3/8 & 1/2 NPT. with 3/8 and 1/2 NPT ports for 4 Way - 2 & 3 Position see Pg locate counterbores in body to control static squeeze on seals.

Transcription

1 8 SERIES /8 Ported Air Valves 1/ Ported Air Valves /8 & 1/ 1, 1A, 1B & 8 Series Note! Spring return & spring centered models NOT suitable for dry air service. Features & Way - Position. Way - &. operator blocks, black anodized. hard anodized for long life. interchangeable. solenoid controlled models +150 F max. See pages.5 &.6. assure reliability. with /8 and 1/ ports for Way - & see Pg.7. tance. locate counterbores in body to control static squeeze on seals. gold, have lips to hold seals in place. -Urethane bumper combination that absorbs shock but does not bounce the spool. polished to assure easy entry into seal. -G grease. Catalog Options Manual Overrides for Piloted and Solenoid Valves Valve Option -X Coil Connections, and other Solenoid Coil choices - see Pg.9 -. See note below SM-10, See page 1. See Model Charts Custom Options Customer requirements Specials Fabco-Air, Inc. has the expertise and willingness to design and modify these valves to your necessary and specific job requirements. Please advise us of your needs. See pages ii & iii Fluid Line Components, Inc. 68 S Rochester Rd. Clawson, MI 8017 Phone: Way or Way - Position - Type This Way Valve may be used for any Way, When used with internally supplied Solenoid Operators, the Supply Pressure must be con- a normally open Solenoid Valve is ordered the Solenoid Operator will be mounted on end 10 and the Spring on End Way - 5 Ported - Position - Type Use on all Way - Position applications Spools -Way - 5 Ported - - Type B Center position - All ports blocked and isolated. Use on conventional block and hold circuits Way - 5 Ported - - Type F Center position - Inlet blocked and Cylinders open to exhaust. Used to vent both ends of cylinder to allow movement. Flow controls or exhaust speed controls should not be used. Note pressures for force application and retraction, can effect large savings of high pressure air and its cost. The larger the cylinder or the faster the cycle, the higher the savings

2 /8 & 1/ 1, 1A, 1B & 8 Series PILOT OPERATED Specify Model Number from chart. Specify Options. Inlet Presure psi Pilot Pressure: Models without Spring psi Position Standard Service Spring psi -L psi, Spring Centered psi Optional Manual Overrides OUT Model Suffix -MO1 -MO -MO Direct Ported 1/ /8 1/ High Flow Position SUBBASE OR MANIFOLD MOUNTED Single Pilot Way - Way 8-SP 1-SP 1B-SP NA Type F Spool HAND LEVER OPERATED Specify Model Number from chart. Specify Options psi Direct Ported 1/ /8 1/ High Flow SUBBASE OR MANIFOLD MOUNTED Position Type F Spool Type F Spool PUSH-PULL KNOB OPERATED Specify Model Number from chart. Specify Options psi Standard knob color is black. For red knob add suffix -R to Model Number. Direct Ported 1/ /8 1/ High Flow Position Push - Pull Way - Way 8-PO 1-PO 1B-PO NA Push Way - Way 8-PS 1-PS 1B-PS NA Push Way - Way 8-PA 1-PA 1B-PA NA Push - Push Way - Way 8-PP 1-PP 1B-PP NA Push - Pull Spring Centered Way 8-PB 1-PB NA 1A-PB Push - Push Spring Centered Way 8-PPB 1-PPB NA 1A-PPB Push - Pull Spring Centered Way 8-PF 1-PF NA 1A-PF Type F Spool Push - Push Spring Centered Way 8-PPF 1-PPF NA 1A-PPF Type F Spool Fluid Line Components, Inc. 68 S Rochester Rd. Clawson, MI 8017 Phone: SUBBASE OR MANIFOLD MOUNTED.

