IFP MPC(D)03 PILOT CHECK VALVE MODULE
|
|
- Teresa Hill
- 5 years ago
- Views:
Transcription
1 IFP MPC(D)03 PILOT CHECK MODULE ISO SIZE/NFPA D03 STEEL SEAT FOR LONG WEAR ZERO LEAKAGE DECOMPRESSION FEATURE C:\wliu\MPC.bmp MPC-03-W MPC-03-A MPC-03-B MPC (D) W - 1 MODULAR CHECK DECOMPRESSION FEATURE SIZE D03 CONTROL PORT W ~ A, B PORT A ~ A PORT B ~ B PORT CRACKING PRESSURE 1:2 TYPES MPC(D)-03-W-1-* A B MPC(D)-03-W-2-* A B SIZE D03 MAX. PRESSURE (PSI) 4500 PSI RATED FLOW 15 CRACKING PRESSURE (PSI) 5 65 PILOT PISTON 1 AREA RATIO 0.37 NEEDLE 0.06 WEIGHT lbs 2 IFP offers a pilot operated Check Valve module designed for use in applications requiring positive lock on a pressurized load, but will release the load upon application of pressure to the opposite port. Modules are available with dual or single service line versions. The use of modular design make compact hydraulic systems in which the modules are "sandwiched" between a directional valve and standard mounting surface.
2 IFP MPC(D)03 PILOT CHECK MODULE Viscosity ( SUS) MPC-03-W-* MPC-03-W-* Pressure Drop characteristic min. Pilot Pressure characteristic (type 1) (type 2) Pressure Drop (PSI) min. Pilot Pressure (PSI) Flow inlet pressure (PSI) for reversed free flow MPD-03-W -* MPD-03-W -* Pressure Drop characteristic min. Pilot Pressure characteristic 1 MAIN POPPET OPEN 2 SMALL POPPET OPEN (type 1) (type 2) Pressure Drop (PSI) min. Pilot Pressure (PSI) Flow inlet pressure (PSI) for reversed free flow
3 IFP MPC03 PILOT CHECK MODULE MPC-03-A-* MPD-03-A-* (Decomposition) NO. DESCRIPTION PART NO. 9 O-RING P18, O-RING P9, 90 Q'TY W A B MPC-03-*-* IFP
4 IFP MPC(D)05 PILOT CHECK MODULE ISO SIZE/NFPA D05 STEEL SEAT FOR LONG WEAR ZERO LEAKAGE DECOMPRESSION FEATURE C:\wliu\MPC05.bmp MPC-05-W MPC-05-A MPC-05-B MPC(D) W - 1 MODULAR CHECK DECOMPRESSION FEATURE SIZE D05 CONTROL PORT W ~ A, B PORT A ~ A PORT B ~ B PORT CRACKING PRESSURE 1:2 TYPES MPC(D)-05-W-1-* A B MPC(D)-05-W-2-* A B SIZE D05 MAX. PRESSURE (PSI) 4500 PSI RATED FLOW 30 CRACKING PRESSURE (PSI) 5 65 PILOT PISTON 1 AREA RATIO 0.37 NEEDLE 0.06 WEIGHT lbs 7.90 IFP offers a pilot operated Check Valve module designed for use in applications requiring positive lock on a pressurized load, but will release the load upon application of pressure to the opposite port. Modules are available with dual or single service line versions. The use of modular design makes compact hydraulic systems in which the modules are "sandwiched" between a directional valve and standard mounting surface.
5 IFP MPC(D)05 PILOT CHECK MODULE MPC(D)-05-W-1 Viscosity ( SUS) Pressure Drop characteristic min. Pilot Pressure characteristic (type 1) (type 2) Pressure Drop (PSI) min. Pilot Pressure (PSI) Flow reversed input port pressure (PSI) MPC-05-A-1 MPD-05-A-1 (Decomposition) NO. DESCRIPTION PART NO. QT'Y
6 IFP MPC(D)05 PILOT CHECK MODULE MPC(D)-05-*-* IFP
7 IFP MODULES APPLICATION GUIDELINES SOLENOID (D.G. Series) Pressure Reduing (MGV Series) Pilot Check Valve ( MPC Series) X WRONG CORRECT When using the MGV pressure reducing module with the MPC pilot check module in the same assembly, the MPC module should be closest to your actuator to obtain a leak free holding assembly SOLENOID (D.G. Series) Pilot Check Valve ( MPC Series) Flow Control (MTC Series) X WRONG CORRECT When using the MTC flow control module with the MPC pilot check module in the same assembly, the MTC module should be closest to the actuator, or the actuator will move iradically. SOLENOID (D.G. Series) Pressure Reduing (MGV Series) Flow Control ( MTC Series) X WRONG CORRECT When using the MGV pressure reducing module with the MTC Flow Control Module. The MTC Flow Control Module should be closest to your actuator or the back pressure created by the MTC will affect the pressure setting of the MGV pressure reducing.
