Solenoid valves. Poppet and Spool type solenoid actuated valves for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm)

Transcription

1 Hydraulic Screw-in Cartridge Valves (SiCV) Solenoid valves Poppet and Spool type solenoid actuated valves for applications up to 5 bar (5 psi) and 7 L/min (6 USgpm)

2 Solenoid valves SOLENOID VLVES...- SV5-8-C/CM - SOLENOID VLVE...- SV5-8-C/CM - SOLENOID VLVE...- SBV-8-C - SOLENOID BI-DIRECTIONL VLVE...-6 SBV-8-C/CM - SOLENOID BI-DIRECTIONL VLVE...-8 S7 - DIRECTIONL CONTROL VLVE...- S59 - DIRECTIONL CONTROL VLVE...- SBV-8-C/CM - SOLENOID BI-DIRECTIONL VLVE...- SV--C/CM/CR - SOLENOID VLVE...-6 SV--C/CM - SOLENOID VLVE...-8 SV-8-C/CM - SOLENOID VLVE...- SV--C/CM/CR - SOLENOID VLVE...- SV--C/CM - SOLENOID VLVE...- SBV--C - SOLENOID VLVE...-6 SBV--C - SOLENOID VLVE...-8 SV--C/CM/CR - SOLENOID VLVE...- SV--C/CM - SOLENOID VLVE...- SBV--C - SOLENOID VLVE...- SBV--C - SOLENOID VLVE...-6 SV-6-C/CM/CR - SOLENOID VLVE...-8 SV-6-C/CM - SOLENOID VLVE...-5 SV--C/CM/CR - SOLENOID VLVE...-5 SV--C/CM - SOLENOID VLVE...-5 SV-8-C/CM - SOLENOID VLVE SV-8-C/CM - SOLENOID VLVE SV--C/CM/CR - SOLENOID VLVE...-6 SV--C/CM - SOLENOID VLVE...-6 S7 - SOLENOID VLVE...-6 SV5-8-O/OP/OS - SOLENOID VLVE SV5-8-O/OP/OS - SOLENOID VLVE SBV-8-O - SOLENOID BI-DIRECTIONL VLVE...-7 SV-8-O/OP/OS - SOLENOID VLVE...-7 SV--O/OP/OS - SOLENOID VLVE...-7 SV5--O/OP/OS - SOLENOID VLVE SV5--O/OP/OS - SOLENOID VLVE SV--O/OP/OS - SOLENOID VLVE...-8 SBV--O - SOLENOID BI-DIRECTIONL VLVE...-8 SV--O/OP/OS - SOLENOID VLVE...-8 SV--O/OP/OS - SOLENOID VLVE SBV--O - SOLENOID VLVE SV-6-O/OP/OS - SOLENOID VLVE...-9 SV-6-O/OP/OS - SOLENOID VLVE...-9 SV--O/OP/OS - SOLENOID VLVE...-9 SV--O/OP/OS - SOLENOID VLVE SV-8-O/OM - SOLENOID VLVE SV-8-O/OM - SOLENOID VLVE...- SV--O/OM/OR - SOLENOID VLVE...- SV--O/OM - SOLENOID VLVE...- SV-8-/M - SOLENOID VLVE...-6 SV-8-/M - SOLENOID VLVE...-8 SV-8-/P - SOLENOID VLVE... - S9 - SOLENOID VLVE...- S5(H) - SOLENOID VLVE...- S5(H) - SOLENOID VLVE...-6 S55(H) - SOLENOID VLVE...-8 S56 - SOLENOID VLVE...- SV--/M/R - SOLENOID VLVE...- SV--/M - SOLENOID VLVE...- SV/B-- - SOLENOID VLVE...-6 SV--/P/S - SOLENOID VLVE...-8 SVM-- - SOLENOID VLVE...- SVM-- - SOLENOID VLVE...- SVM--P - SOLENOID VLVE...- SVM-- - SOLENOID VLVE Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

3 SVM--P - SOLENOID VLVE...-8 SVM-- - SOLENOID VLVE...- SV/B-- - SOLENOID VLVE...- SV-8-/M - SOLENOID VLVE...- SV-8-/M - SOLENOID VLVE...- SV-8-/M - SOLENOID VLVE...-6 SV-8-/M - SOLENOID VLVE...-8 SV--/M/R - SOLENOID VLVE...-5 S5 - SOLENOID VLVE...-5 SV--/M - SOLENOID VLVE...-5 S5 - SOLENOID VLVE SV--/M/R - SOLENOID VLVE SV--/M/R - SOLENOID VLVE...-6 SV--/M/R - SOLENOID VLVE...-6 SV5--/M/R - SOLENOID VLVE...-6 SV7--/P/S - SOLENOID VLVE SV7M--P - SOLENOID VLVE SVM-- - SOLENOID VLVE...-7 SVM-- - SOLENOID VLVE...-7 SVM-- - SOLENOID VLVE...-7 SVM-- - SOLENOID VLVE SV5M-- - SOLENOID VLVE SV5M-- - SOLENOID VLVE...-8 SV7M-- - SOLENOID VLVE...-8 SV7M-- - SOLENOID VLVE...-8 SV9-8-E - SOLENOID VLVE SV9-8-F - SOLENOID VLVE SV9-8-B - SOLENOID VLVE SV SOLENOID VLVE SV9-8 - SOLENOID VLVE...-9 SV9-- - SOLENOID VLVE...-9 SV9--B - SOLENOID VLVE...-9 SV9--E - SOLENOID VLVE...-9 SV9--F - SOLENOID VLVE SV9- - SOLENOID VLVE SV9M--E - SOLENOID VLVE SV9M--F - SOLENOID VLVE SV9M--B - SOLENOID VLVE... - SV9M-- - SOLENOID VLVE...- SV9M- - SOLENOID VLVE...- S SERIES - MNUL OVERRIDES...- MNUL OVERRIDE OPTIONS...-6 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E January 8 -

4 Solenoid valves Section contents/valve locator Functional symbol Model Flow rating Typical pressure Solenoid /, NC, poppet L/min (USgpm) bar (psi) SV5-8-C C-8- (6) () - SV5-8-C C-8-7 () 5 (5) - SV--C C-- 5 () () -6 SV--C C-- 5 () 5 (5) -8 SV--C C-- (6) 5 (5) -8 Model Flow rating Typical pressure Solenoid /, NC, bi-directional, poppet L/min (USgpm) bar (psi) SBV-8-C C-8- (.5) () -6 SBV-8-C C-8- (.5) 5 (5) -8 S7 879 (.6) () - S () () - Model Flow rating Typical pressure Solenoid /, NC, bi-directional, poppet L/min (USgpm) bar (psi) SBV-8-C C-8-6 (5) 5 (5) - SBV--C C-- 76 () () -6 SBV--C C-- 76 () 5 (5) -8 SBV--C C--/U () () - SBV--C C--/U () 5 (5) -6 Model Flow rating Typical pressure Solenoid /, NC, poppet L/min (USgpm) bar (psi) SV-8-C C-8- (6) () - SV--C C-- 5 () () - SV--C C-- 5 () 5 (5) - SV--C C-- () () - SV--C C-- () 5 (5) - SV-6-C C-6- (5) () -8 SV-6-C C-6- (5) 5 (5) -5 SV--C C-- 7 (6) () -5 SV--C C-- 7 (6) 5 (5) -5 Model Flow rating Typical pressure Solenoid /, NC, spool L/min (USgpm) bar (psi) SV-8-C C-8- () () -56 SV-8-C C-8- () 5 (5) -58 SV--C C-- (6) () -6 SV--C C-- (6) 5 (5) -6 Model Flow rating Typical pressure Solenoid /, NO, poppet L/min (USgpm) bar (psi) S7 879 (.5) 5 (5) -6 Page Page Page Page Page Page - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

5 Solenoid valves Valve locator Functional symbol Model Flow rating Typical pressure Solenoid /, NO, poppet L/min (USgpm) bar (psi) SV5-8- C-8- (6) () -66 SV5-8-O C-8-7 () 5 (5) -68 SV5--O C-- 5 () () -76 SV5--O C-- 5 () 5 (5) -78 Model Flow rating Typical pressure Solenoid /, NO, bi-directional, poppet L/min (USgpm) bar (psi) SBV-8-O C-8-6 (5) 5 (5) -7 SBV--O C-- 76 () 5 (5) -8 SBV--O C--/U () 5 (5) -88 Model Flow rating Typical pressure Solenoid /, NO, poppet L/min (USgpm) bar (psi) SV-8-O C-8- (6) () -7 SV--O C-- 5 () () -7 SV--O C-- 5 () 5 (5) -8 SV--O C--/U () () -8 SV--O C--/U () 5 (5) -86 SV-6-O C-6- (5) () -9 SV-6-O C-6- (5) 5 (5) -9 SV--O C-- 7 (6) () -9 SV--O C-- 7 (6) 5 (5) -96 Model Flow rating Typical pressure Solenoid /, NO, spool L/min (USgpm) bar (psi) SV-8-O C-8- () () -98 SV-8-O C-8- () 5 (5) - SV--O C-- (6) () - SV--O C-- (6) 5 (5) - Model Flow rating Typical pressure Solenoid /, spool L/min (USgpm) bar (psi) SV-8- C-8- () () - SV-- C-- (6) () -8 S5N C-- () () -- SV/B-- C-- () () -- SV/B-- C-- () 5 (5) - Page Page Page Page Page (ct) (T) (P) Model Flow rating Typical pressure Solenoid /, poppet L/min (USgpm) bar (psi) S9 5 () () - Model Flow rating Typical pressure Solenoid /, spool L/min (USgpm) bar (psi) S5H C-- () () - Page Page Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

6 Solenoid valves Valve locator Functional symbol (T) Model Flow rating Typical pressure Solenoid /, spool L/min (USgpm) bar (psi) S55H C-- (8) () -8 Model Flow rating Typical pressure Solenoid /, spool L/min (USgpm) bar (psi) S56N- C-- 5 (9) () - Model Flow rating Typical pressure Solenoid /, spool L/min (USgpm) bar (psi) SV-8- C-8- () () -6 SV-8- C-8- () 5 (5) -8 SV-- C-- (6) () - SV-- C-- (6) 5 (5) - Model Flow rating Typical pressure Solenoid /, spool L/min (USgpm) bar (psi) SV/B-- C-- (6) 5 (5) -6 SV/B-- C-- 8- (-) () -- SV/B-- C-- 8 () 5 (5) -- Page Page Page Page Model Flow rating Typical pressure Solenoid /, spool L/min (USgpm) bar (psi) SV/B-- C-- -8 (8-) () -- SV/B-- C-- (8) 5 (5) -- Model Flow rating Typical pressure Solenoid /, spool L/min (USgpm) bar (psi) SV-8- C-8- () () - Page Page SV-8- C-8- () 5 (5) - SV-- C-- (6) () -5 SV-- C-- (6) 5 (5) -5 S5 C-- 5 (9) () -5-6 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

7 Solenoid valves Valve locator Functional symbol Model Flow rating Typical pressure Solenoid /, spool L/min (USgpm) bar (psi) SV-8- C-8- () () -6 Page SV-8- C-8- () 5 (5) -8 SV-- C-- (6) () -58 SV/B-- C-- () () -- SV/B-- C-- () 5 (5) -- S5 C-- (8) () -56 Model Flow rating Typical pressure Solenoid /, spool L/min (USgpm) bar (psi) SV-- C-- (6) () -6 SV/B-- C-- 5 () () -- SV/B-- C-- 5 () 5 (5) -- Model Flow rating Typical pressure Solenoid /, spool L/min (USgpm) bar (psi) SV-- C-- (6) () -6 Model Flow rating Typical pressure Solenoid /, spool L/min (USgpm) bar (psi) SV5-- C-- (6) () -6 SV5/B-- C-- 6 () () -78 SV5/B-- C-- 5 () 5 (5) -8 Model Flow rating Typical pressure Solenoid /, spool L/min (USgpm) bar (psi) SV7/B-- C-- (6) 5 (5) -8 Model Flow rating Typical pressure Solenoid /, spool L/min (USgpm) bar (psi) SV7-- C-- 7 (5) () -66 SV7/B-- C-- 6 () () -8 SV7/B-- C-- 6 () 5 (5) -8 Page Page Page Page Page Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

8 Solenoid valves Valve locator Functional symbol () (B) Model Flow rating Typical pressure Page B (P) (T) Solenoid /, spool L/min (USgpm) bar (psi) SV9-8-E C-8- () () -9 SV9--E C-- 9(5) () -9 SV9--E C-- (5.8) () -98 () (B) Model Flow rating Typical pressure Page B (P) (T) Solenoid /, spool L/min (USgpm) bar (psi) SV9-8-F C-8- () () -87 SV9--F C-- (6) () -95 SV9--F C-- 5 (6.5) () -99 () (B) Model Flow rating Typical Pressure Page B (P) (T) Solenoid /, spool L/min (USgpm) bar (psi) SV9-8-B C-8-. (.5) () -88 SV9--B C-- (6) () -9 SV9--B C-- (8.9) () - () (B) Model Flow rating Typical pressure Page B (P) (T) Solenoid /, spool L/min (USgpm) bar (psi) SV9-8- C-8-. (.) () -89 SV9-- C-- 9 (5) () -9 SV9-- C-- 5 (6.5) () - -8 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

9 Solenoid valves Section overview Quality products and innovative solutions This catalog gives basic specifications for the full line of Eaton s Integrated Hydraulics screw-in cartridge solenoid valves. Its purpose is to provide a quick, convenient reference tool when choosing Eaton s Integrated Hydraulics cartridge valves or designing a system using these components. Two pressure ratings are shown for all products featured in this catalog - typical application pressure and fatigue pressure. The typical application pressure rating is the maximum recommended operating pressure for the valve in a given system. The fatigue pressure rating is the pressure for the valve to be free for infinite life from metal fatigue. Eaton s Integrated Hydraulics solenoid valves are offered with the widest choice of flow paths and position options to satisfy most requirements. These options include: -way, -position, normally open and normally closed spool and poppet valves -way, -position spool valves -way, -position spool valves -way, -position spool valves Valve features and benefits Products in this catalog have been fatigue tested for one million cycles at % or million cycles at 5% of rated pressure Rated flows up to 7 L/min (6 USgpm) Poppet and spool designs Standard cartridge cavities ll operating parts are hardened steel, ground and honed for long life and low leakage Cartridge design for maximum flexibility and minimal manifold space requirements Optional low-cost manual override is available on selected models ll exposed surfaces are zinc dichromate plated to resist corrosion ll aluminum manifolds are gold anodized to resist corrosion Reliable, economical and compact Manual override options are available on all solenoid valves except SBV series valves NNote: Solenoid valve coil details are shown in section C. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

10 Solenoid valves Coils Coil features and benefits The solenoid operated directional valves in this catalog are offered with a choice of standard voltages and several types of electrical connections. For other coil ratings and connections, consult your Eaton representative. Standard C coils are internally rectified to supply them with DC current, therefore they have no inrush current value. Coils are rated for continuous duty Coils are interchangeable for serviceability Variety of voltages and terminations Coils offer a one-piece weather-proof encapsulated design, eliminating the need for extra seals C voltage coils are internally full-wave rectified for 5 to 6 cycle (Hz) applications n arc suppression diode molded into the coil is available as a standard option on DC coils. lso available, are explosion-proof coils and cartridges that are CS approved and recognized by the US Underwriters Laboratories. Protection of internally rectified coils The rectifiers used in these coils may require protection from high voltage surges in some electrical circuits containing highly inductive or capacitive components, These include certain types of motors, solenoids, relays, and transformers. Protection is simple and inexpensive. It consists of installing a commercially available voltage surge suppressor like the General Electric MOV varistor VL for 5 volts C or the V5L for volts C, across the C line supplying the rectified components. single suppressor will normally protect all of the rectified components in the circuit, as shown in the surge suppressor circuit diagram below. Surge suppressor circuit diagram C line Voltage surge suppressor (MOV varistor) Rectified components NNote: Solenoid valve coil details are shown in section C. ll voltage surge producing components must be installed on this side of suppressor. Switches on relay contacts only. Relay coils must be connected on the line side of the surge suppressor. No inductive or capacitive loads can be installed between the surge suppressor and rectified valves without additional precautions. Caution Coils may be hot to touch if used in continuous applications. Warning Maintain in 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Overtightening may cause valve or coil failure. Warning pplication of these products beyond published performance specifications may cause valve malfunction which may result in personal injury and/or damage to the machine. - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

11 - dditional products, product lines, and services offered by Eaton - Don t Let brasion Stop You From Getting The Job Done. Get dded Protection with Weatherhead Spring Guard nd brasion Sleeve From Eaton FPO brasion Sleeve Part Numbers: 9 & 9 Series Spring Guard Part Numbers: 9 Series Spring Guard and brasion Sleeve Details Features and Benefits dditional Information Heavy duty defense against cuts For additional part and abrasion number information Sleeve can also be used to bundle please see the two or more hose assemblies for Hose Sleeves and protection and clean routing Guards portion of the ccessory section Guard helps prevent kinks and of the Weatherhead crushing of hose assemblies Hose ssembly Master Prevents accidental damage and Catalog, or contact your prolongs hose assembly life local Heavy Duty District Sales Manager today. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 -

12 SV5-8-C/CM - Solenoid valve Poppet type, normally closed solenoid valve L/min (6 USgpm) bar ( psi) Operation In the de-energized position the valve blocks flow from port to and free flow is allowed from port to. When the solenoid is energized the pilot poppet is pulled off the seat allowing the valve to open from port to. in the reverse direction the flow is restricted by the pilot orifice. Features Hardened and ground working parts. Lapped seat for low leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low pressure drop. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) Cartridge fatigue pressure (infinite life) Rated flow Internal leakage Coil duty Response times (% rated voltage and flow) Temperature range Fluids bar ( psi) bar ( psi) L/min (6 USgpm) less than 5 bar ( psi) Continuous from 85% to % of nominal voltage Energize: 8 ms De-Energize: 6 ms - to C (- to 8 F) C-8- ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) luminum Weight including coil,8 kg (.6 lbs) Seal kit (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way, -position, poppet type, pilot operated, normally closed solenoid valve. This valve is used in applications requiring low leakage, such as load holding applications or as a general purpose diverter or dump valve. Pressure drop Pressure Drop - psi 5 5 Flow - L/min (,8 cst 9 C) 8 6 B 8 Pressure Drop - bar 5 6 Flow - USgpm (5 SUS F) - Port to port de-energized B - Port to port energized - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

13 SV5-8-C/CM - Solenoid valve Poppet type, normally closed solenoid valve L/min (6 USgpm) bar ( psi) Model code SV5 8 (V) C (M) (F) () ** **** * S Function SV5 - Solenoid valve Size 8-8 size Seal material Blank - Buna-N V - Viton Style C - Normally closed 5 Manual override option Blank - No manual override M - Knob type For valve dimensions with manual override option installed see page Filter option Blank - None F - Filter screen 8 Port size 7 Valve housing material Omit for cartridge only - luminum Code Port size Housing number G / BSPP -677 G /8 BSPP -678 T SE -67 6T SE T SE 8-67 See section J for housing details. 9 Voltage rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. Connector types G - ISO DIN 65 Q - Spade terminals W - Flying lead N - Deutsch Y - mp JR D - Metripack 5 male J - Metripack 8 male Coil series S - 8 series, W For coil part numbers and dimensions see section C. Special features - None (Only required if valve has special features, omitted if.) Dimensions mm (inch) Torque cartridge in aluminum housing - Nm (5- ft lbs) 6, (.) NNote: When solenoid valve is ordered as cartridge only, coil nut is included. Installation drawing 5.8 (.) 5.8 (.) Ø,7 (.5) 9, (.75) hex 8. (.5) 5.8 (.) 5.5 (.6) X 7. (.8) 9. (.75). (.). (.7) 5.8 (.) 7,6 (.8) Ø,6 (.5).75-6 Thd. Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 -

14 SV5-8-C/CM - Solenoid valve Poppet type, normally closed solenoid valve 7 L/min ( USgpm) 5 bar (5 psi) Operation In the de-energized position the valve blocks flow from port to and free flow is allowed from port to. When the solenoid is energized the pilot poppet is pulled off the seat allowing the valve to open from port to. in the reverse direction the flow is restricted by the pilot orifice. Features Hardened and ground working parts. Lapped seat for low leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low pressure drop. 5 bar working pressure. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) Cartridge fatigue pressure (infinite life) Rated flow Internal leakage, port to port Temperature range Coil duty Fluids 5 bar (5 psi) bar (5 psi) 7 L/min ( USgpm) 5 drops/min, bar ( psi) - to C (- to F) Continuous from 85% to % of nominal voltage C-8- ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) Steel Weight cartridge only, kg (.5 lbs) Seal kit (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way, -position, poppet type, high pressure, pilot operated, normally closed solenoid valve. This valve is used in applications requiring low leakage, such as load holding applications or as a general purpose diverter or dump valve. Pressure drop Pressure Drop - psi Flow - L/min (,8 cst 9º C) B 6 8 Pressure Drop - bar 6 8 Flow - USgpm (5 SUS F) - Port to port B - Port to port - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

15 SV5-8-C/CM - Solenoid valves Poppet type, normally closed solenoid valve 7 L/min ( USgpm) 5 bar (5 psi) Model code SV5 8 (V) C (M) (S) ** **** * P Function SV5 - Solenoid valve Size 8-8 size Seal material Blank - Buna-N V - Viton 7 Port size Code Port size Housing number G / BSPP -67 G /8 BSPP -67 T SE T SE T SE See section J for housing details. 9 Connector types G - ISO DIN 65 Q - Spade terminals W - Flying lead N - Deutsch Y - mp JR D - Metripack 5 male J - Metripack 8 male Style C - Normally closed 5 Manual override option Blank - No manual override M - Manual override For valve dimensions with manual override option installed see page Voltage rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. Coil series P - 8 series, W For coil part numbers and dimensions see section C. Special features - None (Only required if valve has special features omitted if. ) 6 Valve housing material Blank - S - Steel Dimensions mm (inch) Torque cartridge in aluminum or steel housing - Nm (5- ft lbs) NNote: When solenoid valve is ordered as cartridge only, coil nut is included. Installation drawing 6, (.) 5.8 (.) 5.8 (.) Ø,7 (.5) 9, (.75) hex 8. (.5) 5.8 (.) 5.5 (.6) X 7. (.8) 9. (.75). (.). (.7) 5.8 (.) 7,6 (.8) Ø,6 (.5).75-6 Thd. Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

16 SBV-8-C - Solenoid Bi-directional valve Bi-directional, normally closed solenoid valve (low flow version) L/min (.5 USgpm) bar ( psi) Operation In the de-energized position the valve is blocked in both directions. When the solenoid is energized the poppet is released from the seat allowing flow in both directions. Features Hardened and ground working parts. IP69K Tough coil compatibility. Continuously rated. Compact design with low pressure drop. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) Cartridge fatigue pressure (infinite life) Rated flow Internal leakage, port to port and port to port Temperature range Coil duty Fluids bar ( psi) bar ( psi) L/min (.5 USgpm) 5 drops/min, 5 bar (5 psi) - to C (- to F) Continuous from 85% to % of nominal voltage C-8- ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) luminum or steel Weight cartridge only, kg (.6 lbs) Seal kit (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way -position, low flow, high pressure bidirectional, normally closed poppet type screw in cartridge valve. The valve is ideal for isolating and holding actuators in position or blocking pilot lines. Pressure drop Pressure Drop - psi 6 5 Flow - L/min (,8 cst 9 C) Pressure Drop - bar Flow - USgpm (5 SUS F) -6 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

17 SBV-8-C - Solenoid Bi-directional valve Bi-directional, normally closed solenoid valve (low flow version) L/min (.5 USgpm) bar ( psi) Model code SBV 8 (*) C (*) ** **** * P Function SBV - Solenoid valve Size 8-8 size Seal material Blank - Buna-N V - Viton 6 Port size Code Port size Housing number luminium Steel G / BSPP G /8 BSPP T SE T SE T SE See section J for housing details. 8 Connector types G - ISO DIN 65 Q - Spade terminals W - Flying lead N - Deutsch Y - mp JR D - Metripack 5 male J - Metripack 8 male Style C - Normally closed 5 Valve housing material Blank - - luminum S - Steel 7 Voltage rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 9 Coil series P - 8 series, W For coil part numbers and dimensions see section C. Special features - None (Only required if valve has special features omitted if.) Dimensions mm (inch) Torque cartridge in aluminum or steel housing - Nm (5- ft lbs). NNote: When solenoid valve is ordered as cartridge only, coil nut is included. Installation drawing (luminum) 6, (.) 5.8 (.) Ø,7 (.5) 9, (.75) hex 5.8 (.) 8. (.5) 5.5 (.6) X 7. (.8) 9. (.75) 5.8 (.). (.). (.7) 5.8 (.) 7,7 (.9), (.87) hex Ø,6 (.97).75-6 Thd. Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Warning luminum housings can be used for pressures up to bar ( psi). Steel housings must be used for operating pressures above bar ( psi). Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

18 SBV-8-C/CM - Solenoid Bi-directional valve Bi-directional, normally closed solenoid valve (low flow version) L/min (.5 USgpm) 5 bar (5 psi) Operation In the de-energized position the valve is blocked in both directions. When the solenoid is energized the poppet is released from the seat allowing flow in both directions. Features Hardened and ground working parts. IP69K Tough coil compatibility. Continuously rated. Compact design with low pressure drop. 5bar working pressure. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) Cartridge fatigue pressure (infinite life) Rated flow Internal leakage, port to port and port to port Temperature range Coil duty Fluids 5 bar (5 psi) bar (5 psi) L/min (.5 USgpm) 5 drops/min, 5 bar (5 psi) - to C (- to F) Continuous from 85% to % of nominal voltage C-8- ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) luminum or steel Weight cartridge only, kg (.6 lbs) Seal kit (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way -position, low flow, high pressure bidirectional, normally closed poppet type screw in cartridge valve. The valve is ideal for isolating and holding actuators in position or blocking pilot lines. Pressure drop 6 Flow - L/min (,8 cst 9 C) Pressure Drop - psi 5 Pressure Drop - bar Flow - USgpm (5 SUS F) -8 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

19 SBV-8-C/CM - Solenoid Bi-directional valve Bi-directional, normally closed solenoid valve (low flow version) L/min (.5 USgpm) 5 bar (5 psi) Model code SBV 8 (V) C (*) (*) ** **** * P Function SBV - Solenoid valve Size 8-8 size Seal material Blank - Buna-N V - Viton 7 Port size Code Port size Housing number luminium Steel G / BSPP G /8 BSPP T SE T SE T SE See section J for housing details. 9 Connector types G - ISO DIN 65 Q - Spade terminals W - Flying lead N - Deutsch Y - mp JR D - Metripack 5 male J - Metripack 8 male Style C - Normally closed 5 Manual override option Blank - No manual override M - Manual override For valve dimensions with manual override option installed see page Voltage rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. Coil series P - 8 series, W For coil part numbers and dimensions see section C. Special features - None (Only required if valve has special features omitted if. ) 6 Valve housing material Blank - - luminum S - Steel Dimensions mm (inch) 6, (.) Torque cartridge in aluminum or steel housing - Nm (5- ft lbs). Installation drawing (Steel) NNote: When solenoid valve is ordered as cartridge only, coil nut is included. 5.8 (.) 5.8 (.) Ø,7 (.5) 9, (.75) hex 8. (.5) 5.8 (.) 5.5 (.6) X 7. (.8) 9. (.75). (.). (.7) 5.8 (.) 7,7 (.9), (.87) hex Ø,6 (.97) Warning Warning luminum housings can be Maintain 5-8 Nm (-6 ft lbs) used for pressures up to.75 maximum torque on valve bar ( psi). Steel housings - 6 Thd. tube nut. must be used for operating Over tightening may cause pressures above bar valve failure. ( psi). Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

20 S7 - Directional control valve Bi-directional, normally closed poppet solenoid valve Up to L/min (.6 USgpm) Up to bar ( psi) Sectional view Operation In the de-energized position the valve is blocked in both directions. When the solenoid is energized the poppet is pushed off the seat allowing flow in both directions. Features Very low leakage poppet design. Standard valve bodies and common cavities. One-piece encapsulated coil with minimal amperage draw. Oil immersed armature solenoid. Various coil terminals and voltages. Coil interchangeability with valves of same series. Manual override, seal variations and other options available. Sealed coil arrangement to protect stem from corrosion. Performance data Description This is a direct acting, electrically operated way position normally closed poppet style screw in cartridge valve. Ideal for load holding and load lowering applications. Ratings and specifications Performance data is typical with fluid at Viscosity cst (5 SSU) Typical application pressure bar ( psi) Rated flow Up to L/min (.6 USgpm) Nominal flow L/min (.6 USgpm) Internal leakage Less than.6 ml/min ( dpm) bar differential at cst Temperature range - to + C (- to +8 F) 879 (see Section M) Electrical data See coil data sheet Torque cartridge into cavity Nm (5 lbs ft) Mounting position Unrestricted Fluids ll general purpose hydraulics fluids such as: MIL-H-566, SE, SE etc Seal material Standard nitrile with PTFE back up rings Filtration BS55/ Class 8/ (5 micron or better) Nominal viscosity range 5 to 5 cst Standard housing materials luminium alloy Coil weight. kg (. lbs) Cartridge weight. kg (. lbs) Seal kit SK (Nitrile) SKV (Viton) Coil part number C-*-*/7 Coil voltage available, VDC.,, VC* Viton is a registered trademark of E.I. DuPont *C coils must be used with a rectifying connector Pressure drop Pressure - psi Flow - L/min Flow - US gpm Pressure - bar Pressure - psi Flow - L/min Flow - US gpm Pressure - bar - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

21 S7 - Directional control valve Bi-directional, normally closed poppet solenoid valve Up to L/min (.6 USgpm) Up to bar ( psi) Model code S7 N * H W 5 6 Function S7 - Normally open Seal material N - Nitrile V - Viton Manual Override - Screw - Push (Consult factory for availability) See page -98. Voltage - VDC - VDC - VC - VC 5 Coil Termination H - ISO DIN 65 F - Flying lead DM - Deutsch moulded Other terminations available on request. 6 Port sizes Code Port size Housing number luminium Steel W / BSP 85 W /8 BSP 75 6T /8 SE Dimensions mm (inch) Basic code S7 Installation drawing.5 (.9) 8. (.89) 6. (.) 5. (.97) holes Ø6.8 (.7) thro 59. (.) 7. (.7). /F / -6- UNF- 8.5 (.5) 8.5 (.) 6. (.6) 9. (.75) 6. (.) 6. (.). (.87).8 (.5) 5.9 (.6) 5.8 (.).8 (.5) Ø.6 (.5) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 -

22 S59 - Directional control valve Bi-directional, normally closed poppet solenoid valve Up to L/min ( USgpm) Up to bar ( psi) Sectional view Operation In the de-energized position the valve is blocked in both directions. When the solenoid is energized the poppet is pushed off the seat allowing flow in both directions. Features Very low leakage poppet design. Standard valve bodies and common cavities. One-piece encapsulated coil with minimal amperage draw. Oil immersed armature solenoid. Various coil terminals and voltages. Coil interchangeability with valves of same series. Manual override, seal variations and other options available. Sealed coil arrangement to protect stem from corrosion. Performance data Description This is a direct acting, electrically operated way position normally closed poppet style screw in cartridge valve. Ideal for load holding and load lowering applications. Ratings and specifications Performance data is typical with fluid at Viscosity cst (5 SSU) Typical application pressure bar ( psi) Rated flow Up to L/Min Nominal flow L/min ( USgpm) Internal leakage Less than.6 ml/min ( dpm) bar differential at cst Temperature range - to + C (- to +8 F) XP7 (see Section M) Electrical data See coil data sheet Torque cartridge into cavity Nm (5 lbs ft) Mounting position Unrestricted Fluids ll general purpose hydraulics fluids such as: MIL-H-566, SE, SE etc Seal material Standard nitrile with PTFE back up rings Filtration BS55/ Class 8/ (5 micron or better) Nominal viscosity range 5 to 5 cst Standard housing materials luminum, Steel Coil weight. kg (. lbs) Cartridge weight. kg (. lbs) Seal kit SK8 (Nitrile) SK8V (Viton) Coil part number C6*-*/9 Coil voltage available, VDC.,, VC* Viton is a registered trademark of E.I. DuPont *C coils must be used with a rectifying connector Pressure drop Pressure - psi Flow - L/min Flow - US gpm Pressure - bar Pressure - psi Flow - L/min Flow - US gpm Pressure - bar - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

23 S59 - Directional control valve Bi-directional, normally closed poppet solenoid valve Up to L/min ( USgpm) Up to bar ( psi) Model code S59 N H W 5 6 Function S59 - Normally closed Seal material N - Nitrile V - Viton Manual override Bank - No Manual Override - Push (Consult factory for availability) See page -98. Voltage - VDC - VDC - VC - VC 5 Coil termination H - ISO DIN 65 F - Flying lead - Junior MP DM - Deutsch moulded Other terminations available on request. 6 Port sizes Code Port size Housing number luminium Steel W 8 BSP BXP95 BXP598 W BSP BXP956 BXP599 6T /8 SE BXP9 BXP6 8T SE BXP9 BXP6 Dimensions mm (inch) Basic code S7 Installation drawing /F /8"- -UNF Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 -

24 SBV-8-C/CM - Solenoid Bi-directional valve Bi-directional, normally closed solenoid valve 6 L/min (5 USgpm) 5 bar (5 psi) Operation In the de-energized position the valve is blocked in both directions. When the solenoid is energized the pilot poppet is released from the seat allowing the main poppet to open. series of internal check valves allows full flow in both directions. Features Hardened and ground working parts. Lapped seat for low leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low pressure drop. 5 bar working pressure. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) 5 bar (5 psi) Cartridge fatigue pressure (infinite life) bar (5 psi) Rated flow 6 L/min (5 USgpm) Internal leakage, port to port & port to port 5 drops/min, 5 bar (5 psi) Temperature range - to C (- to F) Coil duty Continuous from 85% to % of nominal voltage C-8- ll general purpose hydraulic fluids such as: Fluids MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) luminum or steel Weight cartridge only, kg (.6 lbs) Seal kit (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way -position, high pressure bi-directional, pilot operated, normally closed poppet type screw in cartridge valve. The valve is ideal for isolating and holding actuators in position. Pressure drop Flow - L/min (,8 cst 9 C) Pressure Drop - psi B 6 8 Pressure Drop - bar Flow - USgpm (5 SUS F) - Port to port B - Port to port - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

25 SBV-8-C/CM - Solenoid Bi-directional valve Bi-directional, normally closed solenoid valve 6 L/min (5 USgpm) 5 bar (5 psi) Model code SBV 8 (V) C (*) (*) ** **** * P Function SBV - Solenoid valve Size 8-8 size Seal material Blank - Buna-N V - Viton 7 Port size Code Port size Housing number luminium Steel G / BSPP G /8 BSPP T SE T SE T SE See section J for housing details. 9 Connector types G - ISO DIN 65 Q - Spade terminals W - Flying lead N - Deutsch Y - mp JR D - Metripack 5 male J - Metripack 8 male Style C - Normally closed 5 Manual override option Blank - No manual override M - Manual override For valve dimensions with manual override option installed see page Valve housing material Blank - - luminum S - Steel 8 Voltage rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. Coil series P - 8 series, W For coil part numbers and dimensions see section C. Special features - None (Only required if valve has special features omitted if. ) Dimensions mm (inch) Torque cartridge in aluminum or steel housing - Nm (5- ft lbs) NNote: When solenoid valve is ordered as cartridge only, coil nut is included. 6, (.) Installation drawing (Steel) 5.8 (.) 5.8 (.) Ø,7 (.5) 9, (.75) hex 8. (.5) 5.8 (.). (.). (.7) 5.8 (.) 5.5 (.6) X 7. (.8) 9. (.75) 7,7 (.9) Ø,6 (.5).75-6 Thd. Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Warning luminum housings can be used for pressures up to bar ( psi). Steel housings must be used for operating pressures above bar ( psi). Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

