RAIMONDI. High pressure forged check valves recommended to prevent flow reversal in severe applications.
|
|
- Randolph Bruce
- 5 years ago
- Views:
Transcription
1 Fig RAIMONDI High pressure forged check valves recommended to prevent flow reversal in severe applications. Features High quality forged materials to guarantee pressure envelope integrity, all in conformity with ASME and DIN standards. Designed to comply with ASME B16.34, API 600, ISO, DIN, TRD, VGB, TRB, PED. CE mark 100% Compliance with European Pressure Equipment Directive n 97/23/EC. Advanced pressure seal design and pure graphite gasket rings to ensure high tightness and to comply with the Health, Safety and Environment requirements for fugitive emissions control. Supplied as swing check and tilting disc configurations. Slam-free operation offered by tilting disc configuration. Special constructions/materials, bolted bonnet configuration, screw down check valve configuration - all available upon request. General application Specifically thought to satisfy the requirements of the power industry, the Raimondi high pressure forged check valves are also indicated for use in any high temperature application (i.e. chemical, petrochemical, offshore plants). Technical data Pressure ratings : ASME: from 900# to 4500# DIN: from PN 160 to PN 720 Body materials : forged carbon steels, alloys steels and stainless steels. All in compliance with ASME and DIN standards Temperature ( C) : -46 to Sizes (mm) : (2-30 ) Connections standards Flanges : ASME B16.5. Buttweld : ASME B16.25, DIN 2448 Other connections on request. Pentair reserves the right to change the contents without notice RAILT-0007-EN-1306
2 Pressure temperature ratings to ASME Test pressure to API 598 and ASME B16.34 (bar) Temp. Hydrostatic shell test Hydrostatic seat test Pneumatic test >5,6 A105 / LF2 F11, F12 F22 F91 F316 A105 / LF2 F11, F12 F22 F91 F316 (LCB) (WC6) (WC9) (CF8M) (LCB) (WC6) (WC9) (CF8M) C CrMo44 10CrMo910 X10CrMoVNb91 X6CrNiNb1810 C CrMo44 10CrMo910 X10CrMoVNb91 X6CrNiNb STANDARD CLASS Working pressure (bar) C ASME 900 SPECIAL CLASS ,2 155,1 155,1 155,03 148,9 155,2 155,2 155,2 155,03 155, ,2 153,4 153,6 155,03 144,4 155,2 155,2 155,2 155,03 152, ,1 146,3 147,1 155,03 126,6 155,2 155,2 155,2 155,03 139, ,7 139,1 139,9 150,55 115,5 155,2 155,2 155,2 155,03 125, ,5 136,4 134,5 145, ,2 155,2 155,2 155,03 118, ,2 133,4 132,7 137,46 100,2 155,2 155, ,03 111, ,2 127,3 127,3 125,05 94,9 149,6 155,2 152,5 155,03 105, ,9 120,7 120,7 121,61 91,3 144,4 147,5 152,3 151,58 101, ,5 109,8 109,8 109,9 87,3 129,4 137,2 150,7 150,55 97, ,3 105,3 105,3 105, ,8 131,6 149,1 148, ,1 101,4 101,4 100,59 84,2 75,1 126,8 141,5 139, ,4 83,4 83,4 93,02 80, ,2 107,1 124,02 89, ,5 60,8 65,8 79,92 78,9 19, ,2 97,49 88, ,3 49,1 75,1 74,9 47,9 61,4 86,81 88, ,6 22,9 62,35 64,3 22,1 28,6 77,86 80, ,63 42,4 37,21 53 Test pressure to API 598 and ASME B16.34 (bar) Hydrostatic shell test Hydrostatic seat test Pneumatic test >5, ,3 258,6 258,6 258,37 248,1 258,6 258,6 258,6 258,37 258, ,4 255, ,37 240,6 258,6 258,6 258,6 258,37 251, ,9 243,8 245,2 250, ,6 258,6 258,6 258,37 224, ,1 231,9 233,2 243,22 192,5 258,6 258,6 258,6 258, ,1 227,4 224,2 229,09 178,4 258,6 258,6 258,6 258,37 182, ,6 222,3 221,1 208,42 166,9 258,6 258, ,37 170, ,7 212,1 212,1 202,57 158,1 249,3 258,6 254,2 258, ,8 201,2 201,2 195,68 152,1 240,6 245,8 253,8 252,52 156, ,5 182,9 182,9 183,27 145,6 215,6 228,7 251,1 251,14 153, ,8 175,5 175,5 175,01 143,3 179,7 219,3 248,3 248,04 150, , ,77 140,4 125,2 211,3 235,9 233,23 149, ,68 134, ,7 178,5 206,7 144, ,9 101,3 109,6 132,98 131,5 32,4 126, , ,8 81,8 125,40 124,8 79,8 102,3 145,03 136, ,4 38,2 104,04 107,2 36,8 47,7 129,88 104, ,61 70,6 62,01 65,7 Test pressure to API 598 and ASME B16.34 (bar) ASME 1500 Hydrostatic shell test Hydrostatic seat test Pneumatic test >5,6 ASME , ,62 413, ,62 430, ,3 426,2 426,7 430, ,62 422, ,5 406,4 408,7 418,22 351, ,62 386, ,9 386,4 388,6 405,13 320, ,62 349, , ,7 381,71 297, ,62 330, ,7 370,6 368,5 347,26 278, ,62 309, ,8 353,5 353,5 337,95 263,6 415, ,6 430,62 293, ,3 335,3 325,90 253,8 401,1 409,7 423,1 420,98 282, ,5 304,9 304,9 305,23 242,6 359,4 381,5 418,5 418,22 270, ,6 292,5 292,5 291,45 238,9 299,6 365,6 414,1 413,4 266, ,9 281,7 281,7 279, ,7 352,1 393,1 388,94 261, ,3 231,6 231,6 258,03 223,6 91,6 289,6 297,5 344,5 249, ,2 168,9 182,7 221,86 219,1 53,9 211,1 228,4 270,78 224, ,4 136,4 208, ,4 241,49 224, ,6 173,28 178,6 61,3 79,5 216,69 223, ,68 117,1 103,35 197,1 Pentair reserves the right to change the contents without notice page 2
3 Pressure temperature for ISO materials Pressure rating TT Mo3 13CrMo44 15NiCuMoNb5 10CrMo910 X10CrMoVNb91 X6CrNiNb1810 (GS-C25) (GS 22Mo4) (GS 17CrMo55) (GS18CrMo910) LF2 A105 F1 F11, F12 F22 F91 F316 (LCB) (WCB) (WC6) (WC9) (CF8M) Temp. Working pressure (bar) C Pressure rating 09 (PN 160) Pressure rating 15 (PN 250) Pressure rating 25 (PN 500) Pentair reserves the right to change the contents without notice page 3
