CVH103P. Check Valve Series CVH103P. Technical Information. General Description
|
|
|
- Roy Reed
- 5 years ago
- Views:
Transcription
1 Catalog HY-351/US Information Cartridge Style Valve. For additional information see Tips on pages 1-4. Valve Series H13P Spherical poppet for low leakage D -Ring eliminates back-up rings Dual sense paths for reduced P ll external parts zinc plated let Drop vs. (Through cartridge only) In Free Inlet Drop ( P) GPM (Q) Rated 6 (16 GPM) 35 Bar (5 PSI) Leakage at 2 drops/min. (.13 cc/min.) SSU (32 cst) at 35 Bar (5 PSI) ll parts steel. ll operating parts -45 C to C ( D Ring) (-5 F to +2 F) (-25 F to +25 F) of 45 to 2 SSU (6 to 42 cst) 2 PSI SPRING 5 PSI SPRING.9 kg (.2 lbs.) Cavity C1-2 (See Section for more details) Form Tool Rougher None Finisher NFT1-2F Free Inlet Ø.8 Free let 31.7 (1.25) 7/8-14 UNF-2 H13P 1 Valve Code Omit.3 Bar (5 PSI) 2 Bar (2 PSI) Bar (5 PSI) Bar (65 PSI) 8 Bar (8 PSI) Bar (1 PSI) Omit D -Ring / (SK1-2) N Nitrile / (SK1-2N) (SK1-2V) 11.2 (.44) 1" Hex Nm (51-55 lb. ft.) Part No. 4P 1/4 NPTF (B1-2-*4P) 6P 3/8 NPTF (B1-2-*6P) 8P 1/2 NPTF (B1-2-*8P) 6T SE-6 (B1-2-*6T) T6T SE-6 (B1-2-T6T) 8T SE-8 (B1-2-*8T) T8T SE-8 (B1-2-T8T) 6B 3/8 BSPG (B1-2-6B) * dd for aluminum,omit for steel. Steel body only. 1
2 Catalog HY-351/US Information Cartridge Style Valve. For additional information see Tips on pages 1-4. Valve Series H121P Fully guided poppet for smooth operation ll external parts zinc plated Drop vs. (Through cartridge only) In In Drop ( P) GPM (Q) Free Ø 22.2 (.87) (1.58) 9. (.35) Rated 121 (32 GPM) 35 Bar (5 PSI) SSU (32 cst) at 35 Bar (5 PSI) ll parts steel. ll operating parts -4 C to C (Nitrile) (-4 F to +2 F) (-25 F to +25 F) of 45 to 2 SSU (6 to 42 cst).14 kg (.3 lbs.) Cavity C12-2 (See Section for more details) Form Tool Rougher None Finisher NFT12-2F H121P 12 Valve 1-1/16-12 UNF-2 Code Omit 1.7 Bar (25 PSI) Bar (65 PSI) Omit Nitrile / (SK12-2) (SK12-2V) 1-1/4" Hex. 76 Nm (56 lb. ft.) Part No. 12P 3/4 NPTF (B12-2-*12P) 8T SE-8 (B12-2-*8T) 12T SE-12 (B12-2-*12T) 12B 3/4 BSPG (B12-2-*12B) *dd for aluminum, omit for steel. 12
3 Catalog HY-351/US Information Cartridge Style Valve. For additional information see Tips on pages 1-4. Valve Series H161P Fully guided poppet for smooth operation ll external parts zinc plated Drop vs. (Through cartridge only) 2 14 Free In Drop ( P) GPM (Q) Rated 225 (6 GPM) 35 Bar (5 PSI) SSU (32 cst) at 35 Bar (5 PSI) ll parts steel. ll operating parts -4 C to C (Nitrile) (-4 F to +2 F) (-25 F to +25 F) of 45 to 2 SSU (6 to 42 cst).27 kg (.6 lbs.) Cavity C16-2 (See Section for more details) Form Tool Rougher None Finisher NFT16-2F Ø 28.5 (1.12) H161P 16 Valve Code Omit.3 Bar (5 PSI) 2 Bar (2 PSI) Bar (65 PSI) Bar (125 PSI) Bar (175 PSI) Omit Nitrile / (SK16-2) Inlet (SK16-2V) let 44.4 (1.75) 1-5/16-12 UN (.51) 1-1/2" Hex. 99 Nm (73 lb. ft.) Part No. 12P 3/4 NPTF (B16-2-*12P) 16P 1 NPTF (B16-2-*16P) 8T SE-8 (B16-2-*8T) 12T SE-12 (B16-2-*12T) 16T SE-16 (B16-2-*16T) 12B 3/4 BSPG (B B) 16B 1 BSPG (B16-2-*16B) * dd for aluminum, omit for steel. Steel body only. 14
4 Catalog HY-351/US Information Cartridge Style Valve. For additional information see Tips on pages 1-4. Valve Series H21P Drop vs. (Through cartridge only) Drop ( P) Fully guided poppet for smooth operation ll external parts zinc plated Rated 33 (8 GPM) 35 Bar (5 PSI) SSU (32 cst) at 35 Bar (5 PSI) ll parts steel. ll operating parts -4 C to C (Nitrile) (-4 F to +2 F) (-25 F to +25 F) of 45 to 2 SSU (6 to 42 cst) GPM (Q).27 kg (.6 lbs.) 189 Cavity C2-2 (See Section for more details) Form Tool Rougher None Finisher NFT2-2F Free Ø 36.4 Inlet let 55.8 (2.2) 1-5/8-12 UN-2 H21P 2 Valve Code Omit.3 Bar (5 PSI) 2 Bar (2 PSI) Bar (65 PSI) Omit Nitrile / (SK2-2) (SK2-2V) 17.7 (.7) In 14.9 (.59) 1-7/8" Hex. 133 Nm (98 lb. ft.) Part No. 2T SE-2 (B2-2-2T) 2B 1-1/4 BSPG (B2-2-2B)
