets (O-rings) and Spline) Class 125 (yellow) Class 100 Emerald (green) Size SDR OD L BOD Min. Wall (lbs./ft.) Length / feet 25 feet 30 feet 40 feet

More information

2009 Edition. Tyton fittings 14"-24" NSF. For Water & Wastewater, Fire Protection & Industrial Applications. Certified to ANSI/NSF 61

2009 Edition. Tyton fittings 14-24 NSF. For Water & Wastewater, Fire Protection & Industrial Applications. Certified to ANSI/NSF 61 14"-24" Tyton fittings For Water & Wastewater, Fire rotection & Industrial Applications 2 Table of Contents TYTON Fittings 3 Assembly of TYTON Fittings 4 Bell Dimensions 6 Thickness and Dimensions 90 Bends

More information

Quicklub Lubrication Systems Fittings, Adapters and Accessories

Quicklub Lubrication Systems Fittings, Adapters and Accessories Divider Valve Mounting Accessories 246416 Valve mounting bracket 51304 ¼" nylon locknut for valve mounting 247023 Grade 8, ¼" valve mounting bolt 239499 Template for divider valve mounting (6, 8, 10 and

More information

Heavy welded steel outlet half. 3/4-inch NPT test plug. Benefits

Heavy welded steel outlet half. 3/4-inch NPT test plug. Benefits 622 Tapping Sleeve Recessed cavity for mating to lip on standard tapping valves per MSS SP60. Heavy welded steel outlet half. 3/4-inch NPT test plug. Roll resistant, self-energizing concave wedge gasket.

More information

Instructions for Installation, Operation, Care and Maintenance

Instructions for Installation, Operation, Care and Maintenance Bulletin 59 Model DDX Deluge Valve (50 mm), ½ (65 mm), (80 mm), 76 mm, 4 (00 mm), 6 (50 mm), 65 mm & 8 (00 mm) Bulletin 59 Instructions for Installation, Operation, Care and Maintenance Wet Pilot Line,

More information