Product Catalog. Rev. 612 r1
|
|
|
- Magnus Jackson
- 6 years ago
- Views:
Transcription
1 Product Catalog Rev. 612 r1
2 PIPE FITTINGS CONDUIT FITTINGS PRODUCT CATALOG Pipe Nipples Welded and Seamless Carbon Steel 2 Pipe Nipples Welded and Seamless Stainless Steel 3 Pipe Nipples End Finishes 4 Couplings Standard Merchant Full 5 Couplings Standard Merchant Half 6 Couplings Extra Heavy No Recess Full 7 Couplings Extra Heavy No Recess Half 8 Couplings API Line 9 Hex Bushings Standard Pressure 10 Pipe Plugs Standard Pressure Square Head 11 Pipe Plugs Standard Pressure Square and Hex Counter Sunk 12 Serrated Adapters, Male for Plastic Pipe 13 Serrated Adapters, Insert Couplings 14 Serrated Adapters, Well Seal Elbows 15 Serrated Adapters, Male Venturi 16 Conduit Elbows Rigid 17 Conduit Elbows EMT 18 Conduit Couplings 19 Conduit Nipples Rigid Stainless Steel Conduits with Coupling Winnipeg Street Vanastra, ON N0M1L0 Phone: (519) Fax: (519) (800) (800) sales@capproducts.com 1
3 Pipe Nipples, Welded and Seamless, Carbon Steel Black and Galvanized B A Length C Nominal Wall Pipe Size Pipe O.D. Close Space STD. XH 160 XXH 1/ /4 1 1/ N/A N/A 1/ /8 1 1/ N/A N/A 3/ / N/A N/A 1/ /8 1 1/ / /8 1 1/ / / /8 2-24, / / / / / / / / N/A N/A / / /8 4 1/ / Conforms to: Finish: ASTM A53 Type F (Continuous Welded). ASTM A53 Type E, Grade B (Electric Resistance Welded). ASTM A106 Grade B, ASTM A53 Type S, Grade B, API 5L, Grade B Seamless, High Temperature. ASTM A333 Grade 6 (Available only in XH, 160 and XXH) Seamless, Low Temperature. Standard Black or Galvanized 2
4 Pipe Nipples, Welded and Seamless, Stainless Steel B A Length C Nominal Wall Pipe Size Pipe O.D. Close Space STD. XH 160 XXH 1/ /4 1 1/ N/A N/A 1/ /8 1 1/ N/A N/A 3/ / N/A N/A 1/ /8 1 1/ / /8 1 1/ / / / / / / / / / / / N/A N/A / / /8 4 1/ / Conforms to: ASTM A312, Type 304/304L or 316/316L (Electric Resistance Welded). ASTM A312 Type 304/304L or 316/316L Seamless. 3
5 25 Winnipeg Street Vanastra, ON N0M1L0 CANADA Pipe Nipple End Finishes CapProducts Ltd. 4 Phone: Fax:
6 Couplings, Standard Merchant Pipe Size 1/8 1/4 3/8 1/2 3/ /4 1-1/ / / A B Wt. Ea Conforms to: Notes: AISI C1010, Sizes 1/8 to 1. ASTM A53 Type F Sizes 1-1/4 to 3. ASTM A106 Grade B Sizes 3-1/2 to 6. ASTM A865, ASME B Unless otherwise specified, Standard Merchant Couplings are furnished straight tapped in sizes 1/8 to 2 inclusive. Standard Merchant Couplings in 2 size are available Taper Tapped as special. Galvanized couplings are electroplated zinc. Black couplings are phosphate coated. 5
7 Half Couplings, Standard Merchant Pipe Size 1/8 1/4 3/8 1/2 3/ /4 1-1/ / / A B Wt. Ea ASTM A53 Type F Sizes 1/8 to 3. ASTM A106 Grade B Sizes 3-1/2 to 6. Conforms to: Notes: ASTM A865, ASME B Unless otherwise specified, Standard Merchant Half Couplings are furnished Taper Tapped in sizes 1/8 to 1 inclusive, Straight Tapped in sizes 1-1/4 to 2 inclusive and Taper Tapped in sizes 2-1/2 to 6 inclusive. Galvanized couplings are electroplated zinc. Black couplings are phosphate coated. 6
8 Couplings, XH No Recess, Threaded Couplings, XH No Recess, Threaded Pipe Size *1/8 1/4 3/8 1/2 3/ /4 1-1/ /2 3 *3-1/2 *4 *5 *6 A B Wt. Ea ASTM A105. Dimensions: AAR 404, ASME B Note: Sizes marked * not covered under AAR 404 7
9 Half Couplings, XH No Recess, Threaded Pipe Size *1/8 1/4 3/8 1/2 3/ /4 1-1/ /2 3 *3-1/2 *4 *5 *6 A B Wt. Ea Dimensions: ASTM A105 or Seamless Tubing. AAR 404, ASME B Note: Sizes marked * not covered under AAR
10 API Line Pipe Couplings Pipe Size 1/8 1/4 3/8 1/2 3/ /4 1-1/ / / A B C D Wt. Ea API 5L Section 8 Dimensions: API 5L, API 5B 9
11 Hex Bushings, Standard Pressure Pipe Size 1/4 3/8 1/2 3/4 1 A B C Wt. Ea Conforms to: AISI C1010 ASME B16.14, ASME B Sizes Available: 1/4 X 1/8 3/4 X 1/8 1 X 1/8 3/8 X 1/8 3/4 X 3/4 1 X 1/4 3/8 X 1/4 3/4 X 3/8 1 X 3/8 1/2 X 1/8 3/4 X 1/2 1 X 1/2 1/2 X 1/4 1 X 3/4 1/2 X 3/8 10
12 Pipe Plugs, Standard Pressure, Square Head Pipe Size 1/8 1/4 3/8 1/2 3/4 A B C Wt. Ea Conforms to: Notes: AISI C1008-C1010. SAE J531, ASME B Dimensions conform to SAE-J531 Threads conform to NPTF tolerance specified to ASME B Materials conform to AISI C All sizes available in raw black phosphate with rust inhibitor or electroplated zinc. 11
13 Pipe Plugs, Standard Pressure, Square & Hex Counter Sunk Pipe Size 1/8 1/4 3/8 1/2 3/ /4 1-1/2 2 A B C D Wt. Ea Conforms to: Dimensions: AISI C1008-C1010, AISI C12L14 SAE J531, ASME B16.14, ASME B SAE J531, ASME B16.14, ASME B Notes: Dimensions of sizes from 1/8 through 1 conform to SAE J531. Dimensions of sizes from 1-1/4 through 2 conform to ASME B Threads conform to NPTF tolerances specified in ASME B Materials for sizes 1/8 through 1-1/4 conform to AISI C Materials for sizes 1-1/2 through 2 conform to AISI C12L14. All sizes available in raw black prosphated with rust inhibitor or electroplated zinc. 12
14 Serrated Male Adapters for Plastic Pipe 1/2 3/ /4 1-1/ /2 3 4 Part Number M-10 M-20 M-30 M-40 M-50 M-60 M-70 M-80 M-90 A B C Wt. Ea Notes: ASTM A53 Galvanized Pipe, ASTM B43 Red Brass Use with Schedule 40 Plastic Pipe Plastic Pipe must be secured to Adapter with One or Two Worm Type Hose Clamps Pressure Rating equals that of Plastic Pipe 13
15 Serrated Adapters Insert Couplings Pipe Size 1/2 3/ /4 1-1/ /2 3 4 Part Number C-10 C-20 C-30 C-40 C-50 C-60 C-70 C-80 C-90 A B C D Wt. Ea Dimensions: Notes: ASTM A53 Galvanized Pipe, Serrated Dimensions per ASTM D2609 Use with Schedule 40 Plastic Pipe Plastic Pipe must be secured to Adapter with One or Two Worm Type Hose Clamps Pressure Rating equals that of Plastic Pipe 14
16 Serrated Adapters, Well Seal Elbows Pipe Size Part Number Dim A Ref Dim B R Steel R Brass 1 W /4 3-3/ /4 1-1/4 W /4 3-3/4 4-7/8 3-7/8 Styles: Dimensions: Notes: Both Ends Serrated or One End Serrated x NPT Pipe Threads ASTM A53 Galvanized Pipe, ASTM B43 Red Brass Serrated Dimensions per ASTM D2609, NPT Pipe Threads per ASME B Use with Schedule 40 Plastic Pipe Plastic Pipe must be secured to Adapter with One or Two Worm Type Hose Clamps Pressure Rating equals that of Plastic Pipe 15
17 Serrated Adapters, Male Venturi Pipe Size Part Number OD FL SL Maj. Dia. 1 MV / /4 MV / Dimensions: Notes: ASTM A53 Galvanized Pipe Serrated Dimensions per ASTM D2609, NPT Pipe Threads per ASME B Use with Schedule 40 Plastic Pipe Plastic Pipe must be secured to Adapter with One or Two Worm Type Hose Clamps Pressure Rating equals that of Plastic Pipe 16
18 Conduit Fittings Rigid Conduit Elbows 90 and 45 Standard Radius Size Radius R 90 B Dim. 45 B Dim. 45 C Dim. 1/ / /16 3-1/4 3/4 4-1/2 6-3/4 8-11/16 3-5/ /4 8-5/8 9-3/ /16 1-1/4 7-1/4 10-1/ /16 4-7/16 1-1/2 8-1/4 11-9/ /16 4-7/ /2 14-1/ /8 6-1/8 2-1/2 10-1/ /16 7-9/ / /16 8-1/2 3-1/ / /16 9-5/ /8 24-1/2 10-1/ /8 38-1/4 15-7/ / /8 Special Radius Radius R Sizes Available 90 B Dim. 45 B Dim. 45 C Dim thru 2-1/ /8 9-7/ thru / thru /4 12-3/ thru / / thru / thru /4 18-5/ thru / / thru /8 22-9/16 Notes: Galvanized Steel, 304 Stainless Steel and Aluminum Elbows are listed c UL us and meet requirements of both CSA and UL. 5 and 6 Elbows are available only in Galvanized Steel and Aluminum. 316 Stainless Steel Elbows are available upon request. Aluminum Elbows are made from 6063 alloy with a maximum Copper content of 0.1%. Radius R is the minimum. Dimensions B and C are reference dimensions. 11-1/4, 15, 22-1/2, 30 and 60 Elbows are also available. Both ends NPT threads conform to ANSI B
19 Conduit Fittings EMT Elbows 90 and 45 Standard Radius Size Radius R 90 B Dim. 45 B Dim. 45 C Dim. 1/ / /8 3/4 4-1/2 6-11/16 7-7/8 3-1/ /4 8-9/ / /16 1-1/4 7-1/ / /2 8-1/4 11-1/2 11-3/8 4-11/ /2 14-1/ /16 2-1/2 10-1/ / /8 3-1/ /16 9-7/ / / /8 Special Radius Radius R Sizes Available 90 B Dim. 45 B Dim. 45 C Dim /4 thru 1-1/ /8 9-7/ /2 thru / /4 thru /4 12-3/ thru / / thru / /2 thru /4 18-5/ /2 thru / / /2, 3 thru /8 22-9/16 Galvanized Steel EMT Elbows are listed c UL us and meet requirements of both CSA and UL. Notes: Radius R is the minimum. Dimensions B and C are reference dimensions. 11-1/4, 15, 22-1/2, 30 and 60 Elbows are also available in Standard Radius only. 18
20 Conduit Fittings Conduit Couplings Size Threads per inch OD inches Minimum Length FL 1/ /8 3/ / / /32 1-1/4 11-1/ /32 1-1/2 11-1/ / / /8 2-1/ / /16 3-1/ / / / /4 Notes: Galvanized Steel, 304 Stainless and Aluminum Conduit Couplings meet requirements of both CSA and UL. Aluminum Conduit Couplings are made from 6063 alloy with a maximum Copper content of 0.1%. 304 Stainless Steel Conduit Couplings are available only up to 4 size. O.D. of Stainless Steel Conduit Couplings may be larger than shown. 19
21 Conduit Fittings Conduit Nipples Size Diameter B Dim A Close Length 1-1/ / / / / / /8 X X X X X X X X X X X X X 3/ /8 X X X X X X X X X X X X X /2 X X X X X X X X X X X X 1-1/ /8 X X X X X X X X X X X X 1-1/ /4 X X X X X X X X X X X X X X X X X X X X X X X 2-1/ /2 X X X X X X X X X X /8 X X X X X X X X X X 3-1/ /4 X X X X X X X X /8 X X X X X X X X X X X X X X X /8 X X X X X X X Notes: Galvanized Steel, 304 or 316 Stainless Steel and Aluminum Conduit Nipples are listed CSA and meet the requirements of both CSA and UL. Aluminum Conduit Nipples are made from 6063 alloy with a maximum Copper Content of 0.1%. Lengths longer than 12 and Special threads are available upon request. Both ends NPT threads conform to ANSI B
22 Conduit Fittings 10 Rigid Stainless Steel Conduits with Coupling Size L Dim. 1/2 9' 11-1/4'' 3/4 9' 11-1/4'' 1 9' 11'' 1-1/4 9' 11'' 1-1/2 9' 11'' 2 9' 11'' 2-1/2 9' 10-1/2'' 3 9' 10-1/2'' 4 9' 10-1/2'' Note: 304 Stainless Steel Conduits with Coupling are listed CSA and meet requirements of both CSA and UL. Both ends have NPT threads and conform to ANSI B
MANUFACTURING SPECIFICATION
Swage Nipples, Bull Plugs & Oil Country Fittings Catalogue SWAGE NIPPLES, BULL PLUGS, OIL COUNTRY FITTINGS, COUPLINGS, LOW TEMP & STAINLESS SWAGES MANUFACTURING SPECIFICATION CSP Products Ltd, manufactures
Full Traceability. Material Specification. Raw Material Code. Heat Treatment
All J.B. Smith swages, bull plugs, tubing and casing nipples, and chambers are traceable to the original mill test report. To ensure traceability, all fittings are steel stamped as follows: Material Specification
PIPE NIPPLES. Welded Pipe Nipples - Black & Galvanized. q Approved q Approved as noted q Not approved. Standard Schedule 40, XH Schedule 80
Welded Nipples - Black & Galvanized Standard Schedule 40, XH Schedule 80 q FIG. 9: Standard Black Schedule 40 q FIG. 8: Extra Heavy Black Schedule 80 q FIG. 4: Standard Galv. Schedule 40 q FIG. 42: Extra
Price Sheet PCE129 Effective: December 7, 2009 Cancels Price Sheet PCE068 of June 2, 2008
Quality Product for Quality People BECK Pipe Couplings Price Sheet PCE129 Effective: December 7, 2009 Cancels Price Sheet PCE068 of June 2, 2008 NOTE: Subject to change without notice. Visit our Web site
Yl)HAl STrrl (INDIA) Forged High Pressure Pipe Fittings. All ISO 9001:2003/ ISO 14001:2004 / 8S Ol!SAS 18001:2007 / PED Al'PROl'ED 97/23/EC
Forged High Pressure Pipe Fittings Forged High Pressure Pipe Fittings Summary : Summary : Type 1. Elbow, Tee, Cross, Couplin g, Half Coupling, Cap, Plug, Bushing, Union, HEX. Nipple, Swage 2. nipple, Bull
FIG Gruvlok Flange Adapter
FIG. 88 Gruvlok Adapter The Gruvlok Fig. 88 Adapter allows for direct connection of Class 125 or Class 150 flanged components to a grooved piping system. The Gruvlok Adapter provides an alternative method
flowconme Types of Fittings Available Wall Thickness Sch 5 - Sch 160 (Sch 5s - Sch 160s) Others available upon special request
FITTINGS Overview Types of Fittings Available 45, 9 Elbows, 18 Returns (Short & Long Radius) Tees & Crosses (equal & reducing), Reducers (concentric & eccentric), Caps, Stud Ends, Weldolets, Outlets, Laterals
DK-LOK Hydraulic Pipe Fittings
Class 2000, 3000, 6000, 9000 fittings Catalog No. C-2 June 2012 DK-LOK Hydraulic Pipe Fittings are designed and manufactured to the following standards. ASME B 16.11-2005: Forged fittings, Socket-welding
Rigid Metal Conduit, IMC or EMT K-Clamps
65178 Rigid Metal Conduit, IMC or EMT K-Clamps Wt. Lbs. Std. Catalog No. Size (In.) Per 100 Pkg. Right Angle Type Right Angle Type Hot Dip/Mechanically Galvanized* For Rigid, IMC, EMT PC-50RA 1/2 37.0
Carbon Steel Nipples
CORPORATE OFFICE TEL (800) 766-0076 LOCAL (323) 890-4455 WWW.SMITHCOOPER.COM FAX (323) 890-4456 Carbon Steel Nipples Schedule 40 & 80 Welded, Schedule 80 Seamless, & XXH Seamless Carbon Steel Nipples Specifications
General Cable Support Information
General Cable Support Information Applications Used to support cables in vertical raceways or risers. Relieves the strain that would be placed on terminations, the interior of panels, or other devices
Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable
B U I L D I N G C O N N E C T I O N S T H AT L A S T
B U I L D I N G C O N N E C T I O N S T H AT L A S T pipe to pipe and people to people. We pride ourselves in providing the finest-quality pipe products and services with integrity and dedication to superior
Class 300, Welding Neck, Slip-On and Threaded B16.47, Ser. A. ASME B16.5 Flanges
Class 300,, Slip-On and Threaded B16.47, Ser. A ASME B16.5 Flanges Weld, Slip-On, Socket Weld, Threaded, Lap Joint, Blind. 1/2" - 24" Class 150, 300, 400, 600, 900, 1500 and 2500 NOTE: Reducing flanges
Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable
Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable
Section 2. Shurjoint Grooved Fittings Flow Data / Friction Resistance Ductile Iron Grooved Fittings. Wrought Grooved Fittings
Section 2 Cast & Wrought Grooved Fittings Shurjoint Grooved Fittings... 56 Flow Data / Friction Resistance... 56 Ductile Iron Grooved Fittings 7110 / 7111 / 7112 / 7113 Elbows... 57 7120 / 7135 / 7130
Forged High Pressure Pipe Fittings
Forged High Pressure Pipe Fittings Forged High Pressure Pipe Fittings Pressure Class Socket Weld Forged Fittings Products Dimension Specifications Pressure Class Threaded Forged Fittings Products Dimension
Long Welding Neck Flanges Catalogue
Hydraulic & Offshore Supplies Long Welding Neck Flanges Catalogue YOUR GATEWAY TO GLOBAL SUPPLY HOSE ASSEMBLIES PRESSURE TESTING WALFORM EQUIPMENT PACKAGES FLANGES PIPE & TUBE LONG WELDING NECK FLANGES
FIG Gruvlok Flanges
Gruvlok Flanges The Gruvlok Fig. 7012 Flange allows direct connection of Class 125 or Class 150 flanged components to a grooved piping system. The two interlocking halves of the 2" thru 12" sizes of the
Couplings. Ductile Iron Housing Specifications. Coatings. Gasket Specifications. Bolt/Nut Specifications
Figure 71 Flange Adapters (ANSI Class 5/150) The Figure 71 Flange Adapter is capable of pressures up to 300 psi (20,7 bar) depending on pipe size and wall thickness. It provides a direct transition from
Forged steel socket Welding fittings 6 ~ 13. Forged steel threaded fittings 14 ~ 20. Forged steel outlet fittings 21 ~ 23
Forged steel socket Welding fittings 6 ~ 13 Forged steel threaded fittings 14 ~ 20 Forged steel outlet fittings 21 ~ 23 Standard threads specifications 24 ~ 25 Comparison of astm specifications and similar
Forged Fittings. High Technology Valve & Fitting Series
Forged Fittings High Technology Valve & Fitting Series Forged steel socket Welding fittings 6 ~ 13 Forged steel threaded fittings 14 ~ 20 Forged steel outlet fittings 21 ~ 23 Standard threads specifications
Forged steel socket Welding fittings 6 ~ 13. Forged steel threaded fittings 14 ~ 20. Forged steel outlet fittings 21 ~ 23
Forged steel socket Welding fittings 6 ~ 13 Forged steel threaded fittings 14 ~ 20 Forged steel outlet fittings 21 ~ 23 Standard threads specifications 24 ~ 25 Comparison of astm specifications and similar
5/27/12. LOKRING TECHNOLOGY, LLC APOLLO PARKWAY WILLOUGHBY OHIO TEL.: (440) FAX: (440)
5/27/12 Technical Bulletin- New Product Introduction Lokring Technology announces the release of new 333 fittings for use in low temperature carbon steel (LTCS) and sour service (H 2 S) fluid piping systems.
SUB-FHP AC GEARMOTORS PARALLEL SHAFT GEARMOTORS
SUB-FHP AC GEARMOTORS PARALLEL SHAFT GEARMOTORS 12-100 In-Lbs Single phase gearmotors, totally enclosed for continuous duty, general purpose applications. Permanent TEFC split capacitor designs are rated
Ford Brass Saddles Style 101B and 202B
101B Ford Brass Saddles 101B and 202B 101B, 3/4" and 1" Taps 202B, 3/4" through 2" Taps Specifications Body - 85-5-5-5 brass alloy as per ASTM B62, ASTM B584 and AW WA C800. Threads may be FIP, AW WA,
Cable Supports. Requirements for Cable Supports in the National Electrical Code reads as follows:
QA1 General Information are used to support cables in vertical raceways or risers. Cable supports relieve the strain that would be placed on terminations, the interior of panels, or other devices to which
Model-1 Natural Gas Valves
Flanged End 285 Screwed Weld End Locking Devices KEROTEST Model-1 s Short Weld End Long Weld End Weld x Flange 500 / 740 Flanged End 500 / 740 Weld x Flange 285 Model-1 Short Weld End Standard Welding
Overview... I2 Conduit Products Rigid Steel Conduit Elbows... I3 E.M.T. (Thinwall) Conduit Elbows 45 and I3 Galvanized Rigid Conduit Special
Overview................................ 2 Conduit Products Rigid Steel Conduit Elbows................. 3 E.M.T. (Thinwall) Conduit Elbows 45 and 90............................. 3 Galvanized Rigid Conduit
Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 48 /1200 in a variety of straight and reducing styles. Most standard fittings are cast of durable
Presby Steel, LLC. 143 East Milan Road Berlin, NH FAX:
143 East Milan Road 603-752-3022 FAX: 603-752-2821 1 S BEAMS (I Beams) Conforms to ASTM A36 Designation Web Depth/Inches Thickness Flange in Inches Area x Wt./Ft./Lbs. in Inches Width Thickness Sq. In.
Quality, durability and efficiency for every electrical installation
EMT & CONDUIT EMT & CONDUIT Quality, durability and efficiency for every electrical installation Since 1931, Wheatland Tube has manufactured high-quality electrical conduit that meets your needs, deadlines
030/TL 03/01 50M, Copyright 2001, Anvil International $3. 50
030/TL 03/01 50M, Copyright 2001, Anvil International $3. 50 Pipe Fitter Handbook Another Anvil Advantage Mini-catalog Installation Procedures Technical Data Copyright 2001 by Anvil International, Inc.
BA-350 Series (Medical Gas Service) 3-Piece Bronze Ball Valve With Extended Copper-Tube Ends
BA-350 Series (Medical Gas Service) 3-Piece Bronze Ball Valve With Extended Copper-Tube Ends 3-Piece, Full-Port, Bronze Ball Valve Extended-Tube Ends Ideal for use in medical gas systems, pharmaceutical
Bore (B) Pitch Diam. Drilling Template Flanges (1) Diam of Diam of. Groove. Neck D X G A Raised Face Raised Face P Raised face
Class 300 Orifice s Pipe size Thickness of Depth of jack Jack screw s (1) screw slot size & of and raised face Hub Bevel threaded Length of of Stud stud bolts Face face face bolt circle Bolts Bolts Bolt
GRUVLOK FITTINGS FOR GROOVED-END PIPE
GRUVLOK FITTINGS FOR GROOVED-END PIPE Gruvlok fittings are available through 24" nominal pipe size in a variety of styles. Use the Fitting Table to convert nominal pipe size to corresponding pipe These
ALUMINUM DISTRIBUTING, INC S.W. 2nd Ave. Ft. Lauderdale, FL Table of Contents
Table of Contents Page 2.........Equal & Unequal Angle Structural & Architectural Page 3.......................Flat Bar Structural Page 4.....................Flat Bar Architectural Page 5..... U Channel,
Steel Fabricated Coupling
Steel Fabricated Coupling Straight Connection IMPORTANT LINKS Click appropriate words to go to: Standard Limited Warranty Sales Terms & Conditions Freight Policy Returns Policy Corrosion & Product Selection
Section 7. Socket Weld and Threaded Fittings. Socket Weld and Threaded Fittings 7-1
Section 7 Socket Weld and Threaded Fittings This Section contains dimension and tolerance information extracted from American and British specifications applicable to socket weld and threaded fittings.
Plumbing. Controls, Drains, Piping, Flanges, Couplings, Caps and Plugs
Plumbing Hale offers a wide variety of plumbing components to make the pump installation and operation easier for the OEM and End User. Hale controls allow for a clean and compact pump panel. Controls
Ground Wire Size. 1/2 in /4 in. 2 in /2 in. 3-1/2 in TB. 4 in. 5 in. #4 4/0 AWG 3906-TB
lamps Waterpipe Ground lamps Waterpipe Ground lamps Waterpipe Ground lamps 2-T Ground Wire Size Water Pipe Size 1/2 in., 3/4 in., 1 or rebar 4-10 3-T 1-1/4 in., 1-1/2 in. or 2 in. #6, #4, #2 WG 4 2-1/2
PARTS BOOK TRIPLEX MUD PUMP WS-1300T
PARTS BOOK TRIPLEX MUD PUMP WS-1300T White Star Pump Co. 22718 Commercial Lane, Tomball, Texas 77375 2010 For parts and service contact White Star sales office 22718 Commercial Lane, Tomball, Texas 77375
Product Submittals for Project
Product Submittals for Project May 011-1 Couplings Figure 577 Light Weight Rigid Coupling For Fire Protection Pressure Rating and Listing / Approval information contact Tyco Fire Suppression & Building
Ford Service Saddles and Tapping Sleeves
DQS Inc. Section AA 09/2017 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001:2015 10004466 Ford Service Saddles and Tapping Sleeves Contents Recommended Product Application *Steel *C900/909*** Cast
Form 35 Malleable Iron Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.
NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections
Wheatland Tube Company
Rigid Steel Conduit Hot-Dip Galvanized Rigid Nipples Elbows Couplings Running Thread Electrical Metallic Tubing (EMT) Elbows Rigid Aluminum Conduit Nipples Elbows Couplings Intermediate Metal Conduit (IMC)
Calle Quilla 140 Urb. San Juan Bautista de Villa, Chorrillos, Lima 09-Perú T (511) / /
REPORT BY: Taylor, Angela 29 MAY 2014 Page: 1 OF 3 PART DESCRIPTION PART NUMBER: DRAWING NO: 1283541 PUMP ASSEMBLY; L0918BCD GI, LH, W/1 1/2 DU500014241 REVISION: L NPT X 1 NPT FLUID END, CARBOX. NITRILE
Quicklub Lubrication Systems Fittings, Adapters and Accessories
Divider Valve Mounting Accessories 246416 Valve mounting bracket 51304 ¼" nylon locknut for valve mounting 247023 Grade 8, ¼" valve mounting bolt 239499 Template for divider valve mounting (6, 8, 10 and
MODEL B ELECTRIC HYDRAULIC PUMP TOP VIEW
Form No. 0495 SPX Corporation 55 th Street Rockford, IL 09-399 USA Internet Address: http://www.hytec.com Tech. Services: (00) 4-3 Fax: (00) 5-3 Order Entry: (00) 54-4 Fax: (00) -03 Parts List for: 009
EC&N. Elbows, Couplings & Nipples
EC&N Elbows, Couplings & Nipples ELBOWS, COUPLINGS & NIPPLES Superior physical protection for electrical conductors Established in 1877, Wheatland Tube is the only conduit manufacturer that also produces
VALVES SHOP.CHEMOILPRODUCTS.COM SHOP.CHEMOILPRODUCTS.
VALVES FITTINGS & STAINLESS STEEL BALL VALVES CAMLOCKS SPECIFICATIONS: ALUMINUM, SS, BRASS, & D. I. GRAVITY CASTING A-A-59326 STANDARDS NBR SEAT MATERIAL 50 PSI TO 250 PSI SIZE 3/4 TO 8 TYPE B F COUPLER
Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints 1
Designation: A 865 97 AMERICAN SOCIETY FOR TESTING AND MATERIALS 00 Barr Harbor Dr., est Conshohocken, PA 9428 Reprinted from the Annual Book of ASTM Standards. Copyright ASTM Standard Specification for
Customer Service : Tel Toll-free Fax
Table Of Contents Terms and Engineering Data...2 Lead-Free Brass Ball Valves...3-4 TFP600-LF Full port, 2-piece body, lead-free, Threaded Ends...3 SFP600-LF Full port, 2-piece body, lead-free, Solder Ends...4
Product Specification Guide Expansion and Deflection Couplings. SECTION Raceway and Boxes for Electrical Systems
Product Specification Guide Expansion and Deflection Couplings SECTION 26 05 33 Raceway and Boxes for Electrical Systems Specifier Notes: Delete any information below in Parts 1, 2 or 3 which is not required
UNITED BRAND FITTINGS
FLANGE DETAILS Class 5 S ize O.D. B.C. T Bolt Hole Bolt Dia. & of Dia. Length Bolts 4.75 5/ 8 4 x 4 50 4 x 4 3 4 4 x 4 4 00 5/ 4 x 3 8 5.00 50 5/ 7/ 8 4 x 3 8 6.00 50 7/ 8 4 x 3 8 8 3.50.75 8 7/ 8 4 x
Section 8 AMERICAN. Flanged Pipe
Section 8 AMERICAN Flanged Pipe The principal standards covering Flanged Pipe are ANSI/AWWA C115/A21.15 and ANSI/AWWA C110/A21.10. These and other standards are referenced throughout this Section either
Hole-cutting. cutting a hole. After the hole has been cut all rough edges must be removed and the area within 5/8 (16mm) of the hole
Mechanical Tees Hole-cutting Shurjoint mechanical tees provide a fast and easy mid-point branch outlet, eliminating the need for welding or the use of multiple fittings. The Model M21 features a female
ASME 350 BAR SAE 690 BAR
GENERAL HYDRAULIC PIPES 10-40 BAR SAE 50 BAR SAE 3000 PSI SAE 6000 PSI DIN 350-400 BAR SCHEDULE SERIE SAE 3000 PSI 1 SAE 6000 PSI ASME 350 BAR Product Page GS-ASME s 350 bar 203 SAE 690 bar - Grooving
Ford Service Saddles and Tapping Sleeves
Section AA 04/2013; web revision 02/2014 Ford Service Saddles and Tapping Sleeves The Ford Meter Box Company, Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 260-563-3171
Lubrication Installation Components, Accessories & Fittings Table of Contents
Lubrication Installation Components, Accessories & Fittings Table of Contents Lubrication Fittings & Accessories: Introduction............................................. 2 Threaded Fittings........................................
ACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES
ACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES 8 VALVE FITTING PART NUMBERS 2" & 3" PRESSURE REDUCING VALVES* 10645 8970-002 (9526-006) 1/4" tube (9526-006) Flow 8970-001 (9526-001) 8970-010 (9526-010)
MODEL B ELECTRIC HYDRAULIC PUMP
SPX Corporation 5885 11th Street Rockford, IL 61109-3699 USA Internet Address: http://www.powerteam.com Tech. Services: (800) 477-8326 Fax: (800) 765-8326 Order Entry: (800) 541-1418 Fax: (800) 288-7031
Cable Connectors & Conduit Sealing Bushings
RA1 Cable Terminators General Information Purpose: Cable Terminators and Sealing Fittings are used on conduit ends and cable ends to effectively seal the cable and conduit. Where Installed: Wherever the
88A-100 Series. Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 STANDARDS COMPLIANCE STANDARD FEATURES
Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108 Type 1215 Chrome Plated 9. Gland Plate 302 or 304 SS 10. Stem Nut 316 SS 11.
The applicable material specifications for ductile iron and rubber gaskets apply:
72 COUPLINGS - Grinnell Copper Grooved System is designed for joining copper tube size components 2" to 8" (54,0mm to 206,4mm) type K, L, M and DWV. All couplings and fittings are rated for working pressures
Product Information Guide
Product Information Guide Electrical Conduit Fittings Interior & Exterior Coatings Phone: 281-405-8240 Fax: 281-405-8388 Email: Sales@nec-inc.com www.nec-inc.com Service - Quality Nipples, Elbows and Couplings,
Tank and Cylinder Fittings
Tank and Cylinder Fittings THE PHOENIX FORGE GROUP Commanding a Higher Standard PFC511 R1 SM THE PHOENIX FORGE GROUP Commanding a Higher Standard SM CAPITOL MANUFACTURING COMPANY* Crowley, LA CAPPRODUCTS
Form 85 Unilets Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum, IMC, and EMT Conduit.
For use with Rigid Steel, Rigid Aluminum, IMC, and EMT Conduit. NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing.
Notes: Figure 20- (Common Parts) Electrical Dia. Files Jw 103
Notes: Figure 20- (Common Parts) Electrical Dia. Files Jw 103 1 CHASSIS, CHANNEL, MAIN, ST, PAINTED, OIL FIRED 1 JD8000 2ASSY SEE FIG 1-8 BLOWER, AIR, ASSY, 6" OD X 4" W X 1/2" SHAFT 1 JB2000 3ASSY SEE
A GUIDE TO PIPE SIZES
A GUIDE TO PIPE SIZES Pipe Strengths To identify the dimensions and strengths of different pipe, it is common to use schedule terminology taken from the ANSI pipe schedule chart. The pipe schedule chart
' ' ' ' LISTED Elbows Tees Crosses Wyes Reducers Flanges Converters Gaskets Nuts&Bolts
.., I.,.,... I I...... I I ',,,, ", Elbows Tees Crosses Wyes Reducers Flanges Converters Gaskets Nuts&Bolts ' ; i ',,.) I ' ' ' ' AWWA C Class 50 (3"' ANSI B. Class 5 ("' ANSI B. Class 50 (3"' c@us LISTED
UNITED BRAND FITTINGS
UNITED BRAND FITTINGS ANSI B. Class 5 ( ~ ) AWWA C Class 0 (3 ~ ) Our dedication to the mechanical piping industry has given us the opportunity to provide you with a quality comprehensive line of flanged
1008 thru 3030 sizes. C Hub Dia. Short No. Std. Hex Capacity. Key u. F Wrench D Steel Qty. Size Install.
TAPER-LOCK ings - Dimensions PT6-3 1008 thru 3030 sizes DIMENSIONS FOR 1008 THRU 3030 TAPER-LOCK BUSHINGS RATINGS (Lb-in) C Hub Dia. F L M Wrench Torque A B D Std. Short Short No. Torque CL 30 Std. Hex
CAST IRON FITTINGS STANDARD
060-1 CAST IRON FITTINGS STANDARD ITEM 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 90 ELL 11.03 15.95 6.99 7.29 8.62 12.24 16.93 26.45 90 REDUCING ELL * 22.20 14.69 12.27 15.44 31.19 41.74 45 ELL 13.59 14.60
Forged Steel Fittings CLASS 3000 THREADED
Forged Steel Fittings CLASS 3000 THREADED NPS 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4 DN 6 8 10 15 20 25 32 40 50 65 80 100 90 0 ELBOWS A in 0.97* 0.97 1.12 1.31 1.50 1.75 2.00 2.38 2.50 3.25 3.75
03/02/16 TECH DATA SHEET Pipe Nipples
03/02/16 TECH DATA SHEET 20569 Pipe Nipples 2 Pipe Nipples 01 Company Profile Jinan Meide Casting Co. Ltd. was established in 1962. In the past decades, Jinan Meide has seized each opportunity to consolidate
COMMERCIAL AND INDUSTRIAL FITTINGS: CONDUIT BODIES. Applications
Class I, Division per NEC 50.0(B)() Applications Larger body size facilitates pulling of large and heavy conductors. Specially designed raised cast covers provide additional wiring area. Mogul Unilets
37/38 Pneumatic Spring Diaphragm Actuator
GE Oil & Gas Technical Specifications 05/2013 Masoneilan* Valves 37/38 Pneumatic Spring Diaphragm The 37/38 Series actuator is designed to provide high performance, reliability and long service life. Features
Cast Steel Bolted Cover Swing Check Valves Sizes: 2 thru 24 Pressure Class: 150 thru 1500
Cast Steel olted Cover Swing Check Valves s: 2 thru 24 Pressure Class: 150 thru 1500 Manufactured by Newmans 33 Newco Cast Carbon Steel olted onnet Valves Typical Newco Cast Steel olted Cover Swing Check
Direct Mount Packages
800.783.7836 Direct Mount Packages BEV9 Actuated package Size range: 1/ - Pressure rated for 1000 WOG 316 Stainless steel construction Live loaded stem seal design Full Port Threaded Ends (F) EZ99 Actuated
Quicklub Lubrication Systems Fittings, Adapters and Accessories
Divider Valve Mounting Accessories 24646 Valve mounting bracket 5304 4" nylon locknut for valve mounting 247023 Grade 8, 4" valve mounting bolt 239499 Template for divider valve mounting (6, 8, 0 and 2
AGRIMETAL ASSEMBLY CASING ASSEMBLY : CREATION : REVISION : AUTHOR : S.B. Page 1 de 15
PARTS LIST BW 00 --00 # PART # Qty TITLE -0-000 BLOWER CASING (B.W.00 POINTS) NC-6-00 BUSHING 0.80'' ID X.0'' OD X 0.60'' --00 SERIAL NUMBER PLATE ASSEMBLY CASING ASSEMBLY : --00 CREATION : 06-06- REVISION
PARTS LIST BW 3500 TP
PARTS LIST BW 500 TP -57-000 # PART # Qty TITLE NC7--00 BUSHING 0.80'' ID X.0'' OD X 0.0'' 5-55-070 SERIAL NUMBER PLATE CREATION : 5-0-0 REVISION : 9-09-08 ASSEMBLY CASING ASSEMBLY : -57-000 AUTHOR : Page
AccuTru Thermowells. Dedicated to those organizations that value improved temperature measurement for critical processes
S E N S O R T E C H N O L O G I E S AccuTru Thermowells Dedicated to those organizations that value improved temperature measurement for critical processes Section 5 Index Thermowells Model Page PT-1
Mobile Cylinder Div. Standard Build Series. Catalog HY /US Rev C
Mobile Cylinder Div. Standard Build Series Catalog HY18-0014/US Rev C WARNING - USER RESPONSIBILITY FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE
Specification Grade Insulated Bushings...DA1 Specification Grade Insulated Grounding Bushings...DA2-DA4. Insulating Bushings & Couplings...
SECTION D INDEX Product Description Page Number Specification Grade Insulated Bushings.....................DA Specification Grade Insulated Grounding Bushings........DA2-DA4 Insulating Bushings & Couplings.......................DA-DA6
QUICK SELECTION GUIDE
SELECTION GUIDE SAE HYDRAULIC 4-BOLT AND SPLIT FLANGED FITTINGS IN CARBON STEEL AND STAINLESS STEEL ISO 14001 Registered Environmental Management ISO 9001 Registered Quality Management OHSAS 18001 Registered
HVAC Products 2016 EDITION NCI CANADA INC.
HVAC Products 2016 EDITION NCI CANADA INC. YOUR SINGLE SOURCE SOLUTION NCI Canada Inc. is a Canadian National master distributor of high quality valves, fittings, pipes and related products serving residential,
55-Gallon Powder Drum Truck
Instruction Sheet P/N 0 0 -Gallon Powder Drum Truck for Bulk-Feed Powder Transfer Systems Description See Figure. The -gallon powder drum truck automatically adds bulk powder to a powder coating system
GROOVED COUPLINGS - STANDARD FLEXIBLE Model 101
GROOVED COUPLINGS - STANDARD FLEXIBLE Model 101 Available Sizes 1" through 12" (25 through ) Pipe Material Carbon steel, Schedule 10, Schedule 40. For use with alternative materials and wall thicknesses
1 CHASSIS, CHANNEL, MAIN, ST, PAINTED, OIL FIRED 1 JD8000 2ASSY SEE FIG 1-7 BLOWER, AIR, ASSY, 6" OD X 4" W X 1/2" SHAFT 1 JB2000 3ASSY SEE FIG 1-1
1 CHASSIS, CHANNEL, MAIN, ST, PAINTED, OIL FIRED 1 JD8000 2ASSY SEE FIG 1-7 BLOWER, AIR, ASSY, 6" OD X 4" W X 1/2" SHAFT 1 JB2000 3ASSY SEE FIG 1-1 BURNER, GUN, OIL, DOUBLE, ELECTRODE 1 JB1000 4 TANK,
Cable Connectors & Conduit Sealing Bushings
RA1 Cable Terminators General Information Purpose: Cable Terminators and Sealing Fittings are used on conduit ends and cable ends to effectively seal the cable and conduit. Where Installed: Wherever the
Conduit Outlet Boxes and Bodies: Malleable Iron or Aluminum; Explosionproof, Dust-Ignitionproof UNILETS for use with Threaded Metal Conduit.
-2 Conduit Outlet Boxes and Bodies: Malleable Iron or Aluminum; UNILETS for use with Threaded Metal Conduit. Applications Meet a wide range of classified area requirements. Corrosion-resistant ideal indoors
RP-1350 Rev. 1. Parts List. Model 441-S Regulator. Parts List. Copyright 1999 Invensys Energy Metering
RP-1350 Rev. 1 Model 441-S Regulator Parts List Model 441-S Regulator Parts List Copyright 1999 Invensys Energy Metering DIAPHRAGM SIZE Nominal Inside Diameter A 7" Diaphragm 9 3 /4" 10" Diaphragm 13 1
Grooved Piping System for Fire Protection Services
Grooved Piping System for Fire Protection Services 1.01 General: A. Section Includes: 1. General 2. Materials: a. Pipe b. Victaulic Couplings c. Victaulic Fittings d. Hole and Branch Outlets e. Victaulic
Armoured Cable/Flex. Conduit
Armoured Cable/Flex. Conduit Connectors Fittings & Accessories Grounding Trade Clamping Range Suggested Application Flex. Cat. No. Size min. max. AC90 (BX) Conduit CI70 CI71 / CI73 CI2210 / CI2236 L-16
Easy to assemble Available with long or short nut in wide range of styles and sizes 651 MALE ELBOW 5/16 O.D. TUBE 1/8 PIPE MALE CONNECTOR
A29-1 TM CIC 200 BRASS COMPRESSION TUBE FITTINGS ASSORTMENT P/N 7745 Medium pressure air, oil, water and natural gas applications Manufactured from high density brass alloy No flaring or soldering required
DRAIN MASTER DSS-8000 DSS-8000-Q
5 8 Encore Premium Drain Master World s Greatest Drain NSF Listed, CSA and ANSI Certified 4 2 DRAIN MASTER DSS-8000 DSS-8000-Q 9 3 1 Overflow Assembly Optional 1-5/8 (41mm) 7 6 1. Solid stainless steel
Copper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10)
Offshore OSNA -10 Copper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10) KME Germany GmbH & Co. KG Offshore OSNA -10 [GB] Content KME - The Company 1 The Material 2 Offshore Product Range 3 Pipes