8 IFP BOLT KITS DIRECTIONAL CONTROL S SIZE D03 BOLTS GRADE-12.9(ISO 898) DG03 DG MODULE DG MODULES DG MODULES DG MODULES METRIC M5-6G BKDG03M BKDG03M-1 BKDG03M-2 BKDG03M-3 BKDG03M-4 INCH UNC BKDG03S BKDG03S-1 BKDG03S-2 BKDG03S-3 BKDG03S-4 LENGTH (inches) 1 3/4 3 3/ /8 NOTE: Bolts should be torqued to lb/in SIZE D05 BOLTS GRADE-7 DG05 DG MODULE DG MODULES DG MODULES DG MODULES METRIC M6 BKDG05M BKDG05M-1 BKDG05M-2 BKDG05M-3 BKDG05M-4 INCH 1/4-24 UNC BKDG05S BKDG05S-1 BKDG05S-2 BKDG05S-3 BKDG05S-4 LENGTH (inches) 1 3/8 3 5/8 5 3/4 7 1/2 10 1/8 NOTE: Bolts should be torqued to lb/in
Check valve, pilot operated
Courtesy of CM/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) 46-5480 www.cmafh.com Check valve, pilot operated Type ZS Size 6 Component series 6X Maximum operating pressure
More informationCheck valve, pilot operated
RIES TECHNOLOGY s.r.l. Check valve, pilot operated RE 558/07.0 Replaces: 08.05 /8 Type ZS Size 6 Component series 5X Maximum operating pressure 35 bar [568 psi] Maximum flow 300 l/min [79. US gpm] K30/
More informationCheck valve, pilot operated
Check valve, pilot operated RE 564/07.0 Replaces: 08.05 /8 Type ZS Size 5 Component series 5X Maximum operating pressure 35 bar [4568 psi] Maximum flow 450 l/min [8.9 US gpm] H7685 Table of contents Contents
More informationCheck valve, pilot operated
Check valve, pilot operated RE 548/07.0 Replaces: 0.09 /8 Type ZS Size 6 Component series 6X Maximum operating pressure 35 bar [4568 psi] Maximum flow 60 l/min [5.8 US gpm] tb056 Table of contents Contents
More informationRev. E Sept 06. VP300 INSTRUCTION MANUAL Part # DISPENSING VALVE MODEL VP300 INSTRUCTION MANUAL
DISPENSING VALVE MODEL VP300 INSTRUCTION MANUAL CONTENTS 1 Introduction page 3 2 Specifications page 3 3 Part Description page 4 4 Operating Principles page 5 5 Operating Procedure 5-1 Setup page 6 5-2
More informationISO 4401 size 07; 315 bar (4500 psi); up to 200 L/min (53 USgpm) General Description
Vickers SystemStak SystemStak Valves ISO 441 size 7; 315 bar (45 psi); up to 2 L/min (53 USgpm) General Description This range of stackable hydraulic controls are designed to be mounted under a size 7
More informationPilot Operated Pressure Relief Valve Series R5V (Denison)
Characteristics Pilot operated pressure relief valves series R5V have a similar design to the subplate mounted R4V series. The SAE flanges allow to mount the valves directly on the outlet flanges of pumps
More informationZRV. Direct Operated Check Valve Series ZRV (Denison)
Characteristics / Ordering Code Direct Operated Check Valve Series ZRV (Denison) Direct operated check valves series ZRV have a cartridge type insert to provide zero leakage and high life time. he check
More information5.2 to 79 gpm 3000, 3600, 5000 psi
Modular Valve Series Modular Valve Series. to 79 gpm 000, 600, 000 Overview The modular valve is designed and engineered to integrate multiple hydraulic valve operations into a single unit, which eliminates
More informationVJL Functional Description. Ordering Code VJL Spare Parts HA /2002. Logical 3-way check valves. Replaces HA /2001
Logical 3-way check valves VJL2-304 HA 5007 3/2002 Size 04 p max up to 210 bar Q max up to 15 L/min Replaces HA 5007 6/2001 Screw-in cartridge valve For leak-free applications Simple design High reliability
More informationModular Throttle Valve MST MT MTC MCT Solenoid Operated Throttle Valve Throttle Valve Throttle and Check Valve Counter Restrictors Valve
Modular Throttle MST MT MTC MCT Solenoid Operated Throttle Throttle Throttle and Check Counter Restrictors Modular Relief MGS MBR MCB MRB MSV MRV Two Section Reducing Reducing Counter Balance Balance Sequence
More informationIFP FIXED DISPLACEMENT PISTON MOTORS MFB5/10/20/29
IFP FIXED DISPLACEMENT MOTORS MFB5/10/20/29 High Efficiency Wide Speed Range Extended Life Reversable Compact Quiet Operation High Operating Pressure C:\wliu\MFB1.bmp Piston Motor Ordering Specification
More informationVINCKE HYDRAULIC PUMPS
: VNK BA10VS 21 Variable displacement axial piston pump of swashplate design for hydraulic open circuit systems. Flow is proportional to drive speed and displacement. It can be infinitely varied by adjustment
More informationINSTALLATION DIMENSIONS
