V050 SERIES DIRECTIONAL CONTROL VALVE

Size: px
Start display at page:

Download "V050 SERIES DIRECTIONAL CONTROL VALVE"

Transcription

1 V5 SERIES DIRECTIONAL CONTROL VALVE TAKE CONTROL Take control with Muncie Power Products V5 directional control valve. The V5 is constructed with high-grade iron castings and nickel-plated spools for use in high pressure applications and can be configured with many different spool, control and positioner options. The V5 is designed for flow rates up to 6 GPM (6 LPM), and offers superior performance in a compact package. Muncie Power Products takes pride in supplying the highest quality products along with outstanding service and support. KEY FEATURES High-grade iron castings allow for high pressure capabilities for the most extreme applications TECH SPECS DESIGN TYPE Maximum Work Sections SECTIONAL Nickel-plated spools resist wear allowing for long life under high pressure conditions Tight tolerances and precision machining keep internal spool leakages low Internal oil core design allows for high flow rates and low pressure drops Load-checks on work sections and inlet relief valves are standard Versatile design can be configured with different spool, control positioner and accessory options Work sections are pre-assembled and % tested prior to shipping Additional options available, lead times may vary. Circuit Types Flow Capacity Maximum Pressure Maximum Back Pressure Recommended Filtration Oil Viscosity Range Oil Temperature Range Recommended Oil Temperature Approximate Weights (Standard Options) Open center parallel, series, tandem and closed center Nominal: 3 GPM (5 LPM) Maximum: 6 GPM (6 LPM) 3 sections: 5,44 PSI (375 BAR) 4 6 sections: 5,75 PSI (35 BAR) 7 sections: 4,7 PSI (35 BAR) 365 PSI (5 BAR) / 8 / 5 (ISO 446:999) 6 to,36 SUS ( to 3 cst) - to 8 F (-9 to 8 C) 85 to 4 F (3 to 6 C) Inlet: 3.5 lbs. (.6 Kg) Outlet:.6 lbs. (. Kg) Work Section: 4.4 lbs. (. Kg)

2 PRESSURE DROP CURVES Open Center, Pressure to Tank (P-T) Flow (LPM) P-T, Work Section Pressure Drop (PSI) Pressure Drop (BAR) WS WS P P-T, Work Sections T P T Flow (GPM) Pressure to Work Ports (P-A x /B x ) Flow (LPM) Pressure Drop (PSI) Pressure Drop (BAR) WS WS A /B A /B P 5 5 Flow (GPM) Work Ports to Tank (A x /B x -T) Flow (LPM) Pressure Drop (PSI) Pressure Drop (BAR) WS WS A /B A /B T Flow (GPM)

3 DIMENSIONS PORT SIZE AND TYPE INLET PORTS = - SAE WORK PORTS = -8 SAE OUTLET PORTS = - SAE x -8 SAE POWER BEYOND PORT = -8 SAE Spool Travel Total.39 [] T Port (or Power Beyond Port) Mounting Slots (4 Places) T Port Power Beyond Plug P/N = V5-C-PBS Used For Power Beyond Optoin.89 [48] + # of W.S. x.6 [4] B Port P Port A Port.39. Position = Pressure Out B Port Handle IN Spool OUT Position = Pressure Out A Port Handle Out Spool IN P Port Position = Neutral P Port Standard R.V. PSI (5 BAR) Adjustable from,75-,9 PSI (8- BAR) Standard R.V. P/N V5-AB-N5

4 BACK-CAP OPTIONS CONTROL OPTIONS V5-BC- Standard 3 Position, Spring Return V5-CT-AA Standard Lever Cap Note: Handle lever not included P/N for Handle: VLVH-B-64 V5-BC-6 Detent Spool In, Spring Spool Out V5-BC-7 Detent Spool Out, Spring Spool In V5-CT-AB Lever Cap for Float Spool (4th POS. Detent) Note: Handle lever not included P/N for Handle: VLVH-B-64 V5-BC-8 3 Position Detent V5-BC- 3 Position Spring Return with 4th position detent 3 V5-CT-AE Spool Cover for Back-cap Control 3 ⅛ V5-BC-33 Pneumatic Shift, On/Off or Proportional (Use w/control Type AA, AE or AJ) V5-CT-AJ Spool Eye Only for Direct Connection (Spool End Not Part of Kit) V5-BC-35 (Comes w/single acting spool AB ) V5-BC-36 (Comes w/double acting spool AC ) V5-BC-37 (Comes w/motor spool AJ ) On/Off (Bang-Bang) Electrical Control (Use w/control Type AA, AE or AJ) 4 3 Connections - = A Port - 3 = B Port (4 is an internal ground, no connection to 4 needed) V5-CT-BG Low Pressure, Dual Sided, Hydraulic Control

5 INLET SECTIONS V5-A- FM-7SX- N -5 V5 Valve Series Section Type: A = Inlet Port Size & Type: FM = - SAE top and end Inlet Options: 7SX = Inlet with relief valve (standard) 8SX = Inlet without relief valve (plugged) Relief Valve Setting: 5 =,75 PSI (5 BAR) XXX = No relief valve option (Use w/8sx option Relief Valve Adjustment Range: B = 45 -,6 PSI ( - 8 BAR) N =,75 -,9 PSI (8 - BAR) N is Standard Option R =,95-5,5 PSI ( - 38 BAR) X = No relief valve (used w/8sx option) INLET RELIEF VALVES V5-AB- N -5 V5 Valve Series Section Type: AB = Use with inlet and mid-section only Relief Valve Setting (in BAR): See setting options in Inlet Sections Relief Valve Adjustment Range: See RV adjustment range in Inlet Sections SPRING CODE B N R Standard Settings,6 PSI (8 Bar),75 PSI (5 BAR) 3, PSI ( BAR) MID SECTIONS V5 Valve Series Section Type: B = Mid-section Port Size & Type: FM = - SAE top and side V5- B - FM- E53- N -5 Relief Valve Setting: See setting options in Inlet Sections Relief Valve Adjustment Range: See RV adjustment range in Inlet Sections Mid-section Type: E5 = Split flow mid-outlet* E53 = Combined flow mid-inlet with RV *Split flow mid-outlet utilize inlet sections on the valve assembly, and the mid-outlet acts as the outlet for each inlet OUTLETS V5 Valve Series Section Type: C = Outlet Port Size & Type: FL = -8 SAE top x - SAE end FC = -8 SAE top & end (use w/power beyond option 6DX) V5- C-FL-3DX-XXX Additional Outlet Options: XXX = No options Outlet Type: 3DX = Standard outlet 6DX = Outlet with power beyond (Part number for power beyond sleeve only: V5-C-PBS-4)

