PIP PN01CS1B02 Piping Material Specification 1CS1B02 Class 150, Carbon Steel, Butt Weld, C.A. Process

Transcription

1 March 2016 Piping PIP PN01CS1B02 Piping Material Specification 1CS1B02 Class 150, Carbon Steel, Butt Weld, C.A. Process

2 PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice has been prepared from the technical requirements in the existing standards of major industrial users, contractors, or standards organizations. By harmonizing these technical requirements into a single set of Practices, administrative, application, and engineering costs to both the purchaser and the manufacturer should be reduced. While this Practice is expected to incorporate the majority of requirements of most users, individual applications may involve requirements that will be appended to and take precedence over this Practice. Determinations concerning fitness for purpose and particular matters or application of the Practice to particular project or engineering situations should not be made solely on information contained in these materials. The use of trade names from time to time should not be viewed as an expression of preference but rather recognized as normal usage in the trade. Other brands having the same specifications are equally correct and may be substituted for those named. All Practices or guidelines are intended to be consistent with applicable laws and regulations including OSHA requirements. To the extent these Practices or guidelines should conflict with OSHA or other applicable laws or regulations, such laws or regulations must be followed. Consult an appropriate professional before applying or acting on any material contained in or suggested by the Practice. This Practice is subject to revision at any time. Process Industry Practices (PIP), Construction Industry Institute, The University of Texas at Austin, 3925 West Braker Lane (R4500), Austin, Texas PIP Member Companies and Subscribers may copy this Practice for their internal use. Changes or modifications of any kind are not permitted within any PIP Practice without the express written authorization of PIP. Authorized Users may attach addenda or overlays to clearly indicate modifications or exceptions to specific sections of PIP Practices. Authorized Users may provide their clients, suppliers and contractors with copies of the Practice solely for Authorized Users purposes. These purposes include but are not limited to the procurement process (e.g., as attachments to requests for quotation/ purchase orders or requests for proposals/contracts) and preparation and issue of design engineering deliverables for use on a specific project by Authorized User s client. PIP s copyright notices must be clearly indicated and unequivocally incorporated in documents where an Authorized User desires to provide any third party with copies of the Practice. PRINTING HISTORY September 2003 Issued March 2016 Complete Revision Not printed with State funds

