Non-Spill Couplings zfc42 NS Series. Hydraulic Quick Couplings. B Hydraulics. Features. Applications. Note. Performance. Specifications B-20

Transcription

1 Non-Spill ouplings zfc NS Series 8 7 pplications Non-Spill couplings by Parker are widely used in the public utility market where hydraulic oil spillage can constitute a serious safety hazard, particularly in overhead bucket hoists that are used for maintenance of high-voltage power transmission lines. These couplings are also used for quick change of hydraulic hand tools in the construction, railway maintenance and mining industries. They are also ideal for inplant use where excess oil spillage can create a hazard. Note Protective dust plugs and caps play a crucial role in the life of a quick coupling and no purchase of a hydraulic quick coupling is complete without the selection of an appropriate dust plug and cap. See pages noted in Table of ontents for dust plugs and caps for the Parker full line of hydraulic couplings. Performance Pressure rop in PSI NS Series (/8; /; /; ") Test Fluid: Oil - 00 SUS /8" Flow in USGPM /" /" " Features. Positive valve stop. The perch maintains valve alignment and provides metal to metal valve stop to ensure that the valves open fully, every time.. aptive valve seal assures bubble tight poppet sealing. The valve seal is positively captured by the metal poppet to minimize seal washout or damage from high velocity fluid.. Hardened nipples and sleeves and solid barstock construction make for a quality coupling with maximum resistance to damage from hydraulic and mechanical shock.. The seal is designed to withstand high pressures and provide reliable sealing. /" and above sizes feature teflon back-up rings that support mating seals for high pressure applications.. urable ball-locking assure reliable connection, every time. large number of locking balls distribute the work load evenly while providing alignment and swiveling action to reduce hose torque and prolong hose life. UTION: these products are not to be used as swivels, rotation under pressure will result in excessive and premature wear.. Female pipe (NPSF), S O-Ring oss and ritish pipe (SPF) are available as standard. 7. ry-isconnect Series couplings employ flush valving when connecting or disconnecting. This means that the valves are mated together so that only small amounts of fluid can be lost during disconnection or air included during reconnection. 8. Sleeve locking mechanism prevents accidental disconnection when the coupling is dragged along the ground. Sleeve is rotated to engage the lock. Specifications ody Size (in.) /8 / / Rated Pressure (PSI) Rated Flow (GPM) 0 Temperature Range (std seals) -0 to +0 F Spillage (ML) (max. per disconnect) ir Incl. (ML) (max. per disconnect) -0

2 Non-Spill ouplings NS Series ouplers ody Part imensions (in.) Size No. Thread Overall Hex Largest Wt. (L.) (in.) Steel Size Length Size iameter P/Piece /8 NS-7-FP /8-8 NPSF /8 NS-7-F G/8 SPP /8 NS-7-8FO /-UNF / NS-0-8FP /- NPSF / NS-0-8F G/ SPP / NS-0-FO 7/8-UNF / NS-7-FP /- NPSF / NS-7-F G/ SPP / NS-7-FO /-UN NS-0-FP - / NPSF NS-0-F G SPP NS-0-FO /-UN Nipples F G ody Part imensions (in.) Size No. Thread Overall xposed Hex Largest Wt. (L.) (in.) Steel Size Length Length Size iameter P/Piece F G /8 NS-7-FP /8-8 NPSF /8 NS-7-F G/8 SPP /8 NS-7-8FO /-UNF / NS-0-8FP /- NPSF / NS-0-8F G/ SPP / NS-0-FO 7/8-UNF / NS-7-FP /- NPSF / NS-7-F G/ SPP / NS-7-FO /-UN NS-0-FP - / NSPF NS-0-F G SPP NS-0-FO /-UN NPSF National Pipe Straight Fuel SPP ritish Standard Pipe Parallel Optional Seals Optional Seals Suffix* Flourocarbon thylene Propylene (PR) Neoprene 7 Perfluoroelastomer (Kalrez ) * See Ordering Information at end of Section. -

3 Non-Spill ouplings N Series (onnect-under-pressure) Features Flush valving on the male half. Recess valving on female half to guide in male. onnects with full pressure (,000 psi) on the male half, female half at zero pressure. Operating sequence: onnect the coupling halves (female must be at zero pressure). Pressurize the female half to open the male half poppet. Simple push-to-connect. Pull locking sleeve to disconnect. Steel construction with zinc chromate yellow finish. una-n Nitrile seals. Interchangeable with Parker standard NS-0 male half. Specifications ody Size (in.) / Rated Pressure (PSI) 00 Rated Flow (GPM) Temperature Range -0 to +0 F Spillage (ML).070 (max. per disconnect) ir Inclusion (ML).00 (max. per connect) pplications onstruction vehicles with various hydraulic operated attachments. Pressure frequently builds up in the disconnected attachment, making it difficult to re-connect. The solution is the N Series onnect-under-pressure oupling. Install the coupling Male Half on the attachment hose, and the coupling Female Half on the vehicle hose. Performance: NS Series (/8; /; /; ") Test Fluid: Oil - 00 SUS Note: Protective dust plugs and caps play a crucial role in the life of a quick coupling and no purchase of a hydraulic quick coupling is complete without the selection of an appropriate dust plug and cap. See pages noted in Table of ontents for dust plugs and caps for the Parker full line of hydraulic couplings. Pressure rop in PSI /8" /" /" " Flow in USGPM -

4 Non-Spill ouplings N Series (onnect-under-pressure) /" oupler ody Part imensions (in.) Size No. Thread Overall Hex Largest Wt. (L.) (in.) Steel Size Length Size iameter P/Piece / N-0-FO.87- UNF OR /" Nipple ody Part imensions (in.) Size No. Thread Overall Hex Largest Wt. (L.) (in.) Steel Size Length Size iameter P/Piece F / NS-0-FO.87- UNF OR F -

5 Non-Spill dapters pplications Parker Non-Spill dapters were designed due to the widespread use of several coupling types in the construction market. These adapters help the user adapt between poppet style couplings and non-spill type couplings. dapters are widely available with Parker F and FF Series to Parker 00 Series coupling connections. This product is especially useful where multiple hydraulic attachments are being used with skid steer loaders. Materials Of onstruction ody: Finish: Specifications Steel Zinc plated with yellow chromate finish ody Size (in.) / Rated Pressure (PSI) 000 Temperature Range -0 to + 0 F Rated Pressure S/S Rated Pressure FS/SF 00 Max Spillage Per isconnect (ml.).00 (Flush Face nd) Max ir Inclusion Upon onnect (ml.).070 (Flush Face nd) Performance Pressure rop in PSI F/FF to 00 dapter (/ " ) Test Fluid: Oil - SUS 00 /" Flow in USGPM dapters S-00 ody Part Thread Overall Hex Largest Size Number Size Length Size iameter / S-00 N / S-00 N S-00 / FS-00 N / SF-00 N.9..8 How To Order FS-00 dapter Part Number S 00 /" ody Size SF-00 Male Half of dapter F Series (ISO 08 Standard) F FF Series S 00 Series dapter Series Female Half of dapter F Series (ISO 08 Standard) F FF Series S 00 Series -

6 Non-Spill ouplings FF Series 7 pplications Parker FF Series couplings are widely used in the public utility market where hydraulic oil spillage can constitute a serious safety hazard, particularly in overhead bucket hoists that are used for maintenance of high-voltage power transmission lines. These couplings are also used for quick change of hydraulic tools in construction, railway maintenance and mining industries. The ease of cleaning makes them ideal for use in these types of hostile environments. Note: Protective dust plugs and caps play a crucial role in the life of a quick coupling and no purchase of a hydraulic quick coupling is complete without the selection of an appropriate dust plug and cap. See pages noted in Table of ontents for dust plugs and caps for the Parker full line of hydraulic couplings. Specifications ody Size (in.) / /8 / / Rated Pressure (PSI) Rated Flow (GPM) 8 0 Temperature Range -0 to + 0 F Spillage (ML) (max. per disconnect) ir Inclusion (ML) (max. per connect) Performance Pressure rop in PSI FF Series (/; /8; /; /; ") Test Fluid: Oil - 00 SUS /" /8" /" /" " Features 8. Sleeve locking mechanism is engaged by rotating sleeve after connection. It prevents accidental disconnection when, for example, the coupling is dragged along the ground during use.. Sleeve mechanism is designed to help prevent dirt from entering the internal mechanism and thus causing faulty operation when connecting or disconnecting. The sleeve covers the retaining ring and also incorporates a dust seal in the spring area.. Hardened nipples and sleeves and solid barstock construction make for a quality coupling with maximum resistance to damage from hydraulic and mechanical shock.. This nti-lowout FT seal is designed to prevent blowout or damage during severe service conditions.. urable ball-locking mechanism assures reliable connections, every time. large number of locking balls distributes the work load evenly while providing alignment and swiveling action to reduce hose torque and prolong hose life. UTION: These products are not to be used as swivels. Rotation under pressure will result in excessive and premature wear.. Female pipe (NPSF), ritish pipe (SPP) and S O-Ring oss are available as standard. 7. FF Series couplings employ flush valving when connecting or disconnecting. This means that the valves are mated together so that only small amounts of fluid can be lost during disconnection or air inclusion during reconnection. 8. The /8" size conforms to HTM (Hydraulic Tool Manufactures ssociation) standards. ll sizes incorporate flush face mating surfaces which greatly facilitate cleaning of the product when disconnected. HTM couplings (/8" only)-coupler and nipple are marked with a directional flow arrow as per specifications. However, couplings are bidirectional Flow in USGPM -