5 Catalog HY-351/US Information Cartridge Style Pilot Operated Valve. For additional information see Tips on pages 1-4. Drop vs. (Through cartridge only) Drop ( P) Internal pilot position simplifies manifold design ll external parts have yellow zinc dichromate. This coating is ideal for salt spray applications Rated 3 (8 GPM) 35 Bar (5 PSI) SSU (32 cst) at 35 Bar (5 PSI) Pilot Ratio 3:1 ll parts steel. ll operating parts -4 C to C (Nitrile) (-4 F to +2 F) (-25 F to +25 F) of 45 to 2 SSU (6 to 42 cst) 8 GPM (Q).9 kg (.2 lbs.) Cavity C1-3 (See Section for more details) Form Tool Rougher NFT1-3R Finisher NFT1-3F 3 8 Pilot Operated Valve Series CPH14P.8 CPH14P 1 P.O. Valve Code 1. Bar ( PSI) Omit 2.1 Bar (31 PSI) Bar (5 PSI) Omit Nitrile / (SK1-3N) (SK1-3V) * dd for aluminum, omit for steel. Steel body only (1.9) Part No. 4P 1/4 NPTF (B1-3-*4P) 6P 3/8 NPTF (B1-3-*6P) 8P 1/2 NPTF (B1-3-*8P) 6T SE-6 (B1-3-*6T) 8T SE-8 (B1-3-*8T) 6B 8B 7/8-14 UNF-2 Cylinder let Valve Inlet Pilot 11.2 (.44) 3/8 BSPG (B1-3-6B) 1/2 BSPG (B1-3-*8B) 1" Hex. 65 Nm (48 lb. ft.) 19
6 Catalog HY-351/US Information Pilot Operated Valve Series CPH124P Cartridge Style Pilot Operated Valve. For additional information see Tips on pages 1-4. Internal pilot position simplifies manifold design ll external parts have yellow zinc dichromate. This coating is ideal for salt spray applications. Drop vs. (Through cartridge only) Cylinder let Valve Inlet Pilot Drop ( P) GPM (Q) Rated 75 (2 GPM) 35 Bar (5 PSI) SSU (32 cst) at 35 Bar (5 PSI) Pilot Ratio 3:1 ll parts steel. ll operating parts -4 C to C (Nitrile) (-4 F to +2 F) (-25 F to +25 F) of 45 to 2 SSU (6 to 42 cst).2 kg (.44 lbs.) Cavity C12-3 (See Section for more details) Form Tool Rougher NFT12-3R Finisher NFT12-3F 76 2 Ø 22.2 (.87) CPH124P 12 P.O. Valve Code Omit 1.7 Bar (25 PSI) Omit Nitrile / (SK12-3) (SK12-3V) 58.9 (2.32) Part No. 8T SE-8 (B12-3-*8T) 12T SE-12 (B12-3-*12T) 8B 1 1/16-12 UNF-2 1/2 BSPG (B12-3-8B) 8.9 (.35) 1-1/4" Hex. 76 Nm (56 lb. ft.) * dd for aluminum, omit for steel. Steel body only. 2
7 Catalog HY-351/US Information Pilot Operated Valve Series D3B125 Pilot to Open, Poppet Type Valve. For additional information see Tips on pages 1-4. Hardened poppet for maximum durability High flow capacity Low leakage - less than 3 drops/min. Sealed pilot Good contamination tolerance Cavity commonality with load control valves Dual line blocks available ll external parts zinc plated Drop vs. (Through cartridge only) 29 2 Drop ( P) Rated (4 GPM) 8 (21 GPM) 7 Bar (1 PSI) (Piloted Open) Leakage at SSU (32 cst) Pilot Ratio 4:1 42 Bar (6 PSI) Less than 3 drops/min. 2 Bar (3 PSI) Steel operating parts, hardened steel poppet. -4 C to C (Nitrile, Buna-N) (-4 F to +2 F) (-25 F to +25 F) of 45 to 2 SSU (6 to 42 cst) Cavity 1 5 Free 2 to 1.24 kg (.528 lbs.) Piloted Open 1 to GPM (Q) 3C (See Section for more details) D3B125 Valve N Nitrile, Buna-N / (SK38N-1) (SK38V-1) 65. (2.56) 1-3/16" - 12 UNF Order Bodies Separately LB1 Line Code ing ing 39 3/4 BSP (Main) 1/4 BSP (ux.) 69 1 SE (Main) 1/4 SE (ux.) 34 3/4 BSP Dual Cavity 234 3/4 SE Dual Cavity S Steel 8. (.31) 35 F Hex. 85 Nm (63 lb. ft.) 3
8 Catalog HY-351/US Information In-Line Valve Series In-Line Style Valve. For additional information see Tips on pages 1-2. () Compact in size In-line mounting Easily adaptable to various applications ll external parts zinc plated (In) let (In) Inlet Inlet Rated (3 GPM) (6 GPM) 27 Bar (3 PSI) SSU (32 cst) at 172 Bar (25 PSI) Steel (Chromate Plated) -4 C to C (-4 F to +2 F) (Nitrile Only) of 45 to 2 SSU (6 to 42 cst) kg (.8 lbs.) kg (1. lbs.) s vs. Drop (Through cartridge only) Drop ( P) Drop ( P) PSI Bar GPM (Q) GPM (Q) 8
9 Catalog HY-351/US In-Line Valve Series Information (1.14) 33.3 (1.31) 23.9 (.94) 57.4 (2.26) 19.1 (.75) (1.29) (1.25) 17/64 Dia. Mounting Holes 5.6 (.22) 26.9 (1.6) 19.3 (.76) 13.7 (.54) 38.1 (1.5) 22.2 (.88) 6 (2.58).7 In-Line Valve Type 4 1/4 JIC 6 SE-6 Code Type 2 SE (#6) 3 Male JIC (1/4 only) 9
DMH085** Series will be available January 1, Catalog HY /US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO.