3 SERVICE: Process MATERIAL: Carbon Steel RATING CLASS: 150, ASME B DESIGN CODE: ASME B TEMPERATURE LIMIT: -29 C to 425 C (-20ºF to 800ºF) (Note 09) STRESS RELIEF: Per ASME B31.3 NOMINAL CORROSION ALLOWANCE: 1.5 mm (0.063 in.) [1.27 mm (0.05 in. MIN)] EXAMINATION: Per ASME B31.3 PRESSURE - TEMPERATURE RATINGS METRIC For NPS 1/2 through NPS 36 (Full flange rating per ASME B16.5, Table and ASME B16.47) For NPS 42 through NPS 48 (Note 01) TEMP C -29 to BAR PRESSURE - TEMPERATURE RATINGS US CUSTOMARY UNITS For NPS 1/2 through NPS 36 (Full flange rating per ASME B16.5, Table II and ASME B16.47) For NPS 42 through NPS 48 (Note 01) TEMP F -20 to PSIG ITEM NOTES NPS SCH/RAT ENDS DESCRIPTION USER CODES PIPE 01 1/2-2 XS CS, SMLS, ASTM A106-B or A53-B, Type S 3-24 STD CS, ERW, ASTM A53-B, Type E (Ej=0.85) STD CS, EFW, ASTM A671-CB60, Class 13 (Ej=0.85) XS CS, EFW, ASTM A671-CB60, Class 13 (Ej=0.85) NIPPLES Branch 1/2-1½ XS CS, SMLS, ASTM A106-B or A53-B, type S Swage (CONC) 1/2-1½ XS CS, ASTM A234-WPB-S, MSS SP-95 Swage (ECC) 1/2-1½ XS CS, ASTM A234-WPB-S, MSS SP-95 FITTINGS 02 BW Latrolet 1/2-1½ Class 3000 Weld CS, ASTM A105, MSS SP-97 BW Elbolet 170 1/2-1½ Class 3000 Weld CS, ASTM A105 Plug 53 1/2 PE CS, ASTM A105, round head, ASME B16.11 Reducer (CONC) 1/2-48 Weld CS, ASTM A234-WPB-W, ASME B16.9 Reducer (ECC) 1/2-48 Weld CS, ASTM A234-WPB-W, ASME B16.9 Weldolet 1/2-42 Weld CS, ASTM A105, MSS SP LR ELL 1/2-48 Weld CS, ASTM A234-WPB-W, ASME B LR ELL 1/2-48 Weld CS, ASTM A234-WPB-W, ASME B16.9 Tee 1/2-48 Weld CS, ASTM A234-WPB-W, ASME B16.9 Tee (RED) 1/2-48 Weld CS, ASTM A234-WPB-W, ASME B16.9 Cap 1/2-48 Weld CS, ASTM A234-WPB-S, ASME B16.9 VALVES Gate 1/2-2 Class 150 RF CS body, trim 8 GA01CB500 Gate 1/2-2 Class 300 RF CS body, trim 8 GA03CB500 Gate 3-24 Class 150 RF CS body, trim 8, FP GA01CB501 Gate Class 150 RF CS body, trim 8, FP GA01CB502 Globe 1/2-2 Class 150 RF CS body, trim 8 GL01CB501 Globe 3-12 Class 150 RF CS body, trim 8 GL01CB500 Lift Check 61 1/2-2 Class 150 RF CS body, trim 8, piston CL01CB500 Swing Check Class 150 RF CS body, trim 8 CS01CB500 Swing Check Class 150 RF CS body, trim 8 CS01CB501 Dual PLT Check 07, 26, Class 150 RF CS body, trim 1 CD01CB700 Lug Dual PLT Check 07, 26, Class 150 RF CS body, trim 1 CD03CB702 Dual PLT Check 26, Class 150 RF CS body, trim 1 CD03CB500 Dual PLT Check 26, Class 150 RF CS body, trim 1 CD03CB501 Ball 09 1/2-6 Class 150 RF CS body, w/316 SS trim, R-PTFE ST BA01CB500 Ball Class 150 RF CS body, w/316 SS trim, R-PTFE ST, GO BA01CB505 Ball Class 150 RF CS body, w/316 SS trim, R-PTFE ST, GO BA01CB502 Ball Class 150 RF CS body, w/316 SS trim, R-PTFE ST, GO BA01CB506 Ball 08, Class 150 RF CS body, w/316 SS trim, R-PTFE ST, FP BA01CB501 Ball 08, Class 150 RF CS body, w/316 SS trim, R-PTFE ST, GO, FP BA01CB504 Ball 08, Class 150 RF CS body, w/316 SS trim, R-PTFE ST, GO, FP BA01CB503 Ball 08, Class 150 RF CS body, w/316 SS trim, R-PTFE ST, GO, FP BA01CB507 Lug Butterfly 09, Class 150 RF CS body, w/316 SS trim, RPTFE ST BF01CB700 Lug Butterfly 09, Class 150 RF CS body, w/316 SS trim, RPTFE ST, GO BF01CB701 Lug Butterfly 09, Class 150 RF CS body, w/316 SS trim, RPTFE ST, GO BF01CB702 Plug 09 1/2-3 Class 150 RF CS body, w/316 SS trim, PTFE sleeve lined PL01CB500 Plug Class 150 RF CS body, w/316 SS trim, PTFE sleeve lined, GO PL01CB501 Process Industry Practices Page 1 of 3

