IMPACT IMPEX PTFE, PFA, PVDF, PP LINED PIPE & FITTINGS. ANSI # 150.

Size: px
Start display at page:

Download "IMPACT IMPEX PTFE, PFA, PVDF, PP LINED PIPE & FITTINGS. ANSI # 150."

Transcription

1 IMPACT IMPEX PTFE, PFA, PVDF, PP LINED PIPE & FITTINGS.. The information contained in this publication is intended as a guide to customers, and is freely given in good faith. Whilst every care has been taken in its preparation, the company does not accept responsibility for inaccuracies. Development is continuous. Drawings and specifications may be modified from time to time without notice.

2 PIPE: NPS PTFE: ASTM D 4894 Type IV & D 4895 Type III A mm C mm C mm T mm 1m + 1m max. min. STD HD ~kg ~kg 15 3, , , , , , , , , N.A , N.A , , , , , , , , ,

3 90 Elbow ANSI #150 S.G. Iron - EN-GJS LT Cast Steel - ASTM A 216 WCB (PTFE Lined*) PTFE: ASTM D 4895 Type III Polypropylene - ASTM D 4101 A mm C mm T mm ~kg

4 90 Elbow Two Piece, Long Radius PTFE: ASTM D 4894 Type IV & D 4895 Type III Steel - ASTM A 234 gr. WPB, ASTM A 105. A mm C mm T mm ~ kg

5 45 Elbow S.G. Iron to EN-GJS LT Cast Steel to ASTM A 216 WCB (PTFE Lined) ASTM A 234 gr. WPB, ASTM A 105 PTFE: ASTM D 4895 Type III Polypropylene - ASTM D 4101 A mm C mm T mm ~kg

6 Equal Tee S.G. Iron - EN-GJS LT Cast Steel - ASTM A 216 WCB Polypropylene - ASTM D 4101 A mm C mm T mm ~kg

7 Equal Tee Body Plate: BS A Tube: API 5L gr. B Flange: ASTM A 105 PTFE: ASTM D 4894 Type IV A mm C mm T mm ~kg

8 Reducing Tee S.G. Iron - EN-GJS LT Cast Steel - ASTM A 216 WCB Body Plate: BS A Tube: API 5L gr. B Flange: ASTM A 105 Polypropylene -to ASTM D 4101 A mm B mm C mm T mm ~kg

9 Reducing Tee S.G. Iron - EN-GJS LT Cast Steel - ASTM A 216 WCB Body Plate: BS A Tube: API 5L gr. B Flange: ASTM A 105 Polypropylene -to ASTM D 4101 A mm B mm C mm T mm ~kg

10 Reducing Tee Body Plate: BS A Tube: API 5L gr. B Flange: ASTM A 105 PTFE: ASTM D 4894 Type IV A mm B mm C mm T mm ~kg

11 Concentric Reducer S.G. Iron - EN-GJS LT Cast Steel - ASTM A 216 WCB PTFE: ASTM D 4895 Type III Polypropylene - ASTM D 4101 Tapped holes on cast steel WCB items on flange B only A mm B mm C mm T mm ~kg

12 Concentric Reducer ASTM A 234 ASTM A 105 PTFE: ASTM D 4894 Type IV A mm B mm C mm T mm ~kg Reductions may be achieved by the use of combined reducers and reducing flanges. The overall length would be that of the reducer plus the reducing flange thickness.

13 Eccentric Reducer S.G. Iron - EN-GJS LT Cast Steel - ASTM A 216 WCB - ASTM A 234, ASTM A 105 PTFE: ASTM D 4895 Type III Polypropylene - ASTM D 4101 Tapped holes on cast steel WCB items on flange B only A mm B mm C mm T mm ~kg

14 Eccentric Reducer ASTM A 234, ASTM A 105 PTFE: ASTM D 4894 Type A mm B mm C mm T mm ~kg Reductions may be achieved by the use of combined reducers and reducing flanges. The overall length would be that of the reducer plus the reducing flange thickness.

15 Instrument Tee S.G. Iron to EN-GJS LT Body plate: BS A Tube: API 5L Gr. B Flange: ASTM A 105N Polypropylene - ASTM D 4101 A C T E ~kg E ~kg E ~kg E ~kg E ~kg E ~kg mm mm mm mm mm mm mm mm x 15 x 15 x 20 x 20 x 25 x 25 x 32 x 32 x 40 x 40 x 50 x Hole patterns require threaded bolt holes on 50 nb branch items.

16 Instrument Tee Body plate: BS A Tube: API 5L Gr. B Flange: ASTM A 105N A C T E(25) ~kg E(40) ~kg E(50) ~kg

17 Multibranch Connector Full-Face A C T E ~kg E ~kg E ~kg E ~kg E ~kg E ~kg mm mm mm mm mm mm mm mm x 15 x 15 x 20 x 20 x 25 x 25 x 32 x 32 x 40 x 40 x 50 x *

18 Equal Cross ANSI #150 S.G. Iron - EN-GJS LT Cast Steel - ASTM A 216 WCB Polypropylene - ASTM D 4101 A mm C mm T mm ~kg

19 Equal Cross Body plate: BS A Tube: API 5L Gr. B Flange: ASTM A 105N PTFE: ASTM D 4894 Type A mm C mm T mm ~kg T.B.A T.B.A T.B.A T.B.A T.B.A T.B.A.

20 Lateral Tee T Cast Steel - ASTM A 216 WCB Polypropylene - ASTM D 4101 A limited range of reducing laterals is also available A mm C mm D mm T mm ~kg

21 Blind Flange : ASTM A 105N PTFE: ASTM D 4894 Type Polypropylene - ASTM D 4101 T - bonded linings. K & P - full face, non-bonded linings. A mm F mm

LATEST ARRIVALS CATALOGUE STOCK

LATEST ARRIVALS CATALOGUE STOCK LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL

More information

INTERVALVE (ENGINEERING DATA SHEET)

INTERVALVE (ENGINEERING DATA SHEET) GENERAL FEATURES PRODUCT SPECIFICATION MATL. OF CONSTRUCTION OPERATION Title VALVE TYPE VALVE MODEL DESCRIPTION DESIGN, MFG. STD. INTERVALVE (ENGINEERING DATA SHEET) Product Specification for IVEX - F

More information

BFV : 14 : 10 : 12 BUTTERFLY VALVE

BFV : 14 : 10 : 12 BUTTERFLY VALVE BFV : 14 : 10 : 12 BUTTERFLY VALVE Looks Like Conventional Butterfly Valve... 2 FEATURES HIGHER Cv Larger disc for larger flow Improved profile of disc provides minimum Resistance to flow BOTTOM STEM Stem

More information

PTFE Lined Pipe and Fittings

PTFE Lined Pipe and Fittings Allied Supreme Corp. - 1 - PTFE Lined Pipe and Fittings Allied Supreme Corp. - 2 - Index Specification For PTFE Lined Pipe and Fittings..3 PTFE Lined Pipe 7 PTFE Lined 90 Elbow. 8 PTFE Lined 45 Elbow.9

More information

Section 2. Shurjoint Grooved Fittings Flow Data / Friction Resistance Ductile Iron Grooved Fittings. Wrought Grooved Fittings

Section 2. Shurjoint Grooved Fittings Flow Data / Friction Resistance Ductile Iron Grooved Fittings. Wrought Grooved Fittings Section 2 Cast & Wrought Grooved Fittings Shurjoint Grooved Fittings... 56 Flow Data / Friction Resistance... 56 Ductile Iron Grooved Fittings 7110 / 7111 / 7112 / 7113 Elbows... 57 7120 / 7135 / 7130

More information

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 48 /1200 in a variety of straight and reducing styles. Most standard fittings are cast of durable

More information

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable

More information

UNITED BRAND FITTINGS

UNITED BRAND FITTINGS NFF0711 UNITED DUCTILE IRON CLASS 0 FLANGED FITTINGS UNITED BRAND FITTINGS AWWA C1, ANSI A21. Our dedication to the mechanical piping industry has given us the opportunity to provide you with a quality

More information

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable

More information

AVK (WWE) BUTTERFLY VALVE DN 50 to DN (EVTLS)

AVK (WWE) BUTTERFLY VALVE DN 50 to DN (EVTLS) Flangeless tapped lug Wafer Type Design code EN593 Flange connection to EN 1092 PN 6, 10, 16, 25 DESIGN Body Flangeless tapped lug wafer type End Connection EN 1092 PN 6, 10 and 16 ASME B16.5 cl. 150 /

More information

MADE OF STAINLESS...

MADE OF STAINLESS... MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 50 to 600 mm ( NPS 2" to 24" ) Between Class 150 (PN20) flanges 29 C + 210 C Max Pressure : 20 Bars Specifications : Double eccentric

More information

GRUVLOK FITTINGS FOR GROOVED-END PIPE

GRUVLOK FITTINGS FOR GROOVED-END PIPE GRUVLOK FITTINGS FOR GROOVED-END PIPE Gruvlok fittings are available through 24" nominal pipe size in a variety of styles. Use the Fitting Table to convert nominal pipe size to corresponding pipe These

More information

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable

More information

Dual Chamber Orifice Fitting

Dual Chamber Orifice Fitting Dual Chamber Orifice Fitting Sure Shot Dual Chamber Orifice Fitting 1 11 2 3 10 4 9 8 5 7 6 1. Top Clamping Bar Gasket: Seals easily by tightening square head clamping bar screws. Non- Asbestos flat gasket

More information

FLANGES & GASKETS. ITEM No. QTY. DESCRIPTION SIZE MATERIAL MASS (kg) 1 1 FLANGE RFWN - DN # Sch 80 DN100mm 300# Sch 80 A

FLANGES & GASKETS. ITEM No. QTY. DESCRIPTION SIZE MATERIAL MASS (kg) 1 1 FLANGE RFWN - DN # Sch 80 DN100mm 300# Sch 80 A FLANGES & GASKETS Most of the flanges have intelligent custom properties built into their design tables (making extensive use of the concatenate function) to populate your Bills of Materials (example below).

More information

BALL VALVE DATA SHEET NO. 01 (150#)

BALL VALVE DATA SHEET NO. 01 (150#) BALL VALVE DATA SHEET NO. 01 (150#) VALVE CODE BF101 VALVE TYPE Double Flanged Full Port BODY MATERIAL CARBON STEEL TO ASTM A 216 Gr. WCB CLASS 150# DESIGN STANDARD ISO 17292 SIZE 1/2" TO 1 1/2" 2" TO

More information

SECTION 1 Grooved Fittings

SECTION 1 Grooved Fittings Anvil offers two different sets of stainless steel fittings. The Gruvlok Series Fittings have full flow designs formed from type 304SS pipe. The Schedule 10 fittings are fabricated from segmentally welded

More information

Hole-cutting. cutting a hole. After the hole has been cut all rough edges must be removed and the area within 5/8 (16mm) of the hole

Hole-cutting. cutting a hole. After the hole has been cut all rough edges must be removed and the area within 5/8 (16mm) of the hole Mechanical Tees Hole-cutting Shurjoint mechanical tees provide a fast and easy mid-point branch outlet, eliminating the need for welding or the use of multiple fittings. The Model M21 features a female

More information

flowconme Types of Fittings Available Wall Thickness Sch 5 - Sch 160 (Sch 5s - Sch 160s) Others available upon special request

flowconme Types of Fittings Available Wall Thickness Sch 5 - Sch 160 (Sch 5s - Sch 160s) Others available upon special request FITTINGS Overview Types of Fittings Available 45, 9 Elbows, 18 Returns (Short & Long Radius) Tees & Crosses (equal & reducing), Reducers (concentric & eccentric), Caps, Stud Ends, Weldolets, Outlets, Laterals

More information

Product data sheet Wouter Witzel - EVFSGD Valves Rubber Lined - Centric EVFS PDS H

Product data sheet Wouter Witzel - EVFSGD Valves Rubber Lined - Centric EVFS PDS H DESIGN Body Double Flanged type End Connection EN 1092 PN 6, 10 and 16 ASME B16.5 cl. 150 / B16.47 cl. 150 MSS SP 44 cl. 150 AWWA C207 cl. B, D and E BS 10 table D and E Face to Face EN558-1/2 Series 13

More information

611, 671. Diaphragm Valve, Metal

611, 671. Diaphragm Valve, Metal Diaphragm Valve, Metal Construction The 611 and 671 manually operated 2/2-way metal diaphragm valves have a low maintenance plastic bonnet and an integral optical position indicator as standard. Features

More information

Direct Mount Packages

Direct Mount Packages 800.783.7836 Direct Mount Packages BEV9 Actuated package Size range: 1/ - Pressure rated for 1000 WOG 316 Stainless steel construction Live loaded stem seal design Full Port Threaded Ends (F) EZ99 Actuated

More information

HIGH PERFORMANCE BUTTERFLY VALVE

HIGH PERFORMANCE BUTTERFLY VALVE Revised 11/17/2017 HIGH PERFORMANCE BUTTERFLY VALVE LCS-6822 (Class 150) LCS-7822 (Class 300) APPLICATIONS Ideally suited for commercial, industrial, and mechanical HVAC services. Use in other applications

More information

611, 671. Diaphragm Valve, Metal

611, 671. Diaphragm Valve, Metal Distributed by: Tel: 905.677.9000 Toll Free: 1.0.486.7863 www.tricanada.com Diaphragm Valve, Metal Construction The 611 and 671 manually operated 2/2-way metal diaphragm valves have a low maintenance plastic

More information

UNITED BRAND FITTINGS

UNITED BRAND FITTINGS FLANGE DETAILS Class 5 S ize O.D. B.C. T Bolt Hole Bolt Dia. & of Dia. Length Bolts 4.75 5/ 8 4 x 4 50 4 x 4 3 4 4 x 4 4 00 5/ 4 x 3 8 5.00 50 5/ 7/ 8 4 x 3 8 6.00 50 7/ 8 4 x 3 8 8 3.50.75 8 7/ 8 4 x

More information

TYPE ET14 TEMPERATURE REGULATOR CAST IRON, BRONZE or STEEL CONTROLS 20 to 500 F

TYPE ET14 TEMPERATURE REGULATOR CAST IRON, BRONZE or STEEL CONTROLS 20 to 500 F TYPE ET14 TEMPERATURE REGULATOR CAST IRON, BRONZE or STEEL CONTROLS 20 to 500 F Temperature Regulation for Batch Process Storage Heaters (Water, Fuel Oil or Chemical) Air Heating TYPE ET14 TEMPERATURE

More information

USING EXABOND TECHNOLOGY LINER PIPE

USING EXABOND TECHNOLOGY LINER PIPE LINER PIPE Inside Diameter Liner Thickness DN - Nominal diameter S 1 - Liner wall thickness d 2 - Outside diameter of liner Liner material density for PVC: 1.38g/cm 3 Liner material density for PVC-C:

More information

LINED PIPES & FITTINGS

LINED PIPES & FITTINGS LINED PIPES & FITTINGS DIN Standard LINED PIPES & FITTINGS The product The name of the product. Page No. PTFE Lined pipes 16 RL Lined pipes 17 SL Lined pipes 18 Jacketd lined pipes 19 Solid and Lined Spacers

More information

E STORE PRICELIST E Store Pricelist Page No 1

E STORE PRICELIST E Store Pricelist Page No 1 E STORE PRICELIST 10-01-18 Page No 1 Index Page No Description Make Size range 4 Pricelist of M.S & G.I Pipes as per IS -1239 part I / IS 3589 JINDAL/TATA ½ to 6 Pricelist of C.S seamless Non IBR & IBR

More information

Section 25 Project Surplus Packages - Sales Item

Section 25 Project Surplus Packages - Sales Item Section 25 Project Surplus Packages - Sales Item 25010112 Project Unused Surplus Package. Valves, Pipe and Various Pipe Fittings in Carbon and Stainless Steel. All Certification available. Stored in Bulgaria

More information

Plastic-Lined Piping Systems

Plastic-Lined Piping Systems Plastic-Lined Piping Systems The Next Generation of Safety, Quality and Innovation BAUM America Corp 46 Mesa Dr. St. Albans, WV 25177 Phone: Fax: (304) 755-2573 E-Mail: info@baumamericacorp.com www.baumamericacorp.com

More information

AVK (WWE) BUTTERFLY VALVE DN (3" to 32") 75 (EVML)

AVK (WWE) BUTTERFLY VALVE DN (3 to 32) 75 (EVML) AVK (WWE) BUTTERFLY VALVE DN 80 800 (3" to 32") 75 (EVML) Mono flanged type Overall length DN 80300 to ISO 5752 long, basic series 16 (BS 5155 wafer long, DIN 3202K3), Overall length DN 3501000 to ISO

More information

Visual Level Indicators (VLI) Plastic & Top of Tank Series Series Type Material Pipe Operating Operating Page

Visual Level Indicators (VLI) Plastic & Top of Tank Series Series Type Material Pipe Operating Operating Page Visual Level Indicators (VLI) Plastic & Top of Tank Series Series Type Pipe Operating Operating Page O.D. x s Pressure Temperature Plastic thread 10 25670 PVDF 63.0 x 3.6 2.5-10 thread max. 140 C 61 Plastic

More information

Materials : Carbon steel or stainless steel

Materials : Carbon steel or stainless steel Size : Ends : Min Temperature : Max Temperature : DN 50 to 600 mm Between PN25 or PN16 flanges 29 C + 210 C Max Pressure : 25 Bars Specifications : Double eccentric Wafer type Fire safe according to ISO

More information

Product Range. Products for all industrial applications

Product Range. Products for all industrial applications Product Range Products for all industrial applications CONTROL VALVES BUTTERFLY VALVES Series Description Symbol Version Page Series Description Symbol Version Page 1a Globe Valve PTFE 4 10a Double Eccentric

More information

HD series. HD Series 1 technical data 1 components DN RTFE seat 2 Inconel seat 3 "FIRE SAFE" seat 4

HD series. HD Series 1 technical data 1 components DN RTFE seat 2 Inconel seat 3 FIRE SAFE seat 4 HD series double eccentric HD Series 1 technical data 1 components DN 50-300 2 RTFE seat 2 Inconel seat 3 "FIRE SAFE" seat 4 tables dimensions 5 torque values 6 pressure / temperature 6 tests 6 Gearboxes

More information

Verderflex Dura 10 Technical Data Sheet

Verderflex Dura 10 Technical Data Sheet 11 Gateway Drive Macon, Georgia 3121 Verderflex Dura 1.6 Gal/rev.5 Pumphead Absorbed Power (HP).4.3.2.1 175 psi 72.5 psi psi CSM EPDM 1/14 12/16 14/175 16/195 18/215 Product temperature limitations ( F)

More information

Model C10 / C11 / C20 / C60 Grooved Fitting For Copper Tubing Nominal Pipe Pipe C10 90 o Elbow C11 45 o Elbow C20 Tee C60 Cap

Model C10 / C11 / C20 / C60 Grooved Fitting For Copper Tubing Nominal Pipe Pipe C10 90 o Elbow C11 45 o Elbow C20 Tee C60 Cap GROOVED FITTINGS FOR COPPER TUBING Shurjoint Grooved-end fittings are produced from bronze castings. Bronze castings are produced from lead-free alloy C89836* Bismuth copper alloy per ASTM B584. Materials

More information

Model-1 Natural Gas Valves

Model-1 Natural Gas Valves Flanged End 285 Screwed Weld End Locking Devices KEROTEST Model-1 s Short Weld End Long Weld End Weld x Flange 500 / 740 Flanged End 500 / 740 Weld x Flange 285 Model-1 Short Weld End Standard Welding

More information

Diaphragm Valve, Metal

Diaphragm Valve, Metal Diaphragm Valve, Metal Construction The 601, and manually operated diaphragm valves have a temperature resistant plastic handwheel, 602 has a stainless steel handwheel. Bonnet and internals are made all

More information

GROOVED FITTINGS FOR COPPER TUBING

GROOVED FITTINGS FOR COPPER TUBING GROOVED FITTINGS FOR COPPER TUBING Shurjoint Grooved-end fittings are produced from bronze castings. Bronze castings are produced from lead-free alloys C90500 and or C89836* Bismuth copper alloy per ASTM

More information

PRZEPUSTNICE. B-599 Centric butterfly valve PN16 from -10ºC to +130ºС DN32 DN200 PN-EN 2-3

PRZEPUSTNICE. B-599 Centric butterfly valve PN16 from -10ºC to +130ºС DN32 DN200 PN-EN 2-3 BUTTERFLY VALVES PRZEPUSTNICE TYPE DESCRIPTION NOMINAL PRESSURE TEMPERATURE DIAMETER STANDARD PAGE B-599 Centric butterfly valve PN16 from -10ºC to +130ºС DN32 DN200 PN-EN 2-3 B-099 Centric butterfly valve

More information

Hinge Pin. 7 Bearing. Spring Plate. Spring. Disc. Body. Gasket. Stop PIn

Hinge Pin. 7 Bearing. Spring Plate. Spring. Disc. Body. Gasket. Stop PIn Hinge Pin Bearing Spring Plate Spring Disc Body Gasket Stop PIn TYPICAL MATERIAL OF MAIN PARTS No. Part Name Carbon Steel Stainless Steel Alloy Steel 1 Stop Pin 2 Gasket 3 Body 4 Disc 5 Spring 6 Spring

More information

Diaphragm Valve, Metal

Diaphragm Valve, Metal Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance actuator. Normally Closed, Normally Open and Double Acting control functions are available.

More information

BS up.v.c PRESSURE PIPE FITTINGS

BS up.v.c PRESSURE PIPE FITTINGS BS Equal Elbow 90 Faucet Elbow 90 Equal Tee Reducing Tee To solvent weld to pipes at both end. L A B Dia. d (Gram) ½ 1 5mm 16.5 17.4 16.5 21.50mm 20 ¾ 2 0mm 19.5 19.6 18.8 26.90mm 45 1 25m m 25.5 21.9

More information

Buttweld. Pipe Fittings NOTE: ANSI B16.9, MSS-SP-43

Buttweld. Pipe Fittings NOTE: ANSI B16.9, MSS-SP-43 Buttweld Pipe Fittings NOTE: ANSI B16.9, MSS-SP-43 Buttweld fittings in duplex and other special alloys are available from stock and throughout our worldwide network of suppliers. and eccentric reducers,

More information

These PFA and PTFE lined products offer a reliable solution in hazardous applications

These PFA and PTFE lined products offer a reliable solution in hazardous applications These PFA and PTFE lined products offer a reliable solution in hazardous applications Features Check valves Heavy duty body in ductile iron GGG4.3 (ASTM A-395). Heavy duty PFA or PTFE lining. Borosilicate

More information

Technische Dokumentation Technical Documentation

Technische Dokumentation Technical Documentation Technische Dokumentation Technical Documentation XOMOX Fully Lined Check Valves Dok. Nr.: tdb_check_gb XOMOX International GmbH & Co. Von-Behring-Straße 15 D-88131 Lindau / Deutschland Januar 2008 Table

More information

AVK (WWE) BUTTERFLY VALVE DN (2" to 56") 75 (EVS)

AVK (WWE) BUTTERFLY VALVE DN (2 to 56) 75 (EVS) AVK (WWE) BUTTERFLY VALVE DN 50 1400 (2" to 56") 75 (EVS) Wafer type Face to face dimension to ISO 5752 short, basic series 20 (BS 5155 wafer short, DIN 3202K1) Flange connection to ISO 70052 (BS EN 10922,

More information

Features. Dimensions - Materials - & Parts & Parts List List

Features. Dimensions - Materials - & Parts & Parts List List MOYGRO check valve Features Compact Design - Short face-to-face length enabling installation in restricted spaces not possible with conventional check valves. Spring Assisted Closure - Providing faster

More information

Series 2003 / Three-way control valve. Features. Wörth am Main

Series 2003 / Three-way control valve. Features. Wörth am Main Series 2003 / 2013 Three-way control valve SPECIFICATION The Series 2003 / 2013 comprises a range of skirt guided Three-way mixing (2003) and diverting valves (2013). Available in a variety of sizes, they

More information

HIGH PERFORMANCE BUTTERFLY VALVE MODEL HP300 SERIES

HIGH PERFORMANCE BUTTERFLY VALVE MODEL HP300 SERIES FEATURES AND BENEFITS Wafer & Lugged bodied butterfly valves for bi-directional use Dead end service are offered as standard in full ANSI Class and ratings (for lugged design only) The design of double

More information

UNITED BRAND FITTINGS

UNITED BRAND FITTINGS UNITED BRAND FITTINGS ANSI B. Class 5 ( ~ ) AWWA C Class 0 (3 ~ ) Our dedication to the mechanical piping industry has given us the opportunity to provide you with a quality comprehensive line of flanged

More information

Champion Valves, Inc. DUAL DISC SPRING LOADED WAFER CHECK VALVES

Champion Valves, Inc. DUAL DISC SPRING LOADED WAFER CHECK VALVES Champion Valves, Inc. DUAL DISC SPRING LOADED WAFER CHECK VALVES FEATURES Light weight, versatile design 80% to 90% less than conventional full-body swing check valves Dual Disc open to 80 degrees Spring-loaded

More information

HP-SERIES HIGH PERFORMANCE BUTTERFLY VALVES

HP-SERIES HIGH PERFORMANCE BUTTERFLY VALVES BFV-2 HP-SERIES HIGH PERFORMANCE BUTTERFLY VALVES Rev. 09/09 HP-SERIES HIGH PERFORMANCE BUTTERFLY VALVES Now you can turn high pressure applications into low risk decisions by turning to high performance

More information

Plastic-Lined Piping Systems The Next Generation of Safety, Quality and Innovation

Plastic-Lined Piping Systems The Next Generation of Safety, Quality and Innovation Plastic-Lined Piping Systems The Next Generation of Safety, Quality and Innovation BAUM America Corp 3 PPSI Circle, Charleston, WV 25312 Phone: Fax: (304) 343-2573 E-Mail: info@baumamericacorp.com office@baumamericacorp.com

More information

E STORE PRICELIST 10/11/2017. E Store Pricelist Page No 1

E STORE PRICELIST 10/11/2017. E Store Pricelist Page No 1 E STORE PRICELIST 10/11/2017 Page No 1 Index Page No Description Make Size range 4 Pricelist of M.S & G.I Pipes as per IS -1239 part I / IS 3589 JINDAL/TATA ½ to 6 Pricelist of C.S seamless Non IBR & IBR

More information

Forged High Pressure Pipe Fittings

Forged High Pressure Pipe Fittings Forged High Pressure Pipe Fittings Forged High Pressure Pipe Fittings Pressure Class Socket Weld Forged Fittings Products Dimension Specifications Pressure Class Threaded Forged Fittings Products Dimension

More information

Pumping trust. Worldwide. CRI Valves. The new standard bearer. BUTTERFLY VALVES PRODUCT

Pumping trust. Worldwide. CRI Valves. The new standard bearer. BUTTERFLY VALVES PRODUCT Pumping trust. Worldwide. CRI Valves. The new standard bearer. BUTTERFLY VALVES PRODUCT CATALOGUE PROCESS IN CHEMICAL PHARMACEUTICAL POWER PLANT DISTILLERY PAPER SUGAR DRILLING RIGS WATER TREATMENT PLANTS

More information

Materials : Ductile iron EN GJS 500-7, PTFE seat

Materials : Ductile iron EN GJS 500-7, PTFE seat Seat Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 40 to 300 mm Between flanges PN10/16-25 C + 200 C Max Pressure : 16 Bars up to DN150 Specifications : Long neck for isolation Lug

More information

industrial and economy pipe fittings PVC-U Solvent Cement WELD-ON REGULAR 719 Size Code Price 500ml tin

industrial and economy pipe fittings PVC-U Solvent Cement WELD-ON REGULAR 719 Size Code Price 500ml tin pvcu fittings mm sizes industrial and economy pipe fittings fittings mm sizes 68 Photo: Chlor Generators Ltd Available in a wide range of mm sizes from 10mm to 500mm, and in a choice of pressure ratings

More information

Diaphragm Valve, Metal

Diaphragm Valve, Metal iaphragm Valve, Metal Construction The GEMÜ manually operated 2/2-way metal diaphragm valve has a non-rising handwheel and an integral optical position indicator as standard. Features Suitable for inert

More information

L&T VALVES BUSINESS GROUP A

L&T VALVES BUSINESS GROUP A Larsen & Toubro Limited (L&T) is a US $ 5 billion engineering and construction company, with a strong presence in manufacturing, services and Information Technology. L&T was founded in 1938 by two Danish

More information

Section 14. Gate Valves

Section 14. Gate Valves Section 14 Gate Valves 221 A-Gate Brass Gate Valve S Brass Brass Brass Brass and Wheel Ductile Iron Threading ISO 228 Thread BSP 180 C 16 bar General Purpose Brass Gate Valve AGVFF/015 15 43 85 50 0.24

More information

88A-100 Series. Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 STANDARDS COMPLIANCE STANDARD FEATURES

88A-100 Series. Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 STANDARDS COMPLIANCE STANDARD FEATURES Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108 Type 1215 Chrome Plated 9. Gland Plate 302 or 304 SS 10. Stem Nut 316 SS 11.

More information

FASANI PRESSURE SEAL CAST GLOBE VALVES - STYLE B Y AND T PATTERN

FASANI PRESSURE SEAL CAST GLOBE VALVES - STYLE B Y AND T PATTERN A wide range of globe valves specifically designed for high pressure and high temperature applications, where low pressure loss is required. FEATURES GENERAL APPLICATION Our pressure seal globe valves

More information

Prem Chem Butterfly Valves

Prem Chem Butterfly Valves 10 butterfly Valves Prem Chem Butterfly Valves butterfly Valves 11 Design standards: gb12238, API609, MSS SP-67, MSS SP-68 Butterfly valves have become very popular because of compactness, weight and ease

More information

Totaiyo Steel Industry トタイヨ 鉄鋼業界. Manufacturers of Pipe Fittings

Totaiyo Steel Industry トタイヨ 鉄鋼業界. Manufacturers of Pipe Fittings Y IS R QUALIT AS O D 'S RE G TE L LY S U RA NC E ISO Totaiyo Steel Industry トタイヨ 鉄鋼業界 Manufacturers of Pipe Fittings 900 PROFILE The Company TOTAIYO is the brand name of the flange, fittings manufacturing

More information

3L/T 2100F-F Series. Ball Valve, 3 Way Class 150 (150# FE) 150# Flanged Ends, Side Entry, 1/2" - 6" Stainless or Carbon Steel.

3L/T 2100F-F Series. Ball Valve, 3 Way Class 150 (150# FE) 150# Flanged Ends, Side Entry, 1/2 - 6 Stainless or Carbon Steel. L/T-2100F-BF-CS Series L/T-2100F-BF-S6 Series Quick Spec Product Scope Size Range 1/2" - 6" 150# Flanged Ends Port Type Full Port Port Type L-Port or T-Port Port Orientation Side Entry Pressure Rating

More information

Technical Manual. Register 18 Contents - T4E

Technical Manual. Register 18 Contents - T4E Page: 1 Contents Register 18 Contents - T4E Page Technical Data T4E-1, DN½ to DN6...2 Technical Data T4E-1, DN8 to DN12...3 Technical Data T4E-2, DN15 to DN150...4 Technical Data T4E-2, DN200 to DN300...5

More information

CONFIGURATION OF CABLE SUPPORT SYSTEMs

CONFIGURATION OF CABLE SUPPORT SYSTEMs CONFIGURATION OF CABLE s CABLE TRUNKING Page 4 - page 7 CABLE TRAY Page 8 - page 11 CABLE LADDER Page 12 - page 14 3 SS249/ IEC 61084 COMPLIED STEEL SURFACE CABLE TRUNKING CEE PRODUCT CODE SS-CEE 6 3 (#)

More information

Section 7. Socket Weld and Threaded Fittings. Socket Weld and Threaded Fittings 7-1

Section 7. Socket Weld and Threaded Fittings. Socket Weld and Threaded Fittings 7-1 Section 7 Socket Weld and Threaded Fittings This Section contains dimension and tolerance information extracted from American and British specifications applicable to socket weld and threaded fittings.

More information

HP 16 Epoxy Fittings (Filament wound with reinforced epoxy inner liner - Compatible with Red Thread and Green Thread HP 16 piping systems)

HP 16 Epoxy Fittings (Filament wound with reinforced epoxy inner liner - Compatible with Red Thread and Green Thread HP 16 piping systems) HP 16 Epoxy Fittings (Filament wound with reinforced epoxy inner liner - Compatible with Red Thread and Green Thread HP 16 piping systems) CHEMICAL INDUSTRIAL Fiber Glass Systems provides a broad range

More information

MFP14, MFP14S and MFP14SS Automatic Pumps

MFP14, MFP14S and MFP14SS Automatic Pumps Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

KEYSTONE BUTTERFLY VALVE PARASEAL RANGE

KEYSTONE BUTTERFLY VALVE PARASEAL RANGE The ParaSeal range features a proven disc, shaft and seat arrangement designed for use in high pressure and high velocity applications FEATURES GENERAL APPLICATION Water, food and beverage processing,

More information

GLOBE CONTROL VALVES FOR CRYOGENIC SERVICE

GLOBE CONTROL VALVES FOR CRYOGENIC SERVICE GLOBE CONTROL VALVES FOR CRYOGENIC SERVICE 1-6940 Cryo valves are especially designed for cryogenic service. The construction is the same of 1-6941 and 1-6943 standard globe valves with the exception of

More information

KEYSTONE BUTTERFLY VALVE PARASEAL RANGE

KEYSTONE BUTTERFLY VALVE PARASEAL RANGE The ParaSeal range features a proven disc, shaft and seat arrangement designed for use in high pressure and high velocity applications FEATURES GENERAL APPLICATION Water, food and beverage processing,

More information

JUST PIPING, JUST FITTING. A Comprehensive Integrated Solution For Piping Systems

JUST PIPING, JUST FITTING. A Comprehensive Integrated Solution For Piping Systems JUST PIPING, JUST FITTING A Comprehensive Integrated Solution For Piping Systems SF 01 DUCTILE IRON PIPE FITTINGS FD1011 FD1021 FD1022 FD1031 FD1102 FD1103 FD1111 FD1121 Double Flanged Piece Flanged spigot

More information

Control Components Pty Ltd. Drawing Number. Indicator Model Overview A 66.01A Side flanged connection

Control Components Pty Ltd. Drawing Number. Indicator Model Overview A 66.01A Side flanged connection ABN 24 8 175 293 PO Box 212 Caringbah NSW 1495 Sydney Australia ph: +61 ()2 9542 8977 fx: +61 ()2 9542 7978 www.controlcomponents.com.au HELP@controlcomponents.com.au Magnetic Visual Level Indicators made

More information

Series Low Pressure Steam Heating Boiler Safety Valves

Series Low Pressure Steam Heating Boiler Safety Valves 12-200 Series Low Pressure Steam Heating Boiler Safety Valves Section IV Heating Boilers Medium capacity safety valves protect ASME Section IV low pressure steam heating boilers. Cast bronze, full nozzle

More information

*Applies to 6 x 4" No. 650 Reducer only. C to E. No No º Elbow Approx. Wgt. Each Lbs. kg. C to E Inches mm JOB/OWNER CONTRACTOR ENGINEER

*Applies to 6 x 4 No. 650 Reducer only. C to E. No No º Elbow Approx. Wgt. Each Lbs. kg. C to E Inches mm JOB/OWNER CONTRACTOR ENGINEER SEE VITAULI PULIATION 0.0 FOR DETAILS TS fittings for use with Style 606 copper connection couplings or Style 64 Vic-Flange Adapters. Fittings are full flow, standard radius wrought copper supplied roll

More information

Technical Manual. Register 25 CONTENTS - AKH2-TAT

Technical Manual. Register 25 CONTENTS - AKH2-TAT D-88 Ahaus Postfach 112 D-81 Ahaus Telefon: +9(0) 21-8-100 Fax: +9(0) 21-8-200 Register: 2 Page: 1 Date: 0.2008 Contents Register 2 CONTENTS - AKH2-TAT (TAT = Type Acceptance Testing) Page Technical Data

More information

EXTRACTION CHECK VALVES TYPE C09.6

EXTRACTION CHECK VALVES TYPE C09.6 Application Extraction check valves are valves used to to prevent the back flow of the service fluid in extraction and bleed lines of steam turbines. Each extraction check valve is designed exactly for

More information

Certifications & Approvals

Certifications & Approvals Industrial Certifications & Approvals Matco-Norca is committed to maintaining a high standard of quality for all the products we offer. Most products in this catalog are labeled with a designated approval

More information

Ball Valves. Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ Stainless Steel Technical Data 2160 PSI ¼

Ball Valves. Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ Stainless Steel Technical Data 2160 PSI ¼ Ball Valves Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ - 4...3 316 Stainless Steel Technical Data 2160 PSI ¼ - 4...3 Style BVSC...4 Carbon Steel Technical Data 2200 PSI ¼ - 2...5

More information

LCS6822 (Class 150) LCS7822 (Class 300)

LCS6822 (Class 150) LCS7822 (Class 300) Revision 8/22/2012 high performance butterfly valve LCS6822 (Class 150) LCS7822 (Class 300) APPLICATIONS Ideally suited for Commercial, Industrial and Mechanical HVAC Services. Use in other applications

More information

GRP backing flanges DIN 2501 Flange connecting dimension PN10 WORK STANDARD. GRP backing flanges made of Polyester resin.

GRP backing flanges DIN 2501 Flange connecting dimension PN10 WORK STANDARD. GRP backing flanges made of Polyester resin. GRP backing flanges DIN 2501 Flange connecting dimension PN10 1310-WN-en 06 10.2002 GRP backing flanges made of Polyester resin. D 45 e d2 d1 b1 k Flange connecting dimensions according to DIN 2501 Part

More information

+GF+ CLASS 267. Factory Mutual Approved. HDPE Pipe & Pipe Fittings GEORG FISCHER PIPING SYSTEMS centralplastics.

+GF+ CLASS 267. Factory Mutual Approved. HDPE Pipe & Pipe Fittings GEORG FISCHER PIPING SYSTEMS centralplastics. Factory Mutual Approved CLASS 26 HDPE Pipe & Pipe Fittings CENTRAL PLASTICS 8.499.692 Table Of Contents 18-1 Design-Flow HDPE IPS HDPE Pipe (Iron Pipe ) 4-24 18-2 PE 368 HDPE Physical Properties - FM 18-3

More information

Keystone Butterfly valve ParaSeal range

Keystone Butterfly valve ParaSeal range The ParaSeal range features a proven disc, shaft and seat arrangement designed for use in high pressure and high velocity applications Features General application Water, food and beverage processing,

More information

509F. Multi-Port Flanged Ball Valve. Full Port ISO 5211 Mounting Pad. For Automated & Manual Service. General Chemical. Industrial

509F. Multi-Port Flanged Ball Valve. Full Port ISO 5211 Mounting Pad. For Automated & Manual Service. General Chemical. Industrial 50F Multi-Port Flanged Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial and Other Corrosion Resistant Applications The 50F Series //5-Way Flanged Ball

More information

Kunkle Bailey 756 safety relief valve

Kunkle Bailey 756 safety relief valve The 756 safety valve combines a top piston guided valve and an unobstructed seat bore with a full lift capability, giving maximum discharge capacity Features Design incorporates an adjustable blowdown

More information

Diaphragm Valve, Metal

Diaphragm Valve, Metal Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. Normally Closed, Normally

More information

Materials : Carbon steel or stainless steel

Materials : Carbon steel or stainless steel Size : Ends : Min Temperature : Max Temperature : DN 50 to 350 mm Between flanges GN 25-20 C + 210 C Max Pressure : 25 Bars Specifications : Double eccentric Wafer type Fire safe according to API 607 Iso

More information

Hopkinsons CONTENTS SCHEDULE OF SHELL BOILER MOUNTINGS. Hopkinsons. Safety Valves 5. Boiler Stop Valves 17. Feed Check Valves 18. Blowdown Valves 20

Hopkinsons CONTENTS SCHEDULE OF SHELL BOILER MOUNTINGS. Hopkinsons. Safety Valves 5. Boiler Stop Valves 17. Feed Check Valves 18. Blowdown Valves 20 Hopkinsons SCHEDULE OF SHELL BOILER MOUNTINGS Quality assurance Weir Power & Industrial operates quality programmes to cover the full scope of their activities. Comprehensive quality systems have been

More information

Fasani Pressure Seal Cast Gate Valves - Style A Wedge Gate and Parallel Slide

Fasani Pressure Seal Cast Gate Valves - Style A Wedge Gate and Parallel Slide A series of robust gate valves specifically designed for applications in the power industry Features General application Our pressure seal -Style A gate valves are recommended for several applications

More information

' ' ' ' LISTED Elbows Tees Crosses Wyes Reducers Flanges Converters Gaskets Nuts&Bolts

' ' ' ' LISTED Elbows Tees Crosses Wyes Reducers Flanges Converters Gaskets Nuts&Bolts .., I.,.,... I I...... I I ',,,, ", Elbows Tees Crosses Wyes Reducers Flanges Converters Gaskets Nuts&Bolts ' ; i ',,.) I ' ' ' ' AWWA C Class 50 (3"' ANSI B. Class 5 ("' ANSI B. Class 50 (3"' c@us LISTED

More information

PPF PIPE FITTINGS (PAHANG) BUTTWELD FITTINGS

PPF PIPE FITTINGS (PAHANG) BUTTWELD FITTINGS PPF PIPE FITTINGS (PAHANG) BUTTWELD FITTINGS 1 Pahang Pipe Fittings PPF is one of the leading manufacturers of Buttweld fittings and flanges. Our highly specialized product range is capable of catering

More information

BALL VALVE VALVE SOLUTIONS. for Corrosive Applications. Manufacturer of PFA/FEP/PTFE Lined & Plastic Valves, Pipes & Pipe Fittings

BALL VALVE VALVE SOLUTIONS. for Corrosive Applications. Manufacturer of PFA/FEP/PTFE Lined & Plastic Valves, Pipes & Pipe Fittings BALL VALVE VALVE SOLUTIONS for Corrosive Applications Manufacturer of PFA/FEP/PTFE Lined & Plastic Valves, Pipes & Pipe Fittings About Us UNP Polyvalves is manufacturing Corrosive application valves since

More information

The applicable material specifications for ductile iron and rubber gaskets apply:

The applicable material specifications for ductile iron and rubber gaskets apply: 72 COUPLINGS - Grinnell Copper Grooved System is designed for joining copper tube size components 2" to 8" (54,0mm to 206,4mm) type K, L, M and DWV. All couplings and fittings are rated for working pressures

More information

MADE OF STAINLESS...

MADE OF STAINLESS... MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 15 to 150 mm ( NPS 1/2" to 6" ) Flanges ISO PN20 ANSI 150 R.F. - 10 C + 180 C Max Pressure : 20 Bars Specifications : ISO 5211

More information