V 20 F - 1 P 13 S - 1 A 8H 22 L. Std. cover. 1/2 NPT thd. (V10 only) 3/4 NPT thd. (V20 only) 3/4-16 St. thd. (V10F & V20F) 3/4 16. St. thd.
|
|
- Spencer Grant
- 5 years ago
- Views:
Transcription
1 Model Codes V 2 F - 1 P 13 S - 1 8H 22 L Vane pump 2 Series 1 or 2 3 Integral valve options (Omit if not required) F Flow control & relief P Priority valve & relief 4 Mounting 1 2-bolt flange 6 2 bolt flange (SE size) 5 Inlet port connections D / str. thd. (V2 only) P - 1 NPT thread (V1 only) 1 1 / 4 NPT thread (V2 only) S / str. thd. (V1 only) 1 5 / 8-12 str. thd. (V2 only) T / str. thd. (V1 only) 7 Outlet port connections Code Std. cover Flow control cover Pressure Tank K P S T 1/2 NPT thd. (V1 only) 3/4 NPT thd. (V2 only) 3/4 16 (V1 only) 1-1/16 12 (V2 only) (V1F & V2F) (V2F) (V1F) 1/2 NPT thd. (V1F & V2F) 1-1/16 12 (V2F) (V1F) Priority valve cover Primary Secondary Tank outlet outlet 9/16-18 (V1P) (V2P) (V1P) 7/8-14 (V2P) 9/16-18 (V1P) (V2P) 6 SE rated capacity USgpm (12 r/min & 1 psi) 1 4 L/min (1 USgpm) 2 8 L/min (2 USgpm) 3 11 L/min (3 USgpm) 4 15 L/min (4 USgpm) 6 23 L/min (6 USgpm) 7 27 L/min (7 USgpm) 6 23 L/min (6 USgpm) 7 27 L/min (7 USgpm) 8 3 L/min (8 USgpm) 9 34 L/min (9 USgpm) L/min (11 USgpm) L/min (12 USgpm) L/min (13 USgpm) V1 series V2 series 8 Shafts 1 Straight keyed 3 Threaded with woodruff key 11 Splined 12 Splined (V1 only) 38 Splined 62 SE Spline (V2 only) 9 Position of outlet or primary outlet port (Viewed from cover end of pump) Opposite inlet port 9 CCW from inlet C In line with inlet D 9 CW from inlet 11 Design Subject to change. Installation dimensions remain the same for designs 2 through Shaft rotation (Viewed from shaft end of pump) L Left hand for counterclockwise. Omit for right hand. 1 Integral valves Orifice No. Flow rate 2 8 L/min (2 USgpm) 3 11 L/min (3 USgpm) 4 15 L/min (4 USgpm) 5 19 L/min (5 USgpm) 6 23 L/min (6 USgpm) 7 27 L/min (7 USgpm) 8 3 L/min (8 USgpm) Relief valve setting 17 bar (25 psi) 35 bar (5 psi) C 52 bar (75 psi) D 7 bar (1 psi) E 86 bar (125 psi) F 1 bar (15 psi) G 121 bar (175 psi) H 14 bar (2 psi) J 155 bar (225 psi) K 175 bar (25 psi) 68
2 Installation Dimensions V1 Series Dimensions in millimeters (inches). Shaft options shown on page rpm Dimensions & 1 psi 12,7 (.5) 1 USgpm 115,6 (4.55) 91,9 (3.62) 2 USgpm 115,6 (4.55) 91,9 (3.62) 3 USgpm 115,6 (4.55) 91,9 (3.62) 4 USgpm 121,9 (4.8) 98,3 (3.87) 82,55/82,5 5 USgpm 121,9 (4.8) 98,3 (3.87) 21,4 (3.25/3.248) (.843) 6 USgpm 127, (5.) 13,4 (4.7) 7 USgpm 127, (5.) 13,4 (4.7) UNF-2 THD UNF-2 THD. (SHOWN) (SHOWN) OR OR 1. NPT THD. OUTLET PORT.5 NPT THD. OUTLET PORT 38,1 (1.5) 76,2 (3.) C 62,7 (2.47) 46 (1.81) 19,5/19,2 (.75/.749) 7,9 (.31) 24,6 (.97) 6,35/6,1 (.25/.24) 44,4 (1.75) 4,75 (.187) SQ. KEY 25,4 (1.) LONG CLOCKWISE ROTTION SE FLNGE (REF.) 11,9 (.47) R. D 21,13/21, (.832/.827) 1 1 V1F Series Dimensions in millimeters (inches). Shaft options shown on page rpm Dimensions & 1 psi 1 USgpm 128,8 (5.7) 19,5 (4.31) 2 USgpm 128,8 (5.7) 19,5 (4.31) 3 USgpm 128,8 (5.7) 19,5 (4.31) 4 USgpm 135,1 (5.32) 115,8 (4.56) 5 USgpm 135,1 (5.32) 115,8 (4.56) 6 USgpm 14,2 (5.52) 12,9 (4.76) 7 USgpm 14,2 (5.52) 12,9 (4.76) 16,9 (4.21) 6,7 C (2.39) 38,1 (1.5) TNK PORT UN 2 THD. OR.5 NPT THRED D 97,5 (3.84) 46, (1.81) INLET PORT 1. NPT THD. OR UN 2 THD. OR UN 2 THD. 24,6 (.97) 6,5 (2.38) 15,2 (.6) 12,7 (.5) 31,8 (1.25) NO. 1 SHFT MJOR DI. 18,62/18,47 (.733/.727) 6,35/6,1 (.25/.24) 2,6 (.81) 16,4 (4.19) 82,55/82,5 (3.25/3.248) 21,3 (.84) 53,2 (2.9) 16,3 (4.19) 95,2 (3.75) NO. 38 SPLINED SHFT INVOLUTE SPLINE FLT ROOT 16/32 DIMETRL PITCH 11 TEETH 3 PRESS. NGLE.59 MINOR DIMETER 95,3 (3.75) 11,1 (.44) 2 HOLES 11,9 (.47) R. 1 1 OUTLET PORT UN-2 THD. SE FLNGE (REF.) 11,2 (.44) 2 HOLES 69