Catalog HY-/US Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. /GPM BAR/PSI DL8... C8-... Position, Way, N.C. Poppet,... Pull to Open.../8... /... DL... C-... Position, Way, N.C. Poppet,... Pull
P.C. Priority Flow Control Valve Series J02D3. General Description
CV Catalog HY15-352/US General Description Needle Type, Compensated Regulator Valve. For additional information see Tips on pages 1-4. P.C. Priority Control Valve Series J2D3 Features Good adjustment from
Pressure Control Valves
Catalog HY15-351/US Contents RELIEF VALVES SEQUEN VALVES Control SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. /GPM BAR/ DIRECT ACTING RDH42... C4-2... Direct Acting Relief, Poppet Type... 3.8/1...
Catalog HY /US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI
Catalog HY15-352/US Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI PRESSURE RELIEVING AP1B2YP... 2G... Increase /Increase Current...5.3/1.4... 35/5... 7-8 AP2B2YP... C8-2...
Catalog HY /US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI
Catalog HY15-351/US Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI PRESSURE RELIEVING AP1B2YP... 2G... Increase /Increase Current...5.3/1.4... 35/5... 7-8 AP2A2... C8-2... Increase
Check valves Direct and pilot operated check valve functions for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm)
Hydraulic Screw-in Cartridge Valves (SiCV) Check valves Direct and pilot operated check valve functions for applications up to 5 bar (5 psi) and 7 L/min (6 USgpm) Check valves CHECK VALVES... -4 FPR -
Solenoid Valves. Poppet and Spool type solenoid actuated valves for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm) A-1.
Solenoid Valves Poppet and Spool type solenoid actuated valves for applications up to 5 bar (5 psi) and 7 L/min (6 USgpm) n Eaton Brand ETON Screw-In Cartridge Valves E-VLSC-MC-E November 9 -. Solenoid
Directional Control Valves
Overview HYDAC offers several functions of the Directional Control Cartridges. HYDAC Manually operated position, - way normally closed, spring return, directional valve features poppet design. It offers
DOUBLE, P.O. CHECK VALVES (PRE-ENGINEERED BLOCKS)
DOUBLE, P.O. CHECK VALVES (PRE-ENGINEERED BLOCKS) SERIES DOUBLE PILOT OPERATED CHECK VALVE... HS3 Page HD1 Page HD2 SERIES DOUBLE PILOT OPERATED CHECK VALVE GPM PSI LPM BAR CAVITY MODEL PAGE 5 3500 19
Solenoid valves. Poppet and Spool type solenoid actuated valves for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm)
Hydraulic Screw-in Cartridge Valves (SiCV) Solenoid valves Poppet and Spool type solenoid actuated valves for applications up to 5 bar (5 psi) and 7 L/min (6 USgpm) Solenoid valves SOLENOID VLVES...- SV5-8-C/CM
Pressure Control Valves
Control Valves DR8- Reducing/Relieving, Direct Acting, Spool Type 4 gpm (5 l/min) 6 psi (4 bar) Description A screw-in cartridge, direct acting, spool type, pressure reducing/relieving valve with internal
Logic elements. Differential pressure sensing elements for applications up to 350 bar (5000 psi) and 400 L/min (100 USgpm)
Hydraulic Screw-in Cartridge Valves (SiCV) Logic elements Differential pressure sensing elements for applications up to 50 bar (5000 psi) and 400 L/min (00 USgpm) Logic elements LOGC ELEMENTS... -4 APPLCATON
Colorflow and Ball Valves. Industrial Flow Control, Check, Gauge Control. Catalog HY /US
Colorflow and Industrial Flow Control, Check, Gauge Control Catalog HY14-3300/US Colorflow and Fully guided poppets are used on Colorflow valves rather than the less durable ball-check type construction.
