CHECK VALVE - DIRECT OPERATED - Series VC4V SPECIFICATIONS PERFORMANCE CURVES VC4V03 VC4V10 VC4V06
|
|
- Laureen Howard
- 6 years ago
- Views:
Transcription
1 CHECK VLVE - DIRECT OPERTED - Series VV Veljan Direct operated Check Valve Series VV are poppet type and designed for a maximum pressure of 35 bar and a flow capacity rangg from 18 l/m for a 3/8 valve to 6 l/m for 1 1/2 valve. Mountg configuration of VV are accordance with International standards such as CETOP, ISO, DIN or NFP. Subplate mountg, L - body and T - body are standard. VV valves can be used as body type units or cartridges for manifold applications. zero-leak condition can be achieved for flow from port to port and free flow the opposite direction. Due to a precise ratio between the ma piston area and its mass, an exceptional fast response can be obtaed. Only a small openg stroke of the poppet causes free flow from port to port. SPECIFICTIONS General Type : Direct operated check valve Design : Poppet type Mountg : VV3 : Threaded body/ Subplate mountg/cartridge VV6 : Threaded body/ Subplate mountg/cartridge VV1 : Threaded body/ Subplate mountg Mountg position : Optional Port sizes (nomal) : 3/8, 3/4, 1 1/ 2 Type of port : Threads Direction of flow : o o o o mbient temperature : -2 C...+6 C (-4 F F) Special workg : Consult VELJN conditions PERFORMNCE CURVES Hydraulics Operatg Pressure range : - 5 psi ( - 35bar) Crackg pressure : See model code Flow gpm (lpm) : Maximum Nomal VV 3 ( 3/ 8 ) 48 (18) 4 (15) VV 6 ( 3/ 4 ) 95 (36) 72 (27) VV1 ( 1 1/ 2 ) 59 (6) 12 (45) Fluid : Meral oil as per DIN 51524/25 or other fluids on request Fluid temperature range : o o o o -18 C...+8 C ( F F) Viscosity recoended : 3 cst (18 SSU) Pressure drop p bar (psi) Pressure drop p bar (psi) (174) 12 (145) 1 (116) 8 (87) 6 (58) 4 (29) 2 (174) 12 (145) 1 (116) 8 (87) 6 (58) 4 (29) 2 VV3 5 (13.2) VV6 1 (26) 15 (4) Flow qv lpm (gpm) 1 2 (26.5) (56) Flow qv lpm (gpm) 2 (53) 3 4 (79.5) (16) Pressure drop p bar (psi) (174) 12 (145) 1 (116) 8 (87) 6 (58) 4 (29) 2 VV1 1 2 (26.5) (56) (79.5) (16) (132) Flow qv lpm (gpm) 6 (158)
2 CHECK VLVE - DIRECT OPERTED - Series VV ORDERING CODE VV *** Modification Series VV - Check valve (direct operated) Size 3-3/ 8 6-3/ / 2 Seal Class 1 - una N ( Standard) 5 - Viton Design letter Crackg pressure (pproximate ) Max Pressure 5 - for cartridges only - for body valves only ody Mountg Cartridge - Cartridge (VV3/VV6) Threaded body Threaded body - VV3 = / 2 NPTF ; VV6 = 1 NPTF (2-Ports,1-Port) - 3 Threaded body - VV6 = / 4 NPTF ; VV1 = 1 1/ 4 NPTF (1-Port,1-Port) Threaded body - V3 = / 2.S.P.P. ; VV6 = 1.S.P.P. (2-Ports,1-Port) D - 3 Threaded body - VV6 = / 4.S.P.P. ; VV1 = 11/ 4.S.P.P. (1-Port,1-Port) Subplate mountg 5 psi (35 bar) 3 - Subplate mountg VV3/6/1 Flange body 2 - Flange body - VV6 (2-Ports,1-Port) 1 = 2 = 3 = 4 = 5 = 6 = 7 = VV3 VV6/1 bar bar ody Head - Cap
3 CHECK VLVE - DIRECT OPERTED - Series VV VV3 (3/8 ) SUPLTE MOUNTING ( #3 ) Weight : 6.6 lbs (2.7 kg ) 1 Panel openg C5 r øc8 2 ø8 3 ø9 X 7 C6 r øc7 4 ø5 Mountg configuration D4 D2 D3 D1 3/8"-16 UNC x.63 dp. (M 1 x 16 dp.) D5 D9 D8 D6 6 1 lock mountg face Flatness.1 /1 length Surface fish Location hole ød ø ø.65 ø ø ø16.5 ø C5 C6 C7 C r.75 r ø3.7 ø r 19. r ø78. ø11. D1 D2 D3 D4 D5 D6 D7 D8 D ø.28 x ø7.1 x.433 dp. 11. dp ø.59 ø15. Ports Function Inlet Oulet Note : For details of Subplate & mtg. Screws please refer page 1
4 CHECK VLVE - DIRECT OPERTED - Series VV VV3 (3/8 ) SUPLTE Weight : 4.4 lbs ( 2. kg) Location hole C ø15 Y X ø Y X C6 C5 6 ø16 ø2 ø4 11 3/8-16 UNC x.63 dp (M1 x 16 dp) ø.59 ø.28 x.315 dp. ø ø15. ø7.1 x 8. dp. ø ø ø ø ø16.5 C5 C6 C **Note: Ports X and Y not required for direct operated check valve. Order No. VSS - P G 112 VSS G /2 NPTF 1/2.S.P.P Port sizes X+Y** 1/4 NPTF 1/4.S.P.P. Dimension 3/8-16UNC 1 1 / 4 lg. M1 x 35 DIN Mountg screws* Order No. m.tensile strength at p< 21 bar = 1 dan/ 2 V (Torque 68 Nm) at p>21 bar = 12 dan/ 2 V7-739 (Torque 82 Nm) * Mountg screws are cluded subplate order. For valves ordered without subplate, mountg screws must be ordered separately.
5 CHECK VLVE - DIRECT OPERTED - Series VV VV3 (3/8 ) - THREDED ODY ( #1 & #6 ) Weight : 6.3 lbs (2.8 kg) Ports (2x) Function Inlet Outlet Port sizes 1/2.S.P.P. or 1/2 NPTF
6 CHECK VLVE - DIRECT OPERTED - Series VV CRTRIDGE WITH CP VV3 ( # ) Weight : 2.24 lbs (1. kg) 2 1 ø r 16 r ø14 15 ø12 max 11 1 ø9 max 5 = 1.6 =.8 = µmra ø ø7 ø6 max 3/8-24 UNF-.78 dp (M1 x 2 dp) ø1.1 ø ø ø ø r ø28. ø ø14. ø r +.5 ø ± ± ø.7 ø ± ± ø17.8 ø r 1.5 r Ports Function Inlet Oulet 4 Mountg screws Order No. 3/8"- 24UNF x 1 3 /4 lg. V M1 x 45, DIN V ( Mountg screws must be ordered separately) Torque 68 Nm
PILOT OPERATED SEQUENCE VALVE - Series VR4S
PILOT OPERTED SEQUENCE VLVE - Series VRS Veljan Sequence Valve Series VRS are pilot operated controls and enable a hydraulic system to operate a sequence. Fluid is allowed to pass to a secondary system
More informationPILOT OPERATED PRESSURE RELIEF VALVE - Series VR4V
PILOT OPERTED PRESSURE RELIEF VLVE - Series VR4V The Veljan Pressure Relief Valve series VR4V are pilot operated and work Internal Dra on the prciple of hydraulic balancg. These valves are used to limit
More informationPILOT OPERATED PRESSURE RELIEF VALVE - Series VR4V
PILOT OPERTED PRESSURE RELIEF VLVE - Series VR4V The Veljan Pressure Relief Valve series VR4V are pilot operated and work Internal Dra on the prciple of hydraulic balancg. These valves are used to limit
More informationPILOT OPERATED UNLOADING VALVE - Series VR4U
PILOT OPERTED UNLODING VLVE - Series VR4U Veljan Unloadg Valves series VR4U are pilot operated controls and used to Internal Dra unload a circuit at low pressure when pilot pressure at pt is mataed higher
More informationPILOT OPERATED PRESSURE CONTROLS - FLANGED TYPE VR5 Series
PILOT OPERTED PRESSURE CONTROLS FLNGED TPE VR5 Series Veljan Flanged type, Valves Series VR5V ( Relief ), VR5U (Unloader) and VR5S (Sequence ) are pilot controls. These range of valves are suitable for
More information* Optional PRESSURE COMPENSATOR - FLANGED TYPE B A X 2.2. Typical application VR5P with flow control valve
* Veljan 3 ports pressure compensator Valve are designed for improved operation safety and reduced mountg cost. These valves are used to mata a constant pressure drop External PD, External PP Internal
More informationPILOT OPERATED PRESSURE CONTROLS - FLANGED TYPE VR5 Series
PILOT OPERTED PRESSURE CONTROLS FLNGED TPE VR5 Series Veljan Flanged type, Valves Series VR5V ( Relief ), (Unloader) and VR5S (Sequence ) are pilot controls. These range of valves are suitable for mountg
More informationPILOT OPERATED PRESSURE CONTROLS - FLANGED TYPE VR5 Series
PILOT OPERTED PRESSURE CONTROLS FLNGED TPE VR5 Series Veljan Flanged type, Valves Series VR5V ( Relief ), VR5U (Unloader) and VR5S (Sequence ) are pilot controls. These range of valves are suitable for
More informationDOUBLE, P.O. CHECK VALVES (PRE-ENGINEERED BLOCKS)
DOUBLE, P.O. CHECK VALVES (PRE-ENGINEERED BLOCKS) SERIES DOUBLE PILOT OPERATED CHECK VALVE... HS3 Page HD1 Page HD2 SERIES DOUBLE PILOT OPERATED CHECK VALVE GPM PSI LPM BAR CAVITY MODEL PAGE 5 3500 19
More informationVeljan Gear Pumps. 'B' Series Features:
'' Series Features: Self-priming pumps Heavy duty sleeve bushing design in a small frame size Displacements from 9.8cc/rev to 39.9cc/rev Working pressures up to bar Speeds up to rpm Flows up to 10.5gpm
More informationSEAT VALVES FEATURES. Cracking pressure depends on the area ratio of individual combination of spool and sleeve.
SET VLVES FETURES Veljan Seat Valves are bdy type munting series VD4S and cartridge units series VCR. The cmplete range f cartridges - bdy munted VD4S and manifld munted VCR are sized frm /8 t 1 1/2 permit
More informationBent Axis Piston Motor, Fixed, Bi-directional Series: MFBP...1
Features 40 bent axis piston motor for high power and small overall dimensions Bi-directional rotation Rotation speed up to 8800 rpm Torque up to 840 Nm ( 619 ft-lbs) Side or rear port locations available
More informationChapter 6: Check Valves
Contents Chapter : Check Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 0 10 1 25 32 Subplate Screw-in Slip-in Shuttle valves SSR -2 Check valves, direct operated
More informationFlow Control Valves. Overview. Accessories Catalog. Needle Valves. Flow Control Valves. Pressure Compensated Flow Control Valves.
Overview Needle Valves DV, DVE & DVP Series (see page ) Flow Control Valves DRV & DRVP Series (see page ) Pressure Compensated Flow Control Valves SRVR Series (see page ) Check Valves RV & RVP Series (see
More informationGear Housing Widths 1.00" 1.25" 1.50" 1.75" 2.00" 2.25" 2.50" Gear Housing Widths / Flow Rate [ VGP - D Series ]
'D' Series Features:- Heavy duty sleeve bushing design in a small frame size Displacements from 20.6cc/rev to 104.2cc/rev Working pressures up to 240bar Speeds up to 3500rpm Flows up to 27.5gpm High strength
More informationProportional Directional Control Cartridge Valves: PSV10-34 & PSV12-34
Control Cartridge Valves: PSV10-34 & PSV12-34 SCHEMATIC PRESSURE* FLOW CAVITY COIL Page 2 PSV10-34-02 250 BAR 3600 PSI 22 LPM 6 GPM SDC10-4 M16-26W R16-20W Page 4 PSV12-34-02 260 BAR 3770 PSI 50 LPM 13
More informationVeljan Gear Pumps. E' Series Features:-
E' Series Features:- Heavy duty sleeve bushing design in a small frame size Displacements from 43.5cc/rev to 146.5cc/rev Working pressures up to 240bar Speeds up to 3500rpm Flows up to 38.7gpm High strength
More informationDelta Power Company 4484 Boeing Drive - Rockford, IL 61109
4484 Boeing Drive - Rockford, IL 6119 SECTION/Description Pages Logic Elements 4 Page 43 Page 44 4484 Boeing Drive - Rockford, IL 6119 Logic Elements GPM PSI LPM BAR MODEL PAGE 4 3 14 241 SL-PLA 46 4 3
More informationHydraulic Screw-in Cartridge Valves (SiCV) Proportional valves Proportional solenoid valves for pressure and flow control
Hydraulic Screw-in Cartridge Valves (SiCV) Proportional valves Proportional solenoid valves for pressure and flow control Proportional valves PROPORTIONAL VALVES... - PFRH... -8 EPV...- EPV6...- EPV6A...-7
More informationVALVES POWER TRANSMISSION T E C H N I C A L C A T A L O G
VLVES POWER TRNSMISSION T E C H N I C L C T L O G Power transmission POCLIN HYDRULICS Methodology : This document is intended for manufacturers of machines that incorporate Poclain Hydraulics products.
