37 flare couplings to ISO
|
|
- Harry Fleming
- 5 years ago
- Views:
Transcription
1
2 Applications Widely used throughout the world, 37 flare couplings are designed for most medium pressure mobile and stationary applications. These couplings are characterized by easy, compact assembly and are perfectly suited for series assembly or maintenance use. Principle flare couplings to ISO comprise a body (1), pressure sleeve (2) and securing nut (3). By exchanging the pressure sleeve, the same coupling can be used with both metric and inch size tube flared at less than 37. Once assembled, the flared tube (4) is wedged and held between the pressure ring and the coupling body. The pressure sleeve centres and supports the tube, at the same time preventing it from twisting and dampening vibration. Since the tube does not turn with the securing nut, no tension is transmitted to the tube system. The result is an extremely reliable metal seal. Coupling body Tube Flare sleeve Nut Technical specifications o.d. tube mm o.d. tube inch , 15, 16 18, , /4 5/16 3/8 1/2 5/8 3/4 1 11/4 11/2 U UN/UNF-2A ANSI B1.1 (ISO 725) 7/16-20 UNF 1/2-20 UNF 9/16-20 UNF 3/4-20 UNF 7/8-14 UNF 11/16-12 UN 15/16-12 UN 15/8-12 UN 17/8-12 UN D ±0,08 i ±0,4 4,9 6,48 8,08 10,82 13,69 16,87 23,19 29,13 35, ,1 16,7 19,3 21,9 23,1 24,3 27,5
3 All products in the 37 flare couplings range are supplied as body only: Principal advantages Extensive applications : metal/metal sealing ensures good fluid flow and connection capability across a wide range of working temperatures. Secure sealing : 37 flare couplings have only sealing one point between the coupling body and the flared tube. Maximum safety, thanks to the 37 flare : all parts are mechanically in contact with each other, eliminating the risk of the tube pulling out. Easy use : the low tightening torques of these couplings makes assembly very straightforward and the ease of disassembly simplifies maintenance. 143 Double use : for both metric and inch tubes with 37 flare. High resistance : these couplings withstand nominal pressures up to 350 bar, dependant on the diameter. Cost savings and stock reduction : different o.d. tubes can be used with the same dimension of couplings.
4 Product offer Nuts, flare sleeves 8410 Nuts 8424 Flare sleeves Male stud couplings elastomer seals O-ring Taper Tube-tube couplings V16 8V straight couplings equal elbows equal tees equal crosses bulkhead straight couplings bulkhead elbow couplings Adjustable couplings elbows 45 elbows tees run tees Adjustable couplings with lock nut elbows tees run tees
5 Product offer Non-adjustable couplings elbows tees run tees adaptors and reducing adaptors adjustable adaptors parallel adjustable adaptors taper Straight reducing couplings pressure gauge connectors adaptors for pressure gauge connections component parts 8426 end plug 8425 socket head port plug
6 Nuts ØD mm ØD inch C UN/UNF Bell code F H 6 1/4 7/ / ,5 0, /16 1/ / , /8 9/ / ,3 0, /2 3/ / ,3 0, /8 7/ / ,6 0, /4 1 1/ / ,9 0, / / ,4 0, /4 1 5/ / , /2 1 7/ / ,8 0, Flare sleeves ØD mm ØD inch ØD mm ØD pouce Bell code mm Bell code pouce L 6 1/ / /1/4 10,4 0, / / /8 11,2 0, / / /3/8 12,7 0, / / /1/2 14,2 0, /14 16,8 0, /15 16,8 0, / / /16 16,8 0, /18 17,3 0, / / /3/4 17,3 0, / /1 19,8 0, /30 23,1 0, / / /1 1/4 23,1 0, / / /38 28,4 0,052
7 Male stud couplings BSP parallel elastomer seal ISO ØD mm ØD inch C1 C2 UN/UNF Bell code E F G L 6 1/4 G1/8 7/ /6-RD1/8 6, ,9 22,5 0, /4 G1/4 7/ /6-RD1/4 9, ,9 22,5 0, /4 G3/8 7/ /6-RD3/8 9, ,9 23,5 0, /16 G1/4 1/ /8-RD1/4 9, ,9 22,5 0, /16 G3/8 1/ /8-RD3/8 9, ,9 23,5 0, /8 G1/4 9/ /10-RD1/4 9, ,9 22,5 0, /8 G3/8 9/ /10-RD3/8 9, ,9 23,5 0, /8 G1/2 9/ /10-RD1/ ,9 25,6 0, /2 G1/4 3/ /12-RD1/4 9, ,9 26,5 0, /2 G3/8 3/ /12-RD3/8 9, ,9 26,5 0, /2 G1/2 3/ /12-RD1/ ,9 28,4 0, /2 G3/4 3/ /12-RD3/ ,9 29,4 0, /8 G3/8 7/ /16-RD3/8 9, ,9 29,5 0, /8 G1/2 7/ /16-RD1/ ,9 31 0, /8 G3/4 7/ /16-RD3/ ,9 32 0, /4 G1/2 1 1/ /20-RD1/ ,9 33,7 0, /4 G3/4 1 1/ /20-RD3/ ,9 34,5 0, /4 G1 1 1/ /20-RD ,9 36,5 0, G3/4 1 5/ /25-RD3/ ,9 35,5 0, G1 1 5/ /25-RD ,9 37,5 0, G1 1/4 1 5/ /25-RD1 1/ ,9 39 0, /4 G1 1/4 1 5/ /32-RD1 1/ ,9 41 0, /2 G1 1/4 1 7/ /38-RD1 1/ ,9 44,5 0, /2 G1 1/2 1 7/ /38-RD1 1/ ,9 45 0,
8 Male stud couplings metric parallel elastomer seal ISO ØD mm ØD inch C1 C2 UN/UNF Bell code E F G L 6 1/4 M10x1 7/ /6-MD10X ,9 21 0, /4 M12x1,5 7/ /6-MD12X1, ,9 21 0, /16 M12x1,5 1/ /8-MD12X1, ,9 21 0, /8 M14x1,5 9/ /10-MD14X1, ,9 21 0, /8 M16x1,5 9/ /10-MD16X1, ,9 22 0, /2 M16x1,5 3/ /12-MD16X1, ,9 24,5 0, /2 M18x1,5 3/ /12-MD18X1, ,9 26 0, /8 M18x1,5 7/ /16-MD18X1, ,9 28 0, /8 M22x1,5 7/ /16-MD22X1, ,9 29,5 0, /4 M22x1,5 1 1/ /20-MD22X1, ,9 32 0, /4 M27x2 1 1/ /20-MD27X ,9 32,5 0, M33x2 1 5/ /25-MD33X ,9 34,5 0, /4 M42x2 1 5/ /32-MD42X ,9 38 0, /2 M48x2 1 7/ /38-MD48X ,9 41,5 0,920 Body only Metric thread: M16x1,5 Identification of Legris part numbers Example of product codes o.d. tube: 8 mm
9 Male stud couplings UN, UNF O-ring ISO /3 ØD mm ØD inch C1 C2 UN/UNF Bell code E F L 6 1/4 7/ / /6-7/16-20UNF , /4 1/2-20 7/ /6-1/2-20UNF , /16 1/2-20 1/ /8-1/2-20UNF , /8 9/ / /10-9/16-18UNF ,1 0, /8 3/4-16 9/ /10-3/4-16UNF ,1 0, /2 3/4-16 3/ /12-3/4-16UNF ,5 0, /2 7/8-14 3/ /12-7/8-14UNF 12, ,9 0, /2 1 1/ / /12-1 1/16-12UN ,7 0, /8 3/4-16 7/ /16-3/4-16UNF ,5 0, /8 7/8-14 7/ /16-7/8-14UNF 12, ,5 0, /8 1 1/ / /16-1 1/16-12UN , /4 3/ / /20-3/4-16UNF , /4 7/ / /20-7/8-14UNF 12, ,7 0, /4 1 1/ / /20-1 1/16-12UN , /4 1 5/16-12* 1 1/ /20-1 5/16-12UN 15 41* 35,7 0, / / /25-1 1/16-12UN , /16-12* 1 5/ /25-1 5/16-12UN 15 41* 36,7 0, / / /25-1 5/8-12UN ,7 0, /4 1 5/ / /32-1 5/8-12UN , /2 1 7/ / /38-1 7/8-12UN ,920 * With shoulder Ø 38,2 149
10 Male stud couplings BSPT ISO ØD mm ØD inch C1 C2 UN/UNF Bell code E F L 6 1/4 R1/8 7/ /6-RK1/8 9, ,7 0, /4 R1/4 7/ /6-RK1/4 14, ,7 0, /16 R1/8 1/ /8-RK1/8 9, ,7 0, /16 R1/4 1/ /8-RK1/4 14, ,3 0, /8 R1/4 9/ /10-RK1/4 14, ,6 0, /8 R3/8 9/ /10-RK3/8 14, ,6 0, /8 R1/2 9/ /10-RK1/ ,1 0, /2 R1/4 3/ /12-RK1/4 14, ,1 0, /2 R3/8 3/ /12-RK3/8 14, ,1 0, /2 R1/2 3/ /12-RK1/ ,7 0, /8 R3/8 7/ /16-RK3/8 14, ,9 0, /8 R1/2 7/ /16-RK1/ ,7 0, /8 R3/4 7/ /16-RK3/ ,3 0, /4 R1/2 1 1/ /20-RK1/ ,8 0, /4 R3/4 1 1/ /20-RK3/ ,8 0, R3/4 1 5/ /25-RK3/ ,1 0, R1 1 5/ /25-RK1 23, ,9 0, /4 R1 1/4 1 5/ /32-RK1 1/4 24, , /2 R1 1/2 1 7/ /38-RK1 1/2 25, ,3 0,910
11 Male stud couplings NPT ØD mm ØD inch C1 C2 UN/UNF Bell code E F L 6 1/4 1/8 7/ /6-NPT1/8 9, , /4 1/4 7/ /6-NPT1/4 15, , /16 1/8 1/ /8-NPT1/8 9, , /8 1/4 9/ /10-NPT1/4 15, ,3 0, /8 3/8 9/ /10-NPT3/8 15, ,3 0, /2 1/2 3/ /12-NPT1/2 19, ,4 0, /2 3/4 3/ /12-NPT3/4 20, , /8 3/8 7/ /16-NPT3/8 15, ,1 0, /8 1/2 7/ /16-NPT1/2 19, , /8 3/4 7/ /16-NPT3/4 20, ,5 0, /4 3/4 1 1/ /20-NPT3/4 20, ,3 0, / / /20-NPT1 25, ,1 0, / /25-NPT1 25, ,4 0, /4 1 1/4 1 5/ /32-NPT1 1/4 25, ,2 0, /2 1 1/2 1 7/ /38-NPT1 1/2 26, ,1 0, Discover it on legris.com A dynamic catalogue of the complete range - to consult and, through which, to request a quotation. A technical guide with animated presentations of product ranges. More than 3000 CAD drawings available.
12 Straight couplings ØD mm ØD inch C UN/UNF Bell code F L 6 1/4 7/ / ,8 0, /16 1/ / ,8 0, /8 9/ / ,8 0, /2 3/ / ,1 0, /8 7/ / ,8 0, /4 1 1/ / ,9 0, / / ,2 0, /4 1 5/ / ,7 0, /2 1 7/ / ,8 1,
13 Equal elbows ØD mm ØD inch C UN/UNF Bell code F L 6 1/4 7/ / ,6 0, /16 1/ / ,1 0, /8 9/ / ,9 0, /2 3/ / ,8 0, /8 7/ / ,8 0, /4 1 1/ / ,2 0, / / , /4 1 5/ / ,3 1, /2 1 7/ / ,2 1, Equal tees ØD mm ØD inch C UN/UNF Bell code F L 6 1/4 7/ / ,6 0, /16 1/ / ,1 0, /8 9/ / ,9 0, /2 3/ / ,8 0, /8 7/ / ,8 0, /4 1 1/ / ,2 0, / / , /4 1 5/ / ,3 1, /2 1 7/ / ,2 2,340
14 Equal crosses ØD mm ØD inch C UN/UNF Bell code F L 6 1/4 7/ / ,6 0, /16 1/ / ,1 0, /8 9/ / ,9 0, /2 3/ / ,8 0, /8 7/ / ,8 0, /4 1 1/ / ,2 0, / / , /4 1 5/ / ,3 1, /2 1 7/ / ,2 3,
15 Bulkhead straight couplings ØD mm ØD inch C UN/UNF Bell code F1 F2 L1 L2 6 1/4 7/ V /6-KM ,3 21,3 0, /16 1/2-20 8V /8-KM ,3 21,3 0, /8 9/ V /10-KM ,3 22,1 0, /2 3/4-16 8V /12-KM ,4 24,6 0, /8 7/8-14 8V /16-KM ,9 28,7 0, /4 1 1/ V /20-KM ,2 33,3 0, / V /25-KM ,2 34,6 0, /4 1 5/8-12 8V /32-KM ,5 37,6 1, /2 1 7/8-12 8V /38-KM ,8 42,6 1, Bulkhead elbow couplings ØD mm ØD inch C UN/UNF Bell code F1 F2 L1 L2 L3 6 1/4 7/ V /1-220/6-KM ,6 12,1 28,3 0, /16 1/2-20 8V /1-220/8-KM ,2 12,8 28,3 0, /8 9/ V /1-220/10-KM ,7 15,9 30,1 0, /2 3/4-16 8V /1-220/12-KM ,5 18,6 35 0, /8 7/8-14 8V /1-220/16-KM ,6 22,2 38,5 0, /4 1 1/ V /1-220/20-KM , ,8 0, / V /1-220/25-KM ,3 28,3 42,8 0, /4 1 5/8-12 8V /1-220/32-KM ,1 35,1 44,1 1, /2 1 7/8-12 8V /1-220/38-KM ,4 42,6 44,3 1,980
16 Standpipe elbows ØD mm ØD inch C UN/UNF Bell code F1 F2 L1 L2 6 1/4 7/ /1-290/6V ,6 25,4 0, /16 1/ /1-290/8V ,1 26,9 0, /8 9/ /1-290/10V ,9 31,8 0, /2 3/ /1-290/12V ,8 35,1 0, /8 7/ /1-290/16V ,8 41,1 0, /4 1 1/ /1-290/20V ,2 44,4 0, / /1-290/25V ,8 0, /4 1 5/ /1-290/32V ,3 58,7 0, /2 1 7/ /1-290/38V ,2 65,8 1, standpipe elbows ØD mm ØD inch C UN/UNF Bell code F1 F2 L1 L2 6 1/4 7/ /7-290/6V ,5 24 0, /16 1/ /7-290/8V ,5 25,5 0, /8 9/ /7-290/10V ,5 0, /2 3/ /7-290/12V ,5 0, /8 7/ /7-290/16V ,5 0, /4 1 1/ /7-290/20V ,5 38 0, / /7-290/25V ,5 44,5 0, /4 1 5/ /7-290/32V ,5 51,5 0, /2 1 7/ /7-290/38V ,539
17 Standpipe branch tees ØD mm ØD inch C UN/UNF Bell code F1 F2 L1 L2 6 1/4 7/ /2-290/6V ,6 25,4 0, /16 1/ /2-290/8V ,1 26,9 0, /8 9/ /2-290/10V ,9 31,8 0, /2 3/ /2-290/12V ,8 35,1 0, /8 7/ /2-290/16V ,8 41,1 0, /4 1 1/ /2-290/20V ,2 44,4 0, / /2-290/25V ,8 0, /4 1 5/ /2-290/32V ,3 58,7 0, /2 1 7/ /2-290/38V ,2 65,8 1, Standpipe run tees ØD mm ØD inch C UN/UNF Bell code F1 F2 L1 L2 6 1/4 7/ /3-290/6V ,6 25,4 0, /16 1/ /3-290/8V ,1 26,9 0, /8 9/ /3-290/10V ,9 31,8 0, /2 3/ /3-290/12V ,8 35,1 0, /8 7/ /3-290/16V ,8 41,1 0, /4 1 1/ /3-290/20V ,2 44,4 0, / /3-290/25V ,8 0, /4 1 5/ /3-290/32V ,3 58,7 1, /2 1 7/ /3-290/38V ,2 61,5 2,100
18 Adjustable male stud elbows with lock nut BSP parallel O-ring and lock nut ISO ØD mm ØD inch C1 C2 UN/UNF Bell code E F1 F2 L1 L /4 G1/8 7/ /1-020/6-G1/8 6, ,6 26 0, /4 G1/4 7/ /1-020/6-G1/4 9, ,9 32 0, /16 G1/4 1/ /1-020/8-G1/4 9, ,9 33 0, /8 G1/4 9/ /1-020/10-G1/4 9, ,9 33 0, /8 G3/8 9/ /1-020/10-G3/8 9, , /2 G3/8 3/ /1-020/12-G3/8 9, ,8 37 0, /2 G1/2 3/ /1-020/12-G1/ ,7 43 0, /8 G1/2 7/ /1-020/16-G1/ ,8 43 0, /4 G1/2 1 1/ /1-020/20-G1/ ,2 49,5 0, /4 G3/4 1 1/ /1-020/20-G3/ ,2 49,5 0, G3/4 1 5/ /1-020/25-G3/ , G1 1 5/ /1-020/25-G , /4 G1 1/4 1 5/ /1-020/32-G1 1/ ,3 58 0, /2 G1 1/2 1 7/ /1-020/38-G1 1/ ,2 61,5 1,400 Adjustable male stud elbows with lock nut metric parallel O-ring and lock nut ØD mm ØD inch C1 C2 UN/UNF Bell code E F1 F2 L1 L2 6 1/4 M12x1,5 7/ /1-020/6-M12X1,5 7, , /16 M14x1,5 1/ /1-020/8-M14X1,5 8, , /8 M16x1,5 9/ /1-020/10-M16X1,5 8, , /2 M18x1,5 3/ /1-020/12-M18X1, , /8 M22x1,5 7/ /1-020/16-M22X1,5 10, , /4 M27x2 1 1/ /1-020/20-M27X ,5 0, M33x2 1 5/ /1-020/25-M33X ,556
19 Adjustable male stud elbows with lock nut UN, UNF O-ring ISO /3 ØD mm ØD inch C UN/UNF Bell code E F1 F2 L1 L2 O-ring 6 1/4 7/ /1-020/6-7/16-20UNF ,6 26,2 8,92x1,83 0, /16 1/ /1-020/8-1/2-20UNF ,1 27,7 10,52x1,83 0, /8 9/ /1-020/10-9/16-18UNF ,9 31,8 11,89x1,98 0, /2 3/ /1-020/12-3/4-16UNF ,8 36,8 16,36x2,2 0, /8 7/ /1-020/16-7/8-14UNF 12, ,8 43,2 19,18x2,46 0, /4 1 1/ /1-020/20-1 1/16-12UN ,2 49,3 23,47x2,95 0, / /1-020/25-1 5/16-12UN ,1 29,74x2,95 0, /4 1 5/ /1-020/32-1 5/8-12UN ,3 57,2 37,47x3 0, /2 1 7/ /1-020/38-1 7/8-12UN ,2 60,7 43,69x3 1,
20 Adjustable male stud branch tees with lock nut BSP parallel O-ring and lock nut ISO ØD mm ØD inch C1 C2 UN/UNF Bell code E F1 F2 L1 L2 6 1/4 G1/8 7/ /1-030/6-G1/8 6, ,6 26 0, /16 G1/4 1/ /1-030/8-G1/4 9, ,9 33 0, /8 G1/4 9/ /1-030/10-G1/4 9, ,9 33 0, /2 G3/8 3/ /1-030/12-G3/8 9, ,8 37 0, /8 G1/2 7/ /1-030/16-G1/ ,8 43 0, /4 G3/4 1 1/ /1-030/20-G3/ ,2 49,5 0, G1 1 5/ /1-030/25-G , /4 G1 1/4 1 5/ /1-030/32-G1 1/ ,3 58 1, /2 G1 1/2 1 7/ /1-030/38-G1 1/ ,2 61,5 2, Adjustable male stud branch tees with lock nut metric parallel O-ring and lock nut ØD mm ØD inch C1 C2 UN/UNF Bell code E F1 F2 L1 L2 6 1/4 M12x1,5 7/ /1-030/6-M12X1,5 7, , /16 M14x1,5 1/ /1-030/8-M14X1,5 8, , /8 M16x1,5 9/ /1-030/10-M16X1,5 8, , /2 M18x1,5 3/ /1-030/12-M18X1, , /8 M22x1,5 7/ /1-030/16-M22X1,5 10, , /4 M27x2 1 1/ /1-030/20-M27X ,5 0, M33x2 1 5/ /1-030/25-M33X ,796
21 Adjustable male stud branch tees with lock nut UN, UNF O-ring ISO /3 ØD mm ØD inch C UN/UNF Bell code E F1 F2 L1 L2 O-ring 6 1/4 7/ /1-030/6-7/16-20UNF ,6 26,2 8,92x1,83 0, /16 1/ /1-030/8-1/2-20UNF ,1 27,7 10,52x1,83 0, /8 9/ /1-030/10-9/16-18UNF ,9 31,8 11,89x1,98 0, /2 3/ /1-030/12-3/4-16UNF ,8 36,8 16,36x2,2 0, /8 7/ /1-030/16-7/8-14UNF 12, ,8 43,2 19,18x2,46 0, /4 1 1/ /1-030/20-1 1/16-12UN ,2 49,3 23,47x2,95 0, / /1-030/25-1 5/16-12UN ,1 29,74x2,95 0, /4 1 5/ /1-030/32-1 5/8-12UN ,3 57,2 37,47x3 1, /2 1 7/ /1-030/38-1 7/8-12UN ,2 60,7 43,69x3 2,
22 Adjustable male stud run tees with lock nut BSP parallel O-ring and lock nut ISO ØD mm ØD inch C1 C2 UN/UNF Bell code E F1 F2 L1 L2 6 1/4 G1/8 7/ /1-040/6-G1/8 6, ,6 26 0, /16 G1/4 1/ /1-040/8-G1/4 9, ,9 33 0, /8 G1/4 9/ /1-040/10-G1/4 9, ,9 33 0, /2 G3/8 3/ /1-040/12-G3/8 9, ,8 37 0, /8 G1/2 7/ /1-040/16-G1/ ,8 43 0, /4 G3/4 1 1/ /1-040/20-G3/ ,2 49,5 0, G1 1 5/ /1-040/25-G , /4 G1 1/4 1 5/ /1-040/32-G1 1/ ,3 58 1, /2 G1 1/2 1 7/ /1-040/38-G1 1/ ,2 61,5 2, Adjustable male stud run tees with lock nut metric parallel O-ring and lock nut ØD mm ØD inch C1 C2 UN/UNF Bell code E F1 F2 L1 L2 6 1/4 M12x1,5 7/ /1-040/6-M12X1,5 7, , /16 M14x1,5 1/ /1-040/8-M14X1,5 8, , /8 M16x1,5 9/ /1-040/10-M16X1,5 8, , /2 M18x1,5 3/ /1-040/12-M18X1, , /8 M22x1,5 7/ /1-040/16-M22X1,5 10, , /4 M27x2 1 1/ /1-040/20-M27X ,5 0, M33x2 1 5/ /1-040/25-M33X ,796
23 Adjustable male stud run tees with lock nut UN, UNF O-ring ISO /3 ØD mm ØD inch C UN/UNF Bell code E F1 F2 L1 L2 O-ring 6 1/4 7/ /1-040/6-7/16-20UNF ,6 26,2 8,92x1,83 0, /16 1/ /1-040/8-1/2-20UNF ,1 27,7 10,52x1,83 0, /8 9/ /1-040/10-9/16-18UNF ,9 31,8 11,89x1,98 0, /2 3/ /1-040/12-3/4-16UNF ,8 36,8 16,36x2,2 0, /8 7/ /1-040/16-7/8-14UNF 12, ,8 43,2 19,18x2,46 0, /4 1 1/ /1-040/20-1 1/16-12UN ,2 49,3 23,47x2,95 0, / /1-040/25-1 5/16-12UN ,1 29,74x2,95 0, /4 1 5/ /1-040/32-1 5/8-12UN ,3 57,2 37,47x3 1, /2 1 7/ /1-040/38-1 7/8-12UN ,2 60,7 43,69x3 2,
24 Male stud elbows BSPT ISO 7 ØD mm ØD inch C1 C2 UN/UNF Bell code F L1 L /4 R1/8 7/ /6-RK1/ ,6 19,8 0, /4 R1/4 7/ /6-RK1/ ,9 27,7 0, /16 R1/8 1/ /8-RK1/ ,1 19,8 0, /16 R1/4 1/ /8-RK1/ ,9 27,7 0, /8 R1/4 9/ /10-RK1/ ,9 27,7 0, /8 R3/8 9/ /10-RK3/ , /8 R1/2 9/ /10-RK1/ ,2 37,3 0, /2 R1/4 3/ /12-RK1/ ,8 31 0, /2 R3/8 3/ /12-RK3/ ,8 31 0, /2 R1/2 3/ /12-RK1/ ,7 37,3 0, /8 R3/8 7/ /16-RK3/ ,8 33 0, /8 R1/2 7/ /16-RK1/ ,8 37,3 0, /8 R3/4 7/ /16-RK3/ ,9 40,4 0, /4 R1/2 1 1/ /20-RK1/ ,2 40,4 0, /4 R3/4 1 1/ /20-RK3/ ,2 40,4 0, R3/4 1 5/ /25-RK3/ ,2 0, /4 R1 1/4 1 5/ /32-RK1 1/ ,3 60,5 0,860 Male stud elbows NPT ØD mm ØD inch C1 C2 UN/UNF Bell code F L1 L2 6 1/4 1/8 7/ /6-NPT1/ ,6 19,8 0, /16 1/8 1/ /8-NPT1/ ,1 19,8 0, /16 1/4 1/ /8-NPT1/ ,9 27,7 0, /8 1/4 9/ /10-NPT1/ ,9 27,7 0, /2 1/2 3/ /12-NPT1/ ,7 37,3 0, /8 1/2 7/ /16-NPT1/ ,8 37,3 0, /8 3/4 7/ /16-NPT3/ ,9 40,4 0, /4 3/4 1 1/ /20-NPT3/ ,2 40,4 0, /4 1 5/ /25-NPT3/ , / /25-NPT , /4 1 1/4 1 5/ /32-NPT1 1/ ,3 60,5 0,860
25 Male stud branch tees BSPT ISO 7 ØD mm ØD inch C1 C2 UN/UNF Bell code F L1 L2 6 1/4 R1/8 7/ /6-RK1/ ,6 19,8 0, /16 R1/8 1/ /8-RK1/ ,1 19,8 0, /8 R1/4 9/ /10-RK1/ ,9 27,7 0, /2 R3/8 3/ /12-RK3/ ,8 31 0, /8 R1/2 7/ /16-RK1/ ,8 37,3 0, /4 R3/4 1 1/ /20-RK3/ ,2 40,4 0, R1 1 5/ /25-RK , Male stud branch tees NPT ØD mm ØD inch C1 C2 UN/UNF Bell code F L1 L2 6 1/4 1/8 7/ /6-NPT1/ ,6 19,8 0, /16 1/8 1/ /8-NPT1/ ,1 19,8 0, /8 1/4 9/ /10-NPT1/ ,9 27,7 0, /2 3/8 3/ /12-NPT3/ ,8 31 0, /8 1/2 7/ /16-NPT1/ ,8 37,3 0, /4 3/4 1 1/ /20-NPT3/ ,2 40,4 0, / /25-NPT ,720
26 Male stud run tees BSPT ISO 7 ØD mm ØD inch C1 C2 UN/UNF Bell code F L1 L2 6 1/4 R1/8 7/ /6-RK1/ ,6 19,8 0, /16 R1/8 1/ /8-RK1/ ,1 19,8 0, /8 R1/4 9/ /10-RK1/ ,9 27,7 0, /2 R3/8 3/ /12-RK3/ ,8 31 0, /8 R1/2 7/ /16-RK1/ ,8 37,3 0, /4 R3/4 1 1/ /20-RK3/ ,2 40,4 0, R1 1 5/ /25-RK , Male stud run tees NPT ØD mm ØD inch C1 C2 UN/UNF Bell code F L1 L2 6 1/4 1/8 7/ /6-NPT1/ ,9 19,8 0, /16 1/8 1/ /8-NPT1/ ,1 19,8 0, /8 1/4 9/ /10-NPT1/ ,9 27,7 0, /2 3/8 3/ /12-NPT3/ ,8 31 0, /8 1/2 7/ /16-NPT1/ ,8 37,3 0, /4 3/4 1 1/ /20-NPT3/ ,2 40,4 0, / /25-NPT ,720
27 Adjustable male stud standpipes BSP parallel elastomer seal ISO ØD mm ØD inch C1 C2 UN/UNF Bell code E F1 F2 G L1 L2 6 1/4 G1/8 7/ /6-RD1/8 6, ,9 25,6 16,9 0, /16 G1/4 1/ /8-RD1/4 9, ,9 26,5 17 0, /8 G1/4 9/ /10-RD1/4 9, ,9 27,5 18 0, /8 G3/8 9/ /10-RD3/8 9, ,9 28,5 19 0, /2 G3/8 3/ /12-RD3/ ,9 39,5 20,5 0, /8 G1/2 7/ /16-RD1/ ,9 35,9 23,2 0, /4 G3/4 1 1/ /20-RD3/ ,9 38,3 24 0, G1 1 5/ /25-RD ,9 43,1 28 0, /4 G1 1/4 1 5/ /32-RD1 1/ ,9 48,4 32,5 0, /2 G1 1/2 1 7/ /38-RD1 1/ ,9 53,6 35 0, Adjustable male stud standpipes metric parallel elastomer seal ISO ØD mm ØD inch C1 C2 UN/UNF Bell code E F1 F2 G L1 L2 6 1/4 M10x1 7/ /6-MD10X ,9 25,2 16,5 0, /16 M12x1,5 1/ /8-MD12X1, ,9 26,5 17 0, /8 M14x1,5 9/ /10-MD14X1, , ,5 0, /2 M16x1,5 3/ /12-MD16X1, ,9 30,7 20 0, /8 M22x1,5 7/ /16-MD22X1, ,9 35,7 23 0, /4 M27x2 1 1/ /20-MD27X ,9 38,3 24 0, M33x2 1 5/ /25-MD33X ,9 43,1 28 0, /4 M42x2 1 5/ /32-MD42X ,9 48,6 32,5 0,544
28 Adjustable male stud standpipes UN, UNF O-ring ISO /3 ØD mm ØD inch C UN/UNF Bell code E F1 F2 L1 L2 O-ring 6 1/4 7/ /6-7/16-20UNF ,3 16,6 8,92x1,83 0, /16 1/ /8-1/2-20UNF ,1 16,6 10,52x1,83 0, /8 9/ /10-9/16-18UNF ,5 11,89x1,98 0, /2 3/ /12-3/4-16UNF ,2 20,5 16,36x2,2 0, /8 7/ /16-7/8-14UNF 12, ,5 22,8 19,18x2,46 0, /4 1 1/ /20-1 1/16-12UN ,6 24,3 23,47x2,95 0, /16-12* /25-1 5/16-12UN 15 41* 41 42,4 27,3 29,47x2,95 0, /4 1 5/ /32-1 5/8-12UN ,1 37,47x3 0,505 * With shoulder Ø 38,2 168
29 Adjustable male stud standpipes BSPT ISO 7 ØD mm ØD inch C1 C2 UN/UNF Bell code E F1 F2 L1 L2 6 1/4 R1/4 7/ /6-RK1/4 14, ,4 29,7 0, /16 R1/4 1/ /8-RK1/4 14, ,2 29,7 0, /8 R1/4 9/ /10-RK1/4 14, ,2 30,7 0, /2 R1/4 3/ /12-RK1/4 14, ,7 32 0, /2 R3/8 3/ /12-RK3/8 14, ,7 32 0, /8 R1/2 7/ /16-RK1/ ,3 38,6 0, /4 R1/2 1 1/ /20-RK1/ ,5 40,2 0, R1 1 5/ /25-RK1 23, ,5 48,6 0, /4 R1 1/4 1 5/ /32-RK1 1/4 24, ,9 53 0, /2 R1 1/2 1 7/ /38-RK1 1/2 25, ,6 56 0, Adjustable male stud standpipes NPT ØD mm ØD inch C1 C2 UN/UNF Bell code E F1 F2 L1 L2 6 1/4 1/4 7/ /6-NPT1/4 15, ,4 29,7 0, /16 1/4 1/ /8-NPT1/4 15, ,2 29,7 0, /8 1/4 9/ /10-NPT1/4 15, ,2 30,7 0, /2 3/8 3/ /12-NPT3/8 15, ,7 32 0, /8 1/2 7/ /16-NPT1/2 19, ,3 38,6 0, /4 1/2 1 1/ /20-NPT1/2 19, ,5 40,2 0, /4 1 5/ /25-NPT3/4 20, ,8 43,7 0, /4 1 1/4 1 5/ /32-NPT1 1/4 25, ,9 53 0, /2 1 1/2 1 7/ /38-NPT1 1/ ,2 57,6 0,664
30 Reducing couplings for tubes One piece ØD1 ØD2 ØD1 inch ØD2 inch C1 UN/UNF C2 UN/UNF Bell code F L /8 1/4 9/ / /10-6V 19 35,6 0, /2 1/4 3/4-16 7/ /12-6V 22 38,2 0, /2 5/16 3/4-16 1/ /12-8V 22 38,2 0, /2 3/8 3/4-16 9/ /12-10V 22 38,2 0, /8 3/8 7/8-14 9/ /16-10V 27 41,2 0, /4 3/8 1 1/ / /20-10V 32 42,8 0, /4 1/2 1 1/ / /20-12V 32 45,3 0, /4 5/8 1 1/ / * / ,1 0, /4 1 5/ / /25-20V 41 54,6 0,318 * one piece 170
31 Pressure gauge connectors BSP parallel ØD mm ØD inch C1 C2 UN/UNF Bell code F L 6 1/4 G1/4 7/ /6-R1/4-CU , /4 G1/2 7/ /6-R1/2-CU , /16 G1/4 1/ /8-R1/4-CU , /16 G1/2 1/ /8-R1/2-CU , /8 G1/4 9/ /10-R1/4-CU , /8 G1/2 9/ /10-R1/2-CU , /2 G1/4 3/ /12-R1/4-CU , /2 G1/2 3/ /12-R1/2-CU ,
32 Adaptors for pressure gauge connection One piece ØD mm ØD inch C1 C2 UN/UNF Bell code F L1 L2 6 1/4 G1/4 7/ * /6-R1/ , /16 G1/4 1/ * /8-R1/ , /8 G1/4 9/ * /10-R1/ , /2 G1/4 3/ * /12-R1/ , /8 G1/4 7/ * /16-R1/ , /4 G1/4 1 1/ /20-R1/ ,9 0, G1/4 1 5/ /25-R1/ ,7 0, /4 G1/4 1 5/ /32-R1/ ,1 0, /2 G1/4 1 7/ /38-R1/ ,9 0,550 * One piece 172
33 Standpipe end plug with nut ØD mm ØD inch Bell code F H L1 6 1/ / ,5 11 0, / / , / / ,3 12 0, / / ,3 14 0, / / ,6 15 0, / / ,9 16 0, / ,4 18 0, / / , / / ,8 22 0, Socket head port plug ØD mm ØD inch C1 UN/UNF Bell code F1 L2 6 1/4 7/ / ,5 0, /16 1/ / ,5 0, /8 9/ / ,5 0, /2 3/ / , /8 7/ / , /4 1 1/ / ,5 0, / / , /4 1 5/ / , /2 1 7/ / ,360
Non-return valves to ISO /DIN 2353
Non-return valves Applications egris non-return valves allow fluids to pass in one direction whilst blocking flow in the other direction. They can be used both for hydraulic circuits and for compressed
More informationstainless steel compression fittings
compression fittings principle of compression fittings egris has used its long experience of brass compression fittings to develop a range of compression fittings. These fittings are resistant to aggressive
More informationRapid push-in fittings for plastic tubes Series 1000
CATALOGUE > Release 8.5 > Rapid fittings Series 1000 Rapid push-in fittings for plastic tubes Series 1000 Tube external diameters: 5/3, 6/, 8/6, 10/8, 12/10, 15/12,5 mm Fittings threads: metric (M5, M6,
More informationOrder from MARYLAND METRICS P.O. Box 261 Owings Mills, MD USA web:
Push-In Fittings LF 3000 LF 3200: 3 mm LIQUIfit LF 300 LF 300/ LF 3900 LF 0 PARKER LEGRIS Industrial Connector Systems Products are available from: MARYLAND METRICS P.O. Box 21 Owings Mills, MD 21117 USA
More informationBrass Compression Fitting Range
Compression Fitting Range Fittings Stud Fittings 0105 BSPT Page 5-9 0105 NPT Page 5-9 0101 BSPP/Metric Page 5-10 0101..39 BSPP Page 5-10 0101 Metric Page 5-11 01 BSPP Page 5-11 0109 BSPT Page 5-12 0109
More informationLF 3800/LF 3900 Push-In Fittings Range
LF 300/LF 3900 Push-In Fittings Range Stud Fittings Straights 305 3905 BSPT Page 1-79 305 Page 1-79 301 3901 BSPP/Metric Page 1-79 321 3921 BSPT Page 1-0 321 3921 Page 1-0 331 3931 BSPP/Metric Page 1-0
More informationCompression Fittings. Brass Compression Fittings. Stainless Steel Compression Fittings. PL Nickel-Plated Brass Spigot Fittings
Compression Fittings Compression Fittings Stainless Steel Compression Fittings PL Nickel-Plated Spigot Fittings Compression Fittings Compression Fittings Compression Fittings (P. 5-5) Stainless Steel Compression
More informationfor plastic tubes CONNECTION > Series 6000 super-rapid fittings GENERAL DATA Fitting with connecting tube Sprint
> Series 6000 super-rapid fittings CATALOGUE > Release 8.8 Series 6000 super-rapid fittings for plastic tubes Sprint Tube external diameters: 3,, 5, 6, 8, 10, 12, 1, 16 mm Fittings threads: metric (M3,
More informationconnection solutions in stainless steel
connection solutions in stainless steel www.legris.com egris onnectic offers many solutions in stainless steel that are designed for excellent resistance to aggressive / corrosive environments and fluids.
More informationLF 3600 Push-In Fittings Range
LF 300 Push-In Fittings Range Stud Fittings Straights 375 BSPT Page 1-97 301 BSPP/Metric Page 1-97 31 Metric Page 1-97 31 BSPP/Metric Page 1-9 321 BSPT Page 1-9 331 BSPP/Metric Page 1-9 300 Page 1-9 Push-In
More informationPneumatics CONTENT
Pneumatics CONTENT 2 3 4 5 6 7 8 9 Fittings 453 Flexible Tube 47 Quick Release Couplings 477 Actuators 485 Solenoid & Pneumatic Valves 495 Mechanical & Manual Valves 507 Automatic Valves 57 Filters, Regulators
More informationA Complete Range of Adaptors
A Complete Range of Adaptors Adaptors 0143 Page 9-7 0144 BSPT/ Page 9-7 0152 BSPT Page 9-7 0145 Page 9-7 0158 BSPT/ Page 9-7 0117 Page 9-8 0155 Page 9-8 0164 NPT/ Page 9-8 0167 BSPT/NPT Page 9-8 0168 Page
More informationFittings threads: metric (M5), BSP (G1/8, G1/4, G3/8, G1/2, G3/4, G1), BSPT (R1/8, R1/4, R3/8, R1/2, R3/4, R1)
> Series 2000 pipe fittings Series 2000 pipe fittings Fittings threads: metric (M5), BSP (G1/8, G1/, G3/8, G1/2, G3/, G1), BSPT (R1/8, R1/, R3/8, R1/2, R3/, R1) The wide range of Camozzi pipe fittings,
More informationFittings Metal Push-To- Connect Fittings. We make things MOVE
Fittings Metal Push-To- Connect Fittings We make things MOVE Contents 3 Fittings 4 Product Features 4 Push-In Fittings 4 Features and Benefits 5 How it Works 5 Materials of Construction 5 Fluid 5 Operating
More informationSuper-rapid fittings Series X6000 in Stainless Steel 316L
> Super-rapid fittings Series X6000 Super-rapid fittings Series X6000 in Stainless Steel 316L CATALOGUE > s 2012 Tube external diameters:, 6, 8, 10, 12 mm Fittings threads: BSP (G1/8, G1/, G3/8, G1/2),
More informationFerulok Flareless Bite Type Fittings
Flareless Bite Type Fittings Flareless SAE 080101 / Flareless Flareless SAE 080601 / Flareless Flareless SAE 080102 / NPTF Flareless SAE 080120 / SAE-ORB Flareless SAE 080103 / NPTF Flareless SAE 080221
More informationMale stud fittings. Male stud elbow. Fluid... Working pressure... Vacuum level... Rated temperature...
FITTINGS Push - in fittings 431 Series Fluid... Working pressure... Vacuum level... Rated temperature... Torque... Standards... Materials... Compressed air Max. 20 bar (290 psi) 55 mm Hg vacuum (99 %)
More informationØ5 (Ø.20) S12,65 x 1,5. M16 x 1,5 * 2 Special thread: buttress thread S12,65 x 1,5. Max. Working Pressure: 400 bar / 5801 PSI Burst Pressure:
Test Hoses SMS / SS + Working Pressure up to 630 bar / 9135 PSI Technical Data for Test Hose A B (Stard Version) C D Nominal Bore () (mm) Max. Working Pressure (PN) (bar / PSI) 00 / 5801 630 / 9135 30
More informationin stainless steel 316L
> Super-rapid fittings Series X6000 Super-rapid fittings Series X6000 in stainless steel 316L Tube external diameters:, 6, 8, 10, 12 mm Fittings threads: BSP (G1/8, G1/, G3/8, G1/2), BSPT (R1/8, R1/, R3/8,
More informationLIQUIfit Push-In Fittings with Metal Adaptors
LIQUIfit Push-In Fittings with Metal Adaptors The LIQUIfit range now benefits from a range extension of metal adaptors designed for liquid transfer applications. These fittings ensure reliable and compact
More informationLF 3600 Push-In Fittings
LF 300 In order to meet your technical and environment requirements, Parker Legris designed this range of metal fittings, offering robustness, reliability and resistance to industrial fluids for the most
More informationCOUPLING CATALOGUE. Push-In, Standard, Conventional, Accessories
COUPLING CATALOGUE Push-In, Standard, Conventional, Accessories Coupling Catalogue Table of Content Push-in and Composite Building Block... 4 Standard Connectors... 12 Quick Connection Systems P5.... 16
More informationBrass Compression Fitting Range
Compression Fitting Range Fittings Stud Fittings 05 BSPT Page 5-9 05 NPT Page 5-9 01 BSPP/Metric Page 5-01..39 BSPP Page 5-01 Metric Page 5-11 0114 BSPP Page 5-11 09 BSPT Page 5-12 09 NPT Page 5-12 0199
More informationThread and Connector Identification
How to Use this Section This section is intended as an aid to identifying the most popular threads on hydraulic hose couplings and adaptors, and hydraulic equipment. BSP, Metric, American and Japanese
More informationEISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI
2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI Over 30 patents, more than 8,000 standard articles, and 2,000 customized solutions impressively
More information05. YY XX. XX. series nominal size
Balflex MicroTest Check Line Hoses, Connectors & Gauges Balflex MicroTest is the range of hoses, couplings and gauges for check lines in hydraulic or refrigeration systems. Balflex MicroTest is produced
More informationProduct warranty. Quality Policy. The Goal
About the Company SEALEXCEL (INDIA) PVT. LTD. is a fast growing manufacturing company in the field of design, development, production and marketing of high quality valves and fittings for international
More informationHOSE, TUBE & CONNECTION FITTINGS CATALOGUE. JSG Industrial Systems quality industry solutions. Fire Suppression Systems. Flow Measurement Systems
HOSE, TUBE & CONNECTION FITTINGS CATALOGUE JSG Industrial quality industry solutions Lubrication Management Material Dispensing Management Hose & Cable Management Diesel & Fluid Management Fire Suppression
More information4200/4400 ONE-PIECE NON-SKIVE COUPLINGS
4200/4400 ONE-PIECE NON-SKIVE COUPLINGS 4200/4400 couplings have been engineered to match a wide range of latest generation hose types to provide assemblies that meet the highest global standards. Ferrules
More informationLubrication Systems. Section 26
Lubrication Systems Section 26 26-1 INFORMATION - SYSTEMS The Lincoln QuickLub is an automated and centralised lubrication system that can improve productivity and extend the service life of your plant.
More information4 PUSH-IN FITTINGS / BRASS PUSH-IN FITTINGS PLUS
PUSH-IN FITTINGS / BRASS PUSH-IN FITTINGS PLUS High performance fittings, easy to be used. Strong but also compact in order to ensure the maximum assembling flexibility. Silicon free materials. In compliance
More informationFIT-2. Inch. Ø Â" to Ë" O/D tube
For simple and quick assembly of pneumatic circuits. Positive tube connection. Wide range of types available. Reliable and corrosion resistant. Specifications Fluid: Compressed air, nitrogen, inert and
More informationPneufit Inch Series Push-In Tube Fittings 1/8" to 1/2" Tube Sizes UNF to 1/2" NPT Thread Options
Section 1 Pneufit Inch Series Push-In Tube Fittings to 1/2" Tube Sizes 10-32 UNF to 1/2" NPT Thread Options Inch Series Product Numbering System..................FIT-1-2 Inch Series Shapes and odes.........................fit-1-3
More informationKOMATSU 30 Flare (Metric Threads)
KOMATSU 30 Flare (Metric Threads) KOMATSU (JIS 30 Flare Metric Thread) Connections / Identification JIS 30 Flare connections include series of inch (BSP) threads and metric threads. This section is dedicated
More informationquality industry solutions
quality industry solutions JSG Industrial Systems HOSE, TUBE & CONNECTION FITTINGS CATALOGUE 2017 JSG INDUSTRIAL SYSTEMS Since its inception in 1968, JSG Industrial Systems has been a proud supplier of
More informationBRASS FITTINGS (R410a) BRASS FITTINGS
(R410a) R410a Short Barrel Flare Nuts 5010404410A 1/4 $4.21 5010808410A 1/2 $8.52 5010504410A 5/16fl x 1/4 tube $5.73 5011010410A 5/8 $13.50 5010606410A 3/8 $7.08 5011212410A 3/4 $20.54 BRASS FITTINGS
More informationMARCH Polyethylene Piping Systems.
MARCH 2017 Polyethylene Piping Systems www.plasson.com.au GLOBAL PRESENCE LOCAL COMMITMENT Get an expert on your team. Plasson has the widest range of compression, electrofusion, threaded and transitional
More informationCertificate of Type Approval (RQS)
Date Issued: 18/OCT/2000 Certificate Number: 00-C15300-X Certificate of Type Approval (RQS) This is to certify that Swagelok Company has met the requirements of ABS Product Type Approval for Swagelok Tube
More informationMacro LNG automotive_last Update January 17 th 2017
Macro LNG automotive_last Update January 17 th 2017 1 1 6 LNG VENT CONNECTIONS Part Number Description Flow capacity 14000 Male Quick Disconnect Vent Metric in US 10 GPM 12895 Male Quick Disconnect Vent
More informationLocal solutions for individual customers worldwide PNEUMATIC PIPEWORK COMPONENTS AND ACCESSORIES STAUFF UK. Super Air Service!
Local solutions for individual customers worldwide STAUFF UK PNEUMATIC PIPEWORK COMPONENTS AND ACCESSORIES www.stauff.co.uk PNEUMATIC PIPEWORK COMPONENTS AND ACCESSORIES Tube Connectors In Line Flow Control
More informationFunction Fittings. Flow Control Regulators. Piloted Function Fittings. Non-Return Valves. LIQUIfit Pressure Fittings. Other Function Fittings
Flow Control Regulators Piloted Non-Return Valves LIQUIfit Pressure Fittings Other Silencers Flow Control Regulators (P. 4-6) Blocking Fittings (P. 4-36) Piloted Non-Return Valves (P. 4-38) Function:
More informationCutting Ring Couplings
Cutting Ring Couplings The soft seal connection with 4-fold benefits 3 Experience plus ideas Oil Solutions PO Box 653 Castlemaine 3450 Phone 0421 336 009 Fax 03 9012 3332 sales@oilsolutions.com.au www.oilsolutions.com.au
More informationSection 2. Shurjoint Grooved Fittings Flow Data / Friction Resistance Ductile Iron Grooved Fittings. Wrought Grooved Fittings
Section 2 Cast & Wrought Grooved Fittings Shurjoint Grooved Fittings... 56 Flow Data / Friction Resistance... 56 Ductile Iron Grooved Fittings 7110 / 7111 / 7112 / 7113 Elbows... 57 7120 / 7135 / 7130
More informationPrestolok 2. Push-in fitting. Catalogue UK
Prestolok Push-in fitting Index Straight connectors male - SPT F3P - p. 6 male - SPP F4P - p. 6 male - metric F8P - p. 7 female - SPP G4P - p. 7 union HPK - p. 7 unequal union HPK - p. 7 90 elbows adjustable
More informationHydraulic Fittings. Design, Manufacture, Distribution
Hydraulic Fittings Design, Manufacture, Distribution Hydraulic Fittings are exclusively distributed by Beaumanor Engineering Ltd of Leicester and manufactured by Balu Auto Components of Chennai India,
More information3/2 Way Ball Valves KHB3K
/ Way Ball Valves KHBK Model code (also order example) KHBK G / L 0 X A... Designation KHBK = / way ball valve Type of connection G = Whitworth female thread ISO 8 LR = Pipe connection light range DIN
More informationVFS 90 (ORFS) Flare tube fitting
according to SAE J1453 and ISO 8434-3 For various tube wall thicknesses in metric or inch dimensions Quick, easy and safe installation Radial installation of the tube Captive/soft seal High nominal pressures
More informationISO, SAE, DIN, JIS, BS, NF
Balfit Hyraulic Fittings The range of Balfit hyraulic hose connectors is prouce accoring to Balflex specifications an to ISO, SAE, IN, JIS, BS, NF an other stanars. It covers a very wie variety of applications
More informationQuicklub Lubrication Systems Fittings, Adapters and Accessories
Divider Valve Mounting Accessories 246416 Valve mounting bracket 51304 ¼" nylon locknut for valve mounting 247023 Grade 8, ¼" valve mounting bolt 239499 Template for divider valve mounting (6, 8, 10 and
More informationONE TOUCH FITTINGS Series WP2
ONE TOUCH FITTINGS - M5 1/ 1/ 3/ 1/2 Features Attractive design Compact size ed nipples of L, T & Y fittings enable plastic portion to turn by 30º Full area of the inner bore of the tubing is available
More informationHow to Identify Fluid Ports and Connectors
How to Identify Fluid Ports and Connectors Accurate identification of ports and connectors in fluid piping systems is necessary before the correct hose or tube assembly can be selected and installed. With
More informationpneumatic function fittings
Parker Legris connectic products are available from MARYLAND METRIS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 email: sales@mdmetric.com web:
More informationQuicklub Lubrication Systems Fittings, Adapters and Accessories
Divider Valve Mounting Accessories 24646 Valve mounting bracket 5304 4" nylon locknut for valve mounting 247023 Grade 8, 4" valve mounting bolt 239499 Template for divider valve mounting (6, 8, 0 and 2
More informationEngineering Data. Assembly Length. How to Determine Correct Assembly Length
Assembly Length How to Determine Correct Assembly Length For most assemblies, the correct assembly length may be determined by direct measurement of the equipment or a drawing. Minimum bend radii as shown
More informationPart/Assy 7527 ECN Ref S000000
Parts List Description Exhaust Manifold,Side Outlet(*) Part/Assy 7527 ECN Ref S000000 SAP Item Illustration RTP RTS Part No Catalogue No / Description Qty ECN 0001 1 X X 36609 MANIFOLD, EXHAUST, 4 CYL,
More informationVISIT OUR DISTRIBUTION & OPERATIONS CENTER
PUSH IN FITTINGS P V. P. W, P. V. W,, V,. T V I I, USA. W 75% ', V. I, V 300 USA P, M S D, C A, A M, F. T, V P. VISIT OUR DISTRIBUTION & OPERATIONS CENTER Vacuforce LLC 933 Western Drive Indianapolis IN
More informationHow to Identify Fluid Ports and Connectors
How to Identify Fluid Ports and Connectors Foreword Accurate identification of ports and connectors in fluid piping systems is necessary before the correct hose or tube assembly can be selected and installed.
More informationCartridges and Customised Products
Cartridges and Customised Products 2-2 Cartridges and Customised Products 2-3 2-4 Cartridges Polymer Cartridges Compressed Air Fluids and Gases 3100 Carstick Page 2-8 3086 Quick Fitting Page 2-8 3089 Quick
More informationSKY Refrigeration Brass Fittings. Forged Short Barrel Flare Nuts (Co 2. Forged Long Barrel Flare Nuts (Frost Free & Co 2
Forged Short Barrel Flare Nuts (Co 2 ) 13 SKY Item No. Item Description CO2 Pack qty 201-0404 1/4 SAE Yes 10 201-0504 5/16 SAE X 1/4 Tube Yes 10 201-0505 5/16 SAE Yes 10 201-0606 3/8 SAE Yes 10 201-0808
More informationLIQUIfit Push-In Fittings
LIQUIfit Push-In Fittings This "eco-designed" range proposes an innovative alternative for water applications; no fluid contamination occurs and environmental protection is guaranteed. These fittings ensure
More informationInnovative Design Maximum Capability
Optimum Performance Innovative Design Maximum Capability www.liquifit.net 7205 East Hampton Avenue Mesa Arizona 85209-3301 Introducing From the Trusted Inventor of the Push-to-Connect Fitting With over
More informationFitting assembly. Catalogue /UK
F2 Table of contents Port connections M...F4 Port connections BSPP...F5 Port connections UNF...F6 Port connections TAPER...F7 Adjustable fi ttings with locknut...f8 F EO swivels...f9 Triple-Lok / O-Lok
More informationSlow Speed Centers. For Conventional & Slow Speed Lathes. Revolving Center : Plain Point EXTRA HEAVY DUTY FOUR BEARING
LIST EFFECTIVE FROM DATE : 01/07/2018 Slow Speed Centers TURNMAX MACHINE TOOLS - E-mail:sales@turnmax.in / turnmaxsales@gmail.com DATE : 01/07/2018 For Conventional & Slow Speed Lathes. Revolving Center
More informationSCREW HOSE COUPLINGS SCREW HOSE COUPLINGS B.1. STANDARD. LMC s screw hose couplings with a smooth hose shank comply with EN / DIN 2817.
SCREW HOSE COUPLINGS B.1. STANDARD LMC s screw hose couplings with a smooth hose shank comply with EN 14420-5 / DIN 2817. OPERATION Screw hose couplings are used to connect hoses with male or female BSP,
More informationBuild the future, prepare for LNG
LNG Liquefied Natural Gas is the efficient new green fuel Build the future, prepare for LNG Manufacturing safe and innovative quality products Your LNG partner: LNG Vent Connections Male Quick Disconnect
More information< INTRODUCE BONDED SEALS >
< INTRODUCE BONDED SEALS > ORIGINAL TYPE: The bonded seal was originally designed to replace copper type washers in higher pressure systems. Simple in construction the gasket comprises a metal annulus,
More informationBetabite Fittings. Hardy Spicer, 1/9 Monterey Road, Dandenong South, Victoria, 3175 Toll free Ph:
Betabite Fittings, 1/9 Monterey Road, Dandenong South, Victoria, 3175 Toll free Ph: 1300 30 673 Disclaimer The information and dimensions listed in these catalogues is correct to the best of our knowledge
More informationBASICLINE PROGRAM. Standard components for pneumatics. pilot operated check valve. Messing. throttle with click function.
BASICLINE PROGRAM Standard components for pneumatics pilot operated check valve Messing throttle with click function rotary connector 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY
More informationPRODUCT DIRECTORY OUR GENIUS IS FITTINGS. Issue 1. Nickel Plated Brass BSP Fittings. Compression Fittings
Issue 1 PRODUCT DIRECTORY Compression Fittings Sistem-P Push-in Fittings Compact Push-in Fittings Nickel Plated Brass BSP Fittings Air Valves Silencers Tubing OUR GENIUS IS FITTINGS www.wadefittings.com
More informationThe Revolutionary Fitting System from
The Revolutionary Fitting System from Crystal Engineering Fast, Reliable Leak Free Connections www.crystalengineering.net Crystal Engineering s Revolutionary System Introducing a revolutionary fitting
More informationHIGH PRESSURE BALL VALVES
HIGH PRESSURE BALL VALVES HIGH PRESSURE BALL VALVES TABLE OF CONTENTS Page Description 3 Valve Design 3 Product Features 3 Available Options 3 2-Way with NPT and SAE Connections 4 2-Way with SAE Split
More informationcontents MALLEABLE PIPE FITTINGS BUsHEs NiPPlEs PlUgs caps BENds BackNUTs UNioNs TEEs 171 cross PN25 p socket PN25 p socket PN25 p.
contents BUsHEs 140 Hexagon Bush p.5 NiPPlEs 144 octagon Nipple p.6 145 Hexagon Nipple p.6 PlUgs 146 Beaded Plug - solid p.7 147 Plain Plug - Hollow p.7 148 Plain Plug - solid p.7 149 countersunk Plug
More informationSection 7. Socket Weld and Threaded Fittings. Socket Weld and Threaded Fittings 7-1
Section 7 Socket Weld and Threaded Fittings This Section contains dimension and tolerance information extracted from American and British specifications applicable to socket weld and threaded fittings.
More informationHyva Hoses & Adapters Introduction
Introduction Hyva Hoses Hoses offered by HYVA comply with the highest safety standards for truck hydraulics. Working pressures range from 225 to 350 bar. Code system hydraulic hoses Hose 1 H.P. 16-2000
More informationTUBE & PIPE SECTION D
TUBE & PIPE SECTION pirtekusa.com Page General Technical ata for Tube and Pipe... 2 Flow Rate & Temperature Recommendations... 3 Schedule 40, 80, 160 Pipe ata... 3 Tube ata Standard Sizes... 4 TUBE AN
More informationTubes and stiffener sleeves Use of stiffener sleeves
Tubes and stiffener sleeves Use of stiffener sleeves very thick wall thickness not recommended thicker wall thickness decreasing pressure resistance increasing wall thickness ideal wall thickness no stiffener
More informationFITTINGS, CONTROLS AND ACCESSORIES
, CONTROLS AND ACCESSORIES Regardless of your application, Norgren has fittings and accessories to complete your pneumatic package. Norgren has an extensive lineup of Pneufit push-in fittings in metric
More informationConnection solutions for industrial applications Date: 07/2014
Catalogue 35 WEH Connectors Pressure-tight connections in seconds to threads, beads, tubes, etc. Connection solutions for industrial applications Date: 07/2014 WEH - We Engineer Hightech ll rights reserved,
More informationCLAMPING ELEMENTS SELF-CENTRING RCK 15 TYPE SELF-CENTRING RCK 13 TYPE
CLAMPING ELEMENTS The clamping system connects one or two component parts solidly to the drive shaft, which allow motion to be transmitted or to withstand an axial thrust. Friction connection enables gaps
More informationTable Of Contents. Assembly Instructions. Identification of Sync-Lok Tube Fittings. Reducing Port Connector 36. Male Elbow 11
able Of Contents eneral Information 1 Union Cross 27 Ordering Information 3 Reducer 28 ube Selection Data 5 Bulkhead Reducer 29 Male Connector 7 Male Adapter 31 Male Bore hrough Connector 9 emale Adapter
More informationFittings and Accessories. For oil and grease. For Centralized Lubrication Systems and General Use
Fittings and Accessories For oil and grease. For Centralized ubrication Systems and General Use Fittings and Accessories This brochure provides an overview of metallic pipe unions for luid engineering.
More information3-PIECE TUBE ASSEMBLY
3-PIECE TUBE ASSEMBY STAINESS STEE HIGH PRESSURE 37 TUBE FITTINGS 1/8 TO 2 MEETS SAE STANDARD J514 If necessary, see SAE Standard J514 for a complete list of dimensions. NPT Tapered Pipe Threads meet the
More information2 NPT FILTER REPLACEMENT SCREENS FOR 1 1/4 & 2 FILTERS
ALUMINUM Y FILTERS 50 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure. 80 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure.
More information1 1/4 NPT FILTER 2 NPT FILTER REPLACEMENT SCREENS FOR 1 1/4 & 2 FILTERS 1 1/4 SCREENS 2 SCREENS. Hole Size Designation 150 Mesh 1M150
ALUMINUM Y FILTERS 50 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure. 80 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure.
More informationMain Block Series. Concentrated Branching Joint for Assembly. Assembling Manifold Blocks for Concentrated Branching
http://www.pisco.co.jp FITTING CONTROLLER VALVE TUE MAKE-TO-ORDER PRODUCTS Concentrated ranching Joint for Assembly Main lock 310 Assembling Manifold locks for Concentrated ranching Same Flow Rate with
More informationAir Compressor Service Parts List One-Step CAFS Model 150-OS Eclipse GEN 2.0 CAFS Model 150-ECL Pump Models HL200K, HL300K, HL400K Index:
Document Number Issue Date 6/2/15 Rev. Date 12/18/17 Air Compressor Service Parts List One-Step CAFS Model 150-OS Eclipse GEN 2.0 CAFS Model 150-ECL Pump Models HL200K, HL300K, HL400K Index: Component
More informationHose, Tubes & Ducting. Hose, Tubes & Ducting
Hose, Tubes & Ducting 382 Together, we can kick out the cost of contamination 80% of all hydraulic failures are caused by poor maintenance and contamination. So let s put a stop to it today! Partner with
More informationNOTES FOR PLUG 30% RINGS UPTO 24MM 40% RINGS ABOVE 24 MM 40% 8) FOR LEFT HAND GAUGES ADD TO BASIC LIST PRICE.
NOTES 1) THIS PRICE LIST IS RIGHT HAND GAUGES ONLY. 2) PRICE INDICATED FOR PLUG ARE FOR A DOUBLE END CONSISTING OF GO & NOGO 3) PRICE INDICATED FOR RINGS ARE OF GO OR NOGO 4) PRICE FOR SINGLE ENDED GO
More informationHose, Tubes & Ducting. Hose, Tubes & Ducting
Hose, Tubes & Ducting 392 Together, we can kick out the cost of contamination 80% of all hydraulic failures are caused by poor maintenance and contamination. So let s put a stop to it today! Partner with
More informationThrottle (Needle) Valve Standard Series
http://www.pisco.co.jp CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type Throttle (Needle) Valve Throttle (Needle) Valve Standard 448 Control Actuator Speed or Pneumatic Signals. Adjustable
More informationBRASS OVERVIEW REUSABLE HOSE FITTINGS FRAME FITTINGS - STEEL TERMINAL BOLTS DOT AIR BRAKE FITTINGS - NYLON TUBING
BRASS OVERVIEW REUSABLE HOSE FITTINGS FRAME FITTINGS - STEEL TERMINAL BOLTS DOT AIR BRAKE FITTINGS - NYLON TUBING DOT AIR BRAKE FITTINGS - COPPER TUBING DOT PUSH LOCK FITTINGS - NYLON TUBING DOT COMPOSITE
More informationCOUPLINGS, VALVES AND TUBING DELTA FLUID PRODUCTS LIMITED
Wade COUPLINGS, VALVES AND TUBING DELTA FLUID PRODUCTS LIMITED DELTA FLUID PRODUCTS LTD Delta Fluid Products have been associated with the manufacturing of Valves and Fittings for Fluid and Gases for over
More informationHighline Manufacturing TopGun 1999 Page 1 A. TABLE OF CONTENTS... 1
Highline Manufacturing TopGun 1999 Page 1 A. Table of Contents A. TABLE OF CONTENTS... 1 B. ASSEMBLY & INSTALLATIONS... 3 1. FLAIL DRUM ASSEMBLY... 3 2. FLAIL DRUM INSTALLATION... 4 3. FEED ROLLER ASSEMBLY...
More informationStandard screw fittings Brass Art. No to
251.02 Reducing nipple, short type Art. No. Ident No. Male thread Female thread 290.940 108010 M14x1.5 M10x1.0 11.0 7.0 17 290.941 108011 M24x1.5 M16x1.5 24.0 16.0 27 251.00 111101 G 1/8 M5 11.0 7.0 14
More informationShinya Nojima President & COO Technology can be found wherever something is flowing The is a leading manufacturer of high-technology products for a wide range of industries. Our corporate policy is to
More informationSpecialty Fluid Fittings
Buyers guide Specialty Fluid Fittings for lubrication systems FEATURING Couplings & s Adapters Compression fittings Check valves Meter and control units bijur.com B r6-06 Buyer's guide to specialty fluid
More informationAssembly instructions
Assembly instructions Important notes on VOSS assembly instructions In order to ensure maximum performance and functional reliability of VOSS products, the respective assembly instructions, operating conditions
More informationSPIRAL POINT TAPS for through hole tapping
SPIRAL FLUTE TAPS for blind hole tapping Ideally suitable for blind hole tapping in most materials, particularly aluminium, brass, copper and similar metals. The build up of swarf at the bottom of the
More informationSeal: NBR. Silicone-free. Regulations. DI: 2002/95/EC (RoHS) RG: 1907/2006 (REACH) DI: 97/23/EC (PED)
Non-Return Valves Non-return valves allow compressed air to flow in one direction and prevent it from flowing in the other. Fitted upstream of the circuit to be protected, they provide total protection.
More informationATLANTIC PLASTICS is a company of. Gunmetal Service Fittings Data Sheet
ATLANTIC PLASTICS is a company of Gunmetal Service Fittings Data Sheet EBCO - Service Connections The EBCO range of gunmetal service fittings covers a variety of pipe material and sizes. Fittings for steel
More information