4 Materials to ASTM and ISO Materials to ASME Chemical Requirements Mechanical Properties ASTM Composition % R S min A min C min Standard C Mn P S Si Cr Mo Ni Mpa Mpa % % Forged Body A 105N 0,25 0,6-1,05 max 0,04 max 0,04 max 0, min A 182 F1 max 0,25 0,6-0,9 max 0,045 max 0,045 max 0, ,44-0, min A 182 F11 (F12) 0,1-0,2 0,3-0,8 max 0,04 max 0,04 0,15-0,6 0,8-1,25 0,44-0, min A 182 F22 0,05-0,15 0,3-0,6 max 0,04 max 0,04 max 0,5 2,0-2,5 0,87-1, min A 182 F5 max 0,15 0,3-0,6 max 0,03 max 0,03 max 0,5 4,0-6,0 0,44-0,65 max 0,5 485 min A 182 F9 max 0,15 0,3-0,6 max 0,03 max 0,03 0,5-1,0 8,0-10,0 0,9-1,1-585 min A 182 F91 0,08-0,12 0,3-0,6 max 0,02 max 0,01 0,2-0,5 8,0-9,5 0,85-1,05 max 0,4 585 min A 182 F304 max 0,08 max 2,0 max 0,04 max 0,03 max 1,0 18,0-20,0-8,0-11,0 515 min A 182 F316 max 0,08 max 2,0 max 0,04 max 0,03 max 1,0 16,0-18,0 2,0-3,0 10,0-14,0 515 min A 182 F321 max 0,08 max 2,0 max 0,03 max 0,03 max 1,0 min 17,0 Ti 0,1-0,18 9,0-12,0 515 min A 350 LF2 0,35 max 1,35 max 0,035 max 0,04 0,15-0,3 max 0,3 max 0,12 max 0,9 485 min Cast Body A 216 WCB max 0,3 max 1,0 max 0,04 max 0,045 max 0, A 352 LCB max 0,3 max 1,0 max 0,04 max 0,045 max 0, A 217 WC6 max 0,2 0,5-0,8 max 0,04 max 0,045 max 0,6 1,0-1,5 0,45-0, A 217 WC9 max 0,18 0,4-0,7 max 0,04 max 0,045 max 0,6 2,0-2,75 0,9-1, A 217 C5 max 0,2 0,4-0,7 max 0,04 max 0,045 max 0,75 4,0-6,5 0,45-0, A 217 C12 max 0,2 0,35-0,65 max 0,04 max 0,045 max 1,0 8,0-10,0 0,9-1, A 217 CA15 max 0,15 max 1,0 max 0,04 max 0,04 max 1,5 11,5-14,0 max 0,5 max 1, A 351 CF3M max 0,03 max 1,5 max 0,04 max 0,04 max 1,5 17,0-21,0 2,0-3,0 9,0-13,0 485 min A 351 CF8M max 0,08 max 1,5 max 0,04 max 0,04 max 1,5 18,0-21,0 2,0-3,0 9,0-12,0 485 min Bolts and Nuts A 193 B7 0,37-0,49 0,65-1,1 max 0,035 max 0,04 0,15--0,35 0,75-1,2 0,15-0, A 193 B16 0,36-0,47 0,45-0,7 max 0,035 max 0,04 0,15--0,35 0,8-1,15 0,5-0,65 V 0,25-0, A 193 B8 max 0,08 max 2,0 max 0,045 max 0,03 max 1,0 18,0-20,0-8,0-10,5 205 A 320 L7 0,38-0,48 0,75-1,0 max 0,035 max 0,04 0,15--0,35 0,8-1,1 0,15-0,25 - A 307 B - - max 0,04 max 0, A 194 2H min 0,4 max 1,0 max 0,04 max 0,05 max 0, A ,4-0,5 0,7-0,9 max 0,035 max 0,04 0,15-0,35-0,2-0,3 - A max 0,08 max 2,0 max 0,045 max 0,03 max 1,0 18,0-20,0-8,0-10,5 Materials to ISO Chemical Requirements Mechanical Properties Composition % S A C DIN R min min min No. Type C Mn P S Si Cr Mo Nb Ni Mpa Mpa % % Forged Body C22.8 max 0,25 0,3-0,6 0,045 0,045 0,15-0, Mo3 0,12-0,2 0,5-0,7 0,04 0,04 0,15-0,35-0,25-0, CrMo44 0,1-0,18 0,4-0,7 0,04 0,04 0,15-0,35 0,7-1,0 0,4-0,5 - - min CrMo910 max 0,15 max 0,5 0,04 0,04 max 0,5 2,3 1,0 - - Cu min NiCuMoNb5 max 0,17 0,8-1,2 0,035 0,035 max 0,5 max 0,3 max 0,4 max 0,8 1,0-1,3 max0, X10CrMoVNb91 max 0,15 0,3-0,6 0,03 0,03 0,5-1,0 8,0-10,0 0,9-1,1 max 0,5 - Ti X10CrNiTi189 max 0,1 max 2,0 0,045 0,03 max 1, ,0-11,5 >5xC min X10CrNiMo189 max 0,1 max 2,0 0,045 0,03 max 1,0 17,0-19,0 1,9-1,0-9,0-11,5 >5xC min X10CrNiMoTi18.10 max 0,1 max 2,0 0,045 0,03 max 1,0 16,5-18,5 2,0-2,5-10,5-13,5 >5xC min TT5 0, ,9-0,7 0,045 0,045 max 0, Cast Body GS-C25 0,18-0,23 0,5-0,8 0,05 0,05 0,3-0,5 max 0, GS-22Mo4 0,18-0,23 0,5-0,8 0,04 0,04 0,3-0,5 max 0, GS-17CrMo55 0,15-0,2 0,6-0,8 0,04 0,04 0,3-0,5 1,0-1, GS-18CrMo910 0,12 0,6 0,04 0,04 0,4 2, GX7CrNiMo189 max 0,08 max 1,5 0,045 0,03 max 1,5 17,5-20, ,0-10,0 - min Bolts and Nuts CK35 0,32-0,4 0,4-0,7 0,035 0,035 0,15-0,35 max 0, CrMo55 0,20-0,29 0,5-0,8 0,035 0,035 0,15-0,35 0,9-1,2 0,2-0,3 - max 0, CrMoV55 0,20-0,29 0,3-0,6 0,035 0,035 0,15-0,35 1,2-1,5 0,5-0,6 - max 0, X5CrNi189 max 0,07 max 2,0 0,045 0,03 max 1,0 17,0-20, ,0-11, X19CrMo121 0,19 max 0,8 0,045 0,03 max 0, ,5 max 1, X22CrMoV121 0,22 max 0,7 0,045 0,03 max 0,4 10,5-12,5 max 1,2 - max 0, Pentair reserves the right to change the contents without notice page 4
5 Butt Welding Ends max. 10 Form A max. 10 Form B Butt Welding Ends for Forged Steel Valves to ASME B16.25 ND ND A ,3 3,91 5,54 3,91 5,54 8,74 11, /2 73 5,16 7,01 5,16 7,01 9,53 14, ,9 5,49 7,62 5,49 7,62 11,13 15, ,3 6,02 8,56 6,02 8,56 11,13 13,49 17, ,3 6,55 9,53 6,55 9,53 12,7 15,88 19, ,3 7,11 10,97 7,11 10,97 14,27 18,26 21, ,1 8,18 12,7 8,18 10,31 12,7 15,09 18,26 20,62 23,01 22, ,1 9,27 12,7 9,27 12,7 15,09 18,26 21,44 25,4 28,58 25, ,9 9,53 12,7 10,31 14,27 17,48 21,44 25,4 28,58 33,32 25, ,6 9,53 12,7 11,13 15,09 19,05 23,83 27,79 31,75 35, ,4 9,53 12,7 12,7 16,66 21,44 26,19 30,96 36,53 40, ,53 12,7 14,27 19,05 23,83 29,36 34,93 39,67 45, ,53 12,7 15,09 20,62 26,19 32,54 38,1 44,45 50, ,53 12,7 22,23 28,58 34,93 41,28 47,63 53, ,53 12,7 17,48 24,61 30,96 38,89 46,02 52,37 59,54 Note: Dimensions in mm t sch.std sch.xs sch.40 sch.60 sch.80 sch.100 sch.120 sch.140 sch.160 sch.xxs Form A Form B max. 10 Form 21 DIN 2559 t 12,5 max. 10 Form 3 DIN 2559 t > 12,5 Butt welding Ends for Forged Steel Valves to DIN 2448 PN 09 (160) Pipe PN 15 (250) Pipe PN 25 (500) Pipe DIN ANSI 900 DIN 2448 ANSI 1500 DIN 2448 ANSI 2500 DIN ND ND A t A t A t A t A t A t ,5 17, ,2 2, ,2 2,6 15 1/2 22 2,5 21, ,3 2,6 22 3,5 21,3 3, ,5 33,7 3, ,7 3,6 35 4,5 33, / ,3 3,6 49 5,5 48, ,5 6, ,5 60, , , / ,1 5, ,1 8, ,5 88, ,9 6, ,5 101, ,6 12, , , ,5 139, , , ,5 168,3 12, ,8 17, ,5 193, ,5 193,9 14, ,5 219, ,5 244, , , , ,5 323,9 22, , , , ,5 t : minimum wall thickness A = outside pipe diameter Form 21 Form 3 Pentair reserves the right to change the contents without notice page 5
6 Calculation of Pressure Drop I The coefficient CV is the flow rate of water in gallons per minute at 60 F flowing through a valve with a pressure drop of 1 psi. We have determined from calculation and flow test the coefficients for different valve types and sizes. The results are shown in the table. K v = C v x 0.85 K v is the metric equivalent of C v For liquids Q L = C V P = G L P G L ( ) 2 Q L C V Where: Q L = Flow in U.S Gallons for minute ΔP = (P 1 -P 2 ) Pressure Drop in psi G L = Specific Gravity of Liquid (Water= 1 at 60 F) For gases P 1 + P Q 2 G = 1360 C P V G G T 2 P = P 1 - P 2 1-2G G T ( ) 2 Q G 1360 C V Where: Q G = Volumetric Flow of gas (SCFH) G G = Specific Gravity of Gas at Standard Conditions (Air at atmosphere and 60 F=1) T = Absolute Temperature of Gas ( F +460) ΔP = (P 1 -P 2 ) Pressure Drop in psi For steam W = 2.1 C V P (P 1 + P 2 ) T S P = P 1 - P K2 Where: K = T ( S W 2.1 C V ) and W = Pounds per hour of steam ΔP = (P 1 -P 2 ) Pressure Drop in psi T S = Degree of Superheat ( F) Note: For Saturated Steam T S = 0 C V Flow Coefficient Table Type Pressure Seal Swing Check Pressure ASME 900 ASME 1500 ASME 2500 ASME 4500 DIN PN DIN PN DIN PN DIN PN Size mm 09 (160) 15 (250) 25 (500) 45 (720) 2 1/ Pentair reserves the right to change the contents without notice page 6
7 Calculation of Pressure Drop II Notes A Gate Valve with connecting inlet d1=d Port Diameter B,C Gate Valve with connecting inlet d1> d Port Diameter D Swing Check Valve E Angle Globe Valve Cast Steel F Angle Globe Valve Forged Steel G Straight Globe Valve Cast Steel H Straight Globe Valve Forged Steel K Y-Type Forged Steel F E H G K D z Zeta A Connecting inlet diameter/port diameter d1/d Notes Δp (bar) = Pressure Drop W (m/s) = Velocity (kg/ m 3 ) = Specific Gravity of liquid z (-) = Zeta, resistance value v (m 3 /kg) = Specific Volulme of steam w (m/s) = Velocity G (kg/s) = Flow F (m 2 ) = Flow area µ µ Fluid P = z x x w 2 x Steam P = z x x w 2 x v W = G F x µ W = G x V F T ( C) µ Kg [ ] m 3 P [bar] Pentair reserves the right to change the contents without notice page 7
8 Swing Check Valves Swing Check Valves Figure 6042 to 6045 Fig. Class PN (160) (250) (500) (720) Trim Material to API 600 Body Disc Seat Seating Surface Surface Hinge pin Item % Cr 13% Cr 13% Cr 5 Stellite Stellite 13% Cr 8 Stellite 13% Cr 13% Cr 12 F316/Stellite F316/Stellite F316 Material Specifications Item -20 C C -46 C C 200 C C 250 C C 400 C C 500 C C 38 C C 130 C C A LF2 TT5 F1 15Mo3 F12 13CrMo44 F22 10CrMo910 F91 P91 15CuNiMoNb5 F316 X6CrNiNb Body A LF2 TT5 F1 15Mo3 F12 13CrMo44 F22 10CrMo910 F91 15CuNiMoNb5 F316 X6CrNiNb Bonnet A LF2 TT5 F1 15Mo3 F12 13CrMo44 F22 10CrMo910 F91 15CuNiMoNb5 F316 X6CrNiNb Safety Ring A105 A105 A105 A105 A105 A105 A105 A105 5 Segment Ring A LF2 TT5 F1 15Mo3 F12 13CrMo44 F22 10CrMo910 F91 15CuNiMoNb5 F316 X6CrNiNb Ring A LF2 TT5 F1 15Mo3 F12 13CrMo44 F22 10CrMo910 F91 15CuNiMoNb5 F316 X6CrNiNb Gasket Pure Graphite Pure Graphite Pure Graphite Pure Graphite Pure Graphite Pure Graphite Pure Graphite Pure Graphite 8 Bolts A193 B7 A193 B7 A193 B7 A193 B7 A193 B7 A193 B7 A193 B7 A193 B7 9 Nuts A194 2H A194 2H A194 2H A194 2H A194 2H A194 2H A194 2H A194 2H 13 Plate A LF2 TT5 F12 13CrMo44 F12 13CrMo44 F22 10CrMo910 F22 10CrMo910 A105 C22.8 F316 X6CrNiNb Pins 13Cr 13Cr 13Cr 13Cr 13Cr 13Cr 13Cr F Socket Screw F316 F316 F316 F316 F316 F316 F316 F Hinge A LF2 TT5 F1 15Mo3 F12 13CrMo44 F22 10CrMo910 F22 10CrMo910 A105 C22.8 F316 X6CrNiNb Disc A LF2 TT5 F1 15Mo3 F12 13CrMo44 F22 10CrMo910 F91 15CuNiMoNb5 A105 C Ring A LF2 TT5 F1 15Mo3 F12 13CrMo44 F22 10CrMo910 F91 A105 C22.8 A105 C Pin 13Cr 13Cr 13Cr 13Cr 13Cr 13Cr 13Cr F316 Pentair reserves the right to change the contents without notice page 8
9 ASME Class 900 Pipe connection L B.W. ends L2 RTJ flanged ends to ASME B16.10 L1 B.W. ends to ASME B16.10 Notes 1. All dimensions are in mm. 2. BW: weight for buttweld ends type (Raimondi standard). 3. BW2: weight for buttweld ASME ends type. 4. FL: weight for flanged ends type. 5. R: available on request. 6. The dimensions in bold correspond to our standard dimensions for 1-piece body. ASME Cl. 900/Pressure Rating 09 (PN 160) - fig DN (mm) d 1N x d N DN (in.) d 1N x d N L L 1 L 2 H Pipe Conn. Weight (kg) OD max ID min BW BW2 FL R R R R / R R R R R R x x x x R R R x x x x x x x x x x x x R 1232 R R R R R R x x 20 R R R R R R R R R (200) 6 (150) 41 8 BWL Butt weld ends to Raimondi Standard Trim material Material Specification Nominal Size inches (mm) Connection pipe ends inches (mm) ASME Class 900, press rating 09 (PN 160) Swing Check Valve Raisteam Pentair reserves the right to change the contents without notice page 9
10 ASME Class 1500 Pipe connection L B.W. ends L2 RTJ flanged ends to ASME B16.10 L1 B.W. ends to ASME B16.10 ASME Cl. 1500/Pressure Rating 15 (PN 250) - fig DN (mm) d 1N x d N DN (in.) d 1N x d N L L 1 L 2 H Pipe Conn. Weight (kg) OD max ID min BW BW2 FL / R R R x x x x R R R x x x x x x x x x x x x R R R R R R R R R R R R R R 600 x x 20 R Notes 1. All dimensions are in mm. 2. BW: weight for buttweld ends type (Raimondi standard). 3. BW2: weight for buttweld ASME ends type. 4. FL: weight for flanged ends type. 5. R: available on request. 6. The dimensions in bold correspond to our standard dimensions for 1-piece body (200) 6 (150) 41 8 BWL Butt weld ends to Raimondi Standard Trim material Material Specification Nominal Size inches (mm) Connection pipe ends inches (mm) ASME Class 1500, press rating 15 (PN 250) Swing Check Valve Raisteam Pentair reserves the right to change the contents without notice page 10
11 ASME Class 2500 Pipe connection L B.W. ends L2 RTJ flanged ends to ASME B16.10 L1 B.W. ends to ASME B16.10 Notes 1. All dimensions are in mm. 2. BW: weight for buttweld ends type (Raimondi standard). 3. BW2: weight for buttweld ASME ends type. 4. FL: weight for flanged ends type. 5. R: available on request. 6. The dimensions in bold correspond to our standard dimensions for 1-piece body. ASME Cl. 2500/Pressure Rating 25 (PN 500) - fig DN (mm) DN (in.) L L 1 L 2 H Pipe Conn. Weight (kg) d 1N x d N d 1N x d N OD max ID min BW BW2 FL / R R R x x x x R R R x x x x x x x x R R x x R R x x 18 R R R R R R R R R x x 20 R R R R R R R R R (200) 6 (150) 14 5 BWL Butt weld ends to Raimondi Standard Trim material Material Specification Nominal Size inches (mm) Connection pipe ends inches (mm) ASME Class 2500, press rating 25 (PN 500) Swing Check Valve Raisteam Pentair reserves the right to change the contents without notice page 11
12 Tilting Disc Check Valves Tilting Disc Check Valves Material Specifications Item -20 C C -46 C C 200 C C 250 C C 400 C C 500 C C 38 C C 130 C C A LF2 TT5 F1 15Mo3 F12 13CrMo44 F22 10CrMo910 F91 P91 15CuNiMoNb5 F316 X6CrNiNb Body A LF2 TT5 F1 15Mo3 F12 13CrMo44 F22 10CrMo910 F91 15CuNiMoNb5 F316 X6CrNiNb Bonnet A LF2 TT5 F1 15Mo3 F12 13CrMo44 F22 10CrMo910 F91 15CuNiMoNb5 F316 X6CrNiNb Safety Ring A105 A105 A105 A105 A105 A105 A105 A105 5 Segment Ring A LF2 TT5 F1 15Mo3 F12 13CrMo44 F22 10CrMo910 F91 15CuNiMoNb5 F316 X6CrNiNb Ring A LF2 TT5 F1 15Mo3 F12 13CrMo44 F22 10CrMo910 F91 15CuNiMoNb5 F316 X6CrNiNb Gasket Pure Graphite Pure Graphite Pure Graphite Pure Graphite Pure Graphite Pure Graphite Pure Graphite Pure Graphite 8 Bolts A193 B7 A193 B7 A193 B7 A193 B7 A193 B7 A193 B7 A193 B7 A193 B7 9 Nuts A194 2H A194 2H A194 2H A194 2H A194 2H A194 2H A194 2H A194 2H 13 Plate A LF2 TT5 F12 13CrMo44 F12 13CrMo44 F22 10CrMo910 F22 10CrMo910 A105 C22.8 F316 X6CrNiNb Pins 13Cr 13Cr 13Cr 13Cr 13Cr 13Cr 13Cr F Socket Screw F316 F316 F316 F316 F316 F316 F316 F Disc A LF2 TT5 F1 15Mo3 F12 13CrMo44 F22 10CrMo910 F91 15CuNiMoNb5 F316 X6CrNiNb Guiding bush F6A F6A F6A F6A F6A F6A F6A F316 X6CrNiNb1810 Figure 6042 T.D. to 6045 T.D. Fig. Class PN 6042 TD (160) 6043 TD (250) 6044 TD (500) 6045 TD (720) Trim Material to API 600 Body Disc Seat Seating Surface Surface Hinge pin Item % Cr 13% Cr 13% Cr 5 Stellite Stellite 13% Cr 12 F316/Stellite F316 F316 Pentair reserves the right to change the contents without notice page 12
13 How to order How to order I II III IV V VI VII VIII IX To ASME BW L To ISO BW L I 6 = Raisteam Valve II Type of Valve 04 Swing Check Valve III IV V Class Pressure Rating 09 (PN 160) Pressure Rating 15 (PN 250) Pressure Rating 25 (PN 500) Pressure Rating 45 (PN 720) Connection pipe ends inches (mm) Nominal size inches (mm) VI Material specification, please refer to page 8 & 12 VII Type of trim, please refer to separate page for every valve type according to point VI VIII BW Butt weld ends FR Flanges RTJ BWS Butt weld ends Special IX L End to connections BW to Raimondi standard L1 End to connections BW to ASME B16.10 L2 End to connections Flanged RTJ to ASME B16.10 S1 Lengths of angle valves Pentair reserves the right to change the contents without notice page 13
RAIMONDI. High pressure forged globe valves to guarantee the pressure envelope integrity on harsh services.
Fig. 6022-6025 RAIMONDI High pressure forged globe valves to guarantee the pressure envelope integrity on harsh services. Features Forged body materials of highest quality, all in compliance with ASME
More informationThe excellent performance of the pressure seal type range, is optimal in high pressure and high temperature applications.
The excellent performance of the pressure seal type range, is optimal in high pressure and high temperature applications. Features Swing check valves can fit on both horizontal and vertical (up-flow) piping.
More informationThe bolted bonnet configuration achieves simultaneously the best performance and the highest safety.
The achieves simultaneously the best performance and the highest safety. Features A rugged body and bonnet design in accordance with API 600, ASME B16.34 and BS 1414. Tight shutoff performance is always
More informationBolted bonnet configuration
The bolted bonnet type valves are manufactured to guarantee the highest performance in the widest spectrum of oil and gas applications Features Swing check valves can fit on both horizontal and vertical
More informationCAST STEEL GATE VALVE
CAST STEEL GATE VALVE DESIGN CHARACTERISTICS OF API00 CAST STEEL GATE VALVE The design of thrust bearing makes valve opened easily and flexibly. Handwheel Nut Handwheel Stem Nut Retainer Stem Nut Lubricating
More informationFASANI PRESSURE SEAL CAST GLOBE VALVES - STYLE B Y AND T PATTERN
A wide range of globe valves specifically designed for high pressure and high temperature applications, where low pressure loss is required. FEATURES GENERAL APPLICATION Our pressure seal globe valves
More informationType K03. Gate Valve Butt-Welded, Flanged DN PN Data Sheet Edition: EN 9 / together we are strong
PN 16 100 Gate Valve Butt-Welded, Flanged Data Sheet Edition: EN 9 / 2015 MPOWER Engineering, a.s. Pod vinicí 2028/20, Modřany, 143 00 Praha 4, CZ T: +420 225 371 300, F: +420 225 371 325 E: info@mpowergroup.eu,
More informationSpring Loaded Safety Valve. SiC 11/13/14
Spring Loaded Safety Valve SiC 11/13/14 General Features and Benefits Acc. Directive 97/23/EC of the European Parliament and the Council of 29 May 1997 on the approximation of the laws of the Member States
More informationMSA, a.s., is an important manufacturer of industrial valves from the Czech Republic, Europe. The company manufactures and sells wide range of
API Program MSA, a.s., is an important manufacturer of industrial valves from the Czech Republic, Europe. The company manufactures and sells wide range of industrial valves for transport and processing
More informationGA-1601B (EN) GATE VALVE
GA101B (EN) GATE VALVE ABOUT US FBV Inc. is an ISO 9001 certified company specializing in manufacturing industrial valves including ball valves, gate valves, globe valves, check valves, plug valves and
More informationECOLINE GTC Type Series Booklet
Gate Valve ECOLINE GTC 150-600 Class 150-600 NPS 2''-36'' Cast Steel / Stainless Steel Bolted Bonnet Flanged Ends Type Series Booklet Legal information/copyright Type Series Booklet ECOLINE GTC 150-600
More informationGWC Italia. Proven technology for individual valve solutions worldwide FSV-1005
GWC Italia Proven technology for individual valve solutions worldwide forged STEEL VALVES GATE, GLOBE & CHECK FSV-1005 2 GWC ITALIA Proven technology for individual valve solutions worldwide w w w. g w
More informationFasani Pressure Seal Cast Gate Valves - Style A Wedge Gate and Parallel Slide
A series of robust gate valves specifically designed for applications in the power industry Features General application Our pressure seal -Style A gate valves are recommended for several applications
More informationH i g h P r e s s u r e V a l v e
High Pressure Valve HIGH PRESSURE VALVES Applications & Specifications Range Gate Valve Advantages STRACK has designed and manufactured high pressure valves for over 35 years. Currently more than 3000
More informationITEM DESCRIPTION FIGURE STOP VALVES
INDEX OF STEEL INDUSTRIAL VALVES ITEM DESCRIPTION FIGURE STOP VALVES 01. STRAIGHT PATTERN STOP VALVES PN 40 DN 15-250 for general application ZPZ 1 with control disc for general application ZPR 1 for petroleum
More informationGL-1601C (EN) GLOBE VALVE
GL1C (EN) GLOBE VALVE ABOUT US FBV Inc. is an ISO 9001 certified company specializing in manufacturing industrial valves including ball valves, gate valves, globe valves, check valves, plug valves and
More informationSTAAL 100 Swing check valves PN DN Applications Standard Variants Operating Data Materials Additional Information Purchase Order Data
Type series booklet 7371.1/10-10 STAAL 100 Swing check valves with bolted cover flanged or with butt weld ends AKK AKKS PN 63-100 DN 80-400 Applications In industrial plants, power stations, process and
More informationGLOBE CONTROL VALVES FOR CRYOGENIC SERVICE
GLOBE CONTROL VALVES FOR CRYOGENIC SERVICE 1-6940 Cryo valves are especially designed for cryogenic service. The construction is the same of 1-6941 and 1-6943 standard globe valves with the exception of
More informationSeries 2000 Top Guided Control Valve
Series 2000 Top Guided Control Valve Series 2000 Control Valve Series 2000 process Control Valves. Sturdy design with special service trims available for: Cavitation Control Noise Reduction Top entry construction
More informationHigh-pressure shut-off globe valve V30 High-pressure shut-off globe valve with control cone V40 PN , DN , T max : 550 C
High-pressure shut-off globe valve V30 High-pressure shut-off globe valve with control cone V40 PN 63-160, DN 50 150, T max : 550 C Shut-off globe valve (series V30) or shut-off globe valve with control
More informationTRIPLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.8
α TRIPLE-ECCENTRIC UTTERFLY VALVES TYPE L32.8 Application Triple-eccentric butterfly valves are industrial valves, which designed to fully open or close the passage of the working medium flowing through
More informationFig. VC900PS Design: ASME B16.34
Gate Valves Class 900 DN 50-500 (2 20 ) Carbon, Alloy and Stainless Steel PDS JC-900PS Rev.3 Fig. 900PS Design: ASME B16.34 JC Fábrica de válvulas, s.a. E-Mail: jc@jc-valves.com Internet: www.jc-valves.com
More informationHANCOCK GATE, GLOBE AND CHECK VALVES CAST STEEL
ANCOCK GATE, GOBE AND CECK VAVES CAST STEE A range of ASME Class 150, 300 and 600 bolted bonnet cast steel valves, with metal-to-metal seating in flanged or butt weld ends FEATURES Gate valves Internal
More informationGate valve, billet-forged. p approx. 600 bar DN Applications
Type series booklet 7451.1/11-10 ZTS Gate valve, billet-forged with pressure seal bonnet with butt weld ends p approx. 600 bar DN 50-800 Applications In industrial plants, power stations, process and marine
More informationCheck Valve (Model 6000)
Check Valve (Model 6000) s: - 2 to 24 (50mm to 600mm) Rating: - Class 150 to Class 2500 Cast Steel Valves Flange End But-Weld End Information:- www.invacovalves.com sandesh@invacovalves.com invacovalves@gmail.com
More informationFire Safe Design. Anti-static Device. Anti-Blowout Design. Our firm reserves the right to make any technical changes without any notice to the client.
Sealant injection at stem position Sealant injection at seat position (injection valve + check valve) Anti-Blowout Design For the sake of safety, the stem must be designed with a blow-out proof device
More informationGate, Globe and Check Valves
Gate, Globe and Check Valves 1 COMPANY OVERVIEW Ringo Válvulas (RV) is located in the industrial city of Zaragoza, Spain. Since its establishment RV has designed and manufactured its own cast and forged
More informationSEMPELL. All applications of stop valves up to a Nominal Diameter of 50 mm. VA 500 Serie high-pressure Stop Valves DIN
DIN SEMPELL All applications of stop valves up to a Nominal Diameter of 50 mm. Features Bonnetless die-forged body. One piece body design with packing only. Stellited seat. Stem nut drive sealed against
More informationEXTRACTION CHECK VALVES TYPE C09.6
Application Extraction check valves are valves used to to prevent the back flow of the service fluid in extraction and bleed lines of steam turbines. Each extraction check valve is designed exactly for
More informationSeries 30,000 Rotary Process Valve. Technical data API 609, DIN 3840.
Series 30,000 Rotary Process Valve The outstanding performance of triple offset, metal seated Vanessa Series 30,000 valve is the ideal solution to achieve perfect shutoff in any process. Features Torque
More informationBENTELER Distribution. Pipe solutions to the petrochemical and power generation sectors
BENTELER Distribution Pipe solutions to the petrochemical and power generation sectors About us BENTELER Distribution is an internationally operating stockholding and processing company of steel tubes
More informationFloCheck is a precision engineered, twin plate check valve suitable for product or service lines, wherever non-return protection is required.
FloCheck is a precision engineered, twin plate check valve suitable for product or service lines, wherever non-return protection is required. Features Twin plate, flat seat design for enhanced sealing.
More informationGate Valve (Model 1000)
Gate Valve (Model 1000) s: - 2 to 24 (50mm to 600mm) Rating: - Class 150 to Class 2500 Cast Steel Valves Flange End But-Weld End Information:- www.invacovalves.com sandesh@invacovalves.com invacovalves@gmail.com
More informationHANCOCK 600 GATE, GLOBE AND CHECK VALVES CAST STEEL
ANCOCK 600 GATE, GOBE AND CECK VAVES CAST STEE A range of ASME Class 150, 300 and 600 bolted bonnet cast steel valves, with metal-to-metal seating in flanged or butt weld ends FEATURES Gate valves Internal
More informationHigh pressure strainer D71.2
High pressure strainer D71.2 PN 63 250, DN 20 50, T max : 600 C High-pressure strainer D71.2 with flanges or butt weld ends,strainer insert made of stainlees steel, with nonasbestos gasket. Meets the requirements
More informationSempell High Pressure Stop Valves Model VA510 (DIN)
Designed for highest pressure and temperature applications using high alloy or stainless steels. Features T-pattern globe type Body made of forged steel Wear resistant stellite body seat Conical seat with
More informationType K12. Forged Gate Valve with Pressure Sealed Bonnet Butt-Welded, Flanged DN PN Data Sheet Edition: EN 9 / 2015
PN 63 400 Forged Gate Valve with Pressure Sealed Bonnet Butt-Welded, Flanged Data Sheet Edition: EN 9 / 2015 MPOWER Engineering, a.s. Pod vinicí 2028/20, Modřany, 143 00 Praha 4, CZ T: +420 225 371 300,
More informationCondensed Valve Guide Gate Globe Check Ball Strainer. Warren Valve - Quality Since 1963
800.231.6969 Condensed Valve Guide Gate Globe Check Ball Strainer Warren Valve - Quality Since 1963 Gate, Globe & Check Valves #1156 #2156 #3156 Gate Globe Check Pressures Class Figure 150 - #1156 300
More informationGWC Italia. Proven technology for individual valve solutions worldwide HIGH PERFORMANCE BUTTERFLY VALVE HPB-1003
w w w. g w c i t a l i a. c o m GWC Italia Proven technology for individual valve solutions worldwide HIGH PERFORMANCE BUTTERFLY VALVE HPB-1003 1 1 GWC ITALIA Proven technology for individual valve solutions
More informationL&T VALVES BUSINESS GROUP A
Larsen & Toubro Limited (L&T) is a US $ 5 billion engineering and construction company, with a strong presence in manufacturing, services and Information Technology. L&T was founded in 1938 by two Danish
More informationMasoneilan * Pressure Regulators Steam, Gas or Liquid Service Models 525 and 526
GE Oil & Gas Technical Specifications 05/2013 Masoneilan * Pressure Regulators Steam, Gas or Liquid Service Models 525 and 526 Pressure Reducing, Back Pressure and Differential Pressure Control 2 GE Oil
More informationTriple offset valve with metallic seat for High performance. Class 600: 8 to 24 (DN 200 to 600) Design in accordance with EN and ASME B16-34
Type series booklet 8613.1786/5--EN TRIODIS 600 Triple offset valve with metallic seat for High performance Class 600: 8 to 24 (DN 200 to 600) Design in accordance with EN 12516 and ASME B16-34 Applications
More informationPARCOL SERIES CONTROL VALVES
PAROL -9 SERIES ONTROL VALVES PAROL -9 SERIES ONTROL VALVES The line of PAROL -9 series control valves provides the most versatile globe body type single seat available with heavy top guiding design.
More informationSeries W&T Pneumatic Control Valve Type RVG Globe valve and angle valve
Series W&T Pneumatic Control Valve Type RVG Globe valve and angle valve Application Control valve for feedwater and steam applications in power plant engineering and the petrochemical industry Nominal
More informationGate valve S38 PN , DN , T max : 540 C
Gate valve S38 40-100, DN 40 400, T max : 540 C Shut off gate valve with outsidescrew, rising stem, non-rising hand wheel, with bolted bonnet, with flanges or with butt weld ends, flexible or split wedge,
More informationtechnical description:
The gate valves are used as the closing valves for: - noncorrosive fluids - saturated steam - oil - air - petroleum and petroleum products Operating parameters are in accordance with the standard ASME
More informationTRUNNION BALL VALVES. TBV 7.10
TRUNNION BALL VALVES WWW.VALVE.COM TBV 7.10 ABOUT US Our mission at Universal Flow (), is to provide a quality product at a competitive price and to meet the needs and requirements of our customers in
More informationCONTROL VALVES EURO CHLOR
CONTROL VALVES EURO CHLOR PHÖNIX Armaturen-Werke Bregel GmbH P +49 (5693) 988-0 F +49 (5693) 988-140 info@phoenix-armaturen.de www.phoenix-armaturen.de APPLICATIONS & DESIGN FEATURES FIG. NO. 350EC8-9
More informationSingle Seated Globe Control Valves
Product 1: Top Guided Single Seated Control Valves Type: Globe Size: 1-1/2'', 2'', 2-1/2'', 3'', 4'', 6''and 8 (DN40 DN200) Pressure Rating: ANSI 125 ~ ANSI 600 (PN16~PN64, JIS10K~JIS40K) Body Material:
More informationHoneywell EN REV. 2 09/2014 Page 1 of 10 Specification
Series 9110 Single/Double Seated Globe Valves for ANSI 150-600 DIN/BS 4504 PN10-PN40 Honeywell 70-16-10-05 EN REV. 2 09/2014 Page 1 of 10 Specification Series 9110 Single/Double Seated Globe Valves for
More informationNORI 500 ZXLR/ZXSR. Type Series Booklet
Globe Valve NORI 500 ZXLR/ZXSR PN 250-500 DN 10-50 With Gland Packing With Back Seat Flanged or with Butt or Socket Weld Ends Type Series Booklet Legal information/copyright Type Series Booklet NORI 500
More informationSempell Dewrance Check valves Bled steam
Features General application The Dewrance bled steam check valve has been designed specifically for use on power generation steam turbines for extraction and cold reheat applications where reliable non-return
More informationSV80H Safety and Relief Valves
Page 1 of 18 BR Rev.02 U SH Safety and Relief alves Description The SH is a full nozzle safety and relief valve with orifices D to T, comply with the API STD 526, beyond others with super capacity. Suitable
More informationWENZHOU BAIJI VALVE CO.,LTD
API valves Cataloge 2006 All rights reserved by Wenzhou Baiji Valve Co.,Ltd CN. API 600 CAST STEEL VALVES COMPANY INTRODUCTION Wenzhou Baiji Valve Co.,LTD. BJ VALVES, is a diversified global supplier of
More informationHinge Pin. 7 Bearing. Spring Plate. Spring. Disc. Body. Gasket. Stop PIn
Hinge Pin Bearing Spring Plate Spring Disc Body Gasket Stop PIn TYPICAL MATERIAL OF MAIN PARTS No. Part Name Carbon Steel Stainless Steel Alloy Steel 1 Stop Pin 2 Gasket 3 Body 4 Disc 5 Spring 6 Spring
More informationCE43 1" (DN25) to 4" (DN100) Carbon Steel Cage Design, Two Port Control Valves
Globe 13 CE43 1" (DN25) to 4" (DN) Carbon Steel Cage Design, Two Port Description The CE43 series is a range of carbon steel two port, cage trim, control valves conforming to ANSI B16.34, ASME VIII standards
More informationSeries 240 Type 3351 Pneumatic On/off Valve
Series 240 Type 3351 Pneumatic On/off Valve Application Shut-off valve with tight shut-off for liquids, gases and vapors according to DIN or ANSI standards Valve size DN 15 to 100 NPS ½ to 4 Pressure rating
More informationALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN
BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric
More informationPN63 - PN160. ARI-STOBU PN Stuffing box valve. Stop valve with gland seal - metallic sealing. ARI-STOBU - Straight through with flanges
Stuffing box valve Stop valve with gland seal - metallic sealing ARI-STOBU - Straight through with flanges PN63 - PN160 Forged steel High temperature steel Fig. 006 Seite 2 ARI-STOBU - Straight through
More informationSeries 240 Pneumatic On-off Valve Type 3351
Series 240 Pneumatic On-off Valve Type 3351 Application Control valve with a tight shutoff of liquids, gases and steam in accordance with DIN or ANSI standards Nominal sizes DN 15 to 100 NPS ½ to 4 Nominal
More informationCast iron Nodular iron Cast steel BR 003/303 Page 2. Cast iron Nodular iron Cast steel BR 004/304 Page 3. Forget steel BR 030 Page 4
Check valve Straight through with flanges (except GG-25) Cast iron Nodular iron Cast steel BR 003/303 Page 2 Straight through with flanges Forged steel BR 003 Page 2 BR 003 Straight through with flanges
More informationBUTTERFLY VALVE WAFER TYPE of carbon steel 311 ( ) series
Operation WAFER TYPE of carbon steel 311 (310-312) series C ont R o L Description Edition 23-07-2015 Wafer type butterfly valve 311 (310 312) series is used in industrial pipelines for demanding on-off
More informationTECHNICAL DATASHEET Pacific CSV Cast Steel Valves
brands you trust. TECNICA DATASEET Pacific CSV Cast Steel Valves Crane ChemPharma & Energy Gate, Globe and Check Features and Benefits The new Pacific CSV valves have been redesigned to improve performance
More informationHopkinsons CONTENTS SCHEDULE OF SHELL BOILER MOUNTINGS. Hopkinsons. Safety Valves 5. Boiler Stop Valves 17. Feed Check Valves 18. Blowdown Valves 20
Hopkinsons SCHEDULE OF SHELL BOILER MOUNTINGS Quality assurance Weir Power & Industrial operates quality programmes to cover the full scope of their activities. Comprehensive quality systems have been
More informationBUTTERFLY VALVE WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) and 41001
Operation WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) 41101 and 41001 C ont R o L Description Edition Wafer type butterfly valve 411 (410) series are used in industrial
More informationType. Type 457, , 458. Flanged Safety Relief Valves spring loaded
Type Type 458 Packed lever H4 Closed bonnet Conventional design 457, 458 Flanged Safety Relief Valves spring loaded Contents Chapter/Page Materials Conventional design 09/02 Balanced bellows design 09/04
More informationSERIES VARISTEP CONTROL VALVES
1-6962 SERIES VARISTEP CONTROL VALVES Introduction Cavitation is a well-known phenomenon which frequently occurs when high liquid pressure drops associated with relatively high temperatures are handled
More informationT EN Type 3347/3379 Pneumatic Control Valve Type 3347 Hygienic Angle Valve
T 8097-3 EN Type 3347/3379 Pneumatic Control Valve Type 3347 Hygienic Angle Valve Application Control valve for hygienic applications in the food and pharmaceutical industries Valve size DN 6 to NPS ¼
More informationSTEVI 440 / 441. Straight through control valve DN
with electric and pneumatic actuators Straight through control valve DN 15-100 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches 1 travel switch Handwheel Additional devices available, e.g.
More informationSTEAM TURBINE BY-PASS AND STEAM CONDITIONING VALVE
STEAM TURBINE BY-PASS AND STEAM CONDITIONING VALVE Benefits Savings of up to US$ 200.000 per year in maintenance costs Production gains due to superior stability of the temperature control Operational
More informationThe globe valves are used as a closing valve for: - noncorrosive fluids - saturated steam
The globe valves are used as a closing valve for: - noncorrosive fluids - saturated steam - oil - air - petroleum and petroleum products The Characteristics of working conditions: pressure dependency on
More informationSEVERE SERVICE BELLOWS SEALED VALVES EURO CHLOR TYPE 350EC.4-5
SEVERE SERVICE BELLOWS SEALED VALVES EURO CHLOR TYPE 350EC.4-5 PHÖNIX Armaturen-Werke Bregel GmbH P +49 (5693) 988-0 F +49 (5693) 988-140 info@phoenix-armaturen.de www.phoenix-armaturen.de BELLOWS SEALED
More informationSeries 240 Type and Type Pneumatic Control Valves Type 3244 Three-way Valve
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve DIN and ANSI versions Application Mixing or diverting valve for process engineering and industrial applications
More informationGlobe valves Shut-off check valve 200 AE/BE PN DN Globe valves Lift check valve 240 MT PN DN 10-50
Globe valves Shut-off check valve 200 AE/BE PN 10-160 DN 10-50 Globe valves Lift check valve 240 MT PN 10-160 DN 10-50 Admissible operating pressure [bar] at design temperature [ C] 1) Material PN -200-60
More informationGrey cast iron Fig. 600 Page 2. Forged steel High temperature steel Stainless steel Fig. 600/601 (Y) DN15-25 Page 4 DN40-50 Page 6
Bimetallic steam trap CONA B Bimetallic steam trap Bimetallic steam trap PN16 - with flanges (Fig. 600...1) - union with butt weld ends (Fig. 600...5) Grey cast iron Fig. 600 Page 2 Bimetallic steam trap
More informationbrands you trust. KROMBACH Check Valves
brands you trust. KROMBACH Check Valves Check Valves Key Features TURK Steam Extraction Check Valves (RK 500) Key Features Free swing disc design for minimal pressure drop and wear Gravity, lever and weight,
More informationBALL VALVES 4Evergreen Valve
BALL VALVES 4Evergreen Valve 4E represents Excellent quality, Excellent delivery, Excellent service and all at an Excellent price. 4E valve was founded by a group of enthusiastic people with more than
More informationDEWRANCE. Check Valve Bled Steam
Check Valve Bled Steam DEWRANCE Features & Benefits Excellent Reliability - Internal Counterweight to balance disc under low load conditions - Direct deposited seats - Tilting disc design for quick closing
More informationCOMPANY PROFILE TABLE OF CONTENT. Our products have been supplied to local and foreign customers for the following industries:
UTTERFLY VALVES TALE OF CONTENT COMPANY PROFILE The company ARMATURY Group a.s. is a leading Czech manufacturer and distributor of industrial valves, fittings and control systems for valves. The annual
More informationNORI 320. Globe valves PN DN Applications. Standard variants. Operating data. Additional information. Materials.
Type series booklet 7640.1/6-10 NORI 320 Globe valves with gland packing with non-rotating stem bonnetless, with bajonet-type body / yoke connection flanged or with butt or socket weld ends PN 250-320
More informationRate B standard. Rate A Rate A option. max +260 C/ min -40 C
of carbon steel 315 -series C ont R o L Description Edition 30-03-2015 The welded butterfly valve 315 is used for example in district heating, district cooling and industry. It can be used as an on-off
More informationANSI GATE, GLOBE AND CHECK VALVES & STRAINERS
ANSI GATE, GLOBE AND CHECK VALVES & STRAINERS INDEX 2 8 16 20 32 36 44 50 54 58 62 66 78 THE COMPANY CAST GATE VALVES CAST GATE VALVES PRESSURE SEAL CAST GLOBE VALVES CAST GLOBE VALVES PRESSURE SEAL CAST
More informationSTEVI 440 / 441. Straight through control valve DN
with electric and pneumatic actuators Straight through control valve DN 15-100 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches 1 travel switch Handwheel Additional devices available, e.g.
More informationForged Steel Valves Comparison Chart 1. Standard material Specification 2. Figure Number 3. Gate Valves 4-5. Globe Valves 6-7. Y-Globe Valves 8-9
INDEX Forged Steel Valves Comparison Chart 1 Standard material Specification 2 Figure Number 3 Threaded, Socket Welded & Butt Welded Ends Gate Valves 4-5 Globe Valves 6-7 Y-Globe Valves 8-9 Check Valves
More informationOSV. Forged Steel Valves Technical book OSV
OSV Forged Steel Valves Technical book OSV Principles Of Company General Introduction Company History About the company OS Valves (OSV) is a subsidiary of OS Company. OSV has been inspiring our employees
More informationSeries 2003 / Three-way control valve. Features. Wörth am Main
Series 2003 / 2013 Three-way control valve SPECIFICATION The Series 2003 / 2013 comprises a range of skirt guided Three-way mixing (2003) and diverting valves (2013). Available in a variety of sizes, they
More informationCHECK VALVES. Bolted Bonnet - Full Opening - Pressure Seal - Wafer Dual Plate, Single Plate & Tilting Disc.
A Long Experience in Energy Equipment and one Goal: The Customer s satisfaction. CHECK VALVES Bolted Bonnet - Full Opening - Pressure Seal - Wafer Dual Plate, Single Plate & Tilting Disc. Swing Check Valves
More informationNORI 320 ZXSV Type Series Booklet
Globe Valve NORI 320 ZXSV PN 250-320 DN 10-50 Type Series Booklet Legal information/copyright Type Series Booklet NORI 320 ZXSV All rights reserved. The contents provided herein must neither be distributed,
More informationTriple Eccentric Control and Shut-off Butterfly Valve Series 14t
Application: Triple Eccentric Control and Shut-off Butterfly Valve Series 14t Triple eccentric butterfly valve providing excellent shut-off in all industrial applications: Nominal size DN 80 to DN 400
More informationCONTROL VALVE STANDARD SPECIFICATION
CONTROL VALVE STANDARD SPECIFICATION QUICK CHANGE TYPE 2-WAY GLOBE VALVE YAD-122Q1 Series http://www.proval.co.kr PROVAL Co., Ltd. [B-1] TOP GUIDE SINGLE SEATED TYPE GENERAL The design of Quick Change
More informationECOLINE GTF 800 Type Series Booklet
Gate Valve Class 800 NPS ½''-2'' Type Series Booklet Legal information/copyright Type Series Booklet All rights reserved. The contents provided herein must neither be distributed, copied, reproduced, edited
More informationCast iron Nodular iron BR 006/306 Page 2. BR 006/306 Page 2. Forged steel BR 006 Page 3. Stainless steel BR 006 Page 3. Forged steel BR 005 Page 5
ARI-STOBU - Stop valve with gland seal STOBU Stop valve with gland seal ARI-STOBU Globe valve with flanges TRB 801 No.45 (except cast iron) ARI-STOBU Globe valve with flanges TRB 801 No.45 Test approvals
More informationYarway Narvik Ven-Temp Desuperheater Model 25
Yarway covers requirements for Desuperheaters, pneumatic actuators, strainers with a wide range of models, sizes and materials to satisfy all the specifications of the power, pulp and paper industry and
More information41005 Series Control Valves. Specification Data CH /10
Putting You In Control Specification ata CH41005 11/10 41005 Series Control Valves Complete Line of Heavy uty, Balanced, Cage Guided, Globe Valves with Lo-dB Anti-Cavitation Capabilities resser Masoneilan
More informationControl Valve. 3-Piece 30, 60, or 1/8" Slotted Port. General Chemical. Industrial. Power INLINE BALLVALVE.COM
324 Control 3-Piece 30, 60, or 1/8" Slotted General Chemical Industrial Power INLINE BALLVALVE.COM The 324 Series Control The 324 series control valve incorporates several innovative design features for
More informationSempell High Pressure Stop Valves Model VA500 (DIN)
Designed for the isolation and control of high temperature and high pressure systems, this multipurpose globe valve can be used in a wide variety of applications. Features Type tested (except for material
More informationLTG3 Globe Control Valves Standard Trim
A Long Experience in Energy Equipment and one Goal: The Customer s Satisfaction. LTG3 Globe Control Valves Standard Trim Doc. num. G03STT rev.1 TABLE OF CONTENTS LTG3 - LTG3 LN - LTG3 DS : GENERAL FEATURES...
More information10.1 Introduction Connections Overview
Content 10.1 Introduction...10.1-1 10.2 Connections Overview...10.2-1 10.2.1 Pressure/Temperature Rating of Connection versus Safety Valve...10.2-1 10.2.2 Flanged Connections...10.2-1 10.2.3 Threaded Connections...10.2-2
More informationARI-CHECKO -V / -D Check valve ARI-Check valve, metallic sealing
ARI-CHECKO -V / -D Check valve ARI-Check valve, metallic sealing Straight through with flanges (except EN-JL1040) Straight through with flanges Straight through with flanges Angle pattern with flanges
More informationD1 Series Top Guided Single Seated Control Valves
D1 Series Top Guided Single Seated Control Valves Model D1S Overview Model D1S globe control valves are with bolted bonnet and top guided contoured trims. The design facilitates easy access to internal
More information