26 SV--C/CM/CR - Solenoid valve Poppet type, normally closed solenoid valve 5 L/min ( USgpm) bar ( psi) Operation In the de-energized position the valve blocks flow from port to and free flow is allowed from port to. When the solenoid is energized the pilot poppet is pulled off the seat allowing the valve to open from port to. in the reverse direction the flow is restricted by the pilot orifice. Features Hardened and ground working parts. Lapped seat for low leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low pressure drop. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) Cartridge fatigue pressure (infinite life) Rated flow Internal leakage Coil duty Response times (% rated voltage and flow) Temperature range Fluids bar ( psi) bar ( psi) 5 L/min ( USgpm) Less than 5 drops/min. bar ( psi) Continuous from 85% to % of nominal voltage Energize: 8 ms, de-energize: 6 ms - to C (- to 8 F) C-- ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) luminum Weight including coil, kg (.87 lbs) Seal kit 5658 (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way, -position, poppet type, pilot operated, normally closed solenoid valve. This valve is used in applications requiring low leakage, such as load holding applications or as a general purpose diverter or dump valve. Pressure drop Pressure Drop - psi Flow - L/min (,8 cst 9 C) B 7 5 Pressure Drop - bar 6 8 Flow - USgpm (5 SUS F) Pressure drop vs. Flow - Port to port de-energized B - Port to port energized -6 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

27 SV--C/CM/CR - Solenoid valve Poppet type, normally closed solenoid valve 5 L/min ( USgpm) bar ( psi) Model code SV (V) C (*) (F) ** **** * Function SV - Solenoid valve Size - size Seal material Blank - Buna-N V - Viton Style C - Normally closed 5 Manual override option Blank - No manual override M - Knob type R - Cable type For valve dimensions with manual override option installed see page Port size 9 Connector types Code Port size Housing number G - ISO DIN 65 Q - Spade terminals B /8 BSPP -756* W - Flying lead 6T SE * N - Deutsch G / BSPP 8767 Y - mp JR G /8 BSPP 8767 D - Metripack 5 male 6H SE H SE J - Metripack 8 male *Light duty housing. See section J for housing details. 8 Voltage rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. For coil part numbers and dimensions see section C. Special features - None (Only required if valve has special features, omitted if.) NNote: Use J series, W coils with this solenoid valve. 6 Filter option Blank - None F - Filter screen 9,6 (.6) Dimensions mm (inch) Torque cartridge in aluminum housing 7-5 Nm (5- ft lbs) NNote: When solenoid valve is ordered as cartridge only, coil nut is included. Ø 8,9 (.5) 9, (.75) h ex 57, (.5),7 (.5) 5, (.) h ex Thd. Ø 5,8 (.6) Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

28 SV--C/CM - Solenoid valve Poppet type, normally closed solenoid valve 5 L/min ( USgpm) 5 bar (5 psi) Operation In the de-energized position the valve blocks flow from port to and free flow is allowed from port to. When the solenoid is energized the pilot poppet is pulled off the seat allowing the valve to open from port to. in the reverse direction the flow is restricted by the pilot orifice. Features Hardened and ground working parts. Lapped seat for low leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low pressure drop. 5 bar working pressure. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) Cartridge fatigue pressure (infinite life) Rated flow Internal leakage, port to port Temperature range Coil duty Fluids 5 bar (5 psi) bar (5 psi) 5 L/min ( USgpm) 5 drops/min, 5 bar (5 psi) - to C (- to F) Continuous from 85% to % of nominal voltage C-- ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) Steel Weight cartridge only,8 kg (.9 lbs) Seal kit 5658 (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way, -position, poppet type, high pressure, pilot operated, normally closed solenoid valve. This valve is used in applications requiring low leakage, such as load holding applications or as a general purpose diverter or dump valve. Pressure drop Pressure Drop - psi Flow - L/min (,8 cst 9 C) Port to Port to Flow - USgpm (95 SSU F) Pressure Drop - bar - Port to port de-energized B - Port to port energized -8 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

29 Model code SV--C/CM - Solenoid valve Poppet type, normally closed solenoid valve 5 L/min ( USgpm) 5 bar (5 psi) SV (V) C (M) (S) ** **** * H Function SV - Solenoid valve Size - size Seal material Blank - Buna-N V - Viton Style C - Normally closed 5 Manual override option Blank - No manual override M - Manual override For valve dimensions with manual override option installed see page Valve housing material Blank - S - Steel 7 Port size Code Port size Housing number G / BSPP -75 G /8 BSPP -75 6T SE T SE 8-75 See section J for housing details. 8 Voltage rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 9 Connector types G - ISO DIN 65 Q - Spade terminals W - Flying lead N - Deutsch Y - mp JR D - Metripack 5 male J - Metripack 8 male Coil series H - series, 9 W For coil part numbers and dimensions see section C. Special features - None (Only required if valve has special features omitted if.) Dimensions mm (inch) Torque cartridge in steel housing Nm (5-55 ft. lbs) 9,6 (.6) NNote: When solenoid valve is ordered as cartridge only, coil nut is included. Installation drawings (Steel) Ø 8,9 (.5), (.875) hex 57. (.5) 57,8 (.8),7 (.5) 5, (.) hex Ø 5,8 (.6).875" Thd (.) (.5) 9.5 (.7) 6.5 (.5) 9. (.75). (.87).5±. (.75±.5) Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. xø7.±. (.8±.5).5±.5 (.75±.) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

30 SV-8-C/CM - Solenoid valve Poppet type, normally closed solenoid valve L/min (6 USgpm) bar ( psi) Operation In the de-energized position the valve blocks flow from port to and free flow is allowed from port to. When the solenoid is energized the pilot poppet is pulled off the seat allowing the valve to open in both directions. Features Hardened and ground working parts. Lapped seat for low leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low pressure drop. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) Cartridge fatigue pressure (infinite life) Rated flow Internal leakage Coil duty Response times (% rated voltage and flow) Temperature range Fluids bar ( psi) bar ( psi) L/min (6 USgpm) less than 5 bar ( psi) Continuous from 85% to % of nominal voltage Energize: 8 ms De-Energize: 6 ms - to C (- to 8 F) C-8- ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) luminum Weight including coil,8 kg (.6 lbs) Seal kit (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way, -position, poppet type, pilot operated, normally closed solenoid valve. This valve is used in applications requiring low leakage, such as load holding applications or as a general purpose diverter or dump valve. Pressure drop Pressure Drop - psi 5 5 Flow - L/min (,8 cst 9 C) 8 6 B 8 Pressure Drop - bar 5 6 Flow - USgpm (5 SUS F) - Port to port de-energized B - Port to port energized - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

31 SV-8-C/CM - Solenoid valve Poppet type, normally closed solenoid valve L/min (6 USgpm) bar ( psi) Model code SV 8 (V) C (M) (F) () ** **** * S Function SV - Solenoid valve Size 8-8 size Seal material Blank - Buna-N V - Viton Style C - Normally closed 5 Manual override option Blank - No manual override M - Knob type For valve dimensions with manual override option installed see page Filter option Blank - None F - Filter screen 8 Port size Code Port size Housing number G / BSPP -677 G /8 BSPP -678 T SE -67 6T SE T SE 8-67 See section J for housing details. 9 Voltage rating - No coil D - VDC D - VDC 6D - 6VDC 7 Valve housing material Omit for cartridge only - luminum - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. Connector types G - ISO DIN 65 Q - Spade terminals W - Flying lead N - Deutsch Y - mp JR D - Metripack 5 male J - Metripack 8 male Coil series S - 8 series, W For coil part numbers and dimensions see section C. Special features - None (Only required if valve has special features, omitted if.) Dimensions mm (inch) Torque cartridge in aluminum housing - Nm (5- ft lbs) NNote: When solenoid valve is ordered as cartridge only, coil nut is included. 6, (.) Installation Drawing (.) (.) Ø,7 (.5) , (.) (.) 9, (.75) hex 8. (.5) 5.8 (.) 5.5 (.6) X 7. (.8) 9. (.75) 7,6 (.8) Ø,6 (.5).75-6 Thd.. (.). (.7) 5.8 (.) Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 -

32 SV--C/CM/CR - Solenoid valve -way, -position, normally closed, poppet type solenoid valve 5 L/min ( USgpm) bar ( psi) Operation In the de-energized position the valve blocks flow from port to and free flow is allowed from port to. When the solenoid is energized the pilot poppet is pulled off the seat allowing the valve to open in both directions. Features Hardened and ground working parts. Lapped seat for low leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low pressure drop. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) Cartridge fatigue pressure (infinite life) Rated flow Internal leakage Temperature range Coil duty Fluids bar ( psi) bar ( psi) 5 L/min ( USgpm) less than 5 drops/min, bar ( psi) - to C (- to 8 F) Continuous from 85% to % of nominal voltage C-- ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) luminum Weight cartridge only, kg (.87 lbs) Seal kit 5658 (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way, -position, poppet type, pilot operated, normally closed solenoid valve. This valve is used in applications requiring low leakage, such as load holding applications or as a general purpose diverter or dump valve. Pressure drop curves Pressure Drop - psi Flow - L/min (,8 cst 9 C) 6 8 B Flow - USgpm (5 SUS F) 5 Pressure Drop - bar - Port to port de-energized B - Port to port energized - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

33 Model code SV--C/CM/CR - Solenoid valve -way, -position, normally closed, poppet type solenoid valve 5 L/min ( USgpm) bar ( psi) SV (V) C (*) (F) ** **** * Function SV - Solenoid valve Size - size Seal material Blank - Buna-N V - Viton Style C - Normally closed 5 Manual override option Blank - No manual override M - Knob type R - Cable type For valve dimensions with manual override option installed see page Port size Code Port size Housing number B /8 BSPP -756* G / BSPP 8767 G /8 BSPP T SE * 6H SE H SE See section J for housing details. *Light duty housing 8 Voltage rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 9 Connector types G - ISO DIN 65 Q - Spade terminals W - Flying lead N - Deutsch Y - mp JR D - Metripack 5 male J - Metripack 8 male For coil part numbers and dimensions see section C. Special features - None (Only required if valve has special features, omitted if. ) 6 Filter options Blank - None F - Filter screen Dimensions mm (inch) 9,6 (.6) Torque cartridge in aluminum housing 7-5 Nm (5- ft lbs) NNote: When solenoid valve is ordered as cartridge only, coil nut is included. Ø 8,9 (.5) 9, (.75) hex Installation drawing 57. (.5) NNote: Use J series, W coils with this solenoid valve. 57, (.5),7 (.5) 5, (. ) hex.875" Thd. Ø 5,8 (.6) 6.5 (.5) 9.5 (.7).5 (.75) 6.5 (.5).6 (.75) 9. (.75) X 7. (.8) 5. (.) Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 -

34 SV--C/CM - Solenoid valve Poppet type, normally closed solenoid valve, (free reverse flow) 5 L/min ( USgpm) 5 bar (5 psi) Operation In the de-energized position the valve blocks flow from port to and free flow is allowed from port to. When the solenoid is energized the pilot poppet is pulled off the seat allowing the valve to open in both directions. Features Hardened and ground working parts. Lapped seat for low leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low pressure drop. 5 bar working pressure. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) 5 bar (5 psi) Cartridge fatigue pressure (infinite life) bar (5 psi) Rated flow 5 L/min ( USgpm) Internal leakage, port to port 5 drops/min, 5 bar (5 psi) Temperature range - to C (- to F) Coil duty Continuous from 85% to % of nominal voltage C-- Fluids ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc Filtration Cleanliness code 8/6/ Housing material (standard) Steel Weight cartridge only,8 kg (.9 lbs) Seal kit 5658 (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way, -position, poppet type, high pressure, pilot operated, normally closed solenoid valve. This valve is used in applications requiring low leakage, such as load holding applications or as a general purpose diverter or dump valve. Pressure drop Pressure Drop - psi Flow - L/min (,8 cst 9 C) B Pressure Drop - bar Flow - USgpm (5 SUS F) - Port to port B - Port to port energized - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

35 Model code SV--C/CM - Solenoid valve Poppet type, normally closed solenoid valve, (free reverse flow) 5 L/min ( USgpm) 5 bar (5 psi) SV (V) C (M) (S) ** **** * H Function SV - Solenoid valve Size - size Seal material Blank - Buna-N V - Viton Style C - Normally closed 5 Manual override option Blank - No manual override M - Manual override For valve dimensions with manual override option installed see page Valve housing material Blank - S - Steel 7 Port size 9 Connector types Code Port size Housing number G - ISO DIN 65 Q - Spade terminals G / BSPP -75 W - Flying lead G /8 BSPP -75 N - Deutsch 6T SE 6-75 Y - mp JR 8T SE 8-75 D - Metripack 5 male See section J for housing details. J - Metripack 8 male 8 Voltage rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. Coil series H - Series, 9 W For coil part numbers and dimensions see section C. Special features - None (Only required if valve has special features, omitted if.) Dimensions mm (inch) Torque cartridge in steel housing Nm (5-55 ft lbs) 9,6 (.6) NNote: When solenoid valve is ordered as cartridge only, coil nut is included. Ø 8,9 (.5), (.875) hex 57,8 (.8) 5, (.) hex Ø 5,8 (.6).875" Thd.,7 (.5) Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

36 SBV--C - Solenoid valve -way, -position, normally closed, bi-directional, poppet type solenoid valve 76 L/min ( USgpm) bar ( psi) Operation In the de-energized position the valve is blocked in both directions. When the solenoid is energized the pilot poppet is released from the seat allowing the main poppet to open. series of internal check valves allows full flow in both directions. Features Hardened and ground working parts. Lapped seat for low leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low pressure drop. bar working pressure. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) Cartridge fatigue pressure (infinite life) Rated flow Internal leakage Temperature range Coil duty Fluids bar ( psi) bar ( psi) 76 L/min ( USgpm) 5 drops/min, bar ( psi) - to C (- to F) Continuous from 85% to % of nominal voltage C-- ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) luminum or steel Weight cartridge only,8 kg (.9 lbs) Seal kit (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way -position, high pressure bi-directional, pilot operated, normally closed poppet type screw in cartridge valve. The valve is ideal for isolating and holding actuators in position. Pressure drop Pressure Drop - psi Flow - L/min (,8 cst 9 C) B 9 6 Pressure Drop - bar 8 6 Flow - USgpm (5 SUS F) - Port to port B - Port to port -6 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

37 Model code SBV--C - Solenoid valve -way, -position, normally closed, bi-directional, poppet type solenoid valve 76 L/min ( USgpm) bar ( psi) SBV (V) C (*) ** **** * J Function SBV - Solenoid bi-directional valve Size - size Seal material Blank - Buna-N V - Viton Style C - Normally closed 5 Valve housing material Blank - - luminum S - Steel 6 Port size 8 Connector types Code Port size Housing number G - ISO DIN 65 luminium Steel Q - Spade terminals W - Leadwire G / BSPP N - Deutsch G /8 BSPP Y - mp JR B /8 BSPP -756 D - Metripack 5 male 6H SE T SE J - Metripack 8 male 8H SE T SE 8-75 See section J for housing details. 7 Voltage rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 9 Coil series J - series, W For coil part numbers and dimensions see section C. Special features - None (Only required if valve has special features, omitted if. ) Dimensions mm (inch) Torque cartridge in housing Nm (5- ft lbs) S Nm (5-55 ft lbs) 9,6 (.6) NNote: For applications above bar please consult our technical department or use the steel body option. Installation drawing (luminum) 57.8 (.8) Ø 8,9 (.5), (.87) hex 5.8 (.) 9. (.75). (.87) 6.5 (.5) 57,8 (.8) 9.5 (.7).6 (.75) X 7. (.8) 6.5 (.5),7 (.5) 5, (.) hex.875" Thd. Ø 5,8 (.6) Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Warning luminum housings can be used for pressures up to bar ( psi). Steel housings must be used for operating pressures above bar ( psi). Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

38 SBV--C - Solenoid valve -way, -position, normally closed, bi-directional, poppet type solenoid valve 76 L/min ( USgpm) 5 bar (5 psi) Operation In the de-energized position the valve is blocked in both directions. When the solenoid is energized the pilot poppet is released from the seat allowing the main poppet to open. series of internal check valves allows full flow in both directions. Features Hardened and ground working parts. Lapped seat for low leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low pressure drop. 5 bar working pressure. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) Cartridge fatigue pressure (infinite life) Rated flow Internal leakage Temperature range Coil duty Fluids 5 bar (5 psi) bar (5 psi) 76 L/min ( USgpm) 5 drops/min, 5 bar (5 psi) - to C (- to F) Continuous from 85% to % of nominal voltage C-- ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) luminum or steel Weight cartridge only,8 kg (.9 lbs) Seal kit (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way -position, high pressure bi-directional, pilot operated, normally closed poppet type screw in cartridge valve. The valve is ideal for isolating and holding actuators in position. Pressure drop Pressure Drop - psi Flow - L/min (,8 cst 9 C) B 9 6 Pressure Drop - bar 8 6 Flow - USgpm (5 SUS F) - Port to port B - Port to port -8 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

39 Model code SBV--C - Solenoid valve -way, -position, normally closed, bi-directional, poppet type solenoid valve 76 L/min ( USgpm) 5 bar (5 psi) SBV (V) C (*) ** **** * H Function SBV - Solenoid bi-directional valve Size - size Seal material Blank - Buna-N V - Viton Style C - Normally closed 5 Valve housing material Blank - - luminum S - Steel 6 Port size 8 Connector types Code Port size Housing number G - ISO DIN 65 luminium Steel Q - Spade terminals W - Flying lead G / BSPP N - Deutsch G /8 BSPP Y - mp JR B /8 BSPP -756 D - Metripack 5 male 6H SE T SE J - Metripack 8 male 8H SE T SE 8-75 See section J for housing details. 7 Voltage rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 9 Coil series H - series, 9 W For coil part numbers and dimensions see section C. Special features - None (Only required if valve has special features, omitted if. ) Dimensions mm (inch) Torque cartridge in housing Nm (5- ft lbs) S Nm (5-55 ft lbs) 9,6 (.6) NNote: For applications above bar please consult our technical department or use the steel body option. Installation drawing (Steel) 57.8 (.8) Ø 8,9 (.5), (.87) hex 5.8 (.) 9. (.75). (.7) 6.5 (.5) 57,8 (.8) 9.5 (.7).6 (.75) X 7. (.8),7 (.5) 5, (.) hex.875" Thd. Ø 5,8 (.6) 6.5 (.5) Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Warning luminum housings can be used for pressures up to bar ( psi). Steel housings must be used for operating pressures above bar ( psi). Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

40 SV--C/CM/CR - Solenoid valve -way, -position, normally closed, poppet type solenoid valve L/min ( USgpm) bar ( psi) Operation In the de-energized position the valve blocks flow from port to and free flow is allowed from port to. When the solenoid is energized the pilot poppet is pulled off the seat allowing the valve to open in both directions. Features Hardened and ground working parts. Lapped seat for low leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low pressure drop. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) bar ( psi) Cartridge fatigue pressure (infinite life) bar ( psi) Rated flow L/min ( USgpm) Internal leakage (port to port ) less than 5 drops/min, bar ( psi) Temperature range - to C (- to 8 F) Coil duty Continuous from 85% to % of nominal voltage Response times (% rated voltage and flow) Energize: 75 ms De-Energize: 5 ms C-- or C--U dd U after number if undercut is required. If undercut is not specified, expect 5 USgpm and USgpm higher pressure drop. Fluids ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) luminum Weight including coil,6 kg (.7 lbs) Seal kit (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way, -position, poppet type, pilot operated, normally closed solenoid valve. This valve is used in applications requiring low leakage, such as load holding applications or as a general purpose diverter or dump valve. Pressure drop curves Pressure Drop - psi 5 5 Flow - L/min (,8 cst 9 C) 6 8 B 6 Pressure Drop - bar Port to port de-energized B - Port to port energized 5 Flow - USgpm (5 SUS F) - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

41 Model code SV--C/CM/CR - Solenoid valve -way, -position, normally closed, poppet type solenoid valve L/min ( USgpm) bar ( psi) SV (V) C (*) () *** **** * Function SV - Solenoid valve Size - size Seal material Blank - Buna-N V - Viton Style C - Normally closed 5 Manual override option Blank - No manual override M - Knob type R - Cable type For valve dimensions with manual override option installed see page Port size Code Port size Housing number luminium Steel G / BSPP GU / BSPP G / BSPP GU / BSPP T SE TU SE T SE TU SE See section J for housing details. 8 Voltage rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 9 Connector types G - ISO DIN 65 Q - Spade terminals W - Flying lead N - Deutsch Y - mp JR D - Metripack 5 male J - Metripack 8 male Special features - None (Only required if valve has special features, omitted if. ) 6 Valve housing material Omit for cartridge only - luminum (standard) S - Steel Dimensions mm (inch) Torque cartridge in housing Nm (6-7 ft lbs) S - -5 Nm (75-85 ft lbs) 9,6 (.6) NNote: When solenoid valve is ordered as cartridge only, coil nut is included. Installation drawing (luminum) 6. (.7) NNote: Use J series, W coils with this solenoid valve. Ø 8,9 (.5) 9, (.75) hex.7 (.5) 88.9 (.5).7 (.5) 6.5 (.5) 8.7 (.) 5. (.) 59,8 (.6),7 (.76) Ø,75 (.95),7 (.5) hex.6 " Thd. 6.5 (.5) 88.9 (.5) X. (.6) Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 -

42 SV--C/CM - Solenoid valve -way, -position, normally closed, poppet type solenoid valve L/min ( USgpm) 5 bar (5 psi) Operation In the de-energized position the valve blocks flow from port to and free flow is allowed from port to. When the solenoid is energized the pilot poppet is pulled off the seat allowing the valve to open in both directions. Features Hardened and ground working parts. Lapped seat for low leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low pressure drop. 5 bar working pressure. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) 5 bar (5 psi) Cartridge fatigue pressure (infinite life) bar (5 psi) Rated flow L/min ( USgpm) Internal leakage less than 5 drops/min, 5 bar (5 psi) Temperature range - to C (- to F) Coil duty Continuous from 85% to % of nominal voltage C-- or C--U dd U after number if undercut is required. If undercut is not specified, expect 5 USgpm and USgpm higher pressure drop. Fluids ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) Steel Weight cartridge only,7 kg (.59 lbs) Seal kit (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way, -position, poppet type, high pressure, pilot operated, normally closed solenoid valve. This valve is used in applications requiring low leakage, such as load holding applications or as a general purpose diverter or dump valve. Pressure drop Pressure Drop - psi Flow - L/min (,8 cst 9 C) B Pressure Drop - bar Flow - USgpm (5 SUS F) - Port to port B - Port to port energized - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

43 SV--C/CM - Solenoid valve -way, -position, normally closed, poppet type solenoid valve L/min ( USgpm) 5 bar (5 psi) Model code SV (V) C (M) (S) ** **** * H Function SV - Solenoid valve Size - size Seal material Blank - Buna-N V - Viton Style C - Normally closed 5 Manual override option Blank - No manual override M - Manual override For valve dimensions with manual override option installed see page Valve housing material Blank - - luminum S - Steel (standard) 7 Port size Code Port size Housing number luminium Steel G / BSPP GU / BSPP G / BSPP GU / BSPP T SE TU SE T SE TU SE See section J for housing details. 8 Voltage rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 9 Connector types G - ISO DIN 65 Q - Spade terminals W - Flying lead N - Deutsch Y - mp JR D - Metripack 5 male J - Metripack 8 male Coil series H - series, 9 W For coil part numbers and dimensions see section C. Special features - None (Only required if valve has special features, omitted if. ) Dimensions mm (inch) Torque cartridge in housing 9,6 (.6) NNote: When solenoid valve is ordered as cartridge only, coil nut is included. NNote: For applications above bar please consult our technical department or use the steel body option Nm (6-7 ft lbs) S - -5 Nm (75-85 ft lbs) Ø 8,9 (.5), (.875) hex Installation drawing (Steel) 6. (.7) 6, (.7),7 (.76),75 (.5) hex.6" Thd. Ø,77 (.96).7 (.5) 88.9 (.5) 6.5 (.5) 88.9 (.5) 6.5 (.5) X. (.6) Over tightening may cause valve failure..7 (.5) 8.7 (.) 5. (.) Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 -

44 SBV--C - Solenoid valve -way, -position, normally closed, bi-directional, poppet type solenoid valve L/min ( USgpm) bar ( psi) Operation In the de-energized position the valve is blocked in both directions. When the solenoid is energized the pilot poppet is released from the seat allowing the main poppet to open. series of internal check valves allows full flow in both directions. Features Hardened and ground working parts. Lapped seat for low leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low pressure drop. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) bar ( psi) Cartridge fatigue pressure (infinite life) bar ( psi) Rated flow L/min ( USgpm) Internal leakage, port to port and port to port 5 drops/min, bar ( psi) Temperature range - to C (- to F) Coil duty Continuous from 85% to % of nominal voltage C-- or C--U dd U after number if undercut is required. If undercut is not specified, expect 5 USgpm and USgpm higher pressure drop. Fluids ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) luminum or steel Weight cartridge only,7 kg (.59 lbs) Seal kit (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way -position, bi-directional, pilot operated, normally closed poppet type screw in cartridge valve. The valve is ideal for isolating and holding actuators in position. Pressure drop Flow - L/min (,8 cst 9 C) Pressure Drop - psi Flow - USgpm (5 SUS F) B 8 6 Pressure Drop - bar - Port to port B - Port to port - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

45 SBV--C - Solenoid valve -way, -position, normally closed, bi-directional, poppet type solenoid valve L/min ( USgpm) bar ( psi) Model code SBV (V) C (*) ** **** * J Function SBV - Solenoid bi-directional valve Size - size Seal material Blank - Buna-N V - Viton Style C - Normally closed 5 Valve housing material Blank - - luminum (standard) S - Steel 6 Port size Code Port size Housing number luminium Steel G / BSPP GU / BSPP G / BSPP GU / BSPP T SE TU SE T SE TU SE See section J for housing details. 7 Voltage rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 8 Connector types G - ISO DIN 65 Q - Spade terminals W - Flying lead N - Deutsch Y - mp JR D - Metripack 5 male J - Metripack 8 male 9 Coil series J - series, W For coil part numbers and dimensions see section C. Special features - None (Only required if valve has special features, omitted if. ) Dimensions mm (inch) 9,6 (.6) Torque cartridge in housing Nm (6-7 ft lbs) S - -5 Nm (75-85 ft lbs) Installation drawing (luminum) NNote: When solenoid valve is ordered as cartridge only, coil nut is included. 6. (.7) Ø 8,9 (.5), (.87) hex.7 (.5).7 (.5) 8.7 (.) 5. (.) 6, (.7) 88.9 (.5) 6.5 (.5),7 (.76),75 (.5) hex.6" Thd. Ø,75 (.95) 6.5 (.5) 88.9 (.5) Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. X. (.6) Warning luminum housings can be used for pressures up to bar ( psi). Steel housings must be used for operating pressures above bar ( psi). Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

46 SBV--C - Solenoid valve -way, -position, normally closed, bi-directional, poppet type solenoid valve L/min ( USgpm) 5 bar (5 psi) Operation In the de-energized position the valve is blocked in both directions. When the solenoid is energized the pilot poppet is released from the seat allowing the main poppet to open. series of internal check valves allows full flow in both directions. Features Hardened and ground working parts. Lapped seat for low leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low pressure drop. 5 bar working pressure. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) 5 bar (5 psi) Cartridge fatigue pressure (infinite life) bar (5 psi) Rated flow L/min ( USgpm) Internal leakage, port to port and port to port 5 drops/min, 5 bar ( psi) Temperature range - to C (- to F) Coil duty Continuous from 85% to % of nominal voltage C-- or C--U dd U after number if undercut is required. If undercut is not specified, expect 5 USgpm and USgpm higher pressure drop. Fluids ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) luminum or steel Weight cartridge only,7 kg (.59 lbs) Seal kit (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way -position, high pressure bi-directional, pilot operated, normally closed poppet type screw in cartridge valve. The valve is ideal for isolating and holding actuators in position. Pressure drop Flow - L/min (,8 cst 9 C) Pressure Drop - psi Flow - USgpm (5 SUS F) B 8 6 Pressure Drop - bar - Port to port B - Port to port -6 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

47 SBV--C - Solenoid valve -way, -position, normally closed, bi-directional, poppet type solenoid valve L/min ( USgpm) 5 bar (5 psi) Model code SBV (V) C (*) ** **** * H Function SBV - Solenoid bi-directional valve Size - size Seal material Blank - Buna-N V - Viton Style C - Normally closed 5 Valve housing material Blank - - luminum S - Steel 6 Port size Code Port size Housing number luminium Steel G / BSPP GU / BSPP G / BSPP GU / BSPP T SE TU SE T SE TU SE See section J for housing details. 7 Voltage rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 8 Connector types G - ISO DIN 65 Q - Spade terminals W - Flying lead N - Deutsch Y - mp JR D - Metripack 5 male J - Metripack 8 male 9 Coil series H - series, 9 W For coil part numbers and dimensions see section C. Special features - None (Only required if valve has special features, omitted if. ) Dimensions mm (inch) 9,6 (.6) Torque cartridge in housing Nm (6-7 ft lbs) S - -5 Nm (75-85 ft lbs) Installation drawing (Steel) NNote: When solenoid valve is ordered as cartridge only, coil nut is included. 6. (.7) Ø 8,9 (.5), (.87) hex.7 (.5).7 (.5) 8.7 (.) 5. (.) 88.9 (.5) 6.5 (.5) 6, (.7) 6.5 (.5) 88.9 (.5) X. (.6),7 (.76),75 (.5) hex.6" Thd. Ø,75 (.95) Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Warning luminum housings can be used for pressures up to bar ( psi). Steel housings must be used for operating pressures above Over tightening may cause valve failure. bar ( psi). Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

48 SV-6-C/CM/CR - Solenoid valve -way, -position, normally closed, poppet type solenoid valve L/min (5 USgpm) bar ( psi) Operation In the de-energized position the valve blocks flow from port to and free flow is allowed from port to. When the solenoid is energized the pilot poppet is pulled off the seat allowing the valve to open in both directions. Features Hardened and ground working parts. Lapped seat for low leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low pressure drop. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) Cartridge fatigue pressure (infinite life) Rated flow Internal leakage, port to port Temperature range Coil duty Fluids bar ( psi) bar ( psi) L/min (5 USgpm) less than 5 drops/min, bar ( psi) - to C (- to 8 F) Continuous from 85% to % of nominal voltage C-6- ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) luminum Weight including coil,5 kg (.5 lbs) Seal kit 5658 (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way, -position, poppet type, pilot operated, normally closed solenoid valve. This valve is used in applications requiring low leakage, such as load holding applications or as a general purpose diverter or dump valve. Pressure drop Pressure Drop - psi 5 5 Flow - L/min (,8 cst 9 C) 6 8 B Pressure Drop - bar Flow - USgpm (5 SUS F) - Port to port energized B - Port to port de-energized -8 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

49 Model code SV-6-C/CM/CR - Solenoid valve -way, -position, normally closed, poppet type solenoid valve L/min (5 USgpm) bar ( psi) SV 6 (V) C (*) *** **** * Function SV - Solenoid valve Size 6-6 size Seal material Blank - Buna-N V - Viton Style C - Normally closed 5 Manual override option Blank - No manual override M - Knob type R - Cable type For valve dimensions with manual override option installed see page Port size Code Port size Housing number 6B / BSPP -756* T SE 5669* 6G / BSPP H SE H SE 566 See section J for housing details. *Light duty housing 7 Voltage rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 8 Connector types G - ISO DIN 65 Q - Spade terminals W - Flying lead N - Deutsch Y - mp JR D - Metripack 5 male J - Metripack 8 male For coil part numbers and dimensions see section C. 9 Special features - None (Only required if valve has special features, omitted if. ) Dimensions mm (inch) Torque cartridge in aluminum housing 8- Nm (8-9 ft lbs) NNote: When solenoid valve is ordered as cartridge only, coil nut is included. NNotes: Use J series, W coils with this solenoid valve. Installation drawings 9,6 (.6) 65.5 (.58) Ø 8,9 (.5) 6,5 (.5) 9, (.75) hex 88.9 (.5) 6.5 (.5) 8. (.) X 8.7 (.).8 (.5) 8, (.5) hex. (.) 68.8 (.688) 88.9 (.5), (.75)." Thd. Ø 8,55 (.) Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

50 SV-6-C/CM - Solenoid valve Poppet type, normally closed solenoid valve, (free reverse flow) L/min (5 USgpm) 5 bar (5 psi) Operation In the de-energized position the valve blocks flow from port to and free flow is allowed from port to. When the solenoid is energized the pilot poppet is pulled off the seat allowing the valve to open in both directions. Features Hardened and ground working parts. Lapped seat for low leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low pressure drop. 5 bar working pressure. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) Cartridge fatigue pressure (infinite life) Rated flow Internal leakage Temperature range Coil duty Fluids 5 bar (5 psi) bar (5 psi) L/min (5 USgpm) less than 5 drops/min, 5 bar (5 psi) - to C (- to F) Continuous from 85% to % of nominal voltage C-6- ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc Filtration Cleanliness code 8/6/ Housing material (standard) Steel Weight cartridge only,9 kg (.85 lbs) Seal kit 5658 (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way, -position, poppet type, high pressure, pilot operated, normally closed solenoid valve. This valve is used in applications requiring low leakage, such as load holding applications or as a general purpose diverter or dump valve. Pressure drop Pressure Drop - psi 5 5 Flow - L/min (,8 cst 9 C) 6 8 B Pressure Drop - bar Flow - USgpm (5 SUS F) - Port to port energized B - Port to port de-energized -5 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

51 Model code SV-6-C/CM - Solenoid valve Poppet type, normally closed solenoid valve, (free reverse flow) L/min (5 USgpm) 5 bar (5 psi) SV 6 (V) C (M) (S) ** **** * H Function SV - Solenoid valve Size 6-6 size Seal material Blank - Buna-N V - Viton Style C - Normally closed 5 Manual override option Blank - No manual override M - Manual override For valve dimensions with manual override option installed see page Valve housing material Blank - S - Steel 7 Port size 9 Connector types Code Port size Housing number G - ISO DIN 65 Q - Spade terminals G / BSPP -756 W - Flying lead 6G / BSPP -757 N - Deutsch T SE -75 Y - mp JR T SE -755 D - Metripack 5 male See section J for housing details. J - Metripack 8 male 8 Voltage rating - No coil - VC D - VDC D - VDC 5-5VC - VC Coil series H - Series, 9 W 6D - 6VDC B - VDC/w diode* For coil part numbers and dimensions see section C. B - VDC/w diode* *Optional arc suppression diode. Special features - None (Only required if valve has special features, omitted if.) Dimensions mm (inch) Torque cartridge in steel housing 6-9 Nm (- ft lbs) 9,6 (.6) NNote: When solenoid valve is ordered as cartridge only, coil nut is included. Installation drawing 6. (.5) 6, (.5),6 (.76) Ø 8,9 (.5) 8, (.5) hex Ø 8,5 (.), (.875) hex." Thd. 76. (.).7 (.5) 6.5 (.5) 5. (.) X. (.) 5. (.) Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. 6.5 (.5) 88.9 (.5) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

52 SV--C/CM/CR - Solenoid valve Poppet type, normally closed solenoid valve (free reverse flow) 7 L/min (6 USgpm) bar ( psi) Operation In the de-energized position the valve blocks flow from port to and free flow is allowed from port to. When the solenoid is energized the pilot poppet is pulled off the seat allowing the valve to open in both directions. Features Hardened and ground working parts. Lapped seat for low leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low pressure drop. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) bar ( psi) Cartridge fatigue pressure (infinite life) bar ( psi) Rated flow 7 L/min (6 USgpm) Internal leakage, port to port less than 5 drops/min, bar ( psi) Temperature range - to C (- to 8 F) Coil duty Continuous from 85% to % of nominal voltage C-- Fluids ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) luminum Weight including coil, kg (.7 lbs) Seal kit (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way, -position, poppet type, pilot operated, normally closed solenoid valve. This valve is used in applications requiring low leakage, such as load holding applications or as a general purpose diverter or dump valve. Pressure drop Pressure Drop - psi Flow - L/min (,8 cst 9 C) 8 6 B 5 6 Flow - USgpm (5 SUS F) 8 6 Pressure Drop - bar - Port to port de-energized B - Port to port energized -5 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

53 Model code SV--C/CM/CR - Solenoid valve Poppet type, normally closed solenoid valve (free reverse flow) 7 L/min (6 USgpm) bar ( psi) SV (V) C (*) *** **** * Function SV - Solenoid valve Size - size Seal material Blank - Buna-N V - Viton Style C - Normally closed 5 Manual override option Blank - No manual override M - Knob type R - Cable type For valve dimensions with manual override option installed see page Port size 8 Connector types Code Port size Housing number G - ISO DIN 65 Q - Spade terminals 8B BSPP -756* W - Flying lead 6T SE * N - Deutsch 6G / BSPP 8767 Y - mp JR 8G BSPP 8767 D - Metripack 5 male H SE H SE J - Metripack 8 male *Light duty housing. See section J for housing details. For coil part numbers and dimensions see section C. 7 Voltage rating - No coil D - VDC - VC 5-5VC 9 Special features - None D - VDC 6D - 6VDC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. (Only required if valve has special features, omitted if.) Dimensions mm (inch) Torque cartridge in aluminum housing 8-55 Nm (95-5 ft lbs) 9,6 (.6) NNote: When solenoid valve is ordered as cartridge only, coil nut is included. Installation drawing NNote: Use J series, W coils with this solenoid valve. 6.5 (.5). (.6) Ø 8,9 (.5) 9, (.75) hex 76. (.).6 (.) X 8.7 (.) 6. (.) 6,5 (.5). (.) 75. (.97).6 (.) 7,6 (.87) hex 57, (.5) Ø 6,7 (.6).65" Thd. Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

54 SV--C/CM - Solenoid valve Poppet type, pilot operated solenoid valve 7 L/min (6 USgpm) 5 bar (5 psi) Operation In the de-energized position the valve blocks flow from port to and free flow is allowed from port to. When the solenoid is energized the pilot poppet is pulled off the seat allowing the valve to open in both directions. Features Hardened and ground working parts. Lapped seat for low leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low pressure drop. 5 bar working pressure. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) 5 bar (5 psi) Cartridge fatigue pressure (infinite life) bar (5 psi) Rated flow 7 L/min (6 USgpm) Internal leakage less than 5 drops/min, 5 bar (5 psi) Temperature range - to C (- to F) Coil duty Continuous from 85% to % of nominal voltage C-- Fluids ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc Filtration Cleanliness code 8/6/ Housing material (standard) Steel Weight cartridge only,6 kg (.7 lbs) Seal kit (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way, -position, poppet type, high pressure, pilot operated, normally closed solenoid valve. This valve is used in applications requiring low leakage, such as load holding applications or as a general purpose diverter or dump valve. Pressure drop Flow - L/min (,8 cst 9 C) B 7 Pressure Drop - psi Flow - USgpm (5 SUS F) Pressure Drop - bar - Port to port energized B - Port to port de-energized -5 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

55 Model code SV--C/CM - Solenoid valve Poppet type, pilot operated solenoid valve 7 L/min (6 USgpm) 5 bar (5 psi) SV (V) C (M) (S) ** **** * H Function SV - Solenoid valve Size - size Seal material Blank - Buna-N V - Viton Style C - Normally closed 5 Manual override option Blank - No manual override M - Manual override For valve dimensions with manual override option installed see page Port size 9 Connector types Code Port size Housing number G - ISO DIN 65 Q - Spade terminals 6G / BSPP -75 W - Flying lead 8G BSPP -75 N - Deutsch T SE -758 Y - mp JR 6T SE D - Metripack 5 male See section J for housing details. J - Metripack 8 male 8 Voltage rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. Coil series H - Series, 9 W For coil part numbers and dimensions see section C. Special features - None (Only required if valve has special features, omitted if.) 6 Valve housing material Blank - S - Steel Dimensions mm (inch) Torque cartridge in steel housing 6-8 Nm (-5 ft lbs) NNote: When solenoid valve is ordered as cartridge only, coil nut is included. 9,6 (.6) Ø 8,9 (.5), (.875) hex 7,6 (.875) hex.65" Thd. 6, (.5) 57, (.5) Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Ø 6,7 (.6) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

56 SV-8-C/CM - Solenoid valve Spool type, normally closed solenoid valve L/min ( USgpm) bar ( psi) Operation In the de-energized position the valve blocks flow in both directions. When the solenoid is energized the spool moves allowing the valve to open in both directions. Features Hardened, ground and honed working parts to limit leakage. IP69 Tough coil compatibility. Continuously rated. Compact design with low pressure drop. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) Cartridge fatigue pressure (infinite life) Rated flow Internal leakage Temperature range Coil duty Response times (% rated voltage and flow) Fluids bar ( psi) bar ( psi) L/min ( USgpm) 8 cm /min (5 in /min) bar ( psi) - to C (- to 8 F) Continuous from 85% to % of nominal voltage Energize: 7 ms. De-Energize: ms C-8- ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc Filtration Cleanliness code 8/6/ Housing material (standard) luminum Weight including coil,7 kg (.6 lbs) Seal kit (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way, -position, spool type, direct acting, normally closed solenoid valve. This valve is used in applications where the flow needs to be blocked in both directions when the solenoid is de-energized. Pressure drop Pressure Drop - psi Flow - L/min (,8 cst 9 C) Pressure Drop - bar Flow - USgpm (5 SUS F) Port to port or port to port energized -56 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

57 Model code SV-8-C/CM - Solenoid valve Spool type, normally closed solenoid valve L/min ( USgpm) bar ( psi) SV 8 (V) C (M) (F) () ** **** * S Function SV - Solenoid valve Size 8-8 size Seal material Blank - Buna-N V - Viton Style C - Normally closed 5 Manual override option Blank - No manual override M - Knob type For valve dimensions with manual override option installed see page Filter option Blank - None F - Filter screen 8 Port size Code Port size Housing number G / BSPP -677 G /8 BSPP -678 T SE -67 6T SE T SE 8-67 See section J for housing details. 9 Voltage rating - No coil D - VDC D - VDC 6D - 6VDC 7 Valve housing material Omit for cartridge only - luminum - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. Connector types G - ISO DIN 65 Q - Spade terminals W - Flying lead N - Deutsch Y - mp JR D - Metripack 5 male J - Metripack 8 male Coil series S - 8 series, W For coil part numbers and dimensions see section C. Special features - None (Only required if valve has special features, omitted if.) Dimensions mm (inch) Torque cartridge in aluminum housing - Nm (5- ft lbs) NNote: When solenoid valve is ordered as cartridge only, coil nut is included. 6, (.) Installation drawing 9. (.75) Hex Ø,7 (.5) 5.8 (.). (.875) Hex 5.5 (.6) 5,8 (.) 7,8 (.9) Ø,6 (.97) 9, (.75) hex, (.87) hex.75" 6 Thd. 8. (.5) 5.8 (.). (.). (.7) 5.8 (.) X 7. (.8) Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. 9. (.75) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

58 SV-8-C/CM - Solenoid valve Spool type, normally closed solenoid valve, 5 bar L/min ( USgpm) 5 bar (5 psi) Operation In the de-energized position the valve blocks flow in both directions. When the solenoid is energized the spool moves allowing the valve to open in both directions. Features Hardened, ground and honed working parts to limit leakage. IP69 Tough coil compatibility. Continuously rated. Compact design with low pressure drop. 5 bar working pressure. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) Cartridge fatigue pressure (infinite life) Rated flow Internal leakage, port to port Temperature range Coil duty Fluids 5 bar (5 psi) bar (5 psi) L/min ( USgpm) cm (8.5in /min) 5 bar (5 psi) - to C (- to F) Continuous from 85% to % of nominal voltage C-8- ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc Filtration Cleanliness code 8/6/ Housing material (standard) Steel Weight cartridge only, kg (.5 lbs) Seal kit (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way, -position, spool type, high pressure, direct acting, normally closed solenoid valve. This valve is used in applications where the flow needs to be blocked in both directions when the solenoid is de-energized. Pressure drop Pressure Drop - psi Flow - L/min (,8 cst 9 C) Pressure Drop -bar Flow - USgpm (5 SUS F) Port to port or port to port energized -58 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

59 Model code SV-8-C/CM - Solenoid valve Spool type, normally closed solenoid valve, 5 bar L/min ( USgpm) 5 bar (5 psi) SV 8 (V) C (M) (S) ** **** * P Function SV - Solenoid valve Size 8-8 size Seal material Blank - Buna-N V - Viton 7 Port size 9 Connector types Code Port size Housing number G - ISO DIN 65 Q - Spade terminals G / BSPP -67 W - Flying lead G /8 BSPP -67 N - Deutsch T SE -676 Y - mp JR 6T SE D - Metripack 5 male 8T SE See section J for housing details. J - Metripack 8 male Style C - Normally closed 5 Manual override option Blank - No manual override M - Manual override For valve dimensions with manual override option installed see page Voltage rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. Coil series P - 8 series, W For coil part numbers and dimensions see section C. Special features - None (Only required if valve has special features, omitted if.) 6 Valve housing material Blank - S - Steel Dimensions mm (inch) 6, (.) Torque cartridge in steel housing - Nm (5- ft lbs) Installation drawing NNote: When solenoid valve is ordered as cartridge only, coil nut is included. 5.8 (.) Ø,7 (.5) 5,8 (.6) hex 5.8 (.) 5.8 (.) 8. (.5) X 7. (.8) 5.5 (.6) 9. (.75) 7,7 (.9), (.87) hex.75" 6 Thd.. (.). (.7) 5.8 (.) Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause Ø,6 (.5) valve failure. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

60 SV--C/CM/CR - Solenoid valve Spool type, normally closed solenoid valve L/min (6 USgpm) bar ( psi) Operation In the de-energized position the valve blocks flow in both directions. When the solenoid is energized the spool moves allowing the valve to open in both directions. Features Hardened, ground and honed working parts to limit leakage. IP69 Tough coil compatibility. Continuously rated. Compact design with low pressure drop. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) Cartridge fatigue pressure (infinite life) Rated flow Internal leakage Temperature range Coil duty Fluids bar ( psi) bar ( psi) L/min (6 USgpm) 8 cm /min (5 in /min) bar ( psi) - to C (- to 8 F) Continuous from 85% to % of nominal voltage C-- ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) luminum Weight including coil, kg (.87 lbs) Seal kit (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way, -position, spool type, direct acting, normally closed solenoid valve. This valve is used in applications where the flow needs to be blocked in both directions when the solenoid is de-energized. Pressure drop Pressure Drop - psi Flow - L/min (,8 cst 9C) Pressure Drop - bar Pressure (psi) Flow (L/min) 8 6 B Pressure (bar) Flow - USgpm (5 SUS F) Flow (USgpm) Pressure drop vs. Flow Operating Limits Port to port or port to port energized - Port to port B - Port to port -6 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

61 SV--C/CM/CR - Solenoid valve Spool type, normally closed solenoid valve L/min (6 USgpm) bar ( psi) Model code SV (V) C (*) (F) ** **** * Function SV - Solenoid valve Size - size Seal material Blank - Buna-N V - Viton Style C - Normally closed 5 Manual override option Blank - No manual override M - Knob type R - Cable type For valve dimensions with manual override option installed see page Port size 9 Connector types Code Port size Housing number G - ISO DIN 65 Q - Spade terminals B /8 BSPP -756* W - Flying lead 6T SE * N - Deutsch G / BSPP 8767 Y - mp JR G /8 BSPP 8767 D - Metripack 5 male 6H SE H SE J - Metripack 8 male *Light duty housing. See section J for housing details. For coil part numbers and dimensions see section C. 8 Voltage rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. Special features - None (Only required if valve has special features, omitted if.) NNote: Use J series, W coils with this solenoid valve. 6 Filter option Blank - None F - Filter screen Dimensions mm (inch) 9,6 (.6) Torque cartridge in steel housing 5-5 Nm (5- ft lbs) NNote: When solenoid valve is ordered as cartridge only, coil nut is included. Installation drawing Ø 8,9 (.5) 9, (.75) hex 57. (.5) 5. (.) 9. (.75) Hex 5. (.) Hex 5. (.) 57, (.5) X 7. (.8) 6.5 (.5).8 (.8),7 (.5) 5, (.) hex.875" Thd. 9.5 (.7) 6.5 (.5) Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve Ø 5,8 (.6) tube nut. Over tightening may cause valve failure. 9. (.75) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

62 SV--C/CM - Solenoid valve Spool type, normally closed solenoid valve L/min (6 USgpm) 5 bar (5 psi) Operation In the de-energized position the valve blocks flow in both directions. When the solenoid is energized the spool moves allowing the valve to open in both directions. Features Hardened, ground and honed working parts to limit leakage. IP69 Tough coil compatibility. Continuously rated. Compact design with low pressure drop. 5 bar working pressure. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) 5 bar (5 psi) Cartridge fatigue pressure (infinite life) bar (5 psi) Rated flow L/min (6 USgpm) Internal leakage cm /min (8.5 in /min) 5 bar (5 psi) Temperature range - to C (- to F) Coil duty Continuous from 85% to % of nominal voltage C-- Fluids ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc Filtration Cleanliness code 8/6/ Housing material (standard) Steel Weight cartridge only,8 kg (.9 lbs) Seal kit (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way, -position, spool type, high pressure, direct acting, normally closed solenoid valve. This valve is used in applications where the flow needs to be blocked in both directions when the solenoid is de-energized. Pressure drop Pressure Drop - psi 75 5 Flow - L/min (,8 cst 9 C) Flow - USgpm (5 SUS F) 7 5 Pressure Drop - bar - Port to port energized B - Port to port de-energized -6 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

63 Model code SV--C/CM - Solenoid valve Spool type, normally closed solenoid valve L/min (6 USgpm) 5 bar (5 psi) SV (V) C (M) (S) ** **** * H Function SV - Solenoid valve Size - size Seal material Blank - Buna-N V - Viton Style C - Normally closed 5 Manual override option Blank - No manual override M - Manual override For valve dimensions with manual override option installed see page Port size 9 Connector types Code Port size Housing number G - ISO DIN 65 Q - Spade terminals G / BSPP -75 W - Flying lead G /8 BSPP -75 N - Deutsch 6T SE 6-75 Y - mp JR 8T SE 8-75 D - Metripack 5 male See section J for housing details. J - Metripack 8 male 8 Voltage rating - No coil - VC D - VDC D - VDC 6D - 6VDC 5-5VC - VC B - VDC/w diode* Coil series H - Series, 9 W For coil part numbers and dimensions see section C. B - VDC/w diode* *Optional arc suppression diode. Special features - None (Only required if valve has special features, omitted if.) 6 Valve housing material Blank - S - Steel Dimensions mm (inch) Torque cartridge in steel housing Nm (5-55 ft lbs) 9,6 (.6) NNote: When solenoid valve is ordered as cartridge only, coil nut is included. Ø 8,9 (.5), (.875) hex 5, (.) hex.875" Thd. 57,8 (.8),7 (.5) Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Ø 5,8 (.6) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

64 S7 - Solenoid valve Poppet type, normally open solenoid valve Port - L/min (.5 USgpm) 5 bar (5 psi) Port - L/min (.5 USgpm) bar ( psi) Operation In the de-energized position the valve allows free flow from port to. When the solenoid is energized the poppet closes the valve blocking flow from port to and to. Features High flow capacity with reduced space requirements. No dynamic seals. Standard valve bodies and common cavities. One-piece encapsulated coil with minimal amperage draw. Oil immersed armature solenoid. Various coil terminals and voltages. Coil interchangeability with valves of same series. Manual override, seal variations and other options available. Sealed coil arrangement to protect stem from corrosion. Sectional view Performance data Ratings and specifications Performance data is typical with viscosity at cst (5 SSU) Max working pressure Port bar ( psi) Port 5 bar (5 psi) Rated flow L/min (.5 USgpm) Internal leakage. ml/min (5 dpm) when energized bar differential at est. Temperature range - to C (- to +8 F) 879 (see Section M) Torque cartridge into cavity Nm (5 lbs ft) Mounting position Unrestricted Fluids ll general purpose hydraulics fluids such as MIL-H-566, SE, SE, etc Seal material Standard Viton with PTFE back up rings Filtration BS55/ Class 8/ (5 micron or better) Nominal viscosity range 5 to 5 cst Standard housing materials luminium Cartridge material Working parts hardened and ground steel. External surfaces zinc plated. Coil Weight. kg (. lbs) Weight. kg (. lbs) Seal kit SKV (Viton) Coil part number C-*-*/ Coil voltage available, VDC,,, VC* Viton is a registered trademark of E.I. DuPont *C coils must be used with a rectifying connector Description This is a -way, -position, poppet type, low flow, high pressure, normally open solenoid valve. This valve is used as a pilot valve to control pilot lines or as the pilot valve for logic elements. It can be used to vent systems up to 5 bar (5psi) on the inlet port but the outlet port should be limited to bar (psi). Pressure drop Pressure - psi Flow - L/min Flow - US gpm Pressure - bar -6 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

65 S7 - Solenoid valve Poppet type, normally open solenoid valve Port - L/min (.5 USgpm) 5 bar (5 psi) Port - L/min (.5 USgpm) bar ( psi) Model code S7 V H W 5 Function S7 - Normally open Seal material V - Viton Voltage - VDC - VDC - VC - VC Coil Termination H - DIN65 F - Flying lead DM - Deutsch moulded Other terminations available on request. 5 Port sizes Code Port size Housing number - Body only luminium Steel W / BSP 85 W /8 BSP 75 6T /8 SE Dimensions mm (inch) NNote: For applications above bar please consult our technical department or use the steel body option. Installation drawing (luminum, steel).5 (.9) 8. (.85) 6. (.) 5. (.97) holes Ø6.8 (.7) thro 59. (.) 8.5 (.5). (.87).8 (.5) 5.8 (.) 7. (.7). /F / -6-UNF- 8.5 (.) 6. (.6) 9. (.75) 6. (.) 6. (.) 5.9 (.6).8 (.5) Ø.6 (.5) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

66 SV5-8-O/OP/OS - Solenoid valve Poppet type, normally open solenoid valve L/min (6 USgpm) bar ( psi) Operation In the de-energized position the valve allows free flow from port to and a restricted flow through the pilot orifice from port to. When the solenoid is energized the pilot poppet closes the orifice and the valve closes blocking flow from port to while allowing free flow from port to. Features Hardened and ground working parts. Lapped seat for low leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low pressure drop. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) bar ( psi) Cartridge fatigue pressure (infinite life) bar ( psi) Rated flow L/min (6 USgpm) Internal leakage less than 5 drops/min, bar ( psi) with valve energized Temperature range - to C (- to 8 F) Coil duty Continuous from 85% to % of nominal voltage Response times (% rated voltage and flow) Energize: ms. De-Energize: 5 ms C-8- ll general purpose hydraulic fluids such as: Fluids MIL-H-566, SE, SE etc Filtration Cleanliness code 8/6/ Housing material (standard) luminum Weight including coil,8 kg (.6 lbs) Seal kit (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way, -position, poppet type, pilot operated, normally open solenoid valve. This valve is used in applications requiring low leakage, such as load holding applications or as a general purpose diverter or dump valve. Pressure drop Flow - L/min (,8 cst 9 C) Pressure Drop - psi B 8 Pressure Drop - bar 5 6 Flow - USgpm (5 SUS F) - Port to port energized B - Port to port de-energized -66 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

67 Model code SV5-8-O/OP/OS - Solenoid valve Poppet type, normally open solenoid valve L/min (6 USgpm) bar ( psi) SV5 8 (V) O (*) (F) () ** **** * S Function SV5 - Solenoid valve Size 8-8 size Seal material Blank - Buna-N V - Viton Style O - Normally open 5 Manual override option Blank - No manual override P - Push type S - Screw type For valve dimensions with manual override option installed see page Filter option Blank - None F - Filter screen 8 Port size Code Port size Housing number G / BSPP -677 G /8 BSPP -678 T SE -67 6T SE T SE 8-67 See section J for housing details. 9 Voltage rating - No coil D - VDC D - VDC 6D - 6VDC 7 Valve housing material Omit for cartridge only - luminum - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. Connector types G - ISO DIN 65 Q - Spade terminals W - Flying lead N - Deutsch Y - mp JR D - Metripack 5 male J - Metripack 8 male Coil series S - 8 series, W For coil part numbers and dimensions see section C. Special features - None (Only required if valve has special features, omitted if.) Dimensions mm (inch) Torque cartridge in aluminum housing - Nm (5- ft lbs) NNote: When solenoid valve is ordered as cartridge only, coil nut is included. 6, (.) Installation drawing 9. (.75) Hex 5.8 (.) Ø,7 (.5) 9. (.75). (.875) Hex 9. (.75) 9, (.75) hex 8. (.5) X (.8) (.) 5.5 (.6) 5.8 (.) 7,8 (.9), (.87) hex. (.) Warning.75" 6 Thd. Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause Ø,6 (.97) valve failure.. (.7) 5.8 (.) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

68 SV5-8-O/OP/OS - Solenoid valve Poppet type, normally open solenoid valve 7 L/min ( USgpm) 5 bar (5 psi) Operation In the de-energized position the valve allows free flow from port to and a restricted flow through the pilot orifice from port to. When the solenoid is energized the pilot poppet closes the orifice and the valve closes blocking flow from port to while allowing free flow from port to. Features Hardened and ground working parts. Lapped seat for low leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low pressure drop. 5 bar working pressure. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) Cartridge fatigue pressure (infinite life) Rated flow Internal leakage Temperature range Coil duty Fluids 5 bar (5 psi) bar (5 psi) 7 L/min ( USgpm) 5 drops/min, bar ( psi) - to C (- to F) Continuous from 85% to % of nominal voltage C-8- ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc Filtration Cleanliness code 8/6/ Housing material (standard) Steel Weight cartridge only, kg (.5 lbs) Seal kit (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way, -position, poppet type, high pressure, pilot operated, normally open solenoid valve. This valve is used in applications requiring low leakage, such as load holding applications or as a general purpose diverter or dump valve. Pressure drop Flow - L/min (,8 cst 9 C) Pressure Drop - psi B Pressure Drop - bar 6 8 Flow - USgpm (5 SUS F) - Port to port energized B - Port to port de-energized -68 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

69 Model code SV5-8-O/OP/OS - Solenoid valve Poppet type, normally open solenoid valve 7 L/min ( USgpm) 5 bar (5 psi) SV5 8 (V) O (*) (S) ** **** * P Function SV5 - Solenoid valve Size 8-8 size Seal material Blank - Buna-N V - Viton 7 Port size 9 Connector types Code Port size Housing number G - ISO DIN 65 Q - Spade terminals G / BSPP -67 W - Flying lead G /8 BSPP -67 N - Deutsch T SE -676 Y - mp JR 6T SE D - Metripack 5 male 8T SE See section J for housing details. J - Metripack 8 male Style O - Normally open 5 Manual override option Blank - No manual override P - Push type S - Screw type For valve dimensions with manual override option installed see page Voltage rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. Coil series P - 8 series, W For coil part numbers and dimensions see section C. Special features - None (Only required if valve has special features, omitted if.) 6 Valve housing material Blank - S - Steel Dimensions mm (inch) 6, (.) Torque cartridge in steel housing - Nm (5- ft lbs) NNote: When solenoid valve is ordered as cartridge only, coil nut is included. Installation drawing Ø,7 (.5) 9, (.75) hex 5.8 (.) 5.5 (.6) 5.8 (.) 8. (.5) 5.8 (.) X 7. (.8) 9. (.75) 7,6 (.8), (.87) hex.75" 6 Thd. Ø,6 (.5). (.). (.7) 5.8 (.) Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

70 SBV-8-O - Solenoid Bi-directional valve Bi-directional, normally open solenoid valve 6 L/min (5 USgpm) 5 bar (5 psi) Operation In the de-energized position the valve is open in both directions. series of internal check valves allows full flow in both directions. When the solenoid is energized the pilot poppet closes the pilot orifice causing the main poppet to close. Features Hardened and ground working parts. Lapped seat for low leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low pressure drop. 5 bar working pressure. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) 5 bar (5 psi) Cartridge fatigue pressure (infinite life) bar (5 psi) Rated flow 6 L/min (5 USgpm) Internal leakage, port to port & port to port 5 drops/min 5 bar (5 psi) when energized Temperature range - to C (- to F) Coil duty Continuous from 85% to % of nominal voltage C-8- Fluids ll general purpose hydraulics fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) luminum or steel Weight cartridge only, kg (.6 lbs) Seal kit (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way -position, high pressure bi-directional, pilot operated, normally open poppet type screw in cartridge valve. The valve is ideal for isolating and holding actuators in position. Pressure drop Pressure Drop - psi Flow - L/min (,8 cst 9 C) B 6 8 Pressure Drop - bar Flow - USgpm (5 SUS F) - Port to port B - Port to port -7 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

71 Model code SBV-8-O - Solenoid Bi-directional valve Bi-directional, normally open solenoid valve 6 L/min (5 USgpm) 5 bar (5 psi) SBV 8 (V) O (*) ** **** * P Function SBV - Solenoid bi-directional valve Size 8-8 size Seal material Blank - Buna-N V - Viton Style O - Normally open 5 Valve housing material Blank - - luminum S - Steel 6 Port size 8 Connector types Code Port size Housing number G - ISO DIN 65 luminium Steel Q - Spade terminals W - Flying lead G / BSPP N - Deutsch G /8 BSPP Y - mp JR T SE D - Metripack 5 male 6T SE T SE J - Metripack 8 male See section J for housing details. 7 Voltage rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 9 Coil series P - 8 Series, W For coil part numbers and dimensions see section C. Special features - None (Only required if valve has special features, omitted if.) Dimensions mm (inch) Torque cartridge in aluminum or steel housing - Nm (5- ft lbs) 6, (.) NNote: When solenoid valve is ordered as cartridge only, coil nut is included. Installation drawing (Steel) Ø,7 (.5) 9, (.75) hex 5.8 (.) 5.5 (.6) 5.8 (.) 8. (.5) 5.8 (.) X 7. (.8) 9. (.75) 7,7 (.9), (.87) hex.75" 6 Thd. Ø,6 (.97). (.). (.7) 5.8 (.) Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Warning luminum housings can be used for pressures up to bar ( psi). Steel housings must be used for operating pressures above bar ( psi). Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

72 SV-8-O/OP/OS - Solenoid valve Poppet type, normally open solenoid valve L/min (6 USgpm) bar ( psi) Operation In the de-energized position the valve allows free flow in both directions. When the solenoid is energized the pilot poppet closes the orifice and the valve closes blocking flow from port to while allowing free flow from port to. Features Hardened and ground working parts. Lapped seat for low leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low pressure drop. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) bar ( psi) Cartridge fatigue pressure (infinite life) bar ( psi) Rated flow L/min (6 USgpm) Internal leakage less than 5 drops/min, bar ( psi) with valve energized Temperature range - to C (- to 8 F) Coil duty Continuous from 85% to % of nominal voltage Response times (% rated voltage and flow) Energize: ms. De-Energize: 5 ms C-8- Fluids ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc Filtration Cleanliness code 8/6/ Housing material (standard) luminum Weight including coil,8 kg (.6 lbs) Seal kit (Buna-N) (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way, -position, poppet type, pilot operated, normally open solenoid valve. This valve is used in applications requiring low leakage, such as load holding applications or as a general purpose diverter or dump valve. Pressure drop Cartridge Only Pressure Drop - psi Flow - L/min (,8 cst 9 C) B 8 Pressure Drop - bar 5 6 Flow - USgpm (5 SUS F) - Port to port energized B - Port to port de-energized -7 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

73 Model code SV-8-O/OP/OS - Solenoid valve Poppet type, normally open solenoid valve L/min (6 USgpm) bar ( psi) SV 8 (V) O (*) (F) () ** **** * S Function SV - Solenoid valve Size 8-8 size Seal material Blank - Buna-N V - Viton Style O - Normally open 5 Manual override option Blank - No manual override P - Push type S - Screw type For valve dimensions with manual override option installed see page Filter option Blank - None F - Filter screen 8 Port size Code Port size Housing number G / BSPP -677 G /8 BSPP -678 T SE -67 6T SE T SE 8-67 See section J for housing details. 9 Voltage rating - No coil D - VDC D - VDC 6D - 6VDC 7 Valve housing material Omit for cartridge only - luminum - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. Connector types G - ISO DIN 65 Q - Spade terminals W - Flying lead N - Deutsch Y - mp JR D - Metripack 5 male J - Metripack 8 male Coil series S - 8 series, W For coil part numbers and dimensions see section C. Special features - None (Only required if valve has special features, omitted if.) Dimensions mm (inch) Torque cartridge in aluminum housing - Nm (5- ft lbs) 6, (.) NNote: When solenoid valve is ordered as cartridge only, coil nut is included. Installation drawing 6. (.5) 9. (.75) Hex Ø,7 (.5) 9. (.75). (.875) Hex 9. (.75) 9, (.75) hex 8. (.5) X (.8) (.) 5.5 (.6) 6. (.5). (.). (.7) 5.8 (.) 7,8 (.9), (.87) hex.75" 6 Thd. Ø,6 (.97) Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

74 SV--O/OP/OS - Solenoid valve Poppet type, normally open solenoid valve (free reverse flow) 5 L/min ( USgpm) bar ( psi) Operation In the de-energized position the valve allows free flow in both directions. When the solenoid is energized the pilot poppet closes the orifice and the valve closes blocking flow from port to while allowing free flow from port to. Features Hardened and ground working parts. Lapped seat for low leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low pressure drop. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) Cartridge fatigue pressure (infinite life) Rated flow Internal leakage, port to port Temperature range Coil duty Fluids bar ( psi) bar ( psi) 5 L/min ( USgpm) less than 5 drops/min bar ( psi) - to C (- to 8 F) Continuous from 85% to % of nominal voltage C-- ll general purpose hydraulics fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) luminum Weight including coil, kg (.87 lbs) Seal kit 5658 (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way, -position, poppet type, pilot operated, normally open solenoid valve. This valve is used in applications requiring low leakage, such as load holding applications or as a general purpose diverter or dump valve. Pressure drop Pressure Drop psi Flow - L/min (,8 cst 9 C) Flow - USgpm (5 SUS F) 6 5 Pressure Drop bar Port to port and port to port de-energized -7 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

75 Model code SV--O/OP/OS - Solenoid valve Poppet type, normally open solenoid valve (free reverse flow) 5 L/min ( USgpm) bar ( psi) SV (V) O (*) (F) ** **** * Function SV - Solenoid valve Size - size Seal material Blank - Buna-N V - Viton 7 Port size 9 Connector types Code Port size Housing number G - ISO DIN 65 Q - Spade terminals B /8 BSPP -756* W - Flying lead 6T SE * N - Deutsch G / BSPP 8767 Y - mp JR G /8 BSPP 8767 D - Metripack 5 male 6H SE H SE J - Metripack 8 male *Light duty housing. See section J for housing details. For coil part numbers and dimensions see section C. Style O - Normally open 5 Manual override option Blank - No manual override P - Push type S - Screw type For valve dimensions with manual override option installed see page Filter option Blank - None S - Filter Screen 8 Voltage rating - No coil D - VDC D - VDC 6D - 6VDC 9,6 (.6) - VC 5-5VC - VC B - VDC/w diode* - VDC/w diode* *Optional arc suppression diode. Special features - None (Only required if valve has special features, omitted if.) Dimensions mm (inch) Ø 8,9 (.5) 9, (.75) hex Torque cartridge in aluminum housing 7-5 Nm (5- ft lbs) NNote: Use J series, W coils with this solenoid valve. Installation drawing NNote: When solenoid valve is ordered as cartridge only, coil nut is included. 7, (.76) 7. (.77),7 (.5) 5, (.) hex Thd. Ø5,8 (.6) 6.5 (.5) 9.5 (.7).5 (.75) 6.5 (.5) Over tightening may cause valve failure..6 (.75) 9. (.75) X 7. (.8) 5. (.) Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

76 SV5--O/OP/OS - Solenoid valve Poppet type, normally open solenoid valve 5 L/min ( USgpm) bar ( psi) Operation In the de-energized position the valve allows free flow from port to and a restricted flow through the pilot orifice from port to. When the solenoid is energized the pilot poppet closes the orifice and the valve closes blocking flow from port to while allowing free flow from port to. Features Hardened and ground working parts. Lapped seat for low leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low pressure drop. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) Cartridge fatigue pressure (infinite life) Rated flow Internal leakage, port to port Temperature range Coil duty Fluids bar ( psi) bar ( psi) 5 L/min ( USgpm) Less than 5 drops/min bar ( psi) - to C (- to 8 F) Continuous from 85% to % of nominal voltage C-- ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) luminum Weight including coil, kg (.87 lbs) Seal kit (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way, -position, poppet type, pilot operated, normally open solenoid valve. This valve is used in applications requiring low leakage, such as load holding applications or as a general purpose diverter or dump valve. Pressure drop Flow - L/min(,8 cst 9 C ) Pressure Drop - psi Pressure Drop - bar 6 8 Flow - USgpm (5 SUS F) Port to port de-energized -76 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

77 SV5--O/OP/OS - Solenoid valve Poppet type, normally open solenoid valve 5 L/min ( USgpm) bar ( psi) Model code SV5 (V) O (*) (F) ** **** * Function SV5 - Solenoid valve Size - size Seal material Blank - Buna-N V - Viton 7 Port size 9 Connector types Code Port size Housing number G - ISO DIN 65 Q - Spade terminals B /8 BSPP -756* W - Flying lead 6T SE * N - Deutsch G / BSPP 8767 Y - mp JR G /8 BSPP 8767 D - Metripack 5 male 6H SE H SE J - Metripack 8 male *Light duty housing. See section J for housing details. For coil part numbers and dimensions see section C. Style O - Normally open 5 Manual override option Blank - No manual override P - Push type S - Screw type 8 Voltage rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. Special features - None (Only required if valve has special features, omitted if.) NNote: Use J series, W coils with this solenoid valve. For valve dimensions with manual override option installed see page Filter option Blank - None F - Filter screen Dimensions mm (inch) Torque cartridge in aluminum housing 7-5 Nm (5- ft lbs) NNote: When solenoid valve is ordered as cartridge only, coil nut is included. 9,6 (.6) Ø 8,9 (.5) 9, (.75) hex 7, (.76) Ø 5,8 (.6),7 (.5) 5, (.) hex.875" Thd. Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

78 SV5--O/OP/OS - Solenoid valve Poppet type, normally open solenoid valve 5 L/min ( USgpm) 5 bar (5 psi) Operation In the de-energized position the valve allows free flow from port to and a restricted flow through the pilot orifice from port to. When the solenoid is energized the pilot poppet closes the orifice and the valve closes blocking flow from port to while allowing free flow from port to. Features Hardened and ground working parts. Lapped seat for low leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low pressure drop. 5 bar working pressure. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) Cartridge fatigue pressure (infinite life) Rated flow Internal leakage Temperature range Coil duty Fluids 5 bar (5 psi) bar (5 psi) 5 L/min ( USgpm) less than 5 drops/min, 5 bar (5 psi) - to C (- to F) Continuous from 85% to % of nominal voltage C-- ll general purpose hydraulics fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) Steel Weight cartridge only,8 kg (.9 lbs) Seal kit 5658 (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way, -position, poppet type, high pressure, pilot operated, normally open solenoid valve. This valve is used in applications requiring low leakage, such as load holding applications or as a general purpose diverter or dump valve. Pressure drop Pressure Drop - psi Flow - L/min (,8 cst 9 C) 5 Pressure Drop - bar 6 8 Flow - USgpm (5 SUS F) Port to port de-energized -78 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

79 SV5--O/OP/OS - Solenoid valve Poppet type, normally open solenoid valve 5 L/min ( USgpm) 5 bar (5 psi) Model code SV5 (V) O (*) (S) ** **** * H Function SV5 - Solenoid valve Size - size Seal material Blank - Buna-N V - Viton Style O - Normally open 5 Manual override option Blank - No manual override P - Push type S - Screw type For valve dimensions with manual override option installed see page Port size Coil series H - series, 9W Code Port size Housing number G / BSPP -75 G /8 BSPP -75 6T SE T SE 8-75 See section J for housing details. 8 Voltage rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* - VDC/w diode* *Optional arc suppression diode. 9 Connector types G - ISO DIN 65 Q - Spade terminals W - Leadwire N - Deutsch Y - mp JR D - Metripack 5 male J - Metripack 8 male For coil part numbers and dimensions see section C. Special features - None (Only required if valve has special features, omitted if.) 6 Valve housing material Blank - S - Steel 9,6 (.6) Dimensions mm (inch) Ø 8,9 (.5), (.875) hex Torque cartridge in aluminum housing Nm (5-55 ft lbs) Installation drawing 57.8 (.8) NNote: When solenoid valve is ordered as cartridge only, nut is included. 57,8 (.8),7 (.5) 5, (.) hex Ø 5,8 (.6).875" Thd. 6.5 (.5) 9.5 (.7) 5. (.) 6.5 (.5) Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure..6 (.75) 9. (.75) X 7. (.8). (.87) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

80 SV--O/OP/OS - Solenoid valve Poppet type, normally open solenoid valve (free reverse flow) 5 L/min ( USgpm) 5 bar (5 psi) Operation In the de-energized position the valve allows free flow in both directions. When the solenoid is energized the pilot poppet closes the orifice and the valve closes blocking flow from port to while allowing free flow from port to. Features Hardened and ground working parts. Lapped seat for low leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low pressure drop. 5 bar working pressure. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) Cartridge fatigue pressure (infinite life) Rated flow Internal leakage Temperature range Coil duty Fluids 5 bar (5 psi) bar (5 psi) 5 L/min ( USgpm) less than 5 drops/min, 5 bar (5 psi) - to C (- to F) Continuous from 85% to % of nominal voltage C-- ll general purpose hydraulics fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) Steel Weight including coil,8 kg (.9 lbs) Seal kit 5658 (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way, -position, poppet type, high pressure, pilot operated, normally open solenoid valve. This valve is used in applications requiring low leakage, such as load holding applications or as a general purpose diverter or dump valve. pplication Note: This valve is pilot operated and requires a minimum flow of - L/min (.-.5 USgpm) in order to shift. For operation at very low flow conditions contact your Eaton representative. Pressure drop Pressure Drop - psi Flow - L/min (,8 cst 9 C) 6 8 Flow - USgpm (5 SUS F) 7 5 Pressure Drop - bar Port to port and port to port de-energized -8 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

81 SV--O/OP/OS - Solenoid valve Poppet type, normally open solenoid valve (free reverse flow) 5 L/min ( USgpm) 5 bar (5 psi) Model code SV (V) O (*) (S) ** **** * H Function SV - Solenoid valve Size - size Seal material Blank - Buna-N 7 Port size Coil series H - series, 9W Code Port size Housing number G / BSPP -75 G /8 BSPP -75 6T SE T SE 8-75 See section J for housing details. For coil part numbers and dimensions see section C. Special features - None (Only required if valve has special features, omitted if.) V - Viton Style O - Normally open 5 Manual override option Blank - No manual override P - Push type S - Screw type For valve dimensions with manual override option installed see page Voltage rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 9 Connector types G - ISO DIN 65 Q - Spade terminals W - Flying lead N - Deutsch Y - mp JR D - Metripack 5 male J - Metripack 8 male 6 Valve housing material Blank - S - Steel Dimensions mm (inch) 9,6 (.6) Torque cartridge in steel housing Nm (5-55 ft lbs) Installation drawing NNote: When solenoid valve is ordered as cartridge only, nut is included. Ø 8,9 (.5), (.875) hex 57. (.5) 57,8 (.8) 6.5 (.5) 5. (.) 9. (.75).7 (.87),7 (.5) 5, (.) hex Ø 5,8 (.6).875" Thd. 9.5 (.7).6 (.75) 6.5 (.5) X 7. (.8) Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

82 SBV--O - Solenoid Bi-directional valve Bi-directional, normally open solenoid valve 76 L/min ( USgpm) 5 bar (5 psi) Operation IIn the de-energized position the valve is open in both directions. series of internal check valves allows full flow in both directions. When the solenoid is energized the pilot poppet closes the pilot orifice causing the main poppet to close. Features Hardened and ground working parts. Lapped seat for low leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low pressure drop. 5 bar working pressure. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) Cartridge fatigue pressure (infinite life) Rated flow Internal leakage, port to port or port to port Temperature range Coil duty Fluids 5 bar (5 psi) bar (5 psi) 76 L/min ( USgpm) 5 drops/min, 5 bar (5 psi) - to C (- to F) Continuous from 85% to % of nominal voltage C-- ll general purpose hydraulics fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) luminum or Steel Weight including coil,8 kg (.9 lbs) Seal kit (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way -position, high pressure bi-directional, pilot operated, normally open poppet type screw in cartridge valve. The valve is ideal for isolating and holding actuators in position. Pressure drop Pressure Drop - psi Flow - L/min (,8 cst 9 C) 8 Pressure Drop - bar 8 6 Flow - USgpm (5 SUS F) Port to port or port to port de-energized -8 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

83 Model code SBV--O - Solenoid Bi-directional valve Bi-directional, normally open solenoid valve 76 L/min ( USgpm) 5 bar (5 psi) SBV (V) O (*) ** **** * H Function SBV - Solenoid bi-directional valve Size - size Seal material Blank - Buna-N V - Viton 6 Port size 8 Connector types Code Port size Housing number G - ISO DIN 65 Q - Spade terminals W - Flying lead N - Deutsch Y - mp JR D - Metripack 5 male J - Metripack 8 male luminium Steel G / BSPP G /8 BSPP B /8 BSPP -756* 6H SE T SE * -75 8H SE T SE 8-75 *Light duty housing. See section J for housing details. 9 Coil series H - series, 9W Style O - Normally open 5 Valve housing material Blank - - luminum S - Steel 7 Voltage rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. For coil part numbers and dimensions see section C. Special features - None (Only required if valve has special features, omitted if.) Dimensions mm (inch) Torque cartridge in housing Nm (5- ft lbs) S Nm (5-55 ft lbs) NNote: When solenoid valve is ordered as cartridge only, coil nut is included. 9,6 (.6) Installation drawing (Steel) 57.8 (.8) Ø 8,9 (.5), (.87) hex 5.8 (.) 9. (.75). (.7) 6.5 (.5) 57,8 (.8) 9.5 (.7).6 (.75) X 7. (.8),7 (.5) 5, (.) hex.875" thd Ø 5,8 (.6) 6.5 (.5) Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Warning luminum housings can be used for pressures up to bar ( psi). Steel housings must be used for operating pressures above bar ( psi). Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

84 SV--O/OP/OS - Solenoid valve Poppet type, normally open solenoid valve L/min ( USgpm) bar ( psi) Operation In the de-energized position the valve allows free flow in both directions. When the solenoid is energized the pilot poppet closes the orifice and the valve closes blocking flow from port to while allowing free flow from port to. Features Hardened and ground working parts. Lapped seat for low leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low pressure drop. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) bar ( psi) Cartridge fatigue pressure (infinite life) bar ( psi) Rated flow L/min ( USgpm) Internal leakage, port to port less than 5 drops/min, bar ( psi) Temperature range - to C (- to 8 F) Coil duty Continuous from 85% to % of nominal voltage C-- or C--U dd U after number if undercut is required. If undercut is not specified, expect psi@5 USgpm and USgpm higher pressure drop. Fluids ll general purpose hydraulics fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 7/5/ Housing material (standard) luminum Weight including coil,6 kg (.7 lbs) Seal kit (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way, -position, poppet type, pilot operated, normally open solenoid valve. This valve is used in applications requiring low leakage, such as load holding applications or as a general purpose diverter or dump valve. Pressure drop Pressure Drop - psi 5 5 Flow - L/min (,8 cst 9 C) B 8 Pressure Drop - bar Flow - USgpm (5 SUS F) - Port to port de-energized B - Port to port energized -8 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

85 Model code SV--O/OP/OS - Solenoid valve Poppet type, normally open solenoid valve L/min ( USgpm) bar ( psi) SV (V) O (*) () ***(U) **** * Function SV - Solenoid valve Size - size Seal material Blank - Buna-N V - Viton Style O - Normally open 5 Manual override option Blank - No manual override P - Push type S - Screw type For valve dimensions with manual override option installed see page Valve housing material Omit for cartridge only - luminum 7 Port size 9 Connector types Code Port size Housing number G - ISO DIN 65 G / BSPP -68 C-- Q - Spade terminals W - Flying lead 6G / BSPP -67 C-- N - Deutsch T SE -66 C-- Y - mp JR T SE -66 C-- D - Metripack 5 male GU / BSPP -66 C--U 6GU / BSPP -65 C--U J - Metripack 8 male TU SE -66 C--U TU SE -665 C--U For dimensions see section C. See section J for housing details. 8 Voltage rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. Special features - None (Only required if valve has special features, omitted if. ) Dimensions mm (inch) 9,6 (.6) Torque cartridge in aluminum housing 8-95 Nm (6-7 ft lbs) NNote: Use J series, W coils with this solenoid valve. Installation drawing NNote: When solenoid valve is ordered as cartridge only, coil nut is included. Ø 8,9 (.5) 7. (.88) 9, (.75) hex.7 (.5).7 (.5) 8.7 (.) 5. (.) 7. (.875) 88.9 (.5) 6.5 (.5),6 (.75) 8, (.5) hex." Thd. 6.5 (.5) 88.9 (.5) X. (.6) Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Ø.75 (.9) Over tightening may cause valve failure. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

86 SV--O/OP/OS - Solenoid valve Poppet type, normally open solenoid valve L/min ( USgpm) 5 bar (5 psi) Operation In the de-energized position the valve allows free flow in both directions. When the solenoid is energized the pilot poppet closes the orifice and the valve closes blocking flow from port to while allowing free flow from port to. Features Hardened and ground working parts. Lapped seat for low leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low pressure drop. 5 bar working pressure. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) 5 bar (5 psi) Cartridge fatigue pressure (infinite life) bar (5 psi) Rated flow L/min ( USgpm) Internal leakage less than 5 drops/min, 5 bar (5 psi) Temperature range - to C (- to F) Coil duty Continuous from 85% to % of nominal voltage C-- or C--U dd U after number if undercut is required. If undercut is not specified, expect psi@5 USgpm and USgpm higher pressure drop. Fluids ll general purpose hydraulics fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) Steel Weight including coil,7 kg (.59 lbs) Seal kit (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way, -position, poppet type, high pressure, pilot operated, normally open solenoid valve. This valve is used in applications requiring low leakage, such as load holding applications or as a general purpose diverter or dump valve. pplication Note: This value is pilot operated and requires a minimum flow of - L/min (.-.5 USgpm) in order to shift. For operation at very low flow conditions contact your Eaton representative. Pressure drop Pressure Drop - psi Flow - L/min (,8 cst 9 C) Flow - USgpm (5 SUS F) B 5 7 Pressure Drop - bar - Port to port de-energized B - Port to port de-energized -86 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

87 SV--O/OP/OS - Solenoid valve Poppet type, normally open solenoid valve L/min ( USgpm) 5 bar (5 psi) Model code SV (V) O (*) (S) ** **** * H Function SV - Solenoid valve Size - size Seal material Blank - Buna-N V - Viton Style O - Normally open 5 Manual override option Blank - No manual override P - Push type S - Screw type For valve dimensions with manual override option installed see page Valve housing material Blank - S - Steel 7 Port size Code Port size Housing number G / BSPP -756 GU / BSPP -75 6G / BSPP GU / BSPP -69 T SE -697 TU SE T SE TU SE See section J for housings. 8 Voltage rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 9 Connector types G - ISO DIN 65 Q - Spade terminals W - Flying lead N - Deutsch Y - mp JR D - Metripack 5 male J - Metripack 8 male Coil series H - series, 9 W For coil dimensions see section C. Special features - None (Only required if valve has special features, omitted if. ) Dimensions mm (inch) 9,6 (.6) Torque cartridge in steel housing -5 Nm (75-85 ft lbs) NNote: When solenoid valve is ordered as cartridge only, coil nut is included. Installation drawing Ø 8,9 (.5), (.875) hex.7 (.5) 6. (.7).7 (.5) 8.7 (.) 5. (.) 6, (.7) 88.9 (.5) 6.5 (.5),7 (.76),75 (.5) hex.6" Thd. 6.5 (.5) 88.9 (.5) X. (.6) Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Ø,77 Over tightening may cause (.96) valve failure. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

88 SBV--O - Solenoid valve Bi-directional, poppet type, normally open solenoid valve L/min ( USgpm) 5 bar (5 psi) Operation In the de-energized position the valve is open in both directions. series of internal check valves allows full flow in both directions. When the solenoid is energized the pilot poppet closes the pilot orifice causing the main poppet to close. Features Hardened and ground working parts. Lapped seat for low leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low pressure drop. 5 bar working pressure. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) 5 bar (5 psi) Cartridge fatigue pressure (infinite life) bar (5 psi) Rated flow L/min ( USgpm) Internal leakage 5 drops/min, 5 bar (5 psi) Temperature range - to C (- to F) Coil duty Continuous from 85% to % of nominal voltage C-- or C--U dd U after number if undercut is required. If undercut is not specified, expect psi@5 USgpm and USgpm higher pressure drop. Fluids ll general purpose hydraulics fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) luminum or steel Weight including coil,7 kg (.59 lbs) Seal kit (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way -position, high pressure bi-directional, pilot operated, normally open poppet type screw in cartridge valve. The valve is ideal for isolating and holding actuators in position. Pressure drop Pressure Drop - psi Flow - L/min (,8 cst 9 C) B 8 6 Pressure Drop - bar Flow - USgpm (5 SUS F) - Port to port B - Port to port -88 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

89 SBV--O - Solenoid valve Bi-directional, poppet type, normally open solenoid valve L/min ( USgpm) 5 bar (5 psi) Model code SBV (V) O (*) ** **** * H Function SBV - Solenoid bi-directional valve Size - size Seal material Blank - Buna-N V - Viton Style O - Normally open 5 Valve housing material Blank - - luminum S - Steel 6 Port size Code Port size Housing number luminium Steel G / BSPP GU / BSPP G / BSPP GU / BSPP T SE TU SE T SE TU SE See section J for housings. 7 Voltage rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 8 Connector types G - ISO DIN 65 Q - Spade terminals W - Flying lead N - Deutsch Y - mp JR D - Metripack 5 male J - Metripack 8 male 9 Coil series H - series, 9 W For coil dimensions see section C. Special features - None (Only required if valve has special features, omitted if. ) Dimensions mm (inch) Torque cartridge in housing Nm (6-7 ft lbs) S - -5 Nm (75-85 ft lbs) NNote: When solenoid valve is ordered as cartridge only, coil nut is included. 9,6 (.6) Installation drawing (Steel) Ø 8,9 (.5), (.875) hex.7 (.5) 6. (.7).7 (.5) 8.7 (.) 5. (.) 6, (.7) 88.9 (.5) 6.5 (.5),7 (.76),75 (.5) hex.6" Thd. Ø,75 (.95) 6.5 (.5) 88.9 (.5) Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. X. (.6) Warning luminum housings can be used for pressures up to bar ( psi). Steel housings must be used for operating pressures above bar ( psi). Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

90 SV-6-O/OP/OS - Solenoid valve Poppet type, normally open solenoid valve L/min (5 USgpm) bar ( psi) Operation In the de-energized position the valve allows free flow in both directions. When the solenoid is energized the pilot poppet closes the orifice and the valve closes blocking flow from port to while allowing free flow from port to. Features Hardened and ground working parts. Lapped seat for low leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low pressure drop. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) Cartridge fatigue pressure (infinite life) Rated flow Internal leakage, port to port Temperature range Coil duty Fluids bar ( psi) bar ( psi) L/min (5 USgpm) less than 5 drops/min, bar ( psi) - to C (- to 8 F) Continuous from 85% to % of nominal voltage C-6- ll general purpose hydraulics fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) luminum Weight including coil,9 kg (.98 lbs) Seal kit 5658 (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way, -position, poppet type, pilot operated, normally open solenoid valve. This valve is used in applications requiring low leakage, such as load holding applications or as a general purpose diverter or dump valve. Pressure drop Pressure Drop - psi Flow - L/min (,8 cst 9 C) 6 8 B 6 Pressure Drop - bar 5 5 Flow - USgpm (5 SUS F) - Port to port energized B - Port to port de-energized -9 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

91 SV-6-O/OP/OS - Solenoid valve Poppet type, normally open solenoid valve L/min (5 USgpm) bar ( psi) Model code SV 6 (V) O (*) () *** **** * Function SV - Solenoid valve Size 6-6 size Seal material Blank - Buna-N V - Viton Style O - Normally open 5 Manual override option Blank - No manual override P - Push type S - Screw type For valve dimensions with manual override option installed see page Port size Code Port size Housing number 6B / BSPP -756* T SE 5669* 6G / BSPP H SE H SE 566 *Light duty housing See section J for housings. 8 Voltage rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 9 Connector types G - ISO DIN 65 Q - Spade terminals W - Flying lead N - Deutsch Y - mp JR D - Metripack 5 male J - Metripack 8 male For coil dimensions see section C. Special features - None (Only required if valve has special features, omitted if. ) 6 Valve housing material Omit for cartridge only - luminum Dimensions mm (inch) 9,6 (.6) Torque cartridge in aluminum housing 8- Nm (8-9 ft lbs) Installation drawing NNote: When solenoid valve is ordered as cartridge only, coil nut is included. NNote: When J series, W coils with this solenoid valve. Ø 8,9 (.5) 76.6 (.) 9, (.75) hex 7. (.875) 88.9 (.5) 6.5 (.5) 8. (.) X 8.7 (.).8 (.5),6 (.75) 8, (.5) hex." Thd. Ø.75 (.9). (.) 68.8 (.688) 88.9 (.5) Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

92 SV-6-O/OP/OS - Solenoid valve Poppet type normally open solenoid valve L/min (5 USgpm) 5 bar (5 psi) Operation In the de-energized position the valve allows free flow in both directions. When the solenoid is energized the pilot poppet closes the orifice and the valve closes blocking flow from port to while allowing free flow from port to. Features Hardened and ground working parts. Lapped seat for low leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low Pressure drop. 5 bar working pressure. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) Cartridge fatigue pressure (infinite life) Rated flow Internal leakage Temperature range Coil duty Fluids 5 bar (5 psi) bar (5 psi) L/min (5 USgpm) less than 5 drops/min 5 bar (5 psi) - to C (- to F) Continuous from 85% to % of nominal voltage C-6- ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) Steel Weight,9 kg (.85 lbs) Seal kit 5658 (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way, -position, poppet type, high pressure, pilot operated, normally open solenoid valve. This valve is used in applications requiring low leakage, such as load holding applications or as a general purpose diverter or dump valve. Pressure drop Pressure Drop - psi Flow - L/min (,8 cst 9 C) Flow - USgpm (5 SUS F) B Pressure Drop - bar - Port to port de-energized B - Port to port -9 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

93 Model code SV-6-O/OP/OS - Solenoid valve Poppet type normally open solenoid valve L/min (5 USgpm) 5 bar (5 psi) SV 6 (V) O (*) (S) ** **** * H Function SV - Solenoid valve Size 6-6 size Seal material Blank - Buna-N V - Viton Style O - Normally open 5 Manual override option Blank - No manual override P - Push type S - Screw type For valve dimensions with manual override option installed see page Valve housing material Blank - S - Steel 7 Port size Code Port size Housing number G / BSPP G / BSPP -757 T SE -75 T SE -755 See section J for housing details. 8 Voltage rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 9 Connector types G - ISO DIN 65 Q - Spade terminals W - Flying lead N - Deutsch Y - mp JR D - Metripack 5 male J - Metripack 8 male Coil series H - series, 9 W For coil part numbers and dimensions see section C. Special features - None (Only required if valve has Special features, omitted if.) Dimensions mm (inch) 9,6 (.6) Torque cartridge in steel housing 6-9 Nm (- ft lbs) Note: When solenoid valve is ordered as, nut is included. Installation drawing Ø 8,9 (.5), (.875) hex 6. (.5) 6, (.5) 8, (.5) hex 76. (.) 6.5 (.5) 5. (.) X. (.) 5. (.),6 (.76) Ø 8,5 (.)." Thd..7 (.5) Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. 6.5 (.5) 88.9 (.5) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

94 SV--O/OP/OS - Solenoid valve Poppet type, normally open solenoid valve 7 L/min (6 USgpm) bar ( psi) Operation In the de-energized position the valve allows free flow in both directions. When the solenoid is energized the pilot poppet closes the orifice and the valve closes blocking flow from port to while allowing free flow from port to. Features Hardened and ground working parts. Lapped seat for low leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low Pressure drop. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) Cartridge fatigue pressure (infinite life) Rated flow Internal leakage, port to port Temperature range Coil duty Response times (% rated voltage and flow) Fluids bar ( psi) bar ( psi) 7 L/min (6 USgpm) less than 5 drops/min bar ( psi) - to C (- to 8 F) Continuous from 85% to % of nominal voltage Energize: 75 ms De-Energize: 5 ms C-- ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) luminum Weight including coil, kg (.7 lbs) Seal kit (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way, -position, poppet type, pilot operated, normally open solenoid valve. This valve is used in applications requiring low leakage, such as load holding applications or as a general purpose diverter or dump valve. Pressure drop Flow - L/min (,8 cst 9 C) Pressure Drop - psi B 5 Pressure Drop - bar Flow - USgpm (5 SUS F) 6 - Port to port and port to port de-energized B - Port to port energized -9 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

95 Model code SV--O/OP/OS - Solenoid valve Poppet type, normally open solenoid valve 7 L/min (6 USgpm) bar ( psi) SV (V) O (*) *** **** * Function SV - Solenoid valve Size - size Seal material Blank - Buna-N V - Viton Style O - Normally open 5 Manual override option Blank - No manual override P - Push type S - Screw type For valve dimensions with manual override option installed see page Port size Code Port size Housing number 8B BSPP -756* 6T SE * 6G / BSPP G BSPP 8767 H SE H SE *Light duty housing. See section J for housing details. 7 Voltage rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 8 Connector types G - ISO DIN 65 Q - Spade terminals W - Flying lead N - Deutsch Y - mp JR D - Metripack 5 male J - Metripack 8 male For coil dimensions see section C. 9 Special features - None (Only required if valve has Special features, omitted if.) Note: Use J series, W coils with this solenoid valve. Dimensions mm (inch) 9,6 (.6) Torque cartridge in aluminum housing 8-55 Nm (95-5 ft lbs) Installation drawings Note: When solenoid valve is ordered as, nut is included. Ø 8,9 (.5) 76.5 (.). (.6) 9, (.75) hex 76. (.).6 (.) X 8.7 (.) 6. (.) 76, (.). (.) 75. (.97).6 (.) 7,6 (.87) hex 57, (.5).65" Thd. Ø 6,5 (.7) Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

96 SV--O/OP/OS - Solenoid valve Poppet type, normally open solenoid valve 7 L/min (6 USgpm) 5 bar (5 psi) Operation In the de-energized position the valve allows free flow in both directions. When the solenoid is energized the pilot poppet closes the orifice and the valve closes blocking flow from port to while allowing free flow from port to. Features Hardened and ground working parts. Lapped seat for low leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low Pressure drop. 5 bar working pressure. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) Cartridge fatigue pressure (infinite life) Rated flow Internal leakage, port to port Temperature range Coil duty Fluids 5 bar (5 psi)* bar (5 psi) 7 L/min (6 USgpm) less than 5 drops/min 5 bar (5 psi) - to C (- to F) Continuous from 85% to % of nominal voltage C-- ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) Steel Weight,6 kg (.7 lbs) Seal kit (Buna-N), (Viton ) *For application pressure over 8 bar ( psi) consult factory Viton is a registered trademark of E.I. DuPont Description This is a -way, -position, poppet type, high pressure, pilot operated, normally open solenoid valve. This valve is used in applications requiring low leakage, such as load holding applications or as a general purpose diverter or dump valve. Pressure drop Pressure Drop - psi Flow - L/min (,8 cst 9 C) 8 6 B Pressure Drop - bar 5 6 Flow - USgpm (5 SUS F) - Port to port de-energized B - Port to port -96 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

97 Model code SV--O/OP/OS - Solenoid valve Poppet type, normally open solenoid valve 7 L/min (6 USgpm) 5 bar (5 psi) SV (V) O (*) (S) *** **** * H Function SV - Solenoid valve Size - size Seal material Blank - Buna-N V - Viton Style O - Normally open 5 Manual override option Blank - No manual override P - Push type S - Screw type For valve dimensions with manual override option installed see page Valve housing material Blank - S - Steel 7 Port size Code Port size Housing number 6G / BSPP -75 8G BSPP -75 T SE T SE See section J for housing details. 8 Voltage rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 9 Connector types G - ISO DIN 65 Q - Spade terminals W - Flying lead N - Deutsch Y - mp JR D - Metripack 5 male J - Metripack 8 male Coil series H - series, 9 W For coil part numbers and dimensions see section C. Special features - None (Only required if valve has Special features, omitted if.) Dimensions mm (inch) 9,6 (.6) Torque cartridge in steel housing 6-8 Nm (-5 ft lbs) Note: When solenoid valve is ordered as, nut is included. Installation drawing Ø 8,9 (.5), (.875) hex 6. (.5).7 (.5) 6, (.5) 76. (.) 88. (.5) X. (.).7 (.5) 57, (.5) 7,6 (.875) hex Ø 6,7 (.6).65" Thd..7 (.5) 76. (.).6 (.) Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

98 SV-8-O/OM - Solenoid valve Spool type, normally open solenoid valve L/min ( USgpm) bar ( psi) Operation In the de-energized position the valve is open in both directions. When the solenoid is energized the spool moves causing the valve to close in both directions. Features Hardened, ground and honed working parts to limit leakage. IP69 Tough coil compatibility. Continuously rated. Compact design with low Pressure drop. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) Cartridge fatigue pressure (infinite life) Rated flow Internal leakage Temperature range Coil duty Response times (% rated voltage and flow) Fluids bar ( psi) bar ( psi) L/min ( USgpm) 8 cm/min (5 in/min) bar ( psi) - to C (- to 8 F) Continuous from 85% to % of nominal voltage Energize: ms De-Energize: 8 ms C-8- ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) luminum Weight including coil,7 kg (.6 lbs) Seal kit (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way, -position, spool type, direct acting, normally open solenoid valve. This valve is used in applications where the flow needs to be blocked in both directions when the solenoid is energized. Pressure drop Pressure Drop - psi Flow - L/min (,8 cst 9 C) 6 8 Pressure Drop - bar Flow - USgpm (5 SUS F) Port to port de-energized Port to port de-energized -98 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

99 Model code SV-8-O/OM - Solenoid valve Spool type, normally open solenoid valve L/min ( USgpm) bar ( psi) SV 8 (V) O (M) (F) () ** **** * S Function SV - Solenoid valve Size 8-8 size Seal material Blank - Buna-N V - Viton Style O - Normally open 5 Manual override option Blank - No manual override M - Knob type For valve dimensions with manual override option installed see page Filter option Blank - None F - Filter screen 8 Port size Code Port size Housing number G / BSPP -677 G /8 BSPP -678 T SE -67 6T SE T SE 8-67 See section J for housing details. 9 Voltage rating - No coil D - VDC D - VDC 6D - 6VDC 7 Valve housing material Omit for - luminum - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. Connector types G - ISO DIN 65 Q - Spade terminals W - Flying lead N - Deutsch Y - mp JR D - Metripack 5 male J - Metripack 8 male Coil series S - 8 series, W For coil part numbers and dimensions see section C. Special features - None (Only required if valve has Special features, omitted if.) Dimensions mm (inch) 6, (.) Torque cartridge in steel or aluminum housing - Nm (5- ft lbs) Installation drawing Note: When solenoid valve is ordered as, nut is included. 9. (.75) Hex Ø,7 (.5) 5.8 (.). (.875) Hex 5.5 (.6) 9. (.75) 9, (.75) hex 8. (.5) 5.8 (.) X 7. (.8) 5,8 (.) 7,8 (.9), (.87) hex.75" 6 Thd. Ø,6 (.97). (.). (.7) 5.8 (.) Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

100 SV-8-O/OM - Solenoid valve Spool type, normally open solenoid valve L/min (.5 USgpm) 5 bar (5 psi) Operation In the de-energized position the valve is open in both directions. When the solenoid is energized the spool moves causing the valve to close in both directions. Features Hardened, ground and honed working parts to limit leakage. IP69 Tough coil compatibility. Continuously rated. Compact design with low pressure drop. 5 bar working pressure. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) 5 bar (5 psi) Cartridge fatigue pressure (infinite life) bar (5 psi) Rated flow L/min (.5 USgpm) Internal leakage, port to port cm/min (8.5 in/min) 5 bar (5 psi) Temperature range - to C (- to F) Coil duty Continuous from 85% to % of nominal voltage C-8- Fluids ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) Steel Weight, kg (.5 lbs) Seal kit (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way, -position, spool type, high pressure, direct acting, normally open solenoid valve. This valve is used in applications where the flow needs to be blocked in both directions when the solenoid is energized. Pressure drop Pressure Drop - psi Flow - L/min (,8 cst 9 C) 8 6 Pressure Drop - bar Flow - USgpm (5 SUS F) Port to port de-energized Port to port de-energized - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

101 Model code SV-8-O/OM - Solenoid valve Spool type, normally open solenoid valve L/min (.5 USgpm) 5 bar (5 psi) SV 8 (V) O (M) (S) ** **** * P Function SV - Solenoid valve Size 8-8 size Seal material Blank - Buna-N V - Viton 7 Port size Code Port size Housing number G / BSPP -67 G /8 BSPP -67 T SE T SE T SE See section J for housing details. 9 Connector types G - ISO DIN 65 Q - Spade terminals W - Flying lead N - Deutsch Y - mp JR D - Metripack 5 male J - Metripack 8 male Style O - Normally open 5 Manual override option Blank - No manual override M - Manual override For valve dimensions with manual override option installed see page Voltage rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. Coil series P - 8 series, W For coil part numbers and dimensions see section C. Special features - None (Only required if valve has special features, omitted if.) 6 Valve housing material Blank - S - Steel Dimensions mm (inch) Torque cartridge in steel or aluminum housing - Nm (5- ft lbs) Note: When solenoid valve is ordered as cartridge only, nut is included. 6, (.) Installation drawing 5.8 (.) Ø,7 (.5) 9, (.75) hex 5.8 (.) 8. (.5) 5.8 (.) X 7. (.8) 5.5 (.6) 9. (.75) 7,7 (.9), (.87) hex.75" 6 Thd. Ø,6 (.5). (.). (.7) 5.8 (.) Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 -

102 SV--O/OM/OR - Solenoid valve Spool type, normally open solenoid valve L/min (6 USgpm) bar ( psi) Operation In the de-energized position the valve is open in both directions. When the solenoid is energized the spool moves causing the valve to close in both directions. Features Hardened, ground and honed working parts to limit leakage. IP69 Tough coil compatibility. Continuously rated. Compact design with low pressure drop. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) Cartridge fatigue pressure (infinite life) Rated flow Internal leakage, port to port Temperature range Coil duty Fluids bar ( psi) bar ( psi) L/min (6 USgpm) 8 cm/min (5 in/min) bar ( psi) - to C (- to 8 F) Continuous from 85% to % of nominal voltage C-- ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) luminum Weight including cartridge, kg (.87 lbs) Seal kit (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way, -position, spool type, direct acting, normally open solenoid valve. This valve is used in applications where the flow needs to be blocked in both directions when the solenoid is energized. Pressure drop Pressure Drop - psi Flow - L/min (,8 cst 9 C) Pressure Drop - bar 6 Flow - USgpm (5 SUS F) Port to port or Port to port de-energized - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

103 Model code SV--O/OM/OR - Solenoid valve Spool type, normally open solenoid valve L/min (6 USgpm) bar ( psi) SV (V) O (*) (F) ** **** * Function SV - Solenoid valve Size - size Seal material Blank - Buna-N V - Viton Style O - Normally open 5 Manual override option Blank - No manual override M - Knob type R - Cable type For valve dimensions with manual override option installed see page Port size Code Port size Housing number B /8 BSPP -756* 6T SE * G / BSPP 8767 G /8 BSPP H SE H SE *Light duty housing. See section J for housing details. 8 Voltage rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 9 Connector types G - ISO DIN 65 Q - Spade terminals W - Flying lead N - Deutsch Y - mp JR D - Metripack 5 male J - Metripack 8 male For coil part numbers and dimensions see section C. Special features - None (Only required if valve has special features, omitted if.) Note: Use J series, W coils with this solenoid valve. 6 Filter option Blank - None F - Filter screen Dimensions mm (inch) 9,6 (.6) Torque cartridge in aluminum housing 7-5 Nm (5- ft lbs) Installation drawing Note: When solenoid valve is ordered as cartridge only, nut is included. Ø 8,9 (.5) 9, (.75) hex 57. (.5) 9. (.75) Hex 5. (.) Hex 5. (.) 57, (.5),7 (.5) 5, (.) hex.875" Thd. Ø 5,8 (.6) X 7. (.8) 9.5 (.7) 6.5 (.5).8 (.8) 6.5 (.5) 9. (.75) Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 -

104 SV--O/OM - Solenoid valve Spool type, normally open solenoid valve L/min (6 USgpm) 5 bar (5 psi) Operation In the de-energized position the valve is open in both directions. When the solenoid is energized the spool moves causing the valve to close in both directions. Features Hardened, ground and honed working parts to limit leakage. IP69 Tough coil compatibility. Continuously rated. Compact design with low pressure drop. 5 bar working pressure. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) 5 bar (5 psi) Cartridge fatigue pressure (infinite life) bar (5 psi) Rated flow L/min (6 USgpm) Internal leakage, port to port cm/min (8.5 in/min) 5 bar (5 psi) Temperature range - to C (- to F) Coil duty Continuous from 85% to % of nominal voltage C-- Fluids ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) Steel Weight cartridge only,8 kg (.9 lbs) Seal kit (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way, -position, spool type, high pressure, direct acting, normally open solenoid valve. This valve is used in applications where the flow needs to be blocked in both directions when the solenoid is energized. Pressure drop Pressure Drop - psi Flow - L/min (,8 cst 9 C) Pressure Drop - bar 6 Flow - USgpm (5 SUS F) Port to port or Port to port de-energized - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

105 Model code SV--O/OM - Solenoid valve Spool type, normally open solenoid valve L/min (6 USgpm) 5 bar (5 psi) SV (V) O (M) (S) ** **** * H Function SV - Solenoid valve Size - size Seal material Blank - Buna-N V - Viton Style O - Normally open 5 Manual override option Blank - No manual override M - Manual override For valve dimensions with manual override option installed see page Valve housing material Blank - S - Steel 7 Port size Code Port size Housing number G / BSPP -75 G /8 BSPP -75 6T SE T SE 8-75 See section J for housing details. 8 Voltage rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 9 Connector types G - ISO DIN 65 Q - Spade terminals W - Flying lead N - Deutsch Y - mp JR D - Metripack 5 male J - Metripack 8 male Coil series H - series, 9 W For coil part numbers and dimensions see section C. Special features - None (Only required if valve has special features, omitted if.) Dimensions mm (inch) Torque cartridge in steel housing Nm (5-55 ft lbs) 9,6 (.6) Note: When solenoid valve is ordered as cartridge only, nut is included. Installation drawing 57. (.5) Ø 8,9 (.5), (.875) hex 5.8 (.) 9. (.75). (.7) 57,8 (.8),7 (.5) 5, (.) hex.875" Thd. Ø 5,8 (.6) 6.5 (.5) 9.5 (.7) Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure..6 (.75) 6.5 (.5) X 7. (.8) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

106 SV-8-/M - Solenoid valve -way, -position spool type solenoid valve L/min ( USgpm) bar ( psi) Operation In the de-energized position this valve allows flow from port to while port is blocked. In the energized position flow is allowed from port to port while port is blocked. Features Hardened, ground and honed working parts to limit leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low pressure drop. Rated pressure on all ports. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) Cartridge fatigue pressure (infinite life) Rated flow Internal leakage (per land) Temperature range Coil duty Fluids bar ( psi) bar ( psi) L/min ( USgpm) 8 cm/min (5 in/min) bar ( psi) - to C (- to 8 F) Continuous from 85% to % of nominal voltage C-8- ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) luminum Weight including coil, kg (.66 lbs) Seal kit (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way -position, direct acting, spool type solenoid valve. This valve can be used in applications requiring separate pressure and tank lines, such as a single acting cylinder or any other application where a three way two position solenoid valve is needed. Pressure drop Pressure Drop - psi Flow - L/min (,8 cst 9 C) 8 8 Pressure Drop - bar Load pressure psi Flow - L/min (,8 cst 9 C) 8 6 B C Load pressure - bar Flow - USgpm (5 SUS F) 5 Flow - USgpm (5 SUS F) Pressure drop vs. Flow Operating Limits - Selector to B - Normally Open C - Normally closed and Selector to -6 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

107 Model code SV-8-/M - Solenoid valve -way, -position spool type solenoid valve L/min ( USgpm) bar ( psi) SV 8 (V) (M) () ** **** * S Function SV - Solenoid valve Size 8-8 size Seal material Blank - Buna-N V - Viton Style - -way, position 5 Manual override option Blank - No manual override M - Knob type For valve dimensions with manual override option installed see page Valve housing material Omit for - luminum 7 Port size Code Port size Housing number G / BSPP -679 G /8 BSPP -67 T SE -67 6T SE 6-67 See section J for housing details. 8 Voltage rating D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 9 Connector types G - ISO DIN 65 Q - Spade terminals W - Flying lead N - Deutsch Y - mp JR D - Metripack 5 male J - Metripack 8 male Coil series S - 8 series, W For coil part numbers and dimensions see section C. Special features - None (Only required if valve has special features, omitted if.) Dimensions mm (inch) 6, (.) Torque cartridge in steel or aluminum housing - Nm (5- ft lbs) Installation drawing Note: When solenoid valve is ordered as cartridge only, nut is included. Ø,7 (.5) 5,8 (.) 9, (.75) hex, (.87) hex 9. (.75) (.) (.6) 5 (.) 67. (.65). (.) 56.7 (.) 6.5 (.5) x7. (.8) 9.8 (.7) 9. (.75),7 (.6) Ø, (.559) Ø 5,8 (.6).75" 6 Thd. Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

108 SV-8-/M - Solenoid valve -way, -position spool type solenoid valve L/min ( USgpm) 5 bar (5 psi) Operation In the de-energized position this valve allows flow from port to while port is blocked. In the energized position flow is allowed from port to port while port is blocked. Features Hardened, ground and honed working parts to limit leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low pressure drop. Rated pressure on all ports. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) 5 bar (5 psi) Cartridge fatigue pressure (infinite life) bar (5 psi) Rated flow L/min ( USgpm) Internal leakage, combined port and port cm/min (8.5 in/min) 5 bar (5 psi) Temperature range - to C (- to F) Coil duty Continuous from 85% to % of nominal voltage C-8- Fluids ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) Steel Weight, kg (.8 lbs) Seal kit (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way -position, high pressure, direct acting, spool type solenoid valve. This valve can be used in applications requiring separate pressure and tank lines, such as a single acting cylinder or any other application where a three way two position solenoid valve is needed. Pressure drop Flow - L/min (,8 cst 9 C) Pressure Drop - psi B C 8 6 Pressure Drop - bar Pressure - psi Flow - L/min (,8 cst 9 C) B 7 Pressure - bar Flow - USgpm (5 SUS F) Pressure drop vs. Flow - Port to and to B - Port to C - Port to Flow - USgpm (5 SUS F) Operating Limits - Normally open & closed B - Selector to and to -8 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

109 Model code SV-8-/M - Solenoid valve -way, -position spool type solenoid valve L/min ( USgpm) 5 bar (5 psi) SV 8 (V) (M) (S) ** **** * P Function SV - Solenoid valve Size 8-8 size Seal material Blank - Buna-N V - Viton Style - -way, position 5 Manual override option Blank - No manual override M - Manual override For valve dimensions with manual override option installed see page Valve housing material Blank - S - Steel 7 Port size Code Port size Housing number G / BSPP -67 G /8 BSPP -67 T SE T SE See section J for housing details. 8 Voltage rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 9 Connector types G - ISO DIN 65 Q - Spade terminals W - Flying lead N - Deutsch Y - mp JR D - Metripack 5 male J - Metripack 8 male Coil series P - 8 series, W For coil part numbers and dimensions see section C. Special features - None (Only required if valve has special features, omitted if.) Dimensions mm (inch) Torque cartridge in steel or aluminum housing - Nm (5- ft lbs) 6, (.) Note: When solenoid valve is ordered as cartridge only, nut is included. Installation drawing Ø,7 (.5) 9, (.75) hex 9. (.75) 5.5 (.6) 5.8 (.) 9. (.75) 5.8 (.),6 (.6), (.87) hex Ø, (.559).75" 6 Thd. Ø 5,8 (.6) 5 (.) 66.7 (.6). (.) 56.7 (.) 6.5 (.5) x7. (.8) 9.8 (.7) Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

110 SV-8-/P - Solenoid valve -way, -position spool type solenoid valve L/min ( USgpm) bar ( psi) Operation In the de-energized position this valve allows flow from port to while port is blocked. In the energized position flow is allowed from port to port while port is blocked. Features Hardened, ground and honed working parts to limit leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low pressure drop. Rated pressure on all ports. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) bar ( psi) Cartridge fatigue pressure (infinite life) bar ( psi) Rated flow L/min ( USgpm) Internal leakage 8 cm/min (5 in/min) bar ( psi) Temperature range - to C (- to 8 F) Coil duty Continuous from 85% to % of nominal voltage Energize: ms Response times (% rated voltage and flow) De-Energize: 7 ms C-8- Fluids ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) luminum Weight including coil,9 kg (.6 lbs) Seal kit (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Note: Pressure on port should not exceed bar ( psi). Description This is a -way -position, direct acting, spool type solenoid valve. This valve can be used in applications requiring separate pressure and tank lines, such as a single acting cylinder or any other application where a three way two position solenoid valve is needed. Pressure drop Pressure Drop - psi Flow - L/min (,8 cst 9 C) 8 6 Pressure Drop - bar Load pressure - psi Flow - L/min (,8 cst 9 C) B 7 5 C Load pressure - bar 5 Flow - USgpm (5 SUS F) Flow - USgpm (5 SUS F) Pressure drop vs. Flow Operating Limits Port to and port to port - Normally open port to port B - Normally closed port to port C - Selector to and to - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

111 Model code SV-8-/P - Solenoid valve -way, -position spool type solenoid valve L/min ( USgpm) bar ( psi) SV 8 (V) (P) () ** **** * S Function SV - Solenoid valve Size 8-8 size Seal material Blank - Buna-N V - Viton Style - -way, position 5 Manual override option Blank - No manual override P - Push type For valve dimensions with manual override option installed see page Valve housing material Omit for cartridge only - luminum 7 Port size Code Port size Housing number G / BSPP -679 G /8 BSPP -67 T SE -67 6T SE 6-67 See section J for housing details. 8 Voltage rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 9 Connector types G - ISO DIN 65 Q - Spade terminals W - Flying lead N - Deutsch Y - mp JR D - Metripack 5 male J - Metripack 8 male Coil series S - 8 series, W For coil part numbers and dimensions see section C. Special features - None (Only required if valve has special features, omitted if.) Dimensions mm (inch) 6, (.) Torque cartridge in steel or aluminum housing - Nm (5- ft lbs) Installation drawing Note: When solenoid valve is ordered as cartridge only, nut is included. Ø,7 (.5) 9, (.75) hex 9. (.75) 5.5 (.6) 5 (.) 67. (.65) 5.8 (.). (.875) Hex x7. (.8) 9.8 (.7) 9. (.75) 5.8 (.). (.) 56.7 (.) 6.5 (.5) Ø 5,8 (.6),7 (.6), (.87) hex.75" 6 Thd. Ø, (.559) Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 -

112 S9 - Solenoid valve -way, -position poppet type solenoid valve Up to L/min (. USgpm) bar ( psi) (ct) (T) (P) Operation In the de-energized condition port is blocked and port is open to port. When energized port is open to port and port is blocked. Features High flow capacity with reduced space requirements. No dynamic seals. Standard valve bodies and common cavities. One-piece encapsulated coil with minimal amperage draw. Oil immersed armature solenoid. Various coil terminals and voltages. Manual override, seal variations and other options available. Sealed coil arrangement to protect stem from corrosion. Sectional view Performance data Ratings and specifications Figures based on Viscosity cst (5 SSU) ctuator port location Port Max working pressure bar ( psi) Rated flow See performance graphs Nominal flow at P = 5 bar (7 psi) L/min (.6 USgpm) Internal leakage Less than.6 ml/min ( dpm) Temperature range - to C (- to 8 F) 5 (see Section M) Electrical data See coil data sheet Torque cartridge into cavity Nm ( lbs ft) Mounting position Unrestricted Fluids ll general purpose hydraulics fluids such as:mil-h-566, SE, SE, etc Seal material Standard nitrile with PTFE back up rings Filtration BS55/ Class 8/ (5 micron or better) Nominal viscosity range 5 to 5 cst Standard housing materials luminium lloy Coil weight. kg (.6 lbs) Cartridge weight. kg (. lbs) Seal kit SK9 (Nitrile) SK9V (Viton ) Coil part number C6-*-*/9 Coil voltage available, VDC,,, VC* Viton is a registered trademark of E.I. DuPont *C coils must be used with a rectifying connector Description This valve is a position ported poppet solenoid operated diverter screw in cartridge valve. It is ideal for use in systems where low leakage is important. Pressure drop Flow - L/min Pressure - psi Flow - US gpm Pressure - bar Working pressure - psi Flow - L/min Flow - US gpm 7 Working pressure - bar - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

113 S9 - Solenoid valve -way, -position poppet type solenoid valve Up to L/min (. USgpm) bar ( psi) Model code S9 N * H W 5 6 Function S9 Seal material N - Nitrile V - Viton Manual Override - Screw - Push (Consult factory for availability). See page -96. Coil Termination H - DIN65 F - Flying lead DM - Deutsch moulded Other terminations available on request. 5 Voltage - VDC - VDC - VC - VC 6 Port size Code Port size Housing number - body only luminium W / BSP B77 W /8 BSP B668 6T /8 SE B656 Dimensions mm (inch) Basic Code S9 Installation drawing. (.8) 9. (.9) 5.5 (.) 57. (.5) 8. (.). (.).7 (.58) 7. (.8) 5. (.97) 8. (.5) 6.5 (.5). (.7). /F 9.55 (.8) / -6-UNF- 8.6 (.).8 (.9) 7.6 (.87) holes Ø7. (.8) thro.7 (.5 5. (.) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 -

114 S5(H) - Solenoid valve -way, -position spool type solenoid valve Up to L/min ( USgpm) bar ( psi) Operation In the de-energized position this valve allows flow from port to while port is blocked. In the energized position flow is allowed from port to port while port is blocked. Features Hardened, ground and honed working parts to limit leakage. Continuously rated. Compact design with low Pressure drop. Rated pressure on all ports. Sectional view Description This is a -way -position, direct acting, spool type solenoid valve. This valve can be used in applications requiring separate pressure and tank lines, such as a single acting cylinder or any other application where a three way two position solenoid valve is needed. Performance data Ratings and specifications Figures based on Viscosity cst (5 SSU) ctuator port location Port Max working pressure bar ( psi) Rated flow at P = 5 bar (7 psi) Up to L/min ( USgpm) Nominal flow L/min (6 USgpm) Internal leakage Less than ml/min past each land bar differential at centistokes Temperature range - to + C (- to +8 F) C-- (see Section M) Electrical data See coil data sheet Torque cartridge into cavity Nm ( lbs ft) Mounting position Unrestricted Fluids Most general purpose hydraulics fluids such as: MIL-H-566, SE, SE etc Seal material Standard nitrile with PTFE back up rings Filtration BS55/ Class 8/ (5 micron or better) Nominal viscosity range 5 to 5 cst Standard housing materials luminium alloy Coil weight. kg (.6 lbs) Cartridge weight. kg (. lbs) Seal kit SK (Nitrile) SKV (Viton ) Coil part number S5: C6-*-*/9 S5(H): C6-*-*/9 Coil voltage available, VDC,,, VC* Viton is a registered trademark of E.I. DuPont *C coils must be used with a rectifying connector Pressure drop Pressure - psi Flow - L/min Flow - US gpm Pressure - bar Working pressure - psi Selector Mode Flow - L/min S5H S Flow - US gpm 5 5 Working pressure - bar Working pressure - psi Normally closed and Normally open modes Flow - L/min Normally open Normally closed Flow - US gpm 5 5 Working pressure - bar - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

115 S5(H) - Solenoid valve -way, -position spool type solenoid valve Up to L/min ( USgpm) bar ( psi) Model code S5* N * H W 5 6 Function S5 - Standard valve S5(H ) - Heavy duty valve Seal material N - Nitrile V - Viton Manual Override - Screw (Consult factory for availability). See page -96. Coil Termination H - DIN65 F - Flying leads DM - Deutsch moulded Other terminations available on request. 5 Voltage - VDC - VDC - VC - VC 6 Port size Code Port size Housing number - body only luminium W /8 BSP B898 W / BSP B958 8T / SE B96 Dimensions mm (inch) Installation drawing. (.8) 9. (.9) 5.5 (.) 6.5 (.5).5 (.6) 8.5 (.7) 66. (.6) 6.7 (.8) 5. /F 7/8 -- UNF- 5. (.97) 8. (.) holes Ø7. (.8) thro.8 (.5) 6.5 (.5) 5. (.) 5.8 (.) 66.8 (.6) 6. (.6).8 (.5) Ø5.8 (.6) Ø7. (.69) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

116 S5(H) - Solenoid valve -way, -position spool type solenoid valve Up to L/min (.5 USgpm) Up to bar ( psi) Sectional view Operation In the de-energized position this valve allows flow from port to while port is blocked. In the energized position flow is allowed from port to port while port is blocked. Features High flow capacity with reduced space requirements. No dynamic seals. Standard valve bodies and common cavities. One-piece encapsulated coil with minimal amperage draw. Oil immersed armature solenoid. Various coil terminals and voltages. Coil interchangeability with Series S5 valves. Manual override, seal variations and other options available. Sealed coil arrangement to protect stem from corrosion. Performance data Description This is a -way -position, direct acting, spool type solenoid valve. This valve can be used in applications requiring separate pressure and tank lines, such as a single acting cylinder or any other application where a three way two position solenoid valve is needed. Pressure drop Ratings and specifications Figures based on Viscosity cst (5 SSU) ctuator port location Port Max working pressure bar ( psi) Rated flow See performance graphs Nominal flow at P = 5 bar (7 psi) 7 L/min Internal leakage Less than ml/min past each land bar differential Temperature range - to + C (- to +8 F) C-- (see Section M) Electrical data See coil data sheet Torque cartridge into cavity Nm ( lbs ft) Mounting position Unrestricted Fluids ll general purpose hydraulics fluids such as: MIL-H-566, SE, SE etc Seal material Standard nitrile with PTFE back up rings Filtration BS55/ Class 8/ (5 micron or better) Nominal viscosity range 5 to 5 cst Standard housing materials luminium alloy Coil Weight. kg (.6 lbs) Weight. kg (. lbs) Seal kit SK (Nitrile) SKV (Viton ) Coil part number C6-*-*/9 (55) C6-*-*/9(55H) Coil voltage available, VDC,,, VC* Viton is a registered trademark of E.I. DuPont *C coils must be used with a rectifying connector Performance Selector Mode Performance Normally closed and Normally open modes Pressure - psi Flow - L/min & & Flow - US gpm Pressure - bar Working pressure - psi Flow - L/min S5 S5H Flow - US gpm 5 5 Working pressure - bar Working pressure - psi Flow - L/min 65 Normally 5 closed S5H 9 Normally closed S Normally open S5(H) Flow - US gpm 5 Working pressure - bar -6 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

117 S5(H) - Solenoid valve -way, -position spool type solenoid valve Up to L/min (.5 USgpm) Up to bar ( psi) Model code S5* N * H W 5 6 Function S5 - Standard valve S5(H) - Heavy duty valve Seal material N - Nitrile V - Viton Manual Override - Screw (Consult factory for availability). See page -96. Coil Termination H - DIN65 F - Flying leads DM - Deutsch moulded Other terminations available on request. 5 Voltage - VDC - VDC - VC - VC 6 Port size Code Port size Housing number - body only luminium W /8 BSP B898 W / BSP B958 8T / SE B96 Dimensions mm (inch) Installation drawing. (.8) 9. (.9) 5.5 (.) 6.5 (.5) 66. (.6) 7. (.85) 5. (.97) 5. /F 8. (.) 7/8 --UNF-.5 (.6) holes Ø7. (.8) thro.8 (.5) 6.5 (.5) 5. (.) 5.8 (.) 8.5 (.7) 66.8 (.6) 6. (.6).8 (.5) Ø5.8 (.6) Ø7. (.68) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

118 S55(H) - Solenoid valve -way, -position spool type solenoid valve Up to L/min (8 USgpm) bar ( psi) Sectional view Operation In the de-energized position this valve allows flow from port to while port is blocked. In the energized position flow is allowed from port to port while port is blocked. Features High flow capacity with reduced space requirements. No dynamic seals. Standard valve bodies and common cavities. One-piece encapsulated coil with minimal amperage draw. Oil immersed armature solenoid. Various coil terminals and voltages. Coil interchangeability with Series S5 valves. Manual override, seal variations and other options available. Sealed coil arrangement to protect stem from corrosion. Performance data Description This is a -way -position, direct acting, spool type solenoid valve. This valve can be used in applications requiring separate pressure and tank lines, such as a single acting cylinder or any other application where a three way two position solenoid valve is needed. Ratings and specifications Performance data is typical based on Viscosity cst (5 SSU) ctuator port location Port Max working pressure bar ( psi) Rated flow See performance graphs Nominal flow at P = 5 bar (7 psi) 5 L/min (6.5 USgpm) Internal leakage Less than ml/min bar differential Temperature range - to C (- to 8 F) C-- (See Section M) Electrical data See coil data sheet Torque cartridge into cavity Nm ( lbs ft) Mounting position Unrestricted Fluids Most general purpose hydraulics fluids such as: MIL-H-566, SE, SE etc Seal material Standard nitrile with PTFE back up rings Filtration BS55/ Class 8/ (5 micron or better) Nominal viscosity range 5 to 5 cst Standard housing materials luminium alloy Coil weight. kg (.6 lbs) Cartridge weight. kg (. lbs) Seal kit SK (Nitrile) SKV (Viton ) Coil part number C6*-*/9 (55) C6*-*/9 (555H) Coil voltage available, VDC,,, VC* Viton is a registered trademark of E.I. DuPont *C coils must be used with a rectifying connector Pressure drop Flow - L/min 75 5 Pressure - psi Flow - US gpm Pressure - bar Performance S55 Flow - L/min 65 5 Normally open 9 Working pressure - psi Normally closed Selector Flow - US gpm 5 5 Working pressure - bar Performance S55H Flow - L/min 65 5 Normally open 9 Working pressure - psi Normally closed Selector Flow - US gpm 5 5 Working pressure - bar -8 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

119 S55(H) - Solenoid valve -way, -position spool type solenoid valve Up to L/min (8 USgpm) bar ( psi) Model code S55* N * H W 5 6 Function S55 - Standard valve S55H - Heavy duty valve Seal material N - Nitrile V - Viton Manual override - Screw (Consult factory for availability). See page -96. Coil Termination H - DIN65 F - Flying leads DM - Deutsch moulded Other terminations available on request. 5 Voltage - VDC - VDC - VC - VC 6 Port size Code Port size Housing number - body only luminium W /8 BSP B898 W / BSP B958 8T / SE B96 Dimensions mm (inch) Installation drawing. (.8) 9. (.9) 5.5 (.) 6.5 (.5).5 (.6) 8.5 (.7) 66. (.6) 6.7 (.8) 5. /F 7/8 -- UNF- 5. (.97) 8. (.) holes Ø7. (.8) thro.8 (.5) 6.5 (.5) 5. (.) 5.8 (.) 66.8 (.6) 6. (.6).8 (.5) Ø5.8 (.6) Ø7. (.69) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

120 S56 - Solenoid valve -way, -position spool type solenoid valve Up to 5 L/min (9 USgpm) bar ( psi) (T) Operation In the de-energized condition all ports are closed. When energized all ports are open to each other. Features High flow capacity with reduced space requirements. No dynamic seals. Standard valve bodies and common cavities. One-piece encapsulated coil with minimal amperage draw. Oil immersed armature solenoid. Various coil terminals and voltages. Coil interchangeability with Series S5 valves. Manual override, seal variations and other options available. Sealed coil arrangement to protect stem from corrosion. Sectional view Performance data (Tank) Ratings and specifications Performance data is typical with Viscosity cst (5 SSU) Max working pressure bar ( psi) Rated flow See performance graphs Nominal flow at P = 5 bar (7 psi) L/min ( USgpm) Internal leakage Less than ml/min past each land bar differential Temperature range - to + C (- to +8 F) C-- (see Section M) Electrical data See coil data sheet Torque cartridge into cavity Nm ( lbs ft) Mounting position Unrestricted Fluids ll general purpose hydraulics fluids such as MIL-H-566, SE, SE etc Seal material Standard nitrile with PTFE back up rings Filtration BS55/ Class 8/ (5 micron or better) Nominal viscosity range 5 to 5 cst Standard housing materials luminium alloy Coil weight. kg (.6 lbs) Cartridge weight. kg (. lbs) Seal kit SK (Nitrile) SKV (Viton ) Coil part number C6-*-*/9 Coil voltage available, VDC,,, VC* Viton is a registered trademark of E.I. DuPont *C coils must be used with a rectifying connector Description This valve is a position ported solenoid operated screw in cartridge valve suitable as a float valve connecting all ports together when energized. Pressure drop Pressure - psi Flow - L/min & - ll other flow paths Flow - US gpm Pressure - bar Working pressure - psi Flow - L/min 65-5 & & Flow - US gpm Working pressure - bar - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

121 S56 - Solenoid valve -way, -position spool type solenoid valve Up to 5 L/min (9 USgpm) bar ( psi) Model code S56 N * H W 5 6 Function S56 Seal material N - Nitrile V - Viton Manual override - Screw (Consult factory for availability). See page -96 Coil Termination H - DIN65 F - Flying leads DM - Deutsch moulded Other terminations available on request. 5 Voltage - VDC - VDC - VC - VC 6 Port size Code Port size Housing number - body only luminium W /8 BSP B898 W / BSP B958 8T / SE B96 Dimensions mm (inch) Installation drawing. (.8) 9. (.9) 5.5 (.) 6.5 (.5).5 (.6) 8.5 (.7) 66. (.6) 6.7 (.8) 5. /F 7/8 -- UNF- 5. (.97) 8. (.) holes Ø7. (.8) thro.8 (.5) 6.5 (.5) 5. (.) 5.8 (.) 66.8 (.6) 6. (.6).8 (.5) Ø5.8 (.6) Ø7. (.69) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 -

122 SV--/M/R - Solenoid valve -way, -position, spool type solenoid valve Up to L/min (6 USgpm) bar ( psi) Operation In the de-energized position this valve allows flow from port to while port is blocked. In the energized position flow is allowed from port to port while port is blocked. Features Hardened, ground and honed working parts to limit leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low Pressure drop. Rated pressure on all ports. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) bar ( psi) Cartridge fatigue pressure (infinite life) bar ( psi) Rated flow L/min (6 USgpm) Max. flow port to -L/min (.5 USgpm) Internal leakage 6 cm /min ( in /min) bar ( psi) Temperature range - to C (- to 8 F) Coil duty Continuous from 85% to % of normal voltage C-- Fluids ll general purpose hydraulics fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) luminum Weight including coil, kg (.9 lbs) Seal kit 8896 (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way -position, direct acting, spool type solenoid valve. This valve can be used in applications requiring separate pressure and tank lines, such as a single acting cylinder or any other application where a three way two position solenoid valve is needed. Pressure drop Flow - L/min (,8 cst 9 C) Pressure Drop - psi B Pressure Drop - bar Flow - USgpm (5 SUS F) - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

123 Model code SV--/M/R - Solenoid valve -way, -position, spool type solenoid valve Up to L/min (6 USgpm) bar ( psi) SV (V) (*) ** **** * Function SV - Solenoid valve Size - size Seal material Blank - Buna-N V - Viton Style - -way, position 5 Manual override option Blank - No manual override M - Knob type R - Cable type For valve dimensions with Manual override option installed see page Port size 8 Connector types Code Port size Housing number G - ISO DIN 65 Q - Spade terminals B /8 BSPP -758* W - Flying lead 6T SE6 5666* N - Deutsch G / BSPP Y - mp JR G /8 BSPP 8767 D - Metripack 5 male 6H SE H SE J - Metripack 8 male *Light duty housing See section J for housings. For coil dimensions see section C. 7 Voltage rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode 9 Special features - None (Only required if valve has Special features, omitted if.) Note: Use J series, W coils with this solenoid valve. Dimensions mm (inch) 9,6 (.6) Torque cartridge in aluminum housing 7-5 Nm (5- ft lbs). Installation drawing (luminum) Note: When solenoid valve is ordered as, coil nut is included. Ø 8,9 (.5),6 (.97) 57. (.5) 5, (.) 57, (.5) 9, (.75) hex 8,8 (.7) 5 (.97) 57. (.5) 9.5 (.8) 57.5 (.5) 75. (.97) X7, (.8),8 (.7) 75, (.97) 5, (.) hex.875" Thd. 6, (.8) Ø 5,8 (.6) Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Ø 7, (.685) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 -

124 SV--/M - Solenoid valve -way, -position, spool type solenoid valve Up to L/min (6 USgpm) 5 bar (5 psi) Operation In the de-energized position this valve allows flow from port to while port is blocked. In the energized position flow is allowed from port to port while port is blocked. Features Hardened, ground and honed working parts to limit leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low Pressure drop. Rated pressure on all ports. Working pressure 5 bar. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical pplication pressure (all ports) 5 bar (5 psi) Cartridge fatigue pressure (infinite life) bar (5 psi) Rated Flow L/min (6 USgpm) Internal leakage, port to port 6 cm /min ( in /min) max at 5 bar (5 psi) Temperature range - to C (- to F) Coil Duty Continuous from 85% to % of nominal voltage C-- Fluids ll general purpose hydraulics fluids such as: MIL-H-566, SE, SE, etc. Filtration Cleanliness code 8/6/ Housing material (standard) Steel Weight,9 kg (. lbs) Seal kit 8896 (Buna-N) (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way -position, high pressure, direct acting, spool type solenoid valve. This valve can be used in applications requiring separate pressure and tank lines, such as a single acting cylinder or any other application where a three way two position solenoid valve is needed. Pressure drop Pressure Drop - psi Flow - L/min (,8 cst 9 C) B 5 5 Pressure Drop - bar Pressure - psi Flow - L/min (,8 cst 9 C) B 7 Pressure - bar Flow - USgpm (5 SUS F) Flow - USgpm (5 SUS F) Pressure drop vs. Flow - Port to port B - Port to port Operating limits - Normally open, normally closed B - Selector to - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

125 Model code SV--/M - Solenoid valve -way, -position, spool type solenoid valve Up to L/min (6 USgpm) 5 bar (5 psi) SV (V) (M) (S) ** **** * H Function SV - Solenoid valve Size - size Seal material Blank - Buna-N V - Viton Style - way, position 5 Manual override option Blank - No manual override M - Manual overrride For valve dimensions with Manual override option installed see page Port size 9 Connector types Code Port size Housing number G - ISO DIN 65 Q - Spade terminals G / BSPP -757 W - Flying lead G /8 BSPP -758 N - Deutsch 6T SE 6-75 Y - mp JR 8T SE D - Metripack 5 male See section J for housing details. J - Metripack 8 male 8 Voltage rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode Coil series H - series, 9 W For coil dimensions see section C. Special features - None (Only required if valve has Special features, omitted if.) 6 Valve housing material Blank - S - Steel Dimensions mm (inch) Torque cartridge in steel housing Nm (5-55 ft. lbs) 9,6 (.6) Note: For applications above bar please consult our technical department or use the steel body option. Installation drawing Ø 8,9 (.5), (.875) hex. (.87) 57. (.5). (.87) 57,8 (.8) 6, (.8) 5, (.) hex.875" Thd. Ø 5,8 (.6) Ø 7, (.686) 9. (.75). (.75) 6. (.5) 9.5 (.8) 57.5 (.5) 76. () X7, (.8) 5. (.9) 76. () Warning Maintain 5-8 Nm (-6 ft. lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

126 SV/B-- - Solenoid valve -way, -position, spool type solenoid valve Up to L/min (6 USgpm) 5 bar (5 psi) Operation In the de-energized position this valve allows flow from port to while port is blocked. In the energized position flow is allowed from port to port while port is blocked. Features Hardened, ground and honed working parts to limit leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low Pressure drop. Rated pressure on all ports. Working pressure 5 bar. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports except port ) 5 bar (5 psi) Typical application pressure at port bar ( psi) Cartridge fatigue pressure (infinite life) 5 bar (5 psi) Rated flow SV-- SVB-- 7 L/min (5 USgpm) L/min (6 USgpm) Internal leakage 5 cc/min ( bar ( psi) Temperature range - to C (- to 8 F) Coil duty Continuos from 85% to % of nominal voltage C-- Fluids MIL-H-566, SE, SE, etc. Filtration Cleanliness code 8/6/ Standard housing materials Steel Weight including coil SV--. kg (.9 lbs) SVB-- Seal kit Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way -position, high pressure, direct acting, spool type solenoid valve. This valve can be used in applications requiring separate pressure and tank lines, such as a single acting cylinder or any other application where a three way two position solenoid valve is needed. Pressure drop Pressure Drop - psi Flow - L/min B Flow - USgpm - Port to port Pressure drop vs. Flow - Port to port B - Port to port Pressure Drop - bar -6 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

127 Model code SV/B-- - Solenoid valve -way, -position, spool type solenoid valve Up to L/min (6 USgpm) 5 bar (5 psi) SV * * P **** **** * * ** ** Function SV - Solenoid valve Max flow - 7 L/min (5 USgpm) B - L/min (6 USgpm) Size - Size Seal material Blank - Buna-N V - Viton 6 Port size 8 Connector types Code Port size Housing number G - ISO DIN 65 W - Flying lead C - Deutch on Leads H - Metripak 5 on Leads F - Weatherpak Male on Leads For coil dimensions see section C. luminium Steel G / BSPP G /8 BSPP H SE H SE SG / BSPP -757 SG / BSPP -758 S6T SE 6-75 S8T SE See section J for housing details. 9 Coil types L - L series, (W EN 9) used for SV R - R series, (W) used for SVB- 5 Syle P - way push type manual overrride For valve dimensions with Manual override option installed see page Voltage rating - No coil D - VDC D - VDC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode Coil special features - No special feature Special features - None (Only required if valve has Special features, omitted if.) Dimensions mm (inch) Torque cartridge in aluminum housing 7-5 Nm (5- ft. lbs) Torque cartridge in steel housing Nm (5-55 ft. lbs) Note: When solenoid vale is ordered as, coil nut is included. Installation drawing (Steel) 8.7 [.9] 8.9 (.) 87.5 [.] 6 [.8].5 [.7] 5. [.] HEX. 7/8 - UNF - THD. 8.7 (.) 5. (.) 8 (.5) 76. (.5) 88.9 (.5) 5.6 (.) 8.55 (.5) 5. (.) [ ] [.6 -.6] Warning luminum housings can be used for pressures up to bar ( psi). Steel housings must be used for operating pressures above bar ( psi). Warning Maintain.5- Nm (.8-. ft. lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

128 SV--/P/S - Solenoid valve -way, -position spool type solenoid valve Up to L/min (6 USgpm) bar ( psi) Operation In the de-energized position this valve allows flow from port to while port is blocked. In the energized position flow is allowed from port to port while port is blocked. Features Hardened, ground and honed working parts to limit leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low Pressure drop. Rated pressure on all ports. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure bar ( psi)* *Flow from P to P must be less than 7,6 L/min ( USgpm) Cartridge fatigue pressure (infinite life) bar ( psi) Rated flow L/min (6 USgpm) Max. flow port to port - L/min (.5 USgpm) Internal leakage 6 cm /min ( in /min) bar ( psi) Temperature range - to C (- to 8 F) Coil duty Continuous from 85% to % of nominal voltage C-- Fluids ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) luminum Weight including coil, kg (.9 lbs) Seal kit 8896 (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way -position, direct acting, spool type solenoid valve. This valve can be used in applications requiring separate pressure and tank lines, such as a single acting cylinder or any other application where a three way two position solenoid valve is needed. Pressure drop Pressure Drop - psi Flow - L/min (,8 cst 9 C) 5 5 B 6 5 Pressure Drop - bar 5 6 Flow - USgpm (5 SUS F) - Port to port energized B - Port to port de-energized -8 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

129 Model code SV--/P/S - Solenoid valve -way, -position spool type solenoid valve Up to L/min (6 USgpm) bar ( psi) SV (V) (*) ** **** * Function SV - Solenoid valve Size - size Seal material Blank - Buna-N V - Viton Style - -way, position 5 Manual override option Blank - No manual override M - Manual override P - Push type S - Screw type For valve dimensions with Manual override option installed see page Port size 8 Connector types Code Port size Housing number G - ISO DIN 65 Q - Spade terminals B /8 BSPP -758* W - Flying lead 6T SE6 5666* N - Deutsch G / BSPP Y - mp JR G /8 BSPP 8767 D - Metripack 5 male 6H SE H SE J - Metripack 8 male *Light duty housing. See section J for housings. For coil dimensions see section C. 7 Voltage rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 9 Special features - None (Only required if valve has Special features, omitted if. ) Note: Use J series, W coils with this solenoid valve. Dimensions mm (inch) Torque cartridge in aluminum housing 7-5 Nm (5- ft lbs) Note: When solenoid valve is ordered as, coil nut is included. Ø 8,9 (.5) 9,6 (.6) Push type manual override Installation drawing,6 (.97) 6. (.) 8. (.5) 9. (.75) Hex 5. (.) Hex 5. (.) 76, (.) 9, (.75) hex 5, (.) hex 8,8 (.7) 5 (.97) 57. (.5) 9.5 (.8) 57,5 (.5) 75, (.97) X7, (.8),8 (.7) 75, (.97).875" Thd. Ø 5,8 (.6) Ø 7, (.685) 6, (.8) Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Warning Flow from port to port must be less than 7,6 L/min ( USgpm). Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

130 SVM-- - Solenoid valve -way, -position spool type solenoid valve Up to L/min (9 USgpm) bar ( psi) Operation In the de-energized position this valve allows flow from port to while port is blocked. In the energized position flow is allowed from port to port while port is blocked. Features Hardened, ground and honed working parts to limit leakage. IP69K Large ToughCoil compatibility. Continuously rated. Compact design with low Pressure drop. Rated pressure on all ports. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure bar ( psi) Cartridge fatigue pressure (infinite life) bar ( psi) Rated flow L/min ( USgpm) Max flow port to port - L/min (9 USgpm) Internal leakage cm /min (.5 in /min) bar ( psi) Temperature range - to C (- to 8 F) Coil duty Continuous from 85% to % of nominal voltage C-- Fluids ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) luminum Weight including coil,86 kg (.9 lbs) Seal kit 997- (Buna-N), 997- (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way -position, direct acting, spool type solenoid valve. This valve can be used in applications requiring separate pressure and tank lines, such as a single acting cylinder or any other application where a three way two position solenoid valve is needed. Pressure drop Flow - L/min Pressure Drop - psi Flow - USgpm B Pressure Drop - bar - Port to port energized B - Port to port de-energized - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

131 Model code SVM-- - Solenoid valve -way, -position spool type solenoid valve Up to L/min (9 USgpm) bar ( psi) SV * * P **** **** * * ** ** Function SV - Solenoid valve Max flow M - L/min ( USgpm) Size - size Seal material Blank - Buna-N V - Viton 5 Style P - way, push type manual override 6 Port size Code Port size Housing number 6G / BSPP -686 H SE Voltage rating - No coil D - VDC D - VDC B - VDC/w diode* B - VDC/w diode* 8 Connector types W - Flying lead N - Deutsch male, DT-P, integrated For coil dimensions see section C. 9 Coil types R - R series (W) Large ToughCoil Coil special features - No special feature Special features - None (Only required if valve has Special features, omitted if.) SF - Soft shift Dimensions mm (inch) Torque cartridge in aluminum housing 8-95 Nm (6-7 ft lbs) Installation drawing Note: When solenoid valve is ordered as, coil nut is included. 8,7 (.9) 5, (.98) 8.9 (.),5 (.7) 5,9 (.8) Torque -6 LB-IN MNUL OVERDRIVE 8,9 (.) Torque -6 LB-IN MNUL OVERDRIVE 85, (.6) 8.7 (.) 5. (.) 8 (.5) 76. (.5) 88.9 (.5) 5.6 (.) 8.55 (.5) 5. (.).5 HEX.5 HEX.6 - Thread SV--,8 (.9) 67,8 (.67), (.87) SVB-- Warning Maintain.5- Nm (.8-. ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 -

132 SVM-- - Solenoid valve -way, -position spool type solenoid valve Up to L/min ( USgpm) 5 bar (5 psi) Sectional view Operation In the de-energized position this valve allows flow from port to while port is blocked. Performance data In the energized position flow is allowed from port to port while port is blocked. Features Hardened, ground and honed working parts to limit leakage. IP69K Large ToughCoil compatibility. Continuously rated. Compact design with low Pressure drop. Rated pressure on all ports. Working pressure 5 bar. Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports except port ) 5 bar (5 psi) Typical application pressure at port bar ( psi) Cartridge fatigue pressure (infinite life) 5 bar (5 psi) Rated flow L/min ( USgpm) Max. flow port to port - L/min (9 USgpm) Internal leakage 5 cc/min (.5 bar ( psi) Temperature range - to C (- to 8 F) Coil duty Continuos from 85% to % of nominal voltage C-- Fluids ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE, etc. Filtration Cleanliness code 8/6/ Standard housing materials Steel Weight including coil.86 kg (.9 lbs) Seal kit 997- Buna-N), 997- (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way -position, high pressure, direct acting, spool type solenoid valve. This valve can be used in applications requiring separate pressure and tank lines, such as a single acting cylinder or any other application where a three way two position solenoid valve is needed. Pressure drop Pressure Drop - psi Flow - L/min B Flow - USgpm Pressure Drop - bar - Port to port energized B - Port to port de-energized - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

133 Model code SVM-- - Solenoid valve -way, -position spool type solenoid valve Up to L/min ( USgpm) 5 bar (5 psi) SV * * P **** **** * * ** ** Function SV - Solenoid valve Max flow M - L/min ( USgpm) Size - size Seal material Blank - Buna-N V - Viton 5 Style P - way, push type manual override 6 Port size - Code Port size Housing number luminium Steel 6G / BSPP -686 H SE -666 SG / BSPP S6G / BSPP -698 ST SE -67 ST SE Voltage rating - No coil D - VDC D - VDC B - VDC/w diode* B - VDC/w diode* 8 Connector types W - Flying lead N - Deutsch male, DT-P, integrated For coil dimensions see section C. 9 Coil types R - R series (W) Large ToughCoil Coil special features - No special feature Special features - None (Only required if valve has Special features, omitted if.) SF - Soft shift Dimensions mm (inch) Torque cartridge in aluminum housing 8-95 Nm (6-7 ft. lbs) Torque cartridge in steel housing -5 Nm (75-85 ft. lbs) Note: When solenoid vale is ordered as, coil nut is included. Installation drawing (Steel) 8,7 (.9) 5, (.98) 8.9 (.),5 (.7) 5,9 (.8) Torque -6 LB-IN MNUL OVERDRIVE 8,9 (.) Torque -6 LB-IN MNUL OVERDRIVE 85, (.6) 8.7 (.) 5. (.) 8 (.5) 76. (.5) 88.9 (.5) 5.6 (.) 8.55 (.5) 5. (.).5 HEX.6 - Thread SV--,8 (.9) 67,8 (.67), (.87).5 HEX SVB-- Warning Maintain.5- Nm (.8-. ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Warning luminum housings can be used for pressures up to bar ( psi). Steel housings must be used for operating pressures above bar ( psi). Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 -

134 SVM--P - Solenoid valve -way, -position, spool type solenoid valve Up to L/min (9 USgpm) bar ( psi) Operation In the de-energized position this valve allows flow from port to while port is blocked. In the energized position flow is allowed from port to port while port is blocked. Features Hardened, ground and honed working parts to limit leakage. IP69K Large ToughCoil compatibility. Continuously rated. Compact design with low Pressure drop. Rated pressure on all ports. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure bar ( psi) Cartridge fatigue pressure (infinite life) bar ( psi) Rated flow 8 L/min ( USgpm) Max flow port to port - L/min (9 USgpm) Internal leakage cm /min (.5 in /min) bar ( psi) Temperature range - to C (- to 8 F) Coil duty Continuous from 85% to % of nominal voltage C-- Fluids ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE, etc. Filtration Cleanliness code 8/6/ Housing material (standard) luminum Weight including coil,86 kg (.9 lbs) Seal kit 997- (Buna-N), 997- (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way -position, direct acting, spool type solenoid valve. This valve can be used in applications requiring separate pressure and tank lines, such as a single acting cylinder or any other application where a three way two position solenoid valve is needed. Pressure drop Pressure Drop - psi Flow - L/min B Flow - USgpm Pressure Drop - bar - Port to port energized B - Port to port de-energized - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

135 Model code SVM--P - Solenoid valve -way, -position, spool type solenoid valve Up to L/min (9 USgpm) bar ( psi) SV * * P **** **** * * ** ** Function SV - Solenoid valve Max flow M - 8 L/min ( USgpm) Size - size Seal material Blank - Buna-N V - Viton 5 Style P - way, push type manual override Dimensions mm (inch) 6 Port size Code Port size Housing number 6G / BSPP -686 H SE Voltage rating - No coil D - VDC D - VDC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 8 Connector types W - Flying lead N - Deutsch male, DT-P, integrated For coil dimensions see section C. Torque cartridge in aluminum housing 8-95 Nm (6-7 ft lbs) 9 Coil types R - R series (W) Large ToughCoil Coil special features - No special feature Special features - None (Only required if valve has Special features, omitted if.) SF - Soft shift Note: When solenoid valve is ordered as, coil nut is included. Installation drawing 8,7 (.9) 5, (.98) 8.9 (.),5 (.7) 5,9 (.8) Torque -6 LB-IN MNUL OVERDRIVE Torque -6 LB-IN 8,9 (.) MNUL OVERDRIVE 85, (.6) 8.7 (.) 5. (.) 8 (.5) 76. (.5) 88.9 (.5) 5.6 (.) 8.55 (.5) 5. (.).5 HEX.6 - Thread SV--,8 (.9) 67,8 (.67), (.87).5 HEX SVB-- Warning Maintain.5- Nm (.8-. ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

136 SVM-- - Solenoid valve -way, -position, spool type solenoid valve Up to L/min (9 USgpm) 5 bar (5 psi) Operation In the de-energized position this valve allows flow from port to while port is blocked. In the energized position flow is allowed from port to port while port is blocked. Features Hardened, ground and honed working parts to limit leakage. IP69K Large ToughCoil compatibility. Continuously rated. Compact design with low Pressure drop. Rated pressure on all ports. Working pressure 5 bar. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports except port ) 5 bar (5 psi) Typical application pressure at port bar ( psi) Cartridge fatigue pressure (infinite life) 5 bar (5 psi) Rated flow 8 L/min ( USgpm) Max. flow port to port - L/min (9 USgpm) Internal leakage 5 cc/min (.5 in bar ( psi) Temperature range - to C (- to 8 F) Coil duty Continuos from 85% to % of nominal voltage C-- Fluids ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE, etc. Filtration Cleanliness code 8/6/ Standard housing materials Steel Weight including coil.86 kg (.9 lbs) Seal kit 997- Buna-N), 997- (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way -position, high pressure, direct acting, spool type solenoid valve. This valve can be used in applications requiring separate pressure and tank lines, such as a single acting cylinder or any other application where a three way two position solenoid valve is needed. Pressure drop Pressure Drop - psi 8 6 Flow - L/min Pressure Drop - bar B Flow - USgpm - Port to port energized B - Port to port de-energized -6 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

137 Model code SVM-- - Solenoid valve -way, -position, spool type solenoid valve Up to L/min (9 USgpm) 5 bar (5 psi) SV * * P **** **** * * ** ** Function SV - Solenoid valve Max flow M - 8 L/min ( USgpm) Size - size Seal material Blank - Buna-N V - Viton 5 Style P - way, push type manual override 6 Port size - Code Port size Housing number luminium Steel 6G / BSPP -686 H SE -666 SG / BSPP S6G / BSPP -698 ST SE -67 ST SE Voltage rating - No coil D - VDC D - VDC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 8 Connector types W - Flying lead N - Deutsch male, DT-P, integrated For coil dimensions see section C. 9 Coil types R - R series (W) Large ToughCoil Coil special features - No special feature Special features - None (Only required if valve has Special features, omitted if.) Dimensions mm (inch) Torque cartridge in aluminum housing 8-95 Nm (6-7 ft. lbs) Torque cartridge in steel housing -5 Nm (75-85 ft. lbs) Note: When solenoid vale is ordered as, coil nut is included. Installation drawing (Steel) 8,7 (.9) 5, (.98) 8.9 (.),5 (.7) 5,9 (.8) Torque -6 LB-IN MNUL OVERDRIVE Torque -6 LB-IN 8,9 (.) MNUL OVERDRIVE 85, (.6) 8.7 (.) 5. (.) 8 (.5) 76. (.5) 88.9 (.5) 5.6 (.) 8.55 (.5) 5. (.).5 HEX.5 HEX.6 - Thread SV--,8 (.9) 67,8 (.67), (.87) SVB-- Warning Maintain.5- Nm (.8-. ft. lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Warning luminum housings can be used for pressures up to bar ( psi). Steel housings must be used for operating pressures above bar ( psi). Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

138 SVM--P - Solenoid valve -way, -position spool type solenoid valve Up to L/min ( USgpm) bar ( psi) Operation In the de-energized position this valve allows flow from port to while port is blocked. In the energized position flow is allowed from port to port while port is blocked. Features Hardened, ground and honed working parts to limit leakage. IP69K Large ToughCoil compatibility. Continuously rated. Compact design with low Pressure drop. Rated pressure on all ports. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure bar ( psi) Cartridge fatigue pressure (infinite life) bar ( psi) Rated flow L/min ( USgpm) Internal leakage cm /min (.5 in /min) bar ( psi) Temperature range - to C (- to 8 F) Coil duty Continuous from 85% to % of nominal voltage C-- Fluids ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE, etc. Filtration Cleanliness code 8/6/ Housing material (standard) luminum Weight including coil,86 kg (.9 lbs) Seal kit 997- (Buna-N), 997- (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way -position, direct acting, spool type solenoid valve. This valve can be used in applications requiring separate pressure and tank lines, such as a single acting cylinder or any other application where a three way two position solenoid valve is needed. Pressure drop Pressure Drop - psi Flow - L/min B Flow - USgpm Pressure Drop - bar - Port to port energized B - Port to port de-energized -8 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

139 Model code SVM--P - Solenoid valve -way, -position spool type solenoid valve Up to L/min ( USgpm) bar ( psi) SV * * P **** **** * * ** ** Function SV - Solenoid valve Max flow M - L/min ( USgpm) Size - size Seal material Blank - Buna-N V - Viton 5 Style P - way, push type manual override 6 Port size Code Port size Housing number 6G / BSPP -686 H SE Voltage rating - No coil D - VDC D - VDC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 8 Connector types W - Flying lead N - Deutsch male, DT-P, integrated For coil dimensions see section C. 9 Coil types R - R series (W) Large ToughCoil Coil special features - No special feature Special features - None (Only required if valve has Special features, omitted if.) SF - Soft shift Dimensions mm (inch) Torque cartridge in aluminum housing 8-95 Nm (6-7 ft lbs) Installation drawing Note: When solenoid valve is ordered as, coil nut is included. 8,7 (.9) 5, (.98) 8.8 (.).7 (.5) Hex,5 (.7) 5,9 (.8) Torque -6 LB-IN MNUL OVERDRIVE Torque -6 LB-IN 8,9 (.) MNUL OVERDRIVE 85, (.6) 8.7 (.) 5. (.) 8 (.5) 76. (.5) 88.9 (.5) XØ. (.6) 5.6 (.) 8.55 (.5) 5. (.).5 HEX.5 HEX.6 - Thread SV--,8 (.9) 67,8 (.67), (.87) SVB-- Warning Maintain.5- Nm (.8-. ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

140 SVM-- - Solenoid valve -way, -position spool type solenoid valve Up to L/min ( USgpm) 5 bar (5 psi) Operation In the de-energized position this valve allows flow from port to while port is blocked. In the energized position flow is allowed from port to port while port is blocked. Features Hardened, ground and honed working parts to limit leakage. IP69K Large ToughCoil compatibility. Continuously rated. Compact design with low Pressure drop. Rated pressure on all ports. Working pressure 5 bar. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports except port ) 5 bar (5 psi) Typical application pressure at port bar ( psi) Cartridge fatigue pressure (infinite life) 5 bar (5 psi) Rated flow L/min ( USgpm) Internal leakage 5 cc/min (.5 bar ( psi) Temperature range - to C (- to 8 F) Coil duty Continuos from 85% to % of nominal voltage C-- Fluids ll general purpose hydraulic fluids such as MIL-H-566, SE, SE, etc. Filtration Cleanliness code 8/6/ Standard housing materials Steel Weight including coil.86 kg (.9 lbs) Seal kit 997- Buna-N), 997- (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way -position, high pressure, direct acting, spool type solenoid valve. This valve can be used in applications requiring separate pressure and tank lines, such as a single acting cylinder or any other application where a three way two position solenoid valve is needed. Pressure drop Pressure Drop - psi Flow - L/min B Flow - USgpm - Port to port energized B - Port to port de-energized Pressure Drop - bar - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

141 Model code SV/B-- - Solenoid valve -way, -position spool type solenoid valve Up to L/min ( USgpm) 5 bar (5 psi) SV * * P **** **** * * ** ** Function SV - Solenoid valve Max flow M - L/min ( USgpm) Size - size Seal material Blank - Buna-N V - Viton 5 Style P - way, push type manual override 6 Port size - Code Port size Housing number luminium Steel 6G / BSPP -686 H SE -666 SG / BSPP S6G / BSPP -698 ST SE -67 ST SE Voltage rating - No coil D - VDC D - VDC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 8 Connector types W - Flying lead N - Deutsch male, DT-P, integrated For coil dimensions see section C. 9 Coil types R - R series (W) Large ToughCoil Coil special features - No special feature Special features - None (Only required if valve has Special features, omitted if.) Dimensions mm (inch) Torque cartridge in aluminum housing 8-95 Nm (6-7 ft. lbs) Torque cartridge in steel housing -5 Nm (75-85 ft. lbs) Note: When solenoid vale is ordered as, coil nut is included. Installation drawing (Steel) 8,7 (.9) 5, (.98) 8.8 (.).7 (.5) Hex,5 (.7) 5,9 (.8) Torque -6 LB-IN MNUL OVERDRIVE Torque -6 LB-IN 8,9 (.) MNUL OVERDRIVE 85, (.6) 8.7 (.) 5. (.) 8 (.5) 76. (.5) 88.9 (.5) XØ. (.6) 8.55 (.5) 5.6 (.) 5. (.).5 HEX.5 HEX.6 - Thread SV--,8 (.9) 67,8 (.67), (.87) SVB-- Warning Maintain.5- Nm (.8-. ft. lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Warning luminum housings can be used for pressures up to bar ( psi). Steel housings must be used for operating pressures above bar ( psi). Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 -

142 SV-8-/M - Solenoid valve -way, -position, spool type solenoid valve Up to L/min ( USgpm) bar ( psi) Sectional view Operation In the de-energized position this valve allows flow from port to port and from port to port. Performance data In the energized position flow is allowed from port to port and from port to port. Features Hardened, ground and honed working parts to limit leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low Pressure drop. Rated pressure on all ports. Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) Cartridge fatigue pressure (infinite life) Rated flow Internal leakage (per land) Temperature range Coil duty Fluids bar ( psi) bar ( psi) L/min ( USgpm) 8 cm /min (5 in /min) bar ( psi) - to C (- to 8 F) Continuous from 85% to % of nominal voltage C-8- ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE, etc. Filtration Cleanliness code 8/6/ Housing material (standard) luminum Weight including coil, kg (.69 lbs) Seal kit (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way -position, direct acting, spool type solenoid valve. This valve can be used in applications where the motion of a double acting cylinder or a motor needs to be reversed. Pressure drop Pressure Drop - psi Flow - L/min (,8 cst 9 C) 6 8 Flow - USgpm (5 SUS F) B C 6 8 Pressure Drop - bar - Port to port or port to port B - Port to port C - Port to port - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

143 Model code SV-8-/M - Solenoid valve -way, -position, spool type solenoid valve Up to L/min ( USgpm) bar ( psi) SV 8 (V) (M) () ** **** * S Function SV - Solenoid valve Size 8-8 size Seal material Blank - Buna-N V - Viton Style - -way, position 5 Manual override option Blank - No manual override M - Manual override For valve dimensions with Manual override option installed, see page Valve housing material Omit for - luminum 7 Port size Code Port size Housing number G / BSPP -677 G /8 BSPP -678 T SE T SE See section J for housing details. 8 Voltage rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 9 Connector types G - ISO DIN 65 Q - Spade terminals W - Flying lead N - Deutsch Y - mp JR D - Metripack 5 male J - Metripack 8 male Coil series S - 8 series, W For coil part numbers and dimensions see section C. Special features - None (Only required if valve has Special features omitted if.) Dimensions mm (inch) 6, (.) Torque cartridge in steel housing - Nm (5- ft lbs) Note: When solenoid valve is ordered as, nut is included. Installation drawing Ø,7 (.5) 9. (.75) 5.8 (.) 5.5 (.6) 9. (.75) 5,8 (.) 5,6 (.5) Ø, (.559) Ø,6 (.97) Ø 5,8 (.6) 9, (.75) hex, (.87) hex.75" 6 Thd. 9.8 (.7) 8. (.5) 7 (.88) 8.6 (.5). (.) 7. (.8). (.7) 57.5 (.5) -Slots Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 -

144 SV-8-/M - Solenoid valve -way, -position spool type solenoid valve Up to L/min ( USgpm) 5 bar (5 psi) Operation In the de-energized position this valve allows flow from port to port and from port to port. In the energized position flow is allowed from port to port and from port to port Features Hardened, ground and honed working parts to limit leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low Pressure drop. Rated pressure on all ports. Working pressure 5 bar. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) Cartridge fatigue pressure (infinite life) Rated flow Internal leakage (per land) Temperature range Coil duty Fluids 5 bar (5 psi) bar (5 psi) L/min ( USgpm) 8 cm /min (5 in /min) 5 bar (5 psi) - to C (- to F) Continuous from 85% to % of nominal voltage C-8- ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE, etc. Filtration Cleanliness code 8/6/ Housing material (standard) Steel Weight including coil, kg (. lbs) Seal kit (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way -position, high pressure, direct acting, spool type solenoid valve. This valve can be used in applications where the motion of a double acting cylinder or a motor needs to be reversed. Pressure drop Pressure Drop - psi Flow - L/min (,8 cst 9 C) 6 8 B C 8 6 Pressure Drop - bar Pressure - psi Flow - L/min (,8 cst 9 C) B 7 Pressure - bar Flow - USgpm (5 SUS F) Pressure drop vs. Flow - Port to port or port to port B - Port to C - Port to Flow - USgpm (5 SUS F) Operating Limits - Port to port, to, and to B - Port to port - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

145 Model code SV-8-/M - Solenoid valve -way, -position spool type solenoid valve Up to L/min ( USgpm) 5 bar (5 psi) SV 8 (V) (M) (S) ** **** * P Function SV - Solenoid valve Size 8-8 size Seal material Blank - Buna-N V - Viton Style - -way, position 5 Manual override option Blank - No manual override M - Manual override For valve dimensions with Manual override option installed, see page Valve housing material Blank - - luminum 7 Port size Code Port size Housing number G / BSPP -675 G /8 BSPP -675 T SE T SE See section J for housing details. 8 Voltage rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 9 Connector types G - ISO DIN 65 Q - Spade terminals W - Flying lead N - Deutsch Y - mp JR D - Metripack 5 male J - Metripack 8 male For coil part numbers and dimensions see section C. Coil series P - 8 series, W For coil part numbers and dimensions see section C. Special features - None (Only required if valve has Special features omitted if.) Dimensions mm (inch) 6, (.) Torque cartridge in steel or aluminum housing - Nm (5- ft lbs) Note: When solenoid valve is ordered as, nut is included. Installation drawing 5.8 (.) 5,5 (.5) Ø,7 (.5) Ø,6 (.5) Ø 5,8 (.6).75" 6 Thd. Ø, (.559) 9, (.75) hex, (.87) hex 9. (.75) 9.8 (.7) 8. (.5) 5.8 (.) 7 (.88) 8.6 (.5). (.) 7. (.8). (.7) 57.5 (.5) -Slots 5.5 (.6) 9. (.75) Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

146 SV-8-/M - Solenoid valve -way, -position spool type solenoid valve Up to L/min ( USgpm) bar ( psi) Operation In the de-energized position all ports are blocked. In the energized position flow is allowed from port to port and from port to port Features Hardened, ground and honed working parts to limit leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low Pressure drop. Rated pressure on all ports.. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) Cartridge fatigue pressure (infinite life) Rated flow Internal leakage Temperature range Coil duty Response times (% rated voltage and flow) Fluids bar ( psi) bar ( psi) L/min ( USgpm) 8 cm /min (5 in /min) 5 bar (5 psi) - to C (- to F) Continuous from 85% to % of nominal voltage Energize: ms De-Energize: ms C-8- ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE, etc. Filtration Cleanliness code 8/6/ Housing material (standard) luminum Weight including coil, kg (.66 lbs) Seal kit (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way -position, direct acting, spool type solenoid valve. This valve can be used in applications where a double acting actuator needs to be isolated. Pressure drop Pressure Drop - psi Flow - L/min (,8 cst 9 C) B Pressure Drop - bar Flow - USgpm (5 SUS F) - Port to port B - Port to -6 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

147 Model code SV-8-/M - Solenoid valve -way, -position spool type solenoid valve Up to L/min ( USgpm) bar ( psi) SV 8 (V) (M) () ** **** * S Function SV - Solenoid valve Size 8-8 size Seal material Blank - Buna-N V - Viton Style - -way, position 5 Manual override option Blank - No manual override M - Manual override For valve dimensions with Manual override option installed, see page Valve housing material Omit for - luminum 7 Port size Code Port size Housing number G / BSPP -677 G /8 BSPP -678 T SE T SE See section J for housing details. 8 Voltage rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 9 Connector types G - ISO DIN 65 Q - Spade terminals W - Flying lead N - Deutsch Y - mp JR D - Metripack 5 male J - Metripack 8 male For coil part numbers and dimensions see section C. Coil series S - 8 series, W For coil part numbers and dimensions see section C. Special features - None (Only required if valve has Special features omitted if.) Dimensions mm (inch) Torque cartridge in steel or aluminum housing - Nm (5- ft lbs) Note: When solenoid valve is ordered as, nut is included. Installation drawing 6, (.) 9. (.75) 5.8 (.) 5.5 (.6) 9. (.75) Ø,7 (.5) 5,8 (.) 9, (.75) hex, (.87) hex 9.8 (.7) 8. (.5) 7 (.88) 8.6 (.5). (.) 7. (.8) 57.5 (.5) -Slots. (.7) 5,6 (.5) Ø,6 (.97) Ø, (.559) Ø 5,8 (.6).75 6 Thd. Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

148 SV-8-/M - Solenoid valve -way, -position spool type solenoid valve Up to L/min ( USgpm) 5 bar (5 psi) Operation In the de-energized position all ports are blocked. In the energized position flow is allowed from port to port and from port to port. Features Hardened, ground and honed working parts to limit leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low Pressure drop. Rated pressure on all ports. Working pressure 5 bar. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) 5 bar (5 psi) Cartridge fatigue pressure (infinite life) bar (5 psi) Rated flow L/min ( USgpm) Internal leakage, port to port 8 cm /min (5 in /min) 5 bar (5 psi) Temperature range - to C (- to F) Coil duty Continuous from 85% to % of nominal voltage C-8- ll general purpose hydraulic fluids such as: Fluids MIL-H-566, SE, SE, etc. Filtration Cleanliness code 8/6/ Housing material (standard) Steel Weight -, kg (. lbs) Seal kit (Buna-N), (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way -position, high pressure, direct acting, spool type solenoid valve. This valve can be used in applications where a double acting actuator needs to be isolated. Pressure drop Pressure Drop - psi Flow - L/min (,8 cst 9 C) B 8 6 Pressure Drop - bar Pressure - psi 5 Flow - L/min (,8 cst 9 C) 6 8 B Pressure - bar Flow - USgpm (5 SUS F) Pressure drop vs. Flow - Port to port B - Port to Flow - USgpm (5 SUS F) Operating Limits - Port to port B - Port to port -8 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

149 Model code SV-8-/M - Solenoid valve -way, -position spool type solenoid valve Up to L/min ( USgpm) 5 bar (5 psi) SV 8 (V) (M) (S) ** **** * P Function SV - Solenoid valve Size 8-8 size Seal material Blank - Buna-N V - Viton Style - -way, position 5 Manual override option Blank - No manual override M - Manual override For valve dimensions with Manual override option installed, see page Valve housing material Blank - Omit for - luminum 7 Port size Code Port size Housing number G / BSPP -675 G /8 BSPP -675 T SE T SE See section J for housing details. 8 Voltage rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 9 Connector types G - ISO DIN 65 Q - Spade terminals W - Flying lead N - Deutsch Y - mp JR D - Metripack 5 male J - Metripack 8 male For coil part numbers and dimensions see section C. Coil series P - 8 series, W For coil part numbers and dimensions see section C. Special features - None (Only required if valve has Special features omitted if.) Dimensions mm (inch) Torque cartridge in steel or aluminum housing - Nm (5- ft lbs) 9,6 (.6) Note: When solenoid valve is ordered as, nut is included. Installation drawing 5.8 (.) Ø 8,9 (.5) 9, (.75) hex, (.87) hex 9. (.75) 9.8 (.7) 8. (.5) 5.8 (.) 7 (.88) 8.6 (.5). (.) 7. (.8). (.7) 57.5 (.5) -Slots 5.5 (.6) 9. (.75) 5,5 (.5) Ø,6 (.5) Ø 5,8 (.6).75 6 Thd. Ø, (.559) Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

150 SV--/M/R - Solenoid valve -way, -position spool type solenoid valve Up to L/min (6 USgpm) bar ( psi) Operation In the de-energized position this valve allows flow from port to port and from port to port. In the energized position flow is allowed from port to port and from port to port Features Hardened, ground and honed working parts to limit leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low Pressure drop. Rated pressure on all ports. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) Cartridge fatigue pressure (infinite life) Rated flow Internal leakage Temperature range Coil duty Fluids bar ( psi) bar ( psi) L/min (6 USgpm) 6 cm /min ( in /min) bar ( psi) - to C (- to 8 F) Continuous from 85% to % of nominal voltage C-- ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE, etc. Filtration Cleanliness code 8/6/ Housing material (standard) luminum Weight including coil, kg (.96 lbs) Seal kit (Buna-N), 5668 (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way -position, direct acting, spool type solenoid valve. This valve can be used in applications where the motion of a double acting cylinder or a motor needs to be reversed. Pressure drop Pressure Drop - psi Flow - L/min (,8 cst 9 C) 5 5 B 6 5 Pressure Drop - bar 6 Flow - USgpm (5 SUS F) - Port to port B - Port to port -5 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

151 Model code SV--/M/R - Solenoid valve -way, -position spool type solenoid valve Up to L/min (6 USgpm) bar ( psi) SV (V) (*) ** **** * Function SV - Solenoid valve Size - size Seal material Blank - Buna-N V - Viton Style - -way, position 5 Manual override option Blank - No manual override M - Knob type R - Cable type For valve dimensions with Manual override option installed, see page Port size Code Port size Housing number B /8 BSPP -7975* 6T SE * G / BSPP G /8 BSPP H SE H SE *Light duty housing. See section J for housing details. 7 Voltage rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 8 Connector types G - ISO DIN 65 Q - Spade terminals W - Flying lead N - Deutsch Y - mp JR D - Metripack 5 male J - Metripack 8 male For coil part numbers and dimensions see section C. 9 Special features - None (Only required if valve has Special features omitted if.) Dimensions mm (inch) Torque cartridge in aluminum housing 7-5 Nm (-6 ft lbs) Note: When solenoid valve is ordered as, nut is included. Note: Use J series W coils with this solenoid valve. 9,6 (.6) Installation drawing Ø 8,9 (.5) 9, (.75) hex 5. (.) 6.7 (.) 88.9 (.5) 57. (.5) 76. (.).8 (.8) 5.6 (.7) 7. (.8) 5. (.) 9.5 (.8) 57.5 (.5) 76. (.) -Slots 5, (.) hex 6, (.) Ø 5,8 (.6) Ø 7, (.685) Ø 8,97 (.77).875" Thd. Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

152 S5 - Solenoid valve -way, -position spool type solenoid valve Up to 5 L/min (9 USgpm) bar ( psi) (B) () (T) (P) Operation In the de-energized position this valve allows flow from port to port and from port to port. In the energized position flow is allowed from port to port and from port to port. Features High flow capacity with reduced space requirements. No dynamic seals. Standard valve bodies and common cavities. One-piece encapsulated coil with minimal amperage draw. Oil immersed armature solenoid. Various coil terminals and voltages. Coil interchangeability with valves of same series. Manual override, seal variations and other options available. Sealed coil arrangement to protect stem from corrosion. Reversible coil without affecting performance. Sectional view Performance data Ratings and specifications Figures based on Viscosity cst (5 SSU) Max working pressure bar ( psi) Rated flow See performance graphs Nominal flow at P = 5 bar (7 psi) L/min (5 USgpm) Internal leakage Less than ml/min past each land bar differential at cst Temperature range - to + C (- to +8 F) C-- (See Section M) Electrical data See coil data sheet Torque cartridge into cavity Nm ( lbs ft) Mounting position Unrestricted Most general purpose hydraulic fluids such as Fluids MIL-H-566, SE, SE etc. Seal material Standard nitrile with PTFE back up rings Filtration BS55/ Class 8/ (5 micron or better) Nominal viscosity range 5 to 5 cst Standard housing materials luminium alloy Coil weight. kg (.6 lbs) Cartridge weight.5 kg (.5 lbs) SK (Nitrile) Seal kit SKV (Viton ) Coil part number C6-*-*/9 Coil voltage available, VDC,,, VC* Viton is a registered trademark of E.I. DuPont *C coils must be used with a rectifying connector Description This is a -way -position, direct acting, spool type solenoid valve. This valve can be used in applications where the motion of a double acting cylinder or a motor needs to be reversed. Pressure drop Pressure - psi Flow - L/min , - & Flow - US gpm 5 Pressure - bar Working pressure - psi Flow - L/min Performance - ND - OR - ND Flow - US gpm 5 5 Working pressure - bar -5 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

153 Model code S5 N * H W S5 - Solenoid valve -way, -position spool type solenoid valve Up to 5 L/min (9 USgpm) bar ( psi) 5 6 Function S5 Seals N - Nitrile V - Viton Coil Termination H - DIN65 F - Flying leads DM - Deutsch moulded Other terminations available on request 6 Port sizes Code Port size Housing number - Body only luminium W /8 BSP B9 W / BSP B98 8T / SE B99 Manual Override - Screw (Consult factory for availability). See page Voltage - VDC - VDC - VC - VC Dimensions mm (inch) Basic Code S5 Installation drawing 6.5 (.5). (.8) 9. (.9) 5.5 (.).5 (.6) 8.5 (.7) 66. (.6) 6.5 (.6) 5. /F 7/8 -- UNF- 8. (.) 5. (.97) holes Ø7. (.8) thro.8 (.5) 6.5 (.5) 7. (.88) 5.8 (.) 5.5 (.99) 6. (.6) 8.6 (.5).8 (.5) Ø5.8 (.6) Ø7. (.69) Ø9. (.75) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

154 SV--/M - Solenoid valve -way, -position, spool type solenoid valve L/min (6 USgpm) 5 bar (5 psi) Operation In the de-energized position this valve allows flow from port to port and from port to port. In the energized position flow is allowed from port to port and from port to port. Features Hardened, ground and honed working parts to limit leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low Pressure drop. Rated pressure on all ports. Working pressure 5 bar. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) Cartridge fatigue pressure (infinite life) Rated flow Internal leakage, port to port Temperature range Coil duty Fluids 5 bar (5 psi) bar (5 psi) L/min (6 USgpm) 8 cm /min. (5 in /min) 5 bar (5 psi) - to C (- to F) Continuous from 85% to % of nominal voltage C-- ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) Steel Weight, kg (.6 lbs) Seal kit (Buna-N), 5668 (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way -position, high pressure, direct acting, spool type solenoid valve. This valve can be used in applications where the motion of a double acting cylinder or a motor needs to be reversed. Pressure drop Pressure Drop - psi B Flow - USgpm (5 SUS F) - Port to port B - Port to port Flow - L/min (,8 cst 9 C) Pressure Drop - bar -5 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

155 SV--/M - Solenoid valve -way, -position, spool type solenoid valve L/min (6 USgpm) 5 bar (5 psi) Model code SV (V) (M) (S) ** **** * H Function SV - Solenoid valve Size - size Seal material Blank - Buna-N V - Viton Style - -way, -position 5 Manual override option Blank - No manual override M - Manual override For valve dimensions with Manual override option installed see page Valve housing material Blank - Omit for S - Steel 7 Port size Code Port size Housing number G / BSPP -759 G /8 BSPP -75 6T SE T SE See section J for housing details. 8 Voltage rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 9 Coil types G - ISO DIN 65 Q - Spade terminals W - Flying lead N - Deutsch Y - mp JR D - Metripack 5 male J - Metripack 8 male For coil part numbers and dimensions see section C. Coil series H - series, 9W For coil part numbers and dimensions see section C. Special features - None (Only required if valve has Special features omitted if.) Dimensions mm (inch) 9,6 (.6) Torque cartridge in steel housing Nm (5-55 ft lbs) Note: When solenoid valve is ordered as, coil nut is included. Installation drawing, (.875) hex 57,8 (.8) Ø 8,9 (.5). (.87).9 (.7) 88.9 (.5) 76. (.) 57.8 (.8) 9. (.75) 5.8 (.) 7. (.8). (.87) 5, (.) hex.875" Thd. 9.5 (.8) 57.5 (.5) 76. (.) -Slots 6,8 (.) Ø 6, (.6) Ø 9, (.76) Ø 7,6 (.7) Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

156 S5 - Solenoid valve -way, -position spool type solenoid valve Up to L/min (8 USgpm) bar ( psi) (B) () (T) (P) Operation In the de-energized position all ports are blocked. In the energized position flow is allowed from port to port and from port to port. Features High flow capacity with reduced space requirements. No dynamic seals. Standard valve bodies and common cavities. One-piece encapsulated coil with minimal amperage draw. Oil immersed armature solenoid. Various coil terminals and voltages. Coil interchangeability with valves of same series. Manual override, seal variations and other options available. Sealed coil arrangement to protect stem from corrosion. Reversible coil without affecting performance. Sectional view Performance data Ratings and specifications Performance data is typical with Viscosity cst (5 SSU) Max working pressure bar ( psi) Rated flow See performance graphs Nominal flow at P = 5 bar (7 psi) L/min (5 USgpm) Internal leakage Less than ml/min bar differential Temperature range - to + C (- to +8 F) C-- (See Section M) Electrical data See coil data sheet Torque cartridge into cavity Nm ( lbs ft) Mounting position Unrestricted Fluids ll general purpose hydraulics fluids such as MIL-H-566, SE, SE etc Seal material Nitrile with PTFE back up rings Filtration BS55/ Class 8/ (5 micron or better) Nominal viscosity range 5 to 5 cst Standard housing materials luminium alloy Coil weight. kg (.6 lbs) Cartridge weight. kg (. lbs) Seal kit SK (Nitrile) SKV (Viton) Coil part number C6-*-*/9 Coil voltage available, VDC,,, VC* Viton is a registered trademark of E.I. DuPont *C coils must be used with a rectifying connector Description This is a -way -position, high pressure, direct acting, spool type solenoid valve. This valve can be used in applications where a double acting actuator needs to be isolated. Pressure drop Flow - L/min Flow - US gpm Pressure - psi Pressure - bar Working pressure - psi Performance Flow - L/min 65 - ND - OR Flow - US gpm 5 5 Working pressure - bar -56 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

157 Model code S5 N * H W S5 - Solenoid valve -way, -position spool type solenoid valve Up to L/min (8 USgpm) bar ( psi) 5 6 Function S5 Seal material N - Nitrile V - Viton Manual Override - Screw (Consult factory for availability). See page -96. Coil Termination H - DIN65 F - Flying leads DM - Deutsch moulded Other terminations available on request 5 Voltage - VDC - VDC - VC - VC 6 Port size Code Port size Housing number - Body only luminium W /8 BSP B9 W / BSP B98 8T / SE B99 Dimensions mm (inch) Basic Code S5 Installation drawing 6.5 (.5). (.8) 9. (.9) 5.5 (.).5 (.6) 8.5 (.7) 66. (.6) 6.5 (.6) 5. /F 7/8 -- UNF- 8. (.) 5. (.97) holes Ø7. (.8) thro.8 (.5) 6.5 (.5) 7. (.88) 5.8 (.) 5.5 (.99) 6. (.6) 8.6 (.5).8 (.5) Ø5.8 (.6) Ø7. (.69) Ø9. (.75) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

158 SV--/M/R - Solenoid valve -way, -position, spool type solenoid valve L/min (6 USgpm) bar ( psi) Operation In the de-energized position all ports are blocked. In the energized position flow is allowed from port to port and from port to port. Features Hardened, ground and honed working parts to limit leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low Pressure drop. Rated pressure on all ports. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) Cartridge fatigue pressure (infinite life) Rated flow Internal leakage Temperature range Coil duty Fluids bar ( psi) bar ( psi) L/min (6 USgpm) 6 cm /min ( in /min) bar ( psi) - to C (- to 8 F) Continuous from 85% to % of nominal voltage C-- ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) luminum Weight including coil, kg (.96 lbs) Seal kit (Buna-N), 5668 (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way -position, direct acting, spool type solenoid valve. This valve can be used in applications where a double acting actuator needs to be isolated. Pressure drop Pressure Drop - psi Flow - L/min (,8 cst 9 C) 5 5 B 6 5 Pressure Drop - bar 5 6 Flow - USgpm (5 SUS F) - Port to port B - Port to port -58 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

159 Model code SV--/M/R - Solenoid valve -way, -position, spool type solenoid valve L/min (6 USgpm) bar ( psi) SV (V) (*) ** **** * Function SV - Solenoid valve Size - size Seal material Blank - Buna-N V - Viton Style - -way, -position 5 Manual override option Blank - No manual override M - Knob type R - Cable type For valve dimensions with Manual override option installed see page Port size Code Port size Housing number B /8 BSPP -7975* 6T SE * G / BSPP G /8 BSPP H SE H SE *Light duty housing See section J for housing details. 7 Voltage rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 8 Connector types G - ISO DIN 65 Q - Spade terminals W - Flying lead N - Deutsch Y - mp JR D - Metripack 5 male J - Metripack 8 male For coil part numbers and dimensions see section C. 9 Special features - None (Only required if valve has Special features omitted if.) Note: Use J series, W coils with this solenoid valve. Dimensions mm (inch) 9,6 (.6) Torque cartridge in steel housing 7-5 Nm (5- ft lbs) Installation drawing Note: When solenoid valve is ordered as, coil nut is included. Ø 8,9 (.5) 9, (.75) hex 5. (.) 6.7 (.) 88.9 (.5) 57. (.5) 76. (.).8 (.8) 5.6 (.7) 7. (.8) 5. (.) 57, (.5) 5, (.) hex 9.5 (.8) 57.5 (.5) 76. (.) -Slots 6, (.) Ø 7, (.685) Ø 8,97 (.77).875" Thd. Ø 5,8 (.6) Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

160 SV--/M/R - Solenoid valve -way, -position, spool type solenoid valve L/min (6 USgpm) bar ( psi) Operation In the de-energized position flow is allowed from port to port and from port to port. In the energized position all ports are blocked. Features Hardened, ground and honed working parts to limit leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low Pressure drop. Rated pressure on all ports. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) bar ( psi) Cartridge fatigue pressure (infinite life) bar ( psi) Rated flow L/min (6 USgpm) Internal leakage 6 cm /min ( in /min) bar ( psi) Temperature range - to C (- to 8 F) Coil duty Continuous from 85% to % of nominal voltage C-- Fluids ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) luminum Weight including coil, kg (.96 lbs) Seal kit (Buna-N), 5668 (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way -position, direct acting, spool type solenoid valve. This valve can be used in applications where a double acting actuator needs to be isolated. Pressure drop Pressure Drop - psi Flow - L/min (,8 cst 9 C) 5 5 B 6 5 Pressure Drop - bar 5 6 Flow - USgpm (5 SUS F) - Port to port B - Port to port -6 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

161 Model code SV--/M/R - Solenoid valve -way, -position, spool type solenoid valve L/min (6 USgpm) bar ( psi) SV (V) (*) ** **** * Function SV - Solenoid valve Size - size Seal material Blank - Buna-N V - Viton Style - -way, -position 5 Manual override option Blank - No manual override M - Knob type R - Cable type For valve dimensions with Manual override option installed see page -98. Dimensions mm (inch) 6 Port size Code Port size Housing number B /8 BSPP -7975* 6T SE * G / BSPP G /8 BSPP H SE H SE *Light duty housing See section J for housing details. 7 Voltage rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. Torque cartridge in steel housing 7-5 Nm (5- ft lbs) 8 Connector types G - ISO DIN 65 Q - Spade terminals W - Flying lead N - Deutsch Y - mp JR D - Metripack 5 male J - Metripack 8 male For coil part numbers and dimensions see section C. 9 Special features - None (Only required if valve has Special features omitted if.) Note: Use J series, W coils with this solenoid valve. Note: When solenoid valve is ordered as, nut is included. 9,6 (.6) Installation drawing Ø 8,9 (.5) 9, (.75) hex 5. (.) 6.7 (.) 88.9 (.5) 57. (.5) 76. (.).8 (.8) 5.6 (.7) 7. (.8) 5. (.) 57, (.5) 5, (.) hex 9.5 (.8) 57.5 (.5) 76. (.) -Slots 6, (.) Ø 5,8 (.6) Ø 7, (.685) Ø 8,97 (.77).875" Thd. Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

162 SV--/M/R - Solenoid valve -way, -position, spool type solenoid valve L/min (6 USgpm) bar ( psi) Operation In the de-energized position flow is allowed from port to port. Port - port is blocked. In the energized position flow is allowed from port to port, and from port to port. Features Hardened, ground and honed working parts to limit leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low Pressure drop. Rated pressure on all ports. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) bar ( psi) Cartridge fatigue pressure (infinite life) bar ( psi) Rated flow L/min (6 USgpm) Internal leakage 6 cm /min ( in /min) bar ( psi) Temperature range - to C (- to 8 F) Coil duty Continuous from 85% to % of nominal voltage C-- Fluids ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) luminum Weight including coil, kg (.96 lbs) Seal kit (Buna-N), 5668 (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way -position, direct acting, spool type solenoid valve. This valve can be used in applications with double acting actuators held in position by a pilot operated check valve or overcenter valve to ensure the pilot line is drained to tank. Pressure drop Pressure Drop - psi Flow - L/min (,8 cst 9 C) 5 5 B 6 5 Pressure Drop - bar 5 6 Flow - USgpm (5 SUS F) - Port to port B - Port to port -6 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

163 Model code SV--/M/R - Solenoid valve -way, -position, spool type solenoid valve L/min (6 USgpm) bar ( psi) SV (V) (*) ** **** * Function SV - Solenoid valve Size - size Seal material Blank - Buna-N V - Viton Style - -way, -position 5 Manual override option Blank - No manual override M - Knob type R - Cable type For valve dimensions with Manual override option installed see page Port size Code Port size Housing number B /8 BSPP -7975* 6T SE * G / BSPP G /8 BSPP H SE H SE *Light duty housing See section J for housing details. 7 Voltage rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 8 Connector types G - ISO DIN 65 Q - Spade terminals W - Flying lead N - Deutsch Y - mp JR D - Metripack 5 male J - Metripack 8 male For coil part numbers and dimensions see section C. 9 Special features - None (Only required if valve has Special features omitted if.) Note: Use J series, W coils with this solenoid valve. Dimensions mm (inch) Torque cartridge in steel housing 7-5 Nm (5- ft lbs) Installation drawing Note: When solenoid valve is ordered as, nut is included. 9,6 (.6) Ø 8,9 (.5) 9, (.75) hex 5. (.) 6.7 (.) 88.9 (.5) 57. (.5) 76. (.).8 (.8) 5.6 (.7) 7. (.8) 5. (.) 57, (.5) 5, (.) hex 9.5 (.8) 57.5 (.5) 76. (.) -Slots.875" Thd. 6, (.) Ø 5,8 (.6) Ø 7, (.685) Ø 8,97 (.77) Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

164 SV5--/M/R - Solenoid valve -way, -position, spool type solenoid valve L/min (6 USgpm) bar ( psi) Operation In the de-energized position all ports are blocked. In the energized position flow is allowed from port to port and from port to port. Features Hardened, ground and honed working parts to limit leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low Pressure drop. Rated pressure on all ports. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) bar ( psi) Cartridge fatigue pressure (infinite life) bar ( psi) Rated flow L/min (6 USgpm) Internal leakage 6 cm /min ( in /min) bar ( psi) Temperature range - to C (- to 8 F) Coil duty Continuous from 85% to % of nominal voltage C-- Fluids ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) luminum Weight including coil, kg (.96 lbs) Seal kit (Buna-N), 5668 (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way -position, direct acting, spool type solenoid valve. This valve can be used in applications where a double acting actuator needs to be isolated. Pressure drop Pressure Drop - psi Flow - L/min (,8 cst 9 C) 5 5 B 6 5 Pressure Drop - bar 5 6 Flow - USgpm (5 SUS F) - Port to port B - Port to port -6 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

165 Model code SV5--/M/R - Solenoid valve -way, -position, spool type solenoid valve L/min (6 USgpm) bar ( psi) SV5 (V) (*) ** **** * Function SV5 - Solenoid valve Size - size Seal material Blank - Buna-N V - Viton Style - -way, -position 5 Manual override option Blank - No manual override M - Knob type R - Cable type For valve dimensions with Manual override option installed see page Port size Code Port size Housing number B /8 BSPP -7975* 6T SE * G / BSPP G /8 BSPP H SE H SE *Light duty housing See section J for housing details. 7 Voltage rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 8 Connector types G - ISO DIN 65 Q - Spade terminals W - Flying lead N - Deutsch Y - mp JR D - Metripack 5 male J - Metripack 8 male For coil part numbers and dimensions see section C. 9 Special features - None (Only required if valve has Special features omitted if.) Note: Use J series W coils with this solenoid valve. Dimensions mm (inch) Torque cartridge in steel housing 7-5 Nm (5- ft lbs) Note: When solenoid valve is ordered as, nut is included. 9,6 (.6) Installation drawing 9. (.75) Hex Ø 8,9 (.5) 5. (.) 57. (.5) 5. (.) Hex.8 (.8) 5. (.) 57, (.5) 9, (.75) hex 6.7 (.) 76. (.) 88.9 (.5) 5.6 (.7) 7. (.8) 6, (.) Ø 5,8 (.6) Ø 7, (.685) Ø 8,97 (.77) 5, (.) hex.875" Thd. 9.5 (.8) 57.5 (.5) 76. (.) -Slots Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

166 SV7--/P/S - Solenoid valve -way, -position, spool type solenoid valve 7 L/min (5 USgpm) bar ( psi) Operation In the de-energized position this valve allows flow from port to port and from port to port. In the energized position flow is allowed from port to port and from port to port. Features Hardened, ground and honed working parts to limit leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low Pressure drop. Rated pressure on all ports. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) bar ( psi) Cartridge fatigue pressure (infinite life) bar ( psi) Rated flow 7 L/min (5 USgpm) Internal leakage 6 cm /min ( in /min) bar ( psi) Temperature range - to C (- to 8 F) Coil duty Continuous from 85% to % of nominal voltage C-- Fluids ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) luminum Weight including coil, kg (.96 lbs) Seal kit (Buna-N), 5668 (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way -position, direct acting, spool type solenoid valve. This valve can be used in applications where the motion of a double acting cylinder or a motor needs to be reversed. Pressure drop Pressure Drop - psi Flow - L/min (,8 cst 9 C) 5 5 B C D 6 5 Pressure Drop - bar 5 Flow - USgpm (5 SUS F) - Port to port energized B - Port to port energized C - Port to port de-energized D - Port to port de-energized -66 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

167 Model code SV7--/P/S - Solenoid valve -way, -position, spool type solenoid valve 7 L/min (5 USgpm) bar ( psi) SV7 (V) (*) ** **** * Function SV7 - Solenoid valve Size - size Seal material Blank - Buna-N V - Viton Style - -way, -position 5 Manual override option Blank - No manual override P - Push type S - Screw type For valve dimensions with Manual override option installed see page Port size Code Port size Housing number B /8 BSPP -7975* 6T SE * G / BSPP G /8 BSPP H SE H SE *Light duty housing See section J for housing details. 7 Voltage rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 8 Connector types G - ISO DIN 65 Q - Spade terminals W - Flying lead N - Deutsch Y - mp JR D - Metripack 5 male J - Metripack 8 male For coil part numbers and dimensions see section C. 9 Special features - None (Only required if valve has Special features omitted if.) Note: Use J series W coils with this solenoid valve. Dimensions mm (inch) Torque cartridge in steel housing 7-5 Nm (5- ft lbs) Note: When solenoid valve is ordered as, nut is included. 9,6 (.6) Installation drawing Ø 8,9 (.5) 9, (.75) hex 5. (.) 7.9 (.77) 6.7 (.) 76. (.) 88.9 (.5).8 (.8) 5.6 (.7) 7. (.8) 5. (.) 69,8 (.75) 5, (.) hex 9.5 (.8) 57.5 (.5) 76. (.) -Slots.875" Thd. 6, (.) Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Ø 5,8 (.6) Ø 7, (.685) Ø 8,97 (.77) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

168 SV7M--P - Solenoid valve -way, -position, spool type solenoid valve 7 L/min (5 USgpm) 5 bar (5 psi) Sectional view Operation In the de-energized position this valve allows flow between port to port and between port to port in both directions. Performance data In the energized position flow is allowed between port to port and between port to port in both directions. Features Hardened, ground and honed working parts to limit leakage. IP69K Large ToughCoil compatibility. Continuously rated. Compact design with low Pressure drop. Rated pressure on all ports. Working pressure 5 bar. Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports except port ) 5 bar (5 psi) Typical application pressure at port bar ( psi) Cartridge fatigue pressure (infinite life) 5 bar (5 psi) Rated flow 7 L/min (5 USgpm) Internal leakage 5 cc/min (.5 in bar ( psi) Temperature range - to C (- to 8 F) Coil duty Continuos from 85% to % of nominal voltage C-- Fluids ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE, etc. Filtration Cleanliness code 8/6/ Standard housing materials Steel Weight including coil. kg (.96 lbs) Seal kit Buna-N), 5668 (Viton Viton is a registered trademark of E.I. DuPont Description This is a -way -position, direct acting, high pressure, spool type solenoid valve. This valve can be used in applications where the motion of a double acting cylinder or a motor needs to be reversed. Pressure drop Pressure - psi Flow - L/min (,8 cst 9 F) 5 5 C D B 7 Pressure - bar Flow - USgpm (5 SUS F) - Port to port energized B - Port to port de-energized C - Port to port de-energized D - Port to port energized -68 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

169 Model code SV7M--P - Solenoid valve -way, -position, spool type solenoid valve 7 L/min (5 USgpm) 5 bar (5 psi) SV7 * * P **** **** * * ** ** Function SV7 - Solenoid valve Max flow M - L/min (6 USgpm) Size - Size Seal material Blank - Buna-N V - Viton 5 Style P - way push type manual override Dimensions mm (inch) 6 Port size Code Port size Housing number luminium Steel G / BSPP -858 G /8 BSPP H SE H SE SG / BSPP -759 SG /8-75 S6T SE S8T SE Voltage rating - No coil D - VDC D - VDC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 8 Connector types W - Flying lead N - Deutsch male, DT-P, integrated For coil part numbers and dimensions see section C. Torque cartridge in aluminum housing 7-5 Nm (5- ft. lbs) Torque cartridge in steel housing Nm (5-55 ft. lbs) 9 Coil types R - R series (W) Large ToughCoil Coil special features - No special feature Special features - None (Only required if valve has Special features omitted if.) Note: When solenoid vale is ordered as, coil nut is included. Installation drawing (Steel) 87.7 [.5] 5. [.] HEX. 7 / 8 - UNF - THD..9 (.7). (.87).5 (.75) 87.7 (.5) (.) (.5) 9.5 (.7) 76. (.) X Ø7. (.8) 57.5 (.5) 9 (.75) 5.8 (.). (.87).5 [.7] 8.7 [.9] 6 [.] [ ] [.6-6] [ ] Warning Maintain.5- Nm (.8-. ft. lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Warning luminum housings can be used for pressures up to bar ( psi). Steel housings must be used for operating pressures above bar ( psi). Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

170 SVM-- - Solenoid valve -way, -position, spool type solenoid valve Up to L/min ( USgpm) bar ( psi) Operation In the de-energized position all ports are blocked. In the energized position flow is allowed between port to port and between port to port in both directions. Features Hardened, ground and honed working parts to limit leakage. IP69K Large ToughCoil compatibility. Continuously rated. Compact design with low Pressure drop. Rated pressure on all ports. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure bar ( psi) Cartridge fatigue pressure (infinite life) bar ( psi) Rated flow L/min ( USgpm) Internal leakage cm /min (.5 in /min) bar ( psi) Temperature range - to C (- to 8 F) Coil duty Continuous from 85% to % of nominal voltage C-- Fluids ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) luminum Weight including coil,86 kg (.9 lbs) Seal kit 6979 (Buna-N), 698 (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way -position, direct acting, spool type solenoid valve. This valve can be used in applications where a double acting actuator needs to be isolated. Pressure drop Pressure Drop - psi 8 6 Flow - L/min Flow - USgpm B 6 5 Pressure Drop - bar - Port to port B - Port to port -7 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

171 SVM-- - Solenoid valve -way, -position, spool type solenoid valve Up to L/min ( USgpm) bar ( psi) Model code SV * * P **** **** * * ** ** Function SV - Solenoid valve Max flow M - L/min (USgpm) 6 Port size Code Port size Housing number 6G / BSPP T SE 657- H SE Coil types L - L series (W EN 9) used for SV- R - R series (W) Large ToughCoil Size - size Seal material Blank - Buna-N V - Viton 5 Style P - -way, push type manual override See section J for housing details. 7 Voltage rating - No coil D - VDC D - VDC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 8 Connector types W - Flying lead N - Deutsch male, DT-P, integrated For coil part numbers and dimensions see section C. Coil special features - No special feature Special features - None (Only required if valve has special features omitted if.) SF - Soft shift Dimensions mm (inch) Torque cartridge in steel housing 8-95 Nm (6-7 ft lbs) Note: When solenoid valve is ordered as, nut is included. Installation drawing 8,7 (.9) 5, (.98) 6.7 (.5),5 (.7) Torque -6 LB-IN MNUL OVERDRIVE Torque -6 LB-IN 8,9 (.) 5,9 (.8) MNUL OVERDRIVE 85, (.6) 8.7 (.) 7. (.9).6 (.) 7 (5.) 8.9 (.) Slots 8.75 (.) 5.6 (.).5 HEX.6 - Thread.5 HEX.6 - Thread 6.5 (.5).8 (.5). (.) 88.9 (.5) 68.8 (.688).8 (.5) Ø,8 (.95) 9,9 (.58) Ø, (.87) Ø,6 (.8) SV-- SVB-- Warning Maintain.5- Nm (.8-. ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

172 SVM-- - Solenoid valve -way, -position, spool type solenoid valve Up to L/min ( USgpm) 5 bar (5 psi) Sectional view Operation In the de-energized position all ports are blocked. Performance data In the energized position flow is allowed between port to port and between port to port in both directions. Features Hardened, ground and honed working parts to limit leakage. IP69K Large ToughCoil compatibility. Continuously rated. Compact design with low pressure drop. Rated pressure on all ports. Working pressure 5 bar. Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports except port ) 5 bar (5 psi) Typical application pressure at port bar ( psi) Cartridge fatigue pressure (infinite life) 5 bar (5 psi) Rated flow L/min ( USgpm) Internal leakage 5 cc/min (.5 bar ( psi) Temperature range - to C (- to 8 F) Coil duty Continuos from 85% to % of nominal voltage C-- Fluids ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE, etc. Filtration Cleanliness code 8/6/ Standard housing materials Steel Weight including coil.86 kg (.9 lbs) Seal kit 6979 Buna-N), 698 (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way -position, direct acting, high pressure, spool type solenoid valve. This valve can be used in applications where a double acting actuator needs to be isolated. Pressure drop 8 Flow - L/min Pressure Drop - psi 6 B Pressure Drop - bar Flow - USgpm - Port to port B - Port to port -7 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

173 SVM-- - Solenoid valve -way, -position, spool type solenoid valve Up to L/min ( USgpm) 5 bar (5 psi) Model code SV * * P **** **** * * ** ** Function SV - Solenoid valve Max flow M - L/min (USgpm) Size - size Seal material Blank - Buna-N V - Viton 5 Style P - -way, push type manual override 6 Port size Code Port size Housing number luminium Steel 6G / BSPP H SE H SE S6G / BSPP ST SE ST SE Voltage rating - No coil D - VDC D - VDC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 8 Connector types W - Flying lead N - Deutsch male, DT-P, integrated For coil part numbers and dimensions see section C. 9 Coil types L - L series (W EN 9) used for SV- R - R series (W) Large ToughCoil Coil special features - No special feature Special features - None (Only required if valve has Special features omitted if.) Dimensions mm (inch) 8,7 (.9) 5, (.98) Torque cartridge in steel housing -5 Nm (75-85 ft. lbs) Installation drawing (Steel) NNotes: When solenoid vale is ordered as, coil nut is included. 6.7 (.5),5 (.7) Torque -6 LB-IN.5 HEX.6 - Thread MNUL OVERDRIVE Torque -6 LB-IN 8,9 (.) 5,9 (.8).5 HEX.6 - Thread MNUL OVERDRIVE 85, (.6) 8.7 (.) 7. (.9) 6.5 (.5).8 (.5).6 (.) 7 (5.). (.) 88.9 (.5) 8.9 (.) Slots 8.75 (.) 68.8 (.688).8 (.5) 5.6 (.) Ø,8 (.95) 9,9 (.58) Ø, (.87) Ø,6 (.8) SV-- SVB-- Warning luminum housings can be used for pressures up to bar ( psi). Steel housings must be used for operating pressures above bar ( psi). Warning Maintain.5- Nm (.8-. ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

174 SVM-- - Solenoid valve -way, -position, spool type solenoid valve Up to 5 L/min ( USgpm) bar ( psi) Operation In the de-energized position flow is allowed from port to port and from port to port in both directions. In the energized position all ports are blocked. Features Hardened, ground and honed working parts to limit leakage. IP69K Large ToughCoil compatibility. Continuously rated. Compact design with low pressure drop. Rated pressure on all ports. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure bar ( psi) Cartridge fatigue pressure (infinite life) bar ( psi) Rated flow 5 L/min ( USgpm) Internal leakage cm /min (.5 in /min) bar ( psi) Temperature range - to C (- to 8 F) Coil duty Continuous from 85% to % of nominal voltage C-- Fluids ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) luminum Weight including coil,86 kg (.9 lbs) Seal kit 6979 (Buna-N), 698 (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way -position, direct acting, spool type solenoid valve. This valve can be used in applications where a double acting actuator needs to be isolated. Pressure drop Pressure Drop - psi Flow - L/min Flow - USgpm B Pressure Drop - bar - Port to port B - Port to port -7 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

175 SVM-- - Solenoid valve -way, -position, spool type solenoid valve Up to 5 L/min ( USgpm) bar ( psi) Model code SV * * P **** **** * * ** ** Function SV - Solenoid valve Max flow M - 5 L/min (USgpm) 6 Port Size Code Port size Housing number 6G / BSPP T SE 657- H SE Coil types L - L series (W EN 9) used for SV- R - R series (W) Large ToughCoil Size - size Seal material Blank - Buna-N V - Viton 5 Style P - -way, push type manual override See section J for housing details. 7 Voltage rating - No coil D - VDC D - VDC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 8 Connector types W - Flying lead N - Deutsch male, DT-P, integrated For coil part numbers and dimensions see section C. Coil series - No special feature Special features - None (Only required if valve has Special features omitted if.) SF - Soft shift Dimensions mm (inch) Torque cartridge in steel housing 8-95 Nm (6-7 ft lbs) NNote: When solenoid valve is ordered as, nut is included. Installation drawing 8,7 (.9) 5, (.98) 6.7 (.5),5 (.7) Torque -6 LB-IN.5 HEX.6 - Thread MNUL OVERDRIVE Torque -6 LB-IN 8,9 (.) 5,9 (.8).5 HEX.6 - Thread MNUL OVERDRIVE 85, (.6) 8.7 (.) 7. (.9) 6.5 (.5).8 (.5).7 (.5) Hex.6 (.) 7 (5.). (.) 88.9 (.5) 8.9 (.) Slots 8.75 (.) 68.8 (.688).8 (.5) 5.6 (.) Ø,8 (.95) 9,9 (.58) Ø, (.87) Ø,6 (.8) SV-- SVB-- Warning Maintain.5- Nm (.8-. ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

176 SVM-- - Solenoid valve -way, -position, spool type solenoid valve Up to 5 L/min ( USgpm) 5 bar (5 psi) Sectional view Operation In the de-energized position flow is allowed from port to port and from port to port in both directions. Performance data In the energized position all ports are blocked. Features Hardened, ground and honed working parts to limit leakage. IP69K Large ToughCoil compatibility. Continuously rated. Compact design with low pressure drop. Rated pressure on all ports. Working pressure 5 bar. Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports except port ) 5 bar (5 psi) Typical application pressure at port bar ( psi) Cartridge fatigue pressure (infinite life) 5 bar (5 psi) Rated flow 5 L/min ( USgpm) Internal leakage 5 cc/min (.5 bar ( psi) Temperature range - to C (- to 8 F) Coil duty Continuos from 85% to % of nominal voltage C-- Fluids ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE, etc. Filtration Cleanliness code 8/6/ Standard housing materials Steel Weight including coil.86 kg (.9 lbs) Seal kit 6979 Buna-N), 698 (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way -position, direct acting, high pressure, spool type solenoid valve. This valve can be used in applications where a double acting actuator needs to be isolated. Pressure drop Flow - L/min Pressure Drop - psi 8 6 B Pressure Drop - bar Flow - USgpm - Port to port B - Port to port -76 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

177 Model code SVM-- - Solenoid valve -way, -position, spool type solenoid valve Up to 5 L/min ( USgpm) 5 bar (5 psi) SV * * P **** **** * * ** ** Function SV - Solenoid valve Max flow M - 5 L/min ( USgpm) Size - size Seal material Blank - Buna-N V - Viton 5 Style P - way, push type manual override 6 Port Size Code Port size Housing number luminium Steel 6G / BSPP H SE H SE S6G / BSPP ST SE ST SE Voltage rating - No coil D - VDC D - VDC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 8 Connector types W - Flying lead N - Deutsch male, DT-P, integrated For coil dimensions see section C. 9 Coil types R - R series (W) Large ToughCoil Coil special features - No special feature Special features - None (Only required if valve has Special features, omitted if.) Dimensions mm (inch) Torque cartridge in aluminum housing 8-95 Nm (6-7 ft. lbs) Torque cartridge in steel housing -5 Nm (75-85 ft. lbs) NNotes: When solenoid vale is ordered as, coil nut is included. Installation drawing (Steel) 8,7 (.9) 5, (.98) 6.7 (.5),5 (.7) Torque -6 LB-IN.5 HEX.6 - Thread MNUL OVERDRIVE Torque -6 LB-IN 8,9 (.) 5,9 (.8).5 HEX.6 - Thread MNUL OVERDRIVE 85, (.6) 8.7 (.) 7. (.9) 6.5 (.5).8 (.5).7 (.5) Hex.6 (.) 7 (5.). (.) 88.9 (.5) 8.9 (.) Slots 8.75 (.) 68.8 (.688).8 (.5) 5.6 (.) Ø,8 (.95) 9,9 (.58) Ø, (.87) Ø,6 (.8) SV-- SVB-- Warning Maintain.5- Nm (.8-. ft. lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Warning luminum housings can be used for pressures up to bar ( psi). Steel housings must be used for operating pressures above bar ( psi). Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

178 SV5M-- - Solenoid valve -way, -position, spool type solenoid valve Up to 5 L/min ( USgpm) bar ( psi) Sectional view Operation In the de-energized position all ports are blocked. Performance data In the energized position flow is allowed between port to port and between port to port in both directions. Features Hardened, ground and honed working parts to limit leakage. IP69K Large ToughCoil compatibility. Continuously rated. Compact design with low pressure drop. Rated pressure on all ports. Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure bar ( psi) Cartridge fatigue pressure (infinite life) bar ( psi) Rated flow 5 L/min ( USgpm) Internal leakage cm /min (.5 in /min) bar ( psi) Temperature range - to C (- to 8 F) Coil duty Continuous from 85% to % of nominal voltage C-- Fluids ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) luminum Weight including coil,86 kg (.9 lbs) Seal kit 6979 (Buna-N), 698 (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way -position, direct acting, spool type solenoid valve. This valve can be used in applications where a double acting actuator needs to be isolated. Pressure drop Pressure Drop (psi) Flow - L/min (,8 cst C) B Flow - US gpm (5 SUS F) Pressure Drop (bar) - Port to port B - Port to port -78 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

179 SV5M-- - Solenoid valve -way, -position, spool type solenoid valve Up to 5 L/min ( USgpm) bar ( psi) Model code SV5 * * P **** **** * * * ** Function SV5 - Solenoid valve Max flow M - 5 L/min (USgpm) Size - size 6 Port Size Code Port size Housing number 6G / BSPP T SE 657- H SE See section J for housing details. 9 Coil types R - R series (W) Large ToughCoil Coil special features - No special feature Seal material Blank - Buna-N V - Viton 5 Style P - -way, push type manual override 7 Voltage rating - No coil D - VDC D - VDC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 8 Connector types W - Flying lead N - Deutsch male, DT-P, integrated For coil part numbers and dimensions see section C. Special features - None (Only required if valve has Special features omitted if.) SF - Soft shift Dimensions mm (inch) Torque cartridge in steel housing 8-95 Nm (6-75 ft lbs) Installation drawing NNote: When solenoid valve is ordered as, nut is included. 8,7 (.9) 5, (.98) 6.7 (.5),5 (.7) Torque -6 LB-IN Manual Overdrive 5,9 (.8) Torque -6 LB-IN Manual Overdrive 8.7 (.) 7. (.9).7 (.5) Hex.6 (.) 7 (5.) 8.9 (.) Slots 8.75 (.) 5.6 (.).5 HEX.6 - Thread 8,9 (.).5 HEX.6 - Thread 85, (.6) 6.5 (.5).8 (.5). (.) 88.9 (.5) 68.8 (.688).8 (.5) Ø,8 (.95) Ø, (.87) Ø,6 (.8) SV5-- 9,9 (.58) SV5B-- Warning Maintain.5- Nm (.8-. ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

180 SV5M-- - Solenoid valve -way, -position, spool type solenoid valve Up to 5 L/min ( USgpm) 5 bar (5 psi) Operation In the de-energized position all ports are blocked. In the energized position flow is allowed between port to port and between port to port in both directions. Features Hardened, ground and honed working parts to limit leakage. IP69K Large ToughCoil compatibility. Continuously rated. Compact design with low pressure drop. Rated pressure on all ports. Working pressure 5 bar. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports except port ) 5 bar (5 psi) Typical application pressure at port bar ( psi) Cartridge fatigue pressure (infinite life) 5 bar (5 psi) Rated flow 5 L/min ( USgpm) Internal leakage 5 cc/min (.5 in bar ( psi) Temperature range - to C (- to 8 F) Coil duty Continuos from 85% to % of nominal voltage C-- Fluids ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE, etc. Filtration Cleanliness code 8/6/ Standard housing materials Steel Weight including coil.86 kg (.9 lbs) Seal kit 6979 Buna-N), 698 (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way -position, direct acting, high pressure, spool type solenoid valve. This valve can be used in applications where a double acting actuator needs to be isolated. Pressure drop Pressure Drop (psi) Flow - L/min (,8 cst C) B Flow - US gpm (5 SUS F) Pressure Drop (bar) - Port to port B - Port to port -8 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

181 SV5M-- - Solenoid valve -way, -position, spool type solenoid valve Up to 5 L/min ( USgpm) 5 bar (5 psi) Model code SV5 * * P **** **** * * ** ** Function SV5 - Solenoid valve Max flow M - 5 L/min (USgpm) Size - size Seal material Blank - Buna-N V - Viton 5 Style P - -way, push type manual override 6 Port Size - Code Port size Housing number luminium Steel 6G / BSPP H SE H SE S6G / BSPP 599- ST SE ST SE Voltage rating - No coil D - VDC D - VDC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 8 Connector types W - Flying lead N - Deutsch male, DT-P, integrated For coil part numbers and dimensions see section C. 9 Coil types R - R series (W) Large ToughCoil Coil special features - No special feature Special features - None (Only required if valve has Special features omitted if.) Dimensions mm (inch) Torque cartridge in steel housing -5 Nm (75-85 ft lbs) Torque cartridge in aluminum housing 8-95 Nm (6-7 ft lbs) NNote: When solenoid valve is ordered as, nut is included. Installation drawing (Steel) 8,7 (.9) 5, (.98) 6.7 (.5),5 (.7) Torque -6 LB-IN Manual Overdrive 5,9 (.8) Torque -6 LB-IN Manual Overdrive 8.7 (.) 7. (.9).7 (.5) Hex.6 (.) 7 (5.) 8.9 (.) Slots 8.75 (.) 5.6 (.).5 HEX.6 - Thread 8,9 (.).5 HEX.6 - Thread 85, (.6) 6.5 (.5).8 (.5). (.) 88.9 (.5) 68.8 (.688).8 (.5) Ø,8 (.95) Ø, (.87) Ø,6 (.8) SV5-- 9,9 (.58) SV5B-- Warning Maintain.5- Nm (.8-. ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

182 SV7M-- - Solenoid valve -way, -position, spool type solenoid valve Up to 6 L/min ( USgpm) bar ( psi) Operation In the de-energized position this valve allows flow between port to port and between port to port. In the energized position flow is allowed between port to port and between port to port. Features Hardened, ground and honed working parts to limit leakage. IP69K Large ToughCoil compatibility. Continuously rated. Compact design with low pressure drop. Rated pressure on all ports. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure bar ( psi) Cartridge fatigue pressure (infinite life) bar ( psi) Rated flow 6 L/min ( USgpm) Internal leakage cm /min (.5 in /min) bar ( psi) Temperature range - to C (- to 8 F) Coil duty Continuous from 85% to % of nominal voltage C-- Fluids ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) luminum Weight including coil,86 kg (.9 lbs) Seal kit 6979 (Buna-N), 698 (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way -position, direct acting, spool type solenoid valve. This valve can be used in applications where the motion of a double acting cylinder or a motor needs to be reversed. Pressure drop Pressure Drop (psi) Flow - L/min (,8 cst C) B Flow - US gpm (5 SUS F) Pressure Drop (bar) - Port to port, port to port B - Port to port, port to port -8 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

183 SV7M-- - Solenoid valve -way, -position, spool type solenoid valve Up to 6 L/min ( USgpm) bar ( psi) Model code SV7 * * P **** **** * * ** ** Function SV7 - Solenoid valve Max flow M - 6 L/min ( USgpm) Size - size Seal material Blank - Buna-N M - Viton 5 Style P - way, push type manual override 6 Port size Code Port size Housing number 6G / BSPP T SE 657- H SE See section J for housing details. 7 Voltage rating - No coil D - VDC D - VDC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 8 Connector types W - Flying lead N - Deutsch male, DT-P, integrated For coil part numbers and dimensions see section C. 9 Coil types R - R series (W) Large ToughCoil Coil special feature Blank - Noil coil - No special feature Special features - None (Only required if valve has Special features omitted if.) SF - Soft shift Dimensions mm (inch) Torque cartridge in aluminum housing 8-95 Nm (6-7 ft lbs) NNote: When solenoid valve is ordered as, nut is included. Installation drawing 8,7 (.9) 5, (.98) 6.7 (.5),5 (.7) 5,9 (.8) Torque -6 LB-IN Manual Overdrive Torque -6 LB-IN Manual Overdrive 8.7 (.) 7. (.9).7 (.5) Hex.6 (.) 7 (5.) 8.9 (.) Slots 8.75 (.) 5.6 (.).5 HEX 8,9 (.).5 HEX 85, (.6) 6.5 (.5).8 (.5). (.) 88.9 (.5) 68.8 (.688).8 (.5).6 - Thread.6 - Thread Ø,8 (.95) Ø, (.87) Ø,6 (.8) SV7-- 9,9 (.58) SV7B-- Warning Maintain.5- Nm (.8-. ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

184 SV7M-- - Solenoid valve -way, -position, spool type solenoid valve Up to 6 L/min ( USgpm) 5 bar (5 psi) Operation In the de-energized position this valve allows flow between port to port and between port to port in both directions. In the energized position flow is allowed between port to port and between port to port in both directions. Features Hardened, ground and honed working parts to limit leakage. IP69K Large ToughCoil compatibility. Continuously rated. Compact design with low pressure drop. Rated pressure on all ports. Working pressure 5 bar. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports except port ) Typical application pressure at port Cartridge fatigue pressure (infinite life) Rated flow Internal leakage Temperature range Coil duty Fluids 5 bar (5 psi) bar ( psi) 5 bar (5 psi) 8 L/min ( USgpm) 5 cc/min (.5 in bar ( psi) - to C (- to 8 F) Continuos from 85% to % of nominal voltage C-- ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE, etc. Filtration Cleanliness code 8/6/ Standard housing materials Steel Weight including coil.68 kg (.5 lbs) Seal kit 6979 Buna-N), 698 (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a -way -position, direct acting, high pressure, spool type solenoid valve. This valve can be used in applications where the motion of a double acting cylinder or a motor needs to be reversed Pressure drop Pressure Drop (psi) Flow - L/min (,8 cst C) Flow - US gpm (5 SUS F) - Port to port, port to port B - Port to port, port to port B Pressure Drop (bar) -8 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

185 SV7M-- - Solenoid valve -way, -position, spool type solenoid valve Up to 6 L/min ( USgpm) 5 bar (5 psi) Model code SV7 * * P **** **** * * ** ** Function SV7 - Solenoid valve Max flow M - 8 L/min ( USgpm) Size - size Seal material Blank - Buna-N V - Viton 5 Style P - way, push type manual override 6 Port Size - Code Port size Housing number luminium Steel 6G / BSPP H SE H SE S6G / BSPP ST SE ST SE Voltage rating - No coil D - VDC D - VDC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 8 Connector types W - Flying lead N - Deutsch male, DT-P, integrated For coil part numbers and dimensions see section C. 9 Coil types R - R series (W) Large ToughCoil Coil Special Feature Blank - Noil coil - No special feature Special features - None (Only required if valve has Special features omitted if.) Dimensions mm (inch) Torque cartridge in aluminum housing 8-95 Nm (6-7 ft lbs) NNote: When solenoid valve is ordered as, nut is included. 8,7 (.9) 5, (.98) Installation drawing (Steel) 6.7 (.5),5 (.7) 5,9 (.8) Torque -6 LB-IN Manual Overdrive Torque -6 LB-IN Manual Overdrive 8.7 (.) 7. (.9).7 (.5) Hex.6 (.) 7 (5.) 8.9 (.) Slots 8.75 (.) 5.6 (.).5 HEX 8,9 (.).5 HEX 85, (.6) 6.5 (.5).8 (.5). (.) 88.9 (.5) 68.8 (.688).8 (.5).6 - Thread.6 - Thread Ø,8 (.95) Ø, (.87) Ø,6 (.8) SV7-- 9,9 (.58) SV7B-- Warning Maintain.5- Nm (.8-. ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

186 SV9-8-E - Solenoid valve -way, -position, screw-in cartridge, solenoid valve Up to L/min (.5 USgpm) Up to bar ( psi) B () (B) (P) (T) Operation In the de-energized (center) position, all ports are blocked. When solenoid is energized, flow is directed from port to port and from port to port. When solenoid B is energized, flow is directed from port to port and from port to port. Features Hardened, ground and honed working parts to limit leakage. IP69K ToughCoil compatibility. Continuously rated. Compact design with low pressure drop. Rated pressure on all ports. Sectional view Coil B Coil Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) bar ( psi) Cartridge fatigue pressure (infinite life) bar ( psi) Fatigue pressure, psi per NFP/T-6- R- Rated burst pressure, psi per NFP/T-6- R- Max flow. L/min (.5 USgpm) Temperature range - to C (- to 8 F) ll general purpose hydraulic fluids such as: Fluids MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Standard housing material luminum Weight including coil (. lbs) Seal kit (Buna-N), (Viton ) Internal leakage 6 cm /min ( in /min) bar ( psi) Viton is a registered trademark of E.I. DuPont *C coils must be used with a rectifying connector Endurance tested to million cycles at full rated flow and pressure. Description This is a way position, direct acting, spool type solenoid valve. ll ports closed in the de-energized position. This valve is ideal for small flow applications where an actuator needs to be moved in both directions and stopped in any position. Pressure drop 5 Pressure Drop - psi Flow - L/min (,8 cst 9 C) 8 B 7 Pressure Drop - bar Flow - USgpm (5 SUS F) - Port to port or port B - Port to port or port -86 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

187 SV9-8-F - Solenoid valve -way, -position, screw-in cartridge, solenoid valve Up to L/min (.5 USgpm) Up to bar ( psi) B () (B) (P) (T) Operation In the de-energized (center) position, port, port, and port are open to each other while port is blocked. When solenoid is energized, flow is directed from port to port and from port to port. When solenoid B is energized, flow is directed from port to port and from port to port. Features Hardened, ground and honed working parts to limit leakage. IP69K ToughCoil compatibility. Continuously rated. Compact design with low pressure drop. Rated pressure on all ports. Sectional view Performance data Ratings and specifications Coil B Coil Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) bar ( psi) Cartridge fatigue pressure (infinite life) bar ( psi) Fatigue pressure, psi per NFP/T-6- R- Rated burst pressure, psi per NFP/T-6- R- Max flow. L/min (.5 USgpm) Temperature range - to C (- to 8 F) Coil duty Continuous from 85% to % of nominal voltage Coil power W C-8- Fluids ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Standard Housing material luminum Weight including coil (. lbs) Seal kit (Buna-N), (Viton ) Internal leakage 6 cm /min ( in /min) bar ( psi) Viton is a registered trademark of E.I. DuPont Endurance tested to million cycles at full rated flow and pressure. Description This is a way position, direct acting, spool type solenoid valve. In the de-energized condition Port and are open to tank with the inlet port blocked. This valve is ideal for small flow applications where an actuator needs to be moved in both directions and stopped in any position while allowing the service ports to decay to tank pressure in the de-energized condition. Pressure drop Flow - L/min (,8 cst 9 C) 5 8 Pressure Drop - psi B C D 7 Pressure Drop - bar Flow - USgpm (5 SUS F) - Port or port de-energized B - Port to port or port to port C - Port or port de-energized D - Port or Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

188 SV9-8-B - Solenoid valve -way, -position, screw-in cartridge, solenoid valve Up to L/min (.5 USgpm) Up to bar ( psi) B () (B) (P) (T) Operation In the central de-energized position all ports are open. When solenoid '' is energized flow is allowed from port to port and port to port. When solenoid 'B' is energized flow is allowed from port to port and from port to port. Features Hardened, ground and honed working parts to limit leakage. IP69K ToughCoil compatibility. Continuously rated. Compact design with low pressure drop. Rated pressure on all ports. Sectional view Performance data Coil B Coil Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) bar ( psi) Cartridge fatigue pressure (infinite life) bar ( psi) Fatigue pressure, psi per NFP/T-6- R- Rated burst pressure, psi per NFP/T-6- R- Max flow. L/min (.5 USgpm) Temperature range - to C (- to 8 F) Coil duty Continuous from 85% to % of nominal voltage Coil power W C-8- Fluids ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Standard housing material luminum Weight including coil (. lbs) Seal kit (Buna-N), (Viton ) Internal leakage 6 cm /min ( in /min) bar ( psi) Viton is a registered trademark of E.I. DuPont Endurance tested to million cycles at full rated flow and pressure. Description This is a way position, direct acting, spool type solenoid valve. In the de-energized condition all ports are open to tank. This valve is ideal for small flow applications where an actuator needs to be moved in both directions. Pressure drop 5 Pressure Drop - psi Flow - L/min (,8 cst 9 C) 8 B 7 Pressure Drop - bar 5 C Flow - USgpm (5 SUS F) - Port or port to port Port to port de-energized B - Port to port or port C - Port or port Port or to de-energized -88 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

189 SV Solenoid valve -way, -position, screw-in cartridge, solenoid valve Up to L/min (.5 USgpm) bar ( psi) B () (B) (P) (T) Operation In the central de-energized position flow is allowed from inlet port to tank port and ports and are blocked When solenoid '' is energized flow is allowed from ports to and ports to. When solenoid 'B' is energized flow is allowed from port to port and from port to port. Features Hardened, ground and honed working parts to limit leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low pressure drop. Rated pressure on all ports. Sectional view "S" "S" Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) bar ( psi) Cartridge fatigue pressure (infinite life) bar ( psi) Fatigue pressure, psi per NFP/T-6- R- Rated burst pressure, psi per NFP/T-6- R- Max flow. L/min (.5 USgpm) Temperature range - to C (- to 8 F) Coil duty Continuous from 85% to % of nominal voltage Coil power W C-8- Fluids ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Standard housing material luminum Weight including coil (. lbs) Seal kit (Buna-N), (Viton ) Internal leakage 6 cm /min ( in /min) bar ( psi) Viton is a registered trademark of E.I. DuPont *C coils must be used with a rectifying connector Endurance tested to million cycles at full rated flow and pressure. Description This is a way position, direct acting, spool type solenoid valve. In the de-energized condition the inlet Port is open to tank with port and blocked. This valve is ideal for small flow applications where an actuator needs to be moved in both directions. In the de-energized condition inlet flow is allowed to tank. Pressure drop Flow - L/min (,8 cst 9 C) Pressure Drop - psi B 75 C Pressure Drop - bar Flow - USgpm (5 SUS F) - Port or port or port B - Port to port de-energized C - Port or port to port Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

190 SV9-8 - Solenoid valve -way, -position, screw-in cartridge, solenoid valve Up to L/min (.5 USgpm) Up to bar ( psi) Model code SV9 8 * * * * ** **** * P Function SV9 - Solenoid valve Spool center condition () (B) B () (B) 8 Voltage rating - No coil D - VDC Size 8-8 size Seal material N - Buna-N V - Viton B (P) (T) B (P) (T) E F () (B) () (B) D - VDC 6D - 6VDC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 5 Manual override option - No manual override M - Manual override For valve dimensions with manual override, see pages Housing Material - - luminum S - Steel B (P) (T) B (P) (T) 7 Port sizes Code Port size Housing number luminium Steel G / BSPP G /8 BSPP T SE T SE See section J for housing details. 9 Connector types - No coil G - ISO DIN 65 Q - Spade terminals N - Deutsch male W - Leadwire C - Deutch on Leads H - Metripak 5 on Leads F - Weatherpak Male on Leads Y - mp JR D - Metripack 5 male J - Metripack 8 male Coil series - No Coil P - 8 series, W Coil special features - None Valve Special features - None (Only required if valve has Special features omitted if.) These model digits are not stamped on the valve. -9 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

191 SV9-8 - Solenoid valve -way, -position, screw-in cartridge, solenoid valve Up to L/min (.5 USgpm) bar ( psi) Dimensions mm (inch) 6, (.) 6, (.) Torque cartridge in aluminum or steel housing - Nm (5- ft. lbs.) Valve is shown with W coil. See other coils in Section C. NNote: When solenoid valve is ordered as, coil nut and coil spacer included. When solenoid valve is ordered without coils, it will be supplied with coil spacer and coil nut. This valve uses the P series, 8 size, W coil. Ø,7 (.5) 97 (.8) "Coil B" Ø,7 (.5) 9,6 (.7) Manual override option Coil B Spare Parts Coil Nut Coil Spacer -867 "Coil " Coil Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. 5,6 (.5 ) 5,6 (.5) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

192 SV9-- - Solenoid valve -way, -position spool type solenoid valve Up to 9 L/min (5 USgpm) bar ( psi) B () (B) (P) (T) Operation In the de-energized position, this valve allows flow from port to port and blocks ports and. When solenoid (S) is energized, flow is directed from port to port and from port to port. When solenoid (S) is energized, flow is directed from port to port and from port to port. Sectional view "Coil B" "Coil " Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) bar ( psi) Cartridge fatigue pressure (infinite life) bar ( psi) Fatigue pressure, psi per NFP/T-6- R- Rated burst pressure (66 bar) 99 psi per NFP/T-6- R- Max flow 5 USgpm Temperature range - to C (- to 8 F) Coil duty Continuous from 85% to % of nominal voltage Coil power W C-- Fluids ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) luminum Weight including coil.95kg (. lbs) Seal kit (Buna-N), 5668 (Viton ) Internal leakage 6 cm /min (5 in /min) bar ( psi) Viton is a registered trademark of E.I. DuPont Endurance tested to million cycles at full rated flow and pressure. Description The SV9--B is a -way, -position, direct acting, spool type directional valve. Pressure drop Pressure Drop - psi B C - Port to port, de-energized B - Port to port, port to port C - Port to port, port to port Flow - USgpm (5 SUS F) 5-9 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

193 SV9--B - Solenoid valve -way, -position spool type solenoid valve Up to L/min (6 USgpm) bar ( psi) B () (B) (P) (T) Operation In the de-energized position, all ports are open to each other When solenoid (S) is energized, flow is directed from port to port and from port to port. When solenoid (S) is energized, flow is directed from port to port and from port to port. Sectional View view Performance data "Coil B" "Coil " Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) bar ( psi) Cartridge fatigue pressure (infinite life) bar ( psi) Fatigue pressure, psi per NFP/T-6- R- Rated burst pressure (66 bar) 99 psi per NFP/T-6- R- Max flow 6 USgpm Temperature range - to C (- to 8 F) Coil duty Continuous from 85% to % of nominal voltage Coil power 6W C-- Fluids ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) luminum Weight including coil.95 Kg (. lbs) Seal kit Buna-N, 5668 (Viton ) Internal leakage 6 cm /min (5 in /min) bar ( psi) Viton is a registered trademark of E.I. DuPont Endurance tested to million cycles at full rated flow and pressure. Description The SV9--B is a -way, -position, direct acting, spool type directional valve. Pressure drop Pressure Drop - psi B C D E 5 6 Flow - USgpm (5 SUS F) - Port to port, de-energized B - Port to port, port to port C - Port to port, port to port, de-energized D - Port to port B - Port to port Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

194 SV9--E - Solenoid valve -way, -position spool type solenoid valve Up to L/min (6 USgpm) bar ( psi) B () (B) (P) (T) Operation In the de-energized (center) position, all ports are blocked. When solenoid (S) is energized, flow is directed from port to port and from port to port. When solenoid (S) is energized, flow is directed from port to port and from port to port. Sectional view "Coil B" "Coil " Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) bar ( psi) Cartridge fatigue pressure (infinite life) bar ( psi) Fatigue pressure, psi per NFP/T-6- R- Rated burst pressure (66 bar) 99 psi per NFP/T-6- R- Max flow 6 USgpm Temperature range - to C (- to 8 F) Coil duty Continuous from 85% to % of nominal voltage Coil power 6W C-- Fluids ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) luminum Weight including coil.95 Kg (. lbs) Seal kit (Buna-N), 5668 (Viton ) Internal leakage 6 cm /min (5 in /min) bar ( psi) Viton is a registered trademark of E.I. DuPont Endurance tested to million cycles at full rated flow and pressure. Description The SV9--E is a -way, -position, direct acting, spool type directional valve. Pressure drop Pressure Drop - psi B - Port to port, port to port B - Port to port, port to port 5 Flow - USgpm (5 SUS F) 6-9 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

195 SV9--F - Solenoid valve -way, -position spool type solenoid valve Up to L/min (6 USgpm) bar ( psi) B () (B) (P) (T) Operation In the de-energized (center) position, port, port, and port are open to each other while port is blocked. When solenoid (S) is energized, flow is directed from port to port and from port to port. When solenoid (S) is energized, flow is directed from port to port and from port to port. Sectional view Performance data "Coil B" "Coil " Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) bar ( psi) Cartridge fatigue pressure (infinite life) bar ( psi) Fatigue pressure, psi per NFP/T-6- R- Rated burst pressure (66 bar) 99 psi per NFP/T-6- R- Max flow 6 USgpm Temperature range - to C (- to 8 F) Coil duty Continuous from 85% to % of nominal voltage Coil power 6W C-- Fluids ll general purpose hydraulic fluids such as: MIL-H-566, SE, SE etc. Filtration Cleanliness code 8/6/ Housing material (standard) luminum Weight including coil.95 Kg (. lbs) Seal kit (Buna-N), 5668 (Viton ) Internal leakage 6 cm /min (5 in /min) bar ( psi) Viton is a registered trademark of E.I. DuPont Endurance tested to million cycles at full rated flow and pressure. Description The SV9--F is a -way, -position, direct acting, spool type directional valve. Pressure drop Port to port, port to port B - Port to port, port to port Pressure Drop - psi 8 6 B 5 Flow - USgpm (5 SUS F) 6 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

196 SV9- - Solenoid valve -way, -position spool type solenoid valve Up to L/min (6 USgpm) bar ( psi) Model code SV9 * * * * ** **** * J Function SV9 - Solenoid valve Size - size Seal material Blank - Buna-N V - Viton 5 Manual override option Blank - No manual override M - Manual override 6 Housing material - - luminum S - Steel E Spool center condition () (B) B (P) (T) B (P) (T) () (B) 7 Port sizes B F () (B) () (B) B (P) (T) B (P) (T) Code Port size Housing number Blank luminium light duty B /8 BSPP luminium fatigue rated G / BSPP G /8 BSPP H SE H SE T SE See section J for housings. 8 Voltage rating - No coil D - VDC D - VDC 6D - 6VDC - VC 5-5VC - VC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 9 Connector types G - ISO DIN 65 Q - Spade terminals W - Leadwire N - Deutsch Y - mp JR D - Metripack 5 male J - Metripack 8 male Coil series Blank - No Coil J - series, W Coil special features Blank - None Valve Special features - None (Only required if valve has Special features omitted if.) These model digits are not stamped on the valve. -96 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

197 SV9- - Solenoid valve Dimensions mm (inch) Torque cartridge in aluminum or steel housing - Nm (5- ft. lbs.) Valve is shown with W coil. See other coils in Section C. NNote: When solenoid valve is ordered as, coil nut is included. When solenoid valve is ordered without coils, it will be supplied with only the nut. The spacer must be ordered separately. This valve uses the J series, W coil. Spare parts Coil nut Coil spacer -796 Warning Maintain 5-8 Nm (-6 ft. lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. 9,6 (.6) 9,6 (.6) Ø 8,9 (.5) "Coil B" Ø 8,9 (.5) Manual override option "Coil " (.57) (5.) "Coil " "Coil " 6.8 (.) 6.8 (.) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

198 SV9M--E - Solenoid valve -way, -position spool type solenoid valve Up to 5 L/min (6.5 USgpm) bar ( psi) B () (B) (P) (T) Operation In the de-energized position all ports are closed. When solenoid '' is energized flow is allowed from port to port and port to port. When solenoid 'B' is energized flow is allowed from port to port and from port to port. Features Hardened, ground and honed working parts to limit leakage. IP69K Large ToughCoil compatibility. Continuously rated. Compact design with low pressure drop. Rated pressure on all ports. Sectional view Performance data Ratings and specifications Coil B Coil Figures based on Viscosity cst (5 SSU) Max working pressure bar ( psi) Rated flow See performance graphs Nominal flow 5 L/min (6.5 USgpm) Internal leakage Less than ml/min past each land bar differential Temperature range - to + C (- to +8 F) C-- (See Section M) Electrical data See coil data sheet Torque cartridge into cavity Nm ( lbs ft) Mounting position Unrestricted Fluids ll general purpose hydraulic fluids such as MIL-H-566, SE, SE etc Seal material Viton with PTFE back up rings Filtration BS55/ Class 8/ (5 micron or better) Nominal viscosity range 5 to 5 cst Standard housing materials luminium alloy Coil weight. kg (.6 lbs) two per valve Cartridge weight.5 kg (.55 lbs) Seal kit SK (Nitrile) SKV (Viton) Viton is a registered trademark of E.I. DuPont *C coils must be used with a rectifying connector Description This is a way position, direct acting, spool type solenoid valve. ll ports closed in the de-energized position. This valve is ideal for small flow applications where an actuator needs to be moved in both directions and stopped in any position. Pressure drop Flow - L/min 65 5 Working pressure - psi B Flow - US gpm Working pressure - bar - Port to port or port B - Port to port or port -98 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

199 SV9M--F - Solenoid valve -way, -position spool type solenoid valve Up to 5 L/min (6.5 USgpm) bar ( psi) B () (B) (P) (T) Operation In the de-energized (center) position, port, port, and port are open to each other while port is blocked. When solenoid is energized, flow is directed from port to port and from port to port. When solenoid B is energized, flow is directed from port to port and from port to port. Features Hardened, ground and honed working parts to limit leakage. IP69K Large ToughCoil compatibility. Continuously rated. Compact design with low pressure drop. Rated pressure on all ports. Sectional view Coil B Coil Coil Performance data Ratings and specifications Figures based on Viscosity cst (5 SSU) Max working pressure bar ( psi) Rated flow See performance graph Nominal flow 5 L/min (6.5 USgpm) Internal leakage Less than ml/min past each land bar differential Temperature range - to + C (- to +8 F) C-- (See Section M) Electrical data See coil data sheet Torque cartridge into cavity Nm ( lbs ft) Mounting position Unrestricted Fluids ll general purpose hydraulic fluids such as MIL-H-566, SE, SE etc Seal material Standard nitrile with PTFE back up rings Filtration BS55/ Class 8/ (5 micron or better) Nominal viscosity range 5 to 5 cst Standard housing materials luminium alloy Coil weight. kg (.6 lbs) two per valve Cartridge weight.5 kg (.55 lbs) Seal kit SK (Nitrile) SKV (Viton) Viton is a registered trademark of E.I. DuPont Description This is a way position, direct acting, spool type solenoid valve. In the de-energized condition Port and are open to tank with the inlet port blocked. This valve is ideal for small flow applications where an actuator needs to be moved in both directions and stopped in any position while allowing the service ports to decay to tank pressure in the de-energized condition. Pressure drop Pressure - psi Flow - L/min Flow - US gpm - Spool shifted port -, port - and port - and port - B - Spool centered port -, port - and port - and port - B 9 6 Pressure - bar Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

200 SV9M--B - Solenoid valve -way, -position spool type solenoid valve Up to L/min (8.9 USgpm) bar ( psi) B () (B) (P) (T) Operation In the de-energized position all ports are open. When solenoid '' is energized flow is allowed from port to port and port to port. When solenoid 'B' is energized flow is allowed from port to port and from port to port. Features Hardened, ground and honed working parts to limit leakage. IP69K Large ToughCoil compatibility. Continuously rated. Compact design with low pressure drop. Rated pressure on all ports. Sectional view Performance data Ratings and specifications Coil B Coil Figures based on Viscosity cst (5 SSU) Max working pressure bar ( psi) Rated flow See performance graphs Nominal flow L/min (8.9 USgpm) Internal leakage Less than ml/min past each land bar differential Temperature range - to + C (- to +8 F) C-- (See Section M) Electrical data See coil data sheet Torque cartridge into cavity Nm ( lbs ft) Mounting position Unrestricted Fluids ll general purpose hydraulic fluids such as MIL-H-566, SE, SE etc Seal material Standard nitrile with PTFE back up rings Filtration BS55/ Class 8/ (5 micron or better) Nominal viscosity range 5 to 5 cst Standard housing materials luminium alloy Coil weight. kg (.6 lbs) two per valve Cartridge weight.5 kg (.55 lbs) Seal kit SK (Nitrile) SKV (Viton) Viton is a registered trademark of E.I. DuPont Description This is a way position, direct acting, spool type solenoid valve. In the de-energized condition all ports are open to tank. This valve is ideal for small flow applications where an actuator needs to be moved in both directions. Pressure drop Flow - L/min Pressure - psi B 9 6 Pressure - bar Flow - US gpm - Spool shifted port -, port - and port - and port - B - Spool centered port - and port - - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

201 SV9M-- - Solenoid valve -way, -position spool type solenoid valve Up to 5 L/min (6.5 USgpm) bar ( psi) B () (B) (P) (T) Operation In the central de-energized position. Flow is allowed from inlet port to port and ports and are blocked. When solenoid 'B' is energized flow is allowed from port to and port to. When solenoid '' is energized flow is allowed from port to port and from port to port. Features Hardened, ground and honed working parts to limit leakage. IP69K Large ToughCoil compatibility. Continuously rated. Compact design with low pressure drop. Rated pressure on all ports. Sectional view Performance data Ratings and specifications Coil B Coil Figures based on Viscosity cst (5 SSU) Max working pressure bar ( psi) Rated flow See performance graph Nominal flow 5 L/min (6.5 USgpm) Internal leakage Less than ml/min past each land bar differential Temperature range - to + C (- to +8 F) C-- (See Section M) Electrical data See coil data sheet Torque cartridge into cavity Nm ( lbs ft) Mounting position Unrestricted Fluids ll general purpose hydraulic fluids such as MIL-H-566, SE, SE etc Seal material Standard nitrile with PTFE back up rings Filtration BS55/ Class 8/ (5 micron or better) Nominal viscosity range 5 to 5 cst Standard housing materials luminium alloy Coil weight. kg (.6 lbs) two per valve Cartridge weight.5 kg (.55 lbs) Seal kit SK (Nitrile) SKV (Viton) Viton is a registered trademark of E.I. DuPont Description This is a way position, direct acting, spool type solenoid valve. In the de-energized condition the inlet Port is open to tank with port and blocked. This valve is ideal for small flow applications where an actuator needs to be moved in both directions. In the de-energized condition inlet flow is allowed to tank. Pressure drop 9 Pressure Drop - psi B C - Port to port, de-energized B - Port to port, port to port C - Port to port, port to port Flow - USgpm (5 SUS F) 5 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 -

202 SV9M- - Solenoid valve -way, -position spool type solenoid valve Up to L/min (8.5 USgpm) bar ( psi) Dimensions mm (inch) NNote: When solenoid valve is ordered as cartridge Coil nut is included. Torque cartridge in luminum or steel housing - 6 Nm ( - ft lbs). Torque Coil Nut Torque 5-7 Nm ( - 5 ft lbs) When solenoid valve is ordered without coils, it will be supplied with the nut. This valve uses the L series, W coil. Spare parts Coil nut 658- Installation drawing (Steel).75 (.86) 9.5 (.9). /F. (.).5 (.7) 6.5 (.5). (5.) 5.7 (.5) 5.7 (.5).5 (.6) holes Ø7. (.8) thro 6.5 (.5) 7. (.88).8 (.5) 5.8 (.) 5.5 (.99) 8.5 (.7) 6. (.6) 8.6 (.5).8 (.5) 6.5 (.6) 7. /F 7/8 --UNF-.5 (.9) Ø5.8 (.6) Ø7. (.68) Ø9. (.75) - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

203 SV9M- - Solenoid valve -way, -position spool type solenoid valve Up to L/min (8.5 USgpm) bar ( psi) Model code SV9 * * * * ** **** * L Function SV9M - Solenoid valve Size - size Seal material N - Buna-N V - Viton 5 Manual override option - No manual override M - Manual override For valve dimensions with manual override, see pages Housing material - - luminum Spool center condition B () (B) () (B) B (P) (T) B (P) (T) E F () (B) () (B) B (P) (T) B (P) (T) 7 Port sizes Code Port size Housing number luminium G /8 BSP B9 G / BSP B98 8T / SE B99 8 Voltage rating - No coil D - VDC D - VDC 6D - 6VDC B - VDC/w diode* B - VDC/w diode* *Optional arc suppression diode. 9 Connector types - No coil W - Leadwire N - Deutsch male, DT-P, integrated Coil series - No Coil L - series, 8W Large ToughCoil Coil special features - None Valve special features - None These model digits are not stamped on the valve. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 -

204 S Series - Manual overrides mm Tube S Series Consult factory for availability Screw, normally closed manual override - type /F (.) (.6) Nut type dependant on valve Manually operated position Normal position vailable for S7, S9 Push manual override - type Flush Push to manually override Flush. (.) Nut type dependant on valve.5 (.) Nut type dependant on valve Push to manually override vailable for S7 Push to manually override vailable for S9 - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

205 S Series - Manual overrides 6 mm tube S5 Series Consult factory for availability Screw manual override - Type Ø.5 (.57). (.8) Nut type dependent on valve 6.5 (.) Manually operated position vailable for: S5, S5, S55, S56, S5, S5 Normal position Push/pull manual override - Type M Ø. (.) knob.5 (.59). /F Hex. /F Hex 6.5 (.8) Ø. (.9) nut Normal position vailable for: SV9--, SV9--B, SV9--E, SV9--F, SV9--G Pulled out Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

206 Manual override options Push type overrides (type P and S) NNote: Manual override is available on all solenoid cartridge valves, except SBV series valves. Warning The Manual override option is intended for emergency use, not for continuous duty operation. Manual override S screw type 9. (.6) Neutral 7. (.8) ctivated,7 (.) To overrides:. Turn the override button clockwise until it stops. 9. (.6) Neutral 7. (.8) ctivated,7 (.). The override button will remain activated until the override button is turned counterclockwise. 6, (.) 9, (.5) ctivated,7 (.) To releases:. Turn the override button counterclockwise until it stops., (.96),7 (.) 9.7 (.96) 9.7 (.96) 7, (.77) 57,9 (.8) 8-Series bar valves 8-Series 5 bar valves,, 6, -Series bar valves,, 6, -Series 5 bar valves Manual override P push type. (.8) Neutral 9. (.76) ctivated 8,7 (.) To overrides:. Push the override button to stop and hold.. (.8) Neutral 9. (.76) ctivated 8,7 (.) To releases:. Remove pressure from the override button. 8, (.7), (.8) ctivated 8,7 (.) 6, (.6) 8,7 (.) 9.7 (.96) 9.7 (.96) 7, (.77) 57,8 (.8) 8-Series bar valves 8-Series 5 bar valves,, 6, -Series bar valves,, 6, -Series 5 bar valves Manual override P & S options are available on the following modelss: SV--OP/OS-- SV--OP/OS-- SV-6-OP/OS-- SV--OP/OS-- SV5--OP/OS-- SV5-8-OP/OS-- SV--OP-- SV--OS-- SV--OP-- SV--OS-- SV-6-OP-- SV-6-OS-- SV--OP-- SV--OS-- SV-8-CM-- SV-8-OP-- SV-8-OS-- SV--P-- SV--S-- SV-8-P-- SV5--OP-- SV5--OS-- SV5-8-OP-- SV5-8-OS-- SV7--P-- SV7--S-- -6 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8

207 Warning The Manual override option is intended for emergency use, not for continuous duty operation. NNote: Manual override is available on all solenoid cartridge valves, except SBV series valves. Manual override options Pull type overrides (type M and R) Manual override M pull type To overrides:. Pull up knob until the override tooth is completely out of the detent base.. Turn the knob clockwise until the override tooth is resting securely on top of the detent base slot. To releases:. Pull up knob slightly from surface.. Turn the knob clockwise until the override tooth is securely engaged in slot of the detent base..7 (.5) Neutral.5 (.6) ctivated,8 (.5) 5. (.) 8-Series bar and 5 bar values 57,8 (.7), (.96) 7, (.7) ctivated,8 (.5),,6, -Series bar and 5 bar values Manual override R cable type (not available on size 8 models), (.96) 7, (.7) ctivated,6 (.) /8 UNF 57,8 (.7) Manual override M options are available on the following modelss: SBV-8-CM-- SBV-8-CM-- SV--M-- SV--M-- SV--CM-- SV--M-- SV--M-- SV--CM-- SV-6-CM-- SV-8-M-- SV-8-M-- SV--CM-- SV-8-M-- SV--CM-- SV--CM-- SV-6-CM-- SV--CM-- SV--CM-- SV--OM-- SV-8-CM-- SV-8-OM-- SV5-8-CM-- SV-8-M-- SV-8-M-- SV--M-- SV--CM-- SV--CM-- SV-8-M-- SV--M-- SV--CM-- SV--CM-- SV--M-- SV--CM-- SV--OM-- SV-8-CM-- SV-8-OM-- SV5--M-- SV5-8-CM-- Manual override R options are available on the following modelss: SV--R-- SV--R-- SV--CR-- SV--R-- SV--CR-- SV--R-- SV--CR-- SV--R-- SV--CR-- SV--OR-- SV5--R-- SV--CR-- SV-6-CR-- SV--CR-- Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January

208 - dditional products, product lines, and services offered by Eaton - Versatile, Proven, Best Value Sectional Design for Multiple Configurations Same day solutions with our Build Kit Program! MDG Mobile Valve Eaton s MDG mobile directional control valve uses a modular, versatile design based on our proven Vickers DGV design. Eaton MDG valves, truly designed for mobile applications, offer the traditional benefits of a stackable mobile valve and provide further value as circuit options for mobile manifold systems. This same versatility and flexibility applies to system applications, making it your best value for customized, multi-functional circuits. For more information, contact your local Eaton distributor, call us at or visit us on the web at: