Piping Material Specification - Piping class : CS101
|
|
- Lisa Brown
- 6 years ago
- Views:
Transcription
1 Piping Material Specification - Piping class : CS101 SERVICE PROCESS (NG) BASIC MATERIAL CARBON STEEL RATING CLASS 150#, ASME B 16.5 DESIGN CODE ASME B 31.3 DESIGN TEMPERATURE NOMINAL CORROSION ALLOWANCE DESIGN PRESSURE 45ºC (113ºF) 2 mm 10 bar EXAMINATION per ASME B 31.3 ITEM NOTES SIZE (DN) TYPE MATERIAL DIMN.STD SCH / RATING ENDS REMARKS PIPES FITTINGS SMLS ASTM A 106 Gr B ASME B BE SMLS ASTM A 106 Gr B ASME B STD BE WN ASTM A 105 ASME B # RF WN ASTM A 105 ASME B # RF 90º ELL LR ASTM A 234 Gr WPB ASME B BE LR ASTM A 234 Gr WPB ASME B 16.9 STD BE 45º ELL REDUCER TEE CAP ASTM A 234 Gr WPB ASME B 16.9 STD BE CON / ECC ASTM A 234 Gr WPB ASME B BE CON / ECC ASTM A 234 Gr WPB ASME B 16.9 STD BE EQ / RED ASTM A 234 Gr WPB ASME B BE EQ / RED ASTM A 234 Gr WPB ASME B 16.9 STD BE ASTM A 234 Gr WPB ASME B 16.9 STD BE ASTM A 105 MSS SP BE WELDOLET ASTM A 105 MSS SP-97 STD BE GASKETS SPIRAL WOUND SS 304 WITH GRAPHITE ASME B # BOLTS STUD BOLT ASTM A 193 Gr B7 / & WITH TWO HEAVY ASTM A 194 Gr 2H ASME B NUTS HEXAGONAL NUTS WITH CS CENTERING RING 1
2 BRANCH CONNECTION TABLE - CS SW TEE 2. SCRD TEE 3. SW/SCRD HALF COUPLING 4. BW TEE 5. SOCKOLET 6. THREDOLET 7. WELDOLET B R A N C H S I Z E REINFORCED SET-ON UNREINFORCED SET-ON HEADER SIZE NOTES : 01) USE 5D BEND IN PLACE OF 90º ELBOWS FOR SIZES DN 15 TO 40 WHERE THERE IS NO SPACE RESTRICTION. ) ALL BUTT WELDED COMPONENT THICKNESSES SHALL MATCH THE PIPE THICKNESS. 2
3 Piping Material Specification - Piping Class : CS1 SERVICE UTILITY (WATER) BASIC MATERIAL : CARBON STEEL RATING CLASS 150#, ASME B 16.5 DESIGN CODE :ASME B 31.3 DESIGN TEMPERATURE 80ºC (176º F) EXAMINATION :per ASME B 31.3 NOMINAL CORROSION ALLOWANCE 2mm DESIGN PRESSURE 7 bar ITEM NOTES SIZE (DN) TYPE MATERIAL DIMN.STD SCH / RATING ENDS REMARKS PIPES ERW IS 1239 PART 1 IS 1239 PART 1 HVY PE ERW IS 1239 PART 1 IS 1239 PART 1 HVY BE SO IS 2062 ASME B # RF FABRICATE FROM PLATE FITTINGS 90º ELL 45º ELL FORGED ASTM A 105 ASME B CLASS 3000 SW LR ASTM A 234 Gr WPB ASME B TO SUIT PIPE BE FORGED ASTM A 105 ASME B CLASS 3000 SW ASTM A 234 Gr WPB ASME B TO SUIT PIPE BE HALF ASTM A 105 ASME B CLASS 3000 SW COUPLING RED. ASTM A 105 ASME B CLASS 3000 SW FULL ASTM A 105 ASME B CLASS 3000 SW REDUCER CON / ECC ASTM A 234 Gr WPB ASME B TO SUIT PIPE BE TEE CAP EQ./ RED. ASTM A 105 ASME B CLASS 3000 SW EQ./ RED. ASTM A 234 Gr WPB ASME B TO SUIT PIPE BE ASTM A 105 ASME B CLASS 3000 SW ASTM A 234 Gr WPB ASME B TO SUIT PIPE BE GASKETS FULL FACE NBR ASME B # BOLTS HEXAGONAL & IS 1367 CL 4.6 / 4 IS 1367 MACHINE BOLTS NUTS WITH NUTS 3
4 BRANCH CONNECTION TABLE - CS1 1. SW TEE 2. SCRD TEE 3. SW/SCRD HALF COUPLING 4. BW TEE 5. SOCKOLET 6. THREDOLET 7. WELDOLET 8. REINFORCED SET-ON 9. UNREINFORCED SET-ON B R A N C H S I Z E HEADER SIZE NOTES : 01) USE SOCKET WELD ELBOWS WHERE 5D PIPE BEND CANNOT BE ACCOMODATED. ) ALL BUTT WELDED COMPONENT THICKNESSES SHALL MATCH THE PIPE THICKNESS. 4
5 Piping Material Specification - Piping Class : CS303 SERVICE PROCESS (NG) BASIC MATERIAL CARBON STEEL RATING CLASS 300#, ASME B 16.5 DESIGN CODE ASME B 31.3 DESIGN TEMPERATURE 45ºC (113º F) EXAMINATION per ASME B 31.3 NOMINAL CORROSION ALLOWANCE 2mm DESIGN PRESSURE 45 bar ITEM NOTES SIZE (DN) TYPE MATERIAL DIMN.STD SCH/RATING ENDS REMARKS PIPES BLIND FITTINGS SMLS ASTM A 106 Gr B ASME B BE SMLS ASTM A 106 Gr B ASME B STD BE SMLS ASTM A 106 Gr B ASME B BE WN ASTM A 105 ASME B # RF WN ASTM A 105 ASME B # RF WN ASTM A 105 ASME B # RF FORGED ASTM A 105 ASME B # RF 01, LR ASTM A 234 Gr WPB ASME B BE 90º ELL LR ASTM A 234 Gr WPB ASME B 16.9 STD BE LR ASTM A 234 Gr WPB ASME B BE 45º ELL ASTM A 234 Gr WPB ASME B 16.9 STD