6 MODEL NUMBER CONSTRUCTION WORK SECTIONS V5-A B -AA- FC- -X V5 Valve Series Spool Type: AB = 3P3W, Single acting cylinder, pressure out B port AC = 3P4W, double acting cylinder AJ = 3P4W, bi-rotational motor AM = 4P4W, double acting cylinder w/float (4th position detent) Control Type: AA = Handle control actuator (handle not included)* AB = Lever cap for float spool AM (handle not included)* AE = Spool cover for Back-Cap controls AJ = Spool eye only for direct connection BG = Low pressure hydraulic control Back-cap Positioners & Controls: = No Back-Cap, used with BG control = 3 position, spring return 6 = Detent spool IN, Spring spool OUT 7 = Detent spool OUT, Spring spool IN 8 = 3 position detent = 3 position, spring return w/4th position detent 33 = Pneumatic positioning (on/off or proportional) 35 = On/Off (bang-bang) V electrical control for single acting spool (use w/spool code AB)** 36 = On/Off (bang-bang) V electrical control for double acting spool (use w/spool code AC)** 37 = On/Off (bang-bang) V electrical control for motor ` spool (use w/spool code AJ)** Special Features: X = No option (standard) Work Port Options: = Machined w/steel plugs (standard) RV PSI (7 BAR) adjustable from 435-,6 PSI (3-8 BAR) 3 = RV on A port, set at, PSI (7 BAR) 4 = RV on B port, set at, PSI (7 BAR) 5 = RV on A & B port, set at, PSI (7 BAR) RV PSI (5 BAR) adjustable from,75-,9 PSI (8- BAR) 4 = RV on A port, set at,8 PSI (5 BAR) 5 = RV on B port, set at,8 PSI (5 BAR) 6 = RV on A & B port, set at,8 PSI (5 BAR) Anti-cavitation Valves = Anti-cav on A port = Anti-cav on B port 3 = Anti-cav on A & B port Note: Additional port accessory valve options available on request, lead times may apply) Port Type FC = -8 SAE * Handle kit to be ordered separately Standard handle kit P/N: VLVH-B-64 Length: 6.5" (64mm) ** Option recommended control type is AA other options are AJ or AE STUD KITS V5 Valve Series T = Tie Rod V5-T- Number of Work Sections - (- Work Sections) L Note: Torque to lb.ft (3 Nm) NO. OF WORK SECTIONS L (in/mm) 4.59 / / / / / / / / / / 485.5

7 WORK PORT OPTIONS W3 RELIEF VALVE W33 R.V. + ANTI-CAV VALVE (Pilot Operated RV + Anti-Cav) W4 ANTI-CAV VALVE WCX STEEL PLUG V5 Valve Series Work Port Option: W3 = Work Port RV W33 = Work Port RV + Anti-Cav W4 = Work Port Anti-Cav Only WCX = Blanking Plug Setting Range: See RV adjustment range in inlet sections X = No range, used w/ W4 or WCX) V5-W3- N - 5 Relief Valve Setting (in BAR): Standard Settings: 35 = 5 PSI 7 =, PSI 5 =,8 PSI 5 =,75 PSI 7 =,5 PSI = 3, PSI XXX = No Setting, used w/w4 & WCX ORDER EXAMPLE PART NUMBER QTY. DESCRIPTION If you would like to order an assembled valve, you will need to order each item separately. The order in which parts are entered is how the valve will be built from left to right. On the right is an example of a 3 work section valve order: V5-A-FM-7SX-N5 Inlet with relief valve V5-AJ-AA--FC--X Work section & V5-AC-AJ--FC-5-X Work section 3 VLVH-B (64mm) handle kits for WS & V5-C-FL-3DX-XXX Standard outlet V5-T3 Stud kit for 3 section assembly

8 A Member of the Interpump Group MP6-9 (Rev. 9-8) East Jackson Street Muncie, Indiana Fax Specifications are subject to change without notice. Visit for warranties and literature. All rights reserved. Muncie Power Products, Inc. (6)

V250 SERIES DIRECTIONAL CONTROL VALVES

V250 SERIES DIRECTIONAL CONTROL VALVES V SERIES DIRECTIONAL CONTROL VALVES TAKE CONTROL OF YOUR HYDRAULICS Take control with Muncie Power Products V directional control valve. The V is constructed with high-grade iron castings and nickel-plated

More information

General Valve Assembly Information

General Valve Assembly Information General Assembly Information Open-Center Directional Control Valves General Valve Assembly Information The Basics Every valve has the following elements: Inlet Main relief Work sections Outlet Section

More information

MJ SERIES LOW SPEED HIGH TORQUE MOTORS

MJ SERIES LOW SPEED HIGH TORQUE MOTORS MJ SERIES LOW SPEED HIGH TORQUE MOTORS HIGH EFFICIENCY TORQUE MOTORS The MJ Series Low Speed High Torque Motor is available in 10 displacement sizes. The MJ Series motor is constructed using heavy-duty

More information

V130 Service Parts. Back Cap & Control Kits

V130 Service Parts. Back Cap & Control Kits V130 Service Parts Back Cap & Control Kits V130 Series Back-Cap Kit 3 Position Spring Return V130-BC-01 Item 3: Item 5: Apply multi-purpose grease prior to spring assembly Clean the threads on item 5 and

More information

LOGGING/FORESTRY PRODUCT OVERVIEW POWER TAKE-OFFS AND HYDRAULIC COMPONENTS

LOGGING/FORESTRY PRODUCT OVERVIEW POWER TAKE-OFFS AND HYDRAULIC COMPONENTS LOGGING/FORESTRY PRODUCT OVERVIEW POWER TAKE-OFFS AND HYDRAULIC COMPONENTS Muncie Power Products, Inc. is a proud manufacturer of power take-offs and fluid power components for applications within the

More information

Service and Parts Manual. Minimum Filtration Required:

Service and Parts Manual. Minimum Filtration Required: R GRESEN Hydraulics Model V0 Sectional Body Directional Control Valve Service and Parts Manual Maximum Operating Pressure: Minimum Filtration Required: 00 PSI ( bar) 0 Micron The information in this Service

More information

NV452 Monoblock directional control valve

NV452 Monoblock directional control valve NV452 Monoblock directional control valve Product Features General Specifications Order Coding Open Center Load Sense Performance Data Inlet Options Spool Positioners Spool Options Auxilary Valves Lever

More information

Contents. Directional Control Valve 3 Series CV 452. Page 3-4. General Information. Page 5. Technical data. Page 6. Performance Curves.

Contents. Directional Control Valve 3 Series CV 452. Page 3-4. General Information. Page 5. Technical data. Page 6. Performance Curves. Contents Page 3-4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 General Information Technical data Performance Curves Dimensions - Basics Valve Dimensions - LS Valve Secondary

More information

Monoblock Directional Control Valve PMB22TSTSAB PMB23TSTSTSLB PMB21TDLB

Monoblock Directional Control Valve PMB22TSTSAB PMB23TSTSTSLB PMB21TDLB Engineering & Manufacturing Solutions Specifications: FLOW RATINGS: - MB21 & MB22 10 gpm (38 lpm) - MB23 8 gpm (30 lpm) Rated up to 4000 psi (275 bar). Port Sizes: - Inlet/Outlet #8 SAE. -Work Ports #8

More information

Directional Control Valve CV550

Directional Control Valve CV550 www.nimco-controls.com Directional Control Valve CV550 Smart Solutions... for the Future Contents Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 16 Page 17 Page 18 Page

More information

LOAD SENSE SECTIONS. Series 20. Directional Control Valves NEED NEW PIC VALVES STANDARD FEATURES SPECIFICATIONS

LOAD SENSE SECTIONS. Series 20. Directional Control Valves NEED NEW PIC VALVES STANDARD FEATURES SPECIFICATIONS Directional Control Valves LOAD SENSE SECTIONS NEED NEW PIC Series 20 STANDARD FEATURES Control and reduced Dead Band (20I) and Tie Rod Kits SPECIFICATIONS Pressure Rating Foot Mounting Maximum Operating

More information

60VSERIES PFD-30 MSV-16 RV-30, RV-60. Muncie Power Products MP95-08 (Rev. 5-05) Printed in the U.S.A. Muncie Power Products, Inc VALVE WARRANTY

60VSERIES PFD-30 MSV-16 RV-30, RV-60. Muncie Power Products MP95-08 (Rev. 5-05) Printed in the U.S.A. Muncie Power Products, Inc VALVE WARRANTY VALVE WARRANTY The Muncie 60V Series Valve is warranted against any defect in material and workmanship which existed at the time of sale by Muncie, according to the following provisions, subject to the

More information

-Technical data... 2/14 -Circuit mode... 2/14 -Dimensions RP /14

-Technical data... 2/14 -Circuit mode... 2/14 -Dimensions RP /14 Auxiliary valves Document: SCV-1-June 2013 Lever Spool positioner Check valve Spool CONTENTS: Page -Technical data... 2/14 -Circuit mode... 2/14 -Dimensions... 3/14 -Dimensions... 4/14 -Lever mechanism...

More information

17 SERIES DIRECTIONAL CONTROL VALVE

17 SERIES DIRECTIONAL CONTROL VALVE 17 SERIES DIRECTIONAL CONTROL VALVE 17 GPM (65 LPM) 3,500 PSI (242 Bar) Sectional Type Solenoid Operated Muncie s 17 Series solenoid operated control valves provide flexibility you have never had before.

More information

Auxiliary valves. Lever. Spool positioner Check valve Spool

Auxiliary valves. Lever. Spool positioner Check valve Spool Auxiliary valves Lever Spool positioner Check valve Spool CONTENTS: Page -Technical data... 1 -Dimensions RP80... 2 -Dimensions RP60... 3 -Lever mechanism... 4 -Spools/spool control... 5 -Inlet cover/outlet

More information

SECTION A FRONT END LOADER VALVES

SECTION A FRONT END LOADER VALVES NB: models, Codes and Specifications may be subject to change without notice. SECTION A FRONT END LOADER VALVES Valve Series Nominal PAGE WALVOIL FRONT-END LOADER VALVES SDM102 Series... 45L/Min... A 14

More information

4-Way Directional Control Valve With Hydraulic Kick Out

4-Way Directional Control Valve With Hydraulic Kick Out Engineering & Manufacturing Solutions 4-Way Directional Control Valve With Hydraulic Kick Out Specifications: Rated for 0-18 gpm (0-68.1 lpm) Rated for 3000 psi (207 bar) Weighs 5-1/2 lbs. (2.5 kg) 30

More information

Contents. Directional Control Valve 2 Series CV Unibody. Page 3-4. General Information. Page 5. Technical data. Page 6. Performance Curves

Contents. Directional Control Valve 2 Series CV Unibody. Page 3-4. General Information. Page 5. Technical data. Page 6. Performance Curves Contents Page 3-4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11-12 Page 13 Page 14 Page 15 General Information Technical data Performance Curves Dimensions - Basic Valve Dimensions - Unibody Secondary

More information

4-Way Directional Control With Pressure Compensated Flow Control PSDCF120M64LF Specifications:

4-Way Directional Control With Pressure Compensated Flow Control PSDCF120M64LF Specifications: Engineering & Manufacturing Solutions With Pressure Compensated Flow Control Specifications: Rated for 0-18 gpm (0-68.1 lpm) Rated for 3000 psi (207 bar) Weighs 6-1/2 lbs. (2.9 kg) 30 Micron filtration

More information

MONOBLOCK DIRECTIONAL CONTROL VALVES

MONOBLOCK DIRECTIONAL CONTROL VALVES MONOBLOCK DIRECTIONAL CONTROL VALVES CONTENTS: RM0...... RM5...... RM40P...... RM80...... RMD90...... MRP70... Page 1/19&/19 /19...5/19 6/19...10/19 11/19...15/19 16/19&17/19 18/19&19/19 MONOBLOCK DIRECTIONAL

More information

Contents. Directional Control Valve 2 Series CV 300

Contents. Directional Control Valve 2 Series CV 300 Contents Page 3 General Information Page 4 Technical data Page 5 Dimensions Page 6 Secondary Valves Page 7 Cylinder port mounted secondary valves Page8 Spool - Control characteristics Page 9-10 Spool Controls

More information

Available manual, pneumatic, and hydraulic spool control kits.

Available manual, pneumatic, and hydraulic spool control kits. Fitted with a main pressure relief valve and a load check valve on every working section. Available with parallel circuit. Optional carry-over Variety of port valves (auxiliary valves) Available manual,

More information

Commercial Shearing (Pty) Ltd THE WORLDWIDE PROGRAM OF VALVES ISO 9001

Commercial Shearing (Pty) Ltd THE WORLDWIDE PROGRAM OF VALVES ISO 9001 Commercial Shearing (Pty) Ltd THE WORLDWIDE PROGRAM OF VALVES ISO 9001 An Insight into Valve Technology CLEAN ROOM ASSEMBLY AND TEST A major investment has been made in a clean-room assembly and test environment.

More information

Series 34. Sectional Directional Control Valve Specifications: P34A Engineering & Manufacturing Solutions

Series 34. Sectional Directional Control Valve Specifications: P34A Engineering & Manufacturing Solutions Engineering & Manufacturing Solutions Specifications: 12 gpm (45.4 lpm) Nominal Capacity (see flow chart). 3500 psi (241 bar). 400 psi (27 bar) max tank pressure. 12 sections max (consult factory for more).

More information

90VSERIES DIRECTIONAL CONTROL VALVE MSV-16 RV-30, RV-60 PFD-30

90VSERIES DIRECTIONAL CONTROL VALVE MSV-16 RV-30, RV-60 PFD-30 MP95-09.90VSerValve.qxp:*MP95-09.90VSerValve v5 8/11/08 10:27 AM Page 12 VALVE WARRANTY The Muncie 90V Series Valve is warranted against any defect in material and workmanship which existed at the time

More information

Monobloc and Sectional Directional Control Valves

Monobloc and Sectional Directional Control Valves Monobloc and Sectional Directional Control Valves motion and progress 1/220 6 Monobloc directional control valves Contents 6.1 General specifications 66 6.2 Dimensional data 67 6.3 Performances curves

More information

HYDRAULICS VINCKE DIRECTIONAL CONTROL VALVES

HYDRAULICS VINCKE DIRECTIONAL CONTROL VALVES VINCKE DIRECTIONAL CONTROL VALVES TECH-DCV200.1 index 3 link to your page / link a su página Monoblock hydraulic distributors Monoblock hydraulic distributors 35 liters 3 P35 Monoblock hydraulic directional

More information

ORV-M45. Contents. Additional Informations

ORV-M45. Contents. Additional Informations Contents Working Conditions 3 Dimensional Data 4 Hydraulic Circuit 5 Performance Data And Curve 7 Inlet Relief Options 8 Ordering Codes 9 Spool Options 11 Spool Positioners Side of Return 14 Spool Positioners

More information

DC Series. 4-Way Directional Control Valve With Or Without Flow Control PDC16T4PBS PDCF16TM454LF

DC Series. 4-Way Directional Control Valve With Or Without Flow Control PDC16T4PBS PDCF16TM454LF Engineering & Manufacturing Solutions Specifications: Rated for 0-45 gpm (0-170 lpm) Rated for 3000 psi (207 bar) Std. port sizes (Consult factory for others) - 3/4 NPT all ports - #16 SAE (1-5/16-12)

More information

Directional Control Valves

Directional Control Valves Overview HYDAC offers several functions of the Directional Control Cartridges. HYDAC Manually operated position, - way normally closed, spring return, directional valve features poppet design. It offers

More information

Eaton. Revised April, Directional Control Valves. Model 30540, 15 GPM Directional Control Valves. We Manufacture. Solutions

Eaton. Revised April, Directional Control Valves. Model 30540, 15 GPM Directional Control Valves. We Manufacture. Solutions s Eaton Revised April, 1996 c Directional Control Valves h i y d l ydraulics r a u u l c a i d r s Model 354, 15 GPM Directional Control Valves Solutions y We Manufacture H S o l u t i o n s Model 354

More information

Section 1-7. Nominal Flow 50 lpm 13 US gpm. Threads G3/8 (Standard) SAE8

Section 1-7. Nominal Flow 50 lpm 13 US gpm. Threads G3/8 (Standard) SAE8 Valve is equipped with an adjustable main relief valve, available in parallel circuit, wide range of spool options and positioners, interchangable spools Manual and remote cable Section 1 Weight 2,1 kg

More information

MINING FORESTRY MOBILE TRUCK AGRICULTURE MATERIAL HANDLING OPTIMUM

MINING FORESTRY MOBILE TRUCK AGRICULTURE MATERIAL HANDLING OPTIMUM MINING FORESTRY MOBILE TRUCK AGRICULTURE MATERIAL HANDLING OPTIMUM Muncie Power Products OPTIMUM Series gear pumps/motors offer premier performance for a wide variety of applications across several industries.

More information

Monoblock directional control valves DL - Directional control valve

Monoblock directional control valves DL - Directional control valve Monoblock directional control valves DL - Directional control valve DL Before use, carefully read the GENERAL INSRUCIONS FOR USE OF DIRECIONAL CONROL VALVES 398SMD008I00-06-2-208 DL echnical data Nominal

More information

CABLE TIPPING VALVE. Tipping valve type Order code IN TANK OUT Weight HYDRAULICS VALVES 2.2 FM-45 CE G 1/2 G 1/2 G 1/2.

CABLE TIPPING VALVE. Tipping valve type Order code IN TANK OUT Weight HYDRAULICS VALVES 2.2 FM-45 CE G 1/2 G 1/2 G 1/2. CABLE TIPPING VALVE Optional Mechanical tipping valve operated by cable controls series LINEA or LINEA BLOCK to suit light duty tipper trucks. Open centre hydraulic scheme according to CE standards. -

More information

Spreader Valves SPR-2FFL12, SPR-2FFLC12 & SPR-2FFLW86

Spreader Valves SPR-2FFL12, SPR-2FFLC12 & SPR-2FFLW86 Spreader Valves, & SCHEMATIC MODEL PRESSURE FLOW* WEIGHT Quick Reference Page 3 Spreader Valve, Dual Flow Regulation, Compensated, Manual Dump, Gear Pump Circuit 138 bar [2000 psi] [30 US g/m] 2.62 kg

More information

Contents. Quality Hydraulic Components from the Webtec Range. Introduction. Hydraulic Flow Control Valves

Contents. Quality Hydraulic Components from the Webtec Range. Introduction. Hydraulic Flow Control Valves Quality Hydraulic Components from the Webtec Range Contents Description Section Webtec Products Ltd Introduction 1 Hydraulic Flow Control Valves 2 Hydraulic Directional Control Valves and Check Valves

More information

Monoblock Directional Control Valve RM 230

Monoblock Directional Control Valve RM 230 Monoblock Directional Control Valve RM 230 Key valve features RM 230 light is a monoblock valve, designed for max. operating pressures up to 3,000 psi (210 bar) and typ. pump flows up to 20 gpm (70 Lpm).

More information

COMPACT CATALOGUE SECTIONAL DIRECTIONAL CONTROL VALVES

COMPACT CATALOGUE SECTIONAL DIRECTIONAL CONTROL VALVES COMAC CAALOGUE SECIONAL DIRECIONAL CONROL VALVES SDS5 Features Simple, compact and heavy duty designed sectional valve from to sections for open and closed centre hydraulic systems. H Fitted with a main

More information

Full Range Pressure Compensating Variable Flow Control

Full Range Pressure Compensating Variable Flow Control Engineering & Manufacturing Solutions Specifications: See flow chart for capacity. Rated for 3000 psi (207 bar). Weighs 7- ¾ lbs. (3.52 kg). 30-Micron Filtration Recommended. Torque to turn side lever

More information

CONTINENTAL HYDRAULICS VAD05M-VMD05M - AIR & LEVER OPERATED DIRECTIONAL VALVES

CONTINENTAL HYDRAULICS VAD05M-VMD05M - AIR & LEVER OPERATED DIRECTIONAL VALVES CONTINENTAL HYDRAULICS VAD05M-VMD05M AIR & LEVER OPERTAED DIRECTIONAL VALVES 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM VAD05M-VMD05M AIR & LEVER OPERATED

More information

SECTIONAL BODY. Model SV. Directional Control Valves VALVES STANDARD FEATURES SPECIFICATIONS. Parallel or Series Circuit Construction ...

SECTIONAL BODY. Model SV. Directional Control Valves VALVES STANDARD FEATURES SPECIFICATIONS. Parallel or Series Circuit Construction ... Directional Control Valves SECTIONAL BODY Model SV STANDARD FEATURES SPECIFICATIONS Parallel or Series Circuit Construction Foot Mounting Pressure Rating Maximum Operating Temp....... Weight Per Section......

More information

Solutions. ydraulics. We Manufacture. H y d r a u l i c s. Eaton. h y d r a u l i c s. Model 30540, 15 GPM Directional Control Valves

Solutions. ydraulics. We Manufacture. H y d r a u l i c s. Eaton. h y d r a u l i c s. Model 30540, 15 GPM Directional Control Valves h y d r a u l i c s H y d r a u l i c s ydraulics Eaton Directional Control Valves We Manufacture No. 11-56 Revised April, 1996 Model 354, 15 GPM Directional Control Valves Solutions S o l u t i o n s

More information

COMPACT CATALOGUE SECTIONAL DIRECTIONAL CONTROL VALVES

COMPACT CATALOGUE SECTIONAL DIRECTIONAL CONTROL VALVES COMAC CAALOGUE SECIONAL DIRECIONAL CONROL VALVES Features Simple, compact and heavy duty designed sectional valve from to sections for open and closed centre hydraulic systems. H Fitted with a main pressure

More information

STANDARD FEATURES. Flow Control Inlet

STANDARD FEATURES. Flow Control Inlet Directional Control Valves SECTIONAL BODY Model SV STANDARD FEATURES -0 Sections Per Valve Bank Differential Poppet Style Relief, Adjustable Load Checks On Each Section from 500 to 3000 psi (Also available

More information

V5 60 LPM SECTIONAL SPOOL VALVE

V5 60 LPM SECTIONAL SPOOL VALVE V5 60 LPM SECTIONAL SPOOL VALVE 37 V5 60 LPM SECTIONAL SPOOL VALVE Description A low profile sectional spool valve, lever, solenoid or cable operated. Suitable for open or closed centre circuits. Spool

More information

Muncie Power Products, Inc.

Muncie Power Products, Inc. EXTENDED SHAFT SERIES PARTS LIST AND SERVICE MANUAL CD10 SERIES EXTENDED SHAFT SERVICE PARTS LIST 1 1 11 1 6 8 9 10 CD10 LEFT SIDE ALLISON 000 ITEM QTY DESCRIPTION 9TA96A SAE-B 9TA97A DIN 6 9TA98A SAE-BB

More information

SECTIONAL BODY. Series 20. Directional Control Valves STANDARD FEATURES SPECIFICATIONS VALVES. Pressure Rating

SECTIONAL BODY. Series 20. Directional Control Valves STANDARD FEATURES SPECIFICATIONS VALVES. Pressure Rating Directional Control Valves SECTIONAL BODY Series 20 CATV 3-10-11-01 STANDARD FEATURES SPECIFICATIONS Parallel or Tandem Circuit Foot Mounting Pressure Rating Weight............... Nominal Flow Rating...

More information

36EFC. Series & EFC Valve Package

36EFC. Series & EFC Valve Package Engineering & Manufacturing Solutions Specifications: Rated for 0-24 gpm (0-91 lpm) depending on Series 36-38 work sections used. Pressure rating 3000 psi (207 bar). 10 Micron filtration recommended. See

More information

CLS180 Proportional Load Sensing Mobile Valve

CLS180 Proportional Load Sensing Mobile Valve Mobile valves Proportional Load Sensing, Model CLS180 350 bar 180 L/min Up to 10 sections Eaton Pro-FX TM Ready CLS180 Proportional Load Sensing Mobile Valve Overhaul manual / Trouble shooting guide Contents

More information

Proportional Directional Control Cartridge Valves: PSV10-34 & PSV12-34

Proportional Directional Control Cartridge Valves: PSV10-34 & PSV12-34 Control Cartridge Valves: PSV10-34 & PSV12-34 SCHEMATIC PRESSURE* FLOW CAVITY COIL Page 2 PSV10-34-02 250 BAR 3600 PSI 22 LPM 6 GPM SDC10-4 M16-26W R16-20W Page 4 PSV12-34-02 260 BAR 3770 PSI 50 LPM 13

More information

Delta Power Company 4484 Boeing Drive - Rockford, IL 61109

Delta Power Company 4484 Boeing Drive - Rockford, IL 61109 4484 Boeing Drive - Rockford, IL 6119 SECTION/Description Pages Logic Elements 4 Page 43 Page 44 4484 Boeing Drive - Rockford, IL 6119 Logic Elements GPM PSI LPM BAR MODEL PAGE 4 3 14 241 SL-PLA 46 4 3

More information

Hydraulic gear pumps and motors

Hydraulic gear pumps and motors PL 01 T E DISPLACEMENTS From To Hydraulic gear pumps and motors 0.07 in 3 /rev (1.07 cm 3 /rev) 5.56 in 3 /rev (91.10 cm 3 /rev) through bore aluminum body PRESSURE Max. Continuous Max. Intermittent Max.

More information

Pressure Control Valves

Pressure Control Valves Control Valves DR8- Reducing/Relieving, Direct Acting, Spool Type 4 gpm (5 l/min) 6 psi (4 bar) Description A screw-in cartridge, direct acting, spool type, pressure reducing/relieving valve with internal

More information

Solutions. ydraulics. We Manufacture. H y d r a u l i c s. Eaton Directional Control Valves. h y d r a u l i c s. Models and 31930

Solutions. ydraulics. We Manufacture. H y d r a u l i c s. Eaton Directional Control Valves. h y d r a u l i c s. Models and 31930 H y d r a u l i c s ydraulics Eaton Directional Control Valves h y d r a u l i c s Models 319 and 3193 with Pilot Operated Checks We Manufacture No. 11-5 March 1996 Solutions Directional Control Valves

More information

MP18 Stacking Valve System Technical Information Manual

MP18 Stacking Valve System Technical Information Manual Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service MP18 Stacking Valve System Technical Information Manual The Drive & Control Company Copyright 1996 Bosch

More information

Heavy Duty Hydrostatic Transmissions

Heavy Duty Hydrostatic Transmissions Heavy Duty Hydrostatic Transmissions Features and Benefits Typical Applications Construction Transit Mixer Road Roller Paver Motor Grader Loader Dozer Material Handling & Utility Crane Sweeper Lift Truck

More information

Monobloc and Sectional Directional Control Valves

Monobloc and Sectional Directional Control Valves Monobloc and Sectional Directional Control Valves 200 P 991210 E 03 / 10.04 1/220 2 Monobloc directional control valves HDM140 Contents 2.1 General specifications 9 2.2 Dimensional data 10 2.3 Performances

More information

HV SERIES. Manual/ Proportional Directional Valves HV9 HV39 HV18. EPHV39 Lever Actuated with Optional Proportional Control

HV SERIES. Manual/ Proportional Directional Valves HV9 HV39 HV18. EPHV39 Lever Actuated with Optional Proportional Control INDUSTRIL FLUID OWER COMONENTS ND SYSTEMS HV SERIES Manual/ roportional Directional Valves HV39 HV9 HV8 EHV39 Lever ctuated with Optional roportional Control 334 Friendship Drive, Magnolia, TX 77355 Tel.:

More information

HYDRAULIC CONTROL VALVES

HYDRAULIC CONTROL VALVES HYDRAULIC VALVES SECTION 3A HYDRAULIC CONTROL VALVES MONOBLOCK DIRECTIONAL CONTROL VALVES...71 SLICE DIRECTIONAL CONTROL VALVES...73 HANDLEVERS...76 S additions for valves...76 VALVE CONTROL KITS additions

More information

Heavy Duty Hydrostatic Transmissions

Heavy Duty Hydrostatic Transmissions Heavy Duty Hydrostatic Transmissions Features and Benefits Typical Applications Construction Transit Mixer Road Roller Paver Motor Grader Loader Dozer Material Handling & Utility Crane Sweeper Lift Truck

More information

Monobloc and Sectional Directional Control Valves

Monobloc and Sectional Directional Control Valves Monobloc and Sectional Directional Control Valves motion and progress 1/220 10 Sectional directional control valves HDS20 Contents 10.1 General specifications 177 10.2 Dimensional data 178 10.3 erformances

More information

DMH085** Series will be available January 1, Catalog HY /US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO.

DMH085** Series will be available January 1, Catalog HY /US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. Catalog HY-/US Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. /GPM BAR/PSI DL8... C8-... Position, Way, N.C. Poppet,... Pull to Open.../8... /... DL... C-... Position, Way, N.C. Poppet,... Pull

More information

F SERIES GEAR PUMP. 2 Muncie Power Products, Inc Muncie Power Products, Inc.

F SERIES GEAR PUMP. 2 Muncie Power Products, Inc Muncie Power Products, Inc. ALL NEW DESIGN F SERIES GEAR PUMP ALL NEW DESIGN Ultimate power and performance in a small package best describes the all new F Series gear pumps. Designed exclusively for those low flow applications.

More information

FR6Q PTO PARTS LIST AND SERVICE MANUAL. Muncie Power Products, Inc.

FR6Q PTO PARTS LIST AND SERVICE MANUAL. Muncie Power Products, Inc. FR6Q PTO PARTS LIST AND SERVICE MANUAL Muncie Power Products, Inc. MODEL NUMBER CONSTRUCTION FR6Q - F1 09-6 N X Model: FR6Q Ford 6-Bolt Quiet Transmission Gear: F1 Ford 6R10 Internal Gear Ratio: 09 0.90:1

More information

CLS100 Proportional Load Sensing Mobile Valve

CLS100 Proportional Load Sensing Mobile Valve Mobile Valves Proportional - Load Sensing Model CLS100 350 bar 100 L/min Up to 10 sections Eaton Pro-FX TM Compliant CLS100 Proportional Load Sensing Mobile Valve Overhaul manual / Trouble shooting guide

More information

Disc Valve Hydraulic Motors 4000 Compact Series

Disc Valve Hydraulic Motors 4000 Compact Series Disc Valve Hydraulic Motors 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Port B Port A Features Shuttle Valve with Back- Pressure Relief Valve Highlights

More information

SERIES 20 SECTIONAL DIRECTIONAL CONTROL VALVES INSTALLATION & USER GUIDE

SERIES 20 SECTIONAL DIRECTIONAL CONTROL VALVES INSTALLATION & USER GUIDE SERIES 20 SECTIONAL DIRECTIONAL CONTROL VALVES INSTALLATION & USER GUIDE SPECIFICATIONS: Rated for 0- gpm (0-23 lpm). Rated for 400 psi (301bar) parallel or 3000 psi (207 bar) series. Std. port sizes (consult

More information

MONOBLOCK DIRECTIONAL CONTROL VALVES

MONOBLOCK DIRECTIONAL CONTROL VALVES MONOBLOCK VALVE INDEX MONOBLOCK DIRECTIONAL CONTROL VALVES For mobile and industrial hydraulic applications. MA6 (6 GPM) General Specifications 4 Dimensions 5 Performance Chart 6 Ordering Code 7 MAV12

More information

VS6M - SOLENOID OPERATED DIRECTIONAL VALVES

VS6M - SOLENOID OPERATED DIRECTIONAL VALVES CONTINENTAL HYDRAULICS VS6M SOLENOID OPERATED DIRECTIONAL VALVES 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM VS6M SOLENOID OPERATED DIRECTIONAL VALVES

More information

COMPACT CATALOG MONOBLOCK DIRECTIONAL CONTROL VALVES

COMPACT CATALOG MONOBLOCK DIRECTIONAL CONTROL VALVES COMAC CAALOG MONOBLOCK DIRECIONAL CONROL VALVES SD4 Features Simple, compact designed, this valves is only one section for open center and closed center hydraulic systems. H Fittedwithamainpressurereliefvalve.

More information

Cartridge Valves Technical Information. Spreader Valves. Spreader Valves SCHEMATIC MODEL PRESSURE FLOW* WEIGHT SPR-2FFL12 SPR-2FFLC12 SPR-2FFLW86

Cartridge Valves Technical Information. Spreader Valves. Spreader Valves SCHEMATIC MODEL PRESSURE FLOW* WEIGHT SPR-2FFL12 SPR-2FFLC12 SPR-2FFLW86 SPR-2FFL12, SPR-2FFLC12 & SPR-2FFLW86 SCHEMATIC MODEL PRESSURE FLOW* WEIGHT Page 2 SPR-2FFL12 138 bar [2000 psi] [30 US g/m] 2.62 kg [5.90 lb] Spreader Valve, Dual Flow Regulation, Compensated, Manual

More information

Hydro M t HYDRAULIC VALVES SN-4.

Hydro M t HYDRAULIC VALVES SN-4. Hydro HYDRAULI VALVES A SRONG OMMIMEN O QUALIY Our concept is to sell and deliver the best quality of hydraulic valves, that fully meet our customer s rigorous requirements! o this end, our quality control

More information

FEATURES: APPLICATIONS:

FEATURES: APPLICATIONS: Ultimate power and performance in a small package best describes the all new F4 Series gear pumps. The pressure balanced bushing blocks and sleeve bearings provide both extra long life and high performance.

More information

Features: Applications: 12 standard sizes Pressures to 3625 PSI (250 Bar)

Features: Applications: 12 standard sizes Pressures to 3625 PSI (250 Bar) Ultimate power and performance in a small package best describes the all new F4 Series gear pumps. The pressure balanced bushing blocks and sleeve bearings provide both extra long life and high performance.

More information

Directional Control Valve

Directional Control Valve Directional Control Valve Service and Parts Manual powersolutions.danfoss.com Directional Control Valves Service and Parts Manual: Contents SERVICE PARTS Inlet cover... 3-4 Outlet cover... 5-6 Standard

More information

PRPM2-A. = 5.5 Nm (4.1 lb.-ft.) (qual. 8.8 Nm (6.5 lb.-ft.) for socket cap screws. = 50 Nm (36.9 lb.-ft.) for cartridges

PRPM2-A. = 5.5 Nm (4.1 lb.-ft.) (qual. 8.8 Nm (6.5 lb.-ft.) for socket cap screws. = 50 Nm (36.9 lb.-ft.) for cartridges Technical Information General Description proportional pressure reducing valves keep a constant pressure p red on the secondary, or regulated, side, independent of pressure fluctuations on the primary

More information

VIKING SG SERIES SEALLESS MAG DRIVE PUMPS

VIKING SG SERIES SEALLESS MAG DRIVE PUMPS SERIES SG-04, -05, -07, -0, -4 (Cast Iron) Section 34.3 Page 34.3. OPERATING RANGE: SG Pumps (Cast Iron Mag Drive) and SGN (Ductile Iron Mag Drive) Displacements No. 23 SG and 7 SGN 0.06 to 90 (SG) and

More information

Pressure Control Valves. General Description. Specifications. Ordering Information

Pressure Control Valves. General Description. Specifications. Ordering Information Catalog HY14-3000/US Technical Information Control Valves Series RCP General escription Series RCP in-line pressure control valves are chiefly used as remote control valves. They limit system pressure

More information

EFC. Electronically Adjustable Proportional Pressure Compensated Flow Control

EFC. Electronically Adjustable Proportional Pressure Compensated Flow Control Engineering & Manufacturing Solutions Specifications: See flow chart for capacity. 3000 psi (207 bar) rating. Weighs 8-1/2 lbs. (3.9 kg). Standard Port size #12SAE (1-1/16 12). 10-Micron Filtration Recommended.

More information

Solutions. Hydraulics. We Manufacture. H y d r a u l i c s. Eaton. h y d r a u l i c s. Models and with Pilot Operated Checks

Solutions. Hydraulics. We Manufacture. H y d r a u l i c s. Eaton. h y d r a u l i c s. Models and with Pilot Operated Checks H y d r a u l i c s Hydraulics Eaton Directional Control Valves h y d r a u l i c s Models 31520 and 31530 with Pilot Operated Checks We Manufacture No. 11-501 March 1991 Solutions S o l u t i o n s H

More information

ALUMINUM HIGH PERFORMANCE GEAR PUMPS

ALUMINUM HIGH PERFORMANCE GEAR PUMPS ALUMINUM HIGH PERFORMANCE GEAR PUMPS FEATURES EXTRUDED ALUMINUM DIE CAST BODY ALUMINUM MOUNTING FLANGE / COVER FLOATING AXLE SLEEVE AND DU BEARINGS DOUBLE LIP SHAFT SEAL TO PREVENT CAVITATION AND LEAKAGE

More information

Large Electronically Adjustable Proportional Pressure Compensated Flow Control Engineering & Manufacturing Solutions

Large Electronically Adjustable Proportional Pressure Compensated Flow Control Engineering & Manufacturing Solutions Engineering & Manufacturing Solutions LEFC Specifications: See flow chart for capacity. Max. 3000 psi cartridge input pressure. Nominally Rated for 3000 psi (207 bar). Tank Port - #4 SAE (10 psi (0.69

More information

MP18/SIC & SIO Stacking Valve System Technical Information Manual

MP18/SIC & SIO Stacking Valve System Technical Information Manual Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service MP18/SIC & SIO Stacking Valve System Technical Information Manual The Drive & Control Company Copyright

More information

Monobloc and Sectional Directional Control Valves

Monobloc and Sectional Directional Control Valves Monobloc and Sectional Directional Control Valves 200--991210-N-03/09.2015 03 / 10.04 1/220 11 Sectional directional control valves HDS30 Contents 11.1 General specifications 197 11.2 Dimensional data

More information

Disc Valve Hydraulic Motors Series 4000

Disc Valve Hydraulic Motors Series 4000 Disc Valve Hydraulic Motors Series 0 10.20 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.20 EN EATON_Motoren english Highlights Features 10 displacements, a variety of mounting flanges

More information

XCEL80 Steering Control Units

XCEL80 Steering Control Units XCEL80 Steering Control Units XCEL80 Steering Unit SEPECIFICATION DATA Max. System Pressure 175 bar [2537 psi] Max. Back Pressure 21 bar [305 psi] Rated Flow 75 LPM [20 GPM] Input Torque Powered 1.3-2.4

More information

VAD03M-VPD03M- VMD03M

VAD03M-VPD03M- VMD03M CONTINENTAL HYDRAULICS VAD03M-VPD03M- VMD03M AIR, HYDRAULIC, LEVER OPERATED DIRECTIONAL VALVES 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM PRECISE VAD03M-VPD03M-VMD03M

More information

MDT. Monoblock directional control valves MDT - Directional control valve

MDT. Monoblock directional control valves MDT - Directional control valve Monoblock directional control valves - Directional control valve efore use, carefully read the GENERL INSRUCIONS FOR USE OF DIRECIONL CONROL VLVES echnical data Nominal flow 35 l/min 9. US gpm Nominal

More information

PORT SIZE & TYPE HANDLE DET. RELEASE CA 1 1 A A A 0 (4) Complete handle assy.- "A" port end 2 2 B B B psi

PORT SIZE & TYPE HANDLE DET. RELEASE CA 1 1 A A A 0 (4) Complete handle assy.- A port end 2 2 B B B psi ORDERING INFORMATION MODEL NO. # OF SPOOLS SPOOL TYPE ACTUATOR OPTIONS RELIEF VALVE(6) PORT SIZE & TYPE HANDLE DET. RELEASE CA 1 1 A A A 0 (4) Manual CD Single 4-way, 3-position, open center 3 position

More information

STANDARD FEATURES. Flow Control Inlet

STANDARD FEATURES. Flow Control Inlet Directional Control Valves SECTIONAL BODY Model SV STANDARD FEATURES 1-10 Sections Per Valve Bank Differential Poppet Style Relief, Adjustable Load Checks On Each Section from 1500 to 3000 psi (Also available

More information

PRESSURE CONTROLS TECNORD

PRESSURE CONTROLS TECNORD Pressure Reducing / Relieving Valves GPM PSI LPM BAR MODEL PAGE 1 4 38 276 DF-PRP 174 2 3 76 27 SK-PRP 176 1 4 38 276 DF-PWP 178 Typical Schematic Typical application for the PRP and PWP is multi-system

More information

COMPACT CATALOG MONOBLOCK DIRECTIONAL CONTROL VALVES

COMPACT CATALOG MONOBLOCK DIRECTIONAL CONTROL VALVES COMAC CAALOG MONOBLOCK DIRECIONAL CONROL VALVES Features Simple, compact designed, this valve is only one section for open center and closed center hydraulic systems. H Fitted with a main pressure relief

More information

Post-Compensated Proportional Valve CV2000LS

Post-Compensated Proportional Valve CV2000LS www.nimco-controls.com Post-Compensated Proportional Valve CV2000LS Smart Solutions... for the Future Contents Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16

More information

SDS400. Sectional directional control valve

SDS400. Sectional directional control valve SDS4 Sectional directional control valve SDS4 Features Sectional directional control valve for high flow, available for fixed displacements hydraulic pumps. From to work sections Open centre Optional carry-over

More information

Microbore Hose, Assemblies & accessories

Microbore Hose, Assemblies & accessories bar DN2 and DN4 High pressure Microbore hose Technical data Microbore hose The microbore hose assembly, most commonly used to connect to a Minimess test point for pressure testing, has many other diverse

More information

Pilot Operated Pressure Relief Valve Series R5V (Denison)

Pilot Operated Pressure Relief Valve Series R5V (Denison) Characteristics Pilot operated pressure relief valves series R5V have a similar design to the subplate mounted R4V series. The SAE flanges allow to mount the valves directly on the outlet flanges of pumps

More information

6000 Series Highlights

6000 Series Highlights Highlights Features 9 displacements available Presents a multitude of options that make this motor very smart and flexible to apply Benefits Very tough motor for demanding applications Can be used in a

More information

Logic elements. Differential pressure sensing elements for applications up to 350 bar (5000 psi) and 400 L/min (100 USgpm)

Logic elements. Differential pressure sensing elements for applications up to 350 bar (5000 psi) and 400 L/min (100 USgpm) Hydraulic Screw-in Cartridge Valves (SiCV) Logic elements Differential pressure sensing elements for applications up to 50 bar (5000 psi) and 400 L/min (00 USgpm) Logic elements LOGC ELEMENTS... -4 APPLCATON

More information

SPUR GEAR PRODUCT LINE: CAST IRON PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE. Section 1451 Page 1451.

SPUR GEAR PRODUCT LINE: CAST IRON PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE. Section 1451 Page 1451. Page 1451.1 TABLE OF CONTENTS Features & Benefits...2 Typical Applications...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Component

More information