3 V1P Series Dimensions in millimeters (inches). Shaft options shown on page rpm Dimensions & 1 psi SECONDRY OUTLET PORT UNF-2 THD. SE O-RING OSS CONNECTION MJOR DI. 1 USgpm 13, (5.12) 19,5 (4.31) 2 USgpm 13, (5.12) 19,5 (4.31) 3 USgpm 13, (5.12) 19,5 (4.31) 4 USgpm 136,4 (5.37) 115,8 (4.56) 5 USgpm 136,4 (5.37) 115,8 (4.56) 6 USgpm 141,5 (5.57) 12,9 (4.76) 7 USgpm 141,5 (5.57) 12,9 (4.76) 12,7 (.5) 16, (.63) 5,3 (1.98) 12,9 (4.5) C 3,2 (1.19) COVER POSITION C D 18, (4.25) TNK PORT FOR PRESSURE RELIEF OF PRIMRY OUTLET PORT UNF-2 THD. SE O-RING OSS CONNECTION 6,5 (2.38) 24,6 (.97) 15,2 (.6) 25,4 (1.) NPT INLET PORT 31,8 (1.25) 6,35/6,1 (.25/.24) 18,62/18,47 (.733/.727) 2,6 (.81) 82,55/82,5 (3.25/3.248) 21,3 (.84) 16,4 (4.19) ,9 (.47) R. NO. 38 SPLINED SHFT INVOLUTE SPLINE FLT ROOT 16/32 DIMETRL PITCH 11 TEETH 3 PRESS. NGLE.59 MINOR DIMETER CLOCKWISE ROTTION.437 D. THRU 2 HOLES 13, (5.12) REF. 95,3 (3.75) PRIMRY OUTLET PORT UNF-2 THD. SE O-RING CONNECTION V2 Series Dimensions in millimeters (inches). Shaft options shown on page rpm Dimensions & 1 psi OUTLET PORT UN-2 STR. THD. SE O-RING OSS CONNECTION NO. 1 SHFT 6 USgpm 125,2 (4.93) 12,1 (4.2) 7 USgpm 131,6 (5.18) 18,4 (4.27) 8 USgpm 131,6 (5.18) 18,4 (4.27) 9 USgpm 131,6 (5.18) 18,4 (4.27) 11 USgpm 136,6 (5.38) 113,5 (4.47) 12 USgpm 14,2 (5.52) 117,1 (4.61) 13 USgpm 14,2 (5.52) 117,1 (4.61) C D 66, (2.6) 62, (2.44) 12,7 (.5) 31 (1.22) 67,6 (2.66) 31,8 (1.25) NPT INLET PORT 4,1 (.16) 19,5/19,2 (.75/.749).4,76 (1875) X 41,1 (1.62) LONG KEY 82,55/82,5 (3.25/3.248) 21,13/21, (.832/.827) 11,1 (.437) 2 HOLES 47,8 (1.88) R. CLOCKWISE ROTTION 16.4 (4.19) ±.4 53,1 (2.9) ,9 (.47) R. 7
4 Installation Dimensions V2F & V2P Series Dimensions in millimeters (inches). Shaft options shown on page 72. Dimensions 12 rpm & 1 psi 6 USgpm 149,6 (5.89) 125,7 (4.95) 7 USgpm 156, (6.14) 132,1 (5.2) 8 USgpm 156, (6.14) 132,1 (5.2) 9 USgpm 156, (6.14) 132,1 (5.2) 11 USgpm 161, (6.34) 136,9 (5.39) 12 USgpm 164,3 (6.47) 14,5 (5.53) 13 USgpm 164,3 (6.47) 14,5 (5.53). 31,8 (1.25) NPT INLET PORT 18,62/18,47 (.733/.727) V2P SECONDRY OUTLET PORT UNF 2 STR THD SE O-RING OSS CONNECTION V2F TNK PORT 12,7 (.5) NPT 12,7 (.5) 19,1 (.75) 15,7 (.62) C 15,7 (.62) D 124, (4.88) 62, (2.44) V2P TNK PORT UNF 2 STR THD SE O-RING OSS CONNECTION 31,8 (1.25) 31, (1.22) 4,1 (.16) 62, (2.44) 82,55/82,5 (3.25/3.248) 23,9 (.94) NO. 38 SPLINED SHFT INVOLUTE SPLINE 16/32 DIMETRL PITCH FLT ROOT 11 TEETH 3 PRESS. NGLE.59 MINOR DIMETER 16,48/16,27 (4.192/4.184) 53,1 (2.9) 47,8 (1.88) 11,2 (.44) 2 HOLES ,9 (.47) R. V2P PRIMRY OUTLET PORT UNF 2 STR THD SE O-RING OSS CONNECTION V2F OUTLET PORT UNF 2 STR THD SE O-RING OSS CONNECTION 71
5 Optional Shafts V1 Series Dimensions in millimeters (inches) Note: No. 1 keyed shaft and No. 38 splined shaft shown on pages 69 and 7 respectively. 5, (1.97) 41,9 (1.65) 31,8 (1.25) 14,7 (.58) 31,8 (1.25) (#11 SHFT) 41,4 (1.63) (#12 SHFT) 3,3 (.13) 3,2 (1.19) 15,88/15,85 (.625/.624) 17,73/17,48 (.698/.688) #11 SHFT EXTENSION (SHOWN) INVOLUTE SPLINE FLT ROOT - MJOR DI. FIT 16/32 DIMETRL PITCH 9 TEETH P.D. 3 PRESSURE NGLE MJOR DI /.622 MINOR DI MIN. 3,2 (.125) D.-THRU #6 WOODRUFF KEY.5-2 UNF- 2 THD. #12 SHFT EXTENSION INVOLUTE SPLINE FLT ROOT - MJOR DI. FIT 16/32 DIMETRL PITCH 13 TEETH P.D. 3 PRESSURE NGLE MJOR DI /.872 MINOR DI MIN No. 3 shaft extension No. 11 & 12 shaft extension V2 Series Dimensions in millimeters (inches) Note: No. 1 keyed shaft and No. 38 splined shaft shown on pages 7 and 71 respectively. No. 62 splined shaft same as V1 #11 shaft shown above. 26,9 (1.6) 7,6 (2.78) 26,9 (1.6) 31,8 (1.25) 16,8 (.66) #13 WOODRUFF KEY 74,7 (2.94) 5,8 (2.) 37,3 (1.47) FULL DEPTH OF SPLINE 31,8 (1.25) HEX 23,83/23,81 (.938/.9375) 26,8/25,82 (1.267/1.167) #2 THD. 19,7/19,2 (.751/.749) 18,62/18,47 (.733/.727) INVOLUTE SPLINE 16/32 D.P. FLT ROOT 11 TEETH 3 PRESSURE NGLE No. 3 shaft extension No. 11 shaft extension NOTE: No. 3 shaft recommended nut torque 17 Nm (125 lb. ft.) 72
6 Typical Performance V1 Single Pumps Performance Constants: Oil temp. 49 C (12 F), viscosity 32 cst (15 38 C (1 F), inlet pressure zero INPUT HORSEPOWER kw (hp) 14,9 ( 2) 13,4 (18) 11,9 (16) 1,4 (14) 8,9 (12) 7, 6, (8) 4,5 (6) 3, (4) 1,5 (2) 3 GPM RING 172 R (25 PSI) 69 R(1 PSI) 7 R (1 PSI) 1 & 3 GPM RINGS 1 GPM RING 172 R (25 PSI) 69 R(1 PSI) 7 R (1 PSI) 38 (1) 3 (8) 3 GPM RING 172 R (25 PSI) 69 R(1 PSI) 7 R (1 PSI) 1 & 3 GPM RINGS 1 GPM RING 172 R (25 PSI) 69 R(1 PSI) 7 R (1 PSI) INPUT HORSEPOWER kw (hp) INPUT HORSEPOWER kw (hp) 19,4 (26) 17,9 (24) 16,4 (22) 14,9 (2) 13,4 (18) 11,9 (16) 1,4 (14) 8,9 (12) 7, 6, (8) 4,5 (6) 3, (4) 1,5 (2) 17,9 (24) 16,4 (22) 14,9 (2) 13,4 (18) 11,9 (16) 1,4 (14) 8,9 (12) 7, 6, (8) 4,5 (6) 3, (4) 1,5 (2) , 4 & 6 GPM RINGS 6 GPM RING 152 R (22 PSI) 6 GPM RING 69 R (1 PSI) 4 GPM RING 172 R (25 PSI) & 7 GPM RINGS 5 GPM RING 172 R (25 PSI) 7 GPM RING 138 R (2 PSI) GPM RING 69 R (1 PSI) 2 GPM RING 172 R (25 PSI) 2 GPM RING 69 R (1 PSI) 6 GPM RING 7 R (1 PSI) 4 GPM RING 7 R (1 PSI) 2 GPM RING 7 R (1 PSI) 7 GPM RING 69 R (1 PSI) 5 GPM RING 69 R (1 PSI) 7 GPM RING 7 R (1 PSI) 5 GPM RING 7 R (1 PSI) 61 (16) 57 (15) 53 (14) 49 (13) 45 (12) 42 (11) 38 (1) 3 (8) 7 (2) 64 (17) 61 (16) 57 (15) 53 (14) 49 (13) 45 (12) 42 (11) 38 (1) 3 (8) , 4 & 6 GPM RINGS 6 GPM RING 7 R (1 PSI) 69 R (1 PSI) 152 R (22 PSI) 4 GPM RING 7 R (1 PSI) 69 R (1 PSI) 172 R (25 PSI) 2 GPM RING 7 R (1 PSI) 69 R (1 PSI) 172 R (25 PSI) GPM RING 7 R (1 PSI) 69 R (1 PSI) 138 R (2 PSI) 5 & 7 GPM RINGS 5 GPM RING 7 R (1 PSI) 69 R (1 PSI) 172 R (25 PSI)
7 V2 Single Pumps Performance Constants: Oil temp. 49 C (12 F), viscosity 32 cst (15 38 C (1 F), inlet pressure zero 7 & 13 GPM RINGS bar (PSI) CODE 16 (28) 98 (26) 7 (1) 7 (1) 15 (22) 13 9 & 11 GPM RINGS bar (PSI) CODE 91 (24) 83 (22) 91 (24) 83 (22) 7 (1) 7 (1) 175 (25) (2) 76 (2) 7 (1) 7 (1) 9 68 (18) 61 (16) 53 (14) 45 (12) 38 (1) 7 (1) 7 (1) 175 (25) 7 68 (18) 61 (16) 53 (14) 45 (12) 38 (1) 175 (25) 3 (8) 3 (8) INPUT HORSEPOWER kw (HP) 29,8 (4) 26,1 (35) 22,4 (3) 18,6 (25) 14,9 (2) 11,2 (15) 7,5 (1) 3,7 (5) 7 & 13 GPM RINGS bar (PSI) CODE 9 & 11 GPM RINGS bar (PSI) CODE (22) 7 (1) 7 (1) 7 (1) 175 (25) 7 (1) INPUT HORSEPOWER kw (HP) 29,8 (4) 26,1 (35) 22,4 (3) 18,6 (25) 14,9 (2) 11,2 (15) 7,5 (1) 3,7 (5) (25) 175 (25) 7 (1) 7 (1) 7 (1) 7 (1) 74
8 Typical Performance Performance Constants: Oil temp. 49 C (12 F), viscosity 32 cst (15 38 C (1 F), inlet pressure zero 98 (26) bar (PSI) CODE 91 (24) 7 (1) 7 (1) 15 (22) (22) 76 (2) 68 (18) 61 (16) 53 (14) 45 (12) 7 (1) 7 (1) 175 (25) 7 (1) 7 (1) 175 (25) (1) 3 (8) bar (PSI) CODE INPUT HORSEPOWER kw (HP) 29,8 (4) 26,1 (35) 22,4 (3) 18,6 (25) 14,9 (2) 11,2 (15) 7,5 (1) 3,7 (5) 15 (22) 175 (25) 175 (25) 7 (1) 7 (1) 7 (1) 7 (1) 7 (1) 7 (1) 75
9 Priority Valve Models V1P Single Pumps 3 (8) 7 R (1 PSI) 14 R (2 PSI) NO. 6 ORIFICE CONTROLLED FLOW TO PRIORITY CIRCUIT l/min (USgpm) 7 R (1 PSI) 14 R (2 PSI) 7 R (1 PSI) 14 R (2 PSI) 7 R (1 PSI) 14 R (2 PSI) 7 R (1 PSI) 14 R (2 PSI) NO. 3 ORIFICE NO. 1 ORIFICE NO. 4 ORIFICE NO. 2 ORIFICE 8 (2) 11 (3) V2P Single Pumps CONTROLLED FLOW TO PRIORITY CIRCUIT l/min (USgpm) 15 (4) 42 (11) 38 (1) 3 (8) 19 (5) 23 (6) 27 (7) 3 (8) 34 (9) NOTE: 12 & 13 RINGS RE RTED T 15 R (22 PSI) PRIMRY 7 R (1 PSI) SECONDRY 175 R (25 PSI) PRIMRY 175 R (25 PSI) SECONDRY 7 R (1 PSI) 38 (1) 42 (11) 45 (12) TOTL PUMP 49 (13) 53 (14) NO. 6 ORIFICE NO. 4 ORIFICE 57 (15) 61 (16) NO. 8 ORIFICE 64 (17) NO. 2 ORIFICE 4 (2) 15 (4) 23 (6) 3 (8) 38 (1) 45 (12) 53 (14) 61 (16) 68 (18) TOTL PUMP 76 (2) 83 (22) 91 (24) 98 (26) 16 (28) 76
10 Typical Performance Flow Control Models V1F & V2F Single Pumps CONTROLLED FLOW l/min (USgpm) 3 (8) NO. 8 ORIFICE NO. 4 ORIFICE NO. 6 ORIFICE NO. 2 ORIFICE 11 (3) 19 (5) 27 (7) 34 (9) 42 (11) 49 (13) 57 (15) 64 (17) 72 (19) 8 (21) 87 (23) 95 (25) 12 (27) TOTL PUMP Speed Correction Curves V1 &V2 Single Pumps Maximum operating speeds shown on performance curves are for pumps operating at psi inlet condition. To compute maximum operating speeds at other inlet conditions, use appropriate speed rating correction factor. bar in. Hg,14,7,17,1,7,14,21,28, SPEED RTING CORRECTION FCTOR bar Example: Max. psi inlet 27 r/min Correction 5 in. Hg x.93 Max. 5 in. Hg inlet 2511 r/min VCUUM SUPERCHRGE PRESSURE psi Pump inlet suction should not exceed 5 in. Hg vacuum. Positive pressure on inlet should not exceed,7 bar (1 psi). 77
V10 & V20 Single Vane Pump
ENGINEERING DATA V10 & V20 Single Vane Pump Versatile Reliable High Performance Low Cost w w w. F l u i D y n e F P. c o m E m a i l : c s @ F l u i D y n e F P. c o m V10 & V20 Single Vane Pump Versatile
More informationDouble Pump Operating Specifications
Double Pump Operating Specifications Shaft End Pump Cover End Pump Typical Typical Typical Typical del. input del. input Delivery L/min kw Delivery L/min kw USgpm @ (USgpm) (hp) USgpm @ (USgpm) (hp) 12
More informationFIXED DISPLACEMENT VANE PUMPS