BE ASTM A 234 Gr WPB ASME B BE CON / ECC ASTM A 234 Gr WPB ASME B BE REDUCER CON / ECC ASTM A 234 Gr WPB ASME B 16.9 STD BE CON / ECC ASTM A 234 Gr WPB ASME B BE EQ / RED ASTM A 234 Gr WPB ASME B BE TEE EQ / RED ASTM A 234 Gr WPB ASME B 16.9 STD BE EQ / RED ASTM A 234 Gr WPB ASME B BE CAP ASTM A 234 Gr WPB ASME B 16.9 STD BE ASTM A 234 Gr WPB ASME B BE ASTM A 105 MSS SP BE WELDOLET ASTM A 105 MSS SP - 97 STD BE ASTM A 105 MSS SP BE ASTM A 105 MANF. 80 BE ELBOWLET ASTM A 105 MANF. STD BE ASTM A 105 MANF. 40 BE SWAGE NIPPLE 8-25 CON / ECC ASTM A 106 Gr B MSS SP PE GASKETS SPIRAL WOUND SS 304 WITH GRAPHITE BOLTS STUD BOLT ASTM A 193 Gr B7 / & WITH TWO HEAVY NUTS HEXAGONAL NUTS ASTM A 194 Gr 2H ASME B # ASME B WITH CS CENTERING RING 5
6 BRANCH CONNECTION TABLE -CS SW TEE 2. SCRD TEE 3. SW/SCRD HALF COUPLING 4. BW TEE B R A N C H SOCKOLET 6. THREDOLET 7. WELDOLET 8. REINFORCED SET-ON 9. UNREINFORCED SET - ON S I Z E HEADER SIZE NOTES : 01) USE 5D BEND IN PLACE OF 90º ELBOWS FOR SIZES DN15 TO DN40 WHERE THERE IS NO SPACE RESTRICTION. ) ALL BUTT WELDED COMPONENT THICKNESSES SHALL MATCH THE PIPE THICKNESS. 6
7 Piping Material Specification - Piping Class : GI104 SERVICE INSTRUMENT AIR, NITROGEN BASIC MATERIAL CARBON STEEL, GALVANISED RATING CLASS 150#, ASME B 16.5 DESIGN CODE ASME B 31.3 DESIGN TEMPERATURE 45ºC (113º F) EXAMINATION per ASME B 31.3 NOMINAL CORROSION ALLOWANCE DESIGN PRESSURE NIL 7 bar ITEM NOTES SIZE (DN) TYPE MATERIAL DIMN.STD SCH / RATING ENDS REMARKS PIPES ERW IS 1239 PART 1 GALVANISED IS 1239 PART 1 HVY SCRD TO NPT SCRD ASTM A 105 GALVANISED ASME B # FF FITTINGS 90º ELL FORGED ASTM A 105 GALVANISED ASME B # SCRD TO NPT 45º ELL FORGED ASTM A 105 GALVANISED ASME B # SCRD TO NPT FULL COUPLING FORGED ASTM A 105 GALVANISED ASME B # SCRD TO NPT TEE EQ / RED ASTM A 105 GALVANISED ASME B # SCRD TO NPT CAP FORGED ASTM A 105 GALVANISED ASME B # SCRD TO NPT UNION FORGED ASTM A 105 GALVANISED MSS-SP # SCRD TO NPT BUSH FORGED ASTM A 105 GALVANISED ASME B # SCRD TO NPT NIPPLE IS 1239 PART 1 GALVANISED IS 1239 PART 1 HVY SCRD TO NPT GASKETS FULL FACE NBR ASME B # BOLTS & NUTS IS 1367 CI 4.6 / 4 GALVANISED IS 1367 HEXAGONAL MACHINE BOLTS WITH NUTS 7
8 BRANCH CONNECTION TABLE - GI SW TEE 2. SCRD TEE 3. SW/SCRD HALF COUPLING 4. BW TEE 5. SOCKOLET 6. THREDOLET 7. WELDOLET 8. REINFORCED SET-ON B R A N C H S I Z E HEADER SIZE 9. UNREINFORCED SET-ON 8
9 Piping Material Specification - Piping Class : CS305J SERVICE PROCESS (NG) BASIC MATERIAL CARBON STEEL RATING CLASS 300#, ASME B 16.5 DESIGN CODE ASME B 31.3 DESIGN TEMPERATURE 45ºC (113º F) EXAMINATION per ASME B 31.3 NOMINAL CORROSION ALLOWANCE DESIGN PRESSURE 2mm 45 bar ITEM NOTES SIZE (DN) TYPE MATERIAL DIMN.STD SCH / RATING ENDS REMARKS CORE PIPE JACKET PIPE BLIND 01, 05, SMLS ASTM A 106 Gr B ASME B BE SMLS ASTM A 106 Gr B ASME B STD BE SMLS ASTM A 106 Gr B ASME B BE ERW IS 1239 IS 1239 HVY PE ERW IS 1239 IS 1239 HVY BE ERW IS 3589 FE 410 IS mm BE WN ASTM A 105 ASME B # RF WN ASTM A 105 ASME B # RF WN ASTM A 105 ASME B # RF FORGED ASTM A 105 ASME B # RF FITTINGS 04, LR ASTM A 234 Gr WPB ASME B BE 90º ELL LR ASTM A 234 Gr WPB ASME B 16.9 STD BE LR ASTM A 234 Gr WPB ASME B BE 45º ELL ASTM A 234 Gr WPB ASME B 16.9 STD BE ASTM A 234 Gr WPB ASME B BE CON / ECC ASTM A 234 Gr WPB ASME B BE REDUCER CON / ECC ASTM A 234 Gr WPB ASME B 16.9 STD BE CON / ECC ASTM A 234 Gr WPB ASME B BE EQ / RED ASTM A 234 Gr WPB ASME B BE TEE EQ / RED ASTM A 234 Gr WPB ASME B 16.9 STD BE EQ / RED ASTM A 234 Gr WPB ASME B BE CAP ASTM A 234 Gr WPB ASME B 16.9 STD BE ASTM A 234 Gr WPB ASME B BE ASTM A 105 MSS SP BE WELDOLET ASTM A 105 MSS SP - 97 STD BE ASTM A 105 MSS SP BE ASTM A 105 MANF. 80 BE ELBOWLET ASTM A 105 MANF. STD BE ASTM A 105 MANF. 40 BE GASKETS SPIRAL WOUND SS 304 WITH GRAPHITE ASME B # BOLTS STUD BOLT ASTM A 193 Gr B7 / & WITH TWO HEAVY ASME B NUTS HEXAGONAL NUTS ASTM A 194 Gr 2H WITH CS CENTERING RING 9
