28-1 & 29 Series. Compact, Light Weight Non-Spill Couplings. Compact Couplings for Applications Requiring Minimal Air Inclusion or Spillage

Transcription

1 8- & 9 Series Compact, Light Weight Non-Spill Couplings Compact Couplings for Applications Requiring Minimal Air Inclusion or Spillage Both 8- and 9 Series are non-spill, push-to-connect couplings designed to fit in confined spaces. Their small envelope size and aluminum material option results in a compact, lightweight connection. The non-spill valving has minimal spillage and air inclusion while providing maximum flow with low pressure drop. The 8- Series is rated for pressures up to 0 psi (9 bar) and is available in /"-" body sizes. The 9 Series is rated for pressures up 00 psi (9 bar) and is available in /8"--/" body sizes. Both products have stainless steel and aluminum material options. 9 Series for pressures to 00 psi (9 bar) 8- Series for pressures to 0 psi (9 bar) Contact Information: Quick Coupling Division phone 8 fax 8 qcd_sales@parker.com 8- Series eatures: 9 Series eatures:

2 8- Series Performance Data Typical Applications Include: Pressure Ratings Aluminum Stainless Steel Size Working Pressure Working Pressure PSI Bar PSI Bar PRESSURE LOSS (PSI) Pressure Loss vs. low LOW RATE (LPM).0.. /" /8" /" 98 /8"..0 /" " NOTE: Air Inclusion on Connect, Spillage on Disconnect Air Inclusion* Spillage Size in cc in cc NOTE: -/".00 -/" 0 " Series Dimensions and Weights E Hex Across lats Hex Across lats Coupler D Dia Nipple A B Size Coupler Connected Nipple A D E Weight Length B Weight in mm in mm in mm lb g in mm in mm in mm lb g

3 9 Series Performance Data Pressure Loss vs. low LOW RATE (LPM) Typical Applications Include: PRESSURE LOSS (PSI) /8"..0. /" /8" 98 /"..0 /8" /" NOTE: " -/" Pressure Ratings Aluminum Stainless Steel Size Working Pressure Working Pressure PSI Bar PSI Bar Air Inclusion on Connect, Spillage on Disconnect Size Air Inclusion* Spillage in cc in cc * NOTE: 9 Series Dimensions and Weights s E Hex Across lats Hex Across lats Coupler D Dia. Nipple A B Size Coupler Connected Nipple A D E Weight Length B Weight in mm in mm in mm lb g in mm in mm in mm lb g

4 8- and 9 Series End itting Configurations G H J K M T Size MS Bulkhead lared EB SAE Bulkhead MS Bulkhead lareless MS Male lared EM Male SAE MS Male lareless emale NPT RP emale British Parallel BS 9 9 emale O-ring Boss MS9 M Male NPT G- G-EB Wt. H Wt. J Wt. K Wt. M (Max) Wt. T Wt. in mm in mm lb g in mm lb g in mm lb g in mm lb g in mm lb g in mm lb g /8" /" /8" /" /8" /" " /" /" " Ordering Information A 8- C 8-8 Series: 8-9 Material: A = Aluminum S = Stainless Steel Coupler or Nipple Size: = /8"* = /" = /" = " = /8" = -/" 8 = /" = " = /8" Body: C = Coupler N = Nipple End itting Size: = /8" = /" = /" = " = /8" = -/" 8 = /" = " = /8" Seals**: A = Nitrile (AMS ) V = luorocarbon J = Nitrile (MIL-P-) M = Nitrile (MIL-P-} E = Ethylene Propylene End itting Type: = MS Bulkhead = MS Bulkhead = MS Male lare = MS Male 9 = MS9 emale * Available 9 only Available 8- only ** Standard seal in 8- Series Nitrile (AMS ) - no letter designation required Standard seal in 9 Series Nitrile (MIL-P-) - no letter designation required or other seal compounds, consult QCD Note: Not all configurations are standard product offering. Contact QCD for price and delivery. = emale NPT RP = emale British Parallel BS 9 M = Male NPT EM = SAE Male lare EB = SAE Bulkhead 8- Series Dust Caps Size Coupler Nipple 9 Series Dust Caps Size Coupler Nipple Pressure Cap for Nipple

