Hydraulic Screw-in Cartridge Valves (SiCV) Proportional valves Proportional solenoid valves for pressure and flow control

Size: px
Start display at page:

Download "Hydraulic Screw-in Cartridge Valves (SiCV) Proportional valves Proportional solenoid valves for pressure and flow control"

Transcription

1 Hydraulic Screw-in Cartridge Valves (SiCV) Proportional valves Proportional solenoid valves for pressure and flow control

2

3 Proportional valves PROPORTIONAL VALVES... - PFRH EPV...- EPV6...- EPV6A...-7 EPV ESV-8-C... - ESV--C... - ESV--C... - ESV-8-O ESV--O ESV--O... - EFV--C... - EFV--C EFV--O... - EFV--O... - ESV9-8-E ESV9-8-F ESV ESV ESVL9--E ESVL9--F ESVL PFRA EFV--C EFV--O PDRA IRV IRV ERV ERV PPDA EPRV EPPV EPPV EPRV EPRV EPRV Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 -

4 Proportional valves Valve locator/section contents Note: Proportional valve solenoid coils and electronic valve drivers are covered in section C of this Catalog. Functional symbol (In) Model Cavity Flow rating Typical pressure Proportional bi-directional, NC, poppet L/min (USgpm) bar (psi) PFRH A879 8 (5) () -8 Page (Out) Model Cavity Flow rating Typical pressure Proportional bi-directional, NC, poppet L/min (USgpm) bar (psi) EPV C-- - (-8) 5 (5) - Page EPV6A EPV6 Model Cavity Flow rating Typical pressure Proportional flow control, NC, poppet L/min (USgpm) bar (psi) EPV6A C-6-SU (undercut) -6 8 () -7 EPV6 C-6-SU (undercut) -6 8 () -8 Page Model Cavity Flow rating Typical pressure Proportional flow control, NC, poppet L/min (USgpm) bar (psi) ESV-8-C C-8- (9) () - ESV--C C-- 7 (9) () - ESV--C C-- (7) () - Model Cavity Flow rating Typical pressure Proportional flow control, NO, poppet L/min (USgpm) bar (psi) ESV-8-O C-8- (9) () -6 ESV--O C-- 7 (9) () -8 ESV--O C-- (7) () - Page Page Model Cavity Flow rating Typical pressure Proportional flow control, NC, spool L/min (USgpm) bar (psi) EFV--C C-- 8 () () - EFV--C C-- 77 () () -6 Model Cavity Flow rating Typical pressure Proportional flow control, NO, spool L/min (USgpm) bar (psi) EFV--O C-- () () - EFV--O C-- (8) () - Page Page Model Cavity Flow rating Typical pressure Page COIL A Proportional flow control, NO, spool L/min (USgpm) bar (psi) ESV9-8-E C-8-. (.9) (,) -8 ESV9-8-F C-8-. (.9) (,) -9 ESV9- C--5S. (5.8) 5 (,6) -5 - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

5 Proportional valves Valve locator/section contents Functional symbol E F Model Cavity Flow rating Proportional flow Control, NC, spool L/min (USgpm) Typical pressure bar (psi) ESVL9--E C--5S (6) 5 (6) -5 ESVL9--F C--5S (6) 5 (6) -5 Page Model Cavity Flow rating Typical pressure Proportional bi-directional, NC, poppet L/min (USgpm) bar (psi) PFRA A67 8 (5) () -57 Page Model Cavity Flow rating Typical pressure Page Proportional flow control, NC, spool L/min (USgpm) bar (psi) EFV--C C-- < () () -59 Model Cavity Flow rating Typical pressure Page Proportional flow control, NO, spool L/min (USgpm) bar (psi) EFV--O C-- < (<) () -6 Model Cavity Flow rating Typical pressure Page Proportional relief, NO, POPPET L/min (USgpm) bar (psi) PDRA A879.5 (.) 5 (5) -67 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

6 Proportional valves Valve locator/section contents Functional symbol Model Cavity Flow rating Typical pressure Proportional inverse relief, poppet L/min (USgpm) bar (psi) IRV- C-- (.5) () -69 IRV- C-- 57 (5) (5) -7 Page Model Cavity Flow rating Typical pressure Page Proportional relief, spool L/min (USgpm) bar (psi) ERV- C-- <6 (5) () -7 ERV-6 C-6- < (<9) () -75 EPPV5 TC65 8 (.) 5 (75) -8 EPPV6 TC6 8 (.) 5 (75) -8 Model Cavity Flow rating Typical pressure Page Proportional reducing/relief, spool L/min (USgpm) bar (psi) PPDA A879 (5) () -77 EPRV-8 C () 5 (5) -79 Model Cavity Flow rating Typical pressure Proportional reducing/relief, spool L/min (USgpm) bar (psi) EPRV- C-- 8 () 5 (5) -85 EPRV- C-- (8) () -87 EPRV-6 C () 5 (5) -89 Page -6 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

7 Proportional valves Section overview This section gives basic specifications for the complete line of Vicker s screw-in proportional control valves. Its purpose is to provide a quick, convenient reference tool when choosing proportional valves or when designing a system using these components. The EPV has several outstanding performance features which give it a unique position in the screwin cartridge valve market. Valve gain linearity, flow force pressure compensation characteristics above bar ( psi) and low internal leakage. The EPV6 is a proportionally controlled two-way poppet type valve. The main poppet amplifies a small flow through the pilot circuit and is comparable to a transistor. As the transistor uses small currents to control larger currents, the hydraulic valve transistor or VALVISTOR uses the pilot flow to control the main stage flow with servolike response flow to control. The ESV is a proportional two-way, pressure compensated, poppet type flow control valve. The valve is available in 8,, and sizes, both normally open or normally closed in the de-energized position. The EFV is a proportionally controlled two-way, spool type flow control valve. Technically the valve is not pressure compensated, but it is partial flow force pressure compensated. The EFV is a three port, pressure compensated, proportional flow control valve. The valve can be used as a priority flow regulator, with regulated flow being supplied to port and excess flow being by-passed to port. If port is blocked the valve functions as a restrictive, way, pressure compensated flow regulator. The ERV- is an electric, proportionally controlled, internally pilot operated, spool type screw-in relief valve. It is capable of handling flows from,8-6, L/min (-5 USgpm) at pressures from 5- bar (5- psi). Also available is an ERV-6 which is capable of handling flows from 7,6- L/min. (-5 USgpm) at pressures from 5- bar (-5 psi). The ERV- is a low flow electric proportionally controlled relief valve similar to the ERV-. This valve is rated for flows from,-,8 L/min ( USgpm) and pressures up to 5 bar (5 psi). The EPRV-8 is an electric, proportionally controlled, direct acting spool type, screw-in pressure reducing/ relieving valve. It is capable of handling flows from -7,6 L/min (- USgpm) at set pressures from - bar (- psi). The EPRV- is an electric, proportionally controlled, internally pilot operated, spool type, screw-in pressure reducing/relieving valve. It is capable of handling flows from -7,6 L/min (- USgpm) at set pressures from -5 bar (-5 psi). Also available is an ERV-6 which is capable of handling flows from -8 L/min (- USgpm) at set pressures from -5 bar (-5 psi). The EPRV- is an electric, proportionally controlled, internally pilot operated, spool type, screw-in pressure reducing/relieving valve. It is capable of handling flows from - L/min (-8 USgpm) at set pressures from 5-7 bar (5- psi). Vickers proportional pressure and flow control valves are designed to be easily controlled by the simplest of DC electrical devices such as a volt battery and a potentiometer. Varying the voltage at the coil is one of the simplest means of control available. Any of the Vickers DC coils will work on most of these valves simply by varying the voltage between and 75% of the rated coil voltage. It should be noted that as the operating temperature of a coil increases, the solenoid force decreases. Therefore if the voltage is held constant as the coil heats up then valve pressure (or flow) will change. The IRV is a proportionally controlled poppet type, relief valve, with an inverse function. This valve is capable of handling flows up to L/min (.5 USgpm) and pressures up to bar ( psi). IRV- is an inverse proportionally controlled spool type two stage relief valve. Ideal for use to control fan drive or brush pressure, where full speed or force is required under electrical failure. Valve is capable to handle flow up to 57 lpm (5 USgpm) and pressure up to bar (5 psi). Electrical current controls with PWM are recommended for all Eaton proportional valves. Closed-loop electrical control with feedback from the parameter to be monitored will provide the most accurate control. Valve features and benefits Products in this catalog have been fatigue tested to one million cycles at % or million cycles at 5% of rated pressure All operating parts are hardened steel, ground and honed for long life and low leakage Designed for maximum flexibility and minimal space requirements All exposed cartridge surfaces are zinc dichromate plated to resist corrosion Reliable, economical and compact Rated flows up to 6 L/min ( USgpm) Optional nose-in, side-out or side-in, nose out flow direction (EPV6 series) Coil features and benefits The valves in this catalog are offered with a choice of two or three standard voltages and several types of electrical connections. For other coil ratings and connections, consult your Eaton applications engineer. Variety of voltages and terminations Coils are interchangeable for serviceability on the EPV and EPV6. Coils are interchangeable for serviceability on the ERV-, EPV-6, EPRV- and EPRV-6 Compact, one-piece weather-proof encapsulated design. Eliminates need for extra seals An arc suppression diode molded into the coil is available as a standard option on ERV, EPRV and EFV valves Fluid cleanliness Proper fluid condition is essential for long and satisfactory life of hydraulic components and systems. Hydraulic fluid must have the correct balance of cleanliness, materials, and additives for protection against wear of components, elevated viscosity, and inclusion of air. Warning Application of these products beyond published performance specifications may cause valve malfunction which may result in personal injury and/or damage to the machine. Warning For pressures over bar ( psi) use steel housing. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

8 PFRH - Proportional valve Proportional bi-directional poppet, flow control valve Up to 8L/min (5 USgmp) bar ( psi) (In) (Out) Sectional view Description This is a proportionally operated way poppet valve. Ideal for use in lowering circuits to give good control to the operator. The valve will compensate as the pressure difference increases to prevent speed increase due to increasing load. Operation In the de-energised position the valve is blocked in both directions. As the current to the coil is increased the valve opens proportionally. There is also an element of compensation as the pressure difference across the valve increases. See performance graphs. Performance data Features High flow capacity with reduced space requirements. Standard valve bodies and common cavities. One-piece encapsulated coil with minimal amperage draw. Oil immersed armature solenoid. Various coil terminals and voltages. Coil interchangeability with valves of same series. Manual override, seal variations and other options available. Sealed coil arrangement to protect stem from corrosion. Reversible coil without affecting performance. Ratings and specifications Performance data is typical with fluid at cst (5 SSU) Max inlet pressure bar ( psi) Max regulated flow at rated 5 bar L/min (5. 5 L/min (.9 L/min (.9 Frequency to Hz - recommended Dead band 8-6% of rated current Response time 8ms Internal leakage Up to.67 ml/min (dpi) bar differential at centistrokes Temperature range (oil) - to C (- to 8 F) Cavity A67 (see Section M) Electrical data See coil data sheet Torque cartridge into cavity Nm ( lbs ft) Mounting position Unrestricted Fluids Most general purpose hydraulics fluids Seal material Standard nitrile with PTFE back up rings Filtration S55/ Class 6/ (5 micron or better) Nominal viscosity range 5 to 5 cst Standard housing materials Aluminium Coil model code C6-*-*/9 Voltage available, VDC Coil weight. kg (.6 lbs) Weight. kg (. lbs) Seal kit SK8 (Nitrile) SK8V (Viton ) Viton is a registered trademark of E.I. DuPont Pressure drop Viscosity = cst (5 SSU) % Pressure - psi Flow - L/min Flow - US gpm 7 Pressure - bar Flow - US gpm Performance curves % related amps 5 bar bar Flow - L/min Flow - US gpm Pressure differential - bar % of rated amps 6% of rated amps % of rated amps Pressure differential - psi Flow - L/min -8 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

9 PFRH - Proportional valve Proportional bi-directional poppet, flow control valve Up to 8L/min (5 USgmp) bar ( psi) Model code PFRH N 6 H W 5 6 Function PFRH - Normally closed Seal material N - Nitrile V - Viton Coil termination H - DIN65 F - Flying Lead DM - Deutsch moulded Other terminations available on request. 6 Port size Code Port size Housing number lank Cartridge only W /" SP A59 W /8" SP A75 6T /8" SAE A955 Manual override 6 - Screw 5 Voltage - VDC - VDC Dimensions mm (inch) Cartridge only Installation drawing. (.87) 8. (.89) 5.5 (.) 5. (.97) M/O plate fitted by customer holes Ø6.8 (.7) thro.8 (.5) 98. (.86) 5. (.97). (.87) 5.8 (.) 6. (.6) 9. (.75) 6. (.) 6. (.) 5.9 (.6).8 (.5) 6.5 (.) A/F 8.9 (.7) / -6-UNF-A Ø5.8 (.6) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

10 EPV - Proportional valve Proportional uni-directional poppet, flow control valve Up to L/min (8 USgmp) 5 bar (5 psi) Operation In the de-energized condition, blocked from port to with no reverse flow permitted. When energized, flow is allowed from port to port in direct proportion to the current applied to the solenoid coil. Features Hardened, ground and honed working parts to limit leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low pressure drop. Sectional view Performance data Ratings and specifications Description This is a uni-directional proportionally controlled, normally closed poppet valve. It is ideal for lowering circuits controlling the speed of movement with low leakage when closed. Performance data is typical with fluid at,8 cst (5 SSU) and 9 C ( F) Typical application pressure (at port ) 5 bar (5 psi) Cartridge fatigue pressure (infinite life) 5 bar (5 psi) Rated flow - L/min ( - 8 USgpm) Operating ambient temperature - to 9 C (- to 9 F) Cavity C-- Fluids Anti-wear hydraulic oils with una-n seals (standard) Phosphate esters (non-alkyl) with Viton seals are available by request Viton is a registered trademark of E.I. DuPont Weight cartridge only,78 kg (.7 lbs) Filtration 7 - bar ( - psi) Cleanliness code 7/5/ + bar (+ psi) Cleanliness code 5// Standard housing materials Aluminum or Steel Typical hysteresis Less than % of rated current at bar pressure drop Pulse Width Modulated (PWM) Internal leakage cm bar ( psi) and oil viscosity of cst Oil viscosity range - 8 cst Nominal supply voltage or VDC Threshold current Adj from - 6 ma ( VDC) Adj from 5 - ma ( VDC) Coil max flow.7 amps VDC. amps VDC Recommended PWM frequency - Hz application dependent, 5 Hz typ Coil C (86 F) V-6.5Ω V-5.Ω Power rated current and C coil temperature Cartridge seal kit V-.8 watts V-.8 watts -758 (una-n) - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

11 EPV - Proportional valve Proportional uni-directional poppet, flow control valve Up to L/min (8 USgmp) 5 bar (5 psi) Model code EPV * ** ** *** * * (S**) Function EPV - Electro-proportional flow control valve, poppet type Size - Size Valve housing material Omit for cartridge only A - Aluminum S - Steel Maximum operating pressure for aluminum housing is bar ( psi) 5 Seal material N - una-n V - Viton (standard) NF - una-n and 6 mesh filter screen VF - Viton and 6 mesh filter screen Port size 5 Code Port size Housing number 8 Coil/Connector types Aluminium Steel Cartridge only G /8" SPP H SAE H SAE See section J for housing details. Connector No connector VDC VDC W Leadwire (DC only) Q Spade terminals (DC only) U DIN Y Metri-Pack 5 male* F Weather-Pack male N Deutsch DT-P *Preferred Packard connector. 6 Voltage rating D - VDC D - VDC D - No coil 7 Manual override option - No manual override M - Pin type S - Screw type (mm Hex) Manual override is available in two different configurations, either push pin type is used when system pressure does not exceed bar ( psi). The screw type can be used at any system pressure. 9 Design number - Design no. Special features lank - None Dimensions mm (inch) Cartridge only Ø 6,7 (.5) Manual override Ø,5 (.7) Ø 5,8 (.) Valve is shown with U coil. See Section C for coil information. Torque cartridge in housing A Nm (5- ft. lbs) S Nm (5-55 ft. lbs) 8,5 (.7), (5.7),9 (.65) Warning The cavity should be machined to the,9 (.56) maximum diameter and 6, (.7) maximum depth. See section M. Warning When using the Screw Type override, care must be taken to return the override back to its neutral position before activating the valve. Failure to take this precaution may result in personal injury or damage to the machine. Opening clearance, (.8), (.).875"- Thd. Ø 5,8 (.6) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 -

12 EPV - Proportional flow control valve Proportional uni-directional poppet, flow control valve Up to L/min (8 USgmp) 5 bar (5 psi) Step response data Flow response in % of max flow 5 On stroke 5 msec Typical current step to provide 5% flow Off stroke Time - sec Flow vs current With bar differential between inlet and outlet A - bar ( psi) pressure drop from Port to Port 8 - bar (5 psi) pressure drop from Port to Port Flow - USgpm 6 A Flow - L/min % Current - ma - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

13 EPV - Proportional flow control valve Proportional uni-directional poppet, flow control valve Up to L/min (8 USgmp) 5 bar (5 psi) Flow vs pressure drop Per % of input current L/min USgpm Flow 8 6 Pressure drop - psi A - % of input current - 85% of input current C - 7% of input current D- 57% of input current E - % of input current Pressure drop - bar Typical flow response For an amplitude of +_ % maximum stroke (center to offset) about the 5% position. A 5 P = bar (5 psi) - 5 Phase lag - degrees -6. Hz Hz Hz Hz A - d - Phase Lag Frequecy Hz Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 -

14 EPV6 - Proportional valve Proportional flow control, normally closed, poppet 6L/min ( USgpm) 8 bar ( psi) EPV6A EPV6 Operation A style (nose in, side out) - In the de-energized position this valve remains closed from port to port. When current is applied to the coil, a ontrolled increasing flow will be allowed from port to port, in proportion to the current applied. style (side in, nose out) - in the de-energized position the valve remains closed from port to port. When current is applied to the coil, a controlled increasing flow will be allowed from port to port. In both examples free reverse flow is allowed in the opposite direction. Features Hardened and ground working parts. 8 bar working pressure, very low hysterisis, long life. Sectional view Description This is a way normally closed, pressure compensated, poppet type, electro proportional screw in cartridge valve with a low hysterisis and fine control. The valve is suitable for demanding applications where long life and accuracy is demanded Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) 8 bar ( psi) Cartridge fatigue pressure (infinite life) 8 bar ( psi) NFPA rated Rated flow to 6 L/min ( USgpm) EPV6A 5 cm /min, bar ( psi) Internal leakage EPV6 cm /min, bar ( psi) Oil viscosity range -8 cst Nominal supply voltage / VDC Threshold current Adj from 5-6 ma ( VDC) Adj from 75-5 ma ( VDC) Coil current for maximum flow.7 VDC. VDC Recommended PWM frequency - Hz application dependent, 5 Hz typ Power consumption V-.8 watts V-.8 watts Coil resistance v-6.5 V/V-5. V Temperature range - to 9 C (- to 9 F) Cavity C-6-S (undercut) Antiwear hydraulic oils with una-n seals (standard) Fluids Phosphate esters (non-alkyl) with Viton 7- bar (- psi) Cleanliness code 7/5/ Filtration + bar (+ psi) Cleanliness code 5// Housing material (standard) Aluminum or steel less than % of rated bar Typical hysterisis pressure drop-pulse width modulated (PWM) Weight cartridge only kg (. lbs) Seal kit -569 (una-n) Viton is a registered trademark of E.I. DuPont - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

15 EPV6 - Proportional valve Proportional flow control, NC, poppet 6L/min ( USgpm) 8 bar ( psi) Model code EPV 6 * ** * *** ** *** * * (S**) Function EPV - Solenoid valve Size 6-6 size Flow direction A - Nose-in, side-out - Side-in, nose-out Rated flow - L/min (.5 USgpm) 6-6 L/min (6 USgpm) - L/min (6 USgpm) 6-6 L/min ( USgpm) 5 Valve housing material Omit for cartridge only A - Aluminum S - Steel Note: Aluminum housings can be used for pressures up to bar ( psi). Steel housing must be used for operating pressures above bar psi) Port size Code Port size Housing number 7 Seal material N - una-n (standard) V - Viton NF - una-n and 6 mesh filter screen VF - Viton and 6 mesh filter screen 8 Voltage rating D - VDC D - VDC D - No Coil Aluminium EPV6-A 9 Manual override option lank - No manual override - No manual override M - Pin type S - Screw type (mm Hex) Manual override is available in two different configurations, either push pin type is used when system pressure does not exceed bar ( psi). The screw type can be used at any system pressure. Note: When using the Screw Type override, care must be taken to return the override back to its neutral position before activating the valve. Failure to take this precaution may result in personal injury or damage to the machine. Steel EPV6-A EPV6- EPV6- Cartridge only G /" SPP G /" SPP H SAE H SAE C CETOP5 (NFPA D5) Interface (Requires steel body) See section J for housing details. Connector type - No connector F - Weatherpack male Q - Spade Terminals (DC only) W - Flying Lead N - Deutsch DT-P Y - Metripack 5 male* U - DIN 65 *Preferred Packard connector. For coil part numbers and dimensions see section C. Design number - Design no. Special features lank - None M - Pin type S - Screw type Warning When using the Screw Type override, care must be taken to return the override back to its neutral position before activating the valve. Failure to take this precaution may result in personal injury or damage to the machine. Caution A separate check valve is required down stream to isolate the EPV valve from load forces when the EPV is used to hold a load. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

