Direct solenoid and solenoid pilot operated valves

Size: px

Start display at page:

Download "Direct solenoid and solenoid pilot operated valves"

Chester Sanders
6 years ago
Views:

1 Direct solenoid and solenoid pilot operated valves Individual mounting Series inline sub-base non plug-in Manifold mounting 35 stacking sub-base non plug-in sub-base with pressure regulators sub-base with pressure regulators and flow controls 100 Epoxy encapsulated solenoid Spring biased moveable pole piece Manual operator rmature Push pin onded balanced poppets 900 Spring return SERIES FETURES Single and double solenoid or remote air. The patented MCSOLENOID for fastest possible response times. onded balanced poppets for high flow, precise repeatability, and consistent operation. alanced poppet design permits versatility in pipping. Valves can be piped as 4-way, 3-way or 2-way, normally closed or normally open or can be used for vacuum, diverter or selector applications. Use on lube or non-lube service. Extremely high cycle rates. Extremely long service life due to unique poppet cushions. Manual overrides as standard. Various solenoid enclosures and plug-in connectors Optional surge suppression available. Low wattage DC solenoids down to 1.8 watts. Patented MCSOLENOID virtually burn-out proof on C service ISO 1 ISO 2 ISO 3 MC 125 MC 250 MC Consult Precautions page 356 before use, installation or service of MC Valves.

2 100% 100% WRRNTY 18 O F P R O D U C T I O N T E S T E D 100% MONTHS VLVE CONFIGURTIONS VILLE 2-position single and double solenoid or remote air. Single pressure (4 or 5 ports) Individual, stacking and manifold base mounted models. Integral individual exhaust flow controls with common exhaust port. Integral regulators and flow controls on manifolds. SPECIL PPLICTIONS : The balanced poppet design facilities using the same valve for many functions and can be used for pressure, vacuum or plugged without the necessity of changing any parts. Pipping suggestions are shown in the chart below. -PLUGGED X -PLUGGED X 4-WY 3-WY NORMLLY CLOSED 3-WY NORMLLY OPEN -PLUGGED X -PLUGGED X -PLUGGED 2-WY NORMLLY CLOSED X X X -PLUGGED 2-WY NORMLLY OPEN -PLUGGED DIVERTER Operator De-Energized -PLUGGED X Operator Energized PRESS OR VC PRESS OR VC SELECTOR "" CN E USED S SELECTOR PORT OUTLET IF DESIRED 66 Consult Precautions page 356 before use, installation or service of MC Valves.

Direct solenoid and solenoid pilot operated valves Function Flow (Max) Individual mounting Series 4/2 #10-32 - 1/8 0.15 C v inline OPERTIONL ENEFITS 1.

3 Direct solenoid and solenoid pilot operated valves Function Flow (Max) Individual mounting Series 4/2 # / C v inline OPERTIONL ENEFITS 1. alanced poppet, immune to variations of pressure. 2. Short stroke with high flow. 3. The patented solenoid develops high shifting forces. 4. Powerful return spring. 5. Manual operator standard on all valves. 6. urn-out proof solenoid on C service HOW TO ORDER (Minimum DC wattage 5.4W) /8 NPTF 45-1-DXXX-XXX 45-1-DXXX-XXX 45-G1-DXXX-XXX 45-G1-DXXX-XXX 45 WITH TEGRTED FLOW CONTROLS 1/8 NPTF SOLENOID OPERTOR 45-2-DXXX-XXX 45-2-DXXX-XXX XX Voltage X Wire length X Manual operator XX 120/60, 110/50 240/60, 220/50 C 24/60, 24/50 F 24 VDC (1.8 W) D 24 VDC (5.4 W) DF 24 VDC (12.7 W) * Other options available, see page 353. OTTOM PORT OPTIONS 45-XXX-D XXX-XXX (O RG MOUNT) J D-Sgl. oper. - ll ports F-Sgl. oper. - & ports H-Dbl. oper. - ll ports J-Dbl. oper. - & ports 18 (Flying leads) Connector D XX X- X XX * 1 Non-locking 2 Locking (Minimum DC wattage 5.4W) 45-G2-DXXX-XXX 45-G2-DXXX-XXX K KD J JD Electrical connection Square connector Square connector with light Rectangular connector Rectangular connector with light Flying leads ISO 1 ISO 2 ISO 3 MC 125 MC 250 MC Consult Precautions page 356 before use, installation or service of MC Valves.

4 100% 100% WRRNTY 18 O F P R O D U C T I O N T E S T E D 100% MONTHS TECHNICL DT Fluid : Pressure range : Lubrication : Filtration : Temperature range : Flow (at 6 bar, ΔP=1bar) : Leak rate : Coil : Voltage range : Protection : Power : Response times : Compressed air, vacuum, inert gases Vacuum to 120 PSI Not required, if used select a medium aniline point lubricant (between 180 F and 210 F) 40 µ 0 F to 120 F (-18 C to 50 C) 1.8 W : (0.1 C v ), 5.4 W : (0.15 C v ) 100 cm 3 /min General purpose class, continuous duty, encapsulated -15% to +10% of nominal voltage Consult factory Inrush : 10.9 V Holding : 7.7 V = 1.8 to 12.7 W 24 VDC (5.4 W) Energize : 6 ms De-energize : 2 ms 120/60 Energize : 3-8 ms De-energize : 2-7 ms Spare parts : Options : Solenoid operator (power 5.4 W) : DXXX-XXX, including mounting screws Seal (between solenoid and valve body) : Valve cover plate with flow controls : N SPP threads. High flow up to 0.23 C v, according to wattage and high flow Mod. NMUR interface - 45-F1DXXX-XXX and required NMUR adapter kit: N (for 3-way operation) - N (for 4-way operation). DIMENSIONS Dimensions shown are metric (mm) 62,0 F G 33,5 E H 27,5 24,5 22,5 EX D C 9,0 18,0 16,0 10,0 32,5 3,5 15,0 EX 30,0 23,5 6,5 C D E F G H 9,5 Ø 3,4 1/8 NPTF ,5 13,8 68 Consult Precautions page 356 before use, installation or service of MC Valves.

Direct solenoid and solenoid pilot operated valves Function Flow (Max) Individual mounting Series 4/2 #10-32 - 1/8 0.13 C v sub-base non plug-in OPERTIONL ENEFITS 1.

5 Direct solenoid and solenoid pilot operated valves Function Flow (Max) Individual mounting Series 4/2 # / C v sub-base non plug-in OPERTIONL ENEFITS 1. alanced poppet, immune to variations of pressure. 2. Short stroke with high flow. 3. The patented solenoid develops high shifting forces. 4. Powerful return spring. 5. Manual operator standard on all valves. 6. urn-out proof solenoid on C service HOW TO ORDER (Minimum DC wattage 5,4W) Valve less base 1/8 NPTF base 45-L00-DXXX-XXX 45-L-DXXX-XXX 45-N00-DXXX-XXX 45-N-DXXX-XXX 45 #10-32 UNF base 45-L-DXXX-XXX 45-N-DXXX-XXX WITH TEGRTED FLOW CONTROLS (Minimum DC wattage 5,4W) Valve less base 1/8 NPTF base #10-32 UNF base SOLENOID OPERTOR 45-L00-DXXX-XXX 45-L-DXXX-XXX 45-L-DXXX-XXX XX Voltage X Wire length X Manual operator XX 120/60, 110/50 240/60, 220/50 C 24/60, 24/50 F 24 VDC (1.8 W) D 24 VDC (5.4 W) DF 24 VDC (12.7 W) * Other options available, see page 353. OPTIONS 45-L-D XXX-XXX J 18 (Flying leads) Connector Substitute J for 1/8 bottom cylinder ports D XX X- X XX * 1 Non-locking 2 Locking 45-N00-DXXX-XXX 45-N-DXXX-XXX 45-N-DXXX-XXX K KD Electrical connection Square connector Square connector with light Flying leads ISO 1 ISO 2 ISO 3 MC 125 MC 250 MC Consult Precautions page 356 before use, installation or service of MC Valves.

6 100% 100% WRRNTY 18 O F P R O D U C T I O N T E S T E D 100% MONTHS TECHNICL DT Fluid : Pressure range : Lubrication : Filtration : Temperature range : Flow (at 6 bar, ΔP=1bar) : Leak rate : Coil : Voltage range : Protection : Power : Response times : Compressed air, vacuum, inert gases Vacuum to 120 PSI Not required, if used select a medium aniline point lubricant (between 180 F and 210 F) 40 µ 0 F to 120 F (-18 C to 50 C) 1.8 W : (0.11 C v ), 5.4 W : (0.13 C v ) 100 cm 3 /min General purpose class, continuous duty, encapsulated -15% to +10% of nominal voltage Consult factory Inrush : 10.9 V Holding : 7.7 V = 1.8 to 12.7 W 24 VDC (5.4 W) Energize : 6 ms De-energize : 2 ms 120/60 Energize : 3-8 ms De-energize : 2-7 ms Spare parts : Options : Solenoid operator (power 5.4 W) : DXXX-XXX, including mounting screws Seal (between solenoid and valve body) : Seal between base and valve : Flow control : N SPP threads. High flow up to 0.20 C v, according to wattage and high flow mod. DIMENSIONS Dimensions shown are metric (mm) 4.5 DI. (2) places C L 1/8 NPTF OPTIONL OTTOM CYLDER PORTS OPTIONL PRESSURE SENSG PORT 21,5 4,0 E E 5,0 7,0 ~ , ,0 24,0 9,0 6,5 25,0 50,0 E 50 E 79,1 D E E 13,0 32,0 C 64,0 C 15,1 32,0 16,0 1/8 NPTF C D Consult Precautions page 356 before use, installation or service of MC Valves.

Direct solenoid and solenoid pilot operated valves Function Flow (Max) Manifold mounting Series 4/2 # 10-32 - 1/8 0.20 C v stacking OPERTIONL ENEFITS 1.

7 Direct solenoid and solenoid pilot operated valves Function Flow (Max) Manifold mounting Series 4/2 # / C v stacking OPERTIONL ENEFITS 1. alanced poppet, immune to variations of pressure. 2. Short stroke with high flow. 3. The patented solenoid develops high shifting forces. 4. Powerful return spring. 5. Manual operator standard on all valves. 6. urn-out proof solenoid on C service HOW TO ORDER (Minimum DC wattage 5,4W) /8 NPTF 45-S1-DXXX-XXX 45-S1-DXXX-XXX 45-T1-DXXX-XXX 45-T1-DXXX-XXX 45 WITH TEGRTED FLOW CONTROLS 1/8 NPTF SOLENOID OPERTOR 45-S2-DXXX-XXX 45-S2-DXXX-XXX XX Voltage X Wire length X Manual operator XX 120/60, 110/50 240/60, 220/50 C 24/60, 24/50 F 24 VDC (1.8 W) D 24 VDC (5.4 W) DF 24 VDC (12.7 W) * Other options available, see page 353. End plate kit required ( 1/4 NPTF) : M J 18 (Flying leads) Connector D XX X- X XX * 1 Non-locking 2 Locking 45-T2-DXXX-XXX 45-T2-DXXX-XXX K KD Electrical connection Square connector Square connector with light Flying leads ISO 1 ISO 2 ISO 3 MC 125 MC 250 MC Consult Precautions page 356 before use, installation or service of MC Valves.

8 100% 100% WRRNTY 18 O F P R O D U C T I O N T E S T E D 100% MONTHS TECHNICL DT Fluid : Pressure range : Lubrication : Filtration : Temperature range : Flow (at 6 bar, ΔP=1bar) : Leak rate : Coil : Voltage range : Protection : Power : Response times : Compressed air, vacuum, inert gases Vacuum to 120 PSI Not required, if used select a medium aniline point lubricant (between 180 F and 210 F) 40 µ 0 F to 120 F (-18 C to 50 C) 1.8 W : (0.14 C v ), 5.4 W : (0.2 C v ) 100 cm 3 /min General purpose class, continuous duty, encapsulated -15% to +10% of nominal voltage Consult factory Inrush : 10.9 V Holding : 7.7 V = 1.8 to 12.7 W 24 VDC (5.4 W) Energize : 6 ms De-energize : 2 ms 120/60 Energize : 3-8 ms De-energize : 2-7 ms Spare parts : Options : Solenoid operator (power 5.4 W) : DXXX-XXX, including mounting screws Seal (between solenoid and valve body) : Seal between valves : Tie-rod (x2) : Valve cover plate with flow controls : N Inlet & exhaust isolator : N Inlet isolator : N Exhaust isolator : N SPP threads. High flow up to 0.3 C v, according to wattage and high flow mod. DIMENSIONS Dimensions shown are metric (mm) 32,5 7,0 ± 0,2 4 Ø 5,3 EX 62,5 15,5 EX 9,5 9,95 39,0 18,5 17,0 49,0 54,0 16,0 8,0 7,5 9,5 4,0 1/8 NPTF CYLDER PORTS 19,2 (± 0,1) 16,0 12,0 ± 0,2 CYLDER PORTS 1/4 &. NPTF EX EX 44,0 62,5 72 Consult Precautions page 356 before use, installation or service of MC Valves.

Direct solenoid and solenoid pilot operated valves Function Flow (Max) Manifold mounting Series 4/2 # 10-32 - 1/8 0.11 C v sub-base non plug-in OPERTIONL ENEFITS 1.

9 Direct solenoid and solenoid pilot operated valves Function Flow (Max) Manifold mounting Series 4/2 # / C v sub-base non plug-in OPERTIONL ENEFITS 1. alanced poppet, immune to variations of pressure. 2. Short stroke with high flow. 3. The patented solenoid develops high shifting forces. 4. Powerful return spring. 5. Manual operator standard on all valves. 6. urn-out proof solenoid on C service HOW TO ORDER (Minimum DC wattage 5.4W) Valve less base 1/8 NPTF base 45-L00-DXXX-XXX 45-LC-DXXX-XXX 45-N00-DXXX-XXX 45-NC-DXXX-XXX 45 base 45-LC-DXXX-XXX 45-NC-DXXX-XXX WITH TEGRTED FLOW CONTROLS Valve less base 1/8 NPTF base base SOLENOID OPERTOR 45-L00-DXXX-XXX 45-LD-DXXX-XXX 45-LD-DXXX-XXX XX Voltage X Wire length X Manual operator XX 120/60, 110/50 240/60, 220/50 C 24/60, 24/50 F 24 VDC (1.8 W) D 24 VDC (5.4 W) DF 24 VDC (12.7 W) * Other options available, see page 353. End plate kit required ( 1/4 NPTF) : M J 18 (Flying leads) Connector D XX X- X XX * 1 Non-locking 2 Locking (Minimum DC wattage 5.4W) 45-N00-DXXX-XXX 45-ND-DXXX-XXX 45-ND-DXXX-XXX K KD Electrical connection Square connector Square connector with light Flying leads ISO 1 ISO 2 ISO 3 MC 125 MC 250 MC Consult Precautions page 356 before use, installation or service of MC Valves.

10 100% 100% WRRNTY 18 O F P R O D U C T I O N T E S T E D 100% MONTHS TECHNICL DT Fluid : Pressure range : Lubrication : Filtration : Temperature range : Flow (at 6 bar, ΔP=1bar) : Leak rate : Coil : Voltage range : Protection : Power : Response times : Compressed air, vacuum, inert gases Vacuum to 120 PSI Not required, if used select a medium aniline point lubricant (between 180 F and 210 F) 40 µ 0 F to 120 F (-18 C to 50 C) 1.8 W : (0.09 C v ), 5.4 W : (0.11 C v ) 100 cm 3 /min General purpose class, continuous duty, encapsulated -15% to +10% of nominal voltage Consult factory Inrush : 10.9 V Holding : 7.7 V = 1.8 to 12.7 W 24 VDC (5.4 W) Energize : 6 ms De-energize : 2 ms 120/60 Energize : 3-8 ms De-energize : 2-7 ms Spare parts : Options : Solenoid operator (power 5.4 W) : DXXX-XXX, including mounting screws Seal (between solenoid and valve body) : Seal between base and valve : Seal between bases : Tie-rod (x2) : Side cover plate with flow controls : N Inlet & exhaust isolator : N Inlet isolator : N Exhaust isolator : N SPP threads. High flow up to 0.18 C v, according to wattage and high flow Mod. ottom inlet : specify Mod DIMENSIONS PORTS CYLDER 1/8 NPTF CYLDER PORTS OPTIONL 1/8 NPTF OTTOM LET 10,0 20,5 Dimensions shown are metric (mm) 17,5 62,5 51,0 8,5 4,0 8,0 8,0 4,0 20,10 ±0,1 9,0 Ø 5,3 MTG. SLOT 33 OPTIONL ISOLTOR 2,5 1/4 NPTF LET & UST PORTS OTH ENDS 9,75 29,0 13,5 EX 5,2 18,9 71,1 13,7 17,3 19,0 74 Consult Precautions page 356 before use, installation or service of MC Valves.

Direct solenoid and solenoid pilot operated valves Function Flow (Max) Manifold mounting Series 4/2 # 10-32 - 1/8 0.11 C v sub-base with pressure regulators OPERTIONL ENEFITS 1.

11 Direct solenoid and solenoid pilot operated valves Function Flow (Max) Manifold mounting Series 4/2 # / C v sub-base with pressure regulators OPERTIONL ENEFITS 1. alanced poppet, immune to variations of pressure. 2. Short stroke with high flow. 3. The patented solenoid develops high shifting forces. 4. Powerful return spring. 5. Manual operator standard on all valves. 6. urn-out proof solenoid on C service HOW TO ORDER (Minimum DC wattage 5,4W) Valve less base 1/8 NPTF base 45-L00-DXXX-XXX 45-LJ-DXXX-XXX 45-N00-DXXX-XXX 45-NJ-DXXX-XXX 45 base 45-LJ-DXXX-XXX 45-NJ-DXXX-XXX SOLENOID OPERTOR D XX X- X XX * 700 XX Voltage X Wire length X Manual operator XX 120/60, 110/50 240/60, 220/50 C 24/60, 24/50 F 24 VDC (1.8 W) D 24 VDC (5.4 W) DF 24 VDC (12.7 W) * Other options available, see page 353. J 18 (Flying leads) Connector End plate kit required ( 1/4 NPTF) : M Options (with gauge port) : : replace L by M. : replace N by P. REGULTOR OPTIONS 45-XXJ-D XXX-XXX ( J is for dj. knob) Replace with E for slotted stem Replace with G for locking slotted stem 1 Non-locking 2 Locking K KD Electrical connection Square connector Square connector with light Flying leads ISO 1 ISO 2 ISO 3 MC 125 MC 250 MC Consult Precautions page 356 before use, installation or service of MC Valves.

12 100% 100% WRRNTY 18 O F P R O D U C T I O N T E S T E D 100% MONTHS TECHNICL DT Fluid : Pressure range : Lubrication : Filtration : Temperature range : Flow (at 6 bar, ΔP=1bar) : Leak rate : Coil : Voltage range : Protection : Power : Response times : Compressed air, vacuum, inert gases Vacuum to 120 PSI Not required, if used select a medium aniline point lubricant (between 180 F and 210 F) 40 µ 0 F to 120 F (-18 C to 50 C) 1.8 W : (0.09 C v ), 5.4 W : (0.11 C v ) 100 cm 3 /min General purpose class, continuous duty, encapsulated -15% to +10% of nominal voltage Consult factory Inrush : 10.9 V Holding : 7.7 V = 1.8 to 12.7 W 24 VDC (5.4 W) Energize : 6 ms De-energize : 2 ms 120/60 Energize : 3-8 ms De-energize : 2-7 ms Spare parts : Options : Solenoid operator (power 5.4 W) : DXXX-XXX, including mounting screws Seal (between solenoid and valve body) : Seal between base and valve : Seal between bases : Tie-rod (x2) : Pressure regulator : 45-00R (dj. Knob), 45-00L (Slotted Stem), 45-00M (Locking Slotted Stem). Inlet & exhaust isolator : N Inlet isolator : N Exhaust isolator : N SPP threads. High flow up to 0.18 C v, according to wattage and high flow mod. ottom inlet : specify Mod DIMENSIONS Dimensions shown are metric (mm) PORTS CYLDER 17,5 1/8 NPTF CYLDER PORTS OPTIONL 1/8 NPTF OTTOM 62,5 LET 10,0 20,5 51,0 8,5 4,0 8,0 8,0 4,0 20,10 ±0,1 9,0 ± 0,2 OPTIONL ISOLTOR Ø 5,3 MTG. SLOT 1/4 NPTF LET & UST PORTS OTH ENDS 33,0 2,5 9,75 29,0 13,5 EX Ø 15,5 13,5 5,2 18,9 71,1 OPTIONL GGE PORT 13,7 17,3 19,0 102,1 REGULTOR W/ SLOTTED STEM 14,0 13,4 LOCKG KNO 76 Consult Precautions page 356 before use, installation or service of MC Valves.

13 Direct solenoid and solenoid pilot operated valves Function Flow (Max) Manifold mounting Series 4/2 # / C v pressure regulators and sub-base with flow controls OPERTIONL ENEFITS 1. alanced poppet, immune to variations of pressure. 2. Short stroke with high flow. 3. The patented solenoid develops high shifting forces. 4. Powerful return spring. 5. Manual operator standard on all valves. 6. urn-out proof solenoid on C service. HOW TO ORDER (Minimum DC wattage 5,4W) Valve less base 1/8 NPTF base 45-L00-DXXX-XXX 45-LK-DXXX-XXX 45-N00-DXXX-XXX 45-NK-DXXX-XXX 45 base 45-LK-DXXX-XXX 45-NK-DXXX-XXX SOLENOID OPERTOR D XX X- X XX * 700 XX Voltage X Wire length X Manual operator XX 120/60, 110/50 240/60, 220/50 C 24/60, 24/50 F 24 VDC (1.8 W) D 24 VDC (5.4 W) DF 24 VDC (12.7 W) * Other options available, see page 353. J 18 (Flying leads) Connector End plate kit required ( 1/4 NPTF) : M Options (with gauge port) : : replace L by M : replace N by P. REGULTOR ND F.C. OPTIONS 45-XXK-D XXX-XXX ( K option is for dj. knob and F.C.) Replace with F for slotted stem and F.C. Replace with H for locking slotted stem and F.C. 1 Non-locking 2 Locking K KD Electrical connection Square connector Square connectorwith light Flying leads ISO 1 ISO 2 ISO 3 MC 125 MC 250 MC Consult Precautions page 356 before use, installation or service of MC Valves.

14 100% 100% WRRNTY 18 O F P R O D U C T I O N T E S T E D 100% MONTHS TECHNICL DT Fluid : Pressure range : Lubrication : Filtration : Temperature range : Flow (at 6 bar, ΔP=1bar) : Leak rate : Coil : Voltage range : Protection : Power : Response times : Compressed air, vacuum, inert gases Vacuum to 120 PSI Not required, if used select a medium aniline point lubricant (between 180 F and 210 F) 40 µ 0 F to 120 F (-18 C to 50 C) 1.8 W : (0.09 C v ), 5.4 W : (0.11 C v ) 100 cm 3 /min General purpose class, continuous duty, encapsulated -15% to +10% of nominal voltage Consult factory Inrush : 10.9 V Holding : 7.7 V = 1.8 to 12.7 W 24 VDC (5.4 W) Energize : 6 ms De-energize : 2 ms 120/60 Energize : 3-8 ms De-energize : 2-7 ms Spare parts : Options : Solenoid operator (power 5.4 W) : DXXX-XXX, including mounting screws Seal (between solenoid and valve body) : Seal between base and valve : Seal between bases : Tie-rod (x2) : Pressure regulator with flow controls : 45-00N (Slotted Stem), 45-00P (Locking Slotted Stem), 45-00S(dj. Knob). Inlet & exhaust isolator : N Inlet isolator : N Exhaust isolator : N SPP threads. High flow up to 0.18 C v, according to wattage and high flow Mod. ottom inlet : specify Mod DIMENSIONS CYLDER PORTS 1/8 NPTF CYLDER PORTS 10,0 20,5 Dimensions shown are metric (mm) 15,5 17,5 62,5 OPTIONL 1/8 NPTF OTTOM LET 51,0 DJ. LOCKG KNO 8,5 4,0 8,0 8,0 4,0 LOCK 20,10 ±0,1 33,0 OPTIONL ISOLTOR 9,0 ± 0,2 Ø 5,3 MTG. SLOT 1/4 NPTF LET & UST PORTS OTH ENDS 2,5 29,0 13,5 EX Ø 15,5 9,75 13,7 17,3 19,0 14,0 13,5 5,2 18,9 OPTIONL GGE PORT 71,1 102,1 REGULTOR W/SLOTTED STEM 6,0 LOCKG STEM 13,4 LOCKG KNO 78 Consult Precautions page 356 before use, installation or service of MC Valves.

15 I n t r i n s i c a l l y S a f e V a l v e s Series HOW TO ORDER ODY OPTIONS SOLENOID OPTIONS 35 - X X X - (DXXX - XXX) - FM ODY TYPE PORT SIZE VLVE FUNCTION/MNIFOLD TYPE Inline Individual Inline D Indiv. Inline w/2 Manifold Mount Ports Manifold E Manifold ody (N.C. Only) G Manifold ody w/gage Port (N.C. Only) O D Manifold ody Only #10-32 UNF (Inline Only) M5 (Inline Only) ODY OPTIONS O Manifold ody Only 3 way N.C. Only (Inline) Note : there is no manifold base for the 35 series. The manifold valve can only mount to a circuit bar, see note below SOLENOID OPTIONS 45 - X X X - (DXXX - XXX) - FM ODY TYPE PORT SIZE VLVE FUNCTION/MNIFOLD TYPE Inline 4 Port ody 5 Port ody D 4 Port ody O Ring Mount -ll ottom Ports E 5 Port ody O Ring Mount -3 ottom Ports Inlet and Cylinders F 4 Port ody O Ring Mount-ottom Cylinder Ports Only ase Mount O For ase Only - No Valve L ase Mount ody M ase Mount ody with Gage Port O C D F G H J K Manifold ody Only 1/8" NPT #10-32 UNF 1/8" SPPL M5 (Metric) #10-32 UNF ottom Ports M5 ottom Ports O Ring Mount Ports 1/8" NPT ottom Ports 1/8" SPPL ottom Ports Inline 1 No Flow Controls ases - Regulators O Valve Only - No ase Individual ase C Manifold ase E Manifold w/regulator w/slotted Stem G Manifold w/regulator w/locking Slotted Stem J Manifold w/regulator w/locking Knob MNIFOLD MOUNT CCESSORIES M End Plate Kit Pressure Seal etween Manifold Tie Rod N Isolator Kit - Inlet and Exhaust N Isolator Kit - Inlet only N Isolator Kit - Exhaust only N End Cover Plate - Plain N End Cover Plate w/flow Controls N Flow Control Needle ssembly SOLENOID OPTIONS D - X X X - X X X - FM VOLTGE FR 12VDC (0.6 W) FS 24VDC (0.6 W) LED LENGTH MNUL OPERTOR ELECTRICL CONNECTION 18" Leads 0 No operator Grommet 24" Leads 1 Non-locking Recessed C Conduit 1/2" NPS C 36" Leads 2 Locking Recessed CM Metal Conduit 1/2" NPS D 48" Leads 3 Non-locking Extended CN Metal Conduit w/grd. 1/2" NPS E 72" Leads 4 Locking Extended External Plug-in J* 6" Leads FM Plug-in (For ECD & ECE ar) J Rectangular Plug-in *Use J for external plug-in connectors JM Rectangular Male only K Mini Plug-in KJ Mini Plug-in Male only T Dual Tabs (.110) Plain TJ Dual Tabs (.110) Plain vailable on individual valves and circuit bars. 334 Consult Precautions page 356 before use, installation or service of MC Valves. NOTE : For valves mounted to a circuit bar reference MC circuit bar Catalog for ordering info. For the 35 series circuit bar, use MOD FM01 after circuit bar part number.

16 O p t i o n s OPTIONS Codification table for voltages / Wire length / Manual operators / Electrical connections VLVE CODE - D XX X - X XX OPTIONS VILLE FOR - Solenoid valves 35, 45 and 82 Series 353 Consult Precautions page 356 before use, installation or service of MC Valves.

17 OPTIONS 1. VOLTGE - D XX X - X XX VOLTGE 120/60, 110/50 240/60, 220/50 C 24/60, 24/50 D 24/60 E 200/60 F 240/50 G 100/50, 100/60, 110/60 D 24 VDC (5.4 W) D 12 VDC (5.4 W) DC 12 VDC (7.5 W) DD 24 VDC (7.3 W) DE 12 VDC (12.7 W) - CLSFonly DF 24 VDC (12.7 W) - CLSF only DK 110 VDC (4.7 W) DL 64 VDC (6 W) DM 36 VDC (5.3 W) DN 6 VDC (6 W) DP 48 VDC (5.8 W) DU 24 VDC (6 W) E 12 VDC (6 W) F 12 VDC (1.8 W) F 24 VDC (1.8 W) FE 12 VDC (2.4 W) FF 24 VDC (2.4 W) 2. WIRE LENGTH - D XX X - X XX WIRE LENGTH C 36 D 48 E 72 F 96 J For external plug-in connector ( J, K & T type electrical connection) P For plug-in valves (82 Series only) 354 Consult Precautions page 356 before use, installation or service of MC Valves.

18 O p t i o n s OPTIONS 3. MNUL OPERTOR - D XX X - X XX MNUL OPERTOR 0 No operator 1 Non-locking recessed 2 Locking recessed 3 Non-locking extended 4 Locking extended 4. ELECTRICL CONNECTION - D XX X - X XX ELECTRICL CONNECTION Flying leads K with protection diode L with protection varistor (M.O.V.) ** C 1/2" NPS conduit ** CM 1/2" NPS metal conduit ** CN 1/2" NPS metal conduit w/ground J Rectangular connector JD Rectangular connector with light JM Rectangular connector, male only K Square connector K Square connector with protection diode KC Square connector with protection varistor (M.O.V.) KD Square connector with light KE Square connector with light and protection diode KF Square connector with light and protection varistor (M.O.V.) KG Square connector with LED light & diode KJ Square connector (male only) KK Square connector with protection diode (male only) KL Square connector with protection varistor (male only) (M.O.V.) *** M Electrical common conduit T Dual tabs T T with protection diode TD T with light TE T with light and protection diode TJ Dual tabs (male only) TK TJ with protection diode TM TJ with light TN TJ with light and protection diode D* Plug-in connector DK* D with protection diode DL* D with protection varistor (M.O.V.) * To be used with 82 Series only ** Inline valves only for 35 & 45 series. No restrictions for 82 series. *** Stacking valves only for 35 & 45 series. Conduit end plate kit required, one per stack. 35 series : M series : M Consult Precautions page 356 before use, installation or service of MC Valves.

Direct solenoid and solenoid pilot operated valves

Direct solenoid and solenoid pilot operated valves Individual mounting Series Inline Sub-base non plug-in Sub-base plug-in Manifold mounting Sub-base non plug-in Sub-base plug-in 33 34 36 32 onded spool