INSTALLATION DIMENSIONS
|
|
|
- Anissa Joseph
- 5 years ago
- Views:
Transcription
1 ACCESSORIES & OTHERS PRESURE GAGE INSTALLATION DIMENSIONS UNIT mm(inch) LM TYPE CBM TYPE CBM-F TYPE MODEL B B1 D D1 D2 G H T d R G40LM 28.1(0.86) φ48(1.9) φ41.7(1.6) 8(0.31) 58.7(2.31) 1/8" G40CBM 26(1.02) φ48(1.9) φ41.5(1.6) 43(1.69) 1/8" G50LM 32(1.26) φ57(2.2) φ53(2.1) 10.5(0.41) 76(3.0) 1/4" G50CBM 26(1.02) φ57(2.2) φ51(2.0) 48(1.9) 1/4" G60LM 32(1.26) φ71.5(2.8) φ63.5(2.5) 11(0.43) 88.5(3.48) 1/4" G60CBM 33(1.30) φ72(2.83) φ63.5(2.5) 55(2.16) 1/4" G60CBM-F 33(1.30) 6.7(0.26) φ87.5(3.4) φ72(2.8) 63(2.48) 55(2.16) 1/4" φ4.1(0.16) 80(3.15) G100LM 40(1.57) φ110(4.3) φ99(3.89) 14(0.55) 141(5.55) 1/2" G100CBM 36(1.41) φ110(4.3) φ98(3.86) 74(2.91) 1/2" G100CBM- 36(1.41) 7.5(0.29) φ131.8(5.1 φ110(4.3) φ98(3.85) 74(2.91) 1/2" φ5(0.19) 117(
2 ACCESORIES & OTHERS FILTRATION CARTS ) ) FEATURES Dirt indicator instructs when the filtering element needs replacement. No special tool needed for the change of element. Installed with 1/2 HP, 110/220VAC single phase motor for convenient plug-in application. Buggy is loaded on a portable hand-push cart, one unit can serve many stations. 10 micron and 25 micron element available for selection. With optional filter element (indicate: 10-W, when ordering), it can remove both dirt and water from system. APPLICATION PSI KGF/CM 2 To use periodically as a supplement filtration system for all hydraulic systems in the plant. To clean the hydraulic system before and after the periodical maintenance or repair. To fill the oil for a new hydraulic system. To reclaim the contaminated oil. PRESSURE DROP FLOW BY-PASS 1.76 KGF/CM 2 (25 PSI) LPM GPM HOW TO ORDER HFB W W: REMOVE DIRT AND WATER (ONLY AVAILABLE WITH 10 MICRON ELEMENT) OMITTED: REMOVE DIRT ONLY FLOW 20: 20 LPM (5.3 GPM) 40: 40 LPM (10.6 GPM) 10: 10 MICRON 25: 25 MICRON HIGH EFFICIENCY FILTRATION CARTS 1-89
3 PRESSURE CONTROLS MODULAR RELIEF VALVE MRF 02 SERIES SYMBOLS P T B A P T B A MRF-02P MRF-02A MRF-02B MRF-02D P T B MRF-02C A HOW TO ORDER MRF - 02 P - K DESIGN NUMBER PRESSURE ADJUSTMENT RANGE 1 : 8-70kgf/cm 2 ( PSI) 2 : kgf/cm 2 ( PSI) 3 : kgf/cm 2 ( PSI) ADJUSTMENT MODEL K : WITH KNOB NO CODE : WITHOUT KNOB FUNCTION CONTROLLED PORT P : P PORT A : A PORT B : B PORT C : A&B PORT VENTING TO TANK D : A&B PORT CROSS LINE RELIEF PORT SIZE 02 : 1/4" MODULAR RELIEF VALVE SPECIFICATIONS MAX. OPERATING PRESSURE 210 kgf/cm 2 (3000 PSI) MAX. FLOW CAPACITY 35 LPM (9.3 GPM) 2-1
4 2-2 PRESSURE CONTROLS MODULAR RELIEF VALVE MRF 02 SERIES
5 PRESSURE CONTROLS MODULAR RELIEF VALVE MRF 02 SERIES NO. DESCRIPTION SPEC. NO. DESCRIPTION SPEC. 7 O-RING M12 14 BACK-UP RING AS O-RING AS (70 o ) 18 O-RING AS (90 o ) 13 O-RING AS (70 o ) PERFORMANCE CURVES TEST FLUID VISCOSITY : 35 cst (175 SSU) NOMINAL OVERRIDE CHARACTERISTICS PRESSURE DROP MIN. ADJUSTMENT PRESSURE MIN. FLOW CHARACTERISTICS 2-3
6 PRESSURE CONTROLS MODULAR RELIEF VALVE MRF 02 SERIES INSTALLATION DIMENSIONS INSTALLATION DIMENSIONS MRF - 02A UNIT: mm (inch) WEIGHT: 1.5kgs (3.3 lbs) MRF - 02P/B
7 PRESSURE CONTROLS MODULAR RELIEF VALVE MRF 02 SERIES UNIT: mm(inch) WEIGHT: 1.7 kgs(3.75 lbs) MRF - 02C MRF - 02D
8
9 PRESSURE CONTROLS MODULAR PRESSURE REDUCING VALVE MPR 02 SERIES SYMBOLS MPR-02P MPR-02A MPR-02B HOW TO ORDER MPR - 02 P - K N NO CODE : GAUGE PORT PT THREADS N : GAUGE PORT NPT THREADS DESIGN NUMBER PRESSURE ADJUSTMENT RANGE 0 : kgf/cm 2 (20-500PSI) 1 : 8-70kgf/cm 2 ( PSI) 2 : kgf/cm 2 ( PSI) 3 : kgf/cm 2 ( PSI) ADJUSTMENT MODEL K: WITH KNOB NO CODE: WITHOUT KNOB FUNCTION CONTROL PORT P : P PORT A : A PORT B : B PORT PORT SIZE 02 : 1/4" MODULAR PRESSURE REDUCING VALVE SPECIFICATIONS MAX. OPERATING PRESSURE 210 kgf/cm 2 (3000 PSI) MAX. FLOW CAPACITY 35 LPM (9.3 GPM) 2-6
10 PRESSURE CONTROLS MODULAR PRESSURE REDUCING VALVE MPR 02 SERIES NO. DESCRIPTION SPEC. NO. DESCRIPTION SPEC. 10 O-RING P14(70 o ) 13 O-RING AS568-02(90 o ) 11 O-RING P22(90 o ) 14 O-RING P8(70 o ) 12 O-RING P20(90 o ) 18 BACK-UP RING P20 PERFORMANCE CURVES TEST FLUID VISCOSITY : 35 cst (175 SSU) TEST TEMPERATURE : 50 o C (122 o F) PRESSURE DROP PRESSURE DROP AT SPOOL FULLY OPENED MIN. ADJUSTMENT PRESSURE VS. MAX. FLOW 2-7
11 PRESSURE CONTROLS MODULAR PRESSURE REDUCING VALVE MPR 02 SERIES INSTALLATION DIMENSIONS MPR - 02B UNIT: mm(inch) WEIGHT: 1.2 kgs(2.65 lbs) MPR - 02P/A
