Model (kg) CIT CRG-06 CIT : CIT CRG-10 CIT : CIT CIT

Transcription

1 check valve OUT IN RG RG: Sub-plate mounting IT: Thread connection Valve size 03: 3/8" 04: 1/" 06: 3/4" 08: 1" 10: 1-1/4" 1: 1-1/" 16: " 3 racking pressure (bar) 5: : 5 Rated Flow Max. Operating racking Pressure Weight Sub-Plate Mounting Thread onnection (lpm) Pressure(bar) (bar) (kg) RG-03 IT IT RG-06 IT : IT RG-10 IT : IT IT IT-03,04,06,08,10,1,16 RG-03,04,06 A B IT /8 IT / IT /4 IT IT /4 IT / IT A B D E F G H J K L N P Q Bolt size RG M10 x 60L x 4pcs RG M16 x 60L x 4pcs RG M0 x 75L x 4pcs RGM-03 RGM-06 RGM-10 P40

2 check valve OUT IN RG Sub-plate mounting Valve size 03: 3/8" (ISO 5781-AG-06--A) 06: 3/4" (ISO 5781-AH-08--A) 10: 1-1/4" (ISO 5781-AJ-10--A) 3 racking pressure (bar) 5: : 5 4 ISO standard Rated Flow (lpm) Max. Operating Pressure (bar) racking Pressure (bar) Weight (kg) RG : 0.5 RG : 5 RG RG , RG RG A B D E F RG RG G H I J K L RG RG P41

3 pilot operated check valve OUT IN PLT PD - T E Mounting type G: Sub-plate mounting T: Thread connection F: Flange connection Valve size 03: 3/8" 06: 3/4" 10: 1-1/4" 16: " E: External drain Omit: Internal drain racking pressure Max. Operating racking Rated Flow Weight(kg) Sub-Plate Thread Flange Mounting onnection onnection Pressure (bar) Pressure (bar) (lpm) G type T type F type PDG-03 PDT-03 - PDG-06 PDT-06 - PDG-10 PDT-10 PDF PDF-16 5: : : PDG-03, PDG-06 PDG-10 A B D E F G H PDG PDG PDF-16 PDT-03,06,10 A B D E F G H PDT PDT PDT P4

4 In-line pilot operated check valve PVI T Valve size 03: 3/8" 04: 1/" 3 Mounting type T: Thread connection Max. Operating racking Max. Flow Weight Pressure (bar) Pressure(bar) (lpm) (kg) PVI-03T PVI-04T PVI-03,04T (inch) Remark: The size in [ ] is for 04T Performance curves PDG-03, PDT-03 PDG-06, PDT-06 PDG-10, PDT-10 P43

5 prefill valve FEATURES: Material is F30, Max. working pressure 3400psi. Both 180 and 90 degrees connection available. Min. pilot pressure required is 1/3 working pressure. heck operated in two stages to preclude shock. T YL PL SG Valve size 16: " 4: 3" 3: 4" 48: 6" 3 None: 180 L: 90 Maximum Max. Flow(lpm) Operating Flow(lpm) racking Weight Pressure (bar) No Pilot Pilot No Pilot Pilot Pressure (bar) (kg) SG ±70M 450±70M SG ±150M 900±150M SG ±300M 1600±300M SG ±600M 300±600M SG-16, 4, 3, 48 A B D E F G H I J K L M d1 d d3 SG PT 3/8 SG PT 3/8 SG SG P44

6 flange-clamped type prefill valve Low-pres. side Pilot port High-pres. side SVF SVF: Steel body SM4 (Max. 400 bar) SF: Ductile iron body FD50 (Max. 50 bar) Valve size Port size Max. Flow Max. Operating Pilot Flange Bolts Pipe size Weight Inch (lpm) Pressure (bar) Ratio Number Nor. Diamater (kg) SVF M16 B 1.3 SVF-40-1/ M0.5B. SVF M16 3B.9 SVF / M16 3.5B 4.5 SVF M0 4B 6. SVF M5 5B 1.3 SVF M5 8B 3 SVF M30 10B 50 SVF M30 1B 85 SVF M30 16B 156 SF M16 B 1.3 SF M16 3B.9 SF / M16 3.5B 4.5 SF M0 4B 6. SF M5 5B 1.3 SF M5 8B 3 / Performance curves Pilot port adaptor Orifice Plug SVF (SF)-3, 40, mm SVF (SF) mm SVF (SF) mm PT1/8" SVF (SF) mm SVF (SF)-15, mm SVF mm PT1/4" SVF(SF)3-00 øa øb ø ød øe F G L PX Fixed bolt O-ring SVF-3, SF SVF M4 x SVF-50, SF M4 x SVF-63, SF PT 1/4" M5 x 35 P95 SVF-80, SF M5 x 40 P10 SVF-100, SF M6 x 45 P145 SVF-15, SF M6 x 60 P185 SVF PT 3/8" M8 x 70 P35 SVF PT 1/" M10 x 95 P95 SVF PT 1/" M1 x 115 P375 P45

7 flange-clamped type prefill valve FGP M5-5B FGP: High-pres. Side flange FGT: Low-pres. Side flange 3 Valve size Pressure range : 50 bar 4: 400 bar 4 Normal bolt size 5 Normal pipe diameter FGT FGP FGT FGP ød øf øb øa øe ø H G K M FGP-3-M16/B FGT-3-M16/B ø18 FGP-40-M0/.5B FGT-40-M0/.5B M4 4-ø FGP-50-M16/3B FGT-50-M16/3B M4 6-ø18 FGP-63-M16/3.5B FGT-63-M16/3.5B / M5 8-ø18 FGP-80-M0/4B FGT-80-M0/4B / M5 8-ø FGP-100-M5/5B FGT-100-M5/5B /6 5 -M6 10-ø7 ød øf øb øa øe ø H G K M FGP-15-M5/8B FGT-15-M5/8B /67 5 -M6 16-ø7 FGP-160-M30/10B FGT-160-M30/10B / M6 16-ø33 FGP-00-M30/1B FGT-00-M30/1B / M10 0-ø33 FGP-50-M30/16B FGT-50-M30/16B / M1 4-ø33 P46

8 flange-clamped type prefill valve Low-pres. side Pilot port High-pres. side PF-80 PF-80F PF F - W Valve size Mounting type F: Flange None: Standard 4 Flange type None: No flange P: P port flange T: T port flange W: P&T port flange Port Size (Inch) Max. Operating Pressure (bar) Max. Flow (lpm) racking Pressure (bar) Weight (kg) PF-80 / PF-80F / 8 PF-90 / PF-90F 3-1/ / 11.3 PF-100 / PF-100F / 14.5 PF-15 / PF-15F / 3.8 PF-150 / PF-150F / 37 PF PF-80,90,100F PF-15F PF-150F A B D E F G H PF PT1/ G80 6 PF PT1/ G100 6 PF PT1/ G115 6 PF PT1/ G140 6 PF PT3/ G PF PT1/ P35 10 A B D E F G H I J PF-80F PT1/ G PF-90F PT1/ G PF-100F PT1/ G PF-15F PT1/ G PF-150F PT3/ G P47

9 MANUALLY OPERATED DIRETIONAL VALVE BALL LOKING SPRING ENTERING DM G W Mounting type G: Sub-plate mounting T: Thread connection 3 Valve size 4 Valve function Same as solenoidvalve DSG series 5 entered locking W: Spring centering O: Ball locking Max. Operating Max. Back Max. Flow Weight (kg) Sub-Plate Mounting Thread onnection Pressure(bar) Pressure (bar) (lpm) DMG DMT Bolt size DMG DMG M5 x 45L DMG-03 DMT M6 x 35L - DMT DMG-06 DMT M1 x 55L - DMT DMT-03,04,06,10 D E F G H J K L N Q S U V X Y Z a b d e f g(pt) DMT M - 3/8 DMT / DMT /4 DMT /4 P48

10 MANUALLY OPERATED DIRETIONAL VALVE DMG-0 (ISO ETOP 3, NFPA D03, DIN NG 6) (inch) DMG-03G (ISO ETOP 5, NFPA D05, DIN NG 10) DMG-06 (ISO ETOP 8, NFPA D08, DIN NG 5) P49

11 MANUALLY OPERATED DIRETIONAL VALVE HV-03T HV-03QT DGH-T03 A Port size (PT) Max. Pressure (bar) Flow rated (lpm) Weight (kg) HV-03T 3/8" HV-03QT 3/8" DGH-T03 1/4" HV-03T HV-03QT DGH-T # P A B T 35 4-ø5.5 ø8 DEPTH # 4-PT1/4 P50

12 MANUALLY OPERATED DIRETIONAL VALVE HV- HVW- HV HVW HV single lever HVW double lever Valve size 380: G3/8" 10: G1/" 340: G3/4" 100: G1" Max. Pressure Max. Flow Weight (kg) (bar) (lpm) HV HVW HV HVW HV HVW HV HVW HV HVW (inch) Size HV-380 HV-10 HV-340 HV-100 A 4 (0.95") 6.5 (1.04") B 64.5 (.54") 68.1 (.68") (6.83") (7.11") D 85 (3.35") 99.4 (3.91") E 36 (1.4") 4 (1.65") F 37.5 (1.47") 44.6 (1.77") G 75 (.95") 90 (3.54") H G3/8 G1/ G3/4 G1 Size HVW-380 HVW-10 HVW-340 HVW-100 A 4 (0.95") 6.5 (1.04") B 18.9 (5.08") (5.37") (6.83") (7.11") D 85 (3.35") 99.4 (3.91") E 36 (1.4") 4 (1.65") F 37.5 (1.47") 44.6 (1.76") G 75 (.95") 90 (3.54") H M8 M10 I G3/8 G1/ G3/4 G1 P51

13 servo control valve FEATURES: Servo control accuracy up to ±0.005mm. Actuated by hydraulic system. The unit is applicable for plano-miller, milling machine, etc. Precision structure. Long service life. Various models for choice. SA - G SA: With cover and long shaft SB: Without cover and short shaft Mounting type G: Sub-plate mounting 3 Valve size SA, SB-G0 Max. Pressure (bar) Oper. Pressure (bar) Examples of copy machining Max. Back Pressure (bar) Spool Shift mm Max. Flow (lpm) SA, SB-G ~15 0 ± Weight (kg) 70.5 SA, SB-G Basic hydraulic circuit P5

14 servo control valve SA-0 SA-03 SA-04 P53

15 AM OPERATED DIRETIONAL VALVE D G B Mounting type G: Sub-plate mounting T: Thread connection 3 Valve size DG-01: 1/8" (ISO ETOP 3, NFPA D03, DIN NG 6) DT-01: PT 1/8" 4 Spool type B B3 B8 Sub-Plate Mounting Thread onnection Max. Operating Pressure(bar) Rated Flow (lpm) Weight (kg) Bolt Size DG-01 DT M5 x 50L P54

16 SOLENOID OPERATED DIRETIONAL VALVE DSG A - N Nominal valve size 1/4" (ISO ETOP 3, NFPA D03, DIN NG 6) 3 Spool type 4 5 oil voltage No symbol: Joint box type A11: A110V (50/60HZ) A: A0V (50/60HZ) A4: A40V (50HZ) A38: A380V (50HZ) D1: D1V D: D4V R1: R110V (50/60HZ) R: R0V (50/60HZ) N: Din connector type ITEM Numbers Spool Type Rated Flow lpm (gpm) Max. Flow lpm (gpm) A / D / R 1 DSG-3 50 (13.) 70 (18.5) DSG-34 3 DSG (7.9) 70 (18.5) 4 DSG DSG (7.9) 50 (13.) 6 DSG-33 7 DSG-D 8 DSG-D3 40 (10.6) 50 (13.) 9 DSG-B3 10 DSG-B 40 (10.6) 70 (18.5) 11 DSG-B8 P55

17 SOLENOID OPERATED DIRETIONAL VALVE DSG-0-A (inch) Parts name Description Tightening torque Attachment SO. HD. cap screw M5 x 45Lg x 4pcs 5~7Nm Attachment SO. HD. cap screw 10-4UN x 1-3/4"Lg x 4pcs 43~60in. lbs DSG-0-D/RA Parts name Description Tightening torque Attachment SO. HD. cap screw M5 x 45Lg x 4pcs 5~7Nm Attachment SO. HD. cap screw 10-4UN x 1-3/4"Lg x 4pcs 43~60in. lbs P56

18 SOLENOID OPERATED DIRETIONAL VALVE DSG-0-A-N (inch) Parts name Description Tightening torque Attachment SO. HD. cap screw M5 x 45Lg x 4pcs 5~7Nm Attachment SO. HD. cap screw 10-4UN x 1-3/4"Lg x 4pcs 43~60in. lbs DSG-0-D/RA-N Parts name Description Tightening torque Attachment SO. HD. cap screw M5 x 45Lg x 4pcs 5~7Nm Attachment SO. HD. cap screw 10-4UN x 1-3/4"Lg x 4pcs 43~60in. lbs P57

19 SOLENOID OPERATED DIRETIONAL VALVE FEATURES: Plug-in solenoids for easier to change to coils. Easier maintenance with all spools and bodies are interchangeable by keeping the same limitation of internal leakage. Low noise level while all the movable parts are submerged in the working oil cushion impact reduces the operation noise. High voltage test up to 1500 v/min. Insulation resistance exceeds 100MΩ. Momnentary signal for shifting action at approx. 0.1 second. Longer service life for durability to 30,000,000 spool shifts. High class insulation coil for high temperature resistance up to 180. Max. pressure P.A.B. 315 bar (4600psi) Max. back pressure T 70~160 bar (1400~300psi) Weight kg (lb) Single solenoid A 1.5 (3.3) D(R) 1.6 (3.5) Double solenoid A 1.85 (4) D(R) (4.4) Maximum frequency of operation (cycle/min) 150 Ambient temperature range recommended 5~60 (67~166 F) Using oil (cst) 0~300 Filtration (micron) 5 Performance curves Performance chart Test fluid viscosity: 35 cst Test temperature: 50 (1 F) (0) 5 P A P B A T B T P T D 5 5 D B 5 5 B Pressure drop P Flow (lpm) P58

20 SOLENOID OPERATED DIRETIONAL VALVE DSG A - N Nominal valve size 3/8" (ISO ETOP 5, NFPA D05, DIN NG 10) 3 Spool type 4 5 oil voltage No symbol: joint box type A11: A110V (50/60HZ) A: A0V (50/60HZ) A4: A40V (50HZ) A38: A380V (50HZ) D1: D1V D: D4V R1: R110V (50/60HZ) R: R0V (50/60HZ) N: Din connector type ITEM Numbers Spool Type Rated Flow lpm (gpm) Max. Flow lpm (gpm) A / D / R 1 DSG-3 DSG (18.5) 10 (31.7) 3 DSG-35 4 DSG DSG DSG-33 7 DSG-D 50 (13.) 80 (1.1) 8 DSG-D3 9 DSG-B3 10 DSG-B 70 (18.5) 10 (31.7) 11 DSG-B8 P59

21 SOLENOID OPERATED DIRETIONAL VALVE DSG-03-A (inch) Parts name Description Tightening torque Attachment SO. HD. cap screw M6 x 35Lg x 4pcs 1~15Nm Attachment SO. HD. cap screw 1/4-0UN x 1-1/"Lg x 4pcs 105~130in. lbs DSG-03-D/RA Parts name Description Tightening torque Attachment SO. HD. cap screw M6 x 35Lg x 4pcs 1~15Nm Attachment SO. HD. cap screw 1/4-0UN x 1-1/"Lg x 4pcs 105~130in. lbs P60

22 SOLENOID OPERATED DIRETIONAL VALVE DSG-03-A-N (inch) Parts name Description Tightening torque Attachment SO. HD. cap screw M6 x 35Lg x 4pcs 1~15Nm Attachment SO. HD. cap screw 1/4-0UN x 1-1/"Lg x 4pcs 105~130in. lbs DSG-03-D/RA-N Parts name Description Tightening torque Attachment SO. HD. cap screw M6 x 35Lg x 4pcs 1~15Nm Attachment SO. HD. cap screw 1/4-0UN x 1-1/"Lg x 4pcs 105~130in. lbs P61

23 SOLENOID OPERATED DIRETIONAL VALVE Max. pressure P.A.B. 315 bar (4600psi) Max. back pressure T 70~160 bar (1400~300psi) Weight kg (lb) Single solenoid A 3.3 (7.3) D (R) 3.7 (8.) Double solenoid A 4 (8.8) D (R) 4.8 (10.6) Maximum frequency of operation (cycle/min) 150 Ambient temperature range recommended 5~60 (67~166 F) Using oil (cst) 0~300 Filtration (micron) 5 Performance curves Performance chart P A P B A T B T P T D 5 5 D B 5 5 B Pressure drop P (bar) Test fluid viscosity: 35 cst Test temperature: 50 (1 F) (03) Flow (lpm) Electrical wirings 3 Technical data urrent A/D A D Frequency (Hz) Rating voltage (V) (01) In-rush current /4 Holding current (03) In-rush current /8" Holding current DSG In-rush current R Holding current DSG In-rush current R Holding current Permissible voltage (V) Rating voltage +10% or -15% Insulation resistance (MΩ) More than 100MΩ (D 500V insulation tester) P6

24 Pilot operated directional valve AB Type DSHG AB - E - T - A Nominal valve size 03: 3/8" (ISO ETOP 5, NFPA D05, DIN NG 10) 04: 1/"( ISO ETOP 7, NFPA D07, DIN NG 16) 06: 3/4" (ISO ETOP 8, NFPA D08, DIN NG 5) 10: 1-1/4" (ISO ETOP 10, NFPA D10, DIN NG 3) 3 Spool type 4 AB: With stroke adjusting both ends A: With stroke adjusting port A B: With stroke adjusting port B 5 E: External pilot Omit: Internal pilot 6 T: Internal drain Omit: External drain 7 Voltage A11: A110V (50/60HZ) A: A0V (50/60HZ) A4: A40V (50HZ) A38: A380V (50HZ) D1: D1V D: D4V R1: R110V (50/60HZ) R: R0V (50/60HZ) DSHG-03 DSHG-04, 06, 10 A B D E F G H K L N O P Q R S T U V DSHG ø3 DSHG ø6 DSHG ø6 X P63

25 PILOT OPERATED DIRETIONAL VALVE Numbers DSHG-03 DSHG-04 DSHG-06 DSHG-10 Rated Flow Max. Flow Rated Flow Max. Flow Rated Flow Max. Flow Rated Flow Max. Flow ITEM Numbers Spool Type (lpm) (lpm) (lpm) (lpm) (lpm) (lpm) (lpm) (lpm) 1 DSHG DSHG DSHG DSHG DSHG DSHG DSHG-D DSHG-D DSHG-B DSHG-B DSHG Max. pressure P.A.B. 315 bar (4600 psi) Max. back pressure T 70~160 bar (1400~300 psi) Weight kg (lb) Single solenoid 6.4 (14.08) 7.6 (16.7) 13.3 (9.6) 51.6 (113.5) Double solenoid 6.9 (15.18) 8 (17.6) 13.7 (30.14) 5 (114.40) Maximum frequency of operation (cycle/min) 10 Ambient temperature range recommended 5~60 (67~166 F) Using oil (cst) 0~300 Filtration (micron) 5 P64