10 BRANCH CONNECTION TABLE - CS305J (CORE PIPE) 1. SW TEE 2. SCRD TEE 3. SW/SCRD HALF COUPLING 4. BW TEE SOCKOLET THREDOLET WELDOLET REINFORCED SET-ON B R A N C H S I Z E UNREINFORCED SET - ON HEADER SIZE NOTES : 01) JACKET RATING SHALL BE 7 bar AT 80ºC ( CLASS 150). ) ALL BUTT WELDED COMPONENT THICKNESSES SHALL MATCH THE PIPE THICKNESS. 03) ON THE JACKET PIPING TO BE AS PER PIPING CLASS CS1. 04) USE 5D BEND IN PLACE OF 90º ELBOWS FOR SIZES DN 15 TO DN 40 WHERE THERE IS NO SPACE RESTRICTION. 05) USE ONE INCH HALF COUPLING FOR JACKET NOZZLE CONNECTION. 10
PIP PN01CS2S01 Piping Material Specification 1CS2S01 Class 150, Carbon Steel, Socket Weld, 0.125" C.A., Process
May 2016 Piping PIP PN01CS2S01 Piping Material Specification 1CS2S01 Class 150, Carbon Steel, Socket Weld, 0.125" C.A., Process PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the
More informationPIP PN01CS1B02 Piping Material Specification 1CS1B02 Class 150, Carbon Steel, Butt Weld, C.A. Process
March 2016 Piping PIP PN01CS1B02 Piping Material Specification 1CS1B02 Class 150, Carbon Steel, Butt Weld, 0.063 C.A. Process PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the
More informationPIP PN01CA1S01 Piping Material Specification 1CA1S01 Class 150, Impact Tested Carbon Steel, Socket Weld, 0.063" C.A., Process
December 2017 Piping Piping Material Specification 1CA1S01 Class 150, Impact Tested Carbon Steel, Socket Weld, 0.063" C.A., Process PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize
More informationBALL VALVE DATA SHEET NO. 01 (150#)
BALL VALVE DATA SHEET NO. 01 (150#) VALVE CODE BF101 VALVE TYPE Double Flanged Full Port BODY MATERIAL CARBON STEEL TO ASTM A 216 Gr. WCB CLASS 150# DESIGN STANDARD ISO 17292 SIZE 1/2" TO 1 1/2" 2" TO
More informationPIP PN01SD0B03 Piping Material Specification 1SD0B03 Class 150, 316/316L Stainless Steel, Butt Weld, C.A., Process
May 2016 Piping Piping Material Specification 1SD0B03 Class 150, 316/316L Stainless Steel, Butt Weld, 0.000 C.A., Process PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost
More informationDRAWING INDEX 1 07/01/2013. Company Project Project Number Location Revision Date
DRAWING INDEX Company Project Project Number Location Revision Date LEGACY OIL & GAS INC. PIERSON PILINE TO EOG 12069 VARIOUS LSD ISSUED FOR APPROVAL January 4, 2013 Drawing No. Client No. Description
More informationCOMPLETE REVISION December Piping
December 2015 Piping Piping Material Specification 3SA0J01 Class 300, 304/304L Stainless Steel, Jacketed Construction, 0.000 C.A. Core: Process Jacket: Steam PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES
More informationCOMPLETE REVISION December Piping
December 2015 Piping PIP PN01SA0J01 Piping Material Specification 1SA0J01 Class 150, 304/304L Stainless Steel, Jacketed Construction, 0.000 C.A. Core: Process Jacket: Steam PURPOSE AND USE OF PROCESS INDUSTRY
More informationflowconme Types of Fittings Available Wall Thickness Sch 5 - Sch 160 (Sch 5s - Sch 160s) Others available upon special request
FITTINGS Overview Types of Fittings Available 45, 9 Elbows, 18 Returns (Short & Long Radius) Tees & Crosses (equal & reducing), Reducers (concentric & eccentric), Caps, Stud Ends, Weldolets, Outlets, Laterals
More informationFLANGES & GASKETS. ITEM No. QTY. DESCRIPTION SIZE MATERIAL MASS (kg) 1 1 FLANGE RFWN - DN # Sch 80 DN100mm 300# Sch 80 A
FLANGES & GASKETS Most of the flanges have intelligent custom properties built into their design tables (making extensive use of the concatenate function) to populate your Bills of Materials (example below).
More informationPIP PN03SA0B01 Piping Material Specification 3SA0B01 Class 300, 304/304L Stainless Steel, Butt Weld, C.A., Lube Oil & Seal Oil
May 2016 Piping PIP PN03SA0B01 Piping Material Specification 3SA0B01 Class 300, 304/304L Stainless Steel, Butt Weld, 0.000 C.A., Lube Oil & Seal Oil PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an
More informationPIP PN01SV0S01 Piping Material Specification 1SV0S01 Class 150, Alloy 254 SMO (UNS S31254), Socket Weld, C.A., Process (PTFE Packing/Gaskets)
May 2016 Piping PIP PN01SV0S01 Piping Material Specification 1SV0S01 Class 150, Alloy 254 SMO (UNS S31254), Socket Weld, 0.000 C.A., Process (PTFE Packing/Gaskets) PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES
More informationPIPES, PIPE FITTINGS VALVES & FLANGES
PIPES, PIPE FITTINGS VALVES & FLANGES 2 About the Company Atlas Commercial Company (Kwt.) W.L.L was established in 1962, and is part of the Boodai group of companies. Atlas is one of the oldest companies
More informationForged steel socket Welding fittings 6 ~ 13. Forged steel threaded fittings 14 ~ 20. Forged steel outlet fittings 21 ~ 23
Forged steel socket Welding fittings 6 ~ 13 Forged steel threaded fittings 14 ~ 20 Forged steel outlet fittings 21 ~ 23 Standard threads specifications 24 ~ 25 Comparison of astm specifications and similar
More informationLATEST ARRIVALS CATALOGUE STOCK
LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL
More informationForged Fittings. High Technology Valve & Fitting Series
Forged Fittings High Technology Valve & Fitting Series Forged steel socket Welding fittings 6 ~ 13 Forged steel threaded fittings 14 ~ 20 Forged steel outlet fittings 21 ~ 23 Standard threads specifications
More informationLATEST PRICE LISTS PIPES & TUBES FITTINGS VALVES CONTACT DETAILS: AUTHORISED DISTRIBUTORS of: JINDAL PIPES LTD. MAHARASHTRA SEAMLESS LTD.
LATEST PRICE LISTS 2017 PIPES & TUBES AUTHORISED DISTRIBUTORS of: JINDAL PIPES LTD. MAHARASHTRA SEAMLESS LTD. SANT INDUSTRIAL VALVES FITTINGS VS FORGED FITTINGS C BRAND ISI APPROVED G.I. FITTINGS VALVES
More informationForged High Pressure Pipe Fittings
Forged High Pressure Pipe Fittings Forged High Pressure Pipe Fittings Pressure Class Socket Weld Forged Fittings Products Dimension Specifications Pressure Class Threaded Forged Fittings Products Dimension
More informationCARBON STEEL PIPE - BUTTWELD
010-1 CARBON STEEL PIPE - BUTTWELD WEIGHT BLACK GALVANIZED FUSION BOND SIZE LBS/FT T & C P.E. T & C P.E. 1/8" 0.24 8.00 6.09 16.40 14.28 1/4" 0.42 9.61 8.25 15.27 12.91 3/8" 0.57 10.98 9.52 16.91 14.39
More informationSpecification for: Merck. Project: Caustic Tank. Elkton, VA. Title PIPING SPECIFICATIONS. Jacobs Project No. 63PZ0234. Client Number.
Specification for: Merck Project: Caustic Tank Elkton, VA Document No: 63PZ0234-B-SP-15101SP101S Title PIPING SPECIFICATIONS Jacobs Project No. 63PZ0234 Client Number. Jacobs Discipline Lead Jacobs Project
More informationC&N Industrial Group Limited. Better Pipeline, Better Connection.
C&N Industrial Group Limited Better Pipeline, Better Connection. About C&N Flange & Fitting producing Steel pipe expand & Welding Pipe accessories(jiangsu) Pipeline technology consult Incorporate on C&N
More informationForged steel socket Welding fittings 6 ~ 13. Forged steel threaded fittings 14 ~ 20. Forged steel outlet fittings 21 ~ 23
Forged steel socket Welding fittings 6 ~ 13 Forged steel threaded fittings 14 ~ 20 Forged steel outlet fittings 21 ~ 23 Standard threads specifications 24 ~ 25 Comparison of astm specifications and similar
More informationL&T VALVES BUSINESS GROUP A
Larsen & Toubro Limited (L&T) is a US $ 5 billion engineering and construction company, with a strong presence in manufacturing, services and Information Technology. L&T was founded in 1938 by two Danish
More informationCAST IRON FITTINGS STANDARD
060-1 CAST IRON FITTINGS STANDARD ITEM 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 90 ELL 11.03 15.95 6.99 7.29 8.62 12.24 16.93 26.45 90 REDUCING ELL * 22.20 14.69 12.27 15.44 31.19 41.74 45 ELL 13.59 14.60
More informationYl)HAl STrrl (INDIA) Forged High Pressure Pipe Fittings. All ISO 9001:2003/ ISO 14001:2004 / 8S Ol!SAS 18001:2007 / PED Al'PROl'ED 97/23/EC
Forged High Pressure Pipe Fittings Forged High Pressure Pipe Fittings Summary : Summary : Type 1. Elbow, Tee, Cross, Couplin g, Half Coupling, Cap, Plug, Bushing, Union, HEX. Nipple, Swage 2. nipple, Bull
More informationCopper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10)
Offshore OSNA -10 Copper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10) KME Germany GmbH & Co. KG Offshore OSNA -10 [GB] Content KME - The Company 1 The Material 2 Offshore Product Range 3 Pipes
More informationLOT DETAILS FOR LOT 16-58
DESCRIPTI MFG S/N CD QTY GATE VALVE 4" ANSI 150 CRANE MODEL 47XUF GATE VALVE: 4" ANSI 150 CRANE MODEL 47XUF CS BB RFFE A216 WCB, AS PER SET SPECS ES-PV1.14 & ES-DOT.4 LOT DETAILS FOR LOT 16-58 SN'S- J1615110933,30,28,26,24,22
More information- Seamless pipe, Welded steel pipe - Standard: ASME/JIS/DIN.
CARBON STEEL PIPES STAINLESS STEEL PIPES - Seamless pipe, Welded pipe (ERW), Spiral welded pipe. - Seamless pipe, Welded steel pipe - Standard: ASME/JIS/DIN. - Standard: ASME/JIS - Material: ASTM A53/A106
More informationSection 2. Shurjoint Grooved Fittings Flow Data / Friction Resistance Ductile Iron Grooved Fittings. Wrought Grooved Fittings
Section 2 Cast & Wrought Grooved Fittings Shurjoint Grooved Fittings... 56 Flow Data / Friction Resistance... 56 Ductile Iron Grooved Fittings 7110 / 7111 / 7112 / 7113 Elbows... 57 7120 / 7135 / 7130
More informationP I P E F I T T I N G S 2002
PIPE FITTINGS 02 INTRODUCTION PIPE FITTINGS 02 OneSteel is Australia s largest distributor of Pipes, Pipe Fittings, Valves and associated accessories. The OneSteel distribution network offers more than
More informationTotaiyo Steel Industry トタイヨ 鉄鋼業界. Manufacturers of Pipe Fittings
Y IS R QUALIT AS O D 'S RE G TE L LY S U RA NC E ISO Totaiyo Steel Industry トタイヨ 鉄鋼業界 Manufacturers of Pipe Fittings 900 PROFILE The Company TOTAIYO is the brand name of the flange, fittings manufacturing
More informationCHECK VALVES. Bolted Bonnet - Full Opening - Pressure Seal - Wafer Dual Plate, Single Plate & Tilting Disc.
A Long Experience in Energy Equipment and one Goal: The Customer s satisfaction. CHECK VALVES Bolted Bonnet - Full Opening - Pressure Seal - Wafer Dual Plate, Single Plate & Tilting Disc. Swing Check Valves
More informationDuplex Steel & Engineering Company
+91-8048601907 Duplex Steel & Engineering Company https://www.duplexsteel.net/ Incorporated in the year 1996, we at Unisteels and Engg. Co. Pvt. Ltd. are engaged in exporting, supplying variety of Super
More informationForged Steel Fittings CLASS 3000 THREADED
Forged Steel Fittings CLASS 3000 THREADED NPS 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4 DN 6 8 10 15 20 25 32 40 50 65 80 100 90 0 ELBOWS A in 0.97* 0.97 1.12 1.31 1.50 1.75 2.00 2.38 2.50 3.25 3.75
More informationFull Traceability. Material Specification. Raw Material Code. Heat Treatment
All J.B. Smith swages, bull plugs, tubing and casing nipples, and chambers are traceable to the original mill test report. To ensure traceability, all fittings are steel stamped as follows: Material Specification
More informationAccutubes. Accuracy True double averaging design +1% of rate accuracy +0.1% repeatability Tested and certified by independent flow labs
s Meriam s Flow Sensors are lab-tested and field-proven flow elements perfect for gas, liquid or steam service. With thousands in use worldwide, the continues to be the right choice when ease of installation,
More informationDirect Mount Packages
800.783.7836 Direct Mount Packages BEV9 Actuated package Size range: 1/ - Pressure rated for 1000 WOG 316 Stainless steel construction Live loaded stem seal design Full Port Threaded Ends (F) EZ99 Actuated
More informationXiamen Landee Industries Co., Ltd was founded on 14th May 2001;
ABOUT US Xiamen Landee Industries Co., Ltd was founded on 14th May 2001; Our main products are OCTG, Heat Exchanger Tube, Plate, Pressure Vessel, Line Pipe, Valve, Flange, Fitting, Gasket, Fastener, etc;
More informationUREA SERVICE FORGED VALVES
UREA SERVICE FORGED VALVES 288 UREA SERVICE VALVES 289 UREAvalves DROP CHECK VALVE UREA SERVICE PN325 1/2 to 2 DOUGLAS CHERO DROP CHECK VALVE UREA SERVICE DROP CHECK VALVE UREA SERVICE PN325 : PN325 Drop
More informationType B (Extruded Branch) Sizes 4 through 30
STOPPLE Fittings & Reduced Branch Split Tees, Sizes 4-inch and Larger Bulletin No: 1100.001.05 Date: July 2008 Cross Indexing No: n/a Supersedes: 1100.001.04 (07/06) Typical Tapping Setup For Plugging
More informationVogt Valves Catalog and Application Manual VVENCT
Vogt Valves Catalog and Application Manual VVENCT0000-06 Experience In In Motion Motion Vogt Valves, Sulphur Springs, TX Vogt Valves A History in the Making In the late 1890s, Vogt pioneered the early
More informationForged Fittings Socket Weld And Threaded
Frged Fittings Scket Weld And Threaded Types Equal tee / Reducing Tee / Full Cupling / Half Cupling / Street Elbw / Bull Plug / Bss / Unin (Male/Female) / 90 Elbw / 5 Elbw / Equal Crss / Reducing crss
More informationF-17 CATALOG. Forged Steel Valves
F-17 CATALOG Forged Steel Valves Vogt Valves A History in the Making In the late 1890s, Vogt pioneered the early development of ammonia absorption refrigeration systems that made artificial ice. This business,
More informationWe Are the Worldwide Provider for All Your Valve and Fitting Needs
Product Catalog We Are the Worldwide Provider for All Your Valve and Fitting Needs C&C strives to earn your business by offering an extensive line of high quality products with a proven track record for
More informationDK-LOK Hydraulic Pipe Fittings
Class 2000, 3000, 6000, 9000 fittings Catalog No. C-2 June 2012 DK-LOK Hydraulic Pipe Fittings are designed and manufactured to the following standards. ASME B 16.11-2005: Forged fittings, Socket-welding
More informationKVC VALVES AND PEX FITTINGS
KVC VALVES AND PEX FITTINGS 2011 KVC VALVES & PEX FITTINGS CATALOGUE 2 P a g e Table of contents 1. Cast Steel Valves..4 FIG. 272-CS-15 ( Gate ).....5 FIG. 272-CS-300 ( Gate )......6 FIG. 272-CS-600 (
More informationASME 350 BAR SAE 690 BAR
GENERAL HYDRAULIC PIPES 10-40 BAR SAE 50 BAR SAE 3000 PSI SAE 6000 PSI DIN 350-400 BAR SCHEDULE SERIE SAE 3000 PSI 1 SAE 6000 PSI ASME 350 BAR Product Page GS-ASME s 350 bar 203 SAE 690 bar - Grooving
More informationMODEL NUMBER - VALVE SELECTION CODES
Threaded Valves Model Selection Page: 1 S85 S51 1 08-3 - R - R - L 05 - B - T - T - L - 3-4 - 5-6 S0 S80 S70 S51 1 Type S0FS S85 S90 HP6000 S40 HX10000 01 1/4" 05 1" 09-1/" Size 0 3/8" 06 1-1/4" 10 3"
More informationForged Fitting.
Carbon Steel Stainless Steel www.ludahk.com Company Information Introduction Having been involving in manufacturing for 4 generations, Luda's Family witnessed the dramatic changes in China. Starting with
More informationVALVES SHOP.CHEMOILPRODUCTS.COM SHOP.CHEMOILPRODUCTS.
VALVES FITTINGS & STAINLESS STEEL BALL VALVES CAMLOCKS SPECIFICATIONS: ALUMINUM, SS, BRASS, & D. I. GRAVITY CASTING A-A-59326 STANDARDS NBR SEAT MATERIAL 50 PSI TO 250 PSI SIZE 3/4 TO 8 TYPE B F COUPLER
More informationTrunnion Ball Valves
Trunnion Ball Valves Trunnion Classification and Operating range TRUNNION type ball valves are cut off devices suitables for use both on natural gas distribution network and for liquid service when high
More informationPRESSURE GAUGES DIAL THERMOMETERS PRESSURE & TEMP. SWITCHES PRESSURE & TEMP. TRANSMITTERS PIPES, PIPE FITTINGS & FLANGES
WATER METERS VALVES & COCKS PRESSURE GAUGES DIAL THERMOMETERS PRESSURE & TEMP. SWITCHES PRESSURE & TEMP. TRANSMITTERS PIPES, PIPE FITTINGS & FLANGES FILTER, REGULATOR & LUBRICATORS W IKA V I INSTRUMENTS
More informationBall Valves & Accessories
Ball Valves & Accessories 2 Proven quality since 1892 Econosto, part of the ERIKS group, has been offering a wide variety of engineered products since 1892. By focusing on technical superiority along with
More informationE STORE PRICELIST E Store Pricelist Page No 1
E STORE PRICELIST 10-01-18 Page No 1 Index Page No Description Make Size range 4 Pricelist of M.S & G.I Pipes as per IS -1239 part I / IS 3589 JINDAL/TATA ½ to 6 Pricelist of C.S seamless Non IBR & IBR
More informationMasoneilan * Pressure Regulators Steam, Gas or Liquid Service Models 525 and 526
GE Oil & Gas Technical Specifications 05/2013 Masoneilan * Pressure Regulators Steam, Gas or Liquid Service Models 525 and 526 Pressure Reducing, Back Pressure and Differential Pressure Control 2 GE Oil
More informationYStrainers. Applications. Pressures to 3705 PSIG Temperatures to 800ºF FEATURES MATERIALS END CONNECTIONS RATINGS SIZES
Applications Process Industry Metals and Mining Power Industry Water and Waste Chemical Industry Pulp and Paper Oil and Gas YStrainers Pressures to 3705 PSIG Temperatures to 800ºF FEATURES Low pressure
More informationInte rated. Piping. Manufacturer & Exporter: A Government of India Recognized Star Export House PIPES TUBES ROUND BAR PLATES SHEETS
ISO 9001-08 ISO 14001-04 OHSAS 18001-07 PE-97/23/EC Certified Company RINA M A R I N E Approved Manufacture PIPES UBES ROUN BAR PLAES SHEES Inte rated Manufacturer & Exporter: A WORL OF FERROUS & NON -
More informationCopper-Nickel Seawater Piping Systems Offshore product range: Pipes, fittings and flanges of OSNA 10
Copper-Nickel Seawater Piping Systems Offshore product range: Pipes, fittings and flanges of OSNA 10 KME Germany AG & Co. KG OSNA 10 [GB] Member of the KME Group Contents Your Partner KME The Material
More informationE STORE PRICELIST 10/11/2017. E Store Pricelist Page No 1
E STORE PRICELIST 10/11/2017 Page No 1 Index Page No Description Make Size range 4 Pricelist of M.S & G.I Pipes as per IS -1239 part I / IS 3589 JINDAL/TATA ½ to 6 Pricelist of C.S seamless Non IBR & IBR
More informationCONTROL VALVE STANDARD SPECIFICATION
CONTROL VALVE STANDARD SPECIFICATION QUICK CHANGE TYPE 2-WAY GLOBE VALVE YAD-122Q1 Series http://www.proval.co.kr PROVAL Co., Ltd. [B-1] TOP GUIDE SINGLE SEATED TYPE GENERAL The design of Quick Change
More informationPPF PIPE FITTINGS (PAHANG) BUTTWELD FITTINGS
PPF PIPE FITTINGS (PAHANG) BUTTWELD FITTINGS 1 Pahang Pipe Fittings PPF is one of the leading manufacturers of Buttweld fittings and flanges. Our highly specialized product range is capable of catering
More informationFLANGE. Flanges used for
FLANGE FLANGE Flanges with rating class designations 150, 300, 400, 600, 900, 1500, and 2500 in sizes NPS 1 2 through NPS 24 ASME B16.5: Pipe Flanges and Flanged Fittings (NPS 24 ) ASME B16.47: NPS 26
More informationA GUIDE TO PIPE SIZES
A GUIDE TO PIPE SIZES Pipe Strengths To identify the dimensions and strengths of different pipe, it is common to use schedule terminology taken from the ANSI pipe schedule chart. The pipe schedule chart
More information6. Butterfly Valves & Accessories
1. Plastic Pipes 2. Steel Pipes 3. Penetration Tubes 4. Piping Accessories 5. Needle Valves 6. Butterfly Valves & Accessories 7. Miscellaneous Valves 7 1. PLASTIC PIPES TYPES OF PLASTIC PIPES ADAPTATOR
More informationSTOPPLE Plus Fittings