12 FLOW CONTROLS MODULAR THROTTLE VALVE AND CHEK VALVE MT 02 SERIES SYMBOLS MT-02P MT-02T MT HOW - 02 TO P ORDER - K - 30 DESIGN NUMBER ADJUSTMENT MODEL K : WITH KNOB NO CODE : WITHOUT KNOB PRESSURE CONTROLLED PORT P : P PORT T : T PORT PORT SIZE 02 : 1/4" MODULAR THROTTLE VALVES SPECIFICATIONS MAX. OPERATING PRESSURE 210 kgf/cm 2 (3000 PSI) MAX. FLOW CAPACITY 35 LPM (9.3 GPM) 2-9
13 FLOW CONTROLS MODULAR THROTTLE VALVE AND CHEK VALVE MT 02 SERIES NO. DESCRIPTION SPEC. NO. DESCRIPTION SPEC. 2 O-RING P8(90 ) 6 O-RING AS (90 ) 4 O-RING P18(90 ) PERFORMANCE CURVES TEST FLUID VISCOSITY : 35 cst (175 SSU) TEST TEMPERATURE : 50 C (122 F) PRESSURE DROP FOR EACH PORT MT-02P METERED FLOW VS. DIAL POSITION PRESSURE DROP AT THROTTLE FULLY OPENED 2-10
14 FLOW CONTROLS MODULAR THROTTLE VALVE AND CHEK VALVE MT 02 SERIES INSTALLATION DIMENSIONS MT - 02P - K - 30 UNIT: mm(inch) WEIGHTS: 1.2 kgs(2.65 lbs) MT 02 K
15 FLOW CONTROLS MODULAR THROTTLE VALVE AND CHEK VALVE MT 02 SERIES SYMBOLS MT-02A MT-02B MT-02W MT-02A- I MT-02B-I MT-02W-I HOW TO ORDER MT - 02 W - K - I - 30 DESIGN NUMBER CONTROLLED MODEL I: METER IN NO CODE : METER OUT ADJUSTMENT MODEL K: WITH KNOB NO CODE : WITHOUT KNOB FUNCTION CONTROL PORT A : A PORT B : B PORT W : A&B PORT PORT SIZE 02 : 1/4" MODULAR THROTTLE AND CHECK VALVE SPECIFICATIONS 2-12
16 FLOW CONTROLS MODULAR THROTTLE VALVE AND CHEK VALVE MT 02 SERIES MAX. OPERATING PRESSURE 210 kgf/cm 2 (3000 PSI) MAX. FLOW CAPACITY 35 LPM (9.3 GPM) 2-13
17 FLOW CONTROLS MODULAR THROTTLE VALVE AND CHEK VALVE MT 02 SERIES NO. DESCRIPTION SPEC. NO. DESCRIPTION SPEC. 3 O-RING P8(90 ) 8 O-RING AS (90 ) 6 O-RING P18(90 ) 9 BACK-UP RING P8 PERFORMANCE CURVES TEST FLUID VISCOSITY : 35 cst (175 SSU) TEST TEMPERATURE : 50 C (122 F) PRESSURE DROP FOR FREE FLOW PRESSURE DROP PRESSURE DROP AT THROTTLE FULLY OPENED METERED FLOW VS. DIAL POSITION 2-14
18 FLOW CONTROLS MODULAR THROTTLE VALVE AND CHEK VALVE MT 02 SERIES INSTALLATION DIMENSIONS MT 02A UNIT: mm(inch) WEIGHT: 1.2 kgs(2.65 lbs) MT - 02B MT - 02W UNIT : mm(inch) WEIGHT: 1.4 kgs(3.1 lbs) 2-15
19 DIRECTIONAL CONTROLS MODULAR CHECK VALVE MC 02 SERIES SYMBOLS MC-02P MC-02T MC-02A MC-02B HOW TO ORDER MC - 02 P DESIGN NUMBER CRACKING PRESSURE 05 : 0.35kgf/cm 2 (7 PSI) 50 : 3.5kgf/cm 2 (50 PSI) FUNCTION CONTROLLED PORT P : P PORT A : A PORT B : B PORT T : T PORT PORT SIZE 02 : 1/4" MODULAR CHECK VALVE SPECIFICATIONS MAX. OPERATING PRESSURE 210 kgf/cm 2 (3000 PSI) MAX. FLOW CAPACITY 35 LPM (9.3 GPM) 2-16
20 DIRECTIONAL CONTROLS MODULAR CHECK VALVE MC 02 SERIES NO. DESCRIPTION SPEC. NO. DESCRIPTION SPEC. 5 O-RING P12.5(90 ) 7 O-RING AS (90 ) PERFORMANCE CURVES TEST FLUID VISCOSITY : 35 cst (175 SSU) TEST TEMPERATURE : 50 C (122 F) PRESSURE DROP FOR FREE FLOW PRESSURE DROP 2-17
21 DIRECTIONAL CONTROLS MODULAR CHECK VALVE MC 02 SERIES INSTALLATION DIMENSIONS MC - 02P UNIT: mm(inch) WEIGHT: 1.2 kgs(2.65 LBS) MC - 02T
22 DIRECTIONAL CONTROLS MODULAR CHECK VALVE MC 02 SERIES MC 02A UNIT: mm(inch) WEIGHT: 1.2 kgs(2.65 lbs) MC - 02B
23 DIRECTIONAL CONTROLS MODULAR PILOT CHECK VALVE MPC 02 SERIES SYMBOLS MPC-02A MPC-02B MPC-02W HOW TO ORDER MPC - 02 W - 30 DESIGN NUMBER FUNCTION CONTROLLED PORT A : A PORT B : B PORT W : A&B PORT PORT SIZE 02 : 1/4" MODULAR PILOT CHECK VALVE SPECIFICATIONS MAX. OPERATING PRESSURE 210 kgf/cm 2 (3000 PSI) MAX. FLOW CAPACITY 35 LPM (9.3 GPM) CRACKING PRESSURE IN FREE FLOW 0.6 kgf/cm 2 (8.5 PSI) PILOT RATIO 1 :
24 DIRECTIONAL CONTROLS MODULAR PILOT CHECK VALVE MPC 02 SERIES NO. DESCRIPTION SPEC. NO. DESCRIPTION SPEC. 6 O-RING AS (70 ) 9 BACK-UP RING AS O-RING AS (70 ) 10 O-RING AS (90 ) PERFORMANCE CURVES TEST FLUID VISCOSITY : 35 cst (175 SSU) TEST TEMPERATURE : 50 C (122 F) PRESSURE DROP FOR FREE FLOW MIN.PILOT PRESSURE INLET PRESSURE DROP (P2) FOR REVERSED CONTROLLED FLOW PRESSURE DROP PRESSURE DROP FOR REVERSED CONTROLLED FLOW MIN.PILOT PRESSURE 2-21
25 DIRECTIONAL CONTROLS MODULAR PILOT CHECK VALVE MPC 02 SERIES INSTALLATION DIMENSIONS MPC UNIT: mm(inch) WEIGHT: 1.1 kgs(2.43 LBS) 2-22