7 Non-Spill ouplings FF Series ouplers ody Part imensions (in.) Size No. Thread Overall Hex Largest Wt. (L.) (in.) Steel Size Length Size iameter P/Piece / FF--FP /-8 NPSF / FF--MP /-8 NPTF / FF--F0 9/-8 UNF /8 FF-7-FP /8-8 NPSF /8 FF-7-8FP /- NPSF /8 FF-7-F G/8 SPP /8 FF-7-8F G/ SPP /8 FF-7-8FO /- UNF / FF-0-8FP /- NPSF / FF-0-FO 7/8- UNF / FF-7-FP /- NPSF / FF-7-FO /- UNF FF-0-FP - /NPSF FF-0-FO /-UNF Nipples F G ody Part imensions (in.) Size No. Thread Overall xposed Hex Largest Wt. (L.) (in.) Steel Size Length Length Size iameter P/Piece F G / FF--FP* /-8 NPSF / FF--MP* /-8 NPTF / FF--F0* 9/-8 UNF /8 FF-7-FP* /8-8 NPSF /8 FF-7-8FP* /- NPSF /8 FF-7-F* G/8 SPP /8 FF-7-8F* G/ SPP /8 FF-7-8FO* /- UNF / FF-0-8FP* /- NPSF / FF-0-FO* 7/8- UNF / FF-7-FP* /- NPSF / FF-7-FO* /- UNF FF-0-FP* - /NPSF FF-0-FO* /-UNF * Includes nti blow-out seal (FT) as standard (9) NPSF National Pipe Straight Fuel SPP ritish Standard Pipe Parallel Optional Seals FF Series Repair Kits Optional Seals Suffix* Flourocarbon thylene Propylene (PR) Neoprene 7 Perfluoroelastomer (Kalrez ) * See Ordering Information at end of Section. Size /" Nipple /8" Nipple /" Nipple /" Nipple " Nipple /" oupler /8" oupler /" oupler /" oupler " oupler Part FF--KIT FF-7-KIT FF-0-KIT FF-7-KIT FF-0-KIT FF--KIT FF-7-KIT FF-0-KIT FF-7-KIT FF-0-KIT No. FF--KIT- FF-7-KIT- FF-0-KIT- FF-7-KIT- FF-0-KIT- FF--KIT- FF-7-KIT- FF-0-KIT- FF-7-KIT- FF-0-KIT- FF--KIT- FF-7-KIT- FF-0-KIT- FF-7-KIT- FF-0-KIT- FF--KIT- FF-7-KIT- FF-0-KIT- FF-7-KIT- FF-0-KIT- FF/FS--TOOL FF/FS-7-TOOL FF-0-TOOL FF-7-TOOL FF/FS-0-TOOL -

8 Non-Spill ouplings F Series Features Sealed spring cavity prevents dust collection and possible sleeve binding. Heat treated valve sleeve and poppet resist scratches and wear. rimped valve seal prevents seal washout. Hardened locking collar sleeve resists brinelling, avoids cracking and provides longer life. Large number of locking balls resists brinelling. oncealed lock ring prevents accidental removal. Yellow chromate zinc finish resists corrosion. Positive lock retaining ring will not wash out under high flow conditions. Induction hardened locking surface reduces wear and brinelling. nti-blowout Nitrile and FT nipple seal prevents damage and blow-out when connecting with residual pressure. pplications Parker F Series couplings were designed for the construction equipment market and are used extensively on skid steer loaders. The non-spill feature eliminates hydraulic spillage and air inclusion when connecting or disconnecting hydraulic attachments. The F Series is also ideal for many other applications where hydraulic spillage is a concern and global interchangeability with other manufacturers is important. ISO-08 Interchange. Materials Of onstruction ody: Finish: Valve: Seal: Steel Specifications Zinc plated with yellow chromate finish Flush face valving nti blow-out NR Nitrile with FT seal (male only) Performance Pressure rop cross Unit (PSI) F Series /" & /8" Test Fluid: Oil-00 SUS /" /8" ody Size (in.) / /8 Rated Pressure (PSI) 00 Temperature Range -0 to + 0 F Spillage (ML) (max. per disconnect) ir Inclusion (ML) (max. per connect) Rated Flow (GPM) Flow Rate (GPM) -7

9 Non-Spill ouplings F Series ouplers ody Part imensions (in.) Size No. Thread Overall Hex Largest Wt. (L.) (in.) Steel Size Length Size iameter P/Piece /" F-0-8FP* /- NPSF..8.8 /" F-0-FO* -/- UNF..8.8 /8" F--FO* -/- UNF.7..7 * Non Sleeve Lock available add NL to part number Nipples ody Part imensions (in.) Size No. Thread Overall xposed Hex Largest Wt. (L.) (in.) Steel Size Length Length Size iameter P/Piece F G /" F-0-8FP /- NPSF /" F-0-FO -/- UNF /8" F--FO -/- UNF G F -8

10 FM Series Non-Spill ouplings FM Series pplications Parker FM Series couplings are designed to meet the stringent design and pressure requirements of ISO 08. The FM modular design also facilitates wider variations in fitting options. Parker FM couplers are designed for use in the construction, utility and agricultural equipment markets. s with all Parker flush-face designs the non-spill feature eliminates hydraulic spillage and air inclusion when connecting or disconnecting hydraulic attachments. The FM Series is also ideal for many other applications where hydraulic spillage is a concern and global interchangeability with other manufacturers is important. Features Meets or exceeds ISO 08 specification design and test requirements Wider size variations and increased pressures over F couplers ISO-08 Interface for universal interchangeability Modular design for increased flexibility with fitting port options rinell relief on male half to increase life and resist wear Induction hardened locking surface to resist brinelling, damage and abuse Heat Treated components to resist scratches and wear Smooth flow path for low pressure drop Heavy locking collar to resist damage and abuse nti-blowout Nitrile and FT male half seal prevents damage and premature failure with residual system pressure Optional olor coding bands for system identification rimped valve seal prevents seal washout Steel guide to resist damage on breaker applications Push-to-connect locking mechanism Optional sleeve lock Pressure rop in PSI Materials of onstruction ody: Steel Finish: Zinc plated with yellow chromate finish Valve: Flush face valving Seal: nti blow-out NR Nitrile with FT seal (male only) Performance Flow in L/m Flow in USGPM FM - Series Test Fluid: Oil - 0 SUS Pressure rop in ar Specifications ody Size (in.) / /8 / /8 / Rated Pressure (PSI) Rated Flow (GPM) 0 0 Temperature Range (std.seals) -0 to +0 F Spillage (ML) (max. per disconnect) -9 8 Lewis Road Minneapolis, MN

11 FM Series Non-Spill ouplings FM Series ouplers ody Size Part Thread Overall Hex Largest Wt. (L) (in.)" Number* Size Length Size iameter P/Piece / FM--FP-NL.0-8 NPSF / FM--FO-NL.-8 UNF /8 FM-7-FP-NL.7-8 NPSF /8 FM-7-8FO-NL.70- UNF / FM-0-8FP-NL.00- NPSF / FM-0-8FO-NL.70- UNF / FM-0-MF-NL.87- UNF / FM-0-MS-NL.000- UNS / FM-0-MF-NL.87- UNF / FM-0-FO-NL.0- UN / FM-0-MF-NL.0- UN /8 FM--FO-NL.0- UN /8 FM--MF-NL.- UN /8 FM--MF-NL.- UN / FM-7-FP-NL.70- NPSF / FM-7-FO-NL.0- UN FM-0-FP-NL NPSF FM-0-FO-NL.- UN * Sleeve lock option available upon request. all for pricing and availability. Nipples ody Size Part Thread Overall Hex Largest Wt. (L) (in.)" Number Size Length Size iameter P/Piece / FM--FP.0-8 NPSF / FM--FO.-8 UNF /8 FM-7-FP.7-8 NPSF /8 FM-7-8FO.70- UNF / FM-0-8FP.00- NPSF / FM-0-8FO.70- UNF / FM-0-MF.87- UNF / FM-0-MS.000- UNS / FM-0-MF.87- UNF / FM-0-FO.0- UN / FM-0-MF.0- UN /8 FM--FO.0- UN /8 FM--MF.- UN /8 FM--MF.- UN / FM-7-FP.70- NPSF / FM-7-FO.0- UN FM-0-FP NPSF FM-0-FO.- UN Standard Port onfigurations FP - Female Pipe Thread MP - Male Pipe Thread FO - Female Straight Thread MF- ulkhead Male Flare MF - Male Flare MS - ulkhead Male Seal-lok Other Fitting Port onfigurations available upon request. - 8 Lewis Road Minneapolis, MN

12 Non-Spill ouplings F Series (onnect-under-pressure) escription F Series products operate slightly different from traditional non-spill couplings. With no pressure in the female coupler and up to 00 psi of trapped pressure in the male, begin to couple the mating halves. elay momentarily during connection to allow trapped pressure to equalize with the mating half before completing the connection. Performance Pressure rop In PSI 00 0 F Series Test Fluid: Oil - SUS 00 /8 / / pplications Parker F Series male coupling halves provide connectunder-pressure capability with up to 00 psi of trapped pressure in the male half and are ideal for applications where residual pressure makes reconnect difficult. Utilized primarily in the construction equipment market, F Series products are commonly found on hydraulic attachments used in skid steer applications. The F Series mates with the FF Series Parker interface. Features onnect-under-pressure Male Half Only Hardened Locking Surface Zinc Plated with Yellow hromate Finish nti lowout FT Seals Flush Face Valving Note: Protective dust plugs and caps play a crucial role in the life of a quick coupling and no purchase of a hydraulic quick coupling is complete without the selection of an appropriate dust plug and cap. See pages noted in Table of ontents for dust plugs and caps for the Parker full line of hydraulic couplings. Specifications ody Size (in.) /8 / / Rated Pressure (PSI) Rated onnect-under-pressure apability Rated Flow (GPM) Spillage (ML) (max. per disconnect) ir Inclusion (ML) (max. per connect) 0. 0 Flow in USGPM F 70 F 00 F 70 Nipples F G ody Part imensions (in.) Size No. Mating Thread Overall xposed Hex Largest Wt. (L.) (in.) Steel Half Size Length Length Size iameter P/Piece F G /8 F-7-FP FF-7 /8-8 NPSF /8 F-7-8FO* FF-7 /- UNF /8 F-7-8FP* FF-7 /- NPSF / F-0-8FP FF-0 /- NPSF.... / F-0-FO FF-0 7/8- UNF.... / F-7-FO FF-7 /- UNF / F-7-FP FF-7 /- NPSF

13 Non-Spill ouplings F Series (onnect-under-pressure) escription F Series products operate slightly different from traditional non-spill couplings. With no pressure in the female coupler and up to 00 psi of trapped pressure in the male, begin to couple the mating halves. elay momentarily during connection to allow trapped pressure to equalize with the mating half before completing the connection. Performance Pressure rop In PSI 00 0 F Series Test Fluid: Oil - SUS 00 pplications Parker F Series male coupling halves provide connectunder-pressure capability with up to 00 psi of trapped pressure in the male half and are ideal for applications where residual pressure makes reconnect difficult. Utilized primarily in the construction equipment market, F Series products are commonly found on hydraulic attachments used in skid steer applications. The F Series mates with the F Series uropean interface ISO 08 couplers. Features onnect-under-pressure Male Half Only Hardened Locking Surface Zinc Plated with Yellow hromate Finish nti lowout FT Seals Flush Face Valving Note: Protective dust plugs and caps play a crucial role in the life of a quick coupling and no purchase of a hydraulic quick coupling is complete without the selection of an appropriate dust plug and cap. See pages noted in Table of ontents for dust plugs and caps for the Parker full line of hydraulic couplings. Specifications ody Size (in.) / Rated Pressure (PSI) 00 Rated onnect-under-pressure apability 00 Rated Flow (GPM) Spillage (ML).00 (max. per disconnect) ir Inclusion (ML).070 (max. per connect) 0. 0 Flow in USGPM Nipples ody Part imensions (in.) Size No. Mating Thread Overall xposed Hex Largest Wt. (L.) (in.) Steel Half Size Length Length Size iameter P/Piece F G / F-0-8FP F-0 /- NPSF / F-0-FO F-0 7/8- UNF / F-0-FO F-0 /- UNF / F-7-FO FM-7 /- UNF G F -

14 Non-Spill ouplings FH Series Features,000 psi Operating Pressure (700 bar) Flush Face, Non-Spill Valving, oth Halves Simple Push-To-onnect Operation Sleeve-Lock To Prevent ccidental isconnect Non Interchangeable With Low Pressure Flush Face ouplings Meets HTM Performance nd imensional Specifications pplications Hydraulic rimpers, utters, Jacks, enders, lamps, Wedges Rescue quipment High Pressure Test quipment Parker FH Series high pressure couplings are an innovative product combining the advantages of a flush-face design with a highly technical performance of a rated pressure of,000 psi. For safety purposes, this product does not interchange with flush-face couplings having a lower pressure rating. Note: Protective dust plugs and caps play a crucial role in the life of a quick coupling and no purchase of a hydraulic quick coupling is complete without the selection of an appropriate dust plug and cap. See pages noted in Table of ontents for dust plugs and caps for the Parker full line of hydraulic couplings. Sleeve on coupler is red. Nipple is also red. Performance Pressure rop in PSI FH Series (/8") Specifications ody Size (in.) /8 Rated Pressure (PSI),000 Rated Flow (GPM) Temperature Range -0 to +0 F Spillage (ML).00 (max. per disconnect) ir Inclusion (ML).070 (max. per connect) Flow in USGPM -

15 Non-Spill ouplings FH Series ouplers ody Part imensions (in.) Size No. Thread Material Overall Wrench Largest Wt. (L.) (in.) Steel Size Length Flats iameter P/Piece /8 FH-7-FP /8 Female Pipe Steel.. Hex. 0. NPTF /8 FH-7-MP /8 Male Pipe Steel.8. Hex. 0. NPTF /8 FH-7-F /8 Female Steel.. Hex. 0. ritish Pipe Nipples F ody Part imensions (in.) Size No. Thread Material Overall Wrench Largest Wt. (L.) (in.) Steel Size Length Flats iameter P/Piece F /8 FH-7-FP /8 Female Pipe Steel..00 Hex. 0. NPTF /8 FH-7-F /8 Female Steel..00 Hex. 0.8 ritish Pipe -

16 Non-Spill ouplings FS Series pplications Parker FS Series couplings virtually eliminate fluid loss upon disconnection, and minimize air inclusion during connections. They are ideal for use where spillage may cause undesirable conditions or constitute a safety hazard. The FS Series couplings have double shut-off flush mating valves that are suitable for sealing off media in chemical processing, chemical dispensing, food processing, and other corrosive applications. Working pressures to 000 psi. Note: Protective dust plugs and caps play a crucial role in the life of a quick coupling and no purchase of a hydraulic quick coupling is complete without the selection of an appropriate dust plug and cap. See pages noted in Table of ontents for dust plugs and caps for the Parker full line of hydraulic couplings. Specifications Features Simple to operate: Push to connect, pull on knurled sleeve to disconnect. Flush face valves exhibit minimal spillage upon disconnect and minimal air inclusion upon connect. Superior locking ball design a large number of locking balls distribute the workload better and allow for some rotation between the male and female halves of the coupling under pressure. xcellent flow vs pressure drop characteristics when compared with other low spill quick couplings. Material construction is stainless steel with fluorocarbon seals as standard. Wide range of seal materials available. Repair kits available to replace critical elastomer seals (all sizes). oupling sealing integrity is approximately x - std. c /sec. Helium under 0 millitorr of vacuum. Materials of onstruction Machined Parts: Stainless Steel, ISI type Springs: Locking alls: ackup Washers: lastomer Seals: Stainless Steel, ISI type. /" - SS; /8" - " - Tungsten arbide Teflon Fluorocarbon is standard. Wide range is available. ody Size (in.) / /8 / / Rated Pressure (PSI) Rated Flow (GPM) 8 0 Spillage (ML) (max. per disconnect) ir Inclusion (ML) (max. per connect) Temperature Range (continuous) Part No. O Ring Temp F Seal Suffix ompound Rating None* Fluorocarbon -0 to 00 thylene Propylene (PR) - to 0 Nitrile (una-n ) -0 to 0 7 Perfluoroelastomer (Kalrez ) -0 to 00 *Flourocarbon is standard seal. Performance Flow ata Pressure rop in PSI /" FS Series (/; /8; /; /; ") Test Fluid: Water /8" /" /" " Flow in USGPM -

