Thermoplastic Couplings

Transcription

1 Thermoplastic ouplings Thermoplastics -1 Quick oupling Division

2 Thermoplastic ouplings Table of ontents Thermoplastics oupling Selection Guide...-3 Spectrum Series...-4 Specifications...-4 ouplers...-5 Nipples - Unvalved...-6 Nipples - Valved...-7 PF Series...-8 Specifications...-8 ouplers...-9 Nipples...-9 Dust aps and Plugs...-9 Ordering Information Quick oupling Division

3 Thermoplastic ouplings oupling Selection Guide PF Series hemical Transfer Spectrum TM Series Spectrum TM Series Spectrum TM Series Valving Flush Face Non-Spill Valved or Unvalved Valved or Unvalved Valved or Unvalved ody Size (in.) Material 1/2" & 1" Polypropylene/ Stainless and/or Kynar/Hastelloy 1/8" & 3/8" cetal 316 SS Locking Mechanism Pawl lock oupler Style Push-to- onnect Push-to- onnect Push-to- onnect Push-to- onnect Std. Seal Material Fluorocarbon 1/8" & 3/8" PVDF/SS 316 SS Finger Lock Fluorocarbon 3/8" PVDF/ Finger Lock Fluorocarbon PEEK TM Temp Rate Range** Pressure +40 to +140 F 30 to 100 PSI Finger Lock Nitrile 0 F to 180 F 0 to 145 PSI 0 F to 250 F 0 to 115 PSI 0 F to 250 F 15 to 115 PSI Thermoplastics -3 Quick oupling Division

4 Thermoplastic ouplings Push-To-onnect Spectrum Series Description Parker s Spectrum Series couplers are the most advanced engineered thermoplastic couplings available. Spectrum Series couplings combine compact size, high flow capability, and light weight design to meet a broad range of coupling applications. Three material combinations allow the couplings to be used in markets as diverse as chemical processing, automation equipment, semi-conductor and food processing. Spectrum Series can be used in many applications previously reserved for stainless steel couplings. dditional features include: convenient push-to-connect design, a wide range of port options, and modular design. Thermoplastics Features Excellent hemical ompatibility Three Material ombinations: cetal/ss, PVDF/SS and PVDF/PEEK High Flow apacity Easy Push-To-onnect Operation vailable Valved and Unvalved Flexible Modular Design Four Point 360 Locking Mechanism Temperatures Up To 250 F Panel Mounting Option Performance How To Order Pressure Drop (PSID) /8" Spectrum Series Water Pressure Drop 0.5 Double Shut Off Single Shut Off Straight Through Flow Rate (GPM) Pressure Drop (PSID) /8" Spectrum Series Water Pressure Drop Double Shut Off Single Shut Off Straight Through Flow Rate (GPM) S 2 - V FP FP - Female pipe MP - Male pipe H - Standard hose barb H - ulkhead hose barb Port Size 16 ths ody Size 2-1/8 Inch 6-3/8 Inch V - Valved S - Straight thru - oupler N - Nipple P - Panel mount coupler - cetal P - PVDF K - PVDF/PEEK Spectrum Series Thermoplastic ouplings Specifications cetal/ss PVDF/SS PVDF/PEEK (black with grey sleeve) (translucent with green sleeve) (translucent) ody Size 1/8 3/8 1/8 3/8 3/8 Pressure Range psi psi psi psi psi (0-10 bar) (0-10 bar) (0-8 bar) (0-8 bar) (1-8 bar) Temperature Range 0 F to 180 F 0 F to 180 F 0 F to 250 F 0 F to 250 F 0 F to 250 F (-20 to +80 ) (-20 to +80 ) (-20 to +120 ) (-20 to +120 ) (-20 to +120 ) Rated Flow (DSO) 1.5 GPM 4.5 GPM 1.5 GPM 4.5 GPM 4.5 GPM (5.6 lpm) (17 lpm) (5.6 lpm) (17 lpm) (17 lpm) ody Material cetal cetal PVDF PVDF PVDF Spring Material 316 SS 316 SS 316 SS 316 SS PEEK Seal Material Nitrile Nitrile Fluorocarbon Fluorocarbon Fluorocarbon -4 Quick oupling Division