4 FLANGES 02 Blind 1/2-24 Class 150 RF CS, ASTM A105, ASME B16.5 Blind 12 1/2-24 Class 300 RF CS, ASTM A105, ASME B16.5 Blind Class 150 RF CS, ASTM A105, ASME B16.47 Series B Blind Class 150 RF CS, ASTM A105, ASME B16.47 Series A Slip-On 12 1/2-24 Class 300 RF CS, ASTM A105, ASME B16.5 Slip-On 1/2-24 Class 150 RF CS, ASTM A105, ASME B16.5 Weld Neck 13 1/2-24 Class 150 RF CS, ASTM A105, ASME B16.5 Weld Neck 11, 13 1/2-24 Class 150 FF CS, ASTM A105, ASME B16.5 Weld Neck 12, 13 1/2-24 Class 300 RF CS, ASTM A105, ASME B16.5 Weld Neck Class 150 RF CS, ASTM A105, ASME B16.47 Series B Weld Neck Class 150 RF CS, ASTM A105, ASME B16.47 Series A Pair WN Orifice 2-24 Class 300 RF CS, ASTM A105, ASME B16.36, SW taps GASKETS 14 1/2-24 Class 150 Low stress spiral wound type 304 SS, w/ flexible graphite filler, w/ 304SS inner ring and CS outer ring, ASME B Class 150 Low stress spiral wound type 304 SS, w/flexible graphite filler, w/304 SS inner ring and CS outer ring, ASME B16.20, ASME B16.47 Series B dimensions Low stress spiral wound type 304 SS, w/flexible graphite filler, w/304 SS inner ring and CS outer ring, ASME B16.20, ASME B16.47 Series A dimensions 1/2-24 Class 300 Spiral wound type 304 SS,w/ flexible graphite filler, w/ 304SS inner ring and CS outer ring, ASME B16.20 BOLTING Stud Bolts Cap Screws ASTM A193, Gr B7 stud w/2 heavy hex nuts ASTM A194, Gr 2H ASTM A193, Gr B7 heavy hex 90 BRANCH CONNECTION Legend and Chart BRANCH SIZE 48 T 42 E T 36 E E T 30 E E E T 24 E E E E T 20 W E E E E T 18 W W E E E E T 16 W W W E E E E T 14 W W W W E E E E T 12 W W W W W E E E E T 10 W W W W W W E E E E T 8 W W W W W W W E E E E T 6 W W W W W W W W E E E E T 4 W W W W W W W W W W E E E T 3 W W W W W W W W W W W E E E T 2 W W W W W W W W W W W W W E E T 1½ W W W W W W W W W W W W W W W W T 1 W W W W W W W W W W W W W W W W E T 3/4 W W W W W W W W W W W W W W W W E E T 1/2 W W W W W W W W W W W W W W W W E E E T ½ 1 3/4 1/2 HEADER SIZE E Reducing Tee T Tee W Weldolet (Note 05) Process Industry Practices Page 2 of 3

5 NOTES: 01 If a pipe schedule is shown under "SCH/RAT," it shall be adequate for the full flange rating. If "CALC" is shown, the pressure limit may be lower than full flange rating. 02 All butt-welded component thicknesses shall match the pipe thickness. 05 Weld thickness of integrally reinforced branch connections shall be checked to determine if PWHT is required. 07 These valves have no flanges but are installed between line flanges with extra-length bolts. 08 Full-port valves shall be used if indicated on the P&ID. 09 Pressure and temperature rating can be limited by certain components permitted by this Practice. Manufacturer's recommended pressure-temperature restrictions shall be consulted. 11 Flat-face flanges shall be provided adjacent to flat-face equipment nozzles. 12 These flanges shall be used only to match Class 300 flange connections at control valves and special equipment. 13 Weld-neck flanges shall be used against butt-weld fittings. Otherwise, slip-on flanges shall be used. 14 Full-face gaskets shall be used at flat-faced flanges. 26 To be used only if indicated on the P&ID. 53 To be used where required for pipe supports, dummy legs and unused socketweld taps. 59 Branch weld shall be used with reinforcement pad if the minimum wall thickness (specified or measured) of the header at the branch location exceeds xxx where xxx equals the wall thickness value for the letter symbol shown in the legend. Full encirclement reinforcement (length equals twice branch pipe OD) shall be used if the wall is less than or equal to xxx. 61 These check valves shall be installed in a horizontal position with cover up. 62 These check valves shall be installed in a horizontal position with cover up or in a vertical position with upward flow. 63 These check valves shall be installed in a horizontal position with hinge pin vertical or in a vertical position with upward flow. 170 These items should be qualified for use in this specification in accordance with ASME B31.3, Paragraph These flanges shall be used only with Series A flanged connections. 178 Use cap screws for valves or flanges containing tap holes. It is recommended that cap screws be supplied by valve supplier/manufacturer to ensure proper length for all taps. REFERENCES: Process Industry Practices (PIP) PIP PNF0200 Vents, Drains, and Instrument Connection Details PIP PNSMV003 Carbon Steel Gate Valve Descriptions PIP PNSMV004 Carbon Steel Globe Valve Descriptions PIP PNSMV005 Carbon Steel Check Valve Descriptions PIP PNSMV006 Carbon Steel Ball Valve Descriptions PIP PNSMV007 Carbon Steel Butterfly Valve Descriptions PIP PNSMV008 Carbon Steel Plug Valve Descriptions Process Industry Practices Page 3 of 3