17 Non-Spill ouplings FS Series ouplers Female Pipe Thread ody Part Thread Overall Hex Largest Wt. (L.) Size (in.) No. Size Length Size iameter P/Piece /8 FS-7-FP /8-8 NPT / FS-0-8FP /- NPT / FS-7-FP /- NPT FS-0-FP - / NPT ody Part Thread Overall Hex Largest Wt. (L.) Size (in.) No. Size Length Size iameter P/Piece / FS--FP /-8 NPT Male Pipe Thread ody Part Thread Overall Hex Largest Wt. (L.) Size (in.) No. Size Length Size iameter P/Piece / FS--MP /-8 NPTF S Straight Thread ody Part Thread Overall Hex Largest Wt. (L.) Size (in.) No. Size Length Size iameter P/Piece / FS--FO 9/-8 UNF /8 FS-7-8FO /- UNF / FS-0-FO 7/8- UNF / FS-7-FO -/- UNF FS-0-FO -/- UNF

18 Non-Spill ouplings FS Series Nipples Female Pipe Thread G ody Part Thread Overall xposed Hex Largest Wt. (L.) Size (in.) No. Size Length Length Size iameter P/Piece F G /8 FS-7-FP /8-8 NPT / FS-0-8FP /- NPT / FS-7-FP /- NPT FS-0-FP - / NPT F ody Part Thread Overall Hex Largest Wt. (L.) Size (in.) No. Size Length Size iameter P/Piece F / FS--FP /-8 NPT F Male Pipe Thread ody Part Thread Overall Hex Largest Wt. (L.) Size (in.) No. Size Length Size iameter P/Piece F / FS--MP /-8 NPTF * enotes Male Pipe Thread F S Straight Thread ody Part Thread Overall Hex Largest Wt. (L.) Size (in.) No. Size Length Size iameter P/Piece F / FS--FO 9/-8 UNF /8 FS-7-8FO /- UNF / FS-0-FO 7/8- UNF / FS-7-FO -/- UNF FS-0-FO -/ UNF F -7

19 Non-Spill ouplings FS Series FS Series Repair Kits Repair kits are available for both coupler and nipple half of FS coupling. Kits include replacement elastomer seals, valve assembly and instructions to perform rebuild. Spline tool must be ordered separately to accomplish coupler half repair. Other tools required: Vise, llen Wrench and Open nd Wrench FS Repair Kits TOOL Spline tool for oupler (female half) Repair Replacement Seals thylene Propylene (PR) 7 Perfluoroelastomer (Kalrez ) No Suffix Fluorocarbon Seals Nipple Repair Kits Size /" Nipple /8" Nipple /" Nipple /" Nipple " Nipple Part FS--KIT FS-7-KIT FS-0-KIT FS-7-KIT FS-0-KIT No. FS--KIT- FS-7-KIT- FS-0-KIT- FS-7-KIT- FS-0-KIT- FS--KIT-7 FS-7-KIT-7 FS-0-KIT-7 FS-7-KIT-7 FS-0-KIT-7 oupler Repair Kits Size /" oupler /8" oupler /" oupler /" oupler " oupler FS--KIT FS-7-KIT FS-0-KIT FS-7-KIT FS-0-KIT Part FS--KIT- FS-7-KIT- FS-0-KIT- FS-7-KIT- FS-0-KIT- No. FS--KIT-7 FS-7-KIT-7 FS-0-KIT-7 FS-7-KIT-7 FS-0-KIT-7 FF/FS--TOOL FF/FS-7-TOOL FS-0-TOOL FF/FS7-TOOL FF/FS-0-TOOL -8

20 onnect Under Pressure ouplings 0 Series pplications Parker s 0 Series, thread-to-connect couplings can be used in a wide range of industrial applications where heavyduty couplings are required that can be connected under pressure, with little or no spillage. The 0 is ideal for connecting hydraulic lines on oil field equipment like power tongs, swivels and mobile drilling rigs. It is also widely used on dump trailers to connect the tractor to wet-line hydraulic systems. Other uses include: submersible pumps, engine test stands, and many other applications where high flow connect under pressure couplings are required. Note: Protective dust plugs and caps play a crucial role in the life of a quick coupling and no purchase of a hydraulic quick coupling is complete without the selection of an appropriate dust plug and cap. See pages noted in Table of ontents for dust plugs and caps for the Parker full line of hydraulic couplings. Specifications ody Size (in.) / / -/ -/ ash Number *Rated Pressure (PSI) Female Half Male Half omplete oupling ssembly Rated Flow (GPM) Temperature Range (std seals) -0 to +0 F. * Minimum burst pressure is equal to three times the rated pressure. Not recommended for continuous hydraulic impulse applications at rated pressures. Performance Pressure rop in PSI Series (/; /; ; /;/") Test Fluid: Oil - 00 SUS /" /" " /" /" Flow in USGPM -9

21 onnect Under Pressure ouplings 0 Series Features. The connection indicator, a Parker innovation, serves as a visual check for complete connection of the 0 coupling. It helps prevent premature failures and leaks. It assures that the connection is complete and the valves fully open, eliminating unnecessary flow restriction. (see drawing on next page). The Parker heavy-duty wing nut is ruggedly builtspecifically to withstand the hammer blows commonly used to tighten and loosen this coupler.. The heavy-duty flange is designed to give a positive noslip bulkhead mounting that will reduce downtime.. The bonded valve seal permits full pressure connect and disconnect without seal washout.. The flush face valve keeps air inclusion and spillage to a minimum.. orrosion resistant brass makes this coupling compatible with a broad range of media and provides versatility. 0 Series oupling with Wingnut ody Thread Part No. Part No. Overall Wt. (L.) Size Size With Without onnected P/Piece (in.) NPTF Flange Flange Length / / / / / / /- / / /- / ontact division for SPP port availability 0 Series oupling with Hex Nut ody Thread Part No. Part No. Overall Wt. (L.) Size Size With Without onnected P/Piece (in.) NPTF Flange Flange Length / / / / / / /- / / /- / ontact division for SPP port availability -0

22 onnect Under Pressure ouplings 0 Series ouplers Wing Nut ody Part Thread imensions (in.) Size No. Size Overall Wrench Wing Wt. (L.) (in.) rass NPTF Length Flats Nut P/Piece / -08 / / - / / / -0 /- / / - /- / ontact division for SPP port availability Hex Nut ody Part Thread imensions (in.) Size No. Size Overall Wrench Hex Wt. (L.) (in.) rass NPTF Length Flats Size P/Piece / -08 / / - / / / -0 /- / / - /- / ontact division for SPP port availability Nipples F G onnection Indicator Line Part No. ody Without With Thread imensions (in.) Size Flange Flange Size Overall Hex Wrench Wt. (L.) (in.) rass rass NPTF Length Size Flats P/Piece G F / / / - - / / / -0-0 /- / / - - /- / ontact division for SPP port availability Flanges G ody imensions (in.) Size Part No. olt Hole olt ircle (in.) Steel iameter iameter G H / 7-08 ( piece) ( piece).08.7 / 7-0 ( piece).08. / 7- ( piece).8.0 H -

23 General Purpose ouplings 800 Series Features Parker 800 Series couplings feature: Unique valve design permits connection while either or both the coupler and nipple are under pressure. ouble acting sleeve for one handed operation when coupler is clamp or bulkhead mounted. ritical parts are hardened for durability. ependable ball locking mechanism holds the mating halves together. ouplers and nipples are precision machined from solid bar stock. pplications The 800 Series brings to the industry a proven design for use on construction equipment, forestry equipment, agricultural machinery, oil tools, steel mill machinery, and other demanding hydraulic applications. Specifications ody Size (in.) / Rated Pressure (PSI) 00 Rated Flow (GPM) Temperature Range (std seals) -0 to +0 F Note: Protective dust plugs and caps play a crucial role in the life of a quick coupling and no purchase of a hydraulic quick coupling is complete without the selection of an appropriate dust plug and cap. See pages noted in Table of ontents for dust plugs and caps for the Parker full line of hydraulic couplings. Performance Series (/") Test Fluid: Oil - 00 SUS 0 Special Order Information Standard seal material is una-n (Nitrile), other seal options are available. See Ordering Information at end of Section and Fluid ompatibility hart at end of this catalog for assistance in making seal selection. Pressure rop in PSI /" Flow in USGPM -

24 General Purpose ouplings 800 Series ouplers Female Thread ody Part Thread Thread imensions (in.) Size No. Size Size Overall Wrench Largest Wt. (L.) (in.) Steel NPSF OR Length Flats iameter P/Piece */ 80- / */ 80- / */ 80-7/ * Push to connect Nipples Female Thread ody Part Thread Thread imensions (in.) Size No. Size Size Overall xposed Hex Largest Wt. (L.) (in.) Steel NPTF OR Length Length Size iameter P/Piece F G / 80- / / 80-P** / G / 80- / / 80-P** / / 80-7/ / 80-P** 7/ ** Poppet design F Replacement Parts Series ody Size (in.) Part Number escription Material / Q-Ring una-n -

25 onnect Under Pressure ouplings 900 Series 7 8 pplications The Parker 900 lever coupling is designed with a leveroperated cam that opens and closes the valves in both coupling halves, positively locking them into place. This allows the couplings to be easily connected and disconnected while under pressure. The 900 couplings can functionally replace a ouble Shut-Off quick coupling and two high pressure ball valves. y simply turning the lever to the closed position the hydraulic lines on a piece of machinery or mobile equipment may be disconnected either for maintenance or equipment changeovers. Note: Protective dust plugs and caps play a crucial role in the life of a quick coupling and no purchase of a hydraulic quick coupling is complete without the selection of an appropriate dust plug and cap. See pages noted in Table of ontents for dust plugs and caps for the Parker full line of hydraulic couplings. Performance Pressure rop in PSI Series (/") Test Fluid: Oil - 00 SUS Features. The lever operates a cam that mechanically locks both valves into either the open or closed position. losed, the flow is shut off at the coupler, allowing easy zero-pressure connect and disconnect. Open, the valves are locked in the open position in both the female body and male tip. In this position the valves are unaffected by hydraulic surges.. Parker design eliminates back flow-checking. The positive lock of the cam prevents hydraulic surges from forcing the valve closed, which avoids flow checking and disrupting equipment performance.. Valves close automatically if coupling is accidentally disconnected.. The 80 Series tip used with the 900 coupler is an industry standard that meets ISO, S, and S requirements.. Rugged, reliable ball valve and induction hardened locking ball groove prevent brinelling and prolong coupling life.. Turning the lever without the male tip in place will NOT result in oil flow. 7. The Lever oupler is covered by patent numbers: #809 and # New easy action sleeve aids connect and disconnect. Specifications ody Size (in.) / Rated Pressure (PSI) 00 Rated Flow (GPM) Temperature Range (std seals) -0 to +0 F Flow in USGPM -

26 onnect Under Pressure ouplings 900 Series ouplers ody Part Thread imensions (in.) Size No. Size Overall Wrench Largest Wt. (L.) (in.) Steel NPTF OR Length Flats iameter P/Piece */ 90-- / */ / */ 90-- / */ / **/ 90-9/ ** Mates with the /" 0 Series Nipples (see page.) * Mates with either the /" 80 nipples or the /" 00 Series nipples. Nipples ody Part Thread imensions (in.) Size No. Size Overall xposed Hex Largest Wt. (L.) (in.) Steel NPTF OR Length Length Size iameter P/Piece F G / 80- / / 80- / / 80-7/ G F Replacement Parts 900 Series ody Size (in.) / O-Rings - una N -N0-90 -

27 onnect Under Pressure ouplings 000 Series Features The Parker 000 Series coupling features: Two-piece coupler body that permits operation while one or both halves are under pressure as well as when there is no pressure in either half. onnect under pressure by unscrewing the valve body until two or three threads are visible. Nipple can be inserted and locked into the coupler without opening either valve. (Use a wrench to thread the valve body back into the coupler, the valves are opened against internal pressure. If internal pressure makes manual disconnect difficult, unscrewing the valve body from the coupler will permit the valves to close, thereby relieving internal pressure and allowing manual operation of the balllocking sleeve.) pplications The Parker 000 Series is an economical coupling that is a threaded union and can be connected under pressure with tools. For applications that require a coupling to be connected under-pressure and where tools can be used to make the connection, the 000 Series coupling should be considered. Performance Series (/") Test Fluid: Oil - 00 SUS 0 00 Note: Protective dust plugs and caps play a crucial role in the life of a quick coupling and no purchase of a hydraulic quick coupling is complete without the selection of an appropriate dust plug and cap. See pages noted in Table of ontents for dust plugs and caps for the Parker full line of hydraulic couplings. Specifications ody Size (in.) / Rated Pressure (PSI) 00 Rated Flow (GPM) Temperature Range (std seals) -0 to +0 F Pressure rop in PSI Flow in USGPM

28 onnect Under Pressure ouplings 000 Series oupler ody Part Thread imensions (in.) Size No. Size Overall Wrench Wrench Largest Wt. (L.) (in.) Steel NPTF Length Length Flats Flats iameter P/Piece / 00- / Nipple ody Part Thread imension (in.) Size No. Size Overall xposed Hex Largest Wt. (L.) (in.) Steel NPTF Length Length Size iameter P/Piece F G / 80- / G F Replacement Parts 000 Series ody Size (in.) / O-Rings - una N -N

29 High Pressure ouplings 00 Series pplications Parker 00 Series couplings with their threaded union locking system and precision ball-type check valves, are designed for extreme high pressure applications such as found on portable hydraulic rams. See pages noted in Table of ontents for dust plugs and caps for the Parker full line of hydraulic couplings. Note: Protective dust plugs and caps play a crucial role in the life of a quick coupling and no purchase of a hydraulic quick coupling is complete without the selection of an appropriate dust plug and cap. See pages noted in Table of ontents for hydraulic couplings dust plugs and caps for the full line of hydraulic couplings. Features. Machined from solid steel barstock for durability.. The 00 Series employs a threaded sleeve locking mechanism, mates with matching male threads on the nipple. The two halves must be manually threaded together for connection.. Hard, chrome alloy balls are used for valving. They are spring loaded for positive seating of the valve.. The valve provides a metal-to-metal seal between the ball and a coined seat.. The body seal is polyurethane which resists high pressure extrusion.. threaded valve retainer provides a valve stop that assures positive valve alignment. Specifications ody Size (in.) / /8 Rated Pressure (PSI) Static,000 Rated Flow (GPM) Temperature Range (std seals) - to +80 F Performance Series (/; /8") Test Fluid: Oil - 00 SUS 0 00 Pressure rop in PSI /" /8" Flow in USGPM -8

30 High Pressure ouplings 00 Series ouplers ody Thread imensions (in.) Size Part Size Overall Wrench Largest Wt. (L.) (in.) No. NPTF Length Flats iameter P/Piece / 0- / /8 0- / /8 0-- / (Female) Nipples ody Part Thread imensions (in.) Size No. Size Overall xpose Hex Largest Wt. (L.) (in.) Steel NPTF Length Length Size iameter P/Piece F G / - / /8 - / /8 -- / G F -9

31 High Pressure ouplings T Series Specifications ody Size (in.) /8 Rated Pressure (PSI),000 Rated Flow (GPM) Temperature Range (std seals) -0 to +00 F Performance Pressure rop in PSI T Series (/8") Test Fluid: Oil - 00 SUS Features Positive valve stop. The perch maintains valve alignment and provides metal to metal valve stop to insure that the valves open full every time. Precision machined valves with elastomeric seals provide for positive shut-off upon disconnection. Hardened nipples and sleeves and solid barstock construction make for a quality coupling with maximum resistance to damage from hydraulic and mechanical shock. urable ball-locking mechanism assures reliable connection every time. large number of locking balls distributes the work load evenly while providing alignment and swiveling action to reduce hose torque and prolong hose life. UTION: These products are not to be used as swivels, rotation under pressure will result in excessive and premature wear. Female pipe (NPSF) standard. The standard Flourocarbon seal is designed to withstand extremely high pressures and provide reliable sealing. Teflon back-up ring provides support for the seal in high pressure applications. Sleeve locking mechanism prevents accidental disconnection when the coupling is dragged along the ground. pplications Parker T series couplings are found in the construction, railway maintenance and house moving industries. Used on hydraulic jacking equipment, these couplers eliminate costly down time caused by improperly connected threaded types. For use where high pressure capability is required coupled with positive coupling action. onsiderably faster to use than threaded types Flow in USGPM Note: Protective dust plugs and caps play a crucial role in the life of a quick coupling and no purchase of a hydraulic quick coupling is complete without the selection of an appropriate dust plug and cap. See pages noted in Table of ontents for dust plugs and caps for the Parker full line of hydraulic couplings. oupler Nipple F G ody Fitting imensions (in.) Size Part Thread Overall Hex Largest Wt. (L.) (in.) No. Size Length Size iameter P/Piece /8 T-7 /8-8 NPSF ody Fitting imensions (in.) Size Part Thread Overall xposed Hex Largest Wt. (L.) (in.) No. Size Length Length Size iameter P/Piece F G /8 T-7 /8-8 NPSF NPSF National Pipe Straight Fuel -0

32 High Pressure ouplings Series Features Stainless steel body. rass locking sleeve Polyurethane seals to resist extrusion and abrasion. Self locking threads help prevent adapter or sleeve from being loosened by vibrations. Visual makeup when fully coupled the edge of the sleeve will be flush with the end of the male thread giving a visual check for complete coupling. Small diameter mating seal helps keep separation forces to a minimum, allowing for easier connect and disconnect at pressures up to,000 PSI.,000 PSI working pressure, 7,000 PSI intermittent pressure. oupler ody Thread Size Part Size imensions Wt. (L.) (in.) No. NPTF (in.) P/Piece / - / Specifications ody Size (in.) / Rated Pressure (PSI),000 Rated Flow (GPM) Temperature Range (std seals) -0 to +80 F Vacuum test 0 in/hg Torque to connect at 00 PSI 7 in/lbs. Nipple ody Thread Size Part Size imensions Wt. (L.) (in.) No. NPTF (in.) P/Piece / - /

33 Mold oolant Line ouplings Moldmate Series pplications Parker moldmate couplings are specifically designed for connecting coolant lines to molds and dies, on injection molding machinery in the plastics and die casting industries. Moldmate couplings significantly reduce machine downtime by providing fast and easy connection of coolant lines during mold changes. Their short nipples can be recessed below the surface of the mold for more efficient storage of molds. Moldmate couplers are available with or without valves in the female half. Non-valved couplers provide maximum flow for efficient cooling. Valved couplers shut off when disconnected. Special Order Information Standard seal material is Silicone and is compatible with water and water glycol (anti-freeze) fluids commonly used in heat transfer systems. Flourocarbon seals are available for use only with oil-based media and not with water glycol. To specify a Flourocarbon seal, add the suffix Y to the standard moldmate part number, thus: P0Y. Selection Guidelines Moldmate couplings are designed for a maximum working pressure of 00 PSI. Most thermoplastic and thermoset heat transfer systems have pumps which provide relatively high flow rates at relatively low pressures. Water and water glycol (anti-freeze) systems usually have capacities ranging from to 0 gpm, with most from to gpm. Normal medial opening pressures are 0 to 0 PSI for these systems. Heat transfer systems using oil generally operate from to PSI. However, their flow rates are usually much higher, requiring the total volume of oil to be circulated at least once per minute. The number of hose connections in a single mold system results in a cumulative pressure drop. Please note the Pressure rop vs. Flow Rate chart provided, to select the appropriate size. Temperature is another important consideration. Parker moldmate couplings with their standard Silicone seal have a temperature capability of -90 to +00 F. Rapid deterioration of the seal and leakage may result if used beyond these limits. xternal conditions of temperature, corrosive atmospheres, and other abnormalities may affect coupling performance and must be considered when selection is made. onsult factory with questions. Specifications ody Size (in.) / /8 / Rated Pressure (PSI) Rated Flow (GPM) Performance Pressure rop in PSI Material Standard Silicone seal *Optional Flourocarbon seal * For use with oil based media only Moldmate Series (/; /8; /") Water Pressure rop (Straight) /" Non-Valved /" Valved Temperature Range -90 to +00 F -0 to +00 F /8" Valved /" Non-Valved. /8" Non-Valved Flow in USGPM -

34 Mold oolant Line ouplings Moldmate Series Features ouplers Straight egree. vailable with or without valves in the coupler. Non-valved couplers have minimum flow resistance for maximum cooling. Valved couplers shut off automatically upon disconnect. Valved couplers can be used with either valved or non-valved nipples. valved nipple, however, must be used with a valved coupler.. Nipples are designed to be recessed below mold surfaces to provide more efficient storage of molds and prevent damage to the nipple.. Widest choice of end fittings available, including straight, or 90 with standard hose barb or Push-Lok barbs for easy installation.. ouplers and nipples are made of corrosion resistant brass, and valved couplers or valved nipple have a Flourocarbon O-ring on poppet and Silicone interface seal as standard for use with water glycol (anti-freeze) type fluids commonly used in heat transfer systems.. Silver sleeve designates valved coupler. ody Part No. Part No. imensions (in.) Size rass Wt. (L.) rass Wt. (L.) Hose Overall Hex Largest Overall Hex Largest (in.) Non-valved P/Piece Valved P/Piece I.d. Length Size iameter Length Size iameter Non-valved Valved / P0 0. P0V 0. / / P0-P* 0. P0V-P 0. / / P P0V 0. / / P P0V 0. / / P0-P* 0. P0V-P 0. / /8 P 0. PV 0.7 / /8 P-P* 0. PV-P 0.9 / /8 P8 0. P8V 0.8 / /8 P8-P* 0. P8V-P 0.0 / / P0 0. N /... / P0-P* 0.0 N /.8.. / P0 0.8 N /.80.. / P0-P* 0. N /.80.. N = Not vailable ody Part No. Part No. imensions (in.) Size rass Wt. (L.) rass Wt. (L.) Hose Overall Hex Largest Overall Hex Largest (in.) Non-valved P/Piece Valved P/Piece I.. Length Size iameter Length Size iameter Non-valved Valved / P 0. PV 0. / / P-P* 0. PV-P 0. / / P 0. PV 0. / / P 0. PV 0. / / P-P* 0. PV-P 0.7 / /8 P 0. PV 0. / /8 P-P* 0. PV-P 0. / /8 P8 0. P8V 0. / /8 P8-P* 0. P8V-P 0.0 / / P 0.7 N /.8.. / P-P* 0.78 N /.8.. / P 0.7 N /... / P-P* 0.80 N /... * Suffix P in part number denotes Push-Lok hose barb. Without suffix denotes standard hose barb. Push-Lok hose barbs are designed for use with Parker Push-Lok hose and do not require clamps. Valved ouplers can be used with either non-valved or valved nipples. -

35 Mold oolant Line ouplings Moldmate Series 90 egree Presto artridges ody Part No. Part No. imensions (in.) Size rass Wt. (L.) rass Wt. (L.) Hose Overall Hex Largest Overall Hex Largest (in.) Non-valved P/Piece Valved P/Piece I.. Length Size iameter Length Size iameter Non-valved Valved / P 0. PV 0. / / P-P* 0. PV-P 0. / / P 0. PV 0. / / P 0. PV 0. / / P-P* 0. PV-P 0.7 / /8 P 0. PV 0. / /8 P-P* 0.7 PV-P 0.7 / /8 P8 0. P8V 0. / /8 P8-P* 0.7 P8V-P 0.9 / / P 0.79 N /.0.. / P-P* 0.8 N /.0.. / P 0.80 N /.0.. / P-P* 0.8 N /.0.. * Suffix P in part number denotes Push-Lok hose barb. Without suffix denotes standard hose barb. Push-Lok hose barbs are designed for use with Parker Push-Lok hose and do not require clamps. Valved ouplers can be used with either non-valved or valved nipples. ody Part No. Part No. imensions (in.) Size rass Wt. (L.) rass Wt. (L.) Tube Overall Hex Largest Overall Hex Largest (in.) For No-valving P/Piece For Valving P/Piece Size Length Size iameter Length Size iameter Non-valved Valved / P0-P 0. P0V-P 0. / /8 P-P 0. PV-P 0. / olored buttons available. Sub ssemblies ody Part No. Part No. Thread imensions (in.) Size rass Wt. (L.) rass Wt. (L.) Size Overall Hex Largest Overall Hex Largest (in.) For No-valving P/Piece For Valving P/Piece NPTF Length Size iameter Length Size iameter Non-valved Valved / P P / /8 P P-0 0. / /8 P8-0-HF 0.0 / / P /-.0.. odies are designed for use with valves retained by a hose barb. Valves and valve springs must be ordered seperately. ssembly instructions available. Valves ody Part Size (in.) No. Material / 0 rass /8 P0-S rass Valve Springs ody Part Size (in.) No. Material / 780 Stainless /8 P0- Stainless Replacement Seals ody Size (in.) Seal Material / /8 / * Silicone P00-9 P0-9 P00-9 * Flourocarbon P00-9Y P0-9Y * Please note: ulk seals are considered to be non-returnable. -

