Cast Iron Liquid Relief Valves
|
|
|
- Samson Hutchinson
- 5 years ago
- Views:
Transcription
1 Cast Iron Liquid Relief Valves Features Bolted bonnet permits easy inspection and servicing without removal from system. Quality cast iron body and bonnet, insert and disc are available in either bronze or SS and lapped for optimum performance. Springs are steel with plating for corrosion protection. High lift, wing-guided disc offers high relieving capacity. Pivot between disc and spring corrects misalignment and compensates for spring side thrust. Model Descriptions Model 91: Bronze trim, with pressuretight cap. Suitable for maximum back pressure of 0 psig. Variation 0 for field adjustability. Model 18: Bronze trim, UL and FM approved for fire pump installations. Special design offers minimum set pressure of 0 psig. Easily adjustable with handwheel to 00 psig (17 psig with optional 1# inlet flange). Model 8: Bronze trim, with pressuretight cap. UL and FM approved for fire pump installations. Suitable for maximum back pressure of 0 psig. Supplied with handwheel. Applications Fire Pump Service, UL and FM approved. (Models 18, 8) Overpressure relief and protection of pumps, tanks, lines and hydraulic systems. Pressure regulation. Options SS trim. (insert and disc) (Variation 0) Female x Female NPT connections. (1 1 /-inch through -inch sizes) Inlet and outlet flanges per ANSI B1.1, 1-inch - 1#. Limited to 17 psig maximum set pressure. Model 8 Pressure and Temperature Limits 1 Model 91: to 00 psig; -0 to 0 F Models 18, 8: 0 to 00 psig; -0 to 0 F Furnished standard with ANSI rated B1.1-0# inlet flange and ANSI rated B1.1-1# outlet flange. Note 1. For other pressure and temperature limits, consult ANSI B1 cast iron flange standards. Flow Control Kunkle is either a trademark or registered trademark of Tyco International Services AG or its affiliates in the United States and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Total Flow Control Solutions Copyright 00 Tyco Flow Control. All rights reserved. -US-00
2 Parts and Materials Model 91, - Non-code, Liquid Relief Valve No. Part Name Materials 1 Body Iron, A1 Class A or B O-ring BUNA-N Insert 1 Disc 1 Spring Step Spring Steel, Aluminum Coated 7 Bonnet Gasket Fiber and Nitrile, Klinger C-00 or C-01 8 Hex Head Cap Screw Steel, SAE Gr. 9 Bonnet Iron, A1 Class A or B 10 Cap Gasket Fiber and Nitrile, Klinger C-00 or C Compression Screw Bushing Iron, A Jam Nut 1 Compression Screw 1 Cap Iron, A1 Class A or B 1 Socket Set Screw Steel, Commercial 1 Stem Items not shown Handwheel Handwheel Jam Nut Iron, A1 Class A or B Steel Plated, Commercial 1 Model 91 Notes 1. Disc (item ) and insert (item ) material Bronze, B-8 Alloy 800 or B, also available in SS, A7 Gr. CF-8, as a package option.. Material CS with corrosion preventative coating, commercial Gr. or Brass, B1.. bolts required for - and -inch sizes, and 8 bolts required for -inch size.. Material Brass, B1 or Bronze, B8 casting.. Handwheel option available, delete cap (item 1) and gasket (item 10).. Inlet and outlet flanges per ANSI B1.1 0#, inlet flange standard and 1# inlet flange optional. Outlet flange 1#. Copyright 00 Tyco Flow Control. All rights reserved.
3 Parts and Materials Models 18 and 8 - Non-code No. Part Name Materials 1 Body 1 Iron, A1 Class A or B O-ring BUNA-N Insert Disc Spring Step Spring Steel, Aluminum Coated 7 Bonnet Gasket Fiber and Nitrile, Klinger C-00 or C-01 8 Hex Head Cap Screw Steel, SAE Gr. 9 Bonnet Iron, A1 Class A or B 10 Compression Screw Bushing Brass, B1 11 Jam Nut Brass, B1 1 Compression Screw 1 Handwheel Iron, A1 Class A or B 1 Handwheel Locknut Steel Plated, Commercial Gr. 1 Spring Pin Steel, Commercial Gr. 1 Socket Set Screw Steel, Commercial Gr. 17 Stem Compression Screw Locknut Wrench Installation Instruction Steel, A Paper, Commercial Gr Model 18 Model 8 only 18 Cap 7 Iron, A1 Class A or B 19 Cap Gasket 7 Gasket, Klinger Silicone C Notes 1. Inlet and outlet flanges per ANSI B1.1 0#, inlet flange standard and 1# inlet flange optional. Outlet flange 1#.. Disc (item ) and insert (item ) material Bronze, B-8 Alloy 800 or B, also available in SS, A7 Gr. CF-8, as a package option.. Material CS with corrosion preventative coating, commercial Gr., Brass, B1 or SS, A8 TY 1.. bolts required for - and -inch sizes, and 8 bolts required for -inch size.. Material Brass, B1 or Bronze, B8 casting (Model 18 only), B8 Alloy 800 (Model 8 only).. Not shown on assembly. 7. Cap (item 18), Gasket (item 19) and Locknut (item 11) factory installed. Handwheel (item 1) shipped unassembled (Models 18 and 8). 1 Model 8 Copyright 00 Tyco Flow Control. All rights reserved.
4 Specifications Model 91 1 Model Valve Connections Valve Dimensions Min/Max Approx. Number Size ANSI Standard in Set Pressure Weight (in) Inlet Outlet A B C (psig) (lb) 091A-G 1 1 / x 1 1 / Female NPT Female NPT / 1 / 11 7 /8 / H-G 1 1 / x 1 1 / 1# Flange 1# Flange / 1 / 11 1 / /17 091K-G 1 1 / x 1 1 / 0# Flange 1# Flange / 11 1 / /00 091A-H x Female NPT Female NPT 1 /8 1 /8 1 / /00 091H-H x 1# Flange 1# Flange / /8 1 / / K-H x 0# Flange 1# Flange /8 1 / / A-J 1 / x 1 / Female NPT Female NPT 1 / 1 / 1 1 / / H-J 1 / x 1 / 1# Flange 1# Flange 1 / / 1 1 / /17 091K-J 1 / x 1 / 0# Flange 1# Flange 1 / / 1 1 / /00 091A-K x Female NPT Female NPT 7 /8 7 /8 1 / H-K x 1# Flange 1# Flange 7 /8 7 /8 1 / / K-K x 0# Flange 1# Flange 1 / 7 /8 1 / / A-M x Female NPT Female NPT /8 1 / / H-M x 1# Flange 1# Flange /8 1 / / K-M x 0# Flange 1# Flange /8 1 / / H-P x 1# Flange 1# Flange 9 /8 8 1 / 1 / K-P x 0# Flange 1# Flange 9 /8 8 1 / 1 /00 0 Models 18 and 8 1 Model Valve Connections Valve Dimensions Min/Max Approx. Number Size ANSI Standard in Set Pressure Weight (in) Inlet Outlet A B C (18) C (8) (psig) (lb) *8A-K x Female NPT Female NPT 1 /8 7 /8 0 /8 1 /8 0/00 8 *8H-K x 1# Flange 1# Flange 1 /8 7 /8 0 /8 1 /8 0/ *8K-K x 0# Flange 1# Flange 1 /8 7 /8 0 /8 1 /8 0/ *8A-M x Female NPT Female NPT /8 1 / 0/00 1 *8H-M x 1# Flange 1# Flange /8 1 / 0/17 18 *8K-M x 0# Flange 1# Flange /8 1 / 0/00 18 *8H-P x 1# Flange 1# Flange 9 /8 8 1 / 0 1 0/17 0 *8K-P x 0# Flange 1# Flange 9 /8 8 1 / 0 1 0/00 0 Notes 1. Temperature limits -0 F to 0 F.. Replace asterisk with desired model number. Data applicable to Models 18, 8. C C A A B Model 91 Models 18, 8 B Copyright 00 Tyco Flow Control. All rights reserved.
5 Capacities Liquid Overpressure Factors To determine capacities at other than % overpressure/accumulation, multiply capacity shown by: 10% Acc. = 0. 1% Acc. = 0.8 0% Acc. = 0.9 Models 18, 8 Capacities Note UL/FM Certified Capacities 1 Size, in GPM x 00 x 1000 x Rated at 100 psig set pressure and % accumulation 1 psig. Non-code Liquid - % Accumulation (GPM) Set Pressure Inlet Size (psig) 1 1 / 1 / Copyright 00 Tyco Flow Control. All rights reserved.
6 Model Number/Order Guide Model Number Position Example K M 0 1 A M S Model Connection Model A - Female x Female NPT H - 1# Flange x 1# Flange K - 0# Flange x 1# Flange Inlet Size G /-inch H - -inch J - 1 /-inch K - -inch M - -inch P - -inch Variation (01 through 99) 01 - Catalog standard 0 - SS seat and disc 0 - Model 91 w/handwheel (K, M and P inlet only) 1 - Viton O-ring - Viton O-ring with SS seat and disc Design Revision Indicates non-interchangeable revision. Current Design at Revision A. Valve Service M - Liquid Spring Material C - Aluminum Painted, ASTM A1 Steel (G, H, J inlet sizes only) S - Aluminum Painted, ASTM A9 Steel (K, M, P inlet sizes only) Set Pressure psig psig Note 1. Viton is a registered trademark of DuPont Dow Elastomers. Facility Phone: Tyco Valves & Controls Tyco Flow Control (TFC) provides the information herein in good faith but makes no representation as to its comprehensiveness or accuracy. This data sheet is intended only as a guide to TFC products and services. Individuals using this data sheet must exercise their independent judgment in evaluating product selection and determining product appropriateness for their particular purpose and system requirements. TFC MAKES NO REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THE INFORMATION SET FORTH HEREIN OR THE PRODUCT(S) TO WHICH THE INFORMATION REFERS. ACCORDINGLY, TFC WILL NOT BE RESPONSIBLE FOR DAMAGES (OF ANY KIND OR NATURE, INCLUDING INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES) RESULTING FROM THE USE OF OR RELIANCE UPON THIS INFORMATION. Patents and Patents Pending in the U.S. and foreign countries. Tyco reserves the right to change product designs and specifications without notice. Copyright 00 Tyco Flow Control. All rights reserved.
