Ultra Proline. ECTFE (Halar ) Single Wall Piping System

Advanced PE Single Wall Piping System

Advanced PE Single Wall Piping System 8 - Specification Black Polyethylene (Advanced PE) Piping System REV:IN0512PE Materials: Pipe Production: ASTM D3350 cell classification PE445584C. Resin shall comply

Air Handling Piping Systems

Air Handling Piping Systems ProVent - Compressed Air System - PP Vent Duct System www.asahi-america.com Table of Contents Table of Contents Product Specification... Page 350 SOCKET PIPE AND FITTINGS Pipe,

PPN Piping System. Cost Effective Purity

PPN Piping Sytem Cot Effective Purity 45 - Specification PolyPure Natural Polypropylene (PPn) High Purity Piping Sytem REV:HP0512PN Material: ASTM D4101 Group 2, Cla 1 natural polypropylene random copolymer

Pigmented Polypropylene. Piping System

Pigmented Polypropylene Piping Sytem Photo courtey of Agape Water Solution Inc. 75 - Specification PP-Pure Pigmented Polypropylene (PP) High Purity Piping Sytem REV:HP0512PP Material: ASTM D4101 Group

PP-RCT Plumbing and HVAC Piping Systems

PP-RCT Plumbing and HVAC Piping Systems Pipe Fittings Valves 9-2016 Efficient Sustainable Green Technology Asahi/America, in partnership with Bänninger of Germany, introduces - Asahitec PP-RCT piping systems

d z z Le Le Elbow d L mm equiv inch 110 Le r 1) z 5 2 5 5 8 2 1 51/2 210 2 1 6 2 0 7 2 272 8 0 0 5 9 8 291 2 10 375 0 0 11 3 73 78 355 1 5 93 0 511 675 531 0 7 1 0 8 625 6 25 95 653 710 1065 686 1 7 900

-Super Proline Chemical Grade PVDF

EFFECTIVE: 5/26/10 Indutrial Piping Sytem Dimenional Guide #SPDIM Super Proline -Super Proline 3 r z www.aahi-america.com Dimenion ubject to change without notice, conult Aahi/America Engineering Department

MATERIALS. Polypropylene

68509.verB_1_3.P1.fh 4/17/07 12:15 PM Page 1 THERMOPLASTIC INDUSTRIAL PIPING SYSTEMS Asahi/America thermoplastic piping systems are designed for tough industrial applications. With our partner Agru of

COOLSAFE Pre-Insulated PE Piping System

COOLSAFE Pre-Insulated PE Piping System Pipe Fittings Valves Installation COOLSAFE PE piping system provides a cost effective way for installing insulated piping for a broad range of industries. Pipe and

Praher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation.

Praher S4 Ball Valve Lockable Handle Tagging Point Valve Bracket Actuation Materials Body - PVDF Ball Seat - PTFE Seals - FPM Sizes 3/8-4 /16mm - 110mm Features Lockable Handle (Lock not supplied) True

Praher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation.

Praher S4 Ball Valve Lockable Handle Tagging Point Valve Bracket Actuation Materials Body - PVDF Ball Seat - PTFE Seals - FPM Sizes 3/8" - 4"/16mm - 110mm Features Lockable Handle (Lock not supplied) True

485 - NC NO/DA DN

485 - NC 285 - NO/DA DN 25-100 The 485/285 diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic

PNEUMATICALLY ACTUATED 2-WAY

482 DN 25-65 The 482 diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic efficiency by increasing

Factory address: Mola sadra st., Abooreyhan st Eshtehard Industrial Town, TEHRAN/ IRAN

z d Le mm equiv inch Le r 1) z z Le L 110 5 2 5 5 8 2 Elbow d 1 51/2 210 2 1 6 2 0 7 2 272 8 0 0 5 9 8 291 2 10 375 0 0 11 3 73 78 355 1 5 93 0 511 675 531 0 7 1 0 8 625 6 25 95 653 710 1065 686 1 7 900

GRP backing flanges DIN 2501 Flange connecting dimension PN10 WORK STANDARD. GRP backing flanges made of Polyester resin.

GRP backing flanges DIN 2501 Flange connecting dimension PN10 1310-WN-en 06 10.2002 GRP backing flanges made of Polyester resin. D 45 e d2 d1 b1 k Flange connecting dimensions according to DIN 2501 Part

i butt weld spigot i flanged end acc. to DIN PN 10 / 16

body material PVC-U PVC-C PP PVDF ball seat PTFE other seats iepdm ifpm i *) working temperature 0 C to 50 C 0 C to 90 C -20 C to 80 C nominal size DN to DN connection with pipe legth acc. to EN 558-1

600, 630. Diaphragm Valve, Plastic

Diaphragm Valve, Plastic Construction The /630 pneumatically operated 2/2-way valves have a low maintenance piston actuator which can be controlled by inert gaseous media. They have an integral optical

CATALOG. Actuated Diaphragm Valve DN PVC-U / PVC-C / PP-H / PVDF / ABS SMART IN FLOW CONTROL.

CATALOG Actuated Diaphragm Valve DN 15-100 PVC-U / PVC-C / PP-H / PVDF / ABS SMART IN FLOW CONTROL. TABLE OF CONTENTS Type 186 - DN 12-15 (MA 10) 04 General information - Technical specification 04 Sectional

R690. Diaphragm Valve, Plastic

Diaphragm Valve, Plastic Construction The GEMÜ diaphragm valve has a low maintenance membrane actuator which can be controlled by air or inert gases. Normally Closed (NC), Normally Open (NO) and Double

DIN /DIN Aseptic Flange Union for DIN 11866/11850 Tube

/ Aseptic Flange Union for DIN 11866/11850 Tube / Aseptic Flange Union This range of aseptic fittings has been developed by the German hygienic industry to meet the exacting needs of the food, chemical

Diaphragm valve MV 309

Diaphragm valve MV 309 Nominal size DN 15 32 Nominal size 1/2 1 1/4 Pressure PN 6 bar Features pneumatic diaphragm valve DN 15 32 compact piston drive for medium pressure up to 6 bar (PTFE diaphragms)

N086, N186, N786. Pressure retaining valve, Plastic

Pressure retaining valve, Plastic Construction The GEMÜ N086, N186 and N786 pressure retaining valves are used to provide a constant back pressure in process plant. If the inlet pressure rises above a

R o L. BALL VALVE of stainless steel with welded / threaded / flanges ends 440, 442, 443, 445 series SILVER LINE. Description. Edition

with welded / threaded / flanges ends C ont R o L Description Ball valve 440-445 series used for on/off services a wide range of applications in the chemical and process industries. It is used for oil,

Flowmeter DFM

Flowmeter DFM 165 50 Nominal size DN 10-65 Nominal size /8 2 1/2 Nominal pressure PN 10 bar Features Measuring range to 50,000 l/h suitable for a wide range of applications for gaseous medium types, water,

Mur-lok. Mur-lok Polypropylene Quick-Connect Fittings & Valves. Check Valves. Fixed NPTF 90 Elbows. Check Valve Elbow. Swivel NPTF 90 Elbows

Polypropylene Quick-Connect Fittings & Valves Polypropylene Quick-Connect Fittings & Valves G.A. Murdock offers the largest selection of polypropylene quick-connect fittings and valves on the market. These

DK/CP DN PVC-U / PVC-C / PP-H / PVDF. Pneumatically actuated 2-way diaphragm valve

PVC-U / PVC-C / PP-H / PVDF Pneumatically actuated 2-way diaphragm valve DK/CP DN 15 32 The new DK/CP diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids.

Diaphragm Valve MV pneumatic - with pneumatically directly controlled actuator

Diaphragm Valve MV 0 - pneumatic - with pneumatically directly controlled actuator Advantage good control characteristics DN 5 - DN 50 equipped as standard with visual position indicator and manual emergency

PRICE LIST WEFATHERM. 1 November PP-R Piping System WEFATHERM PIPE LEADERS IN PIPELINE TECHNOLOGY. Asmuss Plastic Systems Limited

143 PRICE LIST 1 November 2016 The Wefatherm PP-R System is ideally suited for use in a wide range of applications including hot and cold water systems, industrial heating and cooling, air-conditioning

CEPEX PLASTIC VALVES EXTREME SERIES

CEPEX PLASTIC VALVES EXTREME SERIES Technical Product Presentation Cepex presentation Cepexis one of the leading European (Spanish) manufacturers of plastic valves and fittings. For more than 30 years

High Purity PVDF/PP Valves and Flowmeters

High Purity PVDF/PP Valves and Flowmeters Product overview and technical data VALVES, MEASUREMENT AND CONTROL SYSTEMS Quality is important for us Your reliable partner Since 1988, GEMÜ has been an Industry

Diaphragm Valve, Plastic

Diaphragm Valve, Plastic Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance plastic piston actuator which can be controlled by inert gaseous media. Normally Closed,

2 way ball valve S4 with integrated Praher Labeling System

Praher Plastics Austria GmbH DB/EN/DEEN///33 Technische Änderungen vorbehalten! way ball valve S4 Symbol photo Safety locking handle system This document does not constitute a guarantee, it is for initial

+91-8048078009 Kanti Enterprises http://www.kantienterprises.in/ We are amongst the leading Manufacturers, Exporters and Suppliers of this impeccable range of Products like Pipes & Tubes, Flanges, Pipe

NSF/ANSI 61 Drinking Water System Components Health Effects

The Public Health and Safety Organization NSF Product and Service Listings These NSF Official Listings are current as of Thursday, January 08, 2015 at 12:15 a.m. Eastern Time. Please contact NSF International

ABS Pipe metric system Plain PN10

S Pipe metric system Plain PN10 t (mean) Da (min) Size Thickness Weight Length ode t Da mm kg/m m 16 1.5 0.07 3 11 565 305 20 1.6 0.10 3 11 565 306 25 1.9 0.14 3 11 565 307 35 2.1 0.21 3 11 565 308 16

Angle Seat Globe Valve, Metal

Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated /-way valve has a robust low maintenance aluminium actuator. The valve spindle is sealed by a self-adjusting gland packing providing

Diaphragm Valve, Plastic

Diaphragm Valve, Plastic Construction The GEMÜ pneumatically operated 2/2-way valve has a low maintenance piston actuator which can be controlled by inert gaseous media. It has an integral optical position

HDPE PIPE SYSTEMS PRODUCT CATALOGUE.

HDPE PIPE SYSTEMS PRODUCT CATALOGUE www.acu-tech.com.au This is to certify that: The Trustee for The Morren Family Trust ABN 52 394 633 042 Trading As Acu-Tech Piping Systems 119 Kelvin Road Maddington

3 way ball valve S4 hand operated

General: Symbolfoto Material: PVC-U / PP / PVDF Sealing material: EPDM / FPM Ball seating joint: PTFE Ball: T- oder L-Bohrung Dimensions: DN0 (DN5 / d6 / d/8 ) DN5 d0 d/ DN0 (DN5 / d5 / d/4 ) DN5 d d DN

DIN Hygienic Union & Fittings

DIN 11851 Hygienic Union & 11852 Fittings The DIN 11851 union is widely used throughout Europe and the Middle East and incorporates a round slotted nut and D Section seal, as standard. The union is manufactured

NEW ADVANTAGE 29 SERIES - FULL BORE SDR11/PN16 MITRE BENDS

13 NEW PRICE LIST 1 October 2018 HDPE Long Spigot Fabricated Fittings Advantage 29 Series Mitred Bends Plastic Systems have been supplying bespoke fabricated fittings for major projects for many years.

Ball valve C 100 multi-part, high k v value, high stability

Ball valve C 00 multipart, high k v value, high stability Advantage optimised kv value for all s, the internal ball diameter is constructively adapted to the internal pipe diameter exchangeable and ball

R677. Diaphragm Valve, Plastic

Diaphragm Valve, Plastic Construction All medium wetted parts, the bonnet and handwheel of the GEMÜ 2/2-way diaphragm valve are made of plastic. The low maintenance plastic bonnet has an ergonomically

Angle Seat Globe Valve, Metal

Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated /-way valve has a plastic pneumatic piston actuator. The valve spindle is sealed by a self-adjusting gland packing or a compact

Electric Actuated 3-Way Ball Valves L-Port, PVC Body, Teflon/EPDM Seals 1/2 to 2 inch Pipe

Electric Actuated 3-Way Ball Valves L-Port, PVC Body, Teflon/EPDM Seals 1/2 to 2 inch Pipe SERIES Features Industrial grade PVC ball valve with PTFE/EPDM seals IP67 weatherproof polyamide enclosure with

Ball Valve C 200. Stem PVC-U PVDF PP, fiberglass-reinforced. Ball PVC-U PP PVDF. Ball Seat PTFE. Application chemical and industrial plants

Ball Valve C 00 Benefits Highend industrial valve Flexible toolbox with a broad range of product varieties Reliable material combination for safe handling of critical media Newly designed ergonomic handle

h Technical Product Data FW Pressure Pipe Systems

h Technical Product Data FW Pressure Pipe Systems E Engineering GmbH All rights reserved. Publication: 10/2012 All rights reserved. No part of this document may be reproduced or utilized in any form or

Precision is Central.

Precision is Central. As experts in pipe joining solutions, we know precision is vital to every fitting and how they are fused. We offer the most complete range of conventional fusion fittings, injection

Air Actuated 3-Way Ball Valves T-Port, Lead Free Brass, Full Port 1/4 to 2 NPT

Air Actuated 3-Way Ball Valves T-Port, Lead Free Brass, Full Port 1/4 to 2 NPT SERIES Features Full Port Lead Free Brass Diverter Valve Spring return or double acting actuators Ball Valve direct mounted

Technical Data. Flow Meter Schwertberg, Poneggenstr. 5 Austria/Europe Fax +43/7262/ Tel.

Technical Data. Flow Meter. Tel. +43/7262/61179-0 4311 Schwertberg, Poneggenstr. 5 Austria/Europe info@praher-valves.com Fax +43/7262/61203 Float-type flow meter Float-type flow meter DN Inches da Measuring

Ball Valves in investment cast stainless 2-way

Ball Valves in investment cast stainless 2-way way, 3-piece construction Can be combined with 1000 / 800 PSI WOG Thread, socket and butt weld ends Full Port to Schedule 40 pipe Semi lugged body Blow-out

C 200 Modern Construction. Flexible Modular Design. Highest Safety.

Ball Valve Modern Construction. Flexible Modular Design. Highest Safety. The System At A Glance Ergonomic hand lever Position locking Safety Guard Double shaft seal with hand lever Intelligent interface

Ball & Socket Fittings (Bauer Style)

Page 96 Ball & Socket Fittings (Bauer Style) Elbow-Bauer Style 3-1/ * *1 MM 76 89 108 133 159 194 2 300 * Locking Bar (part # 9-7318) for & 1 Lever is Sold Separately 6-9038 6-9039 6-9040 6-9041 6-9042

2/2 Pressure operated valves

Operation Series Page no. Function 2/2 3/2 Body material Stainless steel Brass Solenoids IP Protection class IP65 (with connector) Explosion proof class Zones 1, 21 II 2 GD EEx m IP67 II 2 G EEx me IP54

Diaphragm valve, Plastic

Diaphragm valve, Plastic Construction The GEMÜ manually operated 2/2-way diaphragm valve has a low maintenance plastic bonnet. An optical position indicator is integrated as standard. Features Suitable

Mechanical MATERIAL SPECIFICATIONS. Stainless Steel Housing Specifications. Gasket Specifications. Bolt / Nut Specifications

82 COUPLINGS SYSTEM The Grinnell Stainless Steel System is designed for joining 2" to 12" (54,0mm to 206,4mm) stainless steel piping, schedules 5, 10, and 40. The Figure 472 coupling patented Universal

Diaphragm Valve, Plastic 2/2 way, motorized

Diaphragm Valve, Plastic / way, motorized Construction Maintenancefree electric actuator Maintenancefree toothed belt drive Reversible synchronous motor Manual override Optical position indicator Features

Wafer Check Valve Type 012 PVC-U

novel valve design with conical sealing surface for highest requirements and long service life body disc reinforced EPDM / FPM gaskets DN40 / d50 / 1½'' DN200 / d225 / 8'' operating pressure max. 10 bar

3-Way Lead Free Brass Ball Valves Full Port, L or T Flow Path, 400 PSI CWP 1/4 to 2 NPT

3-Way Lead Free Brass Ball Valves Full Port, L or T Flow Path, 400 PSI CWP 1/4 to 2 NPT SERIES Features FULL PORT 3-way L or T flow path Functions as a diverter, selector or mixing valve Four ball seat

IGATEC - Standard - Swivel Joints

IGATEC - Standard - Swivel Joints Type LW Swivel Joints with Welding Connection Swivel Joints with Threaded Connection Swivel Joints for Loading Arms Swivel Joints for Food and Pharmaceuticals IGATEC International

Type 543. Three-way Ball Valve

Three-way Ball Valve Type 543 General Size: ⅜ 2 Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seat: PTFE Seals: EPDM or FPM End Connection: Solvent cement socket, threaded, flanged,

Plain Ended Welding Fittings BS 4825 Part 2

Plain Ended Welding Fittings BS 4825 Part 2 Alchem offer a wide range of plain ended weld fittings to suit both hygienic and pharmaceutical applications. These include bends, tees, and reducers, both concentric

Air Actuated Ball Valves 2-Way, Lead Free Brass, Full Port 1/4 to 3 NPT

Air Actuated Ball Valves 2-Way, Lead Free Brass, Full Port 1/4 to 3 NPT SERIES Features Spring Return or Double Acting Actuators Lead Free Brass Ball Valve with ISO5211 direct mounting Full port design

Pressure relief valve DHV 718

Pressure relief valve DHV 78 Benefits diaphragm controlled pressure relief valve with piston guidance simple design, reliable function particularly suitable for oscillating pumps constant, frictionless

Type 21 True Union Ball Valves

PDF Published June 27, 218 Type 21 True Union Ball Valves The Chemline Type 21 True Union Ball valve incorporates state of the art features for long term performance. This is a full port, full blocking

Type 21 Ball Valves. features PTFE

PDF Published August 22, 217 Type 21 Ball Valves The Chemline Type 21 True Union Ball valve incorporates state of the art features for long term performance. This is a full port, full blocking True Union

SDR-26 (160 PSI) SDR-21 (200 PSI) SDR-17 (250 PSI) MINIMUM WALL (IN.) 20 LENGTH. 1.5" 1.900" N/A N/A N/A.090" ".419 lbs..415 lbs.

u ASTM D2241 PRESSURE PIPE Gasketed Pipe Specifications Northern Pipe Products ASTM D2241 IPS Pressure Rated Pipe is manufactured from compounds conforming to cell class 12454 in accordance with ASTM D1784.

Compact Electric Actuated Ball Valves PVC Body, Teflon/EPDM Seals 1/2 to 1 inch Pipe

Compact Electric Actuated Ball Valves PVC Body, Teflon/EPDM Seals 1/2 to 1 inch Pipe SERIES Features Industrial quality miniature actuator Industrial grade True Union ball valve Visual valve position indicator

Bondstrand 2000M/7000M Glassfiber Reinforced Epoxy (GRE) pipe systems for marine service

Quick-Lock Taper/Taper 1-16 inch Bondstrand 2000M/7000M Glassfiber Reinforced Epoxy (GRE) pipe systems for marine service with external pressure requirements 18-40 inch Uses and applications Ballast Portable

Diaphragm Valve, Plastic

Diaphragm Valve, Plastic Construction The pneumatically operated 2/2 way diaphragm valve GEMÜ is a corrosionresistant all plastic construction. It has a maintenancefree piston actuator which can be controlled

DKD/CP DN PVC-U. Direct action pneumatically actuated 2-way diaphragm valve

DKD/CP DN 15 65 PVC-U Direct action pneumatically actuated 2-way diaphragm valve DKD/CP DN 15 65 The DKD/CP diaphragm valve is particularly suitable for shutting off very dirty and/or highly viscous fluids.

Fitting Guide. Chemtrol Thermoplastic Flow Solutions. Chemtrol is a brand of

Fitting Guide Thermoplastic Flow Solutions is a brand of Contents Introduction 2 Introduction to Fittings 2 Materials 2 Fitting Terms and Abbreviations 3 Dimensions and Standards 3 Product Guide 4 PVC

Pressure Pipes & Fittings

Pressure Pipes & Fittings Description: UPVC and CPVC pipes for hot and cold water supply under pressure. Range: Metric series fromø16 up toø315 mm, Imperial series fromø1/2" up toø1". Pressure Rating:

Praher S4 Ball Valve. manual valves. Praher Type S4 Ball Valve. Materials. Size. Pressure Rating. Features. Connections.

Praher S4 Ball Valve Praher Type S4 Ball Valve Descripti: In-line double uni ball valve with lockable handle Mounting: In any positi Maximum Fluid Pressure at 20 C: s 16mm to 7mm - 10bar; s 90mm to 110mm

HP 16 Epoxy Fittings (Filament wound with reinforced epoxy inner liner - Compatible with Red Thread and Green Thread HP 16 piping systems)

HP 16 Epoxy Fittings (Filament wound with reinforced epoxy inner liner - Compatible with Red Thread and Green Thread HP 16 piping systems) CHEMICAL INDUSTRIAL Fiber Glass Systems provides a broad range

Stainless Steel Pipe System. System No. Submitted By Spec Sect Para Location Date Approved Date TEMPERATURE ( F/ C)

The Victaulic Vic-Press 304 System for joining approved Type 304/304L stainless steel pipe provides a fast, easy, clean, reliable means for joining 1/2"/15, 3/4"/20, 1"/25, 1 1/2"/40, and 2"/50 stainless

Diaphragm Valve, Metal

Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance actuator. Normally Closed, Normally Open and Double Acting control functions are available.

Diaphragm Valve, Metal

Diaphragm Valve, Metal Construction The GEMÜ piston actuated 2/2-way diaphragm valve is designed for use in sterile areas of application. All metallic actuator components are made of stainless steel. The

Low Pressure Series KL

Low Pressure 35 Nom. Type Material Max. static working C v value Cross Page bore pressure at 20 C both sides one side both sides one side section [bar] [psi] self sealing self sealing [mm 2 ] 6 KL-006

flowconme Types of Fittings Available Wall Thickness Sch 5 - Sch 160 (Sch 5s - Sch 160s) Others available upon special request

FITTINGS Overview Types of Fittings Available 45, 9 Elbows, 18 Returns (Short & Long Radius) Tees & Crosses (equal & reducing), Reducers (concentric & eccentric), Caps, Stud Ends, Weldolets, Outlets, Laterals

Modular valve block MVB 100/200

Modular valve block MVB 100/200 Nominal size DN 15 Nominal size 1/2 Nominal pressure PN 6 bar www.asv-stuebbe.com/produkte/armaturen Characteristics MVB 100 Ideal for realising dosing and distribution

LATEST ARRIVALS CATALOGUE STOCK

LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL

Pipe Nipples / Solvent Cement / Pipe Clips 11. Diaphragm Valves / Knife Gate Valves 21

TABLE OF CONTENTS Pipe Sizing 1 Pipe 2 Tee s 3 Elbows 4 Couplings 5 Adaptors, Caps & Plugs 6 Unions 7 Reducer Bushing 8 Wye s / Clamp on Saddles 9 Flanges 10 Pipe Nipples / Solvent Cement / Pipe Clips

Materials : Carbon steel or stainless steel

Size : Ends : Max Temperature : DN 15 to 600 mm Flanges PN10/16/25/40 + 150 C for flange gaskets, 200 C for flanges Max Pressure : 40 Bars for flanges PN40 Specifications : Welding flanges Flat flanges

Two-Way Metal Seated Ball Valve Type 75-M

Two-Way Metal Seated Ball Valve Type 75-M Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Fire Safe design optional Design Standards EN 12516, EN 1983, ISO

Bondstrand 2000M/7000M for marine 1 to 6 inch (Quick-lock joint), 8 to 40 inch (Taper/Taper joint) with external pressure requirements

Bondstrand 2000M/7000M for marine 1 to 6 inch (Quick-lock joint), 8 to 40 inch (Taper/Taper joint) with external pressure requirements Uses and applications Ballast Portable discharge line Chlorination

Series 46 Self-operated Regulators Differential Pressure and Flow Limiters Type 46-5 Type 46-6

Series 46 Self-operated Regulators Differential Pressure and Flow imiters Type 46-5 Type 46-6 Application Differential pressure and flow limitation for district heating systems with indirect connection,

COMPRESSION TUBE FITTINGS PRODUCT CATALOG UNIQUE FITTINGS MOLDED FROM FOUR CORROSION-RESISTANT THERMORESINS

COMPRESSION TUBE FITTINGS PRODUCT CATALOG UNIQUE FITTINGS MOLDED FROM FOUR CORROSION-RESISTANT THERMORESINS Plastic Fittings That Revolutionized The Techniques of Connecting Tubes. understands the needs

PF6 Stainless Steel Piston Actuated On/Off Valves

Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

PYPLOK System It s the weldless, threadless way to join pipe/tube

The Tube-Mac PYPLOK System It s the weldless, threadless way to join pipe/tube Leakfree performance, reduced installed cost and minimised downtime The Tube-Mac PYPLOK connecting system is sparkless and

SilverLine S647, S660, S670. Diaphragm Valves, Plastic/Metal

Diaphragm Valves, Plastic/Metal Construction GEMÜ SilverLine is a range of simple yet robust plastic and metal diaphragm valves for the control of liquids and gases. Valve bodies are available in PVC-U,

Diaphragm Valve, Metal

Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. Normally Closed, Normally

2/2- and 3/2-way Ball Valve with pneumatic rotary actuator, plastic body, DN 10-50

/- and 3/-way Ball Valve with pneumatic rotary actuator, plastic body, DN -50 Radially expandable body Pneumatic actuator in compact model Optical position indicator Control valve acc. to NAMUR Type 5

710, 717, 723. Ball Valve, Plastic

Ball Valve, Plastic Aufbau GEMÜ 710, 717 and 72 are 2/2 or /2-way plastic ball valves available in the sizes 1/2 to 2 (DN 8 to DN 50, GEMÜ 717 to DN 100). GEMÜ 710 has a corrosion resistant low maintenance

DV-5a Automatic Water Control Valve Single Interlock Preaction Fire Protection Systems 1-1/2 Inch to 8 Inch (DN40 to DN200) General Description

Worldwide Contacts www.tyco-fire.com DV-5a Automatic Water Control Valve Single Interlock Preaction Fire Protection Systems 1-1/ Inch to Inch (DN40 to DN00) General Description The TYCO DV-5a Automatic

Pressure relief valve DHV 712-R set range: 0,3-10,0 bar

Pressure relief valve DHV 7R set range: 0,3 0,0 bar Benefits pressure setting possible at any time, also during operation optimum monitoring valves high reproducibility of the set pressure high level of

Two-Way Soft Seated Ball Valve Type 75-S

Two-Way Soft Seated Ball Valve Type 75-S Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Design Standards EN 12516, EN 1983, ISO 5211, AD-2000 ASME B16.34,

Oilfield Service and Distribution Products

Oilfield Hammer Unions Hammer Seal Swivel Joints Industrial Unions Non-Freeze Tank Valves Seal-O-Grip Oilfield Service and Distribution Products Issue Date 10/01/2009 www.kempervalve.com Sales: 800-231-2724

Bondstrand 2425 Glassfiber Reinforced Epoxy (GRE) pipe systems for Marine and Offshore services for 25 bar pressure

Bondstrand 2425 Glassfiber Reinforced Epoxy (GRE) pipe systems for Marine and Offshore services for 25 bar pressure Uses and applications Ballast water Drilling muds Saltwater/seawater Cassions Fresh water

Pressure control valve Type KDC

Data sheet Pressure control valve Type KDC 65-00 The KDC valve is a pressure control valve. The valve controls the discharge pressure of the compressor to ensure fast build-up of pressure and lubrication