26 DIRECTIONAL CONTROLS MODULAR SOLENOID CHECK VALVE MSC 02 SERIES SYMBOLS MSC-02W- -NC- PERFORMANCE CURVES TEST FLUID VISCOSITY : 35 cst (175 SSU) TEST TEMPERATURE : 50 C (122 F) MSC-02A- -NC- PRESSURE DROP MSC-02B- -NC- HOW TO ORDER MSC - 02 W AP - NC - 10 OPTION 10: W/O MANUAL-OVERRIDE OPTION 20: W/I MANUAL-OVERRIDE OPTION VALVE CONFIGURATION NC: NORMALLY-CLOSED TERMINATIONS AP: 1/2" CONDUIT FOR AC COIL AG: DIN CONNECTOR FOR AC COIL DP: 1/2" CONDUIT FOR DC COIL DG: DIN CONNECTOR FOR DC COIL VALVE CONFIGURATION 12 : 12VDC 24 : 24VDC 115 : 115VAC 230 : 230VAC CONTROL SERIES W: A,B LINE A: A LINE B: B LINE NOMINAL SIZE 02: 1/4" MODULAR SOLENOID CHECK VALVE SPECIFICATIONS MAX. OPERATING PRESSURE 210 kgf/cm (3000 PSI) MAX. FLOW CAPACITY 30 LPM (8 GPM) 2-23
27 DIRECTIONAL CONTROLS MODULAR SOLENOID CHECK VALVE MSC 02 SERIES INSTALLATION DIMENSIONS MSC - 02W UNIT: mm(inch) MSC - 02A MSC - 02B
28 PRESSURE CONTROLS MODULAR RELIEF VALVE MRF 03 SERIES SYMBOLS P T B A P T B A MRF-03P MRF-03A MRF-03B MRF-03D P T B MRF-03C A HOW TO ORDER MRF - 03 P - K DESIGN NUMBER PRESSURE ADJUSTMENT RANGE 1 : 8-70kgf/cm 2 ( PSI) 2 : kgf/cm 2 ( PSI) 3 : kgf/cm 2 ( PSI) ADJUSTMENT MODEL K : WITH KNOW NO CODE : WITHOUT KNOB FUNCTION CONTROLLED PORT P : P PORT A : A PORT B : B PORT C : A&B PORT VENTING TO TANK D : A&B PORT CROSS LINE RELIEF PORT SIZE 03 : 3/8" MODULAR RELIEF VALVE SPECIFICATIONS MAX. OPERATING PRESSURE 210 kgf/cm 2 (3000 PSI) MAX. FLOW CAPACITY 70 LPM (20 GPM) 2-25
29 PRESSURE CONTROLS MODULAR RELIEF VALVE MRF 03 SERIES NO. DESCRIPTION SPEC. NO. DESCRIPTION SPEC. 2 O-RING G35(70 ) 11 O-RING P9(70 ) 7 O-RING P18(70 ) 16 O-RING AS (90 ) PERFORMANS CURVES TEST FLUID VISCOSITY : 35 cst (175 SSU) TEST TEMPERATURE : 50 C (122 F) NOMINAL OVERRIDE CHARACTERISTICS MIN. ADJUSTMENT PRESSURE 2-26
30 2-27 PRESSURE CONTROLS MODULAR RELIEF VALVE MRF 03 SERIES
31 PRESSURE CONTROLS MODULAR RELIEF VALVE MRF 03 SERIES INSTALLATION DIMENSIONS MRF-03P/A/B UNIT: mm(inch) WEIGHT :3.3kgs(7.28lbs) MRF - 03C WEIGHT: 3.7 kgs(8.16 lbs) 2-28
32 PRESSURE CONTROLS MODULAR RELIEF VALVE MRF 03 SERIES MRF - 03D
33 PRESSURE CONTROLS MODULAR PRESSURE REDUCING VALVE MPR 03 SERIES SYMBOLS MPR-03P MPR-03A MPR-03B HOW TO ORDER MPR - 03 P - K N NO CODE : GAUGE PORT PT THREADS N : GAUGE PORT NPT THREADS DESIGN NUMBER PRESSURE ADJUSTMENT RANGE 0 : 3-35kgf/cm 2 (40-500PSI) 1 : 8-70kgf/cm 2 ( PSI) 2 : kgf/cm 2 ( PSI) 3 : kgf/cm 2 ( PSI) ADJUSTMENT MODEL K : WITH KNOB NO CODE : WITHOUT KNOB FUNCTION CONTROLLED PORT P : P PORT A : A PORT B : B PORT PORT SIZE 03 : 3/8" MODULAR PRESSURE REDUCING VALVE SPECIFICATIONS MAX. OPERATING PRESSURE 210 kgf/cm2 (3000 PSI) MAX. FLOW CAPACITY 70 LPM (20 GPM) 2-30
34 PRESSURE CONTROLS MODULAR PRESSURE REDUCING VALVE MPR 03 SERIES 2-31
35 PRESSURE CONTROLS MODULAR PRESSURE REDUCING VALVE MPR 03 SERIES NO. DESCRIPTION SPEC. NO. DESCRIPTION SPEC. 2 O-RING G35(70 ) 11 O-RING P9(70 ) 7 O-RING P18(70 ) 15 O-RING AS (90 ) PERFORMANCE CURVES TEST FLUID VISCOSITY : 35 cst (175 SSU) TEST TEMPERATURE : 50 C (122 F) PILOT FLOW CHART PRESSURE DROP AT SPOOL FULLY OPENED (P-LINE) PRESSURE DROP 2-32
36 PRESSURE CONTROLS MODULAR PRESSURE REDUCING VALVE MPR 03 SERIES 2-33
37 PRESSURE CONTROLS MODULAR PRESSURE REDUCING VALVE MPR 03 SERIES INSTALLATION DIMENSIONS MPR UNIT: mm(inch) WEIGHT : 3.4kgs(7.50lbs) 2-34
38 FLOW CONTROLS MODULAR THROTTLE VALVE MT 03 SERIES SYMBOLS MT-03P MT-03T HOW TO ORDER MT - 03 P - K - 30 DESIGN NUMBER ADJUSTMENT MODEL K : WITH KNOB NO CODE : WITHOUT KNOB FUNCTION CONTROLLED PORT P : P PORT T : T PORT PORT SIZE 03 : 3/8" MODULAR THROTTLE VALVE SPECIFICATIONS MAX. OPERATING PRESSURE 210 kgf/cm 2 (3000 PSI) MAX. FLOW CAPACITY 70 LPM (20 GPM) 2-35
39 FLOW CONTROLS MODULAR THROTTLE VALVE MT 03 SERIES NO. DESCRIPTION SPEC. NO. DESCRIPTION SPEC. 2 O-RING P16(70 ) 5 BACK-UP RING P7 4 O-RING P7(70 ) 8 O-RING AS (90 ) PERFORMANCE CURVES TEST FLUID VISCOSITY : 35 cst (175 SSU) TEST TEMPERATURE : 50 o C(122 o F) PRESSURE DROP MT-03P METERED FLOW VS. DIAL PRESSURE DROP AT THROTTLE FULLY 2-36
40 2-37 FLOW CONTROLS MODULAR THROTTLE VALVE MT 03 SERIES
41 FLOW CONTROLS MODULAR THROTTLE VALVE MT 03 SERIES INSTALLATION DIMENSIONS MT - 03P K - 30 UNIT: mm(inch) WEIGHT :2.4kgs(5.29lbs) 2-38
