Oil and Gas - O&G Series Bladder Accumulators
|
|
- Molly Payne
- 5 years ago
- Views:
Transcription
1 Oil and Gas - O&G Series ladder ccumulators High Pressure, 07 to 760 bar
2 Catalogue HY0-4004/UK rev. 0 escription esigned for high pressure hydraulic systems, the O&G bladder accumulator has been developed for the hazardous environments encountered within the Oil & Gas Industry and other aggressive environments. Carbon and stainless steel (up to 760 bar). Features/enefits xtensive range of international and industry approvals (P 04/68/U, N 459, TX, SM VIII div, SLO, CRN, S0, NR, CUTR, NV, V Marine, S and GL) Rigorous product testing and continuous product development The O&G bladder accumulator is specially designed and developed for the hazardous environments encountered within the Oil and Gas industry however it is also ideally suited for other highly demanding markets. They meet a wide range of approvals and are tailor made to meet your requirements (e.g. special coatings, IP-class and TX/x approvals). Utilizing comprehensive tools and resources including an applications database, C/CM, finite element analysis, reliability studies and simulation we have optimized the design and performance of the accumulator. Parker Olaer bladder accumulators are suitable for use in more than 5 countries (all hydraulic accumulators for urope are C marked) and they can meet an extensive range of international and industry approvals. Rigorous product testing and continuous product development help to ensure our hydraulic accumulators operate at optimum efficiency and can perform in the most demanding environments. Parker accumulator accessories such as Safety locks, urst iscs and Permanent Charging Sets, can aid the safe installation and operation of the accumulators in any hydraulic system. Parker Olaer have developed very sophisticated simulation software to optimize sizing recommendations for hydraulic accumulators. You can download the accumulator sizing software from Large selection of materials and fittings to suit every hydraulic system. Parker Olaer offers a wealth of product knowledge and experience thus enabling us to provide first class technical support and customer service. Markets Oil and Gas Industrial pplications TOPSI PPLICTIONS Intervention and Workover Control Systems (IWOCS) and Workover Control Systems (WOCS) Wellhead Control Panels (WHCP) Chemical Injection Skids Winch Systems Frames Heave Compensation avit Systems Cranes, Hydraulic Power Units (HPUs) low Out Preventers (OP) SUS PPLICTIONS Christmas Trees Manifolds low Out Preventers (OP) Subsea ccumulator Modules (SMs) and/or Subsea Control Modules (SCMs) INUSTRIL Hydraulic Power Units (HPUs) Plastic Moulding Machines Hydraulic Presses 96 Parker Hannifin
3 Catalogue HY0-4004/UK rev. 0 Technical Characteristics The accumulator comprises of: Shell Forged seamless chrome molybdenum steel, designed and manufactured to P 04/68/U and C marked. Label With assembly specification and installation details. Material Certification vailable on request for all major pressure loaded parts to N 004. Finish One coat primer paint as standard. Special paints available. ladder Totally enclosed construction with an extensive range of elastomers available. Fluid Port ssembly Integral high-flow port and poppet valve assembly with an anti-extrusion ring. Safety ll gas-loaded accumulators are pressurised vessels and it is recommended that safety consideration be given to the application in which they are used. relief valve should always be fitted to the hydraulic system with the option of a burst disc to protect the accumulator. See Installation and Servicing data sheet for information regarding installation of accumulators. Pressure Testing hydro static pressure test is carried out on all our accumulator shells during the manufacturing process. We can carry out additional pressure testing witnessed by a specified Inspection uthority and/or customer as an optional extra if required. We can also carry out a hydro-pneumatic pressure test on the complete assembly as an optional extra if required. gain this can be witnessed by a specified inspection authority and/or customer. ccessories complete range of accumulator accessories are available from Parker. Spare Parts vailable on request. ladder etails Parker offer a wide range of bladder materials to suit most applications. Table - Material according to temperature range. Range of bladder materials available with their corresponding working temperature range when handling non-aggressive fluids. Material ladder Material Temperature Range (eg. C) Code Static ynamic 0 Nitrile utyl Low Temp Nitrile Low Permeability Nitrile Fluorocarbon (Viton) High romatic Nitrile High Temp Nitrile PI - Chlorohydin thylene Propylene (P) -0 0 PI - Chlorohydin K Special Low Temp Nitrile L Peroxide Cured PM please contact us for details M High Temperature Flurocarbon N Low Temp Nitrile Table - ladder capacity / overall dimensions ccumulator imension Stem iameters Capacity (Litres) H 5/8 7/8 Nominal (6mm) (mm) (50mm) * *.5 (.5) 47 9 * * 5 00 * * * * * 9 (0) * * * * * * * * * * * * * * 97 Parker Hannifin