FIXED DISPLACEMENT VANE PUMPS Single Vane Pumps Double Vane Pumps Thru-Drive Vane Pumps HS - HQ - VH - SERIES Working pressure: up to 210 bar Displacements: from 3 cc to 200 cc Pumps, cartridges and spare
More informationVickers. Vane Pumps. Single and Double Vane Pumps. Model Series V10, V20, V2010, and V2020 for Industrial Equipment.
Vickers Vane Pumps Single and Double Vane Pumps Model Series V10, V20, V2010, and V2020 for Industrial Equipment Revised 1/95 698 Introduction Series V10, V20, V2010, and V2020 fixed displacement pumps
More informationHigh Speed, High Pressure Vane Motors
ENGINEERING DATA High Speed, High Pressure Vane Motors M - Motors 25M, 35M, 45M, 5M w w w. F l u i D y n e F P. c o m E m a i l : c s @ F l u i D y n e F P. c o m Dependable Versatile The M Motor is a
More informationMOVICONTROL. Single and Double Fixed Vane Pumps SERIES V10, V20, 25V/VQ, 35V/VQ, 45V/VQ.
Single and Double Fixed Vane Pumps SERIES V10, V20, 25V/VQ, 35V/VQ, 45V/VQ www.movicontrol.com.br V10/V20 Series Features Balanced vane type pumps are excellent for medium- to low-pressure mobile and industrial
More informationSeries PHP10 Variable Volume, Piston Pumps
Catalog HY13-1553-1/N,EU Series PHP1 Series PHP1 Variable Volume, Piston Pumps Bulletin 2-18/US 123 Catalog HY13-1553-1/N,EU Series PHP1 Performance Information Series PHP1 Pressure Compensated, Variable
More informationIFP VTM42 POWER STEERING PUMPS
IFP VTM42 POWER STEERING PUMPS * Compact Power Source for Steering Assemblies * Integral Relief and Flow Control * High Efficiency * Balanced Cartridge Design * Quiet Operation IFP Power Steering Pump
More informationVickers. Piston Motors. Inline Piston Motors. Fixed and Variable Displacement. Revised 5/99 691
Vickers Piston Motors Inline Piston Motors Fixed and Variable Displacement Revised 5/99 691 Table of Contents Introduction........................................................................................
More informationPVE 19 & 21 Piston Pumps
Engineering PVE 19 & 21 Piston Pumps Pressures to 3500 psi For Mobile and Industrial Use Same Day Shipments Rated for 2400 rpm > Speeds to 2400 rpm www.fluidynefp.com Table of Contents Introduction...2
More informationPVX-11 VANE PUMPS. See pages 12 thru 14 for PVX-11 dimensions. VARIABLE DISPLACEMENT, PRESSURE COMPENSATED PERFORMANCE SPECIFICATIONS
PVX-11 VANE PUMPS VARIABLE DISPLACEMENT, COMPENSATED NOTE: See pages thru 14 for PVX-11 dimensions. PERFORMANCE SPECIFICATIONS Displacement (Nominal) 1.5 in 3 /rev. (25 cm 3 /rev.) Displacement (Actual)
More informationVickers. Vane Pumps. Double Thru-drive Vane Pumps. High speed, high pressure VQT Series for mobile equipment. Released 7/93
Vickers Vane Pumps Double Thru-drive Vane Pumps High speed, high pressure VQT Series for mobile equipment Released 7/93 612 Introduction Double VQT high performance pumps are fixed displacement units that
More informationPerformance Information Series PVP 100/140 Pressure Compensated, Variable Volume, Piston Pumps
Catalog HY13-155-2/US Technical Information Series PVP 1/14 Performance Information Series PVP 1/14 Compensated, Variable Volume, Piston Pumps Features High Strength Cast-Iron Housing for Reliability and
More informationVickers. Service Data. Vane Pumps. Vane Type Triple Pump (F3) 2520VQSV10* ***** ******* 20* M 2492 S. Released
Service ata Vickers Vane Pumps Vane Type Triple Pump (F3) 2520VQSV10* ***** ******* 20* Released 08 01 95 M 2492 S 10 SE rated capacity (V10 cover end cartridge) USgpm Rotor Vane Kit Ring Pin Pin olt olt
More informationVickers. Service Data. Vane Pumps. Vane Type Triple Pump (F3) 4525VQSV10* ***** ******* 20* Released M 2496 S
Service ata Vickers Vane Pumps Vane Type Triple Pump (F3) 4525VQSV10* ***** ******* 20* Released 08 01 95 M 2496 S 10 SE rated capacity (V10 cover end cartridge) USgpm Rotor Vane Kit Ring Pin Pin olt olt
More information10,000 Series. Highlights C-6
Highlights Features higher flows Benefits demanding mobile and industrial applications from Applications Description This is the biggest disc valve motor of our line with up to 45 GPM and 24,000 in-lb
More informationSolutions. ydraulics. We Manufacture. H y d r a u l i c s. Eaton. h y d r a u l i c s. Variable Displacement Piston Pump.