42 FLOW CONTROLS MODULAR THROTTLE AND CHECK VALVE MT 03 SERIES SYMBOL MT-03A MT-03B MT-03W MT-03A-I MT-03B-I MT-03W-I MT HOW - 03 TO W ORDER - K - I - 30 DESIGN NUMBER CONTROLLED MODEL I : METER IN NO CODE : METER OUT ADJUSTMENT MODEL K : WITH KNOB NO CODE : WITHOUT KNOB FUNCTION CONTROLLED PORT A : A PORT B : B PORT W : A&B PORT PORT SIZE 03 : 3/8" MODULAR THROTTLE AND CHECK VALVE SPECIFICATIONS MAX. OPERATING PRESSURE 210 kgf/cm 2 (3000 PSI) MAX. FLOW CAPACITY 70 LPM (20 GPM) 2-39
43 FLOW CONTROLS MODULAR THROTTLE AND CHECK VALVE MT 03 SERIES NO. DESCRIPTION SPEC. NO. DESCRIPTION SPEC. 4 O-RING P10(70 ) 8 O-RING AS (90 ) 6 O-RING P16(70 ) PERFORMANCE CURVES TEST FLUID VISCOSITY : 35 cst (175 SSU) TEST TEMPERATURE : 50 C (122 F) PRESSURE DROP METERED FLOW VS. DIAL POSITION PRESSURE DROP FOR FREE FLOW PRESSURE DROP AT THROTTLE FULLY OPENED 2-40
44 FLOW CONTROLS MODULAR THROTTLE AND CHECK VALVE MT 03 SERIES INSTALLATION DIMENSIONS MT - 03W UNIT: mm(inch) WEIGHT: 2.8kgs(6.171lbs) MT - 03B WEIGHT: 2.4kgs(5.29lbs) MT - 03A WEIGHT: 2.4kgs(5.29lbs) 2-41
45 DIRECTIONAL CONTROLS MODULAR CHECK VALVE MC 03 SERIES SYMBOLS MC-03P MC-03T P T MC-03A B A MC-03B HOW TO ORDER MC - 03 P DESIGN NUMBER CRACKING PRESSURE 05 : 0.35kgf/cm 2 (5 PSI) 50 : 3.5kgf/cm 2 (50 PSI) FUNCTION CONTROLLED PORT P : P PORT A : A PORT B : B PORT T : T PORT PORT SIZE 03 : 3/8" MODULAR CHECK VALVE SPECIFICATIONS MAX. OPERATING PRESSURE 210 kgf/cm 2 (3000 PSI) MAX. FLOW CAPACITY 70 LPM (18.5 GPM) 2-42
46 DIRECTIONAL CONTROLS MODULAR CHECK VALVE MC 03 SERIES MC - 03P/T MC - 03A/B NO. DESCRIPTION SPEC. 5 O-RING P10(90 ) 6 O-RING AS (90 ) NO. DESCRIPTION SPEC. 2 O-RING P18(90 ) 7 O-RING AS (90 ) PERFORMANCE CURVES TEST FLUID VISCOSITY : 35 cst (175 SSU) TEST TEMPERATURE : 50 C (122 F) PRESSURE DROP FOR FREE FLOW PRESSURE DROP 2-43
47 DIRECTIONAL CONTROLS MODULAR CHECK VALVE MC 03 SERIES INSTALLATION DIMENSIONS MC - 03P/T UNIT: mm/(inch) WEIGHT: 2.3kgs(5.07lbs) MC - 03A/B
48 DIRECTIONAL CONTROLS MODULAR PILOT CHECK VALVE MPC 03 SERIES SYMBOLS MPC-03A MPC-03B MPC-03W HOW TO ORDER MPC - 03 W - 30 DESIGN NUMBER FUNCTION CONTROLLED PORT A : A PORT B : B PORT W : A&B PORT PORT SIZE 03 : 3/8" MODULAR PILOT CHECK VALVE SPECIFICATIONS MAX. OPERATING PRESSURE 210 kgf/cm 2 (3000 PSI) MAX. FLOW CAPACITY 70 LPM (18.5 GPM) CRACKING PRESSURE IN FREE FLOW 4 kgf/cm 2 (57 PSI) PILOT RATIO 1 :
49 DIRECTIONAL CONTROLS MODULAR PILOT CHECK VALVE MPC 03 SERIES NO. DESCRIPTION SPEC. 6 O-RING P18(90 ) 8 O-RING AS (90 ) PERFORMANCE CURVES TEST FLUID VISCOSITY : 35 cst (175 SSU) TEST TEMPERATURE : 50 C (122 F) PRESSURE DROP FOR FREE FLOW PRESSURE DROP FOR REVERSED CONTROLLED FLOW 2-46
50 DIRECTIONAL CONTROLS MODULAR PILOT CHECK VALVE MPC 03 SERIES INSTALLATION DIMENSIONS MPC UINT: mm/(inch) WEIGHT:2.7kgs(5.95lbs) 2-47
Pol Ind Les Comes C/Alemania, 43 Nave Igualada (Barcelona) Telf Fax
A B I N A Table of Content REMOTE CONTROL RELIEF VALVE... 1-1 DIRECT TYPE RELIEF VALVE... 1-3 SUBPLATE... 1-6 PILOT OPERATED RELIEF VALVE... 1-7 SUBPLATE...1-11 LOW NOISE TYPE PILOT OPERATED RELIEF VALVE...1-13
Pressure Control Valves Series R. General Description. Specifications. Flow Data
Catalog Y14-2502/US Technical Information Series R General Description Series R direct relief valves limit system pressure by opening to tank when system pressure reaches the valve setting. Specifications
Pressure Compensator Valves Series R5P (SAE Flange Mounted) General Description. Features
Technical Information General Description Series R5P direct operated, 3-way pressure compensators can be combined with any type of fixed or adjustable flow resistor (throttle) to provide a load compensated
Modular Throttle Valve MST MT MTC MCT Solenoid Operated Throttle Valve Throttle Valve Throttle and Check Valve Counter Restrictors Valve
Modular Throttle MST MT MTC MCT Solenoid Operated Throttle Throttle Throttle and Check Counter Restrictors Modular Relief MGS MBR MCB MRB MSV MRV Two Section Reducing Reducing Counter Balance Balance Sequence
DIRECTIONAL CONTROL VALVES CETOP3
DIRECTIONAL CONTROL VALVES CETOP3 GENERAL DESCRIPTION RH0...1-...F... Document: DCVC3-1-Aug 2013 4/3- and 4/2- way directional control valves with solenoid operation, heavy duty construction RH0...1-...F...
DIRECTIONAL CONTROL VALVES CETOP3
DIRECTIONAL CONTROL VALVES CETOP3 CONTENTS: RH06...1 - electrical control... RH06...2 - hydraulic control... Page 1/17...7/17 8/17...9/17 RH06...4 - mechanical control RH06...6 - pneumatic control......