4 Catalogue HY0-4004/UK rev. 0 O&G Series, 07 to 40 bar 4 5 ladder Kit comprising: ladder assembly ladder Gas valve assembly Locknut Protective cap 'O' ring stem nti extrusion ring assembly C 4 5 nti extrusion ring 'O' ring fluid port onded seal* 4 ack-up ring Fluid port assembly comprising Fluid port body Spring Poppet valve 4 5 Collett Piston C C C C Flanged washer Locking ring leed adaptor* leed valve* Shell assembly comprising: Shell Label Label warning Note: Models /54 litres detailed above. Models 0.6 litres have Gas Valve assembly integral with bladder stem without protective cap fitted. * Not fitted on all models Parker Hannifin
5 Catalogue HY0-4004/UK rev. 0 O&G Series 07 to 40 bar: How to order Volume in Litres O: for 0.6 Litres 0: for 0 Litres OF: for 0.6 Litres 0: for 0 Litres 0: for Litres 8: for 8 Litres 0: for.5 Litres 7: for 7 Litres 04: for 4 Litres 54: for 54 Litres ladder Material 0: Nitrile standard : utyl : Low temperature nitrile : Low permeability nitrile 6: Viton 8: High temperature nitrile ladder Stem/Gas Valve 0.6 to Litres 4-7 Litres 0: 5/8 UNF CS Stem/ /4 SP rass Gas Valve 7/8 UNF CS Stem/ /4 SP rass Gas Valve S: 5/8 UNF SS Stem/ /4 SP SS Gas Valve 7/8 UNF SS Stem/ /4 SP rass Gas Valve F: n/a 7/8 UNF SS Stem/ /4 SP SS Gas Valve 9: 5/8 UNF CS Stem/ rass Gas Valve n/a 4: n/a 7/8 UNF CS Stem/ rass Gas Valve 6: n/a n/a 54 Litres 0: M50x.5P CS Stem/ /4 SP rass Gas Valve S:M50x.5P SS Stem/ /4 SP rass Gas Valve F: M50x.5P SS Stem/ /4 SP SS Gas Valve 4: 7/8 UNF CS Stem/ rass Gas Valve 6: M50x.5P CS Stem/ rass Gas Valve Shell and Fluid Port 00: Oil service 0: Low/medium corrosive service (lined shell) W6: Stainless steel externals, unlined shell CZ: Stainless steel externals, unlined shell / NPT connection (0-54 litre only) W: Stainless steel externals, unlined shell /4 NPT connection (0-54 litre only) U: Stainless steel externals, unlined shell NPT connection (0-54 litre only) L: Stainless steel externals, unlined shell / SP connection (0-54 litre only) Z: Stainless steel externals, unlined shell /4 SP necked connection (0-54 litre only): : Oil service (NPT connection) 4: Low/ medium corrosive service (lined shell, NPT connection) Maximum Working Pressure 0: 07 bar : 0 bar 4: 45 bar 5: 50 bar 4: 40 bar (0-54L only) esign Standard/ uthority pproval : Lloyds/C 99 Parker Hannifin
6 Catalogue HY0-4004/UK rev. 0 O&G Series 45 bar, 0 to 57 Litres Standard version (Carbon Steel shell/nr mix) compatible with mineral oils (). ccording to P 04/68/U Part numbers, ccessories, imensions Clamps Support racket Lifting ye on gas side Complete Repair Kit Part Number (quantity) Part number Part number Part number Part number 00S-CZ FCH409-00S-CZ 00S-CZ FCH409-00S-CZ 80S-CZ FCH409-80S-CZ 70S-CZ FCH409-70S-CZ 540S-CZ *5K-C 540S-CZ * For more adaptor options see pages 74&75. Nominal Capacity Litres ffective Gas vol. Litres Work press. bar Max Flow Rate lt/min Weight ry Kilo imensions in mm unless stated otherwise and subject to manufacturer's tolerances C F G H J K L M N P O ¼ SP 5/8 UNF ½ SPF OF ¼ SP 5/8 UNF ¾ SPF ¼ SP 5/8 UNF ¾ SPF ¼ SP 5/8 UNF ¾ SPF ¼ SP 5/8 UNF SPF ¼ SP 7/8 UNF ¼ SPF ¼ SP 7/8 UNF ¼ SPF ¼ SP 7/8 UNF SPF ¼ SP 7/8 UNF SPF ¼ SP 7/8 UNF SPF ¼ SP 7/8 UNF SPF ¼ SP 7/8 UNF SPF ¼ SP 7/8 UNF SPF ¼ SP 7/8 UNF SPF ¼ SP 7/8 UNF SPF ¼ SP 7/8 UNF SPF ¼ SP 7/8 UNF SPF ¼ SP 7/8 UNF SPF ¼ SP 7/8 UNF SPF ¼ SP 7/8 UNF SPF ¼ SP 7/8 UNF SPF ¼ SP M50x SPF ¼ SP M50x SPF ¼ SP M50x SPF ¼ SP M50x SPF Parker Hannifin
7 Catalogue HY0-4004/UK rev. 0 Part Number Vol. (Litres) Max. Operating Pressure (bar) Max. Flow Rate (lpm) Min/Max Operating Weight Temp. (kg) (ºC) Gas Valve Size () (Inch) imensions C F G H Fluid Port Connection (J) K L M N P 00S-CZ /+80 5 G /4 7/8 UNF ½"NPTF S-CZ / G /4 7/8 UNF ½"NPTF S-CZ /+80 6 G /4 7/8 UNF ½"NPTF S-CZ /+80 9 G /4 7/8 UNF ½"NPTF S-CZ /+80 0 G /4 M50x ½"NPTF ()Temperature range can change depending on shell and elastomer material. Please see bladder materials and Type (page 87) bove dimensions are in mm and are subject to manufacturing tolerances. C GS VLV STM /F G PROTCTIV CP ON 04L N OV F H TIL 0/7L F P (/F) N (/F) H M J K L 0 Parker Hannifin
8 Catalogue HY0-4004/UK rev. 0 O&G Series, 480 & 57 bar ladder Kit comprising: ladder assembly ladder Gas valve assembly Locknut Protective cap 'O' ring stem nti extrusion ring assembly nti extrusion ring 'O' ring fluid port* onded seal ack-up ring C Fluid port assembly comprising Fluid port body Spring Poppet valve Collett Piston Flanged washer C C C C Shell assembly comprising: Shell Label Label warning SCTION - SCL : 5 0 Parker Hannifin
9 Catalogue HY0-4004/UK rev. 0 O&G Series 480 and 57 bar: imensions Capacities and imensions Nominal Capacity Litres ffective Gas vol. Litres Work press. bar Max Flow Rate lt/min Weight ry Kilo imensions in mm unless stated otherwise and subject to manufacturer's tolerances C F G H J K L ¼ SP 7/8 UNF ¼ SP 7/8 UNF ¼ SP 7/8 UNF ¼ SP ¼ SP 7/8 UNF 7/8 UNF see table ¼ SP 7/8 UNF ¼ SP M50x.5P ¼ SP M50x.5P Note: imensions are based on current stock and are subject to change without prior notice. imension J Code Shell and Fluid Port H Stainless Steel - / NPT female (480 bar) GC Stainless Steel - / SP female (57 bar) GJ Stainless Steel - / SP female (480 bar) J Stainless Steel - / NPT female (57 bar) Other available on request. GS VLV STM C /F G F L /F H J K 0 Parker Hannifin
10 Catalogue HY0-4004/UK rev. 0 O&G Series 480 to 57 bar: How to order Volume in Litres 0: for 0 Litres 0: for 0 Litres 8: for 8 Litres 7: for 7 Litres (480 bar only) 54: for 54 Litres (57 bar only) 00M-H-48 ladder Material 0: Nitrile standard : utyl : Low temperature nitrile : Low permeability nitrile 6: Viton 8: High temperature nitrile ladder Stem/Gas Valve 0 to 7 Litres M: 7/8 UNF SS Stem / /4 SP SS HP Gas Valve N: 7/8 UNF SS Stem / / UNF Port (No Gas Valve/Pro Cap) 54 Litres M: M50 x.5p SS Stem / /4 SP SS HP Gas Valve N: M50 x.5p SS Stem / / UNF Port (No Gas Valve/Pro Cap) Shell and Fluid Port H: St. Steel Fluid Port - / NPT female (480 bar) GC: St. Steel Fluid Port - / SP female (57 bar) GJ: St. Steel Fluid Port - / SP female (480 bar) J: St. Steel Fluid Port - / NPT female (57 bar) Maximum Working Pressure 48: 480 bar 5: 57 bar Maximum Working Pressure : Lloyds/C 04 Parker Hannifin
11 Catalogue HY0-4004/UK rev. 0 O&G Series, 690 to 760 bar ladder Kit comprising: ladder assembly comprising of:- ladder Gas valve assembly F 4 Locknut Protective cap 5 6 'O' ring stem Lifting ye C nti extrusion ring assembly:- nti extrusion ring 5 'O' ring fluid port* ack-up ring Fluid port assembly comprising:- Fluid port body Spring Poppet valve Collett Piston Flanged washer Lock ring C C Shell assembly comprising: Shell C C Label Label warning F Lifting ye ssembly:- F F Protective cap Lifting ye Parker Hannifin
12 Catalogue HY0-4004/UK rev. 0 Nominal Capacity Litres ffective Gas vol. Litres Work press. bar Q Max (l/min) Weight ry Kilo O&G Series 690 to 760 bar: imensions imensions in mm unless stated otherwise and subject to manufacturer's tolerances C F G H J K L 7/8"UNF /8" UNF /8" UNF See See elow M50x.5P M50x.5P elow M50x.5P M50x.5P M50x.5P M50x.5P M50x.5P M50x.5P Litre (Gas Valve Litre and above accumulators L and above accumulators include a lifting eye (Gas Valve) C (/F) C (/F) G imension - ladder Stem/Gas Valve Code - 5 Litre - 54 Litre L 5K 7/8"UNF SS Stem / /4"SP SS HP Gas Valve M50x.5P SS Stem / /4"SP SS HP Gas Valve F imension J - Shell and Fluid Port Code - 5 Litre - 54 Litre P Stainless Steel / "SP Female Special C SS xternals/cs Internals / "SP Female Special F SS xternals/ss Internals / "SP Female Special Note: imensions are based on current stock and are subject to change without prior notice. H J K L (/F) 06 Parker Hannifin
13 Catalogue HY0-4004/UK rev. 0 O&G Series 690 to 760 bar: How to order Volume in Litres 0: for Litres 0: for 0 Litres 0: for.5 Litres 7: for 7 Litres 05: for 5 Litres 54: for 54 Litres : for Litres 050L-P-69 ladder Material 0: Nitrile standard : Low permeability nitrile : utyl 6: Viton : Low temperature nitrile 8: High temperature nitrile ladder Stem/Gas Valve - 5 Litres - 54 Litres L: 7/8 UNF SS Stem / /4 SP SS HP Gas Valve 5K: M50 x.5p SS Stem / /4 SP SS HP Gas Valve Shell and Fluid Port - 5 Litres - 54 Litres P: St. Steel Fluid Port / SP Female Special C: SS xternals/ CS Internals/ SP Female Special F: SS xternals/ SS Internals/ SP Female Special (see table on next page for fluid port adaptors) Maximum Working Pressure+ 69: 690 bar 75: 750 bar (-5 litre only) 76: 760 bar (-54 litre only) Maximum Working Pressure : Lloyds/C 07 Parker Hannifin
14 Catalogue HY0-4004/UK rev. 0 Fluid Port daptors Nominal Capacity (Litres) imensions J N P (mm) Part Number "SP /4"SP XXX "SP /8" SP XXX "SP /" SP XXX - 5 litres "SP /4" SP XXX "SP /4" NPT XXX "SP /" NPT XXX "SP /4" NPT 0 5-XXX "SP /8"MP utoclave XXX "SP 9/6"MP utoclave 0 57-XXX "SP /4"SP 5574-XXX " SP /8"SP 5575-XXX - 54 litres " SP /"SP 5576-XXX " SP /4"SP 5577-XXX " SP /4"NPT 5569-XXX " SP /8"NPT 5570-XXX " SP /"NPT 557-XXX " SP /4"NPT 557-XXX " SP /4"MP utoclave XXX " SP /8"MP utoclave XXX P JM JM N 08 Parker Hannifin
Bladder Accumulator 690 to 760 Bar Range
Hydraulic & Offshore Supplies ladder ccumulator 690 to 760 ar Range YOUR GTWY TO GLOL SUPPLY HOS SSMLIS PRSSUR TSTING WLFORM QUIPMNT PCKGS FLNGS PIP & TU Hydraulic HY0-00-S/UK Featur es and imensions ladder
More informationBladder Accumulators Industrial (Legacy) 207 bar to 420 bar range
ladder ccumulators Industrial (Legacy) 07 bar to 0 bar range HY0-008-S/UK Features and imensions ladder ccumulators 07, 0, 5 & 0 bar esign Features and enefits C Shell Oil Service - seamless shell, designed
More informationEHP Series Piston Accumulators. 0.1 to 1000 Litres, up to 350 bar (as standard)