PRESSURE CONTROLS TECNORD
Pressure Reducing / Relieving Valves GPM PSI LPM BAR MODEL PAGE 1 4 38 276 DF-PRP 174 2 3 76 27 SK-PRP 176 1 4 38 276 DF-PWP 178 Typical Schematic Typical application for the PRP and PWP is multi-system
Pressure Reducing Valves
5 Pressure Reducing Valves MODEL DESCRIPTION FLOW CAVITY PAGE NO. 3 PRPS-0 PRESSURE REDUCING VALVE GPM C030 5-0.0 3 PRRS-08 PRRS-0 PRRS- 6 GPM GPM 4 GPM C0830 C030 C30 5-0.0 5-0.0 5-03.0 Reference: 50-P-050000-EN-00/09.05
Proportional Valves. Proportional solenoid valves for pressure and flow control B-1.A. An Eaton Brand
Proportional Valves Proportional solenoid valves for pressure and flow control An Eaton rand -.A Proportional Valves Valve Locator/Section Contents Note: Proportional valve solenoid coils and electronic
DRV2-080 Adjustable, Direct-Acting Relief Valve
SOLENOID DRV2-080 Adjustable, Direct-Acting Relief Valve SERIES 8 CHECK MOTION FLOW USASI / ISO ➁ ➀ DESCRIPTION An adjustable, direct-acting poppet cartridge valve designed to limit pressure in hydraulic
Pressure Control Valves. General Description. Specifications. Ordering Information
Catalog HY14-3000/US Technical Information Control Valves Series RCP General escription Series RCP in-line pressure control valves are chiefly used as remote control valves. They limit system pressure
Hydraulic Screw-in Cartridge Valves (SiCV) Proportional valves Proportional solenoid valves for pressure and flow control
Hydraulic Screw-in Cartridge Valves (SiCV) Proportional valves Proportional solenoid valves for pressure and flow control Proportional valves PROPORTIONAL VALVES... - PFRH... -8 EPV...- EPV6...- EPV6A...-7
Check Valves. E Check Valves E-1. Quick Coupling Division 8145 Lewis Road Minneapolis, MN
Check Valves E-1 Check Valves Introduction Multiple Hydraulic System pplications Parker Check Valves are unidirectional flow control devices used primarily in hydraulic systems to eliminate potential damage
GPM PSI LPM BAR MODEL CAVITY PAGE IF-S3A special IF-S3D special IG-S4A special 198
Transmission & Brake Spool Valves Screw-in style GPM PSI LPM BAR MODEL CAVITY PAGE 2 1000 8 70 TC-S3A 5/8-18 186 6 1000 23 70 TF-S3A 7/8-14 188 6 1000 23 70 TF-S3D 7/8-14 190 5 1000 20 70 TG-S4A 7/8-14
SV9A-10-E - Solenoid Valve 4-way, 3-position spool type solenoid valve Up to 36 L/min (9.5 USgpm) 210 bar (3000 psi)
SV9--E - Solenoid Valve -way, -position spool type solenoid valve Up to 6 L/min (9.5 USgpm) bar ( psi) () () (P) (T) In the de-energized position all ports are closed. When solenoid '' is energized flow
Proportional Valves. Proportional solenoid valves for pressure and flow control
Proportional Valves Proportional solenoid valves for pressure and flow control EATON Vickers Screw-In Cartridge Valves V-VLOV-MC-E4 September, 7 - Electro- Proportional Valves Section Contents Typical
Flow Control Valves Check Valves Gauge Control Valves. Colorflow Valves
Check Valves Gauge Control Valves Colorflow Valves Colorflow and Ball Valves Industrial Flow Control, Check, Gauge Control Catalog HY14-3300/US Colorflow and Ball Valves Fully guided poppets are used on
DT (700 Series) Hydraulic Motor
DT (700 Series) Hydraulic Motor shafts 45 60mm Tapered 47 2-1/4 Straight 16.0 [.631] 15.9 [.629] 10.0 [.395] 9.9 [.391] 35 [1.37] 7 [.29] *120 [4.73] 70 [2.75] 38.9 [1.530] 37.6 [1.480] 12.7 [.501] 12.7
MOVICONTROL. Single and Double Fixed Vane Pumps SERIES V10, V20, 25V/VQ, 35V/VQ, 45V/VQ.
Single and Double Fixed Vane Pumps SERIES V10, V20, 25V/VQ, 35V/VQ, 45V/VQ www.movicontrol.com.br V10/V20 Series Features Balanced vane type pumps are excellent for medium- to low-pressure mobile and industrial
Delta Power Company 4484 Boeing Drive - Rockford, IL 61109
4484 Boeing Drive - Rockford, IL 6119 SECTION/Description Pages Logic Elements 4 Page 43 Page 44 4484 Boeing Drive - Rockford, IL 6119 Logic Elements GPM PSI LPM BAR MODEL PAGE 4 3 14 241 SL-PLA 46 4 3
Available manual, pneumatic, and hydraulic spool control kits.
Fitted with a main pressure relief valve and a load check valve on every working section. Available with parallel circuit. Optional carry-over Variety of port valves (auxiliary valves) Available manual,
Pressure Control Valves
CV Catalog HY15-3501/US Contents RELIEF VALVES SEQUEN VALVES Control SERIES CAVITY DESCRIPTION FLOW PRESSURE LPM/GPM BAR/PSI DIRECT ACTING RDH042... C04-2... Direct Acting Relief, Poppet Type... 3.8/1...
Flow Control Valves. Overview. Accessories Catalog. Needle Valves. Flow Control Valves. Pressure Compensated Flow Control Valves.
Overview Needle Valves DV, DVE & DVP Series (see page ) Flow Control Valves DRV & DRVP Series (see page ) Pressure Compensated Flow Control Valves SRVR Series (see page ) Check Valves RV & RVP Series (see
12CS/50CS Series. Coreless Spin-on Filters
12CS/5CS Series Coreless Spin-on Filters 65 12CS/5CS Series Applications Together we can Preserve the environment. Minimize waste and promote energy efficiency. Achieve worldwide filtration solutions.
Check Valves, Size Spherical Poppet-type, Screw-in Design Series RKVE l/min, 350 bar (500 bar)
Check Valves, Size 04... 40 Spherical Poppet-type, Screw-in Design Series RKVE... 360 l/min, 350 bar (500 bar) 1 General 1.1 Product description Series RKVE units are screw-in check valves with mounting
HPV-10 AXIAL PISTON PUMPS
SPECIFICATIONS Variable Displacement, Pressure Compensated OVERALL EFFICIENCY EFFICIENCY - % 1 9 8 7 6 bar 34 69 13 138 172 27 241 TYPICAL PERFORMANCE SPECIFICATIONS VOLUMETRIC cu. in./rev. 1.26 DISPLACEMENT
HPV-15 AXIAL PISTON PUMPS
SPECIFICATIONS Variable Displacement, Pressure Compensated OVERALL EFFICIENCY EFFICIENCY - % 1 9 8 7 6 bar 34 69 13 138 172 27 241 TYPICAL PERFORMANCE SPECIFICATIONS VOLUMETRIC cu. in./rev. 2.9 DISPLACEMENT
BW0511FP. ByWire Elements BW0511FP Flow Sharing Element Interface IBW0511
ywire Elements Flow Sharing Element Interface IW05 efore use, carefully read the GENERL INSTRUCTIONS FOR USE OF DIRECTIONL CONTROL VLVES Technical data Nominal flow Nominal pressure 35 l/min - P=8 bar
NG06. General Size NG6 NG10 Design
Catalog HY14-255/US Series VY*K General Series VY*K pilot operated sequence valves feature proportional adjustment and an external drain. The external drain allows application as both a sequence valve
Proportional Flow-Control Cartridges, Size 5
Proportional Flow-Control Cartridges, Size Q max = l/min, p max = bar, Q N = l/min at p bar Leak free, load compensated, two stage Description Series MVRPLSA two-stage proportional flow-control cartridges
* Optional PRESSURE COMPENSATOR - FLANGED TYPE B A X 2.2. Typical application VR5P with flow control valve
* Veljan 3 ports pressure compensator Valve are designed for improved operation safety and reduced mountg cost. These valves are used to mata a constant pressure drop External PD, External PP Internal
12CS/50CS Series Coreless Medium Pressure Filters
12CS/5CS Series Coreless Medium Pressure Filters 65 12CS/5CS Series Applications Together we can Preserve the environment. Minimize waste and promote energy efficiency. Achieve worldwide filtration solutions.
Vickers. Proportional Valves. EPV10 Series. Proportional Flow Controls. Released 6/95
Vickers Proportional Valves EPV1 Series Proportional Flow Controls Released 6/95 715 Table of Contents Features and Benefits..............................................................................
HPV-15 AXIAL PISTON PUMPS
SPECIFICATIONS Variable Displacement, Pressure Compensated OVERALL EFFICIENCY EFFICIENCY - % 100 90 80 70 60 bar 0 34 69 103 138 172 207 241 TYPICAL PERFORMANCE SPECIFICATIONS VOLUMETRIC cu. in./rev. 2.09
Cartridges & Manifolds
Cartridges & Manifolds SAE Encapsulated Cartridge Meets Performance Requirements of D.O.T. FMVSS 571.106 Meets Dimensional Standards of SAE 2494-4 in 6061-T6 Aluminum Eliminate the space and labor costs
Accessories Series PSB. Specifications
Catalog HY14-252/US Technical Information General Description electrohydraulic pressure switches are high performance devices that provide an electrical signal when sensed pressure rises above or falls
Pressure Control Valves Series R. General Description. Specifications. Flow Data
Catalog Y14-2502/US Technical Information Series R General Description Series R direct relief valves limit system pressure by opening to tank when system pressure reaches the valve setting. Specifications
SECTION 6 - MOTION CONTROL VALVES
CONTENTS SECTION - MOTION CONTROL VALVES This section contains a most extensive range of overcentre and motion control cartridges, including normal, part vented and fully vented versions. Suitable for
PILOT OPERATED PRESSURE CONTROLS - FLANGED TYPE VR5 Series
PILOT OPERTED PRESSURE CONTROLS FLNGED TPE VR5 Series Veljan Flanged type, Valves Series VR5V ( Relief ), VR5U (Unloader) and VR5S (Sequence ) are pilot controls. These range of valves are suitable for
FLOW CONTROL VALVES A5-1 PN# / / ACC
FLOW CONTROL VLVES Flow Control Valves The HYDC family of flow control valves permit safe, simple and repeatable control of hydraulic fluids at operating pressures to psi. The standard slotted control
Housings and Miscellaneous Parts
Housings and Miscellaneous Parts Standard and Special Valve Housings, Orifice Disks, Orifice Sizing harts, Pilot Pistons, dapters, djustment Kits and Seal Kits ETON Vickers Screw-in artridge Valves V-VLOV-M001-E1
2/2 Solenoid Cartridge Valve, Size 10
2/2 Solenoid Cartridge Valve, Size 1 Q max = 8 l/min, p max = 3 bar Seat-valve shut-off, two-stage, monitored operating position 1 Description With integral electronic monitoring of operating position
Industrial Hydraulic Valves. Directional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories. Catalog HY /US
Industrial Hydraulic Valves irectional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories Catalog HY14-25/US Industrial Hydraulic Valves WARNING USER RESPONSIBILITY FAILURE OR IMPROPER
Hydraulic and Pneumatic In-line and Cartridge Insert Control Valves for any fluid or gas.
2010 TECHNICAL CATALOG FROM CONCEPT TO PERFORMANCE... KEPNER VALVES DELIVER ZERO LEAKAGE CONTROL! Hydraulic and Pneumatic In-line and Cartridge Insert Control Valves for any fluid or gas. Kepner Products
Valves. E Valves. Multiple Hydraulic System Applications
s Multiple Hydraulic System Applications Parker Check s are unidirectional flow control devices used primarily in hydraulic systems to eliminate potential damage caused by fluid back pressure. Offered
whitedriveproducts SERIES Hydraulic Motor LIGHT DUTY
SERIES 0-1 - LIHT DUTY Hydraulic Motor RS RS (ll Series) For Light Duty pplications Overview RS Series motors are the most economical model in the White Drive Products product line, but are not low-tech.
Insert Valves Flow control
RE 90010-05/07.2012 Bosch Rexroth Oil Control S.p.A. Insert Valves Flow control Designation Description Cavity Code Data sheet Pages Insert valve flow control, 2-way pressure compensated partially adjustable
Hydraulic Motor & Brake
SERIES 500-501 - 510-511 - 520-521 - 530-531 - 50-51 - MEDIUM DUTY Hydraulic Motor & rake RE RE (ll Series) For Medium Duty pplications Overview series descriptions RE Series motors offer the perfect compromise
PT Series Tank Top Filters
Tank Top Filters 9 Applications Together we can Preserve the environment. Minimize waste and promote energy efficiency. Achieve worldwide filtration solutions. Build global confidence. Redefine new limits.
High Pressure Gear Pumps & Motors Series PZG Pumps Series MZG Motors
High Pressure Gear Pumps & Motors Series PZG Pumps Series MZG Motors Bulletin 650-Z1 High Pressure Gear Pumps and Gear Motors for today s demanding mobile and industrial applications. The PZG and MZG Series
Proportional Valves MODEL DESCRIPTION FLOW CAVITY 4/3 PROPORTIONAL DIRECTIONAL VALVE 8 GPM C1040 PDFC-4M PDFC-4L
Proportional Valves MODEL DESCRIPTION FLOW CAVITY 4 b a PDFC-4M 4/3 PROPORTIONAL DIRECTIONAL VALVE 8 GPM C040 4 3 b a PDFC-4L 3 3 EPRR-0 PROPORTIONAL PRESS. REDUCING/RELIEVING GPM C030 EPRT-08 PROPORTIONAL
PILOT OPERATED SEQUENCE VALVE - Series VR4S
PILOT OPERTED SEQUENCE VLVE - Series VRS Veljan Sequence Valve Series VRS are pilot operated controls and enable a hydraulic system to operate a sequence. Fluid is allowed to pass to a secondary system
Technical Description Can be used in hydraulic systems
Swivel Joints Swivel Joints G-Series Technical escription Can be used in hydraulic systems where rotating connections are essential, for example on accessories with rotating movements. epending on design,
PILOT OPERATED PRESSURE RELIEF VALVE - Series VR4V
PILOT OPERTED PRESSURE RELIEF VLVE - Series VR4V The Veljan Pressure Relief Valve series VR4V are pilot operated and work Internal Dra on the prciple of hydraulic balancg. These valves are used to limit
12CS Series. Coreless Spin-on Filter Max. 75 l/min - 35 bar. Environmentally friendly alternative for spin-on filtration.
Coreless Spin-on Filter Max. 75 l/min - 35 bar Environmentally friendly alternative for spin-on filtration Lightweight, non-metallic element that can be incinerated The features a Parker, replaceable coreless
Valves, Fittings, and Manifolds Catalog. We make things MOVE
Valves, Fittings, and Manifolds Catalog We make things MOVE We Make Things Move A forward-thinking innovator, Bimba provides industry-leading pneumatic, hydraulic and electric motion solutions that are
Catalog HY /NA. Catalog HY /NA. Parker Hannifin Corporation Hydraulic Pump Division Marysville, Ohio USA
Catalog HY28-6/NA PV, PVT Series Piston Pumps Variable Volume Catalog HY28-6/NA 1 Catalog HY28-6/NA Notes Series PV 2 Catalog HY28-6/NA Introduction Series PV Quick Reference Data Chart Pump Delivery Approx.
Control Valves & Valve Accessories
Control Valves & Valve Accessories PNEUMADYNE, INC. Catalog 400 Phone 76-559-077 Fax 76-559-0547 Stainless Steel 0- Fully Ported valve with M5 threads available- contact factory Viton is a registered trademark
36EFC. Series & EFC Valve Package
Engineering & Manufacturing Solutions Specifications: Rated for 0-24 gpm (0-91 lpm) depending on Series 36-38 work sections used. Pressure rating 3000 psi (207 bar). 10 Micron filtration recommended. See
PILOT OPERATED PRESSURE RELIEF VALVE - Series VR4V
PILOT OPERTED PRESSURE RELIEF VLVE - Series VR4V The Veljan Pressure Relief Valve series VR4V are pilot operated and work Internal Dra on the prciple of hydraulic balancg. These valves are used to limit
Sandwich Valves Series CP
Technical Information General Description. pilot operated check valves are designed for maximum flow rates. The valves are typically used in combination with spool type directional control valves to ensure
DENISON HYDRAULICS High Flow Seat Valve Cartridges CEHFE, C1C
DENISON HYDRAULICS High Flow Seat Valve Cartridges CEHFE, C1C 2/2-Way Function / Cavity conform to ISO 7368 (DIN 24342) Publ. 7 EN 5060 A FEATURES, DESCRIPTION FEATURES x High flow cartridges give highest
Motors & Pumps- Hydraulic Pumps, Motors & Power Units
- Hydraulic umps, Motors & ower Units - Rapid Response...12-1 12-6 Hydraulic umps - Check Valves...12-7 Hydraulic umps - ower Units...12-8 12-9 12MOTORS & UMS Hydraulic umps - Vane ump...12-10 Motors...12-11
Catalog Hydraulic Couplings High Pressure
High Pressure 3 Series Threaded Actuation Design Threaded Sleeve The 3 Series coupling are designed for high pressure applications. The coupler sleeve and nipple body must be manually threaded together
NG6. Proportional adjustment. Manifold mounting acc. to ISO External drain. Main stage spool type valve. Pilot stage seated type valve.
Catalog HY14-255/US Technical Information Series VY*K General Description Series VY*K pilot operated sequence valves feature proportional adjustment and an external drain. The external drain allows application
CROSS HYDRAULICS PTY LTD SECTION
OVERVIEW The motor series is an economical alternative to more complex geroler designs that still provides high efficiency across a wide performance range. These motors are intended for medium-duty applications
BML S K IFP BML HIGH TORQUE LOW SPEED MOTORS. Model code. Model. High Performance in an economical package
IFP HIGH TORQUE LOW SPEED MOTORS High Performance in an economical package International motors provide high output torque from an efficient compact design. Motors are available with displacements from
Chapter 5: Flow Valves
Catalogue HY11-300/UK Contents Chapter : Flow Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/4 3/8 1/2 3/4 1 06 10 16 Throttle valves, manual adjustment MVI -2 NS -4 FS With free
Technical Information. Check Valves. E Check Valves. Selection Guide. Features. Crack Pressure. Applications E-4
Technical Information Pressure at inlet port. Poppet is moved off seat. low is allowed through valve. Selection Guide Seat Poppet Rated Crack Body Size Material Pressure Pressure CV Series 1/4-1" Steel
Full Range Pressure Compensating Variable Flow Control
Engineering & Manufacturing Solutions Specifications: See flow chart for capacity. Rated for 3000 psi (207 bar). Weighs 7- ¾ lbs. (3.52 kg). 30-Micron Filtration Recommended. Torque to turn side lever
Low Pressure Filters
MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM Hydraulic Symbol /80/85/160/180 MF 90/95/190/195 A A B B Features MF Filters are manufactured with an aluminum head. Choice of NPT, SAE straight
PILOT OPERATED UNLOADING VALVE - Series VR4U
PILOT OPERTED UNLODING VLVE - Series VR4U Veljan Unloadg Valves series VR4U are pilot operated controls and used to Internal Dra unload a circuit at low pressure when pilot pressure at pt is mataed higher
VJL Functional Description. Ordering Code VJL Spare Parts HA /2002. Logical 3-way check valves. Replaces HA /2001
Logical 3-way check valves VJL2-304 HA 5007 3/2002 Size 04 p max up to 210 bar Q max up to 15 L/min Replaces HA 5007 6/2001 Screw-in cartridge valve For leak-free applications Simple design High reliability
PILOT OPERATED PRESSURE CONTROLS - FLANGED TYPE VR5 Series
PILOT OPERTED PRESSURE CONTROLS FLNGED TPE VR5 Series Veljan Flanged type, Valves Series VR5V ( Relief ), VR5U (Unloader) and VR5S (Sequence ) are pilot controls. These range of valves are suitable for
500 Series Adjustable Popoff & Inline Relief Valves.5 to 150 PSIG
Fred C. Gilbert Co. 106 Norris Road Bakersfield, Ca. 93308 661-399-9569 fax 661-393-9654 Adjustable Popoff & Inline Relief Valves.5 to 150 PSIG Features Popoff or Inline Valves Adjustable Crack Pressure
Quick couplers. Chapter H. Quick couplers
Table of contents Chapter Rogan series 30,000 psi maximum working pressure P006 Coupler... -3 P006 Nipple (without check valve)... -4 P006 Nipple (with check valve)... -5 P010 Coupler... -6 P010 Nipple
Content. How to Order... Custom Worksheet... Cmmon Application Circuits... Typical Central Manifold, Cavities and Valves Central Manifold...
HYDRAULIC Compact Power Unit Super Nutech Supply Inc, 2008-2009 Copyright Superior Nutech Supply Inc, 2008-2009 Copyright Ontario, Canda Ontario, Canada WWW.SUPERIORNUECH.COM WWW.SUPERIORNUECH.COM i Content
whitedriveproducts SERIES Hydraulic Motor LIGHT DUTY
whitedriveproducts SERIES 275-276 - 277-278 - 280-281 - LIGHT DUTY Hydraulic Motor www.cenhyd.com 1(800)264-9571 WG WG (ll Series) For Light Duty pplications whitedriveproducts overview The White Drive
CHECK VALVE - DIRECT OPERATED - Series VC4V SPECIFICATIONS PERFORMANCE CURVES VC4V03 VC4V10 VC4V06
CHECK VLVE - DIRECT OPERTED - Series VV Veljan Direct operated Check Valve Series VV are poppet type and designed for a maximum pressure of 35 bar and a flow capacity rangg from 18 l/m for a 3/8 valve
Pilot Operated Directional Control Valves Series D31DW, D31NW, D*1VW
Characteristics The pilot operated valves are available in 4 sizes: D31DW NG10 (standard) D31NW NG10 (high flow) D41VW NG16 D81VW NG5 (for port diameter up to 6 mm) D91VW NG5 (for port diameter up to 3
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)
Features MF Filters are manufactured with an aluminum head. MF, MFD, MFDS Series Spin-On Filters Choice of NPT, SAE straight thread O-ring boss, BSPP, and SAE 4-bolt flange porting to allow easy installation
550 Series Hydraulic Power Units. Pressures to 207 bar (3000 psi) Flows to 11.4 lpm (3 gpm)
Pressures to 207 bar (3000 psi) Flows to 11.4 lpm (3 gpm) 19 Power Unit Features We are pleased to introduce our new C hydraulic power units. The combines the features and benefits our customers and markets
Heavy Duty Hydrostatic Transmissions
Heavy Duty Hydrostatic Transmissions Features and Benefits Typical Applications Construction Transit Mixer Road Roller Paver Motor Grader Loader Dozer Material Handling & Utility Crane Sweeper Lift Truck
3 Composite Right Angle Flow Control Valves NPTF/Inch Series TMCU, TMVU, TMCO
Flow Control Valves NPTF NORTH AMERICAN FITTINGS & FLOW CONTROL VALVE CATALOG > Release 8.6 Composite Right Angle Flow Control Valves NPTF/Inch Series TMCU, TMVU, TMCO Swivel Design: Meter-Out, Meter-In
IFP HIGH PERFORMANCE INDUSTRIAL SINGLE INTRA-VANE PUMPS
IFP HIGH PERFORMANCE INDUSTRIAL SINGLE INTRA-VANE PUMPS * High Volumetric Efficiency * Maximum 3000 PSI operating pressure * Twelve Vane Design for quite operation * Hydraulic Balanced for external life
SECTION 15 Breakaway Couplers
SECTION Breakaway Couplers Make Model Page Intertraco Intertraco Intertraco Intertraco Intertraco Intertraco Series A & B Breakaway Couplers Series J, N & P Breakaway Couplers Series E & S Breakaway Couplers
CLS100 Proportional Load Sensing Mobile Valve
Mobile Valves Proportional - Load Sensing Model CLS100 350 bar 100 L/min Up to 10 sections Eaton Pro-FX TM Compliant CLS100 Proportional Load Sensing Mobile Valve Overhaul manual / Trouble shooting guide
Sprague. Advanced Air Driven Pump System
Sprague Advanced Air Driven Pump System ADVANCED AIR DRIVEN PUMP SYSTEM HIGH EFFICIENCY AIR VALVE Will not hang-up More liquid flow (less air consumption) INTERNAL MUFFLER Reduces noise Minimizes icing
3-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow
3-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow A-VRFC3C-VEI-VS-LS 0M.43.21.80 - Y - Z RE 18309-63 Edition: 03.2018 Replaces: 03.2016 Technical
Chapter 6: Check Valves
Contents Chapter : Check Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 0 10 1 25 32 Subplate Screw-in Slip-in SSR RK / RB CS SPZBE SPV / SPZ C4V CPS C4V D4S
whitedriveproducts SERIES Hydraulic Motor LIGHT DUTY
whitedriveproducts SERIES 145-146 - LIGHT DUTY Hydraulic Motor www.cenhyd.com 1(800)264-9571 WD WD (All Series) whitedriveproducts overview The WD motor series is an economical solution for light duty
white drive products SERIES HYDRAULIC MOTORS
white drive products WR SERIES HYDRULIC MOTORS WR overview The WR Series motor incorporates the latest advances for smooth performance, efficiency and durability. It features an optimized Roller Stator
Neoprene. Steel or Brass
The low air inclusion product line is designed for air conditioning, refrigerant, gaseous and fluid transfer applications. Product Features connections for versatility of installation on tubing or hose