Symbol RH F... GENERAL DESCRIPTION. 4/3- and 4/2- way directional control valves with solenoid operation, heavy duty construction
GENERAL DESCRIPTION List: RH06-1F-1-July 016 4/3- and 4/- way directional control valves with solenoid operation, heavy duty construction Removable AC and DC voltage coils-quick replacement and rotation
Large Electronically Adjustable Proportional Pressure Compensated Flow Control Engineering & Manufacturing Solutions
Engineering & Manufacturing Solutions LEFC Specifications: See flow chart for capacity. Max. 3000 psi cartridge input pressure. Nominally Rated for 3000 psi (207 bar). Tank Port - #4 SAE (10 psi (0.69
Pressure Control Valves. General Description. Specifications. Ordering Information
Catalog HY14-3000/US Technical Information Control Valves Series RCP General escription Series RCP in-line pressure control valves are chiefly used as remote control valves. They limit system pressure
Pilot Operated Pressure Relief Valve Series R5V (Denison)
Characteristics Pilot operated pressure relief valves series R5V have a similar design to the subplate mounted R4V series. The SAE flanges allow to mount the valves directly on the outlet flanges of pumps
Full Range Pressure Compensating Variable Flow Control
Engineering & Manufacturing Solutions Specifications: See flow chart for capacity. Rated for 3000 psi (207 bar). Weighs 7- ¾ lbs. (3.52 kg). 30-Micron Filtration Recommended. Torque to turn side lever
Vickers Pressure Relief Solenoid Operated, Two-Stage Directional Control Valve DG5S4-02 Flows to 115 l/min (30 USgpm) Pressure to 210 bar (3000 psi)
Vickers Pressure Relief Solenoid Operated, Two-Stage Directional Control Valve DG5S4-02 Flows to 115 l/min (30 USgpm) Pressure to 210 bar (3000 psi) Revised 2/93 GB C 2037 Table of Contents Model Code...................................................................................................
DOUBLE, P.O. CHECK VALVES (PRE-ENGINEERED BLOCKS)
DOUBLE, P.O. CHECK VALVES (PRE-ENGINEERED BLOCKS) SERIES DOUBLE PILOT OPERATED CHECK VALVE... HS3 Page HD1 Page HD2 SERIES DOUBLE PILOT OPERATED CHECK VALVE GPM PSI LPM BAR CAVITY MODEL PAGE 5 3500 19
GPM PSI LPM BAR MODEL CAVITY PAGE IF-S3A special IF-S3D special IG-S4A special 198
Transmission & Brake Spool Valves Screw-in style GPM PSI LPM BAR MODEL CAVITY PAGE 2 1000 8 70 TC-S3A 5/8-18 186 6 1000 23 70 TF-S3A 7/8-14 188 6 1000 23 70 TF-S3D 7/8-14 190 5 1000 20 70 TG-S4A 7/8-14
PILOT OPERATED PRESSURE CONTROLS - FLANGED TYPE VR5 Series
PILOT OPERTED PRESSURE CONTROLS FLNGED TPE VR5 Series Veljan Flanged type, Valves Series VR5V ( Relief ), VR5U (Unloader) and VR5S (Sequence ) are pilot controls. These range of valves are suitable for
Cartridge Valves Technical Information Directional Valves DCV 03
OVERVIEW DCV 03 directional control valves consist of: housing (1), control spool (5), with two centering springs (4), and cylindrical operating solenoids (2, 3). The three-position directional valves
D05 Directional Control Valves
Engineering D05 Directional Control Valves WFDG4S*4-01, 60 Design Wet Armature Solenoid Operated Max Pressure up to 248 Bar (3600 psi) Same Day Shipments www.fluidynefp.com Table of Contents Basic Characteristicts...2
Modular Valves. Ratings
High Pressure, High Flow Rate Features Installation and mounting space can be minimized. No special skill is required for assembly and any addition or alternation of the hydraulic circuit can be made quickly
PRESSURE CONTROLS TECNORD
Pressure Reducing / Relieving Valves GPM PSI LPM BAR MODEL PAGE 1 4 38 276 DF-PRP 174 2 3 76 27 SK-PRP 176 1 4 38 276 DF-PWP 178 Typical Schematic Typical application for the PRP and PWP is multi-system
Available manual, pneumatic, and hydraulic spool control kits.
Fitted with a main pressure relief valve and a load check valve on every working section. Available with parallel circuit. Optional carry-over Variety of port valves (auxiliary valves) Available manual,
P.C. Priority Flow Control Valve Series J02D3. General Description
CV Catalog HY15-352/US General Description Needle Type, Compensated Regulator Valve. For additional information see Tips on pages 1-4. P.C. Priority Control Valve Series J2D3 Features Good adjustment from
Hydraulic Screw-in Cartridge Valves (SiCV) Proportional valves Proportional solenoid valves for pressure and flow control
Hydraulic Screw-in Cartridge Valves (SiCV) Proportional valves Proportional solenoid valves for pressure and flow control Proportional valves PROPORTIONAL VALVES... - PFRH... -8 EPV...- EPV6...- EPV6A...-7
PRPM2-A. = 5.5 Nm (4.1 lb.-ft.) (qual. 8.8 Nm (6.5 lb.-ft.) for socket cap screws. = 50 Nm (36.9 lb.-ft.) for cartridges
Technical Information General Description proportional pressure reducing valves keep a constant pressure p red on the secondary, or regulated, side, independent of pressure fluctuations on the primary
VSD*S -MONITORED DIRECTIONAL CONTROL VALVES
CONTINENTAL HYDRAULICS VSD*S MONITORED DIRECTIONAL CONTROL VALVES 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM VSD*S MONITORED DIRECTIONAL CONTROL VALVES
D07 & D08. Series 35 Solenoid Valves D07 D Friendship Drive, Magnolia, TX Tel.: Fax:
GENERL FEURES SNDRD FEURES High ressure/ High Flow: 65 gpm/ psi ilot Operation: Main spool controlled by D0 solenoid pilot valve- allows for addition of modular valves to reduce shifting shock. Oil Immersed,
Type C2 Seat Type Solenoid Pilot Valve
Type C Seat Type Solenoid Pilot Valve JIS graphic symbols for hydraulic system T eatures No hydraulic locking occurs even during long periods of pressurized operation Nomenclature 1 3 5 - - - - - 1 3 5
PVX-11 VANE PUMPS. See pages 12 thru 14 for PVX-11 dimensions. VARIABLE DISPLACEMENT, PRESSURE COMPENSATED PERFORMANCE SPECIFICATIONS
PVX-11 VANE PUMPS VARIABLE DISPLACEMENT, COMPENSATED NOTE: See pages thru 14 for PVX-11 dimensions. PERFORMANCE SPECIFICATIONS Displacement (Nominal) 1.5 in 3 /rev. (25 cm 3 /rev.) Displacement (Actual)
Série D3 Válvula Direcional CETOP 5 e NG 10. Catálogo HY /US
Série D3 Válvula Direcional CETOP 5 e NG 10 Catálogo HY14-2502/US Catalog HY14-2502/US Introduction pplication Series D3 hydraulic directional control valves are high performance, direct operated 4-way
36EFC. Series & EFC Valve Package
Engineering & Manufacturing Solutions Specifications: Rated for 0-24 gpm (0-91 lpm) depending on Series 36-38 work sections used. Pressure rating 3000 psi (207 bar). 10 Micron filtration recommended. See
General Specifications DRV DRV-Exm DRV-Exd
direct operated, 3-way pressure reducing valve Q max = 8 l/min pressure range = - 5 bar body stainless steel (optional) Description The proportional pressure reducing valve (3-way function) is used to
Chapter 10: Valves for Pipe Mounting
Contents Chapter : Valves for Pipe Mounting Series Description Size Body Page DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 1¼ 1½ 2 L-port T-port Pressure valves, manual operation R4V R4R Pressure relief function Pressure
Delta Power Company 4484 Boeing Drive - Rockford, IL 61109
4484 Boeing Drive - Rockford, IL 6119 SECTION/Description Pages Logic Elements 4 Page 43 Page 44 4484 Boeing Drive - Rockford, IL 6119 Logic Elements GPM PSI LPM BAR MODEL PAGE 4 3 14 241 SL-PLA 46 4 3
Solenoid Valves. Poppet and Spool type solenoid actuated valves for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm) A-1.