ACCESSORIES & OTHERS PRESURE GAGE INSTALLATION DIMENSIONS UNIT mm(inch) LM TYPE CBM TYPE CBM-F TYPE MODEL B B1 D D1 D2 G H T d R G40LM 28.1(0.86) φ48(1.9) φ41.7(1.6) 8(0.31) 58.7(2.31) 1/8" G40CBM 26(1.02)
More informationPilot operated check valves, Types SV and SL...40B/ (new series) Huade América 1
Pilot operated check valves, Types and...40b/ (new series) Huade América 1 BEIJING HUADE HYDRAULIC INDUSTRIAL GROUP CO.,LTD. Pilot operated check valves, Types and...40b/ (new series) Size 10 to 32 up
More informationVARIABLE DISPLACEMENT PISTON PUMPS HSP SERIES VERSION 31
JC T6C SERIES HIGH PERFORMANCE SINGLE VANE PUMPS hydraut.com Based on using petroleum oil at C (120 F), viscosity 32 cst at 38 C (150 SUS at 100 F), and 0 psi inlet pressure. VARIABLE DISPLACEMENT PISTON
More informationVALVES RANGE FOR OPEN LOOPS T E C H N I C A L C A T A L O G
VALVES RANGE FOR OPEN LOOPS T E C H N I C A L C A T A L O G Valves range for open loop 2 18/07/2017 Valves range for open loop CONTENT CHECK VALVES 5 Direct operated valves 7 Pilot operated valves 11 Counterbalance
More informationCheck valve. Type Z1S. Contents. Features. RE Edition: Replaces: 09.10
Check valve Type ZS RE 537 Edition: 05-06 Replaces: 09.0 Size 0 Component series 4X Maximum operating pressure 350 bar [5076 psi] Maximum flow 00 l/min [6.4 US gpm] H7647 Features Sandwich plate valve
More informationREPAIR PROCEDURES MANUAL
REPAIR PROCEDURES MANUAL PVX Series Vane Pumps A Design Series Step-by-Step Guide to Troubleshooting and Repairing PVX Series Vane Pumps Introduction Thank you for choosing Continental Hydraulics PVX Vane
More informationThrottle check valve. Type Z2FS. Features. Content. RE Edition: Replaces: 04.08
hrottle check valve ype Z2FS RE 27526 Edition: 205-0 Replaces: 04.08 Size 6 Component series 3X Maximum operating pressure 350 bar [5076 psi] Maximum flow 250 l/min [66 US gpm] tb022 Features Sandwich
More informationCHECK VALVE - DIRECT OPERATED - Series VC4V SPECIFICATIONS PERFORMANCE CURVES VC4V03 VC4V10 VC4V06
CHECK VLVE - DIRECT OPERTED - Series VV Veljan Direct operated Check Valve Series VV are poppet type and designed for a maximum pressure of 35 bar and a flow capacity rangg from 18 l/m for a 3/8 valve
More informationThrottle and throttle check valve
Throttle and throttle check valve RE 79/0.09 Replaces: 03.06 /6 Types MG and MK Size 6 to 30 Component series X Maximum operating pressure 35 bar Maximum flow 400 l/min K3564- Table of contents Contents
More informationCONTINENTAL HYDRAULICS LPV SERIES AXIAL PISTON PUMPS
CONTINENTAL HYDRAULICS LPV SERIES AXIAL PISTON PUMPS 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM LPV PUMPS FEATURES AND BENEFITS The LPV line of Variable
More informationD07 & D08. Series 35 Solenoid Valves D07 D Friendship Drive, Magnolia, TX Tel.: Fax:
GENERL FEURES SNDRD FEURES High ressure/ High Flow: 65 gpm/ psi ilot Operation: Main spool controlled by D0 solenoid pilot valve- allows for addition of modular valves to reduce shifting shock. Oil Immersed,
More informationCheck Type Prefill & Exhaust Valves
Check Type Prefill & Exhaust Valves Bulletin 86620 Table of Contents Performance Assurance page 3 PV Valves Features and Benefits 4-5 Specifications 6-7 Dimensions & Weights 8-12 Performance Curves 13-14
More informationPressure Control Valves. General Description. Specifications. Ordering Information
Catalog HY14-3000/US Technical Information Control Valves Series RCP General escription Series RCP in-line pressure control valves are chiefly used as remote control valves. They limit system pressure
More informationSY Series Scotch Yoke Actuators
SY Series Scotch Yoke Actuators Engineering Creative Solutions for Fluid Systems Since 1901 FEATURES MODULAR DESIGN The Pratt Industrial SY series scotch yoke actuator has a highly efficient and interchangeable
More informationPilot Operated Flow Control Valves / Pilot Operated Flow Control and Check Valves
FLOW CONTROLS Flow control of these valves is continuously made by a hydraulically operated pilot piston mechanism which controls opening area of the orifice of the valve. With the use of these valves,
More informationSpool Valve Hydraulic Motors. Spool Valve motors incorporate the proven orbit motor principle to provide high torque at low speeds.
Spool Valve Hydraulic Motors Spool Valve motors incorporate the proven orbit motor principle to provide high torque at low speeds. B-i Spool Valve Motors Highlights Product Description Char-Lynn spool
More informationVickers. Vane Pumps. Double Thru-drive Vane Pumps. High speed, high pressure VQT Series for mobile equipment. Released 7/93
Vickers Vane Pumps Double Thru-drive Vane Pumps High speed, high pressure VQT Series for mobile equipment Released 7/93 612 Introduction Double VQT high performance pumps are fixed displacement units that
More informationCONTINENTAL HYDRAULICS VAD05M-VMD05M - AIR & LEVER OPERATED DIRECTIONAL VALVES
CONTINENTAL HYDRAULICS VAD05M-VMD05M AIR & LEVER OPERTAED DIRECTIONAL VALVES 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM VAD05M-VMD05M AIR & LEVER OPERATED
More informationLOGIC POPPET VALVES AND CARTRIDGE MANIFOLD SYSTEMS
Fluid Power Specialist Since 1948 LOGIC POPPET VALVES AND CARTRIDGE MANIFOLD SYSTEMS Copyright 2018, Almo Manifold & Tool Co. All rights reserved. All attempts have been made to make the information in
More informationCheck valves Direct and pilot operated check valve functions for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm)
Hydraulic Screw-in Cartridge Valves (SiCV) Check valves Direct and pilot operated check valve functions for applications up to 5 bar (5 psi) and 7 L/min (6 USgpm) Check valves CHECK VALVES... -4 FPR -
More informationHIGH PRESSURE FILTERS HF4P Series Inline Filters 5000 psi up to 120 gpm
HIGH PRESSURE FILTERS HF4P Series Inline Filters 5000 psi up to 120 gpm Hydraulic Symbol A B Features Meets HF4 automotive standard Non-welded housing design reduces stress concentrations and prevents
More informationASP330F-01 ASP430F-02 ASP530F-03 ASP630F-04 ASP430F-F02 ASP530F-F03 ASP630F-F04 R 1/4 R 3/8 R 1/2 R 1/4 R 3/8 R 1/2 NPT 1/8 NPT 1/8 NPT 1/4
Pilot check valve and speed controller are combined. Realizes momentary intermediate stoppage of a cylinder and able to adjust speed control of it. Work piece Example of drop prevention circuit Tubing
More informationCheck Valves Check Valves are the simplest form of directional control valves, but they can also be used as pressure controls.
Check Valves Check Valves are the simplest form of directional control valves, but they can also be used as pressure controls. Standard Check Valve The standard check valve permits free flow in one direction
More informationPILOT OPERATED PRESSURE CONTROLS - FLANGED TYPE VR5 Series
PILOT OPERTED PRESSURE CONTROLS FLNGED TPE VR5 Series Veljan Flanged type, Valves Series VR5V ( Relief ), VR5U (Unloader) and VR5S (Sequence ) are pilot controls. These range of valves are suitable for
More informationSeries 20 Axial Piston Pumps. Technical Information
Series 20 Axial Piston Pumps Technical Information General Description INTRODUCTION Sauer-Danfoss a world leader in hydraulic power systems has developed a family of axial piston pumps. DESCRIPTION Sauer-Danfoss
More informationVL-VR bar. p p p. 51. Pressure bar
VL-VR In-line valves - Regulating valves 700-1000 - 00-3000 bar Pressure 700-3000 bar FEATURES These valves provide the means to control cylinders and actuators operating at pressures of 700, 1000, 00
More informationFour-Quadrant Multi-Fluid Pump/Motor
Georgia Institute of Technology Marquette University Milwaukee School of Engineering North Carolina A&T State University Purdue University University of California, Merced University of Illinois, Urbana-Champaign
More informationSeries 20 Axial Piston Pumps. Technical Information
Series 20 Axial Piston Pumps Technical Information General Description INTRODUCTION Sauer-Danfoss a world leader in hydraulic power systems has developed a family of axial piston pumps. DESCRIPTION Sauer-Danfoss
More informationFLOW CONTROLS. Maximum Flow U.S.GPM Maximum Operating Pressure MPa (PSI) Graphic Symbols. Page. Valve Type.
FLOW CONTROLS Valve Type Graphic Symbols Maximum Operating Pressure MPa (PSI) Maximum Flow U.S.GPM 5 5 5 5 5 5 5 Page Flow Control Valves (5) 77 Flow Control and Check Valves (5) 77 Pilot Operated Flow
More informationAccessories Series PSB. Specifications
Catalog HY14-252/US Technical Information General Description electrohydraulic pressure switches are high performance devices that provide an electrical signal when sensed pressure rises above or falls
More informationRE / Check-Q-meter type FD, series 2X. Ordering details FD 2X / V * Symbols 1/8. Replaces: 03.92
RE 1/09.9 1/03.9 Check-Q-meter type FD, series Sizes 1, 1,, 3 Up to 0 L/min Up to 30 bar RE 1/09.9 Replaces: 03.9 Features: For installation in manifolds (cartridge valve), With SE flanged ports, For sub-plate
More informationLOGIC POPPET VALVES AND CARTRIDGE MANIFOLD SYSTEMS
Fluid Power Specialist Since 1948 LOGIC POPPET VALVES AND CARTRIDGE MANIFOLD SYSTEMS Copyright 2019, Almo Manifold & Tool Co. All rights reserved. All attempts have been made to make the information in
More informationDirectional Control Valves
Overview HYDAC offers several functions of the Directional Control Cartridges. HYDAC Manually operated position, - way normally closed, spring return, directional valve features poppet design. It offers
More informationUŽSISAKYKITE internetu telefonu el. paštu
Features Axial piston pump MA10VO in swashplate design is used in open loop circuits. Flow is proportional to drive speed and displacement. By adjusting the position of the swashplate it is possible to
More informationGoTo Europe Focused Delivery Program. Product overview industrial and mobile hydraulics
GoTo Europe Focused Delivery Program Product overview industrial and mobile hydraulics 2 GoTo Europe The products I need when I need them In today s global competition every day counts. Fast response times
More informationCheck Valves, Size Spherical Poppet-type, Screw-in Design Series RKVE l/min, 350 bar (500 bar)
Check Valves, Size 04... 40 Spherical Poppet-type, Screw-in Design Series RKVE... 360 l/min, 350 bar (500 bar) 1 General 1.1 Product description Series RKVE units are screw-in check valves with mounting
More informationPost-Compensated Proportional Valve CV2000LS
www.nimco-controls.com Post-Compensated Proportional Valve CV2000LS Smart Solutions... for the Future Contents Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16
More informationServo-operated 2/2-way solenoid valves Type EV220A
Data sheet Servo-operated 2/2-way solenoid valves Type is a compact servo-operated 2/2-way solenoid valve program, especially designed for use in machines and equipment with limited space. Features and
More informationWarnings and Cautions
Warnings and Cautions WARNINGS: APPLICATION 1. ARO valves are designed for use only in industrial pneumatic (air) and / or vacuum systems applications and are NOT to be used for individual consumer use,
More informationThe MP-Series of Hydraulic Pressure Intensifiers
The MP-Series of Hydraulic Pressure Intensifiers Applications: Hydraulic Workholding on Machine Tools Static and Impulse Testing Equipment Hydraulic Power Packs Stone Chrushing Machines Subsea R.O.V. s
More informationHand Operated Hydraulic Pumps PHP121DAH65 PHP121DA95. Engineering & Manufacturing Solutions
Engineering & Manufacturing Solutions HP Specifications: Volume Displacement HP22SA 0.20 in3 (3.3 cm3) (When handle is pulled). HP61DA 0.60 in3 (9.8 cm3) per full cycle. HP121DA 1.20 in3 (19.7 cm3) per
More informationDirectional Control Valves
Directional Control Valves Operating pressure: Flow rate: 3-chamber, electrically controlled 4/3- or 4/2-way directional control valve. Direct-activated by solenoids with screwed-in wet pin armature. Standard
More informationAngle Seat Valve /2" up to 3"
1/ up to up to 428 F Pneumatically operated angle seat valve for the control of neutral and aggressive gases, liquids and steam. Compact design For temperatures from -22 F up to +428 F Working pressure
More informationTecnopoint srl Tel Fax
Tecnopoint srl Tel 01-767086 Fax 01-76678 info@tecnopointonline.it http://www.tecnopointonline.it 81 Pneumatically operated 3 port valves. Series SYJA500/700 Part number SYJA512-M5 SYJA712-01F SYJA522-M5
More informationThrottle check valve. Type Z2FS. Size 16 Component series 3X Maximum operating pressure 350 bar [5076 psi] Maximum flow 250 l/min [66 US gpm]
hrottle check valve ype Z2FS Size 6 Component series 3X Maximum operating pressure 350 bar [5076 psi] Maximum flow 250 l/min [66 US gpm] tb022 able of contents Content Page Features Ordering code 2 Symbols
More informationDirectional Control Valve CV550
www.nimco-controls.com Directional Control Valve CV550 Smart Solutions... for the Future Contents Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 16 Page 17 Page 18 Page
More informationService Data Vickers. Directional Controls. Pilot Operated Directional Control Valves DG5S4-10**-*-*-53 I-3624-S. Revised 9/1/86
Service Data Vickers Directional Controls Pilot Operated Directional Control Valves DG5S4-10**-*-*-53 Revised 9/1/86 I-3624-S Installation Table A DG5S4-10**-53 Does DG5S4-10**-E-53 Not DG5S4-10**-X-53
More informationHYDRAULIC VARIABLE PUMPS
HYDRAULIC VARIABLE S EFFICIENT VARIABLE DELIVERY Checkball pump delivery is controlled by variable inlet ports in each piston pumping chamber. In these hydraulic variable models, output is regulated by
More informationThrottle check valve. RE 27518/10.07 Replaces: Type Z2FS
Throttle check valve RE 758/0.07 Replaces: 0.03 /8 Type ZFS Size 0 Component series 3X Maximum operating pressure 35 bar [4569 psi] Maximum flow 60 l/min [4.3 US gpm] H5556 Table of contents Content Page
More informationVane Pumps. VMQ Series Vane Pumps For Industrial and Mobile Applications Displacements to 215 cm 3/ r (13.12 in 3 /r) Pressures to 260 bar (3800 psi)
Vickers Vane Pumps VMQ Series Vane Pumps For Industrial and Mobile Applications Displacements to 215 cm 3/ r (13.12 in 3 /r) Pressures to 260 bar (3800 psi) 5008.00/EN/0596/A A.25 Introduction From the
More informationSPEED CONTROLLERS WITH QUICK FITTINGS
SPEED CONTROLLERS WITH QUICK FITTINGS Union Straight Type Fittings for controlling the speed of actuators, such as cylinders. Superior flow rate characteristics and fine tuning adjustments in the low flow
More informationCommon Rail Injector
Common Rail Injector Installation Instructions & Information Common Rail Injector General Information WARNING WARNING CAUTION Fuel may be returned at highly elevated temperatures. Wear safety glasses and
More informationOperation and Maintenance Instructions for Bettis GVO-C Series GVO-CLP-SR Pneumatic Actuators
Part Number: GVO-CLP-SR.IOM.1003, Rev. 0 Release: March 2016 Operation and Maintenance Instructions for Bettis GVO-C Series GVO-CLP-SR Pneumatic Actuators Part Number: GVO-CLP-SR.IOM.1003, Rev. 0 Table
More informationContinuous Run Vent Unloaders
Continuous Run Vent Unloaders Mark 2 Load Genie The LGM 20 - Mark II is a self-contained unloading valve, which can be used wherever a continuous run compressor is required. The compressor may need to
More informationTest Which component has the highest Energy Density? A. Accumulator. B. Battery. C. Capacitor. D. Spring.
Test 1 1. Which statement is True? A. Pneumatic systems are more suitable than hydraulic systems to drive powerful machines. B. Mechanical systems transfer energy for longer distances than hydraulic systems.
More informationMODULES. Maximum Flow U.S.GPM. Max. Operating Pressure MPa (PSI) L/min. 005 Series 25 (3630) Modular Valves. 01 Series 31.
F MODULES YUKEN's are stack type valves, and require no piping. They not only rationalise system build, but they also meet the technical requirements for a variety of hydraulic systems. Stacking systems
More informationAxial piston variable pump (A)A4VSO
Axial piston variable pump (A)A4VSO RA 92050-A/06.09 1/64 Replaces: 09.97 Data sheet Series 10, 11 and 30 Size 40...1000 Nominal pressure 5100 psi (350 bar) Peak pressure 5800 psi (400 bar) Open circuit
More informationPressure relief valve, pilot operated
Pressure relief valve, pilot operated RE 576/05. Replaces: 0.03 /0 Type ZDB and ZDB Size 0 Component series 4X Maximum operating pressure 35 bar [4600 psi] Maximum flow 00 l/min [6.4 US gpm] H7747 Table
More informationRA / Internal Gear Pump Model GP3, Series 3X Fixed Displacement. Typical application:
Sizes 20 to 32 Internal Gear Pump Model GP3, Series 3X Fixed Displacement up to 5076 PSI 1.25 to 1.98 in 3 (350 bar) (20.6 to 32.5 cm 3 ) RA 10 234/07.97 Characteristics: Peak pressure of up to 5.076 PSI
More informationVA/VG Series On/Off and Shut-off Valve
VA/VG Series On/Off and Shut-off DVAVG862X02 Specifications For other materials or modifications, please consult TESCOM. PARAMETERS Pressure rating per criteria of ANSI/ASME B3.3 Maximum Operating Pressure
More informationCOMPACT HYDRAULIC PUNCHER
INSTRUCTION MANUAL COMPACT HYDRAULIC PUNCHER Art. 21 67 50 DIN EN ISO 9001 QZERTIFIKAT...convincing solutions 1. TECHNICAL CHARACTERISTICS Maximum cutting capacity: Ø 60 mm. 3 mm thick steel plate 46 x
More informationV Series AXIAL PISTON PUMP ORDER CODE
V Series AXIAL PISTON PUMP ORDER CODE V 15 A 1 R B S - A 1 D X A 11 Customers demand Pump Series V Links Type (only V 15-18): none - Standard A - SAE A 2 bolts Ma. Displacement (cm 3 /n): 15, 18, 23, 25,
More informationDA/SR. Pneumatic Rotary Actuators FEATURES VALBIA ISO 9001 CERTIFIED
VALBIA ISO 9001 CERTIFIED FEATURES Twin Rack and Pinion Design Constant Torque Output Compact Design Balanced Internal Forces Robust Design For Long Life Extruded Aluminum Body Hard Coat Anodized Smooth
More informationDirect Operated Type Directional and Flow Control Valves
Specifications igh Response Type Proportional Electro-ydraulic Directional and Flow Control Valves igh response, high precision and high reliability are achieved be a combination of a compact and powerful
More informationNessie 2/2 way Solenoid valves for High Pressures and High Temperatures, type VDHT
Nessie 2/2 way Solenoid valves for High Pressures and High Temperatures, type VDHT Valve program for small and medium flows: VDHT 3/8 E 2/2 VDHT 1/2 E 2/2 VDHT 3/8 EA 2/2 VDHT 1/2 EA 2/2 Valve program
More informationCheck Valve, Model : RHD/RHZ/RHV/RHF
escription Poppet type valves. Allows free flow from port A to and offer leakage free closure in opposite direction. Four basic models : RH, RHZ, RHV and RHF Seven standard sizes : N, N 8, N 1, N 15, N,
More informationDIRECTIONAL CONTROL (LD) DIRECTIONAL AND FLOW CONTROL (LD) SOLENOID OPERATED DIRECTIONAL
Pu. EC-01 DIRECTIONL CONTROL (LD) DIRECTIONL ND FLOW CONTROL (LD) SOLENOID OPERTED DIRECTIONL CONTROL (LDS) RELIEF (L) / SOLENOID CONTROLLED RELIEF (LS) VLVES Up to 31.5 MPa (4570 PSI), 5500 L / min (1453
More informationUSA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:
SPECIFICATIONS Pressure Compensated Checkball Piston Pumps Also refer to "Checkball Pump Installation and Operating Recommendations" Bulletin PSI.CB (dynexpumpinstallation.pdf) CONTACT INFORMATION USA
More informationV050 SERIES DIRECTIONAL CONTROL VALVE
V5 SERIES DIRECTIONAL CONTROL VALVE TAKE CONTROL Take control with Muncie Power Products V5 directional control valve. The V5 is constructed with high-grade iron castings and nickel-plated spools for use
More informationDMH085** Series will be available January 1, Catalog HY /US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO.
Catalog HY-/US Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. /GPM BAR/PSI DL8... C8-... Position, Way, N.C. Poppet,... Pull to Open.../8... /... DL... C-... Position, Way, N.C. Poppet,... Pull
More informationPILOT OPERATED SEQUENCE VALVE - Series VR4S
PILOT OPERTED SEQUENCE VLVE - Series VRS Veljan Sequence Valve Series VRS are pilot operated controls and enable a hydraulic system to operate a sequence. Fluid is allowed to pass to a secondary system
More informationWorkholding. Machining center clamping Clamping fixtures Welding fixtures Fully integrated systems. Product information
Product information Workholding Machining center clamping Clamping fixtures Welding fixtures Fully integrated systems Horizontal machining center Clamping unit Power pack Paper coating Grinding machine
More informationOpen Center Compact Valve Custom Installation Guide Rev A
200-0762-01 Open Center Compact Valve Custom Installation Guide 602-0575-01 Rev A 2014-12 Overview This guide provides information for completing a custom AutoSteer valve installation on wheeled farm vehicles
More informationVER*SP CONTINENTAL HYDRAULICS PROPORTIONAL PILOT RELIEF VALVES VER*SP - PROPORTIONAL PILOT RELIEF VALVES
CONTINENTAL HYDRAULICS VER*SP PROPORTIONAL PILOT RELIEF VALVES 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM DURABLE VER*SP PROPORTIONAL PILOT RELIEF VALVES
More informationMTC Series. Double Acting and Spring Return Actuator and Accessories. MasterTorq. Pneumatic Actuators. Atex Class 2
Double Acting and Spring Return Actuator and Accessories MTC Series TM Pneumatic Actuators Atex Class Operations Double Acting A B A B By supplying air to Port A, pressure is applied to the center chamber
More informationLUDV control block in mono block/sandwich plate design M7-20
LUDV control block in mono block/sandwich plate design M7-20 RE 64293 Edition: 06.2013 Replaces:. Size 20 Series 3X Maximum operating pressure On the pump side 380 bar On the actuator side 420 bar Maximum
More informationStandard Power Units Start-Up and Maintenance
Standard Power Units Start-Up and Maintenance Value-Pak System-Pak System Pak-Plus Low-Pak System-Center System-L System-Overhead Table of Contents General Information....................................................................
More informationKuhnke Technical Data. Contact Details
Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have
More informationDOUBLE, P.O. CHECK VALVES (PRE-ENGINEERED BLOCKS)
DOUBLE, P.O. CHECK VALVES (PRE-ENGINEERED BLOCKS) SERIES DOUBLE PILOT OPERATED CHECK VALVE... HS3 Page HD1 Page HD2 SERIES DOUBLE PILOT OPERATED CHECK VALVE GPM PSI LPM BAR CAVITY MODEL PAGE 5 3500 19
More informationFLOW CONTROL VALVES A5-1 PN# / / ACC
FLOW CONTROL VLVES Flow Control Valves The HYDC family of flow control valves permit safe, simple and repeatable control of hydraulic fluids at operating pressures to psi. The standard slotted control
More informationBML S K IFP BML HIGH TORQUE LOW SPEED MOTORS. Model code. Model. High Performance in an economical package
IFP HIGH TORQUE LOW SPEED MOTORS High Performance in an economical package International motors provide high output torque from an efficient compact design. Motors are available with displacements from
More informationInstallation of the DD13,DD15, and DD16 Cylinder Head February Installation of the DD13 Cylinder Head
5 02-12Rev 1 5 02-12Rev SUBJECT DATE Installation of the DD13,DD15, and DD16 Cylinder Head February 2013 Additions, Revisions, or Updates Publication Number / Title Platform Section Title Change Installation
More informationRemoval and Installation of Fuel Injection Pumps
Page 16 of 126 worn considerably. Fig. C shows how the flat end of a new plunger makes poor contact with a worn lifter, resulting in rapid wear to both parts. An injection pump can have a good fuel flow
More informationEURO BEAD BREAKER MODEL # Instruction Manual Parts Breakdown
EURO BEAD BREAKER MODEL #10107 Instruction Manual Parts Breakdown Operation WARNING The optional air/hydraulic pump is capable of generating fluid pressure up to 10,000 PSI. Keep both hands on the handles
More informationIFP VTM42 POWER STEERING PUMPS
IFP VTM42 POWER STEERING PUMPS * Compact Power Source for Steering Assemblies * Integral Relief and Flow Control * High Efficiency * Balanced Cartridge Design * Quiet Operation IFP Power Steering Pump
More informationMobile Valves Proportional - Load Sensing
Mobile Valves Proportional - Load Sensing Model CML60 325 bar 60 L/min Up to 8 sections Eaton F(x) Compliant Table of Contents General Information... 3 Model Code Valve Section... 4 Valve Assembly... 5
More informationFilling valve sandwich plate
Filling valve sandwich plate RE 0478/08. Replaces: 06.06 /4 Type ZSF and ZSFW Size to 00 Component series ; Maximum operating pressure 50 bar Flow up to 7000 l/min ( p = 0. bar) Table of contents Contents
More information