PIP PN01SD0B03 Piping Material Specification 1SD0B03 Class 150, 316/316L Stainless Steel, Butt Weld, C.A., Process

Transcription

1 May 2016 Piping Piping Material Specification 1SD0B03 Class 150, 316/316L Stainless Steel, Butt Weld, C.A., Process

2 PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice has been prepared from the technical requirements in the existing standards of major industrial users, contractors, or standards organizations. By harmonizing these technical requirements into a single set of Practices, administrative, application, and engineering costs to both the purchaser and the manufacturer should be reduced. While this Practice is expected to incorporate the majority of requirements of most users, individual applications may involve requirements that will be appended to and take precedence over this Practice. Determinations concerning fitness for purpose and particular matters or application of the Practice to particular project or engineering situations should not be made solely on information contained in these materials. The use of trade names from time to time should not be viewed as an expression of preference but rather recognized as normal usage in the trade. Other brands having the same specifications are equally correct and may be substituted for those named. All Practices or guidelines are intended to be consistent with applicable laws and regulations including OSHA requirements. To the extent these Practices or guidelines should conflict with OSHA or other applicable laws or regulations, such laws or regulations must be followed. Consult an appropriate professional before applying or acting on any material contained in or suggested by the Practice. This Practice is subject to revision at any time. Process Industry Practices (PIP), Construction Industry Institute, The University of Texas at Austin, 3925 West Braker Lane (R4500), Austin, Texas PIP Member Companies and Subscribers may copy this Practice for their internal use. Changes or modifications of any kind are not permitted within any PIP Practice without the express written authorization of PIP. Authorized Users may attach addenda or overlays to clearly indicate modifications or exceptions to specific sections of PIP Practices. Authorized Users may provide their clients, suppliers and contractors with copies of the Practice solely for Authorized Users purposes. These purposes include but are not limited to the procurement process (e.g., as attachments to requests for quotation/ purchase orders or requests for proposals/contracts) and preparation and issue of design engineering deliverables for use on a specific project by Authorized User s client. PIP s copyright notices must be clearly indicated and unequivocally incorporated in documents where an Authorized User desires to provide any third party with copies of the Practice. PUBLISHING HISTORY June 2000 Issued April 2006 Complete Revision February 2001 Technical Correction May 2016 Complete Revision Not printed with State funds