5 Snap-tite Series High Pressure, Push-to-Connect Non Spill-Quick Couplings Heavy Duty with Superior low and Versatility Parker s Snap-tite Series couplings are designed for working pressures up to,000 psi. Available in a variety of materials and with a wide range of body sizes. Air inclusion and fluid loss are minimal with the flush face valves. Large flow chambers in the body and an exclusive valve design permit superior flow while maintaining low pressure drop. Contact Information: Quick Coupling Division phone 8 fax 8 qcd_sales@parker.com Series eatures:

6 Technical and Dimensional Information Size: /" thru -/" low Charts LOW RATE (lpm) Size A B (Hex)* C (Hex)* D (Dia.) E G LOW RATE (lpm) PRESSURE LOSS (psi) /" /8" /" /" LOW RATE (gpm) HYDRAULIC LUID " & -/" Maximum Recommended low Rate PRESSURE LOSS (bar) Size: -/" and " Size A B (Hex)* C (Hex)* D (Dia.) E G PRESSURE LOSS (psi) /" & " 0 00 LOW RATE (gpm) HYDRAULIC LUID Maximum Recommended low Rate PRESSURE LOSS (bar)

7 Pressure Ratings Size Air Spillage Inclusion (cc) (cc) Steel Stainless Steel High Pressure Stainless Steel Max. Working Min. Burst* Max. Working Min. Burst* Max. Working Min. Burst* PSI Bar PSI Bar PSI Bar PSI Bar PSI Bar PSI Bar /".0.0,000 89,000 9,000,00 8,000 89,000 9 /8" x /".0.0,000 89,000 9,000,00 8,000 89,000 9 /8".0.0,000 89,000 9,000,00 8,000 89,000 9 /8" x /".0.0,000 89,000 9,000,00 8,000 89,000 9 /".0.0,000 89,000 9,000,00 8,000 89,000 9 /".0.0,00,000,000,00 8,00,000 "..0,00,000,000,000 89,00,000 " x -/"..0,00,000,000,000 89,00,000 " x -/". 0.0,000,000 89,000,000,000, ". 0.0,000,000 89,000,000,000, Ordering Information - C - Coupling Body Size: = /" = /" = /8" = " 8 = /" = " Coupling Half: C = Coupler N = Nipple Series: = -/" & " Nipples Only - = -/" & " Couplers Only - = /" thru -/" Both Material: Blank = Steel, zinc trivalent plating S = Stainless Steel SH = High Pressure Stainless Steel End itting Size: = /" = " = /8" = -/" 8 = /" = -/" = /" = " * or sizes up to " NPT threads in steel. or sizes up to " NPS threads in stainless steel. or sizes over " NPT threads. Options: SL = Sleeve Lock Seals: Standard Seal = Nitrile V = luorocarbon E = Ethylene Propylene M = MHO End itting Type: * = emale NPT E = emale SAE RP = emale British Parallel BS9 Autoclave cone & threaded fittings available (consult QCD) Plastic Dust Caps Notes: Maximum Recommended Connect/Disconnect Pressures Pressure Size PSI Bar Coupler Dust Cap Nipple Dust Cap Size - Style - Style Note: Not all configurations are standard product offering. Contact QCD for price and delivery.