STOPPLE Plus Fittings Sizes: 4- Through 36-inch Bulletin No: 1100.007.02 Version: 08.2014 Cross Indexing No: n/a Supercedes: 1100.007.01 (06.2014) Offset in closeup Options Description STOPPLE Plus fittings
More informationPV4 and PV6 Piston Valves
Description The and are piston isolation valves that have been designed for use on steam, condensate and other liquid sytems. Available types: and Piston ¾" shown Screwed, butt weld and socket weld connections
More informationAMARSONS PIPETECH. Piping Solutions ME CO LLC SUPPLIERS OF ELECTRICAL, ELECTRO MECHANICAL & PIPING MATERIALS
AMARSONS PIPETECH ME CO LLC SUPPLIERS OF ELECTRICAL, ELECTRO MECHANICAL & PIPING MATERIALS Piping Solutions Email : info@amarsonspipetech.com Web : www.amarsonspipetech.com Company Overview About Us AMARSONS
More informationGLOBE CONTROL VALVES FOR CRYOGENIC SERVICE
GLOBE CONTROL VALVES FOR CRYOGENIC SERVICE 1-6940 Cryo valves are especially designed for cryogenic service. The construction is the same of 1-6941 and 1-6943 standard globe valves with the exception of
More informationHole-cutting. cutting a hole. After the hole has been cut all rough edges must be removed and the area within 5/8 (16mm) of the hole
Mechanical Tees Hole-cutting Shurjoint mechanical tees provide a fast and easy mid-point branch outlet, eliminating the need for welding or the use of multiple fittings. The Model M21 features a female
More informationCast Steel Bolted Cover Swing Check Valves Sizes: 2 thru 24 Pressure Class: 150 thru 1500
Cast Steel olted Cover Swing Check Valves s: 2 thru 24 Pressure Class: 150 thru 1500 Manufactured by Newmans 33 Newco Cast Carbon Steel olted onnet Valves Typical Newco Cast Steel olted Cover Swing Check
More informationWe Are the Worldwide Provider for All Your Valve and Fitting Needs
Product Catalog We Are the Worldwide Provider for All Your Valve and Fitting Needs C&C Industries strives to earn your business by offering an extensive line of high quality products with a proven track
More informationMaterials : Carbon steel or stainless steel
Size : Ends : Max Temperature : DN 15 to 600 mm Flanges PN10/16/25/40 + 150 C for flange gaskets, 200 C for flanges Max Pressure : 40 Bars for flanges PN40 Specifications : Welding flanges Flat flanges
More informationOsakue. a) Seamless b) Rolled c) Spiral-welded. Fig. 1: Pipe manufacturing methods
Piping Lines and Fittings Introduction Fluids are transported under pressure through hollow materials called lines. The common three types of fluid lines are pipes, tubes, and hoses. These lines must provide
More informationValves for general purpose & industry
Valves for general purpose & industry Carbon steel & stainless steel ball valves 1 piece body... page 14 2 piece body... page 14 2 piece body - High temperature... page 14 2 piece construction - 3 way...
More informationSTANDARDS and SPECIFICATIONS
ANSI (American National Standards Institute) ANSI B31.4 - Liquid petroleum transportation piping system. ANSI B31.4 - Gas transmission and distribution piping system. API (American Petroleum Institute)
More informationSuction Diffusers. Applications PROTECTION PUMP. Pressures to 790 PSIG Temperatures to 800ºF FEATURES MATERIALS END CONNECTIONS SIZE RANGES RATINGS
Applications Process Industry Metals and Mining Power Industry Water and Waste Chemical Industry Pulp and Paper Oil and Gas Suction Diffusers Pressures to 790 PSIG Temperatures to 800ºF FEATURES Filtration
More informationDOMIZI CHAMBER FOR LEVEL INSTRUMENTS Model : DBH-SO and DBH-WN
DOMIZI HAMBR FOR LVL INSTRUMNTS Model : DBH-SO and DBH-WN The DOMIZI hambers allow to link different level instruments (guided wave radar, torsion bars etc..) to the process, providing various benefits
More informationSEAMLESS & WELDED PIPE
SEAMLESS & WELDED PIPE SPECIFICATIONS: LENGTHS: ASTM A312M-08 6.1 METRE/RANDOMS FINISH: WELDED ANNEALED & PICKLED SEAMLESS COLD FINISH/HOT FINISH NB PIPE SIZE SIZE WELDED SEAMLESS APPROX. WGT Inch mm O.D.
More informationA Long Experience in Energy Equipment and one Goal: The Customer s satisfaction. GLOBE VALVES. Pressure Seal - Bolted Bonnet Cryogenic.
A Long Experience in Energy Equipment and one Goal: The Customer s satisfaction. GLOBE VALVES Pressure Seal - Bolted Bonnet Cryogenic. 1 Design 2 Outside 3 Face 4 Non 5 Suggested 6 Dimension 7 Special
More informationYogendra Enterprise.
+91-8048601603 Yogendra Enterprise https://www.indiamart.com/yogendraenterprise/pdf1.html Distributor, Suppliers and Traders of Galvanized Pipe fittings, Seamless MSL JSL pipe, Stainless Steel Pipe fittings,
More informationBLOCK & BLEED VALVE. High Technology Valve & Fitting Series.
BLOCK & BLEED VALVE High Technology Valve & Fitting Series www.tanamachine.com Brief Introduction APPLICATION & INSTALLATION SOLUTIONS TANA instrumentation products provided the ultimate suitable solutions
More informationKO Series. Cast Steel Gate Valves
FEATURES & BENEFITS Body and bonnet of Class 150 - Class 900 gate valves are usually connected with studs and nuts. The body and bonnet of Class 1500 - Class 2500 gate valves are usually a pressure sealed
More informationTOTAL PIPING SOLUTIONS, INC. TRIPLE-TAP
TOTAL PIPING SOLUTIONS, INC. TRIPLE-TAP Extended Range Stainless Steel Push Plug Line Stop Tapping Sleeve Technical Specifications Controlled Document: ENGTS-05/120417 December 2017 TRIPLE TAP Extended
More informationFully Welded Ball Valves
Ball Valves Ball Valves FULLY WELDED type ball valves are cut off devices suitables for use both on natural gas distribution network and for liquid service when high performance on thightness and low pressure
More informationSERIES 17 3 & 4 WAY BALL VALVE
SERIES & WAY BALL VALVE CARBON STEEL ASTM A WCB STAINLESS STEEL ASTM A CF8M LIVE LOADED STEM PACKING BLOWOUT PROOF STEM AVAILABLE IN T, L, LL & 80 PORT CONFIGURATION LOCKABLE HANDLE ISO MOUNTING PAD SEAT
More informationMILITARY STANDARD SCHEDULE OF PIPING, VALVES, FITTINGS, AND ASSOCIATED PIPING COMPONENTS FOR NAVAL SURFACE SHIPS
NOTICE OF CHANGE INCH-POUND ) 8 July 2002 MILITARY STANDARD SCHEDULE OF PIPING, VALVES, FITTINGS, AND ASSOCIATED PIPING COMPONENTS FOR NAVAL SURFACE SHIPS TO ALL HOLDERS OF : 1. THE FOLLOWING PAGES OF
More informationstandard and industrial pipe fittings
fittings mm sizes standard and industrial pipe fittings Photo: Chlor Generators Ltd Available in a wide range of mm sizes from 10mm to 500mm, and in a choice of pressure ratings from 6 bars to 16 bars,
More informationThe bolted bonnet configuration achieves simultaneously the best performance and the highest safety.
The achieves simultaneously the best performance and the highest safety. Features A rugged body and bonnet design in accordance with API 600, ASME B16.34 and BS 1414. Tight shutoff performance is always
More informationKSB RPH-V. Process pumps. 3. Designation. 1. Application. 2. Design. 4. Operating Data. to API 610, 11th edition and ISO 13709
Type Series Booklet 1316.56/04-EN (A1316.0.2E/8) KSB Process pumps to API 610, 11th edition and ISO 13709 1. Application pumps are mainly used in refineries as well as in chemical and petrochemical plants.
More informationSECTIO N 15 Phone: (866) Fax: (888)
PVC FITTINGS SCHEDULE 40, 80, INSERT NYLON FITTINGS PVC & CPVC NIPPLES SECTIO N 15 www.cbsupplies.ca Phone: (866) 503-5523 Fax: (888) 562-2095 AGI@cbsupplies.ca PRODUCTS LIST SCHEDULE 40 PVC PRESSURE FITTINGS
More informationDatasheet Rev.3 Feb 2015 Venturi tube
Datasheet Rev.3 Feb 2015 Venturi tube Venturi tube design based on IS5167, ASME.MFC.3M and IS TR15377 :2007 industry standards No need for calibration standardised principle Accuracy, repeatability and
More informationTRUNNION BALL VALVES. TBV 7.10
TRUNNION BALL VALVES WWW.VALVE.COM TBV 7.10 ABOUT US Our mission at Universal Flow (), is to provide a quality product at a competitive price and to meet the needs and requirements of our customers in
More informationBlock & Bleed Valve.
Block & Bleed Valve www.nacoroke.com BLOCK & BLEED VALVES CONTENTS Introduction Application installaltions Specification Ball valve type OS&Y Needle type Glove Needle Valve type Block & Bleed valve Monoflange
More informationGRUVLOK FITTINGS FOR GROOVED-END PIPE
GRUVLOK FITTINGS FOR GROOVED-END PIPE Gruvlok fittings are available through 24" nominal pipe size in a variety of styles. Use the Fitting Table to convert nominal pipe size to corresponding pipe These
More informationItem 305D-CRYOGENIC 3-PC Cryogenic Ball Valve
Item 5D-RYOGENI 3-P ryogenic Ball Valve LASS 600/ 00/ 260WOG/ PN 0 SIZE: /2"-" SPEIFIATION * MSS SP-, 2006 cryogenic standard * Suitable for -6 working condition * Body & end caps quality investment casting
More informationContents FORGED FITTINGS. Photos 1. Elbow Tee Cross 2. Cap Coupling Lateral 3. Reducer Inserts MSS Unions & Unions HG21634 MSS SP-83 5
JNFIT INDUSTRIES LIMITED Add: Jiangyin, Jiangsu Province, Yingkou, Liaoning Province, P.R. China Website:www.oilgasolution.com Email:sales@oilgasolution.com Contents FORGED FITTINGS Page Photos 1 Socket
More informationGate Valve (Model 1000)
Gate Valve (Model 1000) s: - 2 to 24 (50mm to 600mm) Rating: - Class 150 to Class 2500 Cast Steel Valves Flange End But-Weld End Information:- www.invacovalves.com sandesh@invacovalves.com invacovalves@gmail.com
More informationFasani Pressure Seal Cast Gate Valves - Style A Wedge Gate and Parallel Slide
A series of robust gate valves specifically designed for applications in the power industry Features General application Our pressure seal -Style A gate valves are recommended for several applications
More informationindustrial and economy pipe fittings PVC-U Solvent Cement WELD-ON REGULAR 719 Size Code Price 500ml tin
pvcu fittings mm sizes industrial and economy pipe fittings fittings mm sizes 68 Photo: Chlor Generators Ltd Available in a wide range of mm sizes from 10mm to 500mm, and in a choice of pressure ratings
More informationSERIES GB CONTROL VALVES GLOBE-CAGE BALANCED, CAGE GUIDED
SERIES GB CONTROL VALVES GLOBE-CAGE BALANCED, CAGE GUIDED Metso's Neles series GB cage guided, balanced trim globe valves are economical high performance control valves designed to provide the best possible
More information