3 SERVICE: Process MATERIAL: 316/316L Dual Marked RATING CLASS: 150, ASME B DESIGN CODE: ASME B TEMPERATURE LIMIT: -29 C to 425 C (-20 F to 800 F) (Note 09) STRESS RELIEF: None Required NOMINAL CORROSION ALLOWANCE: None EXAMINATION: Per ASME B31.3 PRESSURE - TEMPERATURE RATINGS METRIC For NPS 1/2 through NPS 24 (Full flange rating per ASME B16.5, Table 2-2.2) For NPS 30 through NPS 48 (Note 01) TEMP C -29 to BAR PRESSURE - TEMPERATURE RATINGS US CUSTOMARY UNITS For NPS 1/2 through NPS 24 (Full flange ratings per ASME B16.5, Table II-2-2.2) For NPS 30 through NPS 48 (Note 01) TEMP F -20 to psig ITEM NOTES NPS SCH/RAT ENDS DESCRIPTION USER CODE PIPE 01 1/2 1 1/2 40S SS, SMLS, ASTM A312-TP 316/316L 2 40S SS, EFW, ASTM A312-TP 316/316L (Ej=0.80) S SS, EFW, ASTM A312-TP 316/316L (Ej=0.80) Calc SS, EFW, ASTM A /316L CL 2 (Ej=0.85) NIPPLES Branch 1/2 1 1/2 40S SS, SMLS, ASTM A312-TP 316/316L Swage (CONC) 1/2 1 1/2 40S SS, ASTM A403-WP 316/316L-S,MSS SP-95 Swage (ECC) 1/2 1 1/2 40S SS, ASTM A403-WP 316/316L-S,MSS SP-95 FITTINGS 02 Reducer (CONC) 1/2 1 1/2 Weld SS, ASTM A403-WP 316/316L-W, ASME B16.9 Reducer (CONC) 2 48 Weld SS, ASTM A403-WP 316/316L-W, ASME B16.9 Reducer (ECC) 1/2 1 1/2 Weld SS, ASTM A403-WP 316/316L-W, ASME B16.9 Reducer (ECC) 2 48 Weld SS, ASTM A403-WP 316/316L-W, ASME B16.9 BW Pipet 170 1/2 20 Weld SS, ASTM A182-F316/316L, MSS SP-97 BW Lateral Pipet 170 1/2 2 Weld SS, ASTM A182-F316/316L, MSS SP LR ELL 1/2 1 1/2 Weld SS, ASTM A403-WP 316/316L-W, ASME B LR ELL 2 48 Weld SS, ASTM A403-WP 316/316L-W, ASME B LR ELL 1/2 1 1/2 Weld SS, ASTM A403-WP 316/316L-W, ASME B LR ELL 2 48 Weld SS, ASTM A403-WP 316/316L-W, ASME B16.9 Tee 1/2 1 1/2 Weld SS, ASTM A403-WP 316/316L-W, ASME B16.9 Tee 2 48 Weld SS, ASTM A403-WP 316/316L-W, ASME B16.9 Tee (RED) 1/2 1 1/2 Weld SS, ASTM A403-WP 316/316L-W, ASME B16.9 Tee (RED) 2 48 Weld SS, ASTM A403-WP 316/316L-W, ASME B16.9 Plug 53 1/2 2 PE SS, ASTM A182-F316/316L, round head, ASME B16.11 Cap 1/2 48 Weld SS, ASTM A403-WP 316/316L-S, ASME B16.9 Stub End LJ 22 1/2 1 1/2 Weld SS, ASTM A403-WP 316/316L-W, ASME B16.9, short pattern Stub End LJ 22 1/2 16 Weld SS, ASTM A403-WP 316/316L-W, ASME B16.9, short pattern VALVES Gate 1/2 24 Class 150 RF 316 SS body, trim 12 GA01ST501 Gate 12 1/2 24 Class 300 RF 316 SS body, trim 12 GA03ST501 Globe 1/2 12 Class 150 RF 316 SS body, trim 12 GL01ST500 Lug Dual PLT Check 26, Class 150 RF 316 SS body, trim 10r CD01ST702 Dual PLT Check 26, Class 150 RF 316 SS body, trim 10r CD01ST512 Wafer Dual PLT Check 07, 26, 63, Class 150 RF 316 SS body, trim 10r CD01ST700 Swing Check 62 1/2 24 Class 150 RF 316 SS body, trim 10 CS01ST501 Ball 09 1/2 6 Class 150 RF 316 SS body w/ 316 SS trim, RPTFE ST BA01ST500 Ball 08, 09 1/2 6 Class 150 RF 316 SS body w/ 316 SS trim, RPTFE ST, FP BA01ST501 Ball Class 150 RF 316 SS body w/ 316 SS trim, RPTFE ST, GO BA01ST504 Ball 08, Class 150 RF 316 SS body w/ 316 SS trim, RPTFE ST, GO, FP BA01ST505 Ball Class 150 RF 316 SS body w/ 316 SS trim, RPTFE ST, GO BA01ST502 Ball 08, Class 150 RF 316 SS body w/ 316 SS trim, RPTFE ST, GO, FP BA01ST503 Process Industry Practices Page 1 of 3

4 ITEM NOTES NPS SCH/RAT ENDS DESCRIPTION USER CODE Wafer Butterfly 07, Class 150 RF 316 SS body w/ 316 SS trim, 316 SS/RPTFE ST BF01ST700 Wafer Butterfly 07, Class 150 RF 316 SS body w/ 316 SS trim, 316 SS/RPTFE ST, GO BF01ST701 Lug Butterfly 09, 26, Class 150 RF 316 SS body w/ 316 SS trim, 316 SS/RPTFE ST, BF01ST702 Lug Butterfly 09, 26, Class 150 RF 316 SS body w/ 316 SS trim, 316 SS/RPTFE ST, GO BF01ST703 Lug Butterfly 09, 26, Class 150 RF 316 SS body w/ 316 SS trim, 316 SS/RPTFE ST, GO BF01ST704 Plug 09 1/2 3 Class 150 RF 316 SS body w/ 316 SS trim, PTFE sleeve lined PL01ST500 Plug Class 150 RF 316 SS body w/ 316 SS trim, PTFE sleeve lined, GO PL01ST501 Plug 09, 26 1/2 3 Class 150 RF 316 SS body w/ 316 SS trim, PTFE sleeve lined, low PL01ST502 emission bonnet Plug 09, Class 150 RF 316 SS body w/ 316 SS trim, PTFE sleeve lined, low emission bonnet, GO PL01ST503 FLANGES Lap Joint 22 1/2 16 Class 150 RF CS, ASTM A105, ASME B16.5 Lap Joint 12, 22 1/2 16 Class 300 RF CS, ASTM A105, ASME B16.5 Blind 1/2 24 Class 150 RF SS, ASTM A182-F316/316L, ASME B16.5 Blind 12 1/2 24 Class 300 RF SS, ASTM A182-F316/316L, ASME B16.5 Blind Class 150 RF SS, ASTM A182-F316/316L, ASME B16.47, Series B Blind Class 150 RF SS, ASTM A182-F316/316L, ASME B16.47, Series A Weld Neck 22 1/2 24 Class 150 RF SS, ASTM A182-F316/316L, ASME B16.5 Weld Neck 12, 22 1/2 24 Class 300 RF SS, ASTM A182-F316/316L, ASME B16.5 Weld Neck Class 150 RF SS, ASTM A182-F316/316L, ASME B16.47, Series B Weld Neck Class 150 RF SS, ASTM A182-F316/316L, ASME B16.47, Series A Pair WN Orifice 2 24 Class 300 RF SS, ASTM A182-F316/316L, ASME B16.36, SW taps GASKETS BOLTING Stud Bolts Cap Screw 178 1/2 24 Class 150 Low stress spiral wound Type 316L SS winding, w/ flexible graphite filler, w/316l SS inner ring and CS outer ring, ASME B /2 24 Class 300 Spiral wound, Type 316L SS winding, w/ flexible graphite filler, w/316l SS inner ring and CS outer ring, ASME B Class 150 Low stress spiral wound, Type 316L SS winding, w/ flexible graphite filler, w/316l SS inner ring and CS outer ring, ASME B16.20, ASME B16.47 Series B dimensions Class 150 Low stress spiral wound Type 316L SS winding, w/ flexible graphite filler, w/316l SS inner ring and CS outer ring, ASME B16.20, ASME B16.47 Series A dimensions Class 300 Spiral wound Type 316L SS winding, w/ flexible graphite filler, w/316l SS inner ring and CS outer ring, ASME B16.20, ASME B16.47 Series B dimensions Class 300 Spiral wound Type 316L SS winding, w/ flexible graphite filler, w/316l SS inner ring and CS outer ring, ASME B16.20, ASME B16.47 Series A dimensions ASTM A193, Gr B7 stud, w/ 2 heavy hex nuts, ASTM A194, Gr 2H ASTM A193, Gr. B7 heavy hex Process Industry Practices Page 2 of 3

5 90 BRANCH CONNECTION Legend and Chart BRANCH SIZE 48 T 42 E T 36 E E T 30 E E E T 24 E E E E T 20 W E E E E T 18 W W E E E E T 16 W W W E E E E T 14 W W W W E E E E T 12 W W W W W E E E E T 10 W W W W W W E E E E T 8 W W W W W W W E E E E T 6 W W W W W W W W E E E E T 4 W W W W W W W W W W E E E T 3 W W W W W W W W W W W W E E T 2 W W W W W W W W W W W W W E E T 1 1/2 W W W W W W W W W W W W W W W W T 1 W W W W W W W W W W W W W W W W E T 3/4 W W W W W W W W W W W W W W W W E E T 1/2 W W W W W W W W W W W W W W W W E E E T /2 1 3/4 1/2 HEADER SIZE E Reducing Tee T Tee W BW Pipet NOTES: 01 If a pipe schedule is shown under "SCH/RAT," it shall be adequate for the full flange rating. If "CALC" is shown, the pressure limit may be lower than full flange rating. 02 All butt-welded component thicknesses shall match the pipe thickness. 07 These valves have no flanges but are installed between line flanges with extra-length bolts. 08 Full-port valves shall be used if indicated on the P&ID. 09 Pressure and temperature rating can be limited by certain components permitted by this Practice. Manufacturer's recommended pressure-temperature restrictions shall be consulted. 12 These flanges shall be used only to match Class 300 flange connections at control valves and special equipment. 22 Stub ends with lap-joint back-up flanges may be used for temperatures up to 500ºF (260ºC). For higher temperatures, weld-neck flanges shall be used. 26 These check valves shall be used only if indicated on the P&ID. 53 To be used where required for pipe supports, dummy legs and unused socketweld taps. 62 These check valves shall be installed in a horizontal position with cover up or in a vertical position with upward flow. 63 These check valves shall be installed in a horizontal position with hinge pin vertical or in a vertical position with upward flow. 170 These items should be qualified for use in this specification in accordance with ASME B31.3, Paragraph Wafer-type valves are not recommended for hazardous or flammable service or for temperatures greater than 260 C (500 F). 173 These flanges shall be used only with Series A flanged connections. 178 Use cap screws for valves or flanges containing threaded holes. It is recommended that cap screws be supplied by valve supplier/manufacturer to ensure proper length for all threaded holes. REFERENCES: Process Industry Practices (PIP) PIP PNF Vents, Drains, and Instrument Connection Details PIP PNSMV023 - Stainless Steel Gate Valve Descriptions PIP PNSMV024 - Stainless Steel Globe Valve Descriptions PIP PNSMV025 - Stainless Steel Check Valve Descriptions PIP PNSMV026 - Stainless Steel Ball Valve Descriptions PIP PNSMV027 - Stainless Steel Butterfly Valve Descriptions PIP PNSMV028 - Stainless Steel Plug Valve Descriptions Process Industry Practices Page 3 of 3