16 EPV6 - Proportional valve Proportional flow control, normally closed, poppet 6L/min ( USgpm) 8 bar ( psi) Pressure drop curves Command current V V A- 6 ma ma - 7 ma 5mA C- 8 ma ma D- 9 ma 5mA E- ma 5mA F- ma 55mA G- ma 6mA H- ma 65mA I- ma 7mA Pressure differential A- bar 5 psi - bar psi C- 5 bar 7 psi D- bar 5 psi E- bar psi Pressure L/min ( USgpm) Pressure drop DP On stroke Delay/reach 9% Off stroke delay/reach 9% bar (9 psi) ms/5 ms 5 ms/5 ms bar (5 psi) ms/7 ms 5 ms/7 ms -6 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

17 EPV6A Proportional flow control, normally closed, poppet 6L/min ( USgpm) 8 bar ( psi) Dimensions mm (inch) Valves are shown with U coil. See Section C for coil information. Torque cartridge in aluminum housing 8- Nm (8-9 ft. lbs) Torque cartridge in steel housing 6-9 Nm (- ft. lbs) Cartridge only - EPV6A Nose-in, side out 7, (.7) 9, (5.7) Ø,5 (.7),7 (.9) Note: When stand alone housings are used, the following guidelines apply: EPV6-A: Port is to be plugged. EPV6-: Port is to be connected to port in order to provide the required feedback flow path. 85, (7.9) 67,9 (.67) 8, (7.)." - Thd. Screw type actuator (shown) mm hex socket With manual actuator 8, Hex (.5) Ø 5, (.) No manual actuator Installation drawing (Steel) 9.7 (5.7).5 (.6) 8. (.5). (.9) Port LS SAE -Plugged X Ø8.7 (.).7 (.5) 76. (.).8 (.97) 79. (.).8 (.97). (.9) 8. (.5) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

18 EPV6 Proportional flow control, normally closed, poppet 6L/min ( USgpm) 8 bar ( psi) Dimensions mm (inch) Cartridge only - EPV6 Side-in, nose out For EPV6- (flow to ), Port must be connected to Port externally to the cartridge, either by passages in the cavity block or external plumbing. When purchased with undercut body, this connection is included in the body and Port is not machined. A separate external port connection is not required for EPV6-A (flow to ). 7, (.7) Ø,5 (.7) Required external connection with standard C-6-S cavity. 9, (5.7),7 (.9) 85, (7.9) 67,9 (.67) 8, (7.) Screw type actuator (shown) mm hex socket."- Thd. 7, (.7) 8, Hex (.5) Ø 5, (.) Ø 8,6 (.) With manual actuator No manual actuator Installation drawing (Steel) 9.7 (5.7).5 (.6) 6.5 (.5). (.9) 6. (.75) Port LS SAE -Plugged X Ø8.7 (.).7 (.5) 76. (.).8 (.97) 79. (.).8 (.97). (.9) 8. (.5) -8 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

19 EPV6 - Proportional valve Proportional flow control, normally closed, poppet 6L/min ( USgpm) 8 bar ( psi) EPV6-A-**-S-5C-**-D-(*)-*- CETOP 5 Interface mm (inch) 76, (.9) Required for removal 9,7 (8.65) 99,5 (.9).5- UNC x.5" socket head cap screw (olt Kit 556) M6 x 6 socket head cap screw (olt Kit 6896) 7,6 (.8) 69,5 (.7) 6, (.8) 5, (.) ISO--AC-5--A (NFPA D5) mounting surface,8 (.89) P? A,7 (.6) Tb Ta PA Ta Tb Ø 6,96/6,85? thru holes EPV6--**-S-5C-**-D-(*)-*- CETOP 5 Interface mm (inch) PA Tb Ta 5, (.) 7,6 (.8) 69,5 (.7) 6, (.8).5- UNC x.5" socket head cap screw (olt Kit 556) M6 x 6 socket head cap screw (olt Kit 6896) 76, (.9) Required for removal 9,7 (8.65) 99,5 (.9) ISO--AC-5--A (NFPA D5) mounting surface,8 (.89) P,7 (.6) Note: CETOP 5 Seal Kit Tb? A Ta Ø 6,96/6,85 thru holes Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

20 ESV-8-C - Proportional valve Proportional flow control, normally closed, poppet Up to L/min (8 USgpm) bar ( psi) Operation In the de-energized position, this valve blocks flow from port to port and free flow is allowed from port to port. In the energized position, flow from port to port is restricted while free flow is allowed from port to port. The valve flow is proportional to the current applied to the coil. Features Hardened and ground working parts to give long life and very low leakage. IP69K Tough coil compatibility, continuously rated. Compact design with low pressure drop. Profile view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure bar ( psi) Cartridge endurance rating million cycles Cartridge fatigue pressure rating (NFPA/T.6. R-) bar ( psi) Rated 5 psid, 8. gpm min, 9. gpm nom Leakage (fully closed) 5 drops/min psi Nominal supply voltage / VDC Current to open valve 5-5 ma (V coil), ma (V coil) Temperature range - to 9 C (- to 9 F) Maximum oil temperature C (8 F) Maximum internal oil temperature C (9 F) Cavity C-8- All general purpose hydraulic fluids such as: MIL-H-566, SAE, Fluids SAE, etc. Filtration Cleanliness code 8/6/ Housing material (standard) Aluminum Hysterisis Usgpm with dither Weight cartridge only. kg (. lbs) Seal kit (una-n), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a way position, pilot operated poppet type, normally closed, proportional flow control screw in cartridge valve. Ideal for lowering circuits or in conjunction with pressure compensators to provide proportional flow control to any actuator. Pressure drop curves Flow - USgpm Pressure Drop - bar Pressure Drop - PSID Current - Amps Flow - L/min Flow - USgpm Flow - L/min - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

21 ESV-8-C - Proportional Valve Proportional flow control, normally closed, poppet Up to L/min (8 USgpm) bar ( psi) Model code ESV 8 * C * ** ** * * * ** ** Function ESV - Proportional flow control Size 8-8 size Seal material N - una-n V - Viton Style C - Normally open 5 Housing material lank - Cartridge only A - Aluminum Port size Coil series Code Port size Housing number lank - No coil S - S Series, W Aluminium Cartridge only For coil part numbers and dimensions see section C. G /" SPP -677 G /8" SPP -678 Coil special features T SAE -57 lank - No coil 6T SAE No special feature 8T SAE 8-67 See section J for housing details. 7 Coil voltage - No coil D - VDC D - VDC 8 Type of power lank - No coil D - DC w/o diode - DC w/o diode 9 Connector type lank - No coil G - ISO DIN 65 Q - Spade Terminals W - Flying Lead N - Deutsch (DC only) Y - Amp JR (DC only) P - Conduit For coil part numbers and dimensions see section C. Valve special features lank - None Dimensions mm (inch) Cartridge only Installation drawing 9, HEX (.75) 5.5 (.7) 9. (.75) 5,5 (.7), HEX (.875) 6, (.) 8. (.5) X (.8) (.) 5.5 (.6) 7,8 (.9),75-6 THD.. (.). (.7) 5.8 (.) Ø,6 (.97) Ø,8 (.5) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 -

22 ESV--C - Proportional valve Proportional flow control, normally closed, poppet Up to 7 L/min (8.5 USgpm) bar ( psi) Operation In the de-energized position, this valve blocks flow from port to port and free flow is allowed from port to port. In the energized position, flow from port to port is restricted while free flow is allowed from port to port. The valve flow is proportional to the current applied to the coil. Features Hardened and ground working parts to give long life and very low leakage. IP69K Tough coil compatibility, continuously rated. Compact design with low pressure drop. Profile view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure bar ( psi) Cartridge endurance rating million cycles Cartridge fatigue pressure rating (NFPA/T.6. R-) bar ( psi) Rated 5 psid, 8.5 gpm min, 9. gpm nom Leakage (fully closed) 5 drops/min psi Nominal supply voltage / VDC Current to open valve 9- ma (V coil), 5-5 ma (V coil) Temperature range - to 9 C (- to 9 F) Maximum oil temperature C (8 F) Maximum internal oil temperature C (9 F) Cavity C-- All general purpose hydraulic fluids such as: MIL-H-566, SAE, Fluids SAE, etc. Filtration Cleanliness code 8/6/ Housing material (standard) Aluminum Hysterisis USgpm with dither Weight cartridge only. kg (.8 lbs) Seal kit 5658 (una-n), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a way position, pilot operated poppet type, normally closed, proportional flow control screw in cartridge valve. Ideal for lowering circuits or in conjunction with pressure compensators to provide proportional flow control to any actuator. Pressure drop curves Flow - USgpm Pressure Drop At Max Poppet Opening Pressure Drop - PSID Flow - USgpm 6 8 Flow vs. Current at 5 PSID Current - Amps - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

23 ESV--C - Proportional valve Proportional flow control, normally closed, poppet Up to 7 L/min (8.5 USgpm) bar ( psi) Model code ESV * C * ** *** * * * ** ** Function ESV - Proportional flow control Size - size Seal material lank - una-n V - Viton Style C - Normally closed 5 Housing material lank - Cartridge only A - Aluminum Port size Code Port size Housing number Aluminium Coil series lank - No coil J - J Series, W Cartridge only For coil part numbers and dimensions see section C. /8" SPP T SAE Coil special features G /8" SPP 8767 lank - No coil 6H SAE No special feature 8H SAE See section J for housing details. 7 Coil voltage - No coil D - VDC D - VDC 8 Type of power lank - No coil D - DC w/o diode - DC w/o diode 9 Connector type lank - No coil G - ISO DIN 65 Q - Spade Terminals W - Flying Lead N - Deutsch (DC only) Y - Amp JR (DC only) P - Conduit For coil part numbers and dimensions see section C. Valve special features lank - None Dimensions mm (inch) Cartridge only Installation drawing 9, HEX (.75) 59, (.) 5. (.) 5, HEX (.) X 7. (.8) 6.5 (.5).8 (.8),7 (.5),875 - THD.,6 (.6) 9.5 (.7) 6.5 (.5) 9. (.75) Ø 5,8 (.6) Ø 8,9 (.5) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 -

24 ESV--C - Proportional valve Proportional flow control, normally closed, poppet Up to L/min (7. USgpm) bar ( psi) Operation In the de-energized position, this valve blocks flow from port to port and free flow is allowed from port to port. In the energized position, flow from port to port is restricted while free flow is allowed from port to port. The valve flow is proportional to the current applied to the coil. Features Hardened and ground working parts to give long life and very low leakage. IP69K Tough coil compatibility, continuously rated. Compact design with low pressure drop. Profile view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure bar ( psi) Cartridge endurance rating million cycles Cartridge fatigue pressure rating (NFPA/T.6. R-) bar ( psi) Rated 5 psid, 7. gpm min, 8.9 gpm nom Leakage (fully closed) 5 drops/min psi Nominal supply voltage / VDC Current to open valve 8-9 ma (V coil), -5 ma (V coil) Temperature range - to 9 C (- to 9 F) Maximum oil temperature C (8 F) Maximum internal oil temperature C (9 F) Cavity C-- All general purpose hydraulic fluids such as: MIL-H-566, SAE, Fluids SAE, etc. Filtration Cleanliness code 8/6/ Housing material (standard) Aluminum Hysterisis USgpm with dither Weight cartridge only. kg (.8 lbs) Seal kit (una-n), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a way position, pilot operated poppet type, normally closed, proportional flow control screw in cartridge valve. Ideal for lowering circuits or in conjunction with pressure compensators to provide proportional flow control to any actuator. Pressure drop curves Flow - USgpm Pressure Drop At Max Poppet Opening Pressure Drop - PSID Flow - USgpm Flow vs. Current at 5 PSID Current - Amps - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

25 ESV--C - Proportional valve Proportional flow control, normally closed, poppet Up to L/min (7. USgpm) bar ( psi) Model code ESV * C * **** *** * * * ** ** Function ESV - Proportional flow control Size - size Seal material lank - una-n V - Viton Style C - Normally closed 5 Housing material lank - Cartridge only A - Aluminum Dimensions mm (inch) Cartridge only Port size Code G GU 6G 6GU T Port size Cartridge only /" SPP /" SPP /" SPP /" SPP SAE Housing number Aluminium single Connector type lank - No coil G - ISO DIN 65 Q - Spade Terminals W - Flying Lead N - Deutsch (DC only) Y - Amp JR (DC only) P - Conduit For coil part numbers and dimensions see section C. TU SAE -66 Coil series T SAE -66 lank - No coil J - J Series, W TU SAE -665 For coil part numbers and See section J for housing details. dimensions see section C. 7 Coil voltage - No coil D - VDC D - VDC 8 Type of power lank - No coil D - DC w/o diode - DC w/o diode Installation drawing Coil special features lank - No coil - No special feature Valve special features lank - None 59, (.87) 9, HEX (.75).7 (.5) 7.9 (.87).7 (.5) 5. (.),7 (.76),8 HEX (.5).6 - THD.,6 (.6) 88.9 (.5) 6.5 (.5) 88.9 (.5) 6.5 (.5) X Ø. (.6) 8.7 (.) Ø,75 (.95) Ø 8,9 (.5) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

26 ESV-8-O - Proportional valve Proportional flow control, normally open, poppet Up to L/min (8. USgpm) bar ( psi) Operation In the de-energized position, this valve allows free flow from port to port and restricts flow from port to port. In the energized position, flow is blocked from port to port, and free flow is allowed from port to port. The valve flow is proportional to the current applied to the coil. Features Hardened and ground working parts to give long life and very low leakage. IP69K Tough coil compatibility, continuously rated. Compact design with low pressure drop. Profile view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) bar ( psi) Cartridge endurance rating million cycles Cartridge fatigue pressure rating (NFPA/T.6. R-) bar ( psi) Rated 5 psid, 8. gpm min, 9. gpm nom Leakage (fully closed) 5 drops/min, psi Nominal supply voltage / VDC Current to fully close valve -5 ma (V coil), ma (V coil) Temperature range - to 9 C (- to 9 F) Maximum oil temperature C (8 F) Maximum internal oil temperature C (9 F) Cavity C-8- All general purpose hydraulic fluids such as: MIL-H-566, SAE, Fluids SAE, etc. Filtration Cleanliness code 8/6/ Housing material (standard) Aluminum Hysterisis USgpm with dither Weight cartridge only. kg (. lbs) Seal kit (una-n), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a way position, pilot operated poppet type, normally open, proportional flow control screw in cartridge valve. Ideal for lowering circuits or in conjunction with pressure compensators to provide proportional flow control to any actuator. Pressure drop curves Flow - USgpm Pressure Drop - PSID Flow - USgpm Current - Amps -6 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

27 ESV-8-O - Proportional valve Proportional flow control, normally open, poppet Up to L/min (8. USgpm) bar ( psi) Model code ESV 8 * O * ** *** * * * ** * Function ESV - Proportional flow control Size 8-8 size Seal material N - una-n V - Viton Style O - Normally open 5 Housing material lank - Cartridge only A - Aluminum Port size Code Port size Housing number Coil series lank - No coil S - S Series, W Aluminium For coil part numbers and Cartridge only dimensions see section C. G /8" SPP -678 T 6T 8T SAE SAE 6 SAE Coil special features lank - No coil - No special feature See section J for housing details. 7 Coil voltage - No coil D - VDC D - VDC 8 Type of power lank - No coil D - DC w/o diode - DC w/o diode 9 Connector type lank - No coil G - ISO DIN 65 Q - Spade Terminals W - Flying Lead N - Deutsch (DC only) Y - Amp JR (DC only) P - Conduit For coil part numbers and dimensions see section C. Valve special features lank - None Dimensions mm (inch) Cartridge only 9, HEX (.75) Installation drawing 6. (.5) 9. (.75) 9. (.75) 6, (.5) 7,8 (.9), HEX (.87),75-6 THD 6, (.) 5.5 (.6) 8. (.5) X (.8) (.). (.). (.7) 5.8 (.) Ø,6 (.97) Ø,8 (.5) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

28 ESV--O - Proportional valve Proportional flow control, normally open, poppet Up to 7 L/min (8.5 USgpm) bar ( psi) Operation In the de-energized position, this valve allows free flow from port to port and restricts flow from port to port. In the energized position, flow is blocked from port to port, and free flow is allowed from port to port. The valve flow is proportional to the current applied to the coil. Features Hardened and ground working parts to give long life and very low leakage. IP69K Tough coil compatibility, continuously rated. Compact design with low pressure drop. Profile view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure bar ( psi) Cartridge endurance rating million cycles Cartridge fatigue pressure rating (NFPA/T.6. R-) bar ( psi) Rated 5 psid, 8.5 gpm min, 9. gpm nom Leakage (fully closed) 5 drops/min, psi Nominal supply voltage / VDC Current to fully close valve - ma (V coil), 5-6 ma (V coil) Temperature range - to 9 C (- to 9 F) Maximum oil temperature C (8 F) Maximum internal oil temperature C (9 F) Cavity C-- All general purpose hydraulic fluids such as: MIL-H-566, SAE, Fluids SAE, etc. Filtration Cleanliness code 8/6/ Housing material (standard) Aluminum Hysterisis USgpm with dither Weight cartridge only. kg (. lbs) Seal kit 5658 (una-n), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a way position, pilot operated poppet type, normally open, proportional flow control screw in cartridge valve. Ideal for lowering circuits or in conjunction with pressure compensators to provide proportional flow control to any actuator. Pressure drop curves Flow - USgpm Current - Amps Pressure Drop - PSID Flow - USgpm -8 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

29 ESV--O - Proportional valve Proportional flow control, normally open, poppet Up to 7 L/min (8.5 USgpm) bar ( psi) Model code ESV * O * ** *** * * * ** ** Function ESV - Proportional flow control Size - size Seal material N - una-n V - Viton Style C - Normally closed 5 Housing material lank - Cartridge only A - Aluminum 6 Port size Code Port size Housing number Aluminium Coil series lank - No coil J - J Series, W Cartridge only For coil part numbers and dimensions see section C. G /8" SPP H SAE Coil special features 8H SAE lank - No coil See section J for housing details. - No special feature 7 Coil voltage - No coil - VDC - VDC 8 Type of power lank - No coil D - DC w/o diode - DC w/o diode 9 Connector type lank - No coil G - ISO DIN 65 Q - Spade Terminals W - Flying Lead N - Deutsch (DC only) Y - Amp JR (DC only) P - Conduit For coil part numbers and dimensions see section C. Valve special features lank - None Dimensions mm (inch) Cartridge only Installation drawing 9, HEX (.75) 7, (.77) 5. (.) X 7. (.8) 6.5 (.5).8 (.8),7 (.5) 5, HEX (.),875 - THD.,6 (.6) 9.5 (.7) 6.5 (.5) 9. (.75) Ø 5,8 (.6) Ø 8,9 (.5) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

30 ESV--O - Proportional valve Proportional flow control, normally open, poppet Up to L/min (7. USgpm) bar ( psi) Operation In the de-energized position, this valve allows free flow from port to port and restricts flow from port to port. In the energized position, flow is blocked from port to port, and free flow is allowed from port to port. The valve flow is proportional to the current applied to the coil. Features Hardened and ground working parts to give long life and very low leakage. IP69K Tough coil compatibility, continuously rated. Compact design with low pressure drop. Profile view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure bar ( psi) Cartridge endurance rating million cycles Cartridge fatigue pressure rating (NFPA/T.6. R-) bar ( psi) Rated 5 psid, 7. gpm min, 8.9 gpm nom Leakage (fully closed) 5 drops/min psi Nominal supply voltage / VDC Current to fully close valve 8-9 ma (V coil), -5 ma (V coil) Temperature range - to 9 C (- to 9 F) Maximum oil temperature C (8 F) Maximum internal oil temperature C (9 F) Cavity C-- All general purpose hydraulic fluids such as: MIL-H-566, SAE, Fluids SAE, etc. Filtration Cleanliness code 8/6/ Housing material (standard) Aluminum Hysterisis USgpm with dither Weight cartridge only. kg (. lbs) Seal kit (una-n), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a way position, pilot operated poppet type, normally open, proportional flow control screw in cartridge valve. Ideal for lowering circuits or in conjunction with pressure compensators to provide proportional flow control to any actuator. Pressure drop curves Flow - USgpm Pressure Drop - PSID Flow - USgpm Flow vs. Current at 5 PSID Current - Amps Flow - L/min - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

31 ESV--O - Proportional valve Proportional flow control, normally open, poppet Up to L/min (7. USgpm) bar ( psi) Model code ESV * O * ** ** * * * ** ** Function ESV - Proportional flow control Size - size Seal material lank - una-n V - Viton Style O - Normally open 5 Housing material lank - Cartridge only A - Aluminum Port size 9 Connector type Code Port size Housing number lank - No coil G - ISO DIN 65 Aluminium Q - Spade Terminals 6G 6GU T TU T Cartridge only /" SPP /" SPP SAE SAE SAE W -Flying Lead N - Deutsch (DC only) Y - Amp JR (DC only) P - Conduit For coil part numbers and dimensions see section C. TU SAE -665 Coil series See section J for housing details. lank - No coil J - J Series, W 7 Coil voltage 8 Type of power For coil part numbers and dimensions see section C. - No coil -VDC - VDC lank - No coil D - DC w/o diode - DC w/o diode Coil special features lank - No coil - No special feature Dimensions mm (inch) Valve special features lank - None Cartridge only Installation drawing 7, (.87) 9, HEX (.75).7 (.5) 7.9 (.87).7 (.5) 5. (.),8 HEX (.5) 88.9 (.5) 6.5 (.5) 8.7 (.),7 (.76).6 - THD.,6 (.6) 6.5 (.5) 88.9 (.5) X Ø. (.6) Ø,75 (.95) Ø 8,9 (.5) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 -

32 EFV--C - Proportional valve Proportional flow, normally open, poppet Up to 8 L/min ( USgpm) bar ( psi) Profile view Operation The valve is controlled by current supplied to the coil. At zero current, the valve is fully closed from port to port. At 5 ma (V coil) the valve is considered fully open. This is the maximum intended current level for use in applications. Port is used for pressure balancing the spool and armature and must be blocked in all cases. The maximum intended pressure drop is PSID. At pressure drops above PSID, almost no increase in flow is obtained. The intended flow direction is from port to port. Operation of the valve with flow from port to port will produce flow vs current and flow vs pressure drop curves that are significantly different from those obtained with flow from port to port. Since the spool and armature are pressure balanced, the operating pressure does not affect the operating characteristics of the valve. The operating point of the valve is determined only by current, pressure drop and temperature. Features Hardened and ground working parts to give long life with good control; Compact design with low pressure drop.ip69k Tough coil compatibility, continuously rated. Description This is a way position, pilot operated spool type, normally closed, proportional flow control screw in cartridge valve. Ideal for speed control and in conjunction with pressure compensators to provide proportional pressure compensated flow control to any actuator. Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure Cartridge endurance rating Cartridge fatigue pressure (infinite life) Rated flow Internal leakage Nominal supply voltage Current to fully close valve Recommended PWM frequency Coil resistance Mass Temperature range Maximum oil temperature Maximum internal coil temperature Cavity bar ( psi) million cycles bar ( psi) NFPA rated Flow rating A 5. L/min ( USgpm) Flow rating. L/min (8 USgpm) Flow rating C 7.9 L/min ( USgpm) 97 cm /min (in PSID / V 5-6 ma (V coil), 75-8 ma (V coil) - Hz.7v V/V, 9.V/V Cartridge only,7 kg (.8 lb), cartridge with coil and end nut,7 kg (.6 lb) - to 9 C (- to 9 F) C (8 F) C (9 F) C-- All general purpose hydraulics fluids such as: MIL-H-566, SAE, SAE, DTE, etc. Fluids Filtration Cleanliness code 8/6/ Housing material (standard) Aluminum or steel Hysterisis USgpm with Hz PWM driver Seal kit 995- (una-n), 996- (Viton ) Viton is a registered trademark of E.I. DuPont - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

33 EFV--C - Proportional valve Proportional flow, normally open, poppet Up to 8 L/min ( USgpm) bar ( psi) Max Flow vs. Pressure drop Flow rating A at zero current Flow - USgpm Pressure Drop - bar Pressure Drop - PSID Flow - L/min Max Flow vs. Pressure drop Flow rating at zero current Flow - USgpm Pressure Drop - bar Pressure Drop - PSID Flow - L/min Max Flow vs. Pressure drop Flow rating C at zero current Flow - USgpm Pressure Drop - bar Pressure Drop - PSID Flow - L/min Flow vs. Current Flow % Current - ma Note: To determine operating characteristics for the flow rating selected, at a specific differential pressure, first determine maximum flow from upper curve at the differential pressure value. This will be the % flow on the lower curve. Parameters: Hz PWM Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 -

34 EFV--C - Proportional valve Proportional flow, normally open, poppet Up to 8 L/min ( USgpm) bar ( psi) Model Code EFV * C * * * *** *****E** Function EFV - Electro proportional flow control valve 6 Manual override option - No core tube special features S - Screw-in 7 Valve housing material lank - Cartridge only A - Aluminum S - Steel 9 Coil series E - E series coils * These model digits will not be stamped on the valve. Size - size 8 Port size For coil part numbers and dimensions see section C. Seal material N - una-n V - Viton Logic C - Normally closed Code Port size Housing number Aluminium single Steel single Cartridge only /8" SPP -758* 6T SAE * -75 8T SAE G /" SPP Special features - None Only required when valve has special features, omitted if. 5 Flow rating A - 6 PSID PSID C - 6 PSID G /8" SPP H SAE H SAE Note: oth the manifold and port plug are required. See section J for housing details. *Aluminum Light duty. - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

35 EFV--C - Proportional valve Proportional flow, normally open, poppet Up to 8 L/min ( USgpm) bar ( psi) Dimensions mm (inch) Torque cartridge in housing S Nm (5-55 ft lbs) A Nm (5- ft lbs) Note: S type manual override shown. DIN 65 connector shown. Note: Port is unused and must be plugged. Cartridge only, (.7),8 (.9), (.6) 8,5 (.7) 8,5 (.7), (.8) 86, (.) 6, (.5) 6,7 (.) 7, (.86) Installation drawing (Aluminum) 86. (.),6 (.97) 5, (.) 8,8 (.7) 57. (.5) X7, (.8),8 (.7) 75, (.97) 5 (.97) 9.5 (.8) 57.5 (.5) 75. (.97) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

36 EFV--C - Proportional valve Proportional flow, normally closed spool Up to 77 L/min (.6 USgpm) bar ( psi) Profile view Operation The valve is controlled by current supplied to the coil. At zero current, the valve is fully closed from port to port. At 5 ma (V coil) the valve is considered fully open. This is the maximum intended current level for use in applications. Port is used for pressure balancing the spool and armature and must be blocked in all cases. The maximum intended pressure drop is PSID. At pressure drops above PSID, almost no increase in flow is obtained. The intended flow direction is from port to port. Operation of the valve with flow from port to port will produce flow vs current and flow vs pressure drop curves that are significantly different from those obtained with flow from port to port. Since the spool and armature are pressure balanced, the operating pressure does not affect the operating characteristics of the valve. The operating point of the valve is determined only by current, pressure drop and temperature. Features Hardened and ground working parts to give long life with good control; Compact design with low pressure drop.ip69k Tough coil compatibility, continuously rated. Description This is a way position, pilot operated spool type, normally closed, proportional flow control screw in cartridge valve. Ideal for speed control and in conjunction with pressure compensators to provide proportional pressure compensated flow control to any actuator. Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure bar ( psi) Cartridge endurance rating million cycles Cartridge fatigue pressure (infinite life) bar ( psi) NFPA rated Flow rating A 55 L/min (. USgpm) Rated flow Flow rating 77 L/min (.6 USgpm) Internal leakage (fully closed) 77-8 cm /min (5- in bar ( PSID) Nominal supply voltage / V Current to fully close valve 5-6 ma (V coil), 75-8 ma (V coil) Recommended dither frequency - Hz Coil resistance.7v V/V, 9.V/V Cartridge only,7 kg (.8 lb), cartridge with coil and end nut Mass,7 kg (.6 lb) Temperature range - to 9 C (- to 9 F) Maximum oil temperature C (8 F) Maximum internal coil temperature C (9 F) Cavity C-- All general purpose hydraulics fluids such as: MIL-H-566, SAE Fluids, SAE, DTE, etc. Filtration Cleanliness code 8/6/ Housing material (standard) Aluminum or steel Hysterisis USgpm with Hz PWM driver Seal kit 997- (una-n), 997- (Viton ) Viton is a registered trademark of E.I. DuPont -6 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

37 EFV--C - Proportional valve Proportional flow, normally closed spool Up to 77 L/min (.6 USgpm) bar ( psi) Max flow vs. Pressure drop Flow rating A at zero current Max flow vs. Pressure drop Flow rating at zero current Flow vs. Current Flow - USgpm Pressure Drop - bar FPO Pressure Drop - PSID Flow - L/min Note: To determine operating characteristics for the flow rating selected, at a specific differential pressure, first determine maximum flow from upper curve at the differential pressure value. This will be the % flow on the lower curve. Parameters: Hz PWM Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

38 EFV--C - Proportional valve Proportional flow, normally closed spool Up to 77 L/min (.6 USgpm) bar ( psi) Model code EFV * C * * * *** *****E** Function EFV - Electro proportional flow control valve Size - size 6 Manual override option - No core tube special features S - Screw-in 8 Port size 7 Valve housing material lank - Cartridge only A - Aluminum S - Steel 9 Coil series E - E series coils *These model digits will not be stamped on the valve. For coil part numbers and dimensions see section C. Seal material N - una-n V - Viton Logic C - Normally closed Code Port size Housing number Aluminium single Steel single Cartridge only G /" SPP G /" SPP T SAE T SAE Special features - None Only required when valve has special features, omitted if. 5 Flow rating A -. PSID -.6 PSID Note: oth the manifold and port plug are required. See section J for housing details. -8 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

39 EFV--C - Proportional valve Proportional flow, normally closed spool Up to 77 L/min (.6 USgpm) bar ( psi) Dimensions mm (inch) Torque cartridge in steel housing S Nm (- ft lbs) A - 8- Nm (8-9 ft lbs) Note: Port is unused and must be plugged. Note: EFV- with DIN-65 connector shown. Cartridge only Installation drawing (Aluminum), (.7),8 (.9) 9, (.75) 5. (.) (.6).7 (.5) 5. (.) 86, (.) 6, (.5) 8.7 (.) 8 (.5) 8.55 (.5).5 (.75) 76. (.) 88.9 (.5) 5.6 (.).6 68,6 (.7) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

40 EFV--O - Proportional valve Proportional flow, normally open, poppet Up to 8 L/min ( USgpm) bar ( psi) Profile view Operation The valve is controlled by current supplied to the coil. At zero current, the valve is fully open from port to port. At 5 to 6 ma (V coil) the valve is fully closed. Port is used for pressure balancing the spool and armature and must be blocked in all cases. The maximum intended pressure drop is PSID. At pressure drops above PSID, almost no increase in flow is obtained. The intended flow direction is from port to port. Performance data Operation of the valve with flow from port to port will produce flow vs current and flow vs pressure drop curves that are significantly different from those obtained with flow from port to port. Since the spool and armature are pressure balanced, the operating pressure does not affect the operating characteristics of the valve. The operating point of the valve is determined only by current, pressure drop and temperature. Features Hardened and ground working parts to give long life with good control; Compact design with low pressure drop.ip69k Tough coil compatibility, continuously rated. Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure bar ( psi) Cartridge endurance rating million cycles Cartridge fatigue pressure (infinite life) bar ( psi) NFPA rated Flow rating A 5. L/min ( USgpm) Flow rating. L/min (8 USgpm) Rated flow Flow rating C 7.9 L/min ( USgpm) Internal leakage 97 cm /min (in ( PSID) Nominal supply voltage / V Current to fully close valve 5-6 ma (V coil), 75-8 ma (V coil) Recommended PWM frequency - Hz Coil resistance.7v V/V, 9.V/V Cartridge only,7 kg (.8 lb), cartridge with coil and end nut Mass,7 kg (.6 lb) Temperature range - to 9 C (- to 9 F) Maximum oil temperature C (8 F) Maximum internal coil temperature C (9 F) Cavity C-- All general purpose hydraulics fluids such as: MIL-H-566, Fluids SAE, SAE, DTE, etc. Filtration Cleanliness code 8/6/ Housing material (standard) Aluminum or steel Hysterisis USgpm with Hz PWM driver Seal kit 995- (una-n), 996- (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a way position, pilot operated spool type, normally open, proportional flow control screw in cartridge valve. Ideal for speed control and in conjunction with pressure compensators to provide proportional pressure compensated flow control to any actuator. Pressure drop curves USgpm Flow Pressure Drop - PSID L/min Flow - USgpm Flow Pressure Drop - PSID L/min Flow - - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

41 Flow % EFV--O - Proportional Valve Up to 8 L/min ( USgpm) bar ( psi) Performance Curves Max. flow vs Pressure drop Flow rating A (Valve fully open) Max. flow vs Pressure drop Flow rating (Valve fully open) USgpm Flow - Pressure Drop - bar Pressure Drop - PSID L/min Flow - USgpm Flow - Pressure Drop - bar Pressure Drop - PSID L/min Flow - Max. Flow flow vs vs Pressure Drop drop Flow rating C "C" (Valve fully open) Flow vs. Current USgpm Flow - Pressure Drop - bar Current - ma Pressure Drop - PSID Note: Note: To To determine operating operating characteristics for the flow rating selected, at a specific differential characteristics for the flow pressure, first determine maximum flow from upper curve at rating the differential selected, pressure at a specific value. This will be the % differential flow flow pressure, on the lower first curve. determine maximum flow from upper curve at the differential pressure Hz PWMvalue. Parameters: This will be the % flow flow on the lower curve. L/min Flow - Parameters: Hz PWM Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 -

42 EFV--O - Proportional valve Proportional flow, normally open, poppet Up to 8 L/min ( USgpm) bar ( psi) Model code EFV * * * * *** *****E** Function EFV - Electro proportional flow control valve 6 Manual override option - No core tube special features S - Screw-in 7 Valve housing material lank - Cartridge only A - Aluminum S - Steel 9 Coil series E - E series coils * These model digits will not be stamped on the valve. Size - size 8 Port size For coil part numbers and dimensions see section C. Code Port size Housing number Seal material N - una-n V - Viton Aluminium single Steel single Cartridge only /8" SPP -758* 6T SAE * -75 Special features - None Only required when valve has special features, omitted if. Logic - Normally open 8T SAE G /8" SPP H SAE Flow rating A - 6 PSID PSID C - 6 PSID 8H SAE Note: oth the manifold and port plug are required. See section J for housing details. *Aluminum Light duty. - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

43 EFV--O - Proportional valve Proportional flow, normally open, poppet Up to 8 L/min ( USgpm) bar ( psi) Dimensions mm (inch) Torque cartridge in housing S Nm (5-55 ft lbs) A Nm (5- ft lbs) Note: S type manual override shown. DIN 65 connector shown. Note: Port is unused and must be plugged. Cartridge only, (.7),8 (.9), (.6) 8,5 (.7) 8,5 (.7), (.8) 86, (.) 6, (.5) 6,7 (.) 7, (.86) Note: EFV- with DIN-65 connector Note: Port is unused and must be plugged. Note - S type manual override shown Installation drawing (Aluminum) 86. (.),6 (.97) 5, (.) 8,8 (.7) 57. (.5) X7, (.8),8 (.7) 75, (.97) 5 (.97) 9.5 (.8) 57.5 (.5) 75. (.97) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 -

44 EFV--O - Proportional valve Proportional flow, normally open spool Up to L/min (7.5 USgpm) bar ( psi) Profile view Operation The valve is controlled by current supplied to the coil. At zero current, the valve is fully open from port to port. At 5 to 6 ma (V coil) the valve is fully closed. Port is used for pressure balancing the spool and armature and must be blocked in all cases. The maximum intended pressure drop is PSID. At pressure drops above PSID, almost no increase in flow is obtained. The intended flow direction is from port to port. Operation of the valve with flow from port to port will produce flow vs current and flow vs pressure drop curves that are significantly different from those obtained with flow from port to port. Since the spool and armature are pressure balanced, the operating pressure does not affect the operating characteristics of the valve. The operating point of the valve is determined only by current, pressure drop and temperature. Features Hardened and ground working parts to give long life with good control; Compact design with low pressure drop.ip69k Tough coil compatibility, continuously rated. Performance data Ratings and specifications Description This is a way position, pilot operated spool type, normally open, proportional flow control screw in cartridge valve. Ideal for speed control and in conjunction with pressure compensators to provide proportional pressure compensated flow control to any actuator. Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure bar ( psi) Cartridge endurance rating million cycles Cartridge fatigue pressure (infinite life) bar ( psi) NFPA rated Flow rating A 95 L/min (5 USgpm) Rated flow Flow rating L/min (7.5 USgpm) Internal leakage (fully closed) 77-8 cm /min (5- in bar ( PSID) Nominal supply voltage / V Current to fully close valve 5-6 ma (V coil), 75-8 ma (V coil) Recommended PWM frequency - Hz Coil resistance.7v V/V, 9. V/V Cartridge only,7 kg (.8 lb), cartridge with coil and end nut Mass,7 kg (.6 lb) Temperature range - to 9 C (- to 9 F) Maximum oil temperature C (8 F) Maximum internal coil temperature C (9 F) Cavity C-- All general purpose hydraulics fluids such as: MIL-H-566, SAE Fluids, SAE, etc. Filtration Cleanliness code 8/6/ Housing material (standard) Aluminum or steel Hysterisis USgpm with Hz PWM driver Seal kit 997- (una-n), 997- (Viton ) Viton is a registered trademark of E.I. DuPont - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

45 Flow % EFV--O - Proportional valve Up to L/min (7.5 USgpm) bar ( psi) Performance Curves Max. flow vs Pressure drop Flow rating A (Zero Current) Max. flow vs Pressure drop Flow rating (Zero Current) Flow - USgpm Pressure Drop - bar Flow - L/min Flow - USgpm Pressure Drop - bar Flow - L/min Pressure Drop - PSID Pressure Drop - PSID Flow vs Current Note: To determine operating characteristics for the flow rating selected, at a specific differential pressure, first determine maximum flow from upper curve at the differential pressure value. This will be the % flow on the lower curve. Parameters: Hz PWM Current - ma Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

46 EFV--O - Proportional valve Proportional flow, normally open spool Up to L/min (7.5 USgpm) bar ( psi) Model code EFV * * * * *** *****E** Function EFV - Electro proportional flow control valve 6 Manual override option - No core tube special features S - Screw-in 7 Valve housing material lank - Cartridge only A - Aluminum S - Steel 9 Coil series E - E series coils * These model digits will not be stamped on the valve. Size - size 8 Port size For coil part numbers and dimensions see section C. Seal material N - una-n V - Viton Logic - Normally open Code Port size Housing number Aluminium single Steel single Cartridge only G /" SPP G /" SPP T SAE T SAE Special features - None Only required when valve has special features, omitted if. 5 Flow rating A - 5. PSID PSID Note: oth the manifold and port plug are required. See section J for housing details. -6 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

47 EFV--O - Proportional Valve Proportional flow, normally open spool Up to L/min (7.5 USgpm) bar ( psi) Dimensions mm (inch) Torque cartridge in housing S Nm (- ft lbs) A - 8- Nm (8-9 ft lbs) Note: Port is unused and must be plugged. Note: EFV- with DIN- 65 connector shown. Cartridge only, (.7),8 (.9) 9, (.75).6 86, (.) 6, (.5) 68,6 (.7) Installation drawing (Aluminum) 5. (.) (.6).7 (.5) 5. (.) 8.7 (.) 8 (.5) 8.55 (.5) 5.6 (.).5 (.75) 76. (.) 88.9 (.5) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

48 ESV9-8-E - Proportional solenoid valve -way, -position, screw-in cartridge, proportional solenoid valve Up to L/min (.9 USgpm) Up to 5 bar (6 psi) COIL COIL A Operation In the de-energized (center) position, all ports are blocked. When solenoid A is energized, flow is directed from port to port and from port to port. Port is not intended to be used as an inlet. When solenoid is energized, flow is directed from port to port and from port to port. Port is not intended to be used as an inlet. Features Highly engineered components Compact design with low pressure drop Designed for optimized linearity and hysteresis IP69K ToughCoils compatible Optional manual override Industry standard cavity tool Profile view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) "COIL " Typical application pressure Operating Pressure Port (T) Operating Pressure Port, and (A, P and ) bar (, psi) 5 bar (,6 psi) Cartridge fatigue pressure (infinite life) Port (T) Port, and (A, P and ) bar (, psi) 5 bar (,6 psi) Rated burst pressure 75 bar (,6 psi) per NFPA/T-6- R- Rated flow. L/min (.9 USgpm) "COIL A Temperature range - to C (- to 8 F) Coil power W* Maximum hysteresis 7.% Step response 7 ms to 9% flow Cavity C-8- Fluids All general purpose hydraulic fluids such as: MIL-H-566, SAE, SAE etc. Filtration Cleanliness code 8/6/ Standard housing material Steel Weight including coils.5 kg (. lbs) Seal kit (una-n), (Viton ) Internal leakage 65 cm /min ( in /min) bar ( psi) Viton is a registered trademark of E.I. DuPont. *AC coils must be used with a rectifying connector. Description The ESV9 with E spool is a proportional four-way, three-position, direct acting, spool type solenoid valve with all ports closed in the de-energized position. This valve is ideal for moderate flow applications where an actuator needs to be controlled proportionally in both directions and stopped in any position. Pressure drop 8 6 A C D Flow vs. Current at bar P A - Port to port - Port to port 8 6 C - Port to port D - Port to port Coil A Coil -8 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

49 ESV9-8-F - Proportional solenoid valve -way, -position, screw-in cartridge, proportional solenoid valve Up to L/min (.9 USgpm) Up to 5 bar (6 psi) COIL COIL A Operation In the de-energized (center) position, port, port, and port are open to each other while port is blocked. When solenoid A is energized, flow is directed from port to port and from port to port. When solenoid is energized, flow is directed from port to port and from port to port. Features Highly engineered components Compact design with low pressure drop Designed for optimized linearity and hysteresis IP69K ToughCoils compatible Optional manual override Industry standard cavity tool. Profile view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) "COIL " Typical application pressure Operating Pressure Port (T) Operating Pressure Port, and (A, P and ) bar (, psi) 5 bar (,6 psi) Cartridge fatigue pressure (infinite life) Port (T) Port, and (A, P and ) bar (, psi) 5 bar (,6 psi) Rated burst pressure 75 bar (,6 psi) per NFPA/T-6- R- Rated flow. L/min (.9 USgpm) "COIL A Temperature range Coil power - to C (- to 8 F) W** Maximum hysteresis 7.% Step response 7 ms to 9% flow Cavity C-8- Fluids All general purpose hydraulic fluids such as: MIL-H-566, SAE, SAE etc. Filtration Cleanliness code 8/6/ Standard housing material Steel Weight including coils. kg (. lbs) Seal kit (una-n), (Viton ) Internal leakage 5 cm /min (5 in /min) bar ( psi) Viton is a registered trademark of E.I. DuPont. Description The ESV9 with F spool is a proportional four way, three position, direct acting, spool type solenoid valve. In the de-energized condition Port and are open to tank with the inlet port blocked. This valve is ideal for moderate flow applications where an actuator needs to be moved in both directions and stopped in any position while allowing the service ports to decay to tank pressure in the de-energized condition. Pressure drop F D E A - Port or port energized - Port to port energized C - Port or port energized D - Port to port de-energized A C E - Port to port energized F - Port to port de-energized Flow vs. Current at bar P Flow(lpm)/Pressure(bar) Flow(lpm)/Pressure(bar) Coil Current (A) Coil A Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

50 ESV9-8 - Proportional solenoid valve -way, -position, screw-in cartridge, proportional solenoid valve Up to L/min (.9 USgpm) Up to 5 bar (6 psi) Model code ESV9 8 * * * *** **** * * ** ** A Function ESV9 - Proportional solenoid valve Size 8-8 size Spool center condition E COIL COIL A F COIL COIL A 9 Coil series lank - No coil P - P Series ToughCoils W Coil special feature - None Seal material lank - una-n V - Viton 5 Manual override option - No manual override M - Manual override, push pull type For valve dimensions with manual override, see pages Housing material and ports Code Port size Housing number Aluminium Steel Cartridge only AG / SPP -677 AG /8 SPP -678 A6H SAE A8H SAE SG / SPP -675 SG /8 SPP -675 S6T SAE S8T SAE See section J for housing details. Valve special features - None (Only required if valve has special features omitted if.) Design code A - Design code These model digits are not stamped on the valve. Warning Aluminum housings can be used for pressures up to bar ( psi). Steel housings must be used for operating pressures above bar ( psi). 7 Coil voltage and type - No coil D - V DC without diode D - V DC without diode - V DC with diode - V DC with diode 8 Connection type lank - No coil N - Deutsch male, DT-P, integrated G - DIN 65 W - Flying lead Y - Amp Jr (DC Only) Mating Connector: AMP 96- or equivalent D - MetriPackR 5 Male, Integrated (DC Only) Mating Connector: Delphi 56 See Section C for coil details. -5 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

51 ESV9-8 - Proportional solenoid valve -way, -position, screw-in cartridge, proportional solenoid valve Up to L/min (.9 USgpm) 5 bar ( psi) Dimensions mm (inch) Torque cartridge in aluminum housing - Nm (5. -. ft. lbs.) and - Nm (5. -. ft. lbs.) in a steel housing ESV9-8 without MO. [.6] ESV9-8 with MO. [.6 ] When solenoid valve is ordered without coils, it will be supplied with coil spacer and coil nut. n.8 [.5] n.8 [.5] Spare parts Coil Nut for MO "COIL ". [ 5.6 ] "COIL " Coil Nut without MO [.8 ] Coil Spacer -867 "COIL A" "COIL A" Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on coil nut. Over tightening may cause valve failure. 5.5 [.5]. HEX A/F [.87] /-6 UNF-A THD 5.5 [.5]. HEX A/F [.87].75-6 UNF-A THD Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

52 ESV9- - Proportional solenoid valve -way, -position, screw-in cartridge, proportional solenoid valve Up to L/min (5.8 USgpm) Up to 5 bar (6 psi) Model code ESV9 * * * *** **** * * ** ** A Function ESV9 - Proportional solenoid valve Size - size Spool center condition E COIL COIL A F 5 COIL COIL A 9 9 Coil series lank - No coil L - L Series Large ToughCoils 8 W Coil special feature - None Seal material lank - una-n V - Viton 5 Manual override option - No manual override M - Manual override, push pull type For valve dimensions with manual override, see pages Housing material and ports Code Port size Housing number Aluminium Steel Cartridge only AG / SPP -858 AG /8 SPP A6H SAE A8H SAE SG / SPP -759 SG /8 SPP -75 S6T SAE S8T SAE See section J for housing details. Valve special features - None (Only required if valve has special features omitted if.) Design code A - Design code These model digits are not stamped on the valve. Warning Aluminum housings can be used for pressures up to bar ( psi). Steel housings must be used for operating pressures above bar ( psi). 7 Coil voltage and type - No coil D - V DC without diode D - V DC without diode - V DC with diode - V DC with diode 8 Connection type lank - No coil N - Deutsch male, DT-P, integrated G - DIN 65 W - Flying lead Y - Amp Jr (DC Only) Mating Connector: AMP 96- or equivalent D - MetriPackR 5 Male, Integrated (DC Only) Mating Connector: Delphi 56 See Section C for coil details. -5 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

53 ESVL9--E - Proportional solenoid valve 5 Port, -position, screw-in cartridge, proportional solenoid valve Up to L/min (6 USgpm) Up to 5 bar (6 psi) With Load Sense check valve Without Load Sense check valve Operation In the de-energized (center) position, all ports are blocked. When solenoid A is energized, flow is directed from port 5 to port and from port to port. Port is connected to system load sense line. When solenoid is energized, flow is directed from port 5 to port and from port to port. Port is connected to system load sense line. Features Integrated LS check feature in std. cavity Highly engineered components Compact design with low pressure drop Designed for optimized linearity and hysteresis IP69K ToughCoils compatible Optional manual override Industry standard cavity tool Profile view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure for all ports 5 bar (,6 psi) Cartridge fatigue pressure (infinite life) for all ports 5 bar (,6 psi) Coil Rated burst pressure 75 bar (,6 psi) per NFPA/T-6- R- Max. flow L/min (6 USgpm) Temperature range - to C (- to 8 F) Coil power 8 W* Coil A Recommended PWM and Dither frequency Cavity Hz C--5S Fluids All general purpose hydraulic fluids such as: MIL-H-566, SAE, SAE etc. Filtration Cleanliness code 8/6/ 5 Standard housing material Steel Weight including coils with check valve.5 KG Seal kit 996- (una-n), 996- (Viton ) Internal leakage 5 cm /min (5 in /min) bar ( psi) Viton is a registered trademark of E.I. DuPont. *AC coils must be used with a rectifying connector. Description The ESVL9 with E spool is a proportional 5 ported, three-position, direct acting, spool type solenoid valve with all ports closed in the de-energized position. This valve is ideal for moderate flow applications where an actuator needs to be controlled proportionally in both directions and stopped in any position. Pressure Drop - ar Pressure drop 8 6 Flow - LPM A - Port 5 to port - Port 5 to port A C D 8 6 Flow in LPM C - Port to port D - Port to port Flow vs. Current at bar P Coil Current in ma Coil A Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

54 ESVL9--F - Proportional solenoid valve 5 Port, -position, screw-in cartridge, proportional solenoid valve Up to L/min (6 USgpm) Up to 5 bar (6 psi) With Load Sense check valve Without Load Sense check valve Operation In the de-energized (center) position, port, port, and port are open to each other while port 5 is blocked. When solenoid A is energized, flow is directed from port 5 to port and from port to port. When solenoid is energized, flow is directed from port 5 to port and from port to port. Port is connected to system load sense line Features Integrated LS check feature in std. cavity Highly engineered components Compact design with low pressure drop Designed for optimized linearity and hysteresis IP69K ToughCoils compatible Optional manual override Industry standard cavity tool. Performance data Profile view Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure for all ports 5 bar (,6 psi) Cartridge fatigue pressure (infinite life) for all ports 5 bar (,6 psi) Rated burst pressure 75 bar (,6 psi) per NFPA/T-6- R- Coil Max. flow L/min (6 USgpm) Temperature range - to C (- to 8 F) Coil power 8 W* Recommended PWM and Dither frequency Hz Coil A Cavity Fluids C--5S All general purpose hydraulic fluids such as: MIL-H-566, SAE, SAE etc. Filtration Cleanliness code 8/6/ Standard housing material Steel 5 Weight including coils with check valve.5 KG Seal kit 996- (una-n), 996- (Viton ) Internal leakage 5 cm /min (5 in /min) bar ( psi) Viton is a registered trademark of E.I. DuPont. *AC coils must be used with a rectifying connector. Description The ESV9 with F spool is a proportional 5 ported, three position, direct acting, spool type solenoid valve. In the de-energized condition Port and are open to tank with the inlet port 5 blocked. This valve is ideal for moderate flow applications where an actuator needs to be moved in both directions and stopped in any position while allowing the service ports to decay to tank pressure in the de-energized condition. Pressure Drop - ar Pressure drop 8 6 A C D 8 6 Flow - LPM A - Port 5 to port - Port 5 to port Flow in LPM C - Port to port D - Port to port Flow vs. Current at bar P Coil Current in ma Coil A -5 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

55 ESVL9- - Proportional solenoid valve 5 Port, -position, screw-in cartridge, proportional solenoid valve Up to L/min (6 USgpm) Up to 5 bar (6 psi) Model code ESVL9 * * * *** **** * * ** * A Function ESVL9 - Proportional solenoid valve Spool center condition E F 9 Coil series lank - No coil L - L Series Large ToughCoils 8 W Size - size Coil special feature - None Seal material lank - una-n V - Viton 5 Manual override option - No manual override M - Manual override, push pull type For valve dimensions with manual override, see pages 87. Valve special features - None C - With valve check E 6 Housing material and ports Code Port size Housing number Aluminium Steel Cartridge only SG /8 SPP 69- See section J for housing details. F 7 Coil voltage and type - No coil D - V DC without diode D - V DC without diode - V DC with diode - V DC with diode 8 Connection type lank - No coil G - DIN 65-A Integrated N - Deutsch male, DT-P, Integrated D - Metric - Pack 5 male, Integrated F - Weather - Pack (packard) male, on wire leads W - Lead wire Y - AMP Junior, Integrated See Section C for coil details. (Only required if valve has special features omitted if.) Design code A - Design code These model digits are not stamped on the valve. Warning Aluminum housings can be used for pressures up to bar ( psi). Steel housings must be used for operating pressures above bar ( psi). Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

56 ESVL9- - Proportional solenoid valve 5 Port, -position, screw-in cartridge, proportional solenoid valve Up to L/min (6 USgpm) Up to 5 bar (6 psi) Dimensions mm (inch) Torque cartridge in aluminum housing 5- Nm (5. -. ft. lbs.) and - Nm (5. -. ft. lbs.) in a steel housing ESVL9- without MO n.8 [5.9] ESVL9- with MO n.8 [5.9] When solenoid valve is ordered without coils, it will be supplied with coil spacer and coil nut..7 [.6].7 [.6].6 [.7] 7.5 [.69] n5.8 [.] TORQUE 5-8 N.M [-6 lbf-ft].8 [.9].6 [.7].5 HEX A/F [.875] TORQUE N.M [-6 lbf-ft] n 5.9 [.8] n5.9 [.8] Spare parts Coil Nut for MO 688- Coil Nut without MO [5.6] 5. [5.7] Coil Spacer HEX A/F [.] Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. 8.9 [.] 78.7 [.] HEX A/F [5.] 7/8- UNF A 8.9 [.] 78.7 [.] 7/8- UNF A n. -. [ ] "LS/" n. -. [ ] "LS/" -56 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

57 Sectional view (out) (in) Description This is a compact ported proportional, pressure compensated, spool type flow regulator. Ideal for speed regulation of actuators in many applications. Operation In the de-energized condition the valve is closed. As current is applied to the coil the valve opens proportionally allowing flow from port to port. Performance data PFRA - Proportional valve Proportional bi-directional, normally closed poppet 8 L/min at 75% bar ( psi) Features High flow capacity with reduced space requirements. Standard valve bodies and common cavities. One-piece encapsulated coil with minimal amperage draw. Oil immersed armature solenoid. Various coil terminals and voltages. Coil interchangeability with valves of same series. Manual override, seal variations and other options available. Sealed coil arrangement to protect stem from corrosion. Reversible coil without affecting performance. Ratings and specifications Performance data is typical with fluid at cst (5 SUS) Max inlet pressure bar ( psi) Rated flow 8 %, 85%, 8 L/min@ 75% Hystersis 8% maximum without PWM, % maximum with PWM Frequency Hz to Hz - recommended Dead band 5-5% of rated current Response time ms Internal leakage Up to ml/min, bar differential Temperature range - to C (- to 8 F) Cavity A67 (see section M) Electrical data See coil data sheet Torque cartridge into cavity Nm ( lbs ft) Mounting position Unrestricted All general purpose hydraulics fluids such as: MIL-H-566, SAE Fluids, SAE, etc Seal Material Standard nitrile with PTFE back up rings Filtration S55/ Class 6/ (5 micron or better) Nominal viscosity range 5 to 5 cst Standard housing materials Aluminium alloy Coil Weight. kg (.6 lbs) Weight. kg (. lbs) Seal kit SK8 (Nitrile) SK8V (Viton ) Viton is a registered trademark of E.I. DuPont Pressure drop curves Pressure differential - bar Pressure - psi Flow - US gpm Pressure - bar Flow - litres/min % rated amps Flow US gpm Flow - US gpm % of rated amps 5 75% of rated amps 5 5% of rated amps Pressure - psi Flow - l/min Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

58 PFRA - Proportional Valve Proportional bi-directional, normally closed poppet 8 L/min at 75% bar ( psi) Model code PFR A N 6 H W Function PFR A - Cartridge only Seal material N - Nitrile V - Viton Manual override 6 - Screw Coil termination H - DIN65 F - Flying Lead DM - Deutsch moulded Other terminations available on request. 5 Voltage - VDC - VDC Port size Code Port size Housing number Aluminium Cartridge only W /" SP A59 W /8" SP A75 6T /8" SAE A955 See section J for housing details. Dimensions mm (inch) Cartridge only Installation drawing 7. (.8) 9. (.9). (.8) 5. A/F. A/F 5.5 (.) 5. (.97) 9. (.6) 5. (.97) holes Ø6.8 (.7) thro 6. (.6). (.87) 6. (.) 6. (.) 9. (.75).8 (.5) 5.9 (.6).8 (.5) 5.8 (.. A/F 7.8 (.9) 6.9 (.66) / -6-UNF-A Ø5.8 (.6) -58 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

59 EFV--C - Proportional valve Proportional flow, normally closed spool Up to L/min ( USgpm) bar ( psi) Operation Current supplied to the coil controls the valve. At zero current, the valve is fully closed from port to port. At 5 to 6 ma (V coil) the valve is fully open. The valve will regulate flow out of port regardless of downstream system pressure. As current is increased to the solenoid the flow out of port will increase. Features Hardened and ground working parts to give long life with good control; Compact design with low pressure drop.ip69k Tough coil compatibility, continuously rated. Performance data Sectional view Description This is a three port pressure compensated proportional normally closed flow control screw in cartridge valve. The valve can be used as a priority or a restrictive style valve allowing the valve to control the outlet flow with the option of the excess flow being used for another system. Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure bar ( psi) Cartridge endurance rating million cycles Cartridge fatigue pressure (infinite life) bar ( psi) NFPA rated Rated flow A Spool-max regulated flow (by-pass mode): 57 L/min (5 USgpm) max regulated flow ( port mode): 5 L/min ( USgpm) max input flow (input flow): L/min ( USgpm) Spool-max regulated flow (by-pass mode): 8 L/min ( USgpm) max regulated flow ( port mode): L/min (8 USgpm) max input flow (input flow): L/min ( USgpm) Note: Max regulated flow may decrease slightly during compensation. Internal leakage (fully closed) cm /min (5 in PSID Nominal supply voltage / V Current to fully open valve 6 6 ma (V coil), 8 6 ma (V coil) Current to fully close valve 5 6 ma (V coil), ma (V coil) Recommended PWM frequency - Hz Coil resistance.7v V/V, 9. V/V Cartridge only,7 kg (.8 lb), cartridge with coil and end nut,7 kg Mass (.6 lb) Temperature range - to 9 C (- to 9 F) Maximum oil temperature C (8 F) Maximum internal coil temperature C (9 F) Cavity C-- All general purpose hydraulics fluids such as: MIL-H-566, SAE, SAE Fluids, DTE, etc. Filtration Cleanliness code 8/6/ Housing material (standard) Aluminum or steel Hysterisis.5 USgpm with Hz PWM driver Seal kit 997- (una-n), 997- (Viton ) Viton is a registered trademark of E.I. DuPont Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

60 EFV--C - Proportional valve Up to L/min ( USgpm) bar ( psi) Performance Curves Flow is Pressure drop Flow vs Pressure drop Excess flow P to P (P to Atm) Full current (7 ma on a V Coil) Pressure Drop psi Flow-US gpm 5 Flow vs Pressure drop Regulated flow P to P (P to Atm) Full current (7 ma on a V Coil) Pressure Drop - psi A 7.5. Flow-US gpm Flow vs Current A - A spool pressure drop - spool pressure drop Flow (GPM) 8 6 y-pass Mode 8 6 A Port Mode Current (ma) Port Mode y-pass Mode A - A spool - spool Regulated flow vs Pressure Regular to ypass Flow-US gpm. 7.5 G 5..5 E F. D C.5. A Pressure - psi A -. AMPS -.6 AMPS C -.9 AMPS D -. AMPS E -.5 AMPS F -.8 AMPS G -. AMPS Regulated flow vs Pressure ypass to Regular Flow-US gpm. 7.5 G 5. F.5 E. 7.5 D 5. C.5. A Pressure - psi A -. AMPS -.6 AMPS C -.9 AMPS D -. AMPS E -.5 AMPS F -.8 AMPS G -. AMPS Note: Pressure Compensation curves are shown for spool valves. -6 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

61 EFV--C - Proportional valve Proportional flow, normally closed spool Up to L/min ( USgpm) bar ( psi) Model code EFV * C * * * *** *****E** Function EFV - Electro proportional flow control valve Size - size Manual override option - No core tube special features S - Screw-in 8 Port Size 7 Valve housing material - Cartridge only A - Aluminum S - Steel Coil series E - E series coils * These model digits will not be stamped on the valve. For coil part numbers and dimensions see section C. Seal material N - una-n V - Viton Code Port size Housing number Aluminium single Steel single Cartridge only G /" SPP Special features - None Only required when valve has special features, omitted if. Logic C - Normally closed 6G /" SPP T SAE T SAE Flow rating A PSID - 8 PSID Note: oth the manifold and port plug are required. See section J for housing details. See specifications Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

62 EFV--C - Proportional Valve Proportional flow, normally closed spool Up to L/min ( USgpm) bar ( psi) Dimensions mm (inch) Torque cartridge in housing S Nm (-9 ft lbs) A - 8- Nm (8-9 ft lbs) Note: EFV- with DIN-65 connector shown. Cartridge only, (.7),8 (.9) 9, (.75).6 86, (.) 6, (.5) 68,6 (.7) Installation drawing (Aluminum) 5. (.) (.6).7 (.5) 5. (.) 8.7 (.) 8 (.5) 8.55 (.5) 5.6 (.).5 (.75) 76. (.) 88.9 (.5) -6 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

63 EFV--O - Proportional valve Proportional flow, normally open spool Up to L/min ( USgpm) bar ( psi) Operation Current supplied to the coil controls the valve. At zero current, the valve is fully open from port to port. At 6 ma (V coil) the valve is fully closed. The valve will regulate flow out of port regardless of downstream system pressure. As current is increased to the solenoid the flow out of port will decrease. Features Hardened and ground working parts to give long life with good control; Compact design with low pressure drop.ip69k Tough coil compatibility, continuously rated. Performance data Profile view Description This is a three port pressure compensated normally open proportional flow control screw in cartridge valve. The valve can be used as a priority or a restrictive style valve allowing the valve to control the outlet flow with the option of the excess flow being used for another system. Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure bar ( psi) Cartridge endurance rating million cycles Cartridge fatigue pressure (infinite life) bar ( psi) NFPA rated A Spool-max regulated flow (by-pass mode): 5 L/min ( USgpm) max regulated flow ( port mode): L/min ( USgpm) max input flow (input flow): L/min ( USgpm) Spool-max regulated flow (by-pass mode): 8 L/min ( USgpm) max regulated flow ( port mode): L/min (8 USgpm) max input flow (input flow): L/min ( USgpm) Rated flow Note: Max regulated flow may decrease slightly during compensation. Internal leakage (fully closed) 77-8 cm /min (5- in PSID Nominal supply voltage / V Current to fully open valve 5 6 ma (V coil), 8 6 ma (V coil) Current to fully close valve 6 6 ma (V coil), 8 6 ma (V coil) Recommended PWM frequency - Hz Coil resistance.7v V/V, 9. V/V Cartridge only,7 kg (.8 lb), cartridge with coil and end nut,7 kg Mass (.6 lb) Temperature range - to 9 C (- to 9 F) Maximum oil temperature C (8 F) Maximum internal coil temperature C (9 F) Cavity C-- All general purpose hydraulics fluids such as: MIL-H-566, SAE, SAE Fluids, DTE, etc. Filtration Cleanliness code 8/6/ Housing material (standard) Aluminum or steel Hysterisis.5 USgpm with Hz PWM driver Seal kit 997- (una-n), 997- (Viton ) Viton is a registered trademark of E.I. DuPont. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

64 EFV--O - Proportional valve Up to L/min ( USgpm) bar ( psi) Performance Curves Pressure drop port to port Pressure drop port to port Pressure Drop (PSI) GPM 5 Pressure Drop (PSI) GPM 7.5 A..5 Flow vs Current - A Spool Flow (GPM) y-pass Mode Port Mode Flow vs Current - Spool 6 Flow (GPM) 8 6 y-pass Mode Port Mode Current (Milli-amps) Current (Milli-amps) Parameters: Hz PWM Regulated flow vs Pressure Port Pressure > Port Pressure Regulated flow vs Pressure Port Pressure > Port Pressure GPM 5..5 A. 7.5 C 5. D.5. E F A amps. amps C.6 amps D.9 amps E. amps F.5 amps 5 PSI GPM 5..5 A. 7.5 C 5. D.5 E. F A amps. amps C.6 amps D.9 amps E. amps F.5 amps 5 PSI Note: Pressure Compensation curves are shown for spool valves. -6 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

65 EFV--O - Proportional valve Proportional flow, normally open spool Up to L/min ( USgpm) bar ( psi) Model code EFV * * * * *** *****E** Function EFV - Electro proportional flow control valve Size - size 6 Manual override option - No core tube special features S - Screw-in 7 Valve housing material - Cartridge only A - Aluminum S - Steel 9 Coil series E - E series coils * These model digits will not be stamped on the valve. For coil part numbers and dimensions see section C. Seal material N - una-n V - Viton 8 Port size Code Port size Housing number Aluminium single Cartridge only Steel single Special features - None Only required when valve has special features, omitted if. Logic - Normally open G /" SPP G /" SPP T SAE T SAE Flow rating A - 8 PSID - 8 PSID Note: oth the manifold and port plug are required. See section J for housing details. See specifications Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

66 EFV--O - Proportional valve Proportional flow, normally open spool Up to L/min ( USgpm) bar ( psi) Dimensions mm (inch) Torque cartridge in housing S Nm (-9 ft lbs) A - 8- Nm (8-9 ft lbs) Note: EFV- with DIN-65 connector shown. Cartridge only, (.7),8 (.9) 9, (.75).6 86, (.) 6, (.5) 68,6 (.7) Installation drawing (Aluminum) 5. (.) (.6).7 (.5) 5. (.) 8.7 (.) 8 (.5) 8.55 (.5) 5.6 (.).5 (.75) 76. (.) 88.9 (.5) -66 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

67 Sectional view Description This is a proportional poppet style pilot relief cartridge. The pressure setting is directly proportional to changes in DC current input. The valve is ideal for the control of larger valves for the control of a pressure within a system. Operation The poppet is held on the seat by a light spring. The force is increased by the application of magnetic force due to the increase in current. This increases the pressure required to lift the poppet of the seat thus controlling the pressure. Performance data Features High flow capacity with reduced space requirements. No dynamic seals. Standard valve bodies and common cavities. One-piece encapsulated coil with minimal amperage draw. PDRA - Proportional valve Proportional relief.5 L/min (. USgpm) 5 bar (5 psi) Oil immersed armature solenoid. Various coil terminals and voltages. Coil interchangeability with valves of same series. Manual override, seal variations and other options available. Sealed coil arrangement to protect stem from corrosion Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Max inlet pressure 5 bar (5 psi) = 5-7 bar (7-55 psi), = - bar (- psi), Pressure range 5 = -5 bar (-5 psi) Max press port bar (5 psi) Max flow.5 L/min (. US GPM) Hystersis <.5% without PWM Dead band % approx Response time = -9 ms, = -95 ms, 5 = -58 ms Internal leakage <5 ml/min Temperature range - to C (- to 8 F) Cavity A879 (see Section M) Electrical data See coil data sheet Torque cartridge into cavity Nm (9.5 lbs ft) For best results mount below reservoir oil level. Mounting position If this is not feasible mount horizontally All general purpose hydraulics fluids such as: MIL-H-566, SAE, Fluids SAE, etc Seal material Standard nitrile with PTFE back up rings Filtration S55/ Class 8/ (5 micron or better) Nominal viscosity range 5 to 5 cst Standard housing materials Aluminium Coil Model Code C6-*-*/9 Coil Weight. kg (.6 lbs) Weight.5 kg (.55 lbs) Voltage available / VDC Seal kit SK9 (Nitrile) SK9V (Viton ) Performance curves Flow - L/min Pressure - psi bar - bar... Flow - US gpm 5-7 bar Viton is a registered trademark of E.I. DuPont. Pressure - bar 7.5 Pressure - psi 5-5 bar 5-7 bar - bar % of rated current Pressure - bar Pressure - psi Flow - L/min bar - bar -5 bar 75% 5% 5% 75% 5% 5%... Flow - US gpm 5% 5%. 8 7 Pressure - bar Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

68 PDRA - Proportional valve Proportional relief.5 L/min (. USgpm) 5 bar (5 psi) Model code PDRA N 6 H W Function PDRA - Normally open Seal material N - Nitrile V - Viton Pressure range - 5 to bar - to bar 5 Coil termination H - DIN65 F - Flying Lead DM - Deutsch moulded Other terminations available on request. 6 Voltage - VDC - VDC 7 Port size Code Port size Housing number Aluminum Steel Cartridge only W /" SP A85 A8 W /8" SP A A75 T /" SAE A8-6T /8" SAE A5676 A8 Manual override 6 - Screw Dimensions mm (inch) Cartridge only Installation drawing. (.8) 9. (.9) 5. A/F Man override. A/F Man override locknut 5.5 (.).7 (.5) 8.8 (.). (.98). A/F 5. (.97) 6. (.6). (.). (.7) 5. (.97) (.76) (.) holes Ø6.8 (.7) through 5.9 (.6).8 (.5) 9. (.) / -6 UNF 9. (.76) T() Ø.6 (.5) P() -68 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

69 IRV- - Proportional valve Proportional inverse relief, poppet L/min (.5 USgpm) bar ( psi) Operation The IRV- proportional relief is spring biased closed to the highest setting. Increasing current to the coil will proportionally decrease the pressure setting. When the pressure at port (inlet) is enough to overcome the spring force, the poppet lifts and allows flow from port to port (outlet). Features Hardened and ground components for accurate consistent control and a long life. IP69K Tough coil compatibility continuously rated. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure bar ( psi) Cartridge endurance rating million cycles Cartridge fatigue pressure rating (NFPA/T.6. R-) bar ( psi) Maximum pressure setting range 5- bar ( psi) Rated flow L/min, (.5 USgpm) Nominal supply voltage / V Temperature range - to 9 C (- to 9 F) Maximum oil temperature C (8 F) Maximum internal oil temperature C (9 F) Cavity C-- All general purpose hydraulic fluids such as: MIL-H-566, SAE, Fluids SAE, etc. Filtration Cleanliness code 8/6/ Housing material (standard) Aluminum Hysterisis psi with dither Weight cartridge only, kg (. lbs) Seal kit 5658 (una-n), (Viton ) Viton is a registered trademark of E.I. DuPont Endurance tested to million cycles at full rated flow and pressure. Description This is a proportionally controlled inverse pilot poppet relief valve. Ideal for use with logic elements to control fan or brush pressure where full speed or force is required under electrical failure. Pressure drop Pressure (psi) Metering Performance 6 A C 6 D 6 E Pressure (bar) Amps Pressure Differential A - 5 psi - psi C - psi D - psi E - 5 psi Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

70 IRV- - Proportional valve Proportional inverse relief, poppet L/min (.5 USgpm) bar ( psi) Model code IRV * ** * ** *** * * * * ** Function IRV - Inverse proportional relief Size - size Seal material lank - una-n V - Viton Factory set pressure User requested in psi increments. Max pressure setting range 5 - psi Example 5-5 psi - psi 5 Housing material lank - Cartridge only A - Aluminum Port size 9 Connector type Code Port size Housing number lank - No coil G - ISO DIN 65 Aluminum single Aluminum single Q - Spade Terminals Light duty Fatigue rated W - Flying Lead 6T 8T Cartridge only SAE 6 SAE N - Deutsch (DC only) Y - Amp JR (DC only) P - Conduit For coil part numbers and dimensions G G /" SPP /8" SPP see section C. 6H 8H SAE 6 SAE Coil series lank - No coil J - J Series, W See section J for housing details. For coil part numbers and dimensions see section C. 7 Coil voltage - No coil - VDC - VDC - VDC 8 Type of power lank - No coil D - DC w/o diode - DC with diode Coil special features lank - No coil - No special feature Valve special features lank - No coil Dimensions mm (inch) Cartridge only Installation drawing 9, HEX (.75) 7. (.85) 5. (.) 7, (.85) X 7. (.8) 6.5 (.5).8 (.8), (.) 5, HEX (.),875 - THD.,6 (.6) 9.5 (.7) 6.5 (.5) 9. (.75) Ø 5,8 (.6) Ø 8,9 (.5) -7 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

71 IRV- - Proportional valve Proportional inverse relief, Spool 57 L/min (5 USgpm) bar (5 psi) Operation The IRV- proportional relief is spring biased closed to highest setting. Increasing current to the coil will proportionally decrease the pressure setting. This valve remains closed between port and until the predetermined pressure setting has been reached at port, overcoming the spring force and opening the spool to allow flow from port to. Features Hardened and ground components for accurate consistent control and a long life. Pilot style to give accurate pressure control over varying flows. IP9K Tough coil compatibility continuously rated. Profile view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) bar (5 psi) Cartridge fatigue pressure (infinite life) bar (5 psi) Maximum pressure setting range 5 bar to bar (5 to 5 psi) Rated Flow 57 lpm ( 5 US gpm) Nominal supply voltage / V Cavity C-- Internal leakage, port to port cm /min. (7 in bar Standard housing material Aluminum or steel Fluids All general purpose hydraulic fluids such as: MIL-H-566, SAE, SAE etc Filtration Cleanliness code 8/6/ Temperature range -º to º C (-º to 8º F) Hysterisis psi with dither Weight cartridge only. kg (. ibs) Seal Kit 5658 (una-n), 5686 (Viton ) Viton is a registered trademark of E.I. DuPont. Endurance tested to million cycles at full rated flow and pressure. Description This is a inverse proportionally controlled spool type two stage relief valve. Ideal for use to control the fan drive or brush pressure where full speed or force is required under electrical failure. Pressure drop Pressure (psi) Metering Performance 6 A C 6 D 6 E Pressure (bar) Amps Pressure Differential A - 5 psi - psi C - psi D - psi E - 5 psi Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

72 IRV- - Proportional valve Proportional inverse relief, Spool 57 L/min (5 USgpm) bar (5 psi) Model code IRV * ** * ** *** * * * * ** Function IRV - Inverse proportional relief Size - size Seal material lank - una-n V - Viton Factory set pressure User requested in psi increments. Max pressure setting range 5 - psi Example 5-5 psi - psi 5 Housing material lank - Cartridge only A - Aluminum Port size 9 Connector type Code Port size Housing number lank - No coil G - ISO DIN 65 Aluminum Single Aluminum Single Q - Spade Terminals Light duty Fatigue rated W - Flying Lead 6T 8T Cartridge only SAE 6 SAE N - Deutsch (DC only) Y - Amp JR (DC only) P - Conduit For coil part numbers and G G /" SPP /8" SPP dimensions see section C. 6H 8H SAE 6 SAE Coil series lank - No coil J - J Series, W See section J for housing details. For coil part numbers and dimensions see section C. 7 Coil voltage - No coil - VDC - VDC - VDC 8 Type of power lank - No coil D - DC w/o diode - DC with diode Coil special features lank - No coil - No special feature Valve special features lank - No coil Dimensions mm (inch) Cartridge only Cartridge Only 9, HEX (.75) Installation drawing 7. (.85) 5. (.) 7, (.85) X 7. (.8) 6.5 (.5).8 (.8), (.) 5, HEX (.),875 - THD.,6 (.6) 9.5 (.7) 6.5 (.5) 9. (.75) Ø 5,8 (.6) Ø 8,9 (.5) -7 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

73 Sectional view Operation This valve remains closed between port and until the predetermined pressure setting has been reached Performance data Ratings and specifications ERV- - Proportional valve Proportional relief, spool.8-6. L/min ( - 5 USgpm) bar (5 psi) at port, overcoming the electrical force and opening the spool to allow flow from port to port. Features Hardened and ground components for accurate consistent control and a long life. Pilot style to give accurate pressure control over varying flows. IP69K Tough coil compatibility continuously rated. Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) - bar (-5 psi) Cartridge fatigue pressure (infinite life) bar (5 psi) Rated flow.8-6, L/min (-5 USgpm) Temperature range - to C (- to 8 F) Cavity C-- All general purpose hydraulic fluids such as: MIL-H-566, SAE, Fluids SAE etc. Filtration Cleanliness code 8/6/ Housing material (standard) Aluminum Weight including coil, kg (.98 lbs) Seal kit 5658 (una-n), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a proportional internally pilot operated screw in cartridge relief valve. Good control over large flows for the physical size of the cartridge. Ideal for the control of pressure under varying flow conditions. Pressure Drop - psi Pressure Pressure drop curves Pressure override, energized Performance curves Cartridges only bar 7 Flow - L/min (,8 cst 9 C) psi 5 Step response Zero outlet pressure Volts Flow - USgpm (5 SUS F) 5 Inputvoltage Pressure Drop - bar Pressure override, de-energized Pressure Drop - psi Pressure - psi 5 Flow - L/min (,8 cst 9 C) Flow - USgpm (5 SUS F) Pressure gain Pressure Drop - bar Pressure - bar.... seconds Response tim e 6 9volts Input 5 C (77 F) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

74 ERV- - Proportional valve Proportional relief, spool.8 L/min (6 USgpm) bar (5 psi) Model code ERV (V) ** ** *** * Function ERV - Proportional relief valve Size - size Seal material lank - una-n V - Viton Maximum pressure Customer to specify settings in increments of 7 bar ( psi) and coded in hundreds of psi within the 5- bar range (5- psi) range. Example: 5-5, (5 psi) Port size Code 6T G G 6H Port size Cartridge only SAE 6 /" SPP /8" SPP SAE 6 Housing number Aluminum single 5665* 8767* Connector types lank - No coil G - DIN 65 Q - Spade Terminals W - Flying Lead N - Deutsch Y - Amp JR For coil part numbers and dimensions see section C. 8H *Light duty housing. SAE Special features - None See section J for housing details. 6 Voltage rating - No coil D - VDC D - VDC - VDC/w diode* - VDC/w diode* *Optional arc suppression diode. Note: This valve uses the standard J series coils, see section C for coil part numbers and specifications. Only required if valve has special features, omitted if. Dimensions mm (inch) Torque cartridge in aluminum housing 7-5 Nm (5- ft lbs). Cartridge only Valve is shown with W coil. Installation drawing 9,6 (.6) 7. (.87) 5. (.) Ø 8,9 (.5) 9, (.75) Hex X 7. (.8) 6.5 (.5).8 (.8) 7, (.87) 5, (.) Hex 9.5 (.7) 6.5 (.5) 9. (.75), (.).875"- Thd. Ø 5,8 (.6) Warning Maintain 5-8 Nm(-6 ft lbs) maximum torque on valve tube nut.over tightening may cause valve failure. -7 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

75 ERV-6 - Proportional valve Proportional relief, spool Up to L/min (5 USgpm) bar ( psi) Sectional view Operation This valve remains closed between port and until the predetermined pressure setting has been reached Performance data Ratings and specifications at port, overcoming the electrical force and opening the spool to allow flow from port to port. Features Hardened and ground components for accurate consistent control and a long life. Pilot style to give accurate pressure control over varying flows. IP69K Tough coil compatibility continuously rated. Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports),5- bar (5- psi) Cartridge fatigue pressure (infinite life) bar ( psi) Rated flow 7,6-, L/min (-5 USgpm) Temperature range - to C (- to 8 F) Cavity C-6- All general purpose hydraulic fluids such as: MIL-H-566, SAE, Fluids SAE etc. Filtration Cleanliness code 8/6/ Housing material (standard) Aluminum Weight including coil, kg (.98 lbs) Seal kit 5658 (una-n), (Viton ) Viton is a registered trademark of E.I. DuPont Pressure drop curves Pressure override, energized Flow - L/min (,8 cst 9 C) Pressure override, de-energized Flow - L/min (,8 cst 9 C) Description This is a proportional internally pilot operated screw in cartridge relief valve. Good control over large flows for the physical size of the cartridge. Ideal for the control of pressure under varying flow conditions. Pressure - psi 7 5 Flow - USgpm (5 SUS F) Pressure - bar Pressure - psi 6 5 Flow - USgpm (5 SUS F) Pressure - bar Performance curves Cartridges only Zero outlet pressure bar psi Step response Volts 6 Pressure gain 8 Pressure Inputvoltage Pressure -psi 7 Pressure -bar.... seconds 6 9 volts Response tim e 5 C (77 F) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

76 ERV-6 - Proportional valve Proportional relief, spool Up to L/min (5 USgpm) bar ( psi) Model code ERV 6 (V) ** *** *** * Function ERV - Proportional relief valve Size 6-6 size Seal material lank - una-n V - Viton Maximum pressure Customer to specify settings in increments of 7 bar ( psi) and coded in hundreds of psi within the 5- bar range (5- psi) range. Example: 5-5, (5 psi) Port size Code T G 6G H Port size Cartridge only SAE /" SPP /" SPP SAE Housing number Aluminum single 5669* 87676* Connector types lank - No coil G - DIN 65 Q - Spade Terminals W - Flying Lead N - Deutsch Y - Amp JR For coil part numbers and dimensions see section C. H *Light duty housing. SAE Special features - None See section J for housing details. Only required if valve has special features, omitted if. 6 Voltage rating - No coil D - VDC D - VDC - VDC/w diode* - VDC/w diode* *Optional arc suppression diode. Note: This valve uses the standard J series coils, see section C for coil part numbers and specifications. Dimensions mm (inch) Cartridge only Torque cartridge in aluminum housing 8- Nm (8-9 ft lbs). Installation drawing 9,6 (.6) 77.9 (.7).8 (.5) Ø 8,9 (.5) 9, (.75) Hex Torque to 5-8 Nm 88.9 (.5) X 8.7 (.) 8. (.) 79, (.). (.) 68.8 (.688) 88.9 (.5) 8, (.5) Hex, (.75)."- Thd. Ø 8,55 (.) Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. -76 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

77 Sectional view (Tank) (Pres) (Reg) Description This is a low pressure proportional direct acting pressure reducing valve with a reverse relief screw in cartridge valve. It is ideal for the control of compensators on a pump or brake and clutch systems on a transmission circuit. Operation In the de-energized position, pressure inlet port is open to reduced pressure port, return port is closed. As electrical current is increased, the setting of the valve increases allowing pressure at port to increase. If the pressure at port exceeds the setting of the valve, the spool will shift further and relieve to port. Performance data Ratings and specifications Features High flow capacity with reduced space requirements. No dynamic seals. Standard valve bodies and common cavities. One-piece encapsulated coil with minimal amperage draw. Oil immersed armature solenoid. PPDA - Proportional valve Proportional reducing/relief, spool L/min (5. USgpm) bar ( psi) Various coil terminals and voltages. Coil interchangeability with valves of same series. Manual override, seal variations and other options available. Sealed coil arrangement to protect stem from corrosion. Performance data is typical with fluid at cst (5 SUS) Max inlet pressure bar ( psi) Max regulated pressure 9 watt coil bar, 9 watt coil 8 bar 8.6 L/min (5 USgpm) 9 watt coil Max flow L/min (5. USgpm) 9 watt coil Hystersis 6% max without PWM Frequency Hz Dead band 9% approx Response time = -9 ms, = -95 ms, 5 = -58 ms Internal leakage Up to 5 ml/min at bar differential Temperature range - to C (- to 8 F) Cavity A5 (see Section M) Torque cartridge into cavity Nm ( lbs ft) Mounting position Unrestricted All general purpose hydraulics fluids such as: MIL-H-566, SAE Fluids, SAE, etc Seal material Standard nitrile with PTFE back up rings Filtration S55/ Class 8/ (5 micron or better) Nominal viscosity range 5 to 5 cst Standard housing materials Aluminium Coil weight. kg (.6 lbs) Weight cartridge only.5 kg (.55 lbs) Seal kit SK9 (Nitrile) SK9V (Viton ) Coil part number C6*-*/9 (PPDA) C6-*-*/9 (PPDH) Voltage available, VDC Viton is a registered trademark of E.I. DuPont Pressure Drop Flow - L/min Pressure - psi Flow - US gpm Pressure - bar Performance curve 6 5 Pressure - psi 88 PPD AH 6 PPD A % of rated current Pressure - bar Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

78 PPDA - Proportional valve Proportional Reducing/Relief, Spool L/min (5. USgpm) bar ( psi) Model code PPDA N H 6 W Function PPDA - Standard PPDH - Heavy duty Seal material N - Nitrile V - Viton Coil termination H - DIN65 F - Flying Lead DM - Deutsch moulded Other terminations available on request. Manual override 6 - Screw Type Manual Override Port size Code Port size Housing number Aluminum single Cartridge only W /" SP A77 W /8" SP A668 6T /8" SAE 656 See section J for housing details. 5 Voltage - VDC - VDC Dimensions mm (inch) Cartridge only 9. (.9) Installation drawing 57. (.5). (.8) 7. (.8) 5.5 (.) holes Ø7. (.8) thro 8. (.). (.).7 (.58) 9. (.6) 5. (.97) 8.6 (.) 8. (.5).7 (.5).8 (.9) 7.6 (.87) 5. (.). A/F 9.8 (.57) / -6-UNF-A (Tank) (Pressure) 6.9 (.67) Ø. (.56) Ø5.8 (.6) (Regulated) -78 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

79 Sectional view (RP) (T) (P) Description This is a low pressure proportional direct acting pressure reducing valve with a reverse relief screw in cartridge valve. It is ideal for the control of compensators on a pump or brake and clutch systems on a transmission circuit. Operation In the de-energized position, pressure inlet port is closed and reduced pressure port is open to return port. As electrical current is increased, port opens to port and port closes, proportionally increasing pressure at port. If the pressure at port exceeds the setting of the valve, the spool will shift further and relieve to port. EPRV-8 - Proportional valve Proportional reducing/relief, spool 7.6 L/min ( USgpm) 5 bar (5 psi) Features Hardened and ground components for accurate consistent control and a long life. IP69K Tough coil compatibility continuously rated. Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Maximum inlet pressure 5 bar (5 psi) Cartridge fatigue pressure (infinite life) 5 bar (5 psi) Reduced pressure range - bar (- psi) Maximum operating flow 7,6 L/min ( USgpm) Temperature range - to C (- to 8 F) Cavity C-8- Fluids All general purpose hydraulic fluids such as: MIL-H-566, SAE, SAE etc. Filtration Cleanliness code 8/6/ Recommended PWM frequency 5 Hz 5 Hz PWM 5% Housing material (standard) Aluminum Weight including coil,9 kg (.6 lbs) Seal kit -795 (una-n), -795 (Viton ) Viton is a registered trademark of E.I. DuPont Pressure drop curves Flow - L/min (,8 cst 9 C) Flow - L/min (,8 cst 9 C) Relieving mode Reducing mode Pressure drop - psi A Flow - USgpm (5 SUS F) A - Port to port - Port to port 6 Pressure drop - bar Pressure - psi Flow - USgpm (5 SUS F) 8 7 Pressure - bar Performance curves Reduced pressure bar 8 psi 6 Step response.... Time - sec ( VDC)..8. Amperage Amperage decreasing Amperage increasing Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January Reduced pressure - psi Regulated pressure vs amperage ( VDC) Reduced pressure - bar ( VDC)

80 EPRV-8 - Proportional valve Proportional reducing/relief, spool 7.6 L/min ( USgpm) 5 bar (5 psi) Model code EPRV 8 (V) (A) ** *** * * Function EPRV - Proportional reducing/relieving valve Size 8-8 size Seal material lank - una-n V - Viton Port size 7 Connector types Code Port size Housing number Aluminum single lank - No coil G - DIN 65 Q - Spade Terminals Cartridge only W - Flying Lead N - Deutsch T SAE -67 Y - Amp JR 6T G SAE 6 /" SPP For coil part numbers and dimensions see section C. G /8" SPP -67 See section J for housing details Coil S - S series coils Valve housing material Omit for cartridge only A - Aluminum 6 Voltage rating - No coil D - VDC D - VDC - VDC/w diode* - VDC/w diode* *Optional arc suppression diode. Note: This valve uses the standard S series coils, see section C for coil part numbers and specifications. 9 Special features - None Only required if valve has special features, omitted if. Dimensions mm (inch) Torque cartridge in aluminum or steel housing - Nm (5- ft lbs) Cartridge only Valve is shown with N coil. 6, (. ) Installation drawing 9. (.75) 5. (.) 9. (.75),8 (.5 ) 5.5 (.6) 67. (.65). (.) 56.7 (.) 6.5 (.5) X7. (.8) 9.8 (.7) Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut.over tightening may cause valve failure. -8 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

81 Profile view Operation In the de-energized position, pressure inlet port is closed and reduced pressure port is open to return port. As electrical current is increased, port opens to port and port closes, proportionally increasing pressure at port. Performance data Pressure Drop drop Curves curves If the pressure at port exceeds the setting of the valve, the spool will shift further and relieve to port. Features Compact design allows for more flexible machine design Ratings and Specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Maximum inlet pressure, A() and P() Maximum inlet pressure, Tank () EPPV5 - Proportional Valve Proportional pressure reducing valve 8. L/min (. USgpm) 5 bar (75 psi) Excellent repeatability, hysteresis and resolution due to bearing design Quality standard reduces maintenance and downtime costs 5 bar (75 psi) bar (5 psi) In accordance with control pressure range in model code 8. L/min ( USgpm) - to 5 C (- to F) TC65 Reduced pressure range Maximum operating flow Temperature range Cavity Fluids Mineral oil according to DIN 55 Filtration Cleanliness code /8/5 Recommended PWM frequency Hz Hz PWM Resistance Current Protection class <.7 bar (pa = ) <. bar (pa = 5) <.5 bar (pa = 5).7 ohms +/-5% for V.8 ohms +/-5% for V 5 ma for V 75 ma for V Up to IP6K6 / IPX9K Description This is a low pressure proportional direct acting pressure reducing cartridge valve. It is ideal for the control of compensators on a pump or brake, proportional valve spool and clutch systems on a transmission circuit. Port A to T Pressure drop bar 5 bar 5 bar 5 bar flow (l/min) bar Port P to A 5 bar 5 bar 5 bar flow (l/min) Performance curves Regulated pressure vs. amperage p A -p t [bar] P A (I ) p A (I ) *9% P A (I ) *% P A (I=) 5ms electrical signal 5ms time Reduced pressure bar bar 5 bar bar drawings. We reserve the right to change specifications without notice. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

82 EPPV5 - Proportional Valve Proportional pressure reducing valve/relief, spool 8. L/min (. USgpm) 5 bar (75 psi) Model code EPPV5 H ** ** D D Function EPPV5 - Proportional pressure reducing valve Control pressure - bar (9 psi) 5-5 bar (6 psi) - bar (6 psi) 6 Voltage Rating - V - V Seal material H - una-hnr 5 Port size 7 Voltage type D - DC Manual override ption - Manual override not available Code Port size Cartridge only 8 Connector type N - Deutsch DT-P 9 Special features - None Cartridge only Dimensions (mm) (ø9.6) (8.5) (.5) (.5) (9) (.) A P T (ø9.) (ø.5 (x)) (95) -8 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

83 Profile view Description This is a low pressure proportional direct acting pressure reducing cartridge valve with manual override available. It is ideal for the control of compensators on a pump or brake and clutch systems on a transmission circuit. Operation In the de-energized position, pressure inlet port is closed and reduced pressure port is open to return port. As electrical current is increased, port opens to port and port closes, proportionally increasing pressure at port. Performance data Pressure Drop drop Curves curves If the pressure at port exceeds the setting of the valve, the spool will shift further and relieve to port. Features Compact design allows for more flexible machine design Ratings and Specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Maximum inlet pressure, A() and P() Maximum inlet pressure, Tank () EPPV6 - Proportional Valve Proportional pressure reducing valve 8. L/min (. USgpm) 5 bar (75 psi) Excellent repeatability, hysteresis and resolution due to bearing design Quality standard reduces maintenance and downtime costs Available with manual override option 5 bar (75 psi) bar (5 psi) In accordance with control pressure range in model code 8. L/min (. USgpm) - to 5 C (- to F) TC6 Reduced pressure range Maximum operating flow Temperature range Cavity Fluids Mineral oil according to DIN 55 Filtration Cleanliness code /8/5 Recommended PWM frequency Hz Hz PWM Resistance Current Protection class Port A to T Pressure drop bar flow (l/min) bar 5 bar bar bar Port P to A <.7 bar (pa = ) <. bar (pa = 5) <.5 bar (pa = 5) 5. ohms +/-5% for V. ohms +/-5% for V 5 ma for V 75 ma for V Up to IP6K6 / IPX9K flow (l/min) bar 5 bar bar Performance curves Regulated pressure vs. amperage p A -p t [bar] P A (I ) p A (I ) *9% P A (I ) *% P A (I=) 5ms 5ms time Reduced Reduced pressure pressure bar bar bar 5 bar bar electrical signal Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

84 EPPV6 - Proportional Valve Proportional pressure reducing valve/relief, spool 8. L/min (. USgpm) 5 bar (75 psi) Model code EPPV6 H M ** ** D Y Function EPPV6 - Proportional pressure reducing valve Control pressure - bar (9 psi) - bar (6 psi) 6 Voltage rating - V - V Seal material lank - NR una 5 Port size 7 Voltage type D - DC Manual override option Code Port size Cartridge only 8 Connector type Y - AMP Jr Power Timer M- with manual override 9 Special features - None Cartridge only Dimensions (mm) (5.9) (7.) (8.9) (.9) () P T (ø.5) A (ø.5+. (x)) (89) -8 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

85 EPRV- - Proportional valve Proportional reducing/relief, spool 7.6 L/min ( USgpm) 5 bar (5 psi) Description The EPRV- is an electric, proportionally controlled, internally pilot operated, spool type, screw-in relief valve. Operation This valve remains open from port to port (port must be vented). Once the predete mined pressure\is reached at port, the spool shifts to restrict the inlet flow at port, which regulates the pressure at port. If the pressure at port exceeds the setting of the valve, the spool will shift farther and relieve to port. Functional symbol Functional Symbol (P) (RP) Sectional view View (T) Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports),5-5 bar (5-5 psi) Cartridge fatigue pressure (infinite life) 5 bar (5 psi) Rated flow - 7,6 L/min ( -. USgpm) Cavity C-- Standard housing materials Aluminum Temperature range - to C (- to 8 F) Fluids All general purpose hydraulic fluids such as: MIL-H-566, SAE, SAE, etc. Filtration Cleanliness code 8/6/ Weight cartridge and coil, kg (.98 lbs) Seal kits 5658 (una-n) (Viton ) Viton is a registered trademark of E.I. DuPont Pressure override characteristics Pressure override, energized Pressure override, energized Pressure override, de-energized Flow - L/min (8, cst 9 C) Flow - L/min (8, cst 9 C) Pressure - psi 8 Pressure - bar Pressure - psi 5 Pressure - bar Flow - USgpm (5 SUS F) Flow - USgpm (5 SUS F) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

86 EPRV- - Proportional valve Proportional reducing/relief, spool 7.6 L/min ( USgpm) 5 bar (5 psi) Model code EPRV (V) (A) ** *** * Function EPRV - Proportional reducing/relieving valve Size - size Seal material lank - una-n V - Viton Maximum pressure (factory set) Customer to specify settings in increments of 7 bar ( psi) and coded in hundreds of psi within the -5 bar range (-5 psi) range. Example: 5-5, (5 psi) Dimensions mm (inch) Torque cartridge in aluminum housing 7-5 Nm (5- ft. lbs) 5 Port size - Cartridge only Performance Characteristics Cartridges only Zero outlet pressure Code Port size Housing number /8 SPP -758* 6T SAE * G / SPP 8767 G /8 SPP H SAE H SAE *Light duty housing. See section J for housings. 6 Voltage rating - No coil D - VDC D - VDC - VDC/w diode* - VDC/w diode* *Optional arc suppression diode. Note: This valve uses the standard J series coils, see section C for coil part numbers and specifications. Reduced pressure bar 8 5 psi Step response 7 Connector types lank - No coil G - DIN 65 Q - Spade Terminals W - Leadwire N - Deutch Y - Amp JR volts.... seconds Response time 8 Special features - None (Only required if valve has special features, omitted if. ) Warning Maintain 5-8 Nm(-6 ft lbs) maximum torque on valve tube nut.over tightening may cause valve failure. 9 6 Input voltage Pressure - psi 5 5 Pressure gain 7 Pressure - bar Valve is shown with W coil. 6 9 volts Input 5 C (77 F) -86 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

87 EPRV- EPRV- Proportional pressure reducing-relieving Proportional pressure valve reducing-relieving valve Description Operation Description The EPRV- is an electric, This Operation valve remains open the predetermined spool shifts to pressure If exceeds the pressure the at setting port of Description proportionally controlled, Operation from port to port (port is restrict reached the at port inlet, flow the spool at exceeds the valve, the the setting spool the valve, The EPRV- is an is an electric, electric, This valve remains open open will The internally EPRV- pilot operated, is an electric, spool This must valve be remains vented). open Once shifts the spool the port spool, to which restrict shifts shifts regulates the to inlet flow the exceeds to exceeds shift spool farther will the shift setting and farther of setting relieveand proportionally controlled, from port to to port port (port of at restrict port, the which inlet regulates flow at the relieve the valve, to port the. spool will internally proportionally type, screw-in pilot pilot operated, controlled, relief valve. spool spool from the (port must predetermined port must be be to vented). port pres- (port Once restrict the pressure the inlet at port flow. the to port valve,. pressure port, which at port regulates. shift farther the and spool relieve will type, internally screw-in pilot relief operated, relief valve. valve. spool sure the must predetermined is reached be vented). at port Once pressure predetermined is reached at port pres-, the If the pressure at at port port. to port., port If the the pressure, pressure which regulates port port. shift to port farther. and relieve type, screw-in relief valve. the Functional Symbol Ratings sure RATINGS is and reached AND specifications SPECIFICATIONS port, If the pressure at port Functional Symbol Performance RATINGS data AND is data typical SPECIFICATIONS is typical with fluid with at,8 fluid cst at (5,8 SUS) cst and (5 9 C SUS) ( F) and 9 C ( F) Functional symbol Symbol ( P) Typical Performance application data pressure pressure is typical (all ports) (all with ports) fluid at,8 cst (5 SUS) and 9 C ( F),5, bar bar (5 - psi) ( P) Maximum Typical application Inlet Inlet Pressure Pressure pressure (all ports),5-7 bar (5 bar bar - (5 psi) ( P) Cartridge Maximum fatigue fatigue Inlet pressure Pressure pressure (infinite (infinite life) life) 7 7 bar bar (5 ( psi) Rated flow L/min (8 USgpm) Rated Cartridge flow fatigue pressure (infinite life) 7 L/min bar (8( psi) (P) Cavity C-- Cavity Rated flow L/min (8 USgpm) C-- (T) Standard housing materials Aluminum (P) Standard Cavity housing materials Aluminum C-- (P) (T) Temperature range - to C (- to 8 F) (T) Temperature Standard housing range materials - to C (- Aluminum to 8 F) Sectional View Fluids All general purpose hydraulic fluids such as: Fluids Temperature range All general purpose MIL-H-566, - hydraulic to C SAE fluids, (- SAE to such, 8 F) etc. as: Sectional View MIL-H-566, SAE, SAE, etc. Sectional view View Filtration Fluids All general purpose hydraulic Cleanliness fluids code 8/6/ such as: Weight Filtration cartridge and coil MIL-H-566, Cleanliness SAE,, code SAE kg (.98 8/6/, etc. lbs) Seal Weight Filtration kits cartridge and coil Cleanliness, 5658 code kg (.98 (una-n) 8/6/ lbs) Seal Weight kits cartridge and coil 5658, kg (una-n) (.98 (Viton lbs) ) Viton is a registered trademark Seal kits of E.I. (una-n) (Viton DuPont ) Viton is a registered trademark of E.I. DuPont (Viton ) Viton is a registered trademark of E.I. DuPont Pressure Override Characteristics Reducing Mode EPRV-X-XX-- Pressure override, Override characteristics energized Characteristics Reducing Mode Pressure Override Characteristics EPRV-X-XX-- Reducing Mode Pressure override, energized EPRV-X-XX-- Pressure override, energized A EPRV-X--- A EPRV-X--- 5 A EPRV-X--- A A C EPRV-X--- EPRV-X--- EPRV-X--- 5 A C EPRV-X--- EPRV-X--- 5 C EPRV-X C 5 C C Flow (gpm) Flow (gpm) Pressure override, de-energized Flow (gpm) Pressure override, de-energized Pressure override, de-energized A EPRV-X--- A 8 EPRV-X--- A EPRV-X--- A Flow - L/min (8, cst 9 C) A EPRV-X--- A Flow - L/min (8, C EPRV-X--- cst 9 C) 8 EPRV-X--- 8 EPRV-X--- Flow 7 - L/min (8, cst oil 9 C) Flow 7 - L/min (8, C EPRV-X--- C EPRV-X--- cst oil 9 C) C C 8 8 C Flow (gpm) Flow (gpm) EATON Vickers Screw-In Cartridge Where Valves measurements V-VLOV-MC-E are critical Flow request September, (gpm) certified 7 drawings. We reserve the right to change specifications without notice. -58 Flow - USgpm EATON Vickers (5 Eaton SUS Screw-In Hydraulic oil Cartridge F) Valves V-VLOV-MC-E September, 7 Cartridge Valves (SiCV) E-VLSC-MC-E6 January Flow - USgpm 8 (5 SUS F) -87 Flow - USgpm (5 SUS F) Flow - USgpm (5 SUS F) Pre ure - p i - p i P P Pressure Pressure P Pressure Pre ure - ar - ar Pre ure - p i - p i EPRV-- Proportional valve Proportional reducing/relief, spool L/min (8 USgpm) 7 bar ( psi) Pre ure - ar - ar

88 EPRV-- Proportional valve Proportional reducing/relief, spool L/min (8 USgpm) 7 bar ( psi) Model code EPRV (V) ** ** *** * Pressure - bar nds Dimensions mm (inch) Torque cartridge in aluminum housing 7-5 Nm (5- ft. lbs) Function EPRV - Proportional EATON Vickers Screw-In Cartridge Valves V-VLOV-MC-E September, 7-88 Valve is shown with W coil. EPRV (V) ** ** *** * - Cartridge only reducing/relieving Customer to specify settings in valve increments of 7 bar Code Port size Housing number ( psi) and coded in hundreds Function A /8 SPP -758* Maximum pressure of psi within the 5-7 bar EPRV - Proportional Size (factory set) range (5- psi) range. A6T SAE * reducing/relieving - valve size Customer to specify Example: settings 5-5, (5 psi) AG / SPP 8767 in increments of 7 bar ( psi) and coded in hundreds AG /8 SPP 8767 Size of psi within the 5-7 bar - Size Seals A6H SAE range (5- psi) 6 Voltage range. rating lank - una-n A8H SAE Example: 5-5, (5 - No psi) coil V - Viton Seals D - VDC *Light duty housing. lank - una-n D - VDC See section J for housings. 6 Voltage rating V - Viton - VDC/w diode* Warning - No coil - VDC/w diode* D - VDC 7 Connector types 8 *Optional arc suppression diode. Coil series Maintain 5-8 Nm (-6 ft. lbs) D - VDC WARNING maximum torque on valve Note: This valve uses 7the Connector standard Types lank - No coil 8 Coil Series lank - No coil - VDC/w diode* tube nut. Over tightening may Maintain 5-8 Nm - VDC/w J diode* series coils, see section lankc - for No coil coil G - DIN 65 lank - No coil J - J series coil cause valve failure. (-6 ft. lbs) maximum torque on valve tube part numbers and specifications. G - DIN 65 Q - Spade Terminals J - J series coil *Optional arc suppressing diode. Q - Spade terminals W - Leadwire Note: This valve uses the standard W - Leadwire N - Deutch 9 9 Coil special features nut. Over tightening may J series coils, see section C for Coil Special Features N - Deutch Y - Amp JR cause valve failure. coil part numbers and specifications. Y - Amp JR - None - None Dimensions (Only required when (Only valve required when valve has mm (inch) has special features, special omitted features, omitted if. ) Torque cartridge in if. ) aluminum housing 7-5 Nm (5- ft. lbs). 8 Performance Characteristics s Cartridges only Zero outlet pressure Maximum pressure (factory set) Reduced Pressure (psi) 6 Reduced Pressure (psi) Reduced Pressure (psi) 8 6 A A 8 6 C C Current (A) A EPRV-X EPRV-X Step Response Curve Reduced Pressure (psi) 5 Port size Pressure vs. Current Current C (A) EPRV-X A C. 8 6 C.... A EPRV-X--- EPRV-X--- C EPRV-X Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January A Input Current (A) Time (seconds) A EPRV-X--- EPRV-X--- Time (seconds) C EPRV-X--- A EPRV-X EPRV-X--- C EPRV-X--- Input Current (A)

89 EPRV-6 - Proportional valve Proportional reducing/relief, spool 8 L/min ( USgpm) 5 bar (5 psi) Operation This valve remains open from port to port (port must be vented). Once the predetermined pressure is reached at port, the spool shifts to restrict the inlet flow at port, which regulates the pressure at port. If the pressure at port exceeds the setting of the valve, the spool will shift farther and relieve to port. Features Hardened and ground components for accurate consistent control and a long life. IP69K Tough coil compatibility continuously rated. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports),5-5 bar (-5 psi) Cartridge fatigue pressure (infinite life) 5 bar (5 psi) Rated flow -8, L/min (- USgpm) Temperature range - to C (- to 8 F) Cavity C-6- Fluids All general purpose hydraulic fluids such as: MIL-H-566, SAE, SAE etc. Filtration Cleanliness code 8/6/ Housing material (standard) Aluminum Weight including coil,9 kg (. lbs) Seal kit 5658 (una-n), (Viton ) Viton is a registered trademark of E.I. DuPont. Pressure drop curves Pressure override, energized Pressure override, de-energized Flow - L/min (8, cst 9 C) Flow - L/min (8, cst 9 C) Pressure - psi 8 Pressure - bar Pressure - psi 5 Pressure - bar Description This is a low pressure proportional pilot operated pressure reducing valve with a reverse relief screw in cartridge valve. It is ideal for the control of compensators on a pump or brake and clutch systems on a transmission circuit. Reduced pressure bar Flow - USgpm (5 SUS F) Performance curves Cartridges only psi 6 Step response,,,, Response time volts 9 6 Zero outlet pressure Inputvoltage seconds 5 Pressure gain 5 C (77 F) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January Pressure -psi Flow - USgpm (5 SUS F) volts 5 Pressure -bar

90 EPRV-6 - Proportional valve Proportional reducing/relief, spool 8 L/min ( USgpm) 5 bar (5 psi) Model code EPRV 6 (V) ** *** *** * Function EPRV - Proportional reducing/relieving valve Size 6-6 size Seal material lank - una-n V - Viton Maximum pressure Customer to specify settings in increments of 7 bar ( psi) and coded in hundreds of psi within the -5 bar range (-5 psi) range. Example: 5-5, (5 psi) Port size Code 6 T 6G H Port size Cartridge only /" SPP SAE /" SPP SAE Housing number Aluminum single -7565* 5666* Connector types lank - No coil G - DIN 65 Q - Spade Terminals W - Flying Lead N - Deutsch Y - Amp JR For coil part numbers and dimensions see section C. H *Light duty housing. SAE Special features - None See section J for housing details. 6 Voltage rating - No coil D - VDC D - VDC 6D - 6VDC - VDC/w diode* - VDC/w diode* *Optional arc suppression diode. Only required if valve has special features, omitted if. Dimensions mm (inch) Cartridge only Valve is shown with W coil. Torque cartridge in aluminum housing 8- Nm (8-9 ft lbs). Installation drawing.8 (.5) 77.9 (.7).8 (.5) 57 (.) 88.9 (.5). (.5) 8. (.). (.) 9.68 (.688). (.5) X8.7 (.) Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. -9 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

91 - Additional products, product lines, and services offered by Eaton - For hydropower, it s... Durability. Complete plant control systems for gate operation, turbine governors and balance of plant... including total hydraulic control systems, entire power distribution and control systems, coolant, lubrication and filtration systems. All with the most respected brand name products in the industry, manufactured and war- ranted by Eaton under a single purchase order. For wind energy, it s... Reliability. Eaton s integrated systems help harvest the inexhaustible green power of wind. In constant use under the harshest conditions, wind turbines demand extreme reliability and durability from every component. Eaton is a world leading manufacturer of those critical hydraulic, electrical and filtration products. For everyone, it s... 8 Eaton Corporation Sustainability. 65 Lone Oak Road Eden Prairie, MN Eaton seeks out and tests the latest environmentally acceptable and biodegradable hydraulic fluids...from all over the world. y leading the way for our customers and their industries, we are working to sustain and safeguard the environment, everywhere our products are at work. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

Proportional Valves. Proportional solenoid valves for pressure and flow control B-1.A. An Eaton Brand

Proportional Valves. Proportional solenoid valves for pressure and flow control B-1.A. An Eaton Brand Proportional Valves Proportional solenoid valves for pressure and flow control An Eaton rand -.A Proportional Valves Valve Locator/Section Contents Note: Proportional valve solenoid coils and electronic

More information

Proportional Valves. Proportional solenoid valves for pressure and flow control

Proportional Valves. Proportional solenoid valves for pressure and flow control Proportional Valves Proportional solenoid valves for pressure and flow control EATON Vickers Screw-In Cartridge Valves V-VLOV-MC-E4 September, 7 - Electro- Proportional Valves Section Contents Typical

More information

Solenoid Valves. Poppet and Spool type solenoid actuated valves for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm) A-1.

Solenoid Valves. Poppet and Spool type solenoid actuated valves for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm) A-1. Solenoid Valves Poppet and Spool type solenoid actuated valves for applications up to 5 bar (5 psi) and 7 L/min (6 USgpm) n Eaton Brand ETON Screw-In Cartridge Valves E-VLSC-MC-E November 9 -. Solenoid

More information

Solenoid valves. Poppet and Spool type solenoid actuated valves for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm)

Solenoid valves. Poppet and Spool type solenoid actuated valves for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm) Hydraulic Screw-in Cartridge Valves (SiCV) Solenoid valves Poppet and Spool type solenoid actuated valves for applications up to 5 bar (5 psi) and 7 L/min (6 USgpm) Solenoid valves SOLENOID VLVES...- SV5-8-C/CM

More information

Vickers. Proportional Valves. EPV10 Series. Proportional Flow Controls. Released 6/95

Vickers. Proportional Valves. EPV10 Series. Proportional Flow Controls. Released 6/95 Vickers Proportional Valves EPV1 Series Proportional Flow Controls Released 6/95 715 Table of Contents Features and Benefits..............................................................................

More information

Cartridge Valves. Proportional Valves Screw-in Cartridge Valves. Vickers. Maximum Pressure 280 bar (4000 psi) - Maximum Flow 160 l/min (42 USgpm)

Cartridge Valves. Proportional Valves Screw-in Cartridge Valves. Vickers. Maximum Pressure 280 bar (4000 psi) - Maximum Flow 160 l/min (42 USgpm) Vickers Cartridge Valves Proportional Valves Screw-in Cartridge Valves Maximum Pressure 8 bar (4 psi) - Maximum Flow 6 l/min (4 USgpm) Revised 7/ 76 Contents MODEL DESCRIPTION TYPICL PPLICTION PRESSURE

More information

Vickers. Proportional Valves. EPV16 Series Valvistor Proportional Flow Controls

Vickers. Proportional Valves. EPV16 Series Valvistor Proportional Flow Controls Vickers Proportional Valves EPV6 Series Valvistor Proportional Flow Controls Vickers, Incorporated, 998 All rights reserved Features and Benefits The EPV (Electro Proportional Valve) series of poppet valves

More information

Check valves Direct and pilot operated check valve functions for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm)

Check valves Direct and pilot operated check valve functions for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm) Hydraulic Screw-in Cartridge Valves (SiCV) Check valves Direct and pilot operated check valve functions for applications up to 5 bar (5 psi) and 7 L/min (6 USgpm) Check valves CHECK VALVES... -4 FPR -

More information

Logic elements. Differential pressure sensing elements for applications up to 350 bar (5000 psi) and 400 L/min (100 USgpm)

Logic elements. Differential pressure sensing elements for applications up to 350 bar (5000 psi) and 400 L/min (100 USgpm) Hydraulic Screw-in Cartridge Valves (SiCV) Logic elements Differential pressure sensing elements for applications up to 50 bar (5000 psi) and 400 L/min (00 USgpm) Logic elements LOGC ELEMENTS... -4 APPLCATON

More information

SV9A-10-E - Solenoid Valve 4-way, 3-position spool type solenoid valve Up to 36 L/min (9.5 USgpm) 210 bar (3000 psi)

SV9A-10-E - Solenoid Valve 4-way, 3-position spool type solenoid valve Up to 36 L/min (9.5 USgpm) 210 bar (3000 psi) SV9--E - Solenoid Valve -way, -position spool type solenoid valve Up to 6 L/min (9.5 USgpm) bar ( psi) () () (P) (T) In the de-energized position all ports are closed. When solenoid '' is energized flow

More information

Catalog HY /US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI

Catalog HY /US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI Catalog HY15-352/US Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI PRESSURE RELIEVING AP1B2YP... 2G... Increase /Increase Current...5.3/1.4... 35/5... 7-8 AP2B2YP... C8-2...

More information

Catalog HY /US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI

Catalog HY /US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI Catalog HY15-351/US Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI PRESSURE RELIEVING AP1B2YP... 2G... Increase /Increase Current...5.3/1.4... 35/5... 7-8 AP2A2... C8-2... Increase

More information

Mobile Directional Valve. Product Catalog MDG for Mobile Equipment Flows to 60 I/min (15.8 USgpm)

Mobile Directional Valve. Product Catalog MDG for Mobile Equipment Flows to 60 I/min (15.8 USgpm) Mobile Directional Valve Product Catalog MDG for Mobile Equipment Flows to 60 I/min (15.8 USgpm) Table of Contents General Information...3 Model code Valve Section...4 Valve Assembly...5 Spool Data...6

More information

Proportional Flow-Control Cartridges, Size 5

Proportional Flow-Control Cartridges, Size 5 Proportional Flow-Control Cartridges, Size Q max = l/min, p max = bar, Q N = l/min at p bar Leak free, load compensated, two stage Description Series MVRPLSA two-stage proportional flow-control cartridges

More information

Proportional Valves MODEL DESCRIPTION FLOW CAVITY 4/3 PROPORTIONAL DIRECTIONAL VALVE 8 GPM C1040 PDFC-4M PDFC-4L

Proportional Valves MODEL DESCRIPTION FLOW CAVITY 4/3 PROPORTIONAL DIRECTIONAL VALVE 8 GPM C1040 PDFC-4M PDFC-4L Proportional Valves MODEL DESCRIPTION FLOW CAVITY 4 b a PDFC-4M 4/3 PROPORTIONAL DIRECTIONAL VALVE 8 GPM C040 4 3 b a PDFC-4L 3 3 EPRR-0 PROPORTIONAL PRESS. REDUCING/RELIEVING GPM C030 EPRT-08 PROPORTIONAL

More information

Directional Control Valves

Directional Control Valves Overview HYDAC offers several functions of the Directional Control Cartridges. HYDAC Manually operated position, - way normally closed, spring return, directional valve features poppet design. It offers

More information

Mobile Valves Proportional - Load Sensing

Mobile Valves Proportional - Load Sensing Mobile Valves Proportional - Load Sensing Model CML60 325 bar 60 L/min Up to 8 sections Eaton F(x) Compliant Table of Contents General Information... 3 Model Code Valve Section... 4 Valve Assembly... 5

More information

DMH085** Series will be available January 1, Catalog HY /US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO.

DMH085** Series will be available January 1, Catalog HY /US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. Catalog HY-/US Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. /GPM BAR/PSI DL8... C8-... Position, Way, N.C. Poppet,... Pull to Open.../8... /... DL... C-... Position, Way, N.C. Poppet,... Pull

More information

DRV2-080 Adjustable, Direct-Acting Relief Valve

DRV2-080 Adjustable, Direct-Acting Relief Valve SOLENOID DRV2-080 Adjustable, Direct-Acting Relief Valve SERIES 8 CHECK MOTION FLOW USASI / ISO ➁ ➀ DESCRIPTION An adjustable, direct-acting poppet cartridge valve designed to limit pressure in hydraulic

More information

Proportional Directional Control Cartridge Valves: PSV10-34 & PSV12-34

Proportional Directional Control Cartridge Valves: PSV10-34 & PSV12-34 Control Cartridge Valves: PSV10-34 & PSV12-34 SCHEMATIC PRESSURE* FLOW CAVITY COIL Page 2 PSV10-34-02 250 BAR 3600 PSI 22 LPM 6 GPM SDC10-4 M16-26W R16-20W Page 4 PSV12-34-02 260 BAR 3770 PSI 50 LPM 13

More information

Directional Control Valve Series D3W Soft Shift

Directional Control Valve Series D3W Soft Shift Characteristics The D3W is a 3-chamber, electrically controlled 4/3 or 4/ way directional control valve. It is activated directly by solenoids with screwed in wet pin armature. The soft shifting of this

More information

Vickers Pressure Relief Solenoid Operated, Two-Stage Directional Control Valve DG5S4-02 Flows to 115 l/min (30 USgpm) Pressure to 210 bar (3000 psi)

Vickers Pressure Relief Solenoid Operated, Two-Stage Directional Control Valve DG5S4-02 Flows to 115 l/min (30 USgpm) Pressure to 210 bar (3000 psi) Vickers Pressure Relief Solenoid Operated, Two-Stage Directional Control Valve DG5S4-02 Flows to 115 l/min (30 USgpm) Pressure to 210 bar (3000 psi) Revised 2/93 GB C 2037 Table of Contents Model Code...................................................................................................

More information

P.C. Priority Flow Control Valve Series J02D3. General Description

P.C. Priority Flow Control Valve Series J02D3. General Description CV Catalog HY15-352/US General Description Needle Type, Compensated Regulator Valve. For additional information see Tips on pages 1-4. P.C. Priority Control Valve Series J2D3 Features Good adjustment from

More information

Pressure Control Valves

Pressure Control Valves Control Valves DR8- Reducing/Relieving, Direct Acting, Spool Type 4 gpm (5 l/min) 6 psi (4 bar) Description A screw-in cartridge, direct acting, spool type, pressure reducing/relieving valve with internal

More information

unrestricted; preferably with coil at bottom (auto. air bleed) 12 or 24 Volt DC from an electronic controller Deutsch plug - IP67

unrestricted; preferably with coil at bottom (auto. air bleed) 12 or 24 Volt DC from an electronic controller Deutsch plug - IP67 3 Technical data General characteristics Design Flow direction Seals De-energized position Mounting attitude Description, value, unit line mounting P A controlled P R surplus flow discharge (models shown

More information

Flow Control Valve. 1 Description. 2 Symbols. Series SRCA General. 1.2 Application examples way flow control way flow control

Flow Control Valve. 1 Description. 2 Symbols. Series SRCA General. 1.2 Application examples way flow control way flow control Flow Control Valve Series SRC.. plug-in coil for easy coil change flow rates are unaffected by changes in temperature or load compact design reduced p ZnNi coating (>70h DIN EN ISO 97 NSS) Description.

More information

CLS100 Proportional Load Sensing Mobile Valve

CLS100 Proportional Load Sensing Mobile Valve Mobile Valves Proportional - Load Sensing Model CLS100 350 bar 100 L/min Up to 10 sections Eaton Pro-FX TM Compliant CLS100 Proportional Load Sensing Mobile Valve Overhaul manual / Trouble shooting guide

More information

Cartridge Valves Technical Information Directional Valves DCV 03

Cartridge Valves Technical Information Directional Valves DCV 03 OVERVIEW DCV 03 directional control valves consist of: housing (1), control spool (5), with two centering springs (4), and cylindrical operating solenoids (2, 3). The three-position directional valves

More information

Flow Control Valve. 1 Description. 2 Symbols. Series SRCA General. 1.2 Application examples way flow control way flow control

Flow Control Valve. 1 Description. 2 Symbols. Series SRCA General. 1.2 Application examples way flow control way flow control Flow Control Valve Series SRC.. plug-in coil for easy coil change flow rates are unaffected by changes in temperature or load. compact reduced p ZnNi coating (>70h DIN EN ISO 97 NSS) Description. General

More information

Chapter 2: Directional Control Valves

Chapter 2: Directional Control Valves Contents Chapter : Directional Control Valves Series Description Direct operated Pilot operated Page DIN / ISO 06 10 16 5 3 10 16 5 3 Seat valves, electrically operated D1SE - Spool valves, electrically

More information

Directional Control Valve Series D1VW

Directional Control Valve Series D1VW Characteristics The NG6 directional control valve series D1VW provides high functional limits up to 8 l/min in combination with a very low, energy-saving pressure drop. A wide variety of spool options

More information

GPM PSI LPM BAR MODEL CAVITY PAGE IF-S3A special IF-S3D special IG-S4A special 198

GPM PSI LPM BAR MODEL CAVITY PAGE IF-S3A special IF-S3D special IG-S4A special 198 Transmission & Brake Spool Valves Screw-in style GPM PSI LPM BAR MODEL CAVITY PAGE 2 1000 8 70 TC-S3A 5/8-18 186 6 1000 23 70 TF-S3A 7/8-14 188 6 1000 23 70 TF-S3D 7/8-14 190 5 1000 20 70 TG-S4A 7/8-14

More information

Large Electronically Adjustable Proportional Pressure Compensated Flow Control Engineering & Manufacturing Solutions

Large Electronically Adjustable Proportional Pressure Compensated Flow Control Engineering & Manufacturing Solutions Engineering & Manufacturing Solutions LEFC Specifications: See flow chart for capacity. Max. 3000 psi cartridge input pressure. Nominally Rated for 3000 psi (207 bar). Tank Port - #4 SAE (10 psi (0.69

More information

40 l/min (11 GPM) p max

40 l/min (11 GPM) p max Proportional Directional Control Valve, with Analog Control Electronics PRM2-06 Functional Description Size 06 (D03) Q max 40 l/min (11 GPM) p max 350 bar (5100 PSI) Technical Features Direct acting, proportional

More information

D05 Directional Control Valves

D05 Directional Control Valves Engineering D05 Directional Control Valves WFDG4S*4-01, 60 Design Wet Armature Solenoid Operated Max Pressure up to 248 Bar (3600 psi) Same Day Shipments www.fluidynefp.com Table of Contents Basic Characteristicts...2

More information

20 l/min (5 GPM) p max. Technical Features

20 l/min (5 GPM) p max. Technical Features Proportional Directional Control Valve, with Analogue Control Electronics PRM2-0 Functional Description Size 0 (D02) Q max 20 l/min (5 GPM) p max 320 bar (600 PSI) Technical Features Direct acting, proportional

More information

Directional Control Valve

Directional Control Valve Characteristics The NG6 directional control valve series D1VW provides high functional limits up to 8 l/min in combination with a very low, energy-saving pressure drop. wide variety of spool options allows

More information

CVH103P. Check Valve Series CVH103P. Technical Information. General Description

CVH103P. Check Valve Series CVH103P. Technical Information. General Description Catalog HY-351/US Information Cartridge Style Valve. For additional information see Tips on pages 1-4. Valve Series H13P Spherical poppet for low leakage D -Ring eliminates back-up rings Dual sense paths

More information

Pressure Control Valves

Pressure Control Valves Catalog HY15-351/US Contents RELIEF VALVES SEQUEN VALVES Control SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. /GPM BAR/ DIRECT ACTING RDH42... C4-2... Direct Acting Relief, Poppet Type... 3.8/1...

More information

ELECTRIC CARTRIDGES ELECTRO-PROPORTIONAL VALVES

ELECTRIC CARTRIDGES ELECTRO-PROPORTIONAL VALVES ELECTRIC CARTRIDGES ELECTRO-PROPORTIONAL VALVES 6. 9 ELECTRO-PROPORTIONAL VALVES ELECTRIC CARTRIDGES ELECTRO-PROPORTIONAL VALVES In the follow of this chapter, NEM presents the electro-proportional flow

More information

VSNG10 - SOLENOID OPERATED DIRECTIONAL VALVES

VSNG10 - SOLENOID OPERATED DIRECTIONAL VALVES CONTINENTAL HYDRAULICS VSNG10 SOLENOID OPERATED DIRECTIONAL VALVES 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM VSNG10 SOLENOID OPERATED DIRECTIONAL VALVES

More information

Pilot-Operated Proportional DC Valve Series D*1FH

Pilot-Operated Proportional DC Valve Series D*1FH Characteristics The pilot-operated proportional DC valves series of the D*1FH series are high-performance valves with electronic spool position feedback. These valves are available in sizes NG10 to NG2

More information

Directional Control Valve Series 4D01 (DENISON)

Directional Control Valve Series 4D01 (DENISON) Characteristics The Denison series 4D01 is a solenoid operated directional control valve size NG06 in -chamber design. It is direct operated by wet pin solenoids. The 4D01 is available with a Soft Shift

More information

Directional Control Valve Series D3W (Parker), 4D02 (Denison)

Directional Control Valve Series D3W (Parker), 4D02 (Denison) Characteristics Series D3W (Parker), 4D0 (Denison) The direct operated directional control valve size NG10 is available with both Parker (series D3W) and Denison (series 4D0) model codes. Both series are

More information

SM4-30 Servovalves Flows to 113 l/min (30 USgpm) Pressures to 140 bar (2000 psi)

SM4-30 Servovalves Flows to 113 l/min (30 USgpm) Pressures to 140 bar (2000 psi) Vickers Servo Valves SM4-30 Servovalves Flows to 113 l/min (30 USgpm) Pressures to 140 bar (2000 psi) Released 1/94 653 Introduction Vickers SM4-30 servovalves can provide system closed loop control with

More information

Proportional Pressure Reducing Valve, Size 16 Series DRPSB 5B...

Proportional Pressure Reducing Valve, Size 16 Series DRPSB 5B... Proportional Pressure Reducing Valve, Size 16 Series DRPSB B... l/min, bar External pilot drain to port 3 Surface protection: Cartridge is chromited, Cr VI free Very stable operation Coil can be changed

More information

CLS180 Proportional Load Sensing Mobile Valve

CLS180 Proportional Load Sensing Mobile Valve Mobile valves Proportional Load Sensing, Model CLS180 350 bar 180 L/min Up to 10 sections Eaton Pro-FX TM Ready CLS180 Proportional Load Sensing Mobile Valve Overhaul manual / Trouble shooting guide Contents

More information

Pressure Compensator Valves Series R5P (SAE Flange Mounted) General Description. Features

Pressure Compensator Valves Series R5P (SAE Flange Mounted) General Description. Features Technical Information General Description Series R5P direct operated, 3-way pressure compensators can be combined with any type of fixed or adjustable flow resistor (throttle) to provide a load compensated

More information

Pilot Operated Directional Control Valves Series D31DW, D41VW - D111VW

Pilot Operated Directional Control Valves Series D31DW, D41VW - D111VW Characteristics The D31, D41, D81, D91 and D111 are electrically controlled 4/3 or 4/ way directional control valves. The valves are pilot operated by an NG6 valve. Pressure and flow of the pilot oil have

More information

Pilot-Operated Directional Control Valves Series D3 - D11

Pilot-Operated Directional Control Valves Series D3 - D11 Catalogue HY11-500/UK Characteristics The D31, D41, D81, D91 and D111 are electrical controlled 4/3 or 4/ way directional control valves. The valves are pilot-operated by an NG6 valve. Pressure and flow

More information

PRM7-04. Functional Description HA /2012. Proportional Directional Control Valves. Replaces HA /2009

PRM7-04. Functional Description HA /2012. Proportional Directional Control Valves. Replaces HA /2009 Proportional Directional Control Valves PRM7-6/ Size D () bar (6 PSI) L/min (. GPM ) Replaces /9 Digital control Compact design Operated by proportional solenoids High sensitivity and slight hysteresis

More information

SM4-10/12/15 Servovalves Flows to 57 l/min (15 USgpm) Pressures to 210 bar (3000 psi)

SM4-10/12/15 Servovalves Flows to 57 l/min (15 USgpm) Pressures to 210 bar (3000 psi) Vickers Servo Valves SM4-10/12/15 Servovalves Flows to 57 l/min (15 USgpm) Pressures to 210 bar (3000 psi) Released 12/93 651 Introduction Vickers SM4-10/12/15 servovalves can provide system closed loop

More information

Electronic Controls Proportional Valve Control Power Plugs

Electronic Controls Proportional Valve Control Power Plugs Electronic ontrols Proportional Valve ontrol Power Plugs EHH-AMP-70-D/J/K-* Series For use with valve types: EPV**-D-* EFV-**-0DE* ERV/**-D-* EPRV**-D-* Application Primary applications are in the control

More information

VER03MP CONTINENTAL HYDRAULICS PROPORTIONAL PRESSURE RELIEF VALVES PILOT OPERATED VER03MP - PROPORTIONAL PRESSURE RELIEF VAVLES PILOT OPERATED

VER03MP CONTINENTAL HYDRAULICS PROPORTIONAL PRESSURE RELIEF VALVES PILOT OPERATED VER03MP - PROPORTIONAL PRESSURE RELIEF VAVLES PILOT OPERATED CONTINENTAL HYDRAULICS VER03MP PROPORTIONAL PRESSURE RELIEF VALVES PILOT OPERATED VER03MP - PROPORTIONAL PRESSURE RELIEF VAVLES PILOT OPERATED 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400

More information

EFC. Electronically Adjustable Proportional Pressure Compensated Flow Control

EFC. Electronically Adjustable Proportional Pressure Compensated Flow Control Engineering & Manufacturing Solutions Specifications: See flow chart for capacity. 3000 psi (207 bar) rating. Weighs 8-1/2 lbs. (3.9 kg). Standard Port size #12SAE (1-1/16 12). 10-Micron Filtration Recommended.

More information

Directional Control Valves Series D111VW. General Description. Features. Performance Curves

Directional Control Valves Series D111VW. General Description. Features. Performance Curves Technical Information General valves are piloted by a D1VW valve. The valves can be ordered with position control. The minimum pilot pressure must be ensured for all operating conditions of the directional

More information

Housings and Miscellaneous Parts

Housings and Miscellaneous Parts Housings and Miscellaneous Parts Standard and Special Valve Housings, Orifice Disks, Orifice Sizing harts, Pilot Pistons, dapters, djustment Kits and Seal Kits ETON Vickers Screw-in artridge Valves V-VLOV-M001-E1

More information

SECTIONAL BODY. Model SV. Directional Control Valves VALVES STANDARD FEATURES SPECIFICATIONS. Parallel or Series Circuit Construction ...

SECTIONAL BODY. Model SV. Directional Control Valves VALVES STANDARD FEATURES SPECIFICATIONS. Parallel or Series Circuit Construction ... Directional Control Valves SECTIONAL BODY Model SV STANDARD FEATURES SPECIFICATIONS Parallel or Series Circuit Construction Foot Mounting Pressure Rating Maximum Operating Temp....... Weight Per Section......

More information

Proportional pressure reducing valve, direct operated, increasing characteristic curve Type MHDRE 06 SK (high-performance)

Proportional pressure reducing valve, direct operated, increasing characteristic curve Type MHDRE 06 SK (high-performance) Proportional pressure reducing valve, direct operated, increasing characteristic curve Type MHDRE 6 SK (high-performance) RE 64655 Edition: 7.218 Replaces: 11.216 Size 6 Series 3X Maximum control pressure

More information

Flow control valve range

Flow control valve range inspired hydraulics. Flow control valve range FPR102 Functional description Flow control valves of the FPR10 series are used for load independent and stepless adjusting of the operating speed of hydraulic

More information

LOAD SENSE SECTIONS. Series 20. Directional Control Valves NEED NEW PIC VALVES STANDARD FEATURES SPECIFICATIONS

LOAD SENSE SECTIONS. Series 20. Directional Control Valves NEED NEW PIC VALVES STANDARD FEATURES SPECIFICATIONS Directional Control Valves LOAD SENSE SECTIONS NEED NEW PIC Series 20 STANDARD FEATURES Control and reduced Dead Band (20I) and Tie Rod Kits SPECIFICATIONS Pressure Rating Foot Mounting Maximum Operating

More information

VS6M - SOLENOID OPERATED DIRECTIONAL VALVES

VS6M - SOLENOID OPERATED DIRECTIONAL VALVES CONTINENTAL HYDRAULICS VS6M SOLENOID OPERATED DIRECTIONAL VALVES 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM VS6M SOLENOID OPERATED DIRECTIONAL VALVES

More information

Pilot Operated Directional Control Valves Series D1VP, D3DP, D4P, D9P, D11P

Pilot Operated Directional Control Valves Series D1VP, D3DP, D4P, D9P, D11P Characteristics Series D1VP, D3DP, D4P, D9P, D11P The D1VP is a hydraulically controlled 4/3 or 4/ way directional control valve. The valve can be operated either by the pilot ports X and Y via the subplate

More information

VER03M CONTINENTAL HYDRAULICS PROPORTIONAL PRESSURE RELIEF VALVES VER03M - PROPORTIONAL PRESSURE RELIEF VALVES

VER03M CONTINENTAL HYDRAULICS PROPORTIONAL PRESSURE RELIEF VALVES VER03M - PROPORTIONAL PRESSURE RELIEF VALVES CONTINENTAL HYDRAULICS VER03M PROPORTIONAL PRESSURE RELIEF VALVES 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM ACCURATE VER03M PROPORTIONAL PRESSURE RELIEF

More information

Coils and electronic controls

Coils and electronic controls Hydraulic Screw-in artridge Valves (SiV) oils and electronic controls Solenoid valve and Proportional valve coils and electronic controls for proportional valves oils and electronic controls TOUGHOILS...-5

More information

p max (see table of performances) Q max (see table of performances) bar Maximum flow rate from port P to A - B - T l/min

p max (see table of performances) Q max (see table of performances) bar Maximum flow rate from port P to A - B - T l/min 41 400/117 ED E*P4 PILOT OPERATED DISTRIBUTOR SOLENOID OR HYDRAULIC (C*P4) CONTROLLED E4P4 CETOP P05 E4R4 ISO 4401-05 E5 ISO 4401-08 p max (see table of performances) Q max (see table of performances)

More information

Directional Controls

Directional Controls Vickers Directional Controls Wet Armature Solenoid Operated Directional Control Valves Model DGV-, Series Typical Construction of a Spring-Centered DC Valve with Variable Speed Pilot Control passage Speed

More information

VED*M PROPORTIONAL PILOT OPERATED DIRECTIONAL CONTROL VALVES

VED*M PROPORTIONAL PILOT OPERATED DIRECTIONAL CONTROL VALVES CONTINENTAL HYDRAULICS VED*M PROPORTIONAL PILOT OPERATED DIRECTIONAL CONTROL VALVES 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM TOUGH VED*M PROPORTIONAL

More information

Sepehr Hydraulic Asia

Sepehr Hydraulic Asia Vickers Solenoid Operated Directional Valves Explosion Proof ATEX, UL, CSA Sepehr Hydraulic Asia DG4V-3S, X4 & X5 DG4V4-1, X5 Table of Contents Introduction General Description... 3 Features and Benefits...

More information

DL /118 ED SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT VERSION SUBPLATE MOUNTING ISO p max 280 bar Q max 50 l/min

DL /118 ED SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT VERSION SUBPLATE MOUNTING ISO p max 280 bar Q max 50 l/min 41 211/118 ED DL3 SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT VERSION SUBPLATE MOUNTING ISO 4401-03 p max 280 bar Q max 50 l/min MOUNTING SURFACE OPERATING PRINCIPLE ISO 4401-03-02-0-05 (CETOP

More information

10 FT./lbs. TORQUE FOR SOLENOID NUT MANUAL OVERIDE PIN GREY PLUG (85.3) 3.36 (74.7) SOLENOID "a" "B" PORT END (3.2) LOCATING PIN.

10 FT./lbs. TORQUE FOR SOLENOID NUT MANUAL OVERIDE PIN GREY PLUG (85.3) 3.36 (74.7) SOLENOID a B PORT END (3.2) LOCATING PIN. EDM ELECTRICAL OPTIONS: CODES B, BT or BH NFPA D size (former D) For interface pattern see Mounting Surface section. (.).9 SOL. "b" DIMENSIONS SHOWN : (MILLIMETERS) CHES SOL. "a" /- NPTF -P CONNECTOR OPTION

More information

PROPORTIONAL PRESSURE RELIEF VALVES PILOT OPERATED WITH OBE

PROPORTIONAL PRESSURE RELIEF VALVES PILOT OPERATED WITH OBE CONTINENTAL HYDRAULICS VER03MPG PROPORTIONAL PRESSURE RELIEF VALVES PILOT OPERATED WITH OBE VER03MPG - PROPORTIONAL PRESSURE RELIEF VAVLES PILOT OPERATED WITH OBE 5505 WEST 123RD STREET SAVAGE, MN 55378-1299

More information

PRM7-06. Functional Description HA /2006. Proportional Directional Control Valves. Replaces HA /2002

PRM7-06. Functional Description HA /2006. Proportional Directional Control Valves. Replaces HA /2002 Proportional Directional Control Valves PRM7-6 HA 59 /6 Size D (6)...6 PSI ( bar)...6 GPM ( L/min) Replaces HA 57 / Digital control Compact design Operated by proportional solenoids High sensitivity and

More information

PRM7-06. Functional Description HA /2014. Proportional Directional Control Valves. Replaces HA /2013

PRM7-06. Functional Description HA /2014. Proportional Directional Control Valves. Replaces HA /2013 Proportional Directional Control Valves PRM7-6 / Size 6 (D ) bar (76 PSI) L/min (.6 GPM) Replaces HA 7 / Digital control Compact design Operated by proportional solenoids High sensitivity and slight hysteresis

More information

Vickers. Servo Valves. SM4-40 Servovalves. Flows to 151 l/min (40 USgpm) Pressures to 350 bar (5000 psi) Released 1/94

Vickers. Servo Valves. SM4-40 Servovalves. Flows to 151 l/min (40 USgpm) Pressures to 350 bar (5000 psi) Released 1/94 Vickers Servo Valves SM4-40 Servovalves Flows to 151 l/min (40 USgpm) Pressures to 350 bar (5000 psi) Released 1/94 654 Introduction Vickers SM4-40 servovalves can provide system closed loop control with

More information

Proportional Pressure Reducing Valve PDM08130

Proportional Pressure Reducing Valve PDM08130 Proportional Pressure Reducing Valve PDM08130 up to 80 bar up to 10 l/min Cartridge valves Control electronics Connection housings 486 1. DESCRIPTION 1.1. GENERAL According to DIN-ISO 1219, HYDAC proportional

More information

Série D3 Válvula Direcional CETOP 5 e NG 10. Catálogo HY /US

Série D3 Válvula Direcional CETOP 5 e NG 10. Catálogo HY /US Série D3 Válvula Direcional CETOP 5 e NG 10 Catálogo HY14-2502/US Catalog HY14-2502/US Introduction pplication Series D3 hydraulic directional control valves are high performance, direct operated 4-way

More information

Proportional pressure relief valve, pilot-operated, with anti-cavitation function, decreasing characteristic curve Type KBVS.2DB

Proportional pressure relief valve, pilot-operated, with anti-cavitation function, decreasing characteristic curve Type KBVS.2DB Proportional pressure relief valve, pilot-operated, with anti-cavitation function, decreasing characteristic curve Type KBVS.2DB RE 18377 Edition: 11.2017 Size 2 Series B Maximum working pressure 420 bar

More information

4/2 and 4/3-Way Proportional Directional Control Valve Direct Operated

4/2 and 4/3-Way Proportional Directional Control Valve Direct Operated Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service 4/2 and 4/3-Way Proportional Directional Control Valve Direct Operated Model 4 WRA(E)B Size 6 Series 1X

More information

Proportional pressure reducing valve, direct operated, increasing characteristic curve Type MHDRE 06 FK (high-performance)

Proportional pressure reducing valve, direct operated, increasing characteristic curve Type MHDRE 06 FK (high-performance) Proportional pressure reducing valve, direct operated, increasing characteristic curve Type MHDRE 06 FK (high-performance) RE 64656 Edition: 07.18 Replaces: 11.16 Size 6 Series 3X Maximum control pressure

More information

Proportional Electro-Hydraulic Relieving and Reducing Valves

Proportional Electro-Hydraulic Relieving and Reducing Valves These valves consist of a small size but high performance EH series electro-hydraulic proportional pilot relief valve and reducing valve with relief function. The valves control the system pressure proportionally

More information

Directional Controls

Directional Controls VICKERS Directional Controls Solenoid Operated Directional Control Valves NF D05, ISO-4401-05 DG4S*-01**-5* ir Gap ype Revised 8/97 671 able of Contents DG4S*-01 Model Code..................................................................................

More information

Chapter 6: Check Valves

Chapter 6: Check Valves Contents Chapter : Check Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 0 10 1 25 32 Subplate Screw-in Slip-in Shuttle valves SSR -2 Check valves, direct operated

More information

29 158/ Proportional Pressure Relief Valve Models DBE and ZDBE, Series 1X. Ordering code DBE 6 1X G24 1/ PSI (315 bar)

29 158/ Proportional Pressure Relief Valve Models DBE and ZDBE, Series 1X. Ordering code DBE 6 1X G24 1/ PSI (315 bar) RA 29 58/6.98 Proportional Pressure Relief Valve Models DBE and ZDBE, Series X Size 6 (R 3)... 46 PSI (35 bar)... 8 GPM (3 L/min) RA 29 58/6.98 Replaces: 5.94 Valve for limiting system pressure Operation

More information

Vickers. Piston Motors. Inline Piston Motors. Fixed and Variable Displacement. Revised 5/99 691

Vickers. Piston Motors. Inline Piston Motors. Fixed and Variable Displacement. Revised 5/99 691 Vickers Piston Motors Inline Piston Motors Fixed and Variable Displacement Revised 5/99 691 Table of Contents Introduction........................................................................................

More information

BW0511FP. ByWire Elements BW0511FP Flow Sharing Element Interface IBW0511

BW0511FP. ByWire Elements BW0511FP Flow Sharing Element Interface IBW0511 ywire Elements Flow Sharing Element Interface IW05 efore use, carefully read the GENERL INSTRUCTIONS FOR USE OF DIRECTIONL CONTROL VLVES Technical data Nominal flow Nominal pressure 35 l/min - P=8 bar

More information

Directional Controls

Directional Controls Vickers Directional Controls Mechanical ctuators Directional Control Valves Directional Control Valves 310 bar (4500 psi) Flows to 114 l/min (30 USgpm) NF D05, ISO-4401-05 DG1V4-01**-10 Knob Operated DG17V4-01**-10

More information

Electrically Operated Pressure Relief Cartridge, Size 16 Seated Pilot Stage, Spool Type Main Stage Series WUVPA 1...

Electrically Operated Pressure Relief Cartridge, Size 16 Seated Pilot Stage, Spool Type Main Stage Series WUVPA 1... Electrically Operated Pressure Relief Cartridge, Size 16 Seated Pilot Stage, Spool Type Main Stage Series WUVPA 1... 3 l/min, 420 bar Two pressure valve, ON / OFF or HI / LO With internal pilot drain to

More information

Proportional Valves. Proportional Two-Stage Directional Valves

Proportional Valves. Proportional Two-Stage Directional Valves VICKERS roportional Valves roportional Two-Stage Directional Valves KHDG5V-5/7, 1 Series ressures to 3 bar ( psi) This product has been designed and tested to meet specific standards outlined in the European

More information

Proportional pressure relief valve, directly operated, rising characteristic curve

Proportional pressure relief valve, directly operated, rising characteristic curve Proportional pressure relief valve, directly operated, rising characteristic curve RE 1139-0/09.07 Replaces: 0.05 1/1 Type KBPS.A (High-Performance) Component series A Maximum operating pressure 0 bar

More information

Directional Valves. Pilot Operated Directional Valves. Vickers. Service Data

Directional Valves. Pilot Operated Directional Valves. Vickers. Service Data Service Data Vickers Directional Valves Pilot Operated Directional Valves Eaton Hydraulics, Incorporated 14615 Lone Oak Road Eden Prairie, Minnesota 55344-2287 U.S.A. 5007.04/EN/0799/S DG5V - 8 - S/H -

More information

D4E DIRECT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SERIES 41

D4E DIRECT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SERIES 41 83 250/198 ED D4E DIRECT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SUBPLATE MOUNTING CETOP 05 p max 250 bar Q max (see performance ratings table) MOUNTING INTERFACE OPERATING

More information

ISO 4401 size 07; 315 bar (4500 psi); up to 200 L/min (53 USgpm) General Description

ISO 4401 size 07; 315 bar (4500 psi); up to 200 L/min (53 USgpm) General Description Vickers SystemStak SystemStak Valves ISO 441 size 7; 315 bar (45 psi); up to 2 L/min (53 USgpm) General Description This range of stackable hydraulic controls are designed to be mounted under a size 7

More information

Functional Symbols and Application Notes

Functional Symbols and Application Notes Functional Symbols and pplication Notes Model Types KHDG5V Shown Simplified symbol Model Types KHDG5V Shown K()FDG5V symbols identical, but omit pilot-stage LVDTs Simplified symbol T T Detailed symbol

More information

VED05MJ - PROPORTIONAL DIRECTIONAL CONTROL VALVES WITH OBE & POSITION FEEDBACK

VED05MJ - PROPORTIONAL DIRECTIONAL CONTROL VALVES WITH OBE & POSITION FEEDBACK CONTINENTAL HYDRAULICS VED05MJ PROPORTIONAL DIRECTIONAL CONTROL VALVES WITH OBE & POSITION FEEDBACK VED05MJ - PROPORTIONAL DIRECTIONAL CONTROL VALVES WITH OBE & POSITION FEEDBACK 5505 WEST 123RD STREET

More information

Electrically Operated Pressure Relief Cartridge, Size 1 Seated Design, Direct Acting Series WUVA 1LO...

Electrically Operated Pressure Relief Cartridge, Size 1 Seated Design, Direct Acting Series WUVA 1LO... Electrically Operated Pressure Relief Cartridge, Size Seated Design, Direct Acting Series WUVA LO....5 l/min, 40 bar Wet armature solenoid with high pressure core tube and slip on coil Coils can be changed

More information

Post-Compensated Proportional Valve CV2000LS

Post-Compensated Proportional Valve CV2000LS www.nimco-controls.com Post-Compensated Proportional Valve CV2000LS Smart Solutions... for the Future Contents Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16

More information

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX: SPECIFICATIONS D03 Pattern Directional Control Valves Also refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONTACT INFORMATION USA Headquarters Dynex/Rivett

More information

PowrFlow PVX Vane Pumps

PowrFlow PVX Vane Pumps PowrFlow PVX Vane Pumps POWRFLOW PVX VANE PUMPS YOUR SOURCE FOR VANE PUMPS FOR THE MOST DEMANDING APPLICATIONS What Makes PowrFlow PVX Vane Pumps Your Best Buy? Continental Hydraulics PowrFlow PVX Vane

More information

Pilot Operated Pressure Relief Valve Series R5V (Denison)

Pilot Operated Pressure Relief Valve Series R5V (Denison) Characteristics Pilot operated pressure relief valves series R5V have a similar design to the subplate mounted R4V series. The SAE flanges allow to mount the valves directly on the outlet flanges of pumps

More information