STAINLESS STEEL FITTINGS AND VALVES
|
|
|
- Jemimah Barton
- 5 years ago
- Views:
Transcription
1 STAINLESS STEEL FITTINGS AND VALVES RHEINMAIN FITTINGS
2 STAINLESS STEEL SCREWED FITTINGS EG 23 A / G-33 Weld nipple /8" 6", thread EN 0226, ISO 7- Standard and special length Material 36/304 36Ti/32 EG 23 / G-32 Barrel nipple EN 024 /8" 6", thread EN 0226, ISO 7- Standard and special length Material 36/304 36Ti/32 EG 22 / G-3 Running nipple EN 024 /8" 6", thread ISO 228/ Standard and special length Material 36/304 36Ti/32 EM 6 / G-323 Full sockets EN 024 /8" 6", thread EN 0226, ISO 7- Standard and special length Material 36/304 36Ti/32 EM 6 D / G-324 Half sockets EN 024 /8" 6", thread EN 0226, ISO 7- Material 36/304 36Ti/32 EG 6 / G Bends, M/M EN 024 /8" 2", thread EN 0226, ISO 7- Material 36/304 36Ti/32 EF 30 / F-46 Hexagon nuts /8" 4", thread EN 0226, ISO 7- Material 36/304 EF 90 / F-4 90 Elbows, F/F /8" 4", thread EN 0226, ISO 7- Material 36/304 EF 92 / F Street elbows, M/F /8" 4", thread EN 0226, ISO 7- Material 36/304 EF 90 R / F-4 R 90 Red, elbows, F/F /4" x /8" 2" x /2", thread EN 0226, ISO 7- Material 36/304 EF 20 / F Elbows /8" 4", thread EN 0226, ISO 7- Material 36/304 EF 30 / F-42 Tees /8" 4", thread EN 0226, ISO 7- Material 36/304 ALL UNIONS ALSO FULLY MACHINED AVAILABLE EF 30 R / F-42 R Red. Tees /4" x /8" x /4" 2" x /2" x 2", thread EN 0226, ISO 7- Material 36/304 EF 80 / F-422 Crosses /8" 4", thread EN 0226, ISO 7- Material 36/304 EF 340 / F-42 A Unions conical, F/F /8" 4", thread EN 0226, ISO 7- Material 36/304 EF 330 / F-42 B Unions flat, F/F /8" 4", thread EN 0226, ISO 7- Material 36/304
3 STAINLESS STEEL SCREWED FITTINGS EF 34 / F-423 A Unions conical, M/F /8" 4", thread EN 0226, ISO 7- Material 36/304 EF 33 / F-423 B Unions flat, M/M /8" 4", thread EN 0226, ISO 7- Material 36/304 EF 340 S / F-47 A Unions conical, butt weld /8" 4" Material 36/304 EF 330 S / F-47 B Unions flat, butt weld /8" 4" Material 36/304 EF 280 / F-43 Hexagon nipples /8" 4", thread EN 0226, ISO 7- Material 36/304 EF 245 / F-45 Hexagon red. nipples /8" 4", thread EN 0226, ISO 7- Material 36/304 EF 936 / G-325 Hose nipples /8" 2", thread EN 0226, ISO 7- Material 36/304 EF 24 / F-44 Bushing /8" 4", thread EN 0226, ISO 7- various reductions Material 36/304 EF 240 / F-442 Reducing couplings /8" 4", thread EN 0226, ISO 7- various reductions Material 36/304 EF 300 / F-432 Round caps /8" 4", thread EN 0226, ISO 7- Material 36/304 EF 30 / F-463 Hexagon caps /8" 4", thread EN 0226, ISO 7- Material 36/304 EF 29 / F-433 Square plugs /8" 4", thread EN 0226, ISO 7- Material 36/304 For the dimensions of the casted 50 lbs BSP fittings please refer to the measurement table. We can deliver all articles also with an NPT thread. Other materials available upon request. EF 292 / F-452 Hexagon plugs /8" 4", thread EN 0226, ISO 7- Material 36/304 F-453 Hexagon head screw plugs Heavy type /8" 2", thread EN 0226, ISO 228/, Material 36/304 EF 400 Pipe clamps DIN 3567a and other standards on request Material 32/36Ti 36/304
4 STAINLESS STEEL BUTT WELD FITTINGS AND FLANGES Elbows: Dimensions: Material: Produced from either seamless or welded pipes /8" 24", Sch 5S/0S/40S/80S/60S/XXS ASTM A 403 ANSI B 6.9/90 and 45, L.R./S.R. DIN 2605 part and part 2 304, 36, 36L, 304L, 36Ti, 32, nickel alloys, duplex, superduplex, copper-nickel, all materials for cold forming Tees and reducers: Dimensions: Material: seamless or welded /8" 24", Sch 5S/0S/40S/80S/60S/XXS ASTM A 403 ANSI B 6.9 DIN 265, DIN , 36, 36L, 304L, 36Ti, 32, nickel alloys, duplex, superduplex, copper-nickel, all materials for cold forming Weld neck flanges 50lbs/300lbs ASTM A 82, ANSI B 6.5 DIN 2627 and DIN L/36L/32/36Ti Slip on flanges 50lbs/300lbs ASTM A 82, ANSI B 6.5 DIN 2642 and DIN L/36L/32/36Ti Blind flanges 50lbs/300lbs ASTM A 82, ANSI B 6.5 DIN 2527 PN L/36L/32/36Ti Threaded flanges DIN 2566 PN 0/6 DIN 2567 PN 40 /8" 4", EN L/36L/32/36Ti Pressed collars DIN 2642 PN 0 DIN 264 PN 40 Stub ends MSS SP L/36L/32/36Ti Lapped flanges in aluminium Caps ASTM A 403 ANSI B 6.9, DIN 267/DIN 280 DIN L/36L/32/36Ti???????????????????????????
5 STAINLESS STEEL VALVES A-590 TD -Pc. Ball valve 000PSI threaded ends EN 0226 red. bore, /4" 2" A-62 TLD 2-Pc. Ball valve 000PSI face to face DIN 3202/M3 threaded ends EN 0226 full bore, /4" 3" A-622 TLD 2-Pc. Ball valve 000PSI threaded ends EN 0226 full bore, /4" 2" A-660 F 2-Pc. DIN flanged Ball valve PN 6 full bore DIN A-64 TLD 3-Pc. Ball valve 000PSI threaded ends EN 0226 full bore, /4" 4" A-64 TSLD 3-Pc. Ball valve 000PSI Butt weld ends full bore, /4" 4" A-730 TT/TL 3-Way Ball valve 000PSI threaded ends EN 0226 full bore, /2" 2" A-680 F -Pc. Wafer flnged ball valve 000PSI DN 5-50/DN CF8M ALL BALL VALVES AVAILABLE WITH LOCKING DEVICE. ALSO THE THREADED VALVES AVAILABLE WITH THREAD ISO 228. A-670 T Gate valve 200PSI threaded ends EN 0226 /2" 2" A-650 T Globe valve 200PSI threaded ends EN 0226 /4" 2" A- T Y-Spring check valve 200PSI threaded ends EN 0226 /4" 2" A-690 T Swing check valve 200PSI threaded ends EN 0226 /4" 2" A-26 T Y-Strainer 600PSI threaded ends EN 0226 /4" 2" A-64 ST 3-Pc. Ball valve with actuator /4" 4" 2-Pc. Flanged ball valve with actuator
6 CASTED, FORGED AND TURNING WORK PIECES AVAILABLE ACC: TO CUSTOMER SPECIFICATION
7 STAINLESS STEEL FITTINGS, TUBES, PLATES AND BARS Stainless steel pipe couplings and repair clamps universal installations for all sorts of pipe and applications tensile strength and not tensile strength, for all materials, 26.9 mm mm Stainless steel compression fittings Single ferrule and double ferrule 6-42 mm, DIN EN ISO (DIN 2353) material 36Ti/36L Stainless steel press fittings with DVGW approval 5 mm - 08 mm Material.440/.4404 Stainless steel tubes acc. to DVGW W x.0 mm - 08mm x mm Material.440/.4404 Stainless steel welded tubes DIN EN 027-7, Pk ASTM A-32 test certificate EN AD-W 2 upon request manufacturing length of approx. 6000mm Stainless steel seamless tubes DIN EN 026-5, ASTM A-32 test certificate EN AD-W 2 upon request manufacturing length of approx. 6000mm Stainless steel long products round bars, flat bars, angles, square bars EN Material 36 Ti, 32, 304, 36 etc. Stainless steel sheets and plates EN Tolerances En 0259 Material 36 Ti, 32, 304, 36 etc. Fittings produced out of steel, malleable cast iron, aluminium, copper and brass also available upon request (please see
8 STAINLESS STEEL AISI 304 DIN X 5 CrNi 8 0 C SI Mn Cr 0.07 Chemical compositions Mo Ni other alloys 95 Rp 0.2 % (N/mm 2 ) yield strength Rp % (N/mm 2 ) yield strength 230 Range of applications RM (N/mm 2 ) tensile strength Attributes other names German M-No L X 2 CrNi 9 X 6 CrNiTi 8 0 X 6 CrNiNb Ti 5 x % C Nb 0 x % C Water and slightly contaminated waste water, foodstuffs and organic acids, generally up to 4.5 ph unchanging in agressive low chlorides. V 2 A CF8M G X 5 CrNiMo Rustless, cast for valves, pumps and vessels L X 5 CrNiMo X 2 CrNiMo Ti 5 x % C Higher resistance than first category. Prefered in chemical installations, purifaction plants, paper industries, esp. at higher chloride concentration. V 4 A Ti 36 36L X 6 CrNiMoTi X 5 CrNiMo X 2 CrNiMo A greater resistance level than the previous category against non oxidizing acids and aggressive chlorides UNS 3254 X NiCrMoCuN Cu =.0 N = Highest resistance in acid chloridecontaining mediums, e.g. sea-water and strong sulfuvic acid. Avesta 254 SMO L X NiCrMoCu Cu = Highest resistance against phosphate and sulphate mediums coinciding with chloride-contaminations. Uranus B 6 Uddeholm 904L.4539 UNS S 3808 X 2 CrNiMoN N = High resistance to fractures in neutral chloriecontaining mediums and acetous gasses. FAL C 223 AF Metric conversions DN o. d. mm /8 0.2 / /8 7.2 / / / / / Further dim. od/mm diff. wallth , , RHEIN- MAIN FITTINGS RM Fittings Handelsgesellschaft mbh Lammertstraße Offenbach Fon: (0 69) Fax: (0 69) weigand@rm-fittings.de
LATEST ARRIVALS CATALOGUE STOCK
LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL
Stainless Spring Steel Strip
Stainless Spring Steel Strip Tolerances according to DIN EN ISO 9445-2:2010-06 Chart 1 (fine tolerance) or as agreed Grade No.* Grade Name Standard Tensile Strength (Rm) Comparable 1.4301 X 5 CrNi 18-10
flowconme Types of Fittings Available Wall Thickness Sch 5 - Sch 160 (Sch 5s - Sch 160s) Others available upon special request
FITTINGS Overview Types of Fittings Available 45, 9 Elbows, 18 Returns (Short & Long Radius) Tees & Crosses (equal & reducing), Reducers (concentric & eccentric), Caps, Stud Ends, Weldolets, Outlets, Laterals
FLANGES & GASKETS. ITEM No. QTY. DESCRIPTION SIZE MATERIAL MASS (kg) 1 1 FLANGE RFWN - DN # Sch 80 DN100mm 300# Sch 80 A
FLANGES & GASKETS Most of the flanges have intelligent custom properties built into their design tables (making extensive use of the concatenate function) to populate your Bills of Materials (example below).