H y d r a u l i c s ydraulics Eaton h y d r a u l i c s Variable Displacement Piston Pump Manual Controlled Servo Controlled We Manufacture Model 70160 20, cm /r [1.24 in /r] 2,6 cm /r [1.44 in /r] Model
More informationSolutions. We Manufacture. i Hydraulics. Eaton. Variable Displacement Piston Pump. Manual Controlled
Eaton s y c h Variable Displacement Piston Pump i Hydraulics d r Manual Controlled l a Model 70160 20, cm/r [1.24 in/r] 2,6 cm/r [1.44 in/r] u u l Model 7060 40,6 cm/r [2.48 in/r] 49,2 cm/r [.00 in/r]
More informationPowrFlow PVX Vane Pumps
PowrFlow PVX Vane Pumps POWRFLOW PVX VANE PUMPS YOUR SOURCE FOR VANE PUMPS FOR THE MOST DEMANDING APPLICATIONS What Makes PowrFlow PVX Vane Pumps Your Best Buy? Continental Hydraulics PowrFlow PVX Vane
More informationSeries PVP Variable Volume, Piston Pumps
Catalog HY13-1553-1/N,EU Series PVP Variable Volume, Piston Pumps Catalog 26-12-1/US hpm12-1.p65, lw, jk 57 Catalog HY13-1553-1/N,EU hpm12-1.p65, lw, jk 58 Catalog HY13-1553-1/N,EU Introduction Series
More informationDisc Valve Hydraulic Motors 2000 Series
Disc Valve Hydraulic Motors 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Highlights Port A Features Three zone design for longer life and true bi-directionality.
More informationPerformance Information Series PVP 41/48 Pressure Compensated, Variable Volume, Piston Pumps
Catalog HY13-1553-1/N,EU Technical Information Performance Information Compensated, Variable Volume, Piston Pumps Features High Strength Cast-Iron Housing for Reliability and Quiet Operation Vickers Porting
More informationCatalog PowrFlowTM PVX Vane Pumps
Catalog PowrFlowTM PVX Vane Pumps Your source for vane pumps for the most demanding applications. What Makes PowrFlow PVX Vane Pumps Your Best Buy? Continental Hydraulics PowrFlow PVX Vane Pumps deliver
More information6000 Series Highlights
Highlights Features 9 displacements available Presents a multitude of options that make this motor very smart and flexible to apply Benefits Very tough motor for demanding applications Can be used in a
More informationDisc Valve Hydraulic Motors Series 6000
Disc Valve Hydraulic Motors Series 6000 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Highlights Features 9 displacements available Presents a multitude
More informationCatalog HY /NA. Catalog HY /NA. Parker Hannifin Corporation Hydraulic Pump Division Marysville, Ohio USA
Catalog HY28-6/NA PV, PVT Series Piston Pumps Variable Volume Catalog HY28-6/NA 1 Catalog HY28-6/NA Notes Series PV 2 Catalog HY28-6/NA Introduction Series PV Quick Reference Data Chart Pump Delivery Approx.
More informationP.C. Priority Flow Control Valve Series J02D3. General Description
CV Catalog HY15-352/US General Description Needle Type, Compensated Regulator Valve. For additional information see Tips on pages 1-4. P.C. Priority Control Valve Series J2D3 Features Good adjustment from
More informationSeries PVP Variable Volume Piston Pumps
Series PVP Variable Volume Piston Pumps Catalog HY28-2661-CD/US zp2 hpm12-1.p65, lw, jk 1 Notes Series PVP hpm12-1.p65, lw, jk 2 Introduction Series PVP Series Sizes 6-14 Phased Out For Reference Only
More informationVane Pumps. VMQ Series Vane Pumps For Industrial and Mobile Applications Displacements to 215 cm 3/ r (13.12 in 3 /r) Pressures to 260 bar (3800 psi)
Vickers Vane Pumps VMQ Series Vane Pumps For Industrial and Mobile Applications Displacements to 215 cm 3/ r (13.12 in 3 /r) Pressures to 260 bar (3800 psi) 5008.00/EN/0596/A A.25 Introduction From the
More information6000 Series. Highlights C-5. Description With torque up to 15,000 in-lb and 40 gpm continuous, this motor is packed with power operates very smoothly.
Highlights Features 9 displacements available Presents a multitude of options that make this motor very smart and flexible to apply Benefits Very tough motor for demanding applications Can be used in a
More informationVariable Displacement Piston Pumps. Performance Information. Features. Specifications. Controls. Schematic Symbol (Basic Pump) Weight and Package Size
Catalog HY13-1552-2/US Technical Information Series PVC65 Performance Information Series PVC65 Compensated, Variable Volume, Piston Pump Features High Strength Cast-Iron Housing uilt-in Supercharger High
More information3500 PSI Fixed Displacement Mobile Vane Pumps VQH Series (Supplement to Catalog 353)
3500 PSI Fixed Displacement Mobile Vane Pumps VQH Series (Supplement to Catalog 353) Single 35VQH Double 3525VQH Thru-Drive 35VQHT*S Single and Thru- Drive Pumps VQH Series fixed displacement single and
More informationHPV-10 AXIAL PISTON PUMPS
SPECIFICATIONS Variable Displacement, Pressure Compensated OVERALL EFFICIENCY EFFICIENCY - % 1 9 8 7 6 bar 34 69 13 138 172 27 241 TYPICAL PERFORMANCE SPECIFICATIONS VOLUMETRIC cu. in./rev. 1.26 DISPLACEMENT
More informationSolutions. We Manufacture. H y d r a u l i c s. Eaton Medium Duty Piston Pump. h y d r a u l i c s
H y d r a u l i c s ydraulics Eaton Medium Duty Piston Pump h y d r a u l i c s Model 70122, 70422, 70423, and 70523 or -Flow Compensated Piston Pumps We Manufacture April 1997 Solutions S o l u t i o
More informationPiston Pumps PVH Variable Displacement
Piston Pumps PVH Variable Displacement Model Code 1 2 3 4 5 6 7 8 9 10 11 12 13 14 1 Piston pump, variable displacement 2 Maximum geometric displacement 057 57.4 cm3/r [3.50 in3/r] 063 63.1 cm3/r [3.85
More informationMedium Duty Piston Pump Variable Displacement Closed Circuit
Medium Duty Piston Pump Variable Displacement Closed Circuit Model 70160 Model 70360 Model 72400 20.3 cm 3 /r [1.24 in 3 /r] 40.6 cm 3 /r [2.48 in 3 /r] 40.6 cm 3 /r [2.48 in 3 /r] 23.6 cm 3 /r [1.44 in
More informationHPV-15 AXIAL PISTON PUMPS
SPECIFICATIONS Variable Displacement, Pressure Compensated OVERALL EFFICIENCY EFFICIENCY - % 1 9 8 7 6 bar 34 69 13 138 172 27 241 TYPICAL PERFORMANCE SPECIFICATIONS VOLUMETRIC cu. in./rev. 2.9 DISPLACEMENT
More informationVIS (Valve-In-Star) Hydraulic Motor
VIS (Valve-In-Star) Hydraulic Motor VIS 30 Series VIS 40 Series VIS 45 Series The next step in the evolution of low speed high torque (LSHT) hydraulic motors. EATON Low Speed High Torque Motors E-MOLO-MC001-E5
More informationYMSY. Advanced design in disc distribution flow,which can automatically compensate in operating with high volume efficiency and long life.