Model descriptions. 2. For other pressure and temperature limits, consult ANSI B16 cast iron flange standards.
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Cast Iron Liquid Relief Valves Model 228 Model descriptions Model 91: Bronze trim, with pressure-tight cap. Suitable for maximum back pressure of 60
Kunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 228 Features Bolted bonnet allows easy inspection and servicing without removal from
Kunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 8 Features Bolted bonnet allows easy inspection and servicing without removal from
Model descriptions. Technical data. Pressure and Temperature Limits Models 19, 20, 20P: -60 to 406 F Models 19M, 20M, 20MP:
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Non-code Bronze Liquid Relief Valves Model descriptions Model 20 Model 19: All bronze, equipped with handwheel for easy adjustment within spring ranges.
KUNKLE MODELS 19/19M/20/20M/20P/20MP/200A/200H LIQUID RELIEF VALVES SAFETY AND RELIEF PRODUCTS
Extra-heavy rugged construction non-code bronze liquid relief valves with a variety of model options to meet specific applications FEATURES Inlet and outlet connections cast integral with body for easy
Kunkle Safety and Relief Products. Series 6000
ASME Section I and VIII, Steam, V and UV, ASME Section VIII, Air/Gas UV National Board Certified. Models 6933, 6934, and 6935 are ASME Section IV, Steam, HV National Board Certified. PED Certified for
Kunkle Safety and Relief Products
ASME Section I and VIII, Steam, V and UV, ASME Section VIII, Air/Gas UV National Board Certified. Models 6933, 6934, and 6935 are ASME Section IV, Steam, HV National Board Certified. PED Certified for
Safety and Relief Valves Product Overview
Safety and Relief Valves Product Overview Kunkle Valve is a leading supplier of Safety and Relief Valve Products for industrial and commercial applications, such as steam boilers, air, or non-hazardous
61W - Wafer style resilient seated butterfly valves 61L - Lugged style resilient seated butterfly valves
61W - Wafer style resilient seated butterfly valves 61L - Lugged style resilient seated butterfly valves Features Rounded polished disc edge gives full concentric sealing, lower torques, longer seat life
Crosby Style JQ Pressure Relief Device. Flow Control
Designed in collaboration with the, Inc. the Crosby JQ is designed with internal parts completely isolated from corrosive fluids and environments. The Crosby Style JQ pressure relief device was designed
Double door, spring loaded, wafer check valve designed to protect your gas or liquid piping systems.
Double door, spring loaded, wafer check valve designed to protect your gas or liquid piping systems. Features Light weight, versatile design, 80 to 90% lighter than conventional full-body check valves.
Anderson Greenwood Series 5100 Pilot Operated Pressure Relief Valves
ANDERSON GREENWOOD Series 5100 Modulating Safety Relief Valve Anderson Greenwood has developed the revolutionary Series 5100 specifically to serve Economizer applications requiring pressure relief under
Anderson Greenwood MLCP. Modulating Large Capacity Pilot Valve
ANDERSON GREENWOOD A simple, high performance and cost effective pilot operated valve. Introduction The Anderson Greenwood MLCP () is one of the first internal sensed pilot operated pressure relief valves
Direct contact, metal-to-metal seating, make the gate valve ideal for most shut-off applications. Class 800 ANSI.
Direct contact, metal-to-metal seating, make the gate valve ideal for most shut-off applications. Class 800 ANSI. Features Two inch and smaller valves are available with threaded or socket weld ends as
Cash Valve. Type G-60. High Capacity Pressure Regulator. Flow Control. Issued - February 2001 CAVMC-0511-US-0609 ISO 9001 Certified
Cash Valve Type G-60 High Capacity Pressure Regulator Issued - February 2001 CAVMC-0511-US-0609 ISO 9001 Certified Flow Control Type G-60 High Capacity Pressure Reducing And Regulating Valve Description
Double block and bleed style stainless steel butterfly valve sizes 1" to 6" [25 mm to 150 mm]. F250D for imperial tubing F251D for metric tubing
![Double block and bleed style stainless steel butterfly valve sizes 1 to 6 [25 mm to 150 mm]. F250D for imperial tubing F251D for metric tubing](/thumbs/86/94868754.jpg "Double block and bleed style stainless steel butterfly valve sizes 1 to 6 [25 mm to 150 mm]. F250D for imperial tubing F251D for metric tubing")
Features Keystone proven valve and actuator technology. Failsafe pneumatic interlocks. Fully machined 316L or 304L stainless steel body. Linkage driven, with only one actuator required. Linkage safety
Cash Valve. A Series. Pressure Regulators. Flow Control. Issued - January 2001 CAVMC-0508-US-0609 ISO 9001 Certified
Cash Valve A Series Pressure Regulators Issued - January 2001 CAVMC-0508-US-0609 ISO 9001 Certified Flow Control A Series - General Information Type A series pressure reducing and regulating valves automatically
Spring return pneumatic quarter-turn actuator for spring end torques to 685,500 lb.in.
Algas Spring Return Pneumatic Actuator Scotch Yoke Design Spring return pneumatic quarter-turn actuator for spring end torques to 685,500 lb.in. Features and benefits Scotch yoke design generates high
Models 910, 911, 916, 917, 920, 921, 927 ASME Section VIII, Air/Gas/
Models 910, 911, 916, 917, 920, 921, 927 ASME Section VIII, Air/Gas/ Steam/Liquid, UV National Board Certified. Also available for Vacuum Service Model 921: Steel body and bonnet with plain lift lever
ANDERSON GREENWOOD. Flow Control. Anderson Greenwood Tank and Equipment Blanketing Systems. Pad Valves. De-Pad Valves. Total Flow Control Solutions
ANDERSON GREENWOOD The Complete Blanketing and Safety Valve System! Anderson Greenwood is truly the world leader in tank protection and blanketing. Anderson Greenwood has the experience and products to
310 Wafer high performance butterfly valve 312 Lugged high performance butterfly valve
310 Wafer high performance butterfly valve 312 Lugged high performance butterfly valve Features and Benefits Uninterrupted gasket surfaces help eliminate problems associated with seat retaining screws
Models 912, 913, 918, 919 ASME Section VIII, Steam/Air/Gas/Liquid, UV National Board Certified. Also available for Vacuum Service.
Models 912, 913, 918, 919 ASME Section VIII, Steam/Air/Gas/Liquid, UV National Board Certified. Also available for Vacuum Service. Pressure and Temperature Limits Models 912, 913, 918, 919 Steam 3 to 250
Model descriptions. Technical data. Pressure and Temperature Limits Model 6252: 10 to 250 psig [0.7 to 17.2 barg] -20 to 406 F [-28 to 208 C]
![Model descriptions. Technical data. Pressure and Temperature Limits Model 6252: 10 to 250 psig [0.7 to 17.2 barg] -20 to 406 F [-28 to 208 C]](/thumbs/76/73640006.jpg "Model descriptions. Technical data. Pressure and Temperature Limits Model 6252: 10 to 250 psig [0.7 to 17.2 barg] -20 to 406 F [-28 to 208 C]")
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS ASME Section I Steam and ASME Section VIII, Air, Steam and Gas UV National Board Certified. Model 6254 ASME Section IV HV, National Board Certified.
ANDERSON GREENWOOD. Before installation these instructions must be fully read and understood.
ANDERSON GREENWOOD Before installation these instructions must be fully read and understood. 1.1 General The Anderson Greenwood Series 200 Pilot Operated SRV uses the principle of pressurizing the larger
Keystone Hygienic Products Figure 267J/268J (Reversible) Single Seal Piston Valves
The figure 267J and 268J valves are single seal piston valves, used to control process or C.I.P. fluids. F267J for isolating. F268J for diverting or converging flows. Features Product contact parts are
Prince Wafer Swing Check Valves Sizes 2 thru 36
Prince Wafer Swing Check Valves Features and Benefits Minimizes piping support with the compact wafer style body. The Prince wafer check valves are two to three times lighter than traditional full-bodied
Crosby Series 800 and 900 OMNI-TRIM Pressure Relief Valves. Flow Control
Crosby s Series 800 adjustable blowdown and Series 900 fixed blowdown OMNI-TRIM full nozzle pressure relief valves have a simplified, single trim design with superior application versatility. Features
KunKle SAFETY AND RELIEF VALVE PRODUCTS OVERVIEW
KunKle SAFETY AND RELIEF VALVE PRODUCTS OVERVIEW ISSUED NOVEMBER 2012 KunKle SAFETY AND RELIEF VALVE PRODUCTS OVERVIEW Contents Models 1 and 2 Brass Safety Valves... 4 Models 19, 19M, 20, 20M, 20P, 20MP,
Crosby Series BP OMNI-TRIM Pressure Relief Valves for applications involving variable back pressure.
CROSBY Crosby Series BP OMNI-TRIM Pressure Relief Valves for applications involving variable back pressure. Features The balanced piston design offsets the effects of variable back pressure on valve set
KUNKLE Safety and Relief ValVe PRoductS overview
KUNKLE Safety and Relief ValVe PRoductS overview april 2015 KUNKLE Safety and Relief ValVe PRoductS overview Contents Models 1 and 2 Brass Safety Valves... 4 Models 19, 19M, 20, 20M, 20P, 20MP, 200A and
Kunkle Models 189/363/389 safety valves Safety and relief products
Heavy duty ASME Section VIII, air/gas cryogenic, UV, National Board certified safety valves Model 189 Features Heavy duty construction provides long service life. Unique three-piece disc assembly with
Kunkle Safety and Relief Products Models 6252 and 6254
ASME Section I Steam and ASME Section VIII, Air, Steam and Gas UV National Board Certified. Model 6254 ASME Section IV HV, National Board Certified. PED Certified for Non-Hazardous Gas. Features Heavy
A comprehensive range of pneumatic actuators, providing compact, reliable and economical powered operation for all types of quarter-turn valves.
A comprehensive range of pneumatic actuators, providing compact, reliable and economical powered operation for all types of quarter-turn valves. Features Direct mounting to all Keystone Butterfly Valves.
Flow Control. Before installation or maintenance, these instructions must be fully read and understood.
Before installation or maintenance, these instructions must be fully read and understood. Please read these instructions carefully. This symbol indicates important messages and safety instructions. Potentially
PDC Elastomer Lined Series 27 Butterfly Valve 2" thru 36" for 125/150 lb. Flanging
PDC Elastomer Lined Series 27 Butterfly Valve 2" thru 36" for 125/150 lb. Flanging General Description: The PDC "Elastomer Lined" series butterfly valves are available in both full lug and wafer styles.
Pressure Relief Valves Series. Consolidated Safety Valve
Pressure Relief Valves 1511 Series Consolidated Safety Valve Consolidated Type 1511 safety valves are designed for low pressure, steam heating boilers and steam generators as well as air service applications.
Consolidated* Valves 1511 Series Safety Valve
Technical Specifications Rev. B - 10/2018 Consolidated* Valves 1511 Series Safety Valve Offering proven, high-performance design for low-pressure, steam heating boilers and steam generators, as well as
A self-contained system, the 7100 Series ARC valve has a pressure reducing trim and is in-line repairable.
A self-contained system, the 7100 Series ARC has a pressure reducing trim and is in-line repairable. General Description The 7100 Series ARC Valve has been specifically designed and manufactured to meet
* Contact your sales representative for compliance to NACE MR or later requirements.
VALVES & CONTROLS crosby SERIES 00, 00 OMNI-TRIM, AND BP OMNI-TRIM Crosby s Series 00 adjustable blowdown, Series 00 fixed blowdown OMNI-TRIM, and BP OMNI-TRIM full nozzle pressure relief valves have a
394C. Series 6400/6600. Safety Valves for Power Boiler Service
394C Series 6400/6600 Safety Valves for Power Boiler Service Series 6400/6600 Designed with the user in mind, Series 6400 and 6600 safety valves represent the most advanced technology in valves designed
* Contact your sales representative for compliance to NACE MR or later requirements.
VALVES & CONTROLS crosby SERIES 800, 900 OMNI-TRIM, AND BP OMNI-TRIM Crosby s Series 800 adjustable blowdown, Series 900 fixed blowdown OMNI-TRIM, and BP OMNI-TRIM full nozzle pressure relief valves have
KINGSTON. Model 710. Side Outlet Safety Relief Valve. Manufacturing reliable industrial valves for industry since 1908.
KEst.1908 KINGSTON Manufacturing reliable industrial valves for industry since 1908. Model 710 Side Outlet Safety Relief Valve Storm Manufacturing Group, Inc. 23201 Normandie Ave., Torrance, CA 90501-5050
Spring loaded Thermal Relief Safety Valves, manufacturers standard Medium and high pressure
Series Thermal Relief Safety Valves Spring loaded Thermal Relief Safety Valves, manufacturers standard Medium and high pressure Applications The Sempell series provides a complete and comprehensive range
K-LOK Installation, Operation, Maintenance and Troubleshooting
K-LOK Installation, Operation, Maintenance and Troubleshooting General Suggested installation orientation is with valve shaft horizontal or inclined from vertical. Unless otherwise recommended by Tyco
197C. Valve Group. Series Farris Engineering Pressure Relief Valves
97 Valve Group Series 700 Farris Engineering Pressure Relief Valves Numbering System Selecting and specifying Farris pressure relief valves is simple using the numbering system that follows. Each digit
Designed for blow-off service in boiler systems with pressures of 3,206 psig.
Designed for blow-off service in boiler systems with pressures of 3,6 psig. General Description asic requirements for the design and use of blow-off valves are established by the SM Power oiler Code, Section
MILLCENTRIC FULL/100% POR T ECCENTRIC PLUG VALVE
ISO 9001 CERTIFIED MILLCENTRIC FULL/100% POR T ECCENTRIC PLUG VALVE Suggested Specifications The Milliken criteria of quality, reliability, safety and value are embodied in the Millcentric Eccentric valve,
RP-1350 Rev. 1. Parts List. Model 441-S Regulator. Parts List. Copyright 1999 Invensys Energy Metering
RP-1350 Rev. 1 Model 441-S Regulator Parts List Model 441-S Regulator Parts List Copyright 1999 Invensys Energy Metering DIAPHRAGM SIZE Nominal Inside Diameter A 7" Diaphragm 9 3 /4" 10" Diaphragm 13 1
67 Series Pressure Regulators
67 Series Pressure Regulators Fisher Controls November 1986 Bulletin The 67 Series small-volume regulators (figure 1) are typically used to provide constantly controlled reduced pressures to pneumatic
CLOW CANADA - M-67 HERITAGE BRIGADIER FIRE HYDRANT SPECIFICATION
CLOW CANADA - M-67 HERITAGE BRIGADIER FIRE HYDRANT SPECIFICATION TESTING AND DESIGN SPECIFICATIONS (PER AWWA C502 / NSF /ULC & FM) 1. Hydrant shall be manufactured in accordance with AWWA C502 latest revision
Morin Figure HP Actuator
1,500 psig Operating Pressure Rating Direct Gas/Hydraulic ctuators Ductile Iron/Stainless Steel Quarter-turn Double cting and Spring Return Models Features and enefits High pressure construction eliminates
ISO RESILIENT WEDGE GATE VALVE. Engineering Creative Solutions for Fluid Systems Since 1901
ISO RESILIENT WEDGE GATE VALVE Engineering Creative Solutions for Fluid Systems Since 1901 TABLE OF CONTENTS ISO RESILIENT WEDGE GATE VALVE Scope of Line...1 Features and Benefits...1 Suggested Specification...2
Model-1 Natural Gas Valves
Flanged End 285 Screwed Weld End Locking Devices KEROTEST Model-1 s Short Weld End Long Weld End Weld x Flange 500 / 740 Flanged End 500 / 740 Weld x Flange 285 Model-1 Short Weld End Standard Welding
Industrial Bronze and Iron Price List
Industrial Bronze and Iron Price List TABLE OF CONTENTS IBI-1017 Effective: October 2, 2017 Revised: 12/07/2017 Suggested list prices are subject to change without notification. Visit our Website for the
Pressure Relief Valves. 1541/1543 Series. Consolidated Safety Valve
Pressure Relief Valves 1541/1543 Series Consolidated Safety Valve Table of Contents Conversion Table 1541/1543.2 Features & Benefits 1541/1543.3 Applications 1541/1543.3 Scope of Design 1541/1543.4 Materials
GRINNELL Model B302 and Model BN302 Grooved End Butterfly Valves with Gear Operators or Lever-Lock Operators General Description
Technical Services -00- +-0--0 www.grinnell.com GRINNELL Model B0 and Model BN0 Grooved End Butterfly Valves with Gear Operators or Lever-Lock Operators General Description The GRINNELL Models B0 and BN0
Approved. Size L H. 3" (76mm) 9-1/2" (241mm) 5-51/64" (147mm) 46. 4" (102mm) 11-1/2" (292mm) 6-45/64" (170mm) 81
pproved. Model: SD-NRV200CV Flanged Ends The Flanged End Check Valves are made of Iron Body, Bolted Bonnet and Horizontal Swing, painted with standard color. Epoxy coated inside and outside to WW C550
KENNEDY VALVE KS-RW RESILIENT WEDGE VALVES
KENNEDY VALVE KS-RW RESILIENT WEDGE VALVES KENNEDY VALVE AWWA C515 Resilient Wedge Gate Valves Meet or Exceed the Requirements of AWWA Standard C515 UL-262/FM-1120/1130 ULC-Underwriters of Canada 2 1/2
Model descriptions. Applications
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Models 910, 911, 916 and 917 ASME Section VIII, Air/Gas/Steam/Liquid, UV National Board certified. Models 920, 921 and 927 ASME Section I Special use
516509_tabs 11/16/10 4:55 AM Page 1 FIRE HYDRANTS
Date Printed: November 2010 FIRE HYDRANTS or Tyton (6"),6, or 8" A EDDY FIRE HYDRANTS PARTS LIST WORKING PRESSURE: 150 PSI Note: Discontinued For Reference Only 350 PSI Working Pressure
January 2016 GLOBE VALVES MIXING & DIVERTING SERIES 8600 MODEL Previously manufactured by Dezurik and Honeywell
786.89 January 2016 GLOBE VALVES MIXING & DIVERTING SERIES 8600 MODEL 8900 Previously manufactured by Dezurik and Honeywell Description: The Nor East Series 8600 (mixing) and Series 8900 (diverting) cage
A-C Fire Pump. Fitting and Accessories A-C 100A
A-C Fire Pump Fitting and Accessories A-C 100A A-C Fire Pump Fitting and Accessories Table of Content Page Automatic Air Release Valve... 1 Suction And Discharge Gauge Assembly... 2 Casing Relief Valve...
P200 Pressure Regulator
P200 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges P202 has internal relief valve for overpressure protection The P200 series pressure regulator is a manual, direct acting,
Type 441 CATALOG. Flanged Safety Relief Valves. The-Safety-Valve.com
Type 441 Flanged Safety Relief Valves CATALOG The-Safety-Valve.com General Information LESER India Safety Relief Valves The safety valve Type 441 represents High capacity related to the safety valve size
Installation and Maintenance Instructions for Grinnell GRP Pneumatic Rack and Pinion Actuators
FLOW CONTROL for Introduction The Grinnell GRP Pneumatic Actuator is a compact, rack & pinion design, conforming to Grinnell standard or direct mount standards or EN ISO 5211 mounting configuration, depending
T200 Pressure Regulator
T200 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges T202 has internal relief valve for overpressure protection The T200 series pressure regulator is a manual, direct acting,
Industrial Bronze and Iron Price List
Industrial Bronze and Iron Price List TABLE OF CONTENTS IND-0217 Effective: February 1, 2017 Revised: 12/07/17 Suggested list prices are subject to change without notification. Visit our Website for the
Installation Operation and Maintenance Instructions Model Contents
Contents 1.0 General 1.1 Model Number........................... 2 1.2 Specifications............................ 2 1.3 Dimensions.............................. 3 Repair Kit Materials & Part Numbers........
Model DFLP Linear Actuator
Features Rugged Long Lasting Construction Dyna-Flo s expert CNC machining process and superior quality parts come together to make DFLP actuators a rugged, long lasting product. DFLP actuators are manufactured
Direct contact, metal-to-metal seating, make the gate valve ideal for most shutoff applications. Class 800 ANSI.
Direct contact, metal-to-metal seating, make the gate valve ideal for most shutoff applications. Class 800 ANSI. Features Two inch and smaller valves are available with threaded or socket weld ends as
P3M3H, P6M3H 3-VALVE HARD SEAT MANIFOLD
3-VALVE MANIFOLD 3/16 and 3/8 Bore 3-valve Manifold The 3-valve hard seat manifold designed for instrument calibration incorporates two shut-off valves and an equalizing valve in a single body. The manifold
9100 SERIES Flanged MERCER VALVE THINK...MERCER FIRST
9100 SERIES Flanged MERCER VALVE THINK...MERCER FIRST 9100 Series Product Overview The Mercer Valve 9100 Series Pressure Relief Valve is State of the Art in soft seat, high flow rate, pressure relieving
P3M5S, P4M5S, P6M5S 5-VALVE SOFT SEAT MANIFOLD
P3M5S, P4M5S, P6M5S 5-VALVE MANIFOLD GAS STYLE MANIFOLD 5-Valve Gas Style Manifold The 5-valve manifold features 2 isolation valves, 2 equalizer valves and 1 vent valve in a single body for isolation and
Industrial Bronze and Iron Price List
Industrial Bronze and Iron Price List TABLE OF CONTENTS IND-0718 Effective: July 2, 2018 Revised: 08/06/2018 Suggested list prices are subject to change without notification. Visit our Website for the
Industrial Bronze and Iron Price List
Industrial Bronze and Iron Price List IND-0318 Effective: March 1, 2018 Revised: 08/06/2018 Suggested list prices are subject to change without notification. Visit our Website for the most up-to-date product
Industrial Bronze and Iron Price List
Industrial Bronze and Iron Price List IND-0718 Effective: July 2, 2018 Revised: 09/24/2018 Suggested list prices are subject to change without notification. Visit our Website for the most up-to-date product
P200 Pressure Regulator
P200 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges P202 has internal relief valve for overpressure protection The P200 series pressure regulator is a manual, direct acting,
P200 Pressure Regulator
P200 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges P202 has internal relief valve for overpressure protection The P200 series pressure regulator is a manual, direct acting,
Index. Butterfly Valves
Dry Bulk - Chemical - Petroleum Dry Bulk - Chemical - Petroleum Nozzles Nozzles & Valves & Index Index Part No. Description Page Nozzles P- 202 Overwing Aircraft Refueling, Bronze 1 P- 2022 Overwing Aircraft
PRESSURE REDUCING CONTROL VALVE
PRESSURE REDUCING CONTROL VALVE 06/08 Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Reducing setpoint is adjustable 2 (AOS) X P/L Standard Components 1 Main
CAST STEEL FLANGED GATE, GLOBE, & CHECK VALVES.
CAST STEEL FLANGED GATE, GLOBE, & CHECK VALVES www.fnw.com Index Options & Accessories... 2 Standards... 2 Figure Number Matrix... 3 Pressure/Temperature Ratings... 3 Hydrostatic Test Pressures... 3 Carbon
Cash Valve B SERIES PRESSURE REGULATORS. ISSUED - JANUARY 1999 CAVMC-0509-US-0208 ISO 9001 Certified
Cash Valve B SERIES REGULATORS ISSUED - JANUARY 1999 CAVMC-09-US-0208 ISO 9001 Certified GENERAL INFORMATION / REGULATORS B SERIES VALVES DESCRIPTION The Cash Valve Series B pressure reducing and regulating
KUNKLE SERIES 6000 SAFETY VALVES SAFETY AND RELIEF PRODUCTS
Bronze safety valves to ASM section I and VIII, steam, V and UV ; section VIII, air/gas, UV National Board certified including models to ASM section IV, steam V. P certified for non-hazardous gas ATURS
Series Pressure Relief Valves 197C
Series 2700 Pressure Relief Valves 197C Table of Contents General Description...IFC Ordering Information & Numbering System...1 Bill of Materials-Conventional...2 Bill of Materials-Balanced Design...3
67C Series Instrument Supply Regulators
Instruction Manual Form 5469 67C Series March 2004 67C Series Instrument Supply Regulators W8438 W7412 TYPE 67CF FILTER REGULATOR WITH OPTIONAL GAUGE TYPE 67C OR 67CR REGULATOR Figure 1. Typical 67C Series
P99 Pressure Reducing Regulator
P99 Pressure Reducing Regulator Applications City / District gate operation Commercial buildings Boilers, furnace, oven Plant air service Features 5 Pilot choices for low to extra high pressure Up to 1,000
Safety and Relief Valves for Industrial and Commercial Applications.
Safety and Relief Valves for Industrial and Commercial Applications. Kunkle Safety and Relief Valve Products Overview Kunkle Safety and Relief Valve Products Overview Contents Models 1 and 2 Brass Safety
GRINNELL MODEL CB800 CIRCUIT BALANCING VALVE INSTALLATION & SETTING HANDBOOK
Technical Services 866-500-4768 +-40-78-8220 GRINNELL MODEL CB800 CIRCUIT BALANCING VALVE INSTALLATION & SETTING HANDBOOK AUGUST 20 IH-4500 Table of Contents Contents General Description.... 3 Dimensional
CASH VALVE B SERIES PRESSURE REGULATORS
Single seated, spring loaded, direct acting diaphragm-type pressure reducing and regulating valves for a broad range of services FEATURES Reduce high inlet pressures to lower outlet pressures within close
Specialty Products. Strainers. Check Valves. Butterfly Valves
Specialty Products Strainers Check Valves Butterfly Valves Effective Date: April 1, 2013 Trademarks: Viton is a trademark of DuPont Performance Elastomers, L.L.C. Teflon is a trademark of E. I du Pont
CASH VALVE SERIES FR BACK PRESSURE VALVES
Diaphragm actuated valves designed for either continuous or intermittent operation which provide accurate, repetitive pressure control FEATURES GENERAL APPLICATION For use on practically all fluids and
Crosby Style JQ pressure relief device
A combination pressure relief device designed with internal parts completely isolated from corrosive fluids and environments Features Designed in collaboration with the Chlorine Institute, Inc. Provides
MERCER VALVE SERIES Flanged THINK...MERCER FIRST MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY
9100 SERIES Flanged THINK...MERCER FIRST MERCER VALVE MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY 9100 Series Product Overview The Mercer Valve 9100 Series Pressure Relief Valve is State of the Art in
Model CV-1FR Grooved-End Riser Check Valves 2 Inch to 12 Inch (DN50 to DN300) General Description. Installation. Technical Data
Worldwide Contacts www.tyco-fire.com Model CV-FR Grooved-End Riser Check Valves Inch to Inch (DN0 to DN00) General Description The TYCO Model CV-FR Grooved- End Riser Check Valve is a compact and rugged
GD N (not shown) No Switches. GD N Grooved 2¹ ₂", 3", 4", 6", 8", 10"
300 PSI WWP UL/FM Butterfly Valves Designed for normally open position monitoring Elastomer Encapsulated Disc Accepts Internal Supervisory Switches Compatible with IPS Pipe 300 PSI/20.7 Bar Non-Shock Cold
Price List. Specialty Products / Strainers / Check Valves / Butterfly Valves. Effective July 2, MuellerSteam.com 2018 MUELLER PRICE LIST
2018 MUELLER PRICE LIST Price List Specialty Products / Strainers / Check Valves / Butterfly Valves Effective July 2, 2018 All prices supersede previous issues, are temporary and subject to change without
MODEL 5540 CONTENTS. Installation, Operation and Maintenance Instructions 1.0 GENERAL
Installation, Operation and Maintenance Instructions MODEL 5540 Sep 20 CONTENTS.0 GENERAL. Model Number---------------------------------------------------------------------------------------------------------------
Iron Check Valves Illustrated Index
Iron Check Valves Illustrated Index Iron Body Swing Check Valve Bronze Mounted or All Iron 125 lb. SWP 200 lb. CWP Iron Body Swing Check Valve Bronze Mounted 250 lb. SWP 500 lb. CWP Iron Body Silent Check
CASH VALVES TYPE G-4 PILOT OPERATED PRESSURE REDUCING REGULATOR FOR STEAM, AIR AND GASES
Self-actuating pilot operated pressure reducing valve handling air, gas, and steam and accurate to within 1 /2% up to 3" and 1% for larger sizes. Description The G-4 regulator is a self-actuating pilot
Ductile Iron, Jacketed Pumps: Catalog Section 1602 Cast Iron, Non-Jacketed Pumps: Catalog Section 1401 HL4126A
Page 1601.1 TABLE OF CONTENTS Features & Benefits...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Special Materials & Options