Direct Mount Packages
800.783.7836 Direct Mount Packages BEV9 Actuated package Size range: 1/ - Pressure rated for 1000 WOG 316 Stainless steel construction Live loaded stem seal design Full Port Threaded Ends (F) EZ99 Actuated
Valves for general purpose & industry
Valves for general purpose & industry Carbon steel & stainless steel ball valves 1 piece body... page 14 2 piece body... page 14 2 piece body - High temperature... page 14 2 piece construction - 3 way...
Copper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10)
Offshore OSNA -10 Copper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10) KME Germany GmbH & Co. KG Offshore OSNA -10 [GB] Content KME - The Company 1 The Material 2 Offshore Product Range 3 Pipes
QUALITY EX STOCK. Summary of available products ISSUE 3. Bars Pipes and tubes Fittings Hollow bars Angles Special sections Plates and sheets
QUALITY EX STOCK Summary of available products Bars Pipes and tubes Fittings Hollow bars Angles Special sections Plates and sheets ISSUE 3 STAPPERT The brand for steels. STAPPERT offers a diverse range
Tri-Clamp ferrules & blanks
Tri-Clamp ferrules & blanks Generally, Tri-Clamp ferrules, blanks and adapters are produced by CNC turning from stainless steel bar, in AISI 316L 1.4404 material. The material conforms typically to ASTM
PRESSURE GAUGES DIAL THERMOMETERS PRESSURE & TEMP. SWITCHES PRESSURE & TEMP. TRANSMITTERS PIPES, PIPE FITTINGS & FLANGES
WATER METERS VALVES & COCKS PRESSURE GAUGES DIAL THERMOMETERS PRESSURE & TEMP. SWITCHES PRESSURE & TEMP. TRANSMITTERS PIPES, PIPE FITTINGS & FLANGES FILTER, REGULATOR & LUBRICATORS W IKA V I INSTRUMENTS
Copper-Nickel Alloys for Seawater Piping Systems (CuNi 90/10 and CuNi 70/30)
Shipbuilding OSNA -10 and OSNA -30 Copper-Nickel Alloys for Seawater Piping Systems (CuNi 90/10 and CuNi 70/30) KME Germany GmbH & Co. KG Shipbuilding - OSNA -10 and OSNA -30 [EN] Content KME - The Company
SEAMLESS & WELDED PIPE
SEAMLESS & WELDED PIPE SPECIFICATIONS: LENGTHS: ASTM A312M-08 6.1 METRE/RANDOMS FINISH: WELDED ANNEALED & PICKLED SEAMLESS COLD FINISH/HOT FINISH NB PIPE SIZE SIZE WELDED SEAMLESS APPROX. WGT Inch mm O.D.
Copper-Nickel Seawater Piping Systems Offshore product range: Pipes, fittings and flanges of OSNA 10
Copper-Nickel Seawater Piping Systems Offshore product range: Pipes, fittings and flanges of OSNA 10 KME Germany AG & Co. KG OSNA 10 [GB] Member of the KME Group Contents Your Partner KME The Material
LATEST PRICE LISTS PIPES & TUBES FITTINGS VALVES CONTACT DETAILS: AUTHORISED DISTRIBUTORS of: JINDAL PIPES LTD. MAHARASHTRA SEAMLESS LTD.
LATEST PRICE LISTS 2017 PIPES & TUBES AUTHORISED DISTRIBUTORS of: JINDAL PIPES LTD. MAHARASHTRA SEAMLESS LTD. SANT INDUSTRIAL VALVES FITTINGS VS FORGED FITTINGS C BRAND ISI APPROVED G.I. FITTINGS VALVES
RAIMONDI. High pressure forged globe valves to guarantee the pressure envelope integrity on harsh services.
Fig. 6022-6025 RAIMONDI High pressure forged globe valves to guarantee the pressure envelope integrity on harsh services. Features Forged body materials of highest quality, all in compliance with ASME
Instrumentation Products F Series Manifolds and Multi-Way Cocks
Instrumentation Products F Series Manifolds and Multi-Way Cocks Introduction Introduction The AS-Schneider Group with its headquarters in Germany is one of the World s Leading Manufacturers of Instrumentation
+91-8048078009 Kanti Enterprises http://www.kantienterprises.in/ We are amongst the leading Manufacturers, Exporters and Suppliers of this impeccable range of Products like Pipes & Tubes, Flanges, Pipe
APPENDIX: TECHNICAL INFORMATION
Materials Test and Operation Specifications Quality Assurance MATERIALS: Cast Iron Grey iron GD-250 GG-25 to DIN 1691-1964 Grade 220/250 minimum to BS 1452-1990 Class 35B/40B to ASTM-A48-1974 250-200 -
RAIMONDI. High pressure forged check valves recommended to prevent flow reversal in severe applications.
Fig. 6042 6045 RAIMONDI High pressure forged check valves recommended to prevent flow reversal in severe applications. Features High quality forged materials to guarantee pressure envelope integrity, all
Copper & Copper Nickel. Pipes Fittings Flanges.
Copper & Copper Nickel Pipes Fittings Flanges BOMYUNG METAL.Co.,Ltd CONTENTS 01 COPPER PIPES COPPER PIPES CHEMICAL COMPOSITION / MECHANICAL PROPERTIES / WELDING INSTRUCTION / PIPE / COIL COPPER FITTINGS
STANDARDS and SPECIFICATIONS
ANSI (American National Standards Institute) ANSI B31.4 - Liquid petroleum transportation piping system. ANSI B31.4 - Gas transmission and distribution piping system. API (American Petroleum Institute)
- Seamless pipe, Welded steel pipe - Standard: ASME/JIS/DIN.
CARBON STEEL PIPES STAINLESS STEEL PIPES - Seamless pipe, Welded pipe (ERW), Spiral welded pipe. - Seamless pipe, Welded steel pipe - Standard: ASME/JIS/DIN. - Standard: ASME/JIS - Material: ASTM A53/A106
VALFONTA PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS
PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS The S1 model is self-operated bellows sealed pressure excess valve. This series of
Full Traceability. Material Specification. Raw Material Code. Heat Treatment
All J.B. Smith swages, bull plugs, tubing and casing nipples, and chambers are traceable to the original mill test report. To ensure traceability, all fittings are steel stamped as follows: Material Specification
P R O D U C T R A N G E
PRODUCT RANGE OVERVIEW Range of Materials AUSTRALIAN PIPELINE VALVE BRAND Australian Pipeline Valve (APV) manufactures a complete Cast iron, Ductile iron (GGG40) range of ASME, API, BS and AS valves such
FKB INDÚSTRIA DE EQUIPAMENTOS LTDA. KNIFE GATE VALVE VGU-01 (Rev. 02/2016)
General Description The model FKB VGU-01 is developed in accordance with MSS-SP 81 Standard and its function is blocking the fluid sewage. They are light equipments for semi-lug body and flange installation,
FKB INDÚSTRIA DE EQUIPAMENTOS LTDA. KNIFE GATE VALVE VGU-29 (Rev. 02/2016)
General Description The model FKB VGU-29 brings an economic solution to block abrasive and corrosive fluid sewage for granulometry until 5mm. They are light equipments, to be installed through flanges,
Totaiyo Steel Industry トタイヨ 鉄鋼業界. Manufacturers of Pipe Fittings
Y IS R QUALIT AS O D 'S RE G TE L LY S U RA NC E ISO Totaiyo Steel Industry トタイヨ 鉄鋼業界 Manufacturers of Pipe Fittings 900 PROFILE The Company TOTAIYO is the brand name of the flange, fittings manufacturing
Forged steel socket Welding fittings 6 ~ 13. Forged steel threaded fittings 14 ~ 20. Forged steel outlet fittings 21 ~ 23
Forged steel socket Welding fittings 6 ~ 13 Forged steel threaded fittings 14 ~ 20 Forged steel outlet fittings 21 ~ 23 Standard threads specifications 24 ~ 25 Comparison of astm specifications and similar
Xiamen Landee Industries Co., Ltd was founded on 14th May 2001;
ABOUT US Xiamen Landee Industries Co., Ltd was founded on 14th May 2001; Our main products are OCTG, Heat Exchanger Tube, Plate, Pressure Vessel, Line Pipe, Valve, Flange, Fitting, Gasket, Fastener, etc;
ALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN
BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric
3 PC FULL BORE BALL VALVE
Pressure (Bar) 3 PC FULL BORE BALL VALVE 3 PC FULL BORE 1000PSI STAINLESS STEEL THREADED/SOCKET WELD END BALL VALVE Feature: 3 PC Body Design Full Bore, Quarter turn operation Size: 1/4 4 (DN8-100) Working
6. Butterfly Valves & Accessories
1. Plastic Pipes 2. Steel Pipes 3. Penetration Tubes 4. Piping Accessories 5. Needle Valves 6. Butterfly Valves & Accessories 7. Miscellaneous Valves 7 1. PLASTIC PIPES TYPES OF PLASTIC PIPES ADAPTATOR
DESFLEX COMPACT FLANGES
DESFLEX COMPACT FLANGES DESFLEX COMPACT FLANGES The first original Compact Flange designed in full accordance with ASME ANSI PD 5500, Type Approved & Fire Tested. Offering weight savings of up to 88% when
A GUIDE TO PIPE SIZES
A GUIDE TO PIPE SIZES Pipe Strengths To identify the dimensions and strengths of different pipe, it is common to use schedule terminology taken from the ANSI pipe schedule chart. The pipe schedule chart
1.2 REFERENCES.1 American National Standards Institute (ANSI)/ American Society of Mechanical Engineers (ASME)
Issued 2005/06/01 Section 15111 Valves Bronze Page 1 of 6 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01355 Waste Management and Disposal 1.2 REFERENCES.1 American National Standards Institute (ANSI)/
A. American National Standards Institute: 1. ANSI Z Relief Valves for Hot Water Supply Systems.
SECTION 220523 - PLUMBING VALVES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Ball valves. 2. Butterfly valves. 3. Swing check valves. 4. Spring loaded check valves. 5. Water pressure reducing
Forged Fittings. High Technology Valve & Fitting Series
Forged Fittings High Technology Valve & Fitting Series Forged steel socket Welding fittings 6 ~ 13 Forged steel threaded fittings 14 ~ 20 Forged steel outlet fittings 21 ~ 23 Standard threads specifications
The Amodil Group. Specialists In Stainless Steel Long Products
Specialists In Stainless Steel Long Products Specialists In Stainless Steel Long Products Round Hexagon Flat Square Angle Billet Seamless Pipe & Tube Hollow Bar Fittings Over 5,000 tonnes of Stainless
HYGIENIC TUBE & PROCESS COMPONENTS DIN/ISO/METRIC
HYGIENIC TUBE & PROCESS COMPONENTS DIN/ISO/METRIC EN DIN (ISO/Metric) The most important norm range within Europe for industrial (non Food) applications consists of 2 dimension ranges. The ISO 1127 dimension
The intelligent stainless steel stock range. Stainless, highly corrosion and heat resistant steels
The intelligent stainless steel stock range Stainless, highly corrosion and heat resistant steels A material grade makes history. Even at the end of the 19th century it was discovered that the corrosion
C&N Industrial Group Limited. Better Pipeline, Better Connection.
C&N Industrial Group Limited Better Pipeline, Better Connection. About C&N Flange & Fitting producing Steel pipe expand & Welding Pipe accessories(jiangsu) Pipeline technology consult Incorporate on C&N
Hi-Seal, high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions.
Hi-Seal, high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions. Features Positive sealing which is mechanically achieved and does not rely
Forged steel socket Welding fittings 6 ~ 13. Forged steel threaded fittings 14 ~ 20. Forged steel outlet fittings 21 ~ 23
Forged steel socket Welding fittings 6 ~ 13 Forged steel threaded fittings 14 ~ 20 Forged steel outlet fittings 21 ~ 23 Standard threads specifications 24 ~ 25 Comparison of astm specifications and similar
800 m. Metric Stainless Steel Pipe Seamless to EN ISO 1127 Produced in approx. 6 m lengths other material, dimensions or welded pipe on request 8.
Metric Stainless Steel Pipe Seamless to EN ISO 1127 Produced in approx. 6 m lengths other material, dimensions or welded pipe on request S 800 m max. operating pressure for 1.4301 for 1.4571 x s PB -No
Yl)HAl STrrl (INDIA) Forged High Pressure Pipe Fittings. All ISO 9001:2003/ ISO 14001:2004 / 8S Ol!SAS 18001:2007 / PED Al'PROl'ED 97/23/EC
Forged High Pressure Pipe Fittings Forged High Pressure Pipe Fittings Summary : Summary : Type 1. Elbow, Tee, Cross, Couplin g, Half Coupling, Cap, Plug, Bushing, Union, HEX. Nipple, Swage 2. nipple, Bull
Section 7 Stainless Steel 316 Threaded Fittings
Section 7 Stainless Steel 316 Threaded Fittings Edition 3 121 [7] STINLESS STEEL 316 THREDED FITTINGS Specifications bout Stainless Steel - Stainless steel can be defined as a steel alloy that has a minimum
-ANSI. maintenance-free. Stop valve with bellows seal,
Stop valve with bellow seal -ANSI ARI-FABA Long Life - Stop valve with bellows seal, maintenance-free ARI-FABA -ANSI Long Life Class 150 with flanges TA-Air (zero emission) TÜV-Test-No. 088-945053 Cast
FKB INDÚSTRIA DE EQUIPAMENTOS LTDA. KNIFE GATE VALVE VGU-05 (Rev. 08/2015)
General Description The FKB Knife-gate valves model VGU-05 brings cost-effective solution to block the flow of abrasive fluids. These are strong equipments to be installed between flanges, which has Wafer
WENZHOU BAIJI VALVE CO.,LTD
API valves Cataloge 2006 All rights reserved by Wenzhou Baiji Valve Co.,Ltd CN. API 600 CAST STEEL VALVES COMPANY INTRODUCTION Wenzhou Baiji Valve Co.,LTD. BJ VALVES, is a diversified global supplier of
Series 240 Type and Type Pneumatic Control Valves Type 3244 Three-way Valve
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve DIN and ANSI versions Application Mixing or diverting valve for process engineering and industrial applications
Duplex Steel & Engineering Company
+91-8048601907 Duplex Steel & Engineering Company https://www.duplexsteel.net/ Incorporated in the year 1996, we at Unisteels and Engg. Co. Pvt. Ltd. are engaged in exporting, supplying variety of Super
Instrumentation Products Gauge Valves and Pressure Gauge Accessories
Instrumentation Products Gauge Valves and Pressure Gauge Accessories Introduction Introduction The AS-Schneider Group with its headquarters in Germany is one of the World s Leading Manufacturers of Instrumentation
Keystone WINN Hi-Seal High Performance Butterfly Valve
m o Keystone WINN Hi-Seal High Performance Butterfly Valve Hi-Seal, high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions Features Positive
VES AL Y V BUTTERFL 60
BUTTERFY VAVES 60 ANSI HIGH PERFORMANCE BUTTERFY VAVES High Performance Butterfly Valves Sealing principle of b eccentric HPBV Zero Offset: Concentric valve (zero offset). Disc rotates around the centre
SERVICE QUALITY RELIABILITY FLEXIBILITY
SERVICE QUALITY RELIABILITY FLEXIBILITY About us: AFS Fittings Service Achim GmbH&Co.KG stands for service solutions for pipe works since 1984. In our own production facility we are aiming to fulfill technically
Stainless Steel Valves
Stainless Steel Valves A-261T Y-Strainer screwed end, PN40, PSI800 Investment casting body Maximum working temperature 230 C The end-to-end length conforms to DIN 3202, Part 4. M8series (PN40) Thread ends
Components: Dimensions / Order Codes Clamp Body. * 1st part of STAUFF Group 4. * Exact outside diameters Ø D1 / Ø D2 (mm) Clamp Body.
Components: Dimensions / Order Codes Clamp Body Clamp Body Colour: Green Material code: PP 4 PP One clamp body is consisting of two clamp halves. 1st part of STAUFF 4 Exact outside diameters Ø D1 / Ø D2
CLASS 400 FORGED BRASS BALL VALVE
CLASS 400 FORGED BRASS BALL VALVE FIG. 214 Screwed body cap, PTFE seats, Blowout-proof stem. Screwed ends to BS 21. Nickel plated body. Chrome plated ball. UNI-FLO NYLON BALL VALVES FIG. 214NS/NB Features:
HOUSE OF INDUSTRIAL RAW MATERIALS
&& lr && Our Customer decides the Quality of products HOUSE OF INDUSTRIAL RAW MATERIALS Web. : www.jaypeeferrometal.com ABOUT US Jaypee Ferro Metal is a leading Manufacturer & Supplier of all Ferrous &
10000F Series. High Pressure Ball Valve 6000 psi WOG (414 bar) Multiple End Connections Carbon, Stainless. Alloy Bar Stock Construction
1F-xxx Series Valve Quick Spec Product Scope Size Range 1/4" 2", (Sch 16 Pipe Bore) 2"Reduced; 3" Double Reduced Body Type 3-pc, non Swing-out design, Optional Ends Pressure Rating up to 6 psi WOG & up
VALFONTA SELF-ACTING PRESSURE REDUCING VALVE M1
SELF-ACTING PRESSURE REDUCING VALVE M1 M1-15A-ENG PRESSURE REDUCING VALVE MODEL M1 VALFONTA MAIN CHARACTERISTICS The M1 model is self-operated bellows sealed pressure reducing valve. This series of regulators
JIS G (SGP)
JIS G 3452-1988 (SGP) Nominal size Outside Diameter Thickness Unit Weight (plain end) A B mm in mm in lb/ft kg/m 6 1/8 10.5 0.413 2.0 0.079 0.282 0.419 8 1/4 13.8 0.543 2.3 0.090 0.438 0.652 10 3/8 17.3
Established in 1982, Modentic Industrial Corporation is involved in the world of stainless steel valves & fittings selling.
Modentic Industrial Corp. ISO 9001 Certified. Established in 1982, Modentic Industrial Corporation is involved in the world of stainless steel valves & fittings selling. Contents A view of valve process
Sempell High Pressure Stop Valves Model VA510 (DIN)
Designed for highest pressure and temperature applications using high alloy or stainless steels. Features T-pattern globe type Body made of forged steel Wear resistant stellite body seat Conical seat with
Valves for building. Y-strainers... page 204 PVC valves Ball valves... page 204 Butterfly valve... page 204 Ball check valve...
Valves for building Ball valves PN25/20... page 194 PN30/20... page 195 PN40/30 - Lead-free brass... page 196 Valve for gas... page 197 Stem extension valves... page 197 3 way valves... page 197 Mini valves...
Grey cast iron Fig. 610 Page 2. Forged steel Stainless steel Fig. 610/612 (Y) Page 4
Thermostatic steam trap CONA M Thermostatic steam trap Thermostatic steam trap PN16 - with flanges (Fig. 610...1) - union with butt weld ends (Fig. 610...5) Grey cast iron Fig. 610 Page 2 Thermostatic
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
Valves for building. Y-strainers... page 272 PVC valves Ball valves... page 272 Butterfly valves... page 272 Ball check valves...
Valves for building Ball valves PN25/20... page 262 PN30/20...pages 262 to 263 PN40/30 - Lead-free brass... page 264 Valve for gas... page 265 Stem extension valves... page 265 3 way valves... page 265
Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends
SPECIFICATION See our full range online at: www.vip-ltd.co.uk Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends VIP Product Codes 04/0466 (BSP)
Iron Check Valves Illustrated Index
Iron Check Valves Illustrated Index Iron Body Swing Check Valve Bronze Mounted or All Iron 125 lb. SWP 200 lb. CWP Iron Body Swing Check Valve Bronze Mounted 250 lb. SWP 500 lb. CWP Iron Body Silent Check
Ultra Proline. ECTFE (Halar ) Single Wall Piping System
ECTFE ( ) Single Wall Piping System 222 - Specification Natural Ethylene Chlorotrifluoroethylene (ECTFE) Chemical Piping System REV:IN0512HA Materials: ASTM D3275 Class 2 resin. Raw resins are certified
UNITS 1-3 EAGLE WORKS 2 SPRINGCROFT ROAD TYSELEY BIRMINGHAM B11 3EL
UNITS 1-3 EAGLE WORKS 2 SPRINGCROFT ROAD TYSELEY BIRMINGHAM B11 3EL TEL: 0121 778 6001 FAX: 0121 778 6002 EMAIL: sales@astonfittings.com WEBSITE: www.astonfittings.com QUALITY POLICY The directors of Aston
SECTION VALVES
PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions Specification Sections, apply to this Section. B. Related Sections:
Grey cast iron Fig. 600 Page 2. Forged steel High temperature steel Stainless steel Fig. 600/601 (Y) DN15-25 Page 4 DN40-50 Page 6
Bimetallic steam trap CONA B Bimetallic steam trap Bimetallic steam trap PN16 - with flanges (Fig. 600...1) - union with butt weld ends (Fig. 600...5) Grey cast iron Fig. 600 Page 2 Bimetallic steam trap
HYGIENIC TUBE & PROCESS COMPONENTS ASTM/ANSI
HYGIENIC TUBE & PROCESS COMPONENTS ASTM/ANSI ANSI/ASTM Worldwide, the installation materials for the industrial application according ANSI / ASTM are the most applied. The original American norm ranges
AVK (WWE) BUTTERFLY VALVE DN 50 to DN (EVTLS)
Flangeless tapped lug Wafer Type Design code EN593 Flange connection to EN 1092 PN 6, 10, 16, 25 DESIGN Body Flangeless tapped lug wafer type End Connection EN 1092 PN 6, 10 and 16 ASME B16.5 cl. 150 /
Scope supplies stainless steel, aluminum, steel, and alloy steel, brass, copper, bronze, titanium, nickel alloys, and engineered plastics products.
STAINLESS STEEL Scope Metals Group is a leading distributor and supplier of finished and semi-finished metals products and engineered plastics products to industrial manufacturers. With an extensive inventory
Self-operated Temperature Regulators Type 1u Temperature Regulator
Self-operated Temperature Regulators Type 1u Temperature Regulator ANSI version Application Temperature regulators for cooling installations Control thermostats for set points 1) from 15 to 480 F ( 10
Section 7. Socket Weld and Threaded Fittings. Socket Weld and Threaded Fittings 7-1
Section 7 Socket Weld and Threaded Fittings This Section contains dimension and tolerance information extracted from American and British specifications applicable to socket weld and threaded fittings.
Grey cast iron SG iron Cast steel/ Forged steel High temperature steel Stainless steel Fig. 631 Page 2
CONA S Ball float steam trap Ball float steam trap Ball float steam trap PN16 / PN40 - with flanges (Fig. 631...1) - with screwed sockets (Fig. 631...2) - with socket weld ends (Fig. 631...3) - with butt
B U I L D I N G C O N N E C T I O N S T H AT L A S T
B U I L D I N G C O N N E C T I O N S T H AT L A S T pipe to pipe and people to people. We pride ourselves in providing the finest-quality pipe products and services with integrity and dedication to superior
Forged High Pressure Pipe Fittings
Forged High Pressure Pipe Fittings Forged High Pressure Pipe Fittings Pressure Class Socket Weld Forged Fittings Products Dimension Specifications Pressure Class Threaded Forged Fittings Products Dimension
Cast-Iron Valves G101 DI BUTTERFLY VALVE LEVER... 2 G401 CI GLOBE VALVE CL G403 CI GLOBE VALVE PN G103 DI BUTTERFLY VALVE GEAR...
Cast-Iron Valves PAGE G101 DI BUTTERFLY VALVE LEVER.... 2 PAGE G401 CI GLOBE VALVE CL125.... 9 G103 DI BUTTERFLY VALVE GEAR.... 3 G403 CI GLOBE VALVE PN16.... 10 G201 CI Y STRAINER CL125.... 4 G501 CI
Product Range Shipbuilding
OSNA -10 and OSNA -30 Product Range Shipbuilding KME Germany AG & Co. KG OSNA -10 and OSNA -30 [GB] Member of the KME Group Contents Range of Applications 1 The Material 2 The Elements 3 Pipes 4 Butt Welding
FLANGES PRODUCT: STANDARD FLANGE CLASSIFICATION: PRESSURE CLASS CLASIFICATION:
FLANGES Gestión de Compras manufactures and supplies flanges according to standards ANSI, BS, DIN, JIS and ISO as well as according to customer specifications. PRODUCT: Flanges are a pipe fitting which
IGATEC - Standard - Swivel Joints
IGATEC - Standard - Swivel Joints Type LW Swivel Joints with Welding Connection Swivel Joints with Threaded Connection Swivel Joints for Loading Arms Swivel Joints for Food and Pharmaceuticals IGATEC International
Product data sheet Wouter Witzel - EVFSGD Valves Rubber Lined - Centric EVFS PDS H
DESIGN Body Double Flanged type End Connection EN 1092 PN 6, 10 and 16 ASME B16.5 cl. 150 / B16.47 cl. 150 MSS SP 44 cl. 150 AWWA C207 cl. B, D and E BS 10 table D and E Face to Face EN558-1/2 Series 13
AVK (WWE) BUTTERFLY VALVE DN (3" to 32") 75 (EVML)
AVK (WWE) BUTTERFLY VALVE DN 80 800 (3" to 32") 75 (EVML) Mono flanged type Overall length DN 80300 to ISO 5752 long, basic series 16 (BS 5155 wafer long, DIN 3202K3), Overall length DN 3501000 to ISO
DK-LOK Hydraulic Pipe Fittings
Class 2000, 3000, 6000, 9000 fittings Catalog No. C-2 June 2012 DK-LOK Hydraulic Pipe Fittings are designed and manufactured to the following standards. ASME B 16.11-2005: Forged fittings, Socket-welding
Forged Steel Fittings CLASS 3000 THREADED
Forged Steel Fittings CLASS 3000 THREADED NPS 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4 DN 6 8 10 15 20 25 32 40 50 65 80 100 90 0 ELBOWS A in 0.97* 0.97 1.12 1.31 1.50 1.75 2.00 2.38 2.50 3.25 3.75
Hattersley Newman Hender Ltd
Product Guide Quality Valves from Hattersley WHEN IT REALLY COUNTS, YOU CAN DEPEND ON HATTERSLEY Hattersley Newman Hender is one of the world s premier manufacturers of cast iron, ductile iron and copper
Manufacturer of Industrial Valves a n d R e l e v a n t E q u i p m e n t. Tilting Disk Check Valves with Counter Weight.
Manufacturer of Industrial Valves a n d R e l e v a n t E q u i p m e n t Tilting Disk Check Valves www.mirabvalves.com TiltingDisc Check Valves Size: DN 100 1 mm Pressure: PN 10 40 bar Face to face:
Self-operated Temperature Regulators Type 1u Temperature Regulator
Self-operated Temperature Regulators Type 1u Temperature Regulator Version according to ANSI Application Temperature regulators for cooling plants Control thermostats for set points 1) from 15 to 480 F
PPF PIPE FITTINGS (PAHANG) BUTTWELD FITTINGS
PPF PIPE FITTINGS (PAHANG) BUTTWELD FITTINGS 1 Pahang Pipe Fittings PPF is one of the leading manufacturers of Buttweld fittings and flanges. Our highly specialized product range is capable of catering
Norflow Controls Industrial Valves
MATERIAL OF CONSTRUCTION FOR PRESSURE CONTAINING PARTS FOR TRIM MATERIAL Carbon Steel Forged A-105 13% Cr. Steel A-217 Gr. CA15 Carbon Steel Cast A-216 Gr. WCB, WCC AISI 10 0.15% Moly Steel Cast A-217
Union County Vocational - Technical Schools Scotch Plains, New Jersey
SECTION 220523 - GENERAL-DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Brass ball valves. 2. Iron swing check valves. 3. Iron gate valves. 4. Iron globe valves. B.
ASME 350 BAR SAE 690 BAR
GENERAL HYDRAULIC PIPES 10-40 BAR SAE 50 BAR SAE 3000 PSI SAE 6000 PSI DIN 350-400 BAR SCHEDULE SERIE SAE 3000 PSI 1 SAE 6000 PSI ASME 350 BAR Product Page GS-ASME s 350 bar 203 SAE 690 bar - Grooving
Soft seat. Torque values tables 13 Head losses tables 14 Flange and bolts tables 15 Flanges 16 Tests 16
soft seat PD, KI Series 1 technical data 1 components DN 0-300 2 components DN 30-00 3 KI Series 4 components DN 600-800 4 KA, KX tecnical data technical data KA series 6 components DN 40-300 6 components
COMPANY PROFILE TABLE OF CONTENT. Our products have been supplied to local and foreign customers for the following industries:
UTTERFLY VALVES TALE OF CONTENT COMPANY PROFILE The company ARMATURY Group a.s. is a leading Czech manufacturer and distributor of industrial valves, fittings and control systems for valves. The annual