The series motors adapts an advanced ROLLER gear set designed with disc distribution flow and high pressure. This motor series uses the ROTOR gear type manufactured with most advanced technology and quality
More informationHPV-15 AXIAL PISTON PUMPS
SPECIFICATIONS Variable Displacement, Pressure Compensated OVERALL EFFICIENCY EFFICIENCY - % 100 90 80 70 60 bar 0 34 69 103 138 172 207 241 TYPICAL PERFORMANCE SPECIFICATIONS VOLUMETRIC cu. in./rev. 2.09
More informationDisc Valve Hydraulic Motors 4000 Compact Series
Disc Valve Hydraulic Motors 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Port B Port A Features Shuttle Valve with Back- Pressure Relief Valve Highlights
More informationDisc Valve Hydraulic Motors Series 4000
Disc Valve Hydraulic Motors Series 0 10.20 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.20 EN EATON_Motoren english Highlights Features 10 displacements, a variety of mounting flanges
More informationD SERIES HYDRAULIC PUMP
uk distributor for D SERIES HYDRAULIC PUMP quality products for mechanical & fluid power jbj Techniques Limited, www.jbj.co.uk Introduction to Concentric D Series Hydraulic Pumps Concentric offers one
More informationDisc Valve Hydraulic Motors
Disc Valve Hydraulic Motors State of the art motors benefiting from years of experience and inovating constantly to fit your demands. C-i Disc Valve Hydraulic Motors Highlights Product Description In the
More informationAXIAL PISTON PUMPS SHPV SECTIONAL VIEW
AXIAL PISTON PUMPS SHPV SECTIONAL VIEW 2 SYSTEM CIRCUIT PUMP AND MOTOR CIRCUIT working loop (high pressure) working loop (low pressure) control fluid suction line case drain fluid Above figure shows schematically
More informationSuper Charged Piston Pumps Variable Displacement For Open Circuits. PAVC Medium Pressure
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding PAVC Medium Pressure Super Charged Piston Pumps Variable Displacement
More informationAXIAL PISTON MOTORS SHMF
SECTIONAL VIEW Purge relief valve High pressure relief valves (adjustable) Cylinder block assembly Shaft seal Output shaft Valve block Shuttle valve Swashplate 2 SYSTEM CIRCUIT PUMP AND MOTOR CIRCUIT working
More informationVeljan Gear Pumps. 'B' Series Features:
'' Series Features: Self-priming pumps Heavy duty sleeve bushing design in a small frame size Displacements from 9.8cc/rev to 39.9cc/rev Working pressures up to bar Speeds up to rpm Flows up to 10.5gpm
More informationPumps & Motors GRESEN INDEX
Pumps & Motors GRESEN INDEX Series Overview......................156-157 Pump and Motor Displacement Chart...158-159 General Product and Safety Information.....160 Torque Requirements & Overhang Data......161
More informationDisplacements cm 3 /r [in 3 /r] Design code [21.0] 400 [24.4] 434 [26.5] 480 [29.3] 677 [41.3] HP30 Motor
HP30 Motor Design code -003 Displacements cm 3 /r [in 3 /r] 344 [21.0] 400 [24.4] 434 [26.5] 480 [29.3] 677 [41.3] Engineered for performance For the past 55 years, Char-Lynn has been recognized as the
More informationGear Pumps and Motors Technical Catalog. Series 26 Pumps Series 26 Motors Series L2 Pumps
Gear Pumps and Motors Technical Catalog Series 26 Pumps Series 26 Motors Series L2 Pumps Table of Contents Series 26 Pumps Features...5 General Specifications and Performance Data...7 Performance Data
More informationVeljan Gear Pumps. E' Series Features:-
E' Series Features:- Heavy duty sleeve bushing design in a small frame size Displacements from 43.5cc/rev to 146.5cc/rev Working pressures up to 240bar Speeds up to 3500rpm Flows up to 38.7gpm High strength
More informationGear Housing Widths 1.00" 1.25" 1.50" 1.75" 2.00" 2.25" 2.50" Gear Housing Widths / Flow Rate [ VGP - D Series ]
'D' Series Features:- Heavy duty sleeve bushing design in a small frame size Displacements from 20.6cc/rev to 104.2cc/rev Working pressures up to 240bar Speeds up to 3500rpm Flows up to 27.5gpm High strength
More informationVickers. Vane Pumps. V Series - Low Noise Vane Pumps High Performance Intravane Pumps For Industrial Applications.
Vickers Vane Pumps V Series - Low Noise Vane Pumps High Performance Intravane Pumps For Industrial Applications Revised 6/95 560 Introduction Vickers offers the most complete line of hydraulic intravane
More informationGear Pumps and Motors
Gear Pumps and Motors Technical Catalog s Series 26 Motors Series L2 Pumps Table of Contents s Features...3 General Specifications and Performance Data...4 Performance Data Charts...5 Standard Catalog
More informationSolutions. ydraulics. We Manufacture. H y d r a u l i c s. Eaton. h y d r a u l i c s. L2 Series Model Gear Pumps. Gear Pumps.
H y d r a u l i c s ydraulics Eaton Gear Pumps h y d r a u l i c s L2 Series Model 25500 Gear Pumps We Manufacture No. 11-605 Revised March 1998 Solutions S o l u t i o n s L2 Series Model 25500 High Pressure
More informationJ Series (129-) Highlights
Highlights Features: Constant clearance Geroler set Integrated check valves Thrust Bearing Bushing Port B Port A Self-lubricating shaft bushing High-strength rigid components Increased valve seal lands
More informationW1200 SERIES HYDRAULIC PUMP
W1200 SERIES HYDRAULIC PUMP Concentric A Innovation in Hydraulics Table of Contents Description Page Number W1200 Product Specifications and Performance Information -----------------------------------------------------------------------3
More informationMedium Duty Piston Pump Variable Displacement Piston Pump
Medium Duty Piston Pump Variable Displacement Piston Pump Model 70160 Model 70360 Model 72400 20,3 cm 3 /r [1.24 in 3 /r] 40,6 cm 3 /r [2.48 in 3 /r] 40,6 cm 3 /r [2.48 in 3 /r] 23,6 cm 3 /r [1.44 in 3
More informationIFP BMG HIGH TORQUE LOW SPEED MOTORS
IFP BMG HIGH TORQUE LOW SPEED MOTORS High Performance in an economical package International BMG motors provide high output torque from an efficient compact design.motors are available with displacements
More information7/8-14 SAE 1/2" NPT 1/2" BSP Flange Mount BMG 98 BMG 61 BMG 76
IFP HIGH TORQUE LOW SPEED MOTORS High Performance in an economical package International motors provide high output torque from an efficient compact design. Motors are available with displacements from
More informationHPVR-10 AXIAL PISTON PUMPS
The HPVR series of inline axial piston variable displacement pumps, are available in five displacements and three compact frame sizes. These pumps feature medium-high working pressure capabilities that
More informationSuper Charged Piston Pumps Variable Displacement For Open Circuits. PAVC Medium Pressure
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding PAVC Medium Pressure Super Charged Piston Pumps Variable Displacement
More informationVane Pumps & Parts V10/V10F/NF/P V20/V20F/NF/P V2010*, V2020*F/NF/P
Vane Pumps & Parts V10/V10F/NF/P V20/V20F/NF/P V2010*, V2020*F/NF/P Standards and Specials - including Caterpillar Pumps Available in Industrial Version, Single & Double Units Left and Right Hand Rotations,
More informationW1500 SERIES HYDRAULIC PUMP
W1500 SERIES HYDRAULIC PUMP Concentric AB Innovation in Hydraulics PRESSURE (P1) 276 BAR (4000 PSI) (P2) 300 BAR (4400 PSI) SPEED 3300 RPM Min. 500 RPM at 4000 PSI (276 BAR) Continuous EFFICIENCY Overall
More informationSINGLE VANE PUMPS. BH*, V* and DT6/7 single vane pumps DATA SHEET
SINGLE VANE PUMPS BH*, V* and DT/7 single vane pumps BH* SINGLE VANE PUMPS BH*SINGLE VANE PUMP ORDERING CODE F BHQ 7 D 1 A 1 7 1- F means special seals for fire-resistant fluids. Omit if not required.
More informationSpool Valve Hydraulic Motors Series J
Spool Valve Hydraulic Motors Series J 10.201 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.201 EN EATON_Motoren J Series english J Series Highlights Thrust Bearing Bushing Port B Port
More informationTable of Contents. H Series Variable Displacement Piston Pumps
Table of Contents H Series Variable Displacement Piston Pumps Principles of Operation....................................................................................3 Hydraulic System Design Calculations........................................................................4
More informationW1200 SERIES HYDRAULIC PUMP
W1200 SERIES HYDRAULIC PUMP HYDRAULIC SYSTEMS DIVISION Outstanding Hydraulic Products, Service and Expertise, Worldwide 2 Table of Contents Description Page Number W1200 Product Specifications and Performance
More informationVariable Displacement Piston Pumps for Industrial Applications
Vickers Piston Pumps Variable Displacement Piston Pumps for Industrial Applications PVQ2 Family 21,1 to 141 cm 3 /r (1.29 to 8.64 in 3 /r) Displacements 23 bar (33 psi) Max. Pressure 514./EN/598/A Introduction
More informationWhisper Pumps VPV Vane Pumps
Whisper Pumps VPV Vane Pumps Contents Whisper Vane Pump Catalog 3 Contents Introduction 4 Benefits 4 Specifications 5 Ordering details 8 Performance characteristics 12 VPV 16 to PSI (21 Bar) 12 VPV 25
More informationSolutions. ydraulics. We Manufacture. H y d r a u l i c s. Eaton Gear Pumps. h y d r a u l i c s. Series 26 Model Gear Pumps.
H y d r a u l i c s ydraulics Eaton Gear Pumps h y d r a u l i c s Series 26 Model 26 Gear Pumps We Manufacture No. 11-69 Rev. November 1997 Quiet Operation Improved Efficiency Field Reversible Solutions
More informationSeries 20 Axial Piston Pumps. Technical Information
Series 20 Axial Piston Pumps Technical Information General Description INTRODUCTION Sauer-Danfoss a world leader in hydraulic power systems has developed a family of axial piston pumps. DESCRIPTION Sauer-Danfoss
More informationVickers Vane Pump & Motor Design Guide For Mobile Equipment
Vickers Vane Pump & Motor Design Guide For Mobile Equipment The Power of One Eaton HANSEN GROMELLE There s a certain energy at Eaton. It s the power of integrating the competencies of some of the world
More informationVIS 40 Series Two-speed
Specifications Back Pressure Relief Shuttle Selector Plate Plate Balance Plate Face Seal Mounting Flange End Cap Front Retainer Seal Guard Output Shaft Selector Geroler Drive Bearings Shaft Seal VIS 40
More informationVHO Vane Pumps ENGINEERING DATA. Single, Double, Triple & Thru Drive Available Multiple Displacements Low Cost Alternative Proven Performance
ENGINEERING DATA VHO Vane Pumps Single, Double, Triple & Thru Drive Available Multiple Displacements Low Cost Alternative Proven Performance www.fluidynefp.com Table of Contents Performance Data...2 Model
More informationHigh Torque Vane Motor MV015 Series Technical Data Sheet
High Torque Vane Motor MV15 Series Technical Data Sheet R 1551 Edition: 213-11 Maximum operating pressure: 3 psi (27 bar) Code 61 Features Use: Medium speed, high torque applications requiring reliability
More informationBML S K IFP BML HIGH TORQUE LOW SPEED MOTORS. Model code. Model. High Performance in an economical package
IFP HIGH TORQUE LOW SPEED MOTORS High Performance in an economical package International motors provide high output torque from an efficient compact design. Motors are available with displacements from
More information1500 Series. Roller Bearing Gear Pumps and Motors (Bi-Rotational) High Performance Features: Hydreco
Roller Bearing Gear Pumps and Motors (Bi-Rotational) High Performance Features: The 1500K Series Pump/Motor utilizes the many design and application features of the widely accepted HYDRECO Series modern
More informationAXIAL PISTON PUMPS SHPV SECTIONAL VIEW
AXIAL PISTON PUMPS SHPV SECTIONAL VIEW 2 AXIAL PISTON PUMPS SHPV SYSTEM CIRCUIT PUMP AND MOTOR CIRCUIT working loop (high pressure) working loop (low pressure) control fluid suction line case drain fluid
More informationFEATURES SPECIFICATIONS
RS 1 FETURES 2 3 1 High Pressure Viton Shaft Seal offers superior seal life and performance and eliminates the need for case drain. 2 Pressure Fed earing surface receives positive flow of clean, cool oil.
More information8000 Series Open Loop Pumps
Table of Contents Features and enefits 2 Specifications 3 Shaft Torque Ratings 4 Pressure Pick-ups 4 Controls Pressure Compensator 5 Dual Pressure Compensator 5 Soft Start Pressure Compensator 6 Load Sensing
More informationHigh Torque Vane Motor MV037 Series Technical Data Sheet
High Torque Vane Motor MV37 Series Technical Data Sheet R 155 Edition: 213-1 Replaces: 212-1 Maximum operating pressure: 3 psi (27 bar) Code 61 45 psi (31 bar) Code 62 Features Use: Medium speed, high
More informationVariable displacement axial piston pumps,
ariable displacement axial piston pumps, for open circuit DISPLACEMENTS From To 2.75 in 3 /rev (45 cm 3 /rev) 5.12 in 3 /rev (84 cm 3 /rev) MAX SPEED 3000 min -1 PRESSURE Max. continuous Max. intermittent
More informationFIXED DISPLACEMENT HYDRAULIC VANE PUMPS SERIE BQ
FIXED DISPLACEMENT HYDRAULIC VANE PUMPS SERIE BQ BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps.
More informationYMTE SPECIFICATION DATA
SPECIFICATION DATA For individual motor performance charts consult equivalent YMT series data DISTRIBUTION TYPE GEOMETRIC DISPLACEMENT MAX. SPEED RPM MAX. TORQUE [IN. LB.] N*M MAX. OUTPUT [HP] KW MAX.
More informationFIXED DISPLACEMENT HYDRAULIC VANE PUMPS SERIE BV
FIXED DISPLACEMENT HYDRAULIC VANE PUMPS SERIE BV BV FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BV SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps.
More informationFIXED DISPLACEMENT HYDRAULIC VANE PUMPS BV SERIES
BV FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BV SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
More informationV* THRU DRIVE SINGLE VANE PUMPS ORDERING CODE
V* ORDERING CODE 1 - "F3" means special seals for fire-resistant fluids. Omit if not required 2 - Pump Type: F3 VS 7T C 60 D 86 A A 1 2 3 4 5 6 7 8 9 VS = 12 vane pump, industrial use (very quiet), UNC
More information9 Shaft type N = Metric, to DIN/ISO 3019, Part 2 and VDMA 24560, Part 1 Y = SAE models P*B5 to 15 only. Omit for 20 thru 90 models
Model Codes P *** -(F)-(M) * *(F)(X) (*)-** -**-(C)-(G)-(L)- ** -**** 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1 F V asic models = Fixed displacement type = Variable displacement type 2 Displacement PF and
More informationFIXED DISPLACEMENT HYDRAULIC VANE PUMPS SERIE BQ
FIXED DISPLACEMENT HYDRAULIC VANE PUMPS SERIE BQ BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps.
More informationF SERIES GEAR PUMP. 2 Muncie Power Products, Inc Muncie Power Products, Inc.
ALL NEW DESIGN F SERIES GEAR PUMP ALL NEW DESIGN Ultimate power and performance in a small package best describes the all new F Series gear pumps. Designed exclusively for those low flow applications.
More informationHigh Pressure Gear Pumps & Motors Series PZG Pumps Series MZG Motors
High Pressure Gear Pumps & Motors Series PZG Pumps Series MZG Motors Bulletin 650-Z1 High Pressure Gear Pumps and Gear Motors for today s demanding mobile and industrial applications. The PZG and MZG Series
More informationVickers. Service Data. Vane Pumps. Thru Drive Vane Type Pump (F3) 25VT*(M) **A(M)2 ** * 22 * I-3154-S. Rev. 2/98
Service Data Vickers Vane Pumps Thru Drive Vane Type Pump (F3) 25VT*(M) **A(M)2 ** * 22 * Rev. 2/98 I-3154-S MODEL VTA VTB VTBP ADAPTER ADAPTER PLATE KIT 584936 941296 584922 941297 FOR BP MODELS AN ADAPTER
More informationVickers 45. VMQ Series 30 Vane Pumps. Fixed Displacement, For Industrial and Mobile Applications (4.188)
[ (4.188) 49,4 (1.94) /21,8 /.86) 174,7/172,3 (6.88/6.78) 332,9/33,5 (13.11/13.1) "M" is marked if metric port threads No marking if inch port threads AS-568-152 O-ring Vickers 45 65,3 (2.57) 13 (5.1 VMQ
More informationAXIAL PISTON PUMPS AND MOTORS
HPV-HMF SERIES SECTIONA VIEW AXIA PISTON VARIABE DISPACEMENT PUMP AXIA PISTON FIXED DISPACEMENT MOTOR Purge relief valve High pressure relief valves (adjustable) Cylinder block assembly Shaft seal Output
More informationGear Pumps. Series PGP Fixed Displacement Pumps, Cast-Iron Designs
Gear Pumps Series PGP Fixed Displacement Pumps, Cast-Iron Designs aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Table
More informationPiston Pumps Series P2 / P3 Variable Displacement
Piston Pumps Series P2 / P3 Variable Displacement Catalogue HY11-2600/UK July 2003 Contents Series P2/P3 Description Technical information 3 Ordering code 4 Control options LA and LB 6 Control options
More informationSeries 20 Axial Piston Pumps. Technical Information
Series 20 Axial Piston Pumps Technical Information General Description INTRODUCTION Sauer-Danfoss a world leader in hydraulic power systems has developed a family of axial piston pumps. DESCRIPTION Sauer-Danfoss
More informationChar-Lynn HP 30 Motor
Char-Lynn HP 30 Motor Displacements cm 3 /r (in 3 /r) 344 (21.0) 400 (24.4) 434 (26.5) 480 (29.3) 677 (41.3) Engineered for Performance For the past 45 years, Char-Lynn has been recognized as the industry
More information