EHP Series Piston ccumulators 0.1 to 1000 Litres, up to 350 bar (as standard) Description The EHP piston accumulators are manufactured in arbon & Stainless Steel and are available with a wide range of
More informationDA Series Diaphragm Accumulators
DA Series Diaphragm Accumulators Previously known as ELM Series Description Diaphragm accumulators are inexpensive, compact and lightweight and are ideally suited where weight and space is an important
More informationEHV Ser ies: General Infor mation Bladder Accumulators
EHV Ser ies: General Infor mation ladder ccumulators Operation of the OLER gas loaded bladder accumulator is based on the considerable di erence in compressibility between a gas and a liquid, enabling
More informationAccumulators, Accessories and Spares
Accumulators, Accessories and Spares HY10-4004/UK - Effective June 1st, 2013 Index Table of Contents Table of Contents 2 Introduction 3 How to Size? 4 General Information Accumulators 5-8 Bladder Accumulators
More informationA Series Piston Accumulators. 0.5 to 300 Litres, 250 and 350 bar
Series Piston ccumulators 0.5 to 300 Litres, 250 and 350 bar Description Piston ccumulators up to 80 Litres volume, 200 ore, 250 ar & 350 ar.parker series piston accumulators offer quality design and premium
More informationAccumulators, Accessories and Spares
Low Pressure BLADDer ACCUMULATors High Pressure BLADDER ACCUMULATors REGULATIONS Corrosion ProTECTIONS BLADDer MATERIALS and types PisTON ACCUMULATORS ATTENUATors DIAPHRAGM ACCUMULATors CLAMPS support
More informationBladder Accumulators za03 Bottom Repairable Top Repairable Medium Flow High Flow Transfer Barrier Gas Bottle
LADDER PRODUCTS za03 ottom Repairable Top Repairable Medium Flow High Flow Transfer arrier Gas ottle Features: Operating Pressures to 6600 PSI Ten Different Capacities from 10 cu in to 15 gallons Nine
More informationPiston Accumulators Series Catalog /USA Page
atalog 1630-7/US Page Piston ccumulators Series 5000 Series 5000 Piston ccumulators Heavy uty Service with 5000 PSI Operating Pressure 2" thru 9" ores with Over 30 Standard apacities Patented V-O-ring
More informationPiston Accumulators Series Catalog HY /US Page
Page Series 5000 Series 5000 Piston ccumulators Heavy uty Service with 5000 PSI Operating Pressure 2" thru 9" ores with Over 30 Standard apacities Patented V-O-ring Piston Seals Serviceable Threaded End
More informationThe Professional Choice EHV/EHVF. Bladder Accumulators. OLAER EHV/EHVF High pressure bladder type conforming to EC regulations
The Professional Choice EHV/EHVF Bladder ccumulators OLER EHV/EHVF High pressure bladder type conforming to EC regulations 2 OLER EHV/EHVF Increasing the safety of your systems! The accumulators installed
More informationAccumulator & Cooler Distributor Catalogue. maku GmbH & Co. KG - Fon: / Fax: /
Accumulator & Cooler Made in Europe - serving all markets and industries Parker Wroclaw (Turin, Poland) Products: Coolers (All coolers) Piston Accumulators (ACP, A, AP) Market Focus: Industrial, Mobile,
More informationBladder Special Orders 46 Accumulator Selection, Commissioning, Installation & Maintenance 47
Product Catalog Table of Contents Section Subject Page Contact Contacting Accumulators, Inc. Ordering Standard Part Number List 3 Accumulator Ordering Table Special Order Products 5 Product Drawings AccuMight
More informationPiston Accumulators Series Catalog HY /US
Series 3000 Series 3000 Heavy uty Service with 3000 PSI Operating Pressure 2" thru 12" ores with Over 50 Standard apacities Patented V-O-ring Piston Seals Serviceable Threaded End onstruction Five Standard
More informationAccumulator charging valves & kits
accumulator charging valves & kits HYDROTECHNIK UK LIMITED Accumulator charging valves & kits Minimess gas charging valves Nitrogen pressure regulators & charging devices Nitrogen accumulator gas charging
More informationDiaphragm Accumulators AD Series
Parker Diaphragm Accumulators Feature: Operating Pressures to 250 Bar Capacities from.075 to 2.80 Liters Compact and Lightweight Low Cost, Non-Repairable Design Nitrile & Hydrin Diaphragms Durable Metric
More informationBladder-type accumulators
Electric Drives and Controls Model HAB 5000 psi pressure gauge male Part number: R978048671 Contents Hydraulics Bladder-type accumulators Component series 5X Nominal capacity 1 quart to 15 gallons Maximum
More informationSliding Seal & Brass Poppet Valves
Sliding Seal & rass Poppet Valves anually Operated Section PL / VL Series... 2-3 HV Valve... 4-5 Hand Operated Valves,... 6-7 utton Operated Valves...8 Hand / Cam utton Valves...9 leed Valve...10 old text
More informationWP6 All SS (SS 316 Wetted Parts ) Pressure Gauge Bourdon type
pecial Features xternal zero adjustment (optional) tainless steel case & measuring system ocket directly welded to case Dry and liquid filled version tandard followed N 837- (for N 00, & 0 mm) C marking
More informationA c c u m u l at o r. The pressure is always on.
