ZRV. Direct Operated Check Valve Series ZRV (Denison)

Transcription

1 Characteristics / Ordering Code Direct Operated Check Valve Series ZRV (Denison) Direct operated check valves series ZRV have a cartridge type insert to provide zero leakage and high life time. he check function can be located in the P- or in the -port. Features Leakage-free seat High life time Opening pressure 0.5 bar Sizes - ZRV01 - NG06 / CEOP3 - ZRV02 - NG10 / CEOP5 ZRV-P02 P ZRV-P02 echnical data ZRV-P02 General Size DIN Mounting interface ISO 4401 NFP D03 CEOP RP 121 Mounting position unrestricted mbient temperature [ C] DIN ISO 4401 NFP D05 Weight [kg] Hydraulic Max. operating pressure [bar] Nominal flow [l/min] Opening pressure [bar] Fluid Hydraulic oil as per DIN Fluid temperature [ C] Viscosity permitted [mm 2 /s] Viscosity recommended [mm 2 /s] 30 Filtration ISO 4406 (1999) 18/16/13 (acc. NS 1638: ) Ordering code ZRV Check valve, direct operated Pressure control Nominal size Code P Press. control lockedinp locked in Code Nominal size 01 NG06 02 NG10 Ordering code details see end of chapter. ZRV_UK.INDD RH_

2 Characteristic Curves Direct Operated Check Valve Series ZRV (Denison) p/q performance curves ZRV*01 ZRV*02 ll characteristic curves measured with HLP46 at 50 C. ZRV_UK.INDD RH_

3 Dimensions Direct Operated Check Valve Series ZRV (Denison) ZRV01 Seal NR FPM Seal kit Order code SK-CM2-10 SK-CM2-V-10 ZRV02 Seal NR FPM Seal kit Order code SK-CM3-10 SK-CM3-V-50 ZRV_UK.INDD RH_

4 Ordering Code Details Direct Operated Check Valve Series ZRV (Denison) ZRV01 ZRV02 ZRV_UK.INDD RH_

5 Characteristics Series CPOM Pilot operated check valves from the Parker Manapak series CPOM are in sandwich design for easy configuration of stack systems. Depending on the function required, one or two pilot operated check valves are arranged in the ports and/or. he free flow direction is always from the valve side to the manifold side. Function he check valves open when flowing to the consumer side, where the opposing check valve is hydraulicallymechanically pilot operated simultaneously by a control spool, and thus the return flow is enabled from other consumer sides. CPOM3 Features he valve bodies of the Parker Manapak valve series CPOM are made of steel. he valve poppet is precisely guided into the steel sleeve and ensures a good seal on the seat. When the valve poppet is open, the large cross-section allows high flow rates at low differential pressure. Different control ratios can be chosen with the NG6 and NG10 valves. Pre-opening for CPOM*H to achieve smooth opening. echnical data General Series CPOM2 CPOM3 CPOM4 CPOM6 Nominal size Mounting pattern ISO 4401 mbient temperature [ C] MF D value [years] 150 Weight [kg] Hydraulic Max. operating pressure [bar] Opening pressure [bar] Opening ratio 1 : 3 or 1 : 1:3or1:6,5 1:13 1:3 Leakage on request Fluid Hydraulic oil acc. to DIN Fluid temperature [ C] Viscosity range, perm. [cst][mm²/s] rec. [cst][mm²/s] 30 Filtration ISO 4406: 18/16/13 (acc. to NS 1638: ) CPOM_UK.INDD RH_

6 Ordering Code Without pre-opening CPOM Series CPOM V Code Size 2 NG06 3 NG10 6 NG25 Hydraulically operated check valve pilot ratio 3 : 1 Size Poppet style Opening pressure Seal FPM Design series (not required for ordering) Code Pressure Size omit 1.0 bar 2, 3, bar bar 2 Code DD Connection only only and 0.0 bar 2 With pre-opening CPOM H Code Size 2 NG06 3 NG10 4 NG16 Hydraulically operated check valve Size Poppet style Pilot ratio Seal Design series (not required for ordering) Code N V Seal NR FPM Code DD Connection only only and Code Size Ratio 2 :1 H : :1 CPOM2 / CPOM3 CPOM4 / CPOM6 CPOM_UK.INDD RH_

7 Performance Curves Series CPOM p/q performance curves CPOM2 CPOM3 CPOM2 (type H) CPOM3 (type H) Pressure differential p [bar] Free flow against the spring pilot controlled flow Flow [l/min] ll characteristic curves measured with HLP46 at 50 C. CPOM_UK.INDD RH_

8 Performance Curves p/q performance curves CPOM4 (type H) Series CPOM CPOM6 ll characteristic curves measured with HLP46 at 50 C. CPOM_UK.INDD RH_

9 Dimensions CPOM2 34 Series CPOM P 130 Valve side 40 Seal kit CPOM2 Seal Order code V SK-CPOM2-V Manifold side CPOM P Valve side Seal kit CPOM3 Seal Order code V SK-CPOM3-V-11 Note: he O-ring plate for sealing the connecting surface of the manifold side is included. he O-ring plate and the positioning pin are always mounted on the manifold side. Manifold side CPOM_UK.INDD RH_

10 Dimensions CPOM Series CPOM P X Y Valve side CPOM6 Seal kit CPOM4 Seal Order code V SK-CPOM4HV Manifold side 11.5 P Y X 200 Valve side Seal kit CPOM6 Seal Order code V SK-CPOM6-V Note: he O-ring plate for sealing the connecting surface of the manifold side is included. he O-ring plate and the positioning pin are always mounted on the manifold side. 6.2 Manifold side CPOM_UK.INDD RH_

11 Characteristics Series ZRE (Denison) Pilot operated check valves series ZRE are designed for maximum flow rates and long life time. he valves are typically used in combination with spool type directional control valves to ensure nearly leak free positioning of the actuator. he inlet flow is free while the outlet flow is blocked. Pressure in the inlet line opens the check valve and allows free outlet flow. Features High flow capacity High life time Check function in, or + Sizes - ZRE01 - NG06 / CEOP3 - ZRE02 - NG10 / CEOP5 - ZRE03 - NG16 / CEOP ZRE-01 ZRE-02 Ordering code Code Press. control lockedin lockedin lockedin and Ordering code details see end of chapter. echnical data ZRE Check valve pilot operated Pressure control Nominal size Code Nominal size 01 NG06 02 NG10 03 NG16 ZRE-02 Design series Seal Code Design series D 06 E 10/16 Code Seal 1 NR 5 FPM General Size DIN Mounting interface ISO 4401 NFP D03 CEOP RP 121 Mounting position unrestricted mbient temperature [ C] ZRE_UK.INDD RH_ DIN ISO 4401 NFP D05 DIN ISO 4401 NFP D08 Weight [kg] Hydraulic Max. operating pressure [bar] up to Nominal flow [l/min] Opening ratio (pilot cone / main cone) 1:6 1:6 1:13 Opening pressure [bar] Leakage on request Fluid Hydraulic oil as per DIN Fluid temperature [ C] Viscosity permitted [cst]/[mm 2 /s] Viscosity recommended [cst]/[mm 2 /s] 30 Filtration ISO 4406 (1999) 18/16/13 (acc. NS 1638: ) -81

12 Characteristic Curves Series ZRE (Denison) p/q performance curves ZRE*01 ZRE*02 ZRE*03 ZRE_UK.INDD RH_ ll characteristic curves measured with HLP46 at 50 C. -82

13 Dimensions Series ZRE (Denison) ZRE* ZRE* P P 10.5 Seal kit Seal Order code Seal kit Seal Order code ZRE* P X Y 50 Seal kit Seal Order code ZRE_UK.INDD RH_

14 Ordering Code Details Series ZRE (Denison) ZRE*01 ZRE*02 ZRE*03 ZRE_UK.INDD RH_