Cast-Iron Valves G101 DI BUTTERFLY VALVE LEVER... 2 G401 CI GLOBE VALVE CL G403 CI GLOBE VALVE PN G103 DI BUTTERFLY VALVE GEAR...
|
|
|
- Aleesha Williams
- 5 years ago
- Views:
Transcription
1 Cast-Iron Valves PAGE G101 DI BUTTERFLY VALVE LEVER PAGE G401 CI GLOBE VALVE CL G103 DI BUTTERFLY VALVE GEAR G403 CI GLOBE VALVE PN G201 CI Y STRAINER CL G501 CI GATE VALVE NRS CL G203 CI Y STRAINER PN G503 CI GATE VALVE NRS PN G301 CI CHECK VALVE CL G505 CI GATE VALVE OS&Y CL G303 CI CHECK VALVE PN G507 CI GATE VALVE OS&Y PN G311 CI WAFER CHECK VALVE G801 CI BALANCING VALVE
2 G 101 DUCTILE IRON BUTTERFLY VALVE WAFER SEMI-LUGGED TYPE WITH LEVER Conforms to MSS SP-67 WAFER SEMI-LUGGED TYPE BUTTERFLY VALVE WITH LEVER END CONNECTION SUITABLE FOR FLANGE CONNECTION ANSI B16.5 CLASS 150 OR PN16 PRESSURE RATING 150 PSI DESIGNED & MANUFACTURED TO MEET MSS SP-67 NOT SUITABLE FOR STEAM SUITABLE MEDIA: FRESH WATER, SEWAGE, SEA WATER, AIR, OIL, ACID & CORROSIVE MEDIA WORKING TEMPERATURE FROM -15 TO +120 C / -5 F TO +249 F DN H H1 H2 Ød n-ød BOLTS L WEIGHT Ø ⅝ - 11UNC Ø ⅝ - 11UNC Ø ⅝ - 11UNC Ø ⅝ - 11UNC Ø ¾ - 10UNC Ø ¾ - 10UNC Ø ¾ - 10UNC Ø ⅞ - 9UNC Ø ⅞ - 9UNC AMERICAN 1 Body Ductile Iron ASTM A Seat EPDM - 3 Disc Stainless Steel SS316 4 Shaft Stainless Steel SS410 European Casting Industry Srl Via D Azeglio Bologna BO, Italia P.Iva: info@ecivalve.it 2
3 G 103 DUCTILE IRON BUTTERFLY VALVE WAFER SEMI-LUGGED GEAR OPERATED Conforms to MSS SP-67 WAFER SEMI-LUGGED TYPE BUTTERFLY VALVE WITH GEAR OPERATION END CONNECTION SUITABLE FOR FLANGE CONNECTION ANSI B16.5 CLASS 150 OR PN16 PRESSURE RATING 150 PSI DESIGNED & MANUFACTURED TO MEET MSS-SP 67 NOT SUITABLE FOR STEAM SUITABLE MEDIA: FRESH WATER, SEWAGE, SEA WATER, AIR, OIL, ACID & CORROSIVE MEDIA WORKING TEMPERATURE FROM -15 TO +120 C / -5 F TO +249 F DN H1 H2 Ød 4-Ød BOLTS L WEIGHT Ø ¾ - 10UNC Ø ¾ - 10UNC Ø ⅞ - 9UNC Ø ⅞ - 9UNC Ø UNC Ø UNC Ø ⅛ - 7UNC AMERICAN 1 Body Ductile Iron ASTM A Seat EPDM - 3 Disc Stainless Steel SS316 4 Shaft Stainless Steel SS410 European Casting Industry Srl Via D Azeglio Bologna BO, Italia P.Iva: info@ecivalve.it 3
4 G 201 CAST IRON STRAINER, Y TYPE CL-125 FLANGED DN SIZE WEIGHT L D D1 B f n-d H INCH ½ PSI/8.6 BAR SATURATED STEAM TO 353 F/178 C 200 PSI/13.8 BAR WOG FROM -10 TO 65 C FLANGE DRILLED CONFORM TO ANSI B16.1 CL 125 FACE TO FACE DIMENSION CONFORMS TO SERIES 1 OF BS EN SUITABLE MEDIA: WATERS, OIL, AIR & STEAM AMERICAN 1 Body Cast Iron ASTM A 126 B 2 Screen Stainless Steel ANSI Bonnet Cast Iron ASTM A 126 B 4 Gasket Graphite Non Asbestos 5 Screw Plug Brass ASTM B584 C Bolt Steel ASTM A 307 European Casting Industry Srl Via D Azeglio Bologna BO, Italia P.Iva: info@ecivalve.it 4
5 G 203 CAST IRON STRAINER, Y TYPE PN16 Flanged DN L D D1 D2 B f n-d H WEIGHT NS 16 BAR FROM -10 TO 120 C, 13 BAR AT 220 C FLANGE DRILLED CONFORM TO BS-EN PN16 FACE TO FACE DIMENSION CONFORMS TO SERIES 1 OF BS EN SUITABLE MEDIA: WATERS, OIL, AIR & STEAM s BRITISH 1 Body Cast iron 1561EN JL Screen Stainless Steel S315 3 Bonnet Cast Iron 1561EN JL Gasket Graphite Non Asbestos 5 Screw Plug Brass Mn Brass 6 Bolt Steel BS979 43A European Casting Industry Srl Via D Azeglio Bologna BO, Italia P.Iva: info@ecivalve.it 5
6 G 301 CAST IRON SWING CHECK VALVE CLASS 125 Conforms to MSS SP PSI/8.6 BAR SATURATED STEAM TO 449 F/232 C 200 PSI/13.8 BAR COLD WORKING PRESSURE FROM -20 F TO 150 F/-29 C TO 66 C TEST PRESSURES HYDRAULIC: BODY: 24 BAR, SEAT: 17.6 BAR DESIGN AND MANUFACTURE CONFORM TO MSS SP-71 FACE TO FACE DIMENSIONS CONFORM TO ANSI B16.10 FLANGE DRILLED CONFORMS TO ANSI B16.1 CLASS 125 SUITABLE MEDIA: WATER, OIL, AIR & STEAM BOLTED COVER SUITABLE FOR MOUNTING IN HORIZONTAL AND VERTICAL PIPELINES (WITH THE FLOW UPWARDS OR IN ANY INTERMEDIATE POSTION) DN SIZE WEIGHT L D D1 B n-d H INCH / AMERICAN 1 Body Cast Iron ASTM A 126 B 2 Seat Ring Bronze ASTM B 62 3 Disc Ring Bronze ASTM B 62 4 Disc Cast Iron ASTM A 126 B 5 Hanger Ductile Iron ASTM A Washer Steel ASTM A Nut Steel ASTM A Split Pin Stainless Steel ANSI Disc Screw Steel ASTM A Side Pin Brass ASTM B584 C Gasket Soft Steel Cardboard - 12 Hanger Pin Stainless Steel ANSI Bonnet Cast Iron ASTM A 126 B 14 Gasket Graphite Non Asbestos 15 Bolt Steel ASTM A Nut Steel ASTM A Identification Plate Aluminum - 18 Pin Stainless Steel ANSI 304 European Casting Industry Srl Via D Azeglio Bologna BO, Italia P.Iva: info@ecivalve.it 6
