Solenoid Valves. Poppet and Spool type solenoid actuated valves for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm) A-1.

Transcription

1 Solenoid Valves Poppet and Spool type solenoid actuated valves for applications up to 5 bar (5 psi) and 7 L/min (6 USgpm) n Eaton Brand ETON Screw-In Cartridge Valves E-VLSC-MC-E November 9 -.

2 Solenoid Valves Section Contents/Valve Locator Model Solenoid Valves - Section Overview...-7 Coils...-8 Functional Symbol Flow Typical Model Cavity Rating Pressure Page Solenoid /, NC, poppet L/min (USgpm) bar (psi) SV5-8-C C-- (6) () - SV5-8-C C-8-7 () 5 (5) - SV--C C-- 5 () () -6 SV--C C-- 5 () 5 (5) -5 SV--C C-- (6) 5 (5) -6 Page Flow Typical Model Cavity Rating Pressure Page Solenoid /, NC, bi-directional, poppet L/min (USgpm) bar (psi) SBV-8-C C-8- (.5) () -6 SBV-8-C C-8- (.5) 5 (5) - S7 879 (.6) () - Flow Typical Model Cavity Rating Pressure Page Solenoid /, NC, bi-directional, poppet L/min (USgpm) bar (psi) SBV-8-C C-8-6 (5) () -6 SBV-8-C C-8-6 (5) 5 (5) - SBV--C C-- 76 () () -76 SBV--C C-- 76 () 5 (5) -8 SBV--C C--/U () () -6 SBV--C C--/U () 5 (5) - Flow Typical Model Cavity Rating Pressure Page Solenoid /, NC, poppet L/min (USgpm) bar (psi) SV--C C-- 5 () () -7 SV--C C-- 5 () 5 (5) -7 SV--C C-- () () -9 SV--C C-- () 5 (5) - SV-6-C C-6- (5) () - SV-6-C C-6- (5) 5 (5) - SV--C C-- 7 (6) () - SV--C C-- 7 (6) 5 (5) - Flow Typical Model Cavity Rating Pressure Page Solenoid /, NC, spool L/min (USgpm) bar (psi) SV-8-C C-8- () () -5 SV-8-C C-8- () 5 (5) -6 SV--C C-- (6) () -7 SV--C C-- (6) () -76 Flow Typical Model Cavity Rating Pressure Page Solenoid /, NO, poppet L/min (USgpm) bar (psi) S7 879 (.5) 5 (5) ETON Screw-In Cartridge Valves E-VLSC-MC-E November 9 n Eaton Brand

3 Solenoid Valves Valve Locator Functional Symbol (ct) (T) (P) Flow Typical Model Cavity Rating Pressure Page Solenoid /, NO, poppet L/min (USgpm) bar (psi) SV5-8- C-8- (6) () -9 SV5-8-O C-8-7 () 5 (5) - SV5--O C-- 5 () () -6 SV5--O C-- 5 () 5 (5) - Flow Typical Model Cavity Rating Pressure Page Solenoid /, NO, bi-directional, poppet L/min (USgpm) bar (psi) SBV-8-O C-8-6 (5) 5 (5) - SBV--O C-- 76 () 5 (5) -5 SBV--O C--/U () 5 (5) -8 Flow Typical Model Cavity Rating Pressure Page Solenoid /, NO, poppet L/min (USgpm) bar (psi) SV--O C-- 5 () () - SV--O C-- 5 () 5 (5) - SV--O C--/U () () -6 SV--O C--/U () 5 (5) -7 SV-6-O C-6- (5) () -9 SV-6-O C-6- (5) 5 (5) - SV--O C-- 7 (6) () - SV--O C-- 7 (6) 5 (5) - Flow Typical Model Cavity Rating Pressure Page Solenoid /, NO, spool L/min (USgpm) bar (psi) SV-8-O C-8- () () - SV-8-O C-8- () 5 (5) - SV--O C-- (6) () -5 SV--O C-- (6) 5 (5) -6 Flow Typical Model Cavity Rating Pressure Page Solenoid /, spool L/min (USgpm) bar (psi) SV-8- C-8- () () -9 SV-- C-- (6) () -58 S5N C-- () () -5 SV/B-- C-- () () -6 SV/B-- C-- () 5 (5) -6 Flow Typical Model Cavity Rating Pressure Page Solenoid /, poppet L/min (USgpm) bar (psi) S9 5 () () -5 Flow Typical Model Cavity Rating Pressure Page Solenoid /, spool L/min (USgpm) bar (psi) S5N C-- () () -5 n Eaton Brand ETON Screw-In Cartridge Valves E-VLSC-MC-E November 9 -.

4 Solenoid Valves Valve Locator Functional Symbol Flow Typical Model Cavity Rating Pressure Page Solenoid /, spool L/min (USgpm) bar (psi) S55N C-- (8) () -5 (T) Flow Typical Model Cavity Rating Pressure Page Solenoid /, spool L/min (USgpm) bar (psi) S56N- C-- 5 (9) () -5 Flow Typical Model Cavity Rating Pressure Page Solenoid /, spool L/min (USgpm) bar (psi) SV-8- C-8- () () -7 SV-8- C-8- () 5 (5) -8 SV-- C-- (6) () -55 SV-- C-- (6) 5 (5) -56 Flow Typical Model Cavity Rating Pressure Page Solenoid /, spool L/min (USgpm) bar (psi) SV/B-- C-- (6) 5 (5) -57 SV/B-- C-- 8- (-) () -59 SV/B-- C-- 8 () 5 (5) -6 Flow Typical Model Cavity Rating Pressure Page Solenoid /, spool L/min (USgpm) bar (psi) SV/B-- C-- -8 (8-) () -6 SV/B-- C-- (8) 5 (5) -6 Flow Typical Model Cavity Rating Pressure Page Solenoid /, spool L/min (USgpm) bar (psi) SV-8- C-8- () () -65 SV-8- C-8- () 5 (5) -66 SV-- C-- (6) () -69 SV-- C-- (6) 5 (5) -7 S5 C-- 5 (9) () ETON Screw-In Cartridge Valves E-VLSC-MC-E November 9 n Eaton Brand

5 Solenoid Valves Valve Locator Functional Symbol Flow Typical Model Cavity Rating Pressure Page Solenoid /, spool L/min (USgpm) bar (psi) SV-8- C-8- () () -67 SV-8- C-8- () 5 (5) -68 SV-- C-- (6) () -7 SV/B-- C-- () () -79 SV/B-- C-- () 5 (5) -8 S5 C-- (8) () -7 Flow Typical Model Cavity Rating Pressure Page Solenoid /, spool L/min (USgpm) bar (psi) SV-- C-- (6) () -7 SV/B-- C-- 5 () () -8 SV/B-- C-- 5 () 5 (5) -8 Flow Typical Model Cavity Rating Pressure Page Solenoid /, spool L/min (USgpm) bar (psi) SV-- C-- (6) () -75 Flow Typical Model Cavity Rating Pressure Page Solenoid /, spool L/min (USgpm) bar (psi) SV5-- C-- (6) () -76 SV5/B-- C-- 6 () () -8 SV5/B-- C-- 5 () 5 (5) -8 Flow Typical Model Cavity Rating Pressure Page Solenoid /, spool L/min (USgpm) bar (psi) SV7/B-- C-- (6) 5 (5) -78 Flow Typical Model Cavity Rating Pressure Page Solenoid /, spool L/min (USgpm) bar (psi) SV7-- C-- 7 (5) () -77 SV7/B-- C-- 6 () () -85 SV7/B-- C-- 6 () 5 (5) -86 n Eaton Brand ETON Screw-In Cartridge Valves E-VLSC-MC-E November 9-5.

6 Solenoid Valves Valve Locator Functional Symbol () (B) B (P) (T) () (B) B (P) (T) Flow Typical Model Cavity Rating Pressure Page Solenoid /, spool L/min (USgpm) bar (psi) SV9-8-E C-8- () () -87 Flow Typical Model Cavity Rating Pressure Page Solenoid /, spool L/min (USgpm) bar (psi) SV9--E C-- (5.8) () -9 B () (B) (P) (T) Flow Typical Model Cavity Rating Pressure Page Solenoid /, spool L/min (USgpm) bar (psi) SV9-8-F C-8- () () -87 B () (B) (P) (T) Flow Typical Model Cavity Rating Pressure Page Solenoid /, spool L/min (USgpm) bar (psi) SV9--F C-- 5 (6.5) () -9 B () (B) (P) (T) Flow Typical Model Cavity Rating Pressure Page Solenoid /, spool L/min (USgpm) bar (psi) SV9-8-B C-8-. (.5) () -87 B () (B) (P) (T) Flow Typical Model Cavity Rating Pressure Page Solenoid /, spool L/min (USgpm) bar (psi) SV9--B C-- (8.9) () -9 B () (B) (P) (T) Flow Typical Model Cavity Rating Pressure Page Solenoid /, spool L/min (USgpm) bar (psi) SV9-8- C-8-. (.) () -87 B () (B) (P) (T) Flow Typical Model Cavity Rating Pressure Page Solenoid /, spool L/min (USgpm) bar (psi) SV9-- C-- 5 (6.5) () ETON Screw-In Cartridge Valves E-VLSC-MC-E November 9 n Eaton Brand

7 Solenoid Valves Section Overview Quality Products and Innovative Solutions This catalog gives basic specifications for the full line of Eaton's Integrated Hydraulics screw-in cartridge solenoid valves. Its purpose is to provide a quick, convenient reference tool when choosing Eaton's Integrated Hydraulics cartridge valves or designing a system using these components. Two pressure ratings are shown for all products featured in this catalog - typical application pressure and fatigue pressure. The typical application pressure rating is the maximum recommended operating pressure for the valve in a given system. The fatigue pressure rating is the pressure for the valve to be free for infinite life from metal fatigue. Eaton's Integrated Hydraulics solenoid valves are offered with the widest choice of flow paths and position options to satisfy most requirements. These options include: -way, -position, normally open and normally closed spool and poppet valves -way, -position spool valves -way, -position spool valves -way, -position spool valves Valve Features and Benefits Products in this catalog have been fatigue tested for one million cycles at % or million cycles at 5% of rated pressure Rated flows up to 7 L/min (6 USgpm) Poppet and spool designs Standard cartridge cavities ll operating parts are hardened steel, ground and honed for long life and low leakage Cartridge design for maximum flexibility and minimal manifold space requirements Optional low-cost manual override is available on selected models ll exposed surfaces are zinc dichromate plated to resist corrosion ll aluminum manifolds are gold anodized to resist corrosion Reliable, economical and compact Manual override options are available on all solenoid valves except SBV series valves Note: Solenoid valve coil details are shown in section C. n Eaton Brand ETON Screw-In Cartridge Valves E-VLSC-MC-E November 9-7.

8 Solenoid Valves Coils Coil Features and Benefits The solenoid operated directional valves in this catalog are offered with a choice of standard voltages and several types of electrical connections. For other coil ratings and connections, consult your Eaton representative. Standard C coils are internally rectified to supply them with DC current, therefore they have no "inrush" current value. Coils are rated for continuous duty Coils are interchangeable for serviceability Variety of voltages and terminations Coils offer a one-piece weather-proof encapsulated design, eliminating the need for extra seals C voltage coils are internally full-wave rectified for 5 to 6 cycle (Hz) applications n arc suppression diode molded into the coil is available as a standard option on DC coils. lso available, are explosion-proof coils and cartridges that are CS approved and recognized by the US Underwriters Laboratories. Protection of Internally Rectified Coils The rectifiers used in these coils may require protection from high voltage surges in some electrical circuits containing highly inductive or capacitive components, These include certain types of motors, solenoids, relays, and transformers. Protection is simple and inexpensive. It consists of installing a commercially available voltage surge suppressor like the General Electric MOV varistor VL for 5 volts C or the V5L for volts C, across the C line supplying the rectified components. single suppressor will normally protect all of the rectified components in the circuit, as shown in the surge suppressor circuit diagram below. Surge Suppressor Circuit Diagram Note: Solenoid valve coil details are shown in section C. C line Voltage surge suppressor (MOV varistor) Rectified components ll voltage surge producing components must be installed on this side of suppressor. Switches on relay contacts only. Relay coils must be connected on the line side of the surge suppressor. No inductive or capacitive loads can be installed between the surge suppressor and rectified valves without additional precautions. CUTION Coils may be hot to touch if used in continuous applications. WRNING Maintain in 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Overtightening may cause valve or coil failure. WRNING pplication of these products beyond published performance specifications may cause valve malfunction which may result in personal injury and/or damage to the machine. -8. ETON Screw-In Cartridge Valves E-VLSC-MC-E November 9 n Eaton Brand

9 - dditional products, product lines, and services offered by Eaton - Don t Let brasion Stop You From Getting The Job Done. Get dded Protection with Weatherhead Spring Guard nd brasion Sleeve From Eaton brasion Sleeve Part Numbers: 9 & 9 Series Spring Guard Part Numbers: 9 Series Spring Guard and brasion Sleeve Details Features and Benefits Heavy duty defense against cuts and abrasion Sleeve can also be used to bundle two or more hose assemblies for protection and clean routing Guard helps prevent kinks and crushing of hose assemblies Prevents accidental damage and prolongs hose assembly life dditional Information For additional part number information please see the Hose Sleeves and Guards portion of the ccessory section of the Weatherhead Hose ssembly Master Catalog, or contact your local Heavy Duty District Sales Manager today. n Eaton Brand ETON Screw-In Cartridge Valves E-VLSC-MC-E November 9-9.

10 SV5-8-C/CM - Solenoid Valve Poppet type, normally closed solenoid valve L/min (6 USgpm) bar ( psi) Operation In the de-energized position the valve blocks flow from port to and free flow is allowed from port to. When the solenoid is energized the pilot poppet is pulled off the seat allowing the valve to open from port to. in the reverse direction the flow is restricted by the pilot orifice. Features Hardened and ground working parts. Lapped seat for low leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low pressure drop. Sectional View Performance Data Ratings and Specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) bar ( psi) Cartridge fatigue pressure (infinite life) bar ( psi) Rated flow L/min (6 USgpm) Internal leakage less than 5 bar ( psi) Coil duty Continuous from 85% to % of nominal voltage Response times (% rated voltage and flow) Energize: 8 ms De-Energize: 6 ms Temperature range - to C (- to 8 F) Cavity C-8- Fluids ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) luminum Weight including coil,8 kg (.6 lbs) Seal kit (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way, -position, poppet type, pilot operated, normally closed solenoid valve. This valve is used in applications requiring low leakage, such as load holding applications or as a general purpose diverter or dump valve. Pressure Drop Cartridge only Pressure Drop - psi 5 5 Flow - L/min (,8 cst 9 C) 8 6 B 8 Pressure Drop - bar 5 6 Flow - USgpm (5 SUS F) - Port to port de-energized B - Port to port energized -. ETON Screw-In Cartridge Valves E-VLSC-MC-E December 9 n Eaton Brand

11 SV5-8-C/CM - Solenoid Valve Poppet type, normally closed solenoid valve L/min (6 USgpm) bar ( psi) Model Code SV5 8 (V) C (M) (F) () ** **** * S Function SV5 - Solenoid valve Size 8-8 size Seal Material Blank - Buna-N V - Viton Style C - Normally closed 5 Manual Override Option Blank - No manual override M - Knob type For valve dimensions with manual override option installed see page Filter Option Blank - None F - Filter screen 8 Port Size 7 Valve Housing Material Omit for cartridge only - luminum Code Port Size Housing Number Cartridge only G /" BSPP -677 G /8" BSPP -678 T SE -67 6T SE T SE 8-67 See section J for housing details. 9 Voltage Rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. Connector Types G - ISO DIN 65 Q - Spade terminals W - Flying lead N - Deutsch Y - mp JR D - Metripack 5 male J - Metripack 8 male Coil Series S - 8 series, W For coil part numbers and dimensions see section C. Special Features - None (Only required if valve has special features, omitted if.) Dimensions mm (inch) Cartridge Only Torque cartridge in aluminum housing - Nm (5- ft lbs) 6, (.) Note: When solenoid valve is ordered as cartridge only, coil nut is included. Installation Drawing Ø,7 (.5) 58. (.) 58, (.) 9, (.75) hex 5.8 (.) 8. (.5) 5.5 (.6) X 7. (.8) 9. (.75). (.). (.7) 5.8 (.) 7,6 (.8) Ø,6 (.5).75-6 Thd. WRNING Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. n Eaton Brand ETON Screw-In Cartridge Valves E-VLSC-MC-E December 9 -.

12 SV5-8-C/CM - Solenoid Valve Poppet type, normally closed solenoid valve 7 L/min ( USgpm) 5 bar (5 psi) Sectional View Operation In the de-energized position the valve blocks flow from port to and free flow is allowed from port to. Performance Data Ratings and Specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) 5 bar (5 psi) Cartridge fatigue pressure (infinite life) bar (5 psi) Rated flow 7 L/min ( USgpm) Internal leakage, port to port 5 drops/min, bar ( psi) Temperature range - to C (- to F) Coil duty Continuous from 85% to % of nominal voltage Cavity C-8- Fluids ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) Steel Weight cartridge only, kg (.5 lbs) Seal kit (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont When the solenoid is energized the pilot poppet is pulled off the seat allowing the valve to open from port to. in the reverse direction the flow is restricted by the pilot orifice. Features Hardened and ground working parts. Lapped seat for low leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low pressure drop. 5 bar working pressure. Description This is a -way, -position, poppet type, high pressure, pilot operated, normally closed solenoid valve. This valve is used in applications requiring low leakage, such as load holding applications or as a general purpose diverter or dump valve. Pressure Drop Cartridge only Pressure Drop - psi Flow - L/min (,8 cst 9º C) B 6 8 Pressure Drop - bar 6 8 Flow - USgpm (5 SUS F) - Port to port B - Port to port -. ETON Screw-In Cartridge Valves E-VLSC-MC-E December 9 n Eaton Brand

13 SV5-8-C/CM - Solenoid Valve Poppet type, normally closed solenoid valve 7 L/min ( USgpm) 5 bar (5 psi) Model Code SV5 8 (V) C (M) (S) ** **** * P Function SV5 - Solenoid valve Size 8-8 size Seal Material Blank - Buna-N V - Viton Style C - Normally closed 5 Manual Override Option Blank - No manual override M - Manual override For valve dimensions with manual override option installed see page Valve Housing Material Blank - Cartridge only S - Steel 7 Port Size Code Port Size Housing Number Cartridge only G /" BSPP -67 G /8" BSPP -67 T SE T SE T SE See section J for housing details. 8 Voltage Rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 9 Connector Types G - ISO DIN 65 Q - Spade terminals W - Flying lead N - Deutsch Y - mp JR D - Metripack 5 male J - Metripack 8 male Coil Series P - 8 series, W For coil part numbers and dimensions see section C. Special Features - None (Only required if valve has special features omitted if. ) Dimensions mm (inch) Cartridge Only Torque cartridge in aluminum or steel housing - Nm (5- ft lbs) 6, (.) Note: When solenoid valve is ordered as cartridge only, coil nut is included. Installation Drawing Ø,7 (.5) 58. (.) 58, (.) 9, (.75) hex 5.8 (.) 8. (.5) 5.5 (.6) X 7. (.8) 9. (.75). (.). (.7) 5.8 (.) 7,6 (.8) Ø,6 (.5).75-6 Thd. WRNING Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. n Eaton Brand ETON Screw-In Cartridge Valves E-VLSC-MC-E December 9 -.

14 SBV-8-C - Solenoid Bi-directional Valve Bi-directional, normally closed solenoid valve (low flow version) L/min (.5 USgpm) bar ( psi) Operation In the de-energized position the valve is blocked in both directions. When the solenoid is energized the poppet is released from the seat allowing flow in both directions. Features Hardened and ground working parts. IP69K Tough coil compatibility. Continuously rated. Compact design with low pressure drop. Sectional View Performance Data Ratings and Specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) bar ( psi) Cartridge fatigue pressure (infinite life) bar ( psi) Rated flow L/min (.5 USgpm) Internal leakage, port to port and port to port 5 drops/min, 5 bar (5 psi) Temperature range - to C (- to F) Coil duty Continuous from 85% to % of nominal voltage Cavity C-8- Fluids ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) luminum or steel Weight cartridge only, kg (.6 lbs) Seal kit (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way -position, low flow, high pressure bi-directional, normally closed poppet type screw in cartridge valve. The valve is ideal for isolating and holding actuators in position or blocking pilot lines. Pressure Drop Cartridge only Pressure Drop - psi 6 5 Flow - L/min (,8 cst 9 C),,8,,6 Pressure Drop - bar Flow - USgpm (5 SUS F) -6. ETON Screw-In Cartridge Valves E-VLSC-MC-E December 9 n Eaton Brand

15 SBV-8-C - Solenoid Bi-directional Valve Bi-directional, normally closed solenoid valve (low flow version) L/min (.5 USgpm) 5 bar (5 psi) Model Code SBV 8 (*) C (*) ** **** * P Function SBV - Solenoid valve Size 8-8 size Seal Material Blank - Buna-N V - Viton Style C - Normally closed 5 Valve Housing Material Blank - Cartridge only - luminum S - Steel 6 Port Size Code Port Size Housing Number Cartridge only 7 Voltage Rating - No coil D - VDC D - VDC 6D - 6VDC luminium Steel G /" BSPP G /8" BSPP T SE T SE T SE See section J for housing details. - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 8 Connector Types G - ISO DIN 65 Q - Spade terminals W - Flying lead N - Deutsch Y - mp JR D - Metripack 5 male J - Metripack 8 male 9 Coil Series P - 8 series, W For coil part numbers and dimensions see section C. Special Features - None (Only required if valve has special features omitted if "".) Dimensions mm (inch) 6, (.) Torque cartridge in aluminum or steel housing - Nm (5- ft lbs). Note: When solenoid valve is ordered as cartridge only, coil nut is included. Cartridge Only Installation Drawing (luminum) Ø,7 (.5) 9, (.75) hex 58. (.) 58, (.) 5.8 (.) 8. (.5) 5.5 (.6) X 7. (.8) 9. (.75) 7,7 (.9), (.87) hex Ø,6 (.97).75-6 Thd.. (.). (.7) 5.8 (.) WRNING Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. WRNING luminum housings can be used for pressures up to bar ( psi). Steel housings must be used for operating pressures above bar ( psi). n Eaton Brand ETON Screw-In Cartridge Valves E-VLSC-MC-E December 9-7.

16 SBV-8-C - Solenoid Bi-directional Valve Bi-directional, normally closed solenoid valve (low flow version) L/min (.5 USgpm) 5 bar (5 psi) Operation In the de-energized position the valve is blocked in both directions. When the solenoid is energized the poppet is released from the seat allowing flow in both directions. Features Hardened and ground working parts. IP69K Tough coil compatibility. Continuously rated. Compact design with low pressure drop. 5bar working pressure. Sectional View Performance Data Ratings and Specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) 5 bar (5 psi) Cartridge fatigue pressure (infinite life) bar (5 psi) Rated flow L/min (.5 USgpm) Internal leakage, port to port and port to port 5 drops/min, 5 bar (5 psi) Temperature range - to C (- to F) Coil duty Continuous from 85% to % of nominal voltage Cavity C-8- Fluids ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) luminum or steel Weight cartridge only, kg (.6 lbs) Seal kit (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way -position, low flow, high pressure bi-directional, normally closed poppet type screw in cartridge valve. The valve is ideal for isolating and holding actuators in position or blocking pilot lines. Pressure Drop Cartridge only Pressure Drop - psi 6 5 Flow - L/min (,8 cst 9 C),,8,,6 Pressure Drop - bar Flow - USgpm (5 SUS F) -. ETON Screw-In Cartridge Valves E-VLSC-MC-E December 9 n Eaton Brand

17 SBV-8-C - Solenoid Bi-directional Valve Bi-directional, normally closed solenoid valve (low flow version) L/min (.5 USgpm) 5 bar (5 psi) Model Code SBV 8 (*) C (*) ** **** * P Function SBV - Solenoid valve Size 8-8 size Seal Material Blank - Buna-N V - Viton Style C - Normally closed 5 Valve Housing Material Blank - Cartridge only - luminum S - Steel 6 Port Size Code Port Size Housing Number Cartridge only 7 Voltage Rating - No coil D - VDC D - VDC 6D - 6VDC - VC luminium Steel G /" BSPP G /8" BSPP T SE T SE T SE See section J for housing details. 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 8 Connector Types G - ISO DIN 65 Q - Spade terminals W - Flying lead N - Deutsch Y - mp JR D - Metripack 5 male J - Metripack 8 male 9 Coil Series P - 8 series, W For coil part numbers and dimensions see section C. Special Features - None (Only required if valve has special features omitted if "".) Dimensions mm (inch) 6, (.) Torque cartridge in aluminum or steel housing - Nm (5- ft lbs). Note: When solenoid valve is ordered as cartridge only, coil nut is included. Cartridge Only Installation Drawing (Steel) Ø,7 (.5) 9, (.75) hex 58. (.) 58, (.) 5.8 (.) 8. (.5) 5.5 (.6) X 7. (.8) 9. (.75). (.). (.7) 5.8 (.) 7,7 (.9), (.87) hex Ø,6 (.97).75-6 Thd. WRNING Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. WRNING luminum housings can be used for pressures up to bar ( psi). Steel housings must be used for operating pressures above bar ( psi). n Eaton Brand ETON Screw-In Cartridge Valves E-VLSC-MC-E December 9 -.

18 S7 - Directional Control Valve Bi-directional, normally closed poppet solenoid valve Up to L/min (.6 USgpm) Up to bar ( psi) Operation Features Sectional View In the de-energized position the valve is blocked in both directions. When the solenoid is energized the poppet is pushed off the seat allowing flow in both directions. Very low leakage poppet design. Standard valve bodies and common cavities. One-piece encapsulated coil with minimal amperage draw. Various coil terminals and voltages. Coil interchangeability with valves of same series. Manual override, seal variations and other options available. Oil immersed armature solenoid. Sealed coil arrangement to protect stem from corrosion. Description This is a direct acting, electrically operated way position normally closed poppet style screw in cartridge valve. Ideal for load holding and load lowering applications. Performance Data Ratings and Specifications Performance data is typical with fluid at Viscosity cst (5 SSU) Typical application pressure bar ( psi) Rated flow Up to L/min (.6 USgpm) Nominal flow L/min (.6 USgpm) Internal leakage Less than.6 ml/min ( dpm) bar differential at cst Temperature range - to + C (- to +8 F) Cavity 879 (see Section M) Electrical data See coil data sheet Torque cartridge into cavity Nm (5 lbs ft) Mounting position Unrestricted Fluids ll general purpose hydraulics fluids such as: MIL-H-566, SE, SE etc Seal material Standard nitrile with PTFE back up rings Filtration BS55/ Class 8/ (5 micron or better) Nominal viscosity range 5 to 5 cst Standard housing materials luminium alloy Coil weight. kg (. lbs) Cartridge weight. kg (. lbs) Seal kit SK (Nitrile) SKV (Viton) Coil part number C-*-*/7 Coil voltage available, VDC.,, VC* Viton is a registered trademark of E.I. DuPont *C coils must be used with a rectifying connector Pressure Drop Pressure - psi Flow - L/min Flow - US gpm Pressure - bar Pressure - psi Flow - L/min Flow - US gpm Pressure - bar -. ETON Screw-In Cartridge Valves E-VLSC-MC-E December 9 n Eaton Brand

19 S7 - Directional Control Valve Bi-directional, normally closed poppet solenoid valve Up to L/min (.6 USgpm) Up to bar ( psi) Model Code S7 N * H W 5 6 Function S7 - Normally closed Seal Material N - Nitrile V - Viton Manual Override - Screw - Push (Consult factory for availability) See page -98. Voltage - VDC - VDC - VC - VC 5 Coil Termination H - ISO DIN 65 F - Flying lead DM - Deutsch moulded Other terminations available on request. 6 Port Sizes Code Port Size Housing Number luminium Steel W /" BSP 85 W /8" BSP 75 6T /8" SE Dimensions mm (inch) Cartridge Only Basic Code S7.5 (.9) 8. (.89) 6. (.) Installation Drawing 5. (.97) holes Ø6.8 (.7) thro 59. (.) 7. (.7). /F / -6- UNF- 8.5 (.5) 8.5 (.) 6. (.6) 9. (.75) 6. (.) 6. (.). (.87).8 (.5) 5.9 (.6) 5.8 (.).8 (.5) Ø.6 (.5) n Eaton Brand ETON Screw-In Cartridge Valves E-VLSC-MC-E December 9 -.

20 SBV-8-C - Solenoid Bi-directional Valve Bi-directional, normally closed solenoid valve 6 L/min (5 USgpm) bar ( psi) Sectional View Operation In the de-energized position the valve is blocked in both directions. Performance Data Ratings and Specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) bar ( psi) Cartridge fatigue pressure (infinite life) bar ( psi) Rated flow 6 L/min (5 USgpm) Internal leakage, port to port & port to port 5 drops/min, bar ( psi) Temperature range - to C (- to F) Coil duty Continuous from 85% to % of nominal voltage Cavity C-8- Fluids ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) luminum or steel Weight cartridge only, kg (.6 lbs) Seal kit (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont When the solenoid is energized the pilot poppet is released from the seat allowing the main poppet to open. series of internal check valves allows full flow in both directions. Features Hardened and ground working parts. Lapped seat for low leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low pressure drop. Description This is a -way -position, bi-directional, pilot operated, normally closed poppet type screw in cartridge valve. The valve is ideal for isolating and holding actuators in position. Pressure Drop Cartridge only Flow - L/min (,8 cst 9 C) Pressure Drop - psi B 6 8 Pressure Drop - bar Flow - USgpm (5 SUS F) - Port to port B - Port to port -6. ETON Screw-In Cartridge Valves E-VLSC-MC-E December 9 n Eaton Brand

21 SBV-8-C - Solenoid Bi-directional Valve Bi-directional, normally closed solenoid valve 6 L/min (5 USgpm) bar ( psi) Model Code SBV 8 (V) C * * ** **** * S Function SBV - Solenoid valve Size 8-8 size Seal Material Blank - Buna-N V - Viton Style C - Normally closed 5 Manual Override Option Blank - No manual override M - Manual override For valve dimensions with manual override option installed see page Valve Housing Material Blank - Cartridge only - luminum S - Steel 7 Port Size Code Port Size Housing Number Cartridge only 8 Voltage Rating - No coil D - VDC D - VDC 6D - 6VDC luminium Steel G /" BSPP G /8" BSPP T SE T SE T SE See section J for housing details. - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 9 Connector Types G - ISO DIN 65 Q - Spade terminals W - Flying lead N - Deutsch Y - mp JR D - Metripack 5 male J - Metripack 8 male Coil Series S - 8 series, W For coil part numbers and dimensions see section C. Special Features - None (Only required if valve has special features omitted if. ) Dimensions mm (inch) Cartridge Only 6, (.) Torque cartridge in aluminum or steel housing - Nm (5- ft lbs) Installation Drawing (luminum) Note: When solenoid valve is ordered as cartridge only, coil nut is included. Ø,7 (.5) 58. (.) 58, (.) 9, (.75) hex 5.8 (.) 8. (.5) 5.5 (.6) X 7. (.8) 9. (.75) 7,7 (.9) Ø,6 (.5).75-6 Thd.. (.). (.7) 5.8 (.) WRNING Maintain 5-8 Nm (-6 ft lbs) maximum WRNING luminum housings can be used for torque on valve tube nut. pressures up to bar ( Over tightening may cause psi). Steel housings must be valve failure. used for operating pressures above bar ( psi). n Eaton Brand ETON Screw-In Cartridge Valves E-VLSC-MC-E December 9-7.

22 SBV-8-C - Solenoid Bi-directional Valve Bi-directional, normally closed solenoid valve 6 L/min (5 USgpm) 5 bar (5 psi) Sectional View Operation In the de-energized position the valve is blocked in both directions. When the solenoid is energized the pilot poppet is released from the seat allowing the main poppet to open. Performance Data Ratings and Specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) 5 bar (5 psi) Cartridge fatigue pressure (infinite life) bar (5 psi) Rated flow 6 L/min (5 USgpm) Internal leakage, port to port & port to port 5 drops/min, 5 bar (5 psi) Temperature range - to C (- to F) Coil duty Continuous from 85% to % of nominal voltage Cavity C-8- Fluids ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) luminum or steel Weight cartridge only, kg (.6 lbs) Seal kit (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont series of internal check valves allows full flow in both directions. Features Hardened and ground working parts. Lapped seat for low leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low pressure drop. 5 bar working pressure. Description This is a -way -position, high pressure bi-directional, pilot operated, normally closed poppet type screw in cartridge valve. The valve is ideal for isolating and holding actuators in position. Pressure Drop Cartridge only Pressure Drop - psi Flow - L/min (,8 cst 9 C) B 6 8 Pressure Drop - bar Flow - USgpm (5 SUS F) - Port to port B - Port to port -. ETON Screw-In Cartridge Valves E-VLSC-MC-E December 9 n Eaton Brand

23 SBV-8-C - Solenoid Bi-directional Valve Bi-directional, normally closed solenoid valve 6 L/min (5 USgpm) 5 bar (5 psi) Model Code SBV 8 (V) C (*) (*) ** **** * P Function SBV - Solenoid valve Size 8-8 size Seal Material Blank - Buna-N V - Viton Style C - Normally closed 5 Manual Override Option Blank - No manual override M - Manual override For valve dimensions with manual override option installed see page Valve Housing Material Blank - Cartridge only - luminum S - Steel 7 Port Size Code Port Size Housing Number Cartridge only 8 Voltage Rating - No coil D - VDC D - VDC 6D - 6VDC luminium Steel G /" BSPP G /8" BSPP T SE T SE T SE See section J for housing details. - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 9 Connector Types G - ISO DIN 65 Q - Spade terminals W - Flying lead N - Deutsch Y - mp JR D - Metripack 5 male J - Metripack 8 male Coil Series P - 8 series, W For coil part numbers and dimensions see section C. Special Features - None (Only required if valve has special features omitted if. ) Dimensions mm (inch) Cartridge Only 6, (.) Torque cartridge in aluminum or steel housing - Nm (5- ft lbs) Installation Drawing (Steel) Note: When solenoid valve is ordered as cartridge only, coil nut is included. Ø,7 (.5) 58. (.) 58, (.) 9, (.75) hex 5.8 (.) 8. (.5) 5.5 (.6) X 7. (.8) 9. (.75). (.). (.7) 5.8 (.) 7,7 (.9) Ø,6 (.5).75-6 Thd. WRNING Maintain 5-8 Nm (-6 ft lbs) maximum WRNING luminum housings can be used for torque on valve tube nut. pressures up to bar ( Over tightening may cause psi). Steel housings must be valve failure. used for operating pressures above bar ( psi). n Eaton Brand ETON Screw-In Cartridge Valves E-VLSC-MC-E December 9 -.

24 SV--C/CM/CR - Solenoid Valve Poppet type, normally closed solenoid valve 5 L/min ( USgpm) bar ( psi) Operation In the de-energized position the valve blocks flow from port to and free flow is allowed from port to. When the solenoid is energized the pilot poppet is pulled off the seat allowing the valve to open from port to. in the reverse direction the flow is restricted by the pilot orifice. Features Hardened and ground working parts. Lapped seat for low leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low pressure drop. Sectional View Performance Data Ratings and Specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) bar ( psi) Cartridge fatigue pressure (infinite life) bar ( psi) Rated flow 5 L/min ( USgpm) Internal leakage Less than 5 drops/min. bar ( psi) Coil duty Continuous from 85% to % of nominal voltage Response times (% rated voltage and flow) Energize: 8 ms, de-energize: 6 ms Temperature range - to C (- to 8 F) Cavity C-- Fluids ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) luminum Weight including coil, kg (.87 lbs) Seal kit 5658 (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way, -position, poppet type, pilot operated, normally closed solenoid valve. This valve is used in applications requiring low leakage, such as load holding applications or as a general purpose diverter or dump valve. Pressure Drop Cartridge only Pressure Drop - psi Flow - L/min (,8 cst 9 C) Flow - USgpm (5 SUS F) B 5 Pressure Drop - bar Pressure Drop vs. Flow - Port to port de-energized B - Port to port energized -6. ETON Screw-In Cartridge Valves E-VLSC-MC-E December 9 n Eaton Brand

25 SV--C/CM/CR - Solenoid Valve Poppet type, normally closed solenoid valve 5 L/min ( USgpm) bar ( psi) Model Code SV (V) C (*) (F) ** **** * Function SV - Solenoid valve Size - size Seal Material Blank - Buna-N V - Viton Style C - Normally closed 5 Manual Override Option Blank - No manual override M - Knob type R - Cable type For valve dimensions with manual override option installed see page Filter Option Blank - None F - Filter screen 7 Port Size 9 Connector Types Code Port Size Housing Number Cartridge only G - ISO DIN 65 Q - Spade terminals B /8" BSPP -756* W - Flying lead 6T SE * N - Deutsch Y - mp JR G /" BSPP 8767 D - Metripack 5 male G /8" BSPP H SE J - Metripack 8 male 8H SE For coil part numbers and dimensions *Light duty housing. see section C. See section J for housing details. 8 Voltage Rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. Special Features - None (Only required if valve has special features, omitted if.) Note: Use J series, W coils with this solenoid valve. Dimensions mm (inch) 9,6 (.6) Torque cartridge in aluminum housing 7-5 Nm (5- ft lbs) Note: When solenoid valve is ordered as cartridge only, coil nut is included. Cartridge Only Ø 8,9 (.5) 9, (.75) h ex 57, (.5) 5, (.) h ex,7 (.5) Thd. WRNING Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Ø 5,8 (.6) n Eaton Brand ETON Screw-In Cartridge Valves E-VLSC-MC-E December 9-7.

26 SV--C/CM - Solenoid Valve Poppet type, normally closed solenoid valve 5 L/min ( USgpm) 5 bar (5 psi) Operation Features In the de-energized position the valve blocks flow from port to and free flow is allowed from port to. When the solenoid is energized the pilot poppet is pulled off the seat allowing the valve to open from port to. in the reverse direction the flow is restricted by the pilot orifice. Hardened and ground working parts. Lapped seat for low leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low pressure drop. 5 bar working pressure. Sectional View Performance Data Ratings and Specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) 5 bar (5 psi) Cartridge fatigue pressure (infinite life) bar (5 psi) Rated flow 5 L/min ( USgpm) Internal leakage, port to port 5 drops/min, 5 bar (5 psi) Temperature range - to C (- to F) Coil duty Continuous from 85% to % of nominal voltage Cavity C-- Fluids ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) Steel Weight cartridge only,8 kg (.9 lbs) Seal kit 5658 (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way, -position, poppet type, high pressure, pilot operated, normally closed solenoid valve. This valve is used in applications requiring low leakage, such as load holding applications or as a general purpose diverter or dump valve. Pressure Drop Cartridge only Pressure Drop - psi Flow - L/min (,8 cst 9 C) Port to Port to Flow - USgpm (95 SSU F) Pressure Drop - bar - Port to port de-energized B - Port to port energized -5. ETON Screw-In Cartridge Valves E-VLSC-MC-E December 9 n Eaton Brand

27 SV--C/CM - Solenoid Valve Poppet type, normally closed solenoid valve 5 L/min ( USgpm) 5 bar (5 psi) Model Code SV (V) C (M) (S) ** **** * H Function SV - Solenoid valve Size - size Seal Material Blank - Buna-N V - Viton Style C - Normally closed 5 Manual Override Option Blank - No manual override M - Manual override For valve dimensions with manual override option installed see page Valve Housing Material Blank - Cartridge only S - Steel 7 Port Size Code Port Size Housing Number Cartridge only G /" BSPP -75 G /8" BSPP -75 6T SE T SE 8-75 See section J for housing details. 8 Voltage Rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 9 Connector Types G - ISO DIN 65 Q - Spade terminals W - Flying lead N - Deutsch Y - mp JR D - Metripack 5 male J - Metripack 8 male Coil Series H - series, 9 W For coil part numbers and dimensions see section C. Special Features - None (Only required if valve has special features omitted if "".) Dimensions mm (inch) Cartridge Only Torque cartridge in steel housing Nm (5-55 ft. lbs) 9,6 (.6) Note: When solenoid valve is ordered as cartridge only, coil nut is included. Installation Drawings (Steel) Ø 8,9 (.5), (.875) hex 57. (.5) 57,8 (.8),7 (.5) 5, (.) hex Ø 5,8 (.6).875" Thd (.) (.5) 9.5 (.7) 6.5 (.5) xø7.±. (.8±.5).5±.5 (.75±.) 9. (.75). (.87).5±. (.75±.5) WRNING Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. n Eaton Brand ETON Screw-In Cartridge Valves E-VLSC-MC-E December 9-5.

28 SV--C/CM - Solenoid Valve -way, -position, normally closed, poppet type solenoid valve L/min (6 USgpm) 5 bar (5 psi) Operation In the de-energized position the valve blocks flow from port to and free flow is allowed from port to. When the solenoid is energized the pilot poppet is pulled off the seat allowing the valve to open from port to. in the reverse direction the flow is restricted by the pilot orifice. Features Hardened and ground working parts. Lapped seat for low leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low pressure drop. 5 bar working pressure. Sectional View Performance Data Ratings and Specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) 5 bar (5 psi) Cartridge fatigue pressure (infinite life) bar (5 psi) Rated flow L/min (6 USgpm) Internal leakage 5 drops/min, 5 bar (5 psi) Temperature range - to C (- to F) Coil duty Continuous from 85% to % of nominal voltage Cavity C-- Fluids ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) Steel Weight cartridge only,8 kg (.9 lbs) Seal kit 5658 (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way, -position, poppet type, high pressure, pilot operated, normally closed solenoid valve. This valve is used in applications requiring low leakage, such as load holding applications or as a general purpose diverter or dump valve. Pressure Drop Cartridge only Flow - L/min (,8 cst 9 C) 8 5 Pressure Drop - psi B 5 Pressure Drop - bar 6 Flow - USgpm (5 SUS F) - Port to port de-energized B - Port to port energized -6. ETON Screw-In Cartridge Valves E-VLSC-MC-E December 9 n Eaton Brand

29 SV--C/CM - Solenoid Valve -way, -position, normally closed, poppet type solenoid valve L/min (6 USgpm) 5 bar (5 psi) Model Code SV (V) C (M) (S) ** **** * H Function SBV - Solenoid bi-directional valve Size - size Seal Material Blank - Buna-N V - Viton Style C - Normally closed 5 Manual Override Option Blank - Cartridge only - luminum S - Steel For valve dimensions with manual override option installed see page Valve Housing Materials Blank - Cartridge only S - Steel 7 Port Size Code Port Size Housing Number Cartridge only G /" BSPP -75 G /8 BSPP -75 6T SE T SE 8-75 See section J for housing details. 8 Voltage Rating - No coil D - VDC D - VDC 6D - 6VDCl - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 9 Connector Types G - ISO DIN 65 Q - Spade terminals W - Flying lead N - Deutsch Y - mp JR D - Metripack 5 male J - Metripack 8 male Coil Series H - series, 9 W For coil part numbers and dimensions see section C. Special Features - None (Only required if valve has special features, omitted if. ) Dimensions mm (inch) 9,6 (.6) Torque cartridge in steel housing Nm (5-55 ft lbs) Note: When solenoid valve is ordered as cartridge only, coil nut is included. Cartridge Only Installation Drawing Ø 8,9 (.5), (.875) hex 57. (.5) 57,8 (.8) 6.5 (.5) 5.8 (.) 9. (.75). (.87),7 (.5) 5, (.) hex Ø 5,8 (.6).875" Thd. 9.5 (.7).6 (.75) 6.5 (.5) X 7. (.8) WRNING Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. n Eaton Brand ETON Screw-In Cartridge Valves E-VLSC-MC-E December 9-6.

30 SV--C/CM/CR - Solenoid Valve -way, -position, normally closed, poppet type solenoid valve 5 L/min ( USgpm) bar ( psi) Operation Features In the de-energized position the valve blocks flow from port to and free flow is allowed from port to. When the solenoid is energized the pilot poppet is pulled off the seat allowing the valve to open in both directions. Hardened and ground working parts. Lapped seat for low leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low pressure drop. Sectional View Performance Data Ratings and Specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) bar ( psi) Cartridge fatigue pressure (infinite life) bar ( psi) Rated flow 5 L/min ( USgpm) Internal leakage less than 5 drops/min, bar ( psi) Temperature range - to C (- to 8 F) Coil duty Continuous from 85% to % of nominal voltage Cavity C-- Fluids ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) luminum Weight cartridge only, kg (.87 lbs) Seal kit 5658 (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way, -position, poppet type, pilot operated, normally closed solenoid valve. This valve is used in applications requiring low leakage, such as load holding applications or as a general purpose diverter or dump valve. Pressure Drop Curves Cartridge only Flow - L/min (,8 cst 9 C) Pressure Drop - psi B Flow - USgpm (5 SUS F) Pressure Drop - bar - Port to port de-energized B - Port to port energized -7. ETON Screw-In Cartridge Valves E-VLSC-MC-E December 9 n Eaton Brand

31 SV--C/CM/CR - Solenoid Valve -way, -position, normally closed, poppet type solenoid valve 5 L/min ( USgpm) bar ( psi) Model Code SV (V) C (*) (F) ** **** * Function SV - Solenoid valve Size - size Seal Material Blank - Buna-N V - Viton Style C - Normally closed 7 Port Size Code Port Size Housing Number Cartridge only B /8" BSPP -756* G /" BSPP 8767 G /8" BSPP T SE * 6H SE H SE See section J for housing details. *Light duty housing 9 Connector Types G - ISO DIN 65 Q - Spade terminals W - Flying lead N - Deutsch Y - mp JR D - Metripack 5 male J - Metripack 8 male For coil part numbers and dimensions see section C. 5 Manual Override Option Blank - No manual override M - Knob type R - Cable type For valve dimensions with manual override option installed see page Voltage Rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. Special Features - None (Only required if valve has special features, omitted if. ) 6 Filter Options Blank - None F - Filter screen Dimensions mm (inch) 9,6 (.6) Torque cartridge in aluminum housing 7-5 Nm (5- ft lbs) Note: When solenoid valve is ordered as cartridge only, coil nut is included. Cartridge Only Installation Drawing Note: Use J series, W coils with this solenoid valve. Ø 8,9 (.5) 9, (.75) hex 57. (.5) 57, (.5).5 (.75) 9. (.75) 5. (.) 6.5 (.5),7 (.5) 5, (. ) hex.875" Thd. Ø 5,8 (.6) 9.5 (.7).6 (.75) 6.5 (.5) X 7. (.8) WRNING Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. n Eaton Brand ETON Screw-In Cartridge Valves E-VLSC-MC-E December 9-7.

32 SV--C/CM - Solenoid Valve Poppet type, normally closed solenoid valve, (free reverse flow) 5 L/min ( USgpm) 5 bar (5 psi) Sectional View Operation In the de-energized position the valve blocks flow from port to and free flow is allowed from port to. Performance Data Ratings and Specifications When the solenoid is energized the pilot poppet is pulled off the seat allowing the valve to open in both directions. Features Hardened and ground working parts. Lapped seat for low leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low pressure drop. 5 bar working pressure. Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) 5 bar (5 psi) Cartridge fatigue pressure (infinite life) bar (5 psi) Rated flow 5 L/min ( USgpm) Internal leakage, port to port 5 drops/min, 5 bar (5 psi) Temperature range - to C (- to F) Coil duty Continuous from 85% to % of nominal voltage Cavity C-- Fluids ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc Filtration Cleanliness code 8/6/ Housing material (standard) Steel Weight cartridge only,8 kg (.9 lbs) Seal kit 5658 (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way, -position, poppet type, high pressure, pilot operated, normally closed solenoid valve. This valve is used in applications requiring low leakage, such as load holding applications or as a general purpose diverter or dump valve. Pressure Drop Cartridge only Pressure Drop - psi Flow - L/min (,8 cst 9 C) B Pressure Drop - bar Flow - USgpm (5 SUS F) - Port to port B - Port to port energized -7. ETON Screw-In Cartridge Valves E-VLSC-MC-E December 9 n Eaton Brand