Solenoid Valves Poppet and Spool type solenoid actuated valves for applications up to 5 bar (5 psi) and 7 L/min (6 USgpm) n Eaton Brand ETON Screw-In Cartridge Valves E-VLSC-MC-E November 9 -. Solenoid
VSD10M DIRECTIONAL CONTROL VALVES SOLENOID ACTUATED, PILOT OPERATED
NFPA SIZE D10 TYPICAL PERFORMANCE SPECIFICATIONS Performance is measured on a four-way circuit (full circuit). Performance may be reduced from that shown if a three-way circuit (half circuit) is used,
ANTI-SHOCK DIRECTIONAL CONTROL VALVES
ACTUATED, DIRECT OPERATED TYPICAL PERFORMANCE SPECIFICATIONS Performance is measured on a four-way circuit (full circuit). Performance may e reduced from that shown if a three-way circuit (half circuit)
FULL RANGE PRESSURE COMPENSATING VARIABLE FLOW CONTROL
B Certificate FULL RANGE PRESSURE COMPENSATING VARIABLE FLOW CONTROL FC1 FC ISO 91:2 WIT DESIGN #2.2.1 FC1-3/ INLET (IN) FC FCB1-3/ INLET (IN) FCR1-3/ FCR1 INLET (IN) FEATURES: DIAMOND ONED SPOOL BORE
EFC. Electronically Adjustable Proportional Pressure Compensated Flow Control
Engineering & Manufacturing Solutions Specifications: See flow chart for capacity. 3000 psi (207 bar) rating. Weighs 8-1/2 lbs. (3.9 kg). Standard Port size #12SAE (1-1/16 12). 10-Micron Filtration Recommended.
BW0511FP. ByWire Elements BW0511FP Flow Sharing Element Interface IBW0511
ywire Elements Flow Sharing Element Interface IW05 efore use, carefully read the GENERL INSTRUCTIONS FOR USE OF DIRECTIONL CONTROL VLVES Technical data Nominal flow Nominal pressure 35 l/min - P=8 bar
* Optional PRESSURE COMPENSATOR - FLANGED TYPE B A X 2.2. Typical application VR5P with flow control valve
* Veljan 3 ports pressure compensator Valve are designed for improved operation safety and reduced mountg cost. These valves are used to mata a constant pressure drop External PD, External PP Internal
Model (kg) CIT CRG-06 CIT : CIT CRG-10 CIT : CIT CIT
check valve OUT IN RG - 06-5 1 3 1 RG: Sub-plate mounting IT: Thread connection Valve size 03: 3/8" 04: 1/" 06: 3/4" 08: 1" 10: 1-1/4" 1: 1-1/" 16: " 3 racking pressure (bar) 5: 0.5 50: 5 Rated Flow Max.
PRODUCT INFORMATION FAQ s
PRODUCT INFORMATION FAQ s Directional Control Valves General....... Page 2 Directional Control Valves Electric....... Page 4 Directional Control Valves Options....... Page 6 Directional Control Valves
Catalog HY /US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI
Catalog HY15-351/US Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI PRESSURE RELIEVING AP1B2YP... 2G... Increase /Increase Current...5.3/1.4... 35/5... 7-8 AP2A2... C8-2... Increase
S.A. 193 Stefan Cel Mare str., 2400 Sibiu -Romania
S.A. H rd 193 Stefan Cel Mare str., 2400 Sibiu -Romania 1 240 l/min 315 bar Pressure control valves NG10,20,32 FC -9 GENERALITIES Pilot operated pressure control valves, available with/without by-pass
PACKED SPOOL 4-WAY DIRECTIONAL CONTROL VALVE.
PACKED SPOOL 4-WAY DIRECTIONAL CONTROL VALVE www.elwood.com 0 0 1 : 0 0 0 C E R T I F I E D C O M P A N Y 4-Way 3-Postion Valve 4-WAY, 3-POSITION DIRECTIONAL VALVE, AIR SOLENOID OPERATED SHOWN; DIRECT
Manapak Sandwich Valves. General Description
echnical Information Series RM General Description RM Series relief valves limit system pressure by opening to tank when system pressure reaches the valve setting. With D3 size, they can also be configured
Directional Seat Valve Series D4S (Denison)
Characteristics Seat valves series D4S are designed for directional control functions. A large variety of poppets, springs and covers - including shuttle valves, stroke limiters, solenoid valves (VV01)
Catalog HY /US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI
Catalog HY15-352/US Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI PRESSURE RELIEVING AP1B2YP... 2G... Increase /Increase Current...5.3/1.4... 35/5... 7-8 AP2B2YP... C8-2...
J Series Filters HIGH PRESSURE FILTERS. J88 Mini In-Line (Replaceable Filter) J85 Tee-Type. J82 Mini In-Line. J83 In-Line
J Series Filters HIGH PRESSURE FILTERS J Series Filters provide filtration of particulates in gas and liquid systems prior to pressure or flow control components. J Series Filters utilize a pleated, 0
VINCKE INDUSTRIAL HYDRAULIC VALVES MODULAR VALVES SERIES
MODULAR VALVES SERIES 20 KRV RELIEF VALVES KRV series modular relief valves can control flow for positive direction pass oil port. Flow can be adjusted by handle. It passes to check valve for reverse flow.
Solenoid valves. Poppet and Spool type solenoid actuated valves for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm)
Hydraulic Screw-in Cartridge Valves (SiCV) Solenoid valves Poppet and Spool type solenoid actuated valves for applications up to 5 bar (5 psi) and 7 L/min (6 USgpm) Solenoid valves SOLENOID VLVES...- SV5-8-C/CM
MPD Series Medium Pressure Filters
Medium Pressure Filters 113 Applications - Circulating Lube Oil Systems - Power Generation Control Systems - Steel Mill Control Systems - Pulp & Paper Control Systems - Test Stands - Automotive Stamping
VED*M PROPORTIONAL PILOT OPERATED DIRECTIONAL CONTROL VALVES
CONTINENTAL HYDRAULICS VED*M PROPORTIONAL PILOT OPERATED DIRECTIONAL CONTROL VALVES 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM TOUGH VED*M PROPORTIONAL
VS6M - SOLENOID OPERATED DIRECTIONAL VALVES
CONTINENTAL HYDRAULICS VS6M SOLENOID OPERATED DIRECTIONAL VALVES 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM VS6M SOLENOID OPERATED DIRECTIONAL VALVES
MPD Series. Medium Pressure Duplex
Medium Pressure Duplex 81 Applications of MPD Circulating Lube Oil Systems Power Generation Control Systems Steel Mill Control Systems Pulp & Paper Control Systems Test Stands Automotive Stamping Presses
Chapter 6: Check Valves
Contents Chapter : Check Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 0 10 1 25 32 Subplate Screw-in Slip-in Shuttle valves SSR -2 Check valves, direct operated
Industrial Hydraulic Valves. Directional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories. Catalog HY /US
Industrial Hydraulic Valves irectional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories Catalog HY14-25/US Industrial Hydraulic Valves WARNING USER RESPONSIBILITY FAILURE OR IMPROPER
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)
Features MF Filters are manufactured with an aluminum head. MF, MFD, MFDS Series Spin-On Filters Choice of NPT, SAE straight thread O-ring boss, BSPP, and SAE 4-bolt flange porting to allow easy installation
Hydraulic Fluids. Note: For use with hydraulic fluids other than those listed above, please consult your Yuken representatives in advance.
