P.C. Priority Flow Control Valve Series J02D3. General Description

Transcription

1 CV Catalog HY15-352/US General Description Needle Type, Compensated Regulator Valve. For additional information see Tips on pages 1-4. P.C. Priority Control Valve Series J2D3 Features Good adjustment from 1-15 LPM (.3-4 GPM) Used for systems requiring priority flow such as steering systems Hardened working parts for maximum durability Reverse flow function 3 to 1 Adjustable and tamperproof versions available All external parts zinc plated Specifications Rated Maximum Inlet Cartridge Material Operating Temp. Range/Seals Fluid Compatibility/ Viscosity 15 LPM (4 GPM) 42 Bar (6 PSI) All parts steel. All operating parts hardened steel. -4 C to C (Nitrile) (-4 F to +2 F) C to C (Fluorocarbon) (-25 F to +25 F) Mineral-based or synthetic with lubricating properties at viscosities of 45 to 2 SSU (6 to 42 cst) Filtration ISO Code 16/13, SAE Class 4 or better Approx. Weight.8 kg (.18 lbs.) Cavity C8-3 (See Section for more details) Form Tool Rougher NFT8-3R Finisher NFT8-3F Performance Curves (Through cartridge only) Regulating Performance Regulated Bypass 2 > Regulated 3 Regulated 3 > Bypass 2 Bar PSI Drop Application OTHER SERVIS Hydraulic Oil 15 1 F (32 cst) INT FLOW 2 LPM (5.3 GPM) Priority flow on steering circuit 29

2 Catalog HY15-352/US P.C. Priority Control Valve Series J2D3 CV Dimensions Millimeters (Inches) 2.5 (.81) max 5 AF Hex socket Rotate adjuster CW to decrease flow or CCW to increase flow. 22 (.87) 17 AF Hex. 12 Nm (9 lb. ft.) 22 AF Hex. 4 Nm (3 lb. ft.) 41.2 (1.62) 3/4" - 16 UNF Ordering Information J2D3 Compensated Priority Control Valve Adjustment Style Optional Setting Seals Body Material Port Size Code Adjustment Style Z Screw Adjust (Std.) W Knob Adjust T Tamper Resistant Cap (TC113) Code Optional Setting Omit Omit for no setting* Specify setting if required (LPM) * Appropriate mid-range setting for Standard = 7 LPM Code Seals / Kit. No. N Nitrile, Buna-N (Std.)/ (SK351N-1) V Fluorocarbon / (SK351V-1) Code Body Material Omit Steel A Aluminum Code Port Size Body Part No. Omit Cartridge Only 4P 1/4 NPTF (B8-3-*4P) 4T SAE-4 (B8-3-*4T) 6T SAE-6 (B8-3-*6T) 6B 3/8 BSPG (B8-3-*6B) * Add A for aluminum, omit for steel. 3

3 CV Catalog HY15-352/US General Description Compensated Priority Regulator Valve. For additional information see Tips on pages 1-4. Caution: If the priority line is blocked so that no flow can pass through the control orifice; the compensator spool will shift, blocking the bypass port and allowing inlet pressure to go to full system relief pressure. The FP11 cartridge does not provide a pressure relieving function. Specifications Maximum Fixed 3. LPM (8 GPM) Priority Adjusted 33.8 LPM (9 GPM) Maximum Inlet Minimum Inlet Maximum Inlet Minimum Inlet Accuracy (Fixed) ±2% Adjustment Range (Adj. Version) Cartridge Material Operating Temp. Range/Seals Fluid Compatibility/ Viscosity 56.3 LPM (15 GPM) See Valve Performance Curves 245 Bar (35 PSI) See Valve Performance Curves ±2% Nominal All parts steel. All operating parts hardened steel. -4 C to C (Nitrile) (-4 F to +2 F) C to C (Fluorocarbon) (-25 F to +25 F) Mineral-based or synthetic with lubricating properties at viscosities of 45 to 2 SSU (6 to 42 cst) Filtration ISO Code 16/13, SAE Class 4 or better Approx. Weight.23 kg (.5 lbs.) Cavity No. C1-3 (See Section for more details) Form Tool Regulator NFT1-3R Finisher NFT1-3F P.C. Priority Regulator Valve Series FP11 Features Hardened, precision ground parts for durability Cartridge design Acts as a fixed orifice in reverse flow condition (Priority line only) All external parts zinc plated Dimensions Millimeters (Inches) Screw and Knob Adjust - 1/4" Hollow Hex. 1" Hex. 22 Nm (16 lb. ft.) 7/8-14 UNF-2A Thread Priority Bypass 15.8 (.62) Inlet (3.36) (2.8) 17.4 (.68) Priority Bypass Inlet 38.1 (1.5) Dia. Knob 46.2 (1.82) Rotate adjuster CW to increase priority flow or CCW to decrease priority flow. Fixed Style 21.8 (.86) 1" Hex. 22 Nm (16 lb. ft.) 7/8-14 UNF-2A Thread Inlet THIRD-ANG PROJECTION 31

4 Catalog HY15-352/US Performance Curves (Through cartridge only) Regulated vs. Load Hydraulic Oil 15 1 F (32 cst) 8 3. P.C. Priority Regulator Valve Series FP vs. Priority Minimum Operating Hydraulic Oil 15 1 F (32 cst) CV (Q) Priority Regulated Bar PSI Load Load on Bypass Port - Bar Load on Priority Port - Bar Minimum Inlet Hydraulic Oil 15 1 F (32 cst) Inlet s LPM GPM Minimum Inlet (Shaded Area) Regulated Bar PSI Minimum Operating Inlet vs. Regulated Hydraulic Oil 15 1 F (32 cst) Fixed Style LPM GPM Inlet Ordering Information FP11 1 Size Compensated Regulator Code Adjustment Style F Fixed Style present at factory K Knob Adjust S Screw Adjust Adjustment Style Setting/ Range Seals Code Fixed Style LPM (1 GPM) LPM (2 GPM) LPM (3 GPM) 4 15 LPM (4 GPM) LPM (5 GPM) LPM (6 GPM) LPM (7 GPM) 8 3 LPM (8 GPM) Code Seals / Kit. No. Omit Nitrile / (SK1-3N) V Fluorocarbon / (SK1-3V) Body Material Port Size Code Knob/Screw Style Range LPM (.7-1. GPM) LPM ( GPM) LPM ( GPM) LPM ( GPM) LPM ( GPM) LPM ( GPM) LPM ( GPM) LPM ( GPM) Code Body Material Omit Steel A Aluminum Code Port Size Body Part No. Omit Cartridge Only 4P 1/4 NPTF (B1-3-*4P) 6P 3/8 NPTF (B1-3-*6P) 8P 1/2 NPTF (B1-3-*8P) 6T SAE-6 (B1-3-*6T) 8T SAE-8 (B1-3-*8T) 6B 3/8 BSPG (B1-3-6B) 8B 1/2 BSPG (B1-3-*8B) * Add A for aluminum, omit for steel. Steel body only. 32

5 CV Catalog HY15-352/US General Description Priority Type, Compensated Regulator Valve. For additional information see Tips on pages 1-4. P.C. Priority Control Valve Series J4D3 Features High flow capacity Good adjustment from 2-45 LPM (.5-12 GPM) Used for systems requiring priority flow such as steering systems Hardened working parts for maximum durability Reverse flow function 3 to 1 Adjustable and tamperproof versions available All external parts zinc plated Specifications Rated Maximum Inlet Cartridge Material Operating Temp. Range/Seals Fluid Compatibility/ Viscosity 45 LPM (12 GPM) 42 Bar (6 PSI) All parts steel. All operating parts hardened steel. -4 C to C (Nitrile) (-4 F to +2 F) C to C (Fluorocarbon) (-25 F to +25 F) Mineral-based or synthetic with lubricating properties at viscosities of 45 to 2 SSU (6 to 42 cst) Filtration ISO Code 16/13, SAE Class 4 or better Approx. Weight.18 kg (.4 lbs.) Cavity C1-3 (See Section for more details) Form Tool Rougher NFT1-3R Finisher NFT1-3F Performance Curves (Through cartridge only) Application OTHER SERVIS Regulating Performance Regulated Bypass 2 > Regulated 3 Regulated 3 > Bypass 2 Bar PSI Drop Hydraulic Oil 15 1 F (32 cst) INT FLOW 7 LPM (18.5 GPM) Priority flow on steering circuit 33

6 Catalog HY15-352/US P.C. Priority Control Valve Series J4D3 CV Dimensions Millimeters (Inches) 24 (.94) 24.7 (.97) max 5 AF Hex socket Rotate adjuster CW to decrease priority flow or CCW to increase priority flow. 17 AF Hex. 12 Nm (9 lb. ft.) 26 AF Hex. 5 Nm (37 lb. ft.) 47.3 (1.86) 7/8" - 14 UNF Ordering Information J4D3 Compensated Priority Control Valve Adjustment Style Optional Setting Seals Body Material Port Size Code Adjustment Style Z Screw Adjust (Std.) W Knob Adjust (A14975) T Tamper Resistant Cap (TC113) Code Optional Setting Omit Omit for no setting* Specify setting if required (LPM) * Appropriate mid-range setting for Standard = 2 LPM Code Seals / Kit. No. N Nitrile, Buna-N (Std.)/ (SK355N-1) V Fluorocarbon / (SK355V-1) Code Body Material Omit Steel A Aluminum Code Port Size Body Part No. Omit Cartridge Only 4P 1/4 NPTF (B1-3-*4P) 6P 3/8 NPTF (B1-3-*6P) 8P 1/2 NPTF (B1-3-*8P) 6T SAE-6 (B1-3-*6T) 8T SAE-8 (B1-3-*8T) 6B 3/8 BSPG (B1-3-6B) 8B 1/2 BSPG (B1-3-*8B) * Add A for aluminum, omit for steel. Steel body only. 34

7 CV Catalog HY15-352/US General Description Priority Style, Compensated Regulator Valve With Bypass. For additional information see Tips on pages 1-4. P.C. Priority Control Valve Series J1A125 Features Free reverse flow function High flow capacity Used for systems requiring priority flow such as steering systems Hardened working parts for maximum durability Adjustable and tamperproof versions available All external parts zinc plated Specifications Rated Maximum Regulated Maximum Inlet Cartridge Material Operating Temp. Range/Seals Fluid Compatibility/ Viscosity 9 LPM (24 GPM) 38 LPM (1 GPM) 35 Bar (5 PSI) All parts steel. All operating parts hardened steel. -4 C to C (Nitrile) (-4 F to +2 F) C to C (Fluorocarbon) (-25 F to +25 F) Mineral-based or synthetic with lubricating properties at viscosities of 45 to 2 SSU (6 to 42 cst) Filtration ISO Code 16/13, SAE Class 4 or better Approx. Weight Cavity Form Tool.45 kg (1. lbs.) 3A (See Section for more details) Rougher Finisher Performance Curve (Through cartridge only) Regulating Performance Regulated Hydraulic Oil 15 1 F (32 cst) Bypass 2 > Regulated 3 Regulated 3 > Bypass 2 Bar PSI Drop Application INT FLOW 125 LPM (33 GPM) OTHER SERVIS Priority flow on steering circuit 35

8 Catalog HY15-352/US P.C. Priority Control Valve Series J1A125 CV Dimensions Millimeters (Inches) 4 AF Hex socket 24. (.94) 16. (.63) max Rotate adjuster CW to decrease priority flow or CCW to increase priority flow. 13 AF Hex. 1 Nm (7 lb. ft.) 35 AF Hex. 85 Nm (63 lb. ft.) 1-3/16" - 12 UNF 74. (2.91) Ordering Information J1A125 Compensated Priority Control Valve Adjustment Style Optional Regulated Setting Seals Code Adjustment Style Z Screw Adjust (Std.) W Knob Adjust T Tamper Resistant Cap (TC1124) Code Optional Regulated Setting Omit Omit for no setting (Std.)* Specify setting if required (LPM) * Setting for standard: J1A125 Inlet: 45 LPM (12 GPM) Regulated: 25 LPM (6.5 GPM) Code Seals / Kit. No. N Nitrile, Buna-N (Std.)/ (SK311N-1) V Fluorocarbon / (SK311V-1) Order Bodies Separately LB1 Line Body Code Porting 7 3/4 BSP 66 1 SAE Porting Body Material Code Body Material A Aluminum S Steel 36