7 G 303 CAST IRON SWING CHECK VALVE BS PN16 Conforms to BS EN 12334:2001 PRESSURE-TEMPERATURE RATING: BS EN PN16 16 BAR FROM-10 TO 120 C 13 BAR AT 220 C TEST PRESSURES HYDRAULIC: BODY: 24 BAR, SEAT: 17.6 BAR DESIGN AND MANUFACTURE CONFORM TO BS5153 & BS EN 12334:2001 FACE TO FACE DIMENSIONS CONFORM TO SERIES 10 OF BS EN FLANGE DRILLED CONFORMS TO BS EN PN16 SUITABLE MEDIA: WATER, OIL, AIR & STEAM BOLTED COVER SUITABLE FOR MOUNTING IN HORIZONTAL AND VERTICAL PIPELINES (WITH THE FLOW UPWARDS OR IN ANY INTERMEDIATE POSITION) DN L D D1 D2 B n-d f H WEIGHT BRITISH 1 Body Cast Iron 1561 EN JL Seat Ring Bronze 1982 CC491K 3 Disc Ring Bronze 1982 CC491K 4 Disc Cast Iron 1561 EN JL Hanger Ductile Iron BS2789 Gr Washer Steel BS970 43A 7 Nut Steel BS970 43A 8 Split Pin Stainless Steel S315 9 Disc Screw Steel BS970 43A 10 Side Pin Brass Mn Brass 11 Gasket Soft Steel Cardboard - 12 Hanger Pin Stainless Steel S Bonnet Cast Iron 1561 EN JL Gasket Graphite Non Asbestos 15 Bolt Steel BS970 43A 16 Nut Steel BS970 43A 17 Identification Plate Aluminum - 18 Pin Stainless Steel S315 European Casting Industry Srl Via D Azeglio Bologna BO, Italia P.Iva: info@ecivalve.it 7
8 G 311 CAST IRON CHECK VALVE WAFER TYPE ANSI 125 WP & PN 16 Conforms to MSS SP-125 PRESSURE RATING ANSI 125 END CONNECTION SUITABLE FOR FLANGE CONNECTION ANSI B OR EN PN16 USE ONLY FLAT FLANGES AND RING GASKETS FACE TO FACE DIMENSIONS CONFORM TO BS EN 558 SERIES 16 TEMPERATURE OPERATING RANGE -20 TO 120 C SUITABLE FOR INSTALLATION IN VERTICAL AND HORIZONTAL PIPELINES IN VERTICAL PIPELINES, THE FLOW MUST BE IN AN UPWARD DIRECTION NOT SUITABLE FOR STEAM SUITABLE MEDIA: WATER, AIR, OIL, ACID AND CORROSIVE MEDIA AMERICAN 1 Body: Up to to 18 Cast Iron Ductile Iron ASTM A 126 B ASTM A Disc Stainless Steel SS304/SS316 3 Liner EPDM - 4 Shaft Stainless Steel SS410 5 Spring Stainless Steel SS316 European Casting Industry Srl Via D Azeglio Bologna BO, Italia P.Iva: info@ecivalve.it 8 DN SIZE A B C H WEIGHT INCH ½
9 G 401 CAST IRON GLOBE VALVE ANSI CL 125 FLANGED OUTSIDE SCREW & YOKE CONFORMS TO MSS SP-85 OUTSIDE SCREW & YOKE 125 PSI/8.6 BAR FLUID PRESSURE TO 384 F/230 C 200 PSI/13.8 BAR NON-SHOCK COLD WORKING PRESSURE FROM -20 F TO 150 F/ -29 C TO 66 C SUITABLE MEDIA: WATER, OIL, AIR & STEAM DESIGN AND MANUFACTURE CONFORM TO MSS SP-85 FACE TO FACE DIMENSIONS CONFORM TO ANSI B16.10 FLANGE DRILLED CONFORM TO ANSI B16.1 CLASS 125 DN INCH L D D1 n-d B Do WEIGHT KG ½ AMERICAN 1 Body Cast Iron ASTM A 126 B 2 Body Seat Ring Bronze ASTM B 62 3 Disc Seat Ring Bronze ASTM B 62 4 Disc Cast Iron ASTM A 126 B 5 Disc Washer Stainless Steel ANSI Disc Nut Stainless Steel ANSI Stem Stainless Steel ANSI Gasket Graphite Non Asbestos 9 Bolt Steel ASTM A Packing Graphite Non Asbestos 11 Bonnet Cast Iron ASTM A 126 B 12 Gland Flange Ductile Iron ASTM A Nut Steel ASTM A Bolt Steel ASTM A Stem Nut Brass ASTM B584 C Handwheel Cast Iron ASTM A 126 B 17 Handwheel Washer Steel ASTM A Handwheel Nut Steel ASTM A 307 European Casting Industry Srl Via D Azeglio Bologna BO, Italia P.Iva: info@ecivalve.it 9
10 G 403 CAST IRON GLOBE VALVE BS PN16 FLANGED Rising stem Conforms to BS EN 13789:2010 OUTSIDE SCREW & YOKE PRESSURE-TEMPERATURE RATING: 16 BAR AT -10 TO 120 C 12.1 BAR AT 230 C TEST PRESSURES HYDRAULIC: SHELL: 24 BAR, SEAT: 17.6 BAR DESIGN AND MANUFACTURE CONFORM TO BS5152 (BS EN 13789:2010 PN16) FACE TO FACE DIMENSIONS CONFORM TO SERIES 10 OF BS EN FLANGE DRILLED CONFORM TO BS EN PN16 GATE VALVES ARE DESIGNED TO BE IN AN OPEN OR CLOSED POSITION SUITABLE MEDIA: WATER, OIL, AIR & STEAM DN L D D1 D2 n-d B f Do WEIGHT BRITISH 1 Body Cast Iron 1561 EN JL Body Seat Ring Bronze 1982 CC 491K 3 Disc Seat Ring Bronze 1982 CC 491K 4 Disc Cast Iron 1561 EN JL Disc Washer Stainless Steel S315 6 Nut Brass CW603R 7 Stem Stainless Steel S315 8 Flange Gasket Graphite Non Asbestos 9 Bolt Steel BS970 43A 10 Packing Graphite Non Asbestos 11 Bonnet Cast Iron 1561 EN JL Gland Ductile Iron BS2789 Gr Nut Steel BS970 43A 14 Bolt Steel BS970 43A 15 Stem Brass CW603R 16 Handwheel Cast Iron 1561 EN JL Handwheel Washer Steel BS970 43A 18 Handwheel Nut Steel BS970 43A European Casting Industry Srl Via D Azeglio Bologna BO, Italia P.Iva: info@ecivalve.it 10