Hydraulic Fluids Fluid Types Any type of hydraulic fluids listed in the table below can be used. Petroleum base oils Use fluids equivalent to ISO VG 32 or VG 46. Use phosphate ester or polyol ester fluid.
MONOBLOCK DIRECTIONAL CONTROL VALVES
MONOBLOCK DIRECTIONAL CONTROL VALVES CONTENTS: RM0...... RM5...... RM40P...... RM80...... RMD90...... MRP70... Page 1/19&/19 /19...5/19 6/19...10/19 11/19...15/19 16/19&17/19 18/19&19/19 MONOBLOCK DIRECTIONAL
Logic elements. Differential pressure sensing elements for applications up to 350 bar (5000 psi) and 400 L/min (100 USgpm)
Hydraulic Screw-in Cartridge Valves (SiCV) Logic elements Differential pressure sensing elements for applications up to 50 bar (5000 psi) and 400 L/min (00 USgpm) Logic elements LOGC ELEMENTS... -4 APPLCATON
Chapter 6: Check Valves
Contents Chapter : Check Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 0 10 1 25 32 Subplate Screw-in Slip-in SSR RK / RB CS SPZBE SPV / SPZ C4V CPS C4V D4S
VER03MP CONTINENTAL HYDRAULICS PROPORTIONAL PRESSURE RELIEF VALVES PILOT OPERATED VER03MP - PROPORTIONAL PRESSURE RELIEF VAVLES PILOT OPERATED
CONTINENTAL HYDRAULICS VER03MP PROPORTIONAL PRESSURE RELIEF VALVES PILOT OPERATED VER03MP - PROPORTIONAL PRESSURE RELIEF VAVLES PILOT OPERATED 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400
Pressure Control Valves
Catalog HY15-351/US Contents RELIEF VALVES SEQUEN VALVES Control SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. /GPM BAR/ DIRECT ACTING RDH42... C4-2... Direct Acting Relief, Poppet Type... 3.8/1...
Low Pressure Filters
MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM Hydraulic Symbol /80/85/160/180 MF 90/95/190/195 A A B B Features MF Filters are manufactured with an aluminum head. Choice of NPT, SAE straight
Coolers. OK Series. Air Cooled Oil Coolers Hydraulic Symbol OK 1-11 OKF Cooling Systems Catalog. Applications
OK Series Air Cooled Oil Coolers Hydraulic Symbol OK 1-11 OKF 3-11 OKA 4-6 OKAF 4-6 OKA 8-11 OKAF 8-11 Description The OK Series cooler design uses a axial fan assembly which draws air through the cooler.
Sandwich Valves Series CP
Technical Information General Description. pilot operated check valves are designed for maximum flow rates. The valves are typically used in combination with spool type directional control valves to ensure
Ordering details MRV 02 P K Nominal size. 02:NG6 Cetop3 03:NG10 Cetop5 04:NG16 Cetop7 06:NG22 Cetop8. Modular relief valve MRV-B MRV-02C.
MRV series modular relief valves echnical specification Model Max.flow rate (l/min) Working pressure (Ma) Weight(kgs) Symbol list MRV- MRV-02 MRV series modular relief valves can control flow for positive
Proportional Valves. Proportional solenoid valves for pressure and flow control B-1.A. An Eaton Brand
Proportional Valves Proportional solenoid valves for pressure and flow control An Eaton rand -.A Proportional Valves Valve Locator/Section Contents Note: Proportional valve solenoid coils and electronic
LOAD SENSE SECTIONS. Series 20. Directional Control Valves NEED NEW PIC VALVES STANDARD FEATURES SPECIFICATIONS
Directional Control Valves LOAD SENSE SECTIONS NEED NEW PIC Series 20 STANDARD FEATURES Control and reduced Dead Band (20I) and Tie Rod Kits SPECIFICATIONS Pressure Rating Foot Mounting Maximum Operating
SV SOLENOID OPERATED
Directional Control Valves SV Work Sections Type -T Solenoid Operated Type -S Solenoid and Manual Operation STANDARD FEATURES Open center or closed center applications Port relief options available Internal
Differential Proportional Flow Control Valve DPCMEE 16 & 20
Differential Proportional Flow Control Valve DPCMEE 6 & 2 Table of Contents Designation Symbol Page General Description and Operating Principle 4 Specifications 5 Performance Data DPCMEE6 - CK; EK and
PROPORTIONAL DIRECTIONAL CONTROL VALVES PILOT OPERATED WITHOUT LVDT TYPICAL PERFORMANCE SPECIFICATIONS W/O LVDT, OPEN INNER LOOP MOUNTING SURFACE
ED8M PILOT OPERTED WITHOUT TYPICL PERFORMNCE SPECIFICTIONS W/O, OPEN INNER LOOP MOUNTING SURFCE NFP/T3.5.1M R1-1984 D8 (Formely D6) NSI/B93.7M-1986 ISO SIZE 8 These proportional directional control valves
MPD Series. Medium Pressure Duplex
Medium Pressure Duplex 89 Applications of MPD Circulating Lube Oil Systems Power Generation Control Systems Steel Mill Control Systems Pulp & Paper Control Systems Test Stands Automotive Stamping Presses
High Pressure, High Flow Rate Modular Valves
High Pressure, High Modular Valves EIC-F-14- MODULR VLVES The modular valves are functional elements with which a hydraulic system can be composed and built easily by stacking them with the mounting bolts.
4-Way Directional Control Valve With Hydraulic Kick Out
Engineering & Manufacturing Solutions 4-Way Directional Control Valve With Hydraulic Kick Out Specifications: Rated for 0-18 gpm (0-68.1 lpm) Rated for 3000 psi (207 bar) Weighs 5-1/2 lbs. (2.5 kg) 30
3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow
3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow A-VRFC3C-VEI-VS 0M.43.20.80 - Y - Z RE 18309-3 Edition: 03.2016 Replaces: 06.2010 Technical data Description
VER03M CONTINENTAL HYDRAULICS PROPORTIONAL PRESSURE RELIEF VALVES VER03M - PROPORTIONAL PRESSURE RELIEF VALVES
CONTINENTAL HYDRAULICS VER03M PROPORTIONAL PRESSURE RELIEF VALVES 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM ACCURATE VER03M PROPORTIONAL PRESSURE RELIEF
VEP03MSV-PDRP CONTINENTAL HYDRAULICS 3-WAY PROPORTIONAL PRESSURE REDUCING/RELIEVING VALVES
CONTINENTAL HYDRAULICS VEP03MSV-PDRP 3-WAY PROPORTIONAL PRESSURE REDUCING/RELIEVING VALVES VEP03MSV-PDRP - 3-WAY PROPORTIONAL PRESSURE REDUCING/RELIEVING VALVES 5505 WEST 123RD STREET SAVAGE, MN 55378-1299
HY-SPEC CATALOGUE - HYDRAULIC VALVES. Hydraulic Valves. Visit our website Catalogue
HY-SPEC CATALOGUE - HYDRAULIC VALVES Hydraulic Valves Catalogue Visit our website HY-SPEC PRODUCT FAMILY HY-SPEC CATALOGUE - AC/DC POWER PACKS HY-SPEC CATALOGUE - GAS ENGINE PRODUCTS Accessories AC/DC
10 SERIES MODULAR VALVES
General Information Mounting Surface : ISO 441-A-1-4-A, CETOP-1, NPA-D1 Up to 5 MPa (363 PSI), 8 L /min (11 U.S.GPM) Pub. EC-145 The modular valves are functional elements with which a hydraulic system
High Pressure, High Flow Rate Modular Valves
eatures Installation and mounting space can be minimized. No special skill is required for assembly and any addition or alternation of the hydraulic circuit can be made quickly and easily. roblems such
NV452 Monoblock directional control valve
NV452 Monoblock directional control valve Product Features General Specifications Order Coding Open Center Load Sense Performance Data Inlet Options Spool Positioners Spool Options Auxilary Valves Lever
V250 SERIES DIRECTIONAL CONTROL VALVES
V SERIES DIRECTIONAL CONTROL VALVES TAKE CONTROL OF YOUR HYDRAULICS Take control with Muncie Power Products V directional control valve. The V is constructed with high-grade iron castings and nickel-plated
06 SERIES MODULAR VALVES. Pub. EC-1404
6 SERIES General Information Mounting Surface : ISO -AE-8--A, CETOP-8, NPA-D6 Up to 5 MPa (363 PSI), 5 L /m in (3 U.S.GPM) Pub. EC- The modular valves are functional elements with which a hydraulic system
Solenoid Pilot Operated Directional Control Valve
Solenoid Pilot Operated Directional Control Valve Features The highly reliale KSO-2 adopted as the pilot valve ensures long service life and stale operation. 1 Nomenclature - JS - - - - 1 2 3 4 5 7 8 9
Contents. Directional Control Valve 2 Series CV Unibody. Page 3-4. General Information. Page 5. Technical data. Page 6. Performance Curves
Contents Page 3-4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11-12 Page 13 Page 14 Page 15 General Information Technical data Performance Curves Dimensions - Basic Valve Dimensions - Unibody Secondary
Mobile Directional Valve. Product Catalog MDG for Mobile Equipment Flows to 60 I/min (15.8 USgpm)
Mobile Directional Valve Product Catalog MDG for Mobile Equipment Flows to 60 I/min (15.8 USgpm) Table of Contents General Information...3 Model code Valve Section...4 Valve Assembly...5 Spool Data...6
Publ. 3-EN 2950-A. DENISON HYDRAULICS Pressure Relief Valve R6V
Publ. 3-EN 2950-A DENISON HYDRAULICS Pressure Relief Valve R6V FEATURES, SYMBOL FEATURES High Performance: R6V valves are designed for a maximum pressure of 350 bar and a flow capacity up to 650 l/min.
Proportional Valves. Proportional solenoid valves for pressure and flow control
Proportional Valves Proportional solenoid valves for pressure and flow control EATON Vickers Screw-In Cartridge Valves V-VLOV-MC-E4 September, 7 - Electro- Proportional Valves Section Contents Typical
SV9A-10-E - Solenoid Valve 4-way, 3-position spool type solenoid valve Up to 36 L/min (9.5 USgpm) 210 bar (3000 psi)
SV9--E - Solenoid Valve -way, -position spool type solenoid valve Up to 6 L/min (9.5 USgpm) bar ( psi) () () (P) (T) In the de-energized position all ports are closed. When solenoid '' is energized flow
FLOW CONTROLS. Maximum Flow U.S.GPM Maximum Operating Pressure MPa (PSI) Graphic Symbols. Page. Valve Type.
FLOW CONTROLS Valve Type Graphic Symbols Maximum Operating Pressure MPa (PSI) Maximum Flow U.S.GPM 5 5 5 5 5 5 5 Page Flow Control Valves (5) 77 Flow Control and Check Valves (5) 77 Pilot Operated Flow
Remote Process Actuation Control System AirLINE - Rockwell 1734 Point I/O System
Remote Process Actuation Control System AirLINE - Rockwell 1734 Type 8644 can be combined with... Fully compatible with Rockwell 1734 Point I/O System Combination of Fieldbus, pilot valves and I/O modules
PILOT OPERATED UNLOADING VALVE - Series VR4U
PILOT OPERTED UNLODING VLVE - Series VR4U Veljan Unloadg Valves series VR4U are pilot operated controls and used to Internal Dra unload a circuit at low pressure when pilot pressure at pt is mataed higher
FCL Filter Cart Flow rate up to 22 gpm (82 lpm)
click here to return to website FCL Filter Cart Flow rate up to 22 gpm (82 lpm) Ideal for high viscosity Lubrication and hydraulic oils (ISOVG22 ~ ISOVG320) Filter new fluids during transfer and replenishment
unrestricted; preferably with coil at bottom (auto. air bleed) 12 or 24 Volt DC from an electronic controller Deutsch plug - IP67
3 Technical data General characteristics Design Flow direction Seals De-energized position Mounting attitude Description, value, unit line mounting P A controlled P R surplus flow discharge (models shown
VEP03MSV-PDRP -3-WAY PROPORTIONAL PRESSURE REDUCING/RELIEVING VALVES
CONTINENTAL HYDRAULICS VEP03MSV-PDRP 3-WAY PROPORTIONAL PRESSURE REDUCING/RELIEVING VALVES VEP03MSV-PDRP -3-WAY PROPORTIONAL PRESSURE REDUCING/RELIEVING VALVES 5505 WEST 123RD STREET SAVAGE, MN 55378-1299
DRV2-080 Adjustable, Direct-Acting Relief Valve
SOLENOID DRV2-080 Adjustable, Direct-Acting Relief Valve SERIES 8 CHECK MOTION FLOW USASI / ISO ➁ ➀ DESCRIPTION An adjustable, direct-acting poppet cartridge valve designed to limit pressure in hydraulic
VSNG10 - SOLENOID OPERATED DIRECTIONAL VALVES
CONTINENTAL HYDRAULICS VSNG10 SOLENOID OPERATED DIRECTIONAL VALVES 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM VSNG10 SOLENOID OPERATED DIRECTIONAL VALVES
PILOT OPERATED PRESSURE RELIEF VALVE - Series VR4V
PILOT OPERTED PRESSURE RELIEF VLVE - Series VR4V The Veljan Pressure Relief Valve series VR4V are pilot operated and work Internal Dra on the prciple of hydraulic balancg. These valves are used to limit
Throttle Modules / Throttle and Check Modules
FLOW CONTROLS Used as pilot choke valves for solenoid controlled pilot operated directional valves and pilot operated directional valves. Graphic Symbols Valve Size 3 Standard Type P AB T TCG- P A B T