3 /8 & 1/ 1, 1A, 1B & 8 Series /8 & 1/ Ported, 5 STYLE See pages.7 &.8 for dimensional information. Operating Temperature: No Spring to 150 Spring: Position to 150 Option -L to to 150 External Pilot Supply, Option -X: Inlet Pressure to 150 When Ordering: Pilot Pressure, Same as Internal Pilot Supply above. Specify Model Number from Chart Optional Manual Overrides Model Suffix Specify Options -MO1 Specify Volts / Hertz See pages.9 &.0 for Solenoid Operator, OUT -MO Coil and Housing information. -MO Conduit Housing C /8 1/ 1/ High Flow Sub-base/Manifold, See Pg..7 Position Single Solenoid / Way, NC 8 CS 1 CS 1B CS NA Way 8 CS 1 CS 1B CS 1A CS Single Solenoid / Way 8 CA 1 CA 1B CA NA Single Solenoid / Way 8 CP 1 CP 1B CP NA Way 8 CC 1 CC 1B CC 1A CC Solenoid Pilot, B Spool Way 8 CAB 1 CAB NA 1A CAB Solenoid Pilot, F Spool Way 8 CAF 1 CAF NA 1A CAF Grommet Housing G /8 1/ 1/ High Flow Sub-base/Manifold, See Pg..7 Position Single Solenoid / Way, NC 8 GS 1 GS 1B GS NA Way 8 GS 1 GS 1B GS 1A GS Single Solenoid / Way 8 GA 1 GA 1B GA NA Single Solenoid / Way 8 GP 1 GP 1B GP NA Way 8 GG 1 GG 1B GG 1A GG Solenoid Pilot, B Spool Way 8 GAB 1 GAB NA 1A GAB Solenoid Pilot, F Spool Way 8 GAF 1 GAF NA 1A GAF.5 Male Mini-DIN Housing F /8 1/ 1/ High Flow Sub-base/Manifold, See Pg..7 Position Single Solenoid / Way, NC 8 FS 1 FS 1B FS NA Way 8 FS 1 FS 1B FS 1A FS Single Solenoid / Way 8 FA 1 FA 1B FA NA Single Solenoid / Way 8 FP 1 FP 1B FP NA Way 8 FF 1 FF 1B FF 1A FF Solenoid Pilot, B Spool Way 8 FAB 1 FAB NA 1A FAB Solenoid Pilot, F Spool Way 8 FAF 1 FAF NA 1A FAF Fluid Line Components, Inc. 68 S Rochester Rd. Clawson, MI 8017 Phone:

4 /8 & 1/ 1, 1A, 1B & 8 Series /8 & 1/ Ported, 58 STYLE Way, Way - Position Way or Spring Return and Spring Centered Models NOT suitable for dry air service See pages.7 &.8 for other dimensional information,.1 for solenoid information. Operating Temperature: Operating Ranges, psi 58 STYLE Solenoid Valve, Model Number Code 0.9 Watts.5 Watts No Spring: to to 15 Spring: Position to to 15 Option -L to to to to 15 External Pilot Supply, Option -X: Inlet Pressure to to 150 Pilot Pressure, Same as Internal Pilot Supply above. 1 F S /60 Primary Actuator F G = Wire leads See page.1 Secondary Actuator F FB FF G GB = Wire leads GF = Wire leads S A P PR.8 for details. Series: 8 = /8, Way 8 = /8, Way NC 80 = /8, Way NO 1 = 1/, Way 1 = 1/, Way NC 10 = 1/, Way NO 1A = Way, Subbase Mount 1B = 1/, Way, Position High Flow 1B = 1/, Way NC, High Flow 10B = 1/, Way NO, High Flow Primary Solenoid Attitude 5 = Inline with Body Solenoid Watts 1 = 0.9 Watts =.5 Watts Primary Solenoid Manual Override 0 = None 1 Secondary Solenoid Attitude 0 = Other than Solenoid 5 = Inline with Body Secondary Solenoid Manual Override 0 = None 1 Volts / Hertz 1 VDC, VDC /60 VAC 10/60 VAC 1 VDC VDC Options -X = External Pilot -XV = External Pilot & Viton Seals -L Viton Seals are available in the main valve only for media compatability and therefore only in conjunction with Example: 1FS /60 - ondary Actuator No Options 10 Volt/60 Hertz. External Pilot Supply Option -X.1 1/ Primary Actuator End or Way Valve Body Secondary Actuator End Inline 1 Primary Solenoid Manual Override Position Section A A See page.1 f See page.7 f A Side View Secondary Solenoid Manual Override Position Section A A A Spr n Shown.6 Fluid Line Components, Inc. 68 S Rochester Rd. Clawson, MI 8017 Phone:

5 /8 & 1/ 1, 1A, 1B & 8 Series BASIC BODIES Primary Primary.1 Secondary SINGLE SUBBASES 5.00 Mounting Hole, Places Secondary 1.5 WAY (Plug Way) WAY Assembly Standard this End.50 Mounting Hole, Places WAY Assembly Standard this End To Order Specify Subbase Part No. listed below. SIDE PORTED /8 Ports Specify 8 PV-50 1/ Ports Specify 1 PV-50 -Way -Way Position - Type Spool -Way Position - Type Spool Way Position Cv FLOW FACTORS Type F Spool NOTE pressures for force application and retraction, can effect large savings of high pressure air and its cost. The larger the cylinder or the faster the cycle, the higher the savings. MOUNT WAY VALVE WITH ANY OPERATOR /8 or 1/ 1/ High Flow NA Subbase Mounted Side or Bottom Ported /8 1/ NA NA Shifted Shifted Centered BOTTOM PORTED /8 Ports Specify 8 PV-51 1/ Ports Specify 1 PV-51 /8 or 1/ IN & EXH Ports Ports Basic Body Outline Secondary Basic Body Outline /8 or 1/ IN, Ports Basic Body Outline Secondary MULTIPLE MANIFOLDS Primary.00 Mounting Holes Places To Order Specify Station No. - Valve Model - Manifold Number Photo shows one unit consisting of valves and manifolds: Sta. No. 1 1A-CS-MO1 with 1 PV-65 Mounting Holes Places.88 1 MOUNT ANY COMBINATION OF WAY VALVE MODELS & PORT SIZES 1.5 Primary Secondary Ports on Bottom.5 1/ IN & EXH Ports Basic Body Outline 1/ Primary Mounting Holes - Each End /-0 x.00.5 S.H.C. Valve.00 TYP. 1.8 TYP. Mounting Screws.78 Station 1 Station Station Station Etc. Valv Port C Top View End Unit 1/ IN & EXH CYLINDER PORTS /8 1/ 8 PV-65 1 PV-65 8 PV-66 1 PV-66 Fluid Line Components, Inc. 68 S Rochester Rd. Clawson, MI 8017 Phone:

6 /8 & 1/ 1, 1A, 1B & 8 Series AIR PILOT OPERATOR AIR PILOT OPERATOR with Manual Override Pilot Port / Pilot Port Max. 1/8 The 5 STYLE solenoid operator is a -way valve which, upon receiving an electrical signal, directs a pilot pressure to shift the main valve spool. Unless otherwise specified, the operator is internally supplied from the main valve inlet with pressure for piloting. If an external pilot supply is required specify Suffix -X through the main valve is of insufficient pressure for piloting, where the media through the main valve is something other than compressed air, for -way dual inlet-single exhaust, or other applications..88 Min. Position, Spring return bottom of the page. Spring Centering is incorporated within the operator dimensions. Manual Overrides applicable to Pilot Operated or 5 Style Solenoid Operated Valves OUT To Specify Add Suffix to Model Number -MO1 -MO -MO Note: The manual override stem physically contacts and moves the spool. 5 STYLE SOLENOID OPERATOR.50 See page.9 for Operator Details Housing Can Rotate STYLE SOLENOID OPERATOR with Manual Override and External Pilot Supply, Opption -X y Manual Override See page.9 for Operator.88 Min. 1.8 Max Position, Spring return bottom of the page. Spring Centering is incorporated within the operator dimensions. 58 STYLE 1.8 Dia HAND LEVER OPERATOR POSITION SPRING CENTERING OPERATOR FOR HAND LEVER ONLY Max Stroke PALM BUTTON OPERATOR Position, Spring return Spring Centering is incorporated within the operator dimensions POSITION SPRING RETURN, STANDARD & LIGHT SERVICE All valve models Standard service spring consists of two concentric helical springs. Either may be removed.8 Fluid Line Components, Inc. 68 S Rochester Rd. Clawson, MI 8017 Phone:

7 Directional Solenoid, Coil Control and Housing Valves Information 5 Style 5 STYLE Stocked Coils and Housings Conduit Housing C and Grommet Housing G Stocked Voltages: Others available, see Options on page.0. Conduit Housing C 1.5 1/ Exhaust Port Housing can rotate 60 Function AC Volts, 60 Hertz Male Mini-DIN Housing F See page.0 for connectors or contact your local distributor for additional choices. Can also be connected with individual.5" quick connect terminals. Stocked Voltages: Others available, see Options on page.0.. AC Volts, 60 Hertz DC Volts Inrush, Amp Inrush, Amp Holding, Amp or Holding, Amp Way NC 1. Volts 7.8 Volts Way NO Way NC or NO 15. Volts 9.0 Volts 7. Volts Examples = = 7. 1 =.1 Amp.08 Amp.60 Amp DC Volts Inrush, Amp Function Inrush, Amp Holding, Amp or Holding, Amp Grommet Housing G Exhaust Port Exhaust Port Housing can rotate Housing can rotate 60.. Male Mini-DIN Housing F ( mm) spacing.57 Line Terminals.5 x.0 Ground Terminal.5 x.0.9 Way NC 1. Volts 9.7 Volts 10. Volts Way NO Way NC or NO 15. Volts.8 Volts 10. Volts Examples =.8 10 = =.1 Amp.10 Amp.87 Amp Spade terminals accept miniature rectangular quick connect socket - connect terminals. Fluid Line Components, Inc. 68 S Rochester Rd. Clawson, MI 8017 Phone:

8 Directional Solenoid, Coil Control and Housing Valves Information 5 Style 5 STYLE Conduit Housing C and Grommet Housing G AC Voltages from 5. to 575 in 50 or 60 Hertz. DC Voltages from to Option -M Water tight, Molded Coil with Class A 1 F epoxy for maximum moisture resistance. NEMA 1,, and when in Option -P It offers maximum moisture and vibration resistance Option -H Option -V Option -Q Option -W Option -J Option -R Option -CC A CSA requirement. 5 STYLE Male Mini-DIN Housing F AC Voltages from. to 77 in 50 or 60 Hertz. DC Voltages from to Option -V 5 STYLE Option -YB Yoke with Molded coil Option -YM Yoke with Molded Spade Terminal and coil option -KM Yoke replaces housing for protected and control box applications. Molded coil with two.5" spade terminals for quick assembly and disconnect Exhaust Port Exhaust Port / x.0 Thick 1.7 Spade Coil 5 STYLE Option -EP For hazardous locations, includes Molded Coil. NEMA 9 & 9A Class II Groups F & G.! CAUTION! To prevent explosion, disconnect electrical circuit before opening enclosure! in operation Housing can rotate 60 AC Volts, 60 Hertz Inrush Holding Way NC Way NO Way NC or NO Way NC or NO 7. Way NC or NO 7. See examples on opposite page Fluid Line Components, Inc. 68 S Rochester Rd. Clawson, MI 8017 Phone:

9 Directional Solenoid, Coil Control and Housing Valves Information 58 Style 58 Style Way Normally Closed Exhaust to Atmosphere Available with or without Push Button Manual Override #1 Operator 0.9 Watts Volts ma ma 0.6 mm Inlet Orifice 0.8 mm Exhaust Orifice 10 psi Maximum Operating Pressure # Operator.5 Watts 9 ms with AC Volts. 1.0 mm Inlet Orifice 1.0 mm Exhaust Orifice 15 psi Maximum Operating Pressure Volts Hertz Inrush Holding Style Male Micro-DIN, Coil F Molded Water Tight See page. for connectors or contact your local distributor for additional choices. 58 Style Wire Leads, Coil G Molded Water Tight Exhaust Port Manual override if ordered Terminal. x.0 Exhaust Port Manual override if ordered A Ground Terminal.1 x.0 Fluid Line Components, Inc. 68 S Rochester Rd. Clawson, MI 8017 Phone:

10 Directional Solenoid Accessories Control Valves 5 & 58 Style Solenoid Exhaust Mufflers, #SM-10 Connectors 5 Style N Black Housing T-A.1-Voltage Receptacle with mm spacing mates with Mini-DIN Housing F Cable Diameter 16 Ga. Max. Wire Diameter. Housing can be rotated around receptacle, in 180 increments, to locate cable in desired attitude. M Connector Screw Profile Gasket, Nitrile Ribber Connectors 58 Style N Black Housing T-A.1-Voltage Max. Cable Dia. 18 Ga. Max. Wire Dia. Receptacle with 9. mm spacing mates with Micro-DIN Coil F Flat Gasket, Nitrile Ribber M Connector Screw Housing can rotate around receptacle, in 90 increments, to locate cable in desired attitude. Hard Wired Connectors Please see Section J Series hard wired connectors F Series hard wired connectors Fluid Line Components, Inc. 68 S Rochester Rd. Clawson, MI 8017 Phone: