Pressure Control Valves Series R. General Description. Specifications. Flow Data
|
|
|
- Oswin Baldwin
- 6 years ago
- Views:
Transcription
1 Catalog Y /US Technical Information Series R General Description Series R direct relief valves limit system pressure by opening to tank when system pressure reaches the valve setting. Specifications Pressure Code M: Bar ( PSI) Adjustment Code F: Bar ( PSI) Range* Code : Bar ( PSI) Maximum Operating 205 Bar (3000 PSI) Pressure Flow Rate 3.78 LPM (1 GPM) minimum Minimum 10.2 Bar (150 PSI) minimum Pressure with rated flow, 150 SSU oil and Setting fluid temperature of 38 C (100 F) Note: Change in flow, temperature or fluid (SSU) rating will affect valve minimum pressure. * See Ordering Information Flow Data p65, dd 7 Parker annifin Corporation ydraulic Valve Division
2 Catalog Y /US Ordering Information Series R Omit V Nitrile Fluorocarbon Weight: R6P 4.0 kg (9.0 lbs.) R6V 6.8 kg (15.0 lbs.) R6S 4.0 kg (9.0 lbs.) R10P 7.7 kg (17.0 lbs.) R10M 9.5 kg (21.0 lbs.) R10S 7.7 kg (17.0 lbs.) p65, dd 8 Parker annifin Corporation ydraulic Valve Division
3 Catalog Y /US Ordering Information Series R Relief Valve with Tri-Pressure Feature R Relief Valve 2P 2M 6P 6V 6S 10P 10M 10S Size Control Style Solenoid Solenoid Connection Solenoid Modifications Variations Vent Styles Seals Range* 1/4" NPTF ports 1/4" Subplate mounted 3/4" NPTF In-line 3/4" Subplate (Ind. Std.) 1 1/16-12 Std. thread 1 1/4" NPTF In-line 1 1/4" Subplate (Ind. Std.) 1 5/8-12 Straight thread C P W Conduit Box DIN with Plug DIN without Plug Omit V Design Series NOTE: Not required when ordering. Nitrile Fluorocarbon Omit Low vent (std.) 8* igh vent * not available on R2M or R2P D Vent 150 to 3000 PSI F 150 to 2000 PSI M 150 to 1000 PSI * Select two ranges for bi-pressure and three for tri-pressure Omit J K T Y No Solenoids 24 VDC 12 VDC 240/60 220/50 VAC 120/60 110/50 VAC L 8 Watt Coil DC Coils only F Low Amp Coil AC Coils only * See Series D1VW Solenoid Electrical Characteristic Chart for additional information Omit Standard Valve 5 Signal lights 6 Manplug single solenoid 3; double solenoid 5 1A Manaplug single solenoid 5 pin See D1VW Ordering Code for more variations. Weight: R2P (Bi-Press.) R2M (Bi-Press.) R2P (Tri-Press.) R2M (Tri-Press.) R6P (Bi-Press.) R6V (Bi-Press.) R6P (Tri-Press.) R6V (Tri-Press.) R10P (Bi-Press.) R10M (Bi-Press.) R10P (Tri-Press.) R10M (Tri-Press.) 2.2 kg (5.0 lbs.) 1.8 kg (4.0 lbs.) 2.5 kg (5.5 lbs.) 2.0 kg (4.5 lbs.) 5.4 kg (12.0 lbs.) 8.1 kg (18.0 lbs.) 6.3 kg (14.0 lbs.) 9.0 kg (20.0 lbs.) 9.0 kg (20.0 lbs.) 10.8 kg (24.0 lbs.) 9.9 kg (22.0 lbs.) 11.8 kg (26.0 lbs.) p65, dd 9 Parker annifin Corporation ydraulic Valve Division
4 Catalog Y /US Ordering Information Series R Relief Valve with Dual Pressure Feature R Relief Valve 6P 6V 6S 10P 10M 10S Size Control Solenoid Solenoid Solenoid Variations Range Vent Seals Style Connection Modifications Styles 3/4" NPTF In-line 3/4" Subplate (Ind. Std.) 1 1/16-12 Std. thread 1 1/4" NPTF In-line 1 1/4" Subplate (Ind. Std.) 1 5/8-12 Straight thread C P W Conduit Box DIN with Plug DIN without Plug Omit V Design Series NOTE: Not required when ordering. Nitrile Fluorocarbon Omit Low vent (std.) 8 igh vent F M 150 to 3000 PSI 150 to 2000 PSI 150 to 1000 PSI Omit J K T Y No Solenoids 24 VDC 12 VDC 240/60 220/50 VAC 120/60 110/50 VAC Omit Standard Valve 5 Signal lights 6 Manplug single solenoid 3; double solenoid Manaplug single solenoid 5 pin See D1VW Ordering Code for more variations. L F 8 Watt Coil DC Coils only Low Amp Coil AC Coils only * See Series D1VW Solenoid Electrical Characteristic Chart for additional information Weight: R6P (Single) R6S (Single) R6V (Single) R6P (Double) R6V (Double) R10M (Single) R10P (Single) R10S (Single) R10M (Double) R10S (Double) 6.5 kg (14.5 lbs.) 6.5 kg (14.5 lbs.) 6.5 kg (14.5 lbs.) 6.8 kg (15.0 lbs.) 6.8 kg (15.0 lbs.) 10.8 kg (24.0 lbs.) 9.0 kg (20.0 lbs.) 9.0 kg (20.0 lbs.) 11.1 kg (24.5 lbs.) 9.3 kg (20.5 lbs.) p65, dd 10 Parker annifin Corporation ydraulic Valve Division
5 Catalog Y /US Performance Curves Series R 69 Bar (1000 PSI) p65, dd 11 Parker annifin Corporation ydraulic Valve Division
6 Catalog Y /US Series R2M Manifold mounted, 1/4" Bi-pressure Relief Valve (pressure 7) p65, dd 12 Parker annifin Corporation ydraulic Valve Division
7 Catalog Y /US Series R2M Manifold mounted, 1/4" Tri-pressure Relief Valve (pressure 8) p65, dd 13 Parker annifin Corporation ydraulic Valve Division
8 Catalog Y /US Series R2P In-line mounted, 1/4" Bi-pressure Relief Valve (pressure 7) p65, dd 14 Parker annifin Corporation ydraulic Valve Division
9 Catalog Y /US Series R2P In-line mounted, 1/4" Tri-pressure Relief Valve (pressure 8) p65, dd 15 Parker annifin Corporation ydraulic Valve Division
10 Catalog Y /US Series R6P, R6S In-line mounted, 3/4" solenoid operated Relief Valve p65, dd 16 Parker annifin Corporation ydraulic Valve Division
11 Catalog Y /US Series R6P, R6S In-line mounted, 3/4" solenoid operated Relief Valve (pressure 7) p65, dd 17 Parker annifin Corporation ydraulic Valve Division
12 Catalog Y /US Series R6P, R6S In-line mounted, 3/4" solenoid operated Tri-pressure Relief Valve (pressure 8) p65, dd 18 Parker annifin Corporation ydraulic Valve Division
13 Catalog Y /US Series R6P, R6S In-line mounted, 3/4" pilot operated Pressure Relief Valve p65, dd 19 Parker annifin Corporation ydraulic Valve Division
14 Catalog Y /US Series R6V Industry standard, 3/4" solenoid operated Relief Valve p65, dd 20 Parker annifin Corporation ydraulic Valve Division
15 Catalog Y /US Series R6V Industry Standard, 3/4" solenoid operated Tri-pressure Relief Valve (pressure 8) p65, dd 21 Parker annifin Corporation ydraulic Valve Division
16 Catalog Y /US Series R6V Industry standard, 3/4" solenoid operated Bi-pressure Relief Valve (pressure 7) p65, dd 22 Parker annifin Corporation ydraulic Valve Division
17 Catalog Y /US Series R6V Manifold mounted, 3/4" pilot operated (industry standard) Pressure Relief Valve p65, dd 23 Parker annifin Corporation ydraulic Valve Division
18 Catalog Y /US Series R10M Manifold mounted, 1 1/4" solenoid operated Relief Valve p65, dd 24 Parker annifin Corporation ydraulic Valve Division
19 Catalog Y /US Series R10M Manifold mounted, 1 1/4" solenoid operated Bi-pressure Relief Valve (pressure 7) p65, dd 25 Parker annifin Corporation ydraulic Valve Division
20 Catalog Y /US Series R10M Manifold mounted, 1 1/4" solenoid operated Tri-pressure Relief Valve (pressure 8) p65, dd 26 Parker annifin Corporation ydraulic Valve Division
21 Catalog Y /US Series R10M Manifold mounted, 1 1/4" pilot operated Pressure Relief Valve p65, dd 27 Parker annifin Corporation ydraulic Valve Division
22 Catalog Y /US Series R10P, R10S In-line mounted, 1 1/4" solenoid operated Relief Valve M p65, dd 28 Parker annifin Corporation ydraulic Valve Division
23 Catalog Y /US Series R10P, R10S In-line mounted, 1 1/4" solenoid operated Bi-pressure Relief Valve (pressure 7) p65, dd 29 Parker annifin Corporation ydraulic Valve Division
24 Catalog Y /US Series R10P, R10S In-line mounted, 1 1/4" solenoid operated Tri-pressure Relief Valve (pressure 8) p65, dd 30 Parker annifin Corporation ydraulic Valve Division
25 Catalog Y /US Series R10P, R10S In-line mounted, 1 1/4" pilot operated Pressure Relief Valve p65, dd 31 Parker annifin Corporation ydraulic Valve Division
26 Catalog Y /US Series R Valve with Terminal Strip (Variation 5) 540 no longer available and/or valve with top side plug-on with lights (Variation 570) See D1VW Accessory section for Ordering Replacement Kits Valve with Manaplug Plug-in (Variation 6) Top Side Plug no longer available p65, dd 32 Parker annifin Corporation ydraulic Valve Division
Pressure Control Valves. General Description. Specifications. Ordering Information
Catalog HY14-3000/US Technical Information Control Valves Series RCP General escription Series RCP in-line pressure control valves are chiefly used as remote control valves. They limit system pressure
Manapak Sandwich Valves. General Description
echnical Information Series RM General Description RM Series relief valves limit system pressure by opening to tank when system pressure reaches the valve setting. With D3 size, they can also be configured
Pressure Compensator Valves Series R5P (SAE Flange Mounted) General Description. Features
Technical Information General Description Series R5P direct operated, 3-way pressure compensators can be combined with any type of fixed or adjustable flow resistor (throttle) to provide a load compensated
Directional Control Valves Series D111VW. General Description. Features. Performance Curves
Technical Information General valves are piloted by a D1VW valve. The valves can be ordered with position control. The minimum pilot pressure must be ensured for all operating conditions of the directional
Série D3 Válvula Direcional CETOP 5 e NG 10. Catálogo HY /US
Série D3 Válvula Direcional CETOP 5 e NG 10 Catálogo HY14-2502/US Catalog HY14-2502/US Introduction pplication Series D3 hydraulic directional control valves are high performance, direct operated 4-way
Bulletin HY M6/US Service Bulletin. Series D1VW, H Style 91 Design. Effective: May 1, Directional Control Valves
Service Bulletin 91 Design Effective: May 1, 2007 FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This
Bulletin HY M2/US Service Bulletin. Series D1VW, C Style 91 Design. Effective: May 1, Directional Control Valves
Service Bulletin 91 Design Effective: May 1, 2007 FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This
Industrial Hydraulic Valves. Directional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories. Catalog HY /US
Industrial Hydraulic Valves irectional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories Catalog HY14-25/US Industrial Hydraulic Valves WARNING USER RESPONSIBILITY FAILURE OR IMPROPER
INSTALLATION DIMENSIONS
ACCESSORIES & OTHERS PRESURE GAGE INSTALLATION DIMENSIONS UNIT mm(inch) LM TYPE CBM TYPE CBM-F TYPE MODEL B B1 D D1 D2 G H T d R G40LM 28.1(0.86) φ48(1.9) φ41.7(1.6) 8(0.31) 58.7(2.31) 1/8" G40CBM 26(1.02)
VSD10M DIRECTIONAL CONTROL VALVES SOLENOID ACTUATED, PILOT OPERATED
NFPA SIZE D10 TYPICAL PERFORMANCE SPECIFICATIONS Performance is measured on a four-way circuit (full circuit). Performance may be reduced from that shown if a three-way circuit (half circuit) is used,
D05 Directional Control Valves
Engineering D05 Directional Control Valves WFDG4S*4-01, 60 Design Wet Armature Solenoid Operated Max Pressure up to 248 Bar (3600 psi) Same Day Shipments www.fluidynefp.com Table of Contents Basic Characteristicts...2
Directional Control Valves. General Description. Operation. Features
echnical Information General Description W directional control valves are 5-chamber, pilot operated, solenoid controlled valves, hey are available in 2 or 3-position styles. hese valves are manifold or
NG06. General Size NG6 NG10 Design
Catalog HY14-255/US Series VY*K General Series VY*K pilot operated sequence valves feature proportional adjustment and an external drain. The external drain allows application as both a sequence valve
Directional Control Valves. General Description. Operation. Features
echnical Information Series D61VW General Series D61VW directional control valves are 5-chamber, pilot operated, solenoid controlled valves, hey are available in 2 or 3-position styles. hese valves are
Directional Control Valves Series D81V. General Description. Operation. Features. Specifications
echnical Information General Description W directional control valves are 5-chamber, pilot operated, solenoid controlled valves. hey are available in 2 or 3-position styles. hese valves are manifold or
Proportional Pressure Relief Valves Series R4V and R6V (Onboard Electronics) General Description. Features.
Catalog HY14-2/US Technical Information General Description Series R4V and R6V proportional pressure relief valves feature onboard electronics based on the functionality of the digital amplifier PCD. The
Directional Control Valves. General Description. Operation. Features
echnical Information Series D101VW General Series D101VW directional control valves are 5-chamber, pilot operated, solenoid controlled valves. hey are available in 2 or 3-position styles. hese valves are
Catalog HY /US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI
Catalog HY15-351/US Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI PRESSURE RELIEVING AP1B2YP... 2G... Increase /Increase Current...5.3/1.4... 35/5... 7-8 AP2A2... C8-2... Increase
Catalog HY /US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI
Catalog HY15-352/US Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI PRESSURE RELIEVING AP1B2YP... 2G... Increase /Increase Current...5.3/1.4... 35/5... 7-8 AP2B2YP... C8-2...
Directional Control Valves. Application. Features. Operation
Catalog HY14-2502/US Introduction pplication Series D81 hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or
LOAD SENSE SECTIONS. Series 20. Directional Control Valves NEED NEW PIC VALVES STANDARD FEATURES SPECIFICATIONS
Directional Control Valves LOAD SENSE SECTIONS NEED NEW PIC Series 20 STANDARD FEATURES Control and reduced Dead Band (20I) and Tie Rod Kits SPECIFICATIONS Pressure Rating Foot Mounting Maximum Operating
Pilot Operated Pressure Relief Valve Series R5V (Denison)
Characteristics Pilot operated pressure relief valves series R5V have a similar design to the subplate mounted R4V series. The SAE flanges allow to mount the valves directly on the outlet flanges of pumps
P.C. Priority Flow Control Valve Series J02D3. General Description
CV Catalog HY15-352/US General Description Needle Type, Compensated Regulator Valve. For additional information see Tips on pages 1-4. P.C. Priority Control Valve Series J2D3 Features Good adjustment from
Operation. D3W Solenoid Operated Conduit Box Style. D3W Solenoid Operated Hirschmann (DIN) Style
Catalog HY14-252/US Introduction pplication arker D3 Series hydraulic directional control valves are high performance, direct operated 4-way valves, available in 2 or 3 position. hey are manifold mounted
Industrial Hydraulic Valves. Directional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories. Catalog HY /US
LH SECION Industrial Hydraulic Valves Directional Control, ressure Control, Sandwich, Subplates & Manifolds, ccessories echnical Information General Description Series D61VW directional control valves
Directional Control Valves. Features. Application. Operation
Catalog HY14-2502/US Introduction pplication Series D31 hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage 4-way valves. hey are available in 2 or 3-
Directional Control Valves. General Description. Features. Specifications
Technical Information General Description directional control valves are high-performance, 4-chamber, direct operated, wet armature, solenoid controlled, 3 or 4-way valves. They are available in 2 or 3-position
Directional Control Valves
echnical Information General Description he D1VW Series directional control valves are highperformance, 4-chamber, direct operated, wet armature solenoid controlled, 3 or 4-way valves. hey are available
Directional Control Valves. Application. Features. Operation
Catalog HY14-2500/US Introduction pplication Series D81 hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or
Directional Control Valves. Application. Features. Operation.
Catalog HY14-2500/US Introduction pplication Series D101 hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or
NG6. Proportional adjustment. Manifold mounting acc. to ISO External drain. Main stage spool type valve. Pilot stage seated type valve.
Catalog HY14-255/US Technical Information Series VY*K General Description Series VY*K pilot operated sequence valves feature proportional adjustment and an external drain. The external drain allows application
Proportional Directional Control Cartridge Valves: PSV10-34 & PSV12-34
Control Cartridge Valves: PSV10-34 & PSV12-34 SCHEMATIC PRESSURE* FLOW CAVITY COIL Page 2 PSV10-34-02 250 BAR 3600 PSI 22 LPM 6 GPM SDC10-4 M16-26W R16-20W Page 4 PSV12-34-02 260 BAR 3770 PSI 50 LPM 13
Operation. D1VW Solenoid Operated Plug-In Conduit Box Style
Introduction pplication hydraulic directional control valves are high performance, direct operated 4-way valves. hey are available in 2 or 3-position styles. hey are manifold mounted valves, which conform
Flow Control Valves Check Valves Gauge Control Valves. Colorflow Valves
Check Valves Gauge Control Valves Colorflow Valves Colorflow and Ball Valves Industrial Flow Control, Check, Gauge Control Catalog HY14-3300/US Colorflow and Ball Valves Fully guided poppets are used on
Directional Control Valves. Features. Application. Operation
Introduction pplication hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or 3-position styles and are manifold
Sandwich Valves Series CP
Technical Information General Description. pilot operated check valves are designed for maximum flow rates. The valves are typically used in combination with spool type directional control valves to ensure
SV SOLENOID OPERATED
Directional Control Valves SV Work Sections Type -T Solenoid Operated Type -S Solenoid and Manual Operation STANDARD FEATURES Open center or closed center applications Port relief options available Internal
High Pressure Ball Valves Series BVAH. General Description. Operating. Specifications. Features. Performance Curves
Technical Information General Description are 414 Bar (6000 PSI) ball valves with ports from 1¼" to 2". are 2-way shut-off valves to use in those applications with large ports. A variety of porting options
ANTI-SHOCK DIRECTIONAL CONTROL VALVES
ACTUATED, DIRECT OPERATED TYPICAL PERFORMANCE SPECIFICATIONS Performance is measured on a four-way circuit (full circuit). Performance may e reduced from that shown if a three-way circuit (half circuit)
PILOT OPERATED PRESSURE RELIEF VALVE - Series VR4V
PILOT OPERTED PRESSURE RELIEF VLVE - Series VR4V The Veljan Pressure Relief Valve series VR4V are pilot operated and work Internal Dra on the prciple of hydraulic balancg. These valves are used to limit
PILOT OPERATED PRESSURE RELIEF VALVE - Series VR4V
PILOT OPERTED PRESSURE RELIEF VLVE - Series VR4V The Veljan Pressure Relief Valve series VR4V are pilot operated and work Internal Dra on the prciple of hydraulic balancg. These valves are used to limit
High Pressure Ball Valves Series BVHP. General Description. Operating. Specifications. Features. Performance Curves
Technical Information igh Pressure all Valves eries VP General Description eries VP valves are used for shut-off applications and are rated at 414 ar (6000 PI). The wide variety of porting options plus
CVH103P. Check Valve Series CVH103P. Technical Information. General Description
Catalog HY-351/US Information Cartridge Style Valve. For additional information see Tips on pages 1-4. Valve Series H13P Spherical poppet for low leakage D -Ring eliminates back-up rings Dual sense paths
Operation. D1VW Solenoid Operated Plug-In Conduit Box Style
Catalog HY14-2500/US Introduction pplication hydraulic directional control valves are high performance, direct operated 4-way valves. hey are available in 2 or 3-position styles. hey are manifold mounted
Operation. D1VW Solenoid Operated Plug-In Conduit Box Style
Introduction pplication hydraulic directional control valves are high performance, direct operated 4-way valves. hey are available in 2 or 3-position styles. hey are manifold mounted valves, which conform
550 Series Hydraulic Power Units. Pressures to 207 bar (3000 psi) Flows to 11.4 lpm (3 gpm)
Pressures to 207 bar (3000 psi) Flows to 11.4 lpm (3 gpm) 19 Power Unit Features We are pleased to introduce our new C hydraulic power units. The combines the features and benefits our customers and markets
Industrial Hydraulic Valves. Directional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories. Catalog HY /US
LH Industrial Hydraulic Valves Directional Control, ressure Control, Sandwich, Subplates & Manifolds, ccessories Catalog HY14-2500/US echnical Information General Description Series D1VW directional control
Directional Control Valves. Application. Features. Operation. D3W Solenoid Operated Conduit Cavity Style. D3W Solenoid Operated Hirschmann (DIN) Style
Catalog HY14-2500/US Introduction pplication Series D3 hydraulic directional control valves are high performance, direct operated 4-way valves, available in 2 or 3-position. hey are manifold mounted which
PILOT OPERATED SEQUENCE VALVE - Series VR4S
PILOT OPERTED SEQUENCE VLVE - Series VRS Veljan Sequence Valve Series VRS are pilot operated controls and enable a hydraulic system to operate a sequence. Fluid is allowed to pass to a secondary system
Centro-Matic Automatic Lubrication Systems FlowMaster Hydraulic Pump
FlowMaster Hydraulic Pump High-performance FlowMaster hydraulic pumps combine rotary-driven pump motors with reciprocating pump tubes and flexible control features that perform in desert heat and arctic
Technical Information Features Fast Response - Bubble Tight Sealing Small Size - 4 Inches High Single Solenoid - Only 3 Moving Parts Pilot Interchange
Model Number Index Function / Mounting Style N195 4-Way Line Mounting N205 4-Way Non Plug-In Manifold Mounted N215 4-Way Plug-In Manifold Mounted Line Mounting, Non Plug-In, Manifold Mounting Function
PACKED SPOOL 4-WAY DIRECTIONAL CONTROL VALVE.
PACKED SPOOL 4-WAY DIRECTIONAL CONTROL VALVE www.elwood.com 0 0 1 : 0 0 0 C E R T I F I E D C O M P A N Y 4-Way 3-Postion Valve 4-WAY, 3-POSITION DIRECTIONAL VALVE, AIR SOLENOID OPERATED SHOWN; DIRECT
Industrial Hydraulic Valves. Directional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories. Catalog HY /US
LH Industrial Hydraulic Valves Directional Control, ressure Control, Sandwich, Subplates & Manifolds, ccessories Catalog HY14-2500/US Industrial Hydraulic Valves LH WRNING USER RESONSIILIY FILURE OR IMROER
Colorflow and Ball Valves. Industrial Flow Control, Check, Gauge Control. Catalog HY /US
Colorflow and Industrial Flow Control, Check, Gauge Control Catalog HY14-3300/US Colorflow and Fully guided poppets are used on Colorflow valves rather than the less durable ball-check type construction.
Industrial Hydraulic Valves. Directional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories. Catalog HY /US
Industrial Hydraulic Valves Directional Control, ressure Control, Sandwich, Subplates & Manifolds, ccessories Catalog HY14-2500/US Industrial Hydraulic Valves WRNING USER RESONSIILIY FILURE OR IMROER SELECION
Series PVP Variable Volume Piston Pumps
Series PVP Variable Volume Piston Pumps Catalog HY28-2661-CD/US zp2 hpm12-1.p65, lw, jk 1 Notes Series PVP hpm12-1.p65, lw, jk 2 Introduction Series PVP Series Sizes 6-14 Phased Out For Reference Only
Pressure Control Valves
Catalog HY15-351/US Contents RELIEF VALVES SEQUEN VALVES Control SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. /GPM BAR/ DIRECT ACTING RDH42... C4-2... Direct Acting Relief, Poppet Type... 3.8/1...
Directional Control Valves. Features. Application. Operation
Introduction pplication Series D31 hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or 3-position styles and
Bladder Accumulators. Bladder Accumulators Introduction. Bladder IN THIS SECTION. Features. Models, Capacities & Dimensions. 10 cu in to 15 gallons
Overview ntroduction N TS SECTON Overview 51 Specifications 52, Capacities & Dimensions Bottom Repairable 54 Top Repairable 55 igh-flow 56 Transfer Barrier 57 Bottles 58 Options & Accessories 59 Replacement
Directional Controls. Air Gap, Solenoid Controlled, Pilot Operated Directional Control Valves DG5S4(L)-10*D(X)-*-*-53. Service Data Vickers I-3625-S
Service Data Vickers Directional Controls Air Gap, Solenoid Controlled, Pilot Operated Directional Control Valves DG5S4(L)-10*D(X)-*-*-53 Revised 9/1/86 I-3625-S Model DG5S4-100D-53 DG5S4-101D-53 DG5S4-102D-53
PRPM2-A. = 5.5 Nm (4.1 lb.-ft.) (qual. 8.8 Nm (6.5 lb.-ft.) for socket cap screws. = 50 Nm (36.9 lb.-ft.) for cartridges
Technical Information General Description proportional pressure reducing valves keep a constant pressure p red on the secondary, or regulated, side, independent of pressure fluctuations on the primary
Power Units. Page. (M) = Mobile (I) = Industrial (B) = Mobile & Industrial
Power Units Page (M) = Mobile (I) = Industrial () = Mobile & Industrial (I) 143-144 (I) 145-152 (I) 145-152 (I) 145-152 Power Units (Industrial) D-Pak 5 Gallon D-Pak style power units are ideal for many
Large Electronically Adjustable Proportional Pressure Compensated Flow Control Engineering & Manufacturing Solutions
Engineering & Manufacturing Solutions LEFC Specifications: See flow chart for capacity. Max. 3000 psi cartridge input pressure. Nominally Rated for 3000 psi (207 bar). Tank Port - #4 SAE (10 psi (0.69
VER03MP CONTINENTAL HYDRAULICS PROPORTIONAL PRESSURE RELIEF VALVES PILOT OPERATED VER03MP - PROPORTIONAL PRESSURE RELIEF VAVLES PILOT OPERATED
CONTINENTAL HYDRAULICS VER03MP PROPORTIONAL PRESSURE RELIEF VALVES PILOT OPERATED VER03MP - PROPORTIONAL PRESSURE RELIEF VAVLES PILOT OPERATED 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400
VER03M CONTINENTAL HYDRAULICS PROPORTIONAL PRESSURE RELIEF VALVES VER03M - PROPORTIONAL PRESSURE RELIEF VALVES
CONTINENTAL HYDRAULICS VER03M PROPORTIONAL PRESSURE RELIEF VALVES 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM ACCURATE VER03M PROPORTIONAL PRESSURE RELIEF
MPD Series. Medium Pressure Duplex
Medium Pressure Duplex 89 Applications of MPD Circulating Lube Oil Systems Power Generation Control Systems Steel Mill Control Systems Pulp & Paper Control Systems Test Stands Automotive Stamping Presses
Vickers Pressure Relief Solenoid Operated, Two-Stage Directional Control Valve DG5S4-02 Flows to 115 l/min (30 USgpm) Pressure to 210 bar (3000 psi)
Vickers Pressure Relief Solenoid Operated, Two-Stage Directional Control Valve DG5S4-02 Flows to 115 l/min (30 USgpm) Pressure to 210 bar (3000 psi) Revised 2/93 GB C 2037 Table of Contents Model Code...................................................................................................
DMH085** Series will be available January 1, Catalog HY /US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO.
Catalog HY-/US Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. /GPM BAR/PSI DL8... C8-... Position, Way, N.C. Poppet,... Pull to Open.../8... /... DL... C-... Position, Way, N.C. Poppet,... Pull
Pilot Operated Directional Control Valves Series D31DW, D31NW, D*1VW
Characteristics The pilot operated valves are available in 4 sizes: D31DW NG10 (standard) D31NW NG10 (high flow) D41VW NG16 D81VW NG5 (for port diameter up to 6 mm) D91VW NG5 (for port diameter up to 3
MPD Series. Medium Pressure Duplex
Medium Pressure Duplex 81 Applications of MPD Circulating Lube Oil Systems Power Generation Control Systems Steel Mill Control Systems Pulp & Paper Control Systems Test Stands Automotive Stamping Presses
Proportional Directional Control Valves Series D*1FB. General Description. Features D91FB OBE
Technical Information Series D*1FB General Description Series D*1FB pilot operated proportional directional valves come in 4 sizes: D31FB NG10 (CETOP 5) D41FB NG16 (CETOP 7) D91FB NG25 (CETOP 8) D111FB
High Speed Hydraulic Motors. Catalog HY /NA zm16 zm17
High Speed Hydraulic Motors Catalog HY13-20-0-001/NA zm16 zm17 223 Introduction High Speed Features High Starting Torque typically 90% of running torque. Smooth Output Torque throughout the entire speed
Oildyne. Miniature Piston Pumps 5 Piston Design. Pressures to 276 bar (4000 psi) Displacements from.156cc/rev to.865cc/rev (.01 to.
Oildyne 5 Piston Design Pressures to 276 bar ( psi) Displacements from.156cc/rev to.865cc/rev (.1 to.5 in 3 /rev) 29 Features Pumping Efficiencies to 9% Allow You to Effectively Use.156 to.865 cc Flow
Safety & Shut-off Blocks
Safety & Shut-off Blocks Description HYDAC safety and shut-off blocks are designed to protect, shut-off, and discharge hydraulic accumulators or user units. The compact design simplifies the hydraulic
SECTIONAL BODY. Model SV. Directional Control Valves VALVES STANDARD FEATURES SPECIFICATIONS. Parallel or Series Circuit Construction ...
Directional Control Valves SECTIONAL BODY Model SV STANDARD FEATURES SPECIFICATIONS Parallel or Series Circuit Construction Foot Mounting Pressure Rating Maximum Operating Temp....... Weight Per Section......
High Speed Hydraulic Motors
High Speed Hydraulic Motors Catalog HY13-20-0-001/NA C C225 Introduction High Speed Features High Starting Torque typically 90% of running torque. Smooth Output Torque throughout the entire speed range
Chapter 10: Valves for Pipe Mounting
Contents Chapter : Valves for Pipe Mounting Series Description Size Body Page DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 1¼ 1½ 2 L-port T-port Pressure valves, manual operation R4V R4R Pressure relief function Pressure
2012 Series Solenoid Pilot Actuated Valves
Series Solenoid Pilot Actuated Valves www.numatics.com Table of Contents 202 Series Terminal Strip, Sub-D, and Round Connector Options-Exploded View 3 Technical and Operating Data 4 How to Order 5 Individual
Available manual, pneumatic, and hydraulic spool control kits.
Fitted with a main pressure relief valve and a load check valve on every working section. Available with parallel circuit. Optional carry-over Variety of port valves (auxiliary valves) Available manual,
DOUBLE, P.O. CHECK VALVES (PRE-ENGINEERED BLOCKS)
DOUBLE, P.O. CHECK VALVES (PRE-ENGINEERED BLOCKS) SERIES DOUBLE PILOT OPERATED CHECK VALVE... HS3 Page HD1 Page HD2 SERIES DOUBLE PILOT OPERATED CHECK VALVE GPM PSI LPM BAR CAVITY MODEL PAGE 5 3500 19
PILOT OPERATED UNLOADING VALVE - Series VR4U
PILOT OPERTED UNLODING VLVE - Series VR4U Veljan Unloadg Valves series VR4U are pilot operated controls and used to Internal Dra unload a circuit at low pressure when pilot pressure at pt is mataed higher
Pilot-Operated Directional Control Valves Series D3 - D11
Catalogue HY11-500/UK Characteristics The D31, D41, D81, D91 and D111 are electrical controlled 4/3 or 4/ way directional control valves. The valves are pilot-operated by an NG6 valve. Pressure and flow
PILOT OPERATED PRESSURE CONTROLS - FLANGED TYPE VR5 Series
PILOT OPERTED PRESSURE CONTROLS FLNGED TPE VR5 Series Veljan Flanged type, Valves Series VR5V ( Relief ), VR5U (Unloader) and VR5S (Sequence ) are pilot controls. These range of valves are suitable for
2035 Series Solenoid Pilot Actuated Valves
Solenoid Pilot Actuated Valves www.numatics.com Table of Contents...- Terminal Strip, Sub-D, and Round Connector Options... Technical and Operating Data.... How to Order-Valves and Regulators... How to
and RD5000 or by the Utility section in the Series 20 valves. 7. The internal pilot pressure is used to initiate the spool shift when a solenoid is en
December 2004 SOLENOID OPERATORS ON DIRECTIONAL CONTROL VALVES Solenoid valves us an electric signal to control the flow. BASIC TYPES 1. On Off solenoid valves. When energized, they are either fully on
GPM PSI LPM BAR MODEL CAVITY PAGE IF-S3A special IF-S3D special IG-S4A special 198
Transmission & Brake Spool Valves Screw-in style GPM PSI LPM BAR MODEL CAVITY PAGE 2 1000 8 70 TC-S3A 5/8-18 186 6 1000 23 70 TF-S3A 7/8-14 188 6 1000 23 70 TF-S3D 7/8-14 190 5 1000 20 70 TG-S4A 7/8-14
Mini 1. Compact High Flow 3-Way and 4-Way Pneumatic Directional Control Valves
Catalog LX-530 Mini 1 Compact High Flow and Pneumatic Directional Control Valves FEATURES: 3-port or 5-port bodies Manual, Air Pilot, Solenoid or Mechanical Operators Two-position, Single or Dual Actuation
3/8 & 1/2 NPT. with 3/8 and 1/2 NPT ports for 4 Way - 2 & 3 Position see Pg locate counterbores in body to control static squeeze on seals.
8 SERIES /8 Ported Air Valves 1/ Ported Air Valves /8 & 1/ 1, 1A, 1B & 8 Series Note! Spring return & spring centered models NOT suitable for dry air service. Features & Way - Position. Way - &. operator
Pilot Operated Directional Control Valves Series D1VP, D3DP, D4P, D9P, D11P
Characteristics Series D1VP, D3DP, D4P, D9P, D11P The D1VP is a hydraulically controlled 4/3 or 4/ way directional control valve. The valve can be operated either by the pilot ports X and Y via the subplate
General Valve Assembly Information
General Assembly Information Open-Center Directional Control Valves General Valve Assembly Information The Basics Every valve has the following elements: Inlet Main relief Work sections Outlet Section
ISO 5599/ Series Technical and Operating Data
ISO 5599/ Series...................................................................3-9 Technical and Operating Data......................................................................3- How to Order...................................................................................5-6
Cartridge Valves Technical Information Directional Valves DCV 03
OVERVIEW DCV 03 directional control valves consist of: housing (1), control spool (5), with two centering springs (4), and cylindrical operating solenoids (2, 3). The three-position directional valves
* Optional PRESSURE COMPENSATOR - FLANGED TYPE B A X 2.2. Typical application VR5P with flow control valve
* Veljan 3 ports pressure compensator Valve are designed for improved operation safety and reduced mountg cost. These valves are used to mata a constant pressure drop External PD, External PP Internal
MARFAID Solenoid Valves
Series 125 2-Way Normally Closed Pilot Operated Diaphragm Type Bronze Construction Wide Variety of Voltages Maximum Temperature 190 F Pressure Range 5-150 psi Horizontal or Vertical Installation 1-15 4"
2 x 3/2 Way Valves Series S10
x / Way Valves Series S0 G/ and -In Connections OD 6 mm Actuation systems: Pneumatic Electrical pilot actuated Versions: x normally closed x normally open x normally closed and x normally open With external
Spreader Valves SPR-2FFL12, SPR-2FFLC12 & SPR-2FFLW86
Spreader Valves, & SCHEMATIC MODEL PRESSURE FLOW* WEIGHT Quick Reference Page 3 Spreader Valve, Dual Flow Regulation, Compensated, Manual Dump, Gear Pump Circuit 138 bar [2000 psi] [30 US g/m] 2.62 kg
Accessories Series PSB. Specifications
Catalog HY14-252/US Technical Information General Description electrohydraulic pressure switches are high performance devices that provide an electrical signal when sensed pressure rises above or falls
Hydraulic Fluids. Note: For use with hydraulic fluids other than those listed above, please consult your Yuken representatives in advance.
Hydraulic Fluids Fluid Types Any type of hydraulic fluids listed in the table below can be used. Petroleum base oils Use fluids equivalent to ISO VG 32 or VG 46. Use phosphate ester or polyol ester fluid.
SKINNER Intrinsically Safe Series Four-Way
SKINNER Four-Way Two-Position Valves SPECIFICATIONS Mechanical Characteristics Standard Materials of Body Aluminum Seals FKM, NBR. Other diaphragm materials available upon request. Compatible Fluids Air
Directional Control Valves Accessories
Plugs Description Plug EN 175301-803 *, style AF Protection class IP 65 for voltages up to 50V Plug with LED V DC Plug with lamp insert 10V AC Plug with lamp insert 30V AC Cable connection PG 9 PG 11 PG