C&N Industrial Group Limited. Better Pipeline, Better Connection.
|
|
- Alyson Todd
- 5 years ago
- Views:
Transcription
1 C&N Industrial Group Limited Better Pipeline, Better Connection.
2 About C&N Flange & Fitting producing Steel pipe expand & Welding Pipe accessories(jiangsu) Pipeline technology consult
3 Incorporate on C&N Industrial Group limited Shanghai C&N Industrial Group limited Jiangsu C&N Pipeline accessories Co.,ltd Hebei Sanxin Pipe Fittings Share Co., Ltd Dingxiang Feida Forging Co., Ltd Dingxiang C&N Huarui Forging Co., Ltd
4
5 Sales Team
6 Structure
7 Certified by ISO 9001:2008 ISO4001 PED, CE, Ormat, PDVSA Certifications
8 Production range Butt weld Fittings Buttweld Cap Buttweld End Cap Buttweld Dish End Buttweld Laterals Buttweld 45 Deg Elbow 45 Deg. Elbow 90 Deg. Elbow 180 Deg. Elbow Long Radius Elbow Short Radius Elbow Buttweld Barrel Nipple Buttweld Barrel Nipple Buttweld Pipe Nipple Buttweld Swage Nipple Buttweld Reducer Buttweld Concentric Reducer Buttweld Eccentric Reducer Buttweld Stubend Buttweld Long Stubend Buttweld Short Stubend Buttweld Tee Buttweld Barred Tee Buttweld Equal Tee Buttweld Reducing Tee Buttweld Unequal Tee 3D Bend 5D bend Hot Bend Long Radius Bend Dimension: Up to 30 inch in seamless Up to 120 inch in weld (SAW) Forged Fittings Forged Elbow 45 Degree Elbow 90 Degree Elbow Socket Weld Elbow Threaded Elbow Forged Tee Forged Cross Tee Forged Coupling Forged Plug Forged Bushing Forged Boss Forged Nipple Forged Union Elbolet Letrolet Nipolet Outlets Sockolet Sweepolet Thredolet Weldotlet Dimension: Up to 6 inch, Pressure up to CL9000 Flanges Weld Neck Flanges Socket Weld Flanges Slip On Flanges Screwed Flanges Long Weld Neck Flanges Lapped Joint Flanges Reducing Flanges Spectacle Blind Flanges Threaded Flanges Forged Flanges Customized flanges Orifice Flanges Dimension: Up to 60 inch according to ASME B16.5, ASME B Pressure up to CL3000 Pipes & Tubes Alloy Steel Pipes Alloy Steel Tubes Carbon Steel Pipes Carbon Steel Tubes Copper & Brass Tube Copper Nickel pipe Copper Nickel Tube Duplex Steel Pipes Duplex Steel Tubes Stainless Steel Pipes Stainless Steel Tubes Dimension: Stainless OD 3MM to 24inch in seamless, Carbon steel 1/8in to 30 inch in seamless Valves Gate Valve Ball Valve Globe Valve Check Valve Forged Steel Valve Butterfly Valve Plug Valve Strainer Valve Sanitary Valve Dimension: Size from 1/2" to 88", Pressure: CL150 to CL2500
9 Factory Capacity
10 Factory
11 Carbon steel fitting capacity Seamless steel pipe fitting tee press below 24inch, weld pipe fitting tee 24in to 120 in by SAW(with NDE test). Seamless tee Stock 4in to 24in SAW weld tee Tee mould
12 Stainless steel fitting capacity Seamless steel pipe fitting tee press below 24inch, weld pipe fitting tee 24in to 120 in by SAW(with NDE test). Specialized in duplex 31803,32750, duplex fitting. Seamless tee Stock 4in to 24in SAW weld tee Tee mould
13 Forge pipe fitting Forge pipe fitting below 6inch, standard comply with ASME B16.11, MSS SP95, MS SSP97,Bonney company standard etc.
14 Flange capacity
15 Seamless steel pipe Baotou steel capacity Workshop Equipment Quality inspection
16 Weld steel pipe ERW weld pipe below 24inch, SAW pipe up to 120inch, Auto online NDE test line. NDE test Packing Inner support
17 Stainless steel pipe Specialized in small diameter precision cold drawn pipe, OD3mm,4mm,5mm,6mm.
18 Aluminum products Surface processing, shearing, sawing, cutting, welding, bending and other Customized fabrication, stock common sizes coil, sheet, angle, H-beam etc. C&N hot selling Aluminum alloy flange and fitting in B ,5086,6061,7075, Free sample available!!!
19 Aluminum products
20 Fastener and gasket Hex Bolts, Stud Bolts, Anchor Bolts, Expansion Bolts, Eye Bolts, Threaded Rods Spiral wound gasket, Ring joint gasket, Graphite gasket.