11 G 501 CAST IRON GATE VALVE ANSI CL 125 FLANGED Non-Rising stem Conforms to MSS SP-70 INSIDE SCREW NON-RISING STEM 125 PSI/8.6 BAR FLUID PRESSURE TO 353 F/178 C 200 PSI/13.8 BAR NON-SHOCK COLD WORKING PRESSURE FROM -20 F TO 150 F/ -29 C TO 66 C SUITABLE MEDIA: WATER, OIL, AIR & STEAM DESIGN AND MANUFACTURE CONFORM TO MSS SP-70 FACE TO FACE DIMENSIONS CONFORM TO ANSI B16.10 FLANGE DRILLED CONFORM TO ANSI B16.1 CLASS 125 GATE VALVES ARE DESIGNED TO BE IN AN OPEN OR CLOSED POSITION DN SIZE L D D1 n-d B Do H WEIGHT INCH KG ½ AMERICAN 1 Body Cast Iron ASTM A 126 B 2 Body Seat Ring Bronze ASTM B 62 3 Wedge Seat Ring Bronze ASTM B 62 4 Wedge Cast Iron ASTM A 126 B 5 Stem Brass ASTM B 16 6 Stem Nut Brass ASTM B584 C Gasket Graphite Non Asbestos 8 Bolt Steel ASTM A Nut Steel ASTM A Bonnet Cast Iron ASTM A 126 B 11 Bonnet Bush Brass ASTM B584 C Packing Graphite Non Asbestos 13 Gland Follower Ductile Iron ASTM A Bolt Steel ASTM A Nut Steel ASTM A Handwheel Cast Iron ASTM A 126 B 17 Washer Steel ASTM A Handwheel Nut Steel ASTM A 307 European Casting Industry Srl Via D Azeglio Bologna BO, Italia P.Iva: info@ecivalve.it 11
12 G 503 CAST IRON GATE VALVE BS PN16 FLANGED Non-Rising stem Conforms to BS EN 1171:2002 PN16 PRESSURE-TEMPERATURE RATING: 16 BAR AT -10 TO 120 C 12.8 BAR AT 200 C TEST PRESSURES HYDRAULIC: SHELL: 24 BAR, SEAT: 17.6 BAR DESIGN AND MANUFACTURE CONFORM TO BS5150 (BS EN 1171:2002 PN 16) FACE TO FACE DIMENSIONS CONFORM TO SERIES 3 OF BS EN FLANGE DRILLED CONFORM TO BS EN PN 16 GATE VALVES ARE DESIGNED TO BE IN AN OPEN OR CLOSED POSITION SUITABLE MEDIA: WATER, OIL, AIR & STEAM DN L D D1 D2 n-d B f DO H WEIGHT BRITISH 1 Body Cast iron 1561 EN JL Body Seat Ring Bronze 1982 CC 491K 3 Wedge Seat Ring Bronze 1982 CC 491K 4 Wedge Cast Iron 1561 EN JL Stem Brass CW603R 6 Stem Nut Brass Mn Brass 7 Gasket Graphite Non Asbestos 8 Bolt Steel BS970 43A 9 Nut Steel BS970 43A 10 Bonnet Cast Iron 1561 EN JL Bonnet Bush Brass Mn Brass 12 Packing Graphite Non Asbestos 13 Gland Follower Ductile Iron BS2789 Gr Bolt Steel BS970 43A 15 Nut Steel BS970 43A 16 Handwheel Cast Iron 1561 EN JL Handwheel Washer Steel BS970 43A 18 Handwheel Nut Steel BS970 43A European Casting Industry Srl Via D Azeglio Bologna BO, Italia P.Iva: info@ecivalve.it 12
13 G 505 CAST IRON GATE VALVE ANSI CL 125 FLANGED Rising stem Conforms to MSS SP-70 OUTSIDE SCREW & YOKE 125 PSI/8.6 BAR FLUID PRESSURE TO 353 F/178 C 200 PSI/13.8 BAR NON-SHOCK COLD WORKING PRESSURE FROM -20 F TO 150 F/ -29 C TO 66 C TEST PRESSURE SHELL 24.1 BAR & SEAT 13.8 BAR SUITABLE MEDIUM: WATER, OIL, AIR & STEAM DESIGN AND MANUFACTURE CONFORM TO MSS SP-70 FACE TO FACE DIMENSIONS CONFORM TO ANSI B16.10 FLANGE DIMENSIONS CONFORM TO ANSI B16.1 CLASS 125 GATE VALVES ARE DESIGNED TO BE IN AN OPEN OR CLOSED POSITION DN SIZE L D D1 n-d B Do H Weight CLOSED INCH KG ½ AMERICAN 1 Body Cast iron ASTM A 126 B 2 Body Seat Ring Bronze ASTM B 62 3 Wedge Seat Ring Bronze ASTM B 62 4 Wedge Cast Iron ASTM A 126 B 5 Stem Brass ASTM B 16 6 Gasket Graphite Non-Asbestos 7 Bolt Steel ASTM Nut Steel ASTM Bonnet Cast Iron ASTM A 126 B 10 Packing Graphite Non-Asbestos 11 Gland Follower Ductile Iron ASTM A Bolt Steel ASTM Nut Steel ASTM Stem Nut Brass ASTM B584 C Handwheel Washer Brass ASTM B584 C Handwheel Cast Iron ASTM A 126 B 17 Handwheel Nut Steel ASTM 307 European Casting Industry Srl Via D Azeglio Bologna BO, Italia P.Iva: info@ecivalve.it 13
14 G 507 CAST IRON GATE VALVE PN 16 FLANGED Rising stem Conforms to BS EN 1171:2002 PN16 OUTSIDE SCREW & YOKE PRESSURE-TEMPERATURE RATING: 16 BAR AT -10 TO 120 C 12.8 BAR AT 200 C TEST PRESSURES HYDRAULIC: SHELL: 24 BAR, SEAT: 17.6 BAR DESIGN AND MANUFACTURE CONFORM TO BS5150 (BS EN 1171:2002 PN 16) FACE TO FACE DIMENSIONS CONFORM TO SERIES 3 OF BS EN FLANGE DRILLED CONFORM TO BS EN PN 16 GATE VALVES ARE DESIGNED TO BE IN AN OPEN OR CLOSED POSITION SUITABLE MEDIA: WATER, OIL, AIR & STEAM DN L D D1 D2 n-d B f DO H CLOSED WEIGHT BRITISH 1 Body Cast Iron 1561 EN JL Body Seat Ring Bronze 1982 CC 491K 3 Wedge Seat Ring Bronze 1982 CC 491K 4 Wedge Cast Iron 1561 EN JL Stem Brass CW603R 6 Gasket Graphite Non Asbestos 7 Bolt Steel Steel 8 Nut Steel Steel 9 Bonnet Cast Iron 1561 EN JL Packing Graphite Non Asbestos 11 Gland Follower Ductile Iron ASTM A Bolt Steel Steel 13 Nut Steel Steel 14 Stem Nut Brass Mn Brass 15 Handwheel Washer Brass Mn Brass 16 Handwheel Cast Iron 1561 EN JL Handwheel Nut Steel Steel European Casting Industry Srl Via D Azeglio Bologna BO, Italia P.Iva: info@ecivalve.it 14