26 SPOOL FUNTION TABLE Three Position Spring enter Standard Type Two Position No Spring Standard Type Two Position No Spring Standard Type 3 D DA 33 D3 D3A 34 D7 D4A 340 D8 D40A 35 Standard Type D5A 360 Spring Offset D7A 37 D9A 38 B D10A 39 B3 D11A 310 B8 D1A Two Position Spring Offset Standard Type Opposite Type Two Position Spring Offset Standard Type Opposite Type BA BB B3A B3B B4A B4B B40A B40B B5A B5B B60A B60B B7A B7B B8A B8B B9A B9B B10A B10B B11A B11B B1A B1B P65

27 SOLENOID OPERATED STAK VALVE (SETIONAL) DMW T Spool type 3 Norminal valve size 1/4" 4 Mounting type T: Thread connection 5 Voltage A1: A110V (60HZ) A115: A115V (50HZ) A30: A30V (50HZ) A: A0V (60HZ) D1: D1V D: D4V 6 Wiring type None: Din type X: Double lead 7 Number of valve block 1N~7N: 1~7 blocks 8 Release valve (selected mating) for inlet section S1: D1V S: D4V S3: RA110V S4: RA0V N: Normal closed NO: Normal open Max. Pressure (bar) Max. Flow (lpm) DMW- -0T Weight (kg) P66

28 SOLENOID OPERATED STAK VALVE (SETIONAL) (inch) Available Threads Ports P A-B T Size G3/8" G3/8" G3/8" P67

29 SOLENOID MANUAL OPERATED DIRETIONAL VALVE WED G Spool type (refer to page 66) 3 Norminal valve size 1/4" (ISO ETOP 3, NFPA D03, DIN NG 6) 4 Mounting type G: Sub-plate mounting 5 Voltage A1: A110V (60HZ) A115: A115V (50HZ) A30: A30V (50HZ) A: A0V (60HZ) D1: D1V D: D4V R1: RF110V (50/60HZ) R: RF0V (50/60HZ) 6 Wiring type 30: Din type 40: Amp type Max. Pressure (bar) Max. Flow (lpm) / Performance curve Weight (kg) A D (RF) Single Sol. Double Sol. Single Sol. Double Sol. WED- -0G (inch) P68

30 SOLENOID OPERATED HEK VALVE LVS - 0 G - A Norminal valve size 0: 1/4" (ISO ETOP 3, NFPA D03, DIN NG 6) 03: 3/8" (ISO ETOP 5, NFPA D05, DIN NG 10) 3 ontrol type 4 Voltage A1: A115V (50HZ) A: A30V (50HZ) D1: D1V D: D4V Max. Operating Pressure (bar) Max. Flow (lpm) Weight (kg) LVS-0G LVS-03G LVS-0G LVS-03G (inch) P69

31 LIFT VALVE Normal closed LVS - 03 T - N - A LVS: Ductile iron body Valve size 03: 3/8" 3 Mounting type T: Thread connection 4 N: Normal closed NO: Normal open 5 Voltage A11: A110V (50/60HZ) A: A0V (50/60HZ) D1: D1V D: D4V Max. Operating Max. Flow Max. Frequency Weight Pressure (bar) (lpm) (cpm) (kg) LVS-03T / Performance curves Pressure drop P (bar) A T P A Flow (lpm) P70

32 LIFT VALVE Normal closed KVS - 03 TL - N - A Aluminum alloy body Valve size 03: 3/8" 04: 1/" 3 Mounting type TL: Thread connection 4 N: Normal closed NO: Normal open 5 Voltage A11: A110V (50/60HZ) A: A0V (50/60HZ) D1: D1V D: D4V Max. Operating Max. Flow Rated Flow Weight Pressure (bar) (lpm) (lpm) (kg) KVS-03TL KVS-04TL / Performance curves Pressure drop P (bar) KVS-03TL A T P A Flow (lpm) Pressure drop P (bar) KVS-04TL A T P A Flow (lpm) Holes for bolt fixing: -ø7 Through P71

33 LIFT VALVE P T HV073 - T 03 - N - - A Aluminum alloy body an be mounted on gear pump HGP-A Thread connection type 3 Port size 03: PT 3/8" 4 N: Normal closed NO: Normal open 5 None: General use OM: With manual actuator 6 Voltage A11: A110V (50/60HZ) A: A0V (50/60HZ) D1: D1V D: D4V Max. Operating Max. Flow Rated Flow Weight Pressure (bar) (lpm) (lpm) (kg) HV (inch) P7

34 LIFT VALVE P T HV074 - T 03 - N - - A Aluminum alloy body Thread connection type 3 Port size 03: PT 3/8" 4 N: Normal closed NO: Normal open 5 None: General use OM: With manual actuator 6 Voltage A11: A110V (50/60HZ) A: A0V (50/60HZ) D1: D1V D: D4V Max. Operating Max. Flow Rated Flow Weight Pressure (bar) (lpm) (lpm) (kg) HV (inch) P73

35 LIFT VALVE P T HV T 04 - N - - A Aluminum alloy body Thread connection type 3 Port size 04: PT 1/" 4 N: Normal closed NO: Normal open 5 None: General use OM: With manual actuator 6 Voltage A11: A110V (50/60HZ) A: A0V ( 50/60HZ) D1: D1V D: D4V Max. Operating Max. Flow Rated Flow Weight Pressure (bar) (lpm) (lpm) (kg) HV (inch) 6 PT 1/ A ø43.8 V PT 1/ 15 PT 1/ 8.5 T P PT 1/4 G P RV /4-16UNF-B ø6 x 55L P74

36 LIFT VALVE VLT Manual actuating Port size 03: 3/8" Max. Operating Max. Flow Rated Flow Weight Pressure (bar) (lpm) (lpm) (kg) VLT (inch) P75

37 hose burst protection valve B VALVE LF LIFTING VALVE HOSE V P T FUNTION: Under normal operation conditions, this valve is normally open. When the system flow going through this valve has a sudden increase over the preset flow velocity level due to system failure, hose burst, or over-load, this valve will shut off automatically to provide safety for operators. FEATURES: The desired flow rate is adjustable and can be preset. ompact design provides ease for installation. If port is mounted directly to T cylinder, the result is even better. A B D E F G H I J Max. Operating Max. Flow Weight Pressure (bar) (lpm) (kg) VF PT3/8" VF PT1/" VF PT3/4" VF PT1" VF-30, 80, 10 VF-160 P76

38 HOSE BURST PROTETION VALVE Popt Size VAS-0 G 1/4" Max. Pressure (bar) Max. Flow (lpm) Weight (kg) VAS-03 G 3/8" VAS-04 G 1/" VAS-06 G 3/4" VAS-08 G 1" / Performance curves (inch) A B D VAS-0 G 1/4" G 1/4" 19 (0.75") 66 (.6") VAS-03 G 3/8" G 3/8" (0.86") 70 (.76") VAS-04 G 1/" G 1/" 7 (1.06") 80 (3.15") VAS-06 G 3/4" G 3/4" 3 (1.6") 100 (3.94") VAS-08 G 1" G 1" 46 (1.81") 115 (4.53") VAS-0 VAS-04 VAS-08 VAS-03 VAS-06 P77