21 Valves Gate Valve Ball Valve Globe Valve Check Valve Forged Steel Valve Butterfly Valve Strainer Valve
22 Quality Inspection and Testing Procedures
23 List of quality documents No. Description Standard Remark 1 Quality Manual System ISO Annexure 2 Material Test Certificate EN Annexure 3 Heat treatment specifications ISO,DIN,ASTM norm Annexure 4 Inspection and test plan ISO Annexure 5 Calculation Notes ASME VIII Annexure 6 Detail plan of manufacturing ISO Annexure 7 Non destructive of inspection report EN PT, ET, UT, MT,RT 8 Dimension test report EN Annexure 9 WPS welding procedure(pqr,wpqr) ASME Annexure 10 Intergranular Corrosion test report ASME A213 for stainless
24 Third-party inspection Experienced TUV, SGS, LR, DNV, BV, VELOS, TechWheel, CICC inspection
25 TUV inspection Annual inspection contract with TUV, Each order with free TUV sample test for alloy material, bronze, aluminum.
26 R&D Innovation Product research Company management Customer service improving case Our company have many years design and produce pressure equipment's according customer requires. Our engineer team skilled in Pro-e,UG,CAD,Rhino design.
27 R&D Innovation
28 R&D OD 6in SA193 B16 stud bolt
29 CNC machining parts
30 CNC machining parts
31 CNC machining parts
32 Customized pressure vessel
33 Customized pipe fitting
34 Customer Service procedure documents Online response OEM service Needs concern Service team As a sales, just remember every customer negative remark. Better connection means smooth communicate, free hassle, customer satisfy is the mission., Sales dept
35 Advantage Integration steel market Steel manufacturer Raw material supplier Stock market The partners It benefits the price competitive, quality assurance, on time solution.
36 Qualified supplier for top 500 BAOSTEEL TAINDA GROUP TPCO TISCO BAOTOU STEEL TSINGSHAN CHENGDE XINYU Our products have been exported to over 60 countries, covering six continents ( see more details from C&N market region and project list reference list).
37 Reputation customer Our products have been exported to over 60 countries, covering six continents ( see more details from C&N market region and project list reference list).
38 Reputation customer
39 C&N exhibition Tube 2016,Shanghai,China Tube.de 2016 Germany
40 C&N exhibition Tube 2010,Shanghai,
41 C&N Customer Venezuela Australia New zeland Germany
42 C&N Customer Australia Venezuela South Africa Egypt
43 C&N Customer Thailand India Dubai.UAE Vietnam
44 C&N Customer U.K Pakistan Australia
45 C&N Customer Algeria India Pakistan Tanzania
46 - Customer survey - Customer tailor-made products Remark for C&N procedure production schedule, shipping schedule, Quality performance. Response schedule.. C&N value your remark, any feedback from you is highly appreciated. Sales dept.
47 C&N INDUSTRIAL GROUP LIMITED Sales Department Tel: Fax: Web: Address:Building 28,Lane 2190,Nanlu Road,Pudong,ShangHai. Welcome learn us more from Thanks!
Xiamen Landee Industries Co., Ltd was founded on 14th May 2001;
ABOUT US Xiamen Landee Industries Co., Ltd was founded on 14th May 2001; Our main products are OCTG, Heat Exchanger Tube, Plate, Pressure Vessel, Line Pipe, Valve, Flange, Fitting, Gasket, Fastener, etc;
More informationA GUIDE TO PIPE SIZES
A GUIDE TO PIPE SIZES Pipe Strengths To identify the dimensions and strengths of different pipe, it is common to use schedule terminology taken from the ANSI pipe schedule chart. The pipe schedule chart
More informationTotaiyo Steel Industry トタイヨ 鉄鋼業界. Manufacturers of Pipe Fittings
Y IS R QUALIT AS O D 'S RE G TE L LY S U RA NC E ISO Totaiyo Steel Industry トタイヨ 鉄鋼業界 Manufacturers of Pipe Fittings 900 PROFILE The Company TOTAIYO is the brand name of the flange, fittings manufacturing
More informationDuplex Steel & Engineering Company
+91-8048601907 Duplex Steel & Engineering Company https://www.duplexsteel.net/ Incorporated in the year 1996, we at Unisteels and Engg. Co. Pvt. Ltd. are engaged in exporting, supplying variety of Super
More informationPiping Material Specification - Piping class : CS101
Piping Material Specification - Piping class : CS101 SERVICE PROCESS (NG) BASIC MATERIAL CARBON STEEL RATING CLASS 150#, ASME B 16.5 DESIGN CODE ASME B 31.3 DESIGN TEMPERATURE NOMINAL CORROSION ALLOWANCE
More informationPIP PN01CS2S01 Piping Material Specification 1CS2S01 Class 150, Carbon Steel, Socket Weld, 0.125" C.A., Process
May 2016 Piping PIP PN01CS2S01 Piping Material Specification 1CS2S01 Class 150, Carbon Steel, Socket Weld, 0.125" C.A., Process PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the
More informationDirect Mount Packages
800.783.7836 Direct Mount Packages BEV9 Actuated package Size range: 1/ - Pressure rated for 1000 WOG 316 Stainless steel construction Live loaded stem seal design Full Port Threaded Ends (F) EZ99 Actuated
More informationPIPES, PIPE FITTINGS VALVES & FLANGES
PIPES, PIPE FITTINGS VALVES & FLANGES 2 About the Company Atlas Commercial Company (Kwt.) W.L.L was established in 1962, and is part of the Boodai group of companies. Atlas is one of the oldest companies
More informationExcel Metal & Engg Industries
+91-8048077466 Excel Metal & Engg Industries https://www.excel-metal.com/ We are one of the eminent & influential manufacturer, exporter & trader of an exclusive assortment of the products to our valued
More information- Seamless pipe, Welded steel pipe - Standard: ASME/JIS/DIN.
CARBON STEEL PIPES STAINLESS STEEL PIPES - Seamless pipe, Welded pipe (ERW), Spiral welded pipe. - Seamless pipe, Welded steel pipe - Standard: ASME/JIS/DIN. - Standard: ASME/JIS - Material: ASTM A53/A106
More informationPIP PN01CA1S01 Piping Material Specification 1CA1S01 Class 150, Impact Tested Carbon Steel, Socket Weld, 0.063" C.A., Process
December 2017 Piping Piping Material Specification 1CA1S01 Class 150, Impact Tested Carbon Steel, Socket Weld, 0.063" C.A., Process PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize
More informationQuality, Safety and Environment
Quality, Safety and Environment Global Valve Center B.V. is an independent, internationally operating, modern, flexible and service-oriented organization with over forty years of experience and expertise
More informationSTANDARDS and SPECIFICATIONS
ANSI (American National Standards Institute) ANSI B31.4 - Liquid petroleum transportation piping system. ANSI B31.4 - Gas transmission and distribution piping system. API (American Petroleum Institute)
More informationflowconme Types of Fittings Available Wall Thickness Sch 5 - Sch 160 (Sch 5s - Sch 160s) Others available upon special request
FITTINGS Overview Types of Fittings Available 45, 9 Elbows, 18 Returns (Short & Long Radius) Tees & Crosses (equal & reducing), Reducers (concentric & eccentric), Caps, Stud Ends, Weldolets, Outlets, Laterals
More informationDRAWING INDEX 1 07/01/2013. Company Project Project Number Location Revision Date
DRAWING INDEX Company Project Project Number Location Revision Date LEGACY OIL & GAS INC. PIERSON PILINE TO EOG 12069 VARIOUS LSD ISSUED FOR APPROVAL January 4, 2013 Drawing No. Client No. Description
More informationAnu Industries.
+91-8046027525 Anu Industries https://www.anuindustries.net/ To cater the diverse demands of our client base, we are manufacturing, supplying and exporting a wide array of Precision Components & Accessory.
More information6. Butterfly Valves & Accessories
1. Plastic Pipes 2. Steel Pipes 3. Penetration Tubes 4. Piping Accessories 5. Needle Valves 6. Butterfly Valves & Accessories 7. Miscellaneous Valves 7 1. PLASTIC PIPES TYPES OF PLASTIC PIPES ADAPTATOR
More informationButtweld. Pipe Fittings NOTE: ANSI B16.9, MSS-SP-43
Buttweld Pipe Fittings NOTE: ANSI B16.9, MSS-SP-43 Buttweld fittings in duplex and other special alloys are available from stock and throughout our worldwide network of suppliers. and eccentric reducers,
More informationLATEST ARRIVALS CATALOGUE STOCK
LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL
More informationPIP PN01CS1B02 Piping Material Specification 1CS1B02 Class 150, Carbon Steel, Butt Weld, C.A. Process
March 2016 Piping PIP PN01CS1B02 Piping Material Specification 1CS1B02 Class 150, Carbon Steel, Butt Weld, 0.063 C.A. Process PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the
More informationFLANGE. Flanges used for
FLANGE FLANGE Flanges with rating class designations 150, 300, 400, 600, 900, 1500, and 2500 in sizes NPS 1 2 through NPS 24 ASME B16.5: Pipe Flanges and Flanged Fittings (NPS 24 ) ASME B16.47: NPS 26
More informationCopper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10)
Offshore OSNA -10 Copper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10) KME Germany GmbH & Co. KG Offshore OSNA -10 [GB] Content KME - The Company 1 The Material 2 Offshore Product Range 3 Pipes
More informationInte rated. Piping. Manufacturer & Exporter: A Government of India Recognized Star Export House PIPES TUBES ROUND BAR PLATES SHEETS
ISO 9001-08 ISO 14001-04 OHSAS 18001-07 PE-97/23/EC Certified Company RINA M A R I N E Approved Manufacture PIPES UBES ROUN BAR PLAES SHEES Inte rated Manufacturer & Exporter: A WORL OF FERROUS & NON -
More informationALUMINUM DISTRIBUTING, INC S.W. 2nd Ave. Ft. Lauderdale, FL Table of Contents
Table of Contents Page 2.........Equal & Unequal Angle Structural & Architectural Page 3.......................Flat Bar Structural Page 4.....................Flat Bar Architectural Page 5..... U Channel,
More informationIY-LOK KOREA Always Together, Always Success since 1993 Products Qualified on UAE BNPP Nuclear Power Plant
www.ihsungtech.co.kr IY-LOK KOREA Always Together, Always Success since 1993 Products Qualified on UAE BNPP Nuclear Power Plant Lead the Innovation, Since 1993 Always Together, Always Success Company Profile
More informationSERVICE QUALITY RELIABILITY FLEXIBILITY
SERVICE QUALITY RELIABILITY FLEXIBILITY About us: AFS Fittings Service Achim GmbH&Co.KG stands for service solutions for pipe works since 1984. In our own production facility we are aiming to fulfill technically
More information+91-8048078009 Kanti Enterprises http://www.kantienterprises.in/ We are amongst the leading Manufacturers, Exporters and Suppliers of this impeccable range of Products like Pipes & Tubes, Flanges, Pipe
More informationSTAINLESS STEEL FITTINGS AND VALVES
STAINLESS STEEL FITTINGS AND VALVES RHEINMAIN FITTINGS STAINLESS STEEL SCREWED FITTINGS EG 23 A / G-33 Weld nipple /8" 6", thread EN 0226, ISO 7- Standard and special length Material 36/304 36Ti/32 EG
More informationPRESSURE GAUGES DIAL THERMOMETERS PRESSURE & TEMP. SWITCHES PRESSURE & TEMP. TRANSMITTERS PIPES, PIPE FITTINGS & FLANGES
WATER METERS VALVES & COCKS PRESSURE GAUGES DIAL THERMOMETERS PRESSURE & TEMP. SWITCHES PRESSURE & TEMP. TRANSMITTERS PIPES, PIPE FITTINGS & FLANGES FILTER, REGULATOR & LUBRICATORS W IKA V I INSTRUMENTS
More informationPIP PN01SD0B03 Piping Material Specification 1SD0B03 Class 150, 316/316L Stainless Steel, Butt Weld, C.A., Process
May 2016 Piping Piping Material Specification 1SD0B03 Class 150, 316/316L Stainless Steel, Butt Weld, 0.000 C.A., Process PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost
More informationDK-LOK Hydraulic Pipe Fittings
Class 2000, 3000, 6000, 9000 fittings Catalog No. C-2 June 2012 DK-LOK Hydraulic Pipe Fittings are designed and manufactured to the following standards. ASME B 16.11-2005: Forged fittings, Socket-welding
More informationPPF PIPE FITTINGS (PAHANG) BUTTWELD FITTINGS
PPF PIPE FITTINGS (PAHANG) BUTTWELD FITTINGS 1 Pahang Pipe Fittings PPF is one of the leading manufacturers of Buttweld fittings and flanges. Our highly specialized product range is capable of catering
More informationSpecification for: Merck. Project: Caustic Tank. Elkton, VA. Title PIPING SPECIFICATIONS. Jacobs Project No. 63PZ0234. Client Number.
Specification for: Merck Project: Caustic Tank Elkton, VA Document No: 63PZ0234-B-SP-15101SP101S Title PIPING SPECIFICATIONS Jacobs Project No. 63PZ0234 Client Number. Jacobs Discipline Lead Jacobs Project
More informationMANUFACTURING SPECIFICATION
Swage Nipples, Bull Plugs & Oil Country Fittings Catalogue SWAGE NIPPLES, BULL PLUGS, OIL COUNTRY FITTINGS, COUPLINGS, LOW TEMP & STAINLESS SWAGES MANUFACTURING SPECIFICATION CSP Products Ltd, manufactures
More informationIN-LINE DISC & PISTON VALVES
ID & IP Series IN-LINE DISC & PISTON VALVES PROCESS VALVES IN-LINE DISC & PISTON VALVES M Seal In-Line Piston Valve Code: IPYM Large valves utilize a non-rising stem to minimize overall length Live loaded
More informationCopper-Nickel Seawater Piping Systems Offshore product range: Pipes, fittings and flanges of OSNA 10
Copper-Nickel Seawater Piping Systems Offshore product range: Pipes, fittings and flanges of OSNA 10 KME Germany AG & Co. KG OSNA 10 [GB] Member of the KME Group Contents Your Partner KME The Material
More informationScope supplies stainless steel, aluminum, steel, and alloy steel, brass, copper, bronze, titanium, nickel alloys, and engineered plastics products.
STAINLESS STEEL Scope Metals Group is a leading distributor and supplier of finished and semi-finished metals products and engineered plastics products to industrial manufacturers. With an extensive inventory
More informationHAITIMA CORPORATION. Since Reliable, Responsible, Customer-Oriented. Professional Manufacturer Industrial Valves, Actuators, Fittings
HAITIMA CORPORATION Professional Manufacturer Industrial Valves, Actuators, Fittings Reliable, Responsible, Customer-Oriented Since 1984 HAITIMA Branches HAITIMA Taipei, Taiwan - Sales Office HAITIMA Tainan,
More informationFLANGES PRODUCT: STANDARD FLANGE CLASSIFICATION: PRESSURE CLASS CLASIFICATION:
FLANGES Gestión de Compras manufactures and supplies flanges according to standards ANSI, BS, DIN, JIS and ISO as well as according to customer specifications. PRODUCT: Flanges are a pipe fitting which
More informationGENERAL-SERVICE COMPRESSED-AIR PIPING SECTION GENERAL-SERVICE COMPRESSED-AIR PIPING PART 1 - GENERAL
13686.00 GENERAL-SERVICE COMPRESSED-AIR PIPING 221513-1 SECTION 22 1513 - GENERAL-SERVICE COMPRESSED-AIR PIPING 1.1 RELATED DOCUMENTS PART 1 - GENERAL A. Drawings and general provisions of the Contract,
More informationGate Valve (Model 1000)
Gate Valve (Model 1000) s: - 2 to 24 (50mm to 600mm) Rating: - Class 150 to Class 2500 Cast Steel Valves Flange End But-Weld End Information:- www.invacovalves.com sandesh@invacovalves.com invacovalves@gmail.com
More informationA. American National Standards Institute: 1. ANSI Z Relief Valves for Hot Water Supply Systems.
SECTION 220523 - PLUMBING VALVES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Ball valves. 2. Butterfly valves. 3. Swing check valves. 4. Spring loaded check valves. 5. Water pressure reducing
More informationA. This Section includes piping and related specialties for general-service compressed-air systems operating at 150 psig or less.
SECTION 221513 - COMPRESSED-AIR PIPING PART 1 - GENERAL 1.1 SUMMARY A. This Section includes piping and related specialties for general-service compressed-air systems operating at 150 psig or less. 1.2
More informationID & IP SERIES IN-LINE DISC AND PISTON VALVES
ID & IP SERIES IN-LINE DISC AND PISTON VALVES IN-LINE DISC AND PISTON VALVES M SEAL IN-LINE PISTON VALVE CODE: IPYM Large valves utilize a non-rising stem to minimize overall length Live loaded packing
More informationAMARSONS PIPETECH. Piping Solutions ME CO LLC SUPPLIERS OF ELECTRICAL, ELECTRO MECHANICAL & PIPING MATERIALS
AMARSONS PIPETECH ME CO LLC SUPPLIERS OF ELECTRICAL, ELECTRO MECHANICAL & PIPING MATERIALS Piping Solutions Email : info@amarsonspipetech.com Web : www.amarsonspipetech.com Company Overview About Us AMARSONS
More informationFLANGES & GASKETS. ITEM No. QTY. DESCRIPTION SIZE MATERIAL MASS (kg) 1 1 FLANGE RFWN - DN # Sch 80 DN100mm 300# Sch 80 A
FLANGES & GASKETS Most of the flanges have intelligent custom properties built into their design tables (making extensive use of the concatenate function) to populate your Bills of Materials (example below).
More informationFull Traceability. Material Specification. Raw Material Code. Heat Treatment
All J.B. Smith swages, bull plugs, tubing and casing nipples, and chambers are traceable to the original mill test report. To ensure traceability, all fittings are steel stamped as follows: Material Specification
More informationPIP PN03SA0B01 Piping Material Specification 3SA0B01 Class 300, 304/304L Stainless Steel, Butt Weld, C.A., Lube Oil & Seal Oil
May 2016 Piping PIP PN03SA0B01 Piping Material Specification 3SA0B01 Class 300, 304/304L Stainless Steel, Butt Weld, 0.000 C.A., Lube Oil & Seal Oil PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an
More informationDIN Hygienic Union & Fittings
DIN 11851 Hygienic Union & 11852 Fittings The DIN 11851 union is widely used throughout Europe and the Middle East and incorporates a round slotted nut and D Section seal, as standard. The union is manufactured
More informationPISTON DIVERTER VALVES
DP Series DIVERTER VALVES PISTON DIVERTER VALVES PROCESS VALVES STRAHMAN DEAD SPACE FREE DIVERTER VALVES Piston Diverter Valves Code: DPS4 Standard branch angles: 45 o and 90 o 60 o and specific angles
More informationL&T VALVES BUSINESS GROUP A
Larsen & Toubro Limited (L&T) is a US $ 5 billion engineering and construction company, with a strong presence in manufacturing, services and Information Technology. L&T was founded in 1938 by two Danish
More informationPIP PN01SV0S01 Piping Material Specification 1SV0S01 Class 150, Alloy 254 SMO (UNS S31254), Socket Weld, C.A., Process (PTFE Packing/Gaskets)
May 2016 Piping PIP PN01SV0S01 Piping Material Specification 1SV0S01 Class 150, Alloy 254 SMO (UNS S31254), Socket Weld, 0.000 C.A., Process (PTFE Packing/Gaskets) PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES
More informationKIRA VALVES & ENGINEERING
KIRA VALVES & ENGINEERING Who we are Mission Statement To exceed our customer s expectations in quality, delivery and cost, through continuous improvement and customer interaction Kira Valves & Engineering,
More informationYogendra Enterprise.
+91-8048601603 Yogendra Enterprise https://www.indiamart.com/yogendraenterprise/pdf1.html Distributor, Suppliers and Traders of Galvanized Pipe fittings, Seamless MSL JSL pipe, Stainless Steel Pipe fittings,
More informationCARBON STEEL PIPE - BUTTWELD
010-1 CARBON STEEL PIPE - BUTTWELD WEIGHT BLACK GALVANIZED FUSION BOND SIZE LBS/FT T & C P.E. T & C P.E. 1/8" 0.24 8.00 6.09 16.40 14.28 1/4" 0.42 9.61 8.25 15.27 12.91 3/8" 0.57 10.98 9.52 16.91 14.39
More informationENGINEERING FOR EXCELLENCE
ENGINEERING FOR EXCELLENCE Design, Construction & Instalation of Pressure Vessel /Pressure Piping built According to ASME Boiler & Pressure Vessel Code Sec. VIII Div. 1 and ASME / ANSI B31.1 / B31.3 Storage
More informationSection 7. Socket Weld and Threaded Fittings. Socket Weld and Threaded Fittings 7-1
Section 7 Socket Weld and Threaded Fittings This Section contains dimension and tolerance information extracted from American and British specifications applicable to socket weld and threaded fittings.
More informationForged steel socket Welding fittings 6 ~ 13. Forged steel threaded fittings 14 ~ 20. Forged steel outlet fittings 21 ~ 23
Forged steel socket Welding fittings 6 ~ 13 Forged steel threaded fittings 14 ~ 20 Forged steel outlet fittings 21 ~ 23 Standard threads specifications 24 ~ 25 Comparison of astm specifications and similar
More informationTRUNNION MOUNTED METAL SEATED BALL VALVES
TRUNNION MOUNTED METAL SEATED BALL VALVES HIGH PERFORMANCE BALL VALVES FOR SEVERE SERVICES PROCESS VALVES STANDARD FEATURES FOR SIDE ENTRY & BOTTOM ENTRY DESIGN 1. Trunnion Mounted The ball is trunnion
More informationVD SERIES VESSEL & REACTOR VALVES DISC VALVES
VD SERIES VESSEL & REACTOR VALVES DISC VALVES FULL FLOW BOTTOM OUTLET VALVES TANK BOTTOM DISC VALVE CODE: VD4R-VD6R M Ring for high temperature and vacuum. Other sealing systems are available Optional
More informationAs an ISO certi ed organization, our dedicated team ensures each client is provided with cost-effective and highest quality products and services.
COMPANY PROFILE 2 As an ISO certi ed organization, our dedicated team ensures each client is provided with cost-effective and highest quality products and services. Oil and Gas companies require a high
More informationOne Company, Three Businesses,Your Complete Solution! Product and Service Catalogue NSF61 G-372
One Company, hree usinesses,your Complete Solution! Product and Service Catalogue NSF61 G-372 arwick inc. he D Piping Group Over View... 1-1 SM 778 & 774 Suary of Specification... 2-1 Pipe... 2-2 90 Elbows...
More informationSEAMLESS & WELDED PIPE
SEAMLESS & WELDED PIPE SPECIFICATIONS: LENGTHS: ASTM A312M-08 6.1 METRE/RANDOMS FINISH: WELDED ANNEALED & PICKLED SEAMLESS COLD FINISH/HOT FINISH NB PIPE SIZE SIZE WELDED SEAMLESS APPROX. WGT Inch mm O.D.
More informationPD2CAEPIPE - Plant Design-to- CAEPIPE Translator. (for Aveva s PDMS)
PD2CAEPIPE - Plant Design-to- CAEPIPE Translator 1.0 Installing Program (for Aveva s PDMS) To install PD2CAEPIPE on Windows OS, load the product CD supplied by InfoPlant and execute the followings steps:
More informationSECTION GENERAL-DUTY VALVES FOR HVAC. A. Section includes valves for building services piping.
SECTION 23 05 23 GENERAL-DUTY VALVES FOR HVAC PART 1 - GENERAL 1.1 SUMMARY A. Section includes valves for building services piping. 1.2 REFERENCES A. AGA Z21.22 (American Gas Association) - Relief Valves
More informationCertifications & Approvals
Industrial Certifications & Approvals Matco-Norca is committed to maintaining a high standard of quality for all the products we offer. Most products in this catalog are labeled with a designated approval
More informationThe intelligent stainless steel stock range. Stainless, highly corrosion and heat resistant steels
The intelligent stainless steel stock range Stainless, highly corrosion and heat resistant steels A material grade makes history. Even at the end of the 19th century it was discovered that the corrosion
More informationGO WITH THE FLOW! PRODUCT GUIDE TITAN FLOW CONTROL, INC. TITAN TELEPHONE: YOUR PIPELINE TO THE FUTURE!
TITAN 290 CORPORATE DRIVE LUMBERTON, NC 28358 WWW.TITANFCI.COM TITAN@TITANFCI.COM 910.735.0000 TEL 910.738.3848 FAX TITAN FLOW CONTROL PRODUCT GUIDE GO WITH THE FLOW! TITAN FLOW CONTROL, INC. YOUR PIPELINE
More informationENGINEERING & SERVICES PVT LTD
ENGINEERING & SERVICES PVT LTD www.sankalpenggservices.com CERTIFICATIONS About Sankalp Incorporated in 1996, Sankalp focused in Oil & Gas Field Components, primarily OCTG, Well Head, Drilling and Down
More informationGate, Globe & Check Valves Corrosion-resistant
Gate, Globe & Check Valves Corrosion-resistant ASME Class 0 to 00 " - " (0 mm - 00 mm) API 0, ASME B. L&T Valves Trusted by the industry for over five decades, L&T Valves offers innovative products and
More informationWEDGE & SLAB GATE VALVES
GW & GS Series GATE VALVES WEDGE & SLAB GATE VALVES PROCESS VALVES WEDGE GATE AND SLAB GATE VALVES FOR SPECIAL APPLICATIONS Wedge gate Valves Code: GW2M Hand wheel for small sizes Large size valves have
More informationPLANT KOREA. Contents
Contents 1. Company outline 3. Handling Items 1. Company outline is Trading company & Network between Korean company and Customer. Business Scope: plant equipment / materials business in Korea such as
More informationSECTION COMMON WORK RESULTS FOR FIRE SUPPRESSION. A. Pipe, fittings, valves, and connections for sprinkler systems.
SECTION 210500 - COMMON WORK RESULTS FOR FIRE SUPPRESSION PART 1 GENERAL 1.1 SECTION INCLUDES A. Pipe, fittings, valves, and connections for sprinkler systems. 1.2 RELATED REQUIREMENTS A. Section 099000
More informationDouble Block & Bleed Pipeline Ball Valves Taurus Series
Double Block & Bleed Pipeline Ball Valves Taurus Series General Features Features Designed in accordance with Industry standards i.e. ASME B16.34, ASME B31.3, ASME B16.5, API 6D / ISO 14313 Full Bore Meets
More informationLATEST PRICE LISTS PIPES & TUBES FITTINGS VALVES CONTACT DETAILS: AUTHORISED DISTRIBUTORS of: JINDAL PIPES LTD. MAHARASHTRA SEAMLESS LTD.
LATEST PRICE LISTS 2017 PIPES & TUBES AUTHORISED DISTRIBUTORS of: JINDAL PIPES LTD. MAHARASHTRA SEAMLESS LTD. SANT INDUSTRIAL VALVES FITTINGS VS FORGED FITTINGS C BRAND ISI APPROVED G.I. FITTINGS VALVES
More informationUNITS 1-3 EAGLE WORKS 2 SPRINGCROFT ROAD TYSELEY BIRMINGHAM B11 3EL
UNITS 1-3 EAGLE WORKS 2 SPRINGCROFT ROAD TYSELEY BIRMINGHAM B11 3EL TEL: 0121 778 6001 FAX: 0121 778 6002 EMAIL: sales@astonfittings.com WEBSITE: www.astonfittings.com QUALITY POLICY The directors of Aston
More informationSTEELing Relations. Bhavna Industrial Equipments (P) Ltd.
STEELing Relations www.bhavnametals.com Bhavna Industrial Equipments (P) Ltd. 3550, 1 st Floor, Main Road,(RaviRaj Market) Chawri Bazar, Delhi-110006 (India) sales@bhavnametals.com bhavnametals14@gmail.com
More informationForged Fittings Socket Weld And Threaded
Frged Fittings Scket Weld And Threaded Types Equal tee / Reducing Tee / Full Cupling / Half Cupling / Street Elbw / Bull Plug / Bss / Unin (Male/Female) / 90 Elbw / 5 Elbw / Equal Crss / Reducing crss
More informationForged High Pressure Pipe Fittings
Forged High Pressure Pipe Fittings Forged High Pressure Pipe Fittings Pressure Class Socket Weld Forged Fittings Products Dimension Specifications Pressure Class Threaded Forged Fittings Products Dimension
More informationKS Valves & Pumps. https://www.indiamart.com/ksvalves/
+91-8048602783 KS Valves & Pumps https://www.indiamart.com/ksvalves/ Under the Quality Management Surveillance of ISO 9001-2015 certification, Our organization is placed amongst the distinguished Manufacturers,
More informationHDPE PIPE SYSTEMS PRODUCT CATALOGUE.
HDPE PIPE SYSTEMS PRODUCT CATALOGUE www.acu-tech.com.au This is to certify that: The Trustee for The Morren Family Trust ABN 52 394 633 042 Trading As Acu-Tech Piping Systems 119 Kelvin Road Maddington
More informationForged Fittings. High Technology Valve & Fitting Series
Forged Fittings High Technology Valve & Fitting Series Forged steel socket Welding fittings 6 ~ 13 Forged steel threaded fittings 14 ~ 20 Forged steel outlet fittings 21 ~ 23 Standard threads specifications
More informationHP Air Product line for Defence & Marine Applications
HP Air Product line for Defence & Marine Applications began 20 years ago as a specialty forging company providing custom technical FF solutions in specialty materials to solve our clients most demanding
More informationHVAC Products 2016 EDITION NCI CANADA INC.
HVAC Products 2016 EDITION NCI CANADA INC. YOUR SINGLE SOURCE SOLUTION NCI Canada Inc. is a Canadian National master distributor of high quality valves, fittings, pipes and related products serving residential,
More informationGolden Way Co. Company Profile
Golden Way Co. Company Profile ABOUT GOLDEN WAY Founded in 2006, Golden Way is a reliable supplier of wide range of systems, equipment and material in various fields of businesses and industrial sectors
More informationA. This Section includes natural gas piping, specialties, and accessories within the building.
SECTION 226313 NATURAL GAS PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationCOMPLETE REVISION December Piping
December 2015 Piping Piping Material Specification 3SA0J01 Class 300, 304/304L Stainless Steel, Jacketed Construction, 0.000 C.A. Core: Process Jacket: Steam PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES
More informationPlain Ended Welding Fittings BS 4825 Part 2
Plain Ended Welding Fittings BS 4825 Part 2 Alchem offer a wide range of plain ended weld fittings to suit both hygienic and pharmaceutical applications. These include bends, tees, and reducers, both concentric
More informationWe Are the Worldwide Provider for All Your Valve and Fitting Needs
Product Catalog We Are the Worldwide Provider for All Your Valve and Fitting Needs C&C strives to earn your business by offering an extensive line of high quality products with a proven track record for
More informationCOMPLETE REVISION December Piping
December 2015 Piping PIP PN01SA0J01 Piping Material Specification 1SA0J01 Class 150, 304/304L Stainless Steel, Jacketed Construction, 0.000 C.A. Core: Process Jacket: Steam PURPOSE AND USE OF PROCESS INDUSTRY
More informationABOUT US ABOUT US OUR VISION OUR MISSION CORE VALUES
ABOUT US Our company is led by a professional team, and is equipped with 15 Mobile Service Vans to attend break downs and turnkey jobs on site around the clock all over in UAE. If the volume of work is
More informationSERVICES. Plasma Burning Shearing Sawing To Length Pipe and Tube Cutting Bundle Sawing Galvanizing Custom Processing
PRODUCTS Beam Channel Rail Angle Flat Bar Plate Floor Plate Abrasion Resistant / Wear Plate Sheet Galvanized Sheet Round Bar Square Bar Rectangle / Square / Round Tubing Pipe Cold Roll Expanded Metal /
More informationCOMPANY PROFILE 0045
0045 COMPANY PROFILE INTRODUCTION TO THE COMPANY THE MICROFINISH WAY Microfinish Valves Pvt. Ltd. is a privately owned and managed company specializing in industrial valves for energy, process, and natural
More informationPARTIAL PRODUCT LIST. Carbon Steel Tubes for Boiler & Heat Exchanger: Carbon Steel Pipe for Ordinary Piping: Carbon Steel Pipes for Pressure service:
Carbon Steel Pipe for Ordinary Piping: Carbon Steel Tubes for Boiler & Heat Exchanger: Carbon Steel Pipes for Pressure service: Carbon Steel Pipes for Stucture purposes: Arc welded carbon steel pipes for
More informationINDUSTRIAL PIPE SUPPORTS CATALOGUE
INDUSTRIAL PIPE SUPPORTS CATALOGUE DATE PUBLISHED: 1/06/2017 BINDER GROUP INDUSTRIAL PIPE SUPPORT CATALOGUE TABLE OF CONTENTS 1. INTRODUCTION... 4 2. QUALITY MANAGEMENT CERTIFICATE... 5 3. PIPE SUPPORT
More informationA company you can count on...
A company you can count on... About Us Our customers trust us to deliver the right product at the right time, on time, every time. Our business is based on a tradition of service, aiming to be your first
More information26000 litre ISOTANK SPECIFICATION FOR HAZARDOUS CHEMICALS TRANSPORT AND STORAGE SPECIFICATION T11.
26000 litre ISOTANK SPECIFICATION FOR HAZARDOUS CHEMICALS TRANSPORT AND STORAGE SPECIFICATION T11. DESCRIPTION: 26 000 LITRE INSULATED UN PORTABLE TANK, TYPE T11 For transport of product classes 3, 4,
More informationCheck Valve (Model 6000)
Check Valve (Model 6000) s: - 2 to 24 (50mm to 600mm) Rating: - Class 150 to Class 2500 Cast Steel Valves Flange End But-Weld End Information:- www.invacovalves.com sandesh@invacovalves.com invacovalves@gmail.com
More informationThe Amodil Group. Specialists In Stainless Steel Long Products
Specialists In Stainless Steel Long Products Specialists In Stainless Steel Long Products Round Hexagon Flat Square Angle Billet Seamless Pipe & Tube Hollow Bar Fittings Over 5,000 tonnes of Stainless
More informationJUST PIPING, JUST FITTING. A Comprehensive Integrated Solution For Piping Systems
JUST PIPING, JUST FITTING A Comprehensive Integrated Solution For Piping Systems SF 01 DUCTILE IRON PIPE FITTINGS FD1011 FD1021 FD1022 FD1031 FD1102 FD1103 FD1111 FD1121 Double Flanged Piece Flanged spigot
More information