15 G 801 CAST IRON BALANCING VALVE VARIABLE ORIFICE DOUBLE REGULATING VALVE (VODRV) FLANGED TO CLASS 125 OR PN16 CONFORM TO BS 7350 PN16 Y PATTERN GLOBE VALVE SUPPLIED WITH TWO TEST POINTS PROVIDE FLOW MEASURMENT & REGULATION TO BE USED FOR ISOLATING & TO BE REOPENED TO IT S PRE-SET POSITION ACCURACY ± 5% ON ALL SETTING DESIGN & MANUFACTURE CONFORM TO BS 7350 PN16 SUITABLE MEDIUM: WATER WORKING TEMPERATURE: T 120 C Pressure / Temperature Ratings TEMPERATURE ( C) DN FACE TO FACE A (mm) PRESSURE (BAR) -10 to Ratings align with BS EN PN16 (formerly BS 4504) or CL 125 CENTRE-TO-TOP B (mm) WEIGHT Coefficients DN FLOW (Kv) HEADLOSS (K) *Fully open position. PART NAME MATERIAL BRITISH Body Ductile Iron BS2789 GR Bonnet Ductile Iron BS2789 GR Bonnet Gasket Graphite Non Asbestos Disc (All Sizes) Cast Iron EPDM Coated 1561EN JL 1030 Disch Bush Bronze 1982 CC 491K Stem Stainless Steel SS 410 Gland Stainless Steel SS 304 Memory Stop Stainless Steel SS 304 Gland Nut Steel BS970 43A Indicator Set Stainless Steel SS 304 Indicator Finger Bronze 1982 CC 491K European Casting Industry Srl Via D Azeglio Bologna BO, Italia P.Iva: info@ecivalve.it 15
Hattersley Newman Hender Ltd
Product Guide Quality Valves from Hattersley WHEN IT REALLY COUNTS, YOU CAN DEPEND ON HATTERSLEY Hattersley Newman Hender is one of the world s premier manufacturers of cast iron, ductile iron and copper
Cast Iron Valves. Product Information. It s all at Albion
Cast Iron Valves Product Information It s all at Albion ART 77-78 Cast Iron Ball Valve Flanged Ends Flange Mounting PN16 Only ISO 5211 Direct Mount (Not 200mm) Art 77/78 Plated Brass/Stainless Ball BS
CV-SFS4-PN16 SERIES SLIENT CHECK VALVE, GLOBE TYPE FEATURES SPECIFICATIONS PRODUCT IDENTIFICATION SYSTEM PRODUCT DATA
CV-SFS4-PN16 SERIES SLIENT CHECK VALVE, GLOBE TYPE Silent check function Temperature -10 ~ +120 PRODUCT IDENTIFICATION SYSTEM 2 Disc Ductile iron GGG 40 3 Spring Stainless steel SUS304 4 Bush Bronze 1400
KVC VALVES AND PEX FITTINGS
KVC VALVES AND PEX FITTINGS 2011 KVC VALVES & PEX FITTINGS CATALOGUE 2 P a g e Table of contents 1. Cast Steel Valves..4 FIG. 272-CS-15 ( Gate ).....5 FIG. 272-CS-300 ( Gate )......6 FIG. 272-CS-600 (
BS 1452 Gr Gr. 420/ Gr. 420/ AB2 304 C C S S S S16. E mm
WAFER TYPE BUTTERFY VAVE SPECIFICATION FOR BS EN 1092-2 PN10 / PN16 FANGE MOUNTING FACE-TO-FACE DIMENSION TO ISO 5752 / BS 5155 / BS EN 593 EVER / WORM GEAR OPERATOR PRESSURE / TEMPERATURE RATINGS BFV-WB
flowit by Fig. FTBGW-20 Bronze Gate Valve, Non-Rising Stem BS 5154 PN20 Material Specifications Dimensions (mm)
flowit flowit by Bronze Gate Valve, Non-Rising Stem BS 5154 PN20 Fig. FTBGW-20 Designed to BS 5154 Pressure Rating: PN20 Threaded Bonnet End connection: BS21 Taper Threaded (ISO 7) / BS EN10226-2 Shell
Iron Check Valves Illustrated Index
Iron Check Valves Illustrated Index Iron Body Swing Check Valve Bronze Mounted or All Iron 125 lb. SWP 200 lb. CWP Iron Body Swing Check Valve Bronze Mounted 250 lb. SWP 500 lb. CWP Iron Body Silent Check
CONTENTS. Bronze Ball Valve (Threaded) 1. Bronze NRS Gate Valve (Threaded) 2. Bronze RS Gate Valve (Threaded) 3. Bronze Swing Check Valve (Threaded) 4
CONTENTS Bronze Ball Valve (Threaded) 1 Bronze NRS Gate Valve (Threaded) 2 Bronze RS Gate Valve (Threaded) 3 Bronze Swing Check Valve (Threaded) 4 Bronze Globe Valve (Threaded) 5 Bronze Y - Strainer (Threaded)
Henderson Engineers, Inc. SECTION GENERAL DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL REQUIREMENTS
SECTION 220523 - GENERAL DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL REQUIREMENTS 1.1 SUMMARY A. This Section includes general duty valves common to most plumbing piping systems. 1. Special purpose
Valve Selection. 1. Function and service considerations
1. Function and service considerations Valve Selection Selection Valves serve the purpose of controlling the fluids in building services piping. Valves are produced in a variety of design types and materials.
LATEST ARRIVALS CATALOGUE STOCK
LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL
CLASS 400 FORGED BRASS BALL VALVE
CLASS 400 FORGED BRASS BALL VALVE FIG. 214 Screwed body cap, PTFE seats, Blowout-proof stem. Screwed ends to BS 21. Nickel plated body. Chrome plated ball. UNI-FLO NYLON BALL VALVES FIG. 214NS/NB Features:
MADE OF STAINLESS...
MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 50 to 600 mm ( NPS 2" to 24" ) Between Class 150 (PN20) flanges 29 C + 210 C Max Pressure : 20 Bars Specifications : Double eccentric
KNIFE GATE VALVE Product Ref. : KG02W/KG02L
General Description Model KG02 is a bidirectional knife gate valve suitable for most industrial application cases. With one piece body design, it combines robust and economy giving best cost effective
SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
SECTION 220523 - GENERAL-DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
Brass, Bronze, Iron and Stainless Steel Valves
Price Schedule June 1, 2011 Supersedes BIV-01-11 07 Brass, Bronze, Iron and Stainless Steel Valves ASTM B283 FORGED BRASS SCREW-IN BONNET NON-RISING STEM SOLID WEDGE DISC 125 WSP/200 WOG BRONZE GATE VALVES
Materials : Carbon steel or stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 50 to 600 mm Between PN25 or PN16 flanges 29 C + 210 C Max Pressure : 25 Bars Specifications : Double eccentric Wafer type Fire safe according to ISO
Industrial Bronze and Iron Price List
Industrial Bronze and Iron Price List TABLE OF CONTENTS IND-0217 Effective: February 1, 2017 Revised: 12/07/17 Suggested list prices are subject to change without notification. Visit our Website for the
Approved Branded Traceable Fire Protection & Waterworks Valves
Approved Branded Traceable Fire Protection & Waterworks Valves (800) 766-0076 www.smithcooper.com Los Angeles, CA Atlanta, GA Vancouver, WA Chicago, IL AWWA C515 Compliant CONSIDER Your Options Tamper
Industrial Bronze and Iron Price List
Industrial Bronze and Iron Price List TABLE OF CONTENTS IND-0718 Effective: July 2, 2018 Revised: 08/06/2018 Suggested list prices are subject to change without notification. Visit our Website for the
Industrial Bronze and Iron Price List
Industrial Bronze and Iron Price List IND-0318 Effective: March 1, 2018 Revised: 08/06/2018 Suggested list prices are subject to change without notification. Visit our Website for the most up-to-date product
Industrial Bronze and Iron Price List
Industrial Bronze and Iron Price List IND-0718 Effective: July 2, 2018 Revised: 09/24/2018 Suggested list prices are subject to change without notification. Visit our Website for the most up-to-date product
SECTION GENERAL-DUTY VALVES FOR HVAC PIPING. A. Contents of Division 23, HVAC and Division 01, General Requirements apply to this Section.
SECTION 23 05 23 PART 1 - GENERAL 1.1 SUMMARY A. Work Included: 1. Gate Valves 2. Balancing Valves 3. Ball Valves 4. Butterfly Valves 5. Swing Check Valves 1.2 RELATED SECTIONS A. Contents of Division
1.2 REFERENCES.1 American National Standards Institute (ANSI)/ American Society of Mechanical Engineers (ASME)
Issued 2005/06/01 Section 15111 Valves Bronze Page 1 of 6 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01355 Waste Management and Disposal 1.2 REFERENCES.1 American National Standards Institute (ANSI)/
BS 5163 Resilient Wedge Gate Valve
BS 516 Resilient Wedge Gate Valve BS 516 Flanged Resilient OS&Y Gate Valve, Type A, (XZ41X), /16, Gate valves serve to cut the medium flow in the piping system, widely used in the field of potable water,
Materials : Carbon steel or stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 50 to 600 mm Between PN25 flanges - 29 C + 210 C Max Pressure : 25 Bars Specifications : Double eccentric Wafer type Fire safe according to ISO 10497
Stainless Steel / Iron Valve ISO 9001
CAST IRON GATE VALVE CLASS 125 NON-RISING STEM. (N.R.S.) STEM: SS410 (BRASS / SS304) MODEL: CI-12N (CI-12N/CI-2NS) CAST IRON GATE VALVE CLASS 125 OUTSIDE SCREW AND YOKE. STEM: SS410 (BRASS / SS304) MODEL:
6SC SERIES MODELS 910F, 910FLW, 920F IRON SWING CHECK VALVE INSTALLATION OPERATION MAINTENANCE GUIDE
6SC SERIES MODELS 910F, 910FLW, 920F IRON SWING CHECK VALVE INSTALLATION OPERATION MAINTENANCE GUIDE DOCUMENT NO.: ES-1495 REVISION LEVEL: A ISSUED BY: Bill Hooks DATE: 09/25/13 APPROVED BY: DATE: APOLLO
ALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN
BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric
SECTION GENERAL-DUTY VALVES FOR HVAC. A. Section includes valves for building services piping.
SECTION 23 05 23 GENERAL-DUTY VALVES FOR HVAC PART 1 - GENERAL 1.1 SUMMARY A. Section includes valves for building services piping. 1.2 REFERENCES A. AGA Z21.22 (American Gas Association) - Relief Valves
CONTENTS. Double Flow Measurement Device 1. Fixed Orifice Double Regulating Valve 3. Variable Orifice Double Regulating Valve 7
CONTENTS Double Flow Measurement Device 1 Fixed Orifice Double Regulating Valve 3 Variable Orifice Double Regulating Valve 7 Flow Measurement Graphs for Fixed Orifice Devices 9 for Variable Orifice Devices
ISO RESILIENT WEDGE GATE VALVE. Engineering Creative Solutions for Fluid Systems Since 1901
ISO RESILIENT WEDGE GATE VALVE Engineering Creative Solutions for Fluid Systems Since 1901 TABLE OF CONTENTS ISO RESILIENT WEDGE GATE VALVE Scope of Line...1 Features and Benefits...1 Suggested Specification...2
Industrial Bronze and Iron Price List
Industrial Bronze and Iron Price List TABLE OF CONTENTS IBI-1017 Effective: October 2, 2017 Revised: 12/07/2017 Suggested list prices are subject to change without notification. Visit our Website for the
SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
SUNY GENESEO 220523-1 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
PART 1 - GENERAL 1.1 DESCRIPTION OF WORK A. Provide labor, materials, equipment, and services necessary to install valves required to complete the work indicated on drawings. B. ASME Compliance: 1. ASME
Union County Vocational - Technical Schools Scotch Plains, New Jersey
SECTION 220523 - GENERAL-DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Brass ball valves. 2. Iron swing check valves. 3. Iron gate valves. 4. Iron globe valves. B.
Suggested Specifications
ISO 9001 Certified Suggested Specifications The Milliken criteria of quality, reliability, safety and value are embodied in the Millcentric Eccentric valve, setting higher standards for dependable performance
DIVISION 23 HEATING, VENTILATING, AND AIR CONDITIONING (HVAC) SECTION HVAC VALVES
DIVISION 23 HEATING, VENTILATING, AND AIR CONDITIONING (HVAC) SECTION 23 05 23 PART 1 GENERAL 1.01 DESCRIPTION A. Provide valves for the following systems: 1. Heating Hot Water 2. Chilled Water 3. Condenser
Materials : Carbon steel or stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 50 to 350 mm Between flanges GN 25-20 C + 210 C Max Pressure : 25 Bars Specifications : Double eccentric Wafer type Fire safe according to API 607 Iso
Brown University Revised August 3, 2012 Facilities Design & Construction Standards SECTION HVAC&R VALVES
SECTION 23 05 23 HVAC&R VALVES PART 1 - GENERAL 1.1 SUMMARY: A. Section includes valves for building services piping. 1.2 GENERAL VALVE APPLICATION REQUIREMENTS: A. Provide valve handle extensions that
SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
SECTION 22 05 23 PART 1 - GENERAL 1.1 SUMMARY A. Work Included: 1. Valves, General 2. Gate Valves 3. Balancing Valves 4. Ball Valves 5. Swing Check Valves 6. Backflow Prevention Assemblies 7. Pressure
MILLCENTRIC FULL/100% POR T ECCENTRIC PLUG VALVE
ISO 9001 CERTIFIED MILLCENTRIC FULL/100% POR T ECCENTRIC PLUG VALVE Suggested Specifications The Milliken criteria of quality, reliability, safety and value are embodied in the Millcentric Eccentric valve,
OPTIMAL VALVE SOLUTIONS FOR OIL AND GAS PLANTS
AVK FLOW CONTROL OPTIMAL VALVE SOLUTIONS FOR OIL AND GAS PLANTS InterApp World Valve Wouter Witzel TEC artec AVK 1 2 AVK FLOW CONTROL l OIL & GAS PLANTS CONTENT: AVK FLOW CONTROL 4-5 OFFSHORE PRODUCTION
Motorized Butterfly Valve
Motorized Butterfly Valve Actuated butterfly valves FEATURES PRODUCT DATA Wide size range (DN 50 DN500) for PN16 type For On-Off Control Manual override non-clutch design. Manual operation can be operated
V A L V E S. rice List of. Controlling fluids is our expertise TERMS & CONDITIONS : An ISO:9001 Co. PRICE LIST NO. : JMW / 3 0 W.E.
V A L V E S Controlling fluids is our expertise TERMS & CONDITIONS : This cancels our all previous issues. All prices are Ex. works, Jalandhar. Excise duty will be charged extra as applicable (presently
Cast Steel Valves. General Index. Figure Number Index JENKINS -1-
Cast Valves Cast Valves SINCE 1864 General Index General Data... 2 Materials... 2 Identification... 3 Gate Valve Features... 4, 5 Globe Valve Features... 9, 10 Swing Check Valve Features... 14, 15 Pressure/Temperature
Gate Valve (Model 1000)
Gate Valve (Model 1000) s: - 2 to 24 (50mm to 600mm) Rating: - Class 150 to Class 2500 Cast Steel Valves Flange End But-Weld End Information:- www.invacovalves.com sandesh@invacovalves.com invacovalves@gmail.com
DARTMOUTH COLLEGE DESIGN January 3, 2012 & CONSTRUCTION GUIDELINES
SECTION 15100 VALVES PART 1 DESIGN DIRECTIVE 1.1 SUMMARY A. This Section includes general duty valves common to most mechanical piping systems, special duty valves are specified in individual piping system
Type 431, 433. Balanced bellows design. Type Cap H2. 18 Adjusting screw with bushing. 19 Lock nut. 16 Upper spring plate. 12 Spindle.
Balanced bellows design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle 9 Bonnet 54 Spring 14 Split ring 17 Lower spring plate 55 Stud 56 Nut 8 Guide with bushing
WAFER STYLE KNIFE GATE VALVE
WAFER STYLE KNIFE GATE VALVE The EX(SER.10) model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging
Division 23 - HVAC Section Switzerland Beallsville K-12 GENERAL DUTY VALVES FOR HVAC PIPING
SECTION 23 05 23 GENERAL-DUTY VALVES FOR HVAC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and General Provisions of the Contract, including General and Supplementary Conditions and Division
ND = Double Door, SEAT NBR ES = Center Guided Silent Check / EPDM NS = Center Guided Silent Check / NBR. Butterfly Valves, Seat in body.
MAS-WDI-1118 MAS W-Series Water Works / Fire Protection Valves ORDERING CODES Series XX = Valve Type X = CWP XX = Design Type XX = End Connection W = AWWA/UL/FM, 10 = Gate Valve A = 300 CWP RS = Rising
Michigan State University Construction Standards. GENERAL-DUTY VALVES FOR PLUMBING PIPING Page
Page 220523-1 SECTION 220523 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
Trunnion Ball Valve Catalogue
Trunnion Ball Valve Catalogue Introduction "Fusion" is the registered trademark of Archmetal Industries, a member of the Fortune Group. * The Fortune Group is a world class producer of a full range of
STANDARDS and SPECIFICATIONS
ANSI (American National Standards Institute) ANSI B31.4 - Liquid petroleum transportation piping system. ANSI B31.4 - Gas transmission and distribution piping system. API (American Petroleum Institute)
BUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
WAFER STYLE KNIFE GATE VALVE
11 WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off
516509_tabs 11/16/10 4:55 AM Page 1 FIRE HYDRANTS
Date Printed: November 2010 FIRE HYDRANTS or Tyton (6"),6, or 8" A EDDY FIRE HYDRANTS PARTS LIST WORKING PRESSURE: 150 PSI Note: Discontinued For Reference Only 350 PSI Working Pressure
KENNEDY VALVE KS-RW RESILIENT WEDGE VALVES
KENNEDY VALVE KS-RW RESILIENT WEDGE VALVES KENNEDY VALVE AWWA C515 Resilient Wedge Gate Valves Meet or Exceed the Requirements of AWWA Standard C515 UL-262/FM-1120/1130 ULC-Underwriters of Canada 2 1/2
Size: 1/4 to 3. Material: 316 Stainless Steel, Carbon Steel,
Size: 1/4 to 4 Material: 316 Stainless Steel, Carbon Steel, Alloy 20, Hastelloy C, Monel, Brass, SW, BW, BSPT, 150#, 300#, 600#, Flanged Pressure: Vacuum to 3000 PSI* -50 to 600 F* ASME B16.34 Design Bottom
DeZURIK BOS-US 2-20" (50-500mm) UNINTERRUPTED SEAT RESILIENT SEATED BUTTERFLY VALVES TECHNICAL SPECIFICATIONS
BULLETIN 46.00-2B OCTOBER 2015 DeZURIK BOS-US 2-20" (50-500mm) UNINTERRUPTED SEAT RESILIENT SEATED BUTTERFLY VALVES TECHNICAL SPECIFICATIONS - Materials of Construction - Specifications - Ordering - Dimensions
Size : Ends : Min Temperature : Max Temperature : MADE OF STAINLESS... MADE OF STAINLESS...
MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 mm Between flanges PN10/16 and Class 150 (PN20) - 10 C + 110 C Max Pressure : 16 Bars up to DN300 Specifications : Long
PDC Elastomer Lined Series 27 Butterfly Valve 2" thru 36" for 125/150 lb. Flanging
PDC Elastomer Lined Series 27 Butterfly Valve 2" thru 36" for 125/150 lb. Flanging General Description: The PDC "Elastomer Lined" series butterfly valves are available in both full lug and wafer styles.
WAFER STYLE KNIFE GATE VALVE
WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on
Valves Range RVRX - Resilient Seated Gate Valve PN16 Flange
Valves Range RVRX - Resilient Seated Gate Valve PN16 Flange No Component Material 1 Body Ductile iron GGG40 2 Wedge DI Fully Vulcanised EPDM 3 Wedge Nut Brass 4 Stem SS420 5 Bolt Q235+Zinc 6 Gasket EPDM
UNIVERSITY SERVICES ANNEX James Madison University Harrisonburg, Virginia State Project Code: Architect s Project Number:
SECTION 230523 GENERAL DUTY VALVES FOR HVAC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Provisions of the Contract and of the Contract Documents apply to this Section. 1.2 DEFINITIONS A. The following
15100 VALVES. E. Section Building Automation and Control System Guidelines
15100 VALVES PART 1: GENERAL 1.01 RELATED SECTIONS A. Section 15050 Basic Material and Methods B. Section 15545 Chilled Water System C. Section 15550 Heat Generation D. Section 15790 Coils E. Section 15955
Tianjin Galaxy Valve Co., Ltd
Tianjin Galaxy Valve Co., Ltd CONTENTS Butterfly Valves Wafer Butterfly Valves Lug Butterfly Valves U-Type Butterfly Valves AWWA C504Double Flanged Butterfly Valves ISO Double Flanged Butterfly Valves
Valves. BS Standard JINAN MEIDE CASTING CO., LTD.
Valves BS Standard JINAN MEIDE CASTING CO., LTD. Resilient Wedge Gate Valve XZ81X Grooved Resilient OS&Y Gate Valve Page 11 XZ51X Flanged x Grooved Resilient OS&Y Gate Valve Page 12 Z85X Grooved Resilient
Milliken Valve offers the following for your water and wastewater needs:
Milliken Valve offers the following for your water and wastewater needs: s Series 601/600 Flanged & MJ Series 601S Stainless Steel Series 601RL Rubber Lined Series 602 High Pressure Series 613A Threaded
Size : Ends : Min Temperature : Max Temperature : Materials : ASTM A351 CF8M body
Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 mm Between flanges PN10/16 and Class 150 (PN20) - 10 C + 110 C Max Pressure : 16 Bars up to DN300 Specifications : Long neck for isolation
FKB INDÚSTRIA DE EQUIPAMENTOS LTDA. KNIFE GATE VALVE VGU-01 (Rev. 02/2016)
General Description The model FKB VGU-01 is developed in accordance with MSS-SP 81 Standard and its function is blocking the fluid sewage. They are light equipments for semi-lug body and flange installation,
catalog C-NPS-1014 NIBCO Press System
catalog C-NPS-1014 ahead of the flow NIBCO Press System Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products and
CATALOG C-NPS-0812 AHEAD OF THE FLOW. NIBCO Press System
CATALOG C-NPS-0812 AHEAD OF THE FLOW NIBCO Press System Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products and
A. American National Standards Institute: 1. ANSI Z Relief Valves for Hot Water Supply Systems.
SECTION 220523 - PLUMBING VALVES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Ball valves. 2. Butterfly valves. 3. Swing check valves. 4. Spring loaded check valves. 5. Water pressure reducing
Titan Check Valves. Call. Fax. . Visit. Titan Flow Control. Your Pipeline to the Future
Your Pipeline to the Future TITAN 290 Corporate Drive Lumberton, NC 28358 Titan Check Valves, Inc. is a high quality manufacturer of check valves. With a dedication to great customer service, cutting edge
See our expanding selection of products on Product Portfolio
See our expanding selection of products on www.fnw.com Product Portfolio Table of Contents Low Lead Products- Page 3 Ball Valves, Check Valves, Strainers, Water Hammer Arrestors Ball Valves, Brass - Page
KEYSTONE. The HiLok high performance butterfly valves offer efficient, bidirectional sealing across a wide spectrum of service conditions.
KEYSTONE The HiLok high performance butterfly valves offer efficient, bidirectional sealing across a wide spectrum of service conditions. Features Cast on ISO top plate. Long neck for insulation service.
Cast Steel Valves. Contents Contents. Figure Number Index. Figure Number Cross Reference. Valve Type Class Stockham Jenkins
Stockham Cast Valves Cast Valves Contents Contents Performance in Any Application...4 How to Specify and Order Valves...4 Installation, Marking and Identification...5 Gate Valves...6 Globe Valves...11
CAST IRON VALVES CATALOG
CAST IRON VALVES CATALOG www.walworthvalves.com INDEX INTRODUCTION WALWORTH ENGINEERING CONTROL... 5 WALWORTH QUALITY SYSTEM... 5 QUALITY CONTROL EQUIPMENT... 9 CAST IRON GATE, GLOBE & SWING CHECK VALVES
Wafer, Semi Lug, Lug and Flanged Type
Year : Wafer, Semi Lug, Lug and Flanged Type Page 1 Year : Specification Description : GVC concentric rubber lined butterfly valves suitable for bi-directional flow and bubble tight shut-off at full rated
Concentric butterfly valves
Lug Between flanges PN10/16 1135 Lever Disc GGG40 nickel plated / Seat EPDM.../10: flanges PN10.../16: flanges PN16 DN 40 50 65 80 100 125 150 200/10 200/16 250/10 250/16 300/10 300/16 16 16 16 16 16 16
Michigan State University Construction Standards. GENERAL-DUTY VALVES FOR HVAC PIPING Page
Page 230523-1 Copyright 2005 by The American Institute of Architects (AIA) Exclusively published and distributed by Architectural Computer Services, Inc. (ARCOM) for the AIA Modified by MSU Physical Plant
TOTAL PRODUCT O U R G E N I U S I S V A L V E S & P I P E F I T T I N G S W A T E R H E A T I N G V E N T I L A T I O N A I R C O N G A S
TOTAL PRODUCT C A T A L O G U E W A T E R H E A T I N G V E N T I L A T I O N A I R C O N G A S BALANCING VALVES BALL VALVES BUTTERFLY VALVES CHECK VALVES DRAIN COCKS GATE VALVES GLOBE VALVES PIPE FITTINGS
BUTTERFLY VALVES HIGH PERFORMANCE
VALVE MANUFACTURER FOR INDUSTRIAL AND WATER APPLICATIONS BUTTERFLY VALVES HIGH PERFORMANCE Pressure : PN10 ~ PN40 / Class 150 ~ 300 Size : Basic Type : 2" ~ 48" (50mm ~ 1200mm) Fire Safety Type : 2" ~
BUTTERFLY VALVE VF-7 Series
BUTTERFLY VALVE VF-7 Series CENTRIC, RUBBER SEATED LEVER GEAR PNEUMATIC - ELECTRIC OPERATED ALLOWABLE PRESSURE DN 40 300mm : 16 bar DN 350 1200mm : 10 bar INVESTMENT CASTING STAINLESS STEEL BODY 2 12 (50mm
CAST STEEL GATE VALVE
CAST STEEL GATE VALVE DESIGN CHARACTERISTICS OF API00 CAST STEEL GATE VALVE The design of thrust bearing makes valve opened easily and flexibly. Handwheel Nut Handwheel Stem Nut Retainer Stem Nut Lubricating
Materials : Ductile iron body EN GJS
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 40 to 600 mm Between flanges PN10/16-10 C + 130 C Max Pressure : 16 Bars up to DN300, 10 bars over Specifications : Long neck for isolation
WAFER BUTTERFLY VALVES
WAFER BUTTERFLY VALVES Actuator flange accomodate all type of operators; handle, gear, electric and pneumatic actuator Strong precision key gives positive attachment for manual lever or actuator. Shaft
See our expanding selection of products on Product Portfolio
See our expanding selection of products on www.fnw.com Product Portfolio Table of Contents Low Lead Products- Page 3 Ball Valves, Check Valves, Strainers, Water Hammer Arrestors Ball Valves, Brass - Page
Fabri-Valve. CF33/CF133 Ported Slide Gate Valve
Fabri-Valve CF33/CF133 Ported Slide Gate Valve CF33/CF133 Ported Slide Gate Valve Fabri-Valve Figures C33 / C133 / F33 / F133 are bi-directional soft seated, slide gate valves designed for on/off service
GENERAL CATALOGUE Catalogue 2013
GENERAL CATALOGUE Catalogue 2013 Company Profile GALA - Extends Business on a Global Perspective. GALA company offers a wide range of products and systems in the field of valves, piping, and seismic isolation
A. This Section includes general duty valves common to several HVAC piping systems.
SECTION 23 05 23 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
Aloyco. Corrosion Resistant Valves. The First Name In Corrosion Resistant Valves
loyco Corrosion Resistant s The First Name In Corrosion Resistant s Stainless Steel s General Index Figure No. Type Pressure Class End Connection Material vailable Size Range Catalog Page 0 Gate, RS 00
Materials : ASTM A351 CF8M body
Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 mm Between flanges PN10/16 and Class 150 (PN20) - 10 C + 110 C Max Pressure : 16 Bars up to DN300 Specifications : Long neck for isolation
RESILIENT SEATED BUTTERFLY VALVES. Howell Valve & Automation. Toll Free: Howellvalve.com
RESILIENT SEATED BUTTERFLY VALVES Howell Valve & Automation Toll Free: 1-888-469-3557 Howellvalve.com TABLE OF CONTENTS Description Page Index 2 Resilient Standard Features 3 ST Boot Series with BUNA-N
A Long Experience in Energy Equipment and one Goal: The Customer s satisfaction. GLOBE VALVES. Pressure Seal - Bolted Bonnet Cryogenic.
A Long Experience in Energy Equipment and one Goal: The Customer s satisfaction. GLOBE VALVES Pressure Seal - Bolted Bonnet Cryogenic. 1 Design 2 Outside 3 Face 4 Non 5 Suggested 6 Dimension 7 Special
O IL & G AS INDUSTRIAL VALVES, ACTUATORS & ACCESORIES
O IL & G AS O IL & G AS License Number 6D-1724 FORGED STEEL Size Range Ball Valves API 6D / BS EN ISO 17292 Gate Valves Globe Valves API 602 / BS EN ISO 15761 Class 150-2500 / Class 800 ½ - 2 Check Valves
R o L. BUTTERFLY VALVE of carbon steel with flanges series BLUE LINE. Operation. Edition
of carbon steel 31500 series C ont R o L Operation Edition 03-0-009 The welded butterfly valve 31500 is used for example in district heating, district cooling and industry. It can be used as an on-off
SECTION VALVES
PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions Specification Sections, apply to this Section. B. Related Sections: