36EFC. Series & EFC Valve Package

Transcription

1 Engineering & Manufacturing Solutions Specifications: Rated for 0-24 gpm (0-91 lpm) depending on Series work sections used. Pressure rating 3000 psi (207 bar). 10 Micron filtration recommended. See Series literature for more specifications on work sections. See EFC literature for more specifications and information on EFC. Series & EFC Valve Package P36A ISO 9001:2008 WITH DESIGN Certificate #

2 Series & EFC Valve Package 36BFB 36PG2UEFC Schematics & Features IN (P) B A E (T) P36A FEATURES: Cast Iron Body. Buna N O Rings Heat Treaded Steel Spool ADAPTABLE TO AUTOMATED CIRCUITS for four-way directional speed control. CONTROL AND WIRING HARNESS PACKAGES available to fit customer s application. OPEN OR CLOSED PACKAGES are available to suit the customer s needs. PRECISION GROUND HEAT TREATED SPOOLS assure long life. DIAMOND HONED SPOOL BORE provides consistent spool fit with low leakage. O RING PORTS to eliminate leakage. PILOT CARTRIDGES assures positive force to shift spool. OPTIONAL HIGH LIFT RELIEF. REV(D) E-93 MATERIALS:

3 GENERAL INFORMATION: The Brand, provides the functionality of Brand s Series stack valve combined with the precise flow control of our EFC valve. This allows users to proportionally control the input flow to the stack valve in one complete package. For example, a motor s speed on a winch can be controlled in forward and reverse. The may also electrically control the rate at which a cylinder extends or retracts. Please refer to EFC, series 36 and series 38 literature for information on work sections, valve capabilities and work section model codes. General Information WIRING PACKAGES can be produced to meet any customer s requirements from simple to complex. Packages can consist of handheld, stationary or a combination of both. They can be for mobile or industrial applications. We can supply packages from coiled cables to special labels and nameplates to give you a true out-of-the-box ready to go package. Please call our engineering department and let us know what your specifications are so that we can design a custom package to suit your needs. ACCESSORY ITEMS All tie rod kits contain rods, foot brackets, lock washers and hex nuts. Please be sure to note the correct tie rod torque spec is 85 inch lbs. (9.6 N m). ASSEMBLY MODEL CODES and list prices for complete assemblies will be issued by the factory upon the request of an authorized Brand Distributor. All model codes that are issued become proprietary to the requesting distributor. Model codes will not be descriptive in nature, but shall be of a sequential numerical type. EAMPLES OF COMMON MODEL CODES: gpm (37.8 lpm) flow control, 3-ported, machined to mount on series manifold (use unloaded manifold U ) P...15 gpm (56.7 lpm) flow control, 2-ported, machined to mount on series manifold (use closed manifold C ). 36PG2CEFC.... Closed manifold machined to mount adjacent to a 2-ported. 36PG2UEFC....Unloaded manifold machined to mount adjacent to a 3-ported E-94

4 Model Codes Series & EFC Valve Package CREATING A MODEL CODE FOR S: FLOW CONTROL VALVE: PAINT: Blank No paint P Painted black (other colors available, consult factory) MP Epoxy coding PORT SIZE: 12 - #12SAE (1-1/16 12) ** - Contact factory for others FLOW SETTING: gpm (18.9 lpm) gpm (37.8 lpm) gpm (56.8 lpm) gpm (75.7 lpm) gpm (94.6 lpm) OPTIONS: W Power beyond 2P 2 port (Use closed inlet) Omit 3 port (Use unloaded inlet) M Manual override thumb screw R15 Relief set at 1500 psi (103 bar) (specify pressure in 100 psi (6.9 bar) increments, 3-port only) (2.4 mm) dashpot orifice (0.5 mm) dashpot orifice Omit Standard (0.031 (0.8 mm)) COIL VOLTAGE & TERMINAL: Omit 12 volt DC volt DC PF Female shroud with male pin PM Male tower with female pin 36PG2 EFC CONDITION OF MANIFOLD: C Closed manifold, 12 SAE tank port (Use with 2P ) U Unloaded manifold (Use with 3-port ) W Power beyond, 12 SAE tank port (Use with power beyond ) 36TR EFC NUMBER OF WORK SECTIONS: 1 One work section 2 Two work sections 3 Three work sections ETC E-95 REV(D)

5 - FLOW AND PRESSURE INFO: Pressure Drop VS. Flow for P to A or B Flow And Pressure Information Pressure Drop VS. Flow for A to B or T Pressure Drop VS. Flow for EFC Series E-96

6 .. Dimensional Data Series & EFC Valve Package DIMENSIONAL DATA: Inches & [millimeters] OUTLET PORT #10 SAE (7/8-14) 1.96" [49.8] " [42.8] 36PG2UEFC 1.49" [37.8] 36BF 36BFMA 1.37" [34.9] 36BHFR15R15 36BL2FYB 1.75" [44.5] 4 Ø0.34" [Ø8.7] B B 3.06" [77.8] 3.13" [79.4] INLET PORT #12 SAE (1-1/16-12) A A 3.13" [79.4] 7.69" [195.2] # OF L SPOOLS [174.9] [209.8] [244.7] [279.7] [314.6] [349.5] WORK PORTS SER. 36 #8 SAE (3/4-16) SER. 38 #10 SAE (7/8-14) 0.94" [24.0] H Y D R A F OR C E I N C H Y D R A F O RC E I N C Y D H R A F OR C E I NC. H Y DR A F O RC E I NC. 1.90" [48.3] L L " [20.3] E-97 REV(D)