c c u m u l at o r The pressure is always on. www.tobul.com Table of Contents Piston ccumulators 7 Econolator 8 3,000 PSI Series 9 5,000 PSI Series 12 10,000 PSI Series 14 Greater than 10,000 PSI MWP
More informationGT All SS Industrial Dial Thermometer Gas Filled system
TM ll SS Industrial Dial Thermometer Gas Filled system Special Features approved electrical contacts. Inert gas filled expansion system. Stainless steel case & stem With or without thermowell Silicon oil
More informationS, M, L, and 31 Series. Straight-pattern flow coefficients (C v ) from to Low- and high-pressure service
www.swagelok.com Metering Valves S, M, L, and Straight-pattern flow coefficients (C v ) from 0.004 to 0.16 Low- and high-pressure service Repeatable vernier handles available rass and 316 stainless steel
More informationCompression Fittings 36 Series Metric
6 Series 4 mm 28 mm O/ l l l l Wide range of types and sizes Rugged and durable Suitable for use under extreme conditions of pressure and temperature Ideal for most general industrial applications Technical
More informationPressure Control Valves. General Description. Specifications. Ordering Information
Catalog HY14-3000/US Technical Information Control Valves Series RCP General escription Series RCP in-line pressure control valves are chiefly used as remote control valves. They limit system pressure
More informationBladder Accumulators. Bladder Accumulators Introduction. Bladder IN THIS SECTION. Features. Models, Capacities & Dimensions. 10 cu in to 15 gallons
Overview ntroduction N TS SECTON Overview 51 Specifications 52, Capacities & Dimensions Bottom Repairable 54 Top Repairable 55 igh-flow 56 Transfer Barrier 57 Bottles 58 Options & Accessories 59 Replacement
More informationFlow rates to 500 l/min
FF 5 Filter housing in according to SE J066 for F filter elements Maximum pressure 50 bar Flow rates to 500 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing:
More informationAccumulator. The pressure is always on.
ccumulator The pressure is always on. www.tobul.com Table of Contents Piston ccumulators 7 Econolator 8 3,000 PSI Series 9 5,000 PSI Series 12 10,000 PSI Series 14 Greater than 10,000 PSI MWP pplications
More informationPDE2611TCUK-ca Air Preparation. Miniature FRL series. Miniature FRL Series. Parker Hannifin Corporation Pneumatic Division - Europe
P26TUK-ca ir Preparation Miniature RL series Miniature RL Series 49 Parker Hannifin orporation Pneumatic ivision - urope P26TUK-ca ir Preparation Miniature RL series - /8", /4" asic /8" ody 4 ilters -
More information,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents
MTRI,, WY VLVS 6P/6P SRIS ,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents Introduction... Page - Product
More informationReliable and powerful starting for diesel engines and generators
When Power is Critical EN-1834-1 EN-1834-2 Reliable and powerful starting for diesel engines and generators HYDRAULIC STARTING SYSTEMS For diesel engines up to 80 litres IPU s hydraulic starting systems
More informationHydraulic. Quick Couplings
Hydraulic Quick ouplings -1 Introduction ouble Shut-Off and Straight-Thru ouplings Parker hydraulic couplings have a wide variety of designs, each tailored to a particular application or use. This catalog
More informationQSS: Quick Set System. Product Catalog Compression Sleeve Valves and Fittings to 15,000 psi (1034 bar)
QSS: Quick Set System Product Catalog Compression Sleeve Valves and Fittings to psi (1034 bar) Section Page Introduction.............................. 2 QS Needle Valves........................... 4 QS
More informationTable of Contents. Quick Coupling Products
Quick oupling Products Table of ontents Table Of ontents...1 Fluid Quick ouplings...3 oupling Selection uide...4 Non-Spill ouplings...5 FS Series...5 ouplers...6 Nipples...7 FS Series ust aps & Plugs...8
More informationColorflow and Ball Valves. Industrial Flow Control, Check, Gauge Control. Catalog HY /US
Colorflow and Industrial Flow Control, Check, Gauge Control Catalog HY14-3300/US Colorflow and Fully guided poppets are used on Colorflow valves rather than the less durable ball-check type construction.
More informationThe Eaton Advantage. machinery using accumulators.
Accumulators Table of Contents The EATON Advantage................................................................................. 3 Application Benefits...................................................................................
More informationSpring Return and Double Acting Pneumatic Quarter- Turn Actuators For Output Torques to 13,444 lb.in.
Spring Return and ouble cting Pneumatic Quarter- Turn ctuators For Output Torques to 13,444 lb.in. Features and benefits ompact rack and pinion design utilizes the whole piston area to develop output torque.
More informationClass 1 as per EN o C to 65o C 15 kg/cm2 ( without thermowell ) 120 % of Full Scale 8 mm ½ BSP (M) Adjustable
Special Features & tex approved electrical contacts. Inert gas filled expansion system. Stainless steel case & stem With or without thermowell Silicon oil filled (optional) Standard followed EN 90. pplication
More informationAccumulator. high pressure bladder type conforming to AS Standard Range AS 1210
Accumulator high pressure bladder type conforming to AS 1210 R Standard Range AS 1210 CONTENTS Benefits of using an accumulator Main Features How to size your accumulator Medium pressure standard AC Range
More informationEHP2 Carbon steel piston accumulator
The Professional Choice in Fluid Management EHP2 Carbon steel piston accumulator 2 OILTECH EHP2 CARBON STEEL PISTON ACCUMULATOR Oiltech, a member of the Olaer Group, and a global player specialising in
More informationMODEL NUMBERS UPDATED. Accumulator. The pressure is always on.
NUMERS UPDTED ccumulator The pressure is always on. www.tobul.com Table of Contents Piston ccumulators 7 EconoLator 8 3,000 PSI Series 9 5,000 PSI Series 12 10,000 PSI Series 14 Greater than 10,000 PSI
More informationD I V I S I O N O F M A R S H B E L L O F R A M
PH Regulator Large Capacity Working Media Include ir, Steam and Liquids ll Vents are Tapped The PH is a direct operating pressure reducing regulator with large capacity. Ideally suited for uses in oil
More informationPN# / 1.15 / ACU Accumulators. Bladder, Piston, Diaphragm
Accumulators Bladder, Piston, Diaphragm About HYDAC HYDAC stands for worldwide presence and accessibility to the customer. HYDAC has over 1000 distributors worldwide and more than 50 wholly owned branches.
More informationKunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 228 Features Bolted bonnet allows easy inspection and servicing without removal from
More informationHYDRAULIC PISTON ACCUMULATORS
HYDRAULIC PISTON ACCUMULATORS WWW.SERVI.NO Product development and production at Servi Cylindersservice' top modern facilities in Rissa. 2 2 SERVI GROUP Ever since 1912, Servi Group has been a key player
More informationKunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 8 Features Bolted bonnet allows easy inspection and servicing without removal from
More informationHigh Pressure Equipment High Pressure Valves, Fittings and Tubing
igh quipment igh Valves, ittings and Tubing 0,000, 40,000 and psi service igh quipment Company has developed a line of igh products to assure safe and easy plumbing for 0,000, 40,000 and psi. These needle
More informationEHP2 Carbon steel piston accumulator
The Professional Choice in Fluid Management EHP2 Carbon steel piston accumulator 2 OILTECH EHP2 CARBON STEEL PISTON ACCUMULATOR Oiltech, a member of the Olaer Group, and a global player specialising in
More informationButterfly Valves. SECTION 8a. Tel: +44 (0) Fax: +44 (0)
SECTION a Butterfly Valves Tel: + ()195 7 ax: + ()195 7 Email: sales@hattersley.com export@hattersley.com www.hattersley.com Contents and Numerical Index Butterfly Valves Contents Page igure Number Index
More informationCatalog HY /US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI
Catalog HY15-351/US Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI PRESSURE RELIEVING AP1B2YP... 2G... Increase /Increase Current...5.3/1.4... 35/5... 7-8 AP2A2... C8-2... Increase
More informationP95H Regulator Applications P95H Part Matrix Specifi cations Materials of Construction P95H Flow Coeffi cients Wide Open Coeffi cients
PH Regulator Large Capacity Working Media Include ir, Steam and Liquids ll Vents are Tapped The PH is a direct operating pressure reducing regulator with large capacity. Ideally suited for uses in oil
More informationA range of cost saving solutions. Flowmeters &Monitors. Flowmeters &monitors
range of cost saving solutions Flowmeters &Monitors 29 Flowmeters &monitors LoFlow - and Flowmeters Easy to read, permanent printed scales. Large scale definition for precise measurement. Easy panel mounting
More informationNeedle Valves. Needle Valves Part Matrix. Flow Coefficient (C v ) belgas.net 1
Needle Valves elgs Standard Needle Valves offer four choices in 316 stainless steel as well as one piece forged carbon plated steel; soft seat and hard seat, angle and globe styles. The Mini Valve offers
More informationEHP2 Stainless steel piston accumulator
The Professional Choice in Fluid Management EHP2 Stainless steel piston accumulator 2 OILTECH EHP2 STAINLESS STEEL PISTON ACCUMULATOR Oiltech, a member of the Olaer Group, and a global player specialising
More informationHYDROSTATIC TEST SYSTEM MANUAL
PDQC HYDROSTATIC TEST SYSTEM MANUAL Technical Specification Operating Instructions Part List Revised 12-2016 Manual # PDQC- 6,000 And PDQC-10,000 1 PDQC PERFORMANCE DATA Model Number Maximum Pressure Volume
More informationCouplings - Quick Disconnect
ouplings - Quick isconnect Hydraulic - eneral Purpose... -1-3, -6 Hydraulic - Non Spill...-4-6 Pneumatic - eneral Purpose Manual onnect...-7-9 Pneumatic - eneral Purpose Push-to-onnect...-1-13 Industrial
More informationCatalog Hydraulic Couplings High Pressure
High Pressure 3 Series Threaded Actuation Design Threaded Sleeve The 3 Series coupling are designed for high pressure applications. The coupler sleeve and nipple body must be manually threaded together
More informationSOLENOID VALVES pilot operated, high flow, heavy duty single solenoid / dual solenoid 1/4 to 1
SONOI VVS pilot operated, high flow, heavy duty single solenoid / dual solenoid 1/4 to 1 TURS Rugged forged brass bodied solenoid valves (mono- or bistable function) designed to provide maximum flow Solenoid
More informationControl Valve Specifications
Control Valve Specifications Available in two-way, three-way and four-way configuration and with port sizes from 10-32UNF through to 1/2"NPT. The N2V & N3V1 offering is a direct acting solenoid poppet
More informationOIL FILLER AND AIR BREATHER FILLER CAPS
OIL FILLER ND IR RETHER FILLER CPS The complete series of oil filter and makes it possible to meet all market demands. Metal and plastic styles suitable for use on mobile equipment are available. s perform
More informationAdams. Progressive. Description. Typical system layout using Pneumatic Pump for grease - with monitoring. Typical system
45 P rogressive systems can be used for oil or grease lubrication when it is required to provide a positive displacement with visual or electrical monitoring. ll outlets can be checked by one indicator
More informationHigh Performance Repairable Pneumatic Cylinder Parker Hannifin Corporation
High Performance Repairable Pneumatic Cylinder 219 Pneumatic ivision eatures Optional Piston Magnet Located under wear band, piston magnet is used for through-thebarrel sensors for electronic piston position
More informationISO Wafer Check Valves. Full Port Lowest Pressure Drop. Maximizing the Flow
ISO 9001-2008 Wafer Check Valves Full Port Lowest Pressure Drop Maximizing the Flow Full Port Lowest Pressure Drop Quick Delivery Full Port, Lowest Pressure Drop Full Port Wafer Check Valves provide more
More informationMedium- and High-Pressure Fittings, Tubing, Valves, and Accessories
www.swagelok.com Medium- and High- Fittings, Tubing, Valves, and ccessories FK, FKB, IPT, and Sno-Trik Series Products Rated up to 60 000 psig (4134 bar) nd connections up to 1 1/2 and 12 mm NC MR0175/ISO15156
More informationNon-Spill Couplings zfc42 NS Series. Hydraulic Quick Couplings. B Hydraulics. Features. Applications. Note. Performance. Specifications B-20
Non-Spill ouplings zfc NS Series 8 7 pplications Non-Spill couplings by Parker are widely used in the public utility market where hydraulic oil spillage can constitute a serious safety hazard, particularly
More informationCast Iron Liquid Relief Valves
Cast Iron Liquid Relief Valves Features Bolted bonnet permits easy inspection and servicing without removal from system. Quality cast iron body and bonnet, insert and disc are available in either bronze
More informationCatalog HY /US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI
Catalog HY15-352/US Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI PRESSURE RELIEVING AP1B2YP... 2G... Increase /Increase Current...5.3/1.4... 35/5... 7-8 AP2B2YP... C8-2...
More informationTemperature Sensors. How to Order Consult factory for pricing and lead time. Normally Open (Closed on temperature rise)
Temperature Sensors 0916 Normally Open (losed on temperature rise) ontact Rating 6 MPS T 120 V 4 MPS T 240 V Voltage 0.1 to 240 volts or 12 VD 8 MPS, 24 VD 4 MPS Pressure 1,000 PSI operating Material 303
More informationSOLENOID VALVES pilot operated, high flow floating diaphragms 3/8 to 1
SOLNOI VLVS pilot operated, high flow floating diaphragms 3/8 to 1 N 3/2 P Series NO 316 TURS rass bodied high flow valves with two floating diaphragms for larger single actuators The solenoid valves vent
More informationApplications. T98H Part Matrix. Specifications. Spring Range. Materials of Construction. T98H Regulator Rebuild Kits. marshbellofram.
TH Back Regulator / Valve The TH monitors upstream pressure and opens to relieve excess pressure increases above setpoint. s a Back Regulator, the upstream pressure is monitored and released downstream
More informationA Series Piston Accumulators 250 & 350 bar accumulators with fluid volumes from 0.1 litres to 76 litres
Piston Accumulators & 350 bar accumulators with fluid volumes from 0. litres to 76 litres Catalogue HY07-240/UK October 2004 Catalogue HY07-240/UK Introduction Contents Page Accumulator Selection 2 Certification
More informationB e n t a x i s hydraulic motors MXP. Series
e n t a x i s hydraulic motors MXP Series Contents Definition and main applications of hydraulic motors, advantages of HYDRO LEDUC motors.............. 1 Operating conditions of motors... 2 Determining
More informationMedium- and High-Pressure Fittings, Tubing, Valves, and Accessories
Medium- and High- Fittings, Tubing, Valves, and ccessories 1 www.swagelok.com www.swagelok.com Medium- and High- Fittings, Tubing, Valves, and ccessories FK, FKB, IPT, CTB, and Sno-Trik Series Products
More informationBCV Blowdown Control Valves DN15 to DN50 (½" to 2")
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationQuick Coupling Diagnostic Products
Quick Coupling iagnostic Products F-1 Introduction Increasing productivity and profitability are the key elements for a company to successfully compete in the world market today. Reduced machine downtime
More informationAnodized Aluminum Manifolds
nodized luminum Manifolds These manifolds can t rust, they resist corrosion and cost less! Made from heavy-wall aluminum extrusions, tested to 120 psi. Standard manifolds have 1" or 1¹ ₂" process water
More informationHigh Speed Hydraulic Motors. Catalog HY /NA zm16 zm17
High Speed Hydraulic Motors Catalog HY13-20-0-001/NA zm16 zm17 223 Introduction High Speed Features High Starting Torque typically 90% of running torque. Smooth Output Torque throughout the entire speed
More informationMPS/MST SERIES SPIN - ON FILTER SUCTION - RETURN. Maximum working pressure 12 bar. Flow rates to 300 l/min
MPS/MST SERIES SPIN - ON FILTER SUCTION - RETURN Maximum working pressure 12 bar Flow rates to 3 l/min D e s c r i p t i o n MPS/MST The spin-on filter series is a complete product range suitable, for
More informationFHA 051 Working pressure 6000 psi
6 SRIS Working pressure 6000 psi Style S Style Style T Style D Style V Style Z D.I. 7 8 Technical data Filter body (Materials) Head: Steel (chemical heat treatment) Housing: Steel (chemical heat treatment)
More informationPneumatics Pneumatic Quick ouplings Single Shut-Off ouplings Single Shut-Off couplings are primarily used for pneumatic applications, connecting air t
Pneumatic Quick ouplings Pneumatics -1 Quick oupling ivision Pneumatics Pneumatic Quick ouplings Single Shut-Off ouplings Single Shut-Off couplings are primarily used for pneumatic applications, connecting
More informationMale - Swivel B-168. Female - Swivel. Female - Swivel B-170. Standpipe. Female - Swivel 90 Elbow - Long 3D082 B-172.
Visual Index 30182-166 31382-166 30282-167 37G82-167 NPTF Pipe Male - Rigid 30382-167 Male - Swivel 30682-168 Female - Rigid 33782-168 NPSM Pipe 33982-168 Gasket Joint 34182-168 JI 37 S Male - Rigid 30482-169
More information12CS/50CS Series. Coreless Spin-on Filters
12CS/5CS Series Coreless Spin-on Filters 65 12CS/5CS Series Applications Together we can Preserve the environment. Minimize waste and promote energy efficiency. Achieve worldwide filtration solutions.
More informationBALANCED PRESSURE PROPORTIONING BLADDER TANK SYSTEM
BLNCD PRSSUR PROPORTIONING BLDDR TNK SYSTM Features ccurate Proportioning of Foam Concentrate into firewater stream to produce the optimum extinguishing solution Shell constructed of Steel complying to
More information2-port and 3-port valves with T-bypass PN 16
4 854 2-port valves 3-port valve with T-bypass CVTIX 2-port and 3-port valves with T-bypass PN 16 VVP45..S VMP45..S ronze CC499K valve body DN 10 and DN 15 k vs 0.63 2.5 m 3 /h Externally threaded connections
More informationLow Pressure Filters
MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM Hydraulic Symbol /80/85/160/180 MF 90/95/190/195 A A B B Features MF Filters are manufactured with an aluminum head. Choice of NPT, SAE straight
More informationWP4 All SS (SS 304) Pressure Gauge Bourdon type
pecial Features xternal zero adjustment (optional) tainless steel case & measuring system ocket directly welded to case Dry and liquid filled version tandard followed N 837- (for N 00, & 0 mm) C marking
More informationPipe Fittings 1/16 to 1 in. sizes 316 stainless steel, brass, and carbon steel NPT, ISO/BSP, and SAE threads
www.swagelok.com Pipe Fittings 1/16 to 1 sizes 316 stainless steel, brass, and carbon steel, /SP, and S threads 2 Pipe Fittings Contents Nipples Page 4 dapters, Gaskets Page 6 Reducing ushings, Reducers
More informationHigh Speed Hydraulic Motors
High Speed Hydraulic Motors Catalog HY13-20-0-001/NA C C225 Introduction High Speed Features High Starting Torque typically 90% of running torque. Smooth Output Torque throughout the entire speed range
More informationSpring Return and Double Acting Pneumatic Quarter-Turn Actuators For Output Torques to 27,624 lb.in. INTRODUCTION
VLVS & CONTROLS KYSTON PNUMTIC CTUTOR Spring Return and ouble cting Pneumatic Quarter-Turn ctuators For Output Torques to 27,624 lb.in. INTROUCTION For remote control of any quarter-turn application, including
More informationAir Actuated Stainless Ball Valves 2-Piece Stainless Steel, Full Port 1/4 to 2 NPT
ir ctuated Stainless all Valves 2-Piece Stainless Steel, ull Port 1/4 to 2 SRIS eatures Spring Return or ouble cting ctuators ull Port direct mount ISO5211 valve 316 stainless steel body, ball and stem
More informationSeries HB Solid Brass Cylinders
Series HB Solid Brass Cylinders For General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8,, Bores Magnetic piston available to operate Aurora stainless proximity
More informationFlow Control Valves Check Valves Gauge Control Valves. Colorflow Valves
Check Valves Gauge Control Valves Colorflow Valves Colorflow and Ball Valves Industrial Flow Control, Check, Gauge Control Catalog HY14-3300/US Colorflow and Ball Valves Fully guided poppets are used on
More informationRPP Medium range pressure switches
RPP Medium range pressure switches ll industrial environments ll fluids One or two thresholds ll stainless steel version for aggressive environments French lectricity Generating Board (F) electronuclear
More informationDiscrete direct acting 2 port solenoid valve (general purpose valve) AB31 AB41 Series NC (normally closed) type AB42 Series NO (normally open) type
31414 Series iscrete direct acting port solenoid valve (general purpose valve) 31 41 Series NC (normally closed) type 4 Series NO (normally open) type Port size: Rc1/8 to Rc1/ JIS symbol Common specifications
More informationSOLENOID VALVES no voltage release (lever type) manual reset construction 3/8 to 1
SOLNOI VLVS no voltage release (lever type) manual reset construction 3/8 to N NO 3 2 3/2 Series 308 TURS Lever type Manual Reset function which means that the valve has to be energized as well as manually
More informationOdor Removal Filter. Model. Note) 1 8, , , , 3 4. Model/Free Standing Type AMF (2B)JIS 10K FF flange
fficiently can remove odor in compressed air with an activated carbon element. The unit is designed for use in the area such as a clean room where odors must be avoided. an remove odor and gas ingredients
More informationAN ISO 9001 : 2008 COMPANY SWING CHECK VALVE. Get the edge in process control. Butterfly Valves India Pvt. Ltd.
N ISO 9001 : 2008 COMPNY SWING CHECK VLVE Get the edge in process control utterfly Valves India Pvt. Ltd. Introduction Hi-TECH Manufacturing Programme Valve Type End SME 2 2½ 3 4 5 6 8 10 12 14 16 18 20
More informationMANIFOLDS VALVE. Mfg & Exp. : Valves & Fittings. A Trusted Name in Valves and Fittings ISO 9001:2008 COMPANY. Catalogue No.
A Trusted Name in Valves and Fittings Mfg & Exp. : Valves & Fittings MANIFOLDS VALVE ISO 9001:2008 COMPANY Pressure Ratings: 6,000 PSI/10,000 PSI NPT, ISO/BSP, Threads 2-,3- and 5-valves Instrument manifolds
More informationCourtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)
Features MF Filters are manufactured with an aluminum head. MF, MFD, MFDS Series Spin-On Filters Choice of NPT, SAE straight thread O-ring boss, BSPP, and SAE 4-bolt flange porting to allow easy installation
More informationInstrument Valves & Manifolds
Instrument Valves & Manifolds WY MNIFOLS Instrument valves & manifolds OVRVIW 2 STV offers a broad line of 1,2,3,4 and 5 instrument manifolds-all available in a wide range of materials and fully compatible
More information