36 Mold oolant Line ouplings Moldmate Series Nipples Female Pipe Thread G ody Part Wt. (L.) Part Wt. (L.) Thread imensions (in.) Size No. P/Piece No. P/Piece Size Overall **xposed Hex Largest (in.) rass rass Steel Steel NPTF Length Length Size iameter F G / PNF 0.0 PNF 0.0 / / PNF 0.0 PNF 0.0 / / PNF 0.08 PNF 0.08 / /8 PNF 0.0 PNF 0.0 / /8 PNF 0.07 PNF 0.0 / Male Pipe Thread ody Part Wt. (L.) Part Wt. (L.) Thread imensions (in.) Installation Size No. P/Piece No. P/Piece Size Overall **xposed Hex Largest Recess (in.) rass rass Steel Steel NPTF Length Length Size ia. ia. epth F G F Male Nipple Installation G / PN 0.0 PNS 0.0 / / PN 0.0 PNS 0.0 / / PN 0.0 PNS 0.0 / /8 PN 0.0 PNS 0.0 / /8 PN 0.0 PNS 0.0 / /8 PN 0. N / / PN 0.09 N / / PN 0. N / Valved Nipple ody Part Thread imensions (in.) Installation Size No. Size Overall **xposed Hex Largest Recess Wt. (L.) (in.) rass NPTF Length Length Size ia. ia. epth P/Piece F G / PV* / /8 PV* / *Valved Nipple must be used with Valved oupler. **This dimension represents the portion of the nipple that is exposed when inserted into a moldmate coupler. -

37 Mold oolant Line ouplings Moldmate Series Moldmate xtension Nipples G F ody Part Thread imensions (in.) Wt. Size No. Size Overall xposed Hex Largest (L.) (in.) rass NPTF Length Length Size ia. P/Piece F G / PN0- /-7.0. / / PN0-0 / / / PN0- /-7.0. / / PN- / / / PN-0 / / / PN- / / / PN-70 / / / PN-8 / / / PN- / / / PN-0 / / / PN- / / / PN-70 / / / PN-8 / / /8 PN- / / /8 PN-0 / / /8 PN- / / /8 PN-70 / / /8 PN-8 / / /8 PN- / / /8 PN-0 / / /8 PN- / / /8 PN-70 / / /8 PN-8 / / /8 PN- / / /8 PN-0 / / /8 PN- / / /8 PN-70 / / /8 PN-8 / /

38 High Flow ouplings ST Series pplications The Parker ST Series are non-valved couplings for applications where maximum flow is required. Their smooth, open bore offers the lowest pressure drop of any quick coupling design and is ideal for applications such as highpressure water and steam washers, carpet cleaners and mold coolant lines. They are often used in food processing, on fluid and dye transfer lines. Specifications Special Order Information ll sizes of ST Series can be furnished with locking sleeves. Place suffix letters SL (Sleeve-Lok) after regular catalog numbers. xample: SST-MSL. Standard seal material is una-n (Nitrile). thylene Propylene, Flourocarbon, or Neoprene seals are available upon request. See Fluid ompatibility hart for recommendations. ody Size (in.) /8 / /8 / / / / Rated Pressure (PSI) rass plr/npl Steel plr/npl SS plr/npl Rated Flow Temperature Range (std seals) -0 to +0 F Performance ST Series (/8; /; /8; /") Test Fluid: Oil - 00 SUS 9 ST Series (/; ; /") Test Fluid: Oil - 00 SUS /" 8 7 Pressure rop in PSI /8" /" /8" /" Pressure rop in PSI " /" Flow in USGPM Flow in USGPM -7

39 High Flow ouplings ST Series Features. The smooth, open bore with no valving in either half offers minimal pressure drop and allows easy cleaning in applications where the same lines are used for more than one media.. ST couplers and nipples are machined from solid barstock, providing a quality coupling that is durable. ST couplers are available in brass and stainless steel as standard product materials.. ST nipples are available in stainless steel, brass and zinc-plated steel. The ball locking grooves of the steel ST nipples are case hardened for resistance to brinelling where high cycle rates and pressure surges are encountered.. The ST is an "Interchange" coupling since it dimensionally and functionally interchanges with similar couplings made by other manufacturers. ouplers Female Pipe Thread ody Part No. Part No. Thread imensions (in.) Size Wt. (L.) Type Wt. (L.) Size Overall Wrench Largest (in.) rass P/Piece Stainless P/Piece NPTF Length Flats iameter /8 ST- 0.0 SST- 0.0 / / ST- 0.7 SST- 0. / /8 ST- 0. SST- 0. / / ST- 0.9 SST- 0.7 / / ST- 0. SST- 0.7 /-... ST SST / / ST-.8 /- / / ST-. /- / ontact division for SPP port availability Male Pipe Thread ody Part No. Part No. Thread imensions (in.) Size Wt. (L.) Type Wt. (L.) Size Overall Wrench Largest (in.) rass P/Piece Stainless P/Piece NPTF Length Flats iameter /8 ST-M 0.0 SST-M 0.0 / / ST-M 0. SST-M 0. / /8 ST-M 0. SST-M 0. / / ST-M 0. SST-M 0. /-.9.. / ST-M SST-M 0.9 /-.7.. ST-8M 0.8 SST-8M /..7.0 ontact division for SPT port availability -8

40 High Flow ouplings ST Series Nipples Female Pipe Thread G ody Part Part Part No. Thread imensions (in.) Size No. Wt. (L.) No. Wt. (L.) Type Wt. (L.) Size Overall xposed Hex Largest (in.) rass P/Piece Steel P/Piece Stainless P/Piece NPTF Length Length Size ia. F G /8 ST-N 0.0 ST-N 0.0 SST-N 0.0 / / ST-N 0.07 ST-N 0.07 SST-N 0.07 / /8 ST-N 0. ST-N 0. SST-N 0. / / ST-N 0. ST-N 0. SST-N 0. / / ST-N 0. ST-N 0. SST-N 0. / ST-N8 0. ST-N8 0.9 SST-N / / ST-N 0.8 /- / / ST-N. /- / F ontact division for SPP port availability Nipples Male Pipe Thread G F ody Part Part Part No. Thread imensions (in.) Size No. Wt. (L.) No. Wt. (L.) Type Wt. (L.) Size Overall xposed Hex Largest (in.) rass P/Piece Steel P/Piece Stainless P/Piece NPTF Length Length Size ia. F G /8 ST-NM 0.0 ST-NM 0.0 SST-NM 0.0 / / ST-NM 0.0 ST-NM 0.0 SST-NM 0.0 / /8 ST-NM 0.08 ST-NM 0.07 SST-NM 0.08 / / ST-NM 0. ST-NM 0. SST-NM 0. / / ST-NM 0. ST-NM 0. SST-NM 0. / ST-N8M 0. ST-N8M 0. SST-N8M 0. - / / ST-NM 0.9 /- / / ST-NM. /- /..9.. ontact division for SPT port availability Replacement Parts ST Series ody Size (in.) ST Series O-Rings /8 / /8 / Standard una N* -0N N N N07-70 ody Size (in.) ST Series O-Rings / -/ -/ Standard una N* -N N N N07-70 * Other compounds available are ethylene Propylene O89-80, Flourocarbon V088-7, Neoprene To order change compound number. xample: ST-Y (Flourocarbon) = -0V onsult ivision for pricing. -9

41 High Flow ouplings Water Service Series pplications Parker Water Service ouplings are used anywhere water hoses are connected and disconnected frequently. They are used on a wide variety of applications including garden hoses, wash down systems, and mobile water tank lines. The unvalved design permits maximum flow with minimum pressure drop. Specifications ody Size (in.) /" Rated Pressure (PSI) 00 Rated Flow (GPM) 8 Temperature Range (std seals) -0 F to +0 F Features rass and stainless steel construction for heavy duty service. urable -ball locking mechanism for secure connections. Quality, temperature-resistant nitrile seals for a leak-free service life. oupler ody Part Thread Size Overall Length Largest iameter Wt. (L.) Size (in.) No. NH P/Piece / -0 /- /.. 0. Nipple ody Part Thread Size Overall Length xposed Length Wt. (L.) Size (in.) No. NH P/Piece / - /- /

42 High Flow ouplings W Series pplications Parker s W Series couplings are designed for equipment used for cleaning applications such as paint removal or mill scale. The,000 psi operating pressure of the W series makes it ideal for applications that require a high pressure coupling with minimal pressure drop. Materials Of onstruction ody: Finish: Valve: Seal: Steel Zinc plated with yellow chromate finish None Straight through una-n (Nitrile) with backup washer (female half only) Features Push-to-onnect allows for quick, easy connections by eliminating the need to retract the sleeve to couple Locking collets in the female half maintain degree contact with male half to evenly distribute load and reduce brinelling. Zinc plating with yellow chromate finish resists corrosion. Straight through design allows for excellent flow with low pressure drop. Sleeve Lock design prevents accidental disconnects. Two knurled bands on the sleeve provide good gripping for operation of sleeve to disconnect. Stainless steel collets resist corrosion and provide smooth latching action. Polymyte backup washer ensures sealing integrity at high pressure. Heat treated components to reduce wear and brinelling. Sleeve guard prevents accidental disconnect and protects the opening between the sleeve and the body from the environment. Performance 0 W Series (/") Test Fluid: Oil - SUS 00 0 Specifications ody Size (in.) / Max Operating Pressure (PSI),000 Rated Flow (GPM) Temperature Range (std seals) -0 to +0 F Pressure rop in PSI /" oupler 0 Flow in USGPM ody Part Thread Overall Hex Largest Size (in.) Number Size Length Size iameter / W-0-8FP /- NPTF.0.. Nipple G F ody Part Thread Overall xposed Hex Largest Size (in.) Number Size Length Length Size iameter F G / W-0-8FP /- NPTF.... -

43 High Flow ouplings HO Series pplications HO Series couplings are used in a wide variety of applications. HO couplings are used in refineries, petrochemical plants and paper and pulp mills for connecting hose lines for high pressure hydro-blasting of boilers and pipe lines. They are also used in oil fields on hose lines for internal and external pressure testing of tubing. Note: Protective dust plugs and caps play a crucial role in the life of a quick coupling and no purchase of a hydraulic quick coupling is complete without the selection of an appropriate dust plug and cap. See pages noted in Table of ontents for hydraulic couplings dust plugs and caps for the full line of hydraulic couplings. Specifications ody Size (in.) / /8 / Rated Pressure (PSI),000,000,000 Rated Flow (GPM) Temperature Range (std seals) -0 to +0 F Features For high pressure applications: working pressures to,000 PSI (,00 ar) for the / and /8 sizes; to,000 PSI (700 ar) for the / size. No internal valving to restrict flow. Made of steel with electroless nickel plating for corrosion resistance. Standard sleeve-lock feature which helps prevent accidental disconnect. Standard una-n ody O-Ring. acked up by Teflon washer to prevent seal extrusion. ouplers ody Thread imensions (in.) Size Part Size Overall Hex Largest Wt. (L.) (in.) No. NPSF Length Size iameter P/Piece / HO--FP / /8 HO-7-FP / / HO-0-8FP / Nipples ody Thread imensions (in.) Size Part Size Overall xposed Hex Largest Wt. (L.) (in.) No. NPSF Length Length Size iameter P/Piece F G F G / HO--FP / /8 HO-7-FP / / HO-0-8FP / NPSF National Pipe Straight Fuel SPP ritish Standard Pipe Parallel -

44 ust Plugs and ust aps pplications Parker offers a complete line of dust plugs and caps for their hydraulic quick couplings. ach series shown in this catalog has a dust plug and cap specifically designed to be used with that style of coupling. ust plugs and caps serve a twofold function. They keep the mating surface clean and free of contamination and protect the critical mating elements of the coupling halves when they are disconnected. In this way the nipple is protected from damage that would make the total coupling unusable. Protective dust plugs and caps play a crucial role in the use of quick couplings and no purchase of a hydraulic quick coupling is complete without the selection of an appropriate dust plug and cap. When ordering the dust cap/plug body size must correspond to that of the coupler or nipple. Parker s full line of dust plugs and caps can be found below and on the following pages. ust Plug: ust ap: Used on oupler (female half) Used on Nipple (male half) ust Plugs 0 Series ody ust Plug ust Plug ust ap ust ap Size Part No. Part No. Part No. Part No. (in.) luminum Rubber luminum Rubber /8 H- H-M H- H-M / H- H-M H- H-M /8 H- H-M H- H-M / H- H-M H- H-M / H- H-M H- H-M H8- H8-M H8- H8-M / H- N H- N / H0P- N H0P- N N = Not vailable 00 Series ody ust Plug ust ap Size Part No. Part No. (in.) Rubber Rubber / H-M HM /8 TR-7 TR-7 / 0-M 09-M / 9-M 7-M 9-M 7-M SM Series ody Size ust Plug ust ap (in.) Part No. Part No. Material / PL- N/ Plastic / PR- R- Rubber / P- - luminum / P-0-0 Rubber / P-0-0 luminum / P-7-7 luminum -

45 ust Plugs and ust aps 000 Series & 000 Series ody ust Plug ust Plug ust ap ust ap Size Part No. Part No. Part No. Part No. (in.) Steel Rubber Steel Rubber / 0-M* 09-M* / / 00-0-M* M* / * esignates all rubber material. (Not shown at left) NS & N Series FF Series, FH Series & FS Series ody Size (in.) Part Number Rubber /8 NR-7 / NR-0* / NR-7* NR-0 Protective cover fits either half. *In the N Series, the NR-0 is used for the N male half of the coupling, and the FR-7 is used for the female half. ody ust Plug ust ap Size Part Number Part No. (in.) Rubber Rubber /* FR- FR- /8 NR-0 NR-7 / FR-0 FR-0 / FR-7 FR-7 FR-0 FR-0 * FR- fits both halves 0 Series ody ust Plug ust ap Size Part No. Part No. (in.) rass rass / / /

46 ust Plugs and ust aps 900 Series ody ust ap. Size Part No. (in.) Rubber / Series ody ust Plug ust ap Size Part No. Part No. (in.) Steel Steel / / T Series ody Size Part Number (in.) Rubber /8 TR-7 Protective cover fits either half. P Series ody Size ust ap (in.) Part No. /8 P-8 -

47 Ordering Information When ordering Parker coupler bodies and nipples, please state the part number of each type of coupler body and each type of nipple desired. List coupler bodies and nipples as separate items rather than in combinations. e sure to double check thread or hose sizes of items required. Many of Parker s coupling products are available with unique non-standard options well suited to very specific applications. xamples of unusual end use applications might include: high temperatures (above 0 F), extremely caustic/corrosive solutions passing through the coupling, external/environmental corrosion situations, or other high wear and tear situations such as dragging the product along the ground. Please see the Fluid ompatibility hart at the end of the catalog for a guide in selecting material for various media. It is always recommended that the Quick oupling ivision be contacted with any questions concerning specific product application needs. Typically, a prefix or suffix is added to the base part number to specify a non-standard O-ring seal, or special option such as a sleeve lock. The Optional Seals Suffix chart illustrates the designations. Please Note: ertain couplings series have additional "Special Order Information" which should be referred to in ordering those products. If applicable to the product, "Special Order Information" is found next to the Features and Specifications charts. oupling Material Prefix for rass Operation Prefix H for heavy duty nipple Suffix SL for coupler sleeve-lok Suffix P for poppet valve Suffix P for Push-lok hose barb Suffix V for Valve ctuator Optional Seals Suffix* No suffix is required when ordering products with the standard una-n (Nitrile) seals. When specifying an optional seal, refer to the following chart to determine the appropriate suffix.** oupling Series thylene Flouro- Neoprene Perfluoro- Propylene carbon elastomer 0 Series W Y Z - 00 Series W Y Z - SM Series 7 HP Series Series W Y Z N/ 00 Series W Y Z N/ NS Series 7 N Series 7 FF Series 7 Std. is 9 (FT) F Series 7 FH Series 7 FS Series ST 7 0 Series W Y Z N/ 000 Series W Y Z N/ 800 Series W Y Z N/ 900 Series W Y Z N/ 00 Series T Series Series vailable with Polyurethane only (no suffix needed) vailable with Fluorocarbon only (no suffix needed) vailable with Polyurethane only (no suffix needed) ST Series W Y Z Water Service vailable with una-n only W Series N/ HO Series N/ Moldmate Series N/ Y*** N/ N/ Std. is Silicone *To select proper seal materials, see Fluid ompatibility hart in ppendices section, or contact your Parker Quick oupling istributor. **N/ = Not vailable; ST = Standard (No Suffix Needed) *** Flourocarbon seal available for use only with oil based media, not water glycol. -

48 Promotional Products escription These popular coupling key chains are now available from the. The new key chains are an anodized aluminum construction available in an array of colors. Key chains can be ordered using part numbers in the following chart. Part Number KY-K KY-U KY-GR KY-R KY-L KY-NI Sleeve olor lack lue Green Red lear Old style nickel plated -7