8

9 Snap-tite Series Thread-to-Connect Coupling Heavy Duty Threaded Connection in a Wide Range of Sizes The rugged Series is designed and constructed for high pressure hydraulic service. Although these couplings are used in a broad variety of heavy duty applications, a primary usage is in oil fields and offshore drilling. Other applications include cranes, power tongs, horizontal boring and dewatering. Available in sizes /" through ", in steel or stainless steel construction. The /" size has a hex nut sleeve. All other sizes have a wing nut style connection. Contact Information: Quick Coupling Division phone 8 fax 8 qcd_sales@parker.com Series eatures:

10 Technical and Dimensional Information /" thru " ** ** A B C (Dia.) D E (Dia.) G H (ACME) Size in mm in mm in mm in mm in mm in mm in mm Torque Values for Connecting Under Pressure INTERNAL PRESSURE (bar) low Chart LOW RATE (lpm) /" " -/" -/".00 " /" " " TORQUE (inch pounds) " -/" -/" " /" TORQUE (N.m.) PRESSURE LOSS (psi) PRESSURE LOSS (bar) MAXIMUM RECOMMENDED CONNECTING PRESSURE INTERNAL PRESSURE (psig) LOW RATE (gpm) 88 SSU (8 cst) oil

11 Pressure Ratings Size Spillage Air Inclusion (cc) (cc) Maximum Working Pressure Maximum Burst Pressure Maximum Working Pressure Steel Only Steel Only Stainless (Connected Only) PSI Bar PSI Bar PSI Bar Ordering Information C - Series: Coupling Half: C = Coupler N = Nipple Material: Blank = Steel plated S = Stainless Steel End itting Size: = /" = " = " 0 = -/" = -/" 8 = " = -/" = " Coupling Body Size: = /" = " = " 0 = -/" = -/" 8 = " = -/" = " Options: DBP*** = "ire Safe" BOP version /" thru " steel sizes only Options: W** = Wrench lats on body Seals: Blank = Nitrile V = lourocarbon E = Ethylene Propylene Rubber End itting Type: * = emale Pipe NPT for Steel - NPT for SST E = emale SAE RP = emale British Parallel BS9 Dust Plugs and Caps Size Dust Plug Dust Cap Repair Kits Size Coupler Kit Nipple Kit * or sizes up to ", NPT threads. or sizes over ", NPT threads. **Not available on " E coupler. Standard on -/" and larger sizes (code not needed). ***DBP available in /" through " sizes. Steel material only. Seal material code not applicable with DBP option-leave blank. Note: Not all configurations are standard product offering. Contact QCD for price and delivery.

12

13 Snap-tite H, IH & PH Series General Purpose Hydraulic and Pneumatic Quick Couplings Many Standard Configurations Suitable for Hydraulic and Pneumatic Applications: Snap-tite H Series couplings have been proven by years of use on hydraulic and pneumatic applications. H Series is best suited for general purpose fluid applications where either single or double shut-off valving is desired. A wide range of sizes, materials and end configurations are available. PH version couplers and nipples are valved with a connect-under-pressure feature. These steel couplers and nipples allow connection with H Series valved couplers and nipples when there is residual pressure on the PH coupler/nipple side. IH version couplers are steel with a cylindrical valve designed specifically for pneumatic use. When paired with an unvalved/plain H Series nipple, it functions as a durable single-shut-off connection. Contact Information: Quick Coupling Division phone 8 fax 8 qcd_sales@parker.com H Series eatures:

14 Technical and Dimensional Information H Series couplings Two -Piece Body Construction Postive Ball-Lock Design Ball Bearing Sleeve Lock O-Ring and Back-Up PH version couplers Jet Stream Valve Design Hardened Sleeve Localized Induction Hardened Land H Series Poppet Has Metal-to-Metal Stop Non-Shift Valve Wide Choice of End-ittings IH version couplers IH Version PH Version Working Pressures Size Valved on both coupler and nipple (Double Shut-off) Valved on one half and Unvalved/Plain on other half (Single Shut-off) Unvalved/Plain on both coupler and nipple (Straight Through) Steel Aluminum Brass Stainless Steel Aluminum Brass Stainless Steel Steel psi bar psi bar psi bar psi bar psi bar psi bar psi bar psi bar NOTE:

15 low Charts H Series IH Series Valved and Valved (Double Shut-off) LOW RATE (LPM) CM REE AIR AT. PSIA, PRESSURE LOSS (PSI) /" /8" /" /" " -/" -/" " PRESSURE LOSS (BAR) PRESSURE LOSS (PSI) /" /8" /" /" PRESSURE LOSS (BAR) LOW RATE (GPM) (MiL-H-08 ± ) MAXIMUM LOW AT 8 PSI AIR LOW RATE, LB. PER MIN. PH Series Valved and Plain (Single Shut-off) Valved and Valved (Double Shut-off) LOW RATE (LPM) LOW RATE (LPM) PRESSURE LOSS (PSI) /" /8" /" /" " -/" -/" " PRESSURE LOSS (BAR) PRESSURE LOSS (PSI) /8" /" /" " PRESSURE LOSS (BAR) LOW RATE (GPM) (MIL-H-08 ± ) LOW RATE (GPM) (MiL-H-08 ± )

16 Valved Coupler and Nipple Dimensions (without end fitting) SEE END ITTING A C SEE END ITTING B D (Hex) ENGAGEMENT LENGTH H D (Hex) Size /" /8" /" /" " -/" -/" " -/" " " A B C D * H Valved Coupler and Nipple End itting Dimensions Size /" /8" /" /" " -/" -/ " -/" " " Male Tapered Pipe G * G EM Male SAE lared and MS G * G MS G * G emale Tapered Pipe G * G E emale Straight and MS9 G * G EB Male SAE Bulk- Head G * G emale RP British Parallel G * G

17 Unvalved/Plain Coupler and Nipple End Configurations emale Pipe Thread emale RP British Parallel Thread Male Pipe Thread A C A L K B B D (Hex) H E (Hex) E (Hex) H E (Hex) H J Size /" /8" /" /" " -/" -/" " -/" " " A B C D * E *, H K J * L NOTES: Accessories Plastic Dust Cap PDC Metal Dust Plug AMPH Plastic Dust Plug PDP Metal Dust Cap ADCH Plastic Cap and Plug Aluminum Dust Caps and Plugs Pressure Caps Metal Pressure Cap MCH Sizes Plastic Cap Plastic Plug Aluminum Plug Aluminum Cap Pressure Cap

18 Ordering Information S V H C - Sleeve Lock Option: SL = Helps to prevent accidental disconnection Seals: Blank = Nitrile (Code A) J = Military variation of Nitrile for hydrocarbon fuels M = Military variation of Nitrile for MIL-H-0 fluids V = luorocarbon E = Ethylene Propylene End itting Type: M = Male NPT = emale NPT E = emale SAE EM = Male SAE lare EB = Bulkhead SAE RP = emale British Parallel BS9 9 = MS9 emale = MS Male lare = MS Bulkhead = MS Male = MS Bulkhead Coupling Half: C = Coupler N = Nipple Series: H = Poppet valve or plain/unvalved PH = Poppet valve with pressure relief feature IH = Pneumatic cylindrical valve Type: V = Valved P = Plain (without valve) End itting Size: = /8" = -/" = /" = -/" = /8" = " 8 = /" 0 = -/" = /" 8 = " = " = " Coupling Body Size: = /" = -/" = /8" = " 8 = /" 0 = -/" = /" 8 = " = " = " = -/" Material: Blank = Steel, clear trivalent plating A = Aluminum, clear anodized B = Brass S = Stainless Steel PH Valve option recommended on one side, not both. Available in steel only. IH available in steel only. or sizes up to " NPT threads in steel. or sizes up to " NPS threads in stainless steel. or sizes over ' NPT threads. Note: Not all configurations are standard product offering. Contact QCD for price and delivery. H PH IH Double Shut-Off Valved Coupler Valved Nipple Single Shut-Off Valved Coupler Unvalved/Plain Nipple Straight Through Unvalved/Plain Coupler Unvalved/Plain Nipple

19 Replacement Parts Valve Kits Example: Valve Seals Example: Coupler Interface Seals Example: * Standard Configurations for General Purpose Hydraulic and Pneumatic Applications H Series PH Series IH Series Hydraulic Coupler/Nipple Hydraulic Coupler/Nipple Pneumatic Coupler Valve Styles: Connection Types: Body Sizes: Materials:

20