5 Thermoplastic ouplings Push-To-onnect Spectrum Series ouplers Female Pipe ody cetal PVDF PVDF/PEEK Port Overall Hex Largest 1/8 S2-*-02-FP S2-P*-02-FP 1/ /8 S2-*-04-FP S2-P*-04-FP 1/ /8 S6-*-04-FP S6-P*-04-FP S6-K*-04-FP 1/ /8 S6-*-06-FP S6-P*-06-FP S6-K*-06-FP 3/ /8 S6-*-08-FP S6-P*-08-FP S6-K*-08-FP 1/ Male Pipe ody cetal PVDF PVDF/PEEK Port Overall Hex Largest 1/8 S2-*-02-MP S2-P*-02-MP 1/ /8 S2-*-04-MP S2-P*-04-MP 1/ /8 S6-*-04-MP S6-P*-04-MP S6-K*-04-MP 1/ /8 S6-*-06-MP S6-P*-06-MP S6-K*-06-MP 3/ /8 S6-*-08-MP S6-P*-08-MP S6-K*-08-MP 1/ Thermoplastics Hose arb ody cetal PVDF PVDF/PEEK Hose Overall Hex Largest Size (in.) Part No. Part No. Part No. I.D. Length Size Diameter 1/8 S2-*-03-H S2-P*-03-H 3/ /8 S2-*-04-H S2-P*-04-H 1/ /8 S6-*-04-H S6-P*-04-H S6-K*-04-H 1/ /8 S6-*-06-H S6-P*-06-H S6-K*-06-H 3/ (9 mm) 3/8 S6-*-08-H S6-P*-08-H S6-K*-08-H 1/ (13 mm) ulkhead Hose arb ody cetal PVDF PVDF/PEEK Hose Overall Hex Largest ulkhead Size (in.) Part No. Part No. Part No. I.D. Length Size Diameter Hex D D 1/8 S2-*-03-H S2-P*-03-H 3/ /8 S2-*-04-H S2-P*-04-H 1/ Panel Mount ouplers Female Pipe ody cetal PVDF PVDF/PEEK Hose Overall Hex Largest ulkhead Size (in.) Part No. Part No. Part No. I.D. Length Size Diameter Hex D D 1/8 S2-P*-02-FP S2-PP*-02-FP 1/ /8 S2-P*-04-FP S2-PP*-04-FP 1/ Hose arb ody cetal PVDF PVDF/PEEK Hose Overall Hex Largest ulkhead Size (in.) Part No. Part No. Part No. I.D. Length Size Diameter Hex D D 1/8 S2-P*-03-H S2-PP*-03-H 3/ /8 S2-P*-04-H S2-PP*-04-H 1/ * NOTE: Replace * with V for Valved version and S for Non-Valved version -5 Quick oupling Division

6 Thermoplastic ouplings Push-To-onnect Spectrum Series Nipples Unvalved Female Pipe ody cetal PVDF PVDF/PEEK Port Overall Hex Largest 1/8 S2-NS-02-FP S2-PNS-02-FP 1/ /8 S2-NS-04-FP S2-PNS-04-FP 1/ /8 S6-NS-04-FP S6-PNS-04-FP 1/ /8 S6-NS-06-FP S6-PNS-06-FP 3/ /8 S6-NS-08-FP S6-PNS-08-FP 1/ Thermoplastics Male Pipe ody cetal PVDF PVDF/PEEK Port Overall Hex Largest 1/8 S2-NS-02-MP S2-PNS-02-MP 1/ /8 S2-NS-04-MP S2-PNS-04-MP 1/ /8 S6-NS-04-MP S6-PNS-04-MP 1/ /8 S6-NS-06-MP S6-PNS-06-MP 3/ /8 S6-NS-08-MP S6-PNS-08-MP 1/ Hose arb ody cetal PVDF PVDF/PEEK Hose Overall Largest Size (in.) Part No. Part No. Part No. I.D. Length Diameter 1/8 S2-NS-03-H S2-PNS-03-H 3/ /8 S2-NS-04-H S2-PNS-04-H 1/ /8 S6-NS-04-H S6-PNS-04-H 1/ /8 S6-NS-06-H S6-PNS-06-H 3/ (9 mm) 3/8 S6-NS-08-H S6-PNS-08-H 1/ (13 mm) ulkhead Hose arb ody cetal PVDF PVDF/PEEK Hose Overall Hex Largest ulkhead Size (in.) Part No. Part No. Part No. I.D. Length Size Diameter Hex D D 1/8 S2-NS-03-H S2-PNS-03-H 3/ /8 S2-NS-04-H S2-PNS-04-H 1/ Quick oupling Division

7 Thermoplastic ouplings Push-To-onnect Spectrum Series Nipples Valved Female Pipe ody cetal PVDF PVDF/PEEK Port Overall Hex Largest 1/8 S2-NV-02-FP S2-PNV-02-FP 1/ /8 S2-NV-04-FP S2-PNV-04-FP 1/ /8 S6-NV-04-FP S6-PNV-04-FP S6-KNV-04-FP 1/ /8 S6-NV-06-FP S6-PNV-06-FP S6-KNV-06-FP 3/ /8 S6-NV-08-FP S6-PNV-08-FP S6-KNV-08-FP 1/ Male Pipe ody cetal PVDF PVDF/PEEK Port Overall Hex Largest 1/8 S2-NV-02-MP S2-PNV-02-MP 1/ /8 S2-NV-04-MP S2-PNV-04-MP 1/ /8 S6-NV-04-MP S6-PNV-04-MP S6-KNV-04-MP 1/ /8 S6-NV-06-MP S6-PNV-06-MP S6-KNV-06-MP 3/ /8 S6-NV-08-MP S6-PNV-08-MP S6-KNV-08-MP 1/ Thermoplastics Hose arb ody cetal PVDF PVDF/PEEK Hose Overall Hex Largest Size (in.) Part No. Part No. Part No. I.D. Length Size Diameter 1/8 S2-NV-03-H S2-PNV-03-H 3/ /8 S2-NV-04-H S2-PNV-04-H 1/ /8 S6-NV-04-H S6-PNV-04-H S6-KNV-04-H 1/ /8 S6-NV-06-H S6-PNV-06-H S6-KNV-06-H 3/ (9 mm) 3/8 S6-NV-08-H S6-PNV-08-H S6-KNV-08-H 1/ (13 mm) ulkhead Hose arb D ody cetal PVDF PVDF/PEEK Hose Overall Hex Largest ulkhead Size (in.) Part No. Part No. Part No. I.D. Length Size Diameter Hex D 1/8 S2-NV-03-H S2-PNV*-03-H 3/ /8 S2-NV-04-H S2-PNV*-04-H 1/ Quick oupling Division

8 Thermoplastic ouplings Non-Spill ouplings PF Series hemical Transfer ouplings Thermoplastics Features The Parker PF Non-Spill plastic coupling is designed to meet the demand for closed system transfer and dispensing of chemicals with minimal environmental contamination. Rugged Polypropylene construction for chemical compatibility and reduced cost. Simple to operate: Push to connect design Flush face valves exhibit minimal spillage upon connect or disconnect and air inclusion on connect. Teflon coated Flourocarbon tank gasket for improved sealability 1" coupler is non-wetted (different spring options are available for the nipple) Specifications 1/2" PF oupling 1" PF oupling Materials: ody Polypropylene Polypropylene Springs 316 Stainless Steel 316 Stainless Steel Seals Fluorocarbon Flourocarbon Rated Pressure 100 PSI at 68 F 60 PSI at 68 F Rated Flow 12 GPM 20 GPM Pressure Drop at Rated Flow 11.3 PSI 3.4 PSI Maximum Force to onnect 32 lbs. 70 lbs. Maximum Force to Disconnect 12 lbs. 30 lbs. Operating Temperature +40 to +140 F +40 to +140 F Storage Temperature -20 to +140 F Maximum Spillage 0.14 ml 1ml per Disconnect.01 cu. in..06 cu. in. (1cc) Vacuum Rating 27.4 Hg 27.4 Hg pplications The Parker PF Series Non-Spill couplings virtually eliminate fluid loss upon disconnection and are designed to help meet the demand for closed system transfer and dispensing of chemicals with minimal environmental contamination. The push-to-connect design allows ease of connection/disconnection, and the flush valving enables ease of cleaning. They can be used with concentrated or diluted agricultural chemicals when transferring from bulk storage tanks, returnable containers, applicators, etc. The PF Series product line includes hose-end couplers (female port), hose-end nipples (female port), and drum adapters with 2" end connections (NPS or uttress-type thread). Dust covers are available in the product offering as well. Note: Protective dust plugs and caps play a crucial role in the life of a quick coupling and no purchase of a hydraulic quick coupling is complete without the selection of an appropriate dust plug and cap. See pages noted in Table of ontents for dust plugs and caps for the Parker full line of hydraulic couplings. Interchange The 1/2" PF Series products are dimensionally interchangeable with the 1/2" FS Series products. Performance Pressure Drop in PSID PF Series Performance Flow Data Test Fluid: Water, ody Size: 1/2", 1" Flow IN USGPM 1/2" 1" Quick oupling Division

9 Thermoplastic ouplings Non-Spill ouplings PF Series hemical Transfer ouplings ouplers 1" NPT ody Part Part Overall Largest Wrench Wt. (L.) Size (in.) No. Thread Length Diameter Flats P/Piece Nipples 1/2 PF-501-8FP* 1/2" NPT PF FP 1" NPT Thermoplastics 1" NPT ody Tank Overall Largest Wrench Wt. (L.) Size Part Port Mount Length Diameter Flats P/Piece (in.) No. Thread Thread 1/2 PF-502-8FP* 1/2" NPT None PF FP* 1" NPT None /2-5 Modified 5 /45 uttress Thread /2 NPS Modified Thread Fluorocarbon Gasket 1" NPT Fluorocarbon Gasket 1" NPT ody Tank Overall Largest Wrench Wt. (L.) Size Part Port Mount Length Diameter Flats P/Piece (in.) No. Thread Thread Dust aps and Plugs FR PF M* 1" NPT Modified uttress 1 PF MP* 1" NPT Modified NPS * -640 designates hastelloy springs or -714 designates kynar coated springs. FR-502 ody oupler Dust Nipple Dust Size Material ap Part No. ap Part No. 1/2" Synthetic Rubber FR-501 FR-502 1" Ethylene Propylene None PFR " Ethylene Propylene None PFR-1002-NS PFR-1002 PFR-1002-NS -9 Quick oupling Division

10 Thermoplastic ouplings Ordering Information Thermoplastics When ordering Parker coupler bodies and nipples, please state the part number of each type of coupler body and each type of nipple desired. List coupler bodies and nipples as separate items rather than in combinations. e sure to double check thread or hose sizes of items required. Many of Parker s coupling products are available with unique non-standard options well suited to very specific applications. Examples of unusual end use applications might include: high temperatures (above 250 F), extremely caustic/corrosive solutions passing through the coupling, external/environmental corrosion situations, or other high wear and tear situations such as dragging the product along the ground. Please see the Fluid ompatibility hart at the end of the catalog for a guide in selecting material for various media. It is always recommended that the Quick oupling Division be contacted with any questions concerning specific product application needs. Please Note: ertain couplings series have additional "Special Order Information" which should be referred to in ordering those products. If applicable to the product, "Special Order Information" is found next to the Features and Specifications charts. Optional Seals Suffix* No suffix is required when ordering products with the standard Fluorocarbon seals. When specifying an optional seal, refer to the following chart to determine the appropriate suffix.** oupling Series Ethylene Neoprene Perfluoro- Propylene elastomer PF Series E5 E12 E47 *To select proper seal materials, see Fluid ompatibility hart in ppendices section, or contact your Parker Quick oupling Distributor. **N/ = Not vailable; STD = Standard (No Suffix Needed) Spectrum Series are available with these materials ody Material cetal/ss PVDF/SS PVDF/PEEK Seal Material Nitrile Fluorocarbon Fluorocarbon -10 Quick oupling Division