More informationSeries PHP10 Variable Volume, Piston Pumps
Catalog HY13-1553-1/N,EU Series PHP1 Series PHP1 Variable Volume, Piston Pumps Bulletin 2-18/US 123 Catalog HY13-1553-1/N,EU Series PHP1 Performance Information Series PHP1 Pressure Compensated, Variable
More informationTable of contents. Valves 141. Check valves 142. with threaded connector 142. with ISO-flange connection (SAE) 144
Table of contents Valves 4 Check valves 4 with threaded connector 4 with ISO-flange connection (SAE) 44 for manifold mounting 48 Needle valves 5 with threaded connector 5 for manifold mounting 5 for manifold
More informationD05 Directional Control Valves
Engineering D05 Directional Control Valves WFDG4S*4-01, 60 Design Wet Armature Solenoid Operated Max Pressure up to 248 Bar (3600 psi) Same Day Shipments www.fluidynefp.com Table of Contents Basic Characteristicts...2
More informationPressure Control Valves. General Description. Specifications. Ordering Information
Catalog HY14-3000/US Technical Information Control Valves Series RCP General escription Series RCP in-line pressure control valves are chiefly used as remote control valves. They limit system pressure
More informationYMSY. Advanced design in disc distribution flow,which can automatically compensate in operating with high volume efficiency and long life.
The series motors adapts an advanced ROLLER gear set designed with disc distribution flow and high pressure. This motor series uses the ROTOR gear type manufactured with most advanced technology and quality
More information2-WAY FLOW CONTROL VALVE TYPE UDRD6
-WY FLOW CONTROL VLVE TYPE UDRD6 WK 0 00 NS6 up to 31,5 MPa up to 3 dm 3 /min WK 0 00 -way flow control valve type UDRD6 serves to control fluid flow rate independently of pressure and temperature in direction
More informationwhitedriveproducts SERIES Hydraulic Motor LIGHT DUTY
whitedriveproducts SERIES 275-276 - 277-278 - 280-281 - LIGHT DUTY Hydraulic Motor www.cenhyd.com 1(800)264-9571 WG WG (ll Series) For Light Duty pplications whitedriveproducts overview The White Drive
More informationPressure reducing valve, direct operated
Pressure reducing valve, direct operated RE 26564/5.11 Replaces: 2.3 1/8 Type DR 6 DP Size 6 Component series 5X Maximum operating pressure 315 bar [4568 psi] Maximum flow 6 l/min [15.9 US gpm] H7743 Table
More informationPILOT OPERATED PRESSURE RELIEF VALVE SERIES - IN-LINE MOUNTING
CONTINENTL HYDRULICS PR*W - PR*WU PILOT OPERTED PRESSURE RELIEF VLVE SERIES - IN-LINE MOUNTING 5505 WEST 123RD STREET SVGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTLHYDRULICS.COM PRECISE PR*W -
More informationRA / Pressure Reducing Valve, Pilot Operated Model DR (Series 5X) Ordering code 1/ PSI (350 bar) GPM (400 L/min)
R 26 892/06.98 Pressure Reducing Valve, Pilot Operated Model DR (Series 5) Size 10 to 0... 5000 PSI (50 bar)... 105 GPM (400 L/min) R 26 892/06.98 Replaces: 05.94 Pilot operated pressure reducing valve
More informationCVH103P. Check Valve Series CVH103P. Technical Information. General Description
Catalog HY-351/US Information Cartridge Style Valve. For additional information see Tips on pages 1-4. Valve Series H13P Spherical poppet for low leakage D -Ring eliminates back-up rings Dual sense paths
More informationHousings and Miscellaneous Parts
Housings and Miscellaneous Parts Standard and Special Valve Housings, Orifice Disks, Orifice Sizing harts, Pilot Pistons, dapters, djustment Kits and Seal Kits ETON Vickers Screw-in artridge Valves V-VLOV-M001-E1
More informationDENISON HYDRAULICS High Flow Seat Valve Cartridges CEHFE, C1C
DENISON HYDRAULICS High Flow Seat Valve Cartridges CEHFE, C1C 2/2-Way Function / Cavity conform to ISO 7368 (DIN 24342) Publ. 7 EN 5060 A FEATURES, DESCRIPTION FEATURES x High flow cartridges give highest
More informationProportional Valves. Proportional solenoid valves for pressure and flow control B-1.A. An Eaton Brand
Proportional Valves Proportional solenoid valves for pressure and flow control An Eaton rand -.A Proportional Valves Valve Locator/Section Contents Note: Proportional valve solenoid coils and electronic
More informationHydraulic Motor & Brake
SERIES 500-501 - 510-511 - 520-521 - 530-531 - 50-51 - MEDIUM DUTY Hydraulic Motor & rake RE RE (ll Series) For Medium Duty pplications Overview series descriptions RE Series motors offer the perfect compromise
More informationP.C. Priority Flow Control Valve Series J02D3. General Description
CV Catalog HY15-352/US General Description Needle Type, Compensated Regulator Valve. For additional information see Tips on pages 1-4. P.C. Priority Control Valve Series J2D3 Features Good adjustment from
More informationHYDRAULIC MOTORS MLHH
HYDRAULIC APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Mining machinery etc. CONTENTS Specification
More informationPROPORTIONAL DIRECTIONAL CONTROL VALVES PILOT OPERATED WITHOUT LVDT TYPICAL PERFORMANCE SPECIFICATIONS W/O LVDT, OPEN INNER LOOP MOUNTING SURFACE
ED8M PILOT OPERTED WITHOUT TYPICL PERFORMNCE SPECIFICTIONS W/O, OPEN INNER LOOP MOUNTING SURFCE NFP/T3.5.1M R1-1984 D8 (Formely D6) NSI/B93.7M-1986 ISO SIZE 8 These proportional directional control valves
More informationFLOW CONTROL VALVES A5-1 PN# / / ACC
FLOW CONTROL VLVES Flow Control Valves The HYDC family of flow control valves permit safe, simple and repeatable control of hydraulic fluids at operating pressures to psi. The standard slotted control
More informationHigh Flow Cartridge Valves 2/2 Way Series NG16 NG100
High Flow Cartridge Valves 2/2 Way Series NG16 NG100 Table of Contents Designation Symbol Page General Description and Operating Principle 3 Sectional View and Types of Cones and Sleeves 4 Specifications
More informationCheck valve, pilot operated
Courtesy of CM/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) 46-5480 www.cmafh.com Check valve, pilot operated Type ZS Size 6 Component series 6X Maximum operating pressure
More informationDirectional Control Valves Series D111VW. General Description. Features. Performance Curves
Technical Information General valves are piloted by a D1VW valve. The valves can be ordered with position control. The minimum pilot pressure must be ensured for all operating conditions of the directional
More informationVISCOSITY RANGE GPM m 3 h PSI Bar F C SSU cst
SERIES 493, 493 Section 34 Page 34. TBLE OF CONTENTS Features & Benefits...2 Specifications...2 Standard Materials of Construction...2 Key...3 Cutaway View & Pump Features...3 Mountg Options...4 Dimensions
More informationSINGLE VANE PUMPS. BH*, V* and DT6/7 single vane pumps DATA SHEET
SINGLE VANE PUMPS BH*, V* and DT/7 single vane pumps BH* SINGLE VANE PUMPS BH*SINGLE VANE PUMP ORDERING CODE F BHQ 7 D 1 A 1 7 1- F means special seals for fire-resistant fluids. Omit if not required.
More informationPilot Operated Pressure Relief Valve Series R5V (Denison)
Characteristics Pilot operated pressure relief valves series R5V have a similar design to the subplate mounted R4V series. The SAE flanges allow to mount the valves directly on the outlet flanges of pumps
More informationFEATURES SPECIFICATIONS
FETURES 1 Heavy-Duty Drive Link is up to 30% stronger than competitive designs for longer life. 1 2 3 H 2 Three-Zone Orbiting Valve precisely meters oil to produce exceptional volumetric efficiency. 3
More informationProportional Valves. Proportional solenoid valves for pressure and flow control
Proportional Valves Proportional solenoid valves for pressure and flow control EATON Vickers Screw-In Cartridge Valves V-VLOV-MC-E4 September, 7 - Electro- Proportional Valves Section Contents Typical
More informationCONTINENTAL HYDRAULICS VAD05M-VMD05M - AIR & LEVER OPERATED DIRECTIONAL VALVES
CONTINENTAL HYDRAULICS VAD05M-VMD05M AIR & LEVER OPERTAED DIRECTIONAL VALVES 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM VAD05M-VMD05M AIR & LEVER OPERATED
More informationDirectional Control Valves
Overview HYDAC offers several functions of the Directional Control Cartridges. HYDAC Manually operated position, - way normally closed, spring return, directional valve features poppet design. It offers
More informationHIGH PRESSURE FILTERS HF4P Series Inline Filters 5000 psi up to 120 gpm
HIGH PRESSURE FILTERS HF4P Series Inline Filters 5000 psi up to 120 gpm Hydraulic Symbol A B Features Meets HF4 automotive standard Non-welded housing design reduces stress concentrations and prevents
More informationChapter 6: Check Valves
Contents Chapter : Check Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 0 10 1 25 32 Subplate Screw-in Slip-in SSR RK / RB CS SPZBE SPV / SPZ C4V CPS C4V D4S
More informationDT (700 Series) Hydraulic Motor
DT (700 Series) Hydraulic Motor shafts 45 60mm Tapered 47 2-1/4 Straight 16.0 [.631] 15.9 [.629] 10.0 [.395] 9.9 [.391] 35 [1.37] 7 [.29] *120 [4.73] 70 [2.75] 38.9 [1.530] 37.6 [1.480] 12.7 [.501] 12.7
More informationProportional Directional Control Valves Series D*1FE. General Description. Features. D41FE Standard
Technical Information General Description pilot operated proportional valves are designed for high precision applications that require a safe middle position of the main spool at power down. The pilot
More informationVickers Pressure Relief Solenoid Operated, Two-Stage Directional Control Valve DG5S4-02 Flows to 115 l/min (30 USgpm) Pressure to 210 bar (3000 psi)
Vickers Pressure Relief Solenoid Operated, Two-Stage Directional Control Valve DG5S4-02 Flows to 115 l/min (30 USgpm) Pressure to 210 bar (3000 psi) Revised 2/93 GB C 2037 Table of Contents Model Code...................................................................................................
More informationCourtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)
Features MF Filters are manufactured with an aluminum head. MF, MFD, MFDS Series Spin-On Filters Choice of NPT, SAE straight thread O-ring boss, BSPP, and SAE 4-bolt flange porting to allow easy installation
More informationPilot Operated Directional Control Valves Series D1VP, D3DP, D4P, D9P, D11P
Characteristics Series D1VP, D3DP, D4P, D9P, D11P The D1VP is a hydraulically controlled 4/3 or 4/ way directional control valve. The valve can be operated either by the pilot ports X and Y via the subplate
More informationCheck Valves, Size Spherical Poppet-type, Screw-in Design Series RKVE l/min, 350 bar (500 bar)
Check Valves, Size 04... 40 Spherical Poppet-type, Screw-in Design Series RKVE... 360 l/min, 350 bar (500 bar) 1 General 1.1 Product description Series RKVE units are screw-in check valves with mounting
More informationMOVICONTROL. Single and Double Fixed Vane Pumps SERIES V10, V20, 25V/VQ, 35V/VQ, 45V/VQ.
Single and Double Fixed Vane Pumps SERIES V10, V20, 25V/VQ, 35V/VQ, 45V/VQ www.movicontrol.com.br V10/V20 Series Features Balanced vane type pumps are excellent for medium- to low-pressure mobile and industrial
More informationDMH085** Series will be available January 1, Catalog HY /US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO.
Catalog HY-/US Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. /GPM BAR/PSI DL8... C8-... Position, Way, N.C. Poppet,... Pull to Open.../8... /... DL... C-... Position, Way, N.C. Poppet,... Pull
More informationNG6. Proportional adjustment. Manifold mounting acc. to ISO External drain. Main stage spool type valve. Pilot stage seated type valve.
Catalog HY14-255/US Technical Information Series VY*K General Description Series VY*K pilot operated sequence valves feature proportional adjustment and an external drain. The external drain allows application
More informationPressure Compensator Valves Series R5P (SAE Flange Mounted) General Description. Features
Technical Information General Description Series R5P direct operated, 3-way pressure compensators can be combined with any type of fixed or adjustable flow resistor (throttle) to provide a load compensated
More informationSV9A-10-E - Solenoid Valve 4-way, 3-position spool type solenoid valve Up to 36 L/min (9.5 USgpm) 210 bar (3000 psi)
SV9--E - Solenoid Valve -way, -position spool type solenoid valve Up to 6 L/min (9.5 USgpm) bar ( psi) () () (P) (T) In the de-energized position all ports are closed. When solenoid '' is energized flow
More informationVariable displacement axial piston pumps,
ariable displacement axial piston pumps, for open circuit DISPLACEMENTS From To 2.75 in 3 /rev (45 cm 3 /rev) 5.12 in 3 /rev (84 cm 3 /rev) MAX SPEED 3000 min -1 PRESSURE Max. continuous Max. intermittent
More informationDirectional Seat Valve Series D4S (Denison)
Characteristics Seat valves series D4S are designed for directional control functions. A large variety of poppets, springs and covers - including shuttle valves, stroke limiters, solenoid valves (VV01)
More informationPressure Control Valves Series R. General Description. Specifications. Flow Data
Catalog Y14-2502/US Technical Information Series R General Description Series R direct relief valves limit system pressure by opening to tank when system pressure reaches the valve setting. Specifications
More informationPRPM2-A. = 5.5 Nm (4.1 lb.-ft.) (qual. 8.8 Nm (6.5 lb.-ft.) for socket cap screws. = 50 Nm (36.9 lb.-ft.) for cartridges
Technical Information General Description proportional pressure reducing valves keep a constant pressure p red on the secondary, or regulated, side, independent of pressure fluctuations on the primary
More informationUSA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:
SPECIFICTIONS D08H Pattern Directional Control Valves lso refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONTCT INFORMTION US Headquarters 770 Capitol
More informationCheck Valves. VC Series - Cartridge Mounting 500 Bar. Innovative Fluid Power. Bulletin 86624
VC Series - Cartridge Mounting 500 ar Innovative Fluid Power ulletin 86624 Issue 1.0 02.2010 VCC 500 ar General Information Check Valve with Standard Top Cap Section View with Standard Poppet Maximum Working
More informationPressure Control Valves
Control Valves DR8- Reducing/Relieving, Direct Acting, Spool Type 4 gpm (5 l/min) 6 psi (4 bar) Description A screw-in cartridge, direct acting, spool type, pressure reducing/relieving valve with internal
More informationTorque. Motor model R
MA series motors CHARACTERISTICS OF THE MA SERIES MOTORS (SAE Motor model Displacement Continuous max. speed (1 Intermittent max. speed (1 Max. flow absorbed Torque Torque at 350 bar (5100 psi Theoretical
More informationZRV. Direct Operated Check Valve Series ZRV (Denison)
Characteristics / Ordering Code Direct Operated Check Valve Series ZRV (Denison) Direct operated check valves series ZRV have a cartridge type insert to provide zero leakage and high life time. he check
More informationLow Pressure Filters
MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM Hydraulic Symbol /80/85/160/180 MF 90/95/190/195 A A B B Features MF Filters are manufactured with an aluminum head. Choice of NPT, SAE straight
More informationV 20 F - 1 P 13 S - 1 A 8H 22 L. Std. cover. 1/2 NPT thd. (V10 only) 3/4 NPT thd. (V20 only) 3/4-16 St. thd. (V10F & V20F) 3/4 16. St. thd.
Model Codes V 2 F - 1 P 13 S - 1 8H 22 L 1 2 3 4 5 6 7 8 9 1 11 12 1 Vane pump 2 Series 1 or 2 3 Integral valve options (Omit if not required) F Flow control & relief P Priority valve & relief 4 Mounting
More informationAXIAL PISTON PUMP - J9V
AXIAL PISTON PUMP - J9V SALIENT DESIGN & CONSTRUCTION FEATURES DESCRIPTION : Variable volume, swash plate design axial piston pump for open loop circuits 28 bar continuous operating pressure Efficient
More informationDXPE*J /117 ED. DIRECtIONAL CONtROL VALVE PILOt OPERAtED, WItH OBE AND FEEDBACK. Q max (see performance table) SERIES 31
85 320/117 ED DXPE*J DIRECtIONL CONtROL VLVE PILOt OPERtED, WItH OE ND FEEDCK SUPLtE MOUNtINg DXPE5J CEtOP P05 DXPE5RJ ISO 4401-05 DXPE7J ISO 4401-07 DXPE8J ISO 4401-08 p max (see performance table) Q
More informationOMP Hydraulic Motor Versions
Versions VERSIONS Mounting flange Shaft Port size European version US version Side port version End port version Flange port version G 1 /2 X X X No No OMP Cyl. 25 mm G 1 /2 X X X Yes No OMP G 1 /2 X X
More informationProportional Directional Control Valves Series D*1FB. General Description. Features D91FB OBE
Technical Information Series D*1FB General Description Series D*1FB pilot operated proportional directional valves come in 4 sizes: D31FB NG10 (CETOP 5) D41FB NG16 (CETOP 7) D91FB NG25 (CETOP 8) D111FB
More informationVED*MJ - PILOTED PROPORTIONAL DIRECTION CONTROL VALVES WITH OBE & FEEDBACK
CONTINENTAL HYDRAULICS VED*MJ PILOTED PROPORTIONAL DIRECTION CONTROL VALVES WITH OBE & FEEDBACK 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM VED*MJ PILOTED
More informationChapter 10: Valves for Pipe Mounting
Contents Chapter : Valves for Pipe Mounting Series Description Size Body Page DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 1¼ 1½ 2 L-port T-port Pressure valves, manual operation R4V R4R Pressure relief function Pressure
More informationBW0511FP. ByWire Elements BW0511FP Flow Sharing Element Interface IBW0511
ywire Elements Flow Sharing Element Interface IW05 efore use, carefully read the GENERL INSTRUCTIONS FOR USE OF DIRECTIONL CONTROL VLVES Technical data Nominal flow Nominal pressure 35 l/min - P=8 bar
More informationManapak Sandwich Valves. General Description
echnical Information Series RM General Description RM Series relief valves limit system pressure by opening to tank when system pressure reaches the valve setting. With D3 size, they can also be configured
More informationISO cartridge valves type LIDD and LIQV Flow control, ISO 7368 sizes 16 63
Table H004/E ISO cartridge valves type LIDD and LIQV Flow control, ISO 78 sizes LIDD LIQV/K LIDD and LIQV are flow control valves not compensated, in ISO cartridge design, made by a functional cover and
More informationVJL Functional Description. Ordering Code VJL Spare Parts HA /2002. Logical 3-way check valves. Replaces HA /2001
Logical 3-way check valves VJL2-304 HA 5007 3/2002 Size 04 p max up to 210 bar Q max up to 15 L/min Replaces HA 5007 6/2001 Screw-in cartridge valve For leak-free applications Simple design High reliability
More informationChapter 5: Flow Valves
Catalogue HY11-300/UK Contents Chapter : Flow Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/4 3/8 1/2 3/4 1 06 10 16 Throttle valves, manual adjustment MVI -2 NS -4 FS With free
More informationCROSS HYDRAULICS PTY LTD SECTION
OVERVIEW The motor series is an economical alternative to more complex geroler designs that still provides high efficiency across a wide performance range. These motors are intended for medium-duty applications
More informationGM25 Motor Dimensional Information
GM25 Series Birotational Hydraulic Motors GM25 Series hydraulic motors are designed for low noise, high efficiency birotational operation. Cast iron construction insures reliability and strength. A number
More informationCheck valve, pilot operated
Check valve, pilot operated RE 564/07.0 Replaces: 08.05 /8 Type ZS Size 5 Component series 5X Maximum operating pressure 35 bar [4568 psi] Maximum flow 450 l/min [8.9 US gpm] H7685 Table of contents Contents
More informationCheck valve, pilot operated
Check valve, pilot operated RE 548/07.0 Replaces: 0.09 /8 Type ZS Size 6 Component series 6X Maximum operating pressure 35 bar [4568 psi] Maximum flow 60 l/min [5.8 US gpm] tb056 Table of contents Contents
More informationCheck valve, pilot operated
RIES TECHNOLOGY s.r.l. Check valve, pilot operated RE 558/07.0 Replaces: 08.05 /8 Type ZS Size 6 Component series 5X Maximum operating pressure 35 bar [568 psi] Maximum flow 300 l/min [79. US gpm] K30/
More informationIFP MPC(D)03 PILOT CHECK VALVE MODULE
IFP MPC(D)03 PILOT CHECK MODULE ISO4401-03 SIZE/NFPA D03 STEEL SEAT FOR LONG WEAR ZERO LEAKAGE DECOMPRESSION FEATURE C:\wliu\MPC.bmp MPC-03-W MPC-03-A MPC-03-B MPC (D) - 03 - W - 1 MODULAR CHECK DECOMPRESSION
More informationPRESSURE CONTROLS TECNORD
Pressure Reducing / Relieving Valves GPM PSI LPM BAR MODEL PAGE 1 4 38 276 DF-PRP 174 2 3 76 27 SK-PRP 176 1 4 38 276 DF-PWP 178 Typical Schematic Typical application for the PRP and PWP is multi-system
More informationUSA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:
SPECIFICTIONS D08 Pattern Directional Control Valves lso refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONTCT INFORMTION US Headquarters Dynex/Rivett
More informationCheck-Q-meter type FD
BEIJING HUADE HYDRAULIC INDUSTRIAL GROUP CO.,LTD. Check-Q-meter type FD Size 12,16,25,32 up to 31.5MPa up to 560 L/min RE27551/12.2004 Replaces RE27551/05.2001 Features: - Porting pattern to DIN 24 340,
More informationSLIP-IN CARTRIDGE INSERT VALVES & OPERATORS
SLIP-IN CRTRIDGE INSERT VLVES & OPERTORS OILGER TOWLER, S.. Entidad Zikuñaga, 6 0.10 HERNNI (Gipuzkoa) phone: (+34) 943 55 700 E-mail: oilgear@oilgeartowler.es INTRODUCTION & FETURES IN RIEF OPERTOR HED
More informationLOW PRESSURE FILTERS MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM
MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM Hydraulic Symbol MF 80/85/160/180 MF 90/95/190/195 A A (Standard) (Suction) B B Features MF Filters are manufactured with an aluminum head. Choice
More informationwhitedriveproducts SERIES Hydraulic Motor LIGHT DUTY
whitedriveproducts SERIES 145-146 - LIGHT DUTY Hydraulic Motor www.cenhyd.com 1(800)264-9571 WD WD (All Series) whitedriveproducts overview The WD motor series is an economical solution for light duty
More informationLOW PRESSURE FILTERS MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM
LOW PRESSURE FILTERS MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM Hydraulic Symbol MF 80/85/160/180 MF 90/95/190/195 A A (Standard) (Suction) B B Features MF Filters are manufactured with
More informationVALVES RANGE FOR OPEN LOOPS T E C H N I C A L C A T A L O G
VALVES RANGE FOR OPEN LOOPS T E C H N I C A L C A T A L O G Valves range for open loop 2 18/07/2017 Valves range for open loop CONTENT CHECK VALVES 5 Direct operated valves 7 Pilot operated valves 11 Counterbalance
More informationBML S K IFP BML HIGH TORQUE LOW SPEED MOTORS. Model code. Model. High Performance in an economical package
IFP HIGH TORQUE LOW SPEED MOTORS High Performance in an economical package International motors provide high output torque from an efficient compact design. Motors are available with displacements from
More informationStandard Cartridge Valves 2/2 Way Series NG16 NG100
Standard Cartridge Valves / Way Series NG NG Table of Contents Designation Symbol Page General Description and Operating Principle Specifications and Characteristic Parameters Typical Characteristic Curves
More information